From fa59507f720077a856c9952a31cfd45cd97ef6f9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 30 Mar 2016 12:56:28 +0300 Subject: usb: otg-fsm: Add documentation for struct otg_fsm struct otg_fsm is the interface to the OTG state machine. Document the input, output and internal state variables. Definations are taken from Table 7-2 and Table 7-4 of the USB OTG & EH Specification Rev.2.0 Re-arrange some of the members as per use case for more clarity. Signed-off-by: Roger Quadros Acked-by: Peter Chen Signed-off-by: Peter Chen --- include/linux/usb/otg-fsm.h | 90 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 83 insertions(+), 7 deletions(-) (limited to 'include/linux/usb') diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index 24198e16f849..8eec0c261be5 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -72,37 +72,113 @@ enum otg_fsm_timer { NUM_OTG_FSM_TIMERS, }; -/* OTG state machine according to the OTG spec */ +/** + * struct otg_fsm - OTG state machine according to the OTG spec + * + * OTG hardware Inputs + * + * Common inputs for A and B device + * @id: TRUE for B-device, FALSE for A-device. + * @adp_change: TRUE when current ADP measurement (n) value, compared to the + * ADP measurement taken at n-2, differs by more than CADP_THR + * @power_up: TRUE when the OTG device first powers up its USB system and + * ADP measurement taken if ADP capable + * + * A-Device state inputs + * @a_srp_det: TRUE if the A-device detects SRP + * @a_vbus_vld: TRUE when VBUS voltage is in regulation + * @b_conn: TRUE if the A-device detects connection from the B-device + * @a_bus_resume: TRUE when the B-device detects that the A-device is signaling + * a resume (K state) + * B-Device state inputs + * @a_bus_suspend: TRUE when the B-device detects that the A-device has put the + * bus into suspend + * @a_conn: TRUE if the B-device detects a connection from the A-device + * @b_se0_srp: TRUE when the line has been at SE0 for more than the minimum + * time before generating SRP + * @b_ssend_srp: TRUE when the VBUS has been below VOTG_SESS_VLD for more than + * the minimum time before generating SRP + * @b_sess_vld: TRUE when the B-device detects that the voltage on VBUS is + * above VOTG_SESS_VLD + * @test_device: TRUE when the B-device switches to B-Host and detects an OTG + * test device. This must be set by host/hub driver + * + * Application inputs (A-Device) + * @a_bus_drop: TRUE when A-device application needs to power down the bus + * @a_bus_req: TRUE when A-device application wants to use the bus. + * FALSE to suspend the bus + * + * Application inputs (B-Device) + * @b_bus_req: TRUE during the time that the Application running on the + * B-device wants to use the bus + * + * Auxilary inputs (OTG v1.3 only. Obsolete now.) + * @a_sess_vld: TRUE if the A-device detects that VBUS is above VA_SESS_VLD + * @b_bus_suspend: TRUE when the A-device detects that the B-device has put + * the bus into suspend + * @b_bus_resume: TRUE when the A-device detects that the B-device is signaling + * resume on the bus + * + * OTG Output status. Read only for users. Updated by OTG FSM helpers defined + * in this file + * + * Outputs for Both A and B device + * @drv_vbus: TRUE when A-device is driving VBUS + * @loc_conn: TRUE when the local device has signaled that it is connected + * to the bus + * @loc_sof: TRUE when the local device is generating activity on the bus + * @adp_prb: TRUE when the local device is in the process of doing + * ADP probing + * + * Outputs for B-device state + * @adp_sns: TRUE when the B-device is in the process of carrying out + * ADP sensing + * @data_pulse: TRUE when the B-device is performing data line pulsing + * + * Internal Variables + * + * a_set_b_hnp_en: TRUE when the A-device has successfully set the + * b_hnp_enable bit in the B-device. + * Unused as OTG fsm uses otg->host->b_hnp_enable instead + * b_srp_done: TRUE when the B-device has completed initiating SRP + * b_hnp_enable: TRUE when the B-device has accepted the + * SetFeature(b_hnp_enable) B-device. + * Unused as OTG fsm uses otg->gadget->b_hnp_enable instead + * a_clr_err: Asserted (by application ?) to clear a_vbus_err due to an + * overcurrent condition and causes the A-device to transition + * to a_wait_vfall + */ struct otg_fsm { /* Input */ int id; int adp_change; int power_up; - int test_device; - int a_bus_drop; - int a_bus_req; int a_srp_det; int a_vbus_vld; int b_conn; int a_bus_resume; int a_bus_suspend; int a_conn; - int b_bus_req; int b_se0_srp; int b_ssend_srp; int b_sess_vld; + int test_device; + int a_bus_drop; + int a_bus_req; + int b_bus_req; + /* Auxilary inputs */ int a_sess_vld; int b_bus_resume; int b_bus_suspend; /* Output */ - int data_pulse; int drv_vbus; int loc_conn; int loc_sof; int adp_prb; int adp_sns; + int data_pulse; /* Internal variables */ int a_set_b_hnp_en; @@ -110,7 +186,7 @@ struct otg_fsm { int b_hnp_enable; int a_clr_err; - /* Informative variables */ + /* Informative variables. All unused as of now */ int a_bus_drop_inf; int a_bus_req_inf; int a_clr_err_inf; -- cgit v1.2.3 From 4e332df63487418ec512c3c376c07df9ab3ae035 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 30 Mar 2016 12:56:29 +0300 Subject: usb: otg-fsm: support multiple instances Move the state_changed variable into struct otg_fsm so that we can support multiple instances. Signed-off-by: Roger Quadros Acked-by: Peter Chen Signed-off-by: Peter Chen --- drivers/usb/common/usb-otg-fsm.c | 10 ++++------ include/linux/usb/otg-fsm.h | 1 + 2 files changed, 5 insertions(+), 6 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 504708f59b93..9059b7dc185e 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -61,8 +61,6 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) return 0; } -static int state_changed; - /* Called when leaving a state. Do state clean up jobs here */ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) { @@ -208,7 +206,6 @@ static void otg_start_hnp_polling(struct otg_fsm *fsm) /* Called when entering a state */ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) { - state_changed = 1; if (fsm->otg->state == new_state) return 0; VDBG("Set state: %s\n", usb_otg_state_string(new_state)); @@ -324,6 +321,7 @@ static int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) } fsm->otg->state = new_state; + fsm->state_changed = 1; return 0; } @@ -335,7 +333,7 @@ int otg_statemachine(struct otg_fsm *fsm) mutex_lock(&fsm->lock); state = fsm->otg->state; - state_changed = 0; + fsm->state_changed = 0; /* State machine state change judgement */ switch (state) { @@ -448,7 +446,7 @@ int otg_statemachine(struct otg_fsm *fsm) } mutex_unlock(&fsm->lock); - VDBG("quit statemachine, changed = %d\n", state_changed); - return state_changed; + VDBG("quit statemachine, changed = %d\n", fsm->state_changed); + return fsm->state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); diff --git a/include/linux/usb/otg-fsm.h b/include/linux/usb/otg-fsm.h index 8eec0c261be5..7a0350535cb1 100644 --- a/include/linux/usb/otg-fsm.h +++ b/include/linux/usb/otg-fsm.h @@ -210,6 +210,7 @@ struct otg_fsm { struct mutex lock; u8 *host_req_flag; struct delayed_work hnp_polling_work; + bool state_changed; }; struct otg_fsm_ops { -- cgit v1.2.3 From 679ca39fc670a5a95c2b40d2cc8cf2cee2486f7a Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 18 Apr 2016 16:53:39 +0900 Subject: usb: gadget: udc: core: add usb_gadget_{un}map_request_by_dev() If the following environment, the first argument of DMA API should be set to a DMAC's device structure, not a udc controller's one. - A udc controller needs an external DMAC device (like a DMA Engine). - The external DMAC enables IOMMU. So, this patch add usb_gadget_{un}map_request_by_dev() API to set a DMAC's device structure by a udc controller driver. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/udc-core.c | 24 ++++++++++++++++++------ include/linux/usb/gadget.h | 4 ++++ 2 files changed, 22 insertions(+), 6 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index c6e76465065a..6e8300d6a737 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -61,11 +61,9 @@ static int udc_bind_to_driver(struct usb_udc *udc, #ifdef CONFIG_HAS_DMA -int usb_gadget_map_request(struct usb_gadget *gadget, +int usb_gadget_map_request_by_dev(struct device *dev, struct usb_request *req, int is_in) { - struct device *dev = gadget->dev.parent; - if (req->length == 0) return 0; @@ -92,24 +90,38 @@ int usb_gadget_map_request(struct usb_gadget *gadget, return 0; } +EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev); + +int usb_gadget_map_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in) +{ + return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in); +} EXPORT_SYMBOL_GPL(usb_gadget_map_request); -void usb_gadget_unmap_request(struct usb_gadget *gadget, +void usb_gadget_unmap_request_by_dev(struct device *dev, struct usb_request *req, int is_in) { if (req->length == 0) return; if (req->num_mapped_sgs) { - dma_unmap_sg(gadget->dev.parent, req->sg, req->num_mapped_sgs, + dma_unmap_sg(dev, req->sg, req->num_mapped_sgs, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); req->num_mapped_sgs = 0; } else { - dma_unmap_single(gadget->dev.parent, req->dma, req->length, + dma_unmap_single(dev, req->dma, req->length, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); } } +EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev); + +void usb_gadget_unmap_request(struct usb_gadget *gadget, + struct usb_request *req, int is_in) +{ + usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in); +} EXPORT_SYMBOL_GPL(usb_gadget_unmap_request); #endif /* CONFIG_HAS_DMA */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 5d4e151c49bf..457651bf45b0 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1223,9 +1223,13 @@ int usb_otg_descriptor_init(struct usb_gadget *gadget, /* utility to simplify map/unmap of usb_requests to/from DMA */ +extern int usb_gadget_map_request_by_dev(struct device *dev, + struct usb_request *req, int is_in); extern int usb_gadget_map_request(struct usb_gadget *gadget, struct usb_request *req, int is_in); +extern void usb_gadget_unmap_request_by_dev(struct device *dev, + struct usb_request *req, int is_in); extern void usb_gadget_unmap_request(struct usb_gadget *gadget, struct usb_request *req, int is_in); -- cgit v1.2.3 From feb26ac31a2a5cb88d86680d9a94916a6343e9e6 Mon Sep 17 00:00:00 2001 From: Chris Bainbridge Date: Mon, 25 Apr 2016 13:48:38 +0100 Subject: usb: core: hub: hub_port_init lock controller instead of bus The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [] schedule+0x37/0x90 [] usb_kill_urb+0x8d/0xd0 [] ? wake_up_atomic_t+0x30/0x30 [] usb_start_wait_urb+0xbe/0x150 [] usb_control_msg+0xbc/0xf0 [] hub_port_init+0x51e/0xb70 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Call Trace: [] xhci_setup_device+0x53d/0xa40 [] xhci_address_device+0xe/0x10 [] hub_port_init+0x1bf/0xb70 [] ? trace_hardirqs_on+0xd/0x10 [] hub_event+0x817/0x1570 [] process_one_work+0x1ff/0x620 [] ? process_one_work+0x15f/0x620 [] worker_thread+0x64/0x4b0 [] ? rescuer_thread+0x390/0x390 [] kthread+0x105/0x120 [] ? kthread_create_on_node+0x200/0x200 [] ret_from_fork+0x3f/0x70 [] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge Cc: stable Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 15 +++++++++++++-- drivers/usb/core/hub.c | 8 ++++---- include/linux/usb.h | 3 +-- include/linux/usb/hcd.h | 1 + 4 files changed, 19 insertions(+), 8 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 2ca2cef7f681..980fc5774151 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -994,7 +994,7 @@ static void usb_bus_init (struct usb_bus *bus) bus->bandwidth_allocated = 0; bus->bandwidth_int_reqs = 0; bus->bandwidth_isoc_reqs = 0; - mutex_init(&bus->usb_address0_mutex); + mutex_init(&bus->devnum_next_mutex); } /*-------------------------------------------------------------------------*/ @@ -2521,6 +2521,14 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, return NULL; } if (primary_hcd == NULL) { + hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex), + GFP_KERNEL); + if (!hcd->address0_mutex) { + kfree(hcd); + dev_dbg(dev, "hcd address0 mutex alloc failed\n"); + return NULL; + } + mutex_init(hcd->address0_mutex); hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), GFP_KERNEL); if (!hcd->bandwidth_mutex) { @@ -2532,6 +2540,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, dev_set_drvdata(dev, hcd); } else { mutex_lock(&usb_port_peer_mutex); + hcd->address0_mutex = primary_hcd->address0_mutex; hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; hcd->primary_hcd = primary_hcd; primary_hcd->primary_hcd = primary_hcd; @@ -2598,8 +2607,10 @@ static void hcd_release(struct kref *kref) struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); mutex_lock(&usb_port_peer_mutex); - if (usb_hcd_is_primary_hcd(hcd)) + if (usb_hcd_is_primary_hcd(hcd)) { + kfree(hcd->address0_mutex); kfree(hcd->bandwidth_mutex); + } if (hcd->shared_hcd) { struct usb_hcd *peer = hcd->shared_hcd; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c2270d8fac12..bee13517676f 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2082,7 +2082,7 @@ static void choose_devnum(struct usb_device *udev) struct usb_bus *bus = udev->bus; /* be safe when more hub events are proceed in parallel */ - mutex_lock(&bus->usb_address0_mutex); + mutex_lock(&bus->devnum_next_mutex); if (udev->wusb) { devnum = udev->portnum + 1; BUG_ON(test_bit(devnum, bus->devmap.devicemap)); @@ -2100,7 +2100,7 @@ static void choose_devnum(struct usb_device *udev) set_bit(devnum, bus->devmap.devicemap); udev->devnum = devnum; } - mutex_unlock(&bus->usb_address0_mutex); + mutex_unlock(&bus->devnum_next_mutex); } static void release_devnum(struct usb_device *udev) @@ -4366,7 +4366,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, if (oldspeed == USB_SPEED_LOW) delay = HUB_LONG_RESET_TIME; - mutex_lock(&hdev->bus->usb_address0_mutex); + mutex_lock(hcd->address0_mutex); /* Reset the device; full speed may morph to high speed */ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */ @@ -4652,7 +4652,7 @@ fail: hub_port_disable(hub, port1, 0); update_devnum(udev, devnum); /* for disconnect processing */ } - mutex_unlock(&hdev->bus->usb_address0_mutex); + mutex_unlock(hcd->address0_mutex); return retval; } diff --git a/include/linux/usb.h b/include/linux/usb.h index 7824f4557d50..01b6c61cf9bb 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -374,13 +374,12 @@ struct usb_bus { int devnum_next; /* Next open device number in * round-robin allocation */ + struct mutex devnum_next_mutex; /* devnum_next mutex */ struct usb_devmap devmap; /* device address allocation map */ struct usb_device *root_hub; /* Root hub */ struct usb_bus *hs_companion; /* Companion EHCI bus, if any */ - struct mutex usb_address0_mutex; /* unaddressed device mutex */ - int bandwidth_allocated; /* on this bus: how much of the time * reserved for periodic (intr/iso) * requests is used, on average? diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index b98f831dcda3..66fc13705ab7 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -181,6 +181,7 @@ struct usb_hcd { * bandwidth_mutex should be dropped after a successful control message * to the device, or resetting the bandwidth after a failed attempt. */ + struct mutex *address0_mutex; struct mutex *bandwidth_mutex; struct usb_hcd *shared_hcd; struct usb_hcd *primary_hcd; -- cgit v1.2.3 From f1bddbb3de60872acc2446eee97dbeb0a6d57acb Mon Sep 17 00:00:00 2001 From: Krzysztof Opasiak Date: Thu, 5 May 2016 10:46:05 +0200 Subject: usb: gadget: Fix binding to UDC via configfs interface By default user could store only valid UDC name in configfs UDC attr by doing: echo $UDC_NAME > UDC Commit (855ed04 "usb: gadget: udc-core: independent registration of gadgets and gadget drivers") broke this behavior and allowed to store any arbitrary string in UDC file and udc core was waiting for such controller to appear. echo "any arbitrary string here" > UDC This commit fix this by adding a flag which prevents configfs gadget from being added to list of pending drivers if UDC with given name has not been found. Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 1 + drivers/usb/gadget/udc/udc-core.c | 12 ++++++++---- include/linux/usb/gadget.h | 3 +++ 3 files changed, 12 insertions(+), 4 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index b6f60ca8a035..70cf3477f951 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1401,6 +1401,7 @@ static const struct usb_gadget_driver configfs_driver_template = { .owner = THIS_MODULE, .name = "configfs-gadget", }, + .match_existing_only = 1, }; static struct config_group *gadgets_make( diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index 6e8300d6a737..e1b2dcebdc2e 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -603,11 +603,15 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) } } - list_add_tail(&driver->pending, &gadget_driver_pending_list); - pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", - driver->function); + if (!driver->match_existing_only) { + list_add_tail(&driver->pending, &gadget_driver_pending_list); + pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", + driver->function); + ret = 0; + } + mutex_unlock(&udc_lock); - return 0; + return ret; found: ret = udc_bind_to_driver(udc, driver); mutex_unlock(&udc_lock); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 457651bf45b0..fefe8b06a63d 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -1034,6 +1034,8 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, * this driver will be bound to any available UDC. * @pending: UDC core private data used for deferred probe of this driver. + * @match_existing_only: If udc is not found, return an error and don't add this + * gadget driver to list of pending driver * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -1097,6 +1099,7 @@ struct usb_gadget_driver { char *udc_name; struct list_head pending; + unsigned match_existing_only:1; }; -- cgit v1.2.3 From 12b7db2bf8b88938798c60416172b53225207b1f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 31 May 2016 10:05:19 -0500 Subject: usb: musb: Return error value from musb_mailbox At least on n900 we have phy-twl4030-usb only generating cable interrupts, and then have a separate USB PHY. In order for musb to know the real cable status, we need to clear any cached state until musb is ready. Otherwise the cable status interrupts will get just ignored if the status does not change from the initial state. To do this, let's add a return value to musb_mailbox(), and reset cached linkstat to MUSB_UNKNOWN on error. Sorry to cause a bit of churn here, I should have added that already last time patching musb_mailbox(). Signed-off-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/phy/phy-twl4030-usb.c | 14 ++++++++++---- drivers/usb/musb/musb_core.c | 7 ++++--- drivers/usb/musb/musb_core.h | 2 +- drivers/usb/musb/omap2430.c | 8 +++++--- drivers/usb/phy/phy-twl6030-usb.c | 12 +++++++++--- include/linux/usb/musb.h | 5 +++-- 6 files changed, 32 insertions(+), 16 deletions(-) (limited to 'include/linux/usb') diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 6b6af6cba454..d9b10a39a2cf 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy) twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); return 0; } @@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) struct twl4030_usb *twl = _twl; enum musb_vbus_id_status status; bool status_changed = false; + int err; status = twl4030_usb_linkstat(twl); @@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); } - musb_mailbox(status); + err = musb_mailbox(status); + if (err) + twl->linkstat = MUSB_UNKNOWN; } /* don't schedule during sleep - irq works right then */ @@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy) struct twl4030_usb *twl = phy_get_drvdata(phy); pm_runtime_get_sync(twl->dev); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); @@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev) if (cable_present(twl->linkstat)) pm_runtime_put_noidle(twl->dev); pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put_sync_suspend(twl->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(twl->dev); pm_runtime_disable(twl->dev); /* autogate 60MHz ULPI clock, diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 23888d579e8b..6469eff4fc30 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1679,7 +1679,7 @@ EXPORT_SYMBOL_GPL(musb_dma_completion); #define use_dma 0 #endif -static void (*musb_phy_callback)(enum musb_vbus_id_status status); +static int (*musb_phy_callback)(enum musb_vbus_id_status status); /* * musb_mailbox - optional phy notifier function @@ -1688,11 +1688,12 @@ static void (*musb_phy_callback)(enum musb_vbus_id_status status); * Optionally gets called from the USB PHY. Note that the USB PHY must be * disabled at the point the phy_callback is registered or unregistered. */ -void musb_mailbox(enum musb_vbus_id_status status) +int musb_mailbox(enum musb_vbus_id_status status) { if (musb_phy_callback) - musb_phy_callback(status); + return musb_phy_callback(status); + return -ENODEV; }; EXPORT_SYMBOL_GPL(musb_mailbox); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 29473846b098..b55a776b03eb 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -215,7 +215,7 @@ struct musb_platform_ops { dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); - void (*phy_callback)(enum musb_vbus_id_status status); + int (*phy_callback)(enum musb_vbus_id_status status); }; /* diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index d312d42592d6..2c54f52ae386 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -180,22 +180,24 @@ static void omap2430_set_power(struct musb *musb, bool enabled, bool cable) } } -static void omap2430_musb_mailbox(enum musb_vbus_id_status status) +static int omap2430_musb_mailbox(enum musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; if (!glue) { pr_err("%s: musb core is not yet initialized\n", __func__); - return; + return -EPROBE_DEFER; } glue->status = status; if (!glue_to_musb(glue)) { pr_err("%s: musb core is not yet ready\n", __func__); - return; + return -EPROBE_DEFER; } schedule_work(&glue->omap_musb_mailbox_work); + + return 0; } static void omap_musb_set_mailbox(struct omap2430_glue *glue) diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 24e2b3cf1867..c66a447c3dfe 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -227,12 +227,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) twl->asleep = 1; status = MUSB_VBUS_VALID; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { if (twl->linkstat != MUSB_UNKNOWN) { status = MUSB_VBUS_OFF; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; if (twl->asleep) { regulator_disable(twl->usb3v3); twl->asleep = 0; @@ -264,7 +268,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = MUSB_ID_GROUND; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 0b3da40a525e..d315c8907869 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -142,10 +142,11 @@ enum musb_vbus_id_status { }; #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) -void musb_mailbox(enum musb_vbus_id_status status); +int musb_mailbox(enum musb_vbus_id_status status); #else -static inline void musb_mailbox(enum musb_vbus_id_status status) +static inline int musb_mailbox(enum musb_vbus_id_status status) { + return 0; } #endif -- cgit v1.2.3