From 77af1b2641faf45788a0d480db94082ebee931dc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 17 Mar 2011 13:24:36 +0100 Subject: regulator: add set_voltage_time_sel infrastructure This makes it possible to set the stabilization time for voltage regulators in the same manner as enable_time(). The interface only supports regulators that implements fixed selectors. Cc: Bengt Jonsson Signed-off-by: Linus Walleij Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'include/linux/regulator') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index b8ed16a33c47..6c433b89c80d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -63,7 +63,11 @@ enum regulator_status { * when running with the specified parameters. * * @enable_time: Time taken for the regulator voltage output voltage to - * stabalise after being enabled, in microseconds. + * stabilise after being enabled, in microseconds. + * @set_voltage_time_sel: Time taken for the regulator voltage output voltage + * to stabilise after being set to a new value, in microseconds. + * The function provides the from and to voltage selector, the + * function should return the worst case. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. @@ -103,8 +107,11 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); - /* Time taken to enable the regulator */ + /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_voltage_time_sel) (struct regulator_dev *, + unsigned int old_selector, + unsigned int new_selector); /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs -- cgit v1.2.3