From 0077e9b985482e5c020468c6257f8508f68aa0b2 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Tue, 27 Jan 2026 19:27:02 -0800 Subject: iio: cros_ec: Allow enabling/disabling calibration mode 'calibrate' was a one-shot event sent to the sensor to calibrate itself. It is used on Bosch sensors (BMI160, BMA254). Light sensors work differently: They are first put in calibration mode, tests are run to collect information and calculate the calibration values to apply. Once done, the sensors are put back in normal mode. Accept boolean true and false (not just true) to enter/exit calibration state. Check "echo 0 > calibrate" is supported. Signed-off-by: Gwendal Grignou Reviewed-by: Nick Vaccaro Reviewed-by: Tzung-Bi Shih Signed-off-by: Jonathan Cameron --- include/linux/platform_data/cros_ec_commands.h | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index 69294f79cc88..d363d60bb8a3 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -2598,13 +2598,19 @@ struct ec_params_motion_sense { /* * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA - * and MOTIONSENSE_CMD_PERFORM_CALIB. */ struct __ec_todo_unpacked { uint8_t sensor_num; - } info, info_3, data, fifo_flush, perform_calib, - list_activities; + } info, info_3, data, fifo_flush, list_activities; + /* + * Used for MOTIONSENSE_CMD_PERFORM_CALIB: + * Allow entering/exiting the calibration mode. + */ + struct __ec_todo_unpacked { + uint8_t sensor_num; + uint8_t enable; + } perform_calib; /* * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR * and MOTIONSENSE_CMD_SENSOR_RANGE. -- cgit v1.2.3 From d095d2dbcc8df60ede1674e28ce0f0a478d37535 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Mon, 12 Jan 2026 17:47:58 -0500 Subject: MIPS: copy pic32.h header file from asm/mach-pic32/ to include/platform-data/ There are currently some pic32 MIPS drivers that are in tree, and are only configured to be compiled on the pic32 platform. There's a risk of breaking some of these drivers when migrating drivers away from legacy APIs. It happened to me with a pic32 clk driver. Let's go ahead and copy the MIPS pic32.h header to include/linux/platform_data/, and make a minor update to allow compiling this on other architectures. This will make it easier, and cleaner to enable COMPILE_TEST for some of these pic32 drivers. The asm variant of the header file will be dropped once all drivers have been updated. Link: https://lore.kernel.org/linux-clk/CABx5tq+eOocJ41X-GSgkGy6S+s+Am1yCS099wqP695NtwALTmg@mail.gmail.com/T/ Signed-off-by: Brian Masney Signed-off-by: Thomas Bogendoerfer --- include/linux/platform_data/pic32.h | 39 +++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 include/linux/platform_data/pic32.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/pic32.h b/include/linux/platform_data/pic32.h new file mode 100644 index 000000000000..f0b395fdb784 --- /dev/null +++ b/include/linux/platform_data/pic32.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Joshua Henderson + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. + */ +#ifndef __LINUX_PLATFORM_DATA_PIC32_H +#define __LINUX_PLATFORM_DATA_PIC32_H + +#include + +/* + * PIC32 register offsets for SET/CLR/INV where supported. + */ +#define PIC32_CLR(_reg) ((_reg) + 0x04) +#define PIC32_SET(_reg) ((_reg) + 0x08) +#define PIC32_INV(_reg) ((_reg) + 0x0C) + +/* + * PIC32 Base Register Offsets + */ +#define PIC32_BASE_CONFIG 0x1f800000 +#define PIC32_BASE_OSC 0x1f801200 +#define PIC32_BASE_RESET 0x1f801240 +#define PIC32_BASE_PPS 0x1f801400 +#define PIC32_BASE_UART 0x1f822000 +#define PIC32_BASE_PORT 0x1f860000 +#define PIC32_BASE_DEVCFG2 0x1fc4ff44 + +#if defined(CONFIG_MACH_PIC32) +/* Register unlock sequence required for some register access. */ +void pic32_syskey_unlock_debug(const char *fn, const ulong ln); +#define pic32_syskey_unlock() \ + pic32_syskey_unlock_debug(__func__, __LINE__) +#else +/* COMPILE_TEST on all other architectures */ +#define pic32_syskey_unlock() +#endif + +#endif /* __LINUX_PLATFORM_DATA_PIC32_H */ -- cgit v1.2.3 From 2a7b7652b1bb3fadc3bd47d622bfb127a93ab6b0 Mon Sep 17 00:00:00 2001 From: Leif Skunberg Date: Tue, 10 Feb 2026 14:21:29 +0100 Subject: platform/x86: int3472: Handle GPIO type 0x10 (DOVDD) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472 _DSM returns GPIO type 0x10 for one of the pins, which controls the DOVDD (digital I/O power) regulator enable. Type 0x10 is not currently handled by the driver, causing the GPIO to be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and handle it as a regulator with con_id "dovdd" to match the supply name used by sensor drivers (e.g. ov5675). Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate the "dovdd" name (5 chars + null terminator). Signed-off-by: Leif Skunberg Reviewed-by: Hans de Goede Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/int3472/discrete.c | 7 +++++++ include/linux/platform_data/x86/int3472.h | 5 +++-- 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 1455d9a7afca..1c65ce87cde0 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -223,6 +223,10 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 *con_id = "avdd"; *gpio_flags = GPIO_ACTIVE_HIGH; break; + case INT3472_GPIO_TYPE_DOVDD: + *con_id = "dovdd"; + *gpio_flags = GPIO_ACTIVE_HIGH; + break; case INT3472_GPIO_TYPE_HANDSHAKE: *con_id = "dvdd"; *gpio_flags = GPIO_ACTIVE_HIGH; @@ -251,6 +255,7 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 * 0x0b Power enable * 0x0c Clock enable * 0x0d Privacy LED + * 0x10 DOVDD (digital I/O voltage) * 0x13 Hotplug detect * * There are some known platform specific quirks where that does not quite @@ -332,6 +337,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, case INT3472_GPIO_TYPE_CLK_ENABLE: case INT3472_GPIO_TYPE_PRIVACY_LED: case INT3472_GPIO_TYPE_POWER_ENABLE: + case INT3472_GPIO_TYPE_DOVDD: case INT3472_GPIO_TYPE_HANDSHAKE: gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, con_id, gpio_flags); if (IS_ERR(gpio)) { @@ -356,6 +362,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares, case INT3472_GPIO_TYPE_POWER_ENABLE: second_sensor = int3472->quirks.avdd_second_sensor; fallthrough; + case INT3472_GPIO_TYPE_DOVDD: case INT3472_GPIO_TYPE_HANDSHAKE: ret = skl_int3472_register_regulator(int3472, gpio, enable_time_us, con_id, second_sensor); diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h index b1b837583d54..dbe745dc88d5 100644 --- a/include/linux/platform_data/x86/int3472.h +++ b/include/linux/platform_data/x86/int3472.h @@ -26,6 +26,7 @@ #define INT3472_GPIO_TYPE_POWER_ENABLE 0x0b #define INT3472_GPIO_TYPE_CLK_ENABLE 0x0c #define INT3472_GPIO_TYPE_PRIVACY_LED 0x0d +#define INT3472_GPIO_TYPE_DOVDD 0x10 #define INT3472_GPIO_TYPE_HANDSHAKE 0x12 #define INT3472_GPIO_TYPE_HOTPLUG_DETECT 0x13 @@ -33,8 +34,8 @@ #define INT3472_MAX_SENSOR_GPIOS 3 #define INT3472_MAX_REGULATORS 3 -/* E.g. "avdd\0" */ -#define GPIO_SUPPLY_NAME_LENGTH 5 +/* E.g. "dovdd\0" */ +#define GPIO_SUPPLY_NAME_LENGTH 6 /* 12 chars for acpi_dev_name() + "-", e.g. "ABCD1234:00-" */ #define GPIO_REGULATOR_NAME_LENGTH (12 + GPIO_SUPPLY_NAME_LENGTH) /* lower- and upper-case mapping */ -- cgit v1.2.3 From 3350c2b3f2b8a3b985a020a4ef4f2f050a4b6a1d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 25 Feb 2026 21:12:29 -0800 Subject: platform_data/mlxreg: mlxreg.h: fix all kernel-doc warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the correct kernel-doc format & notation to eliminate kernel-doc warnings: Warning: include/linux/platform_data/mlxreg.h:24 Enum value 'MLX_WDT_TYPE1' not described in enum 'mlxreg_wdt_type' Warning: include/linux/platform_data/mlxreg.h:24 Enum value 'MLX_WDT_TYPE2' not described in enum 'mlxreg_wdt_type' Warning: include/linux/platform_data/mlxreg.h:24 Enum value 'MLX_WDT_TYPE3' not described in enum 'mlxreg_wdt_type' Warning: include/linux/platform_data/mlxreg.h:37 bad line: PHYs ready / unready state; Warning: include/linux/platform_data/mlxreg.h:153 struct member 'np' not described in 'mlxreg_core_data' Warning: include/linux/platform_data/mlxreg.h:153 struct member 'hpdev' not described in 'mlxreg_core_data' Signed-off-by: Randy Dunlap Link: https://patch.msgid.link/20260226051232.549537-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- include/linux/platform_data/mlxreg.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/mlxreg.h b/include/linux/platform_data/mlxreg.h index f6cca7a035c7..50b6be57da66 100644 --- a/include/linux/platform_data/mlxreg.h +++ b/include/linux/platform_data/mlxreg.h @@ -13,10 +13,10 @@ /** * enum mlxreg_wdt_type - type of HW watchdog * - * TYPE1 HW watchdog implementation exist in old systems. - * All new systems have TYPE2 HW watchdog. - * TYPE3 HW watchdog can exist on all systems with new CPLD. - * TYPE3 is selected by WD capability bit. + * @MLX_WDT_TYPE1: HW watchdog implementation in old systems. + * @MLX_WDT_TYPE2: All new systems have TYPE2 HW watchdog. + * @MLX_WDT_TYPE3: HW watchdog that can exist on all systems with new CPLD. + * TYPE3 is selected by WD capability bit. */ enum mlxreg_wdt_type { MLX_WDT_TYPE1, @@ -35,7 +35,7 @@ enum mlxreg_wdt_type { * @MLXREG_HOTPLUG_LC_SYNCED: entry for line card synchronization events, coming * after hardware-firmware synchronization handshake; * @MLXREG_HOTPLUG_LC_READY: entry for line card ready events, indicating line card - PHYs ready / unready state; + * PHYs ready / unready state; * @MLXREG_HOTPLUG_LC_ACTIVE: entry for line card active events, indicating firmware * availability / unavailability for the ports on line card; * @MLXREG_HOTPLUG_LC_THERMAL: entry for line card thermal shutdown events, positive @@ -123,8 +123,8 @@ struct mlxreg_hotplug_device { * @reg_pwr: attribute power register; * @reg_ena: attribute enable register; * @mode: access mode; - * @np - pointer to node platform associated with attribute; - * @hpdev - hotplug device data; + * @np: pointer to node platform associated with attribute; + * @hpdev: hotplug device data; * @notifier: pointer to event notifier block; * @health_cntr: dynamic device health indication counter; * @attached: true if device has been attached after good health indication; -- cgit v1.2.3