From 11c32d7b6274cb0f554943d65bd4a126c4a86dcd Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 May 2014 23:25:14 +0200 Subject: video: move Versatile CLCD helpers This moves the Versatile-specific helper code and panel database down into the drivers/video folder next to the CLCD driver itself, preserving the config symbol but also moving the header to platform data. This is necessary to rid the Integrator of this final inclusion dependency and get us one less user of the plat-versatile folder. Cc: Arnd Bergmann Cc: Jean-Christophe Plagniol-Villard Cc: linux-fbdev@vger.kernel.org Cc: Russell King Acked-by: Tomi Valkeinen Signed-off-by: Linus Walleij --- include/linux/platform_data/video-clcd-versatile.h | 9 +++++++++ 1 file changed, 9 insertions(+) create mode 100644 include/linux/platform_data/video-clcd-versatile.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h new file mode 100644 index 000000000000..6bb6a1d2019b --- /dev/null +++ b/include/linux/platform_data/video-clcd-versatile.h @@ -0,0 +1,9 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); + +#endif -- cgit v1.2.3 From 2cd3a2a54656f9c480b1c7272fc07635d575841b Mon Sep 17 00:00:00 2001 From: Andreas Fenkart Date: Thu, 29 May 2014 10:28:00 +0200 Subject: mmc: omap_hsmmc: Enable SDIO interrupt There have been various patches floating around for enabling the SDIO IRQ for hsmmc, but none of them ever got merged. Probably the reason for not merging the SDIO interrupt patches has been the lack of wake-up path for SDIO on some omaps that has also needed remuxing the SDIO DAT1 line to a GPIO making the patches complex. This patch adds the minimal SDIO IRQ support to hsmmc for omaps that do have the wake-up path. For those omaps, the DAT1 line need to have the wake-up enable bit set, and the wake-up interrupt is the same as for the MMC controller. This patch has been tested on am3730 es1.2 with mwifiex connected to MMC3 with mwifiex waking to Ethernet traffic from off-idle mode. Note that for omaps that do not have the SDIO wake-up path, this patch will not work for idle modes and further patches for remuxing DAT1 to GPIO are needed. Based on earlier patches [1][2] by David Vrabel , Steve Sakoman For now, only support SDIO interrupt if we are booted with a separate wake-irq configued via device tree. This is because omaps need the wake-irq for idle states, and some omaps need special quirks. And we don't want to add new legacy mux platform init code callbacks any longer as we are moving to DT based booting anyways. To use it, you need to specify the wake-irq using the interrupts-extended property. [1] http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux.git;a=commitdiff_plain;h=010810d22f6f49ac03da4ba384969432e0320453 [2] http://comments.gmane.org/gmane.linux.kernel.mmc/20446 Acked-by: Balaji T K Signed-off-by: Andreas Fenkart Signed-off-by: Tony Lindgren Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 1 + drivers/mmc/host/omap_hsmmc.c | 201 +++++++++++++++++++-- include/linux/platform_data/mmc-omap.h | 1 + 3 files changed, 191 insertions(+), 12 deletions(-) (limited to 'include/linux/platform_data') diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index ce8056116fb0..0233ba7951e5 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -12,6 +12,7 @@ Required properties: Should be "ti,omap3-hsmmc", for OMAP3 controllers Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0 Should be "ti,omap4-hsmmc", for OMAP4 controllers + Should be "ti,am33xx-hsmmc", for AM335x controllers - ti,hwmods: Must be "mmc", n is controller instance starting 1 Optional properties: diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 6b7b75585926..9446010a5dd9 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -36,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -106,6 +108,7 @@ #define TC_EN (1 << 1) #define BWR_EN (1 << 4) #define BRR_EN (1 << 5) +#define CIRQ_EN (1 << 8) #define ERR_EN (1 << 15) #define CTO_EN (1 << 16) #define CCRC_EN (1 << 17) @@ -140,7 +143,6 @@ #define VDD_3V0 3000000 /* 300000 uV */ #define VDD_165_195 (ffs(MMC_VDD_165_195) - 1) -#define AUTO_CMD23 (1 << 1) /* Auto CMD23 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -194,6 +196,7 @@ struct omap_hsmmc_host { u32 sysctl; u32 capa; int irq; + int wake_irq; int use_dma, dma_ch; struct dma_chan *tx_chan; struct dma_chan *rx_chan; @@ -206,6 +209,9 @@ struct omap_hsmmc_host { int req_in_progress; unsigned long clk_rate; unsigned int flags; +#define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ +#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ +#define HSMMC_WAKE_IRQ_ENABLED (1 << 2) struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; }; @@ -510,27 +516,40 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, struct mmc_command *cmd) { - unsigned int irq_mask; + u32 irq_mask = INT_EN_MASK; + unsigned long flags; if (host->use_dma) - irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN); - else - irq_mask = INT_EN_MASK; + irq_mask &= ~(BRR_EN | BWR_EN); /* Disable timeout for erases */ if (cmd->opcode == MMC_ERASE) irq_mask &= ~DTO_EN; + spin_lock_irqsave(&host->irq_lock, flags); OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + + /* latch pending CIRQ, but don't signal MMC core */ + if (host->flags & HSMMC_SDIO_IRQ_ENABLED) + irq_mask |= CIRQ_EN; OMAP_HSMMC_WRITE(host->base, IE, irq_mask); + spin_unlock_irqrestore(&host->irq_lock, flags); } static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) { - OMAP_HSMMC_WRITE(host->base, ISE, 0); - OMAP_HSMMC_WRITE(host->base, IE, 0); + u32 irq_mask = 0; + unsigned long flags; + + spin_lock_irqsave(&host->irq_lock, flags); + /* no transfer running but need to keep cirq if enabled */ + if (host->flags & HSMMC_SDIO_IRQ_ENABLED) + irq_mask |= CIRQ_EN; + OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + OMAP_HSMMC_WRITE(host->base, IE, irq_mask); OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + spin_unlock_irqrestore(&host->irq_lock, flags); } /* Calculate divisor for the given clock frequency */ @@ -681,7 +700,9 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) && time_before(jiffies, timeout)) ; - omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); /* Do not initialize card-specific things if the power is off */ if (host->power_mode == MMC_POWER_OFF) @@ -1118,8 +1139,12 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) int status; status = OMAP_HSMMC_READ(host->base, STAT); - while (status & INT_EN_MASK && host->req_in_progress) { - omap_hsmmc_do_irq(host, status); + while (status & (INT_EN_MASK | CIRQ_EN)) { + if (host->req_in_progress) + omap_hsmmc_do_irq(host, status); + + if (status & CIRQ_EN) + mmc_signal_sdio_irq(host->mmc); /* Flush posted write */ status = OMAP_HSMMC_READ(host->base, STAT); @@ -1128,6 +1153,22 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t omap_hsmmc_wake_irq(int irq, void *dev_id) +{ + struct omap_hsmmc_host *host = dev_id; + + /* cirq is level triggered, disable to avoid infinite loop */ + spin_lock(&host->irq_lock); + if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { + disable_irq_nosync(host->wake_irq); + host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; + } + spin_unlock(&host->irq_lock); + pm_request_resume(host->dev); /* no use counter */ + + return IRQ_HANDLED; +} + static void set_sd_bus_power(struct omap_hsmmc_host *host) { unsigned long i; @@ -1639,6 +1680,79 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card) mmc_slot(host).init_card(card); } +static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct omap_hsmmc_host *host = mmc_priv(mmc); + u32 irq_mask; + unsigned long flags; + + spin_lock_irqsave(&host->irq_lock, flags); + + irq_mask = OMAP_HSMMC_READ(host->base, ISE); + if (enable) { + host->flags |= HSMMC_SDIO_IRQ_ENABLED; + irq_mask |= CIRQ_EN; + } else { + host->flags &= ~HSMMC_SDIO_IRQ_ENABLED; + irq_mask &= ~CIRQ_EN; + } + OMAP_HSMMC_WRITE(host->base, IE, irq_mask); + + /* + * if enable, piggy back detection on current request + * but always disable immediately + */ + if (!host->req_in_progress || !enable) + OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + + /* flush posted write */ + OMAP_HSMMC_READ(host->base, IE); + + spin_unlock_irqrestore(&host->irq_lock, flags); +} + +static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) +{ + struct mmc_host *mmc = host->mmc; + int ret; + + /* + * For omaps with wake-up path, wakeirq will be irq from pinctrl and + * for other omaps, wakeirq will be from GPIO (dat line remuxed to + * gpio). wakeirq is needed to detect sdio irq in runtime suspend state + * with functional clock disabled. + */ + if (!host->dev->of_node || !host->wake_irq) + return -ENODEV; + + /* Prevent auto-enabling of IRQ */ + irq_set_status_flags(host->wake_irq, IRQ_NOAUTOEN); + ret = devm_request_irq(host->dev, host->wake_irq, omap_hsmmc_wake_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + mmc_hostname(mmc), host); + if (ret) { + dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n"); + goto err; + } + + /* + * Some omaps don't have wake-up path from deeper idle states + * and need to remux SDIO DAT1 to GPIO for wake-up from idle. + */ + if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) { + ret = -ENODEV; + devm_free_irq(host->dev, host->wake_irq, host); + goto err; + } + + return 0; + +err: + dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n"); + host->wake_irq = 0; + return ret; +} + static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) { u32 hctl, capa, value; @@ -1691,7 +1805,7 @@ static const struct mmc_host_ops omap_hsmmc_ops = { .get_cd = omap_hsmmc_get_cd, .get_ro = omap_hsmmc_get_ro, .init_card = omap_hsmmc_init_card, - /* NYET -- enable_sdio_irq */ + .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, }; #ifdef CONFIG_DEBUG_FS @@ -1761,6 +1875,10 @@ static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = { static const struct omap_mmc_of_data omap4_mmc_of_data = { .reg_offset = 0x100, }; +static const struct omap_mmc_of_data am33xx_mmc_of_data = { + .reg_offset = 0x100, + .controller_flags = OMAP_HSMMC_SWAKEUP_MISSING, +}; static const struct of_device_id omap_mmc_of_match[] = { { @@ -1777,6 +1895,10 @@ static const struct of_device_id omap_mmc_of_match[] = { .compatible = "ti,omap4-hsmmc", .data = &omap4_mmc_of_data, }, + { + .compatible = "ti,am33xx-hsmmc", + .data = &am33xx_mmc_of_data, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_mmc_of_match); @@ -1913,6 +2035,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); + if (pdev->dev.of_node) + host->wake_irq = irq_of_parse_and_map(pdev->dev.of_node, 1); + mmc->ops = &omap_hsmmc_ops; mmc->f_min = OMAP_MMC_MIN_CLOCK; @@ -2066,6 +2191,18 @@ static int omap_hsmmc_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "pins are not configured from the driver\n"); + /* + * For now, only support SDIO interrupt if we have a separate + * wake-up interrupt configured from device tree. This is because + * the wake-up interrupt is needed for idle state and some + * platforms need special quirks. And we don't want to add new + * legacy mux platform init code callbacks any longer as we + * are moving to DT based booting anyways. + */ + ret = omap_hsmmc_configure_wake_irq(host); + if (!ret) + mmc->caps |= MMC_CAP_SDIO_IRQ; + omap_hsmmc_protect_card(host); mmc_add_host(mmc); @@ -2170,11 +2307,18 @@ static int omap_hsmmc_suspend(struct device *dev) pm_runtime_get_sync(host->dev); if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) { - omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } + /* do not wake up due to sdio irq */ + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) + disable_irq(host->wake_irq); + if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2200,6 +2344,10 @@ static int omap_hsmmc_resume(struct device *dev) omap_hsmmc_protect_card(host); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) + enable_irq(host->wake_irq); + pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); return 0; @@ -2215,22 +2363,51 @@ static int omap_hsmmc_resume(struct device *dev) static int omap_hsmmc_runtime_suspend(struct device *dev) { struct omap_hsmmc_host *host; + unsigned long flags; host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_save(host); dev_dbg(dev, "disabled\n"); + spin_lock_irqsave(&host->irq_lock, flags); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { + /* disable sdio irq handling to prevent race */ + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + + WARN_ON(host->flags & HSMMC_WAKE_IRQ_ENABLED); + enable_irq(host->wake_irq); + host->flags |= HSMMC_WAKE_IRQ_ENABLED; + } + spin_unlock_irqrestore(&host->irq_lock, flags); return 0; } static int omap_hsmmc_runtime_resume(struct device *dev) { struct omap_hsmmc_host *host; + unsigned long flags; host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_restore(host); dev_dbg(dev, "enabled\n"); + spin_lock_irqsave(&host->irq_lock, flags); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { + /* sdio irq flag can't change while in runtime suspend */ + if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { + disable_irq_nosync(host->wake_irq); + host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; + } + + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN); + OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN); + } + spin_unlock_irqrestore(&host->irq_lock, flags); return 0; } diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 2bf1b30cb5dc..51e70cf25cbc 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -28,6 +28,7 @@ */ #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) #define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) +#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) struct mmc_card; -- cgit v1.2.3 From e1b243772d455f3b25b410a15a5677a9e74ffa37 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Tue, 20 May 2014 20:43:51 +0400 Subject: ARM: i.MX: Remove registration helper for i.MX1 USB UDC imx_udc driver was removed from the kernel of about 10 months ago. This patch removes a registration helper for this driver and orphaned driver header. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices/Kconfig | 3 -- arch/arm/mach-imx/devices/Makefile | 1 - arch/arm/mach-imx/devices/devices-common.h | 16 ------ arch/arm/mach-imx/devices/platform-imx_udc.c | 75 ---------------------------- include/linux/platform_data/usb-imx_udc.h | 23 --------- 5 files changed, 118 deletions(-) delete mode 100644 arch/arm/mach-imx/devices/platform-imx_udc.c delete mode 100644 include/linux/platform_data/usb-imx_udc.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 2d260a5a307c..dd7e0b45fb18 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -43,9 +43,6 @@ config IMX_HAVE_PLATFORM_IMX_SSI config IMX_HAVE_PLATFORM_IMX_UART bool -config IMX_HAVE_PLATFORM_IMX_UDC - bool - config IMX_HAVE_PLATFORM_IPU_CORE bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 1cbc14cd80d1..6bb144dd680e 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 61352a80bb59..69bafc884dfa 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -176,22 +176,6 @@ struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); -#include -struct imx_imx_udc_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq0; - resource_size_t irq1; - resource_size_t irq2; - resource_size_t irq3; - resource_size_t irq4; - resource_size_t irq5; - resource_size_t irq6; -}; -struct platform_device *__init imx_add_imx_udc( - const struct imx_imx_udc_data *data, - const struct imxusb_platform_data *pdata); - #include #include struct imx_ipu_core_data { diff --git a/arch/arm/mach-imx/devices/platform-imx_udc.c b/arch/arm/mach-imx/devices/platform-imx_udc.c deleted file mode 100644 index 5ced7e4e2c71..000000000000 --- a/arch/arm/mach-imx/devices/platform-imx_udc.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_imx_udc_data_entry_single(soc, _size) \ - { \ - .iobase = soc ## _USBD_BASE_ADDR, \ - .iosize = _size, \ - .irq0 = soc ## _INT_USBD0, \ - .irq1 = soc ## _INT_USBD1, \ - .irq2 = soc ## _INT_USBD2, \ - .irq3 = soc ## _INT_USBD3, \ - .irq4 = soc ## _INT_USBD4, \ - .irq5 = soc ## _INT_USBD5, \ - .irq6 = soc ## _INT_USBD6, \ - } - -#define imx_imx_udc_data_entry(soc, _size) \ - [_id] = imx_imx_udc_data_entry_single(soc, _size) - -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_udc_data imx1_imx_udc_data __initconst = - imx_imx_udc_data_entry_single(MX1, SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - -struct platform_device *__init imx_add_imx_udc( - const struct imx_imx_udc_data *data, - const struct imxusb_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq0, - .end = data->irq0, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq1, - .end = data->irq1, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq2, - .end = data->irq2, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq3, - .end = data->irq3, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq4, - .end = data->irq4, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq5, - .end = data->irq5, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq6, - .end = data->irq6, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imx_udc", 0, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h deleted file mode 100644 index be273371f34a..000000000000 --- a/include/linux/platform_data/usb-imx_udc.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2008 Darius Augulis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_MXC_USB -#define __ASM_ARCH_MXC_USB - -struct imxusb_platform_data { - int (*init)(struct device *); - void (*exit)(struct device *); -}; - -#endif /* __ASM_ARCH_MXC_USB */ -- cgit v1.2.3 From 641dfe8b73e81aa38cbbeab72a480462a4987963 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 19 May 2014 20:41:52 +0800 Subject: ARM: imx: move EHCI platform defines out of platform_data header The platform_data header usb-ehci-mxc.h has a lot of stuff used by only IMX platform code. They shouldn't be really in this header but a IMX platform local header. Create ehci.h and move these stuff into it. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/ehci-imx25.c | 1 + arch/arm/mach-imx/ehci-imx27.c | 1 + arch/arm/mach-imx/ehci-imx31.c | 1 + arch/arm/mach-imx/ehci-imx35.c | 1 + arch/arm/mach-imx/ehci-imx5.c | 1 + arch/arm/mach-imx/ehci.h | 50 +++++++++++++++++++++++++++++ arch/arm/mach-imx/mach-armadillo5x0.c | 1 + arch/arm/mach-imx/mach-cpuimx27.c | 1 + arch/arm/mach-imx/mach-cpuimx35.c | 1 + arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 1 + arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 1 + arch/arm/mach-imx/mach-mx25_3ds.c | 1 + arch/arm/mach-imx/mach-mx27_3ds.c | 1 + arch/arm/mach-imx/mach-mx31_3ds.c | 1 + arch/arm/mach-imx/mach-mx31lilly.c | 1 + arch/arm/mach-imx/mach-mx31lite.c | 1 + arch/arm/mach-imx/mach-mx31moboard.c | 1 + arch/arm/mach-imx/mach-mx35_3ds.c | 1 + arch/arm/mach-imx/mach-pca100.c | 1 + arch/arm/mach-imx/mach-pcm037.c | 1 + arch/arm/mach-imx/mach-pcm038.c | 1 + arch/arm/mach-imx/mach-pcm043.c | 1 + arch/arm/mach-imx/mach-vpr200.c | 1 + arch/arm/mach-imx/mx31moboard-devboard.c | 1 + arch/arm/mach-imx/mx31moboard-marxbot.c | 1 + arch/arm/mach-imx/mx31moboard-smartbot.c | 1 + include/linux/platform_data/usb-ehci-mxc.h | 46 -------------------------- 27 files changed, 75 insertions(+), 46 deletions(-) create mode 100644 arch/arm/mach-imx/ehci.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 134c190e3003..42a5a3d14c5f 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -17,6 +17,7 @@ #include #include +#include "ehci.h" #include "hardware.h" #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index 448d9115539d..c56974346c16 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -17,6 +17,7 @@ #include #include +#include "ehci.h" #include "hardware.h" #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index 05de4e1e39d7..bede21d9b981 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -17,6 +17,7 @@ #include #include +#include "ehci.h" #include "hardware.h" #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 554e7cccff53..f424a543755c 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -17,6 +17,7 @@ #include #include +#include "ehci.h" #include "hardware.h" #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index e49710b10c68..74bfdd970bfe 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -17,6 +17,7 @@ #include #include +#include "ehci.h" #include "hardware.h" #define MXC_OTG_OFFSET 0 diff --git a/arch/arm/mach-imx/ehci.h b/arch/arm/mach-imx/ehci.h new file mode 100644 index 000000000000..4f42ca380b26 --- /dev/null +++ b/arch/arm/mach-imx/ehci.h @@ -0,0 +1,50 @@ +#ifndef __MACH_IMX_EHCI_H +#define __MACH_IMX_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USBH2CTRL_OFFSET 0x14 + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + +/* USB_PHY_CTRL_FUNC2*/ +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 + +int mx51_initialize_usb_hw(int port, unsigned int flags); +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); + +#endif /* __MACH_IMX_EHCI_H */ diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 39406b7e3228..a7e9bd26a552 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -50,6 +50,7 @@ #include "common.h" #include "devices-imx31.h" #include "crmregs-imx3.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 75b7b6aa2720..e6d4b9929571 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -36,6 +36,7 @@ #include "common.h" #include "devices-imx27.h" +#include "ehci.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx27.h" diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 1ffa27169045..62a6e02f4763 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -39,6 +39,7 @@ #include "common.h" #include "devices-imx35.h" +#include "ehci.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx35.h" diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index e978dda1434c..b2ee6e009fe4 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -35,6 +35,7 @@ #include "common.h" #include "devices-imx25.h" +#include "ehci.h" #include "eukrea-baseboards.h" #include "hardware.h" #include "iomux-mx25.h" diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index b61bd8ed5568..ede2bdbb5dd5 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -43,6 +43,7 @@ #include "common.h" #include "devices-imx27.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx27.h" diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index ea1fa199c148..0d01e367b062 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -39,6 +39,7 @@ #include "common.h" #include "devices-imx25.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx25.h" #include "mx25.h" diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 435a5428a678..9ef4640f3660 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -40,6 +40,7 @@ #include "3ds_debugboard.h" #include "common.h" #include "devices-imx27.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx27.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4217871a9653..453f41a2c5a9 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -40,6 +40,7 @@ #include "3ds_debugboard.h" #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index eee042fa2768..e9549a3c0223 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -45,6 +45,7 @@ #include "board-mx31lilly.h" #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index fa15d0b6118d..57eac6f45fab 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -42,6 +42,7 @@ #include "board-mx31lite.h" #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 08730f238449..6bed57040973 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -47,6 +47,7 @@ #include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 4e8b184d773b..72cd77d21f63 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -50,6 +50,7 @@ #include "3ds_debugboard.h" #include "common.h" #include "devices-imx35.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx35.h" diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 12212378c672..2d1c50bd8bdf 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,6 +36,7 @@ #include "common.h" #include "devices-imx27.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx27.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 81b8affb9448..8eb1570f7851 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -45,6 +45,7 @@ #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "pcm037.h" diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 6c56fb5553c7..ee862ad6b6fc 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -36,6 +36,7 @@ #include "board-pcm038.h" #include "common.h" #include "devices-imx27.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx27.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index c62b5d261345..b623bcaca76c 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -35,6 +35,7 @@ #include "common.h" #include "devices-imx35.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx35.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 872b3c6ba408..97836e94451c 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -34,6 +34,7 @@ #include "common.h" #include "devices-imx35.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx35.h" diff --git a/arch/arm/mach-imx/mx31moboard-devboard.c b/arch/arm/mach-imx/mx31moboard-devboard.c index 52d5b1574721..1e4ea1640a2a 100644 --- a/arch/arm/mach-imx/mx31moboard-devboard.c +++ b/arch/arm/mach-imx/mx31moboard-devboard.c @@ -24,6 +24,7 @@ #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mx31moboard-marxbot.c b/arch/arm/mach-imx/mx31moboard-marxbot.c index a4f43e90f3c1..699d01a4fef8 100644 --- a/arch/arm/mach-imx/mx31moboard-marxbot.c +++ b/arch/arm/mach-imx/mx31moboard-marxbot.c @@ -28,6 +28,7 @@ #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/arch/arm/mach-imx/mx31moboard-smartbot.c b/arch/arm/mach-imx/mx31moboard-smartbot.c index 04ae45dbfaa7..4b3d66eb8d34 100644 --- a/arch/arm/mach-imx/mx31moboard-smartbot.c +++ b/arch/arm/mach-imx/mx31moboard-smartbot.c @@ -28,6 +28,7 @@ #include "board-mx31moboard.h" #include "common.h" #include "devices-imx31.h" +#include "ehci.h" #include "hardware.h" #include "iomux-mx3.h" #include "ulpi.h" diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h index 7eb9d1329671..157e71f79f99 100644 --- a/include/linux/platform_data/usb-ehci-mxc.h +++ b/include/linux/platform_data/usb-ehci-mxc.h @@ -1,46 +1,6 @@ #ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H #define __INCLUDE_ASM_ARCH_MXC_EHCI_H -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) -#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) -#define MXC_EHCI_TTL_ENABLED (1 << 8) - -#define MXC_EHCI_INTERNAL_PHY (1 << 9) -#define MXC_EHCI_IPPUE_DOWN (1 << 10) -#define MXC_EHCI_IPPUE_UP (1 << 11) -#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) -#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) - -#define MXC_USBCTRL_OFFSET 0 -#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 -#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc -#define MXC_USBH2CTRL_OFFSET 0x14 - -#define MX5_USBOTHER_REGS_OFFSET 0x800 - -/* USB_PHY_CTRL_FUNC2*/ -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 -#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 - struct mxc_usbh_platform_data { int (*init)(struct platform_device *pdev); int (*exit)(struct platform_device *pdev); @@ -49,11 +9,5 @@ struct mxc_usbh_platform_data { struct usb_phy *otg; }; -int mx51_initialize_usb_hw(int port, unsigned int flags); -int mx25_initialize_usb_hw(int port, unsigned int flags); -int mx31_initialize_usb_hw(int port, unsigned int flags); -int mx35_initialize_usb_hw(int port, unsigned int flags); -int mx27_initialize_usb_hw(int port, unsigned int flags); - #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ -- cgit v1.2.3 From 35e3bc535d0437ca5f32985a294703ce48c75d88 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sat, 5 Jul 2014 08:51:38 +0400 Subject: ARM: i.MX: Remove i.MX1 camera support i.MX1 camera driver has been removed by the commit 90b055898e. This patch removes remaining support files for this camera. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Makefile | 3 -- arch/arm/mach-imx/devices/Kconfig | 3 -- arch/arm/mach-imx/devices/Makefile | 1 - arch/arm/mach-imx/devices/devices-common.h | 10 ------ arch/arm/mach-imx/devices/platform-mx1-camera.c | 42 ------------------------- arch/arm/mach-imx/mx1-camera-fiq-ksym.c | 18 ----------- arch/arm/mach-imx/mx1-camera-fiq.S | 35 --------------------- include/linux/platform_data/camera-mx1.h | 35 --------------------- 8 files changed, 147 deletions(-) delete mode 100644 arch/arm/mach-imx/devices/platform-mx1-camera.c delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c delete mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S delete mode 100644 include/linux/platform_data/camera-mx1.h (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index a3d9712567c9..d1c1d38f3741 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -40,9 +40,6 @@ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -# Support for CMOS sensor interface -obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o - # i.MX1 based machines obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 119f699649a9..73a1dce6cac1 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -45,9 +45,6 @@ config IMX_HAVE_PLATFORM_IMX_UART config IMX_HAVE_PLATFORM_IPU_CORE bool -config IMX_HAVE_PLATFORM_MX1_CAMERA - bool - config IMX_HAVE_PLATFORM_MX2_CAMERA bool diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index 6bb144dd680e..8fdb12b4ca7e 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 69bafc884dfa..67f7fb13050d 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -192,16 +192,6 @@ struct platform_device *__init imx_add_mx3_sdc_fb( const struct imx_ipu_core_data *data, struct mx3fb_platform_data *pdata); -#include -struct imx_mx1_camera_data { - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init imx_add_mx1_camera( - const struct imx_mx1_camera_data *data, - const struct mx1_camera_pdata *pdata); - #include struct imx_mx2_camera_data { const char *devid; diff --git a/arch/arm/mach-imx/devices/platform-mx1-camera.c b/arch/arm/mach-imx/devices/platform-mx1-camera.c deleted file mode 100644 index 2c6788131080..000000000000 --- a/arch/arm/mach-imx/devices/platform-mx1-camera.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "../hardware.h" -#include "devices-common.h" - -#define imx_mx1_camera_data_entry_single(soc, _size) \ - { \ - .iobase = soc ## _CSI ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_CSI, \ - } - -#ifdef CONFIG_SOC_IMX1 -const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst = - imx_mx1_camera_data_entry_single(MX1, 10); -#endif /* ifdef CONFIG_SOC_IMX1 */ - -struct platform_device *__init imx_add_mx1_camera( - const struct imx_mx1_camera_data *data, - const struct mx1_camera_pdata *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - return imx_add_platform_device_dmamask("mx1-camera", 0, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c deleted file mode 100644 index fb38436ca67f..000000000000 --- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Exported ksyms of ARCH_MX1 - * - * Copyright (C) 2008, Darius Augulis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -#include - -/* IMX camera FIQ handler */ -EXPORT_SYMBOL(mx1_camera_sof_fiq_start); -EXPORT_SYMBOL(mx1_camera_sof_fiq_end); diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S deleted file mode 100644 index 9c69aa65bf17..000000000000 --- a/arch/arm/mach-imx/mx1-camera-fiq.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2008 Paulius Zaleckas - * - * Based on linux/arch/arm/lib/floppydma.S - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - .text - .global mx1_camera_sof_fiq_end - .global mx1_camera_sof_fiq_start -mx1_camera_sof_fiq_start: - @ enable dma - ldr r12, [r9] - orr r12, r12, #0x00000001 - str r12, [r9] - @ unmask DMA interrupt - ldr r12, [r8] - bic r12, r12, r13 - str r12, [r8] - @ disable SOF interrupt - ldr r12, [r10] - bic r12, r12, #0x00010000 - str r12, [r10] - @ clear SOF flag - mov r12, #0x00010000 - str r12, [r11] - @ return from FIQ - subs pc, lr, #4 -mx1_camera_sof_fiq_end: diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h deleted file mode 100644 index 4fd6c70314b4..000000000000 --- a/include/linux/platform_data/camera-mx1.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * mx1_camera.h - i.MX1/i.MXL camera driver header file - * - * Copyright (c) 2008, Paulius Zaleckas - * Copyright (C) 2009, Darius Augulis - * - * Based on PXA camera.h file: - * Copyright (C) 2003, Intel Corporation - * Copyright (C) 2008, Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CAMERA_H_ -#define __ASM_ARCH_CAMERA_H_ - -#define MX1_CAMERA_DATA_HIGH 1 -#define MX1_CAMERA_PCLK_RISING 2 -#define MX1_CAMERA_VSYNC_HIGH 4 - -extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; - -/** - * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data - * @mclk_10khz: master clock frequency in 10kHz units - * @flags: MX1 camera platform flags - */ -struct mx1_camera_pdata { - unsigned long mclk_10khz; - unsigned long flags; -}; - -#endif /* __ASM_ARCH_CAMERA_H_ */ -- cgit v1.2.3 From ec4c4d877becf1c224f45347f4fc0016765e00d0 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 15 Jul 2014 09:58:06 +0200 Subject: video: fix up versatile CLCD helper move commit 11c32d7b6274cb0f ("video: move Versatile CLCD helpers") moved files out of the plat-versatile directory but in the process got a few of the dependencies wrong: - If CONFIG_FB is not set, the file no longer gets built, resulting in a link error - If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a Kconfig warning for incorrect dependencies due to the symbol being 'select'ed from the platform Kconfig. - When the file is not built, we also get a link error for missing symbols. This patch should fix all three, by removing the 'select' statements, changing the Kconfig description of the symbol to be enabled in exactly the right configurations, and adding inline stub functions for the case when the framebuffer driver is disabled. Signed-off-by: Arnd Bergmann Reviewed-by: Linus Walleij --- arch/arm/Kconfig | 2 -- arch/arm/mach-vexpress/Kconfig | 1 - drivers/video/fbdev/Kconfig | 6 ++---- include/linux/platform_data/video-clcd-versatile.h | 18 ++++++++++++++++++ 4 files changed, 20 insertions(+), 7 deletions(-) (limited to 'include/linux/platform_data') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c32064de77d8..11f18a04c066 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -332,7 +332,6 @@ config ARCH_REALVIEW select ICST select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. @@ -347,7 +346,6 @@ config ARCH_VERSATILE select HAVE_MACH_CLKDEV select ICST select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK select VERSATILE_FPGA_IRQ help diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index d8b9330f896a..e9166dfc4756 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -13,7 +13,6 @@ menuconfig ARCH_VEXPRESS select ICST select NO_IOPORT_MAP select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select POWER_RESET select POWER_RESET_VEXPRESS select POWER_SUPPLY diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 92026d31bb48..bdf463072247 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -292,10 +292,8 @@ config FB_ARMCLCD # Helper logic selected only by the ARM Versatile platform family. config PLAT_VERSATILE_CLCD - depends on FB_ARMCLCD - depends on (PLAT_VERSATILE || ARCH_INTEGRATOR) - default y - bool + def_bool ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS + depends on FB_ARMCLCD && FB=y config FB_ACORN bool "Acorn VIDC support" diff --git a/include/linux/platform_data/video-clcd-versatile.h b/include/linux/platform_data/video-clcd-versatile.h index 6bb6a1d2019b..09ccf182af4d 100644 --- a/include/linux/platform_data/video-clcd-versatile.h +++ b/include/linux/platform_data/video-clcd-versatile.h @@ -1,9 +1,27 @@ #ifndef PLAT_CLCD_H #define PLAT_CLCD_H +#ifdef CONFIG_PLAT_VERSATILE_CLCD struct clcd_panel *versatile_clcd_get_panel(const char *); int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); void versatile_clcd_remove_dma(struct clcd_fb *); +#else +static inline struct clcd_panel *versatile_clcd_get_panel(const char *s) +{ + return NULL; +} +static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + return -ENODEV; +} +static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm) +{ + return -ENODEV; +} +static inline void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ +} +#endif #endif -- cgit v1.2.3 From f892afb07eeecf575179c4747952644a82a92a36 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Mon, 16 Jun 2014 11:31:05 +0800 Subject: dmaengine: imx-sdma: Add a new DMATYPE for Shared Peripheral ASRC Shared Peripheral ASRC, running on SPBA, needs to use shp sciprts for DMA transfer. So this patch just adds a new DMATYPE for it. Signed-off-by: Nicolin Chen Acked-by: Shawn Guo Signed-off-by: Vinod Koul --- Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + drivers/dma/imx-sdma.c | 5 +++++ include/linux/platform_data/dma-imx.h | 1 + 3 files changed, 7 insertions(+) (limited to 'include/linux/platform_data') diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index e577196a12c0..4659fd952301 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -47,6 +47,7 @@ The full ID of peripheral types can be found below. 20 ASRC 21 ESAI 22 SSI Dual FIFO (needs firmware ver >= 2) + 23 Shared ASRC The third cell specifies the transfer priority as below. diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 8269c200b53b..de584e605db5 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -750,6 +750,11 @@ static void sdma_get_pc(struct sdma_channel *sdmac, emi_2_per = sdma->script_addrs->asrc_2_mcu_addr; per_2_per = sdma->script_addrs->per_2_per_addr; break; + case IMX_DMATYPE_ASRC_SP: + per_2_emi = sdma->script_addrs->shp_2_mcu_addr; + emi_2_per = sdma->script_addrs->mcu_2_shp_addr; + per_2_per = sdma->script_addrs->per_2_per_addr; + break; case IMX_DMATYPE_MSHC: per_2_emi = sdma->script_addrs->mshc_2_mcu_addr; emi_2_per = sdma->script_addrs->mcu_2_mshc_addr; diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index bcbc6c3c14c0..7aa0e89d1bcc 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -40,6 +40,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_ASRC, /* ASRC */ IMX_DMATYPE_ESAI, /* ESAI */ IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ + IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ }; enum imx_dma_prio { -- cgit v1.2.3 From eb3fe7def66511120766c8fc05ee9631cce7fe6f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 8 Jul 2014 13:46:37 +0300 Subject: ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue In some cases it is desired to move a channel to a specific event queue. Such a use case is audio, where it is preferred that it is served with highest priority compared to other DMA clients. Signed-off-by: Peter Ujfalusi Acked-by: Sekhar Nori Signed-off-by: Vinod Koul --- arch/arm/common/edma.c | 28 ++++++++++++++++++++++++++++ include/linux/platform_data/edma.h | 2 ++ 2 files changed, 30 insertions(+) (limited to 'include/linux/platform_data') diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index f834aae7720f..88099175fc56 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1414,6 +1414,34 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +/* + * edma_assign_channel_eventq - move given channel to desired eventq + * Arguments: + * channel - channel number + * eventq_no - queue to move the channel + * + * Can be used to move a channel to a selected event queue. + */ +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) +{ + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel >= edma_cc[ctlr]->num_channels) + return; + + /* default to low priority queue */ + if (eventq_no == EVENTQ_DEFAULT) + eventq_no = edma_cc[ctlr]->default_queue; + if (eventq_no >= edma_cc[ctlr]->num_tc) + return; + + map_dmach_queue(ctlr, channel, eventq_no); +} +EXPORT_SYMBOL(edma_assign_channel_eventq); + static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, struct edma *edma_cc) { diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index eb8d5627d080..bdb2710e2aab 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -150,6 +150,8 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); + struct edma_rsv_info { const s16 (*rsv_chans)[2]; -- cgit v1.2.3 From 7132fe4f568721cbd5d9bce5a8a71556e9bc45b4 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Sun, 17 Aug 2014 09:24:26 -0700 Subject: Input: drv260x - add TI drv260x haptics driver Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy Signed-off-by: Dmitry Torokhov --- .../devicetree/bindings/input/ti,drv260x.txt | 51 ++ drivers/input/misc/Kconfig | 11 + drivers/input/misc/Makefile | 1 + drivers/input/misc/drv260x.c | 738 +++++++++++++++++++++ include/dt-bindings/input/ti-drv260x.h | 36 + include/linux/platform_data/drv260x-pdata.h | 28 + 6 files changed, 865 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt create mode 100644 drivers/input/misc/drv260x.c create mode 100644 include/dt-bindings/input/ti-drv260x.h create mode 100644 include/linux/platform_data/drv260x-pdata.h (limited to 'include/linux/platform_data') diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt new file mode 100644 index 000000000000..a9c8519eb9de --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -0,0 +1,51 @@ +Texas Instruments - drv260x Haptics driver family + +The drv260x family serial control bus communicates through I2C protocols + +Required properties: + - compatible - One of: + "ti,drv2604" - DRV2604 + "ti,drv2605" - DRV2605 + "ti,drv2605l" - DRV2605L + - reg - I2C slave address + - vbat-supply - Required supply regulator + - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) + DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration + sequence during init. And the device is configured for real + time playback mode (RTP mode). + DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) + - library-sel - These are ROM based waveforms pre-programmed into the IC. + This should be set to set the library to use at power up. + (defined in include/dt-bindings/input/ti-drv260x.h) + DRV260X_LIB_EMPTY - Do not use a pre-programmed library + DRV260X_ERM_LIB_A - Pre-programmed Library + DRV260X_ERM_LIB_B - Pre-programmed Library + DRV260X_ERM_LIB_C - Pre-programmed Library + DRV260X_ERM_LIB_D - Pre-programmed Library + DRV260X_ERM_LIB_E - Pre-programmed Library + DRV260X_ERM_LIB_F - Pre-programmed Library + DRV260X_LIB_LRA - Pre-programmed LRA Library + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device. + - vib-rated-mv - The rated voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. + - vib-overdrive-mv - The overdrive voltage of the actuator in millivolts. + If this is not set then the value will be defaulted to + 3.2 v. +Example: + +drv2605l: drv2605l@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = ; + library-sel = ; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2605 diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2ff4425a893b..41d0ae62ba05 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -676,4 +676,15 @@ config INPUT_SOC_BUTTON_ARRAY To compile this driver as a module, choose M here: the module will be called soc_button_array. +config INPUT_DRV260X_HAPTICS + tristate "TI DRV260X haptics support" + depends on INPUT && I2C && GPIOLIB + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y to enable support for the TI DRV260X haptics driver. + + To compile this driver as a module, choose M here: the + module will be called drv260x-haptics. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4955ad322a01..cd4bc2d3474f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o +obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c new file mode 100644 index 000000000000..e90e3b8189f7 --- /dev/null +++ b/drivers/input/misc/drv260x.c @@ -0,0 +1,738 @@ +/* + * DRV260X haptics driver family + * + * Author: Dan Murphy + * + * Copyright: (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRV260X_STATUS 0x0 +#define DRV260X_MODE 0x1 +#define DRV260X_RT_PB_IN 0x2 +#define DRV260X_LIB_SEL 0x3 +#define DRV260X_WV_SEQ_1 0x4 +#define DRV260X_WV_SEQ_2 0x5 +#define DRV260X_WV_SEQ_3 0x6 +#define DRV260X_WV_SEQ_4 0x7 +#define DRV260X_WV_SEQ_5 0x8 +#define DRV260X_WV_SEQ_6 0x9 +#define DRV260X_WV_SEQ_7 0xa +#define DRV260X_WV_SEQ_8 0xb +#define DRV260X_GO 0xc +#define DRV260X_OVERDRIVE_OFF 0xd +#define DRV260X_SUSTAIN_P_OFF 0xe +#define DRV260X_SUSTAIN_N_OFF 0xf +#define DRV260X_BRAKE_OFF 0x10 +#define DRV260X_A_TO_V_CTRL 0x11 +#define DRV260X_A_TO_V_MIN_INPUT 0x12 +#define DRV260X_A_TO_V_MAX_INPUT 0x13 +#define DRV260X_A_TO_V_MIN_OUT 0x14 +#define DRV260X_A_TO_V_MAX_OUT 0x15 +#define DRV260X_RATED_VOLT 0x16 +#define DRV260X_OD_CLAMP_VOLT 0x17 +#define DRV260X_CAL_COMP 0x18 +#define DRV260X_CAL_BACK_EMF 0x19 +#define DRV260X_FEEDBACK_CTRL 0x1a +#define DRV260X_CTRL1 0x1b +#define DRV260X_CTRL2 0x1c +#define DRV260X_CTRL3 0x1d +#define DRV260X_CTRL4 0x1e +#define DRV260X_CTRL5 0x1f +#define DRV260X_LRA_LOOP_PERIOD 0x20 +#define DRV260X_VBAT_MON 0x21 +#define DRV260X_LRA_RES_PERIOD 0x22 +#define DRV260X_MAX_REG 0x23 + +#define DRV260X_ALLOWED_R_BYTES 25 +#define DRV260X_ALLOWED_W_BYTES 2 +#define DRV260X_MAX_RW_RETRIES 5 +#define DRV260X_I2C_RETRY_DELAY 10 + +#define DRV260X_GO_BIT 0x01 + +/* Library Selection */ +#define DRV260X_LIB_SEL_MASK 0x07 +#define DRV260X_LIB_SEL_RAM 0x0 +#define DRV260X_LIB_SEL_OD 0x1 +#define DRV260X_LIB_SEL_40_60 0x2 +#define DRV260X_LIB_SEL_60_80 0x3 +#define DRV260X_LIB_SEL_100_140 0x4 +#define DRV260X_LIB_SEL_140_PLUS 0x5 + +#define DRV260X_LIB_SEL_HIZ_MASK 0x10 +#define DRV260X_LIB_SEL_HIZ_EN 0x01 +#define DRV260X_LIB_SEL_HIZ_DIS 0 + +/* Mode register */ +#define DRV260X_STANDBY (1 << 6) +#define DRV260X_STANDBY_MASK 0x40 +#define DRV260X_INTERNAL_TRIGGER 0x00 +#define DRV260X_EXT_TRIGGER_EDGE 0x01 +#define DRV260X_EXT_TRIGGER_LEVEL 0x02 +#define DRV260X_PWM_ANALOG_IN 0x03 +#define DRV260X_AUDIOHAPTIC 0x04 +#define DRV260X_RT_PLAYBACK 0x05 +#define DRV260X_DIAGNOSTICS 0x06 +#define DRV260X_AUTO_CAL 0x07 + +/* Audio to Haptics Control */ +#define DRV260X_AUDIO_HAPTICS_PEAK_10MS (0 << 2) +#define DRV260X_AUDIO_HAPTICS_PEAK_20MS (1 << 2) +#define DRV260X_AUDIO_HAPTICS_PEAK_30MS (2 << 2) +#define DRV260X_AUDIO_HAPTICS_PEAK_40MS (3 << 2) + +#define DRV260X_AUDIO_HAPTICS_FILTER_100HZ 0x00 +#define DRV260X_AUDIO_HAPTICS_FILTER_125HZ 0x01 +#define DRV260X_AUDIO_HAPTICS_FILTER_150HZ 0x02 +#define DRV260X_AUDIO_HAPTICS_FILTER_200HZ 0x03 + +/* Min/Max Input/Output Voltages */ +#define DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT 0x19 +#define DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT 0x64 +#define DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT 0x19 +#define DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT 0xFF + +/* Feedback register */ +#define DRV260X_FB_REG_ERM_MODE 0x7f +#define DRV260X_FB_REG_LRA_MODE (1 << 7) + +#define DRV260X_BRAKE_FACTOR_MASK 0x1f +#define DRV260X_BRAKE_FACTOR_2X (1 << 0) +#define DRV260X_BRAKE_FACTOR_3X (2 << 4) +#define DRV260X_BRAKE_FACTOR_4X (3 << 4) +#define DRV260X_BRAKE_FACTOR_6X (4 << 4) +#define DRV260X_BRAKE_FACTOR_8X (5 << 4) +#define DRV260X_BRAKE_FACTOR_16 (6 << 4) +#define DRV260X_BRAKE_FACTOR_DIS (7 << 4) + +#define DRV260X_LOOP_GAIN_LOW 0xf3 +#define DRV260X_LOOP_GAIN_MED (1 << 2) +#define DRV260X_LOOP_GAIN_HIGH (2 << 2) +#define DRV260X_LOOP_GAIN_VERY_HIGH (3 << 2) + +#define DRV260X_BEMF_GAIN_0 0xfc +#define DRV260X_BEMF_GAIN_1 (1 << 0) +#define DRV260X_BEMF_GAIN_2 (2 << 0) +#define DRV260X_BEMF_GAIN_3 (3 << 0) + +/* Control 1 register */ +#define DRV260X_AC_CPLE_EN (1 << 5) +#define DRV260X_STARTUP_BOOST (1 << 7) + +/* Control 2 register */ + +#define DRV260X_IDISS_TIME_45 0 +#define DRV260X_IDISS_TIME_75 (1 << 0) +#define DRV260X_IDISS_TIME_150 (1 << 1) +#define DRV260X_IDISS_TIME_225 0x03 + +#define DRV260X_BLANK_TIME_45 (0 << 2) +#define DRV260X_BLANK_TIME_75 (1 << 2) +#define DRV260X_BLANK_TIME_150 (2 << 2) +#define DRV260X_BLANK_TIME_225 (3 << 2) + +#define DRV260X_SAMP_TIME_150 (0 << 4) +#define DRV260X_SAMP_TIME_200 (1 << 4) +#define DRV260X_SAMP_TIME_250 (2 << 4) +#define DRV260X_SAMP_TIME_300 (3 << 4) + +#define DRV260X_BRAKE_STABILIZER (1 << 6) +#define DRV260X_UNIDIR_IN (0 << 7) +#define DRV260X_BIDIR_IN (1 << 7) + +/* Control 3 Register */ +#define DRV260X_LRA_OPEN_LOOP (1 << 0) +#define DRV260X_ANANLOG_IN (1 << 1) +#define DRV260X_LRA_DRV_MODE (1 << 2) +#define DRV260X_RTP_UNSIGNED_DATA (1 << 3) +#define DRV260X_SUPPLY_COMP_DIS (1 << 4) +#define DRV260X_ERM_OPEN_LOOP (1 << 5) +#define DRV260X_NG_THRESH_0 (0 << 6) +#define DRV260X_NG_THRESH_2 (1 << 6) +#define DRV260X_NG_THRESH_4 (2 << 6) +#define DRV260X_NG_THRESH_8 (3 << 6) + +/* Control 4 Register */ +#define DRV260X_AUTOCAL_TIME_150MS (0 << 4) +#define DRV260X_AUTOCAL_TIME_250MS (1 << 4) +#define DRV260X_AUTOCAL_TIME_500MS (2 << 4) +#define DRV260X_AUTOCAL_TIME_1000MS (3 << 4) + +/** + * struct drv260x_data - + * @input_dev - Pointer to the input device + * @client - Pointer to the I2C client + * @regmap - Register map of the device + * @work - Work item used to off load the enable/disable of the vibration + * @enable_gpio - Pointer to the gpio used for enable/disabling + * @regulator - Pointer to the regulator for the IC + * @magnitude - Magnitude of the vibration event + * @mode - The operating mode of the IC (LRA_NO_CAL, ERM or LRA) + * @library - The vibration library to be used + * @rated_voltage - The rated_voltage of the actuator + * @overdriver_voltage - The over drive voltage of the actuator +**/ +struct drv260x_data { + struct input_dev *input_dev; + struct i2c_client *client; + struct regmap *regmap; + struct work_struct work; + struct gpio_desc *enable_gpio; + struct regulator *regulator; + u32 magnitude; + u32 mode; + u32 library; + int rated_voltage; + int overdrive_voltage; +}; + +static struct reg_default drv260x_reg_defs[] = { + { DRV260X_STATUS, 0xe0 }, + { DRV260X_MODE, 0x40 }, + { DRV260X_RT_PB_IN, 0x00 }, + { DRV260X_LIB_SEL, 0x00 }, + { DRV260X_WV_SEQ_1, 0x01 }, + { DRV260X_WV_SEQ_2, 0x00 }, + { DRV260X_WV_SEQ_3, 0x00 }, + { DRV260X_WV_SEQ_4, 0x00 }, + { DRV260X_WV_SEQ_5, 0x00 }, + { DRV260X_WV_SEQ_6, 0x00 }, + { DRV260X_WV_SEQ_7, 0x00 }, + { DRV260X_WV_SEQ_8, 0x00 }, + { DRV260X_GO, 0x00 }, + { DRV260X_OVERDRIVE_OFF, 0x00 }, + { DRV260X_SUSTAIN_P_OFF, 0x00 }, + { DRV260X_SUSTAIN_N_OFF, 0x00 }, + { DRV260X_BRAKE_OFF, 0x00 }, + { DRV260X_A_TO_V_CTRL, 0x05 }, + { DRV260X_A_TO_V_MIN_INPUT, 0x19 }, + { DRV260X_A_TO_V_MAX_INPUT, 0xff }, + { DRV260X_A_TO_V_MIN_OUT, 0x19 }, + { DRV260X_A_TO_V_MAX_OUT, 0xff }, + { DRV260X_RATED_VOLT, 0x3e }, + { DRV260X_OD_CLAMP_VOLT, 0x8c }, + { DRV260X_CAL_COMP, 0x0c }, + { DRV260X_CAL_BACK_EMF, 0x6c }, + { DRV260X_FEEDBACK_CTRL, 0x36 }, + { DRV260X_CTRL1, 0x93 }, + { DRV260X_CTRL2, 0xfa }, + { DRV260X_CTRL3, 0xa0 }, + { DRV260X_CTRL4, 0x20 }, + { DRV260X_CTRL5, 0x80 }, + { DRV260X_LRA_LOOP_PERIOD, 0x33 }, + { DRV260X_VBAT_MON, 0x00 }, + { DRV260X_LRA_RES_PERIOD, 0x00 }, +}; + +#define DRV260X_DEF_RATED_VOLT 0x90 +#define DRV260X_DEF_OD_CLAMP_VOLT 0x90 + +/** + * Rated and Overdriver Voltages: + * Calculated using the formula r = v * 255 / 5.6 + * where r is what will be written to the register + * and v is the rated or overdriver voltage of the actuator + **/ +static int drv260x_calculate_voltage(unsigned int voltage) +{ + return (voltage * 255 / 5600); +} + +static void drv260x_worker(struct work_struct *work) +{ + struct drv260x_data *haptics = container_of(work, struct drv260x_data, work); + int error; + + gpiod_set_value(haptics->enable_gpio, 1); + /* Data sheet says to wait 250us before trying to communicate */ + udelay(250); + + error = regmap_write(haptics->regmap, + DRV260X_MODE, DRV260X_RT_PLAYBACK); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write set mode: %d\n", error); + } else { + error = regmap_write(haptics->regmap, + DRV260X_RT_PB_IN, haptics->magnitude); + if (error) + dev_err(&haptics->client->dev, + "Failed to set magnitude: %d\n", error); + } +} + +static int drv260x_haptics_play(struct input_dev *input, void *data, + struct ff_effect *effect) +{ + struct drv260x_data *haptics = input_get_drvdata(input); + + haptics->mode = DRV260X_LRA_NO_CAL_MODE; + + if (effect->u.rumble.strong_magnitude > 0) + haptics->magnitude = effect->u.rumble.strong_magnitude; + else if (effect->u.rumble.weak_magnitude > 0) + haptics->magnitude = effect->u.rumble.weak_magnitude; + else + haptics->magnitude = 0; + + schedule_work(&haptics->work); + + return 0; +} + +static void drv260x_close(struct input_dev *input) +{ + struct drv260x_data *haptics = input_get_drvdata(input); + int error; + + cancel_work_sync(&haptics->work); + + error = regmap_write(haptics->regmap, DRV260X_MODE, DRV260X_STANDBY); + if (error) + dev_err(&haptics->client->dev, + "Failed to enter standby mode: %d\n", error); + + gpiod_set_value(haptics->enable_gpio, 0); +} + +static const struct reg_default drv260x_lra_cal_regs[] = { + { DRV260X_MODE, DRV260X_AUTO_CAL }, + { DRV260X_CTRL3, DRV260X_NG_THRESH_2 }, + { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE | + DRV260X_BRAKE_FACTOR_4X | DRV260X_LOOP_GAIN_HIGH }, +}; + +static const struct reg_default drv260x_lra_init_regs[] = { + { DRV260X_MODE, DRV260X_RT_PLAYBACK }, + { DRV260X_A_TO_V_CTRL, DRV260X_AUDIO_HAPTICS_PEAK_20MS | + DRV260X_AUDIO_HAPTICS_FILTER_125HZ }, + { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT }, + { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT }, + { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT }, + { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT }, + { DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE | + DRV260X_BRAKE_FACTOR_2X | DRV260X_LOOP_GAIN_MED | + DRV260X_BEMF_GAIN_3 }, + { DRV260X_CTRL1, DRV260X_STARTUP_BOOST }, + { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 }, + { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ANANLOG_IN }, + { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS }, +}; + +static const struct reg_default drv260x_erm_cal_regs[] = { + { DRV260X_MODE, DRV260X_AUTO_CAL }, + { DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT }, + { DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT }, + { DRV260X_A_TO_V_MIN_OUT, DRV260X_AUDIO_HAPTICS_MIN_OUT_VOLT }, + { DRV260X_A_TO_V_MAX_OUT, DRV260X_AUDIO_HAPTICS_MAX_OUT_VOLT }, + { DRV260X_FEEDBACK_CTRL, DRV260X_BRAKE_FACTOR_3X | + DRV260X_LOOP_GAIN_MED | DRV260X_BEMF_GAIN_2 }, + { DRV260X_CTRL1, DRV260X_STARTUP_BOOST }, + { DRV260X_CTRL2, DRV260X_SAMP_TIME_250 | DRV260X_BLANK_TIME_75 | + DRV260X_IDISS_TIME_75 }, + { DRV260X_CTRL3, DRV260X_NG_THRESH_2 | DRV260X_ERM_OPEN_LOOP }, + { DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS }, +}; + +static int drv260x_init(struct drv260x_data *haptics) +{ + int error; + unsigned int cal_buf; + + error = regmap_write(haptics->regmap, + DRV260X_RATED_VOLT, haptics->rated_voltage); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write DRV260X_RATED_VOLT register: %d\n", + error); + return error; + } + + error = regmap_write(haptics->regmap, + DRV260X_OD_CLAMP_VOLT, haptics->overdrive_voltage); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write DRV260X_OD_CLAMP_VOLT register: %d\n", + error); + return error; + } + + switch (haptics->mode) { + case DRV260X_LRA_MODE: + error = regmap_register_patch(haptics->regmap, + drv260x_lra_cal_regs, + ARRAY_SIZE(drv260x_lra_cal_regs)); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write LRA calibration registers: %d\n", + error); + return error; + } + + break; + + case DRV260X_ERM_MODE: + error = regmap_register_patch(haptics->regmap, + drv260x_erm_cal_regs, + ARRAY_SIZE(drv260x_erm_cal_regs)); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write ERM calibration registers: %d\n", + error); + return error; + } + + error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL, + DRV260X_LIB_SEL_MASK, + haptics->library); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write DRV260X_LIB_SEL register: %d\n", + error); + return error; + } + + break; + + default: + error = regmap_register_patch(haptics->regmap, + drv260x_lra_init_regs, + ARRAY_SIZE(drv260x_lra_init_regs)); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write LRA init registers: %d\n", + error); + return error; + } + + error = regmap_update_bits(haptics->regmap, DRV260X_LIB_SEL, + DRV260X_LIB_SEL_MASK, + haptics->library); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write DRV260X_LIB_SEL register: %d\n", + error); + return error; + } + + /* No need to set GO bit here */ + return 0; + } + + error = regmap_write(haptics->regmap, DRV260X_GO, DRV260X_GO_BIT); + if (error) { + dev_err(&haptics->client->dev, + "Failed to write GO register: %d\n", + error); + return error; + } + + do { + error = regmap_read(haptics->regmap, DRV260X_GO, &cal_buf); + if (error) { + dev_err(&haptics->client->dev, + "Failed to read GO register: %d\n", + error); + return error; + } + } while (cal_buf == DRV260X_GO_BIT); + + return 0; +} + +static const struct regmap_config drv260x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = DRV260X_MAX_REG, + .reg_defaults = drv260x_reg_defs, + .num_reg_defaults = ARRAY_SIZE(drv260x_reg_defs), + .cache_type = REGCACHE_NONE, +}; + +#ifdef CONFIG_OF +static int drv260x_parse_dt(struct device *dev, + struct drv260x_data *haptics) +{ + struct device_node *np = dev->of_node; + unsigned int voltage; + int error; + + error = of_property_read_u32(np, "mode", &haptics->mode); + if (error) { + dev_err(dev, "%s: No entry for mode\n", __func__); + return error; + } + + error = of_property_read_u32(np, "library-sel", &haptics->library); + if (error) { + dev_err(dev, "%s: No entry for library selection\n", + __func__); + return error; + } + + error = of_property_read_u32(np, "vib-rated-mv", &voltage); + if (!error) + haptics->rated_voltage = drv260x_calculate_voltage(voltage); + + + error = of_property_read_u32(np, "vib-overdrive-mv", &voltage); + if (!error) + haptics->overdrive_voltage = drv260x_calculate_voltage(voltage); + + return 0; +} +#else +static inline int drv260x_parse_dt(struct device *dev, + struct drv260x_data *haptics) +{ + dev_err(dev, "no platform data defined\n"); + + return -EINVAL; +} +#endif + +static int drv260x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev); + struct drv260x_data *haptics; + int error; + + haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL); + if (!haptics) + return -ENOMEM; + + haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT; + haptics->rated_voltage = DRV260X_DEF_RATED_VOLT; + + if (pdata) { + haptics->mode = pdata->mode; + haptics->library = pdata->library_selection; + if (pdata->vib_overdrive_voltage) + haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage); + if (pdata->vib_rated_voltage) + haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage); + } else if (client->dev.of_node) { + error = drv260x_parse_dt(&client->dev, haptics); + if (error) + return error; + } else { + dev_err(&client->dev, "Platform data not set\n"); + return -ENODEV; + } + + + if (haptics->mode < DRV260X_LRA_MODE || + haptics->mode > DRV260X_ERM_MODE) { + dev_err(&client->dev, + "Vibrator mode is invalid: %i\n", + haptics->mode); + return -EINVAL; + } + + if (haptics->library < DRV260X_LIB_EMPTY || + haptics->library > DRV260X_ERM_LIB_F) { + dev_err(&client->dev, + "Library value is invalid: %i\n", haptics->library); + return -EINVAL; + } + + if (haptics->mode == DRV260X_LRA_MODE && + haptics->library != DRV260X_LIB_EMPTY && + haptics->library != DRV260X_LIB_LRA) { + dev_err(&client->dev, + "LRA Mode with ERM Library mismatch\n"); + return -EINVAL; + } + + haptics->regulator = devm_regulator_get(&client->dev, "vbat"); + if (IS_ERR(haptics->regulator)) { + error = PTR_ERR(haptics->regulator); + dev_err(&client->dev, + "unable to get regulator, error: %d\n", error); + return error; + } + + haptics->enable_gpio = devm_gpiod_get(&client->dev, "enable"); + if (IS_ERR(haptics->enable_gpio)) { + error = PTR_ERR(haptics->enable_gpio); + if (error != -ENOENT && error != -ENOSYS) + return error; + haptics->enable_gpio = NULL; + } else { + gpiod_direction_output(haptics->enable_gpio, 1); + } + + haptics->input_dev = devm_input_allocate_device(&client->dev); + if (!haptics->input_dev) { + dev_err(&client->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + haptics->input_dev->name = "drv260x:haptics"; + haptics->input_dev->dev.parent = client->dev.parent; + haptics->input_dev->close = drv260x_close; + input_set_drvdata(haptics->input_dev, haptics); + input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(haptics->input_dev, NULL, + drv260x_haptics_play); + if (error) { + dev_err(&client->dev, "input_ff_create() failed: %d\n", + error); + return error; + } + + INIT_WORK(&haptics->work, drv260x_worker); + + haptics->client = client; + i2c_set_clientdata(client, haptics); + + haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config); + if (IS_ERR(haptics->regmap)) { + error = PTR_ERR(haptics->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + error = drv260x_init(haptics); + if (error) { + dev_err(&client->dev, "Device init failed: %d\n", error); + return error; + } + + error = input_register_device(haptics->input_dev); + if (error) { + dev_err(&client->dev, "couldn't register input device: %d\n", + error); + return error; + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int drv260x_suspend(struct device *dev) +{ + struct drv260x_data *haptics = dev_get_drvdata(dev); + int ret = 0; + + mutex_lock(&haptics->input_dev->mutex); + + if (haptics->input_dev->users) { + ret = regmap_update_bits(haptics->regmap, + DRV260X_MODE, + DRV260X_STANDBY_MASK, + DRV260X_STANDBY); + if (ret) { + dev_err(dev, "Failed to set standby mode\n"); + goto out; + } + + gpiod_set_value(haptics->enable_gpio, 0); + + ret = regulator_disable(haptics->regulator); + if (ret) { + dev_err(dev, "Failed to disable regulator\n"); + regmap_update_bits(haptics->regmap, + DRV260X_MODE, + DRV260X_STANDBY_MASK, 0); + } + } +out: + mutex_unlock(&haptics->input_dev->mutex); + return ret; +} + +static int drv260x_resume(struct device *dev) +{ + struct drv260x_data *haptics = dev_get_drvdata(dev); + int ret = 0; + + mutex_lock(&haptics->input_dev->mutex); + + if (haptics->input_dev->users) { + ret = regulator_enable(haptics->regulator); + if (ret) { + dev_err(dev, "Failed to enable regulator\n"); + goto out; + } + + ret = regmap_update_bits(haptics->regmap, + DRV260X_MODE, + DRV260X_STANDBY_MASK, 0); + if (ret) { + dev_err(dev, "Failed to unset standby mode\n"); + regulator_disable(haptics->regulator); + goto out; + } + + gpiod_set_value(haptics->enable_gpio, 1); + } + +out: + mutex_unlock(&haptics->input_dev->mutex); + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(drv260x_pm_ops, drv260x_suspend, drv260x_resume); + +static const struct i2c_device_id drv260x_id[] = { + { "drv2605l", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, drv260x_id); + +#ifdef CONFIG_OF +static const struct of_device_id drv260x_of_match[] = { + { .compatible = "ti,drv2604", }, + { .compatible = "ti,drv2604l", }, + { .compatible = "ti,drv2605", }, + { .compatible = "ti,drv2605l", }, + { } +}; +MODULE_DEVICE_TABLE(of, drv260x_of_match); +#endif + +static struct i2c_driver drv260x_driver = { + .probe = drv260x_probe, + .driver = { + .name = "drv260x-haptics", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(drv260x_of_match), + .pm = &drv260x_pm_ops, + }, + .id_table = drv260x_id, +}; +module_i2c_driver(drv260x_driver); + +MODULE_ALIAS("platform:drv260x-haptics"); +MODULE_DESCRIPTION("TI DRV260x haptics driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dan Murphy "); diff --git a/include/dt-bindings/input/ti-drv260x.h b/include/dt-bindings/input/ti-drv260x.h new file mode 100644 index 000000000000..2626e6d9f707 --- /dev/null +++ b/include/dt-bindings/input/ti-drv260x.h @@ -0,0 +1,36 @@ +/* + * DRV260X haptics driver family + * + * Author: Dan Murphy + * + * Copyright: (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _DT_BINDINGS_TI_DRV260X_H +#define _DT_BINDINGS_TI_DRV260X_H + +/* Calibration Types */ +#define DRV260X_LRA_MODE 0x00 +#define DRV260X_LRA_NO_CAL_MODE 0x01 +#define DRV260X_ERM_MODE 0x02 + +/* Library Selection */ +#define DRV260X_LIB_EMPTY 0x00 +#define DRV260X_ERM_LIB_A 0x01 +#define DRV260X_ERM_LIB_B 0x02 +#define DRV260X_ERM_LIB_C 0x03 +#define DRV260X_ERM_LIB_D 0x04 +#define DRV260X_ERM_LIB_E 0x05 +#define DRV260X_LIB_LRA 0x06 +#define DRV260X_ERM_LIB_F 0x07 + +#endif diff --git a/include/linux/platform_data/drv260x-pdata.h b/include/linux/platform_data/drv260x-pdata.h new file mode 100644 index 000000000000..0a03b0944411 --- /dev/null +++ b/include/linux/platform_data/drv260x-pdata.h @@ -0,0 +1,28 @@ +/* + * Platform data for DRV260X haptics driver family + * + * Author: Dan Murphy + * + * Copyright: (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _LINUX_DRV260X_PDATA_H +#define _LINUX_DRV260X_PDATA_H + +struct drv260x_platform_data { + u32 library_selection; + u32 mode; + u32 vib_rated_voltage; + u32 vib_overdrive_voltage; +}; + +#endif -- cgit v1.2.3 From 7d5929c1f34304ca5a970cfde8044053e56aa8c9 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 25 Aug 2014 16:15:32 -0700 Subject: mtd: nand: omap: Revert to using software ECC by default For v3.12 and prior, 1-bit Hamming code ECC via software was the default choice. Commit c66d039197e4 in v3.13 changed the behaviour to use 1-bit Hamming code via Hardware using a different ECC layout i.e. (ROM code layout) than what is used by software ECC. This ECC layout change causes NAND filesystems created in v3.12 and prior to be unusable in v3.13 and later. So revert back to using software ECC by default if an ECC scheme is not explicitely specified. This defect can be observed on the following boards during legacy boot -omap3beagle -omap3touchbook -overo -am3517crane -devkit8000 -ldp -3430sdp Signed-off-by: Roger Quadros Tested-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 2 +- arch/arm/mach-omap2/gpmc-nand.c | 3 ++- drivers/mtd/nand/omap2.c | 14 +++++++++++--- include/linux/platform_data/mtd-nand-omap2.h | 13 +++++++++++-- 4 files changed, 25 insertions(+), 7 deletions(-) (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e87f2a83d6bf..2d245c2e641c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 8897ad7035fd..cb7764314f17 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -49,7 +49,8 @@ static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) return 0; /* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */ - if (ecc_opt == OMAP_ECC_HAM1_CODE_HW) + if (ecc_opt == OMAP_ECC_HAM1_CODE_HW || + ecc_opt == OMAP_ECC_HAM1_CODE_SW) return 1; else return 0; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index f0ed92e210a1..4dd617897eee 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1794,9 +1794,12 @@ static int omap_nand_probe(struct platform_device *pdev) } /* populate MTD interface based on ECC scheme */ - nand_chip->ecc.layout = &omap_oobinfo; ecclayout = &omap_oobinfo; switch (info->ecc_opt) { + case OMAP_ECC_HAM1_CODE_SW: + nand_chip->ecc.mode = NAND_ECC_SOFT; + break; + case OMAP_ECC_HAM1_CODE_HW: pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n"); nand_chip->ecc.mode = NAND_ECC_HW; @@ -1848,7 +1851,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -1923,7 +1926,7 @@ static int omap_nand_probe(struct platform_device *pdev) nand_chip->ecc.priv = nand_bch_init(mtd, nand_chip->ecc.size, nand_chip->ecc.bytes, - &nand_chip->ecc.layout); + &ecclayout); if (!nand_chip->ecc.priv) { pr_err("nand: error: unable to use s/w BCH library\n"); err = -EINVAL; @@ -2012,6 +2015,9 @@ static int omap_nand_probe(struct platform_device *pdev) goto return_error; } + if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) + goto scan_tail; + /* all OOB bytes from oobfree->offset till end off OOB are free */ ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset; /* check if NAND device's OOB is enough to store ECC signatures */ @@ -2021,7 +2027,9 @@ static int omap_nand_probe(struct platform_device *pdev) err = -EINVAL; goto return_error; } + nand_chip->ecc.layout = ecclayout; +scan_tail: /* second phase scan */ if (nand_scan_tail(mtd)) { err = -ENXIO; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 660c029d694f..16ec262dfcc8 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -21,8 +21,17 @@ enum nand_io { }; enum omap_ecc { - /* 1-bit ECC calculation by GPMC, Error detection by Software */ - OMAP_ECC_HAM1_CODE_HW = 0, + /* + * 1-bit ECC: calculation and correction by SW + * ECC stored at end of spare area + */ + OMAP_ECC_HAM1_CODE_SW = 0, + + /* + * 1-bit ECC: calculation by GPMC, Error detection by Software + * ECC layout compatible with ROM code layout + */ + OMAP_ECC_HAM1_CODE_HW, /* 4-bit ECC calculation by GPMC, Error detection by Software */ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, /* 4-bit ECC calculation by GPMC, Error detection by ELM */ -- cgit v1.2.3 From d37aba521379203b740a2929e6e6f6bd2485f5d7 Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Thu, 28 Aug 2014 13:54:18 +0200 Subject: ARM: tegra: remove unused tegra_emc.h The header file include/linux/platform_data/tegra_emc.h does not seem to be used anywhere. It was orphaned by a7cbe92c "ARM: tegra: remove tegra EMC scaling driver". Remove it. Signed-off-by: Rasmus Villemoes Signed-off-by: Stephen Warren --- include/linux/platform_data/tegra_emc.h | 34 --------------------------------- 1 file changed, 34 deletions(-) delete mode 100644 include/linux/platform_data/tegra_emc.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h deleted file mode 100644 index df67505e98f8..000000000000 --- a/include/linux/platform_data/tegra_emc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2011 Google, Inc. - * - * Author: - * Colin Cross - * Olof Johansson - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __TEGRA_EMC_H_ -#define __TEGRA_EMC_H_ - -#define TEGRA_EMC_NUM_REGS 46 - -struct tegra_emc_table { - unsigned long rate; - u32 regs[TEGRA_EMC_NUM_REGS]; -}; - -struct tegra_emc_pdata { - int num_tables; - struct tegra_emc_table *tables; -}; - -#endif -- cgit v1.2.3 From ea2fdf842365066c82ab941086c6a1741ced4f2a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 28 Aug 2014 13:58:53 +0200 Subject: usb: phy: samsung: remove old common USB PHY code drivers/usb/phy/phy-samsung-usb[2,3] drivers got replaced by drivers/phy/phy-samsung-usb[2,3] ones and the old common Samsung USB PHY code is no longer used. Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Reviewed-by: Vivek Gautam Reviewed-by: Jingoo Han Acked-by: Kishon Vijay Abraham I Cc: Kamil Debski Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-samsung-usb.c | 241 -------------------- drivers/usb/phy/phy-samsung-usb.h | 317 --------------------------- include/linux/platform_data/samsung-usbphy.h | 27 --- 3 files changed, 585 deletions(-) delete mode 100644 drivers/usb/phy/phy-samsung-usb.c delete mode 100644 drivers/usb/phy/phy-samsung-usb.h delete mode 100644 include/linux/platform_data/samsung-usbphy.h (limited to 'include/linux/platform_data') diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c deleted file mode 100644 index ac025ca08425..000000000000 --- a/drivers/usb/phy/phy-samsung-usb.c +++ /dev/null @@ -1,241 +0,0 @@ -/* linux/drivers/usb/phy/phy-samsung-usb.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Praveen Paneri - * - * Samsung USB-PHY helper driver with common function calls; - * interacts with Samsung USB 2.0 PHY controller driver and later - * with Samsung USB 3.0 PHY driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "phy-samsung-usb.h" - -int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) -{ - struct device_node *usbphy_sys; - - /* Getting node for system controller interface for usb-phy */ - usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); - if (!usbphy_sys) { - dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); - return -ENODEV; - } - - sphy->pmuregs = of_iomap(usbphy_sys, 0); - - if (sphy->pmuregs == NULL) { - dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); - goto err0; - } - - sphy->sysreg = of_iomap(usbphy_sys, 1); - - /* - * Not returning error code here, since this situation is not fatal. - * Few SoCs may not have this switch available - */ - if (sphy->sysreg == NULL) - dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); - - of_node_put(usbphy_sys); - - return 0; - -err0: - of_node_put(usbphy_sys); - return -ENXIO; -} -EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt); - -/* - * Set isolation here for phy. - * Here 'on = true' would mean USB PHY block is isolated, hence - * de-activated and vice-versa. - */ -void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on) -{ - void __iomem *reg = NULL; - u32 reg_val; - u32 en_mask = 0; - - if (!sphy->pmuregs) { - dev_warn(sphy->dev, "Can't set pmu isolation\n"); - return; - } - - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { - reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset; - en_mask = sphy->drv_data->devphy_en_mask; - } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { - reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset; - en_mask = sphy->drv_data->hostphy_en_mask; - } - - reg_val = readl(reg); - - if (on) - reg_val &= ~en_mask; - else - reg_val |= en_mask; - - writel(reg_val, reg); - - if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) { - writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0); - writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1); - } -} -EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210); - -/* - * Configure the mode of working of usb-phy here: HOST/DEVICE. - */ -void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) -{ - u32 reg; - - if (!sphy->sysreg) { - dev_warn(sphy->dev, "Can't configure specified phy mode\n"); - return; - } - - reg = readl(sphy->sysreg); - - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) - reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; - else if (sphy->phy_type == USB_PHY_TYPE_HOST) - reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; - - writel(reg, sphy->sysreg); -} -EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel); - -/* - * PHYs are different for USB Device and USB Host. - * This make sure that correct PHY type is selected before - * any operation on PHY. - */ -int samsung_usbphy_set_type(struct usb_phy *phy, - enum samsung_usb_phy_type phy_type) -{ - struct samsung_usbphy *sphy = phy_to_sphy(phy); - - sphy->phy_type = phy_type; - - return 0; -} -EXPORT_SYMBOL_GPL(samsung_usbphy_set_type); - -int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy, - unsigned long rate) -{ - unsigned int clksel; - - switch (rate) { - case 12 * MHZ: - clksel = PHYCLK_CLKSEL_12M; - break; - case 24 * MHZ: - clksel = PHYCLK_CLKSEL_24M; - break; - case 48 * MHZ: - clksel = PHYCLK_CLKSEL_48M; - break; - default: - dev_err(sphy->dev, - "Invalid reference clock frequency: %lu\n", rate); - return -EINVAL; - } - - return clksel; -} -EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx); - -int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy, - unsigned long rate) -{ - unsigned int clksel; - - switch (rate) { - case 9600 * KHZ: - clksel = FSEL_CLKSEL_9600K; - break; - case 10 * MHZ: - clksel = FSEL_CLKSEL_10M; - break; - case 12 * MHZ: - clksel = FSEL_CLKSEL_12M; - break; - case 19200 * KHZ: - clksel = FSEL_CLKSEL_19200K; - break; - case 20 * MHZ: - clksel = FSEL_CLKSEL_20M; - break; - case 24 * MHZ: - clksel = FSEL_CLKSEL_24M; - break; - case 50 * MHZ: - clksel = FSEL_CLKSEL_50M; - break; - default: - dev_err(sphy->dev, - "Invalid reference clock frequency: %lu\n", rate); - return -EINVAL; - } - - return clksel; -} -EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12); - -/* - * Returns reference clock frequency selection value - */ -int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) -{ - struct clk *ref_clk; - unsigned long rate; - int refclk_freq; - - /* - * In exynos5250 USB host and device PHY use - * external crystal clock XXTI - */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - ref_clk = clk_get(sphy->dev, "ext_xtal"); - else - ref_clk = clk_get(sphy->dev, "xusbxti"); - if (IS_ERR(ref_clk)) { - dev_err(sphy->dev, "Failed to get reference clock\n"); - return PTR_ERR(ref_clk); - } - - rate = clk_get_rate(ref_clk); - refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate); - - clk_put(ref_clk); - - return refclk_freq; -} -EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq); diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h deleted file mode 100644 index 4eef45555971..000000000000 --- a/drivers/usb/phy/phy-samsung-usb.h +++ /dev/null @@ -1,317 +0,0 @@ -/* linux/drivers/usb/phy/phy-samsung-usb.h - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and - * OHCI-EXYNOS controllers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include - -/* Register definitions */ - -#define SAMSUNG_PHYPWR (0x00) -#define PHYPWR_NORMAL_MASK (0x19 << 0) -#define PHYPWR_OTG_DISABLE (0x1 << 4) -#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) -#define PHYPWR_FORCE_SUSPEND (0x1 << 1) -/* For Exynos4 */ -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) -#define PHYPWR_SLEEP_PHY0 (0x1 << 5) - -#define SAMSUNG_PHYCLK (0x04) -#define PHYCLK_MODE_USB11 (0x1 << 6) -#define PHYCLK_EXT_OSC (0x1 << 5) -#define PHYCLK_COMMON_ON_N (0x1 << 4) -#define PHYCLK_ID_PULL (0x1 << 2) -#define PHYCLK_CLKSEL_MASK (0x3 << 0) -#define PHYCLK_CLKSEL_48M (0x0 << 0) -#define PHYCLK_CLKSEL_12M (0x2 << 0) -#define PHYCLK_CLKSEL_24M (0x3 << 0) - -#define SAMSUNG_RSTCON (0x08) -#define RSTCON_PHYLINK_SWRST (0x1 << 2) -#define RSTCON_HLINK_SWRST (0x1 << 1) -#define RSTCON_SWRST (0x1 << 0) - -/* EXYNOS4X12 */ -#define EXYNOS4X12_PHY_HSIC_CTRL0 (0x04) -#define EXYNOS4X12_PHY_HSIC_CTRL1 (0x08) -#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) -#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) -#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) -#define RSTCON_HOSTPHY_SWRST (0xf << 3) - -/* EXYNOS5 */ -#define EXYNOS5_PHY_HOST_CTRL0 (0x00) -#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) -#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) -#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) -#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) -#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) -#define HOST_CTRL0_FSEL_MASK (0x7 << 16) -#define HOST_CTRL0_FSEL(_x) ((_x) << 16) -#define FSEL_CLKSEL_50M (0x7) -#define FSEL_CLKSEL_24M (0x5) -#define FSEL_CLKSEL_20M (0x4) -#define FSEL_CLKSEL_19200K (0x3) -#define FSEL_CLKSEL_12M (0x2) -#define FSEL_CLKSEL_10M (0x1) -#define FSEL_CLKSEL_9600K (0x0) -#define HOST_CTRL0_TESTBURNIN (0x1 << 11) -#define HOST_CTRL0_RETENABLE (0x1 << 10) -#define HOST_CTRL0_COMMONON_N (0x1 << 9) -#define HOST_CTRL0_SIDDQ (0x1 << 6) -#define HOST_CTRL0_FORCESLEEP (0x1 << 5) -#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) -#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) -#define HOST_CTRL0_UTMISWRST (0x1 << 2) -#define HOST_CTRL0_LINKSWRST (0x1 << 1) -#define HOST_CTRL0_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_TUNE0 (0x04) - -#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) - -#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) - -#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) - -#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) -#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) -#define HSIC_CTRL_REFCLKSEL (0x2 << 23) -#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) -#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) -#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) -#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) -#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) -#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) -#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) -#define HSIC_CTRL_SIDDQ (0x1 << 6) -#define HSIC_CTRL_FORCESLEEP (0x1 << 5) -#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) -#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) -#define HSIC_CTRL_UTMISWRST (0x1 << 2) -#define HSIC_CTRL_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) -#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) -#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) -#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) -#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) - -#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) -#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) -#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) -#define HOST_OHCICTRL_CNTSEL (0x1 << 1) -#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) - -#define EXYNOS5_PHY_OTG_SYS (0x38) -#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) -#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) -#define OTG_SYS_PHY0_SWRST (0x1 << 12) -#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) -#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) -#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) -#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) -#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) -#define OTG_SYS_COMMON_ON (0x1 << 7) -#define OTG_SYS_FSEL_MASK (0x7 << 4) -#define OTG_SYS_FSEL(_x) ((_x) << 4) -#define OTG_SYS_FORCESLEEP (0x1 << 3) -#define OTG_SYS_OTGDISABLE (0x1 << 2) -#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) -#define OTG_SYS_FORCESUSPEND (0x1 << 0) - -#define EXYNOS5_PHY_OTG_TUNE (0x40) - -/* EXYNOS5: USB 3.0 DRD */ -#define EXYNOS5_DRD_LINKSYSTEM (0x04) -#define LINKSYSTEM_FLADJ_MASK (0x3f << 1) -#define LINKSYSTEM_FLADJ(_x) ((_x) << 1) -#define LINKSYSTEM_XHCI_VERSION_CONTROL (0x1 << 27) - -#define EXYNOS5_DRD_PHYUTMI (0x08) -#define PHYUTMI_OTGDISABLE (0x1 << 6) -#define PHYUTMI_FORCESUSPEND (0x1 << 1) -#define PHYUTMI_FORCESLEEP (0x1 << 0) - -#define EXYNOS5_DRD_PHYPIPE (0x0c) - -#define EXYNOS5_DRD_PHYCLKRST (0x10) -#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23) -#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23) -#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21) -#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21) -#define PHYCLKRST_SSC_EN (0x1 << 20) -#define PHYCLKRST_REF_SSP_EN (0x1 << 19) -#define PHYCLKRST_REF_CLKDIV2 (0x1 << 18) -#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x02 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11) -#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11) -#define PHYCLKRST_FSEL_MASK (0x3f << 5) -#define PHYCLKRST_FSEL(_x) ((_x) << 5) -#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5) -#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5) -#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5) -#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5) -#define PHYCLKRST_RETENABLEN (0x1 << 4) -#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2) -#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2) -#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2) -#define PHYCLKRST_PORTRESET (0x1 << 1) -#define PHYCLKRST_COMMONONN (0x1 << 0) - -#define EXYNOS5_DRD_PHYREG0 (0x14) - -#define EXYNOS5_DRD_PHYREG1 (0x18) - -#define EXYNOS5_DRD_PHYPARAM0 (0x1c) -#define PHYPARAM0_REF_USE_PAD (0x1 << 31) -#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26) -#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26) - -#define EXYNOS5_DRD_PHYPARAM1 (0x20) -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) - -#define EXYNOS5_DRD_PHYTERM (0x24) - -#define EXYNOS5_DRD_PHYTEST (0x28) -#define PHYTEST_POWERDOWN_SSP (0x1 << 3) -#define PHYTEST_POWERDOWN_HSP (0x1 << 2) - -#define EXYNOS5_DRD_PHYADP (0x2c) - -#define EXYNOS5_DRD_PHYBATCHG (0x30) -#define PHYBATCHG_UTMI_CLKSEL (0x1 << 2) - -#define EXYNOS5_DRD_PHYRESUME (0x34) - -#define EXYNOS5_DRD_LINKPORT (0x44) - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#ifndef KHZ -#define KHZ (1000) -#endif - -#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) -#define S3C64XX_USBPHY_ENABLE (0x1 << 16) -#define EXYNOS_USBPHY_ENABLE (0x1 << 0) -#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) - -enum samsung_cpu_type { - TYPE_S3C64XX, - TYPE_EXYNOS4210, - TYPE_EXYNOS4X12, - TYPE_EXYNOS5250, -}; - -struct samsung_usbphy; - -/* - * struct samsung_usbphy_drvdata - driver data for various SoC variants - * @cpu_type: machine identifier - * @devphy_en_mask: device phy enable mask for PHY CONTROL register - * @hostphy_en_mask: host phy enable mask for PHY CONTROL register - * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from - * mapped address of system controller. - * @hostphy_reg_offset: offset to HOST PHY CONTROL register from - * mapped address of system controller. - * - * Here we have a separate mask for device type phy. - * Having different masks for host and device type phy helps - * in setting independent masks in case of SoCs like S5PV210, - * in which PHY0 and PHY1 enable bits belong to same register - * placed at position 0 and 1 respectively. - * Although for newer SoCs like exynos these bits belong to - * different registers altogether placed at position 0. - */ -struct samsung_usbphy_drvdata { - int cpu_type; - int devphy_en_mask; - int hostphy_en_mask; - u32 devphy_reg_offset; - u32 hostphy_reg_offset; - int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long); - void (*set_isolation)(struct samsung_usbphy *, bool); - void (*phy_enable)(struct samsung_usbphy *); - void (*phy_disable)(struct samsung_usbphy *); -}; - -/* - * struct samsung_usbphy - transceiver driver state - * @phy: transceiver structure - * @plat: platform data - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @regs: usb phy controller registers memory base - * @pmuregs: USB device PHY_CONTROL register memory base - * @sysreg: USB2.0 PHY_CFG register memory base - * @ref_clk_freq: reference clock frequency selection - * @drv_data: driver data available for different SoCs - * @phy_type: Samsung SoCs specific phy types: #HOST - * #DEVICE - * @phy_usage: usage count for phy - * @lock: lock for phy operations - */ -struct samsung_usbphy { - struct usb_phy phy; - struct samsung_usbphy_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *regs; - void __iomem *pmuregs; - void __iomem *sysreg; - int ref_clk_freq; - const struct samsung_usbphy_drvdata *drv_data; - enum samsung_usb_phy_type phy_type; - atomic_t phy_usage; - spinlock_t lock; -}; - -#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) - -static const struct of_device_id samsung_usbphy_dt_match[]; - -static inline const struct samsung_usbphy_drvdata -*samsung_usbphy_get_driver_data(struct platform_device *pdev) -{ - if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_node(samsung_usbphy_dt_match, - pdev->dev.of_node); - return match->data; - } - - return (struct samsung_usbphy_drvdata *) - platform_get_device_id(pdev)->driver_data; -} - -extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy); -extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, - bool on); -extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy); -extern int samsung_usbphy_set_type(struct usb_phy *phy, - enum samsung_usb_phy_type phy_type); -extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy); -extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy, - unsigned long rate); -extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy, - unsigned long rate); diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h deleted file mode 100644 index 1bd24cba982b..000000000000 --- a/include/linux/platform_data/samsung-usbphy.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * http://www.samsung.com/ - * Author: Praveen Paneri - * - * Defines platform data for samsung usb phy driver. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __SAMSUNG_USBPHY_PLATFORM_H -#define __SAMSUNG_USBPHY_PLATFORM_H - -/** - * samsung_usbphy_data - Platform data for USB PHY driver. - * @pmu_isolation: Function to control usb phy isolation in PMU. - */ -struct samsung_usbphy_data { - void (*pmu_isolation)(int on); -}; - -extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd); - -#endif /* __SAMSUNG_USBPHY_PLATFORM_H */ -- cgit v1.2.3 From dec38b5ce6a9edb406c60c2670b26a1a4262fdb9 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 6 Sep 2014 01:11:12 +0100 Subject: regulator: isl9305: Add Intersil ISL9305/H driver The ISL9305 and ISL9305H are mini-PMICs offering two DCDC regulators and two LDO regulators. While there are some register differences between them these do not affect the current Linux driver as the relevant features are not yet supported. Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/isl9305.txt | 36 +++ drivers/regulator/Kconfig | 6 + drivers/regulator/Makefile | 1 + drivers/regulator/isl9305.c | 247 +++++++++++++++++++++ include/linux/platform_data/isl9305.h | 30 +++ 5 files changed, 320 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/isl9305.txt create mode 100644 drivers/regulator/isl9305.c create mode 100644 include/linux/platform_data/isl9305.h (limited to 'include/linux/platform_data') diff --git a/Documentation/devicetree/bindings/regulator/isl9305.txt b/Documentation/devicetree/bindings/regulator/isl9305.txt new file mode 100644 index 000000000000..a626fc1bbf0d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/isl9305.txt @@ -0,0 +1,36 @@ +Intersil ISL9305/ISL9305H voltage regulator + +Required properties: + +- compatible: "isl,isl9305" or "isl,isl9305h" +- reg: I2C slave address, usually 0x68. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name, with valid + values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node + is defined by the standard binding for regulators; see regulator.txt. +- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1. + VINDCD2-supply: A phandle to a regulator node supplying VINDCD2. + VINLDO1-supply: A phandle to a regulator node supplying VINLDO1. + VINLDO2-supply: A phandle to a regulator node supplying VINLDO2. + +Optional properties: +- Per-regulator optional properties are defined in regulator.txt + +Example + + pmic: isl9305@68 { + compatible = "isl,isl9305"; + reg = <0x68>; + + VINDCD1-supply = <&system_power>; + VINDCD2-supply = <&system_power>; + VINLDO1-supply = <&system_power>; + VINLDO2-supply = <&system_power>; + + regulators { + dcd1 { + regulator-name = "VDD_DSP"; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index e6b98ed4c12f..3c8b6f401e4f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -250,6 +250,12 @@ config REGULATOR_HI6421 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All of them come with support to either ECO (idle) or sleep mode. +config REGULATOR_ISL9305 + tristate "Intersil ISL9305 regulator" + depends on I2C + help + This driver supports ISL9305 voltage regulator chip. + config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 5513e2c141b1..e12fee8c943b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o +obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c new file mode 100644 index 000000000000..b0d12d186b68 --- /dev/null +++ b/drivers/regulator/isl9305.c @@ -0,0 +1,247 @@ +/* + * isl9305 - Intersil ISL9305 DCDC regulator + * + * Copyright 2014 Linaro Ltd + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Registers + */ +#define ISL9305_DCD1OUT 0x0 +#define ISL9305_DCD2OUT 0x1 +#define ISL9305_LDO1OUT 0x2 +#define ISL9305_LDO2OUT 0x3 +#define ISL9305_DCD_PARAMETER 0x4 +#define ISL9305_SYSTEM_PARAMETER 0x5 +#define ISL9305_DCD_SRCTL 0x6 + +#define ISL9305_MAX_REG ISL9305_DCD_SRCTL + +/* + * DCD_PARAMETER + */ +#define ISL9305_DCD_PHASE 0x40 +#define ISL9305_DCD2_ULTRA 0x20 +#define ISL9305_DCD1_ULTRA 0x10 +#define ISL9305_DCD2_BLD 0x08 +#define ISL9305_DCD1_BLD 0x04 +#define ISL9305_DCD2_MODE 0x02 +#define ISL9305_DCD1_MODE 0x01 + +/* + * SYSTEM_PARAMETER + */ +#define ISL9305_I2C_EN 0x40 +#define ISL9305_DCDPOR_MASK 0x30 +#define ISL9305_LDO2_EN 0x08 +#define ISL9305_LDO1_EN 0x04 +#define ISL9305_DCD2_EN 0x02 +#define ISL9305_DCD1_EN 0x01 + +/* + * DCD_SRCTL + */ +#define ISL9305_DCD2SR_MASK 0xc0 +#define ISL9305_DCD1SR_MASK 0x07 + +static const struct regulator_ops isl9305_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_desc isl9305_regulators[] = { + [ISL9305_DCD1] = { + .name = "DCD1", + .n_voltages = 0x70, + .min_uV = 825000, + .uV_step = 25000, + .vsel_reg = ISL9305_DCD1OUT, + .vsel_mask = 0x7f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_DCD1_EN, + .supply_name = "VINDCD1", + .ops = &isl9305_ops, + }, + [ISL9305_DCD2] = { + .name = "DCD2", + .n_voltages = 0x70, + .min_uV = 825000, + .uV_step = 25000, + .vsel_reg = ISL9305_DCD2OUT, + .vsel_mask = 0x7f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_DCD2_EN, + .supply_name = "VINDCD2", + .ops = &isl9305_ops, + }, + [ISL9305_LDO1] = { + .name = "LDO1", + .n_voltages = 0x37, + .min_uV = 900000, + .uV_step = 50000, + .vsel_reg = ISL9305_LDO1OUT, + .vsel_mask = 0x3f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_LDO1_EN, + .supply_name = "VINLDO1", + .ops = &isl9305_ops, + }, + [ISL9305_LDO2] = { + .name = "LDO2", + .n_voltages = 0x37, + .min_uV = 900000, + .uV_step = 50000, + .vsel_reg = ISL9305_LDO2OUT, + .vsel_mask = 0x3f, + .enable_reg = ISL9305_SYSTEM_PARAMETER, + .enable_mask = ISL9305_LDO2_EN, + .supply_name = "VINLDO2", + .ops = &isl9305_ops, + }, +}; + +#ifdef CONFIG_OF +static struct of_regulator_match isl9305_reg_matches[] = { + [ISL9305_DCD1] = { .name = "dcd1" }, + [ISL9305_DCD2] = { .name = "dcd2" }, + [ISL9305_LDO1] = { .name = "ldo1" }, + [ISL9305_LDO2] = { .name = "ldo2" }, +}; + +static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c) +{ + struct device_node *node = i2c->dev.of_node; + struct of_regulator_match *matches; + struct device_node *regs; + int count; + + regs = of_get_child_by_name(node, "regulators"); + if (!regs) + return NULL; + + matches = devm_kmemdup(&i2c->dev, isl9305_reg_matches, + sizeof(isl9305_reg_matches), GFP_KERNEL); + if (!matches) + return NULL; + + count = of_regulator_match(&i2c->dev, regs, matches, + ARRAY_SIZE(isl9305_reg_matches)); + of_node_put(regs); + if ((count < 0) || (count > ARRAY_SIZE(isl9305_reg_matches))) + return NULL; + + return matches; +} +#else +static struct of_regulator_match *isl9305_parse_dt(struct i2c_client *i2c) +{ + return NULL; +} +#endif + +static const struct regmap_config isl9305_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = ISL9305_MAX_REG, + .cache_type = REGCACHE_RBTREE, +}; + +static int isl9305_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct regulator_config config = { }; + struct isl9305_pdata *pdata = i2c->dev.platform_data; + struct of_regulator_match *of_matches; + struct regulator_dev *rdev; + struct regmap *regmap; + int i, ret; + + of_matches = isl9305_parse_dt(i2c); + + regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); + return ret; + } + + config.dev = &i2c->dev; + + for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) { + config.of_node = NULL; + config.init_data = NULL; + + if (of_matches) { + config.init_data = of_matches[i].init_data; + config.of_node = of_matches[i].of_node; + } + + if (!config.init_data && pdata) + config.init_data = pdata->init_data[i]; + + rdev = devm_regulator_register(&i2c->dev, + &isl9305_regulators[i], + &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(&i2c->dev, "Failed to register %s: %d\n", + isl9305_regulators[i].name, ret); + return ret; + } + } + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id isl9305_dt_ids[] = { + { .compatible = "isl,isl9305" }, + { .compatible = "isl,isl9305h" }, + {}, +}; +#endif + +static const struct i2c_device_id isl9305_i2c_id[] = { + { "isl9305", }, + { "isl9305h", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id); + +static struct i2c_driver isl9305_regulator_driver = { + .driver = { + .name = "isl9305", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(isl9305_dt_ids), + }, + .probe = isl9305_i2c_probe, + .id_table = isl9305_i2c_id, +}; + +module_i2c_driver(isl9305_regulator_driver); + +MODULE_AUTHOR("Mark Brown"); +MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/isl9305.h b/include/linux/platform_data/isl9305.h new file mode 100644 index 000000000000..1419133fa69e --- /dev/null +++ b/include/linux/platform_data/isl9305.h @@ -0,0 +1,30 @@ +/* + * isl9305 - Intersil ISL9305 DCDC regulator + * + * Copyright 2014 Linaro Ltd + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ISL9305_H +#define __ISL9305_H + +#define ISL9305_DCD1 0 +#define ISL9305_DCD2 1 +#define ISL9305_LDO1 2 +#define ISL9305_LDO2 3 + +#define ISL9305_MAX_REGULATOR ISL9305_LDO2 + +struct regulator_init_data; + +struct isl9305_pdata { + struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR]; +}; + +#endif -- cgit v1.2.3 From 3d598f47e804a77208c6bb0a454123018e2f2281 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 19 Aug 2014 20:29:12 +0300 Subject: dmaengine: dw: move dw_dmac.h to where it belongs to There is a common storage for platform data related structures and definitions inside kernel source tree. The patch moves file from include/linux to include/linux/platform_data and renames it acoordingly. The users are also updated. Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar [For the arch/avr32/.* and .*sound/atmel.*] Acked-by: Hans-Christian Egtvedt Signed-off-by: Vinod Koul --- MAINTAINERS | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 2 +- arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 2 +- drivers/dma/dw/internal.h | 2 +- drivers/dma/dw/regs.h | 6 +- include/linux/dw_dmac.h | 111 ------------------------ include/linux/platform_data/dma-dw.h | 111 ++++++++++++++++++++++++ include/sound/atmel-abdac.h | 2 +- include/sound/atmel-ac97c.h | 2 +- sound/atmel/abdac.c | 2 +- sound/atmel/ac97c.c | 2 +- 11 files changed, 122 insertions(+), 122 deletions(-) delete mode 100644 include/linux/dw_dmac.h create mode 100644 include/linux/platform_data/dma-dw.h (limited to 'include/linux/platform_data') diff --git a/MAINTAINERS b/MAINTAINERS index aefa94841ff3..a10072963889 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7875,7 +7875,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER M: Viresh Kumar M: Andy Shevchenko S: Maintained -F: include/linux/dw_dmac.h +F: include/linux/platform_data/dma-dw.h F: drivers/dma/dw/ SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index db85b5ec3351..2a1aa712c6e7 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -7,7 +7,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h index 4bba58561d5c..11d7f4b28dc8 100644 --- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h +++ b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h @@ -1,7 +1,7 @@ #ifndef __MACH_ATMEL_MCI_H #define __MACH_ATMEL_MCI_H -#include +#include /** * struct mci_dma_data - DMA data for MCI interface diff --git a/drivers/dma/dw/internal.h b/drivers/dma/dw/internal.h index 32667f9e0dda..43cc1dfad5c9 100644 --- a/drivers/dma/dw/internal.h +++ b/drivers/dma/dw/internal.h @@ -12,7 +12,7 @@ #define _DW_DMAC_INTERNAL_H #include -#include +#include #include "regs.h" diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index bb98d3e91e8b..af02439155e9 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -11,7 +11,7 @@ #include #include -#include +#include #define DW_DMA_MAX_NR_CHANNELS 8 #define DW_DMA_MAX_NR_REQUESTS 16 @@ -161,7 +161,7 @@ struct dw_dma_regs { #define DWC_CTLH_DONE 0x00001000 #define DWC_CTLH_BLOCK_TS_MASK 0x00000fff -/* Bitfields in CFG_LO. Platform-configurable bits are in */ +/* Bitfields in CFG_LO. Platform-configurable bits are in */ #define DWC_CFGL_CH_PRIOR_MASK (0x7 << 5) /* priority mask */ #define DWC_CFGL_CH_PRIOR(x) ((x) << 5) /* priority */ #define DWC_CFGL_CH_SUSP (1 << 8) /* pause xfer */ @@ -172,7 +172,7 @@ struct dw_dma_regs { #define DWC_CFGL_RELOAD_SAR (1 << 30) #define DWC_CFGL_RELOAD_DAR (1 << 31) -/* Bitfields in CFG_HI. Platform-configurable bits are in */ +/* Bitfields in CFG_HI. Platform-configurable bits are in */ #define DWC_CFGH_DS_UPD_EN (1 << 5) #define DWC_CFGH_SS_UPD_EN (1 << 6) diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h deleted file mode 100644 index 68b4024184de..000000000000 --- a/include/linux/dw_dmac.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Driver for the Synopsys DesignWare DMA Controller - * - * Copyright (C) 2007 Atmel Corporation - * Copyright (C) 2010-2011 ST Microelectronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef DW_DMAC_H -#define DW_DMAC_H - -#include - -/** - * struct dw_dma_slave - Controller-specific information about a slave - * - * @dma_dev: required DMA master device. Depricated. - * @bus_id: name of this device channel, not just a device name since - * devices may have more than one channel e.g. "foo_tx" - * @cfg_hi: Platform-specific initializer for the CFG_HI register - * @cfg_lo: Platform-specific initializer for the CFG_LO register - * @src_master: src master for transfers on allocated channel. - * @dst_master: dest master for transfers on allocated channel. - */ -struct dw_dma_slave { - struct device *dma_dev; - u32 cfg_hi; - u32 cfg_lo; - u8 src_master; - u8 dst_master; -}; - -/** - * struct dw_dma_platform_data - Controller configuration parameters - * @nr_channels: Number of channels supported by hardware (max 8) - * @is_private: The device channels should be marked as private and not for - * by the general purpose DMA channel allocator. - * @chan_allocation_order: Allocate channels starting from 0 or 7 - * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. - * @block_size: Maximum block size supported by the controller - * @nr_masters: Number of AHB masters supported by the controller - * @data_width: Maximum data width supported by hardware per AHB master - * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) - */ -struct dw_dma_platform_data { - unsigned int nr_channels; - bool is_private; -#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ -#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ - unsigned char chan_allocation_order; -#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ -#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ - unsigned char chan_priority; - unsigned short block_size; - unsigned char nr_masters; - unsigned char data_width[4]; -}; - -/* bursts size */ -enum dw_dma_msize { - DW_DMA_MSIZE_1, - DW_DMA_MSIZE_4, - DW_DMA_MSIZE_8, - DW_DMA_MSIZE_16, - DW_DMA_MSIZE_32, - DW_DMA_MSIZE_64, - DW_DMA_MSIZE_128, - DW_DMA_MSIZE_256, -}; - -/* Platform-configurable bits in CFG_HI */ -#define DWC_CFGH_FCMODE (1 << 0) -#define DWC_CFGH_FIFO_MODE (1 << 1) -#define DWC_CFGH_PROTCTL(x) ((x) << 2) -#define DWC_CFGH_SRC_PER(x) ((x) << 7) -#define DWC_CFGH_DST_PER(x) ((x) << 11) - -/* Platform-configurable bits in CFG_LO */ -#define DWC_CFGL_LOCK_CH_XFER (0 << 12) /* scope of LOCK_CH */ -#define DWC_CFGL_LOCK_CH_BLOCK (1 << 12) -#define DWC_CFGL_LOCK_CH_XACT (2 << 12) -#define DWC_CFGL_LOCK_BUS_XFER (0 << 14) /* scope of LOCK_BUS */ -#define DWC_CFGL_LOCK_BUS_BLOCK (1 << 14) -#define DWC_CFGL_LOCK_BUS_XACT (2 << 14) -#define DWC_CFGL_LOCK_CH (1 << 15) /* channel lockout */ -#define DWC_CFGL_LOCK_BUS (1 << 16) /* busmaster lockout */ -#define DWC_CFGL_HS_DST_POL (1 << 18) /* dst handshake active low */ -#define DWC_CFGL_HS_SRC_POL (1 << 19) /* src handshake active low */ - -/* DMA API extensions */ -struct dw_cyclic_desc { - struct dw_desc **desc; - unsigned long periods; - void (*period_callback)(void *param); - void *period_callback_param; -}; - -struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, - dma_addr_t buf_addr, size_t buf_len, size_t period_len, - enum dma_transfer_direction direction); -void dw_dma_cyclic_free(struct dma_chan *chan); -int dw_dma_cyclic_start(struct dma_chan *chan); -void dw_dma_cyclic_stop(struct dma_chan *chan); - -dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan); - -dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan); - -#endif /* DW_DMAC_H */ diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h new file mode 100644 index 000000000000..68b4024184de --- /dev/null +++ b/include/linux/platform_data/dma-dw.h @@ -0,0 +1,111 @@ +/* + * Driver for the Synopsys DesignWare DMA Controller + * + * Copyright (C) 2007 Atmel Corporation + * Copyright (C) 2010-2011 ST Microelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef DW_DMAC_H +#define DW_DMAC_H + +#include + +/** + * struct dw_dma_slave - Controller-specific information about a slave + * + * @dma_dev: required DMA master device. Depricated. + * @bus_id: name of this device channel, not just a device name since + * devices may have more than one channel e.g. "foo_tx" + * @cfg_hi: Platform-specific initializer for the CFG_HI register + * @cfg_lo: Platform-specific initializer for the CFG_LO register + * @src_master: src master for transfers on allocated channel. + * @dst_master: dest master for transfers on allocated channel. + */ +struct dw_dma_slave { + struct device *dma_dev; + u32 cfg_hi; + u32 cfg_lo; + u8 src_master; + u8 dst_master; +}; + +/** + * struct dw_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @is_private: The device channels should be marked as private and not for + * by the general purpose DMA channel allocator. + * @chan_allocation_order: Allocate channels starting from 0 or 7 + * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. + * @block_size: Maximum block size supported by the controller + * @nr_masters: Number of AHB masters supported by the controller + * @data_width: Maximum data width supported by hardware per AHB master + * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) + */ +struct dw_dma_platform_data { + unsigned int nr_channels; + bool is_private; +#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ +#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ + unsigned char chan_allocation_order; +#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ +#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ + unsigned char chan_priority; + unsigned short block_size; + unsigned char nr_masters; + unsigned char data_width[4]; +}; + +/* bursts size */ +enum dw_dma_msize { + DW_DMA_MSIZE_1, + DW_DMA_MSIZE_4, + DW_DMA_MSIZE_8, + DW_DMA_MSIZE_16, + DW_DMA_MSIZE_32, + DW_DMA_MSIZE_64, + DW_DMA_MSIZE_128, + DW_DMA_MSIZE_256, +}; + +/* Platform-configurable bits in CFG_HI */ +#define DWC_CFGH_FCMODE (1 << 0) +#define DWC_CFGH_FIFO_MODE (1 << 1) +#define DWC_CFGH_PROTCTL(x) ((x) << 2) +#define DWC_CFGH_SRC_PER(x) ((x) << 7) +#define DWC_CFGH_DST_PER(x) ((x) << 11) + +/* Platform-configurable bits in CFG_LO */ +#define DWC_CFGL_LOCK_CH_XFER (0 << 12) /* scope of LOCK_CH */ +#define DWC_CFGL_LOCK_CH_BLOCK (1 << 12) +#define DWC_CFGL_LOCK_CH_XACT (2 << 12) +#define DWC_CFGL_LOCK_BUS_XFER (0 << 14) /* scope of LOCK_BUS */ +#define DWC_CFGL_LOCK_BUS_BLOCK (1 << 14) +#define DWC_CFGL_LOCK_BUS_XACT (2 << 14) +#define DWC_CFGL_LOCK_CH (1 << 15) /* channel lockout */ +#define DWC_CFGL_LOCK_BUS (1 << 16) /* busmaster lockout */ +#define DWC_CFGL_HS_DST_POL (1 << 18) /* dst handshake active low */ +#define DWC_CFGL_HS_SRC_POL (1 << 19) /* src handshake active low */ + +/* DMA API extensions */ +struct dw_cyclic_desc { + struct dw_desc **desc; + unsigned long periods; + void (*period_callback)(void *param); + void *period_callback_param; +}; + +struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, + dma_addr_t buf_addr, size_t buf_len, size_t period_len, + enum dma_transfer_direction direction); +void dw_dma_cyclic_free(struct dma_chan *chan); +int dw_dma_cyclic_start(struct dma_chan *chan); +void dw_dma_cyclic_stop(struct dma_chan *chan); + +dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan); + +dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan); + +#endif /* DW_DMAC_H */ diff --git a/include/sound/atmel-abdac.h b/include/sound/atmel-abdac.h index edff6a8ba1b5..a8f735d677fa 100644 --- a/include/sound/atmel-abdac.h +++ b/include/sound/atmel-abdac.h @@ -10,7 +10,7 @@ #ifndef __INCLUDE_SOUND_ATMEL_ABDAC_H #define __INCLUDE_SOUND_ATMEL_ABDAC_H -#include +#include /** * struct atmel_abdac_pdata - board specific ABDAC configuration diff --git a/include/sound/atmel-ac97c.h b/include/sound/atmel-ac97c.h index 00e6c289a936..f2a1cdc37661 100644 --- a/include/sound/atmel-ac97c.h +++ b/include/sound/atmel-ac97c.h @@ -10,7 +10,7 @@ #ifndef __INCLUDE_SOUND_ATMEL_AC97C_H #define __INCLUDE_SOUND_ATMEL_AC97C_H -#include +#include #define AC97C_CAPTURE 0x01 #define AC97C_PLAYBACK 0x02 diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c index edf2ca72d518..154a7c44e38d 100644 --- a/sound/atmel/abdac.c +++ b/sound/atmel/abdac.c @@ -9,7 +9,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index a04d23174dc2..1dfb35afef8f 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include -- cgit v1.2.3 From 7e1e2f27c5508518e58e5cbb11e26cbb815f4c56 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 19 Aug 2014 20:29:14 +0300 Subject: dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces Instead of exposing the possibility to set DMA registers CFG_HI and CFG_LO strict user to provide handshake interfaces explicitly. Signed-off-by: Andy Shevchenko Acked-by: Hans-Christian Egtvedt Signed-off-by: Vinod Koul --- arch/avr32/mach-at32ap/at32ap700x.c | 15 +++++---------- drivers/dma/dw/core.c | 4 ++-- include/linux/platform_data/dma-dw.h | 10 ++++------ 3 files changed, 11 insertions(+), 18 deletions(-) (limited to 'include/linux/platform_data') diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index ec7be287a97e..37b75602adf6 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1356,10 +1356,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) goto fail; slave->sdata.dma_dev = &dw_dmac0_device.dev; - slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0) - | DWC_CFGH_DST_PER(1)); - slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL - | DWC_CFGL_HS_SRC_POL); + slave->sdata.src_id = 0; + slave->sdata.dst_id = 1; slave->sdata.src_master = 1; slave->sdata.dst_master = 0; @@ -2054,8 +2052,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, /* Check if DMA slave interface for capture should be configured. */ if (flags & AC97C_CAPTURE) { rx_dws->dma_dev = &dw_dmac0_device.dev; - rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3); - rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + rx_dws->src_id = 3; rx_dws->src_master = 0; rx_dws->dst_master = 1; } @@ -2063,8 +2060,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, /* Check if DMA slave interface for playback should be configured. */ if (flags & AC97C_PLAYBACK) { tx_dws->dma_dev = &dw_dmac0_device.dev; - tx_dws->cfg_hi = DWC_CFGH_DST_PER(4); - tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + tx_dws->dst_id = 4; tx_dws->src_master = 0; tx_dws->dst_master = 1; } @@ -2136,8 +2132,7 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) dws = &data->dws; dws->dma_dev = &dw_dmac0_device.dev; - dws->cfg_hi = DWC_CFGH_DST_PER(2); - dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL); + dws->dst_id = 2; dws->src_master = 0; dws->dst_master = 1; diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 1af731b83b3f..0a9c052d437c 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -155,8 +155,8 @@ static void dwc_initialize(struct dw_dma_chan *dwc) */ BUG_ON(!dws->dma_dev || dws->dma_dev != dw->dma.dev); - cfghi = dws->cfg_hi; - cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK; + cfghi |= DWC_CFGH_DST_PER(dws->dst_id); + cfghi |= DWC_CFGH_SRC_PER(dws->src_id); } else { if (dwc->direction == DMA_MEM_TO_DEV) cfghi = DWC_CFGH_DST_PER(dwc->request_line); diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h index 68b4024184de..bc411a1bf8e7 100644 --- a/include/linux/platform_data/dma-dw.h +++ b/include/linux/platform_data/dma-dw.h @@ -17,17 +17,15 @@ * struct dw_dma_slave - Controller-specific information about a slave * * @dma_dev: required DMA master device. Depricated. - * @bus_id: name of this device channel, not just a device name since - * devices may have more than one channel e.g. "foo_tx" - * @cfg_hi: Platform-specific initializer for the CFG_HI register - * @cfg_lo: Platform-specific initializer for the CFG_LO register + * @src_id: src request line + * @dst_id: dst request line * @src_master: src master for transfers on allocated channel. * @dst_master: dest master for transfers on allocated channel. */ struct dw_dma_slave { struct device *dma_dev; - u32 cfg_hi; - u32 cfg_lo; + u8 src_id; + u8 dst_id; u8 src_master; u8 dst_master; }; -- cgit v1.2.3 From 1d46fea7d091f9dc2d4fd3fcb9f0117ca288f9a5 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 27 Aug 2014 00:42:56 +0200 Subject: drm/rcar-du: Use struct videomode in platform data In preparation for DT support where panel timings will be described by a DRM-agnostic video mode, replace the struct drm_mode_modeinfo instance in the panel platform data with a struct videomode. Signed-off-by: Laurent Pinchart --- arch/arm/mach-shmobile/board-koelsch-reference.c | 19 +++++++++---------- arch/arm/mach-shmobile/board-koelsch.c | 19 +++++++++---------- arch/arm/mach-shmobile/board-lager-reference.c | 19 +++++++++---------- arch/arm/mach-shmobile/board-lager.c | 19 +++++++++---------- arch/arm/mach-shmobile/board-marzen.c | 19 +++++++++---------- drivers/gpu/drm/rcar-du/Kconfig | 1 + drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c | 15 +++------------ include/linux/platform_data/rcar-du.h | 4 ++-- 8 files changed, 51 insertions(+), 64 deletions(-) (limited to 'include/linux/platform_data') diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index 3ff88c138896..364e69bf85d4 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -41,16 +41,15 @@ static struct rcar_du_encoder_data koelsch_du_encoders[] = { .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index b7d5bc7659cd..ad10ddb6a321 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -63,16 +63,15 @@ static struct rcar_du_encoder_data koelsch_du_encoders[] = { .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 41c808e56005..12a53a1c3d02 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -43,16 +43,15 @@ static struct rcar_du_encoder_data lager_du_encoders[] = { .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index e1d8215da0b0..80576c2ee668 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -99,16 +99,15 @@ static struct rcar_du_encoder_data lager_du_encoders[] = { .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index e5cf4201e769..ce33d7825c49 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -192,16 +192,15 @@ static struct rcar_du_encoder_data du_encoders[] = { .width_mm = 210, .height_mm = 158, .mode = { - .clock = 65000, - .hdisplay = 1024, - .hsync_start = 1048, - .hsync_end = 1184, - .htotal = 1344, - .vdisplay = 768, - .vsync_start = 771, - .vsync_end = 777, - .vtotal = 806, - .flags = 0, + .pixelclock = 65000000, + .hactive = 1024, + .hfront_porch = 20, + .hback_porch = 160, + .hsync_len = 136, + .vactive = 768, + .vfront_porch = 3, + .vback_porch = 29, + .vsync_len = 6, }, }, }, diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig index 2e3d7b5b0ad7..c96f6089f8bf 100644 --- a/drivers/gpu/drm/rcar-du/Kconfig +++ b/drivers/gpu/drm/rcar-du/Kconfig @@ -6,6 +6,7 @@ config DRM_RCAR_DU select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_KMS_FB_HELPER + select VIDEOMODE_HELPERS help Choose this option if you have an R-Car chipset. If M is selected the module will be called rcar-du-drm. diff --git a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c index cfcf6e74ad0a..d29544121658 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_lvdscon.c @@ -40,18 +40,9 @@ static int rcar_du_lvds_connector_get_modes(struct drm_connector *connector) return 0; mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; - mode->clock = lvdscon->panel->mode.clock; - mode->hdisplay = lvdscon->panel->mode.hdisplay; - mode->hsync_start = lvdscon->panel->mode.hsync_start; - mode->hsync_end = lvdscon->panel->mode.hsync_end; - mode->htotal = lvdscon->panel->mode.htotal; - mode->vdisplay = lvdscon->panel->mode.vdisplay; - mode->vsync_start = lvdscon->panel->mode.vsync_start; - mode->vsync_end = lvdscon->panel->mode.vsync_end; - mode->vtotal = lvdscon->panel->mode.vtotal; - mode->flags = lvdscon->panel->mode.flags; - - drm_mode_set_name(mode); + + drm_display_mode_from_videomode(&lvdscon->panel->mode, mode); + drm_mode_probed_add(connector, mode); return 1; diff --git a/include/linux/platform_data/rcar-du.h b/include/linux/platform_data/rcar-du.h index 1a2e9901a22e..a5f045e1d8fe 100644 --- a/include/linux/platform_data/rcar-du.h +++ b/include/linux/platform_data/rcar-du.h @@ -14,7 +14,7 @@ #ifndef __RCAR_DU_H__ #define __RCAR_DU_H__ -#include +#include