From 828fd3f1d611cff5accb9fbff75f6bb011d8c9e2 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 16 Dec 2024 09:32:17 +0100 Subject: Input: davinci-keyscan - remove leftover header The corresponding driver was removed two years ago but the platform data header was left behind. Remove it now. Fixes: 3c9cb34939fb ("input: remove davinci keyboard driver") Signed-off-by: Bartosz Golaszewski Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20241216083218.22926-1-brgl@bgdev.pl Signed-off-by: Dmitry Torokhov --- include/linux/platform_data/keyscan-davinci.h | 29 --------------------------- 1 file changed, 29 deletions(-) delete mode 100644 include/linux/platform_data/keyscan-davinci.h (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h deleted file mode 100644 index 260d596ba0af..000000000000 --- a/include/linux/platform_data/keyscan-davinci.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Texas Instruments, Inc - * - * Author: Miguel Aguilar - */ - -#ifndef DAVINCI_KEYSCAN_H -#define DAVINCI_KEYSCAN_H - -#include - -enum davinci_matrix_types { - DAVINCI_KEYSCAN_MATRIX_4X4, - DAVINCI_KEYSCAN_MATRIX_5X3, -}; - -struct davinci_ks_platform_data { - int (*device_enable)(struct device *dev); - unsigned short *keymap; - u32 keymapsize; - u8 rep:1; - u8 strobe; - u8 interval; - u8 matrix_type; -}; - -#endif - -- cgit v1.2.3 From 7c4b497fd4032935676b9024396f187fee005739 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 17 Dec 2024 18:41:54 +0100 Subject: clk: davinci: remove platform data struct There are no board files using struct davinci_pll_platform_data anymore. The structure itself is currently used to store a single pointer. Let's remove the struct definition, the header and rework the driver to not require the syscon regmap to be stored in probe(). Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20241217174154.84441-1-brgl@bgdev.pl Reviewed-by: David Lechner Signed-off-by: Stephen Boyd --- drivers/clk/davinci/pll.c | 32 +++------------------------ include/linux/platform_data/clk-davinci-pll.h | 21 ------------------ 2 files changed, 3 insertions(+), 50 deletions(-) delete mode 100644 include/linux/platform_data/clk-davinci-pll.h (limited to 'include/linux/platform_data') diff --git a/drivers/clk/davinci/pll.c b/drivers/clk/davinci/pll.c index 5bbbb3a66477..82727b1fc67a 100644 --- a/drivers/clk/davinci/pll.c +++ b/drivers/clk/davinci/pll.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -840,27 +839,6 @@ int of_davinci_pll_init(struct device *dev, struct device_node *node, return 0; } -static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev) -{ - struct davinci_pll_platform_data *pdata = dev_get_platdata(dev); - - /* - * Platform data is optional, so allocate a new struct if one was not - * provided. For device tree, this will always be the case. - */ - if (!pdata) - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return NULL; - - /* for device tree, we need to fill in the struct */ - if (dev->of_node) - pdata->cfgchip = - syscon_regmap_lookup_by_compatible("ti,da830-cfgchip"); - - return pdata; -} - /* needed in early boot for clocksource/clockevent */ #ifdef CONFIG_ARCH_DAVINCI_DA850 CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init); @@ -890,8 +868,8 @@ typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base, static int davinci_pll_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct davinci_pll_platform_data *pdata; davinci_pll_init pll_init = NULL; + struct regmap *cfgchip; void __iomem *base; pll_init = device_get_match_data(dev); @@ -903,17 +881,13 @@ static int davinci_pll_probe(struct platform_device *pdev) return -EINVAL; } - pdata = davinci_pll_get_pdata(dev); - if (!pdata) { - dev_err(dev, "missing platform data\n"); - return -EINVAL; - } + cfgchip = syscon_regmap_lookup_by_compatible("ti,da830-cfgchip"); base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(base)) return PTR_ERR(base); - return pll_init(dev, base, pdata->cfgchip); + return pll_init(dev, base, cfgchip); } static struct platform_driver davinci_pll_driver = { diff --git a/include/linux/platform_data/clk-davinci-pll.h b/include/linux/platform_data/clk-davinci-pll.h deleted file mode 100644 index e55dab1d578b..000000000000 --- a/include/linux/platform_data/clk-davinci-pll.h +++ /dev/null @@ -1,21 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * PLL clock driver for TI Davinci SoCs - * - * Copyright (C) 2018 David Lechner - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ -#define __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ - -#include - -/** - * davinci_pll_platform_data - * @cfgchip: CFGCHIP syscon regmap - */ -struct davinci_pll_platform_data { - struct regmap *cfgchip; -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_DAVINCI_PLL_H__ */ -- cgit v1.2.3 From 5ffa0dbfdc9fc05acae02d5b0dc766ec778569ac Mon Sep 17 00:00:00 2001 From: Dawid Niedzwiecki Date: Fri, 6 Dec 2024 09:15:13 +0000 Subject: platform/chrome: cros_ec: jump to RW before probing There are EC devices, like FPMCU, that use RWSIG as a method of authenticating RW section. After the authentication succeeds, EC device waits some time before jumping to RW. EC can be probed before the jump, which means there is a time window after jump to RW in which EC won't respond, because it is not initialized. It can cause a communication errors after probing. To avoid such problems, send the RWSIG continue command first, which skips waiting for the jump to RW. Send the command more times, to make sure EC is ready in RW before the start of the actual probing process. If a EC device doesn't support the RWSIG, it will respond with invalid command error code and probing will continue as usual. Signed-off-by: Dawid Niedzwiecki Link: https://lore.kernel.org/r/20241206091514.2538350-2-dawidn@google.com Signed-off-by: Tzung-Bi Shih --- drivers/platform/chrome/cros_ec.c | 5 +++ drivers/platform/chrome/cros_ec_i2c.c | 3 +- drivers/platform/chrome/cros_ec_ishtp.c | 2 +- drivers/platform/chrome/cros_ec_lpc.c | 2 +- drivers/platform/chrome/cros_ec_proto.c | 60 +++++++++++++++++++++++++++++ drivers/platform/chrome/cros_ec_rpmsg.c | 2 +- drivers/platform/chrome/cros_ec_spi.c | 2 +- drivers/platform/chrome/cros_ec_uart.c | 2 +- include/linux/platform_data/cros_ec_proto.h | 2 + 9 files changed, 74 insertions(+), 6 deletions(-) (limited to 'include/linux/platform_data') diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c index e821b3d39590..110771a8645e 100644 --- a/drivers/platform/chrome/cros_ec.c +++ b/drivers/platform/chrome/cros_ec.c @@ -204,6 +204,11 @@ int cros_ec_register(struct cros_ec_device *ec_dev) mutex_init(&ec_dev->lock); lockdep_set_class(&ec_dev->lock, &ec_dev->lockdep_key); + /* Send RWSIG continue to jump to RW for devices using RWSIG. */ + err = cros_ec_rwsig_continue(ec_dev); + if (err) + dev_info(dev, "Failed to continue RWSIG: %d\n", err); + err = cros_ec_query_all(ec_dev); if (err) { dev_err(dev, "Cannot identify the EC: error %d\n", err); diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c index 62662ba5bf6e..38af97cdaab2 100644 --- a/drivers/platform/chrome/cros_ec_i2c.c +++ b/drivers/platform/chrome/cros_ec_i2c.c @@ -305,7 +305,8 @@ static int cros_ec_i2c_probe(struct i2c_client *client) ec_dev->phys_name = client->adapter->name; ec_dev->din_size = sizeof(struct ec_host_response_i2c) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct ec_host_request_i2c); + ec_dev->dout_size = sizeof(struct ec_host_request_i2c) + + sizeof(struct ec_params_rwsig_action); err = cros_ec_register(ec_dev); if (err) { diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c index 5ac37bd024c8..7e7190b30cbb 100644 --- a/drivers/platform/chrome/cros_ec_ishtp.c +++ b/drivers/platform/chrome/cros_ec_ishtp.c @@ -557,7 +557,7 @@ static int cros_ec_dev_init(struct ishtp_cl_data *client_data) ec_dev->phys_name = dev_name(dev); ec_dev->din_size = sizeof(struct cros_ish_in_msg) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct cros_ish_out_msg); + ec_dev->dout_size = sizeof(struct cros_ish_out_msg) + sizeof(struct ec_params_rwsig_action); return cros_ec_register(ec_dev); } diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c index 8470b7f2b135..17c2578bbc58 100644 --- a/drivers/platform/chrome/cros_ec_lpc.c +++ b/drivers/platform/chrome/cros_ec_lpc.c @@ -573,7 +573,7 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) ec_dev->cmd_readmem = cros_ec_lpc_readmem; ec_dev->din_size = sizeof(struct ec_host_response) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct ec_host_request); + ec_dev->dout_size = sizeof(struct ec_host_request) + sizeof(struct ec_params_rwsig_action); ec_dev->priv = ec_lpc; /* diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c index 5c9a53dffcf9..ed3623b54bc3 100644 --- a/drivers/platform/chrome/cros_ec_proto.c +++ b/drivers/platform/chrome/cros_ec_proto.c @@ -15,6 +15,8 @@ #include "cros_ec_trace.h" #define EC_COMMAND_RETRIES 50 +#define RWSIG_CONTINUE_RETRIES 8 +#define RWSIG_CONTINUE_MAX_ERRORS_IN_ROW 3 static const int cros_ec_error_map[] = { [EC_RES_INVALID_COMMAND] = -EOPNOTSUPP, @@ -288,6 +290,64 @@ exit: return ret; } +int cros_ec_rwsig_continue(struct cros_ec_device *ec_dev) +{ + struct cros_ec_command *msg; + struct ec_params_rwsig_action *rwsig_action; + int ret = 0; + int error_count = 0; + + ec_dev->proto_version = 3; + + msg = kmalloc(sizeof(*msg) + sizeof(*rwsig_action), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->version = 0; + msg->command = EC_CMD_RWSIG_ACTION; + msg->insize = 0; + msg->outsize = sizeof(*rwsig_action); + + rwsig_action = (struct ec_params_rwsig_action *)msg->data; + rwsig_action->action = RWSIG_ACTION_CONTINUE; + + for (int i = 0; i < RWSIG_CONTINUE_RETRIES; i++) { + ret = cros_ec_send_command(ec_dev, msg); + + if (ret < 0) { + if (++error_count >= RWSIG_CONTINUE_MAX_ERRORS_IN_ROW) + break; + } else if (msg->result == EC_RES_INVALID_COMMAND) { + /* + * If EC_RES_INVALID_COMMAND is retured, it means RWSIG + * is not supported or EC is already in RW, so there is + * nothing left to do. + */ + break; + } else if (msg->result != EC_RES_SUCCESS) { + /* Unexpected command error. */ + ret = cros_ec_map_error(msg->result); + break; + } else { + /* + * The EC_CMD_RWSIG_ACTION succeed. Send the command + * more times, to make sure EC is in RW. A following + * command can timeout, because EC may need some time to + * initialize after jump to RW. + */ + error_count = 0; + } + + if (ret != -ETIMEDOUT) + usleep_range(90000, 100000); + } + + kfree(msg); + + return ret; +} +EXPORT_SYMBOL(cros_ec_rwsig_continue); + static int cros_ec_get_proto_info(struct cros_ec_device *ec_dev, int devidx) { struct cros_ec_command *msg; diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c index 39d3b50a7c09..bc2666491db1 100644 --- a/drivers/platform/chrome/cros_ec_rpmsg.c +++ b/drivers/platform/chrome/cros_ec_rpmsg.c @@ -231,7 +231,7 @@ static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev) ec_dev->phys_name = dev_name(&rpdev->dev); ec_dev->din_size = sizeof(struct ec_host_response) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct ec_host_request); + ec_dev->dout_size = sizeof(struct ec_host_request) + sizeof(struct ec_params_rwsig_action); dev_set_drvdata(dev, ec_dev); ec_rpmsg->rpdev = rpdev; diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c index 86a3d32a7763..946373238502 100644 --- a/drivers/platform/chrome/cros_ec_spi.c +++ b/drivers/platform/chrome/cros_ec_spi.c @@ -766,7 +766,7 @@ static int cros_ec_spi_probe(struct spi_device *spi) ec_dev->din_size = EC_MSG_PREAMBLE_COUNT + sizeof(struct ec_host_response) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct ec_host_request); + ec_dev->dout_size = sizeof(struct ec_host_request) + sizeof(struct ec_params_rwsig_action); ec_spi->last_transfer_ns = ktime_get_ns(); diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c index 62bc24f6dcc7..19c179d49c90 100644 --- a/drivers/platform/chrome/cros_ec_uart.c +++ b/drivers/platform/chrome/cros_ec_uart.c @@ -283,7 +283,7 @@ static int cros_ec_uart_probe(struct serdev_device *serdev) ec_dev->pkt_xfer = cros_ec_uart_pkt_xfer; ec_dev->din_size = sizeof(struct ec_host_response) + sizeof(struct ec_response_get_protocol_info); - ec_dev->dout_size = sizeof(struct ec_host_request); + ec_dev->dout_size = sizeof(struct ec_host_request) + sizeof(struct ec_params_rwsig_action); serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops); diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index b34ed0cc1f8d..701389c16fa7 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -246,6 +246,8 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); +int cros_ec_rwsig_continue(struct cros_ec_device *ec_dev); + int cros_ec_query_all(struct cros_ec_device *ec_dev); int cros_ec_get_next_event(struct cros_ec_device *ec_dev, -- cgit v1.2.3 From fb1e493426d4da77a1d192fffa4dc55fc4ad5741 Mon Sep 17 00:00:00 2001 From: Rob Barnes Date: Wed, 18 Dec 2024 01:57:59 +0000 Subject: platform/chrome: cros_ec_lpc: Only check for events on MKBP notifies Only check EC for MKBP events when the ACPI notify value indicates the notify is due to an MKBP host event. This reduces unnecessary queries to the EC. Notify value 0x80 is reserved for devices specific notifies. It is used by many devices to indicate various events. It's only used by cros_ec for MKBP events. Signed-off-by: Rob Barnes Link: https://lore.kernel.org/r/20241218015759.3558830-1-robbarnes@google.com Signed-off-by: Tzung-Bi Shih --- drivers/platform/chrome/cros_ec_lpc.c | 2 +- include/linux/platform_data/cros_ec_proto.h | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c index 17c2578bbc58..69801ace0496 100644 --- a/drivers/platform/chrome/cros_ec_lpc.c +++ b/drivers/platform/chrome/cros_ec_lpc.c @@ -419,7 +419,7 @@ static void cros_ec_lpc_acpi_notify(acpi_handle device, u32 value, void *data) return; } - if (ec_dev->mkbp_event_supported) + if (value == ACPI_NOTIFY_CROS_EC_MKBP && ec_dev->mkbp_event_supported) do { ret = cros_ec_get_next_event(ec_dev, NULL, &ec_has_more_events); diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index 701389c16fa7..3ec24f445c29 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -41,6 +41,11 @@ #define EC_MAX_REQUEST_OVERHEAD 1 #define EC_MAX_RESPONSE_OVERHEAD 32 +/* + * ACPI notify value for MKBP host event. + */ +#define ACPI_NOTIFY_CROS_EC_MKBP 0x80 + /* * EC panic is not covered by the standard (0-F) ACPI notify values. * Arbitrarily choosing B0 to notify ec panic, which is in the 84-BF -- cgit v1.2.3 From 401d07d530bfaf7131d6ab9acd32ff12b9a6ddf1 Mon Sep 17 00:00:00 2001 From: Pavan Holla Date: Tue, 31 Dec 2024 13:10:46 +0000 Subject: platform/chrome: Update ChromeOS EC header for UCSI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add EC host commands for reading and writing UCSI structures in the EC. The corresponding kernel driver is cros-ec-ucsi. Also update PD events supported by the EC. Acked-by: Tzung-Bi Shih Signed-off-by: Pavan Holla Signed-off-by: Łukasz Bartosik Link: https://lore.kernel.org/r/20241231131047.1757434-2-ukaszb@chromium.org Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/cros_ec_commands.h | 28 +++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'include/linux/platform_data') diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index b3c4993e656e..ecf290a0c98f 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -5044,8 +5044,11 @@ struct ec_response_pd_status { #define PD_EVENT_POWER_CHANGE BIT(1) #define PD_EVENT_IDENTITY_RECEIVED BIT(2) #define PD_EVENT_DATA_SWAP BIT(3) +#define PD_EVENT_TYPEC BIT(4) +#define PD_EVENT_PPM BIT(5) + struct ec_response_host_event_status { - uint32_t status; /* PD MCU host event status */ + uint32_t status; /* PD MCU host event status */ } __ec_align4; /* Set USB type-C port role and muxes */ @@ -6105,6 +6108,29 @@ struct ec_response_typec_vdm_response { #undef VDO_MAX_SIZE +/* + * UCSI OPM-PPM commands + * + * These commands are used for communication between OPM and PPM. + * Only UCSI3.0 is tested. + */ + +#define EC_CMD_UCSI_PPM_SET 0x0140 + +/* The data size is stored in the host command protocol header. */ +struct ec_params_ucsi_ppm_set { + uint16_t offset; + uint8_t data[]; +} __ec_align2; + +#define EC_CMD_UCSI_PPM_GET 0x0141 + +/* For 'GET' sub-commands, data will be returned as a raw payload. */ +struct ec_params_ucsi_ppm_get { + uint16_t offset; + uint8_t size; +} __ec_align2; + /*****************************************************************************/ /* The command range 0x200-0x2FF is reserved for Rotor. */ -- cgit v1.2.3 From b04ce63859793e3439b394976b8d29e785d4d69a Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 11 Dec 2024 11:23:35 +0100 Subject: i2c: davinci: kill platform data There are no more board file users of this driver. The platform data structure is only used internally. Two of the four fields it stores are not used at all anymore. Pull the remainder into the driver data struct and shrink code by removing parts that are now dead code. Signed-off-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20241211102337.37956-1-brgl@bgdev.pl Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-davinci.c | 84 +++++++------------------------ include/linux/platform_data/i2c-davinci.h | 26 ---------- 2 files changed, 19 insertions(+), 91 deletions(-) delete mode 100644 include/linux/platform_data/i2c-davinci.h (limited to 'include/linux/platform_data') diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 71dc0a6688b7..4b499931fdfd 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -26,7 +26,6 @@ #include #include #include -#include #include /* ----- global defines ----------------------------------------------- */ @@ -117,6 +116,8 @@ /* timeout for pm runtime autosuspend */ #define DAVINCI_I2C_PM_TIMEOUT 1000 /* ms */ +#define DAVINCI_I2C_DEFAULT_BUS_FREQ 100 + struct davinci_i2c_dev { struct device *dev; void __iomem *base; @@ -132,13 +133,10 @@ struct davinci_i2c_dev { #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif - struct davinci_i2c_platform_data *pdata; -}; - -/* default platform data to use if not supplied in the platform_device */ -static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = { - .bus_freq = 100, - .bus_delay = 0, + /* standard bus frequency (kHz) */ + unsigned int bus_freq; + /* Chip has a ICPFUNC register */ + bool has_pfunc; }; static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev, @@ -168,7 +166,6 @@ static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->pdata; u16 psc; u32 clk; u32 d; @@ -212,16 +209,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) if (of_node && of_device_is_compatible(of_node, "ti,keystone-i2c")) d = 6; - clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)); + clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000)); /* Avoid driving the bus too fast because of rounding errors above */ - if (input_clock / (psc + 1) / clk > pdata->bus_freq * 1000) + if (input_clock / (psc + 1) / clk > dev->bus_freq * 1000) clk++; /* * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH * to LOW ratio as 1 to 2 is more safe. */ - if (pdata->bus_freq > 100) + if (dev->bus_freq > 100) clkl = (clk << 1) / 3; else clkl = (clk >> 1); @@ -255,8 +252,6 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) */ static int i2c_davinci_init(struct davinci_i2c_dev *dev) { - struct davinci_i2c_platform_data *pdata = dev->pdata; - /* put I2C into reset */ davinci_i2c_reset_ctrl(dev, 0); @@ -274,8 +269,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG)); dev_dbg(dev->dev, "CLKH = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG)); - dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", - pdata->bus_freq, pdata->bus_delay); + dev_dbg(dev->dev, "bus_freq = %dkHz\n", dev->bus_freq); /* Take the I2C module out of reset: */ @@ -309,12 +303,6 @@ static void davinci_i2c_unprepare_recovery(struct i2c_adapter *adap) i2c_davinci_init(dev); } -static struct i2c_bus_recovery_info davinci_i2c_gpio_recovery_info = { - .recover_bus = i2c_generic_scl_recovery, - .prepare_recovery = davinci_i2c_prepare_recovery, - .unprepare_recovery = davinci_i2c_unprepare_recovery, -}; - static void davinci_i2c_set_scl(struct i2c_adapter *adap, int val) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); @@ -414,7 +402,6 @@ static int i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) { struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); - struct davinci_i2c_platform_data *pdata = dev->pdata; u32 flag; u16 w; unsigned long time_left; @@ -424,10 +411,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) return -EADDRNOTAVAIL; } - /* Introduce a delay, required for some boards (e.g Davinci EVM) */ - if (pdata->bus_delay) - udelay(pdata->bus_delay); - /* set the target address */ davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr); @@ -758,8 +741,8 @@ static int davinci_i2c_probe(struct platform_device *pdev) { struct davinci_i2c_dev *dev; struct i2c_adapter *adap; - struct i2c_bus_recovery_info *rinfo; int r, irq; + u32 prop; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -773,29 +756,15 @@ static int davinci_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq; - dev->pdata = dev_get_platdata(&pdev->dev); platform_set_drvdata(pdev, dev); - if (!dev->pdata && pdev->dev.of_node) { - u32 prop; - - dev->pdata = devm_kzalloc(&pdev->dev, - sizeof(struct davinci_i2c_platform_data), GFP_KERNEL); - if (!dev->pdata) - return -ENOMEM; - - memcpy(dev->pdata, &davinci_i2c_platform_data_default, - sizeof(struct davinci_i2c_platform_data)); - if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency", - &prop)) - dev->pdata->bus_freq = prop / 1000; - - dev->pdata->has_pfunc = - of_property_read_bool(pdev->dev.of_node, - "ti,has-pfunc"); - } else if (!dev->pdata) { - dev->pdata = &davinci_i2c_platform_data_default; - } + r = device_property_read_u32(&pdev->dev, "clock-frequency", &prop); + if (r) + prop = DAVINCI_I2C_DEFAULT_BUS_FREQ; + + dev->bus_freq = prop / 1000; + + dev->has_pfunc = device_property_present(&pdev->dev, "ti,has-pfunc"); dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) @@ -843,23 +812,8 @@ static int davinci_i2c_probe(struct platform_device *pdev) adap->timeout = DAVINCI_I2C_TIMEOUT; adap->dev.of_node = pdev->dev.of_node; - if (dev->pdata->has_pfunc) + if (dev->has_pfunc) adap->bus_recovery_info = &davinci_i2c_scl_recovery_info; - else if (dev->pdata->gpio_recovery) { - rinfo = &davinci_i2c_gpio_recovery_info; - adap->bus_recovery_info = rinfo; - rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", - GPIOD_OUT_HIGH_OPEN_DRAIN); - if (IS_ERR(rinfo->scl_gpiod)) { - r = PTR_ERR(rinfo->scl_gpiod); - goto err_unuse_clocks; - } - rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); - if (IS_ERR(rinfo->sda_gpiod)) { - r = PTR_ERR(rinfo->sda_gpiod); - goto err_unuse_clocks; - } - } adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h deleted file mode 100644 index 98967df07468..000000000000 --- a/include/linux/platform_data/i2c-davinci.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * DaVinci I2C controller platform_device info - * - * Author: Vladimir Barinov, MontaVista Software, Inc. - * - * 2007 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. -*/ - -#ifndef __ASM_ARCH_I2C_H -#define __ASM_ARCH_I2C_H - -/* All frequencies are expressed in kHz */ -struct davinci_i2c_platform_data { - unsigned int bus_freq; /* standard bus frequency (kHz) */ - unsigned int bus_delay; /* post-transaction delay (usec) */ - bool gpio_recovery; /* Use GPIO recovery method */ - bool has_pfunc; /* Chip has a ICPFUNC register */ -}; - -/* for board setup code */ -void davinci_init_i2c(struct davinci_i2c_platform_data *); - -#endif /* __ASM_ARCH_I2C_H */ -- cgit v1.2.3 From 26769582bf353ae613f5113a1414ff3a80e08264 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 17 Dec 2024 12:11:41 -0600 Subject: mfd: syscon: Remove the platform driver support The platform driver is dead code. It is not used by DT platforms since commit bdb0066df96e ("mfd: syscon: Decouple syscon interface from platform devices") which said: For non-DT based platforms, this patch keeps syscon platform driver structure so that syscon can be probed and such non-DT based drivers can use syscon_regmap_lookup_by_pdev API and access regmap handles. Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based, we can completely remove platform driver of syscon, and keep only helper functions to get regmap handles. The last user of syscon_regmap_lookup_by_pdevname() was removed in 2018. syscon_regmap_lookup_by_pdevname() was then removed in 2019, but that commit failed to remove the rest of the platform driver. Signed-off-by: Rob Herring (Arm) Tested-by: Krzysztof Kozlowski Tested-by: Will McVicker Acked-by: Liviu Dudau Reviewed-by: Pankaj Dubey Tested-by: Pankaj Dubey Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241217-syscon-fixes-v2-2-4f56d750541d@kernel.org Signed-off-by: Lee Jones --- drivers/mfd/syscon.c | 66 ------------------------------------ drivers/mfd/vexpress-sysreg.c | 1 - include/linux/platform_data/syscon.h | 9 ----- 3 files changed, 76 deletions(-) delete mode 100644 include/linux/platform_data/syscon.h (limited to 'include/linux/platform_data') diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 72f20de9652d..bfb1f69fcff1 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -12,22 +12,15 @@ #include #include #include -#include -#include #include #include #include #include -#include -#include -#include #include #include #include #include -static struct platform_driver syscon_driver; - static DEFINE_MUTEX(syscon_list_lock); static LIST_HEAD(syscon_list); @@ -337,62 +330,3 @@ struct regmap *syscon_regmap_lookup_by_phandle_optional(struct device_node *np, return regmap; } EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle_optional); - -static int syscon_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct syscon_platform_data *pdata = dev_get_platdata(dev); - struct syscon *syscon; - struct regmap_config syscon_config = syscon_regmap_config; - struct resource *res; - void __iomem *base; - - syscon = devm_kzalloc(dev, sizeof(*syscon), GFP_KERNEL); - if (!syscon) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENOENT; - - base = devm_ioremap(dev, res->start, resource_size(res)); - if (!base) - return -ENOMEM; - - syscon_config.max_register = resource_size(res) - 4; - if (!syscon_config.max_register) - syscon_config.max_register_is_0 = true; - - if (pdata) - syscon_config.name = pdata->label; - syscon->regmap = devm_regmap_init_mmio(dev, base, &syscon_config); - if (IS_ERR(syscon->regmap)) { - dev_err(dev, "regmap init failed\n"); - return PTR_ERR(syscon->regmap); - } - - platform_set_drvdata(pdev, syscon); - - dev_dbg(dev, "regmap %pR registered\n", res); - - return 0; -} - -static const struct platform_device_id syscon_ids[] = { - { "syscon", }, - { } -}; - -static struct platform_driver syscon_driver = { - .driver = { - .name = "syscon", - }, - .probe = syscon_probe, - .id_table = syscon_ids, -}; - -static int __init syscon_init(void) -{ - return platform_driver_register(&syscon_driver); -} -postcore_initcall(syscon_init); diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c index d34d58ce46db..ef03d6cec9ff 100644 --- a/drivers/mfd/vexpress-sysreg.c +++ b/drivers/mfd/vexpress-sysreg.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h deleted file mode 100644 index 2c089dd3e2bd..000000000000 --- a/include/linux/platform_data/syscon.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef PLATFORM_DATA_SYSCON_H -#define PLATFORM_DATA_SYSCON_H - -struct syscon_platform_data { - const char *label; -}; - -#endif -- cgit v1.2.3 From 53078a736fbc60e5d3a1e14f4cd4214003815026 Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Sat, 11 Jan 2025 14:01:53 +1300 Subject: HID: hid-asus: Disable OOBE mode on the ProArt P16 The new ASUS ProArt 16" laptop series come with their keyboards stuck in an Out-Of-Box-Experience mode. While in this mode most functions will not work such as LED control or Fn key combos. The correct init sequence is now done to disable this OOBE. This patch addresses only the ProArt series so far and it is unknown if there may be others, in which case a new quirk may be required. Signed-off-by: Luke D. Jones Co-developed-by: Connor Belli Signed-off-by: Connor Belli Tested-by: Jan Schmidt Signed-off-by: Jiri Kosina --- drivers/hid/hid-asus.c | 26 ++++++++++++++++++++++++++ include/linux/platform_data/x86/asus-wmi.h | 5 +++++ 2 files changed, 31 insertions(+) (limited to 'include/linux/platform_data') diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 506c6f377e7d..46e3e42f9eb5 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -432,6 +432,26 @@ static int asus_kbd_get_functions(struct hid_device *hdev, return ret; } +static int asus_kbd_disable_oobe(struct hid_device *hdev) +{ + const u8 init[][6] = { + { FEATURE_KBD_REPORT_ID, 0x05, 0x20, 0x31, 0x00, 0x08 }, + { FEATURE_KBD_REPORT_ID, 0xBA, 0xC5, 0xC4 }, + { FEATURE_KBD_REPORT_ID, 0xD0, 0x8F, 0x01 }, + { FEATURE_KBD_REPORT_ID, 0xD0, 0x85, 0xFF } + }; + int ret; + + for (size_t i = 0; i < ARRAY_SIZE(init); i++) { + ret = asus_kbd_set_report(hdev, init[i], sizeof(init[i])); + if (ret < 0) + return ret; + } + + hid_info(hdev, "Disabled OOBE for keyboard\n"); + return 0; +} + static void asus_schedule_work(struct asus_kbd_leds *led) { unsigned long flags; @@ -534,6 +554,12 @@ static int asus_kbd_register_leds(struct hid_device *hdev) ret = asus_kbd_init(hdev, FEATURE_KBD_LED_REPORT_ID2); if (ret < 0) return ret; + + if (dmi_match(DMI_PRODUCT_FAMILY, "ProArt P16")) { + ret = asus_kbd_disable_oobe(hdev); + if (ret < 0) + return ret; + } } else { /* Initialize keyboard */ ret = asus_kbd_init(hdev, FEATURE_KBD_REPORT_ID); diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 365e119bebaa..783e2a336861 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -184,6 +184,11 @@ static const struct dmi_system_id asus_use_hid_led_dmi_ids[] = { DMI_MATCH(DMI_PRODUCT_FAMILY, "ROG Flow"), }, }, + { + .matches = { + DMI_MATCH(DMI_PRODUCT_FAMILY, "ProArt P16"), + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "GA403U"), -- cgit v1.2.3