From 9c2c2e62df3fa30fb13fbeb7512a4eede729383b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 27 Feb 2018 01:56:06 +0100 Subject: net: phy: Restore phy_resume() locking assumption commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 5a0c3e53e7c2..d7069539f351 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -924,6 +924,7 @@ void phy_device_remove(struct phy_device *phydev); int phy_init_hw(struct phy_device *phydev); int phy_suspend(struct phy_device *phydev); int phy_resume(struct phy_device *phydev); +int __phy_resume(struct phy_device *phydev); int phy_loopback(struct phy_device *phydev, bool enable); struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phy_interface_t interface); -- cgit v1.2.3 From a2c054a896b8ac794ddcfc7c92e2dc7ec4ed4ed5 Mon Sep 17 00:00:00 2001 From: Brad Mouring Date: Thu, 8 Mar 2018 16:23:03 -0600 Subject: net: phy: Tell caller result of phy_change() In 664fcf123a30e (net: phy: Threaded interrupts allow some simplification) the phy_interrupt system was changed to use a traditional threaded interrupt scheme instead of a workqueue approach. With this change, the phy status check moved into phy_change, which did not report back to the caller whether or not the interrupt was handled. This means that, in the case of a shared phy interrupt, only the first phydev's interrupt registers are checked (since phy_interrupt() would always return IRQ_HANDLED). This leads to interrupt storms when it is a secondary device that's actually the interrupt source. Signed-off-by: Brad Mouring Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 145 +++++++++++++++++++++++++------------------------- include/linux/phy.h | 1 - 2 files changed, 72 insertions(+), 74 deletions(-) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index a6f924fee584..9aabfa1a455a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -617,6 +617,77 @@ static void phy_error(struct phy_device *phydev) phy_trigger_machine(phydev, false); } +/** + * phy_disable_interrupts - Disable the PHY interrupts from the PHY side + * @phydev: target phy_device struct + */ +static int phy_disable_interrupts(struct phy_device *phydev) +{ + int err; + + /* Disable PHY interrupts */ + err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); + if (err) + goto phy_err; + + /* Clear the interrupt */ + err = phy_clear_interrupt(phydev); + if (err) + goto phy_err; + + return 0; + +phy_err: + phy_error(phydev); + + return err; +} + +/** + * phy_change - Called by the phy_interrupt to handle PHY changes + * @phydev: phy_device struct that interrupted + */ +static irqreturn_t phy_change(struct phy_device *phydev) +{ + if (phy_interrupt_is_valid(phydev)) { + if (phydev->drv->did_interrupt && + !phydev->drv->did_interrupt(phydev)) + return IRQ_NONE; + + if (phydev->state == PHY_HALTED) + if (phy_disable_interrupts(phydev)) + goto phy_err; + } + + mutex_lock(&phydev->lock); + if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) + phydev->state = PHY_CHANGELINK; + mutex_unlock(&phydev->lock); + + /* reschedule state queue work to run as soon as possible */ + phy_trigger_machine(phydev, true); + + if (phy_interrupt_is_valid(phydev) && phy_clear_interrupt(phydev)) + goto phy_err; + return IRQ_HANDLED; + +phy_err: + phy_error(phydev); + return IRQ_NONE; +} + +/** + * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes + * @work: work_struct that describes the work to be done + */ +void phy_change_work(struct work_struct *work) +{ + struct phy_device *phydev = + container_of(work, struct phy_device, phy_queue); + + phy_change(phydev); +} + /** * phy_interrupt - PHY interrupt handler * @irq: interrupt line @@ -632,9 +703,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat) if (PHY_HALTED == phydev->state) return IRQ_NONE; /* It can't be ours. */ - phy_change(phydev); - - return IRQ_HANDLED; + return phy_change(phydev); } /** @@ -651,32 +720,6 @@ static int phy_enable_interrupts(struct phy_device *phydev) return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); } -/** - * phy_disable_interrupts - Disable the PHY interrupts from the PHY side - * @phydev: target phy_device struct - */ -static int phy_disable_interrupts(struct phy_device *phydev) -{ - int err; - - /* Disable PHY interrupts */ - err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED); - if (err) - goto phy_err; - - /* Clear the interrupt */ - err = phy_clear_interrupt(phydev); - if (err) - goto phy_err; - - return 0; - -phy_err: - phy_error(phydev); - - return err; -} - /** * phy_start_interrupts - request and enable interrupts for a PHY device * @phydev: target phy_device struct @@ -719,50 +762,6 @@ int phy_stop_interrupts(struct phy_device *phydev) } EXPORT_SYMBOL(phy_stop_interrupts); -/** - * phy_change - Called by the phy_interrupt to handle PHY changes - * @phydev: phy_device struct that interrupted - */ -void phy_change(struct phy_device *phydev) -{ - if (phy_interrupt_is_valid(phydev)) { - if (phydev->drv->did_interrupt && - !phydev->drv->did_interrupt(phydev)) - return; - - if (phydev->state == PHY_HALTED) - if (phy_disable_interrupts(phydev)) - goto phy_err; - } - - mutex_lock(&phydev->lock); - if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state)) - phydev->state = PHY_CHANGELINK; - mutex_unlock(&phydev->lock); - - /* reschedule state queue work to run as soon as possible */ - phy_trigger_machine(phydev, true); - - if (phy_interrupt_is_valid(phydev) && phy_clear_interrupt(phydev)) - goto phy_err; - return; - -phy_err: - phy_error(phydev); -} - -/** - * phy_change_work - Scheduled by the phy_mac_interrupt to handle PHY changes - * @work: work_struct that describes the work to be done - */ -void phy_change_work(struct work_struct *work) -{ - struct phy_device *phydev = - container_of(work, struct phy_device, phy_queue); - - phy_change(phydev); -} - /** * phy_stop - Bring down the PHY link, and stop checking the status * @phydev: target phy_device struct diff --git a/include/linux/phy.h b/include/linux/phy.h index d7069539f351..b260fb336b25 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1012,7 +1012,6 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner); int phy_drivers_register(struct phy_driver *new_driver, int n, struct module *owner); void phy_state_machine(struct work_struct *work); -void phy_change(struct phy_device *phydev); void phy_change_work(struct work_struct *work); void phy_mac_interrupt(struct phy_device *phydev); void phy_start_machine(struct phy_device *phydev); -- cgit v1.2.3 From 5df7af85ecd88e8b5f1f31d6456c3cf38a8bbdda Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Tue, 20 Mar 2018 09:44:52 +0800 Subject: net: phy: Add general dummy stubs for MMD register access For some phy devices, even though they don't support the MMD extended register access, it does have some side effect if we are trying to read/write the MMD registers via indirect method. So introduce general dummy stubs for MMD register access which these devices can use to avoid such side effect. Fixes: b6b5e8a69118 ("gianfar: Disable EEE autoneg by default") Signed-off-by: Kevin Hao Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 17 +++++++++++++++++ include/linux/phy.h | 4 ++++ 2 files changed, 21 insertions(+) (limited to 'include/linux/phy.h') diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index fe16f5894092..74664a6c0cdc 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1673,6 +1673,23 @@ int genphy_config_init(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_config_init); +/* This is used for the phy device which doesn't support the MMD extended + * register access, but it does have side effect when we are trying to access + * the MMD register via indirect method. + */ +int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum) +{ + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(genphy_read_mmd_unsupported); + +int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, + u16 regnum, u16 val) +{ + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(genphy_write_mmd_unsupported); + int genphy_suspend(struct phy_device *phydev) { return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN); diff --git a/include/linux/phy.h b/include/linux/phy.h index b260fb336b25..7c4c2379e010 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -984,6 +984,10 @@ static inline int genphy_no_soft_reset(struct phy_device *phydev) { return 0; } +int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, + u16 regnum); +int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, + u16 regnum, u16 val); /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); -- cgit v1.2.3