From 71f5c63c07e5be7abdce40891778ffbf3cec04f0 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 23 Mar 2016 12:09:18 +0100 Subject: phy: exynos-mipi-video: Add support for Exynos 5420 and 5433 SoCs This patch adds support for MIPI DPHYs found in Exynos5420-compatible (5420, 5422 and 5800) and Exynos5433 SoCs. Those SoCs differs from earlier by different offset of MIPI DPHY registers in PMU controllers (Exynos 5420-compatible case) or by moving MIPI DPHY reset registers to separate system register controllers (Exynos 5433 case). In both case also additional 5th PHY (MIPI CSIS 2) has been added. Acked-by: Sylwester Nawrocki Signed-off-by: Marek Szyprowski Signed-off-by: Kishon Vijay Abraham I --- include/linux/mfd/syscon/exynos5-pmu.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mfd/syscon') diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 9352adc95de6..76f30f940c70 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -38,6 +38,9 @@ /* Exynos5433 specific register definitions */ #define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728) +#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710) +#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714) +#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718) #define EXYNOS5_PHY_ENABLE BIT(0) -- cgit v1.2.3 From 4d31c6109a24892df461b6a98842935e80159a5e Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 2 May 2016 14:09:10 -0500 Subject: PCI: imx6: Implement reset sequence for i.MX6+ I.MX6+ has a dedicated bit for resetting PCIe core, which should be used instead of a regular reset sequence since using the latter will hang the SoC. This commit is based on c34068d48273e24d392d9a49a38be807954420ed from http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git Tested-by: Gary Bisson Signed-off-by: Andrey Smirnov Signed-off-by: Bjorn Helgaas Reviewed-by: Fabio Estevam --- .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 2 +- drivers/pci/host/pci-imx6.c | 23 ++++++++++++++++++++-- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 + 3 files changed, 23 insertions(+), 3 deletions(-) (limited to 'include/linux/mfd/syscon') diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index d742f917505a..83aeb1f5a645 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -4,7 +4,7 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. Required properties: -- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie" +- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie" - reg: base address and length of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 6b5d8c2fe2f2..b741a36a67f3 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -34,7 +34,8 @@ enum imx6_pcie_variants { IMX6Q, - IMX6SX + IMX6SX, + IMX6QP, }; struct imx6_pcie { @@ -256,6 +257,11 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) IMX6SX_GPR5_PCIE_BTNRST_RESET, IMX6SX_GPR5_PCIE_BTNRST_RESET); break; + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_SW_RST, + IMX6Q_GPR1_PCIE_SW_RST); + break; case IMX6Q: /* * If the bootloader already enabled the link we need some @@ -310,6 +316,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0); break; + case IMX6QP: /* FALLTHROUGH */ case IMX6Q: /* power up core phy and enable ref clock */ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, @@ -370,9 +377,20 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) !imx6_pcie->gpio_active_high); } - if (imx6_pcie->variant == IMX6SX) + switch (imx6_pcie->variant) { + case IMX6SX: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); + break; + case IMX6QP: + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_SW_RST, 0); + + usleep_range(200, 500); + break; + case IMX6Q: /* Nothing to do */ + break; + } return 0; @@ -718,6 +736,7 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) static const struct of_device_id imx6_pcie_of_match[] = { { .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, }, { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, }, + { .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, }, {}, }; MODULE_DEVICE_TABLE(of, imx6_pcie_of_match); diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 238c8db953eb..5b08e3c5325f 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -95,6 +95,7 @@ #define IMX6Q_GPR0_DMAREQ_MUX_SEL0_IOMUX BIT(0) #define IMX6Q_GPR1_PCIE_REQ_MASK (0x3 << 30) +#define IMX6Q_GPR1_PCIE_SW_RST BIT(29) #define IMX6Q_GPR1_PCIE_EXIT_L1 BIT(28) #define IMX6Q_GPR1_PCIE_RDY_L23 BIT(27) #define IMX6Q_GPR1_PCIE_ENTER_L1 BIT(26) -- cgit v1.2.3 From 4d2458507d0b465c62ae80f3e81b8c008ec96b05 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 4 May 2016 19:33:59 -0300 Subject: ASoC: fsl_sai: Allow setting the SAI MCLK direction On mx6ul the General Purpose Register 1 (GPR1) contains the following bits for configuring the direction of the SAI MCLKs: SAI1_MCLK_DIR, SAI2_MCLK_DIR, SAI3_MCLK_DIR Introduce the "fsl,sai-mclk-direction-output" optional property to allow configuring the SAI_MCLK outputs. Tested on a imx6ul-evk board. Signed-off-by: Fabio Estevam Acked-by: Nicolin Chen Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 5 +++++ include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 6 ++++++ sound/soc/fsl/fsl_sai.c | 20 ++++++++++++++++++++ 3 files changed, 31 insertions(+) (limited to 'include/linux/mfd/syscon') diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 777b941d6cbe..740b467adf7d 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -48,6 +48,11 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately. +Optional properties (for mx6ul): + + - fsl,sai-mclk-direction-output: This is a boolean property. If present, + indicates that SAI will output the SAI MCLK clock. + Note: - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 238c8db953eb..68353822afce 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -447,5 +447,11 @@ #define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18) #define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17) #define IMX6UL_GPR1_ENET_CLK_OUTPUT (0x3 << 17) +#define IMX6UL_GPR1_SAI1_MCLK_DIR (0x1 << 19) +#define IMX6UL_GPR1_SAI2_MCLK_DIR (0x1 << 20) +#define IMX6UL_GPR1_SAI3_MCLK_DIR (0x1 << 21) +#define IMX6UL_GPR1_SAI_MCLK_MASK (0x7 << 19) +#define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \ + IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR) #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index d8b673f7c577..2147994ab46f 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include "fsl_sai.h" #include "imx-pcm.h" @@ -786,10 +788,12 @@ static int fsl_sai_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct fsl_sai *sai; + struct regmap *gpr; struct resource *res; void __iomem *base; char tmp[8]; int irq, ret, i; + int index; sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); if (!sai) @@ -878,6 +882,22 @@ static int fsl_sai_probe(struct platform_device *pdev) fsl_sai_dai.symmetric_samplebits = 0; } + if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) && + of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) { + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr"); + if (IS_ERR(gpr)) { + dev_err(&pdev->dev, "cannot find iomuxc registers\n"); + return PTR_ERR(gpr); + } + + index = of_alias_get_id(np, "sai"); + if (index < 0) + return index; + + regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index), + MCLK_DIR(index)); + } + sai->dma_params_rx.addr = res->start + FSL_SAI_RDR; sai->dma_params_tx.addr = res->start + FSL_SAI_TDR; sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX; -- cgit v1.2.3