From 97b697a11b07e2ebfa69c488132596cc5eb24119 Mon Sep 17 00:00:00 2001 From: Taisuke Yamada Date: Sat, 13 Sep 2008 16:46:15 -0400 Subject: [libata] LBA28/LBA48 off-by-one bug in ata.h I recently bought 3 HGST P7K500-series 500GB SATA drives and had trouble accessing the block right on the LBA28-LBA48 border. Here's how it fails (same for all 3 drives): # dd if=/dev/sdc bs=512 count=1 skip=268435455 > /dev/null dd: reading `/dev/sdc': Input/output error 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.288033 seconds, 0.0 kB/s # dmesg ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: BMDMA stat 0x25 ata1.00: cmd c8/00:08:f8:ff:ff/00:00:00:00:00/ef tag 0 dma 4096 in res 51/04:08:f8:ff:ff/00:00:00:00:00/ef Emask 0x1 (device error) ata1.00: status: { DRDY ERR } ata1.00: error: { ABRT } ata1.00: configured for UDMA/33 ata1: EH complete ... After some investigations, it turned out this seems to be caused by misinterpretation of the ATA specification on LBA28 access. Following part is the code in question: === include/linux/ata.h === static inline int lba_28_ok(u64 block, u32 n_block) { /* check the ending block number */ return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256); } HGST drive (sometimes) fails with LBA28 access of {block = 0xfffffff, n_block = 1}, and this behavior seems to be comformant. Other drives, including other HGST drives are not that strict, through. >From the ATA specification: (http://www.t13.org/Documents/UploadedDocuments/project/d1410r3b-ATA-ATAPI-6.pdf) 8.15.29 Word (61:60): Total number of user addressable sectors This field contains a value that is one greater than the total number of user addressable sectors (see 6.2). The maximum value that shall be placed in this field is 0FFFFFFFh. So the driver shouldn't use the value of 0xfffffff for LBA28 request as this exceeds maximum user addressable sector. The logical maximum value for LBA28 is 0xffffffe. The obvious fix is to cut "- 1" part, and the patch attached just do that. I've been using the patched kernel for about a month now, and the same fix is also floating on the net for some time. So I believe this fix works reliably. Just FYI, many Windows/Intel platform users also seems to be struck by this, and HGST has issued a note pointing to Intel ICH8/9 driver. "28-bit LBA command is being used to access LBAs 29-bits in length" http://www.hitachigst.com/hddt/knowtree.nsf/cffe836ed7c12018862565b000530c74/b531b8bce8745fb78825740f00580e23 Also, *BSDs seems to have similar fix included sometime around ~2004, through I have not checked out exact portion of the code. Signed-off-by: Taisuke Yamada Signed-off-by: Jeff Garzik --- include/linux/ata.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index 1ce19c1ef0e9..8a12d718c169 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -745,7 +745,7 @@ static inline int ata_ok(u8 status) static inline int lba_28_ok(u64 block, u32 n_block) { /* check the ending block number */ - return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256); + return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256); } static inline int lba_48_ok(u64 block, u32 n_block) -- cgit v1.2.3 From ea6ce53cd5d005455ec0a3cc1d45d3af0cb90919 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Fri, 19 Sep 2008 23:46:01 +0200 Subject: [libata] Introduce ata_id_has_unload() Add a function to check an ATA device's id for head unload support as specified in ATA-7. Signed-off-by: Elias Oltmanns Signed-off-by: Jeff Garzik --- include/linux/ata.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index 8a12d718c169..a26ebd25bac1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -667,6 +667,15 @@ static inline int ata_id_has_dword_io(const u16 *id) return 0; } +static inline int ata_id_has_unload(const u16 *id) +{ + if (ata_id_major_version(id) >= 7 && + (id[ATA_ID_CFSSE] & 0xC000) == 0x4000 && + id[ATA_ID_CFSSE] & (1 << 13)) + return 1; + return 0; +} + static inline int ata_id_current_chs_valid(const u16 *id) { /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command -- cgit v1.2.3 From 8bff7c6b0f63c7ee9c5e3a076338d74125b8debb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 24 Sep 2008 13:05:10 +0200 Subject: libata: set queue SSD flag for SSD devices SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: Jens Axboe --- drivers/ata/libata-scsi.c | 4 ++++ include/linux/ata.h | 6 ++++++ 2 files changed, 10 insertions(+) (limited to 'include/linux/ata.h') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9d3ba423cb2..054370700abf 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -977,6 +977,10 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN); } else { + if (ata_id_is_ssd(dev->id)) + queue_flag_set_unlocked(QUEUE_FLAG_NONROT, + sdev->request_queue); + /* ATA devices must be sector aligned */ blk_queue_update_dma_alignment(sdev->request_queue, ATA_SECT_SIZE - 1); diff --git a/include/linux/ata.h b/include/linux/ata.h index 8a12d718c169..c1c8b4a4ba26 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -88,6 +88,7 @@ enum { ATA_ID_DLF = 128, ATA_ID_CSFO = 129, ATA_ID_CFA_POWER = 160, + ATA_ID_ROT_SPEED = 217, ATA_ID_PIO4 = (1 << 1), ATA_ID_SERNO_LEN = 20, @@ -691,6 +692,11 @@ static inline int ata_id_is_cfa(const u16 *id) return 0; } +static inline int ata_id_is_ssd(const u16 *id) +{ + return id[ATA_ID_ROT_SPEED] == 0x01; +} + static inline int ata_drive_40wire(const u16 *dev_id) { if (ata_id_is_sata(dev_id)) -- cgit v1.2.3 From 367d7e78dd48cf6ad35182a99d97abb5486e040e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:30 +0200 Subject: ide: ide_dev_is_sata() -> ata_id_is_sata() * Use optimized ATA version check from Sergei in ata_id_is_sata(). * ide_dev_is_sata() -> ata_id_is_sata() Cc: Jeff Garzik Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 2 +- drivers/ide/pci/hpt366.c | 4 ++-- include/linux/ata.h | 10 +++++++++- include/linux/ide.h | 13 ------------- 4 files changed, 12 insertions(+), 17 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 6256c2df62cc..0a2fd3b37ac4 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -630,7 +630,7 @@ u8 eighty_ninty_three (ide_drive_t *drive) printk(KERN_DEBUG "%s: skipping word 93 validity check\n", drive->name); - if (ide_dev_is_sata(id) && !ivb) + if (ata_id_is_sata(id) && !ivb) return 1; if (hwif->cbl != ATA_CBL_PATA80 && !ivb) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index d706eb6b8acd..9056e3acc78b 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -654,7 +654,7 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive) case HPT372A: case HPT372N: case HPT374 : - if (ide_dev_is_sata(drive->id)) + if (ata_id_is_sata(drive->id)) mask &= ~0x0e; /* Fall thru */ default: @@ -674,7 +674,7 @@ static u8 hpt3xx_mdma_filter(ide_drive_t *drive) case HPT372A: case HPT372N: case HPT374 : - if (ide_dev_is_sata(drive->id)) + if (ata_id_is_sata(drive->id)) return 0x00; /* Fall thru */ default: diff --git a/include/linux/ata.h b/include/linux/ata.h index be00973d1a8c..d28aad991c75 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -645,7 +645,15 @@ static inline unsigned int ata_id_major_version(const u16 *id) static inline int ata_id_is_sata(const u16 *id) { - return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0; + /* + * See if word 93 is 0 AND drive is at least ATA-5 compatible + * verifying that word 80 by casting it to a signed type -- + * this trick allows us to filter out the reserved values of + * 0x0000 and 0xffff along with the earlier ATA revisions... + */ + if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020) + return 1; + return 0; } static inline int ata_id_has_tpm(const u16 *id) diff --git a/include/linux/ide.h b/include/linux/ide.h index 27829c13bef7..87b5b5d39539 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1382,19 +1382,6 @@ const char *ide_xfer_verbose(u8 mode); extern void ide_toggle_bounce(ide_drive_t *drive, int on); extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate); -static inline int ide_dev_is_sata(u16 *id) -{ - /* - * See if word 93 is 0 AND drive is at least ATA-5 compatible - * verifying that word 80 by casting it to a signed type -- - * this trick allows us to filter out the reserved values of - * 0x0000 and 0xffff along with the earlier ATA revisions... - */ - if (id[ATA_ID_HW_CONFIG] == 0 && (short)id[ATA_ID_MAJOR_VER] >= 0x0020) - return 1; - return 0; -} - u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); -- cgit v1.2.3 From 942dcd85bf8edf38cdc3745306ca250684d99a61 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:30 +0200 Subject: ide: idedisk_supports_lba48() -> ata_id_lba48_enabled() * Add ata_id_lba48_enabled() inline helper to . * idedisk_supports_lba48() -> ata_id_lba48_enabled() The latter one also checks validity of words 83 & 86. Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 21 ++++++--------------- include/linux/ata.h | 9 +++++++++ 2 files changed, 15 insertions(+), 15 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 08f47cb13425..8f49bc0ecbf8 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -383,16 +383,6 @@ static unsigned long long sectors_to_MB(unsigned long long n) return n; } -/* - * The same here. - */ -static inline int idedisk_supports_lba48(const u16 *id) -{ - return (id[ATA_ID_COMMAND_SET_2] & 0x0400) && - (id[ATA_ID_CFS_ENABLE_2] & 0x0400) && - ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); -} - /* * Some disks report total number of sectors instead of * maximum sector address. We list them here. @@ -407,7 +397,7 @@ static const struct drive_list_entry hpa_list[] = { static void idedisk_check_hpa(ide_drive_t *drive) { unsigned long long capacity, set_max; - int lba48 = idedisk_supports_lba48(drive->id); + int lba48 = ata_id_lba48_enabled(drive->id); capacity = drive->capacity64; @@ -450,7 +440,7 @@ static void init_idedisk_capacity(ide_drive_t *drive) */ int hpa = ata_id_hpa_enabled(id); - if (idedisk_supports_lba48(id)) { + if (ata_id_lba48_enabled(id)) { /* drive speaks 48-bit LBA */ drive->select.b.lba = 1; drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); @@ -754,9 +744,11 @@ static int set_lba_addressing(ide_drive_t *drive, int arg) if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) return 0; - if (!idedisk_supports_lba48(drive->id)) + if (ata_id_lba48_enabled(drive->id) == 0) return -EIO; + drive->addressing = arg; + return 0; } @@ -853,8 +845,7 @@ static void idedisk_setup(ide_drive_t *drive) capacity = idedisk_capacity(drive); if (!drive->forced_geom) { - - if (idedisk_supports_lba48(drive->id)) { + if (ata_id_lba48_enabled(drive->id)) { /* compatibility */ drive->bios_sect = 63; drive->bios_head = 255; diff --git a/include/linux/ata.h b/include/linux/ata.h index d28aad991c75..8162257b474f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -574,6 +574,15 @@ static inline int ata_id_has_lba48(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 10); } +static inline int ata_id_lba48_enabled(const u16 *id) +{ + if (ata_id_has_lba48(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + return id[ATA_ID_CFS_ENABLE_2] & (1 << 10); +} + static inline int ata_id_hpa_enabled(const u16 *id) { /* Yes children, word 83 valid bits cover word 82 data */ -- cgit v1.2.3 From 4b58f17d7c45a8e5f4acda641bec388398b9c0fa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:30 +0200 Subject: ide: ide_id_has_flush_cache() -> ata_id_flush_enabled() * Add ata_id_flush_enabled() inline helper to . * ide_id_has_flush_cache() -> ata_id_flush_enabled() The latter one also checks if the command is marked as supported in word 83 and validity of words 83 & 86. Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 6 +++--- drivers/ide/ide-io.c | 2 +- include/linux/ata.h | 9 +++++++++ include/linux/ide.h | 3 --- 4 files changed, 13 insertions(+), 7 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 8f49bc0ecbf8..7b24dff17460 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -651,7 +651,7 @@ static void update_ordered(ide_drive_t *drive) * not available so we don't need to recheck that. */ capacity = idedisk_capacity(drive); - barrier = ide_id_has_flush_cache(id) && !drive->noflush && + barrier = ata_id_flush_enabled(id) && !drive->noflush && (drive->addressing == 0 || capacity <= (1ULL << 28) || ide_id_has_flush_cache_ext(id)); @@ -678,7 +678,7 @@ static int set_wcache(ide_drive_t *drive, int arg) if (arg < 0 || arg > 1) return -EINVAL; - if (ide_id_has_flush_cache(drive->id)) { + if (ata_id_flush_enabled(drive->id)) { memset(&args, 0, sizeof(ide_task_t)); args.tf.feature = arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF; @@ -886,7 +886,7 @@ static void idedisk_setup(ide_drive_t *drive) static void ide_cacheflush_p(ide_drive_t *drive) { - if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) + if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) return; if (do_idedisk_flushcache(drive)) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 99e0bbca3ace..c1596178fcae 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -184,7 +184,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) break; /* Not supported? Switch to next step now. */ - if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) { + if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) { ide_complete_power_step(drive, rq, 0, 0); return ide_stopped; } diff --git a/include/linux/ata.h b/include/linux/ata.h index 8162257b474f..921cf0fc337f 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -558,6 +558,15 @@ static inline int ata_id_has_flush(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 12); } +static inline int ata_id_flush_enabled(const u16 *id) +{ + if (ata_id_has_flush(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + return id[ATA_ID_CFS_ENABLE_2] & (1 << 12); +} + static inline int ata_id_has_flush_ext(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) diff --git a/include/linux/ide.h b/include/linux/ide.h index 6e22cd20dd8b..d2213d7cc4cb 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1453,9 +1453,6 @@ extern struct mutex ide_cfg_mtx; extern struct bus_type ide_bus_type; extern struct class *ide_port_class; -/* check if CACHE FLUSH command is supported (as defined in ATA-6) */ -#define ide_id_has_flush_cache(id) ((id)[ATA_ID_CFS_ENABLE_2] & 0x1000) - /* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */ #define ide_id_has_flush_cache_ext(id) \ (((id)[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400) -- cgit v1.2.3 From ff2779b568e70822e0ef2cc7afeeefbe7c607652 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:31 +0200 Subject: ide: ide_id_has_flush_cache_ext() -> ata_id_flush_ext_enabled() * Add ata_id_flush_ext_enabled() inline helper to . * ide_id_has_flush_cache_ext() -> ata_id_flush_ext_enabled() The latter one also checks if the command is marked as supported in word 83 and validity of words 83 & 86. Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 6 +++--- drivers/ide/ide-io.c | 2 +- include/linux/ata.h | 13 +++++++++++++ include/linux/ide.h | 4 ---- 4 files changed, 17 insertions(+), 8 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7b24dff17460..587d5aac7d5d 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -576,7 +576,7 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) BUG_ON(task == NULL); memset(task, 0, sizeof(*task)); - if (ide_id_has_flush_cache_ext(drive->id) && + if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) task->tf.command = ATA_CMD_FLUSH_EXT; else @@ -653,7 +653,7 @@ static void update_ordered(ide_drive_t *drive) capacity = idedisk_capacity(drive); barrier = ata_id_flush_enabled(id) && !drive->noflush && (drive->addressing == 0 || capacity <= (1ULL << 28) || - ide_id_has_flush_cache_ext(id)); + ata_id_flush_ext_enabled(id)); printk(KERN_INFO "%s: cache flushes %ssupported\n", drive->name, barrier ? "" : "not "); @@ -699,7 +699,7 @@ static int do_idedisk_flushcache(ide_drive_t *drive) ide_task_t args; memset(&args, 0, sizeof(ide_task_t)); - if (ide_id_has_flush_cache_ext(drive->id)) + if (ata_id_flush_ext_enabled(drive->id)) args.tf.command = ATA_CMD_FLUSH_EXT; else args.tf.command = ATA_CMD_FLUSH; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c1596178fcae..ec6664b0d3a9 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -188,7 +188,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * ide_complete_power_step(drive, rq, 0, 0); return ide_stopped; } - if (ide_id_has_flush_cache_ext(drive->id)) + if (ata_id_flush_ext_enabled(drive->id)) args->tf.command = ATA_CMD_FLUSH_EXT; else args->tf.command = ATA_CMD_FLUSH; diff --git a/include/linux/ata.h b/include/linux/ata.h index 921cf0fc337f..81d9adeb819e 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -574,6 +574,19 @@ static inline int ata_id_has_flush_ext(const u16 *id) return id[ATA_ID_COMMAND_SET_2] & (1 << 13); } +static inline int ata_id_flush_ext_enabled(const u16 *id) +{ + if (ata_id_has_flush_ext(id) == 0) + return 0; + if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000) + return 0; + /* + * some Maxtor disks have bit 13 defined incorrectly + * so check bit 10 too + */ + return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400; +} + static inline int ata_id_has_lba48(const u16 *id) { if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000) diff --git a/include/linux/ide.h b/include/linux/ide.h index d2213d7cc4cb..432eb98f7fe7 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1453,10 +1453,6 @@ extern struct mutex ide_cfg_mtx; extern struct bus_type ide_bus_type; extern struct class *ide_port_class; -/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */ -#define ide_id_has_flush_cache_ext(id) \ - (((id)[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400) - static inline void ide_dump_identify(u8 *id) { print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0); -- cgit v1.2.3 From 93734a234447a3c091f76d76f7351af9d4dde518 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:31 +0200 Subject: ide: ide_id_to_hd_driveid() -> ata_id_to_hd_driveid() Rename ide_id_to_hd_driveid() to ata_id_to_hd_driveid() and move it to . Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 22 +--------------------- include/linux/ata.h | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 21 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 12618d2aed2c..f42de5fe9bc2 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -509,26 +509,6 @@ static int generic_drive_reset(ide_drive_t *drive) return ret; } -static inline void ide_id_to_hd_driveid(u16 *id) -{ -#ifdef __BIG_ENDIAN - /* accessed in struct hd_driveid as 8-bit values */ - id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]); - id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]); - id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]); - id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]); - id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]); - - /* as 32-bit values */ - *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY); - *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG); - - /* as 64-bit value */ - *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] = - ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); -#endif -} - static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) { @@ -548,7 +528,7 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd, } memcpy(id, drive->id, size); - ide_id_to_hd_driveid(id); + ata_id_to_hd_driveid(id); if (copy_to_user((void __user *)arg, id, size)) rc = -EFAULT; diff --git a/include/linux/ata.h b/include/linux/ata.h index 81d9adeb819e..4c3f50070033 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -30,6 +30,7 @@ #define __LINUX_ATA_H__ #include +#include /* defines only for the constants which don't work well as enums */ #define ATA_DMA_BOUNDARY 0xffffUL @@ -781,6 +782,26 @@ static inline int atapi_id_dmadir(const u16 *dev_id) return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000); } +static inline void ata_id_to_hd_driveid(u16 *id) +{ +#ifdef __BIG_ENDIAN + /* accessed in struct hd_driveid as 8-bit values */ + id[ATA_ID_MAX_MULTSECT] = __cpu_to_le16(id[ATA_ID_MAX_MULTSECT]); + id[ATA_ID_CAPABILITY] = __cpu_to_le16(id[ATA_ID_CAPABILITY]); + id[ATA_ID_OLD_PIO_MODES] = __cpu_to_le16(id[ATA_ID_OLD_PIO_MODES]); + id[ATA_ID_OLD_DMA_MODES] = __cpu_to_le16(id[ATA_ID_OLD_DMA_MODES]); + id[ATA_ID_MULTSECT] = __cpu_to_le16(id[ATA_ID_MULTSECT]); + + /* as 32-bit values */ + *(u32 *)&id[ATA_ID_LBA_CAPACITY] = ata_id_u32(id, ATA_ID_LBA_CAPACITY); + *(u32 *)&id[ATA_ID_SPG] = ata_id_u32(id, ATA_ID_SPG); + + /* as 64-bit value */ + *(u64 *)&id[ATA_ID_LBA_CAPACITY_2] = + ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); +#endif +} + static inline int is_multi_taskfile(struct ata_taskfile *tf) { return (tf->command == ATA_CMD_READ_MULTI) || -- cgit v1.2.3 From a02227c9774b3bff08c7f557d06247e0a03ac435 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 10 Oct 2008 22:39:31 +0200 Subject: ide: lba_capacity_is_ok() -> ata_id_is_lba_capacity_ok() Rename lba_capacity_is_ok() to ata_id_is_lba_capacity_ok() and move it to (remove needless parens while at it). Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 52 +------------------------------------------------- include/linux/ata.h | 50 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+), 51 deletions(-) (limited to 'include/linux/ata.h') diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 587d5aac7d5d..43025c9d8355 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -88,56 +88,6 @@ static void ide_disk_put(struct ide_disk_obj *idkp) mutex_unlock(&idedisk_ref_mutex); } -/* - * lba_capacity_is_ok() performs a sanity check on the claimed "lba_capacity" - * value for this drive (from its reported identification information). - * - * Returns: 1 if lba_capacity looks sensible - * 0 otherwise - * - * It is called only once for each drive. - */ -static int lba_capacity_is_ok(u16 *id) -{ - unsigned long lba_sects, chs_sects, head, tail; - - /* No non-LBA info .. so valid! */ - if (id[ATA_ID_CYLS] == 0) - return 1; - - lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY); - - /* - * The ATA spec tells large drives to return - * C/H/S = 16383/16/63 independent of their size. - * Some drives can be jumpered to use 15 heads instead of 16. - * Some drives can be jumpered to use 4092 cyls instead of 16383. - */ - if ((id[ATA_ID_CYLS] == 16383 || - (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) && - id[ATA_ID_SECTORS] == 63 && - (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) && - (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS])) - return 1; - - chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS]; - - /* perform a rough sanity check on lba_sects: within 10% is OK */ - if ((lba_sects - chs_sects) < chs_sects/10) - return 1; - - /* some drives have the word order reversed */ - head = ((lba_sects >> 16) & 0xffff); - tail = (lba_sects & 0xffff); - lba_sects = (head | (tail << 16)); - if ((lba_sects - chs_sects) < chs_sects/10) { - *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects); - return 1; /* lba_capacity is (now) good */ - } - - return 0; /* lba_capacity value may be bad */ -} - static const u8 ide_rw_cmds[] = { ATA_CMD_READ_MULTI, ATA_CMD_WRITE_MULTI, @@ -446,7 +396,7 @@ static void init_idedisk_capacity(ide_drive_t *drive) drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); if (hpa) idedisk_check_hpa(drive); - } else if (ata_id_has_lba(id) && lba_capacity_is_ok(id)) { + } else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) { /* drive speaks 28-bit LBA */ drive->select.b.lba = 1; drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY); diff --git a/include/linux/ata.h b/include/linux/ata.h index 4c3f50070033..a53318b8cbd0 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -782,6 +782,56 @@ static inline int atapi_id_dmadir(const u16 *dev_id) return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000); } +/* + * ata_id_is_lba_capacity_ok() performs a sanity check on + * the claimed LBA capacity value for the device. + * + * Returns 1 if LBA capacity looks sensible, 0 otherwise. + * + * It is called only once for each device. + */ +static inline int ata_id_is_lba_capacity_ok(u16 *id) +{ + unsigned long lba_sects, chs_sects, head, tail; + + /* No non-LBA info .. so valid! */ + if (id[ATA_ID_CYLS] == 0) + return 1; + + lba_sects = ata_id_u32(id, ATA_ID_LBA_CAPACITY); + + /* + * The ATA spec tells large drives to return + * C/H/S = 16383/16/63 independent of their size. + * Some drives can be jumpered to use 15 heads instead of 16. + * Some drives can be jumpered to use 4092 cyls instead of 16383. + */ + if ((id[ATA_ID_CYLS] == 16383 || + (id[ATA_ID_CYLS] == 4092 && id[ATA_ID_CUR_CYLS] == 16383)) && + id[ATA_ID_SECTORS] == 63 && + (id[ATA_ID_HEADS] == 15 || id[ATA_ID_HEADS] == 16) && + (lba_sects >= 16383 * 63 * id[ATA_ID_HEADS])) + return 1; + + chs_sects = id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * id[ATA_ID_SECTORS]; + + /* perform a rough sanity check on lba_sects: within 10% is OK */ + if (lba_sects - chs_sects < chs_sects/10) + return 1; + + /* some drives have the word order reversed */ + head = (lba_sects >> 16) & 0xffff; + tail = lba_sects & 0xffff; + lba_sects = head | (tail << 16); + + if (lba_sects - chs_sects < chs_sects/10) { + *(__le32 *)&id[ATA_ID_LBA_CAPACITY] = __cpu_to_le32(lba_sects); + return 1; /* LBA capacity is (now) good */ + } + + return 0; /* LBA capacity value may be bad */ +} + static inline void ata_id_to_hd_driveid(u16 *id) { #ifdef __BIG_ENDIAN -- cgit v1.2.3