From 34539b442b3bc7d5bf10164750302b60b91f18a7 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 14 Jun 2023 10:18:23 +0300 Subject: bus: ti-sysc: Flush posted write on enable before reset The am335x devices started producing boot errors for resetting musb module in because of subtle timing changes: Unhandled fault: external abort on non-linefetch (0x1008) ... sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12 sysc_reset from sysc_probe+0xa99/0xeb0 ... The fix is to flush posted write after enable before reset during probe. Note that some devices also need to specify the delay after enable with ti,sysc-delay-us, but this is not needed for musb on am335x based on my tests. Reported-by: kernelci.org bot Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset") Signed-off-by: Tony Lindgren --- drivers/bus/ti-sysc.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 21fe9854703f..4cb23b9e06ea 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -2142,6 +2142,8 @@ static int sysc_reset(struct sysc *ddata) sysc_val = sysc_read_sysconfig(ddata); sysc_val |= sysc_mask; sysc_write(ddata, sysc_offset, sysc_val); + /* Flush posted write */ + sysc_val = sysc_read_sysconfig(ddata); } if (ddata->cfg.srst_udelay) -- cgit v1.2.3 From 9b53a13422162feac7c7ee58e5bc0e0a80a41963 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Tue, 20 Jun 2023 13:01:59 -0400 Subject: counter: Fix menuconfig "Counter support" submenu entries disappearance The current placement of the I8254 Kconfig entry results in the disappearance of the "Counter support" submenu items in menuconfig. Move the I8254 above the menuconfig COUNTER entry to restore the intended submenu behavior. Fixes: d428487471ba ("counter: i8254: Introduce the Intel 8254 interface library module") Reported-by: Jarkko Nikula Closes: https://lore.kernel.org/all/32ddaa7b-53a8-d61f-d526-b545bd561337@linux.intel.com/ Reviewed-by: Randy Dunlap Tested-by: Jarkko Nikula Reviewed-by: Jarkko Nikula Link: https://lore.kernel.org/r/20230620170159.556788-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray --- drivers/counter/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index a61a4b9b8ec6..86536c2cc531 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -3,13 +3,6 @@ # Counter devices # -menuconfig COUNTER - tristate "Counter support" - help - This enables counter device support through the Generic Counter - interface. You only need to enable this, if you also want to enable - one or more of the counter device drivers below. - config I8254 tristate select COUNTER @@ -25,6 +18,13 @@ config I8254 If built as a module its name will be i8254. +menuconfig COUNTER + tristate "Counter support" + help + This enables counter device support through the Generic Counter + interface. You only need to enable this, if you also want to enable + one or more of the counter device drivers below. + if COUNTER config 104_QUAD_8 -- cgit v1.2.3 From a6fe043880820981f6e4918240f967ea79bb063e Mon Sep 17 00:00:00 2001 From: Kameron Carr Date: Fri, 23 Jun 2023 15:09:49 -0700 Subject: Drivers: hv: Change hv_free_hyperv_page() to take void * argument Currently hv_free_hyperv_page() takes an unsigned long argument, which is inconsistent with the void * return value from the corresponding hv_alloc_hyperv_page() function and variants. This creates unnecessary extra casting. Change the hv_free_hyperv_page() argument type to void *. Also remove redundant casts from invocations of hv_alloc_hyperv_page() and variants. Signed-off-by: Kameron Carr Reviewed-by: Nuno Das Neves Reviewed-by: Dexuan Cui Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com Signed-off-by: Wei Liu --- drivers/hv/connection.c | 13 ++++++------- drivers/hv/hv_common.c | 10 +++++----- include/asm-generic/mshyperv.h | 2 +- 3 files changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index 5978e9dbc286..ebf15f31d97e 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -209,8 +209,7 @@ int vmbus_connect(void) * Setup the vmbus event connection for channel interrupt * abstraction stuff */ - vmbus_connection.int_page = - (void *)hv_alloc_hyperv_zeroed_page(); + vmbus_connection.int_page = hv_alloc_hyperv_zeroed_page(); if (vmbus_connection.int_page == NULL) { ret = -ENOMEM; goto cleanup; @@ -225,8 +224,8 @@ int vmbus_connect(void) * Setup the monitor notification facility. The 1st page for * parent->child and the 2nd page for child->parent */ - vmbus_connection.monitor_pages[0] = (void *)hv_alloc_hyperv_page(); - vmbus_connection.monitor_pages[1] = (void *)hv_alloc_hyperv_page(); + vmbus_connection.monitor_pages[0] = hv_alloc_hyperv_page(); + vmbus_connection.monitor_pages[1] = hv_alloc_hyperv_page(); if ((vmbus_connection.monitor_pages[0] == NULL) || (vmbus_connection.monitor_pages[1] == NULL)) { ret = -ENOMEM; @@ -333,15 +332,15 @@ void vmbus_disconnect(void) destroy_workqueue(vmbus_connection.work_queue); if (vmbus_connection.int_page) { - hv_free_hyperv_page((unsigned long)vmbus_connection.int_page); + hv_free_hyperv_page(vmbus_connection.int_page); vmbus_connection.int_page = NULL; } set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[0], 1); set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[1], 1); - hv_free_hyperv_page((unsigned long)vmbus_connection.monitor_pages[0]); - hv_free_hyperv_page((unsigned long)vmbus_connection.monitor_pages[1]); + hv_free_hyperv_page(vmbus_connection.monitor_pages[0]); + hv_free_hyperv_page(vmbus_connection.monitor_pages[1]); vmbus_connection.monitor_pages[0] = NULL; vmbus_connection.monitor_pages[1] = NULL; } diff --git a/drivers/hv/hv_common.c b/drivers/hv/hv_common.c index 542a1d53b303..6a2258fef1fe 100644 --- a/drivers/hv/hv_common.c +++ b/drivers/hv/hv_common.c @@ -115,12 +115,12 @@ void *hv_alloc_hyperv_zeroed_page(void) } EXPORT_SYMBOL_GPL(hv_alloc_hyperv_zeroed_page); -void hv_free_hyperv_page(unsigned long addr) +void hv_free_hyperv_page(void *addr) { if (PAGE_SIZE == HV_HYP_PAGE_SIZE) - free_page(addr); + free_page((unsigned long)addr); else - kfree((void *)addr); + kfree(addr); } EXPORT_SYMBOL_GPL(hv_free_hyperv_page); @@ -253,7 +253,7 @@ static void hv_kmsg_dump_unregister(void) atomic_notifier_chain_unregister(&panic_notifier_list, &hyperv_panic_report_block); - hv_free_hyperv_page((unsigned long)hv_panic_page); + hv_free_hyperv_page(hv_panic_page); hv_panic_page = NULL; } @@ -270,7 +270,7 @@ static void hv_kmsg_dump_register(void) ret = kmsg_dump_register(&hv_kmsg_dumper); if (ret) { pr_err("Hyper-V: kmsg dump register error 0x%x\n", ret); - hv_free_hyperv_page((unsigned long)hv_panic_page); + hv_free_hyperv_page(hv_panic_page); hv_panic_page = NULL; } } diff --git a/include/asm-generic/mshyperv.h b/include/asm-generic/mshyperv.h index 402a8c1c202d..a8f4b653ef4e 100644 --- a/include/asm-generic/mshyperv.h +++ b/include/asm-generic/mshyperv.h @@ -190,7 +190,7 @@ int hv_common_cpu_die(unsigned int cpu); void *hv_alloc_hyperv_page(void); void *hv_alloc_hyperv_zeroed_page(void); -void hv_free_hyperv_page(unsigned long addr); +void hv_free_hyperv_page(void *addr); /** * hv_cpu_number_to_vp_number() - Map CPU to VP. -- cgit v1.2.3 From 55e544e1a922d272b62ec576a3de92329f838ce9 Mon Sep 17 00:00:00 2001 From: Nischala Yelchuri Date: Tue, 20 Jun 2023 11:40:38 -0700 Subject: x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg Several places in code for Hyper-V reference the per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line sequence to reference the variable, and usually includes a cast. Newer code does a much simpler direct assignment. The latter is preferable as the complexity of the older code is unnecessary. Update older code to use the simpler direct assignment. Signed-off-by: Nischala Yelchuri Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com Signed-off-by: Wei Liu --- arch/x86/hyperv/hv_apic.c | 4 +--- arch/x86/hyperv/ivm.c | 7 +++---- arch/x86/hyperv/mmu.c | 12 ++---------- arch/x86/hyperv/nested.c | 11 ++--------- drivers/hv/hv_balloon.c | 2 +- 5 files changed, 9 insertions(+), 27 deletions(-) (limited to 'drivers') diff --git a/arch/x86/hyperv/hv_apic.c b/arch/x86/hyperv/hv_apic.c index 1fbda2f94184..b21335e6a210 100644 --- a/arch/x86/hyperv/hv_apic.c +++ b/arch/x86/hyperv/hv_apic.c @@ -107,7 +107,6 @@ static bool cpu_is_self(int cpu) static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector, bool exclude_self) { - struct hv_send_ipi_ex **arg; struct hv_send_ipi_ex *ipi_arg; unsigned long flags; int nr_bank = 0; @@ -117,9 +116,8 @@ static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector, return false; local_irq_save(flags); - arg = (struct hv_send_ipi_ex **)this_cpu_ptr(hyperv_pcpu_input_arg); + ipi_arg = *this_cpu_ptr(hyperv_pcpu_input_arg); - ipi_arg = *arg; if (unlikely(!ipi_arg)) goto ipi_mask_ex_done; diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c index cc92388b7a99..9b63151bc6cd 100644 --- a/arch/x86/hyperv/ivm.c +++ b/arch/x86/hyperv/ivm.c @@ -246,7 +246,7 @@ EXPORT_SYMBOL_GPL(hv_ghcb_msr_read); static int hv_mark_gpa_visibility(u16 count, const u64 pfn[], enum hv_mem_host_visibility visibility) { - struct hv_gpa_range_for_visibility **input_pcpu, *input; + struct hv_gpa_range_for_visibility *input; u16 pages_processed; u64 hv_status; unsigned long flags; @@ -262,9 +262,8 @@ static int hv_mark_gpa_visibility(u16 count, const u64 pfn[], } local_irq_save(flags); - input_pcpu = (struct hv_gpa_range_for_visibility **) - this_cpu_ptr(hyperv_pcpu_input_arg); - input = *input_pcpu; + input = *this_cpu_ptr(hyperv_pcpu_input_arg); + if (unlikely(!input)) { local_irq_restore(flags); return -EINVAL; diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c index 8460bd35e10c..1cc113200ff5 100644 --- a/arch/x86/hyperv/mmu.c +++ b/arch/x86/hyperv/mmu.c @@ -61,7 +61,6 @@ static void hyperv_flush_tlb_multi(const struct cpumask *cpus, const struct flush_tlb_info *info) { int cpu, vcpu, gva_n, max_gvas; - struct hv_tlb_flush **flush_pcpu; struct hv_tlb_flush *flush; u64 status; unsigned long flags; @@ -74,10 +73,7 @@ static void hyperv_flush_tlb_multi(const struct cpumask *cpus, local_irq_save(flags); - flush_pcpu = (struct hv_tlb_flush **) - this_cpu_ptr(hyperv_pcpu_input_arg); - - flush = *flush_pcpu; + flush = *this_cpu_ptr(hyperv_pcpu_input_arg); if (unlikely(!flush)) { local_irq_restore(flags); @@ -178,17 +174,13 @@ static u64 hyperv_flush_tlb_others_ex(const struct cpumask *cpus, const struct flush_tlb_info *info) { int nr_bank = 0, max_gvas, gva_n; - struct hv_tlb_flush_ex **flush_pcpu; struct hv_tlb_flush_ex *flush; u64 status; if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED)) return HV_STATUS_INVALID_PARAMETER; - flush_pcpu = (struct hv_tlb_flush_ex **) - this_cpu_ptr(hyperv_pcpu_input_arg); - - flush = *flush_pcpu; + flush = *this_cpu_ptr(hyperv_pcpu_input_arg); if (info->mm) { /* diff --git a/arch/x86/hyperv/nested.c b/arch/x86/hyperv/nested.c index 5d70968c8538..9dc259fa322e 100644 --- a/arch/x86/hyperv/nested.c +++ b/arch/x86/hyperv/nested.c @@ -19,7 +19,6 @@ int hyperv_flush_guest_mapping(u64 as) { - struct hv_guest_mapping_flush **flush_pcpu; struct hv_guest_mapping_flush *flush; u64 status; unsigned long flags; @@ -30,10 +29,7 @@ int hyperv_flush_guest_mapping(u64 as) local_irq_save(flags); - flush_pcpu = (struct hv_guest_mapping_flush **) - this_cpu_ptr(hyperv_pcpu_input_arg); - - flush = *flush_pcpu; + flush = *this_cpu_ptr(hyperv_pcpu_input_arg); if (unlikely(!flush)) { local_irq_restore(flags); @@ -90,7 +86,6 @@ EXPORT_SYMBOL_GPL(hyperv_fill_flush_guest_mapping_list); int hyperv_flush_guest_mapping_range(u64 as, hyperv_fill_flush_list_func fill_flush_list_func, void *data) { - struct hv_guest_mapping_flush_list **flush_pcpu; struct hv_guest_mapping_flush_list *flush; u64 status; unsigned long flags; @@ -102,10 +97,8 @@ int hyperv_flush_guest_mapping_range(u64 as, local_irq_save(flags); - flush_pcpu = (struct hv_guest_mapping_flush_list **) - this_cpu_ptr(hyperv_pcpu_input_arg); + flush = *this_cpu_ptr(hyperv_pcpu_input_arg); - flush = *flush_pcpu; if (unlikely(!flush)) { local_irq_restore(flags); goto fault; diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index dffcc894f117..0d7a3ba66396 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -1628,7 +1628,7 @@ static int hv_free_page_report(struct page_reporting_dev_info *pr_dev_info, WARN_ON_ONCE(nents > HV_MEMORY_HINT_MAX_GPA_PAGE_RANGES); WARN_ON_ONCE(sgl->length < (HV_HYP_PAGE_SIZE << page_reporting_order)); local_irq_save(flags); - hint = *(struct hv_memory_hint **)this_cpu_ptr(hyperv_pcpu_input_arg); + hint = *this_cpu_ptr(hyperv_pcpu_input_arg); if (!hint) { local_irq_restore(flags); return -ENOSPC; -- cgit v1.2.3 From 55ad24857341c36616ecc1d9580af5626c226cf1 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Thu, 29 Jun 2023 09:26:20 +0200 Subject: irq-bcm6345-l1: Do not assume a fixed block to cpu mapping MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The irq to block mapping is fixed, and interrupts from the first block will always be routed to the first parent IRQ. But the parent interrupts themselves can be routed to any available CPU. This is used by the bootloader to map the first parent interrupt to the boot CPU, regardless wether the boot CPU is the first one or the second one. When booting from the second CPU, the assumption that the first block's IRQ is mapped to the first CPU breaks, and the system hangs because interrupts do not get routed correctly. Fix this by passing the appropriate bcm6434_l1_cpu to the interrupt handler instead of the chip itself, so the handler always has the right block. Fixes: c7c42ec2baa1 ("irqchips/bmips: Add bcm6345-l1 interrupt controller") Signed-off-by: Jonas Gorski Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Florian Fainelli Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20230629072620.62527-1-jonas.gorski@gmail.com --- drivers/irqchip/irq-bcm6345-l1.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-bcm6345-l1.c b/drivers/irqchip/irq-bcm6345-l1.c index fa113cb2529a..6341c0167c4a 100644 --- a/drivers/irqchip/irq-bcm6345-l1.c +++ b/drivers/irqchip/irq-bcm6345-l1.c @@ -82,6 +82,7 @@ struct bcm6345_l1_chip { }; struct bcm6345_l1_cpu { + struct bcm6345_l1_chip *intc; void __iomem *map_base; unsigned int parent_irq; u32 enable_cache[]; @@ -115,17 +116,11 @@ static inline unsigned int cpu_for_irq(struct bcm6345_l1_chip *intc, static void bcm6345_l1_irq_handle(struct irq_desc *desc) { - struct bcm6345_l1_chip *intc = irq_desc_get_handler_data(desc); - struct bcm6345_l1_cpu *cpu; + struct bcm6345_l1_cpu *cpu = irq_desc_get_handler_data(desc); + struct bcm6345_l1_chip *intc = cpu->intc; struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int idx; -#ifdef CONFIG_SMP - cpu = intc->cpus[cpu_logical_map(smp_processor_id())]; -#else - cpu = intc->cpus[0]; -#endif - chained_irq_enter(chip, desc); for (idx = 0; idx < intc->n_words; idx++) { @@ -253,6 +248,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn, if (!cpu) return -ENOMEM; + cpu->intc = intc; cpu->map_base = ioremap(res.start, sz); if (!cpu->map_base) return -ENOMEM; @@ -271,7 +267,7 @@ static int __init bcm6345_l1_init_one(struct device_node *dn, return -EINVAL; } irq_set_chained_handler_and_data(cpu->parent_irq, - bcm6345_l1_irq_handle, intc); + bcm6345_l1_irq_handle, cpu); return 0; } -- cgit v1.2.3 From 926846a703cbf5d0635cc06e67d34b228746554b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 17 Jun 2023 08:32:42 +0100 Subject: irqchip/gic-v4.1: Properly lock VPEs when doing a directLPI invalidation We normally rely on the irq_to_cpuid_[un]lock() primitives to make sure nothing will change col->idx while performing a LPI invalidation. However, these primitives do not cover VPE doorbells, and we have some open-coded locking for that. Unfortunately, this locking is pretty bogus. Instead, extend the above primitives to cover VPE doorbells and convert the whole thing to it. Fixes: f3a059219bc7 ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access") Reported-by: Kunkun Jiang Signed-off-by: Marc Zyngier Cc: Zenghui Yu Cc: wanghaibin.wang@huawei.com Tested-by: Kunkun Jiang Reviewed-by: Zenghui Yu Link: https://lore.kernel.org/r/20230617073242.3199746-1-maz@kernel.org --- drivers/irqchip/irq-gic-v3-its.c | 75 ++++++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 1994541eaef8..5365bc3b1c49 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -273,13 +273,23 @@ static void vpe_to_cpuid_unlock(struct its_vpe *vpe, unsigned long flags) raw_spin_unlock_irqrestore(&vpe->vpe_lock, flags); } +static struct irq_chip its_vpe_irq_chip; + static int irq_to_cpuid_lock(struct irq_data *d, unsigned long *flags) { - struct its_vlpi_map *map = get_vlpi_map(d); + struct its_vpe *vpe = NULL; int cpu; - if (map) { - cpu = vpe_to_cpuid_lock(map->vpe, flags); + if (d->chip == &its_vpe_irq_chip) { + vpe = irq_data_get_irq_chip_data(d); + } else { + struct its_vlpi_map *map = get_vlpi_map(d); + if (map) + vpe = map->vpe; + } + + if (vpe) { + cpu = vpe_to_cpuid_lock(vpe, flags); } else { /* Physical LPIs are already locked via the irq_desc lock */ struct its_device *its_dev = irq_data_get_irq_chip_data(d); @@ -293,10 +303,18 @@ static int irq_to_cpuid_lock(struct irq_data *d, unsigned long *flags) static void irq_to_cpuid_unlock(struct irq_data *d, unsigned long flags) { - struct its_vlpi_map *map = get_vlpi_map(d); + struct its_vpe *vpe = NULL; + + if (d->chip == &its_vpe_irq_chip) { + vpe = irq_data_get_irq_chip_data(d); + } else { + struct its_vlpi_map *map = get_vlpi_map(d); + if (map) + vpe = map->vpe; + } - if (map) - vpe_to_cpuid_unlock(map->vpe, flags); + if (vpe) + vpe_to_cpuid_unlock(vpe, flags); } static struct its_collection *valid_col(struct its_collection *col) @@ -1433,14 +1451,29 @@ static void wait_for_syncr(void __iomem *rdbase) cpu_relax(); } -static void direct_lpi_inv(struct irq_data *d) +static void __direct_lpi_inv(struct irq_data *d, u64 val) { - struct its_vlpi_map *map = get_vlpi_map(d); void __iomem *rdbase; unsigned long flags; - u64 val; int cpu; + /* Target the redistributor this LPI is currently routed to */ + cpu = irq_to_cpuid_lock(d, &flags); + raw_spin_lock(&gic_data_rdist_cpu(cpu)->rd_lock); + + rdbase = per_cpu_ptr(gic_rdists->rdist, cpu)->rd_base; + gic_write_lpir(val, rdbase + GICR_INVLPIR); + wait_for_syncr(rdbase); + + raw_spin_unlock(&gic_data_rdist_cpu(cpu)->rd_lock); + irq_to_cpuid_unlock(d, flags); +} + +static void direct_lpi_inv(struct irq_data *d) +{ + struct its_vlpi_map *map = get_vlpi_map(d); + u64 val; + if (map) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); @@ -1453,15 +1486,7 @@ static void direct_lpi_inv(struct irq_data *d) val = d->hwirq; } - /* Target the redistributor this LPI is currently routed to */ - cpu = irq_to_cpuid_lock(d, &flags); - raw_spin_lock(&gic_data_rdist_cpu(cpu)->rd_lock); - rdbase = per_cpu_ptr(gic_rdists->rdist, cpu)->rd_base; - gic_write_lpir(val, rdbase + GICR_INVLPIR); - - wait_for_syncr(rdbase); - raw_spin_unlock(&gic_data_rdist_cpu(cpu)->rd_lock); - irq_to_cpuid_unlock(d, flags); + __direct_lpi_inv(d, val); } static void lpi_update_config(struct irq_data *d, u8 clr, u8 set) @@ -3953,18 +3978,10 @@ static void its_vpe_send_inv(struct irq_data *d) { struct its_vpe *vpe = irq_data_get_irq_chip_data(d); - if (gic_rdists->has_direct_lpi) { - void __iomem *rdbase; - - /* Target the redistributor this VPE is currently known on */ - raw_spin_lock(&gic_data_rdist_cpu(vpe->col_idx)->rd_lock); - rdbase = per_cpu_ptr(gic_rdists->rdist, vpe->col_idx)->rd_base; - gic_write_lpir(d->parent_data->hwirq, rdbase + GICR_INVLPIR); - wait_for_syncr(rdbase); - raw_spin_unlock(&gic_data_rdist_cpu(vpe->col_idx)->rd_lock); - } else { + if (gic_rdists->has_direct_lpi) + __direct_lpi_inv(d, d->parent_data->hwirq); + else its_vpe_send_cmd(vpe, its_send_inv); - } } static void its_vpe_mask_irq(struct irq_data *d) -- cgit v1.2.3 From 567f67acac94e7bbc4cb4b71ff9773555d02609a Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Mon, 3 Jul 2023 18:41:29 +0200 Subject: irqchip/gic-v3: Enable Rockchip 3588001 erratum workaround for RK3588S Commit a8707f553884 ("irqchip/gic-v3: Add Rockchip 3588001 erratum workaround") mentioned RK3588S (the slimmed down variant of RK3588) being affected, but did not check for its compatible value. Thus the quirk is not applied on RK3588S. Since the GIC ITS node got added to the upstream DT, boards using RK3588S are no longer booting without this quirk being applied. Fixes: 06cdac8e8407 ("arm64: dts: rockchip: add GIC ITS support to rk3588") Signed-off-by: Sebastian Reichel Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20230703164129.193991-1-sebastian.reichel@collabora.com --- drivers/irqchip/irq-gic-v3-its.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 5365bc3b1c49..e0c2b10d154d 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -4744,7 +4744,8 @@ static bool __maybe_unused its_enable_rk3588001(void *data) { struct its_node *its = data; - if (!of_machine_is_compatible("rockchip,rk3588")) + if (!of_machine_is_compatible("rockchip,rk3588") && + !of_machine_is_compatible("rockchip,rk3588s")) return false; its->flags |= ITS_FLAGS_FORCE_NON_SHAREABLE; -- cgit v1.2.3 From d1478aea649e739a0a0e4890cd8b049ae5d08c13 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 29 Jun 2023 18:01:32 +0200 Subject: memory: tegra: Add dummy implementation on Tegra194 With the introduction of commit 9365bf006f53 ("PCI: tegra194: Add interconnect support in Tegra234"), the PCI driver on Tegra194 and later requires an interconnect provider. However, a provider is currently only exposed on Tegra234 and this causes PCI on Tegra194 to defer probe indefinitely. Fix this by adding a dummy implementation on Tegra194. This allows nodes to be provided to interconnect consumers, but doesn't do any bandwidth accounting or frequency scaling. Fixes: 9365bf006f53 ("PCI: tegra194: Add interconnect support in Tegra234") Reported-by: Jon Hunter Signed-off-by: Thierry Reding Reviewed-by: Sumit Gupta Tested-by: Sumit Gupta Link: https://lore.kernel.org/r/20230629160132.768940-1-thierry.reding@gmail.com Signed-off-by: Krzysztof Kozlowski --- drivers/memory/tegra/mc.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/memory/tegra/tegra194.c | 1 + drivers/memory/tegra/tegra234.c | 23 +---------------------- include/soc/tegra/mc.h | 3 +++ 4 files changed, 42 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/memory/tegra/mc.c b/drivers/memory/tegra/mc.c index 4a750da1c12a..deb6e65b59af 100644 --- a/drivers/memory/tegra/mc.c +++ b/drivers/memory/tegra/mc.c @@ -755,6 +755,43 @@ const char *const tegra_mc_error_names[8] = { [6] = "SMMU translation error", }; +struct icc_node *tegra_mc_icc_xlate(struct of_phandle_args *spec, void *data) +{ + struct tegra_mc *mc = icc_provider_to_tegra_mc(data); + struct icc_node *node; + + list_for_each_entry(node, &mc->provider.nodes, node_list) { + if (node->id == spec->args[0]) + return node; + } + + /* + * If a client driver calls devm_of_icc_get() before the MC driver + * is probed, then return EPROBE_DEFER to the client driver. + */ + return ERR_PTR(-EPROBE_DEFER); +} + +static int tegra_mc_icc_get(struct icc_node *node, u32 *average, u32 *peak) +{ + *average = 0; + *peak = 0; + + return 0; +} + +static int tegra_mc_icc_set(struct icc_node *src, struct icc_node *dst) +{ + return 0; +} + +const struct tegra_mc_icc_ops tegra_mc_icc_ops = { + .xlate = tegra_mc_icc_xlate, + .aggregate = icc_std_aggregate, + .get_bw = tegra_mc_icc_get, + .set = tegra_mc_icc_set, +}; + /* * Memory Controller (MC) has few Memory Clients that are issuing memory * bandwidth allocation requests to the MC interconnect provider. The MC diff --git a/drivers/memory/tegra/tegra194.c b/drivers/memory/tegra/tegra194.c index b2416ee3ac26..26035ac3a1eb 100644 --- a/drivers/memory/tegra/tegra194.c +++ b/drivers/memory/tegra/tegra194.c @@ -1355,6 +1355,7 @@ const struct tegra_mc_soc tegra194_mc_soc = { MC_INT_SECURITY_VIOLATION | MC_INT_DECERR_EMEM, .has_addr_hi_reg = true, .ops = &tegra186_mc_ops, + .icc_ops = &tegra_mc_icc_ops, .ch_intmask = 0x00000f00, .global_intstatus_channel_shift = 8, }; diff --git a/drivers/memory/tegra/tegra234.c b/drivers/memory/tegra/tegra234.c index 8e873a7bc34f..4469430aa5fb 100644 --- a/drivers/memory/tegra/tegra234.c +++ b/drivers/memory/tegra/tegra234.c @@ -889,27 +889,6 @@ static int tegra234_mc_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, return 0; } -static struct icc_node* -tegra234_mc_of_icc_xlate(struct of_phandle_args *spec, void *data) -{ - struct tegra_mc *mc = icc_provider_to_tegra_mc(data); - unsigned int cl_id = spec->args[0]; - struct icc_node *node; - - list_for_each_entry(node, &mc->provider.nodes, node_list) { - if (node->id != cl_id) - continue; - - return node; - } - - /* - * If a client driver calls devm_of_icc_get() before the MC driver - * is probed, then return EPROBE_DEFER to the client driver. - */ - return ERR_PTR(-EPROBE_DEFER); -} - static int tegra234_mc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *peak) { *avg = 0; @@ -919,7 +898,7 @@ static int tegra234_mc_icc_get_init_bw(struct icc_node *node, u32 *avg, u32 *pea } static const struct tegra_mc_icc_ops tegra234_mc_icc_ops = { - .xlate = tegra234_mc_of_icc_xlate, + .xlate = tegra_mc_icc_xlate, .aggregate = tegra234_mc_icc_aggregate, .get_bw = tegra234_mc_icc_get_init_bw, .set = tegra234_mc_icc_set, diff --git a/include/soc/tegra/mc.h b/include/soc/tegra/mc.h index fc3001483e62..a5ef84944a06 100644 --- a/include/soc/tegra/mc.h +++ b/include/soc/tegra/mc.h @@ -175,6 +175,9 @@ struct tegra_mc_icc_ops { int (*get_bw)(struct icc_node *node, u32 *avg, u32 *peak); }; +struct icc_node *tegra_mc_icc_xlate(struct of_phandle_args *spec, void *data); +extern const struct tegra_mc_icc_ops tegra_mc_icc_ops; + struct tegra_mc_ops { /* * @probe: Callback to set up SoC-specific bits of the memory controller. This is called -- cgit v1.2.3 From 7e08baf6a89c8758050a3593aedc949f44fe3413 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 7 Jul 2023 21:58:52 +0800 Subject: of: make OF_EARLY_FLATTREE depend on HAS_IOMEM On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. In LKP error report at below on s390: ------ ld: kernel/dma/coherent.o: in function `dma_init_coherent_memory': coherent.c:(.text+0x102): undefined reference to `memremap' ld: coherent.c:(.text+0x226): undefined reference to `memunmap' ld: kernel/dma/coherent.o: in function `dma_declare_coherent_memory': coherent.c:(.text+0x8b8): undefined reference to `memunmap' ld: kernel/dma/coherent.o: in function `dma_release_coherent_memory': coherent.c:(.text+0x9aa): undefined reference to `memunmap' ------ In the config file, several Kconfig options are: ------ '# CONFIG_PCI is not set' CONFIG_OF_EARLY_FLATTREE=y CONFIG_DMA_DECLARE_COHERENT=y ------ So, enabling OF_EARLY_FLATTREE will select DMA_DECLARE_COHERENT and cause above building errors even though they are not needed because CONFIG_PCI is disabled. Here let OF_EARLY_FLATTREE depend on HAS_IOMEM so that it won't be built to cause compiling error if PCI is unset. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He Cc: Rob Herring Cc: Frank Rowand Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20230707135852.24292-9-bhe@redhat.com Signed-off-by: Rob Herring --- drivers/of/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index e40f10bf2ba4..da9826accb1b 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -55,7 +55,7 @@ config OF_FLATTREE config OF_EARLY_FLATTREE bool - select DMA_DECLARE_COHERENT if HAS_DMA + select DMA_DECLARE_COHERENT if HAS_DMA && HAS_IOMEM select OF_FLATTREE config OF_PROMTREE -- cgit v1.2.3 From 4e47382fbca916d7db95cbf9e2d7ca2e9d1ca3fe Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Wed, 28 Jun 2023 15:24:37 +0200 Subject: fbdev: imxfb: warn about invalid left/right margin Warn about invalid var->left_margin or var->right_margin. Their values are read from the device tree. We store var->left_margin-3 and var->right_margin-1 in register fields. These fields should be >= 0. Fixes: 7e8549bcee00 ("imxfb: Fix margin settings") Signed-off-by: Martin Kaiser Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index adf36690c342..5fbcb78a9cae 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -613,10 +613,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf if (var->hsync_len < 1 || var->hsync_len > 64) printk(KERN_ERR "%s: invalid hsync_len %d\n", info->fix.id, var->hsync_len); - if (var->left_margin > 255) + if (var->left_margin < 3 || var->left_margin > 255) printk(KERN_ERR "%s: invalid left_margin %d\n", info->fix.id, var->left_margin); - if (var->right_margin > 255) + if (var->right_margin < 1 || var->right_margin > 255) printk(KERN_ERR "%s: invalid right_margin %d\n", info->fix.id, var->right_margin); if (var->yres < 1 || var->yres > ymax_mask) -- cgit v1.2.3 From 86a101023e7d4413f89d0a0a77693af952529260 Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Wed, 28 Jun 2023 15:26:52 +0200 Subject: fbdev: imxfb: switch to DEFINE_SIMPLE_DEV_PM_OPS SIMPLE_DEV_PM_OPS is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS and use pm_sleep_ptr for setting the driver's pm routines. We can now remove the __maybe_unused qualifier in the suspend and resume functions. Signed-off-by: Martin Kaiser Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 5fbcb78a9cae..04f3bf30a529 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -1066,7 +1066,7 @@ static void imxfb_remove(struct platform_device *pdev) framebuffer_release(info); } -static int __maybe_unused imxfb_suspend(struct device *dev) +static int imxfb_suspend(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct imxfb_info *fbi = info->par; @@ -1076,7 +1076,7 @@ static int __maybe_unused imxfb_suspend(struct device *dev) return 0; } -static int __maybe_unused imxfb_resume(struct device *dev) +static int imxfb_resume(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct imxfb_info *fbi = info->par; @@ -1086,13 +1086,13 @@ static int __maybe_unused imxfb_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(imxfb_pm_ops, imxfb_suspend, imxfb_resume); static struct platform_driver imxfb_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = imxfb_of_dev_id, - .pm = &imxfb_pm_ops, + .pm = pm_sleep_ptr(&imxfb_pm_ops), }, .probe = imxfb_probe, .remove_new = imxfb_remove, -- cgit v1.2.3 From 45fcc058a75bf5d65cf4c32da44a252fbe873cd4 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Mon, 10 Jul 2023 21:19:58 +0800 Subject: fbdev: imxfb: Removed unneeded release_mem_region Remove unnecessary release_mem_region from the error path to prevent mem region from being released twice, which could avoid resource leak or other unexpected issues. Fixes: b083c22d5114 ("video: fbdev: imxfb: Convert request_mem_region + ioremap to devm_ioremap_resource") Signed-off-by: Yangtao Li Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 04f3bf30a529..385c4715c7b7 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -1043,7 +1043,6 @@ failed_cmap: failed_map: failed_ioremap: failed_getclock: - release_mem_region(res->start, resource_size(res)); failed_of_parse: kfree(info->pseudo_palette); failed_init: -- cgit v1.2.3 From 55dd7378ba94afe389e7edec23510bad80d344ca Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Mon, 10 Jul 2023 21:19:59 +0800 Subject: fbdev: imxfb: Convert to devm_kmalloc_array() No need for manual kfree in the error path and the remove function. Signed-off-by: Yangtao Li Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 385c4715c7b7..7020b5f6434d 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -673,7 +673,8 @@ static int imxfb_init_fbinfo(struct platform_device *pdev) pr_debug("%s\n",__func__); - info->pseudo_palette = kmalloc_array(16, sizeof(u32), GFP_KERNEL); + info->pseudo_palette = devm_kmalloc_array(&pdev->dev, 16, + sizeof(u32), GFP_KERNEL); if (!info->pseudo_palette) return -ENOMEM; @@ -1044,7 +1045,6 @@ failed_map: failed_ioremap: failed_getclock: failed_of_parse: - kfree(info->pseudo_palette); failed_init: framebuffer_release(info); return ret; @@ -1061,7 +1061,6 @@ static void imxfb_remove(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap); dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer, fbi->map_dma); - kfree(info->pseudo_palette); framebuffer_release(info); } -- cgit v1.2.3 From 78dd4f415567a94fa134214f82b7966cbefde05c Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Mon, 10 Jul 2023 21:20:00 +0800 Subject: fbdev: imxfb: Convert to devm_platform_ioremap_resource() Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 7020b5f6434d..4582ea801121 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -869,7 +869,6 @@ static int imxfb_probe(struct platform_device *pdev) struct imxfb_info *fbi; struct lcd_device *lcd; struct fb_info *info; - struct resource *res; struct imx_fb_videomode *m; const struct of_device_id *of_id; struct device_node *display_np; @@ -886,10 +885,6 @@ static int imxfb_probe(struct platform_device *pdev) if (of_id) pdev->id_entry = of_id->data; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); if (!info) return -ENOMEM; @@ -971,7 +966,7 @@ static int imxfb_probe(struct platform_device *pdev) goto failed_getclock; } - fbi->regs = devm_ioremap_resource(&pdev->dev, res); + fbi->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(fbi->regs)) { ret = PTR_ERR(fbi->regs); goto failed_ioremap; -- cgit v1.2.3 From 53a90ae81a33437ff6ae907c75fd8a9902df2480 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Mon, 10 Jul 2023 21:20:01 +0800 Subject: fbdev: imxfb: remove unneeded labels These labels are now redundant and don't do anything, let's remove them. Signed-off-by: Yangtao Li Signed-off-by: Helge Deller --- drivers/video/fbdev/imxfb.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/imxfb.c b/drivers/video/fbdev/imxfb.c index 4582ea801121..77dedd2c05fd 100644 --- a/drivers/video/fbdev/imxfb.c +++ b/drivers/video/fbdev/imxfb.c @@ -903,7 +903,7 @@ static int imxfb_probe(struct platform_device *pdev) if (!display_np) { dev_err(&pdev->dev, "No display defined in devicetree\n"); ret = -EINVAL; - goto failed_of_parse; + goto failed_init; } /* @@ -917,13 +917,13 @@ static int imxfb_probe(struct platform_device *pdev) if (!fbi->mode) { ret = -ENOMEM; of_node_put(display_np); - goto failed_of_parse; + goto failed_init; } ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode); of_node_put(display_np); if (ret) - goto failed_of_parse; + goto failed_init; /* Calculate maximum bytes used per pixel. In most cases this should * be the same as m->bpp/8 */ @@ -936,7 +936,7 @@ static int imxfb_probe(struct platform_device *pdev) fbi->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); if (IS_ERR(fbi->clk_ipg)) { ret = PTR_ERR(fbi->clk_ipg); - goto failed_getclock; + goto failed_init; } /* @@ -951,25 +951,25 @@ static int imxfb_probe(struct platform_device *pdev) */ ret = clk_prepare_enable(fbi->clk_ipg); if (ret) - goto failed_getclock; + goto failed_init; clk_disable_unprepare(fbi->clk_ipg); fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); if (IS_ERR(fbi->clk_ahb)) { ret = PTR_ERR(fbi->clk_ahb); - goto failed_getclock; + goto failed_init; } fbi->clk_per = devm_clk_get(&pdev->dev, "per"); if (IS_ERR(fbi->clk_per)) { ret = PTR_ERR(fbi->clk_per); - goto failed_getclock; + goto failed_init; } fbi->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(fbi->regs)) { ret = PTR_ERR(fbi->regs); - goto failed_ioremap; + goto failed_init; } fbi->map_size = PAGE_ALIGN(info->fix.smem_len); @@ -978,7 +978,7 @@ static int imxfb_probe(struct platform_device *pdev) if (!info->screen_buffer) { dev_err(&pdev->dev, "Failed to allocate video RAM\n"); ret = -ENOMEM; - goto failed_map; + goto failed_init; } info->fix.smem_start = fbi->map_dma; @@ -1030,16 +1030,11 @@ static int imxfb_probe(struct platform_device *pdev) failed_lcd: unregister_framebuffer(info); - failed_register: fb_dealloc_cmap(&info->cmap); failed_cmap: dma_free_wc(&pdev->dev, fbi->map_size, info->screen_buffer, fbi->map_dma); -failed_map: -failed_ioremap: -failed_getclock: -failed_of_parse: failed_init: framebuffer_release(info); return ret; -- cgit v1.2.3 From 6fe5c68ee6a1aae0ef291a56001e7888de547fa2 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Tue, 4 Jul 2023 17:50:34 +0200 Subject: irqchip/gic-v3: Workaround for GIC-700 erratum 2941627 GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake requests when SPIs are deactivated while targeting a sleeping CPU - ie a CPU for which the redistributor: GICR_WAKER.ProcessorSleep == 1 This runtime situation can happen if an SPI that has been activated on a core is retargeted to a different core, it becomes pending and the target core subsequently enters a power state quiescing the respective redistributor. When this situation is hit, the de-activation carried out on the core that activated the SPI (through either ICC_EOIR1_EL1 or ICC_DIR_EL1 register writes) does not trigger a wake requests for the sleeping GIC redistributor even if the SPI is pending. Work around the erratum by de-activating the SPI using the redistributor GICD_ICACTIVER register if the runtime conditions require it (ie the IRQ was retargeted between activation and de-activation). Signed-off-by: Lorenzo Pieralisi Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20230704155034.148262-1-lpieralisi@kernel.org --- Documentation/arm64/silicon-errata.rst | 3 ++ drivers/irqchip/irq-gic-v3.c | 62 +++++++++++++++++++++++++++++++++- 2 files changed, 64 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index d6430ade349d..0d55d58c645c 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -141,6 +141,9 @@ stable kernels. | ARM | MMU-500 | #841119,826419 | N/A | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | GIC-700 | #2941627 | ARM64_ERRATUM_2941627 | ++----------------+-----------------+-----------------+-----------------------------+ ++----------------+-----------------+-----------------+-----------------------------+ | Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 | +----------------+-----------------+-----------------+-----------------------------+ | Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_843419 | diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 0c6c1af9a5b7..eedfa8e9f077 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -69,6 +69,8 @@ struct gic_chip_data { static void __iomem *t241_dist_base_alias[T241_CHIPS_MAX] __read_mostly; static DEFINE_STATIC_KEY_FALSE(gic_nvidia_t241_erratum); +static DEFINE_STATIC_KEY_FALSE(gic_arm64_2941627_erratum); + static struct gic_chip_data gic_data __read_mostly; static DEFINE_STATIC_KEY_TRUE(supports_deactivate_key); @@ -592,10 +594,39 @@ static void gic_irq_nmi_teardown(struct irq_data *d) gic_irq_set_prio(d, GICD_INT_DEF_PRI); } +static bool gic_arm64_erratum_2941627_needed(struct irq_data *d) +{ + enum gic_intid_range range; + + if (!static_branch_unlikely(&gic_arm64_2941627_erratum)) + return false; + + range = get_intid_range(d); + + /* + * The workaround is needed if the IRQ is an SPI and + * the target cpu is different from the one we are + * executing on. + */ + return (range == SPI_RANGE || range == ESPI_RANGE) && + !cpumask_test_cpu(raw_smp_processor_id(), + irq_data_get_effective_affinity_mask(d)); +} + static void gic_eoi_irq(struct irq_data *d) { write_gicreg(gic_irq(d), ICC_EOIR1_EL1); isb(); + + if (gic_arm64_erratum_2941627_needed(d)) { + /* + * Make sure the GIC stream deactivate packet + * issued by ICC_EOIR1_EL1 has completed before + * deactivating through GICD_IACTIVER. + */ + dsb(sy); + gic_poke_irq(d, GICD_ICACTIVER); + } } static void gic_eoimode1_eoi_irq(struct irq_data *d) @@ -606,7 +637,11 @@ static void gic_eoimode1_eoi_irq(struct irq_data *d) */ if (gic_irq(d) >= 8192 || irqd_is_forwarded_to_vcpu(d)) return; - gic_write_dir(gic_irq(d)); + + if (!gic_arm64_erratum_2941627_needed(d)) + gic_write_dir(gic_irq(d)); + else + gic_poke_irq(d, GICD_ICACTIVER); } static int gic_set_type(struct irq_data *d, unsigned int type) @@ -1816,6 +1851,12 @@ static bool gic_enable_quirk_asr8601(void *data) return true; } +static bool gic_enable_quirk_arm64_2941627(void *data) +{ + static_branch_enable(&gic_arm64_2941627_erratum); + return true; +} + static const struct gic_quirk gic_quirks[] = { { .desc = "GICv3: Qualcomm MSM8996 broken firmware", @@ -1863,6 +1904,25 @@ static const struct gic_quirk gic_quirks[] = { .mask = 0xffffffff, .init = gic_enable_quirk_nvidia_t241, }, + { + /* + * GIC-700: 2941627 workaround - IP variant [0,1] + * + */ + .desc = "GICv3: ARM64 erratum 2941627", + .iidr = 0x0400043b, + .mask = 0xff0e0fff, + .init = gic_enable_quirk_arm64_2941627, + }, + { + /* + * GIC-700: 2941627 workaround - IP variant [2] + */ + .desc = "GICv3: ARM64 erratum 2941627", + .iidr = 0x0402043b, + .mask = 0xff0f0fff, + .init = gic_enable_quirk_arm64_2941627, + }, { } }; -- cgit v1.2.3 From 6e2acbfe59b83043bc7ae1bb39fac4fc9dcd5a18 Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Wed, 5 Jul 2023 00:54:04 +0300 Subject: clk: meson: change usleep_range() to udelay() for atomic context The function meson_clk_pll_enable() can be invoked under the enable_lock spinlock from the clk core logic, which risks a kernel panic during the usleep_range() call: BUG: scheduling while atomic: kworker/u4:2/36/0x00000002 Modules linked in: g_ffs usb_f_fs libcomposite CPU: 1 PID: 36 Comm: kworker/u4:2 Not tainted 6.4.0-rc5 #273 Workqueue: events_unbound async_run_entry_fn Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 __schedule_bug+0x58/0x78 __schedule+0x828/0xa88 schedule+0x64/0xd8 schedule_hrtimeout_range_clock+0xd0/0x208 schedule_hrtimeout_range+0x1c/0x30 usleep_range_state+0x6c/0xa8 meson_clk_pll_enable+0x1f4/0x310 clk_core_enable+0x78/0x200 clk_core_enable+0x58/0x200 clk_core_enable+0x58/0x200 clk_core_enable+0x58/0x200 clk_enable+0x34/0x60 So it is required to use the udelay() function instead of usleep_range() for the atomic context safety. Fixes: b6ec400aa153 ("clk: meson: introduce new pll power-on sequence for A1 SoC family") Reported-by: Jan Dakinevich Signed-off-by: Dmitry Rokosov Link: https://lore.kernel.org/r/20230704215404.11533-1-ddrokosov@sberdevices.ru Signed-off-by: Jerome Brunet --- drivers/clk/meson/clk-pll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index 8fef90bf962f..6fa7639a3050 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -367,9 +367,9 @@ static int meson_clk_pll_enable(struct clk_hw *hw) * 3. enable the lock detect module */ if (MESON_PARM_APPLICABLE(&pll->current_en)) { - usleep_range(10, 20); + udelay(10); meson_parm_write(clk->map, &pll->current_en, 1); - usleep_range(40, 50); + udelay(40); } if (MESON_PARM_APPLICABLE(&pll->l_detect)) { -- cgit v1.2.3 From d8630f050d3fd2079f8617dd6c00c6509109c755 Mon Sep 17 00:00:00 2001 From: Mike Tipton Date: Fri, 23 Jun 2023 14:50:42 +0200 Subject: interconnect: qcom: Add support for mask-based BCMs Some BCMs aren't directly associated with the data path (i.e. ACV) and therefore don't communicate using BW. Instead, they are simply enabled/disabled with a simple bit mask. Add support for these. Origin commit retrieved from: https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/commit/2d1573e0206998151b342e6b52a4c0f7234d7e36 Signed-off-by: Mike Tipton [narmstrong: removed copyright change from original commit] Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-1-709474b151cc@linaro.org Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver") Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/bcm-voter.c | 5 +++++ drivers/interconnect/qcom/icc-rpmh.h | 2 ++ 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c index 8f385f9c2dd3..d5f2a6b5376b 100644 --- a/drivers/interconnect/qcom/bcm-voter.c +++ b/drivers/interconnect/qcom/bcm-voter.c @@ -83,6 +83,11 @@ static void bcm_aggregate(struct qcom_icc_bcm *bcm) temp = agg_peak[bucket] * bcm->vote_scale; bcm->vote_y[bucket] = bcm_div(temp, bcm->aux_data.unit); + + if (bcm->enable_mask && (bcm->vote_x[bucket] || bcm->vote_y[bucket])) { + bcm->vote_x[bucket] = 0; + bcm->vote_y[bucket] = bcm->enable_mask; + } } if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 && diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h index 04391c1ba465..7843d8864d6b 100644 --- a/drivers/interconnect/qcom/icc-rpmh.h +++ b/drivers/interconnect/qcom/icc-rpmh.h @@ -81,6 +81,7 @@ struct qcom_icc_node { * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm * @vote_scale: scaling factor for vote_x and vote_y + * @enable_mask: optional mask to send as vote instead of vote_x/vote_y * @dirty: flag used to indicate whether the bcm needs to be committed * @keepalive: flag used to indicate whether a keepalive is required * @aux_data: auxiliary data used when calculating threshold values and @@ -97,6 +98,7 @@ struct qcom_icc_bcm { u64 vote_x[QCOM_ICC_NUM_BUCKETS]; u64 vote_y[QCOM_ICC_NUM_BUCKETS]; u64 vote_scale; + u32 enable_mask; bool dirty; bool keepalive; struct bcm_db aux_data; -- cgit v1.2.3 From be02db24cf840bc0fdfbecc78ad803619dd143e6 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 23 Jun 2023 14:50:43 +0200 Subject: interconnect: qcom: sm8450: add enable_mask for bcm nodes Set the proper enable_mask to nodes requiring such value to be used instead of a bandwidth when voting. The masks were copied from the downstream implementation at [1]. [1] https://git.codelinaro.org/clo/la/kernel/msm-5.10/-/blob/KERNEL.PLATFORM.1.0.r2-05600-WAIPIOLE.0/drivers/interconnect/qcom/waipio.c Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-2-709474b151cc@linaro.org Fixes: fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver") Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sm8450.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c index 2d7a8e7b85ec..e64c214b4020 100644 --- a/drivers/interconnect/qcom/sm8450.c +++ b/drivers/interconnect/qcom/sm8450.c @@ -1337,6 +1337,7 @@ static struct qcom_icc_node qns_mem_noc_sf_disp = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = 0x8, .num_nodes = 1, .nodes = { &ebi }, }; @@ -1349,6 +1350,7 @@ static struct qcom_icc_bcm bcm_ce0 = { static struct qcom_icc_bcm bcm_cn0 = { .name = "CN0", + .enable_mask = 0x1, .keepalive = true, .num_nodes = 55, .nodes = { &qnm_gemnoc_cnoc, &qnm_gemnoc_pcie, @@ -1383,6 +1385,7 @@ static struct qcom_icc_bcm bcm_cn0 = { static struct qcom_icc_bcm bcm_co0 = { .name = "CO0", + .enable_mask = 0x1, .num_nodes = 2, .nodes = { &qxm_nsp, &qns_nsp_gemnoc }, }; @@ -1403,6 +1406,7 @@ static struct qcom_icc_bcm bcm_mm0 = { static struct qcom_icc_bcm bcm_mm1 = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 12, .nodes = { &qnm_camnoc_hf, &qnm_camnoc_icp, &qnm_camnoc_sf, &qnm_mdp, @@ -1445,6 +1449,7 @@ static struct qcom_icc_bcm bcm_sh0 = { static struct qcom_icc_bcm bcm_sh1 = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 7, .nodes = { &alm_gpu_tcu, &alm_sys_tcu, &qnm_nsp_gemnoc, &qnm_pcie, @@ -1461,6 +1466,7 @@ static struct qcom_icc_bcm bcm_sn0 = { static struct qcom_icc_bcm bcm_sn1 = { .name = "SN1", + .enable_mask = 0x1, .num_nodes = 4, .nodes = { &qhm_gic, &qxm_pimem, &xm_gic, &qns_gemnoc_gc }, @@ -1492,6 +1498,7 @@ static struct qcom_icc_bcm bcm_sn7 = { static struct qcom_icc_bcm bcm_acv_disp = { .name = "ACV", + .enable_mask = 0x1, .num_nodes = 1, .nodes = { &ebi_disp }, }; @@ -1510,6 +1517,7 @@ static struct qcom_icc_bcm bcm_mm0_disp = { static struct qcom_icc_bcm bcm_mm1_disp = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 3, .nodes = { &qnm_mdp_disp, &qnm_rot_disp, &qns_mem_noc_sf_disp }, @@ -1523,6 +1531,7 @@ static struct qcom_icc_bcm bcm_sh0_disp = { static struct qcom_icc_bcm bcm_sh1_disp = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 1, .nodes = { &qnm_pcie_disp }, }; -- cgit v1.2.3 From 0dc82bd9e4627065dbc6ac8468296aa18f13c840 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 23 Jun 2023 14:50:44 +0200 Subject: interconnect: qcom: sm8550: add enable_mask for bcm nodes Set the proper enable_mask to nodes requiring such value to be used instead of a bandwidth when voting. The masks were copied from the downstream implementation at [1]. [1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r1-rel/drivers/interconnect/qcom/kalama.c Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-3-709474b151cc@linaro.org Fixes: e6f0d6a30f73 ("interconnect: qcom: Add SM8550 interconnect provider driver") Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sm8550.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sm8550.c b/drivers/interconnect/qcom/sm8550.c index d823ba988ef6..0864ed285375 100644 --- a/drivers/interconnect/qcom/sm8550.c +++ b/drivers/interconnect/qcom/sm8550.c @@ -1473,6 +1473,7 @@ static struct qcom_icc_node qns_mem_noc_sf_cam_ife_2 = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = 0x8, .num_nodes = 1, .nodes = { &ebi }, }; @@ -1485,6 +1486,7 @@ static struct qcom_icc_bcm bcm_ce0 = { static struct qcom_icc_bcm bcm_cn0 = { .name = "CN0", + .enable_mask = 0x1, .keepalive = true, .num_nodes = 54, .nodes = { &qsm_cfg, &qhs_ahb2phy0, @@ -1524,6 +1526,7 @@ static struct qcom_icc_bcm bcm_cn1 = { static struct qcom_icc_bcm bcm_co0 = { .name = "CO0", + .enable_mask = 0x1, .num_nodes = 2, .nodes = { &qxm_nsp, &qns_nsp_gemnoc }, }; @@ -1549,6 +1552,7 @@ static struct qcom_icc_bcm bcm_mm0 = { static struct qcom_icc_bcm bcm_mm1 = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 8, .nodes = { &qnm_camnoc_hf, &qnm_camnoc_icp, &qnm_camnoc_sf, &qnm_vapss_hcp, @@ -1589,6 +1593,7 @@ static struct qcom_icc_bcm bcm_sh0 = { static struct qcom_icc_bcm bcm_sh1 = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 13, .nodes = { &alm_gpu_tcu, &alm_sys_tcu, &chm_apps, &qnm_gpu, @@ -1608,6 +1613,7 @@ static struct qcom_icc_bcm bcm_sn0 = { static struct qcom_icc_bcm bcm_sn1 = { .name = "SN1", + .enable_mask = 0x1, .num_nodes = 3, .nodes = { &qhm_gic, &xm_gic, &qns_gemnoc_gc }, @@ -1633,6 +1639,7 @@ static struct qcom_icc_bcm bcm_sn7 = { static struct qcom_icc_bcm bcm_acv_disp = { .name = "ACV", + .enable_mask = 0x1, .num_nodes = 1, .nodes = { &ebi_disp }, }; @@ -1657,12 +1664,14 @@ static struct qcom_icc_bcm bcm_sh0_disp = { static struct qcom_icc_bcm bcm_sh1_disp = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 2, .nodes = { &qnm_mnoc_hf_disp, &qnm_pcie_disp }, }; static struct qcom_icc_bcm bcm_acv_cam_ife_0 = { .name = "ACV", + .enable_mask = 0x0, .num_nodes = 1, .nodes = { &ebi_cam_ife_0 }, }; @@ -1681,6 +1690,7 @@ static struct qcom_icc_bcm bcm_mm0_cam_ife_0 = { static struct qcom_icc_bcm bcm_mm1_cam_ife_0 = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 4, .nodes = { &qnm_camnoc_hf_cam_ife_0, &qnm_camnoc_icp_cam_ife_0, &qnm_camnoc_sf_cam_ife_0, &qns_mem_noc_sf_cam_ife_0 }, @@ -1694,6 +1704,7 @@ static struct qcom_icc_bcm bcm_sh0_cam_ife_0 = { static struct qcom_icc_bcm bcm_sh1_cam_ife_0 = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 3, .nodes = { &qnm_mnoc_hf_cam_ife_0, &qnm_mnoc_sf_cam_ife_0, &qnm_pcie_cam_ife_0 }, @@ -1701,6 +1712,7 @@ static struct qcom_icc_bcm bcm_sh1_cam_ife_0 = { static struct qcom_icc_bcm bcm_acv_cam_ife_1 = { .name = "ACV", + .enable_mask = 0x0, .num_nodes = 1, .nodes = { &ebi_cam_ife_1 }, }; @@ -1719,6 +1731,7 @@ static struct qcom_icc_bcm bcm_mm0_cam_ife_1 = { static struct qcom_icc_bcm bcm_mm1_cam_ife_1 = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 4, .nodes = { &qnm_camnoc_hf_cam_ife_1, &qnm_camnoc_icp_cam_ife_1, &qnm_camnoc_sf_cam_ife_1, &qns_mem_noc_sf_cam_ife_1 }, @@ -1732,6 +1745,7 @@ static struct qcom_icc_bcm bcm_sh0_cam_ife_1 = { static struct qcom_icc_bcm bcm_sh1_cam_ife_1 = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 3, .nodes = { &qnm_mnoc_hf_cam_ife_1, &qnm_mnoc_sf_cam_ife_1, &qnm_pcie_cam_ife_1 }, @@ -1739,6 +1753,7 @@ static struct qcom_icc_bcm bcm_sh1_cam_ife_1 = { static struct qcom_icc_bcm bcm_acv_cam_ife_2 = { .name = "ACV", + .enable_mask = 0x0, .num_nodes = 1, .nodes = { &ebi_cam_ife_2 }, }; @@ -1757,6 +1772,7 @@ static struct qcom_icc_bcm bcm_mm0_cam_ife_2 = { static struct qcom_icc_bcm bcm_mm1_cam_ife_2 = { .name = "MM1", + .enable_mask = 0x1, .num_nodes = 4, .nodes = { &qnm_camnoc_hf_cam_ife_2, &qnm_camnoc_icp_cam_ife_2, &qnm_camnoc_sf_cam_ife_2, &qns_mem_noc_sf_cam_ife_2 }, @@ -1770,6 +1786,7 @@ static struct qcom_icc_bcm bcm_sh0_cam_ife_2 = { static struct qcom_icc_bcm bcm_sh1_cam_ife_2 = { .name = "SH1", + .enable_mask = 0x1, .num_nodes = 3, .nodes = { &qnm_mnoc_hf_cam_ife_2, &qnm_mnoc_sf_cam_ife_2, &qnm_pcie_cam_ife_2 }, -- cgit v1.2.3 From 3cb11fe244d516f757c1022cfa971528d525fe65 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 23 Jun 2023 14:50:45 +0200 Subject: interconnect: qcom: sa8775p: add enable_mask for bcm nodes Set the proper enable_mask the ACV node requiring such value to be used instead of a bandwidth when voting. The masks was copied from the downstream implementation at [1]. [1] https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/blob/kernel.lnx.5.15.r32-rel/drivers/interconnect/qcom/lemans.c Signed-off-by: Neil Armstrong Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230619-topic-sm8550-upstream-interconnect-mask-vote-v2-4-709474b151cc@linaro.org Fixes: 3655a63f9661 ("interconnect: qcom: add a driver for sa8775p") Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/sa8775p.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/sa8775p.c b/drivers/interconnect/qcom/sa8775p.c index da21cc31a580..f56538669de0 100644 --- a/drivers/interconnect/qcom/sa8775p.c +++ b/drivers/interconnect/qcom/sa8775p.c @@ -1873,6 +1873,7 @@ static struct qcom_icc_node srvc_snoc = { static struct qcom_icc_bcm bcm_acv = { .name = "ACV", + .enable_mask = 0x8, .num_nodes = 1, .nodes = { &ebi }, }; -- cgit v1.2.3 From 0bb8f49cd2cc8cb32ac51189ff9fcbe7ec3d9d65 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Mon, 10 Jul 2023 11:40:07 -0600 Subject: of: Preserve "of-display" device name for compatibility MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 241d2fb56a18 ("of: Make OF framebuffer device names unique"), as spotted by Frédéric Bonnard, the historical "of-display" device is gone: the updated logic creates "of-display.0" instead, then as many "of-display.N" as required. This means that offb no longer finds the expected device, which prevents the Debian Installer from setting up its interface, at least on ppc64el. Fix this by keeping "of-display" for the first device and "of-display.N" for subsequent devices. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217328 Link: https://bugs.debian.org/1033058 Fixes: 241d2fb56a18 ("of: Make OF framebuffer device names unique") Cc: stable@vger.kernel.org Cc: Cyril Brulebois Cc: Thomas Zimmermann Cc: Helge Deller Acked-by: Helge Deller Acked-by: Thomas Zimmermann Reviewed-by: Michal Suchánek Link: https://lore.kernel.org/r/20230710174007.2291013-1-robh@kernel.org Signed-off-by: Rob Herring --- drivers/of/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 051e29b7ad2b..0c3475e7d2ff 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -552,7 +552,7 @@ static int __init of_platform_default_populate_init(void) if (!of_get_property(node, "linux,opened", NULL) || !of_get_property(node, "linux,boot-display", NULL)) continue; - dev = of_platform_device_create(node, "of-display.0", NULL); + dev = of_platform_device_create(node, "of-display", NULL); of_node_put(node); if (WARN_ON(!dev)) return -ENOMEM; -- cgit v1.2.3 From 8544cda94dae6be3f1359539079c68bb731428b1 Mon Sep 17 00:00:00 2001 From: Olivier Maignial Date: Fri, 23 Jun 2023 17:33:36 +0200 Subject: mtd: spinand: toshiba: Fix ecc_get_status Reading ECC status is failing. tx58cxgxsxraix_ecc_get_status() is using on-stack buffer for SPINAND_GET_FEATURE_OP() output. It is not suitable for DMA needs of spi-mem. Fix this by using the spi-mem operations dedicated buffer spinand->scratchbuf. See spinand->scratchbuf: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418 spi_mem_check_op(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199 Fixes: 10949af1681d ("mtd: spinand: Add initial support for Toshiba TC58CVG2S0H") Cc: stable@vger.kernel.org Signed-off-by: Olivier Maignial Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032553D05FBE36DEE0D311EFE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM --- drivers/mtd/nand/spi/toshiba.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c index 7380b1ebaccd..a80427c13121 100644 --- a/drivers/mtd/nand/spi/toshiba.c +++ b/drivers/mtd/nand/spi/toshiba.c @@ -73,7 +73,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, { struct nand_device *nand = spinand_to_nand(spinand); u8 mbf = 0; - struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf); + struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, spinand->scratchbuf); switch (status & STATUS_ECC_MASK) { case STATUS_ECC_NO_BITFLIPS: @@ -92,7 +92,7 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand, if (spi_mem_exec_op(spinand->spimem, &op)) return nanddev_get_ecc_conf(nand)->strength; - mbf >>= 4; + mbf = *(spinand->scratchbuf) >> 4; if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf)) return nanddev_get_ecc_conf(nand)->strength; -- cgit v1.2.3 From f5a05060670a4d8d6523afc7963eb559c2e3615f Mon Sep 17 00:00:00 2001 From: Olivier Maignial Date: Fri, 23 Jun 2023 17:33:37 +0200 Subject: mtd: spinand: winbond: Fix ecc_get_status Reading ECC status is failing. w25n02kv_ecc_get_status() is using on-stack buffer for SPINAND_GET_FEATURE_OP() output. It is not suitable for DMA needs of spi-mem. Fix this by using the spi-mem operations dedicated buffer spinand->scratchbuf. See spinand->scratchbuf: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418 spi_mem_check_op(): https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199 Fixes: 6154c7a58348 ("mtd: spinand: winbond: add Winbond W25N02KV flash support") Cc: stable@vger.kernel.org Signed-off-by: Olivier Maignial Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032EDB9E36B764A33769039FE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM --- drivers/mtd/nand/spi/winbond.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index 3ad58cd284d8..f507e3759301 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -108,7 +108,7 @@ static int w25n02kv_ecc_get_status(struct spinand_device *spinand, { struct nand_device *nand = spinand_to_nand(spinand); u8 mbf = 0; - struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf); + struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, spinand->scratchbuf); switch (status & STATUS_ECC_MASK) { case STATUS_ECC_NO_BITFLIPS: @@ -126,7 +126,7 @@ static int w25n02kv_ecc_get_status(struct spinand_device *spinand, if (spi_mem_exec_op(spinand->spimem, &op)) return nanddev_get_ecc_conf(nand)->strength; - mbf >>= 4; + mbf = *(spinand->scratchbuf) >> 4; if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf)) return nanddev_get_ecc_conf(nand)->strength; -- cgit v1.2.3 From d8403b9eeee66d5dd81ecb9445800b108c267ce3 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Sun, 25 Jun 2023 00:10:21 +0530 Subject: mtd: rawnand: omap_elm: Fix incorrect type in assignment Once the ECC word endianness is converted to BE32, we force cast it to u32 so we can use elm_write_reg() which in turn uses writel(). Fixes below sparse warnings: drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:180:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:185:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: expected unsigned int [usertype] val drivers/mtd/nand/raw/omap_elm.c:190:37: sparse: got restricted __be32 [usertype] >> drivers/mtd/nand/raw/omap_elm.c:200:40: sparse: sparse: restricted __be32 degrades to integer drivers/mtd/nand/raw/omap_elm.c:206:39: sparse: sparse: restricted __be32 degrades to integer drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:210:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:213:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:216:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:219:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:222:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: expected unsigned int [assigned] [usertype] val drivers/mtd/nand/raw/omap_elm.c:225:37: sparse: got restricted __be32 [usertype] drivers/mtd/nand/raw/omap_elm.c:228:39: sparse: sparse: restricted __be32 degrades to integer Fixes: bf22433575ef ("mtd: devices: elm: Add support for ELM error correction") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202306212211.WDXokuWh-lkp@intel.com/ Signed-off-by: Roger Quadros Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20230624184021.7740-1-rogerq@kernel.org --- drivers/mtd/nand/raw/omap_elm.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/omap_elm.c b/drivers/mtd/nand/raw/omap_elm.c index 6e1eac6644a6..4a97d4a76454 100644 --- a/drivers/mtd/nand/raw/omap_elm.c +++ b/drivers/mtd/nand/raw/omap_elm.c @@ -177,17 +177,17 @@ static void elm_load_syndrome(struct elm_info *info, switch (info->bch_type) { case BCH8_ECC: /* syndrome fragment 0 = ecc[9-12B] */ - val = cpu_to_be32(*(u32 *) &ecc[9]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[9]); elm_write_reg(info, offset, val); /* syndrome fragment 1 = ecc[5-8B] */ offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[5]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[5]); elm_write_reg(info, offset, val); /* syndrome fragment 2 = ecc[1-4B] */ offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[1]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[1]); elm_write_reg(info, offset, val); /* syndrome fragment 3 = ecc[0B] */ @@ -197,35 +197,35 @@ static void elm_load_syndrome(struct elm_info *info, break; case BCH4_ECC: /* syndrome fragment 0 = ecc[20-52b] bits */ - val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) | + val = ((__force u32)cpu_to_be32(*(u32 *)&ecc[3]) >> 4) | ((ecc[2] & 0xf) << 28); elm_write_reg(info, offset, val); /* syndrome fragment 1 = ecc[0-20b] bits */ offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12; + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[0]) >> 12; elm_write_reg(info, offset, val); break; case BCH16_ECC: - val = cpu_to_be32(*(u32 *) &ecc[22]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[22]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[18]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[18]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[14]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[14]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[10]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[10]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[6]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[6]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[2]); + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[2]); elm_write_reg(info, offset, val); offset += 4; - val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16; + val = (__force u32)cpu_to_be32(*(u32 *)&ecc[0]) >> 16; elm_write_reg(info, offset, val); break; default: -- cgit v1.2.3 From 7e6b04f9238eab0f684fafd158c1f32ea65b9eaa Mon Sep 17 00:00:00 2001 From: Arseniy Krasnov Date: Wed, 5 Jul 2023 09:52:10 +0300 Subject: mtd: rawnand: meson: fix OOB available bytes for ECC It is incorrect to calculate number of OOB bytes for ECC engine using some "already known" ECC step size (1024 bytes here). Number of such bytes for ECC engine must be whole OOB except 2 bytes for bad block marker, while proper ECC step size and strength will be selected by ECC logic. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: Signed-off-by: Arseniy Krasnov Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20230705065211.293500-1-AVKrasnov@sberdevices.ru --- drivers/mtd/nand/raw/meson_nand.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index d3faf8086631..b10011dec1e6 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -1278,7 +1278,6 @@ static int meson_nand_attach_chip(struct nand_chip *nand) struct meson_nfc *nfc = nand_get_controller_data(nand); struct meson_nfc_nand_chip *meson_chip = to_meson_nand(nand); struct mtd_info *mtd = nand_to_mtd(nand); - int nsectors = mtd->writesize / 1024; int raw_writesize; int ret; @@ -1304,7 +1303,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand) nand->options |= NAND_NO_SUBPAGE_WRITE; ret = nand_ecc_choose_conf(nand, nfc->data->ecc_caps, - mtd->oobsize - 2 * nsectors); + mtd->oobsize - 2); if (ret) { dev_err(nfc->dev, "failed to ECC init\n"); return -EINVAL; -- cgit v1.2.3 From d64b1ee12a168030fbb3e0aebf7bce49e9a07589 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 29 Jun 2023 09:07:37 +0300 Subject: RDMA/mlx4: Make check for invalid flags stricter This code is trying to ensure that only the flags specified in the list are allowed. The problem is that ucmd->rx_hash_fields_mask is a u64 and the flags are an enum which is treated as a u32 in this context. That means the test doesn't check whether the highest 32 bits are zero. Fixes: 4d02ebd9bbbd ("IB/mlx4: Fix RSS hash fields restrictions") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/mlx4/qp.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 456656617c33..9d08aa99f3cb 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -565,15 +565,15 @@ static int set_qp_rss(struct mlx4_ib_dev *dev, struct mlx4_ib_rss *rss_ctx, return (-EOPNOTSUPP); } - if (ucmd->rx_hash_fields_mask & ~(MLX4_IB_RX_HASH_SRC_IPV4 | - MLX4_IB_RX_HASH_DST_IPV4 | - MLX4_IB_RX_HASH_SRC_IPV6 | - MLX4_IB_RX_HASH_DST_IPV6 | - MLX4_IB_RX_HASH_SRC_PORT_TCP | - MLX4_IB_RX_HASH_DST_PORT_TCP | - MLX4_IB_RX_HASH_SRC_PORT_UDP | - MLX4_IB_RX_HASH_DST_PORT_UDP | - MLX4_IB_RX_HASH_INNER)) { + if (ucmd->rx_hash_fields_mask & ~(u64)(MLX4_IB_RX_HASH_SRC_IPV4 | + MLX4_IB_RX_HASH_DST_IPV4 | + MLX4_IB_RX_HASH_SRC_IPV6 | + MLX4_IB_RX_HASH_DST_IPV6 | + MLX4_IB_RX_HASH_SRC_PORT_TCP | + MLX4_IB_RX_HASH_DST_PORT_TCP | + MLX4_IB_RX_HASH_SRC_PORT_UDP | + MLX4_IB_RX_HASH_DST_PORT_UDP | + MLX4_IB_RX_HASH_INNER)) { pr_debug("RX Hash fields_mask has unsupported mask (0x%llx)\n", ucmd->rx_hash_fields_mask); return (-EOPNOTSUPP); -- cgit v1.2.3 From b1e213a9e31c20206f111ec664afcf31cbfe0dbb Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 7 Jul 2023 21:58:45 +0800 Subject: idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset. -------- ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined! ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined! -------- Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He Cc: Vinod Koul Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20230707135852.24292-2-bhe@redhat.com Signed-off-by: Vinod Koul --- drivers/dma/Kconfig | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 644c188d6a11..08fdd0e2ed1b 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -211,6 +211,7 @@ config FSL_DMA config FSL_EDMA tristate "Freescale eDMA engine support" depends on OF + depends on HAS_IOMEM select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help @@ -280,6 +281,7 @@ config IMX_SDMA config INTEL_IDMA64 tristate "Intel integrated DMA 64-bit support" + depends on HAS_IOMEM select DMA_ENGINE select DMA_VIRTUAL_CHANNELS help -- cgit v1.2.3 From a68b48afc050a9456ed4ed19d8755e0f925b44e6 Mon Sep 17 00:00:00 2001 From: Minjie Du Date: Wed, 5 Jul 2023 19:39:12 +0800 Subject: dmaengine: xilinx: xdma: Fix Judgment of the return value Fix: make IS_ERR() judge the devm_ioremap_resource() function return. Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver") Signed-off-by: Minjie Du Acked-by: Michal Simek Link: https://lore.kernel.org/r/20230705113912.16247-1-duminjie@vivo.com Signed-off-by: Vinod Koul --- drivers/dma/xilinx/xdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c index 93ee298d52b8..ad5ff63354cf 100644 --- a/drivers/dma/xilinx/xdma.c +++ b/drivers/dma/xilinx/xdma.c @@ -892,7 +892,7 @@ static int xdma_probe(struct platform_device *pdev) } reg_base = devm_ioremap_resource(&pdev->dev, res); - if (!reg_base) { + if (IS_ERR(reg_base)) { xdma_err(xdev, "ioremap failed"); goto failed; } -- cgit v1.2.3 From 5782017cc4d0c8f3425d55b893675bb8a20c33e9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Jul 2023 09:13:25 +0300 Subject: phy: phy-mtk-dp: Fix an error code in probe() Negative -EINVAL was intended instead of positive EINVAL. Fixes: 6a23afad443a ("phy: phy-mtk-dp: Add driver for DP phy") Signed-off-by: Dan Carpenter Reviewed-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/3c699e00-2883-40d9-92c3-0da1dc38fdd4@moroto.mountain Signed-off-by: Vinod Koul --- drivers/phy/mediatek/phy-mtk-dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c index 232fd3f1ff1b..d7024a144335 100644 --- a/drivers/phy/mediatek/phy-mtk-dp.c +++ b/drivers/phy/mediatek/phy-mtk-dp.c @@ -169,7 +169,7 @@ static int mtk_dp_phy_probe(struct platform_device *pdev) regs = *(struct regmap **)dev->platform_data; if (!regs) - return dev_err_probe(dev, EINVAL, + return dev_err_probe(dev, -EINVAL, "No data passed, requires struct regmap**\n"); dp_phy = devm_kzalloc(dev, sizeof(*dp_phy), GFP_KERNEL); -- cgit v1.2.3 From 95bd315f0a5ed7d7afe771776272c5b3cdb29bc8 Mon Sep 17 00:00:00 2001 From: Guillaume Ranquet Date: Tue, 30 May 2023 10:43:07 +0200 Subject: phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test The pll prediv calculus searchs for the smallest prediv that gets the ns_hdmipll_ck in the range of 5 GHz to 12 GHz. A typo in the upper bound test was testing for 5Ghz to 1Ghz Fixes: 45810d486bb44 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195") Signed-off-by: Guillaume Ranquet Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230529-hdmi_phy_fix-v1-1-bf65f53af533@baylibre.com Signed-off-by: Vinod Koul --- drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c index 8aa7251de4a9..bbfe11d6a69d 100644 --- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c @@ -253,7 +253,7 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw, for (i = 0; i < ARRAY_SIZE(txpredivs); i++) { ns_hdmipll_ck = 5 * tmds_clk * txposdiv * txpredivs[i]; if (ns_hdmipll_ck >= 5 * GIGA && - ns_hdmipll_ck <= 1 * GIGA) + ns_hdmipll_ck <= 12 * GIGA) break; } if (i == (ARRAY_SIZE(txpredivs) - 1) && -- cgit v1.2.3 From 45d89a344eb46db9dce851c28e14f5e3c635c251 Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Thu, 29 Jun 2023 10:45:38 -0400 Subject: phy: qcom-snps-femto-v2: keep cfg_ahb_clk enabled during runtime suspend In the dwc3 core, both system and runtime suspend end up calling dwc3_suspend_common(). From there, what happens for the PHYs depends on the USB mode and whether the controller is entering system or runtime suspend. HOST mode: (1) system suspend on a non-wakeup-capable controller The [1] if branch is taken. dwc3_core_exit() is called, which ends up calling phy_power_off() and phy_exit(). Those two functions decrease the PM runtime count at some point, so they will trigger the PHY runtime sleep (assuming the count is right). (2) runtime suspend / system suspend on a wakeup-capable controller The [1] branch is not taken. dwc3_suspend_common() calls phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY runtime suspend op is called. DEVICE mode: dwc3_core_exit() is called on both runtime and system sleep unless the controller is already runtime suspended. OTG mode: (1) system suspend : dwc3_core_exit() is called (2) runtime suspend : do nothing In host mode, the code seems to make a distinction between 1) runtime sleep / system sleep for wakeup-capable controller, and 2) system sleep for non-wakeup-capable controller, where phy_power_off() and phy_exit() are only called for the latter. This suggests the PHY is not supposed to be in a fully powered-off state for runtime sleep and system sleep for wakeup-capable controller. Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend. The clocks are disabled by phy->set_suspend() [2] which is only called in the system sleep path through dwc3_core_exit() [3]. With that in mind, don't disable the clocks during the femto PHY runtime suspend callback. The clocks will only be disabled during system suspend for non-wakeup-capable controllers, through dwc3_core_exit(). [1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988 [2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524 [3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915 Signed-off-by: Adrien Thierry Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 6c237f3cc66d..3335480fc395 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -165,22 +165,13 @@ static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy) 0, USB2_AUTO_RESUME); } - clk_disable_unprepare(hsphy->cfg_ahb_clk); return 0; } static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy) { - int ret; - dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n"); - ret = clk_prepare_enable(hsphy->cfg_ahb_clk); - if (ret) { - dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n"); - return ret; - } - return 0; } -- cgit v1.2.3 From 8a0eb8f9b9a002291a3934acfd913660b905249e Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Thu, 29 Jun 2023 10:45:39 -0400 Subject: phy: qcom-snps-femto-v2: properly enable ref clock The driver is not enabling the ref clock, which thus gets disabled by the clk_disable_unused() initcall. This leads to the dwc3 controller failing to initialize if probed after clk_disable_unused() is called, for instance when the driver is built as a module. To fix this, switch to the clk_bulk API to handle both cfg_ahb and ref clocks at the proper places. Note that the cfg_ahb clock is currently not used by any device tree instantiation of the PHY. Work needs to be done separately to fix this. Link: https://lore.kernel.org/linux-arm-msm/ZEqvy+khHeTkC2hf@fedora/ Fixes: 51e8114f80d0 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs") Signed-off-by: Adrien Thierry Link: https://lore.kernel.org/r/20230629144542.14906-3-athierry@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 63 ++++++++++++++++++++------- 1 file changed, 48 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 3335480fc395..6170f8fd118e 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -110,11 +110,13 @@ struct phy_override_seq { /** * struct qcom_snps_hsphy - snps hs phy attributes * + * @dev: device structure + * * @phy: generic phy * @base: iomapped memory space for snps hs phy * - * @cfg_ahb_clk: AHB2PHY interface clock - * @ref_clk: phy reference clock + * @num_clks: number of clocks + * @clks: array of clocks * @phy_reset: phy reset control * @vregs: regulator supplies bulk data * @phy_initialized: if PHY has been initialized correctly @@ -122,11 +124,13 @@ struct phy_override_seq { * @update_seq_cfg: tuning parameters for phy init */ struct qcom_snps_hsphy { + struct device *dev; + struct phy *phy; void __iomem *base; - struct clk *cfg_ahb_clk; - struct clk *ref_clk; + int num_clks; + struct clk_bulk_data *clks; struct reset_control *phy_reset; struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS]; @@ -135,6 +139,34 @@ struct qcom_snps_hsphy { struct phy_override_seq update_seq_cfg[NUM_HSPHY_TUNING_PARAMS]; }; +static int qcom_snps_hsphy_clk_init(struct qcom_snps_hsphy *hsphy) +{ + struct device *dev = hsphy->dev; + + hsphy->num_clks = 2; + hsphy->clks = devm_kcalloc(dev, hsphy->num_clks, sizeof(*hsphy->clks), GFP_KERNEL); + if (!hsphy->clks) + return -ENOMEM; + + /* + * TODO: Currently no device tree instantiation of the PHY is using the clock. + * This needs to be fixed in order for this code to be able to use devm_clk_bulk_get(). + */ + hsphy->clks[0].id = "cfg_ahb"; + hsphy->clks[0].clk = devm_clk_get_optional(dev, "cfg_ahb"); + if (IS_ERR(hsphy->clks[0].clk)) + return dev_err_probe(dev, PTR_ERR(hsphy->clks[0].clk), + "failed to get cfg_ahb clk\n"); + + hsphy->clks[1].id = "ref"; + hsphy->clks[1].clk = devm_clk_get(dev, "ref"); + if (IS_ERR(hsphy->clks[1].clk)) + return dev_err_probe(dev, PTR_ERR(hsphy->clks[1].clk), + "failed to get ref clk\n"); + + return 0; +} + static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, u32 mask, u32 val) { @@ -365,16 +397,16 @@ static int qcom_snps_hsphy_init(struct phy *phy) if (ret) return ret; - ret = clk_prepare_enable(hsphy->cfg_ahb_clk); + ret = clk_bulk_prepare_enable(hsphy->num_clks, hsphy->clks); if (ret) { - dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + dev_err(&phy->dev, "failed to enable clocks, %d\n", ret); goto poweroff_phy; } ret = reset_control_assert(hsphy->phy_reset); if (ret) { dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); - goto disable_ahb_clk; + goto disable_clks; } usleep_range(100, 150); @@ -382,7 +414,7 @@ static int qcom_snps_hsphy_init(struct phy *phy) ret = reset_control_deassert(hsphy->phy_reset); if (ret) { dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); - goto disable_ahb_clk; + goto disable_clks; } qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, @@ -439,8 +471,8 @@ static int qcom_snps_hsphy_init(struct phy *phy) return 0; -disable_ahb_clk: - clk_disable_unprepare(hsphy->cfg_ahb_clk); +disable_clks: + clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks); poweroff_phy: regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); @@ -452,7 +484,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy) struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); reset_control_assert(hsphy->phy_reset); - clk_disable_unprepare(hsphy->cfg_ahb_clk); + clk_bulk_disable_unprepare(hsphy->num_clks, hsphy->clks); regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); hsphy->phy_initialized = false; @@ -545,14 +577,15 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev) if (!hsphy) return -ENOMEM; + hsphy->dev = dev; + hsphy->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(hsphy->base)) return PTR_ERR(hsphy->base); - hsphy->ref_clk = devm_clk_get(dev, "ref"); - if (IS_ERR(hsphy->ref_clk)) - return dev_err_probe(dev, PTR_ERR(hsphy->ref_clk), - "failed to get ref clk\n"); + ret = qcom_snps_hsphy_clk_init(hsphy); + if (ret) + return dev_err_probe(dev, ret, "failed to initialize clocks\n"); hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(hsphy->phy_reset)) { -- cgit v1.2.3 From 8932089b566c24ea19b57e37704c492678de1420 Mon Sep 17 00:00:00 2001 From: Adrien Thierry Date: Thu, 29 Jun 2023 10:45:40 -0400 Subject: phy: qcom-snps-femto-v2: use qcom_snps_hsphy_suspend/resume error code The return value from qcom_snps_hsphy_suspend/resume is not used. Make sure qcom_snps_hsphy_runtime_suspend/resume return this value as well. Signed-off-by: Adrien Thierry Link: https://lore.kernel.org/r/20230629144542.14906-4-athierry@redhat.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 6170f8fd118e..d0319bee01c0 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -214,8 +214,7 @@ static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev) if (!hsphy->phy_initialized) return 0; - qcom_snps_hsphy_suspend(hsphy); - return 0; + return qcom_snps_hsphy_suspend(hsphy); } static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev) @@ -225,8 +224,7 @@ static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev) if (!hsphy->phy_initialized) return 0; - qcom_snps_hsphy_resume(hsphy); - return 0; + return qcom_snps_hsphy_resume(hsphy); } static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode, -- cgit v1.2.3 From c40d6b3249b11d60e09d81530588f56233d9aa44 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 5 Jul 2023 14:30:11 +0200 Subject: soundwire: fix enumeration completion The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling") Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling") Cc: stable@vger.kernel.org # 5.7 Cc: Pierre-Louis Bossart Cc: Rander Wang Signed-off-by: Johan Hovold Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul --- drivers/soundwire/bus.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index dba920ec88f6..cf78839b3f74 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -922,8 +922,8 @@ static void sdw_modify_slave_status(struct sdw_slave *slave, "initializing enumeration and init completion for Slave %d\n", slave->dev_num); - init_completion(&slave->enumeration_complete); - init_completion(&slave->initialization_complete); + reinit_completion(&slave->enumeration_complete); + reinit_completion(&slave->initialization_complete); } else if ((status == SDW_SLAVE_ATTACHED) && (slave->status == SDW_SLAVE_UNATTACHED)) { @@ -931,7 +931,7 @@ static void sdw_modify_slave_status(struct sdw_slave *slave, "signaling enumeration completion for Slave %d\n", slave->dev_num); - complete(&slave->enumeration_complete); + complete_all(&slave->enumeration_complete); } slave->status = status; mutex_unlock(&bus->bus_lock); @@ -1951,7 +1951,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus, "signaling initialization completion for Slave %d\n", slave->dev_num); - complete(&slave->initialization_complete); + complete_all(&slave->initialization_complete); /* * If the manager became pm_runtime active, the peripherals will be -- cgit v1.2.3 From f84d41b2a083b990cbdf70f3b24b6b108b9678ad Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 25 May 2023 14:38:09 +0100 Subject: soundwire: qcom: update status correctly with mask SoundWire device status can be incorrectly updated without proper mask, fix this by adding a mask before updating the status. Fixes: c7d49c76d1d5 ("soundwire: qcom: add support to new interrupts") Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul --- drivers/soundwire/qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 7970fdb27ba0..c029e4d53573 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -540,7 +540,7 @@ static int qcom_swrm_get_alert_slave_dev_num(struct qcom_swrm_ctrl *ctrl) status = (val >> (dev_num * SWRM_MCP_SLV_STATUS_SZ)); if ((status & SWRM_MCP_SLV_STATUS_MASK) == SDW_SLAVE_ALERT) { - ctrl->status[dev_num] = status; + ctrl->status[dev_num] = status & SWRM_MCP_SLV_STATUS_MASK; return dev_num; } } -- cgit v1.2.3 From 7891d0a5ce6f627132d3068ba925cf86f29008b1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 27 Jun 2023 08:42:10 +0300 Subject: soundwire: amd: Fix a check for errors in probe() This code has two problems: 1) The devm_ioremap() function returns NULL, not error pointers. 2) It's checking the wrong variable. ->mmio instead of ->acp_mmio. Fixes: d8f48fbdfd9a ("soundwire: amd: Add support for AMD Manager driver") Suggested-by: "Mukunda,Vijendar" Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/9863b2bf-0de2-4bf8-8f09-fe24dc5c63ff@moroto.mountain Signed-off-by: Vinod Koul --- drivers/soundwire/amd_manager.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/soundwire/amd_manager.c b/drivers/soundwire/amd_manager.c index 08aeb7ed00e1..3a99f6dcdfaf 100644 --- a/drivers/soundwire/amd_manager.c +++ b/drivers/soundwire/amd_manager.c @@ -910,9 +910,9 @@ static int amd_sdw_manager_probe(struct platform_device *pdev) return -ENOMEM; amd_manager->acp_mmio = devm_ioremap(dev, res->start, resource_size(res)); - if (IS_ERR(amd_manager->mmio)) { + if (!amd_manager->acp_mmio) { dev_err(dev, "mmio not found\n"); - return PTR_ERR(amd_manager->mmio); + return -ENOMEM; } amd_manager->instance = pdata->instance; amd_manager->mmio = amd_manager->acp_mmio + -- cgit v1.2.3 From d44263222134b5635932974c6177a5cba65a07e8 Mon Sep 17 00:00:00 2001 From: Sergei Antonov Date: Tue, 27 Jun 2023 15:05:49 +0300 Subject: mmc: moxart: read scr register without changing byte order Conversion from big-endian to native is done in a common function mmc_app_send_scr(). Converting in moxart_transfer_pio() is extra. Double conversion on a LE system returns an incorrect SCR value, leads to errors: mmc0: unrecognised SCR structure version 8 Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov Cc: Jonas Jensen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230627120549.2400325-1-saproj@gmail.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/moxart-mmc.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index 2d002c81dcf3..d0d6ffcf78d4 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -338,13 +338,7 @@ static void moxart_transfer_pio(struct moxart_host *host) return; } for (len = 0; len < remain && len < host->fifo_width;) { - /* SCR data must be read in big endian. */ - if (data->mrq->cmd->opcode == SD_APP_SEND_SCR) - *sgp = ioread32be(host->base + - REG_DATA_WINDOW); - else - *sgp = ioread32(host->base + - REG_DATA_WINDOW); + *sgp = ioread32(host->base + REG_DATA_WINDOW); sgp++; len += 4; } -- cgit v1.2.3 From c2a88e8bdf5f6239948d75283d0ae7e0c7945b03 Mon Sep 17 00:00:00 2001 From: Jocelyn Falempe Date: Tue, 11 Jul 2023 11:20:43 +0200 Subject: drm/client: Fix memory leak in drm_client_target_cloned dmt_mode is allocated and never freed in this function. It was found with the ast driver, but most drivers using generic fbdev setup are probably affected. This fixes the following kmemleak report: backtrace: [<00000000b391296d>] drm_mode_duplicate+0x45/0x220 [drm] [<00000000e45bb5b3>] drm_client_target_cloned.constprop.0+0x27b/0x480 [drm] [<00000000ed2d3a37>] drm_client_modeset_probe+0x6bd/0xf50 [drm] [<0000000010e5cc9d>] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper] [<00000000909f82ca>] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper] [<00000000063a69aa>] drm_client_register+0x169/0x240 [drm] [<00000000a8c61525>] ast_pci_probe+0x142/0x190 [ast] [<00000000987f19bb>] local_pci_probe+0xdc/0x180 [<000000004fca231b>] work_for_cpu_fn+0x4e/0xa0 [<0000000000b85301>] process_one_work+0x8b7/0x1540 [<000000003375b17c>] worker_thread+0x70a/0xed0 [<00000000b0d43cd9>] kthread+0x29f/0x340 [<000000008d770833>] ret_from_fork+0x1f/0x30 unreferenced object 0xff11000333089a00 (size 128): cc: Fixes: 1d42bbc8f7f9 ("drm/fbdev: fix cloning on fbcon") Reported-by: Zhang Yi Signed-off-by: Jocelyn Falempe Reviewed-by: Javier Martinez Canillas Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230711092203.68157-2-jfalempe@redhat.com --- drivers/gpu/drm/drm_client_modeset.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c index 1b12a3c201a3..a4a62aa99984 100644 --- a/drivers/gpu/drm/drm_client_modeset.c +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -311,6 +311,9 @@ static bool drm_client_target_cloned(struct drm_device *dev, can_clone = true; dmt_mode = drm_mode_find_dmt(dev, 1024, 768, 60, false); + if (!dmt_mode) + goto fail; + for (i = 0; i < connector_count; i++) { if (!enabled[i]) continue; @@ -326,11 +329,13 @@ static bool drm_client_target_cloned(struct drm_device *dev, if (!modes[i]) can_clone = false; } + kfree(dmt_mode); if (can_clone) { DRM_DEBUG_KMS("can clone using 1024x768\n"); return true; } +fail: DRM_INFO("kms: can't enable cloning when we probably wanted to.\n"); return false; } -- cgit v1.2.3 From 2329cc7a101af1a844fbf706c0724c0baea38365 Mon Sep 17 00:00:00 2001 From: Jocelyn Falempe Date: Tue, 11 Jul 2023 11:20:44 +0200 Subject: drm/client: Fix memory leak in drm_client_modeset_probe When a new mode is set to modeset->mode, the previous mode should be freed. This fixes the following kmemleak report: drm_mode_duplicate+0x45/0x220 [drm] drm_client_modeset_probe+0x944/0xf50 [drm] __drm_fb_helper_initial_config_and_unlock+0xb4/0x2c0 [drm_kms_helper] drm_fbdev_client_hotplug+0x2bc/0x4d0 [drm_kms_helper] drm_client_register+0x169/0x240 [drm] ast_pci_probe+0x142/0x190 [ast] local_pci_probe+0xdc/0x180 work_for_cpu_fn+0x4e/0xa0 process_one_work+0x8b7/0x1540 worker_thread+0x70a/0xed0 kthread+0x29f/0x340 ret_from_fork+0x1f/0x30 cc: Reported-by: Zhang Yi Signed-off-by: Jocelyn Falempe Reviewed-by: Javier Martinez Canillas Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230711092203.68157-3-jfalempe@redhat.com --- drivers/gpu/drm/drm_client_modeset.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c index a4a62aa99984..871e4e2129d6 100644 --- a/drivers/gpu/drm/drm_client_modeset.c +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -867,6 +867,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, break; } + kfree(modeset->mode); modeset->mode = drm_mode_duplicate(dev, mode); drm_connector_get(connector); modeset->connectors[modeset->num_connectors++] = connector; -- cgit v1.2.3 From a85c238c5ccd64f8d4c4560702c65cb25dee791c Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 12 Jul 2023 15:11:39 +0300 Subject: drm/msm/mdss: correct UBWC programming for SM8550 The SM8550 platform employs newer UBWC decoder, which requires slightly different programming. Fixes: a2f33995c19d ("drm/msm: mdss: add support for SM8550") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/546934/ Link: https://lore.kernel.org/r/20230712121145.1994830-3-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/msm_mdss.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c index 05648c910c68..798bd4f3b662 100644 --- a/drivers/gpu/drm/msm/msm_mdss.c +++ b/drivers/gpu/drm/msm/msm_mdss.c @@ -189,6 +189,7 @@ static int _msm_mdss_irq_domain_add(struct msm_mdss *msm_mdss) #define UBWC_2_0 0x20000000 #define UBWC_3_0 0x30000000 #define UBWC_4_0 0x40000000 +#define UBWC_4_3 0x40030000 static void msm_mdss_setup_ubwc_dec_20(struct msm_mdss *msm_mdss) { @@ -227,7 +228,10 @@ static void msm_mdss_setup_ubwc_dec_40(struct msm_mdss *msm_mdss) writel_relaxed(1, msm_mdss->mmio + UBWC_CTRL_2); writel_relaxed(0, msm_mdss->mmio + UBWC_PREDICTION_MODE); } else { - writel_relaxed(2, msm_mdss->mmio + UBWC_CTRL_2); + if (data->ubwc_dec_version == UBWC_4_3) + writel_relaxed(3, msm_mdss->mmio + UBWC_CTRL_2); + else + writel_relaxed(2, msm_mdss->mmio + UBWC_CTRL_2); writel_relaxed(1, msm_mdss->mmio + UBWC_PREDICTION_MODE); } } @@ -271,6 +275,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss) msm_mdss_setup_ubwc_dec_30(msm_mdss); break; case UBWC_4_0: + case UBWC_4_3: msm_mdss_setup_ubwc_dec_40(msm_mdss); break; default: @@ -569,6 +574,16 @@ static const struct msm_mdss_data sm8250_data = { .macrotile_mode = 1, }; +static const struct msm_mdss_data sm8550_data = { + .ubwc_version = UBWC_4_0, + .ubwc_dec_version = UBWC_4_3, + .ubwc_swizzle = 6, + .ubwc_static = 1, + /* TODO: highest_bank_bit = 2 for LP_DDR4 */ + .highest_bank_bit = 3, + .macrotile_mode = 1, +}; + static const struct of_device_id mdss_dt_match[] = { { .compatible = "qcom,mdss" }, { .compatible = "qcom,msm8998-mdss" }, @@ -585,7 +600,7 @@ static const struct of_device_id mdss_dt_match[] = { { .compatible = "qcom,sm8250-mdss", .data = &sm8250_data }, { .compatible = "qcom,sm8350-mdss", .data = &sm8250_data }, { .compatible = "qcom,sm8450-mdss", .data = &sm8250_data }, - { .compatible = "qcom,sm8550-mdss", .data = &sm8250_data }, + { .compatible = "qcom,sm8550-mdss", .data = &sm8550_data }, {} }; MODULE_DEVICE_TABLE(of, mdss_dt_match); -- cgit v1.2.3 From ba7a94ea73120e3f72c4a9b7ed6fd5598d29c069 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Tue, 4 Jul 2023 12:01:04 -0400 Subject: drm/msm/dpu: add missing flush and fetch bits for DMA4/DMA5 planes Note that with this, DMA4/DMA5 are still non-functional, but at least display *something* in modetest instead of nothing or underflow. Fixes: efcd0107727c ("drm/msm/dpu: add support for SM8550") Signed-off-by: Jonathan Marek Reviewed-by: Abhinav Kumar Tested-by: Neil Armstrong # on SM8550-QRD Patchwork: https://patchwork.freedesktop.org/patch/545548/ Link: https://lore.kernel.org/r/20230704160106.26055-1-jonathan@marek.ca Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c index c278fb9d2b5b..86182c734606 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c @@ -51,7 +51,7 @@ static const u32 fetch_tbl[SSPP_MAX] = {CTL_INVALID_BIT, 16, 17, 18, 19, CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, CTL_INVALID_BIT, 0, - 1, 2, 3, CTL_INVALID_BIT, CTL_INVALID_BIT}; + 1, 2, 3, 4, 5}; static int _mixer_stages(const struct dpu_lm_cfg *mixer, int count, enum dpu_lm lm) @@ -198,6 +198,12 @@ static void dpu_hw_ctl_update_pending_flush_sspp(struct dpu_hw_ctl *ctx, case SSPP_DMA3: ctx->pending_flush_mask |= BIT(25); break; + case SSPP_DMA4: + ctx->pending_flush_mask |= BIT(13); + break; + case SSPP_DMA5: + ctx->pending_flush_mask |= BIT(14); + break; case SSPP_CURSOR0: ctx->pending_flush_mask |= BIT(22); break; -- cgit v1.2.3 From e8383f5cf1b3573ce140a80bfbfd809278ab16d6 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 7 Jul 2023 22:39:32 +0300 Subject: drm/msm/dpu: drop enum dpu_core_perf_data_bus_id Drop the leftover of bus-client -> interconnect conversion, the enum dpu_core_perf_data_bus_id. Fixes: cb88482e2570 ("drm/msm/dpu: clean up references of DPU custom bus scaling") Reviewed-by: Konrad Dybcio Reviewed-by: Abhinav Kumar Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/546048/ Link: https://lore.kernel.org/r/20230707193942.3806526-2-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h index e3795995e145..29bb8ee2bc26 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h @@ -14,19 +14,6 @@ #define DPU_PERF_DEFAULT_MAX_CORE_CLK_RATE 412500000 -/** - * enum dpu_core_perf_data_bus_id - data bus identifier - * @DPU_CORE_PERF_DATA_BUS_ID_MNOC: DPU/MNOC data bus - * @DPU_CORE_PERF_DATA_BUS_ID_LLCC: MNOC/LLCC data bus - * @DPU_CORE_PERF_DATA_BUS_ID_EBI: LLCC/EBI data bus - */ -enum dpu_core_perf_data_bus_id { - DPU_CORE_PERF_DATA_BUS_ID_MNOC, - DPU_CORE_PERF_DATA_BUS_ID_LLCC, - DPU_CORE_PERF_DATA_BUS_ID_EBI, - DPU_CORE_PERF_DATA_BUS_ID_MAX, -}; - /** * struct dpu_core_perf_params - definition of performance parameters * @max_per_pipe_ib: maximum instantaneous bandwidth request -- cgit v1.2.3 From 97368254a08e2ca4766e7f84a45840230fe77fa3 Mon Sep 17 00:00:00 2001 From: Marijn Suijten Date: Tue, 27 Jun 2023 22:14:16 +0200 Subject: drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config The regulator setup was likely copied from other SoCs by mistake. Just like SM6125 the DSI PHY on this platform is not getting power from a regulator but from the MX power domain. Fixes: 572e9fd6d14a ("drm/msm/dsi: Add phy configuration for QCM2290") Signed-off-by: Marijn Suijten Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/544536/ Link: https://lore.kernel.org/r/20230627-sm6125-dpu-v2-1-03e430a2078c@somainline.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c index 3ce45b023e63..31deda1c664a 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c @@ -1087,8 +1087,6 @@ const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = { const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = { .has_phy_lane = true, - .regulator_data = dsi_phy_14nm_17mA_regulators, - .num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators), .ops = { .enable = dsi_14nm_phy_enable, .disable = dsi_14nm_phy_disable, -- cgit v1.2.3 From 95ce158b6c93b28842b54b42ad1cb221b9844062 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Jul 2023 00:34:05 +0200 Subject: dsa: mv88e6xxx: Do a final check before timing out I get sporadic timeouts from the driver when using the MV88E6352. Reading the status again after the loop fixes the problem: the operation is successful but goes undetected. Some added prints show things like this: [ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1b reg 0b, mask 8000, val 0000, data c000 [ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for ATU op 4000, fid 0001 (...) [ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1c reg 18, mask 8000, val 0000, data 9860 [ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting for PHY command 1860 to complete The reason is probably not the commands: I think those are mostly fine with the 50+50ms timeout, but the problem appears when OpenWrt brings up several interfaces in parallel on a system with 7 populated ports: if one of them take more than 50 ms and waits one or more of the others can get stuck on the mutex for the switch and then this can easily multiply. As we sleep and wait, the function loop needs a final check after exiting the loop if we were successful. Suggested-by: Andrew Lunn Cc: Tobias Waldekranz Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mv88e6xxx/chip.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 8b51756bd805..c7d51a539451 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -109,6 +109,13 @@ int mv88e6xxx_wait_mask(struct mv88e6xxx_chip *chip, int addr, int reg, usleep_range(1000, 2000); } + err = mv88e6xxx_read(chip, addr, reg, &data); + if (err) + return err; + + if ((data & mask) == val) + return 0; + dev_err(chip->dev, "Timeout while waiting for switch\n"); return -ETIMEDOUT; } -- cgit v1.2.3 From 5e1627cb43ddf1b24b92eb26f8d958a3f5676ccb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Jul 2023 10:15:10 -0400 Subject: net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb The syzbot fuzzer identified a problem in the usbnet driver: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc9000463f568 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001 RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003 R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0 Call Trace: usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3578 [inline] dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594 ... This bug is caused by the fact that usbnet trusts the bulk endpoint addresses its probe routine receives in the driver_info structure, and it does not check to see that these endpoints actually exist and have the expected type and directions. The fix is simply to add such a check. Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern CC: Oliver Neukum Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski --- drivers/net/usb/usbnet.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 283ffddda821..2d14b0d78541 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1775,6 +1775,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) } else if (!info->in || !info->out) status = usbnet_get_endpoints (dev, udev); else { + u8 ep_addrs[3] = { + info->in + USB_DIR_IN, info->out + USB_DIR_OUT, 0 + }; + dev->in = usb_rcvbulkpipe (xdev, info->in); dev->out = usb_sndbulkpipe (xdev, info->out); if (!(info->flags & FLAG_NO_SETINT)) @@ -1784,6 +1788,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) else status = 0; + if (status == 0 && !usb_check_bulk_endpoints(udev, ep_addrs)) + status = -EINVAL; } if (status >= 0 && dev->status) status = init_status (dev, udev); -- cgit v1.2.3 From 9c2dcfc2cf0f2e4e0a0db33bc1a626e35928c475 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 30 May 2023 12:16:39 +0200 Subject: media: tc358746: Address compiler warnings Address these compiler warnings by initialising the m_best and p_best values to 0 and 1 respectively (as latter is used as a divisor): drivers/media/i2c/tc358746.c: In function 'tc358746_find_pll_settings': >> drivers/media/i2c/tc358746.c:817:13: warning: 'p_best' is used uninitialized [-Wuninitialized] 817 | u16 p_best, p; | ^~~~~~ >> drivers/media/i2c/tc358746.c:816:13: warning: 'm_best' is used uninitialized [-Wuninitialized] 816 | u16 m_best, mul; | ^~~~~~ The warnings may well be a false positive but it is difficult for a compiler to find out whether that truly is the case. Closes: https://lore.kernel.org/oe-kbuild-all/202305301627.fLT3Bkds-lkp@intel.com/ Reported-by: kernel test robot Fixes: 80a21da3605 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver") Signed-off-by: Sakari Ailus Reviewed-by: Marco Felsch Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/tc358746.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/i2c/tc358746.c b/drivers/media/i2c/tc358746.c index e9b2d906c177..3f7e147ef594 100644 --- a/drivers/media/i2c/tc358746.c +++ b/drivers/media/i2c/tc358746.c @@ -813,8 +813,8 @@ static unsigned long tc358746_find_pll_settings(struct tc358746 *tc358746, u32 min_delta = 0xffffffff; u16 prediv_max = 17; u16 prediv_min = 1; - u16 m_best, mul; - u16 p_best, p; + u16 m_best = 0, mul; + u16 p_best = 1, p; u8 postdiv; if (fout > 1000 * HZ_PER_MHZ) { -- cgit v1.2.3 From bf4c985707d3168ebb7d87d15830de66949d979c Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Tue, 13 Jun 2023 18:47:53 +0200 Subject: media: staging: atomisp: select V4L2_FWNODE Select V4L2_FWNODE as the driver depends on it. Reported-by: Andy Shevchenko Fixes: aa31f6514047 ("media: atomisp: allow building the driver again") Signed-off-by: Sakari Ailus Tested-by: Andy Shevchenko Reviewed-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/staging/media/atomisp/Kconfig b/drivers/staging/media/atomisp/Kconfig index c9bff98e5309..e9b168ba97bf 100644 --- a/drivers/staging/media/atomisp/Kconfig +++ b/drivers/staging/media/atomisp/Kconfig @@ -13,6 +13,7 @@ config VIDEO_ATOMISP tristate "Intel Atom Image Signal Processor Driver" depends on VIDEO_DEV && INTEL_ATOMISP depends on PMIC_OPREGION + select V4L2_FWNODE select IOSF_MBI select VIDEOBUF2_VMALLOC select VIDEO_V4L2_SUBDEV_API -- cgit v1.2.3 From 517f088385e1b8015606143e6212cb30f8714070 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 31 Jan 2023 11:32:44 +0100 Subject: media: amphion: use dev_err_probe This simplifies the code and silences -517 error messages. Also the reason is listed in /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein Reviewed-by: ming_qian Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/amphion/vpu_mbox.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/amphion/vpu_mbox.c b/drivers/media/platform/amphion/vpu_mbox.c index bf759eb2fd46..b6d5b4844f67 100644 --- a/drivers/media/platform/amphion/vpu_mbox.c +++ b/drivers/media/platform/amphion/vpu_mbox.c @@ -46,11 +46,10 @@ static int vpu_mbox_request_channel(struct device *dev, struct vpu_mbox *mbox) cl->rx_callback = vpu_mbox_rx_callback; ch = mbox_request_channel_byname(cl, mbox->name); - if (IS_ERR(ch)) { - dev_err(dev, "Failed to request mbox chan %s, ret : %ld\n", - mbox->name, PTR_ERR(ch)); - return PTR_ERR(ch); - } + if (IS_ERR(ch)) + return dev_err_probe(dev, PTR_ERR(ch), + "Failed to request mbox chan %s\n", + mbox->name); mbox->ch = ch; return 0; -- cgit v1.2.3 From dcff0b56f661b6b42e828012b464d22cc2068c38 Mon Sep 17 00:00:00 2001 From: Nicolas Dufresne Date: Thu, 25 May 2023 22:10:15 +0200 Subject: media: amphion: Fix firmware path to match linux-firmware The path did not match the one it was submitted into linux-firmware which prevented generic distribution from having working CODEC. Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/amphion/vpu_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/amphion/vpu_core.c b/drivers/media/platform/amphion/vpu_core.c index 43d85a54268b..7863b7b53494 100644 --- a/drivers/media/platform/amphion/vpu_core.c +++ b/drivers/media/platform/amphion/vpu_core.c @@ -826,7 +826,7 @@ static const struct dev_pm_ops vpu_core_pm_ops = { static struct vpu_core_resources imx8q_enc = { .type = VPU_CORE_TYPE_ENC, - .fwname = "vpu/vpu_fw_imx8_enc.bin", + .fwname = "amphion/vpu/vpu_fw_imx8_enc.bin", .stride = 16, .max_width = 1920, .max_height = 1920, @@ -841,7 +841,7 @@ static struct vpu_core_resources imx8q_enc = { static struct vpu_core_resources imx8q_dec = { .type = VPU_CORE_TYPE_DEC, - .fwname = "vpu/vpu_fw_imx8_dec.bin", + .fwname = "amphion/vpu/vpu_fw_imx8_dec.bin", .stride = 256, .max_width = 8188, .max_height = 8188, -- cgit v1.2.3 From 53ebeea50599c1ed05277d7a57e331a34e6d6a82 Mon Sep 17 00:00:00 2001 From: Ming Qian Date: Tue, 30 May 2023 09:16:30 +0200 Subject: media: imx-jpeg: Support to assign slot for encoder/decoder imx jpeg encoder and decoder support 4 slots each, aim to support some virtualization scenarios. driver should only enable one slot one time. but due to some hardware issue, only slot 0 can be enabled in imx8q platform, and they may be fixed in imx9 platform. Signed-off-by: Ming Qian Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h | 1 - drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c | 135 +++++++++++----------- drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h | 5 +- 3 files changed, 68 insertions(+), 73 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h index ed15ea348f97..a2b4fb9e29e7 100644 --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg-hw.h @@ -58,7 +58,6 @@ #define CAST_OFBSIZE_LO CAST_STATUS18 #define CAST_OFBSIZE_HI CAST_STATUS19 -#define MXC_MAX_SLOTS 1 /* TODO use all 4 slots*/ /* JPEG-Decoder Wrapper Slot Registers 0..3 */ #define SLOT_BASE 0x10000 #define SLOT_STATUS 0x0 diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c index c0e49be42450..9512c0a61966 100644 --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.c @@ -745,87 +745,77 @@ static void notify_src_chg(struct mxc_jpeg_ctx *ctx) v4l2_event_queue_fh(&ctx->fh, &ev); } -static int mxc_get_free_slot(struct mxc_jpeg_slot_data slot_data[], int n) +static int mxc_get_free_slot(struct mxc_jpeg_slot_data *slot_data) { - int free_slot = 0; - - while (slot_data[free_slot].used && free_slot < n) - free_slot++; - - return free_slot; /* >=n when there are no more free slots */ + if (!slot_data->used) + return slot_data->slot; + return -1; } -static bool mxc_jpeg_alloc_slot_data(struct mxc_jpeg_dev *jpeg, - unsigned int slot) +static bool mxc_jpeg_alloc_slot_data(struct mxc_jpeg_dev *jpeg) { struct mxc_jpeg_desc *desc; struct mxc_jpeg_desc *cfg_desc; void *cfg_stm; - if (jpeg->slot_data[slot].desc) + if (jpeg->slot_data.desc) goto skip_alloc; /* already allocated, reuse it */ /* allocate descriptor for decoding/encoding phase */ desc = dma_alloc_coherent(jpeg->dev, sizeof(struct mxc_jpeg_desc), - &jpeg->slot_data[slot].desc_handle, + &jpeg->slot_data.desc_handle, GFP_ATOMIC); if (!desc) goto err; - jpeg->slot_data[slot].desc = desc; + jpeg->slot_data.desc = desc; /* allocate descriptor for configuration phase (encoder only) */ cfg_desc = dma_alloc_coherent(jpeg->dev, sizeof(struct mxc_jpeg_desc), - &jpeg->slot_data[slot].cfg_desc_handle, + &jpeg->slot_data.cfg_desc_handle, GFP_ATOMIC); if (!cfg_desc) goto err; - jpeg->slot_data[slot].cfg_desc = cfg_desc; + jpeg->slot_data.cfg_desc = cfg_desc; /* allocate configuration stream */ cfg_stm = dma_alloc_coherent(jpeg->dev, MXC_JPEG_MAX_CFG_STREAM, - &jpeg->slot_data[slot].cfg_stream_handle, + &jpeg->slot_data.cfg_stream_handle, GFP_ATOMIC); if (!cfg_stm) goto err; - jpeg->slot_data[slot].cfg_stream_vaddr = cfg_stm; + jpeg->slot_data.cfg_stream_vaddr = cfg_stm; skip_alloc: - jpeg->slot_data[slot].used = true; + jpeg->slot_data.used = true; return true; err: - dev_err(jpeg->dev, "Could not allocate descriptors for slot %d", slot); + dev_err(jpeg->dev, "Could not allocate descriptors for slot %d", jpeg->slot_data.slot); return false; } -static void mxc_jpeg_free_slot_data(struct mxc_jpeg_dev *jpeg, - unsigned int slot) +static void mxc_jpeg_free_slot_data(struct mxc_jpeg_dev *jpeg) { - if (slot >= MXC_MAX_SLOTS) { - dev_err(jpeg->dev, "Invalid slot %d, nothing to free.", slot); - return; - } - /* free descriptor for decoding/encoding phase */ dma_free_coherent(jpeg->dev, sizeof(struct mxc_jpeg_desc), - jpeg->slot_data[slot].desc, - jpeg->slot_data[slot].desc_handle); + jpeg->slot_data.desc, + jpeg->slot_data.desc_handle); /* free descriptor for encoder configuration phase / decoder DHT */ dma_free_coherent(jpeg->dev, sizeof(struct mxc_jpeg_desc), - jpeg->slot_data[slot].cfg_desc, - jpeg->slot_data[slot].cfg_desc_handle); + jpeg->slot_data.cfg_desc, + jpeg->slot_data.cfg_desc_handle); /* free configuration stream */ dma_free_coherent(jpeg->dev, MXC_JPEG_MAX_CFG_STREAM, - jpeg->slot_data[slot].cfg_stream_vaddr, - jpeg->slot_data[slot].cfg_stream_handle); + jpeg->slot_data.cfg_stream_vaddr, + jpeg->slot_data.cfg_stream_handle); - jpeg->slot_data[slot].used = false; + jpeg->slot_data.used = false; } static void mxc_jpeg_check_and_set_last_buffer(struct mxc_jpeg_ctx *ctx, @@ -855,7 +845,7 @@ static void mxc_jpeg_job_finish(struct mxc_jpeg_ctx *ctx, enum vb2_buffer_state v4l2_m2m_buf_done(dst_buf, state); mxc_jpeg_disable_irq(reg, ctx->slot); - ctx->mxc_jpeg->slot_data[ctx->slot].used = false; + jpeg->slot_data.used = false; if (reset) mxc_jpeg_sw_reset(reg); } @@ -919,7 +909,7 @@ static irqreturn_t mxc_jpeg_dec_irq(int irq, void *priv) goto job_unlock; } - if (!jpeg->slot_data[slot].used) + if (!jpeg->slot_data.used) goto job_unlock; dec_ret = readl(reg + MXC_SLOT_OFFSET(slot, SLOT_STATUS)); @@ -1179,13 +1169,13 @@ static void mxc_jpeg_config_dec_desc(struct vb2_buffer *out_buf, struct mxc_jpeg_dev *jpeg = ctx->mxc_jpeg; void __iomem *reg = jpeg->base_reg; unsigned int slot = ctx->slot; - struct mxc_jpeg_desc *desc = jpeg->slot_data[slot].desc; - struct mxc_jpeg_desc *cfg_desc = jpeg->slot_data[slot].cfg_desc; - dma_addr_t desc_handle = jpeg->slot_data[slot].desc_handle; - dma_addr_t cfg_desc_handle = jpeg->slot_data[slot].cfg_desc_handle; - dma_addr_t cfg_stream_handle = jpeg->slot_data[slot].cfg_stream_handle; - unsigned int *cfg_size = &jpeg->slot_data[slot].cfg_stream_size; - void *cfg_stream_vaddr = jpeg->slot_data[slot].cfg_stream_vaddr; + struct mxc_jpeg_desc *desc = jpeg->slot_data.desc; + struct mxc_jpeg_desc *cfg_desc = jpeg->slot_data.cfg_desc; + dma_addr_t desc_handle = jpeg->slot_data.desc_handle; + dma_addr_t cfg_desc_handle = jpeg->slot_data.cfg_desc_handle; + dma_addr_t cfg_stream_handle = jpeg->slot_data.cfg_stream_handle; + unsigned int *cfg_size = &jpeg->slot_data.cfg_stream_size; + void *cfg_stream_vaddr = jpeg->slot_data.cfg_stream_vaddr; struct mxc_jpeg_src_buf *jpeg_src_buf; jpeg_src_buf = vb2_to_mxc_buf(src_buf); @@ -1245,18 +1235,18 @@ static void mxc_jpeg_config_enc_desc(struct vb2_buffer *out_buf, struct mxc_jpeg_dev *jpeg = ctx->mxc_jpeg; void __iomem *reg = jpeg->base_reg; unsigned int slot = ctx->slot; - struct mxc_jpeg_desc *desc = jpeg->slot_data[slot].desc; - struct mxc_jpeg_desc *cfg_desc = jpeg->slot_data[slot].cfg_desc; - dma_addr_t desc_handle = jpeg->slot_data[slot].desc_handle; - dma_addr_t cfg_desc_handle = jpeg->slot_data[slot].cfg_desc_handle; - void *cfg_stream_vaddr = jpeg->slot_data[slot].cfg_stream_vaddr; + struct mxc_jpeg_desc *desc = jpeg->slot_data.desc; + struct mxc_jpeg_desc *cfg_desc = jpeg->slot_data.cfg_desc; + dma_addr_t desc_handle = jpeg->slot_data.desc_handle; + dma_addr_t cfg_desc_handle = jpeg->slot_data.cfg_desc_handle; + void *cfg_stream_vaddr = jpeg->slot_data.cfg_stream_vaddr; struct mxc_jpeg_q_data *q_data; enum mxc_jpeg_image_format img_fmt; int w, h; q_data = mxc_jpeg_get_q_data(ctx, src_buf->vb2_queue->type); - jpeg->slot_data[slot].cfg_stream_size = + jpeg->slot_data.cfg_stream_size = mxc_jpeg_setup_cfg_stream(cfg_stream_vaddr, q_data->fmt->fourcc, q_data->crop.width, @@ -1265,7 +1255,7 @@ static void mxc_jpeg_config_enc_desc(struct vb2_buffer *out_buf, /* chain the config descriptor with the encoding descriptor */ cfg_desc->next_descpt_ptr = desc_handle | MXC_NXT_DESCPT_EN; - cfg_desc->buf_base0 = jpeg->slot_data[slot].cfg_stream_handle; + cfg_desc->buf_base0 = jpeg->slot_data.cfg_stream_handle; cfg_desc->buf_base1 = 0; cfg_desc->line_pitch = 0; cfg_desc->stm_bufbase = 0; /* no output expected */ @@ -1408,7 +1398,7 @@ static void mxc_jpeg_device_run_timeout(struct work_struct *work) unsigned long flags; spin_lock_irqsave(&ctx->mxc_jpeg->hw_lock, flags); - if (ctx->slot < MXC_MAX_SLOTS && ctx->mxc_jpeg->slot_data[ctx->slot].used) { + if (ctx->mxc_jpeg->slot_data.used) { dev_warn(jpeg->dev, "%s timeout, cancel it\n", ctx->mxc_jpeg->mode == MXC_JPEG_DECODE ? "decode" : "encode"); mxc_jpeg_job_finish(ctx, VB2_BUF_STATE_ERROR, true); @@ -1476,12 +1466,12 @@ static void mxc_jpeg_device_run(void *priv) mxc_jpeg_enable(reg); mxc_jpeg_set_l_endian(reg, 1); - ctx->slot = mxc_get_free_slot(jpeg->slot_data, MXC_MAX_SLOTS); - if (ctx->slot >= MXC_MAX_SLOTS) { + ctx->slot = mxc_get_free_slot(&jpeg->slot_data); + if (ctx->slot < 0) { dev_err(dev, "No more free slots\n"); goto end; } - if (!mxc_jpeg_alloc_slot_data(jpeg, ctx->slot)) { + if (!mxc_jpeg_alloc_slot_data(jpeg)) { dev_err(dev, "Cannot allocate slot data\n"); goto end; } @@ -2101,7 +2091,7 @@ static int mxc_jpeg_open(struct file *file) } ctx->fh.ctrl_handler = &ctx->ctrl_handler; mxc_jpeg_set_default_params(ctx); - ctx->slot = MXC_MAX_SLOTS; /* slot not allocated yet */ + ctx->slot = -1; /* slot not allocated yet */ INIT_DELAYED_WORK(&ctx->task_timer, mxc_jpeg_device_run_timeout); if (mxc_jpeg->mode == MXC_JPEG_DECODE) @@ -2677,6 +2667,11 @@ static int mxc_jpeg_attach_pm_domains(struct mxc_jpeg_dev *jpeg) dev_err(dev, "No power domains defined for jpeg node\n"); return jpeg->num_domains; } + if (jpeg->num_domains == 1) { + /* genpd_dev_pm_attach() attach automatically if power domains count is 1 */ + jpeg->num_domains = 0; + return 0; + } jpeg->pd_dev = devm_kmalloc_array(dev, jpeg->num_domains, sizeof(*jpeg->pd_dev), GFP_KERNEL); @@ -2718,7 +2713,6 @@ static int mxc_jpeg_probe(struct platform_device *pdev) int ret; int mode; const struct of_device_id *of_id; - unsigned int slot; of_id = of_match_node(mxc_jpeg_match, dev->of_node); if (!of_id) @@ -2742,19 +2736,22 @@ static int mxc_jpeg_probe(struct platform_device *pdev) if (IS_ERR(jpeg->base_reg)) return PTR_ERR(jpeg->base_reg); - for (slot = 0; slot < MXC_MAX_SLOTS; slot++) { - dec_irq = platform_get_irq(pdev, slot); - if (dec_irq < 0) { - ret = dec_irq; - goto err_irq; - } - ret = devm_request_irq(&pdev->dev, dec_irq, mxc_jpeg_dec_irq, - 0, pdev->name, jpeg); - if (ret) { - dev_err(&pdev->dev, "Failed to request irq %d (%d)\n", - dec_irq, ret); - goto err_irq; - } + ret = of_property_read_u32_index(pdev->dev.of_node, "slot", 0, &jpeg->slot_data.slot); + if (ret) + jpeg->slot_data.slot = 0; + dev_info(&pdev->dev, "choose slot %d\n", jpeg->slot_data.slot); + dec_irq = platform_get_irq(pdev, 0); + if (dec_irq < 0) { + dev_err(&pdev->dev, "Failed to get irq %d\n", dec_irq); + ret = dec_irq; + goto err_irq; + } + ret = devm_request_irq(&pdev->dev, dec_irq, mxc_jpeg_dec_irq, + 0, pdev->name, jpeg); + if (ret) { + dev_err(&pdev->dev, "Failed to request irq %d (%d)\n", + dec_irq, ret); + goto err_irq; } jpeg->pdev = pdev; @@ -2914,11 +2911,9 @@ static const struct dev_pm_ops mxc_jpeg_pm_ops = { static void mxc_jpeg_remove(struct platform_device *pdev) { - unsigned int slot; struct mxc_jpeg_dev *jpeg = platform_get_drvdata(pdev); - for (slot = 0; slot < MXC_MAX_SLOTS; slot++) - mxc_jpeg_free_slot_data(jpeg, slot); + mxc_jpeg_free_slot_data(jpeg); pm_runtime_disable(&pdev->dev); video_unregister_device(jpeg->dec_vdev); diff --git a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h index 87157db78082..d80e94cc9d99 100644 --- a/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h +++ b/drivers/media/platform/nxp/imx-jpeg/mxc-jpeg.h @@ -97,7 +97,7 @@ struct mxc_jpeg_ctx { struct mxc_jpeg_q_data cap_q; struct v4l2_fh fh; enum mxc_jpeg_enc_state enc_state; - unsigned int slot; + int slot; unsigned int source_change; bool header_parsed; struct v4l2_ctrl_handler ctrl_handler; @@ -106,6 +106,7 @@ struct mxc_jpeg_ctx { }; struct mxc_jpeg_slot_data { + int slot; bool used; struct mxc_jpeg_desc *desc; // enc/dec descriptor struct mxc_jpeg_desc *cfg_desc; // configuration descriptor @@ -128,7 +129,7 @@ struct mxc_jpeg_dev { struct v4l2_device v4l2_dev; struct v4l2_m2m_dev *m2m_dev; struct video_device *dec_vdev; - struct mxc_jpeg_slot_data slot_data[MXC_MAX_SLOTS]; + struct mxc_jpeg_slot_data slot_data; int num_domains; struct device **pd_dev; struct device_link **pd_link; -- cgit v1.2.3 From 20de9fdaf4883deffb0138eef28e9cbbead32cfd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 1 Jun 2023 23:37:22 +0200 Subject: media: mtk_jpeg_core: avoid unused-variable warning The mtk8195_jpegenc_drvdata object was added outside of an #ifdef causing a harmless build warning. drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1879:32: error: 'mtk8195_jpegenc_drvdata' defined but not used [-Werror=unused-variable] 1879 | static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = { | ^~~~~~~~~~~~~~~~~~~~~~~ A follow-up patch moved it inside of an #ifdef, which caused more warnings, and a third patch ended up adding even more #ifdefs. These were all bogus, since the actual problem here is the incorrect use of of_ptr(). Since the driver (like any other modern platform driver) only works in combination with CONFIG_OF, there is no point in hiding the reference, so just remove that along with all the pointless #ifdef checks in the driver. This improves build coverage and avoids running into the same problem again when another part of the driver gets changed that relies on the #ifdef blocks to be completely matched. Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware") Fixes: 4ae47770d57b ("media: mtk-jpegenc: Fix a compilation issue") Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks") Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c | 6 +----- drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c | 4 +--- drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c | 4 +--- 3 files changed, 3 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c index 4768156181c9..40cb3cb87ba1 100644 --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c @@ -28,7 +28,6 @@ #include "mtk_jpeg_core.h" #include "mtk_jpeg_dec_parse.h" -#if defined(CONFIG_OF) static struct mtk_jpeg_fmt mtk_jpeg_enc_formats[] = { { .fourcc = V4L2_PIX_FMT_JPEG, @@ -102,7 +101,6 @@ static struct mtk_jpeg_fmt mtk_jpeg_dec_formats[] = { .flags = MTK_JPEG_FMT_FLAG_CAPTURE, }, }; -#endif #define MTK_JPEG_ENC_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_enc_formats) #define MTK_JPEG_DEC_NUM_FORMATS ARRAY_SIZE(mtk_jpeg_dec_formats) @@ -1455,7 +1453,6 @@ static const struct dev_pm_ops mtk_jpeg_pm_ops = { SET_RUNTIME_PM_OPS(mtk_jpeg_pm_suspend, mtk_jpeg_pm_resume, NULL) }; -#if defined(CONFIG_OF) static int mtk_jpegenc_get_hw(struct mtk_jpeg_ctx *ctx) { struct mtk_jpegenc_comp_dev *comp_jpeg; @@ -1951,14 +1948,13 @@ static const struct of_device_id mtk_jpeg_match[] = { }; MODULE_DEVICE_TABLE(of, mtk_jpeg_match); -#endif static struct platform_driver mtk_jpeg_driver = { .probe = mtk_jpeg_probe, .remove_new = mtk_jpeg_remove, .driver = { .name = MTK_JPEG_NAME, - .of_match_table = of_match_ptr(mtk_jpeg_match), + .of_match_table = mtk_jpeg_match, .pm = &mtk_jpeg_pm_ops, }, }; diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c index 869068fac5e2..baa7be58ce69 100644 --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c @@ -39,7 +39,6 @@ enum mtk_jpeg_color { MTK_JPEG_COLOR_400 = 0x00110000 }; -#if defined(CONFIG_OF) static const struct of_device_id mtk_jpegdec_hw_ids[] = { { .compatible = "mediatek,mt8195-jpgdec-hw", @@ -47,7 +46,6 @@ static const struct of_device_id mtk_jpegdec_hw_ids[] = { {}, }; MODULE_DEVICE_TABLE(of, mtk_jpegdec_hw_ids); -#endif static inline int mtk_jpeg_verify_align(u32 val, int align, u32 reg) { @@ -653,7 +651,7 @@ static struct platform_driver mtk_jpegdec_hw_driver = { .probe = mtk_jpegdec_hw_probe, .driver = { .name = "mtk-jpegdec-hw", - .of_match_table = of_match_ptr(mtk_jpegdec_hw_ids), + .of_match_table = mtk_jpegdec_hw_ids, }, }; diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c index 71e85b4bbf12..244018365b6f 100644 --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_enc_hw.c @@ -46,7 +46,6 @@ static const struct mtk_jpeg_enc_qlt mtk_jpeg_enc_quality[] = { {.quality_param = 97, .hardware_value = JPEG_ENC_QUALITY_Q97}, }; -#if defined(CONFIG_OF) static const struct of_device_id mtk_jpegenc_drv_ids[] = { { .compatible = "mediatek,mt8195-jpgenc-hw", @@ -54,7 +53,6 @@ static const struct of_device_id mtk_jpegenc_drv_ids[] = { {}, }; MODULE_DEVICE_TABLE(of, mtk_jpegenc_drv_ids); -#endif void mtk_jpeg_enc_reset(void __iomem *base) { @@ -377,7 +375,7 @@ static struct platform_driver mtk_jpegenc_hw_driver = { .probe = mtk_jpegenc_hw_probe, .driver = { .name = "mtk-jpegenc-hw", - .of_match_table = of_match_ptr(mtk_jpegenc_drv_ids), + .of_match_table = mtk_jpegenc_drv_ids, }, }; -- cgit v1.2.3 From 92cbf865ea2e0f2997ff97815c6db182eb23df1b Mon Sep 17 00:00:00 2001 From: Dmitry Antipov Date: Tue, 6 Jun 2023 06:38:15 +0200 Subject: media: pulse8-cec: handle possible ping error Handle (and warn about) possible error waiting for MSGCODE_PING result. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/cec/usb/pulse8/pulse8-cec.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/cec/usb/pulse8/pulse8-cec.c b/drivers/media/cec/usb/pulse8/pulse8-cec.c index 04b13cdc38d2..ba67587bd43e 100644 --- a/drivers/media/cec/usb/pulse8/pulse8-cec.c +++ b/drivers/media/cec/usb/pulse8/pulse8-cec.c @@ -809,8 +809,11 @@ static void pulse8_ping_eeprom_work_handler(struct work_struct *work) mutex_lock(&pulse8->lock); cmd = MSGCODE_PING; - pulse8_send_and_wait(pulse8, &cmd, 1, - MSGCODE_COMMAND_ACCEPTED, 0); + if (pulse8_send_and_wait(pulse8, &cmd, 1, + MSGCODE_COMMAND_ACCEPTED, 0)) { + dev_warn(pulse8->dev, "failed to ping EEPROM\n"); + goto unlock; + } if (pulse8->vers < 2) goto unlock; -- cgit v1.2.3 From 4aaa96b59df5fac41ba891969df6b092061ea9d7 Mon Sep 17 00:00:00 2001 From: Nikolay Burykin Date: Tue, 10 Jan 2023 10:09:00 +0100 Subject: media: pci: cx23885: fix error handling for cx23885 ATSC boards After having been assigned to NULL value at cx23885-dvb.c:1202, pointer '0' is dereferenced at cx23885-dvb.c:2469. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Nikolay Burykin Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/cx23885-dvb.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 8fd5b6ef2428..7551ca4a322a 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -2459,16 +2459,10 @@ static int dvb_register(struct cx23885_tsport *port) request_module("%s", info.type); client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info); if (!i2c_client_has_driver(client_tuner)) { - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - port->i2c_client_demod = NULL; goto frontend_detach; } if (!try_module_get(client_tuner->dev.driver->owner)) { i2c_unregister_device(client_tuner); - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - port->i2c_client_demod = NULL; goto frontend_detach; } port->i2c_client_tuner = client_tuner; @@ -2505,16 +2499,10 @@ static int dvb_register(struct cx23885_tsport *port) request_module("%s", info.type); client_tuner = i2c_new_client_device(&dev->i2c_bus[1].i2c_adap, &info); if (!i2c_client_has_driver(client_tuner)) { - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - port->i2c_client_demod = NULL; goto frontend_detach; } if (!try_module_get(client_tuner->dev.driver->owner)) { i2c_unregister_device(client_tuner); - module_put(client_demod->dev.driver->owner); - i2c_unregister_device(client_demod); - port->i2c_client_demod = NULL; goto frontend_detach; } port->i2c_client_tuner = client_tuner; -- cgit v1.2.3 From d05dea76d4a813eb959ba0a150c45246d54e7148 Mon Sep 17 00:00:00 2001 From: Yunfei Dong Date: Mon, 12 Jun 2023 05:15:57 +0200 Subject: media: mediatek: vcodec: fix cancel_work_sync fail with fluster test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Will cause below warning then reboot when exercising the decoder with fluster on mt8192-asurada-spherion. This deinit function is called on the v4l2 release callback, even though the work might not have been initialized as that only happens if/when the codec specific 'decode' callback is called (as a result of device_run m2m callback). CPU: 5 PID: 2338 Comm: gst-launch-1.0 Tainted: G W 6.4.0-rc5-next-20230607+ #475 Hardware name: Google Spherion (rev0 - 3) (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __flush_work.isra.0+0x23c/0x258 lr : __cancel_work_timer+0x14c/0x1c8 sp : ffff8000896e3b00 x29: ffff8000896e3b00 x28: ffff57c3d4079f80 x27: 0000000000000000 x26: ffff57c3d4079f80 x25: ffffb76395b59dc8 x24: 0000000000000001 x23: ffffb763928daab8 x22: ffff57c3d4079f80 x21: 0000000000000000 x20: ffffb763955f6778 x19: ffff57c3cf06f4a0 x18: 0000000000000000 x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000 x14: ffff57c3c03a1f80 x13: ffffa0616a2fc000 x12: 000000003464d91d x11: 0000000000000000 x10: 0000000000001b10 x9 : ffffb763928de61c x8 : ffff57c3d407baf0 x7 : 0000000000000000 x6 : ffff57c3d4079f80 x5 : ffff57c3d4079f80 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff8000896e3bf0 x1 : 0000000000000011 x0 : 0000000000000000 Call trace: __flush_work.isra.0+0x23c/0x258 __cancel_work_timer+0x14c/0x1c8 cancel_work_sync+0x1c/0x30 vdec_msg_queue_deinit+0xac/0xc8 vdec_h264_slice_deinit+0x64/0xb8 vdec_if_deinit+0x3c/0x68 mtk_vcodec_dec_release+0x20/0x40 fops_vcodec_release+0x50/0xd8 v4l2_release+0x7c/0x100 __fput+0x80/0x270 ____fput+0x18/0x30 task_work_run+0x78/0xe0 do_notify_resume+0x29c/0x7f8 el0_svc+0xa4/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 ---[ end trace 0000000000000000 ]--- Fixes: 297160d411e3 ("media: mediatek: vcodec: move core context from device to each instance") Reported-by: Nícolas F. R. A. Prado Signed-off-by: Yunfei Dong Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c index f555341ae708..04e6dc6cfa1d 100644 --- a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c +++ b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c @@ -233,7 +233,8 @@ void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue, kfree(lat_buf->private_data); } - cancel_work_sync(&msg_queue->core_work); + if (msg_queue->wdma_addr.size) + cancel_work_sync(&msg_queue->core_work); } static void vdec_msg_queue_core_work(struct work_struct *work) -- cgit v1.2.3 From 7ee8acd1b803502878992acd6f99e61f1e8c7a25 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 16 Jun 2023 16:48:47 +0200 Subject: media: verisilicon: fix excessive stack usage In some configurations, gcc decides not to inline the register accessor functions, which in turn leads to lots of temporary hantro_reg structures on the stack that cannot be eliminated because they escape into an uninlined function: drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c:1022:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] Mark all of these as __always_inline so the compiler is able to completely eliminate the temporary structures instead, which brings the stack usage back down to just the normal local variables. Closes: https://lore.kernel.org/oe-kbuild-all/202306151506.goHEegOd-lkp@intel.com/ [hverkuil: fix function prototype alignment, wrap commit log] Reported-by: kernel test robot Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder") Signed-off-by: Arnd Bergmann Reviewed-by: Nicolas Dufresne Tested-by: Nathan Chancellor Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/verisilicon/hantro.h | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/verisilicon/hantro.h b/drivers/media/platform/verisilicon/hantro.h index 6523ffb74881..1afec3df8c73 100644 --- a/drivers/media/platform/verisilicon/hantro.h +++ b/drivers/media/platform/verisilicon/hantro.h @@ -370,26 +370,26 @@ extern int hantro_debug; pr_err("%s:%d: " fmt, __func__, __LINE__, ##args) /* Structure access helpers. */ -static inline struct hantro_ctx *fh_to_ctx(struct v4l2_fh *fh) +static __always_inline struct hantro_ctx *fh_to_ctx(struct v4l2_fh *fh) { return container_of(fh, struct hantro_ctx, fh); } /* Register accessors. */ -static inline void vepu_write_relaxed(struct hantro_dev *vpu, - u32 val, u32 reg) +static __always_inline void vepu_write_relaxed(struct hantro_dev *vpu, + u32 val, u32 reg) { vpu_debug(6, "0x%04x = 0x%08x\n", reg / 4, val); writel_relaxed(val, vpu->enc_base + reg); } -static inline void vepu_write(struct hantro_dev *vpu, u32 val, u32 reg) +static __always_inline void vepu_write(struct hantro_dev *vpu, u32 val, u32 reg) { vpu_debug(6, "0x%04x = 0x%08x\n", reg / 4, val); writel(val, vpu->enc_base + reg); } -static inline u32 vepu_read(struct hantro_dev *vpu, u32 reg) +static __always_inline u32 vepu_read(struct hantro_dev *vpu, u32 reg) { u32 val = readl(vpu->enc_base + reg); @@ -397,27 +397,27 @@ static inline u32 vepu_read(struct hantro_dev *vpu, u32 reg) return val; } -static inline void vdpu_write_relaxed(struct hantro_dev *vpu, - u32 val, u32 reg) +static __always_inline void vdpu_write_relaxed(struct hantro_dev *vpu, + u32 val, u32 reg) { vpu_debug(6, "0x%04x = 0x%08x\n", reg / 4, val); writel_relaxed(val, vpu->dec_base + reg); } -static inline void vdpu_write(struct hantro_dev *vpu, u32 val, u32 reg) +static __always_inline void vdpu_write(struct hantro_dev *vpu, u32 val, u32 reg) { vpu_debug(6, "0x%04x = 0x%08x\n", reg / 4, val); writel(val, vpu->dec_base + reg); } -static inline void hantro_write_addr(struct hantro_dev *vpu, - unsigned long offset, - dma_addr_t addr) +static __always_inline void hantro_write_addr(struct hantro_dev *vpu, + unsigned long offset, + dma_addr_t addr) { vdpu_write(vpu, addr & 0xffffffff, offset); } -static inline u32 vdpu_read(struct hantro_dev *vpu, u32 reg) +static __always_inline u32 vdpu_read(struct hantro_dev *vpu, u32 reg) { u32 val = readl(vpu->dec_base + reg); @@ -425,9 +425,9 @@ static inline u32 vdpu_read(struct hantro_dev *vpu, u32 reg) return val; } -static inline u32 vdpu_read_mask(struct hantro_dev *vpu, - const struct hantro_reg *reg, - u32 val) +static __always_inline u32 vdpu_read_mask(struct hantro_dev *vpu, + const struct hantro_reg *reg, + u32 val) { u32 v; @@ -437,16 +437,16 @@ static inline u32 vdpu_read_mask(struct hantro_dev *vpu, return v; } -static inline void hantro_reg_write(struct hantro_dev *vpu, - const struct hantro_reg *reg, - u32 val) +static __always_inline void hantro_reg_write(struct hantro_dev *vpu, + const struct hantro_reg *reg, + u32 val) { vdpu_write_relaxed(vpu, vdpu_read_mask(vpu, reg, val), reg->base); } -static inline void hantro_reg_write_s(struct hantro_dev *vpu, - const struct hantro_reg *reg, - u32 val) +static __always_inline void hantro_reg_write_s(struct hantro_dev *vpu, + const struct hantro_reg *reg, + u32 val) { vdpu_write(vpu, vdpu_read_mask(vpu, reg, val), reg->base); } -- cgit v1.2.3 From 0cb1d9c845110ce638a43a1417c7df5968d1daa3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 16 Jun 2023 16:48:48 +0200 Subject: media: verisilicon: change confusingly named relaxed register access The register abstraction has wrappers around both the normal writel() and its writel_relaxed() counterpart, but this has led to a lot of users ending up with the relaxed version. There is sometimes a need to intentionally pick the relaxed accessor for performance critical functions, but I noticed that each hantro_reg_write() call also contains a non-relaxed readl(), which is typically much more expensive than a writel, so there is little benefit here but an added risk of missing a serialization against DMA. To make this behave like other interfaces, use the normal accessor by default and only provide the relaxed version as an alternative for performance critical code. hantro_postproc.c is the only place that used both the relaxed and normal writel, but this does not seem cricital either, so change it all to the normal ones. [hverkuil: fix function prototype alignment] Signed-off-by: Arnd Bergmann Tested-by: Benjamin Gaignard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/verisilicon/hantro.h | 10 +++++----- drivers/media/platform/verisilicon/hantro_postproc.c | 12 ++++++------ 2 files changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/verisilicon/hantro.h b/drivers/media/platform/verisilicon/hantro.h index 1afec3df8c73..77aee9489516 100644 --- a/drivers/media/platform/verisilicon/hantro.h +++ b/drivers/media/platform/verisilicon/hantro.h @@ -441,14 +441,14 @@ static __always_inline void hantro_reg_write(struct hantro_dev *vpu, const struct hantro_reg *reg, u32 val) { - vdpu_write_relaxed(vpu, vdpu_read_mask(vpu, reg, val), reg->base); + vdpu_write(vpu, vdpu_read_mask(vpu, reg, val), reg->base); } -static __always_inline void hantro_reg_write_s(struct hantro_dev *vpu, - const struct hantro_reg *reg, - u32 val) +static __always_inline void hantro_reg_write_relaxed(struct hantro_dev *vpu, + const struct hantro_reg *reg, + u32 val) { - vdpu_write(vpu, vdpu_read_mask(vpu, reg, val), reg->base); + vdpu_write_relaxed(vpu, vdpu_read_mask(vpu, reg, val), reg->base); } void *hantro_get_ctrl(struct hantro_ctx *ctx, u32 id); diff --git a/drivers/media/platform/verisilicon/hantro_postproc.c b/drivers/media/platform/verisilicon/hantro_postproc.c index c977d64105b1..0224ff68ab3f 100644 --- a/drivers/media/platform/verisilicon/hantro_postproc.c +++ b/drivers/media/platform/verisilicon/hantro_postproc.c @@ -21,11 +21,11 @@ val); \ } -#define HANTRO_PP_REG_WRITE_S(vpu, reg_name, val) \ +#define HANTRO_PP_REG_WRITE_RELAXED(vpu, reg_name, val) \ { \ - hantro_reg_write_s(vpu, \ - &hantro_g1_postproc_regs.reg_name, \ - val); \ + hantro_reg_write_relaxed(vpu, \ + &hantro_g1_postproc_regs.reg_name, \ + val); \ } #define VPU_PP_IN_YUYV 0x0 @@ -72,7 +72,7 @@ static void hantro_postproc_g1_enable(struct hantro_ctx *ctx) dma_addr_t dst_dma; /* Turn on pipeline mode. Must be done first. */ - HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x1); + HANTRO_PP_REG_WRITE(vpu, pipeline_en, 0x1); src_pp_fmt = VPU_PP_IN_NV12; @@ -242,7 +242,7 @@ static void hantro_postproc_g1_disable(struct hantro_ctx *ctx) { struct hantro_dev *vpu = ctx->dev; - HANTRO_PP_REG_WRITE_S(vpu, pipeline_en, 0x0); + HANTRO_PP_REG_WRITE(vpu, pipeline_en, 0x0); } static void hantro_postproc_g2_disable(struct hantro_ctx *ctx) -- cgit v1.2.3 From 9845217d60d01d151b45842ef2017a65e8f39f5a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Jul 2023 12:16:16 +0100 Subject: net: dsa: ar9331: Use explict flags for regmap single read/write The at9331 is only able to read or write a single register at once. The driver has a custom regmap bus and chooses to tell the regmap core about this by reporting the maximum transfer sizes rather than the explicit flags that exist at the regmap level. Since there are a number of problems with the raw transfer limits and the regmap level flags are better integrated anyway convert the driver to use the flags. No functional change. Signed-off-by: Mark Brown Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/dsa/qca/ar9331.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c index b2bf78ac485e..3b0937031499 100644 --- a/drivers/net/dsa/qca/ar9331.c +++ b/drivers/net/dsa/qca/ar9331.c @@ -1002,6 +1002,8 @@ static const struct regmap_config ar9331_mdio_regmap_config = { .val_bits = 32, .reg_stride = 4, .max_register = AR9331_SW_REG_PAGE, + .use_single_read = true, + .use_single_write = true, .ranges = ar9331_regmap_range, .num_ranges = ARRAY_SIZE(ar9331_regmap_range), @@ -1018,8 +1020,6 @@ static struct regmap_bus ar9331_sw_bus = { .val_format_endian_default = REGMAP_ENDIAN_NATIVE, .read = ar9331_mdio_read, .write = ar9331_sw_bus_write, - .max_raw_read = 4, - .max_raw_write = 4, }; static int ar9331_sw_probe(struct mdio_device *mdiodev) -- cgit v1.2.3 From b685f1a58956fa36cc01123f253351b25bfacfda Mon Sep 17 00:00:00 2001 From: Tanmay Patil Date: Wed, 12 Jul 2023 16:36:57 +0530 Subject: net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field() CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words. The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the field will be strictly contained within one word. However, this is not guaranteed to be the case and it is possible for ALE field entries to span across up to two words at the most. Fix the methods to handle getting/setting fields spanning up to two words. Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil [s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw_ale.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c index 0c5e783e574c..64bf22cd860c 100644 --- a/drivers/net/ethernet/ti/cpsw_ale.c +++ b/drivers/net/ethernet/ti/cpsw_ale.c @@ -106,23 +106,37 @@ struct cpsw_ale_dev_id { static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) { - int idx; + int idx, idx2; + u32 hi_val = 0; idx = start / 32; + idx2 = (start + bits - 1) / 32; + /* Check if bits to be fetched exceed a word */ + if (idx != idx2) { + idx2 = 2 - idx2; /* flip */ + hi_val = ale_entry[idx2] << ((idx2 * 32) - start); + } start -= idx * 32; idx = 2 - idx; /* flip */ - return (ale_entry[idx] >> start) & BITMASK(bits); + return (hi_val + (ale_entry[idx] >> start)) & BITMASK(bits); } static inline void cpsw_ale_set_field(u32 *ale_entry, u32 start, u32 bits, u32 value) { - int idx; + int idx, idx2; value &= BITMASK(bits); - idx = start / 32; + idx = start / 32; + idx2 = (start + bits - 1) / 32; + /* Check if bits to be set exceed a word */ + if (idx != idx2) { + idx2 = 2 - idx2; /* flip */ + ale_entry[idx2] &= ~(BITMASK(bits + start - (idx2 * 32))); + ale_entry[idx2] |= (value >> ((idx2 * 32) - start)); + } start -= idx * 32; - idx = 2 - idx; /* flip */ + idx = 2 - idx; /* flip */ ale_entry[idx] &= ~(BITMASK(bits) << start); ale_entry[idx] |= (value << start); } -- cgit v1.2.3 From 1d6d537dc55d1f42d16290f00157ac387985b95b Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 13 Jul 2023 03:42:29 +0100 Subject: net: ethernet: mtk_eth_soc: handle probe deferral Move the call to of_get_ethdev_address to mtk_add_mac which is part of the probe function and can hence itself return -EPROBE_DEFER should of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely get rid of the mtk_init function. The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced in situations in which the NVMEM provider holding the MAC address has not yet be loaded at the time mtk_eth_soc is initially probed. In this case probing of mtk_eth_soc should be deferred instead of falling back to use a random MAC address, so once the NVMEM provider becomes available probing can be repeated. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 834c644b67db..2d15342c260a 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -3846,23 +3846,6 @@ static int mtk_hw_deinit(struct mtk_eth *eth) return 0; } -static int __init mtk_init(struct net_device *dev) -{ - struct mtk_mac *mac = netdev_priv(dev); - struct mtk_eth *eth = mac->hw; - int ret; - - ret = of_get_ethdev_address(mac->of_node, dev); - if (ret) { - /* If the mac address is invalid, use random mac address */ - eth_hw_addr_random(dev); - dev_err(eth->dev, "generated random MAC address %pM\n", - dev->dev_addr); - } - - return 0; -} - static void mtk_uninit(struct net_device *dev) { struct mtk_mac *mac = netdev_priv(dev); @@ -4278,7 +4261,6 @@ static const struct ethtool_ops mtk_ethtool_ops = { }; static const struct net_device_ops mtk_netdev_ops = { - .ndo_init = mtk_init, .ndo_uninit = mtk_uninit, .ndo_open = mtk_open, .ndo_stop = mtk_stop, @@ -4340,6 +4322,17 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) mac->hw = eth; mac->of_node = np; + err = of_get_ethdev_address(mac->of_node, eth->netdev[id]); + if (err == -EPROBE_DEFER) + return err; + + if (err) { + /* If the mac address is invalid, use random mac address */ + eth_hw_addr_random(eth->netdev[id]); + dev_err(eth->dev, "generated random MAC address %pM\n", + eth->netdev[id]->dev_addr); + } + memset(mac->hwlro_ip, 0, sizeof(mac->hwlro_ip)); mac->hwlro_ip_cnt = 0; -- cgit v1.2.3 From 4ad23d2368ccce6da74edc74e69300a4d75a2379 Mon Sep 17 00:00:00 2001 From: Wang Ming Date: Thu, 13 Jul 2023 17:51:06 +0800 Subject: bna: Remove error checking for debugfs_create_dir() It is expected that most callers should _ignore_ the errors return by debugfs_create_dir() in bnad_debugfs_init(). Signed-off-by: Wang Ming Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 04ad0f2b9677..7246e13dd559 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -512,11 +512,6 @@ bnad_debugfs_init(struct bnad *bnad) if (!bnad->port_debugfs_root) { bnad->port_debugfs_root = debugfs_create_dir(name, bna_debugfs_root); - if (!bnad->port_debugfs_root) { - netdev_warn(bnad->netdev, - "debugfs root dir creation failed\n"); - return; - } atomic_inc(&bna_debugfs_port_count); -- cgit v1.2.3 From a822551c51f0dc063305ca16b9dd0dec7fe1f259 Mon Sep 17 00:00:00 2001 From: Wang Ming Date: Thu, 13 Jul 2023 20:16:03 +0800 Subject: net: ethernet: Remove repeating expression Identify issues that arise by using the tests/doublebitand.cocci semantic patch. Need to remove duplicate expression in if statement. Signed-off-by: Wang Ming Reviewed-by: Jiawen Wu Signed-off-by: David S. Miller --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index 39a9aeee7aab..6321178fc814 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1511,7 +1511,6 @@ static void wx_configure_rx(struct wx *wx) psrtype = WX_RDB_PL_CFG_L4HDR | WX_RDB_PL_CFG_L3HDR | WX_RDB_PL_CFG_L2HDR | - WX_RDB_PL_CFG_TUN_TUNHDR | WX_RDB_PL_CFG_TUN_TUNHDR; wr32(wx, WX_RDB_PL_CFG(0), psrtype); -- cgit v1.2.3 From 5def5c1c15bf22934ee227af85c1716762f3829f Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 30 Jun 2023 09:45:33 +0900 Subject: mmc: sdhci-f-sdh30: Replace with sdhci_pltfm Even if sdhci_pltfm_pmops is specified for PM, this driver doesn't apply sdhci_pltfm, so the structure is not correctly referenced in PM functions. This applies sdhci_pltfm to this driver to fix this issue. - Call sdhci_pltfm_init() instead of sdhci_alloc_host() and other functions that covered by sdhci_pltfm. - Move ops and quirks to sdhci_pltfm_data - Replace sdhci_priv() with own private function sdhci_f_sdh30_priv(). Fixes: 87a507459f49 ("mmc: sdhci: host: add new f_sdh30") Signed-off-by: Kunihiko Hayashi Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230630004533.26644-1-hayashi.kunihiko@socionext.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci_f_sdh30.c | 60 ++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c index a202a69a4b08..b01ffb4d0973 100644 --- a/drivers/mmc/host/sdhci_f_sdh30.c +++ b/drivers/mmc/host/sdhci_f_sdh30.c @@ -29,9 +29,16 @@ struct f_sdhost_priv { bool enable_cmd_dat_delay; }; +static void *sdhci_f_sdhost_priv(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + return sdhci_pltfm_priv(pltfm_host); +} + static void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host) { - struct f_sdhost_priv *priv = sdhci_priv(host); + struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host); u32 ctrl = 0; usleep_range(2500, 3000); @@ -64,7 +71,7 @@ static unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host) static void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask) { - struct f_sdhost_priv *priv = sdhci_priv(host); + struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host); u32 ctl; if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0) @@ -95,30 +102,32 @@ static const struct sdhci_ops sdhci_f_sdh30_ops = { .set_uhs_signaling = sdhci_set_uhs_signaling, }; +static const struct sdhci_pltfm_data sdhci_f_sdh30_pltfm_data = { + .ops = &sdhci_f_sdh30_ops, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC + | SDHCI_QUIRK_INVERTED_WRITE_PROTECT, + .quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE + | SDHCI_QUIRK2_TUNING_WORK_AROUND, +}; + static int sdhci_f_sdh30_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; - int irq, ctrl = 0, ret = 0; + int ctrl = 0, ret = 0; struct f_sdhost_priv *priv; + struct sdhci_pltfm_host *pltfm_host; u32 reg = 0; - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); + host = sdhci_pltfm_init(pdev, &sdhci_f_sdh30_pltfm_data, + sizeof(struct f_sdhost_priv)); if (IS_ERR(host)) return PTR_ERR(host); - priv = sdhci_priv(host); + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); priv->dev = dev; - host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | - SDHCI_QUIRK_INVERTED_WRITE_PROTECT; - host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | - SDHCI_QUIRK2_TUNING_WORK_AROUND; - priv->enable_cmd_dat_delay = device_property_read_bool(dev, "fujitsu,cmd-dat-delay-select"); @@ -126,18 +135,6 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev) if (ret) goto err; - platform_set_drvdata(pdev, host); - - host->hw_name = "f_sdh30"; - host->ops = &sdhci_f_sdh30_ops; - host->irq = irq; - - host->ioaddr = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(host->ioaddr)) { - ret = PTR_ERR(host->ioaddr); - goto err; - } - if (dev_of_node(dev)) { sdhci_get_of_property(pdev); @@ -204,24 +201,21 @@ err_rst: err_clk: clk_disable_unprepare(priv->clk_iface); err: - sdhci_free_host(host); + sdhci_pltfm_free(pdev); + return ret; } static int sdhci_f_sdh30_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); - struct f_sdhost_priv *priv = sdhci_priv(host); - - sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == - 0xffffffff); + struct f_sdhost_priv *priv = sdhci_f_sdhost_priv(host); reset_control_assert(priv->rst); clk_disable_unprepare(priv->clk); clk_disable_unprepare(priv->clk_iface); - sdhci_free_host(host); - platform_set_drvdata(pdev, NULL); + sdhci_pltfm_unregister(pdev); return 0; } -- cgit v1.2.3 From 8b58f757cd1c712b5f081e4c26b13611298dfb07 Mon Sep 17 00:00:00 2001 From: Thomas GENTY Date: Fri, 14 Jul 2023 12:51:17 +0200 Subject: platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet Fix the axes and add home button support as suggested by Hans de Goede. Signed-off-by: Thomas GENTY Link: https://lore.kernel.org/r/20230714105117.192938-1-tomlohave@gmail.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/touchscreen_dmi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index a5b687eed8f3..f9301a9382e7 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -27,11 +27,12 @@ struct ts_dmi_data { /* NOTE: Please keep all entries sorted alphabetically */ static const struct property_entry archos_101_cesium_educ_props[] = { - PROPERTY_ENTRY_U32("touchscreen-size-x", 1280), - PROPERTY_ENTRY_U32("touchscreen-size-y", 1850), - PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1850), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1280), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-archos-101-cesium-educ.fw"), { } }; -- cgit v1.2.3 From f2ae72541d52a0bf50366840fe2238aaf111f7ae Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 11 Jul 2023 11:59:20 +0200 Subject: platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() Muxed (mem) regions will wait in request_mem_region_muxed() if the region is busy (in use by another consumer) during the call. In order to wake-up possibly waiting other consumers of the region, it must be released by a release_mem_region() call, which will actually wake up any waiters. release_mem_region() also frees the resource created by request_mem_region_muxed(), avoiding the need for the unmatched kfree(). Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Reviewed-by: Mario Limonciello Link: https://lore.kernel.org/r/20230711095920.264308-1-hdegoede@redhat.com --- drivers/platform/x86/amd/pmc-quirks.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/amd/pmc-quirks.c b/drivers/platform/x86/amd/pmc-quirks.c index 362e7c0097d7..ad702463a65d 100644 --- a/drivers/platform/x86/amd/pmc-quirks.c +++ b/drivers/platform/x86/amd/pmc-quirks.c @@ -11,7 +11,6 @@ #include #include #include -#include #include "pmc.h" @@ -135,12 +134,10 @@ static const struct dmi_system_id fwbug_list[] = { */ static void amd_pmc_skip_nvme_smi_handler(u32 s2idle_bug_mmio) { - struct resource *res; void __iomem *addr; u8 val; - res = request_mem_region_muxed(s2idle_bug_mmio, 1, "amd_pmc_pm80"); - if (!res) + if (!request_mem_region_muxed(s2idle_bug_mmio, 1, "amd_pmc_pm80")) return; addr = ioremap(s2idle_bug_mmio, 1); @@ -152,8 +149,7 @@ static void amd_pmc_skip_nvme_smi_handler(u32 s2idle_bug_mmio) iounmap(addr); cleanup_resource: - release_resource(res); - kfree(res); + release_mem_region(s2idle_bug_mmio, 1); } void amd_pmc_process_restore_quirks(struct amd_pmc_dev *dev) -- cgit v1.2.3 From ea33cb6fc2788f9fe248d49e1c0b2553a58436ef Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Jul 2023 11:20:44 +0300 Subject: accel/qaic: tighten bounds checking in encode_message() There are several issues in this code. The check at the start of the loop: if (user_len >= user_msg->len) { This check does not ensure that we have enough space for the trans_hdr (8 bytes). Instead the check needs to be: if (user_len > user_msg->len - sizeof(*trans_hdr)) { That subtraction is done as an unsigned long we want to avoid negatives. Add a lower bound to the start of the function. if (user_msg->len < sizeof(*trans_hdr)) There is a second integer underflow which can happen if trans_hdr->len is zero inside the encode_passthrough() function. memcpy(out_trans->data, in_trans->data, in_trans->hdr.len - sizeof(in_trans->hdr)); Instead of adding a check to encode_passthrough() it's better to check in this central place. Add that check: if (trans_hdr->len < sizeof(trans_hdr) The final concern is that the "user_len + trans_hdr->len" might have an integer overflow bug. Use size_add() to prevent that. - if (user_len + trans_hdr->len > user_msg->len) { + if (size_add(user_len, trans_hdr->len) > user_msg->len) { Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter Reviewed-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Jeffrey Hugo Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/9a0cb0c1-a974-4f10-bc8d-94437983639a@moroto.mountain --- drivers/accel/qaic/qaic_control.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index 5c57f7b4494e..2fdd5959c52f 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -748,7 +749,8 @@ static int encode_message(struct qaic_device *qdev, struct manage_msg *user_msg, int ret; int i; - if (!user_msg->count) { + if (!user_msg->count || + user_msg->len < sizeof(*trans_hdr)) { ret = -EINVAL; goto out; } @@ -765,12 +767,13 @@ static int encode_message(struct qaic_device *qdev, struct manage_msg *user_msg, } for (i = 0; i < user_msg->count; ++i) { - if (user_len >= user_msg->len) { + if (user_len > user_msg->len - sizeof(*trans_hdr)) { ret = -EINVAL; break; } trans_hdr = (struct qaic_manage_trans_hdr *)(user_msg->data + user_len); - if (user_len + trans_hdr->len > user_msg->len) { + if (trans_hdr->len < sizeof(trans_hdr) || + size_add(user_len, trans_hdr->len) > user_msg->len) { ret = -EINVAL; break; } -- cgit v1.2.3 From 51b56382ed2a2b03347372272362b3baa623ed1e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Jul 2023 11:20:54 +0300 Subject: accel/qaic: tighten bounds checking in decode_message() Copy the bounds checking from encode_message() to decode_message(). This patch addresses the following concerns. Ensure that there is enough space for at least one header so that we don't have a negative size later. if (msg_hdr_len < sizeof(*trans_hdr)) Ensure that we have enough space to read the next header from the msg->data. if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) return -EINVAL; Check that the trans_hdr->len is not below the minimum size: if (hdr_len < sizeof(*trans_hdr)) This minimum check ensures that we don't corrupt memory in decode_passthrough() when we do. memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr)); And finally, use size_add() to prevent an integer overflow: if (size_add(msg_len, hdr_len) > msg_hdr_len) Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter Reviewed-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Jeffrey Hugo Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q5nbLyDO7kJa+@moroto --- drivers/accel/qaic/qaic_control.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index 2fdd5959c52f..752b67aff777 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -956,15 +956,23 @@ static int decode_message(struct qaic_device *qdev, struct manage_msg *user_msg, int ret; int i; - if (msg_hdr_len > QAIC_MANAGE_MAX_MSG_LENGTH) + if (msg_hdr_len < sizeof(*trans_hdr) || + msg_hdr_len > QAIC_MANAGE_MAX_MSG_LENGTH) return -EINVAL; user_msg->len = 0; user_msg->count = le32_to_cpu(msg->hdr.count); for (i = 0; i < user_msg->count; ++i) { + u32 hdr_len; + + if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) + return -EINVAL; + trans_hdr = (struct wire_trans_hdr *)(msg->data + msg_len); - if (msg_len + le32_to_cpu(trans_hdr->len) > msg_hdr_len) + hdr_len = le32_to_cpu(trans_hdr->len); + if (hdr_len < sizeof(*trans_hdr) || + size_add(msg_len, hdr_len) > msg_hdr_len) return -EINVAL; switch (le32_to_cpu(trans_hdr->type)) { -- cgit v1.2.3 From 47d87f71d00b7091b43a56f608f7151b33e5772e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Jul 2023 11:21:00 +0300 Subject: accel/qaic: Add consistent integer overflow checks The encode_dma() function has integer overflow checks. The encode_passthrough(), encode_activate() and encode_status() functions did not. I added integer overflow checking everywhere. I also updated the integer overflow checking in encode_dma() to use size_add() so everything is consistent. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter Reviewed-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Jeffrey Hugo Cc: stable@vger.kernel.org # 6.4.x [jhugo: tweak if in encode_dma() to match existing style] Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q7IsPkj6WSCcL@moroto --- drivers/accel/qaic/qaic_control.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index 752b67aff777..2c336a86e0fd 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -367,7 +367,7 @@ static int encode_passthrough(struct qaic_device *qdev, void *trans, struct wrap if (in_trans->hdr.len % 8 != 0) return -EINVAL; - if (msg_hdr_len + in_trans->hdr.len > QAIC_MANAGE_EXT_MSG_LENGTH) + if (size_add(msg_hdr_len, in_trans->hdr.len) > QAIC_MANAGE_EXT_MSG_LENGTH) return -ENOSPC; trans_wrapper = add_wrapper(wrappers, @@ -558,11 +558,8 @@ static int encode_dma(struct qaic_device *qdev, void *trans, struct wrapper_list msg = &wrapper->msg; msg_hdr_len = le32_to_cpu(msg->hdr.len); - if (msg_hdr_len > (UINT_MAX - QAIC_MANAGE_EXT_MSG_LENGTH)) - return -EINVAL; - /* There should be enough space to hold at least one ASP entry. */ - if (msg_hdr_len + sizeof(*out_trans) + sizeof(struct wire_addr_size_pair) > + if (size_add(msg_hdr_len, sizeof(*out_trans) + sizeof(struct wire_addr_size_pair)) > QAIC_MANAGE_EXT_MSG_LENGTH) return -ENOMEM; @@ -635,7 +632,7 @@ static int encode_activate(struct qaic_device *qdev, void *trans, struct wrapper msg = &wrapper->msg; msg_hdr_len = le32_to_cpu(msg->hdr.len); - if (msg_hdr_len + sizeof(*out_trans) > QAIC_MANAGE_MAX_MSG_LENGTH) + if (size_add(msg_hdr_len, sizeof(*out_trans)) > QAIC_MANAGE_MAX_MSG_LENGTH) return -ENOSPC; if (!in_trans->queue_size) @@ -719,7 +716,7 @@ static int encode_status(struct qaic_device *qdev, void *trans, struct wrapper_l msg = &wrapper->msg; msg_hdr_len = le32_to_cpu(msg->hdr.len); - if (msg_hdr_len + in_trans->hdr.len > QAIC_MANAGE_MAX_MSG_LENGTH) + if (size_add(msg_hdr_len, in_trans->hdr.len) > QAIC_MANAGE_MAX_MSG_LENGTH) return -ENOSPC; trans_wrapper = add_wrapper(wrappers, sizeof(*trans_wrapper)); -- cgit v1.2.3 From 73274c33d961f4aa0f968f763e2c9f4210b4f4a3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Jul 2023 11:21:13 +0300 Subject: accel/qaic: Fix a leak in map_user_pages() If get_user_pages_fast() allocates some pages but not as many as we wanted, then the current code leaks those pages. Call put_page() on the pages before returning. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter Reviewed-by: Pranjal Ramajor Asha Kanojiya Reviewed-by: Jeffrey Hugo Reviewed-by: Dafna Hirschfeld Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q+ZuONTsBG+1T@moroto --- drivers/accel/qaic/qaic_control.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/qaic/qaic_control.c b/drivers/accel/qaic/qaic_control.c index 2c336a86e0fd..cfbc92da426f 100644 --- a/drivers/accel/qaic/qaic_control.c +++ b/drivers/accel/qaic/qaic_control.c @@ -419,9 +419,12 @@ static int find_and_map_user_pages(struct qaic_device *qdev, } ret = get_user_pages_fast(xfer_start_addr, nr_pages, 0, page_list); - if (ret < 0 || ret != nr_pages) { - ret = -EFAULT; + if (ret < 0) goto free_page_list; + if (ret != nr_pages) { + nr_pages = ret; + ret = -EFAULT; + goto put_pages; } sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); -- cgit v1.2.3 From 24a3298ac9e6bd8de838ab79f7868207170d556d Mon Sep 17 00:00:00 2001 From: Petr Oros Date: Mon, 19 Jun 2023 12:58:13 +0200 Subject: ice: Unregister netdev and devlink_port only once Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller functions") ice_vsi_release does things twice. There is unregister netdev which is unregistered in ice_deinit_eth also. It also unregisters the devlink_port twice which is also unregistered in ice_deinit_eth(). This double deregistration is hidden because devl_port_unregister ignores the return value of xa_erase. [ 68.642167] Call Trace: [ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice] [ 68.655656] ice_vsi_release+0x445/0x690 [ice] [ 68.660147] ice_deinit+0x99/0x280 [ice] [ 68.664117] ice_remove+0x1b6/0x5c0 [ice] [ 171.103841] Call Trace: [ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice] [ 171.114841] ice_remove+0x158/0x270 [ice] [ 171.118854] pci_device_remove+0x3b/0xc0 [ 171.122779] device_release_driver_internal+0xc7/0x170 [ 171.127912] driver_detach+0x54/0x8c [ 171.131491] bus_remove_driver+0x77/0xd1 [ 171.135406] pci_unregister_driver+0x2d/0xb0 [ 171.139670] ice_module_exit+0xc/0x55f [ice] Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Petr Oros Reviewed-by: Maciej Fijalkowski Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_lib.c | 27 --------------------------- 1 file changed, 27 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c index 00e3afd507a4..0054d7e64ec3 100644 --- a/drivers/net/ethernet/intel/ice/ice_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_lib.c @@ -2972,39 +2972,12 @@ int ice_vsi_release(struct ice_vsi *vsi) return -ENODEV; pf = vsi->back; - /* do not unregister while driver is in the reset recovery pending - * state. Since reset/rebuild happens through PF service task workqueue, - * it's not a good idea to unregister netdev that is associated to the - * PF that is running the work queue items currently. This is done to - * avoid check_flush_dependency() warning on this wq - */ - if (vsi->netdev && !ice_is_reset_in_progress(pf->state) && - (test_bit(ICE_VSI_NETDEV_REGISTERED, vsi->state))) { - unregister_netdev(vsi->netdev); - clear_bit(ICE_VSI_NETDEV_REGISTERED, vsi->state); - } - - if (vsi->type == ICE_VSI_PF) - ice_devlink_destroy_pf_port(pf); - if (test_bit(ICE_FLAG_RSS_ENA, pf->flags)) ice_rss_clean(vsi); ice_vsi_close(vsi); ice_vsi_decfg(vsi); - if (vsi->netdev) { - if (test_bit(ICE_VSI_NETDEV_REGISTERED, vsi->state)) { - unregister_netdev(vsi->netdev); - clear_bit(ICE_VSI_NETDEV_REGISTERED, vsi->state); - } - if (test_bit(ICE_VSI_NETDEV_ALLOCD, vsi->state)) { - free_netdev(vsi->netdev); - vsi->netdev = NULL; - clear_bit(ICE_VSI_NETDEV_ALLOCD, vsi->state); - } - } - /* retain SW VSI data structure since it is needed to unregister and * free VSI netdev when PF is not in reset recovery pending state,\ * for ex: during rmmod. -- cgit v1.2.3 From b3e7b3a6ee92ab927f750a6b19615ce88ece808f Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Thu, 6 Jul 2023 08:25:51 +0200 Subject: ice: prevent NULL pointer deref during reload Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_base.c | 2 ++ drivers/net/ethernet/intel/ice/ice_ethtool.c | 13 +++++++++++-- drivers/net/ethernet/intel/ice/ice_main.c | 10 ++++++++-- 3 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c index 4a12316f7b46..b678bdf96f3a 100644 --- a/drivers/net/ethernet/intel/ice/ice_base.c +++ b/drivers/net/ethernet/intel/ice/ice_base.c @@ -800,6 +800,8 @@ void ice_vsi_free_q_vectors(struct ice_vsi *vsi) ice_for_each_q_vector(vsi, v_idx) ice_free_q_vector(vsi, v_idx); + + vsi->num_q_vectors = 0; } /** diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 8d5cbbd0b3d5..ad4d4702129f 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -2681,8 +2681,13 @@ ice_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring, ring->rx_max_pending = ICE_MAX_NUM_DESC; ring->tx_max_pending = ICE_MAX_NUM_DESC; - ring->rx_pending = vsi->rx_rings[0]->count; - ring->tx_pending = vsi->tx_rings[0]->count; + if (vsi->tx_rings && vsi->rx_rings) { + ring->rx_pending = vsi->rx_rings[0]->count; + ring->tx_pending = vsi->tx_rings[0]->count; + } else { + ring->rx_pending = 0; + ring->tx_pending = 0; + } /* Rx mini and jumbo rings are not supported */ ring->rx_mini_max_pending = 0; @@ -2716,6 +2721,10 @@ ice_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring, return -EINVAL; } + /* Return if there is no rings (device is reloading) */ + if (!vsi->tx_rings || !vsi->rx_rings) + return -EBUSY; + new_tx_cnt = ALIGN(ring->tx_pending, ICE_REQ_DESC_MULTIPLE); if (new_tx_cnt != ring->tx_pending) netdev_info(netdev, "Requested Tx descriptor count rounded up to %d\n", diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 19a5e7f3a075..f02d44455772 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4430,9 +4430,9 @@ static int ice_start_eth(struct ice_vsi *vsi) if (err) return err; - rtnl_lock(); err = ice_vsi_open(vsi); - rtnl_unlock(); + if (err) + ice_fltr_remove_all(vsi); return err; } @@ -4895,6 +4895,7 @@ int ice_load(struct ice_pf *pf) params = ice_vsi_to_params(vsi); params.flags = ICE_VSI_FLAG_INIT; + rtnl_lock(); err = ice_vsi_cfg(vsi, ¶ms); if (err) goto err_vsi_cfg; @@ -4902,6 +4903,7 @@ int ice_load(struct ice_pf *pf) err = ice_start_eth(ice_get_main_vsi(pf)); if (err) goto err_start_eth; + rtnl_unlock(); err = ice_init_rdma(pf); if (err) @@ -4916,9 +4918,11 @@ int ice_load(struct ice_pf *pf) err_init_rdma: ice_vsi_close(ice_get_main_vsi(pf)); + rtnl_lock(); err_start_eth: ice_vsi_decfg(ice_get_main_vsi(pf)); err_vsi_cfg: + rtnl_unlock(); ice_deinit_dev(pf); return err; } @@ -4931,8 +4935,10 @@ void ice_unload(struct ice_pf *pf) { ice_deinit_features(pf); ice_deinit_rdma(pf); + rtnl_lock(); ice_stop_eth(ice_get_main_vsi(pf)); ice_vsi_decfg(ice_get_main_vsi(pf)); + rtnl_unlock(); ice_deinit_dev(pf); } -- cgit v1.2.3 From 676b7c5ecab36274442887ceadd6dee8248a244f Mon Sep 17 00:00:00 2001 From: David Xu Date: Thu, 13 Jul 2023 21:35:28 +0800 Subject: platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 The current code assumes that the CSC3551(multiple cs35l41) always have its interrupt pin connected to GPIO thus the IRQ can be acquired with acpi_dev_gpio_irq_get. However on some newer laptop models this is no longer the case as they have the CSC3551's interrupt pin connected to APIC. This causes smi_i2c_probe to fail on these machines. To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced for cs35l41 smi_node, and smi_get_irq function was modified so it tries to get GPIO irq resource first and if failed, tries to get APIC irq resource for cs35l41. This patch affects only the cs35l41's probing and brings no negative influence on machines that indeed have the cs35l41's interrupt pin connected to GPIO. Signed-off-by: David Xu Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- drivers/platform/x86/serial-multi-instantiate.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/serial-multi-instantiate.c b/drivers/platform/x86/serial-multi-instantiate.c index f3dcbdd72fec..2c2abf69f049 100644 --- a/drivers/platform/x86/serial-multi-instantiate.c +++ b/drivers/platform/x86/serial-multi-instantiate.c @@ -21,6 +21,7 @@ #define IRQ_RESOURCE_NONE 0 #define IRQ_RESOURCE_GPIO 1 #define IRQ_RESOURCE_APIC 2 +#define IRQ_RESOURCE_AUTO 3 enum smi_bus_type { SMI_I2C, @@ -52,6 +53,18 @@ static int smi_get_irq(struct platform_device *pdev, struct acpi_device *adev, int ret; switch (inst->flags & IRQ_RESOURCE_TYPE) { + case IRQ_RESOURCE_AUTO: + ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx); + if (ret > 0) { + dev_dbg(&pdev->dev, "Using gpio irq\n"); + break; + } + ret = platform_get_irq(pdev, inst->irq_idx); + if (ret > 0) { + dev_dbg(&pdev->dev, "Using platform irq\n"); + break; + } + break; case IRQ_RESOURCE_GPIO: ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx); break; @@ -307,10 +320,10 @@ static const struct smi_node int3515_data = { static const struct smi_node cs35l41_hda = { .instances = { - { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 }, - { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 }, - { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 }, - { "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 }, + { "cs35l41-hda", IRQ_RESOURCE_AUTO, 0 }, + { "cs35l41-hda", IRQ_RESOURCE_AUTO, 0 }, + { "cs35l41-hda", IRQ_RESOURCE_AUTO, 0 }, + { "cs35l41-hda", IRQ_RESOURCE_AUTO, 0 }, {} }, .bus_type = SMI_AUTO_DETECT, -- cgit v1.2.3 From 9171dfcda4f26dc6ebfd8d50137c5f294c2060ee Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 3 Jul 2023 13:29:13 +0200 Subject: cxl: fix CONFIG_FW_LOADER dependency When FW_LOADER is disabled, cxl fails to link: arm-linux-gnueabi-ld: drivers/cxl/core/memdev.o: in function `cxl_memdev_setup_fw_upload': memdev.c:(.text+0x90e): undefined reference to `firmware_upload_register' memdev.c:(.text+0x93c): undefined reference to `firmware_upload_unregister' In order to use the firmware_upload_register() function, both FW_LOADER and FW_UPLOAD have to be enabled, which is a bit confusing. In addition, the dependency is on the wrong symbol, as the caller is part of the cxl_core.ko module, not the cxl_mem.ko module. Fixes: 9521875bbe005 ("cxl: add a firmware update mechanism using the sysfs firmware loader") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230703112928.332321-1-arnd@kernel.org Reviewed-by: Xiao Yang Reviewed-by: Dave Jiang Signed-off-by: Vishal Verma --- drivers/cxl/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig index fcbf8295fde3..8ea1d340e438 100644 --- a/drivers/cxl/Kconfig +++ b/drivers/cxl/Kconfig @@ -2,6 +2,8 @@ menuconfig CXL_BUS tristate "CXL (Compute Express Link) Devices Support" depends on PCI + select FW_LOADER + select FW_UPLOAD select PCI_DOE help CXL is a bus that is electrically compatible with PCI Express, but @@ -82,7 +84,6 @@ config CXL_PMEM config CXL_MEM tristate "CXL: Memory Expansion" depends on CXL_PCI - select FW_UPLOAD default CXL_BUS help The CXL.mem protocol allows a device to act as a provider of "System -- cgit v1.2.3 From 95c6bff72b02ca084be60c08503d563e506b733f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 3 Jul 2023 17:17:45 +0300 Subject: cxl/mem: Fix a double shift bug The CXL_FW_CANCEL macro is used with set/test_bit() so it should be a bit number and not the shifted value. The original code is the equivalent of using BIT(BIT(0)) so it's 0x2 instead of 0x1. This has no effect on runtime because it's done consistently and nothing else was using the 0x2 bit. Fixes: 9521875bbe00 ("cxl: add a firmware update mechanism using the sysfs firmware loader") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/a11b0c78-4717-4f4e-90be-f47f300d607c@moroto.mountain Reviewed-by: Vishal Verma Reviewed-by: Davidlohr Bueso Reviewed-by: Dave Jiang Signed-off-by: Vishal Verma --- drivers/cxl/cxlmem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index 79e99c873ca2..499113328586 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -323,7 +323,7 @@ struct cxl_mbox_activate_fw { /* FW state bits */ #define CXL_FW_STATE_BITS 32 -#define CXL_FW_CANCEL BIT(0) +#define CXL_FW_CANCEL 0 /** * struct cxl_fw_state - Firmware upload / activation state -- cgit v1.2.3 From 05abb3be91d8788328231ee02973ab3d47f5e3d2 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 13 Jul 2023 22:47:45 +0300 Subject: dma-buf/dma-resv: Stop leaking on krealloc() failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently dma_resv_get_fences() will leak the previously allocated array if the fence iteration got restarted and the krealloc_array() fails. Free the old array by hand, and make sure we still clear the returned *fences so the caller won't end up accessing freed memory. Some (but not all) of the callers of dma_resv_get_fences() seem to still trawl through the array even when dma_resv_get_fences() failed. And let's zero out *num_fences as well for good measure. Cc: Sumit Semwal Cc: Christian König Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Fixes: d3c80698c9f5 ("dma-buf: use new iterator in dma_resv_get_fences v3") Signed-off-by: Ville Syrjälä Reviewed-by: Christian König Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20230713194745.1751-1-ville.syrjala@linux.intel.com Signed-off-by: Christian König --- drivers/dma-buf/dma-resv.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index b6f71eb00866..38b4110378de 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -571,6 +571,7 @@ int dma_resv_get_fences(struct dma_resv *obj, enum dma_resv_usage usage, dma_resv_for_each_fence_unlocked(&cursor, fence) { if (dma_resv_iter_is_restarted(&cursor)) { + struct dma_fence **new_fences; unsigned int count; while (*num_fences) @@ -579,13 +580,17 @@ int dma_resv_get_fences(struct dma_resv *obj, enum dma_resv_usage usage, count = cursor.num_fences + 1; /* Eventually re-allocate the array */ - *fences = krealloc_array(*fences, count, - sizeof(void *), - GFP_KERNEL); - if (count && !*fences) { + new_fences = krealloc_array(*fences, count, + sizeof(void *), + GFP_KERNEL); + if (count && !new_fences) { + kfree(*fences); + *fences = NULL; + *num_fences = 0; dma_resv_iter_end(&cursor); return -ENOMEM; } + *fences = new_fences; } (*fences)[(*num_fences)++] = dma_fence_get(fence); -- cgit v1.2.3 From 7164360030ea43c0a309fcff1cd728648501dfb7 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 4 Jul 2023 09:36:39 -0700 Subject: drm/msm/adreno: Fix warn splat for devices without revn Recently, a WARN_ON() was introduced to ensure that revn is filled before adreno_is_aXYZ is called. This however doesn't work very well when revn is 0 by design (such as for A635). Cc: Konrad Dybcio Fixes: cc943f43ece7 ("drm/msm/adreno: warn if chip revn is verified before being set") Signed-off-by: Rob Clark Reviewed-by: Dmitry Baryshkov Tested-by: Abhinav Kumar # sc7280 Patchwork: https://patchwork.freedesktop.org/patch/545554/ --- drivers/gpu/drm/msm/adreno/adreno_gpu.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h index d8c9e8cc3753..afbf9e5bd4bc 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h @@ -149,7 +149,8 @@ bool adreno_cmp_rev(struct adreno_rev rev1, struct adreno_rev rev2); static inline bool adreno_is_revn(const struct adreno_gpu *gpu, uint32_t revn) { - WARN_ON_ONCE(!gpu->revn); + /* revn can be zero, but if not is set at same time as info */ + WARN_ON_ONCE(!gpu->info); return gpu->revn == revn; } @@ -161,14 +162,16 @@ static inline bool adreno_has_gmu_wrapper(const struct adreno_gpu *gpu) static inline bool adreno_is_a2xx(const struct adreno_gpu *gpu) { - WARN_ON_ONCE(!gpu->revn); + /* revn can be zero, but if not is set at same time as info */ + WARN_ON_ONCE(!gpu->info); return (gpu->revn < 300); } static inline bool adreno_is_a20x(const struct adreno_gpu *gpu) { - WARN_ON_ONCE(!gpu->revn); + /* revn can be zero, but if not is set at same time as info */ + WARN_ON_ONCE(!gpu->info); return (gpu->revn < 210); } -- cgit v1.2.3 From 317ab1b90e593eba5b65165e959991837f5593bf Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 4 Jul 2023 09:36:40 -0700 Subject: drm/msm/a690: Remove revn and name These fields are deprecated. But any userspace new enough to support a690 also knows how to identify the GPU based on chip-id. Signed-off-by: Rob Clark Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/545552/ --- drivers/gpu/drm/msm/adreno/adreno_device.c | 2 -- drivers/gpu/drm/msm/adreno/adreno_gpu.h | 3 ++- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c index cb94cfd137a8..ce8d0b2475bf 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -369,8 +369,6 @@ static const struct adreno_info gpulist[] = { .hwcg = a640_hwcg, }, { .rev = ADRENO_REV(6, 9, 0, ANY_ID), - .revn = 690, - .name = "A690", .fw = { [ADRENO_FW_SQE] = "a660_sqe.fw", [ADRENO_FW_GMU] = "a690_gmu.bin", diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h index afbf9e5bd4bc..845019891ad1 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h @@ -310,7 +310,8 @@ static inline int adreno_is_a680(const struct adreno_gpu *gpu) static inline int adreno_is_a690(const struct adreno_gpu *gpu) { - return adreno_is_revn(gpu, 690); + /* The order of args is important here to handle ANY_ID correctly */ + return adreno_cmp_rev(ADRENO_REV(6, 9, 0, ANY_ID), gpu->rev); }; /* check for a615, a616, a618, a619 or any derivatives */ -- cgit v1.2.3 From bd846ceee9c478d0397428f02696602ba5eb264a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 11 Jul 2023 10:54:07 -0700 Subject: drm/msm/adreno: Fix snapshot BINDLESS_DATA size The incorrect size was causing "CP | AHB bus error" when snapshotting the GPU state on a6xx gen4 (a660 family). Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/26 Signed-off-by: Rob Clark Reviewed-by: Akhil P Oommen Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Patchwork: https://patchwork.freedesktop.org/patch/546763/ --- drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h index 790f55e24533..e788ed72eb0d 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.h @@ -206,7 +206,7 @@ static const struct a6xx_shader_block { SHADER(A6XX_SP_LB_3_DATA, 0x800), SHADER(A6XX_SP_LB_4_DATA, 0x800), SHADER(A6XX_SP_LB_5_DATA, 0x200), - SHADER(A6XX_SP_CB_BINDLESS_DATA, 0x2000), + SHADER(A6XX_SP_CB_BINDLESS_DATA, 0x800), SHADER(A6XX_SP_CB_LEGACY_DATA, 0x280), SHADER(A6XX_SP_UAV_DATA, 0x80), SHADER(A6XX_SP_INST_TAG, 0x80), -- cgit v1.2.3 From 368da76be8df60e9228a41b7d46e7836a67158fd Mon Sep 17 00:00:00 2001 From: Ahmad Khalifa Date: Sat, 15 Jul 2023 15:58:31 +0100 Subject: hwmon: (nct6775) Fix register for nct6799 Datasheet and variable name point to 0xe6 Fixes: aee395bb1905 ("hwmon: (nct6755) Add support for NCT6799D") Signed-off-by: Ahmad Khalifa Link: https://lore.kernel.org/r/20230715145831.1304633-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c index ada867d6b98a..a409d7a0b813 100644 --- a/drivers/hwmon/nct6775-platform.c +++ b/drivers/hwmon/nct6775-platform.c @@ -586,7 +586,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio int creb; int cred; - cre6 = sio_data->sio_inb(sio_data, 0xe0); + cre6 = sio_data->sio_inb(sio_data, 0xe6); sio_data->sio_select(sio_data, NCT6775_LD_12); cre0 = sio_data->sio_inb(sio_data, 0xe0); -- cgit v1.2.3 From a746b3689546da27125da9ccaea62b1dbaaf927c Mon Sep 17 00:00:00 2001 From: Aleksa Savic Date: Fri, 14 Jul 2023 14:07:11 +0200 Subject: hwmon: (aquacomputer_d5next) Fix incorrect PWM value readout Commit 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets") changed aqc_get_ctrl_val() to return the value through a parameter instead of through the return value, but didn't fix up a case that relied on the old behavior. Fix it to use the proper received value and not the return code. Fixes: 662d20b3a5af ("hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets") Cc: stable@vger.kernel.org Signed-off-by: Aleksa Savic Link: https://lore.kernel.org/r/20230714120712.16721-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/aquacomputer_d5next.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c index a981f7086114..a997dbcb563f 100644 --- a/drivers/hwmon/aquacomputer_d5next.c +++ b/drivers/hwmon/aquacomputer_d5next.c @@ -1027,7 +1027,7 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, if (ret < 0) return ret; - *val = aqc_percent_to_pwm(ret); + *val = aqc_percent_to_pwm(*val); break; } break; -- cgit v1.2.3 From d0ca3b92b7a6f42841ea9da8492aaf649db79780 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 14 Jul 2023 17:21:01 +0200 Subject: mtd: rawnand: rockchip: fix oobfree offset and description Rockchip boot blocks are written per 4 x 512 byte sectors per page. Each page with boot blocks must have a page address (PA) pointer in OOB to the next page. The currently advertised free OOB area starts at offset 6, like if 4 PA bytes were located right after the BBM. This is wrong as the PA bytes are located right before the ECC bytes. Fix the layout by allowing access to all bytes between the BBM and the PA bytes instead of reserving 4 bytes right after the BBM. This change breaks existing jffs2 users. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/d202f12d-188c-20e8-f2c2-9cc874ad4d22@gmail.com --- drivers/mtd/nand/raw/rockchip-nand-controller.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c index 2312e27362cb..37fc07ba57aa 100644 --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c @@ -562,9 +562,10 @@ static int rk_nfc_write_page_raw(struct nand_chip *chip, const u8 *buf, * BBM OOB1 OOB2 OOB3 |......| PA0 PA1 PA2 PA3 * * The rk_nfc_ooblayout_free() function already has reserved - * these 4 bytes with: + * these 4 bytes together with 2 bytes for BBM + * by reducing it's length: * - * oob_region->offset = NFC_SYS_DATA_SIZE + 2; + * oob_region->length = rknand->metadata_size - NFC_SYS_DATA_SIZE - 2; */ if (!i) memcpy(rk_nfc_oob_ptr(chip, i), @@ -933,12 +934,8 @@ static int rk_nfc_ooblayout_free(struct mtd_info *mtd, int section, if (section) return -ERANGE; - /* - * The beginning of the OOB area stores the reserved data for the NFC, - * the size of the reserved data is NFC_SYS_DATA_SIZE bytes. - */ oob_region->length = rknand->metadata_size - NFC_SYS_DATA_SIZE - 2; - oob_region->offset = NFC_SYS_DATA_SIZE + 2; + oob_region->offset = 2; return 0; } -- cgit v1.2.3 From ea690ad78dd611e3906df5b948a516000b05c1cb Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 14 Jul 2023 17:21:21 +0200 Subject: mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts Currently, read/write_page_hwecc() and read/write_page_raw() are not aligned: there is a mismatch in the OOB bytes which are not read/written at the same offset in both cases (raw vs. hwecc). This is a real problem when relying on the presence of the Page Addresses (PA) when using the NAND chip as a boot device, as the BootROM expects additional data in the OOB area at specific locations. Rockchip boot blocks are written per 4 x 512 byte sectors per page. Each page with boot blocks must have a page address (PA) pointer in OOB to the next page. Pages are written in a pattern depending on the NAND chip ID. Generate boot block page address and pattern for hwecc in user space and copy PA data to/from the already reserved last 4 bytes before ECC in the chip->oob_poi data layout. Align the different helpers. This change breaks existing jffs2 users. Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others") Signed-off-by: Johan Jonker Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/5e782c08-862b-51ae-47ff-3299940928ca@gmail.com --- drivers/mtd/nand/raw/rockchip-nand-controller.c | 34 +++++++++++++++---------- 1 file changed, 21 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c index 37fc07ba57aa..5a04680342c3 100644 --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c @@ -598,7 +598,7 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, int pages_per_blk = mtd->erasesize / mtd->writesize; int ret = 0, i, boot_rom_mode = 0; dma_addr_t dma_data, dma_oob; - u32 reg; + u32 tmp; u8 *oob; nand_prog_page_begin_op(chip, page, 0, NULL, 0); @@ -625,6 +625,13 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, * * 0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ... * + * The code here just swaps the first 4 bytes with the last + * 4 bytes without losing any data. + * + * The chip->oob_poi data layout: + * + * BBM OOB1 OOB2 OOB3 |......| PA0 PA1 PA2 PA3 + * * Configure the ECC algorithm supported by the boot ROM. */ if ((page < (pages_per_blk * rknand->boot_blks)) && @@ -635,21 +642,17 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf, } for (i = 0; i < ecc->steps; i++) { - if (!i) { - reg = 0xFFFFFFFF; - } else { + if (!i) + oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE; + else oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; - reg = oob[0] | oob[1] << 8 | oob[2] << 16 | - oob[3] << 24; - } - if (!i && boot_rom_mode) - reg = (page & (pages_per_blk - 1)) * 4; + tmp = oob[0] | oob[1] << 8 | oob[2] << 16 | oob[3] << 24; if (nfc->cfg->type == NFC_V9) - nfc->oob_buf[i] = reg; + nfc->oob_buf[i] = tmp; else - nfc->oob_buf[i * (oob_step / 4)] = reg; + nfc->oob_buf[i * (oob_step / 4)] = tmp; } dma_data = dma_map_single(nfc->dev, (void *)nfc->page_buf, @@ -812,12 +815,17 @@ static int rk_nfc_read_page_hwecc(struct nand_chip *chip, u8 *buf, int oob_on, goto timeout_err; } - for (i = 1; i < ecc->steps; i++) { - oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; + for (i = 0; i < ecc->steps; i++) { + if (!i) + oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE; + else + oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE; + if (nfc->cfg->type == NFC_V9) tmp = nfc->oob_buf[i]; else tmp = nfc->oob_buf[i * (oob_step / 4)]; + *oob++ = (u8)tmp; *oob++ = (u8)(tmp >> 8); *oob++ = (u8)(tmp >> 16); -- cgit v1.2.3 From 6bc471b6c3aeaa7b95d1b86a1bb8d91a3c341fa5 Mon Sep 17 00:00:00 2001 From: Alisa Roman Date: Wed, 14 Jun 2023 18:52:43 +0300 Subject: iio: adc: ad7192: Fix ac excitation feature AC excitation enable feature exposed to user on AD7192, allowing a bit which should be 0 to be set. This feature is specific only to AD7195. AC excitation attribute moved accordingly. In the AD7195 documentation, the AC excitation enable bit is on position 22 in the Configuration register. ACX macro changed to match correct register and bit. Note that the fix tag is for the commit that moved the driver out of staging. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa Roman Cc: stable@vger.kernel.org Reviewed-by: Nuno Sa Link: https://lore.kernel.org/r/20230614155242.160296-1-alisa.roman@analog.com Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7192.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index 8685e0b58a83..7bc3ebfe8081 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -62,7 +62,6 @@ #define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */ #define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ #define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ -#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ #define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ #define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ #define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ @@ -91,6 +90,7 @@ /* Configuration Register Bit Designations (AD7192_REG_CONF) */ #define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ +#define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */ #define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ #define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ #define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ @@ -472,7 +472,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev); - return sysfs_emit(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); + return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX)); } static ssize_t ad7192_show_bridge_switch(struct device *dev, @@ -513,13 +513,13 @@ static ssize_t ad7192_set(struct device *dev, ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); break; - case AD7192_REG_MODE: + case AD7192_REG_CONF: if (val) - st->mode |= AD7192_MODE_ACX; + st->conf |= AD7192_CONF_ACX; else - st->mode &= ~AD7192_MODE_ACX; + st->conf &= ~AD7192_CONF_ACX; - ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); break; default: ret = -EINVAL; @@ -579,12 +579,11 @@ static IIO_DEVICE_ATTR(bridge_switch_en, 0644, static IIO_DEVICE_ATTR(ac_excitation_en, 0644, ad7192_show_ac_excitation, ad7192_set, - AD7192_REG_MODE); + AD7192_REG_CONF); static struct attribute *ad7192_attributes[] = { &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, - &iio_dev_attr_ac_excitation_en.dev_attr.attr, NULL }; @@ -595,6 +594,7 @@ static const struct attribute_group ad7192_attribute_group = { static struct attribute *ad7195_attributes[] = { &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, + &iio_dev_attr_ac_excitation_en.dev_attr.attr, NULL }; -- cgit v1.2.3 From d47b9b84292706784482a661324bbc178153781f Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Tue, 13 Jun 2023 12:34:36 +0300 Subject: iio: light: bu27034: Fix scale format The driver is expecting accuracy of NANOs for intensity scale in raw_write. The IIO core is however defaulting to MICROs. This leads the raw-write of smallest scales to never succeed as correct selector(s) are not found. Fix this by implementing the .write_raw_get_fmt callback to use NANO accuracy for writes of IIO_CHAN_INFO_SCALE. Signed-off-by: Matti Vaittinen Fixes: e52afbd61039 ("iio: light: ROHM BU27034 Ambient Light Sensor") Link: https://lore.kernel.org/r/5369117315cf05b88cf0ccb87373fd77190f6ca2.1686648422.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/rohm-bu27034.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c index e63ef5789cde..bf3de853a811 100644 --- a/drivers/iio/light/rohm-bu27034.c +++ b/drivers/iio/light/rohm-bu27034.c @@ -575,7 +575,7 @@ static int bu27034_set_scale(struct bu27034_data *data, int chan, return -EINVAL; if (chan == BU27034_CHAN_ALS) { - if (val == 0 && val2 == 1000) + if (val == 0 && val2 == 1000000) return 0; return -EINVAL; @@ -587,7 +587,7 @@ static int bu27034_set_scale(struct bu27034_data *data, int chan, goto unlock_out; ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel, - val, val2 * 1000, &gain_sel); + val, val2, &gain_sel); if (ret) { /* * Could not support scale with given time. Need to change time. @@ -624,7 +624,7 @@ static int bu27034_set_scale(struct bu27034_data *data, int chan, /* Can we provide requested scale with this time? */ ret = iio_gts_find_gain_sel_for_scale_using_time( - &data->gts, new_time_sel, val, val2 * 1000, + &data->gts, new_time_sel, val, val2, &gain_sel); if (ret) continue; @@ -1217,6 +1217,21 @@ static int bu27034_read_raw(struct iio_dev *idev, } } +static int bu27034_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_INT_TIME: + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + static int bu27034_write_raw(struct iio_dev *idev, struct iio_chan_spec const *chan, int val, int val2, long mask) @@ -1267,6 +1282,7 @@ static int bu27034_read_avail(struct iio_dev *idev, static const struct iio_info bu27034_info = { .read_raw = &bu27034_read_raw, .write_raw = &bu27034_write_raw, + .write_raw_get_fmt = &bu27034_write_raw_get_fmt, .read_avail = &bu27034_read_avail, }; -- cgit v1.2.3 From 096649cd7cb0fc1c8f684829f816d938ad1eb808 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Tue, 13 Jun 2023 12:34:55 +0300 Subject: iio: light: bu27008: Fix scale format The driver is expecting accuracy of NANOs for intensity scale in raw_write. The IIO core is however defaulting to MICROs. This leads the raw-write of smallest scales to never succeed as correct selector(s) are not found. Fix this by implementing the .write_raw_get_fmt callback to use NANO accuracy for writes of IIO_CHAN_INFO_SCALE. Fixes: 41ff93d14f78 ("iio: light: ROHM BU27008 color sensor") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/e4778b74cde41431f77bc8dd88ec18605da0b400.1686648422.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/rohm-bu27008.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c index 489902bed7f0..80eb14ea8193 100644 --- a/drivers/iio/light/rohm-bu27008.c +++ b/drivers/iio/light/rohm-bu27008.c @@ -633,7 +633,7 @@ static int bu27008_try_find_new_time_gain(struct bu27008_data *data, int val, for (i = 0; i < data->gts.num_itime; i++) { new_time_sel = data->gts.itime_table[i].sel; ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, - new_time_sel, val, val2 * 1000, gain_sel); + new_time_sel, val, val2, gain_sel); if (!ret) break; } @@ -662,7 +662,7 @@ static int bu27008_set_scale(struct bu27008_data *data, goto unlock_out; ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel, - val, val2 * 1000, &gain_sel); + val, val2, &gain_sel); if (ret) { ret = bu27008_try_find_new_time_gain(data, val, val2, &gain_sel); if (ret) @@ -677,6 +677,21 @@ unlock_out: return ret; } +static int bu27008_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_INT_TIME: + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + static int bu27008_write_raw(struct iio_dev *idev, struct iio_chan_spec const *chan, int val, int val2, long mask) @@ -756,6 +771,7 @@ static int bu27008_update_scan_mode(struct iio_dev *idev, static const struct iio_info bu27008_info = { .read_raw = &bu27008_read_raw, .write_raw = &bu27008_write_raw, + .write_raw_get_fmt = &bu27008_write_raw_get_fmt, .read_avail = &bu27008_read_avail, .update_scan_mode = bu27008_update_scan_mode, .validate_trigger = iio_validate_own_trigger, -- cgit v1.2.3 From 95fb1e7b23bc82130016daefa02a87e83185ca95 Mon Sep 17 00:00:00 2001 From: Matti Vaittinen Date: Tue, 13 Jun 2023 12:35:12 +0300 Subject: iio: light: bu27008: Fix intensity data type The intensity data from bu27008 is unsigned. The type of the scan data was incorrectly marked as signed resulting large intensity values to be interpreted as negative ones. Fix the scan data type. Fixes: 41ff93d14f78 ("iio: light: ROHM BU27008 color sensor") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/240a7ca5fc1b76da20d81f930d00f31a54b1fdf8.1686648422.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron --- drivers/iio/light/rohm-bu27008.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c index 80eb14ea8193..b50bf8973d9a 100644 --- a/drivers/iio/light/rohm-bu27008.c +++ b/drivers/iio/light/rohm-bu27008.c @@ -190,7 +190,7 @@ static const struct iio_itime_sel_mul bu27008_itimes[] = { .address = BU27008_REG_##data##_LO, \ .scan_index = BU27008_##color, \ .scan_type = { \ - .sign = 's', \ + .sign = 'u', \ .realbits = 16, \ .storagebits = 16, \ .endianness = IIO_LE, \ -- cgit v1.2.3 From a41e19cc0d6b6a445a4133170b90271e4a2553dc Mon Sep 17 00:00:00 2001 From: Alvin Šipraga Date: Mon, 19 Jun 2023 16:12:39 +0200 Subject: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table. Signed-off-by: Alvin Šipraga Fixes: c43a102e67db ("iio: ina2xx: add support for TI INA2xx Power Monitors") Link: https://lore.kernel.org/r/20230619141239.2257392-1-alvin@pqrs.dk Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ina2xx-adc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c index 213526c1592f..aea83f369437 100644 --- a/drivers/iio/adc/ina2xx-adc.c +++ b/drivers/iio/adc/ina2xx-adc.c @@ -124,6 +124,7 @@ static const struct regmap_config ina2xx_regmap_config = { enum ina2xx_ids { ina219, ina226 }; struct ina2xx_config { + const char *name; u16 config_default; int calibration_value; int shunt_voltage_lsb; /* nV */ @@ -155,6 +156,7 @@ struct ina2xx_chip_info { static const struct ina2xx_config ina2xx_config[] = { [ina219] = { + .name = "ina219", .config_default = INA219_CONFIG_DEFAULT, .calibration_value = 4096, .shunt_voltage_lsb = 10000, @@ -164,6 +166,7 @@ static const struct ina2xx_config ina2xx_config[] = { .chip_id = ina219, }, [ina226] = { + .name = "ina226", .config_default = INA226_CONFIG_DEFAULT, .calibration_value = 2048, .shunt_voltage_lsb = 2500, @@ -996,7 +999,7 @@ static int ina2xx_probe(struct i2c_client *client) /* Patch the current config register with default. */ val = chip->config->config_default; - if (id->driver_data == ina226) { + if (type == ina226) { ina226_set_average(chip, INA226_DEFAULT_AVG, &val); ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val); ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val); @@ -1015,7 +1018,7 @@ static int ina2xx_probe(struct i2c_client *client) } indio_dev->modes = INDIO_DIRECT_MODE; - if (id->driver_data == ina226) { + if (type == ina226) { indio_dev->channels = ina226_channels; indio_dev->num_channels = ARRAY_SIZE(ina226_channels); indio_dev->info = &ina226_info; @@ -1024,7 +1027,7 @@ static int ina2xx_probe(struct i2c_client *client) indio_dev->num_channels = ARRAY_SIZE(ina219_channels); indio_dev->info = &ina219_info; } - indio_dev->name = id->name; + indio_dev->name = id ? id->name : chip->config->name; ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev, &ina2xx_setup_ops); -- cgit v1.2.3 From cec148c2476a6e06cf8190b20de81f98983b53ca Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 4 Jul 2023 08:32:40 +0900 Subject: ata: pata_parport: Add missing protocol modules description Most of the protocol modules for the pata_parport driver are missing a module description, causing warnings such as: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_parport/aten.o when compiling with W=1. Add the missing MODULE_DESCRIPTION() definitions to avoid these warnings. While at it, also add the missing MODULE_AUTHOR() definitions. Signed-off-by: Damien Le Moal --- drivers/ata/pata_parport/aten.c | 2 ++ drivers/ata/pata_parport/bpck.c | 2 ++ drivers/ata/pata_parport/bpck6.c | 3 ++- drivers/ata/pata_parport/comm.c | 2 ++ drivers/ata/pata_parport/dstr.c | 2 ++ drivers/ata/pata_parport/epat.c | 3 +++ drivers/ata/pata_parport/epia.c | 3 +++ drivers/ata/pata_parport/fit2.c | 3 +++ drivers/ata/pata_parport/fit3.c | 3 +++ drivers/ata/pata_parport/friq.c | 2 ++ drivers/ata/pata_parport/frpw.c | 2 ++ drivers/ata/pata_parport/kbic.c | 3 +++ drivers/ata/pata_parport/ktti.c | 2 ++ drivers/ata/pata_parport/on20.c | 2 ++ drivers/ata/pata_parport/on26.c | 2 ++ 15 files changed, 35 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c index 8328a49a95ef..620ce6c8da5c 100644 --- a/drivers/ata/pata_parport/aten.c +++ b/drivers/ata/pata_parport/aten.c @@ -139,4 +139,6 @@ static struct pi_protocol aten = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("ATEN EH-100 parallel port IDE adapter protocol driver"); module_pata_parport_driver(aten); diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c index 9f4309f9b57f..bba1eda65f36 100644 --- a/drivers/ata/pata_parport/bpck.c +++ b/drivers/ata/pata_parport/bpck.c @@ -502,4 +502,6 @@ static struct pi_protocol bpck = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("MicroSolutions BACKPACK parallel port IDE adapter protocol driver"); module_pata_parport_driver(bpck); diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c index c6dbd14120d1..62c2b53325e1 100644 --- a/drivers/ata/pata_parport/bpck6.c +++ b/drivers/ata/pata_parport/bpck6.c @@ -459,5 +459,6 @@ static struct pi_protocol bpck6 = { MODULE_LICENSE("GPL"); MODULE_AUTHOR("Micro Solutions Inc."); -MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE"); +MODULE_DESCRIPTION("Micro Solutions BACKPACK parallel port IDE adapter " + "(version 6 drives) protocol driver"); module_pata_parport_driver(bpck6); diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c index cc5485bd0a5b..4839becbbd56 100644 --- a/drivers/ata/pata_parport/comm.c +++ b/drivers/ata/pata_parport/comm.c @@ -201,4 +201,6 @@ static struct pi_protocol comm = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("DataStor Commuter parallel port IDE adapter protocol driver"); module_pata_parport_driver(comm); diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c index 368d7c7962a9..88930bb1f07e 100644 --- a/drivers/ata/pata_parport/dstr.c +++ b/drivers/ata/pata_parport/dstr.c @@ -230,4 +230,6 @@ static struct pi_protocol dstr = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("DataStor EP2000 parallel port IDE adapter protocol driver"); module_pata_parport_driver(dstr); diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c index 016bd96bce89..3cb54fcbf0d0 100644 --- a/drivers/ata/pata_parport/epat.c +++ b/drivers/ata/pata_parport/epat.c @@ -358,5 +358,8 @@ static void __exit epat_exit(void) } MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Shuttle Technologies EPAT parallel port IDE adapter " + "protocol driver"); module_init(epat_init) module_exit(epat_exit) diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c index 920e9f40d401..7aaba474c671 100644 --- a/drivers/ata/pata_parport/epia.c +++ b/drivers/ata/pata_parport/epia.c @@ -306,4 +306,7 @@ static struct pi_protocol epia = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Shuttle Technologies EPIA parallel port IDE adapter " + "protocol driver"); module_pata_parport_driver(epia); diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c index 6524f3033b1e..de79cf91ad5f 100644 --- a/drivers/ata/pata_parport/fit2.c +++ b/drivers/ata/pata_parport/fit2.c @@ -132,4 +132,7 @@ static struct pi_protocol fit2 = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Fidelity International Technology parallel port IDE adapter" + "(older models) protocol driver"); module_pata_parport_driver(fit2); diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c index c172a38ae67d..bad7aa920cdc 100644 --- a/drivers/ata/pata_parport/fit3.c +++ b/drivers/ata/pata_parport/fit3.c @@ -193,4 +193,7 @@ static struct pi_protocol fit3 = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Fidelity International Technology parallel port IDE adapter" + "(newer models) protocol driver"); module_pata_parport_driver(fit3); diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c index dc428f54fe0c..7abe2ff40685 100644 --- a/drivers/ata/pata_parport/friq.c +++ b/drivers/ata/pata_parport/friq.c @@ -259,4 +259,6 @@ static struct pi_protocol friq = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Freecom IQ parallel port IDE adapter protocol driver"); module_pata_parport_driver(friq); diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c index 28d9bb2c6baf..7fa9b9857321 100644 --- a/drivers/ata/pata_parport/frpw.c +++ b/drivers/ata/pata_parport/frpw.c @@ -293,4 +293,6 @@ static struct pi_protocol frpw = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Freecom Power parallel port IDE adapter protocol driver"); module_pata_parport_driver(frpw); diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c index 6023e071516d..fca322627b82 100644 --- a/drivers/ata/pata_parport/kbic.c +++ b/drivers/ata/pata_parport/kbic.c @@ -301,5 +301,8 @@ static void __exit kbic_exit(void) } MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("KingByte Information Systems KBIC-951A and KBIC-971A " + "parallel port IDE adapter protocol driver"); module_init(kbic_init) module_exit(kbic_exit) diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c index bca6c20ef617..c078d1934862 100644 --- a/drivers/ata/pata_parport/ktti.c +++ b/drivers/ata/pata_parport/ktti.c @@ -106,4 +106,6 @@ static struct pi_protocol ktti = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("KT Technology parallel port IDE adapter protocol driver"); module_pata_parport_driver(ktti); diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c index 34e69da2bec8..7c70e5b13a2a 100644 --- a/drivers/ata/pata_parport/on20.c +++ b/drivers/ata/pata_parport/on20.c @@ -142,4 +142,6 @@ static struct pi_protocol on20 = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Onspec 90c20 parallel port IDE adapter protocol driver"); module_pata_parport_driver(on20); diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c index 5da317b394c1..c88e5d6f203e 100644 --- a/drivers/ata/pata_parport/on26.c +++ b/drivers/ata/pata_parport/on26.c @@ -310,4 +310,6 @@ static struct pi_protocol on26 = { }; MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Grant R. Guenther "); +MODULE_DESCRIPTION("Onspec 90c26 parallel port IDE adapter protocol driver"); module_pata_parport_driver(on26); -- cgit v1.2.3 From 4984eb51453ff7eddee9e5ce816145be39c0ec5c Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 11 Jul 2023 12:52:51 -0500 Subject: RDMA/irdma: Add missing read barriers On code inspection, there are many instances in the driver where CEQE and AEQE fields written to by HW are read without guaranteeing that the polarity bit has been read and checked first. Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields prior to checking the polarity bit. Fixes: 3f49d6842569 ("RDMA/irdma: Implement HW Admin Queue OPs") Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/ctrl.c | 9 ++++++++- drivers/infiniband/hw/irdma/puda.c | 6 ++++++ drivers/infiniband/hw/irdma/uk.c | 3 +++ 3 files changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/irdma/ctrl.c b/drivers/infiniband/hw/irdma/ctrl.c index d88c9184007e..c91439f428c7 100644 --- a/drivers/infiniband/hw/irdma/ctrl.c +++ b/drivers/infiniband/hw/irdma/ctrl.c @@ -3363,6 +3363,9 @@ int irdma_sc_ccq_get_cqe_info(struct irdma_sc_cq *ccq, if (polarity != ccq->cq_uk.polarity) return -ENOENT; + /* Ensure CEQE contents are read after valid bit is checked */ + dma_rmb(); + get_64bit_val(cqe, 8, &qp_ctx); cqp = (struct irdma_sc_cqp *)(unsigned long)qp_ctx; info->error = (bool)FIELD_GET(IRDMA_CQ_ERROR, temp); @@ -4009,13 +4012,17 @@ int irdma_sc_get_next_aeqe(struct irdma_sc_aeq *aeq, u8 polarity; aeqe = IRDMA_GET_CURRENT_AEQ_ELEM(aeq); - get_64bit_val(aeqe, 0, &compl_ctx); get_64bit_val(aeqe, 8, &temp); polarity = (u8)FIELD_GET(IRDMA_AEQE_VALID, temp); if (aeq->polarity != polarity) return -ENOENT; + /* Ensure AEQE contents are read after valid bit is checked */ + dma_rmb(); + + get_64bit_val(aeqe, 0, &compl_ctx); + print_hex_dump_debug("WQE: AEQ_ENTRY WQE", DUMP_PREFIX_OFFSET, 16, 8, aeqe, 16, false); diff --git a/drivers/infiniband/hw/irdma/puda.c b/drivers/infiniband/hw/irdma/puda.c index 4ec9639f1bdb..562531712ea4 100644 --- a/drivers/infiniband/hw/irdma/puda.c +++ b/drivers/infiniband/hw/irdma/puda.c @@ -230,6 +230,9 @@ static int irdma_puda_poll_info(struct irdma_sc_cq *cq, if (valid_bit != cq_uk->polarity) return -ENOENT; + /* Ensure CQE contents are read after valid bit is checked */ + dma_rmb(); + if (cq->dev->hw_attrs.uk_attrs.hw_rev >= IRDMA_GEN_2) ext_valid = (bool)FIELD_GET(IRDMA_CQ_EXTCQE, qword3); @@ -243,6 +246,9 @@ static int irdma_puda_poll_info(struct irdma_sc_cq *cq, if (polarity != cq_uk->polarity) return -ENOENT; + /* Ensure ext CQE contents are read after ext valid bit is checked */ + dma_rmb(); + IRDMA_RING_MOVE_HEAD_NOCHECK(cq_uk->cq_ring); if (!IRDMA_RING_CURRENT_HEAD(cq_uk->cq_ring)) cq_uk->polarity = !cq_uk->polarity; diff --git a/drivers/infiniband/hw/irdma/uk.c b/drivers/infiniband/hw/irdma/uk.c index dd428d915c17..ea2c07751245 100644 --- a/drivers/infiniband/hw/irdma/uk.c +++ b/drivers/infiniband/hw/irdma/uk.c @@ -1527,6 +1527,9 @@ void irdma_uk_clean_cq(void *q, struct irdma_cq_uk *cq) if (polarity != temp) break; + /* Ensure CQE contents are read after valid bit is checked */ + dma_rmb(); + get_64bit_val(cqe, 8, &comp_ctx); if ((void *)(unsigned long)comp_ctx == q) set_64bit_val(cqe, 8, 0); -- cgit v1.2.3 From f2c3037811381f9149243828c7eb9a1631df9f9c Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 11 Jul 2023 12:52:52 -0500 Subject: RDMA/irdma: Fix data race on CQP completion stats CQP completion statistics is read lockesly in irdma_wait_event and irdma_check_cqp_progress while it can be updated in the completion thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports. Make completion statistics an atomic variable to reflect coherent updates to it. This will also avoid load/store tearing logic bug potentially possible by compiler optimizations. [77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma] [77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4: [77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma] [77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma] [77346.171835] cqp_compl_worker+0x1b/0x20 [irdma] [77346.172009] process_one_work+0x4d1/0xa40 [77346.172024] worker_thread+0x319/0x700 [77346.172037] kthread+0x180/0x1b0 [77346.172054] ret_from_fork+0x22/0x30 [77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2: [77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma] [77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma] [77346.172592] irdma_create_aeq+0x390/0x45a [irdma] [77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma] [77346.172944] irdma_probe+0x54f/0x620 [irdma] [77346.173122] auxiliary_bus_probe+0x66/0xa0 [77346.173137] really_probe+0x140/0x540 [77346.173154] __driver_probe_device+0xc7/0x220 [77346.173173] driver_probe_device+0x5f/0x140 [77346.173190] __driver_attach+0xf0/0x2c0 [77346.173208] bus_for_each_dev+0xa8/0xf0 [77346.173225] driver_attach+0x29/0x30 [77346.173240] bus_add_driver+0x29c/0x2f0 [77346.173255] driver_register+0x10f/0x1a0 [77346.173272] __auxiliary_driver_register+0xbc/0x140 [77346.173287] irdma_init_module+0x55/0x1000 [irdma] [77346.173460] do_one_initcall+0x7d/0x410 [77346.173475] do_init_module+0x81/0x2c0 [77346.173491] load_module+0x1232/0x12c0 [77346.173506] __do_sys_finit_module+0x101/0x180 [77346.173522] __x64_sys_finit_module+0x3c/0x50 [77346.173538] do_syscall_64+0x39/0x90 [77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd [77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions") Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230711175253.1289-3-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/ctrl.c | 22 +++++++++--------- drivers/infiniband/hw/irdma/defs.h | 46 ++++++++++++++++++------------------- drivers/infiniband/hw/irdma/type.h | 2 ++ drivers/infiniband/hw/irdma/utils.c | 2 +- 4 files changed, 36 insertions(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/irdma/ctrl.c b/drivers/infiniband/hw/irdma/ctrl.c index c91439f428c7..45e3344daa04 100644 --- a/drivers/infiniband/hw/irdma/ctrl.c +++ b/drivers/infiniband/hw/irdma/ctrl.c @@ -2712,13 +2712,13 @@ static int irdma_sc_cq_modify(struct irdma_sc_cq *cq, */ void irdma_check_cqp_progress(struct irdma_cqp_timeout *timeout, struct irdma_sc_dev *dev) { - if (timeout->compl_cqp_cmds != dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]) { - timeout->compl_cqp_cmds = dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]; + u64 completed_ops = atomic64_read(&dev->cqp->completed_ops); + + if (timeout->compl_cqp_cmds != completed_ops) { + timeout->compl_cqp_cmds = completed_ops; timeout->count = 0; - } else { - if (dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS] != - timeout->compl_cqp_cmds) - timeout->count++; + } else if (timeout->compl_cqp_cmds != dev->cqp->requested_ops) { + timeout->count++; } } @@ -2761,7 +2761,7 @@ static int irdma_cqp_poll_registers(struct irdma_sc_cqp *cqp, u32 tail, if (newtail != tail) { /* SUCCESS */ IRDMA_RING_MOVE_TAIL(cqp->sq_ring); - cqp->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]++; + atomic64_inc(&cqp->completed_ops); return 0; } udelay(cqp->dev->hw_attrs.max_sleep_count); @@ -3121,8 +3121,8 @@ int irdma_sc_cqp_init(struct irdma_sc_cqp *cqp, info->dev->cqp = cqp; IRDMA_RING_INIT(cqp->sq_ring, cqp->sq_size); - cqp->dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS] = 0; - cqp->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS] = 0; + cqp->requested_ops = 0; + atomic64_set(&cqp->completed_ops, 0); /* for the cqp commands backlog. */ INIT_LIST_HEAD(&cqp->dev->cqp_cmd_head); @@ -3274,7 +3274,7 @@ __le64 *irdma_sc_cqp_get_next_send_wqe_idx(struct irdma_sc_cqp *cqp, u64 scratch if (ret_code) return NULL; - cqp->dev->cqp_cmd_stats[IRDMA_OP_REQ_CMDS]++; + cqp->requested_ops++; if (!*wqe_idx) cqp->polarity = !cqp->polarity; wqe = cqp->sq_base[*wqe_idx].elem; @@ -3400,7 +3400,7 @@ int irdma_sc_ccq_get_cqe_info(struct irdma_sc_cq *ccq, dma_wmb(); /* make sure shadow area is updated before moving tail */ IRDMA_RING_MOVE_TAIL(cqp->sq_ring); - ccq->dev->cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]++; + atomic64_inc(&cqp->completed_ops); return ret_code; } diff --git a/drivers/infiniband/hw/irdma/defs.h b/drivers/infiniband/hw/irdma/defs.h index 6014b9d06a9b..d06e45d2c23f 100644 --- a/drivers/infiniband/hw/irdma/defs.h +++ b/drivers/infiniband/hw/irdma/defs.h @@ -191,32 +191,30 @@ enum irdma_cqp_op_type { IRDMA_OP_MANAGE_VF_PBLE_BP = 25, IRDMA_OP_QUERY_FPM_VAL = 26, IRDMA_OP_COMMIT_FPM_VAL = 27, - IRDMA_OP_REQ_CMDS = 28, - IRDMA_OP_CMPL_CMDS = 29, - IRDMA_OP_AH_CREATE = 30, - IRDMA_OP_AH_MODIFY = 31, - IRDMA_OP_AH_DESTROY = 32, - IRDMA_OP_MC_CREATE = 33, - IRDMA_OP_MC_DESTROY = 34, - IRDMA_OP_MC_MODIFY = 35, - IRDMA_OP_STATS_ALLOCATE = 36, - IRDMA_OP_STATS_FREE = 37, - IRDMA_OP_STATS_GATHER = 38, - IRDMA_OP_WS_ADD_NODE = 39, - IRDMA_OP_WS_MODIFY_NODE = 40, - IRDMA_OP_WS_DELETE_NODE = 41, - IRDMA_OP_WS_FAILOVER_START = 42, - IRDMA_OP_WS_FAILOVER_COMPLETE = 43, - IRDMA_OP_SET_UP_MAP = 44, - IRDMA_OP_GEN_AE = 45, - IRDMA_OP_QUERY_RDMA_FEATURES = 46, - IRDMA_OP_ALLOC_LOCAL_MAC_ENTRY = 47, - IRDMA_OP_ADD_LOCAL_MAC_ENTRY = 48, - IRDMA_OP_DELETE_LOCAL_MAC_ENTRY = 49, - IRDMA_OP_CQ_MODIFY = 50, + IRDMA_OP_AH_CREATE = 28, + IRDMA_OP_AH_MODIFY = 29, + IRDMA_OP_AH_DESTROY = 30, + IRDMA_OP_MC_CREATE = 31, + IRDMA_OP_MC_DESTROY = 32, + IRDMA_OP_MC_MODIFY = 33, + IRDMA_OP_STATS_ALLOCATE = 34, + IRDMA_OP_STATS_FREE = 35, + IRDMA_OP_STATS_GATHER = 36, + IRDMA_OP_WS_ADD_NODE = 37, + IRDMA_OP_WS_MODIFY_NODE = 38, + IRDMA_OP_WS_DELETE_NODE = 39, + IRDMA_OP_WS_FAILOVER_START = 40, + IRDMA_OP_WS_FAILOVER_COMPLETE = 41, + IRDMA_OP_SET_UP_MAP = 42, + IRDMA_OP_GEN_AE = 43, + IRDMA_OP_QUERY_RDMA_FEATURES = 44, + IRDMA_OP_ALLOC_LOCAL_MAC_ENTRY = 45, + IRDMA_OP_ADD_LOCAL_MAC_ENTRY = 46, + IRDMA_OP_DELETE_LOCAL_MAC_ENTRY = 47, + IRDMA_OP_CQ_MODIFY = 48, /* Must be last entry*/ - IRDMA_MAX_CQP_OPS = 51, + IRDMA_MAX_CQP_OPS = 49, }; /* CQP SQ WQES */ diff --git a/drivers/infiniband/hw/irdma/type.h b/drivers/infiniband/hw/irdma/type.h index 5ee68604e59f..a20709577ab0 100644 --- a/drivers/infiniband/hw/irdma/type.h +++ b/drivers/infiniband/hw/irdma/type.h @@ -365,6 +365,8 @@ struct irdma_sc_cqp { struct irdma_dcqcn_cc_params dcqcn_params; __le64 *host_ctx; u64 *scratch_array; + u64 requested_ops; + atomic64_t completed_ops; u32 cqp_id; u32 sq_size; u32 hw_sq_size; diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c index 71e1c5d34709..775a79946f7d 100644 --- a/drivers/infiniband/hw/irdma/utils.c +++ b/drivers/infiniband/hw/irdma/utils.c @@ -567,7 +567,7 @@ static int irdma_wait_event(struct irdma_pci_f *rf, bool cqp_error = false; int err_code = 0; - cqp_timeout.compl_cqp_cmds = rf->sc_dev.cqp_cmd_stats[IRDMA_OP_CMPL_CMDS]; + cqp_timeout.compl_cqp_cmds = atomic64_read(&rf->sc_dev.cqp->completed_ops); do { irdma_cqp_ce_handler(rf, &rf->ccq.sc_cq); if (wait_event_timeout(cqp_request->waitq, -- cgit v1.2.3 From f0842bb3d38863777e3454da5653d80b5fde6321 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 11 Jul 2023 12:52:53 -0500 Subject: RDMA/irdma: Fix data race on CQP request done KCSAN detects a data race on cqp_request->request_done memory location which is accessed locklessly in irdma_handle_cqp_op while being updated in irdma_cqp_ce_handler. Annotate lockless intent with READ_ONCE/WRITE_ONCE to avoid any compiler optimizations like load fusing and/or KCSAN warning. [222808.417128] BUG: KCSAN: data-race in irdma_cqp_ce_handler [irdma] / irdma_wait_event [irdma] [222808.417532] write to 0xffff8e44107019dc of 1 bytes by task 29658 on cpu 5: [222808.417610] irdma_cqp_ce_handler+0x21e/0x270 [irdma] [222808.417725] cqp_compl_worker+0x1b/0x20 [irdma] [222808.417827] process_one_work+0x4d1/0xa40 [222808.417835] worker_thread+0x319/0x700 [222808.417842] kthread+0x180/0x1b0 [222808.417852] ret_from_fork+0x22/0x30 [222808.417918] read to 0xffff8e44107019dc of 1 bytes by task 29688 on cpu 1: [222808.417995] irdma_wait_event+0x1e2/0x2c0 [irdma] [222808.418099] irdma_handle_cqp_op+0xae/0x170 [irdma] [222808.418202] irdma_cqp_cq_destroy_cmd+0x70/0x90 [irdma] [222808.418308] irdma_puda_dele_rsrc+0x46d/0x4d0 [irdma] [222808.418411] irdma_rt_deinit_hw+0x179/0x1d0 [irdma] [222808.418514] irdma_ib_dealloc_device+0x11/0x40 [irdma] [222808.418618] ib_dealloc_device+0x2a/0x120 [ib_core] [222808.418823] __ib_unregister_device+0xde/0x100 [ib_core] [222808.418981] ib_unregister_device+0x22/0x40 [ib_core] [222808.419142] irdma_ib_unregister_device+0x70/0x90 [irdma] [222808.419248] i40iw_close+0x6f/0xc0 [irdma] [222808.419352] i40e_client_device_unregister+0x14a/0x180 [i40e] [222808.419450] i40iw_remove+0x21/0x30 [irdma] [222808.419554] auxiliary_bus_remove+0x31/0x50 [222808.419563] device_remove+0x69/0xb0 [222808.419572] device_release_driver_internal+0x293/0x360 [222808.419582] driver_detach+0x7c/0xf0 [222808.419592] bus_remove_driver+0x8c/0x150 [222808.419600] driver_unregister+0x45/0x70 [222808.419610] auxiliary_driver_unregister+0x16/0x30 [222808.419618] irdma_exit_module+0x18/0x1e [irdma] [222808.419733] __do_sys_delete_module.constprop.0+0x1e2/0x310 [222808.419745] __x64_sys_delete_module+0x1b/0x30 [222808.419755] do_syscall_64+0x39/0x90 [222808.419763] entry_SYSCALL_64_after_hwframe+0x63/0xcd [222808.419829] value changed: 0x01 -> 0x03 Fixes: 915cc7ac0f8e ("RDMA/irdma: Add miscellaneous utility definitions") Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230711175253.1289-4-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/irdma/hw.c | 2 +- drivers/infiniband/hw/irdma/main.h | 2 +- drivers/infiniband/hw/irdma/utils.c | 6 +++--- 3 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 795f7fd4f257..1cfc03da89e7 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -2075,7 +2075,7 @@ void irdma_cqp_ce_handler(struct irdma_pci_f *rf, struct irdma_sc_cq *cq) cqp_request->compl_info.error = info.error; if (cqp_request->waiting) { - cqp_request->request_done = true; + WRITE_ONCE(cqp_request->request_done, true); wake_up(&cqp_request->waitq); irdma_put_cqp_request(&rf->cqp, cqp_request); } else { diff --git a/drivers/infiniband/hw/irdma/main.h b/drivers/infiniband/hw/irdma/main.h index def6dd58dcd4..2323962cdeac 100644 --- a/drivers/infiniband/hw/irdma/main.h +++ b/drivers/infiniband/hw/irdma/main.h @@ -161,8 +161,8 @@ struct irdma_cqp_request { void (*callback_fcn)(struct irdma_cqp_request *cqp_request); void *param; struct irdma_cqp_compl_info compl_info; + bool request_done; /* READ/WRITE_ONCE macros operate on it */ bool waiting:1; - bool request_done:1; bool dynamic:1; }; diff --git a/drivers/infiniband/hw/irdma/utils.c b/drivers/infiniband/hw/irdma/utils.c index 775a79946f7d..eb083f70b09f 100644 --- a/drivers/infiniband/hw/irdma/utils.c +++ b/drivers/infiniband/hw/irdma/utils.c @@ -481,7 +481,7 @@ void irdma_free_cqp_request(struct irdma_cqp *cqp, if (cqp_request->dynamic) { kfree(cqp_request); } else { - cqp_request->request_done = false; + WRITE_ONCE(cqp_request->request_done, false); cqp_request->callback_fcn = NULL; cqp_request->waiting = false; @@ -515,7 +515,7 @@ irdma_free_pending_cqp_request(struct irdma_cqp *cqp, { if (cqp_request->waiting) { cqp_request->compl_info.error = true; - cqp_request->request_done = true; + WRITE_ONCE(cqp_request->request_done, true); wake_up(&cqp_request->waitq); } wait_event_timeout(cqp->remove_wq, @@ -571,7 +571,7 @@ static int irdma_wait_event(struct irdma_pci_f *rf, do { irdma_cqp_ce_handler(rf, &rf->ccq.sc_cq); if (wait_event_timeout(cqp_request->waitq, - cqp_request->request_done, + READ_ONCE(cqp_request->request_done), msecs_to_jiffies(CQP_COMPL_WAIT_TIME_MS))) break; -- cgit v1.2.3 From 0e15863015d97c1ee2cc29d599abcc7fa2dc3e95 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Wed, 12 Jul 2023 18:41:33 -0500 Subject: RDMA/core: Update CMA destination address on rdma_resolve_addr 8d037973d48c ("RDMA/core: Refactor rdma_bind_addr") intoduces as regression on irdma devices on certain tests which uses rdma CM, such as cmtime. No connections can be established with the MAD QP experiences a fatal error on the active side. The cma destination address is not updated with the dst_addr when ULP on active side calls rdma_bind_addr followed by rdma_resolve_addr. The id_priv state is 'bound' in resolve_prepare_src and update is skipped. This leaves the dgid passed into irdma driver to create an Address Handle (AH) for the MAD QP at 0. The create AH descriptor as well as the ARP cache entry is invalid and HW throws an asynchronous events as result. [ 1207.656888] resolve_prepare_src caller: ucma_resolve_addr+0xff/0x170 [rdma_ucm] daddr=200.0.4.28 id_priv->state=7 [....] [ 1207.680362] ice 0000:07:00.1 rocep7s0f1: caller: irdma_create_ah+0x3e/0x70 [irdma] ah_id=0 arp_idx=0 dest_ip=0.0.0.0 destMAC=00:00:64:ca:b7:52 ipvalid=1 raw=0000:0000:0000:0000:0000:ffff:0000:0000 [ 1207.682077] ice 0000:07:00.1 rocep7s0f1: abnormal ae_id = 0x401 bool qp=1 qp_id = 1, ae_src=5 [ 1207.691657] infiniband rocep7s0f1: Fatal error (1) on MAD QP (1) Fix this by updating the CMA destination address when the ULP calls a resolve address with the CM state already bound. Fixes: 8d037973d48c ("RDMA/core: Refactor rdma_bind_addr") Signed-off-by: Shiraz Saleem Link: https://lore.kernel.org/r/20230712234133.1343-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/core/cma.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 1ee87c3aaeab..9891c7dc2af5 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -4062,6 +4062,8 @@ static int resolve_prepare_src(struct rdma_id_private *id_priv, RDMA_CM_ADDR_QUERY))) return -EINVAL; + } else { + memcpy(cma_dst_addr(id_priv), dst_addr, rdma_addr_size(dst_addr)); } if (cma_family(id_priv) != dst_addr->sa_family) { -- cgit v1.2.3 From dc52aadbc1849cbe3fcf6bc54d35f6baa396e0a1 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 13 Jul 2023 16:16:58 +0200 Subject: RDMA/mthca: Fix crash when polling CQ for shared QPs Commit 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP") introduced a new struct mthca_sqp which doesn't contain struct mthca_qp any longer. Placing a pointer of this new struct into qptable leads to crashes, because mthca_poll_one() expects a qp pointer. Fix this by putting the correct pointer into qptable. Fixes: 21c2fe94abb2 ("RDMA/mthca: Combine special QP struct with mthca QP") Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/mthca/mthca_qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 69bba0ef4a5d..53f43649f7d0 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1393,7 +1393,7 @@ int mthca_alloc_sqp(struct mthca_dev *dev, if (mthca_array_get(&dev->qp_table.qp, mqpn)) err = -EBUSY; else - mthca_array_set(&dev->qp_table.qp, mqpn, qp->sqp); + mthca_array_set(&dev->qp_table.qp, mqpn, qp); spin_unlock_irq(&dev->qp_table.lock); if (err) -- cgit v1.2.3 From b5bbc6551297447d3cca55cf907079e206e9cd82 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Fri, 14 Jul 2023 01:22:48 -0700 Subject: RDMA/bnxt_re: Prevent handling any completions after qp destroy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HW may generate completions that indicates QP is destroyed. Driver should not be scheduling any more completion handlers for this QP, after the QP is destroyed. Since CQs are active during the QP destroy, driver may still schedule completion handlers. This can cause a race where the destroy_cq and poll_cq running simultaneously. Snippet of kernel panic while doing bnxt_re driver load unload in loop. This indicates a poll after the CQ is freed.  [77786.481636] Call Trace: [77786.481640]   [77786.481644]  bnxt_re_poll_cq+0x14a/0x620 [bnxt_re] [77786.481658]  ? kvm_clock_read+0x14/0x30 [77786.481693]  __ib_process_cq+0x57/0x190 [ib_core] [77786.481728]  ib_cq_poll_work+0x26/0x80 [ib_core] [77786.481761]  process_one_work+0x1e5/0x3f0 [77786.481768]  worker_thread+0x50/0x3a0 [77786.481785]  ? __pfx_worker_thread+0x10/0x10 [77786.481790]  kthread+0xe2/0x110 [77786.481794]  ? __pfx_kthread+0x10/0x10 [77786.481797]  ret_from_fork+0x2c/0x50 To avoid this, complete all completion handlers before returning the destroy QP. If free_cq is called soon after destroy_qp, IB stack will cancel the CQ work before invoking the destroy_cq verb and this will prevent any race mentioned. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kashyap Desai Signed-off-by: Selvin Xavier Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 ++++++++++++ drivers/infiniband/hw/bnxt_re/qplib_fp.c | 18 ++++++++++++++++++ drivers/infiniband/hw/bnxt_re/qplib_fp.h | 1 + 3 files changed, 31 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index abef0b8baa7c..03cc45a5458d 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -869,7 +869,10 @@ fail: int bnxt_re_destroy_qp(struct ib_qp *ib_qp, struct ib_udata *udata) { struct bnxt_re_qp *qp = container_of(ib_qp, struct bnxt_re_qp, ib_qp); + struct bnxt_qplib_qp *qplib_qp = &qp->qplib_qp; struct bnxt_re_dev *rdev = qp->rdev; + struct bnxt_qplib_nq *scq_nq = NULL; + struct bnxt_qplib_nq *rcq_nq = NULL; unsigned int flags; int rc; @@ -903,6 +906,15 @@ int bnxt_re_destroy_qp(struct ib_qp *ib_qp, struct ib_udata *udata) ib_umem_release(qp->rumem); ib_umem_release(qp->sumem); + /* Flush all the entries of notification queue associated with + * given qp. + */ + scq_nq = qplib_qp->scq->nq; + rcq_nq = qplib_qp->rcq->nq; + bnxt_re_synchronize_nq(scq_nq); + if (scq_nq != rcq_nq) + bnxt_re_synchronize_nq(rcq_nq); + return 0; } diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index 91aed77ce40d..a12c7ade101a 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -381,6 +381,24 @@ static void bnxt_qplib_service_nq(struct tasklet_struct *t) spin_unlock_bh(&hwq->lock); } +/* bnxt_re_synchronize_nq - self polling notification queue. + * @nq - notification queue pointer + * + * This function will start polling entries of a given notification queue + * for all pending entries. + * This function is useful to synchronize notification entries while resources + * are going away. + */ + +void bnxt_re_synchronize_nq(struct bnxt_qplib_nq *nq) +{ + int budget = nq->budget; + + nq->budget = nq->hwq.max_elements; + bnxt_qplib_service_nq(&nq->nq_tasklet); + nq->budget = budget; +} + static irqreturn_t bnxt_qplib_nq_irq(int irq, void *dev_instance) { struct bnxt_qplib_nq *nq = dev_instance; diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.h b/drivers/infiniband/hw/bnxt_re/qplib_fp.h index a42820821c47..404b851091ca 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.h @@ -553,6 +553,7 @@ int bnxt_qplib_process_flush_list(struct bnxt_qplib_cq *cq, struct bnxt_qplib_cqe *cqe, int num_cqes); void bnxt_qplib_flush_cqn_wq(struct bnxt_qplib_qp *qp); +void bnxt_re_synchronize_nq(struct bnxt_qplib_nq *nq); static inline void *bnxt_qplib_get_swqe(struct bnxt_qplib_q *que, u32 *swq_idx) { -- cgit v1.2.3 From 29900bf351e1a7e4643da5c3c3cd9df75c577b88 Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Fri, 14 Jul 2023 01:22:49 -0700 Subject: RDMA/bnxt_re: Fix hang during driver unload Driver unload hits a hang during stress testing of load/unload. stack trace snippet - tasklet_kill at ffffffff9aabb8b2 bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re] bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re] bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re] bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re] tasklet_kill can hang if the tasklet is scheduled after it is disabled. Modified the sequences to disable the interrupt first and synchronize irq before disabling the tasklet. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Kashyap Desai Signed-off-by: Selvin Xavier Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 10 +++++----- drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 9 ++++----- 2 files changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index a12c7ade101a..a42555623aed 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -420,19 +420,19 @@ void bnxt_qplib_nq_stop_irq(struct bnxt_qplib_nq *nq, bool kill) if (!nq->requested) return; - tasklet_disable(&nq->nq_tasklet); + nq->requested = false; /* Mask h/w interrupt */ bnxt_qplib_ring_nq_db(&nq->nq_db.dbinfo, nq->res->cctx, false); /* Sync with last running IRQ handler */ synchronize_irq(nq->msix_vec); - if (kill) - tasklet_kill(&nq->nq_tasklet); - irq_set_affinity_hint(nq->msix_vec, NULL); free_irq(nq->msix_vec, nq); kfree(nq->name); nq->name = NULL; - nq->requested = false; + + if (kill) + tasklet_kill(&nq->nq_tasklet); + tasklet_disable(&nq->nq_tasklet); } void bnxt_qplib_disable_nq(struct bnxt_qplib_nq *nq) diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c index b30e66b64827..bc3aea4592b9 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c @@ -989,19 +989,18 @@ void bnxt_qplib_rcfw_stop_irq(struct bnxt_qplib_rcfw *rcfw, bool kill) if (!creq->requested) return; - tasklet_disable(&creq->creq_tasklet); + creq->requested = false; /* Mask h/w interrupts */ bnxt_qplib_ring_nq_db(&creq->creq_db.dbinfo, rcfw->res->cctx, false); /* Sync with last running IRQ-handler */ synchronize_irq(creq->msix_vec); - if (kill) - tasklet_kill(&creq->creq_tasklet); - free_irq(creq->msix_vec, rcfw); kfree(creq->irq_name); creq->irq_name = NULL; - creq->requested = false; atomic_set(&rcfw->rcfw_intr_enabled, 0); + if (kill) + tasklet_kill(&creq->creq_tasklet); + tasklet_disable(&creq->creq_tasklet); } void bnxt_qplib_disable_rcfw_channel(struct bnxt_qplib_rcfw *rcfw) -- cgit v1.2.3 From bc64734825c59e18a27ac266b07e14944c111fd8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Jul 2023 12:16:39 +0100 Subject: regmap: Drop initial version of maximum transfer length fixes When problems were noticed with the register address not being taken into account when limiting raw transfers with I2C devices we fixed this in the core. Unfortunately it has subsequently been realised that a lot of buses were relying on the prior behaviour, partly due to unclear documentation not making it obvious what was intended in the core. This is all more involved to fix than is sensible for a fix commit so let's just drop the original fixes, a separate commit will fix the originally observed problem in an I2C specific way Fixes: 3981514180c9 ("regmap: Account for register length when chunking") Fixes: c8e796895e23 ("regmap: spi-avmm: Fix regmap_bus max_raw_write") Signed-off-by: Mark Brown Reviewed-by: Xu Yilun Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-spi-avmm.c | 2 +- drivers/base/regmap/regmap.c | 6 ++---- 2 files changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap-spi-avmm.c b/drivers/base/regmap/regmap-spi-avmm.c index 6af692844c19..4c2b94b3e30b 100644 --- a/drivers/base/regmap/regmap-spi-avmm.c +++ b/drivers/base/regmap/regmap-spi-avmm.c @@ -660,7 +660,7 @@ static const struct regmap_bus regmap_spi_avmm_bus = { .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, .val_format_endian_default = REGMAP_ENDIAN_NATIVE, .max_raw_read = SPI_AVMM_VAL_SIZE * MAX_READ_CNT, - .max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT, + .max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT, .free_context = spi_avmm_bridge_ctx_free, }; diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index 89a7f1c459c1..1bfd1727b4da 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2082,8 +2082,6 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg, size_t val_count = val_len / val_bytes; size_t chunk_count, chunk_bytes; size_t chunk_regs = val_count; - size_t max_data = map->max_raw_write - map->format.reg_bytes - - map->format.pad_bytes; int ret, i; if (!val_count) @@ -2091,8 +2089,8 @@ int _regmap_raw_write(struct regmap *map, unsigned int reg, if (map->use_single_write) chunk_regs = 1; - else if (map->max_raw_write && val_len > max_data) - chunk_regs = max_data / val_bytes; + else if (map->max_raw_write && val_len > map->max_raw_write) + chunk_regs = map->max_raw_write / val_bytes; chunk_count = val_count / chunk_regs; chunk_bytes = chunk_regs * val_bytes; -- cgit v1.2.3 From 0c9d2eb5e94792fe64019008a04d4df5e57625af Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Jul 2023 12:16:40 +0100 Subject: regmap: Account for register length in SMBus I/O limits The SMBus I2C buses have limits on the size of transfers they can do but do not factor in the register length meaning we may try to do a transfer longer than our length limit, the core will not take care of this. Future changes will factor this out into the core but there are a number of users that assume current behaviour so let's just do something conservative here. This does not take account padding bits but practically speaking these are very rarely if ever used on I2C buses given that they generally run slowly enough to mean there's no issue. Cc: stable@kernel.org Signed-off-by: Mark Brown Reviewed-by: Xu Yilun Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org Signed-off-by: Mark Brown --- drivers/base/regmap/regmap-i2c.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c index 980e5ce6a3a3..3ec611dc0c09 100644 --- a/drivers/base/regmap/regmap-i2c.c +++ b/drivers/base/regmap/regmap-i2c.c @@ -242,8 +242,8 @@ static int regmap_i2c_smbus_i2c_read(void *context, const void *reg, static const struct regmap_bus regmap_i2c_smbus_i2c_block = { .write = regmap_i2c_smbus_i2c_write, .read = regmap_i2c_smbus_i2c_read, - .max_raw_read = I2C_SMBUS_BLOCK_MAX, - .max_raw_write = I2C_SMBUS_BLOCK_MAX, + .max_raw_read = I2C_SMBUS_BLOCK_MAX - 1, + .max_raw_write = I2C_SMBUS_BLOCK_MAX - 1, }; static int regmap_i2c_smbus_i2c_write_reg16(void *context, const void *data, @@ -299,8 +299,8 @@ static int regmap_i2c_smbus_i2c_read_reg16(void *context, const void *reg, static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = { .write = regmap_i2c_smbus_i2c_write_reg16, .read = regmap_i2c_smbus_i2c_read_reg16, - .max_raw_read = I2C_SMBUS_BLOCK_MAX, - .max_raw_write = I2C_SMBUS_BLOCK_MAX, + .max_raw_read = I2C_SMBUS_BLOCK_MAX - 2, + .max_raw_write = I2C_SMBUS_BLOCK_MAX - 2, }; static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c, -- cgit v1.2.3 From 98e2dd5f7a8be5cb2501a897e96910393a49f0ff Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 16 Jun 2023 16:36:28 +0200 Subject: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case. Fixes: b8717a80e6ee ("regulator: da9063: implement setter for voltage monitoring") Signed-off-by: Martin Fuzzey Link: https://lore.kernel.org/r/20230616143736.2946173-1-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown --- drivers/regulator/da9063-regulator.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c index c5dd77be558b..dfd5ec9f75c9 100644 --- a/drivers/regulator/da9063-regulator.c +++ b/drivers/regulator/da9063-regulator.c @@ -778,6 +778,9 @@ static int da9063_check_xvp_constraints(struct regulator_config *config) const struct notification_limit *uv_l = &constr->under_voltage_limits; const struct notification_limit *ov_l = &constr->over_voltage_limits; + if (!config->init_data) /* No config in DT, pointers will be invalid */ + return 0; + /* make sure that only one severity is used to clarify if unchanged, enabled or disabled */ if ((!!uv_l->prot + !!uv_l->err + !!uv_l->warn) > 1) { dev_err(config->dev, "%s: at most one voltage monitoring severity allowed!\n", -- cgit v1.2.3 From 4bdf79d686b49ac49373b36466acfb93972c7d7c Mon Sep 17 00:00:00 2001 From: Tristram Ha Date: Thu, 13 Jul 2023 17:46:22 -0700 Subject: net: dsa: microchip: correct KSZ8795 static MAC table access The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha Reviewed-by: Horatiu Vultur Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/dsa/microchip/ksz8795.c | 8 +++++++- drivers/net/dsa/microchip/ksz_common.c | 8 ++++---- drivers/net/dsa/microchip/ksz_common.h | 7 +++++++ 3 files changed, 18 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index 84d502589f8e..91aba470fb2f 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -506,7 +506,13 @@ static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, (data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >> shifts[STATIC_MAC_FWD_PORTS]; alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; - data_hi >>= 1; + + /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the + * static MAC table compared to doing write. + */ + if (ksz_is_ksz87xx(dev)) + data_hi >>= 1; alu->is_static = true; alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >> diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 813b91a816bb..b18cd170ec06 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -331,13 +331,13 @@ static const u32 ksz8795_masks[] = { [STATIC_MAC_TABLE_VALID] = BIT(21), [STATIC_MAC_TABLE_USE_FID] = BIT(23), [STATIC_MAC_TABLE_FID] = GENMASK(30, 24), - [STATIC_MAC_TABLE_OVERRIDE] = BIT(26), - [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(24, 20), + [STATIC_MAC_TABLE_OVERRIDE] = BIT(22), + [STATIC_MAC_TABLE_FWD_PORTS] = GENMASK(20, 16), [DYNAMIC_MAC_TABLE_ENTRIES_H] = GENMASK(6, 0), - [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(8), + [DYNAMIC_MAC_TABLE_MAC_EMPTY] = BIT(7), [DYNAMIC_MAC_TABLE_NOT_READY] = BIT(7), [DYNAMIC_MAC_TABLE_ENTRIES] = GENMASK(31, 29), - [DYNAMIC_MAC_TABLE_FID] = GENMASK(26, 20), + [DYNAMIC_MAC_TABLE_FID] = GENMASK(22, 16), [DYNAMIC_MAC_TABLE_SRC_PORT] = GENMASK(26, 24), [DYNAMIC_MAC_TABLE_TIMESTAMP] = GENMASK(28, 27), [P_MII_TX_FLOW_CTRL] = BIT(5), diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index 28444e5924f9..a4de58847dea 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -601,6 +601,13 @@ static inline void ksz_regmap_unlock(void *__mtx) mutex_unlock(mtx); } +static inline bool ksz_is_ksz87xx(struct ksz_device *dev) +{ + return dev->chip_id == KSZ8795_CHIP_ID || + dev->chip_id == KSZ8794_CHIP_ID || + dev->chip_id == KSZ8765_CHIP_ID; +} + static inline bool ksz_is_ksz88x3(struct ksz_device *dev) { return dev->chip_id == KSZ8830_CHIP_ID; -- cgit v1.2.3 From 162d626f3013215b82b6514ca14f20932c7ccce5 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Fri, 14 Jul 2023 07:39:36 +0200 Subject: r8169: fix ASPM-related problem for chip version 42 and 43 Referenced commit missed that for chip versions 42 and 43 ASPM remained disabled in the respective rtl_hw_start_...() routines. This resulted in problems as described in the referenced bug ticket. Therefore re-instantiate the previous logic. Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635 Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 9445f04f8d48..fce4a2b908c2 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -2747,6 +2747,13 @@ static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable) return; if (enable) { + /* On these chip versions ASPM can even harm + * bus communication of other PCI devices. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_42 || + tp->mac_version == RTL_GIGA_MAC_VER_43) + return; + rtl_mod_config5(tp, 0, ASPM_en); rtl_mod_config2(tp, 0, ClkReqEn); -- cgit v1.2.3 From 2603be9e8167ddc7bea95dcfab9ffc33414215aa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 7 Jul 2023 13:43:10 +0200 Subject: can: gs_usb: gs_can_open(): improve error handling The gs_usb driver handles USB devices with more than 1 CAN channel. The RX path for all channels share the same bulk endpoint (the transmitted bulk data encodes the channel number). These per-device resources are allocated and submitted by the first opened channel. During this allocation, the resources are either released immediately in case of a failure or the URBs are anchored. All anchored URBs are finally killed with gs_usb_disconnect(). Currently, gs_can_open() returns with an error if the allocation of a URB or a buffer fails. However, if usb_submit_urb() fails, the driver continues with the URBs submitted so far, even if no URBs were successfully submitted. Treat every error as fatal and free all allocated resources immediately. Switch to goto-style error handling, to prepare the driver for more per-device resource allocation. Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/gs_usb.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index d476c2884008..85b7b59c8426 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -833,6 +833,7 @@ static int gs_can_open(struct net_device *netdev) .mode = cpu_to_le32(GS_CAN_MODE_START), }; struct gs_host_frame *hf; + struct urb *urb = NULL; u32 ctrlmode; u32 flags = 0; int rc, i; @@ -856,13 +857,14 @@ static int gs_can_open(struct net_device *netdev) if (!parent->active_channels) { for (i = 0; i < GS_MAX_RX_URBS; i++) { - struct urb *urb; u8 *buf; /* alloc rx urb */ urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return -ENOMEM; + if (!urb) { + rc = -ENOMEM; + goto out_usb_kill_anchored_urbs; + } /* alloc rx buffer */ buf = kmalloc(dev->parent->hf_size_rx, @@ -870,8 +872,8 @@ static int gs_can_open(struct net_device *netdev) if (!buf) { netdev_err(netdev, "No memory left for USB buffer\n"); - usb_free_urb(urb); - return -ENOMEM; + rc = -ENOMEM; + goto out_usb_free_urb; } /* fill, anchor, and submit rx urb */ @@ -894,9 +896,7 @@ static int gs_can_open(struct net_device *netdev) netdev_err(netdev, "usb_submit failed (err=%d)\n", rc); - usb_unanchor_urb(urb); - usb_free_urb(urb); - break; + goto out_usb_unanchor_urb; } /* Drop reference, @@ -945,7 +945,8 @@ static int gs_can_open(struct net_device *netdev) if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) gs_usb_timestamp_stop(dev); dev->can.state = CAN_STATE_STOPPED; - return rc; + + goto out_usb_kill_anchored_urbs; } parent->active_channels++; @@ -953,6 +954,18 @@ static int gs_can_open(struct net_device *netdev) netif_start_queue(netdev); return 0; + +out_usb_unanchor_urb: + usb_unanchor_urb(urb); +out_usb_free_urb: + usb_free_urb(urb); +out_usb_kill_anchored_urbs: + if (!parent->active_channels) + usb_kill_anchored_urbs(&dev->tx_submitted); + + close_candev(netdev); + + return rc; } static int gs_usb_get_state(const struct net_device *netdev, -- cgit v1.2.3 From 5886e4d5ecec3e22844efed90b2dd383ef804b3a Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Fri, 7 Jul 2023 18:44:23 +0200 Subject: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076 Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/gs_usb.c | 101 +++++++++++++++++++++++-------------------- 1 file changed, 53 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 85b7b59c8426..f418066569fc 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -303,12 +303,6 @@ struct gs_can { struct can_bittiming_const bt_const, data_bt_const; unsigned int channel; /* channel number */ - /* time counter for hardware timestamps */ - struct cyclecounter cc; - struct timecounter tc; - spinlock_t tc_lock; /* spinlock to guard access tc->cycle_last */ - struct delayed_work timestamp; - u32 feature; unsigned int hf_size_tx; @@ -325,6 +319,13 @@ struct gs_usb { struct gs_can *canch[GS_MAX_INTF]; struct usb_anchor rx_submitted; struct usb_device *udev; + + /* time counter for hardware timestamps */ + struct cyclecounter cc; + struct timecounter tc; + spinlock_t tc_lock; /* spinlock to guard access tc->cycle_last */ + struct delayed_work timestamp; + unsigned int hf_size_rx; u8 active_channels; }; @@ -388,15 +389,15 @@ static int gs_cmd_reset(struct gs_can *dev) GFP_KERNEL); } -static inline int gs_usb_get_timestamp(const struct gs_can *dev, +static inline int gs_usb_get_timestamp(const struct gs_usb *parent, u32 *timestamp_p) { __le32 timestamp; int rc; - rc = usb_control_msg_recv(dev->udev, 0, GS_USB_BREQ_TIMESTAMP, + rc = usb_control_msg_recv(parent->udev, 0, GS_USB_BREQ_TIMESTAMP, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, - dev->channel, 0, + 0, 0, ×tamp, sizeof(timestamp), USB_CTRL_GET_TIMEOUT, GFP_KERNEL); @@ -410,20 +411,20 @@ static inline int gs_usb_get_timestamp(const struct gs_can *dev, static u64 gs_usb_timestamp_read(const struct cyclecounter *cc) __must_hold(&dev->tc_lock) { - struct gs_can *dev = container_of(cc, struct gs_can, cc); + struct gs_usb *parent = container_of(cc, struct gs_usb, cc); u32 timestamp = 0; int err; - lockdep_assert_held(&dev->tc_lock); + lockdep_assert_held(&parent->tc_lock); /* drop lock for synchronous USB transfer */ - spin_unlock_bh(&dev->tc_lock); - err = gs_usb_get_timestamp(dev, ×tamp); - spin_lock_bh(&dev->tc_lock); + spin_unlock_bh(&parent->tc_lock); + err = gs_usb_get_timestamp(parent, ×tamp); + spin_lock_bh(&parent->tc_lock); if (err) - netdev_err(dev->netdev, - "Error %d while reading timestamp. HW timestamps may be inaccurate.", - err); + dev_err(&parent->udev->dev, + "Error %d while reading timestamp. HW timestamps may be inaccurate.", + err); return timestamp; } @@ -431,14 +432,14 @@ static u64 gs_usb_timestamp_read(const struct cyclecounter *cc) __must_hold(&dev static void gs_usb_timestamp_work(struct work_struct *work) { struct delayed_work *delayed_work = to_delayed_work(work); - struct gs_can *dev; + struct gs_usb *parent; - dev = container_of(delayed_work, struct gs_can, timestamp); - spin_lock_bh(&dev->tc_lock); - timecounter_read(&dev->tc); - spin_unlock_bh(&dev->tc_lock); + parent = container_of(delayed_work, struct gs_usb, timestamp); + spin_lock_bh(&parent->tc_lock); + timecounter_read(&parent->tc); + spin_unlock_bh(&parent->tc_lock); - schedule_delayed_work(&dev->timestamp, + schedule_delayed_work(&parent->timestamp, GS_USB_TIMESTAMP_WORK_DELAY_SEC * HZ); } @@ -446,37 +447,38 @@ static void gs_usb_skb_set_timestamp(struct gs_can *dev, struct sk_buff *skb, u32 timestamp) { struct skb_shared_hwtstamps *hwtstamps = skb_hwtstamps(skb); + struct gs_usb *parent = dev->parent; u64 ns; - spin_lock_bh(&dev->tc_lock); - ns = timecounter_cyc2time(&dev->tc, timestamp); - spin_unlock_bh(&dev->tc_lock); + spin_lock_bh(&parent->tc_lock); + ns = timecounter_cyc2time(&parent->tc, timestamp); + spin_unlock_bh(&parent->tc_lock); hwtstamps->hwtstamp = ns_to_ktime(ns); } -static void gs_usb_timestamp_init(struct gs_can *dev) +static void gs_usb_timestamp_init(struct gs_usb *parent) { - struct cyclecounter *cc = &dev->cc; + struct cyclecounter *cc = &parent->cc; cc->read = gs_usb_timestamp_read; cc->mask = CYCLECOUNTER_MASK(32); cc->shift = 32 - bits_per(NSEC_PER_SEC / GS_USB_TIMESTAMP_TIMER_HZ); cc->mult = clocksource_hz2mult(GS_USB_TIMESTAMP_TIMER_HZ, cc->shift); - spin_lock_init(&dev->tc_lock); - spin_lock_bh(&dev->tc_lock); - timecounter_init(&dev->tc, &dev->cc, ktime_get_real_ns()); - spin_unlock_bh(&dev->tc_lock); + spin_lock_init(&parent->tc_lock); + spin_lock_bh(&parent->tc_lock); + timecounter_init(&parent->tc, &parent->cc, ktime_get_real_ns()); + spin_unlock_bh(&parent->tc_lock); - INIT_DELAYED_WORK(&dev->timestamp, gs_usb_timestamp_work); - schedule_delayed_work(&dev->timestamp, + INIT_DELAYED_WORK(&parent->timestamp, gs_usb_timestamp_work); + schedule_delayed_work(&parent->timestamp, GS_USB_TIMESTAMP_WORK_DELAY_SEC * HZ); } -static void gs_usb_timestamp_stop(struct gs_can *dev) +static void gs_usb_timestamp_stop(struct gs_usb *parent) { - cancel_delayed_work_sync(&dev->timestamp); + cancel_delayed_work_sync(&parent->timestamp); } static void gs_update_state(struct gs_can *dev, struct can_frame *cf) @@ -560,6 +562,9 @@ static void gs_usb_receive_bulk_callback(struct urb *urb) if (!netif_device_present(netdev)) return; + if (!netif_running(netdev)) + goto resubmit_urb; + if (hf->echo_id == -1) { /* normal rx */ if (hf->flags & GS_CAN_FLAG_FD) { skb = alloc_canfd_skb(dev->netdev, &cfd); @@ -856,6 +861,9 @@ static int gs_can_open(struct net_device *netdev) } if (!parent->active_channels) { + if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) + gs_usb_timestamp_init(parent); + for (i = 0; i < GS_MAX_RX_URBS; i++) { u8 *buf; @@ -926,13 +934,9 @@ static int gs_can_open(struct net_device *netdev) flags |= GS_CAN_MODE_FD; /* if hardware supports timestamps, enable it */ - if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) { + if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) flags |= GS_CAN_MODE_HW_TIMESTAMP; - /* start polling timestamp */ - gs_usb_timestamp_init(dev); - } - /* finally start device */ dev->can.state = CAN_STATE_ERROR_ACTIVE; dm.flags = cpu_to_le32(flags); @@ -942,8 +946,6 @@ static int gs_can_open(struct net_device *netdev) GFP_KERNEL); if (rc) { netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); - if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) - gs_usb_timestamp_stop(dev); dev->can.state = CAN_STATE_STOPPED; goto out_usb_kill_anchored_urbs; @@ -960,9 +962,13 @@ out_usb_unanchor_urb: out_usb_free_urb: usb_free_urb(urb); out_usb_kill_anchored_urbs: - if (!parent->active_channels) + if (!parent->active_channels) { usb_kill_anchored_urbs(&dev->tx_submitted); + if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) + gs_usb_timestamp_stop(parent); + } + close_candev(netdev); return rc; @@ -1011,14 +1017,13 @@ static int gs_can_close(struct net_device *netdev) netif_stop_queue(netdev); - /* stop polling timestamp */ - if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) - gs_usb_timestamp_stop(dev); - /* Stop polling */ parent->active_channels--; if (!parent->active_channels) { usb_kill_anchored_urbs(&parent->rx_submitted); + + if (dev->feature & GS_CAN_FEATURE_HW_TIMESTAMP) + gs_usb_timestamp_stop(parent); } /* Stop sending URBs */ -- cgit v1.2.3 From 785b3f667b4bf98804cad135005e964df0c750de Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Tue, 11 Jul 2023 17:34:10 +0200 Subject: drm/i915/perf: add sentinel to xehp_oa_b_counters Arrays passed to reg_in_range_table should end with empty record. The patch solves KASAN detected bug with signature: BUG: KASAN: global-out-of-bounds in xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Read of size 4 at addr ffffffffa1555d90 by task perf/1518 CPU: 4 PID: 1518 Comm: perf Tainted: G U 6.4.0-kasan_438-g3303d06107f3+ #1 Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P DDR5 SODIMM SBS RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 Call Trace: ... xehp_is_valid_b_counter_addr+0x2c7/0x350 [i915] Fixes: 0fa9349dda03 ("drm/i915/perf: complete programming whitelisting for XEHPSDV") Signed-off-by: Andrzej Hajda Reviewed-by: Andi Shyti Reviewed-by: Nirmoy Das Link: https://patchwork.freedesktop.org/patch/msgid/20230711153410.1224997-1-andrzej.hajda@intel.com (cherry picked from commit 2f42c5afb34b5696cf5fe79e744f99be9b218798) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/i915_perf.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 7413c11fb562..49c6f1ff1128 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -4431,6 +4431,7 @@ static const struct i915_range mtl_oam_b_counters[] = { static const struct i915_range xehp_oa_b_counters[] = { { .start = 0xdc48, .end = 0xdc48 }, /* OAA_ENABLE_REG */ { .start = 0xdd00, .end = 0xdd48 }, /* OAG_LCE0_0 - OAA_LENABLE_REG */ + {} }; static const struct i915_range gen7_oa_mux_regs[] = { -- cgit v1.2.3 From 2c27770a7bc88ef7f6614d11d96d8e62017d0b78 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 11 Jul 2023 14:02:14 +0300 Subject: Revert "drm/i915: use localized __diag_ignore_all() instead of per file" This reverts commit 88e9664434c994e97a9f6f8cdd1535495c660cea. __diag_ignore_all() only works for GCC 8 or later. -Woverride-init (from -Wextra, enabled in i915 Makefile) combined with CONFIG_WERROR=y or W=e breaks the build for older GCC. With i386_defconfig and x86_64_defconfig enabling CONFIG_WERROR=y by default, we really need to roll back the change. An alternative would be to disable -Woverride-init in the Makefile for GCC <8, but the revert seems like the safest bet now. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8768 Reported-by: John Garry References: https://lore.kernel.org/r/ad2601c0-84bb-c574-3702-a83ff8faf98c@oracle.com References: https://lore.kernel.org/r/87wmzezns4.fsf@intel.com Fixes: 88e9664434c9 ("drm/i915: use localized __diag_ignore_all() instead of per file") Cc: Gustavo Sousa Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: Tvrtko Ursulin Signed-off-by: Jani Nikula Reviewed-by: Gustavo Sousa Tested-by: John Garry Link: https://patchwork.freedesktop.org/patch/msgid/20230711110214.25093-1-jani.nikula@intel.com (cherry picked from commit 290d161045753240f2100b8f44660426ecc97be5) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/Makefile | 5 +++++ drivers/gpu/drm/i915/display/intel_display_device.c | 5 ----- drivers/gpu/drm/i915/display/intel_fbdev.c | 5 ----- drivers/gpu/drm/i915/i915_pci.c | 5 ----- 4 files changed, 5 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile index 789dce9e2608..dcbda9ba32dd 100644 --- a/drivers/gpu/drm/i915/Makefile +++ b/drivers/gpu/drm/i915/Makefile @@ -23,6 +23,11 @@ subdir-ccflags-y += $(call cc-option, -Wunused-but-set-variable) subdir-ccflags-y += $(call cc-disable-warning, frame-address) subdir-ccflags-$(CONFIG_DRM_I915_WERROR) += -Werror +# Fine grained warnings disable +CFLAGS_i915_pci.o = $(call cc-disable-warning, override-init) +CFLAGS_display/intel_display_device.o = $(call cc-disable-warning, override-init) +CFLAGS_display/intel_fbdev.o = $(call cc-disable-warning, override-init) + subdir-ccflags-y += -I$(srctree)/$(src) # Please keep these build lists sorted! diff --git a/drivers/gpu/drm/i915/display/intel_display_device.c b/drivers/gpu/drm/i915/display/intel_display_device.c index 3fd30e7f0062..f0ee9bcf661d 100644 --- a/drivers/gpu/drm/i915/display/intel_display_device.c +++ b/drivers/gpu/drm/i915/display/intel_display_device.c @@ -16,9 +16,6 @@ #include "intel_display_reg_defs.h" #include "intel_fbc.h" -__diag_push(); -__diag_ignore_all("-Woverride-init", "Allow overriding inherited members"); - static const struct intel_display_device_info no_display = {}; #define PIPE_A_OFFSET 0x70000 @@ -665,8 +662,6 @@ static const struct intel_display_device_info xe_lpdp_display = { BIT(TRANSCODER_C) | BIT(TRANSCODER_D), }; -__diag_pop(); - #undef INTEL_VGA_DEVICE #undef INTEL_QUANTA_VGA_DEVICE #define INTEL_VGA_DEVICE(id, info) { id, info } diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c index 1cc0ddc6a310..80c3f88310db 100644 --- a/drivers/gpu/drm/i915/display/intel_fbdev.c +++ b/drivers/gpu/drm/i915/display/intel_fbdev.c @@ -135,9 +135,6 @@ static int intel_fbdev_mmap(struct fb_info *info, struct vm_area_struct *vma) return i915_gem_fb_mmap(obj, vma); } -__diag_push(); -__diag_ignore_all("-Woverride-init", "Allow overriding the default ops"); - static const struct fb_ops intelfb_ops = { .owner = THIS_MODULE, __FB_DEFAULT_DEFERRED_OPS_RDWR(intel_fbdev), @@ -149,8 +146,6 @@ static const struct fb_ops intelfb_ops = { .fb_mmap = intel_fbdev_mmap, }; -__diag_pop(); - static int intelfb_alloc(struct drm_fb_helper *helper, struct drm_fb_helper_surface_size *sizes) { diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 3d7a5db9833b..928975d5fe2f 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -38,9 +38,6 @@ #include "i915_reg.h" #include "intel_pci_config.h" -__diag_push(); -__diag_ignore_all("-Woverride-init", "Allow overriding inherited members"); - #define PLATFORM(x) .platform = (x) #define GEN(x) \ .__runtime.graphics.ip.ver = (x), \ @@ -846,8 +843,6 @@ static const struct intel_device_info mtl_info = { #undef PLATFORM -__diag_pop(); - /* * Make sure any device matches here are from most specific to most * general. For example, since the Quanta match is based on the subsystem -- cgit v1.2.3 From 5f4fa1672d98fe99d2297b03add35346f1685d6b Mon Sep 17 00:00:00 2001 From: Ding Hui Date: Tue, 9 May 2023 19:11:47 +0800 Subject: iavf: Fix use-after-free in free_netdev We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui Cc: Donglin Peng Cc: Huang Cun Reviewed-by: Simon Horman Reviewed-by: Madhu Chittim Reviewed-by: Leon Romanovsky Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index a483eb185c99..89d88c3a7add 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1828,19 +1828,16 @@ static int iavf_alloc_q_vectors(struct iavf_adapter *adapter) static void iavf_free_q_vectors(struct iavf_adapter *adapter) { int q_idx, num_q_vectors; - int napi_vectors; if (!adapter->q_vectors) return; num_q_vectors = adapter->num_msix_vectors - NONQ_VECS; - napi_vectors = adapter->num_active_queues; for (q_idx = 0; q_idx < num_q_vectors; q_idx++) { struct iavf_q_vector *q_vector = &adapter->q_vectors[q_idx]; - if (q_idx < napi_vectors) - netif_napi_del(&q_vector->napi); + netif_napi_del(&q_vector->napi); } kfree(adapter->q_vectors); adapter->q_vectors = NULL; -- cgit v1.2.3 From 7c4bced3caa749ce468b0c5de711c98476b23a52 Mon Sep 17 00:00:00 2001 From: Ding Hui Date: Tue, 9 May 2023 19:11:48 +0800 Subject: iavf: Fix out-of-bounds when setting channels on remove If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0 [ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001 [ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700 [ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001 [ 3510.401090] [ 3510.401093] Allocated by task 76795: [ 3510.401098] kasan_kmalloc+0xa6/0xd0 [ 3510.401099] __kmalloc+0xfb/0x200 [ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf] [ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf] [ 3510.401114] process_one_work+0x56a/0x11f0 [ 3510.401115] worker_thread+0x8f/0xf40 [ 3510.401117] kthread+0x2a0/0x390 [ 3510.401119] ret_from_fork+0x1f/0x40 [ 3510.401122] 0xffffffffffffffff [ 3510.401123] In timeout handling, we should keep the original num_active_queues and reset num_req_queues to 0. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Ding Hui Cc: Donglin Peng Cc: Huang Cun Reviewed-by: Leon Romanovsky Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index 6f171d1d85b7..92443f8e9fbd 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -1863,7 +1863,7 @@ static int iavf_set_channels(struct net_device *netdev, } if (i == IAVF_RESET_WAIT_COMPLETE_COUNT) { adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED; - adapter->num_active_queues = num_req; + adapter->num_req_queues = 0; return -EOPNOTSUPP; } -- cgit v1.2.3 From a77ed5c5b768e9649be240a2d864e5cd9c6a2015 Mon Sep 17 00:00:00 2001 From: Ahmed Zaki Date: Fri, 19 May 2023 15:46:02 -0600 Subject: iavf: use internal state to free traffic IRQs If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation") Signed-off-by: Ahmed Zaki Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 89d88c3a7add..058e19c6f94a 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1929,15 +1929,16 @@ static void iavf_free_rss(struct iavf_adapter *adapter) /** * iavf_reinit_interrupt_scheme - Reallocate queues and vectors * @adapter: board private structure + * @running: true if adapter->state == __IAVF_RUNNING * * Returns 0 on success, negative on failure **/ -static int iavf_reinit_interrupt_scheme(struct iavf_adapter *adapter) +static int iavf_reinit_interrupt_scheme(struct iavf_adapter *adapter, bool running) { struct net_device *netdev = adapter->netdev; int err; - if (netif_running(netdev)) + if (running) iavf_free_traffic_irqs(adapter); iavf_free_misc_irq(adapter); iavf_reset_interrupt_capability(adapter); @@ -3053,7 +3054,7 @@ continue_reset: if ((adapter->flags & IAVF_FLAG_REINIT_MSIX_NEEDED) || (adapter->flags & IAVF_FLAG_REINIT_ITR_NEEDED)) { - err = iavf_reinit_interrupt_scheme(adapter); + err = iavf_reinit_interrupt_scheme(adapter, running); if (err) goto reset_err; } -- cgit v1.2.3 From c2ed2403f12c74a74a0091ed5d830e72c58406e8 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Mon, 5 Jun 2023 10:52:22 -0400 Subject: iavf: Wait for reset in callbacks which trigger it There was a fail when trying to add the interface to bonding right after changing the MTU on the interface. It was caused by bonding interface unable to open the interface due to interface being in __RESETTING state because of MTU change. Add new reset_waitqueue to indicate that reset has finished. Add waiting for reset to finish in callbacks which trigger hw reset: iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam(). We use a 5000ms timeout period because on Hyper-V based systems, this operation takes around 3000-4000ms. In normal circumstances, it doesn't take more than 500ms to complete. Add a function iavf_wait_for_reset() to reuse waiting for reset code and use it also in iavf_set_channels(), which already waits for reset. We don't use error handling in iavf_set_channels() as this could cause the device to be in incorrect state if the reset was scheduled but hit timeout or the waitng function was interrupted by a signal. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Marcin Szycik Co-developed-by: Dawid Wesierski Signed-off-by: Dawid Wesierski Signed-off-by: Sylwester Dziedziuch Signed-off-by: Kamil Maziarz Signed-off-by: Mateusz Palczewski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf.h | 2 + drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 31 ++++++++------- drivers/net/ethernet/intel/iavf/iavf_main.c | 51 ++++++++++++++++++++++++- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 1 + 4 files changed, 68 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index f80f2735e688..a5cab19eb6a8 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -257,6 +257,7 @@ struct iavf_adapter { struct work_struct adminq_task; struct delayed_work client_task; wait_queue_head_t down_waitqueue; + wait_queue_head_t reset_waitqueue; wait_queue_head_t vc_waitqueue; struct iavf_q_vector *q_vectors; struct list_head vlan_filter_list; @@ -582,4 +583,5 @@ void iavf_add_adv_rss_cfg(struct iavf_adapter *adapter); void iavf_del_adv_rss_cfg(struct iavf_adapter *adapter); struct iavf_mac_filter *iavf_add_filter(struct iavf_adapter *adapter, const u8 *macaddr); +int iavf_wait_for_reset(struct iavf_adapter *adapter); #endif /* _IAVF_H_ */ diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index 92443f8e9fbd..b7141c2a941d 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -484,6 +484,7 @@ static int iavf_set_priv_flags(struct net_device *netdev, u32 flags) { struct iavf_adapter *adapter = netdev_priv(netdev); u32 orig_flags, new_flags, changed_flags; + int ret = 0; u32 i; orig_flags = READ_ONCE(adapter->flags); @@ -533,10 +534,13 @@ static int iavf_set_priv_flags(struct net_device *netdev, u32 flags) if (netif_running(netdev)) { adapter->flags |= IAVF_FLAG_RESET_NEEDED; queue_work(adapter->wq, &adapter->reset_task); + ret = iavf_wait_for_reset(adapter); + if (ret) + netdev_warn(netdev, "Changing private flags timeout or interrupted waiting for reset"); } } - return 0; + return ret; } /** @@ -627,6 +631,7 @@ static int iavf_set_ringparam(struct net_device *netdev, { struct iavf_adapter *adapter = netdev_priv(netdev); u32 new_rx_count, new_tx_count; + int ret = 0; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; @@ -673,9 +678,12 @@ static int iavf_set_ringparam(struct net_device *netdev, if (netif_running(netdev)) { adapter->flags |= IAVF_FLAG_RESET_NEEDED; queue_work(adapter->wq, &adapter->reset_task); + ret = iavf_wait_for_reset(adapter); + if (ret) + netdev_warn(netdev, "Changing ring parameters timeout or interrupted waiting for reset"); } - return 0; + return ret; } /** @@ -1830,7 +1838,7 @@ static int iavf_set_channels(struct net_device *netdev, { struct iavf_adapter *adapter = netdev_priv(netdev); u32 num_req = ch->combined_count; - int i; + int ret = 0; if ((adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_ADQ) && adapter->num_tc) { @@ -1854,20 +1862,11 @@ static int iavf_set_channels(struct net_device *netdev, adapter->flags |= IAVF_FLAG_REINIT_ITR_NEEDED; iavf_schedule_reset(adapter); - /* wait for the reset is done */ - for (i = 0; i < IAVF_RESET_WAIT_COMPLETE_COUNT; i++) { - msleep(IAVF_RESET_WAIT_MS); - if (adapter->flags & IAVF_FLAG_RESET_PENDING) - continue; - break; - } - if (i == IAVF_RESET_WAIT_COMPLETE_COUNT) { - adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED; - adapter->num_req_queues = 0; - return -EOPNOTSUPP; - } + ret = iavf_wait_for_reset(adapter); + if (ret) + netdev_warn(netdev, "Changing channel count timeout or interrupted waiting for reset"); - return 0; + return ret; } /** diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 058e19c6f94a..b89933aa5bfe 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -166,6 +166,45 @@ static struct iavf_adapter *iavf_pdev_to_adapter(struct pci_dev *pdev) return netdev_priv(pci_get_drvdata(pdev)); } +/** + * iavf_is_reset_in_progress - Check if a reset is in progress + * @adapter: board private structure + */ +static bool iavf_is_reset_in_progress(struct iavf_adapter *adapter) +{ + if (adapter->state == __IAVF_RESETTING || + adapter->flags & (IAVF_FLAG_RESET_PENDING | + IAVF_FLAG_RESET_NEEDED)) + return true; + + return false; +} + +/** + * iavf_wait_for_reset - Wait for reset to finish. + * @adapter: board private structure + * + * Returns 0 if reset finished successfully, negative on timeout or interrupt. + */ +int iavf_wait_for_reset(struct iavf_adapter *adapter) +{ + int ret = wait_event_interruptible_timeout(adapter->reset_waitqueue, + !iavf_is_reset_in_progress(adapter), + msecs_to_jiffies(5000)); + + /* If ret < 0 then it means wait was interrupted. + * If ret == 0 then it means we got a timeout while waiting + * for reset to finish. + * If ret > 0 it means reset has finished. + */ + if (ret > 0) + return 0; + else if (ret < 0) + return -EINTR; + else + return -EBUSY; +} + /** * iavf_allocate_dma_mem_d - OS specific memory alloc for shared code * @hw: pointer to the HW structure @@ -3149,6 +3188,7 @@ continue_reset: adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED; + wake_up(&adapter->reset_waitqueue); mutex_unlock(&adapter->client_lock); mutex_unlock(&adapter->crit_lock); @@ -4313,6 +4353,7 @@ static int iavf_close(struct net_device *netdev) static int iavf_change_mtu(struct net_device *netdev, int new_mtu) { struct iavf_adapter *adapter = netdev_priv(netdev); + int ret = 0; netdev_dbg(netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -4325,9 +4366,14 @@ static int iavf_change_mtu(struct net_device *netdev, int new_mtu) if (netif_running(netdev)) { adapter->flags |= IAVF_FLAG_RESET_NEEDED; queue_work(adapter->wq, &adapter->reset_task); + ret = iavf_wait_for_reset(adapter); + if (ret < 0) + netdev_warn(netdev, "MTU change interrupted waiting for reset"); + else if (ret) + netdev_warn(netdev, "MTU change timed out waiting for reset"); } - return 0; + return ret; } #define NETIF_VLAN_OFFLOAD_FEATURES (NETIF_F_HW_VLAN_CTAG_RX | \ @@ -4928,6 +4974,9 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* Setup the wait queue for indicating transition to down status */ init_waitqueue_head(&adapter->down_waitqueue); + /* Setup the wait queue for indicating transition to running state */ + init_waitqueue_head(&adapter->reset_waitqueue); + /* Setup the wait queue for indicating virtchannel events */ init_waitqueue_head(&adapter->vc_waitqueue); diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 7c0578b5457b..1bab896aaf40 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -2285,6 +2285,7 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, case VIRTCHNL_OP_ENABLE_QUEUES: /* enable transmits */ iavf_irq_enable(adapter, true); + wake_up(&adapter->reset_waitqueue); adapter->flags &= ~IAVF_FLAG_QUEUES_DISABLED; break; case VIRTCHNL_OP_DISABLE_QUEUES: -- cgit v1.2.3 From d2806d960e8387945b53edf7ed9d71ab3ab5f073 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Mon, 5 Jun 2023 10:52:23 -0400 Subject: Revert "iavf: Detach device during reset task" This reverts commit aa626da947e9cd30c4cf727493903e1adbb2c0a0. Detaching device during reset was not fully fixing the rtnl locking issue, as there could be a situation where callback was already in progress before detaching netdev. Furthermore, detaching netdevice causes TX timeouts if traffic is running. To reproduce: ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null & while :; do for i in 200 7000 400 5000 300 3000 ; do ip netns exec ns1 ip link set $VF1 mtu $i sleep 2 done sleep 10 done Currently, callbacks such as iavf_change_mtu() wait for the reset. If the reset fails to acquire the rtnl_lock, they schedule the netdev update for later while continuing the reset flow. Operations like MTU changes are performed under the rtnl_lock. Therefore, when the operation finishes, another callback that uses rtnl_lock can start. Signed-off-by: Dawid Wesierski Signed-off-by: Marcin Szycik Signed-off-by: Mateusz Palczewski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index b89933aa5bfe..957ad6e63f6f 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -2977,11 +2977,6 @@ static void iavf_reset_task(struct work_struct *work) int i = 0, err; bool running; - /* Detach interface to avoid subsequent NDO callbacks */ - rtnl_lock(); - netif_device_detach(netdev); - rtnl_unlock(); - /* When device is being removed it doesn't make sense to run the reset * task, just return in such a case. */ @@ -2989,7 +2984,7 @@ static void iavf_reset_task(struct work_struct *work) if (adapter->state != __IAVF_REMOVE) queue_work(adapter->wq, &adapter->reset_task); - goto reset_finish; + return; } while (!mutex_trylock(&adapter->client_lock)) @@ -3192,7 +3187,7 @@ continue_reset: mutex_unlock(&adapter->client_lock); mutex_unlock(&adapter->crit_lock); - goto reset_finish; + return; reset_err: if (running) { set_bit(__IAVF_VSI_DOWN, adapter->vsi.state); @@ -3213,10 +3208,6 @@ reset_err: } dev_err(&adapter->pdev->dev, "failed to allocate resources during reinit\n"); -reset_finish: - rtnl_lock(); - netif_device_attach(netdev); - rtnl_unlock(); } /** -- cgit v1.2.3 From d916d273041b0b5652434ff27aec716ff90992ac Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Mon, 5 Jun 2023 10:52:24 -0400 Subject: Revert "iavf: Do not restart Tx queues after reset task failure" This reverts commit 08f1c147b7265245d67321585c68a27e990e0c4b. Netdev is no longer being detached during reset, so this fix can be reverted. We leave the removal of "hacky" IFF_UP flag update. Signed-off-by: Marcin Szycik Signed-off-by: Mateusz Palczewski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf_main.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 957ad6e63f6f..0c12a752429c 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -3042,11 +3042,6 @@ static void iavf_reset_task(struct work_struct *work) iavf_disable_vf(adapter); mutex_unlock(&adapter->client_lock); mutex_unlock(&adapter->crit_lock); - if (netif_running(netdev)) { - rtnl_lock(); - dev_close(netdev); - rtnl_unlock(); - } return; /* Do not attempt to reinit. It's dead, Jim. */ } @@ -3197,16 +3192,6 @@ reset_err: mutex_unlock(&adapter->client_lock); mutex_unlock(&adapter->crit_lock); - - if (netif_running(netdev)) { - /* Close device to ensure that Tx queues will not be started - * during netif_device_attach() at the end of the reset task. - */ - rtnl_lock(); - dev_close(netdev); - rtnl_unlock(); - } - dev_err(&adapter->pdev->dev, "failed to allocate resources during reinit\n"); } -- cgit v1.2.3 From d1639a17319ba78a018280cd2df6577a7e5d9fab Mon Sep 17 00:00:00 2001 From: Ahmed Zaki Date: Mon, 5 Jun 2023 10:52:25 -0400 Subject: iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies A driver's lock (crit_lock) is used to serialize all the driver's tasks. Lockdep, however, shows a circular dependency between rtnl and crit_lock. This happens when an ndo that already holds the rtnl requests the driver to reset, since the reset task (in some paths) tries to grab rtnl to either change real number of queues of update netdev features. [566.241851] ====================================================== [566.241893] WARNING: possible circular locking dependency detected [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE [566.241984] ------------------------------------------------------ [566.242025] repro.sh/2604 is trying to acquire lock: [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf] [566.242167] but task is already holding lock: [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf] [566.242300] which lock already depends on the new lock. [566.242353] the existing dependency chain (in reverse order) is: [566.242401] -> #1 (rtnl_mutex){+.+.}-{3:3}: [566.242451] __mutex_lock+0xc1/0xbb0 [566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf] [566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf] [566.242627] process_one_work+0x2b3/0x560 [566.242663] worker_thread+0x4f/0x3a0 [566.242696] kthread+0xf2/0x120 [566.242730] ret_from_fork+0x29/0x50 [566.242763] -> #0 (&adapter->crit_lock){+.+.}-{3:3}: [566.242815] __lock_acquire+0x15ff/0x22b0 [566.242869] lock_acquire+0xd2/0x2c0 [566.242901] __mutex_lock+0xc1/0xbb0 [566.242934] iavf_close+0x3c/0x240 [iavf] [566.242997] __dev_close_many+0xac/0x120 [566.243036] dev_close_many+0x8b/0x140 [566.243071] unregister_netdevice_many_notify+0x165/0x7c0 [566.243116] unregister_netdevice_queue+0xd3/0x110 [566.243157] iavf_remove+0x6c1/0x730 [iavf] [566.243217] pci_device_remove+0x33/0xa0 [566.243257] device_release_driver_internal+0x1bc/0x240 [566.243299] pci_stop_bus_device+0x6c/0x90 [566.243338] pci_stop_and_remove_bus_device+0xe/0x20 [566.243380] pci_iov_remove_virtfn+0xd1/0x130 [566.243417] sriov_disable+0x34/0xe0 [566.243448] ice_free_vfs+0x2da/0x330 [ice] [566.244383] ice_sriov_configure+0x88/0xad0 [ice] [566.245353] sriov_numvfs_store+0xde/0x1d0 [566.246156] kernfs_fop_write_iter+0x15e/0x210 [566.246921] vfs_write+0x288/0x530 [566.247671] ksys_write+0x74/0xf0 [566.248408] do_syscall_64+0x58/0x80 [566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc [566.249886] other info that might help us debug this: [566.252014] Possible unsafe locking scenario: [566.253432] CPU0 CPU1 [566.254118] ---- ---- [566.254800] lock(rtnl_mutex); [566.255514] lock(&adapter->crit_lock); [566.256233] lock(rtnl_mutex); [566.256897] lock(&adapter->crit_lock); [566.257388] *** DEADLOCK *** The deadlock can be triggered by a script that is continuously resetting the VF adapter while doing other operations requiring RTNL, e.g: while :; do ip link set $VF up ethtool --set-channels $VF combined 2 ip link set $VF down ip link set $VF up ethtool --set-channels $VF combined 4 ip link set $VF down done Any operation that triggers a reset can substitute "ethtool --set-channles" As a fix, add a new task "finish_config" that do all the work which needs rtnl lock. With the exception of iavf_remove(), all work that require rtnl should be called from this task. As for iavf_remove(), at the point where we need to call unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent finish_config work cannot restart after that since the task is guarded by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config(). Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Ahmed Zaki Signed-off-by: Mateusz Palczewski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf.h | 2 + drivers/net/ethernet/intel/iavf/iavf_main.c | 114 +++++++++++++++++------- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 1 + 3 files changed, 85 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index a5cab19eb6a8..bf5e3c8e97e0 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -255,6 +255,7 @@ struct iavf_adapter { struct workqueue_struct *wq; struct work_struct reset_task; struct work_struct adminq_task; + struct work_struct finish_config; struct delayed_work client_task; wait_queue_head_t down_waitqueue; wait_queue_head_t reset_waitqueue; @@ -521,6 +522,7 @@ int iavf_process_config(struct iavf_adapter *adapter); int iavf_parse_vf_resource_msg(struct iavf_adapter *adapter); void iavf_schedule_reset(struct iavf_adapter *adapter); void iavf_schedule_request_stats(struct iavf_adapter *adapter); +void iavf_schedule_finish_config(struct iavf_adapter *adapter); void iavf_reset(struct iavf_adapter *adapter); void iavf_set_ethtool_ops(struct net_device *netdev); void iavf_update_stats(struct iavf_adapter *adapter); diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 0c12a752429c..2a2ae3c4337b 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -1690,10 +1690,10 @@ static int iavf_set_interrupt_capability(struct iavf_adapter *adapter) adapter->msix_entries[vector].entry = vector; err = iavf_acquire_msix_vectors(adapter, v_budget); + if (!err) + iavf_schedule_finish_config(adapter); out: - netif_set_real_num_rx_queues(adapter->netdev, pairs); - netif_set_real_num_tx_queues(adapter->netdev, pairs); return err; } @@ -1913,9 +1913,7 @@ static int iavf_init_interrupt_scheme(struct iavf_adapter *adapter) goto err_alloc_queues; } - rtnl_lock(); err = iavf_set_interrupt_capability(adapter); - rtnl_unlock(); if (err) { dev_err(&adapter->pdev->dev, "Unable to setup interrupt capabilities\n"); @@ -2001,6 +1999,78 @@ err: return err; } +/** + * iavf_finish_config - do all netdev work that needs RTNL + * @work: our work_struct + * + * Do work that needs both RTNL and crit_lock. + **/ +static void iavf_finish_config(struct work_struct *work) +{ + struct iavf_adapter *adapter; + int pairs, err; + + adapter = container_of(work, struct iavf_adapter, finish_config); + + /* Always take RTNL first to prevent circular lock dependency */ + rtnl_lock(); + mutex_lock(&adapter->crit_lock); + + if ((adapter->flags & IAVF_FLAG_SETUP_NETDEV_FEATURES) && + adapter->netdev_registered && + !test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)) { + netdev_update_features(adapter->netdev); + adapter->flags &= ~IAVF_FLAG_SETUP_NETDEV_FEATURES; + } + + switch (adapter->state) { + case __IAVF_DOWN: + if (!adapter->netdev_registered) { + err = register_netdevice(adapter->netdev); + if (err) { + dev_err(&adapter->pdev->dev, "Unable to register netdev (%d)\n", + err); + + /* go back and try again.*/ + iavf_free_rss(adapter); + iavf_free_misc_irq(adapter); + iavf_reset_interrupt_capability(adapter); + iavf_change_state(adapter, + __IAVF_INIT_CONFIG_ADAPTER); + goto out; + } + adapter->netdev_registered = true; + } + + /* Set the real number of queues when reset occurs while + * state == __IAVF_DOWN + */ + fallthrough; + case __IAVF_RUNNING: + pairs = adapter->num_active_queues; + netif_set_real_num_rx_queues(adapter->netdev, pairs); + netif_set_real_num_tx_queues(adapter->netdev, pairs); + break; + + default: + break; + } + +out: + mutex_unlock(&adapter->crit_lock); + rtnl_unlock(); +} + +/** + * iavf_schedule_finish_config - Set the flags and schedule a reset event + * @adapter: board private structure + **/ +void iavf_schedule_finish_config(struct iavf_adapter *adapter) +{ + if (!test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section)) + queue_work(adapter->wq, &adapter->finish_config); +} + /** * iavf_process_aq_command - process aq_required flags * and sends aq command @@ -2638,22 +2708,8 @@ static void iavf_init_config_adapter(struct iavf_adapter *adapter) netif_carrier_off(netdev); adapter->link_up = false; - - /* set the semaphore to prevent any callbacks after device registration - * up to time when state of driver will be set to __IAVF_DOWN - */ - rtnl_lock(); - if (!adapter->netdev_registered) { - err = register_netdevice(netdev); - if (err) { - rtnl_unlock(); - goto err_register; - } - } - - adapter->netdev_registered = true; - netif_tx_stop_all_queues(netdev); + if (CLIENT_ALLOWED(adapter)) { err = iavf_lan_add_device(adapter); if (err) @@ -2666,7 +2722,6 @@ static void iavf_init_config_adapter(struct iavf_adapter *adapter) iavf_change_state(adapter, __IAVF_DOWN); set_bit(__IAVF_VSI_DOWN, adapter->vsi.state); - rtnl_unlock(); iavf_misc_irq_enable(adapter); wake_up(&adapter->down_waitqueue); @@ -2686,10 +2741,11 @@ static void iavf_init_config_adapter(struct iavf_adapter *adapter) /* request initial VLAN offload settings */ iavf_set_vlan_offload_features(adapter, 0, netdev->features); + iavf_schedule_finish_config(adapter); return; + err_mem: iavf_free_rss(adapter); -err_register: iavf_free_misc_irq(adapter); err_sw_init: iavf_reset_interrupt_capability(adapter); @@ -2716,15 +2772,6 @@ static void iavf_watchdog_task(struct work_struct *work) goto restart_watchdog; } - if ((adapter->flags & IAVF_FLAG_SETUP_NETDEV_FEATURES) && - adapter->netdev_registered && - !test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section) && - rtnl_trylock()) { - netdev_update_features(adapter->netdev); - rtnl_unlock(); - adapter->flags &= ~IAVF_FLAG_SETUP_NETDEV_FEATURES; - } - if (adapter->flags & IAVF_FLAG_PF_COMMS_FAILED) iavf_change_state(adapter, __IAVF_COMM_FAILED); @@ -4942,6 +4989,7 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&adapter->reset_task, iavf_reset_task); INIT_WORK(&adapter->adminq_task, iavf_adminq_task); + INIT_WORK(&adapter->finish_config, iavf_finish_config); INIT_DELAYED_WORK(&adapter->watchdog_task, iavf_watchdog_task); INIT_DELAYED_WORK(&adapter->client_task, iavf_client_task); queue_delayed_work(adapter->wq, &adapter->watchdog_task, @@ -5084,13 +5132,15 @@ static void iavf_remove(struct pci_dev *pdev) usleep_range(500, 1000); } cancel_delayed_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->finish_config); + rtnl_lock(); if (adapter->netdev_registered) { - rtnl_lock(); unregister_netdevice(netdev); adapter->netdev_registered = false; - rtnl_unlock(); } + rtnl_unlock(); + if (CLIENT_ALLOWED(adapter)) { err = iavf_lan_del_device(adapter); if (err) diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 1bab896aaf40..073ac29ed84c 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -2237,6 +2237,7 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, iavf_process_config(adapter); adapter->flags |= IAVF_FLAG_SETUP_NETDEV_FEATURES; + iavf_schedule_finish_config(adapter); iavf_set_queue_vlan_tag_loc(adapter); -- cgit v1.2.3 From c34743daca0eb1dc855831a5210f0800a850088e Mon Sep 17 00:00:00 2001 From: Ahmed Zaki Date: Mon, 5 Jun 2023 10:52:26 -0400 Subject: iavf: fix reset task race with iavf_remove() The reset task is currently scheduled from the watchdog or adminq tasks. First, all direct calls to schedule the reset task are replaced with the iavf_schedule_reset(), which is modified to accept the flag showing the type of reset. To prevent the reset task from starting once iavf_remove() starts, we need to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now easily added to iavf_schedule_reset(). Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task. It is redundant since all callers who set the flag immediately schedules the reset task. Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove") Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by: Ahmed Zaki Signed-off-by: Mateusz Palczewski Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/iavf/iavf.h | 2 +- drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 8 +++---- drivers/net/ethernet/intel/iavf/iavf_main.c | 32 +++++++++---------------- drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 3 +-- 4 files changed, 16 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h index bf5e3c8e97e0..8cbdebc5b698 100644 --- a/drivers/net/ethernet/intel/iavf/iavf.h +++ b/drivers/net/ethernet/intel/iavf/iavf.h @@ -520,7 +520,7 @@ int iavf_up(struct iavf_adapter *adapter); void iavf_down(struct iavf_adapter *adapter); int iavf_process_config(struct iavf_adapter *adapter); int iavf_parse_vf_resource_msg(struct iavf_adapter *adapter); -void iavf_schedule_reset(struct iavf_adapter *adapter); +void iavf_schedule_reset(struct iavf_adapter *adapter, u64 flags); void iavf_schedule_request_stats(struct iavf_adapter *adapter); void iavf_schedule_finish_config(struct iavf_adapter *adapter); void iavf_reset(struct iavf_adapter *adapter); diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c index b7141c2a941d..2f47cfa7f06e 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c +++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c @@ -532,8 +532,7 @@ static int iavf_set_priv_flags(struct net_device *netdev, u32 flags) /* issue a reset to force legacy-rx change to take effect */ if (changed_flags & IAVF_FLAG_LEGACY_RX) { if (netif_running(netdev)) { - adapter->flags |= IAVF_FLAG_RESET_NEEDED; - queue_work(adapter->wq, &adapter->reset_task); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); ret = iavf_wait_for_reset(adapter); if (ret) netdev_warn(netdev, "Changing private flags timeout or interrupted waiting for reset"); @@ -676,8 +675,7 @@ static int iavf_set_ringparam(struct net_device *netdev, } if (netif_running(netdev)) { - adapter->flags |= IAVF_FLAG_RESET_NEEDED; - queue_work(adapter->wq, &adapter->reset_task); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); ret = iavf_wait_for_reset(adapter); if (ret) netdev_warn(netdev, "Changing ring parameters timeout or interrupted waiting for reset"); @@ -1860,7 +1858,7 @@ static int iavf_set_channels(struct net_device *netdev, adapter->num_req_queues = num_req; adapter->flags |= IAVF_FLAG_REINIT_ITR_NEEDED; - iavf_schedule_reset(adapter); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); ret = iavf_wait_for_reset(adapter); if (ret) diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c index 2a2ae3c4337b..3a88d413ddee 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_main.c +++ b/drivers/net/ethernet/intel/iavf/iavf_main.c @@ -301,12 +301,14 @@ static int iavf_lock_timeout(struct mutex *lock, unsigned int msecs) /** * iavf_schedule_reset - Set the flags and schedule a reset event * @adapter: board private structure + * @flags: IAVF_FLAG_RESET_PENDING or IAVF_FLAG_RESET_NEEDED **/ -void iavf_schedule_reset(struct iavf_adapter *adapter) +void iavf_schedule_reset(struct iavf_adapter *adapter, u64 flags) { - if (!(adapter->flags & - (IAVF_FLAG_RESET_PENDING | IAVF_FLAG_RESET_NEEDED))) { - adapter->flags |= IAVF_FLAG_RESET_NEEDED; + if (!test_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section) && + !(adapter->flags & + (IAVF_FLAG_RESET_PENDING | IAVF_FLAG_RESET_NEEDED))) { + adapter->flags |= flags; queue_work(adapter->wq, &adapter->reset_task); } } @@ -334,7 +336,7 @@ static void iavf_tx_timeout(struct net_device *netdev, unsigned int txqueue) struct iavf_adapter *adapter = netdev_priv(netdev); adapter->tx_timeout_count++; - iavf_schedule_reset(adapter); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); } /** @@ -2478,7 +2480,7 @@ int iavf_parse_vf_resource_msg(struct iavf_adapter *adapter) adapter->vsi_res->num_queue_pairs); adapter->flags |= IAVF_FLAG_REINIT_MSIX_NEEDED; adapter->num_req_queues = adapter->vsi_res->num_queue_pairs; - iavf_schedule_reset(adapter); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); return -EAGAIN; } @@ -2775,14 +2777,6 @@ static void iavf_watchdog_task(struct work_struct *work) if (adapter->flags & IAVF_FLAG_PF_COMMS_FAILED) iavf_change_state(adapter, __IAVF_COMM_FAILED); - if (adapter->flags & IAVF_FLAG_RESET_NEEDED) { - adapter->aq_required = 0; - adapter->current_op = VIRTCHNL_OP_UNKNOWN; - mutex_unlock(&adapter->crit_lock); - queue_work(adapter->wq, &adapter->reset_task); - return; - } - switch (adapter->state) { case __IAVF_STARTUP: iavf_startup(adapter); @@ -2910,11 +2904,10 @@ static void iavf_watchdog_task(struct work_struct *work) /* check for hw reset */ reg_val = rd32(hw, IAVF_VF_ARQLEN1) & IAVF_VF_ARQLEN1_ARQENABLE_MASK; if (!reg_val) { - adapter->flags |= IAVF_FLAG_RESET_PENDING; adapter->aq_required = 0; adapter->current_op = VIRTCHNL_OP_UNKNOWN; dev_err(&adapter->pdev->dev, "Hardware reset detected\n"); - queue_work(adapter->wq, &adapter->reset_task); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_PENDING); mutex_unlock(&adapter->crit_lock); queue_delayed_work(adapter->wq, &adapter->watchdog_task, HZ * 2); @@ -3288,9 +3281,7 @@ static void iavf_adminq_task(struct work_struct *work) } while (pending); mutex_unlock(&adapter->crit_lock); - if ((adapter->flags & - (IAVF_FLAG_RESET_PENDING | IAVF_FLAG_RESET_NEEDED)) || - adapter->state == __IAVF_RESETTING) + if (iavf_is_reset_in_progress(adapter)) goto freedom; /* check for error indications */ @@ -4387,8 +4378,7 @@ static int iavf_change_mtu(struct net_device *netdev, int new_mtu) } if (netif_running(netdev)) { - adapter->flags |= IAVF_FLAG_RESET_NEEDED; - queue_work(adapter->wq, &adapter->reset_task); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_NEEDED); ret = iavf_wait_for_reset(adapter); if (ret < 0) netdev_warn(netdev, "MTU change interrupted waiting for reset"); diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c index 073ac29ed84c..be3c007ce90a 100644 --- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c +++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c @@ -1961,9 +1961,8 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter, case VIRTCHNL_EVENT_RESET_IMPENDING: dev_info(&adapter->pdev->dev, "Reset indication received from the PF\n"); if (!(adapter->flags & IAVF_FLAG_RESET_PENDING)) { - adapter->flags |= IAVF_FLAG_RESET_PENDING; dev_info(&adapter->pdev->dev, "Scheduling reset task\n"); - queue_work(adapter->wq, &adapter->reset_task); + iavf_schedule_reset(adapter, IAVF_FLAG_RESET_PENDING); } break; default: -- cgit v1.2.3 From 9efa1a5407e81265ea502cab83be4de503decc49 Mon Sep 17 00:00:00 2001 From: Fedor Ross Date: Thu, 4 May 2023 21:50:59 +0200 Subject: can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0 mode' or . The maximum length of a CAN frame is 736 bits (64 data bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe spacing). For low bit rates like 10 kbit/s the arbitrarily chosen MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small. Otherwise during polling for the CAN controller to enter 'Normal CAN 2.0 mode' the timeout limit is exceeded and the configuration fails with: | $ ip link set dev can1 up type can bitrate 10000 | [ 731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468). | [ 731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying. | [ 731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in EFF mode, worst case bit stuffing and interframe spacing at the current bit rate. For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS that holds the max frame length in bits, which is 736. This can be replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in a cleanup patch later. Fixes: 55e5b97f003e8 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Fedor Ross Signed-off-by: Marek Vasut Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.de Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 10 ++++++++-- drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index 68df6d4641b5..eebf967f4711 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -227,6 +227,8 @@ static int __mcp251xfd_chip_set_mode(const struct mcp251xfd_priv *priv, const u8 mode_req, bool nowait) { + const struct can_bittiming *bt = &priv->can.bittiming; + unsigned long timeout_us = MCP251XFD_POLL_TIMEOUT_US; u32 con = 0, con_reqop, osc = 0; u8 mode; int err; @@ -246,12 +248,16 @@ __mcp251xfd_chip_set_mode(const struct mcp251xfd_priv *priv, if (mode_req == MCP251XFD_REG_CON_MODE_SLEEP || nowait) return 0; + if (bt->bitrate) + timeout_us = max_t(unsigned long, timeout_us, + MCP251XFD_FRAME_LEN_MAX_BITS * USEC_PER_SEC / + bt->bitrate); + err = regmap_read_poll_timeout(priv->map_reg, MCP251XFD_REG_CON, con, !mcp251xfd_reg_invalid(con) && FIELD_GET(MCP251XFD_REG_CON_OPMOD_MASK, con) == mode_req, - MCP251XFD_POLL_SLEEP_US, - MCP251XFD_POLL_TIMEOUT_US); + MCP251XFD_POLL_SLEEP_US, timeout_us); if (err != -ETIMEDOUT && err != -EBADMSG) return err; diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h index 7024ff0cc2c0..24510b3b8020 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h @@ -387,6 +387,7 @@ static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC < #define MCP251XFD_OSC_STAB_TIMEOUT_US (10 * MCP251XFD_OSC_STAB_SLEEP_US) #define MCP251XFD_POLL_SLEEP_US (10) #define MCP251XFD_POLL_TIMEOUT_US (USEC_PER_MSEC) +#define MCP251XFD_FRAME_LEN_MAX_BITS (736) /* Misc */ #define MCP251XFD_NAPI_WEIGHT 32 -- cgit v1.2.3 From 6e8a996563ecbe68e49c49abd4aaeef69f11f2dc Mon Sep 17 00:00:00 2001 From: Gaosheng Cui Date: Mon, 17 Jul 2023 09:47:38 +0800 Subject: drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb() The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null is catastrophic here, so we should use IS_ERR_OR_NULL() to check the return value. Fixes: 6a8bd08d0465 ("drm/msm: add sudo flag to submit ioctl") Signed-off-by: Gaosheng Cui Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Reviewed-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/547712/ Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c index a99310b68793..bbb1bf33f98e 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c @@ -89,7 +89,7 @@ static void a5xx_submit_in_rb(struct msm_gpu *gpu, struct msm_gem_submit *submit * since we've already mapped it once in * submit_reloc() */ - if (WARN_ON(!ptr)) + if (WARN_ON(IS_ERR_OR_NULL(ptr))) return; for (i = 0; i < dwords; i++) { -- cgit v1.2.3 From f4032d615f90970d6c3ac1d9c0bce3351eb4445c Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 16 May 2023 01:25:54 +0300 Subject: tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation /dev/vtpmx is made visible before 'workqueue' is initialized, which can lead to a memory corruption in the worst case scenario. Address this by initializing 'workqueue' as the very first step of the driver initialization. Cc: stable@vger.kernel.org Fixes: 6f99612e2500 ("tpm: Proxy driver for supporting multiple emulated TPMs") Reviewed-by: Stefan Berger Signed-off-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_vtpm_proxy.c | 30 +++++++----------------------- 1 file changed, 7 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_vtpm_proxy.c b/drivers/char/tpm/tpm_vtpm_proxy.c index 5c865987ba5c..30e953988cab 100644 --- a/drivers/char/tpm/tpm_vtpm_proxy.c +++ b/drivers/char/tpm/tpm_vtpm_proxy.c @@ -683,37 +683,21 @@ static struct miscdevice vtpmx_miscdev = { .fops = &vtpmx_fops, }; -static int vtpmx_init(void) -{ - return misc_register(&vtpmx_miscdev); -} - -static void vtpmx_cleanup(void) -{ - misc_deregister(&vtpmx_miscdev); -} - static int __init vtpm_module_init(void) { int rc; - rc = vtpmx_init(); - if (rc) { - pr_err("couldn't create vtpmx device\n"); - return rc; - } - workqueue = create_workqueue("tpm-vtpm"); if (!workqueue) { pr_err("couldn't create workqueue\n"); - rc = -ENOMEM; - goto err_vtpmx_cleanup; + return -ENOMEM; } - return 0; - -err_vtpmx_cleanup: - vtpmx_cleanup(); + rc = misc_register(&vtpmx_miscdev); + if (rc) { + pr_err("couldn't create vtpmx device\n"); + destroy_workqueue(workqueue); + } return rc; } @@ -721,7 +705,7 @@ err_vtpmx_cleanup: static void __exit vtpm_module_exit(void) { destroy_workqueue(workqueue); - vtpmx_cleanup(); + misc_deregister(&vtpmx_miscdev); } module_init(vtpm_module_init); -- cgit v1.2.3 From edb13d7bb034c4d5523f15e9aeea31c504af6f91 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 17 May 2023 15:29:31 +0300 Subject: tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11 Further restrict with DMI_PRODUCT_VERSION. Cc: stable@vger.kernel.org # v6.4+ Link: https://lore.kernel.org/linux-integrity/20230517122931.22385-1-peter.ujfalusi@linux.intel.com/ Fixes: 95a9359ee22f ("tpm: tpm_tis: Disable interrupts for AEON UPX-i11") Signed-off-by: Peter Ujfalusi Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 7db3593941ea..9cb4e81fc548 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -143,6 +143,7 @@ static const struct dmi_system_id tpm_tis_dmi_table[] = { .ident = "UPX-TGL", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_MATCH(DMI_PRODUCT_VERSION, "UPX-TGL"), }, }, {} -- cgit v1.2.3 From f0afba4042bd902d290405c0638bc1295872d8a7 Mon Sep 17 00:00:00 2001 From: Peijie Shao Date: Tue, 23 May 2023 10:45:36 +0800 Subject: tpm_tis_spi: Release chip select when flow control fails The failure paths in tpm_tis_spi_transfer() do not deactivate chip select. Send an empty message (cs_select == 0) to overcome this. The patch is tested by two ways. One way needs to touch hardware: 1. force pull MISO pin down to GND, it emulates a forever 'WAIT' timing. 2. probe cs pin by an oscilloscope. 3. load tpm_tis_spi.ko. After loading, dmesg prints: "probe of spi0.0 failed with error -110" and oscilloscope shows cs pin goes high(deactivated) after the failure. Before the patch, cs pin keeps low. Second way is by writing a fake spi controller. 1. implement .transfer_one method, fill all rx buf with 0. 2. implement .set_cs method, print the state of cs pin. we can see cs goes high after the failure. Signed-off-by: Peijie Shao Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_spi_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis_spi_main.c b/drivers/char/tpm/tpm_tis_spi_main.c index 1f5207974a17..9bfaba092a06 100644 --- a/drivers/char/tpm/tpm_tis_spi_main.c +++ b/drivers/char/tpm/tpm_tis_spi_main.c @@ -136,6 +136,14 @@ int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len, } exit: + if (ret < 0) { + /* Deactivate chip select */ + memset(&spi_xfer, 0, sizeof(spi_xfer)); + spi_message_init(&m); + spi_message_add_tail(&spi_xfer, &m); + spi_sync_locked(phy->spi_device, &m); + } + spi_bus_unlock(phy->spi_device->master); return ret; } -- cgit v1.2.3 From f3b70b6e3390bfdf18fdd7d278a72a12784fdcce Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Wed, 24 May 2023 17:40:39 +0200 Subject: tpm: tis_i2c: Limit read bursts to I2C_SMBUS_BLOCK_MAX (32) bytes Underlying I2C bus drivers not always support longer transfers and imx-lpi2c for instance doesn't. SLB 9673 offers 427-bytes packets. Visible symptoms are: tpm tpm0: Error left over data tpm tpm0: tpm_transmit: tpm_recv: error -5 tpm_tis_i2c: probe of 1-002e failed with error -5 Cc: stable@vger.kernel.org # v5.20+ Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Tested-by: Michael Haener Signed-off-by: Alexander Sverdlin Reviewed-by: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_i2c.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis_i2c.c b/drivers/char/tpm/tpm_tis_i2c.c index c8c34adc14c0..106fd20d94e4 100644 --- a/drivers/char/tpm/tpm_tis_i2c.c +++ b/drivers/char/tpm/tpm_tis_i2c.c @@ -189,21 +189,28 @@ static int tpm_tis_i2c_read_bytes(struct tpm_tis_data *data, u32 addr, u16 len, int ret; for (i = 0; i < TPM_RETRY; i++) { - /* write register */ - msg.len = sizeof(reg); - msg.buf = ® - msg.flags = 0; - ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); - if (ret < 0) - return ret; - - /* read data */ - msg.buf = result; - msg.len = len; - msg.flags = I2C_M_RD; - ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); - if (ret < 0) - return ret; + u16 read = 0; + + while (read < len) { + /* write register */ + msg.len = sizeof(reg); + msg.buf = ® + msg.flags = 0; + ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); + if (ret < 0) + return ret; + + /* read data */ + msg.buf = result + read; + msg.len = len - read; + msg.flags = I2C_M_RD; + if (msg.len > I2C_SMBUS_BLOCK_MAX) + msg.len = I2C_SMBUS_BLOCK_MAX; + ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); + if (ret < 0) + return ret; + read += msg.len; + } ret = tpm_tis_i2c_sanity_check_read(reg, len, result); if (ret == 0) -- cgit v1.2.3 From 83e7e5d89f04d1c417492940f7922bc8416a8cc4 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Wed, 24 May 2023 17:40:40 +0200 Subject: tpm: tis_i2c: Limit write bursts to I2C_SMBUS_BLOCK_MAX (32) bytes Underlying I2C bus drivers not always support longer transfers and imx-lpi2c for instance doesn't. The fix is symmetric to previous patch which fixed the read direction. Cc: stable@vger.kernel.org # v5.20+ Fixes: bbc23a07b072 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core") Tested-by: Michael Haener Signed-off-by: Alexander Sverdlin Reviewed-by: Jarkko Sakkinen Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_i2c.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis_i2c.c b/drivers/char/tpm/tpm_tis_i2c.c index 106fd20d94e4..82fda488e98b 100644 --- a/drivers/char/tpm/tpm_tis_i2c.c +++ b/drivers/char/tpm/tpm_tis_i2c.c @@ -230,19 +230,27 @@ static int tpm_tis_i2c_write_bytes(struct tpm_tis_data *data, u32 addr, u16 len, struct i2c_msg msg = { .addr = phy->i2c_client->addr }; u8 reg = tpm_tis_i2c_address_to_register(addr); int ret; + u16 wrote = 0; if (len > TPM_BUFSIZE - 1) return -EIO; - /* write register and data in one go */ phy->io_buf[0] = reg; - memcpy(phy->io_buf + sizeof(reg), value, len); - - msg.len = sizeof(reg) + len; msg.buf = phy->io_buf; - ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); - if (ret < 0) - return ret; + while (wrote < len) { + /* write register and data in one go */ + msg.len = sizeof(reg) + len - wrote; + if (msg.len > I2C_SMBUS_BLOCK_MAX) + msg.len = I2C_SMBUS_BLOCK_MAX; + + memcpy(phy->io_buf + sizeof(reg), value + wrote, + msg.len - sizeof(reg)); + + ret = tpm_tis_i2c_retry_transfer_until_ack(data, &msg); + if (ret < 0) + return ret; + wrote += msg.len - sizeof(reg); + } return 0; } -- cgit v1.2.3 From ecff6813d2bcf0c670881a9ba3f51cb032dd405a Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Thu, 29 Jun 2023 13:41:47 -0700 Subject: tpm: return false from tpm_amd_is_rng_defective on non-x86 platforms tpm_amd_is_rng_defective is for dealing with an issue related to the AMD firmware TPM, so on non-x86 architectures just have it inline and return false. Cc: stable@vger.kernel.org # v6.3+ Reported-by: Sachin Sant Reported-by: Aneesh Kumar K. V Closes: https://lore.kernel.org/lkml/99B81401-DB46-49B9-B321-CF832B50CAC3@linux.ibm.com/ Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Signed-off-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-chip.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c index cd48033b804a..cf5499e51999 100644 --- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -518,6 +518,7 @@ static int tpm_add_legacy_sysfs(struct tpm_chip *chip) * 6.x.y.z series: 6.0.18.6 + * 3.x.y.z series: 3.57.y.5 + */ +#ifdef CONFIG_X86 static bool tpm_amd_is_rng_defective(struct tpm_chip *chip) { u32 val1, val2; @@ -566,6 +567,12 @@ release: return true; } +#else +static inline bool tpm_amd_is_rng_defective(struct tpm_chip *chip) +{ + return false; +} +#endif /* CONFIG_X86 */ static int tpm_hwrng_read(struct hwrng *rng, void *data, size_t max, bool wait) { -- cgit v1.2.3 From 08b0af4478bacb8bb701c172c99a34ea32da89f5 Mon Sep 17 00:00:00 2001 From: Christian Hesse Date: Mon, 10 Jul 2023 23:16:09 +0200 Subject: tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 12th gen This device suffer an irq storm, so add it in tpm_tis_dmi_table to force polling. Cc: stable@vger.kernel.org # v6.4+ Link: https://community.frame.work/t/boot-and-shutdown-hangs-with-arch-linux-kernel-6-4-1-mainline-and-arch/33118 Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Reported-by: Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217631 Signed-off-by: Christian Hesse Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 9cb4e81fc548..5dd391ed3320 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -114,6 +114,14 @@ static int tpm_tis_disable_irq(const struct dmi_system_id *d) } static const struct dmi_system_id tpm_tis_dmi_table[] = { + { + .callback = tpm_tis_disable_irq, + .ident = "Framework Laptop (12th Gen Intel Core)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Framework"), + DMI_MATCH(DMI_PRODUCT_NAME, "Laptop (12th Gen Intel Core)"), + }, + }, { .callback = tpm_tis_disable_irq, .ident = "ThinkPad T490s", -- cgit v1.2.3 From bc825e851c2fe89c127cac1e0e5cf344c4940619 Mon Sep 17 00:00:00 2001 From: Christian Hesse Date: Mon, 10 Jul 2023 23:16:10 +0200 Subject: tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 13th gen This device suffer an irq storm, so add it in tpm_tis_dmi_table to force polling. Cc: stable@vger.kernel.org # v6.4+ Link: https://community.frame.work/t/boot-and-shutdown-hangs-with-arch-linux-kernel-6-4-1-mainline-and-arch/33118 Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Reported-by: Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217631 Signed-off-by: Christian Hesse Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 5dd391ed3320..4e4426965cd0 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -122,6 +122,14 @@ static const struct dmi_system_id tpm_tis_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Laptop (12th Gen Intel Core)"), }, }, + { + .callback = tpm_tis_disable_irq, + .ident = "Framework Laptop (13th Gen Intel Core)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Framework"), + DMI_MATCH(DMI_PRODUCT_NAME, "Laptop (13th Gen Intel Core)"), + }, + }, { .callback = tpm_tis_disable_irq, .ident = "ThinkPad T490s", -- cgit v1.2.3 From b1c1b98962d17a922989aa3b2822946bbb5c091f Mon Sep 17 00:00:00 2001 From: Valentin David Date: Mon, 10 Jul 2023 22:27:49 +0200 Subject: tpm: Do not remap from ACPI resources again for Pluton TPM For Pluton TPM devices, it was assumed that there was no ACPI memory regions. This is not true for ASUS ROG Ally. ACPI advertises 0xfd500000-0xfd5fffff. Since remapping is already done in `crb_map_pluton`, remapping again in `crb_map_io` causes EBUSY error: [ 3.510453] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfd500000-0xfd5fffff] [ 3.510463] tpm_crb: probe of MSFT0101:00 failed with error -16 Cc: stable@vger.kernel.org # v6.3+ Fixes: 4d2732882703 ("tpm_crb: Add support for CRB devices based on Pluton") Signed-off-by: Valentin David Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_crb.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c index d43a0d7b97a8..1a5d09b18513 100644 --- a/drivers/char/tpm/tpm_crb.c +++ b/drivers/char/tpm/tpm_crb.c @@ -563,15 +563,18 @@ static int crb_map_io(struct acpi_device *device, struct crb_priv *priv, u32 rsp_size; int ret; - INIT_LIST_HEAD(&acpi_resource_list); - ret = acpi_dev_get_resources(device, &acpi_resource_list, - crb_check_resource, iores_array); - if (ret < 0) - return ret; - acpi_dev_free_resource_list(&acpi_resource_list); - - /* Pluton doesn't appear to define ACPI memory regions */ + /* + * Pluton sometimes does not define ACPI memory regions. + * Mapping is then done in crb_map_pluton + */ if (priv->sm != ACPI_TPM2_COMMAND_BUFFER_WITH_PLUTON) { + INIT_LIST_HEAD(&acpi_resource_list); + ret = acpi_dev_get_resources(device, &acpi_resource_list, + crb_check_resource, iores_array); + if (ret < 0) + return ret; + acpi_dev_free_resource_list(&acpi_resource_list); + if (resource_type(iores_array) != IORESOURCE_MEM) { dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n"); return -EINVAL; -- cgit v1.2.3 From 393f362389cecc2e4f2e3520a6c8ee9dbb1e3d15 Mon Sep 17 00:00:00 2001 From: Florian Bezdeka Date: Tue, 20 Jun 2023 13:11:01 +0200 Subject: tpm/tpm_tis: Disable interrupts for Lenovo L590 devices The Lenovo L590 suffers from an irq storm issue like the T490, T490s and P360 Tiny, so add an entry for it to tpm_tis_dmi_table and force polling. Cc: stable@vger.kernel.org # v6.4+ Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214069#c0 Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Signed-off-by: Florian Bezdeka Reviewed-by: Jerry Snitselaar Reviewed-by: Hans de Goede Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 4e4426965cd0..cc42cf3de960 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -154,6 +154,14 @@ static const struct dmi_system_id tpm_tis_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L490"), }, }, + { + .callback = tpm_tis_disable_irq, + .ident = "ThinkPad L590", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L590"), + }, + }, { .callback = tpm_tis_disable_irq, .ident = "UPX-TGL", -- cgit v1.2.3 From 481c2d14627de8ecbb54dd125466e4b4a5069b47 Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo Date: Thu, 13 Jul 2023 21:01:08 +0200 Subject: tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs After activation of interrupts for TPM TIS drivers 0-day reports an interrupt storm on an Inspur NF5180M6 server. Fix this by detecting the storm and falling back to polling: Count the number of unhandled interrupts within a 10 ms time interval. In case that more than 1000 were unhandled deactivate interrupts entirely, deregister the handler and use polling instead. Also print a note to point to the tpm_tis_dmi_table. Since the interrupt deregistration function devm_free_irq() waits for all interrupt handlers to finish, only trigger a worker in the interrupt handler and do the unregistration in the worker to avoid a deadlock. Note: the storm detection logic equals the implementation in note_interrupt() which uses timestamps and counters stored in struct irq_desc. Since this structure is private to the generic interrupt core the TPM TIS core uses its own timestamps and counters. Furthermore the TPM interrupt handler always returns IRQ_HANDLED to prevent the generic interrupt core from processing the interrupt storm. Cc: stable@vger.kernel.org # v6.4+ Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202305041325.ae8b0c43-yujie.liu@intel.com/ Suggested-by: Lukas Wunner Signed-off-by: Lino Sanfilippo Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm_tis_core.c | 103 ++++++++++++++++++++++++++++++++++------ drivers/char/tpm/tpm_tis_core.h | 4 ++ 2 files changed, 92 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index 558144fa707a..88a5384c09c0 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -24,9 +24,12 @@ #include #include #include +#include #include "tpm.h" #include "tpm_tis_core.h" +#define TPM_TIS_MAX_UNHANDLED_IRQS 1000 + static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value); static bool wait_for_tpm_stat_cond(struct tpm_chip *chip, u8 mask, @@ -468,25 +471,29 @@ out_err: return rc; } -static void disable_interrupts(struct tpm_chip *chip) +static void __tpm_tis_disable_interrupts(struct tpm_chip *chip) +{ + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); + u32 int_mask = 0; + + tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &int_mask); + int_mask &= ~TPM_GLOBAL_INT_ENABLE; + tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), int_mask); + + chip->flags &= ~TPM_CHIP_FLAG_IRQ; +} + +static void tpm_tis_disable_interrupts(struct tpm_chip *chip) { struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); - u32 intmask; - int rc; if (priv->irq == 0) return; - rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask); - if (rc < 0) - intmask = 0; - - intmask &= ~TPM_GLOBAL_INT_ENABLE; - rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask); + __tpm_tis_disable_interrupts(chip); devm_free_irq(chip->dev.parent, priv->irq, chip); priv->irq = 0; - chip->flags &= ~TPM_CHIP_FLAG_IRQ; } /* @@ -552,7 +559,7 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len) if (!test_bit(TPM_TIS_IRQ_TESTED, &priv->flags)) tpm_msleep(1); if (!test_bit(TPM_TIS_IRQ_TESTED, &priv->flags)) - disable_interrupts(chip); + tpm_tis_disable_interrupts(chip); set_bit(TPM_TIS_IRQ_TESTED, &priv->flags); return rc; } @@ -752,6 +759,57 @@ static bool tpm_tis_req_canceled(struct tpm_chip *chip, u8 status) return status == TPM_STS_COMMAND_READY; } +static irqreturn_t tpm_tis_revert_interrupts(struct tpm_chip *chip) +{ + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); + const char *product; + const char *vendor; + + dev_warn(&chip->dev, FW_BUG + "TPM interrupt storm detected, polling instead\n"); + + vendor = dmi_get_system_info(DMI_SYS_VENDOR); + product = dmi_get_system_info(DMI_PRODUCT_VERSION); + + if (vendor && product) { + dev_info(&chip->dev, + "Consider adding the following entry to tpm_tis_dmi_table:\n"); + dev_info(&chip->dev, "\tDMI_SYS_VENDOR: %s\n", vendor); + dev_info(&chip->dev, "\tDMI_PRODUCT_VERSION: %s\n", product); + } + + if (tpm_tis_request_locality(chip, 0) != 0) + return IRQ_NONE; + + __tpm_tis_disable_interrupts(chip); + tpm_tis_relinquish_locality(chip, 0); + + schedule_work(&priv->free_irq_work); + + return IRQ_HANDLED; +} + +static irqreturn_t tpm_tis_update_unhandled_irqs(struct tpm_chip *chip) +{ + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev); + irqreturn_t irqret = IRQ_HANDLED; + + if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) + return IRQ_HANDLED; + + if (time_after(jiffies, priv->last_unhandled_irq + HZ/10)) + priv->unhandled_irqs = 1; + else + priv->unhandled_irqs++; + + priv->last_unhandled_irq = jiffies; + + if (priv->unhandled_irqs > TPM_TIS_MAX_UNHANDLED_IRQS) + irqret = tpm_tis_revert_interrupts(chip); + + return irqret; +} + static irqreturn_t tis_int_handler(int dummy, void *dev_id) { struct tpm_chip *chip = dev_id; @@ -761,10 +819,10 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id) rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt); if (rc < 0) - return IRQ_NONE; + goto err; if (interrupt == 0) - return IRQ_NONE; + goto err; set_bit(TPM_TIS_IRQ_TESTED, &priv->flags); if (interrupt & TPM_INTF_DATA_AVAIL_INT) @@ -780,10 +838,13 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id) rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt); tpm_tis_relinquish_locality(chip, 0); if (rc < 0) - return IRQ_NONE; + goto err; tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt); return IRQ_HANDLED; + +err: + return tpm_tis_update_unhandled_irqs(chip); } static void tpm_tis_gen_interrupt(struct tpm_chip *chip) @@ -804,6 +865,15 @@ static void tpm_tis_gen_interrupt(struct tpm_chip *chip) chip->flags &= ~TPM_CHIP_FLAG_IRQ; } +static void tpm_tis_free_irq_func(struct work_struct *work) +{ + struct tpm_tis_data *priv = container_of(work, typeof(*priv), free_irq_work); + struct tpm_chip *chip = priv->chip; + + devm_free_irq(chip->dev.parent, priv->irq, chip); + priv->irq = 0; +} + /* Register the IRQ and issue a command that will cause an interrupt. If an * irq is seen then leave the chip setup for IRQ operation, otherwise reverse * everything and leave in polling mode. Returns 0 on success. @@ -816,6 +886,7 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask, int rc; u32 int_status; + INIT_WORK(&priv->free_irq_work, tpm_tis_free_irq_func); rc = devm_request_threaded_irq(chip->dev.parent, irq, NULL, tis_int_handler, IRQF_ONESHOT | flags, @@ -918,6 +989,7 @@ void tpm_tis_remove(struct tpm_chip *chip) interrupt = 0; tpm_tis_write32(priv, reg, ~TPM_GLOBAL_INT_ENABLE & interrupt); + flush_work(&priv->free_irq_work); tpm_tis_clkrun_enable(chip, false); @@ -1021,6 +1093,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, chip->timeout_b = msecs_to_jiffies(TIS_TIMEOUT_B_MAX); chip->timeout_c = msecs_to_jiffies(TIS_TIMEOUT_C_MAX); chip->timeout_d = msecs_to_jiffies(TIS_TIMEOUT_D_MAX); + priv->chip = chip; priv->timeout_min = TPM_TIMEOUT_USECS_MIN; priv->timeout_max = TPM_TIMEOUT_USECS_MAX; priv->phy_ops = phy_ops; @@ -1179,7 +1252,7 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq, rc = tpm_tis_request_locality(chip, 0); if (rc < 0) goto out_err; - disable_interrupts(chip); + tpm_tis_disable_interrupts(chip); tpm_tis_relinquish_locality(chip, 0); } } diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h index 610bfadb6acf..b1a169d7d1ca 100644 --- a/drivers/char/tpm/tpm_tis_core.h +++ b/drivers/char/tpm/tpm_tis_core.h @@ -91,11 +91,15 @@ enum tpm_tis_flags { }; struct tpm_tis_data { + struct tpm_chip *chip; u16 manufacturer_id; struct mutex locality_count_mutex; unsigned int locality_count; int locality; int irq; + struct work_struct free_irq_work; + unsigned long last_unhandled_irq; + unsigned int unhandled_irqs; unsigned int int_mask; unsigned long flags; void __iomem *ilb_base_addr; -- cgit v1.2.3 From 1cd0787f082e1a179f2b6e749d08daff1a9f6b1b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 12 Jul 2023 15:25:23 -0700 Subject: drm/msm: Fix hw_fence error path cleanup In an error path where the submit is free'd without the job being run, the hw_fence pointer is simply a kzalloc'd block of memory. In this case we should just kfree() it, rather than trying to decrement it's reference count. Fortunately we can tell that this is the case by checking for a zero refcount, since if the job was run, the submit would be holding a reference to the hw_fence. Fixes: f94e6a51e17c ("drm/msm: Pre-allocate hw_fence") Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/547088/ --- drivers/gpu/drm/msm/msm_fence.c | 6 ++++++ drivers/gpu/drm/msm/msm_gem_submit.c | 14 +++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c index 96599ec3eb78..1a5d4f1c8b42 100644 --- a/drivers/gpu/drm/msm/msm_fence.c +++ b/drivers/gpu/drm/msm/msm_fence.c @@ -191,6 +191,12 @@ msm_fence_init(struct dma_fence *fence, struct msm_fence_context *fctx) f->fctx = fctx; + /* + * Until this point, the fence was just some pre-allocated memory, + * no-one should have taken a reference to it yet. + */ + WARN_ON(kref_read(&fence->refcount)); + dma_fence_init(&f->base, &msm_fence_ops, &fctx->spinlock, fctx->context, ++fctx->last_fence); } diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 3f1aa4de3b87..9d66498cdc04 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -86,7 +86,19 @@ void __msm_gem_submit_destroy(struct kref *kref) } dma_fence_put(submit->user_fence); - dma_fence_put(submit->hw_fence); + + /* + * If the submit is freed before msm_job_run(), then hw_fence is + * just some pre-allocated memory, not a reference counted fence. + * Once the job runs and the hw_fence is initialized, it will + * have a refcount of at least one, since the submit holds a ref + * to the hw_fence. + */ + if (kref_read(&submit->hw_fence->refcount) == 0) { + kfree(submit->hw_fence); + } else { + dma_fence_put(submit->hw_fence); + } put_pid(submit->pid); msm_submitqueue_put(submit->queue); -- cgit v1.2.3 From d05799d7b4a39fa71c65aa277128ac7c843ffcdc Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Mon, 17 Jul 2023 18:17:02 +0100 Subject: firmware: smccc: Fix use of uninitialised results structure Commit 35727af2b15d ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4") moved the initialisation of the SoC version to arm_smccc_version_init() but forgot to update the results structure and it's usage. Fix the use of the uninitialised results structure and update the error strings. Fixes: 35727af2b15d ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4") Signed-off-by: Punit Agrawal Cc: Sudeep Holla Cc: Marc Zyngier Cc: Vikram Sethi Cc: Shanker Donthineni Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20230717171702.424253-1-punit.agrawal@bytedance.com Signed-off-by: Sudeep Holla --- drivers/firmware/smccc/soc_id.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/smccc/soc_id.c b/drivers/firmware/smccc/soc_id.c index 890eb454599a..1990263fbba0 100644 --- a/drivers/firmware/smccc/soc_id.c +++ b/drivers/firmware/smccc/soc_id.c @@ -34,7 +34,6 @@ static struct soc_device_attribute *soc_dev_attr; static int __init smccc_soc_init(void) { - struct arm_smccc_res res; int soc_id_rev, soc_id_version; static char soc_id_str[20], soc_id_rev_str[12]; static char soc_id_jep106_id_str[12]; @@ -49,13 +48,13 @@ static int __init smccc_soc_init(void) } if (soc_id_version < 0) { - pr_err("ARCH_SOC_ID(0) returned error: %lx\n", res.a0); + pr_err("Invalid SoC Version: %x\n", soc_id_version); return -EINVAL; } soc_id_rev = arm_smccc_get_soc_id_revision(); if (soc_id_rev < 0) { - pr_err("ARCH_SOC_ID(1) returned error: %lx\n", res.a0); + pr_err("Invalid SoC Revision: %x\n", soc_id_rev); return -EINVAL; } -- cgit v1.2.3 From 81b233b8dd72f2d1df3da8bd4bd4f8c5e84937b9 Mon Sep 17 00:00:00 2001 From: Sukrut Bellary Date: Tue, 18 Jul 2023 01:55:29 -0700 Subject: firmware: arm_scmi: Fix signed error return values handling Handle signed error return values returned by simple_write_to_buffer(). In case of an error, return the error code. Fixes: 3c3d818a9317 ("firmware: arm_scmi: Add core raw transmission support") Reported-by: Dan Carpenter Signed-off-by: Sukrut Bellary Reviewed-by: Cristian Marussi Tested-by: Cristian Marussi Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/20230718085529.258899-1-sukrut.bellary@linux.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/raw_mode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/raw_mode.c b/drivers/firmware/arm_scmi/raw_mode.c index 6971dcf72fb9..0493aa3c12bf 100644 --- a/drivers/firmware/arm_scmi/raw_mode.c +++ b/drivers/firmware/arm_scmi/raw_mode.c @@ -818,10 +818,13 @@ static ssize_t scmi_dbg_raw_mode_common_write(struct file *filp, * before sending it with a single RAW xfer. */ if (rd->tx_size < rd->tx_req_size) { - size_t cnt; + ssize_t cnt; cnt = simple_write_to_buffer(rd->tx.buf, rd->tx.len, ppos, buf, count); + if (cnt < 0) + return cnt; + rd->tx_size += cnt; if (cnt < count) return cnt; -- cgit v1.2.3 From 2033ab90380d46e0e9f0520fd6776a73d107fd95 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sat, 15 Jul 2023 18:36:05 +0300 Subject: vrf: Fix lockdep splat in output path Cited commit converted the neighbour code to use the standard RCU variant instead of the RCU-bh variant, but the VRF code still uses rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup code in its IPv4 and IPv6 output paths, resulting in lockdep splats [1][2]. Can be reproduced using [3]. Fix by switching to rcu_read_lock() / rcu_read_unlock(). [1] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping/183: #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030 stack backtrace: CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output+0x1380/0x2030 ip_push_pending_frames+0x125/0x2a0 raw_sendmsg+0x200d/0x33c0 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [2] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping6/182: #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310 stack backtrace: CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output6+0xd32/0x1310 ip6_local_out+0xb4/0x1a0 ip6_send_skb+0xbc/0x340 ip6_push_pending_frames+0xe5/0x110 rawv6_sendmsg+0x2e6e/0x3e50 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [3] #!/bin/bash ip link add name vrf-red up numtxqueues 2 type vrf table 10 ip link add name swp1 up master vrf-red type dummy ip address add 192.0.2.1/24 dev swp1 ip address add 2001:db8:1::1/64 dev swp1 ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh") Reported-by: Naresh Kamboju Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/ Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com Signed-off-by: Paolo Abeni --- drivers/net/vrf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index bdb3a76a352e..6043e63b42f9 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -664,7 +664,7 @@ static int vrf_finish_output6(struct net *net, struct sock *sk, skb->protocol = htons(ETH_P_IPV6); skb->dev = dev; - rcu_read_lock_bh(); + rcu_read_lock(); nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr); neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop); if (unlikely(!neigh)) @@ -672,10 +672,10 @@ static int vrf_finish_output6(struct net *net, struct sock *sk, if (!IS_ERR(neigh)) { sock_confirm_neigh(skb, neigh); ret = neigh_output(neigh, skb, false); - rcu_read_unlock_bh(); + rcu_read_unlock(); return ret; } - rcu_read_unlock_bh(); + rcu_read_unlock(); IP6_INC_STATS(dev_net(dst->dev), ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES); @@ -889,7 +889,7 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s } } - rcu_read_lock_bh(); + rcu_read_lock(); neigh = ip_neigh_for_gw(rt, skb, &is_v6gw); if (!IS_ERR(neigh)) { @@ -898,11 +898,11 @@ static int vrf_finish_output(struct net *net, struct sock *sk, struct sk_buff *s sock_confirm_neigh(skb, neigh); /* if crossing protocols, can not use the cached header */ ret = neigh_output(neigh, skb, is_v6gw); - rcu_read_unlock_bh(); + rcu_read_unlock(); return ret; } - rcu_read_unlock_bh(); + rcu_read_unlock(); vrf_tx_error(skb->dev, skb); return -EINVAL; } -- cgit v1.2.3 From 5c719d7aef298e9b727f39b45e88528a96df3620 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 17 Jul 2023 21:55:56 +0200 Subject: RDMA/rxe: Fix an error handling path in rxe_bind_mw() All errors go to the error handling path, except this one. Be consistent and also branch to it. Fixes: 02ed253770fb ("RDMA/rxe: Introduce rxe access supported flags") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/43698d8a3ed4e720899eadac887427f73d7ec2eb.1689623735.git.christophe.jaillet@wanadoo.fr Reviewed-by: Bob Pearson Acked-by: Zhu Yanjun Signed-off-by: Leon Romanovsky --- drivers/infiniband/sw/rxe/rxe_mw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe_mw.c b/drivers/infiniband/sw/rxe/rxe_mw.c index d8a43d87de93..d9312b5c9d20 100644 --- a/drivers/infiniband/sw/rxe/rxe_mw.c +++ b/drivers/infiniband/sw/rxe/rxe_mw.c @@ -199,7 +199,8 @@ int rxe_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe) if (access & ~RXE_ACCESS_SUPPORTED_MW) { rxe_err_mw(mw, "access %#x not supported", access); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto err_drop_mr; } spin_lock_bh(&mw->lock); -- cgit v1.2.3 From 8fcd7c7b3a38ab5e452f542fda8f7940e77e479a Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Sun, 16 Jul 2023 15:07:41 +0530 Subject: octeontx2-pf: Dont allocate BPIDs for LBK interfaces Current driver enables backpressure for LBK interfaces. But these interfaces do not support this feature. Hence, this patch fixes the issue by skipping the backpressure configuration for these interfaces. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by: Geetha sowjanya Signed-off-by: Sunil Goutham Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index fe8ea4e531b7..9551b422622a 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1454,8 +1454,9 @@ static int otx2_init_hw_resources(struct otx2_nic *pf) if (err) goto err_free_npa_lf; - /* Enable backpressure */ - otx2_nix_config_bp(pf, true); + /* Enable backpressure for CGX mapped PF/VFs */ + if (!is_otx2_lbkvf(pf->pdev)) + otx2_nix_config_bp(pf, true); /* Init Auras and pools used by NIX RQ, for free buffer ptrs */ err = otx2_rq_aura_pool_init(pf); -- cgit v1.2.3 From 4cf67d3cc9994a59cf77bb9c0ccf9007fe916afe Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 14 Jul 2023 02:31:45 -0700 Subject: cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() KASAN and KFENCE detected an user-after-free in the CXL driver. This happens in the cxl_decoder_add() fail path. KASAN prints the following error: BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299) This happens in cxl_parse_cfmws(), where put_device() is called, releasing cxld, which is accessed later. Use the local variables in the dev_err() instead of pointing to the released memory. Since the dev_err() is printing a resource, change the open coded print format to use the %pr format specifier. Fixes: e50fe01e1f2a ("cxl/core: Drop ->platform_res attribute for root decoders") Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org Reviewed-by: Alison Schofield Reviewed-by: Dave Jiang Reviewed-by: Jonathan Cameron Signed-off-by: Vishal Verma --- drivers/cxl/acpi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c index 658e6b84a769..33c073f0d7fe 100644 --- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -296,8 +296,7 @@ err_xormap: else rc = cxl_decoder_autoremove(dev, cxld); if (rc) { - dev_err(dev, "Failed to add decode range [%#llx - %#llx]\n", - cxld->hpa_range.start, cxld->hpa_range.end); + dev_err(dev, "Failed to add decode range: %pr", res); return 0; } dev_dbg(dev, "add: %s node: %d range [%#llx - %#llx]\n", -- cgit v1.2.3 From 91019b5bc7c2c5e6f676cce80ee6d12b2753d018 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 14 Jul 2023 02:31:46 -0700 Subject: cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws() Driver initialization returned success (return 0) even if the initialization (cxl_decoder_add() or acpi_table_parse_cedt()) failed. Return the error instead of swallowing it. Fixes: f4ce1f766f1e ("cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers") Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20230714093146.2253438-2-leitao@debian.org Reviewed-by: Alison Schofield Signed-off-by: Vishal Verma --- drivers/cxl/acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c index 33c073f0d7fe..d1c559879dcc 100644 --- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -297,7 +297,7 @@ err_xormap: rc = cxl_decoder_autoremove(dev, cxld); if (rc) { dev_err(dev, "Failed to add decode range: %pr", res); - return 0; + return rc; } dev_dbg(dev, "add: %s node: %d range [%#llx - %#llx]\n", dev_name(&cxld->dev), -- cgit v1.2.3 From 60a2dae4902015f43d144f5a4710f655b2955b9b Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Fri, 7 Jul 2023 21:26:10 -0500 Subject: drm/amd: Use amdgpu_device_pcie_dynamic_switching_supported() for SMU7 SMU7 does a check if the dGPU is inserted into a Rocket Lake system, to turn off DPM. Extend this check to all systems that have problems with dynamic switching by using the amdgpu_device_pcie_dynamic_switching_supported() helper. Signed-off-by: Mario Limonciello Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c index 6841a4bce186..1cb402264497 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c @@ -1798,17 +1798,6 @@ static int smu7_disable_dpm_tasks(struct pp_hwmgr *hwmgr) return result; } -static bool intel_core_rkl_chk(void) -{ -#if IS_ENABLED(CONFIG_X86_64) - struct cpuinfo_x86 *c = &cpu_data(0); - - return (c->x86 == 6 && c->x86_model == INTEL_FAM6_ROCKETLAKE); -#else - return false; -#endif -} - static void smu7_init_dpm_defaults(struct pp_hwmgr *hwmgr) { struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); @@ -1835,7 +1824,8 @@ static void smu7_init_dpm_defaults(struct pp_hwmgr *hwmgr) data->mclk_dpm_key_disabled = hwmgr->feature_mask & PP_MCLK_DPM_MASK ? false : true; data->sclk_dpm_key_disabled = hwmgr->feature_mask & PP_SCLK_DPM_MASK ? false : true; data->pcie_dpm_key_disabled = - intel_core_rkl_chk() || !(hwmgr->feature_mask & PP_PCIE_DPM_MASK); + !amdgpu_device_pcie_dynamic_switching_supported() || + !(hwmgr->feature_mask & PP_PCIE_DPM_MASK); /* need to set voltage control types before EVV patching */ data->voltage_control = SMU7_VOLTAGE_CONTROL_NONE; data->vddci_control = SMU7_VOLTAGE_CONTROL_NONE; -- cgit v1.2.3 From 2ed5a4c4615b47c70dcd8d7d942207e5a607561d Mon Sep 17 00:00:00 2001 From: Aurabindo Pillai Date: Tue, 11 Jul 2023 14:14:43 -0400 Subject: drm/amd/display: export some optc function for reuse [Why&How] Make a few functions non static so that they can be reused for other asic. This is in preparation for separating out OTG programming sequence for DCN301 Fixes: 1598fc576420 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+") Reviewed-by: Swapnil Patel Signed-off-by: Aurabindo Pillai Tested-by: Guilherme G. Piccoli Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h | 3 +++ 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c index dfb8f62765f2..5bf4d0aa6230 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.c @@ -215,7 +215,7 @@ void optc3_set_odm_bypass(struct timing_generator *optc, optc1->opp_count = 1; } -static void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt, +void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt, struct dc_crtc_timing *timing) { struct optc *optc1 = DCN10TG_FROM_TG(optc); @@ -293,7 +293,7 @@ static void optc3_set_timing_double_buffer(struct timing_generator *optc, bool e OTG_DRR_TIMING_DBUF_UPDATE_MODE, mode); } -static void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc) +void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc) { struct optc *optc1 = DCN10TG_FROM_TG(optc); diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h index fb06dc9a4893..d3a056c12b0d 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.h @@ -351,6 +351,9 @@ void optc3_set_timing_db_mode(struct timing_generator *optc, bool enable); void optc3_set_odm_bypass(struct timing_generator *optc, const struct dc_crtc_timing *dc_crtc_timing); +void optc3_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_cnt, + struct dc_crtc_timing *timing); +void optc3_wait_drr_doublebuffer_pending_clear(struct timing_generator *optc); void optc3_tg_init(struct timing_generator *optc); void optc3_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max); #endif /* __DC_OPTC_DCN30_H__ */ -- cgit v1.2.3 From d1792509e1031a6750f82bc7faa5fc9d7203b5b7 Mon Sep 17 00:00:00 2001 From: Aurabindo Pillai Date: Wed, 12 Jul 2023 12:35:16 -0400 Subject: drm/amd/display: add DCN301 specific logic for OTG programming [Why&How] DCN301 does not have FAMS hence the workaround needed on other DCN3x variants related to OTG min/max selector programming is not applicable for it. Hence isolate it and have it use the old sequence without workaround. Fixes: 1598fc576420 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+") Reviewed-by: Swapnil Patel Signed-off-by: Aurabindo Pillai Tested-by: Guilherme G. Piccoli Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn301/Makefile | 3 +- .../gpu/drm/amd/display/dc/dcn301/dcn301_optc.c | 185 +++++++++++++++++++++ .../gpu/drm/amd/display/dc/dcn301/dcn301_optc.h | 36 ++++ .../drm/amd/display/dc/dcn301/dcn301_resource.c | 4 +- 4 files changed, 225 insertions(+), 3 deletions(-) create mode 100644 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c create mode 100644 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/Makefile b/drivers/gpu/drm/amd/display/dc/dcn301/Makefile index 7aa628c21973..9002cb10a6ae 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn301/Makefile +++ b/drivers/gpu/drm/amd/display/dc/dcn301/Makefile @@ -11,7 +11,8 @@ # Makefile for dcn30. DCN301 = dcn301_init.o dcn301_resource.o dcn301_dccg.o \ - dcn301_dio_link_encoder.o dcn301_hwseq.o dcn301_panel_cntl.o dcn301_hubbub.o + dcn301_dio_link_encoder.o dcn301_hwseq.o dcn301_panel_cntl.o dcn301_hubbub.o \ + dcn301_optc.o AMD_DAL_DCN301 = $(addprefix $(AMDDALPATH)/dc/dcn301/,$(DCN301)) diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c new file mode 100644 index 000000000000..b3cfcb887905 --- /dev/null +++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.c @@ -0,0 +1,185 @@ +/* + * Copyright 2020 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +#include "reg_helper.h" +#include "dcn301_optc.h" +#include "dc.h" +#include "dcn_calc_math.h" +#include "dc_dmub_srv.h" + +#include "dml/dcn30/dcn30_fpu.h" +#include "dc_trace.h" + +#define REG(reg)\ + optc1->tg_regs->reg + +#define CTX \ + optc1->base.ctx + +#undef FN +#define FN(reg_name, field_name) \ + optc1->tg_shift->field_name, optc1->tg_mask->field_name + + +/** + * optc301_set_drr() - Program dynamic refresh rate registers m_OTGx_OTG_V_TOTAL_*. + * + * @optc: timing_generator instance. + * @params: parameters used for Dynamic Refresh Rate. + */ +void optc301_set_drr( + struct timing_generator *optc, + const struct drr_params *params) +{ + struct optc *optc1 = DCN10TG_FROM_TG(optc); + + if (params != NULL && + params->vertical_total_max > 0 && + params->vertical_total_min > 0) { + + if (params->vertical_total_mid != 0) { + + REG_SET(OTG_V_TOTAL_MID, 0, + OTG_V_TOTAL_MID, params->vertical_total_mid - 1); + + REG_UPDATE_2(OTG_V_TOTAL_CONTROL, + OTG_VTOTAL_MID_REPLACING_MAX_EN, 1, + OTG_VTOTAL_MID_FRAME_NUM, + (uint8_t)params->vertical_total_mid_frame_num); + + } + + optc->funcs->set_vtotal_min_max(optc, params->vertical_total_min - 1, params->vertical_total_max - 1); + + REG_UPDATE_5(OTG_V_TOTAL_CONTROL, + OTG_V_TOTAL_MIN_SEL, 1, + OTG_V_TOTAL_MAX_SEL, 1, + OTG_FORCE_LOCK_ON_EVENT, 0, + OTG_SET_V_TOTAL_MIN_MASK_EN, 0, + OTG_SET_V_TOTAL_MIN_MASK, 0); + // Setup manual flow control for EOF via TRIG_A + optc->funcs->setup_manual_trigger(optc); + + } else { + REG_UPDATE_4(OTG_V_TOTAL_CONTROL, + OTG_SET_V_TOTAL_MIN_MASK, 0, + OTG_V_TOTAL_MIN_SEL, 0, + OTG_V_TOTAL_MAX_SEL, 0, + OTG_FORCE_LOCK_ON_EVENT, 0); + + optc->funcs->set_vtotal_min_max(optc, 0, 0); + } +} + + +void optc301_setup_manual_trigger(struct timing_generator *optc) +{ + struct optc *optc1 = DCN10TG_FROM_TG(optc); + + REG_SET_8(OTG_TRIGA_CNTL, 0, + OTG_TRIGA_SOURCE_SELECT, 21, + OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst, + OTG_TRIGA_RISING_EDGE_DETECT_CNTL, 1, + OTG_TRIGA_FALLING_EDGE_DETECT_CNTL, 0, + OTG_TRIGA_POLARITY_SELECT, 0, + OTG_TRIGA_FREQUENCY_SELECT, 0, + OTG_TRIGA_DELAY, 0, + OTG_TRIGA_CLEAR, 1); +} + +static struct timing_generator_funcs dcn30_tg_funcs = { + .validate_timing = optc1_validate_timing, + .program_timing = optc1_program_timing, + .setup_vertical_interrupt0 = optc1_setup_vertical_interrupt0, + .setup_vertical_interrupt1 = optc1_setup_vertical_interrupt1, + .setup_vertical_interrupt2 = optc1_setup_vertical_interrupt2, + .program_global_sync = optc1_program_global_sync, + .enable_crtc = optc2_enable_crtc, + .disable_crtc = optc1_disable_crtc, + /* used by enable_timing_synchronization. Not need for FPGA */ + .is_counter_moving = optc1_is_counter_moving, + .get_position = optc1_get_position, + .get_frame_count = optc1_get_vblank_counter, + .get_scanoutpos = optc1_get_crtc_scanoutpos, + .get_otg_active_size = optc1_get_otg_active_size, + .set_early_control = optc1_set_early_control, + /* used by enable_timing_synchronization. Not need for FPGA */ + .wait_for_state = optc1_wait_for_state, + .set_blank_color = optc3_program_blank_color, + .did_triggered_reset_occur = optc1_did_triggered_reset_occur, + .triplebuffer_lock = optc3_triplebuffer_lock, + .triplebuffer_unlock = optc2_triplebuffer_unlock, + .enable_reset_trigger = optc1_enable_reset_trigger, + .enable_crtc_reset = optc1_enable_crtc_reset, + .disable_reset_trigger = optc1_disable_reset_trigger, + .lock = optc3_lock, + .unlock = optc1_unlock, + .lock_doublebuffer_enable = optc3_lock_doublebuffer_enable, + .lock_doublebuffer_disable = optc3_lock_doublebuffer_disable, + .enable_optc_clock = optc1_enable_optc_clock, + .set_drr = optc301_set_drr, + .get_last_used_drr_vtotal = optc2_get_last_used_drr_vtotal, + .set_vtotal_min_max = optc3_set_vtotal_min_max, + .set_static_screen_control = optc1_set_static_screen_control, + .program_stereo = optc1_program_stereo, + .is_stereo_left_eye = optc1_is_stereo_left_eye, + .tg_init = optc3_tg_init, + .is_tg_enabled = optc1_is_tg_enabled, + .is_optc_underflow_occurred = optc1_is_optc_underflow_occurred, + .clear_optc_underflow = optc1_clear_optc_underflow, + .setup_global_swap_lock = NULL, + .get_crc = optc1_get_crc, + .configure_crc = optc2_configure_crc, + .set_dsc_config = optc3_set_dsc_config, + .get_dsc_status = optc2_get_dsc_status, + .set_dwb_source = NULL, + .set_odm_bypass = optc3_set_odm_bypass, + .set_odm_combine = optc3_set_odm_combine, + .get_optc_source = optc2_get_optc_source, + .set_out_mux = optc3_set_out_mux, + .set_drr_trigger_window = optc3_set_drr_trigger_window, + .set_vtotal_change_limit = optc3_set_vtotal_change_limit, + .set_gsl = optc2_set_gsl, + .set_gsl_source_select = optc2_set_gsl_source_select, + .set_vtg_params = optc1_set_vtg_params, + .program_manual_trigger = optc2_program_manual_trigger, + .setup_manual_trigger = optc301_setup_manual_trigger, + .get_hw_timing = optc1_get_hw_timing, + .wait_drr_doublebuffer_pending_clear = optc3_wait_drr_doublebuffer_pending_clear, +}; + +void dcn301_timing_generator_init(struct optc *optc1) +{ + optc1->base.funcs = &dcn30_tg_funcs; + + optc1->max_h_total = optc1->tg_mask->OTG_H_TOTAL + 1; + optc1->max_v_total = optc1->tg_mask->OTG_V_TOTAL + 1; + + optc1->min_h_blank = 32; + optc1->min_v_blank = 3; + optc1->min_v_blank_interlace = 5; + optc1->min_h_sync_width = 4; + optc1->min_v_sync_width = 1; +} diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h new file mode 100644 index 000000000000..b49585682a15 --- /dev/null +++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_optc.h @@ -0,0 +1,36 @@ +/* + * Copyright 2020 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +#ifndef __DC_OPTC_DCN301_H__ +#define __DC_OPTC_DCN301_H__ + +#include "dcn20/dcn20_optc.h" +#include "dcn30/dcn30_optc.h" + +void dcn301_timing_generator_init(struct optc *optc1); +void optc301_setup_manual_trigger(struct timing_generator *optc); +void optc301_set_drr(struct timing_generator *optc, const struct drr_params *params); + +#endif /* __DC_OPTC_DCN301_H__ */ diff --git a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c index 3485fbb1093e..1bee9a4636e6 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_resource.c @@ -42,7 +42,7 @@ #include "dcn30/dcn30_hubp.h" #include "irq/dcn30/irq_service_dcn30.h" #include "dcn30/dcn30_dpp.h" -#include "dcn30/dcn30_optc.h" +#include "dcn301/dcn301_optc.h" #include "dcn20/dcn20_hwseq.h" #include "dcn30/dcn30_hwseq.h" #include "dce110/dce110_hw_sequencer.h" @@ -855,7 +855,7 @@ static struct timing_generator *dcn301_timing_generator_create( tgn10->tg_shift = &optc_shift; tgn10->tg_mask = &optc_mask; - dcn30_timing_generator_init(tgn10); + dcn301_timing_generator_init(tgn10); return &tgn10->base; } -- cgit v1.2.3 From b42ae87a7b3878afaf4c3852ca66c025a5b996e0 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Thu, 6 Jul 2023 15:57:21 +0800 Subject: drm/amdgpu/vkms: relax timer deactivation by hrtimer_try_to_cancel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In below thousands of screen rotation loop tests with virtual display enabled, a CPU hard lockup issue may happen, leading system to unresponsive and crash. do { xrandr --output Virtual --rotate inverted xrandr --output Virtual --rotate right xrandr --output Virtual --rotate left xrandr --output Virtual --rotate normal } while (1); NMI watchdog: Watchdog detected hard LOCKUP on cpu 1 ? hrtimer_run_softirq+0x140/0x140 ? store_vblank+0xe0/0xe0 [drm] hrtimer_cancel+0x15/0x30 amdgpu_vkms_disable_vblank+0x15/0x30 [amdgpu] drm_vblank_disable_and_save+0x185/0x1f0 [drm] drm_crtc_vblank_off+0x159/0x4c0 [drm] ? record_print_text.cold+0x11/0x11 ? wait_for_completion_timeout+0x232/0x280 ? drm_crtc_wait_one_vblank+0x40/0x40 [drm] ? bit_wait_io_timeout+0xe0/0xe0 ? wait_for_completion_interruptible+0x1d7/0x320 ? mutex_unlock+0x81/0xd0 amdgpu_vkms_crtc_atomic_disable It's caused by a stuck in lock dependency in such scenario on different CPUs. CPU1 CPU2 drm_crtc_vblank_off hrtimer_interrupt grab event_lock (irq disabled) __hrtimer_run_queues grab vbl_lock/vblank_time_block amdgpu_vkms_vblank_simulate amdgpu_vkms_disable_vblank drm_handle_vblank hrtimer_cancel grab dev->event_lock So CPU1 stucks in hrtimer_cancel as timer callback is running endless on current clock base, as that timer queue on CPU2 has no chance to finish it because of failing to hold the lock. So NMI watchdog will throw the errors after its threshold, and all later CPUs are impacted/blocked. So use hrtimer_try_to_cancel to fix this, as disable_vblank callback does not need to wait the handler to finish. And also it's not necessary to check the return value of hrtimer_try_to_cancel, because even if it's -1 which means current timer callback is running, it will be reprogrammed in hrtimer_start with calling enable_vblank to make it works. v2: only re-arm timer when vblank is enabled (Christian) and add a Fixes tag as well v3: drop warn printing (Christian) v4: drop superfluous check of blank->enabled in timer function, as it's guaranteed in drm_handle_vblank (Christian) Fixes: 84ec374bd580 ("drm/amdgpu: create amdgpu_vkms (v4)") Cc: stable@vger.kernel.org Suggested-by: Christian König Signed-off-by: Guchun Chen Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c index 53ff91fc6cf6..d0748bcfad16 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vkms.c @@ -55,8 +55,9 @@ static enum hrtimer_restart amdgpu_vkms_vblank_simulate(struct hrtimer *timer) DRM_WARN("%s: vblank timer overrun\n", __func__); ret = drm_crtc_handle_vblank(crtc); + /* Don't queue timer again when vblank is disabled. */ if (!ret) - DRM_ERROR("amdgpu_vkms failure on handling vblank"); + return HRTIMER_NORESTART; return HRTIMER_RESTART; } @@ -81,7 +82,7 @@ static void amdgpu_vkms_disable_vblank(struct drm_crtc *crtc) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - hrtimer_cancel(&amdgpu_crtc->vblank_timer); + hrtimer_try_to_cancel(&amdgpu_crtc->vblank_timer); } static bool amdgpu_vkms_get_vblank_timestamp(struct drm_crtc *crtc, -- cgit v1.2.3 From 1ca67aba8d11c2849d395013e1fdce02918d5657 Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Wed, 21 Jun 2023 17:24:59 -0300 Subject: drm/amd/display: only accept async flips for fast updates MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Up until now, amdgpu was silently degrading to vsync when user-space requested an async flip but the hardware didn't support it. The hardware doesn't support immediate flips when the update changes the FB pitch, the DCC state, the rotation, enables or disables CRTCs or planes, etc. This is reflected in the dm_crtc_state.update_type field: UPDATE_TYPE_FAST means that immediate flip is supported. Silently degrading async flips to vsync is not the expected behavior from a uAPI point-of-view. Xorg expects async flips to fail if unsupported, to be able to fall back to a blit. i915 already behaves this way. This patch aligns amdgpu with uAPI expectations and returns a failure when an async flip is not possible. Signed-off-by: Simon Ser Reviewed-by: André Almeida Reviewed-by: Alex Deucher Reviewed-by: Harry Wentland Signed-off-by: André Almeida Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 8 ++++++++ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c | 12 ++++++++++++ 2 files changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ff0a217b9d56..391130c3a0d5 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -8125,7 +8125,15 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, * Only allow immediate flips for fast updates that don't * change memory domain, FB pitch, DCC state, rotation or * mirroring. + * + * dm_crtc_helper_atomic_check() only accepts async flips with + * fast updates. */ + if (crtc->state->async_flip && + acrtc_state->update_type != UPDATE_TYPE_FAST) + drm_warn_once(state->dev, + "[PLANE:%d:%s] async flip with non-fast update\n", + plane->base.id, plane->name); bundle->flip_addrs[planes_count].flip_immediate = crtc->state->async_flip && acrtc_state->update_type == UPDATE_TYPE_FAST && diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c index 440fc0869a34..30d4c6fd95f5 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crtc.c @@ -398,6 +398,18 @@ static int dm_crtc_helper_atomic_check(struct drm_crtc *crtc, return -EINVAL; } + /* + * Only allow async flips for fast updates that don't change the FB + * pitch, the DCC state, rotation, etc. + */ + if (crtc_state->async_flip && + dm_crtc_state->update_type != UPDATE_TYPE_FAST) { + drm_dbg_atomic(crtc->dev, + "[CRTC:%d:%s] async flips are only supported for fast updates\n", + crtc->base.id, crtc->name); + return -EINVAL; + } + /* In some use cases, like reset, no stream is attached */ if (!dm_crtc_state->stream) return 0; -- cgit v1.2.3 From a4eb11824170d742531998f4ebd1c6a18b63db47 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Jun 2023 12:15:38 -0400 Subject: drm/amdgpu/pm: make gfxclock consistent for sienna cichlid Use average gfxclock for consistency with other dGPUs. Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.1.x --- drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c index f6599c00a6fd..0cda3b276f61 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c @@ -1927,12 +1927,16 @@ static int sienna_cichlid_read_sensor(struct smu_context *smu, *size = 4; break; case AMDGPU_PP_SENSOR_GFX_MCLK: - ret = sienna_cichlid_get_current_clk_freq_by_table(smu, SMU_UCLK, (uint32_t *)data); + ret = sienna_cichlid_get_smu_metrics_data(smu, + METRICS_CURR_UCLK, + (uint32_t *)data); *(uint32_t *)data *= 100; *size = 4; break; case AMDGPU_PP_SENSOR_GFX_SCLK: - ret = sienna_cichlid_get_current_clk_freq_by_table(smu, SMU_GFXCLK, (uint32_t *)data); + ret = sienna_cichlid_get_smu_metrics_data(smu, + METRICS_AVERAGE_GFXCLK, + (uint32_t *)data); *(uint32_t *)data *= 100; *size = 4; break; -- cgit v1.2.3 From 068c8bb10f37bb84824625dbbda053a3a3e0d6e1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Jun 2023 12:36:17 -0400 Subject: drm/amdgpu/pm: make mclk consistent for smu 13.0.7 Use current uclk to be consistent with other dGPUs. Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.1.x --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c index 3ba02131e682..b1f0937ccade 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c @@ -949,7 +949,7 @@ static int smu_v13_0_7_read_sensor(struct smu_context *smu, break; case AMDGPU_PP_SENSOR_GFX_MCLK: ret = smu_v13_0_7_get_smu_metrics_data(smu, - METRICS_AVERAGE_UCLK, + METRICS_CURR_UCLK, (uint32_t *)data); *(uint32_t *)data *= 100; *size = 4; -- cgit v1.2.3 From b9c2213cdf254fba71b6bd602a0afe051e554ad9 Mon Sep 17 00:00:00 2001 From: Candice Li Date: Wed, 5 Jul 2023 15:00:45 +0800 Subject: drm/amdgpu: Allow the initramfs generator to include psp_13_0_6_ta Allow the initramfs generator to automatically include psp_13_0_6_ta firmware to initramfs. Signed-off-by: Candice Li Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/psp_v13_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c index f9cb0d2c89d1..e1a392bcea70 100644 --- a/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c +++ b/drivers/gpu/drm/amd/amdgpu/psp_v13_0.c @@ -49,6 +49,7 @@ MODULE_FIRMWARE("amdgpu/psp_13_0_10_ta.bin"); MODULE_FIRMWARE("amdgpu/psp_13_0_11_toc.bin"); MODULE_FIRMWARE("amdgpu/psp_13_0_11_ta.bin"); MODULE_FIRMWARE("amdgpu/psp_13_0_6_sos.bin"); +MODULE_FIRMWARE("amdgpu/psp_13_0_6_ta.bin"); /* For large FW files the time to complete can be very long */ #define USBC_PD_POLLING_LIMIT_S 240 -- cgit v1.2.3 From 87279fdf5ee0ad1360765ef70389d1c4d0f81bb6 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Sat, 17 Jun 2023 21:09:46 +0530 Subject: drm/amd/display: Clean up errors & warnings in amdgpu_dm.c Fix the following errors & warnings reported by checkpatch: ERROR: space required before the open brace '{' ERROR: space required before the open parenthesis '(' ERROR: that open brace { should be on the previous line ERROR: space prohibited before that ',' (ctx:WxW) ERROR: else should follow close brace '}' ERROR: open brace '{' following function definitions go on the next line ERROR: code indent should use tabs where possible WARNING: braces {} are not necessary for single statement blocks WARNING: void function return statements are not generally useful WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Cc: Alex Deucher Signed-off-by: Srinivasan Shanmugam Reviewed-by: Rodrigo Siqueira Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 133 +++++++++++----------- 1 file changed, 65 insertions(+), 68 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 391130c3a0d5..948d61845efd 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -424,12 +424,12 @@ static void dm_pflip_high_irq(void *interrupt_params) spin_lock_irqsave(&adev_to_drm(adev)->event_lock, flags); - if (amdgpu_crtc->pflip_status != AMDGPU_FLIP_SUBMITTED){ - DC_LOG_PFLIP("amdgpu_crtc->pflip_status = %d !=AMDGPU_FLIP_SUBMITTED(%d) on crtc:%d[%p] \n", - amdgpu_crtc->pflip_status, - AMDGPU_FLIP_SUBMITTED, - amdgpu_crtc->crtc_id, - amdgpu_crtc); + if (amdgpu_crtc->pflip_status != AMDGPU_FLIP_SUBMITTED) { + DC_LOG_PFLIP("amdgpu_crtc->pflip_status = %d !=AMDGPU_FLIP_SUBMITTED(%d) on crtc:%d[%p]\n", + amdgpu_crtc->pflip_status, + AMDGPU_FLIP_SUBMITTED, + amdgpu_crtc->crtc_id, + amdgpu_crtc); spin_unlock_irqrestore(&adev_to_drm(adev)->event_lock, flags); return; } @@ -883,7 +883,7 @@ static int dm_set_powergating_state(void *handle, } /* Prototypes of private functions */ -static int dm_early_init(void* handle); +static int dm_early_init(void *handle); /* Allocate memory for FBC compressed data */ static void amdgpu_dm_fbc_init(struct drm_connector *connector) @@ -1282,7 +1282,7 @@ static void mmhub_read_system_context(struct amdgpu_device *adev, struct dc_phy_ pa_config->system_aperture.start_addr = (uint64_t)logical_addr_low << 18; pa_config->system_aperture.end_addr = (uint64_t)logical_addr_high << 18; - pa_config->system_aperture.agp_base = (uint64_t)agp_base << 24 ; + pa_config->system_aperture.agp_base = (uint64_t)agp_base << 24; pa_config->system_aperture.agp_bot = (uint64_t)agp_bot << 24; pa_config->system_aperture.agp_top = (uint64_t)agp_top << 24; @@ -1365,8 +1365,7 @@ static void dm_handle_hpd_rx_offload_work(struct work_struct *work) DP_TEST_RESPONSE, &test_response.raw, sizeof(test_response)); - } - else if ((dc_link->connector_signal != SIGNAL_TYPE_EDP) && + } else if ((dc_link->connector_signal != SIGNAL_TYPE_EDP) && dc_link_check_link_loss_status(dc_link, &offload_work->data) && dc_link_dp_allow_hpd_rx_irq(dc_link)) { /* offload_work->data is from handle_hpd_rx_irq-> @@ -1554,7 +1553,7 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) mutex_init(&adev->dm.dc_lock); mutex_init(&adev->dm.audio_lock); - if(amdgpu_dm_irq_init(adev)) { + if (amdgpu_dm_irq_init(adev)) { DRM_ERROR("amdgpu: failed to initialize DM IRQ support.\n"); goto error; } @@ -1696,9 +1695,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev) if (amdgpu_dc_debug_mask & DC_DISABLE_STUTTER) adev->dm.dc->debug.disable_stutter = true; - if (amdgpu_dc_debug_mask & DC_DISABLE_DSC) { + if (amdgpu_dc_debug_mask & DC_DISABLE_DSC) adev->dm.dc->debug.disable_dsc = true; - } if (amdgpu_dc_debug_mask & DC_DISABLE_CLOCK_GATING) adev->dm.dc->debug.disable_clock_gate = true; @@ -1942,8 +1940,6 @@ static void amdgpu_dm_fini(struct amdgpu_device *adev) mutex_destroy(&adev->dm.audio_lock); mutex_destroy(&adev->dm.dc_lock); mutex_destroy(&adev->dm.dpia_aux_lock); - - return; } static int load_dmcu_fw(struct amdgpu_device *adev) @@ -1952,7 +1948,7 @@ static int load_dmcu_fw(struct amdgpu_device *adev) int r; const struct dmcu_firmware_header_v1_0 *hdr; - switch(adev->asic_type) { + switch (adev->asic_type) { #if defined(CONFIG_DRM_AMD_DC_SI) case CHIP_TAHITI: case CHIP_PITCAIRN: @@ -2709,7 +2705,7 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state, struct dc_scaling_info scaling_infos[MAX_SURFACES]; struct dc_flip_addrs flip_addrs[MAX_SURFACES]; struct dc_stream_update stream_update; - } * bundle; + } *bundle; int k, m; bundle = kzalloc(sizeof(*bundle), GFP_KERNEL); @@ -2739,8 +2735,6 @@ static void dm_gpureset_commit_state(struct dc_state *dc_state, cleanup: kfree(bundle); - - return; } static int dm_resume(void *handle) @@ -2954,8 +2948,7 @@ static const struct amd_ip_funcs amdgpu_dm_funcs = { .set_powergating_state = dm_set_powergating_state, }; -const struct amdgpu_ip_block_version dm_ip_block = -{ +const struct amdgpu_ip_block_version dm_ip_block = { .type = AMD_IP_BLOCK_TYPE_DCE, .major = 1, .minor = 0, @@ -3000,9 +2993,12 @@ static void update_connector_ext_caps(struct amdgpu_dm_connector *aconnector) caps->ext_caps = &aconnector->dc_link->dpcd_sink_ext_caps; caps->aux_support = false; - if (caps->ext_caps->bits.oled == 1 /*|| - caps->ext_caps->bits.sdr_aux_backlight_control == 1 || - caps->ext_caps->bits.hdr_aux_backlight_control == 1*/) + if (caps->ext_caps->bits.oled == 1 + /* + * || + * caps->ext_caps->bits.sdr_aux_backlight_control == 1 || + * caps->ext_caps->bits.hdr_aux_backlight_control == 1 + */) caps->aux_support = true; if (amdgpu_backlight == 0) @@ -3269,6 +3265,7 @@ static void dm_handle_mst_sideband_msg(struct amdgpu_dm_connector *aconnector) process_count < max_process_count) { u8 ack[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = {}; u8 retry; + dret = 0; process_count++; @@ -3468,7 +3465,7 @@ static void register_hpd_handlers(struct amdgpu_device *adev) aconnector = to_amdgpu_dm_connector(connector); dc_link = aconnector->dc_link; - if (DC_IRQ_SOURCE_INVALID != dc_link->irq_source_hpd) { + if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; int_params.irq_source = dc_link->irq_source_hpd; @@ -3477,7 +3474,7 @@ static void register_hpd_handlers(struct amdgpu_device *adev) (void *) aconnector); } - if (DC_IRQ_SOURCE_INVALID != dc_link->irq_source_hpd_rx) { + if (dc_link->irq_source_hpd_rx != DC_IRQ_SOURCE_INVALID) { /* Also register for DP short pulse (hpd_rx). */ int_params.int_context = INTERRUPT_LOW_IRQ_CONTEXT; @@ -3503,7 +3500,7 @@ static int dce60_register_irq_handlers(struct amdgpu_device *adev) struct dc_interrupt_params int_params = {0}; int r; int i; - unsigned client_id = AMDGPU_IRQ_CLIENTID_LEGACY; + unsigned int client_id = AMDGPU_IRQ_CLIENTID_LEGACY; int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT; @@ -3517,11 +3514,12 @@ static int dce60_register_irq_handlers(struct amdgpu_device *adev) * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts * coming from DC hardware. * amdgpu_dm_irq_handler() will re-direct the interrupt to DC - * for acknowledging and handling. */ + * for acknowledging and handling. + */ /* Use VBLANK interrupt */ for (i = 0; i < adev->mode_info.num_crtc; i++) { - r = amdgpu_irq_add_id(adev, client_id, i+1 , &adev->crtc_irq); + r = amdgpu_irq_add_id(adev, client_id, i + 1, &adev->crtc_irq); if (r) { DRM_ERROR("Failed to add crtc irq id!\n"); return r; @@ -3529,7 +3527,7 @@ static int dce60_register_irq_handlers(struct amdgpu_device *adev) int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT; int_params.irq_source = - dc_interrupt_to_irq_source(dc, i+1 , 0); + dc_interrupt_to_irq_source(dc, i + 1, 0); c_irq_params = &adev->dm.vblank_params[int_params.irq_source - DC_IRQ_SOURCE_VBLANK1]; @@ -3585,7 +3583,7 @@ static int dce110_register_irq_handlers(struct amdgpu_device *adev) struct dc_interrupt_params int_params = {0}; int r; int i; - unsigned client_id = AMDGPU_IRQ_CLIENTID_LEGACY; + unsigned int client_id = AMDGPU_IRQ_CLIENTID_LEGACY; if (adev->family >= AMDGPU_FAMILY_AI) client_id = SOC15_IH_CLIENTID_DCE; @@ -3602,7 +3600,8 @@ static int dce110_register_irq_handlers(struct amdgpu_device *adev) * Base driver will call amdgpu_dm_irq_handler() for ALL interrupts * coming from DC hardware. * amdgpu_dm_irq_handler() will re-direct the interrupt to DC - * for acknowledging and handling. */ + * for acknowledging and handling. + */ /* Use VBLANK interrupt */ for (i = VISLANDS30_IV_SRCID_D1_VERTICAL_INTERRUPT0; i <= VISLANDS30_IV_SRCID_D6_VERTICAL_INTERRUPT0; i++) { @@ -4049,7 +4048,7 @@ static void amdgpu_dm_update_backlight_caps(struct amdgpu_display_manager *dm, } static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps, - unsigned *min, unsigned *max) + unsigned int *min, unsigned int *max) { if (!caps) return 0; @@ -4069,7 +4068,7 @@ static int get_brightness_range(const struct amdgpu_dm_backlight_caps *caps, static u32 convert_brightness_from_user(const struct amdgpu_dm_backlight_caps *caps, uint32_t brightness) { - unsigned min, max; + unsigned int min, max; if (!get_brightness_range(caps, &min, &max)) return brightness; @@ -4082,7 +4081,7 @@ static u32 convert_brightness_from_user(const struct amdgpu_dm_backlight_caps *c static u32 convert_brightness_to_user(const struct amdgpu_dm_backlight_caps *caps, uint32_t brightness) { - unsigned min, max; + unsigned int min, max; if (!get_brightness_range(caps, &min, &max)) return brightness; @@ -4562,7 +4561,6 @@ fail: static void amdgpu_dm_destroy_drm_device(struct amdgpu_display_manager *dm) { drm_atomic_private_obj_fini(&dm->atomic_obj); - return; } /****************************************************************************** @@ -5394,6 +5392,7 @@ static bool adjust_colour_depth_from_display_info( { enum dc_color_depth depth = timing_out->display_color_depth; int normalized_clk; + do { normalized_clk = timing_out->pix_clk_100hz / 10; /* YCbCr 4:2:0 requires additional adjustment of 1/2 */ @@ -5609,6 +5608,7 @@ create_fake_sink(struct amdgpu_dm_connector *aconnector) { struct dc_sink_init_data sink_init_data = { 0 }; struct dc_sink *sink = NULL; + sink_init_data.link = aconnector->dc_link; sink_init_data.sink_signal = aconnector->dc_link->connector_signal; @@ -5732,7 +5732,7 @@ get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector, return &aconnector->freesync_vid_base; /* Find the preferred mode */ - list_for_each_entry (m, list_head, head) { + list_for_each_entry(m, list_head, head) { if (m->type & DRM_MODE_TYPE_PREFERRED) { m_pref = m; break; @@ -5756,7 +5756,7 @@ get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector, * For some monitors, preferred mode is not the mode with highest * supported refresh rate. */ - list_for_each_entry (m, list_head, head) { + list_for_each_entry(m, list_head, head) { current_refresh = drm_mode_vrefresh(m); if (m->hdisplay == m_pref->hdisplay && @@ -6028,7 +6028,7 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, * This may not be an error, the use case is when we have no * usermode calls to reset and set mode upon hotplug. In this * case, we call set mode ourselves to restore the previous mode - * and the modelist may not be filled in in time. + * and the modelist may not be filled in time. */ DRM_DEBUG_DRIVER("No preferred mode found\n"); } else { @@ -6051,9 +6051,9 @@ create_stream_for_sink(struct amdgpu_dm_connector *aconnector, drm_mode_set_crtcinfo(&mode, 0); /* - * If scaling is enabled and refresh rate didn't change - * we copy the vic and polarities of the old timings - */ + * If scaling is enabled and refresh rate didn't change + * we copy the vic and polarities of the old timings + */ if (!scale || mode_refresh != preferred_refresh) fill_stream_properties_from_drm_display_mode( stream, &mode, &aconnector->base, con_state, NULL, @@ -6817,6 +6817,7 @@ static int dm_encoder_helper_atomic_check(struct drm_encoder *encoder, if (!state->duplicated) { int max_bpc = conn_state->max_requested_bpc; + is_y420 = drm_mode_is_420_also(&connector->display_info, adjusted_mode) && aconnector->force_yuv420_output; color_depth = convert_color_depth_from_display_info(connector, @@ -7135,7 +7136,7 @@ static bool is_duplicate_mode(struct amdgpu_dm_connector *aconnector, { struct drm_display_mode *m; - list_for_each_entry (m, &aconnector->base.probed_modes, head) { + list_for_each_entry(m, &aconnector->base.probed_modes, head) { if (drm_mode_equal(m, mode)) return true; } @@ -7454,7 +7455,6 @@ static int amdgpu_dm_connector_init(struct amdgpu_display_manager *dm, link->priv = aconnector; - DRM_DEBUG_DRIVER("%s()\n", __func__); i2c = create_i2c(link->ddc, link->link_index, &res); if (!i2c) { @@ -8176,8 +8176,7 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, * DRI3/Present extension with defined target_msc. */ last_flip_vblank = amdgpu_get_vblank_counter_kms(pcrtc); - } - else { + } else { /* For variable refresh rate mode only: * Get vblank of last completed flip to avoid > 1 vrr * flips per video frame by use of throttling, but allow @@ -8510,8 +8509,8 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) dc_resource_state_copy_construct_current(dm->dc, dc_state); } - for_each_oldnew_crtc_in_state (state, crtc, old_crtc_state, - new_crtc_state, i) { + for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, + new_crtc_state, i) { struct amdgpu_crtc *acrtc = to_amdgpu_crtc(crtc); dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); @@ -8534,9 +8533,7 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) dm_old_crtc_state = to_dm_crtc_state(old_crtc_state); drm_dbg_state(state->dev, - "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, " - "planes_changed:%d, mode_changed:%d,active_changed:%d," - "connectors_changed:%d\n", + "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, planes_changed:%d, mode_changed:%d,active_changed:%d,connectors_changed:%d\n", acrtc->crtc_id, new_crtc_state->enable, new_crtc_state->active, @@ -9112,8 +9109,8 @@ static int do_aquire_global_lock(struct drm_device *dev, &commit->flip_done, 10*HZ); if (ret == 0) - DRM_ERROR("[CRTC:%d:%s] hw_done or flip_done " - "timed out\n", crtc->base.id, crtc->name); + DRM_ERROR("[CRTC:%d:%s] hw_done or flip_done timed out\n", + crtc->base.id, crtc->name); drm_crtc_commit_put(commit); } @@ -9198,7 +9195,8 @@ is_timing_unchanged_for_freesync(struct drm_crtc_state *old_crtc_state, return false; } -static void set_freesync_fixed_config(struct dm_crtc_state *dm_new_crtc_state) { +static void set_freesync_fixed_config(struct dm_crtc_state *dm_new_crtc_state) +{ u64 num, den, res; struct drm_crtc_state *new_crtc_state = &dm_new_crtc_state->base; @@ -9320,9 +9318,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, goto skip_modeset; drm_dbg_state(state->dev, - "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, " - "planes_changed:%d, mode_changed:%d,active_changed:%d," - "connectors_changed:%d\n", + "amdgpu_crtc id:%d crtc_state_flags: enable:%d, active:%d, planes_changed:%d, mode_changed:%d,active_changed:%d,connectors_changed:%d\n", acrtc->crtc_id, new_crtc_state->enable, new_crtc_state->active, @@ -9351,8 +9347,7 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, old_crtc_state)) { new_crtc_state->mode_changed = false; DRM_DEBUG_DRIVER( - "Mode change not required for front porch change, " - "setting mode_changed to %d", + "Mode change not required for front porch change, setting mode_changed to %d", new_crtc_state->mode_changed); set_freesync_fixed_config(dm_new_crtc_state); @@ -9364,9 +9359,8 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, struct drm_display_mode *high_mode; high_mode = get_highest_refresh_rate_mode(aconnector, false); - if (!drm_mode_equal(&new_crtc_state->mode, high_mode)) { + if (!drm_mode_equal(&new_crtc_state->mode, high_mode)) set_freesync_fixed_config(dm_new_crtc_state); - } } ret = dm_atomic_get_state(state, &dm_state); @@ -9534,6 +9528,7 @@ static bool should_reset_plane(struct drm_atomic_state *state, */ for_each_oldnew_plane_in_state(state, other, old_other_state, new_other_state, i) { struct amdgpu_framebuffer *old_afb, *new_afb; + if (other->type == DRM_PLANE_TYPE_CURSOR) continue; @@ -9632,11 +9627,12 @@ static int dm_check_cursor_fb(struct amdgpu_crtc *new_acrtc, } /* Core DRM takes care of checking FB modifiers, so we only need to - * check tiling flags when the FB doesn't have a modifier. */ + * check tiling flags when the FB doesn't have a modifier. + */ if (!(fb->flags & DRM_MODE_FB_MODIFIERS)) { if (adev->family < AMDGPU_FAMILY_AI) { linear = AMDGPU_TILING_GET(afb->tiling_flags, ARRAY_MODE) != DC_ARRAY_2D_TILED_THIN1 && - AMDGPU_TILING_GET(afb->tiling_flags, ARRAY_MODE) != DC_ARRAY_1D_TILED_THIN1 && + AMDGPU_TILING_GET(afb->tiling_flags, ARRAY_MODE) != DC_ARRAY_1D_TILED_THIN1 && AMDGPU_TILING_GET(afb->tiling_flags, MICRO_TILE_MODE) == 0; } else { linear = AMDGPU_TILING_GET(afb->tiling_flags, SWIZZLE_MODE) == 0; @@ -9858,12 +9854,12 @@ static int dm_check_crtc_cursor(struct drm_atomic_state *state, /* On DCE and DCN there is no dedicated hardware cursor plane. We get a * cursor per pipe but it's going to inherit the scaling and * positioning from the underlying pipe. Check the cursor plane's - * blending properties match the underlying planes'. */ + * blending properties match the underlying planes'. + */ new_cursor_state = drm_atomic_get_new_plane_state(state, cursor); - if (!new_cursor_state || !new_cursor_state->fb) { + if (!new_cursor_state || !new_cursor_state->fb) return 0; - } dm_get_oriented_plane_size(new_cursor_state, &cursor_src_w, &cursor_src_h); cursor_scale_w = new_cursor_state->crtc_w * 1000 / cursor_src_w; @@ -9908,6 +9904,7 @@ static int add_affected_mst_dsc_crtcs(struct drm_atomic_state *state, struct drm struct drm_connector_state *conn_state, *old_conn_state; struct amdgpu_dm_connector *aconnector = NULL; int i; + for_each_oldnew_connector_in_state(state, connector, old_conn_state, conn_state, i) { if (!conn_state->crtc) conn_state = old_conn_state; @@ -10342,7 +10339,7 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, } /* Store the overall update type for use later in atomic check. */ - for_each_new_crtc_in_state (state, crtc, new_crtc_state, i) { + for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) { struct dm_crtc_state *dm_new_crtc_state = to_dm_crtc_state(new_crtc_state); @@ -10364,7 +10361,7 @@ fail: else if (ret == -EINTR || ret == -EAGAIN || ret == -ERESTARTSYS) DRM_DEBUG_DRIVER("Atomic check stopped due to signal.\n"); else - DRM_DEBUG_DRIVER("Atomic check failed with err: %d \n", ret); + DRM_DEBUG_DRIVER("Atomic check failed with err: %d\n", ret); trace_amdgpu_dm_atomic_check_finish(state, ret); -- cgit v1.2.3 From 4f6d9e38c4d244ad106eb9ebd8c0e1215e866f35 Mon Sep 17 00:00:00 2001 From: Wayne Lin Date: Wed, 9 Mar 2022 17:05:05 +0800 Subject: drm/amd/display: Add polling method to handle MST reply packet [Why] Specific TBT4 dock doesn't send out short HPD to notify source that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec and cause source can't send out streams to mst sinks. [How] To cover this misbehavior, add an additional polling method to detect DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept. Just hook up our handler to drm mgr->cbs->poll_hpd_irq(). Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Jerry Zuo Acked-by: Alan Liu Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 117 ++++++--------------- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h | 7 ++ .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 110 +++++++++++++++++++ .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.h | 11 ++ 4 files changed, 159 insertions(+), 86 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 948d61845efd..0fa739fd6a9c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1347,6 +1347,15 @@ static void dm_handle_hpd_rx_offload_work(struct work_struct *work) if (amdgpu_in_reset(adev)) goto skip; + if (offload_work->data.bytes.device_service_irq.bits.UP_REQ_MSG_RDY || + offload_work->data.bytes.device_service_irq.bits.DOWN_REP_MSG_RDY) { + dm_handle_mst_sideband_msg_ready_event(&aconnector->mst_mgr, DOWN_OR_UP_MSG_RDY_EVENT); + spin_lock_irqsave(&offload_work->offload_wq->offload_lock, flags); + offload_work->offload_wq->is_handling_mst_msg_rdy_event = false; + spin_unlock_irqrestore(&offload_work->offload_wq->offload_lock, flags); + goto skip; + } + mutex_lock(&adev->dm.dc_lock); if (offload_work->data.bytes.device_service_irq.bits.AUTOMATED_TEST) { dc_link_dp_handle_automated_test(dc_link); @@ -3232,87 +3241,6 @@ static void handle_hpd_irq(void *param) } -static void dm_handle_mst_sideband_msg(struct amdgpu_dm_connector *aconnector) -{ - u8 esi[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = { 0 }; - u8 dret; - bool new_irq_handled = false; - int dpcd_addr; - int dpcd_bytes_to_read; - - const int max_process_count = 30; - int process_count = 0; - - const struct dc_link_status *link_status = dc_link_get_status(aconnector->dc_link); - - if (link_status->dpcd_caps->dpcd_rev.raw < 0x12) { - dpcd_bytes_to_read = DP_LANE0_1_STATUS - DP_SINK_COUNT; - /* DPCD 0x200 - 0x201 for downstream IRQ */ - dpcd_addr = DP_SINK_COUNT; - } else { - dpcd_bytes_to_read = DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI; - /* DPCD 0x2002 - 0x2005 for downstream IRQ */ - dpcd_addr = DP_SINK_COUNT_ESI; - } - - dret = drm_dp_dpcd_read( - &aconnector->dm_dp_aux.aux, - dpcd_addr, - esi, - dpcd_bytes_to_read); - - while (dret == dpcd_bytes_to_read && - process_count < max_process_count) { - u8 ack[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = {}; - u8 retry; - - dret = 0; - - process_count++; - - DRM_DEBUG_DRIVER("ESI %02x %02x %02x\n", esi[0], esi[1], esi[2]); - /* handle HPD short pulse irq */ - if (aconnector->mst_mgr.mst_state) - drm_dp_mst_hpd_irq_handle_event(&aconnector->mst_mgr, - esi, - ack, - &new_irq_handled); - - if (new_irq_handled) { - /* ACK at DPCD to notify down stream */ - for (retry = 0; retry < 3; retry++) { - ssize_t wret; - - wret = drm_dp_dpcd_writeb(&aconnector->dm_dp_aux.aux, - dpcd_addr + 1, - ack[1]); - if (wret == 1) - break; - } - - if (retry == 3) { - DRM_ERROR("Failed to ack MST event.\n"); - return; - } - - drm_dp_mst_hpd_irq_send_new_request(&aconnector->mst_mgr); - /* check if there is new irq to be handled */ - dret = drm_dp_dpcd_read( - &aconnector->dm_dp_aux.aux, - dpcd_addr, - esi, - dpcd_bytes_to_read); - - new_irq_handled = false; - } else { - break; - } - } - - if (process_count == max_process_count) - DRM_DEBUG_DRIVER("Loop exceeded max iterations\n"); -} - static void schedule_hpd_rx_offload_work(struct hpd_rx_irq_offload_work_queue *offload_wq, union hpd_irq_data hpd_irq_data) { @@ -3374,7 +3302,23 @@ static void handle_hpd_rx_irq(void *param) if (dc_link_dp_allow_hpd_rx_irq(dc_link)) { if (hpd_irq_data.bytes.device_service_irq.bits.UP_REQ_MSG_RDY || hpd_irq_data.bytes.device_service_irq.bits.DOWN_REP_MSG_RDY) { - dm_handle_mst_sideband_msg(aconnector); + bool skip = false; + + /* + * DOWN_REP_MSG_RDY is also handled by polling method + * mgr->cbs->poll_hpd_irq() + */ + spin_lock(&offload_wq->offload_lock); + skip = offload_wq->is_handling_mst_msg_rdy_event; + + if (!skip) + offload_wq->is_handling_mst_msg_rdy_event = true; + + spin_unlock(&offload_wq->offload_lock); + + if (!skip) + schedule_hpd_rx_offload_work(offload_wq, hpd_irq_data); + goto out; } @@ -3483,11 +3427,11 @@ static void register_hpd_handlers(struct amdgpu_device *adev) amdgpu_dm_irq_register_interrupt(adev, &int_params, handle_hpd_rx_irq, (void *) aconnector); - - if (adev->dm.hpd_rx_offload_wq) - adev->dm.hpd_rx_offload_wq[dc_link->link_index].aconnector = - aconnector; } + + if (adev->dm.hpd_rx_offload_wq) + adev->dm.hpd_rx_offload_wq[connector->index].aconnector = + aconnector; } } @@ -7296,6 +7240,7 @@ void amdgpu_dm_connector_init_helper(struct amdgpu_display_manager *dm, aconnector->as_type = ADAPTIVE_SYNC_TYPE_NONE; memset(&aconnector->vsdb_info, 0, sizeof(aconnector->vsdb_info)); mutex_init(&aconnector->hpd_lock); + mutex_init(&aconnector->handle_mst_msg_ready); /* * configure support HPD hot plug connector_>polled default value is 0 diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h index 4561f55afa99..9fb5bb3a75a7 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h @@ -194,6 +194,11 @@ struct hpd_rx_irq_offload_work_queue { * we're handling link loss */ bool is_handling_link_loss; + /** + * @is_handling_mst_msg_rdy_event: Used to prevent inserting mst message + * ready event when we're already handling mst message ready event + */ + bool is_handling_mst_msg_rdy_event; /** * @aconnector: The aconnector that this work queue is attached to */ @@ -638,6 +643,8 @@ struct amdgpu_dm_connector { struct drm_dp_mst_port *mst_output_port; struct amdgpu_dm_connector *mst_root; struct drm_dp_aux *dsc_aux; + struct mutex handle_mst_msg_ready; + /* TODO see if we can merge with ddc_bus or make a dm_connector */ struct amdgpu_i2c_adapter *i2c; diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 46d0a8f57e55..888e80f498e9 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -619,8 +619,118 @@ dm_dp_add_mst_connector(struct drm_dp_mst_topology_mgr *mgr, return connector; } +void dm_handle_mst_sideband_msg_ready_event( + struct drm_dp_mst_topology_mgr *mgr, + enum mst_msg_ready_type msg_rdy_type) +{ + uint8_t esi[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = { 0 }; + uint8_t dret; + bool new_irq_handled = false; + int dpcd_addr; + uint8_t dpcd_bytes_to_read; + const uint8_t max_process_count = 30; + uint8_t process_count = 0; + u8 retry; + struct amdgpu_dm_connector *aconnector = + container_of(mgr, struct amdgpu_dm_connector, mst_mgr); + + + const struct dc_link_status *link_status = dc_link_get_status(aconnector->dc_link); + + if (link_status->dpcd_caps->dpcd_rev.raw < 0x12) { + dpcd_bytes_to_read = DP_LANE0_1_STATUS - DP_SINK_COUNT; + /* DPCD 0x200 - 0x201 for downstream IRQ */ + dpcd_addr = DP_SINK_COUNT; + } else { + dpcd_bytes_to_read = DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI; + /* DPCD 0x2002 - 0x2005 for downstream IRQ */ + dpcd_addr = DP_SINK_COUNT_ESI; + } + + mutex_lock(&aconnector->handle_mst_msg_ready); + + while (process_count < max_process_count) { + u8 ack[DP_PSR_ERROR_STATUS - DP_SINK_COUNT_ESI] = {}; + + process_count++; + + dret = drm_dp_dpcd_read( + &aconnector->dm_dp_aux.aux, + dpcd_addr, + esi, + dpcd_bytes_to_read); + + if (dret != dpcd_bytes_to_read) { + DRM_DEBUG_KMS("DPCD read and acked number is not as expected!"); + break; + } + + DRM_DEBUG_DRIVER("ESI %02x %02x %02x\n", esi[0], esi[1], esi[2]); + + switch (msg_rdy_type) { + case DOWN_REP_MSG_RDY_EVENT: + /* Only handle DOWN_REP_MSG_RDY case*/ + esi[1] &= DP_DOWN_REP_MSG_RDY; + break; + case UP_REQ_MSG_RDY_EVENT: + /* Only handle UP_REQ_MSG_RDY case*/ + esi[1] &= DP_UP_REQ_MSG_RDY; + break; + default: + /* Handle both cases*/ + esi[1] &= (DP_DOWN_REP_MSG_RDY | DP_UP_REQ_MSG_RDY); + break; + } + + if (!esi[1]) + break; + + /* handle MST irq */ + if (aconnector->mst_mgr.mst_state) + drm_dp_mst_hpd_irq_handle_event(&aconnector->mst_mgr, + esi, + ack, + &new_irq_handled); + + if (new_irq_handled) { + /* ACK at DPCD to notify down stream */ + for (retry = 0; retry < 3; retry++) { + ssize_t wret; + + wret = drm_dp_dpcd_writeb(&aconnector->dm_dp_aux.aux, + dpcd_addr + 1, + ack[1]); + if (wret == 1) + break; + } + + if (retry == 3) { + DRM_ERROR("Failed to ack MST event.\n"); + return; + } + + drm_dp_mst_hpd_irq_send_new_request(&aconnector->mst_mgr); + + new_irq_handled = false; + } else { + break; + } + } + + mutex_unlock(&aconnector->handle_mst_msg_ready); + + if (process_count == max_process_count) + DRM_DEBUG_DRIVER("Loop exceeded max iterations\n"); +} + +static void dm_handle_mst_down_rep_msg_ready(struct drm_dp_mst_topology_mgr *mgr) +{ + dm_handle_mst_sideband_msg_ready_event(mgr, DOWN_REP_MSG_RDY_EVENT); +} + static const struct drm_dp_mst_topology_cbs dm_mst_cbs = { .add_connector = dm_dp_add_mst_connector, + .poll_hpd_irq = dm_handle_mst_down_rep_msg_ready, }; void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h index 1e4ede1e57ab..37c820ab0fdb 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.h @@ -49,6 +49,13 @@ #define PBN_FEC_OVERHEAD_MULTIPLIER_8B_10B 1031 #define PBN_FEC_OVERHEAD_MULTIPLIER_128B_132B 1000 +enum mst_msg_ready_type { + NONE_MSG_RDY_EVENT = 0, + DOWN_REP_MSG_RDY_EVENT = 1, + UP_REQ_MSG_RDY_EVENT = 2, + DOWN_OR_UP_MSG_RDY_EVENT = 3 +}; + struct amdgpu_display_manager; struct amdgpu_dm_connector; @@ -61,6 +68,10 @@ void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm, void dm_dp_create_fake_mst_encoders(struct amdgpu_device *adev); +void dm_handle_mst_sideband_msg_ready_event( + struct drm_dp_mst_topology_mgr *mgr, + enum mst_msg_ready_type msg_rdy_type); + struct dsc_mst_fairness_vars { int pbn; bool dsc_enabled; -- cgit v1.2.3 From 5a25cefc0920088bb9afafeb80ad3dcd84fe278b Mon Sep 17 00:00:00 2001 From: Taimur Hassan Date: Tue, 20 Jun 2023 17:00:28 -0400 Subject: drm/amd/display: check TG is non-null before checking if enabled [Why & How] If there is no TG allocation we can dereference a NULL pointer when checking if the TG is enabled. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Alan Liu Signed-off-by: Taimur Hassan Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index a50309039d08..9834b75f1837 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -3278,7 +3278,8 @@ void dcn10_wait_for_mpcc_disconnect( if (pipe_ctx->stream_res.opp->mpcc_disconnect_pending[mpcc_inst]) { struct hubp *hubp = get_hubp_by_inst(res_pool, mpcc_inst); - if (pipe_ctx->stream_res.tg->funcs->is_tg_enabled(pipe_ctx->stream_res.tg)) + if (pipe_ctx->stream_res.tg && + pipe_ctx->stream_res.tg->funcs->is_tg_enabled(pipe_ctx->stream_res.tg)) res_pool->mpc->funcs->wait_for_idle(res_pool->mpc, mpcc_inst); pipe_ctx->stream_res.opp->mpcc_disconnect_pending[mpcc_inst] = false; hubp->funcs->set_blank(hubp, true); -- cgit v1.2.3 From a460beefe77d780ac48f19d39333852a7f93ffc1 Mon Sep 17 00:00:00 2001 From: Zhikai Zhai Date: Fri, 30 Jun 2023 11:35:14 +0800 Subject: drm/amd/display: Disable MPC split by default on special asic [WHY] All of pipes will be used when the MPC split enable on the dcn which just has 2 pipes. Then MPO enter will trigger the minimal transition which need programe dcn from 2 pipes MPC split to 2 pipes MPO. This action will cause lag if happen frequently. [HOW] Disable the MPC split for the platform which dcn resource is limited Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee Acked-by: Alan Liu Signed-off-by: Zhikai Zhai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c index 45956ef6f3f9..131b8b82afc0 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c @@ -65,7 +65,7 @@ static const struct dc_debug_options debug_defaults_drv = { .timing_trace = false, .clock_trace = true, .disable_pplib_clock_request = true, - .pipe_split_policy = MPC_SPLIT_DYNAMIC, + .pipe_split_policy = MPC_SPLIT_AVOID, .force_single_disp_pipe_split = false, .disable_dcc = DCC_ENABLE, .vsr_support = true, -- cgit v1.2.3 From 2a9482e55968ed7368afaa9c2133404069117320 Mon Sep 17 00:00:00 2001 From: Daniel Miess Date: Thu, 22 Jun 2023 08:11:48 -0400 Subject: drm/amd/display: Prevent vtotal from being set to 0 [Why] In dcn314 DML the destination pipe vtotal was being set to the crtc adjustment vtotal_min value even in cases where that value is 0. [How] Only set vtotal to the crtc adjustment vtotal_min value in cases where the value is non-zero. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Alan Liu Signed-off-by: Daniel Miess Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c index d9e049e7ff0a..ed8ddb75b333 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn314/dcn314_fpu.c @@ -295,7 +295,11 @@ int dcn314_populate_dml_pipes_from_context_fpu(struct dc *dc, struct dc_state *c pipe = &res_ctx->pipe_ctx[i]; timing = &pipe->stream->timing; - pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min; + if (pipe->stream->adjust.v_total_min != 0) + pipes[pipe_cnt].pipe.dest.vtotal = pipe->stream->adjust.v_total_min; + else + pipes[pipe_cnt].pipe.dest.vtotal = timing->v_total; + pipes[pipe_cnt].pipe.dest.vblank_nom = timing->v_total - pipes[pipe_cnt].pipe.dest.vactive; pipes[pipe_cnt].pipe.dest.vblank_nom = min(pipes[pipe_cnt].pipe.dest.vblank_nom, dcn3_14_ip.VBlankNomDefaultUS); pipes[pipe_cnt].pipe.dest.vblank_nom = max(pipes[pipe_cnt].pipe.dest.vblank_nom, timing->v_sync_width); -- cgit v1.2.3 From 2387ccf43e3c6cb5dbd757c5ef410cca9f14b971 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Thu, 29 Jun 2023 10:35:59 -0400 Subject: drm/amd/display: Keep PHY active for DP displays on DCN31 [Why & How] Port of a change that went into DCN314 to keep the PHY enabled when we have a connected and active DP display. The PHY can hang if PHY refclk is disabled inadvertently. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic Acked-by: Alan Liu Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c index 7ccd96959256..3db4ef564b99 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_clk_mgr.c @@ -87,6 +87,11 @@ static int dcn31_get_active_display_cnt_wa( stream->signal == SIGNAL_TYPE_DVI_SINGLE_LINK || stream->signal == SIGNAL_TYPE_DVI_DUAL_LINK) tmds_present = true; + + /* Checking stream / link detection ensuring that PHY is active*/ + if (dc_is_dp_signal(stream->signal) && !stream->dpms_off) + display_count++; + } for (i = 0; i < dc->link_count; i++) { -- cgit v1.2.3 From dcaa32e1f58473b9f4ac566fadd326956be83138 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Mon, 17 Jul 2023 09:55:07 +0800 Subject: drm/amdgpu: Allocate root PD on correct partition file_priv needs to be setup firstly, otherwise, root PD will always be allocated on partition 0, even if opening the device from other partitions. Fixes: 3ebfd221c1a8 ("drm/amdkfd: Store xcp partition id to amdgpu bo") Signed-off-by: Guchun Chen Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index cca5a495611f..61d5472d60a6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -1229,13 +1229,13 @@ int amdgpu_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) pasid = 0; } - r = amdgpu_vm_init(adev, &fpriv->vm); + r = amdgpu_xcp_open_device(adev, fpriv, file_priv); if (r) goto error_pasid; - r = amdgpu_xcp_open_device(adev, fpriv, file_priv); + r = amdgpu_vm_init(adev, &fpriv->vm); if (r) - goto error_vm; + goto error_pasid; r = amdgpu_vm_set_pasid(adev, &fpriv->vm, pasid); if (r) -- cgit v1.2.3 From 8ecee4cbc72b53551c1d33251a48c912d70282ea Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Thu, 13 Jul 2023 15:09:37 +0800 Subject: drm/amdgpu: fix slab-out-of-bounds issue in amdgpu_vm_pt_create MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recent code set xcp_id stored from file private data when opening device to amdgpu bo for accounting memory usage etc, but not all VMs are attached to this fpriv structure like the vm cases in amdgpu_mes_self_test, otherwise, KASAN will complain below out of bound access. And more importantly, VM code should not touch fpriv structure, so drop fpriv code handling from amdgpu_vm_pt. [ 77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu] [ 77.293845] Read of size 4 at addr ffff888102c48a48 by task modprobe/1069 [ 77.294146] Call Trace: [ 77.294178] [ 77.294208] dump_stack_lvl+0x49/0x63 [ 77.294260] print_report+0x16f/0x4a6 [ 77.294307] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu] [ 77.295979] ? kasan_complete_mode_report_info+0x3c/0x200 [ 77.296057] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu] [ 77.297556] kasan_report+0xb4/0x130 [ 77.297609] ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu] [ 77.299202] __asan_load4+0x6f/0x90 [ 77.299272] amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu] [ 77.300796] ? amdgpu_init+0x6e/0x1000 [amdgpu] [ 77.302222] ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu] [ 77.303721] ? preempt_count_sub+0x18/0xc0 [ 77.303786] amdgpu_vm_init+0x39e/0x870 [amdgpu] [ 77.305186] ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu] [ 77.306683] ? kasan_set_track+0x25/0x30 [ 77.306737] ? kasan_save_alloc_info+0x1b/0x30 [ 77.306795] ? __kasan_kmalloc+0x87/0xa0 [ 77.306852] amdgpu_mes_self_test+0x169/0x620 [amdgpu] v2: without specifying xcp partition for PD/PT bo, the xcp id is -1. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686 Fixes: 3ebfd221c1a8 ("drm/amdkfd: Store xcp partition id to amdgpu bo") Signed-off-by: Guchun Chen Tested-by: Mikhail Gavrilov Reviewed-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 5 +++-- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h | 5 +++-- drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c | 11 ++++++----- 5 files changed, 14 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 61d5472d60a6..12414a713256 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -1233,7 +1233,7 @@ int amdgpu_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) if (r) goto error_pasid; - r = amdgpu_vm_init(adev, &fpriv->vm); + r = amdgpu_vm_init(adev, &fpriv->vm, fpriv->xcp_id); if (r) goto error_pasid; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c index e9091ebfe230..f808841310fd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c @@ -1382,7 +1382,7 @@ int amdgpu_mes_self_test(struct amdgpu_device *adev) goto error_pasid; } - r = amdgpu_vm_init(adev, vm); + r = amdgpu_vm_init(adev, vm, -1); if (r) { DRM_ERROR("failed to initialize vm\n"); goto error_pasid; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 291977b93b1d..ec1ec08d4058 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2121,13 +2121,14 @@ long amdgpu_vm_wait_idle(struct amdgpu_vm *vm, long timeout) * * @adev: amdgpu_device pointer * @vm: requested vm + * @xcp_id: GPU partition selection id * * Init @vm fields. * * Returns: * 0 for success, error for failure. */ -int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) +int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm, int32_t xcp_id) { struct amdgpu_bo *root_bo; struct amdgpu_bo_vm *root; @@ -2177,7 +2178,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) vm->evicting = false; r = amdgpu_vm_pt_create(adev, vm, adev->vm_manager.root_level, - false, &root); + false, &root, xcp_id); if (r) goto error_free_delayed; root_bo = &root->bo; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h index 9c85d494f2a2..ffac7413c657 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.h @@ -392,7 +392,7 @@ int amdgpu_vm_set_pasid(struct amdgpu_device *adev, struct amdgpu_vm *vm, u32 pasid); long amdgpu_vm_wait_idle(struct amdgpu_vm *vm, long timeout); -int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm); +int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm, int32_t xcp_id); int amdgpu_vm_make_compute(struct amdgpu_device *adev, struct amdgpu_vm *vm); void amdgpu_vm_release_compute(struct amdgpu_device *adev, struct amdgpu_vm *vm); void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm); @@ -475,7 +475,8 @@ void amdgpu_vm_get_memory(struct amdgpu_vm *vm, int amdgpu_vm_pt_clear(struct amdgpu_device *adev, struct amdgpu_vm *vm, struct amdgpu_bo_vm *vmbo, bool immediate); int amdgpu_vm_pt_create(struct amdgpu_device *adev, struct amdgpu_vm *vm, - int level, bool immediate, struct amdgpu_bo_vm **vmbo); + int level, bool immediate, struct amdgpu_bo_vm **vmbo, + int32_t xcp_id); void amdgpu_vm_pt_free_root(struct amdgpu_device *adev, struct amdgpu_vm *vm); bool amdgpu_vm_pt_is_root_clean(struct amdgpu_device *adev, struct amdgpu_vm *vm); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c index dea1a64be44d..6949d777fd98 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c @@ -498,11 +498,12 @@ exit: * @level: the page table level * @immediate: use a immediate update * @vmbo: pointer to the buffer object pointer + * @xcp_id: GPU partition id */ int amdgpu_vm_pt_create(struct amdgpu_device *adev, struct amdgpu_vm *vm, - int level, bool immediate, struct amdgpu_bo_vm **vmbo) + int level, bool immediate, struct amdgpu_bo_vm **vmbo, + int32_t xcp_id) { - struct amdgpu_fpriv *fpriv = container_of(vm, struct amdgpu_fpriv, vm); struct amdgpu_bo_param bp; struct amdgpu_bo *bo; struct dma_resv *resv; @@ -535,7 +536,7 @@ int amdgpu_vm_pt_create(struct amdgpu_device *adev, struct amdgpu_vm *vm, bp.type = ttm_bo_type_kernel; bp.no_wait_gpu = immediate; - bp.xcp_id_plus1 = fpriv->xcp_id == ~0 ? 0 : fpriv->xcp_id + 1; + bp.xcp_id_plus1 = xcp_id + 1; if (vm->root.bo) bp.resv = vm->root.bo->tbo.base.resv; @@ -561,7 +562,7 @@ int amdgpu_vm_pt_create(struct amdgpu_device *adev, struct amdgpu_vm *vm, bp.type = ttm_bo_type_kernel; bp.resv = bo->tbo.base.resv; bp.bo_ptr_size = sizeof(struct amdgpu_bo); - bp.xcp_id_plus1 = fpriv->xcp_id == ~0 ? 0 : fpriv->xcp_id + 1; + bp.xcp_id_plus1 = xcp_id + 1; r = amdgpu_bo_create(adev, &bp, &(*vmbo)->shadow); @@ -606,7 +607,7 @@ static int amdgpu_vm_pt_alloc(struct amdgpu_device *adev, return 0; amdgpu_vm_eviction_unlock(vm); - r = amdgpu_vm_pt_create(adev, vm, cursor->level, immediate, &pt); + r = amdgpu_vm_pt_create(adev, vm, cursor->level, immediate, &pt, 0); amdgpu_vm_eviction_lock(vm); if (r) return r; -- cgit v1.2.3 From 8e78127143086bd89aa099740c1767d64fe80631 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Thu, 13 Jul 2023 15:55:58 +0800 Subject: drm/amdgpu/vm: use the same xcp_id from root PD MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Other PDs/PTs allocation should just use the same xcp_id as that stored in root PD. Suggested-by: Christian König Signed-off-by: Guchun Chen Reviewed-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c index 6949d777fd98..5431332bbdb8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm_pt.c @@ -607,7 +607,8 @@ static int amdgpu_vm_pt_alloc(struct amdgpu_device *adev, return 0; amdgpu_vm_eviction_unlock(vm); - r = amdgpu_vm_pt_create(adev, vm, cursor->level, immediate, &pt, 0); + r = amdgpu_vm_pt_create(adev, vm, cursor->level, immediate, &pt, + vm->root.bo->xcp_id); amdgpu_vm_eviction_lock(vm); if (r) return r; -- cgit v1.2.3 From b13d3e9c6b62597a5c31fdc74febb3bc588893bf Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Fri, 14 Jul 2023 19:38:16 +0800 Subject: drm/amdgpu: use a macro to define no xcp partition case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ~0 as no xcp partition is used in several places, so improve its definition by a macro for code consistency. Suggested-by: Christian König Signed-off-by: Guchun Chen Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 3 ++- drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c | 4 ++-- drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.h | 2 ++ drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c | 4 ++-- 4 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index a7f314ddd173..d34c3ef8f3ed 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -1709,7 +1709,8 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu( alloc_flags |= (flags & KFD_IOC_ALLOC_MEM_FLAGS_PUBLIC) ? AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED : 0; } - xcp_id = fpriv->xcp_id == ~0 ? 0 : fpriv->xcp_id; + xcp_id = fpriv->xcp_id == AMDGPU_XCP_NO_PARTITION ? + 0 : fpriv->xcp_id; } else if (flags & KFD_IOC_ALLOC_MEM_FLAGS_GTT) { domain = alloc_domain = AMDGPU_GEM_DOMAIN_GTT; alloc_flags = 0; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c index d175e862f222..9c9cca129498 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.c @@ -363,7 +363,7 @@ int amdgpu_xcp_open_device(struct amdgpu_device *adev, if (!adev->xcp_mgr) return 0; - fpriv->xcp_id = ~0; + fpriv->xcp_id = AMDGPU_XCP_NO_PARTITION; for (i = 0; i < MAX_XCP; ++i) { if (!adev->xcp_mgr->xcp[i].ddev) break; @@ -381,7 +381,7 @@ int amdgpu_xcp_open_device(struct amdgpu_device *adev, } } - fpriv->vm.mem_id = fpriv->xcp_id == ~0 ? -1 : + fpriv->vm.mem_id = fpriv->xcp_id == AMDGPU_XCP_NO_PARTITION ? -1 : adev->xcp_mgr->xcp[fpriv->xcp_id].mem_id; return 0; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.h index 0f8026d64ea5..9a1036aeec2a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xcp.h @@ -37,6 +37,8 @@ #define AMDGPU_XCP_FL_NONE 0 #define AMDGPU_XCP_FL_LOCKED (1 << 0) +#define AMDGPU_XCP_NO_PARTITION (~0) + struct amdgpu_fpriv; enum AMDGPU_XCP_IP_BLOCK { diff --git a/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c b/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c index 16471b81a1f5..72b629a78c62 100644 --- a/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c +++ b/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram_reg_init.c @@ -68,7 +68,7 @@ static void aqua_vanjaram_set_xcp_id(struct amdgpu_device *adev, enum AMDGPU_XCP_IP_BLOCK ip_blk; uint32_t inst_mask; - ring->xcp_id = ~0; + ring->xcp_id = AMDGPU_XCP_NO_PARTITION; if (adev->xcp_mgr->mode == AMDGPU_XCP_MODE_NONE) return; @@ -177,7 +177,7 @@ static int aqua_vanjaram_select_scheds( u32 sel_xcp_id; int i; - if (fpriv->xcp_id == ~0) { + if (fpriv->xcp_id == AMDGPU_XCP_NO_PARTITION) { u32 least_ref_cnt = ~0; fpriv->xcp_id = 0; -- cgit v1.2.3 From 78adb4bcf99effbb960c5f9091e2e062509d1030 Mon Sep 17 00:00:00 2001 From: Florian Kauer Date: Mon, 17 Jul 2023 10:54:44 -0700 Subject: igc: Prevent garbled TX queue with XDP ZEROCOPY In normal operation, each populated queue item has next_to_watch pointing to the last TX desc of the packet, while each cleaned item has it set to 0. In particular, next_to_use that points to the next (necessarily clean) item to use has next_to_watch set to 0. When the TX queue is used both by an application using AF_XDP with ZEROCOPY as well as a second non-XDP application generating high traffic, the queue pointers can get in an invalid state where next_to_use points to an item where next_to_watch is NOT set to 0. However, the implementation assumes at several places that this is never the case, so if it does hold, bad things happen. In particular, within the loop inside of igc_clean_tx_irq(), next_to_clean can overtake next_to_use. Finally, this prevents any further transmission via this queue and it never gets unblocked or signaled. Secondly, if the queue is in this garbled state, the inner loop of igc_clean_tx_ring() will never terminate, completely hogging a CPU core. The reason is that igc_xdp_xmit_zc() reads next_to_use before acquiring the lock, and writing it back (potentially unmodified) later. If it got modified before locking, the outdated next_to_use is written pointing to an item that was already used elsewhere (and thus next_to_watch got written). Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Florian Kauer Reviewed-by: Kurt Kanzenbach Tested-by: Kurt Kanzenbach Acked-by: Vinicius Costa Gomes Reviewed-by: Simon Horman Tested-by: Naama Meir Signed-off-by: Tony Nguyen Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/igc/igc_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 9f93f0f4f752..f36bc2a1849a 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -2828,9 +2828,8 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring) struct netdev_queue *nq = txring_txq(ring); union igc_adv_tx_desc *tx_desc = NULL; int cpu = smp_processor_id(); - u16 ntu = ring->next_to_use; struct xdp_desc xdp_desc; - u16 budget; + u16 budget, ntu; if (!netif_carrier_ok(ring->netdev)) return; @@ -2840,6 +2839,7 @@ static void igc_xdp_xmit_zc(struct igc_ring *ring) /* Avoid transmit queue timeout since we share it with the slow path */ txq_trans_cond_update(nq); + ntu = ring->next_to_use; budget = igc_desc_unused(ring); while (xsk_tx_peek_desc(pool, &xdp_desc) && budget--) { -- cgit v1.2.3 From e7002b3b20c58bce4a88c15aca8e6cc894e3a7ed Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Mon, 17 Jul 2023 11:46:43 +0530 Subject: octeontx2-pf: mcs: Generate hash key using ecb(aes) Hardware generated encryption and ICV tags are found to be wrong when tested with IEEE MACSEC test vectors. This is because as per the HRM, the hash key (derived by AES-ECB block encryption of an all 0s block with the SAK) has to be programmed by the software in MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register. Hence fix this by generating hash key in software and configuring in hardware. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep Reviewed-by: Kalesh AP Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski --- .../ethernet/marvell/octeontx2/nic/cn10k_macsec.c | 137 +++++++++++++++------ 1 file changed, 100 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c index 6e2fb24be8c1..59b138214af2 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k_macsec.c @@ -4,6 +4,7 @@ * Copyright (C) 2022 Marvell. */ +#include #include #include #include "otx2_common.h" @@ -42,6 +43,56 @@ #define MCS_TCI_E 0x08 /* encryption */ #define MCS_TCI_C 0x04 /* changed text */ +#define CN10K_MAX_HASH_LEN 16 +#define CN10K_MAX_SAK_LEN 32 + +static int cn10k_ecb_aes_encrypt(struct otx2_nic *pfvf, u8 *sak, + u16 sak_len, u8 *hash) +{ + u8 data[CN10K_MAX_HASH_LEN] = { 0 }; + struct skcipher_request *req = NULL; + struct scatterlist sg_src, sg_dst; + struct crypto_skcipher *tfm; + DECLARE_CRYPTO_WAIT(wait); + int err; + + tfm = crypto_alloc_skcipher("ecb(aes)", 0, 0); + if (IS_ERR(tfm)) { + dev_err(pfvf->dev, "failed to allocate transform for ecb-aes\n"); + return PTR_ERR(tfm); + } + + req = skcipher_request_alloc(tfm, GFP_KERNEL); + if (!req) { + dev_err(pfvf->dev, "failed to allocate request for skcipher\n"); + err = -ENOMEM; + goto free_tfm; + } + + err = crypto_skcipher_setkey(tfm, sak, sak_len); + if (err) { + dev_err(pfvf->dev, "failed to set key for skcipher\n"); + goto free_req; + } + + /* build sg list */ + sg_init_one(&sg_src, data, CN10K_MAX_HASH_LEN); + sg_init_one(&sg_dst, hash, CN10K_MAX_HASH_LEN); + + skcipher_request_set_callback(req, 0, crypto_req_done, &wait); + skcipher_request_set_crypt(req, &sg_src, &sg_dst, + CN10K_MAX_HASH_LEN, NULL); + + err = crypto_skcipher_encrypt(req); + err = crypto_wait_req(err, &wait); + +free_req: + skcipher_request_free(req); +free_tfm: + crypto_free_skcipher(tfm); + return err; +} + static struct cn10k_mcs_txsc *cn10k_mcs_get_txsc(struct cn10k_mcs_cfg *cfg, struct macsec_secy *secy) { @@ -330,19 +381,53 @@ fail: return ret; } +static int cn10k_mcs_write_keys(struct otx2_nic *pfvf, + struct macsec_secy *secy, + struct mcs_sa_plcy_write_req *req, + u8 *sak, u8 *salt, ssci_t ssci) +{ + u8 hash_rev[CN10K_MAX_HASH_LEN]; + u8 sak_rev[CN10K_MAX_SAK_LEN]; + u8 salt_rev[MACSEC_SALT_LEN]; + u8 hash[CN10K_MAX_HASH_LEN]; + u32 ssci_63_32; + int err, i; + + err = cn10k_ecb_aes_encrypt(pfvf, sak, secy->key_len, hash); + if (err) { + dev_err(pfvf->dev, "Generating hash using ECB(AES) failed\n"); + return err; + } + + for (i = 0; i < secy->key_len; i++) + sak_rev[i] = sak[secy->key_len - 1 - i]; + + for (i = 0; i < CN10K_MAX_HASH_LEN; i++) + hash_rev[i] = hash[CN10K_MAX_HASH_LEN - 1 - i]; + + for (i = 0; i < MACSEC_SALT_LEN; i++) + salt_rev[i] = salt[MACSEC_SALT_LEN - 1 - i]; + + ssci_63_32 = (__force u32)cpu_to_be32((__force u32)ssci); + + memcpy(&req->plcy[0][0], sak_rev, secy->key_len); + memcpy(&req->plcy[0][4], hash_rev, CN10K_MAX_HASH_LEN); + memcpy(&req->plcy[0][6], salt_rev, MACSEC_SALT_LEN); + req->plcy[0][7] |= (u64)ssci_63_32 << 32; + + return 0; +} + static int cn10k_mcs_write_rx_sa_plcy(struct otx2_nic *pfvf, struct macsec_secy *secy, struct cn10k_mcs_rxsc *rxsc, u8 assoc_num, bool sa_in_use) { - unsigned char *src = rxsc->sa_key[assoc_num]; struct mcs_sa_plcy_write_req *plcy_req; - u8 *salt_p = rxsc->salt[assoc_num]; + u8 *sak = rxsc->sa_key[assoc_num]; + u8 *salt = rxsc->salt[assoc_num]; struct mcs_rx_sc_sa_map *map_req; struct mbox *mbox = &pfvf->mbox; - u64 ssci_salt_95_64 = 0; - u8 reg, key_len; - u64 salt_63_0; int ret; mutex_lock(&mbox->lock); @@ -360,20 +445,10 @@ static int cn10k_mcs_write_rx_sa_plcy(struct otx2_nic *pfvf, goto fail; } - for (reg = 0, key_len = 0; key_len < secy->key_len; key_len += 8) { - memcpy((u8 *)&plcy_req->plcy[0][reg], - (src + reg * 8), 8); - reg++; - } - - if (secy->xpn) { - memcpy((u8 *)&salt_63_0, salt_p, 8); - memcpy((u8 *)&ssci_salt_95_64, salt_p + 8, 4); - ssci_salt_95_64 |= (__force u64)rxsc->ssci[assoc_num] << 32; - - plcy_req->plcy[0][6] = salt_63_0; - plcy_req->plcy[0][7] = ssci_salt_95_64; - } + ret = cn10k_mcs_write_keys(pfvf, secy, plcy_req, sak, + salt, rxsc->ssci[assoc_num]); + if (ret) + goto fail; plcy_req->sa_index[0] = rxsc->hw_sa_id[assoc_num]; plcy_req->sa_cnt = 1; @@ -586,13 +661,10 @@ static int cn10k_mcs_write_tx_sa_plcy(struct otx2_nic *pfvf, struct cn10k_mcs_txsc *txsc, u8 assoc_num) { - unsigned char *src = txsc->sa_key[assoc_num]; struct mcs_sa_plcy_write_req *plcy_req; - u8 *salt_p = txsc->salt[assoc_num]; + u8 *sak = txsc->sa_key[assoc_num]; + u8 *salt = txsc->salt[assoc_num]; struct mbox *mbox = &pfvf->mbox; - u64 ssci_salt_95_64 = 0; - u8 reg, key_len; - u64 salt_63_0; int ret; mutex_lock(&mbox->lock); @@ -603,19 +675,10 @@ static int cn10k_mcs_write_tx_sa_plcy(struct otx2_nic *pfvf, goto fail; } - for (reg = 0, key_len = 0; key_len < secy->key_len; key_len += 8) { - memcpy((u8 *)&plcy_req->plcy[0][reg], (src + reg * 8), 8); - reg++; - } - - if (secy->xpn) { - memcpy((u8 *)&salt_63_0, salt_p, 8); - memcpy((u8 *)&ssci_salt_95_64, salt_p + 8, 4); - ssci_salt_95_64 |= (__force u64)txsc->ssci[assoc_num] << 32; - - plcy_req->plcy[0][6] = salt_63_0; - plcy_req->plcy[0][7] = ssci_salt_95_64; - } + ret = cn10k_mcs_write_keys(pfvf, secy, plcy_req, sak, + salt, txsc->ssci[assoc_num]); + if (ret) + goto fail; plcy_req->plcy[0][8] = assoc_num; plcy_req->sa_index[0] = txsc->hw_sa_id[assoc_num]; -- cgit v1.2.3 From 957961b6dcc813e6222a4f7e8e3626fcd1f1e098 Mon Sep 17 00:00:00 2001 From: Joaquín Ignacio Aramendía Date: Mon, 17 Jul 2023 19:25:15 -0300 Subject: hwmon: (oxp-sensors) Move tt_toggle attribute to dev_groups MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A driver should not be manually adding groups in its probe function (it will race with userspace), so replace the call to devm_device_add_groups() to use the platform dev_groups callback instead. This will allow for removal of the devm_device_add_groups() function. Signed-off-by: Joaquín Ignacio Aramendía Fixes: be144ee49127 ("hwmon: (oxp-sensors) Add tt_toggle attribute on supported boards") Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20230717222526.229984-2-samsagax@gmail.com Signed-off-by: Guenter Roeck --- drivers/hwmon/oxp-sensors.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/oxp-sensors.c b/drivers/hwmon/oxp-sensors.c index e1a907cae820..1e1cc67bcdea 100644 --- a/drivers/hwmon/oxp-sensors.c +++ b/drivers/hwmon/oxp-sensors.c @@ -220,6 +220,20 @@ static int tt_toggle_disable(void) } /* Callbacks for turbo toggle attribute */ +static umode_t tt_toggle_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + switch (board) { + case aok_zoe_a1: + case oxp_mini_amd_a07: + case oxp_mini_amd_pro: + return attr->mode; + default: + break; + } + return 0; +} + static ssize_t tt_toggle_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -396,7 +410,15 @@ static struct attribute *oxp_ec_attrs[] = { NULL }; -ATTRIBUTE_GROUPS(oxp_ec); +static struct attribute_group oxp_ec_attribute_group = { + .is_visible = tt_toggle_is_visible, + .attrs = oxp_ec_attrs, +}; + +static const struct attribute_group *oxp_ec_groups[] = { + &oxp_ec_attribute_group, + NULL +}; static const struct hwmon_ops oxp_ec_hwmon_ops = { .is_visible = oxp_ec_hwmon_is_visible, @@ -415,7 +437,6 @@ static int oxp_platform_probe(struct platform_device *pdev) const struct dmi_system_id *dmi_entry; struct device *dev = &pdev->dev; struct device *hwdev; - int ret; /* * Have to check for AMD processor here because DMI strings are the @@ -430,18 +451,6 @@ static int oxp_platform_probe(struct platform_device *pdev) board = (enum oxp_board)(unsigned long)dmi_entry->driver_data; - switch (board) { - case aok_zoe_a1: - case oxp_mini_amd_a07: - case oxp_mini_amd_pro: - ret = devm_device_add_groups(dev, oxp_ec_groups); - if (ret) - return ret; - break; - default: - break; - } - hwdev = devm_hwmon_device_register_with_info(dev, "oxpec", NULL, &oxp_ec_chip_info, NULL); @@ -451,6 +460,7 @@ static int oxp_platform_probe(struct platform_device *pdev) static struct platform_driver oxp_platform_driver = { .driver = { .name = "oxp-platform", + .dev_groups = oxp_ec_groups, }, .probe = oxp_platform_probe, }; -- cgit v1.2.3 From 53cab4d871690c49fac87c657cbf459e39c5b93b Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 17 Jul 2023 16:54:09 +0200 Subject: soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child The blk-ctrl device is deliberately placed outside of the GPC power domain as it needs to control the power sequencing of the blk-ctrl domains together with the GPC domains. Clock runtime PM works by operating on the clock parent device, which doesn't translate into the neccessary GPC power domain action if the clk parent is not part of the GPC power domain. Use the bus_power_device as the parent for the clock to trigger the proper GPC domain actions on clock runtime power management. Fixes: 2cbee26e5d59 ("soc: imx: imx8mp-blk-ctrl: expose high performance PLL clock") Reported-by: Yannic Moog Signed-off-by: Lucas Stach Tested-by: Yannic Moog Signed-off-by: Shawn Guo --- drivers/soc/imx/imx8mp-blk-ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/soc/imx/imx8mp-blk-ctrl.c b/drivers/soc/imx/imx8mp-blk-ctrl.c index 870aecc0202a..1c1fcab4979a 100644 --- a/drivers/soc/imx/imx8mp-blk-ctrl.c +++ b/drivers/soc/imx/imx8mp-blk-ctrl.c @@ -164,7 +164,7 @@ static int imx8mp_hsio_blk_ctrl_probe(struct imx8mp_blk_ctrl *bc) clk_hsio_pll->hw.init = &init; hw = &clk_hsio_pll->hw; - ret = devm_clk_hw_register(bc->dev, hw); + ret = devm_clk_hw_register(bc->bus_power_dev, hw); if (ret) return ret; -- cgit v1.2.3 From 752a281032b2d6f4564be827e082bde6f7d2fd4f Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Jul 2023 14:40:49 +1000 Subject: drm/nouveau/i2c: fix number of aux event slots This was completely bogus before, using maximum DCB device index rather than maximum AUX ID to size the buffer that stores event refcounts. *Pretty* unlikely to have been an actual problem on most configurations, that is, unless you've got one of the rare boards that have off-chip DP. There, it'll likely crash. Cc: stable@vger.kernel.org # 6.4+ Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20230719044051.6975-1-skeggsb@gmail.com --- drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h | 4 ++-- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c | 11 +++++++++-- 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h index 40a1065ae626..ef441dfdea09 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/i2c.h @@ -16,7 +16,7 @@ struct nvkm_i2c_bus { const struct nvkm_i2c_bus_func *func; struct nvkm_i2c_pad *pad; #define NVKM_I2C_BUS_CCB(n) /* 'n' is ccb index */ (n) -#define NVKM_I2C_BUS_EXT(n) /* 'n' is dcb external encoder type */ ((n) + 0x100) +#define NVKM_I2C_BUS_EXT(n) /* 'n' is dcb external encoder type */ ((n) + 0x10) #define NVKM_I2C_BUS_PRI /* ccb primary comm. port */ -1 #define NVKM_I2C_BUS_SEC /* ccb secondary comm. port */ -2 int id; @@ -38,7 +38,7 @@ struct nvkm_i2c_aux { const struct nvkm_i2c_aux_func *func; struct nvkm_i2c_pad *pad; #define NVKM_I2C_AUX_CCB(n) /* 'n' is ccb index */ (n) -#define NVKM_I2C_AUX_EXT(n) /* 'n' is dcb external encoder type */ ((n) + 0x100) +#define NVKM_I2C_AUX_EXT(n) /* 'n' is dcb external encoder type */ ((n) + 0x10) int id; struct mutex mutex; diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c index 976539de4220..731b2f68d3db 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/base.c @@ -260,10 +260,11 @@ nvkm_i2c_new_(const struct nvkm_i2c_func *func, struct nvkm_device *device, { struct nvkm_bios *bios = device->bios; struct nvkm_i2c *i2c; + struct nvkm_i2c_aux *aux; struct dcb_i2c_entry ccbE; struct dcb_output dcbE; u8 ver, hdr; - int ret, i; + int ret, i, ids; if (!(i2c = *pi2c = kzalloc(sizeof(*i2c), GFP_KERNEL))) return -ENOMEM; @@ -406,5 +407,11 @@ nvkm_i2c_new_(const struct nvkm_i2c_func *func, struct nvkm_device *device, } } - return nvkm_event_init(&nvkm_i2c_intr_func, &i2c->subdev, 4, i, &i2c->event); + ids = 0; + list_for_each_entry(aux, &i2c->aux, head) + ids = max(ids, aux->id + 1); + if (!ids) + return 0; + + return nvkm_event_init(&nvkm_i2c_intr_func, &i2c->subdev, 4, ids, &i2c->event); } -- cgit v1.2.3 From 2b5d1c29f6c4cb19369ef92881465e5ede75f4ef Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Jul 2023 14:40:50 +1000 Subject: drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts Fixes crash on boards with ANX9805 TMDS/DP encoders. Cc: stable@vger.kernel.org # 6.4+ Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20230719044051.6975-2-skeggsb@gmail.com --- drivers/gpu/drm/nouveau/nvkm/engine/disp/uconn.c | 27 ++++++++++++++++-------- 1 file changed, 18 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/uconn.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/uconn.c index dad942be6679..46b057fe1412 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/uconn.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/uconn.c @@ -81,20 +81,29 @@ nvkm_uconn_uevent(struct nvkm_object *object, void *argv, u32 argc, struct nvkm_ return -ENOSYS; list_for_each_entry(outp, &conn->disp->outps, head) { - if (outp->info.connector == conn->index && outp->dp.aux) { - if (args->v0.types & NVIF_CONN_EVENT_V0_PLUG ) bits |= NVKM_I2C_PLUG; - if (args->v0.types & NVIF_CONN_EVENT_V0_UNPLUG) bits |= NVKM_I2C_UNPLUG; - if (args->v0.types & NVIF_CONN_EVENT_V0_IRQ ) bits |= NVKM_I2C_IRQ; + if (outp->info.connector == conn->index) + break; + } - return nvkm_uevent_add(uevent, &device->i2c->event, outp->dp.aux->id, bits, - nvkm_uconn_uevent_aux); - } + if (&outp->head == &conn->disp->outps) + return -EINVAL; + + if (outp->dp.aux && !outp->info.location) { + if (args->v0.types & NVIF_CONN_EVENT_V0_PLUG ) bits |= NVKM_I2C_PLUG; + if (args->v0.types & NVIF_CONN_EVENT_V0_UNPLUG) bits |= NVKM_I2C_UNPLUG; + if (args->v0.types & NVIF_CONN_EVENT_V0_IRQ ) bits |= NVKM_I2C_IRQ; + + return nvkm_uevent_add(uevent, &device->i2c->event, outp->dp.aux->id, bits, + nvkm_uconn_uevent_aux); } if (args->v0.types & NVIF_CONN_EVENT_V0_PLUG ) bits |= NVKM_GPIO_HI; if (args->v0.types & NVIF_CONN_EVENT_V0_UNPLUG) bits |= NVKM_GPIO_LO; - if (args->v0.types & NVIF_CONN_EVENT_V0_IRQ) - return -EINVAL; + if (args->v0.types & NVIF_CONN_EVENT_V0_IRQ) { + /* TODO: support DP IRQ on ANX9805 and remove this hack. */ + if (!outp->info.location) + return -EINVAL; + } return nvkm_uevent_add(uevent, &device->gpio->event, conn->info.hpd, bits, nvkm_uconn_uevent_gpio); -- cgit v1.2.3 From ea293f823a8805735d9e00124df81a8f448ed1ae Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 19 Jul 2023 14:40:51 +1000 Subject: drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP Fixes OOPS on boards with ANX9805 DP encoders. Cc: stable@vger.kernel.org # 6.4+ Signed-off-by: Ben Skeggs Reviewed-by: Karol Herbst Signed-off-by: Karol Herbst Link: https://patchwork.freedesktop.org/patch/msgid/20230719044051.6975-3-skeggsb@gmail.com --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 38d3fad0d97a..1bec819da876 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -1877,6 +1877,8 @@ nv50_pior_destroy(struct drm_encoder *encoder) nvif_outp_dtor(&nv_encoder->outp); drm_encoder_cleanup(encoder); + + mutex_destroy(&nv_encoder->dp.hpd_irq_lock); kfree(encoder); } @@ -1921,6 +1923,8 @@ nv50_pior_create(struct drm_connector *connector, struct dcb_output *dcbe) nv_encoder->i2c = ddc; nv_encoder->aux = aux; + mutex_init(&nv_encoder->dp.hpd_irq_lock); + encoder = to_drm_encoder(nv_encoder); encoder->possible_crtcs = dcbe->heads; encoder->possible_clones = 0; -- cgit v1.2.3 From 5a7adc6c1069ce31ef4f606ae9c05592c80a6ab5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 10 Jul 2023 14:34:25 +0200 Subject: gpio: tps68470: Make tps68470_gpio_output() always set the initial value Make tps68470_gpio_output() call tps68470_gpio_set() for output-only pins too, so that the initial value passed to gpiod_direction_output() is honored for these pins too. Fixes: 275b13a65547 ("gpio: Add support for TPS68470 GPIOs") Reviewed-by: Andy Shevchenko Reviewed-by: Daniel Scally Tested-by: Daniel Scally Reviewed-by: Sakari Ailus Signed-off-by: Hans de Goede Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-tps68470.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-tps68470.c b/drivers/gpio/gpio-tps68470.c index aaddcabe9b35..532deaddfd4e 100644 --- a/drivers/gpio/gpio-tps68470.c +++ b/drivers/gpio/gpio-tps68470.c @@ -91,13 +91,13 @@ static int tps68470_gpio_output(struct gpio_chip *gc, unsigned int offset, struct tps68470_gpio_data *tps68470_gpio = gpiochip_get_data(gc); struct regmap *regmap = tps68470_gpio->tps68470_regmap; + /* Set the initial value */ + tps68470_gpio_set(gc, offset, value); + /* rest are always outputs */ if (offset >= TPS68470_N_REGULAR_GPIO) return 0; - /* Set the initial value */ - tps68470_gpio_set(gc, offset, value); - return regmap_update_bits(regmap, TPS68470_GPIO_CTL_REG_A(offset), TPS68470_GPIO_MODE_MASK, TPS68470_GPIO_MODE_OUT_CMOS); -- cgit v1.2.3 From 78a93c31003cc53aca5d67b1bbe2d5b9fc37cc4d Mon Sep 17 00:00:00 2001 From: Yuanjun Gong Date: Mon, 17 Jul 2023 22:46:21 +0800 Subject: drivers: net: fix return value check in emac_tso_csum() in emac_tso_csum(), return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 0d80447d4d3b..d5c688a8d7be 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -1260,8 +1260,11 @@ static int emac_tso_csum(struct emac_adapter *adpt, if (skb->protocol == htons(ETH_P_IP)) { u32 pkt_len = ((unsigned char *)ip_hdr(skb) - skb->data) + ntohs(ip_hdr(skb)->tot_len); - if (skb->len > pkt_len) - pskb_trim(skb, pkt_len); + if (skb->len > pkt_len) { + ret = pskb_trim(skb, pkt_len); + if (unlikely(ret)) + return ret; + } } hdr_len = skb_tcp_all_headers(skb); -- cgit v1.2.3 From bce5603365d8184734ba7e6b22e74bd2c90a7167 Mon Sep 17 00:00:00 2001 From: Yuanjun Gong Date: Mon, 17 Jul 2023 22:46:52 +0800 Subject: drivers:net: fix return value check in ocelot_fdma_receive_skb ocelot_fdma_receive_skb should return false if an unexpected value is returned by pskb_trim. Signed-off-by: Yuanjun Gong Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot_fdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mscc/ocelot_fdma.c b/drivers/net/ethernet/mscc/ocelot_fdma.c index 8e3894cf5f7c..83a3ce0c568e 100644 --- a/drivers/net/ethernet/mscc/ocelot_fdma.c +++ b/drivers/net/ethernet/mscc/ocelot_fdma.c @@ -368,7 +368,8 @@ static bool ocelot_fdma_receive_skb(struct ocelot *ocelot, struct sk_buff *skb) if (unlikely(!ndev)) return false; - pskb_trim(skb, skb->len - ETH_FCS_LEN); + if (pskb_trim(skb, skb->len - ETH_FCS_LEN)) + return false; skb->dev = ndev; skb->protocol = eth_type_trans(skb, skb->dev); -- cgit v1.2.3 From 1945063eb59e64d2919cb14d54d081476d9e53bb Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 17 Jul 2023 16:27:43 +0200 Subject: gpio: mvebu: Make use of devm_pwmchip_add MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This allows to get rid of a call to pwmchip_remove() in the error path. There is no .remove function for this driver, so this change fixes a resource leak when a gpio-mvebu device is unbound. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mvebu.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index a68f682aec01..a35958e7adf6 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -874,7 +874,7 @@ static int mvebu_pwm_probe(struct platform_device *pdev, spin_lock_init(&mvpwm->lock); - return pwmchip_add(&mvpwm->chip); + return devm_pwmchip_add(dev, &mvpwm->chip); } #ifdef CONFIG_DEBUG_FS @@ -1243,8 +1243,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev) if (!mvchip->domain) { dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", mvchip->chip.label); - err = -ENODEV; - goto err_pwm; + return -ENODEV; } err = irq_alloc_domain_generic_chips( @@ -1296,9 +1295,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev) err_domain: irq_domain_remove(mvchip->domain); -err_pwm: - pwmchip_remove(&mvchip->mvpwm->chip); - return err; } -- cgit v1.2.3 From b460a52257b1f5299ca70b7d1bb32442d3ce7bf6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 19 Jul 2023 00:30:40 +0100 Subject: regcache: Push async I/O request down into the rbtree cache Currently the regcache core unconditionally enables async I/O for all cache types, causing problems for the maple tree cache which dynamically allocates the buffers used to write registers to the device since async requires the buffers to be kept around until the I/O has been completed. This use of async I/O is mainly for the rbtree cache which stores data in a format directly usable for regmap_raw_write(), though there is a special case for single register writes which would also have allowed it to be used with the flat cache. It is a bit of a landmine for other caches since it implicitly converts sync operations to async, and with modern hardware it is not clear that async I/O is actually a performance win as shown by the performance work David Jander did with SPI. In multi core systems the cost of managing concurrency ends up swamping the performance benefit and almost all modern systems are multi core. Address this by pushing the enablement of async I/O down into the rbtree cache where it is actively used, avoiding surprises for other cache implementations. Reported-by: Charles Keepax Fixes: bfa0b38c1483 ("regmap: maple: Implement block sync for the maple tree cache") Reviewed-by: Charles Keepax Tested-by: Charles Keepax Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20230719-regcache-async-rbtree-v1-1-b03d30cf1daf@kernel.org Signed-off-by: Mark Brown --- drivers/base/regmap/regcache-rbtree.c | 4 ++++ drivers/base/regmap/regcache.c | 3 --- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/base/regmap/regcache-rbtree.c b/drivers/base/regmap/regcache-rbtree.c index fabf87058d80..584bcc55f56e 100644 --- a/drivers/base/regmap/regcache-rbtree.c +++ b/drivers/base/regmap/regcache-rbtree.c @@ -471,6 +471,8 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, unsigned int start, end; int ret; + map->async = true; + rbtree_ctx = map->cache; for (node = rb_first(&rbtree_ctx->root); node; node = rb_next(node)) { rbnode = rb_entry(node, struct regcache_rbtree_node, node); @@ -499,6 +501,8 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min, return ret; } + map->async = false; + return regmap_async_complete(map); } diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 28bc3ae9458a..7d3e47436056 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -368,8 +368,6 @@ int regcache_sync(struct regmap *map) if (!map->cache_dirty) goto out; - map->async = true; - /* Apply any patch first */ map->cache_bypass = true; for (i = 0; i < map->patch_regs; i++) { @@ -392,7 +390,6 @@ int regcache_sync(struct regmap *map) out: /* Restore the bypass state */ - map->async = false; map->cache_bypass = bypass; map->no_sync_defaults = false; map->unlock(map->lock_arg); -- cgit v1.2.3 From da042eb4f061a0b54aedadcaa15391490c48e1ad Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 19 Jul 2023 08:16:52 +0200 Subject: firmware: arm_scmi: Drop OF node reference in the transport channel setup The OF node reference obtained from of_parse_phandle() should be dropped if node is not compatible with arm,scmi-shmem. Fixes: 507cd4d2c5eb ("firmware: arm_scmi: Add compatibility checks for shmem node") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Cristian Marussi Link: https://lore.kernel.org/r/20230719061652.8850-1-krzysztof.kozlowski@linaro.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/mailbox.c | 4 +++- drivers/firmware/arm_scmi/smc.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/mailbox.c b/drivers/firmware/arm_scmi/mailbox.c index 1efa5e9392c4..19246ed1f01f 100644 --- a/drivers/firmware/arm_scmi/mailbox.c +++ b/drivers/firmware/arm_scmi/mailbox.c @@ -166,8 +166,10 @@ static int mailbox_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, return -ENOMEM; shmem = of_parse_phandle(cdev->of_node, "shmem", idx); - if (!of_device_is_compatible(shmem, "arm,scmi-shmem")) + if (!of_device_is_compatible(shmem, "arm,scmi-shmem")) { + of_node_put(shmem); return -ENXIO; + } ret = of_address_to_resource(shmem, 0, &res); of_node_put(shmem); diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c index 621c37efe3ec..2d8c510fbf52 100644 --- a/drivers/firmware/arm_scmi/smc.c +++ b/drivers/firmware/arm_scmi/smc.c @@ -137,8 +137,10 @@ static int smc_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, return -ENOMEM; np = of_parse_phandle(cdev->of_node, "shmem", 0); - if (!of_device_is_compatible(np, "arm,scmi-shmem")) + if (!of_device_is_compatible(np, "arm,scmi-shmem")) { + of_node_put(np); return -ENXIO; + } ret = of_address_to_resource(np, 0, &res); of_node_put(np); -- cgit v1.2.3 From d46b0a05bdc849d39c75268ddaf654c59bd6785c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jul 2023 19:56:08 +0200 Subject: Revert "intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()" This reverts commit b2918089d5cb ("intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()"), because the commit fixed by it will be reverted. Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index b930036edbbe..34201d7ef33e 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -2147,7 +2147,7 @@ static void __init intel_idle_cpuidle_devices_uninit(void) * All our short idle states are dominated by vmexit/vmenter latencies, * not the underlying hardware latencies so we keep our values for these. */ -static void __init matchup_vm_state_with_baremetal(void) +static void matchup_vm_state_with_baremetal(void) { int cstate; -- cgit v1.2.3 From a5155c023d6a2c9ff5f4fad5f75117578a58affc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jul 2023 19:57:39 +0200 Subject: Revert "intel_idle: Add a "Long HLT" C1 state for the VM guest mode" This reverts commit 0fac214bb75e ("intel_idle: Add a "Long HLT" C1 state for the VM guest mode"), because there is a coding mistake in it and its validity is questioned. Link: https://lore.kernel.org/all/20230711132553.GN3062772@hirez.programming.kicks-ass.net Requested-by: Peter Zijlstra Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 55 ----------------------------------------------- 1 file changed, 55 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 34201d7ef33e..a80e1f520293 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -1287,13 +1287,6 @@ static struct cpuidle_state vmguest_cstates[] __initdata = { .exit_latency = 5, .target_residency = 10, .enter = &intel_idle_hlt, }, - { - .name = "C1L", - .desc = "Long HLT", - .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 5, - .target_residency = 200, - .enter = &intel_idle_hlt, }, { .enter = NULL } }; @@ -2137,45 +2130,6 @@ static void __init intel_idle_cpuidle_devices_uninit(void) cpuidle_unregister_device(per_cpu_ptr(intel_idle_cpuidle_devices, i)); } -/* - * Match up the latency and break even point of the bare metal (cpu based) - * states with the deepest VM available state. - * - * We only want to do this for the deepest state, the ones that has - * the TLB_FLUSHED flag set on the . - * - * All our short idle states are dominated by vmexit/vmenter latencies, - * not the underlying hardware latencies so we keep our values for these. - */ -static void matchup_vm_state_with_baremetal(void) -{ - int cstate; - - for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) { - int matching_cstate; - - if (intel_idle_max_cstate_reached(cstate)) - break; - - if (!cpuidle_state_table[cstate].enter) - break; - - if (!(cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_TLB_FLUSHED)) - continue; - - for (matching_cstate = 0; matching_cstate < CPUIDLE_STATE_MAX; ++matching_cstate) { - if (!icpu->state_table[matching_cstate].enter) - break; - if (icpu->state_table[matching_cstate].exit_latency > cpuidle_state_table[cstate].exit_latency) { - cpuidle_state_table[cstate].exit_latency = icpu->state_table[matching_cstate].exit_latency; - cpuidle_state_table[cstate].target_residency = icpu->state_table[matching_cstate].target_residency; - } - } - - } -} - - static int __init intel_idle_vminit(const struct x86_cpu_id *id) { int retval; @@ -2191,15 +2145,6 @@ static int __init intel_idle_vminit(const struct x86_cpu_id *id) if (!intel_idle_cpuidle_devices) return -ENOMEM; - /* - * We don't know exactly what the host will do when we go idle, but as a worst estimate - * we can assume that the exit latency of the deepest host state will be hit for our - * deep (long duration) guest idle state. - * The same logic applies to the break even point for the long duration guest idle state. - * So lets copy these two properties from the table we found for the host CPU type. - */ - matchup_vm_state_with_baremetal(); - intel_idle_cpuidle_driver_init(&intel_idle_driver); retval = cpuidle_register_driver(&intel_idle_driver); -- cgit v1.2.3 From 5534f44627418897cd901d725303ce3dedd7bc1e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 19 Jul 2023 20:10:03 +0200 Subject: Revert "intel_idle: Add support for using intel_idle in a VM guest using just hlt" This reverts commit 2f3d08f074b0 ("intel_idle: Add support for using intel_idle in a VM guest using just hlt"), because it causes functional issues to appear and it is not really useful without a related commit that got reverted previously. Link: https://lore.kernel.org/linux-pm/5c7de6d5-7706-c4a5-7c41-146db1269aff@intel.com Reported-by: Xiaoyao Li Requested-by: Peter Zijlstra Signed-off-by: Rafael J. Wysocki --- drivers/idle/intel_idle.c | 117 +--------------------------------------------- 1 file changed, 1 insertion(+), 116 deletions(-) (limited to 'drivers') diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index a80e1f520293..256c2d42e350 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -199,43 +199,6 @@ static __cpuidle int intel_idle_xstate(struct cpuidle_device *dev, return __intel_idle(dev, drv, index); } -static __always_inline int __intel_idle_hlt(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - raw_safe_halt(); - raw_local_irq_disable(); - return index; -} - -/** - * intel_idle_hlt - Ask the processor to enter the given idle state using hlt. - * @dev: cpuidle device of the target CPU. - * @drv: cpuidle driver (assumed to point to intel_idle_driver). - * @index: Target idle state index. - * - * Use the HLT instruction to notify the processor that the CPU represented by - * @dev is idle and it can try to enter the idle state corresponding to @index. - * - * Must be called under local_irq_disable(). - */ -static __cpuidle int intel_idle_hlt(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - return __intel_idle_hlt(dev, drv, index); -} - -static __cpuidle int intel_idle_hlt_irq_on(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) -{ - int ret; - - raw_local_irq_enable(); - ret = __intel_idle_hlt(dev, drv, index); - raw_local_irq_disable(); - - return ret; -} - /** * intel_idle_s2idle - Ask the processor to enter the given idle state. * @dev: cpuidle device of the target CPU. @@ -1279,18 +1242,6 @@ static struct cpuidle_state snr_cstates[] __initdata = { .enter = NULL } }; -static struct cpuidle_state vmguest_cstates[] __initdata = { - { - .name = "C1", - .desc = "HLT", - .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_IRQ_ENABLE, - .exit_latency = 5, - .target_residency = 10, - .enter = &intel_idle_hlt, }, - { - .enter = NULL } -}; - static const struct idle_cpu idle_cpu_nehalem __initconst = { .state_table = nehalem_cstates, .auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE, @@ -1890,16 +1841,6 @@ static bool __init intel_idle_verify_cstate(unsigned int mwait_hint) static void state_update_enter_method(struct cpuidle_state *state, int cstate) { - if (state->enter == intel_idle_hlt) { - if (force_irq_on) { - pr_info("forced intel_idle_irq for state %d\n", cstate); - state->enter = intel_idle_hlt_irq_on; - } - return; - } - if (state->enter == intel_idle_hlt_irq_on) - return; /* no update scenarios */ - if (state->flags & CPUIDLE_FLAG_INIT_XSTATE) { /* * Combining with XSTATE with IBRS or IRQ_ENABLE flags @@ -1933,21 +1874,6 @@ static void state_update_enter_method(struct cpuidle_state *state, int cstate) } } -/* - * For mwait based states, we want to verify the cpuid data to see if the state - * is actually supported by this specific CPU. - * For non-mwait based states, this check should be skipped. - */ -static bool should_verify_mwait(struct cpuidle_state *state) -{ - if (state->enter == intel_idle_hlt) - return false; - if (state->enter == intel_idle_hlt_irq_on) - return false; - - return true; -} - static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv) { int cstate; @@ -1996,7 +1922,7 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv) } mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags); - if (should_verify_mwait(&cpuidle_state_table[cstate]) && !intel_idle_verify_cstate(mwait_hint)) + if (!intel_idle_verify_cstate(mwait_hint)) continue; /* Structure copy. */ @@ -2130,45 +2056,6 @@ static void __init intel_idle_cpuidle_devices_uninit(void) cpuidle_unregister_device(per_cpu_ptr(intel_idle_cpuidle_devices, i)); } -static int __init intel_idle_vminit(const struct x86_cpu_id *id) -{ - int retval; - - cpuidle_state_table = vmguest_cstates; - - icpu = (const struct idle_cpu *)id->driver_data; - - pr_debug("v" INTEL_IDLE_VERSION " model 0x%X\n", - boot_cpu_data.x86_model); - - intel_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device); - if (!intel_idle_cpuidle_devices) - return -ENOMEM; - - intel_idle_cpuidle_driver_init(&intel_idle_driver); - - retval = cpuidle_register_driver(&intel_idle_driver); - if (retval) { - struct cpuidle_driver *drv = cpuidle_get_driver(); - printk(KERN_DEBUG pr_fmt("intel_idle yielding to %s\n"), - drv ? drv->name : "none"); - goto init_driver_fail; - } - - retval = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "idle/intel:online", - intel_idle_cpu_online, NULL); - if (retval < 0) - goto hp_setup_fail; - - return 0; -hp_setup_fail: - intel_idle_cpuidle_devices_uninit(); - cpuidle_unregister_driver(&intel_idle_driver); -init_driver_fail: - free_percpu(intel_idle_cpuidle_devices); - return retval; -} - static int __init intel_idle_init(void) { const struct x86_cpu_id *id; @@ -2187,8 +2074,6 @@ static int __init intel_idle_init(void) id = x86_match_cpu(intel_idle_ids); if (id) { if (!boot_cpu_has(X86_FEATURE_MWAIT)) { - if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) - return intel_idle_vminit(id); pr_debug("Please enable MWAIT in BIOS SETUP\n"); return -ENODEV; } -- cgit v1.2.3 From 1eb8d61ac5c9c7ec56bb96d433532807509b9288 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Jul 2023 15:42:50 +0800 Subject: clk: mediatek: mt8183: Add back SSPM related clocks This reverts commit 860690a93ef23b567f781c1b631623e27190f101. On the MT8183, the SSPM related clocks were removed claiming a lack of usage. This however causes some issues when the driver was converted to the new simple-probe mechanism. This mechanism allocates enough space for all the clocks defined in the clock driver, not the highest index in the DT binding. This leads to out-of-bound writes if their are holes in the DT binding or the driver (due to deprecated or unimplemented clocks). These errors can go unnoticed and cause memory corruption, leading to crashes in unrelated areas, or nothing at all. KASAN will detect them. Add the SSPM related clocks back to the MT8183 clock driver to fully implement the DT binding. The SSPM clocks are for the power management co-processor, and should never be turned off. They are marked as such. Fixes: 3f37ba7cc385 ("clk: mediatek: mt8183: Convert all remaining clocks to common probe") Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20230719074251.1219089-1-wenst@chromium.org Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/clk-mt8183.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c index 1ba421b38ec5..e31f94387d87 100644 --- a/drivers/clk/mediatek/clk-mt8183.c +++ b/drivers/clk/mediatek/clk-mt8183.c @@ -328,6 +328,14 @@ static const char * const atb_parents[] = { "syspll_d5" }; +static const char * const sspm_parents[] = { + "clk26m", + "univpll_d2_d4", + "syspll_d2_d2", + "univpll_d2_d2", + "syspll_d3" +}; + static const char * const dpi0_parents[] = { "clk26m", "tvdpll_d2", @@ -507,6 +515,9 @@ static const struct mtk_mux top_muxes[] = { /* CLK_CFG_6 */ MUX_GATE_CLR_SET_UPD(CLK_TOP_MUX_ATB, "atb_sel", atb_parents, 0xa0, 0xa4, 0xa8, 0, 2, 7, 0x004, 24), + MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_MUX_SSPM, "sspm_sel", + sspm_parents, 0xa0, 0xa4, 0xa8, 8, 3, 15, 0x004, 25, + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT), MUX_GATE_CLR_SET_UPD(CLK_TOP_MUX_DPI0, "dpi0_sel", dpi0_parents, 0xa0, 0xa4, 0xa8, 16, 4, 23, 0x004, 26), MUX_GATE_CLR_SET_UPD(CLK_TOP_MUX_SCAM, "scam_sel", @@ -673,10 +684,18 @@ static const struct mtk_gate_regs infra3_cg_regs = { GATE_MTK(_id, _name, _parent, &infra2_cg_regs, _shift, \ &mtk_clk_gate_ops_setclr) +#define GATE_INFRA2_FLAGS(_id, _name, _parent, _shift, _flag) \ + GATE_MTK_FLAGS(_id, _name, _parent, &infra2_cg_regs, \ + _shift, &mtk_clk_gate_ops_setclr, _flag) + #define GATE_INFRA3(_id, _name, _parent, _shift) \ GATE_MTK(_id, _name, _parent, &infra3_cg_regs, _shift, \ &mtk_clk_gate_ops_setclr) +#define GATE_INFRA3_FLAGS(_id, _name, _parent, _shift, _flag) \ + GATE_MTK_FLAGS(_id, _name, _parent, &infra3_cg_regs, \ + _shift, &mtk_clk_gate_ops_setclr, _flag) + static const struct mtk_gate infra_clks[] = { /* INFRA0 */ GATE_INFRA0(CLK_INFRA_PMIC_TMR, "infra_pmic_tmr", "axi_sel", 0), @@ -748,7 +767,11 @@ static const struct mtk_gate infra_clks[] = { GATE_INFRA2(CLK_INFRA_UNIPRO_TICK, "infra_unipro_tick", "fufs_sel", 12), GATE_INFRA2(CLK_INFRA_UFS_MP_SAP_BCLK, "infra_ufs_mp_sap_bck", "fufs_sel", 13), GATE_INFRA2(CLK_INFRA_MD32_BCLK, "infra_md32_bclk", "axi_sel", 14), + /* infra_sspm is main clock in co-processor, should not be closed in Linux. */ + GATE_INFRA2_FLAGS(CLK_INFRA_SSPM, "infra_sspm", "sspm_sel", 15, CLK_IS_CRITICAL), GATE_INFRA2(CLK_INFRA_UNIPRO_MBIST, "infra_unipro_mbist", "axi_sel", 16), + /* infra_sspm_bus_hclk is main clock in co-processor, should not be closed in Linux. */ + GATE_INFRA2_FLAGS(CLK_INFRA_SSPM_BUS_HCLK, "infra_sspm_bus_hclk", "axi_sel", 17, CLK_IS_CRITICAL), GATE_INFRA2(CLK_INFRA_I2C5, "infra_i2c5", "i2c_sel", 18), GATE_INFRA2(CLK_INFRA_I2C5_ARBITER, "infra_i2c5_arbiter", "i2c_sel", 19), GATE_INFRA2(CLK_INFRA_I2C5_IMM, "infra_i2c5_imm", "i2c_sel", 20), @@ -766,6 +789,10 @@ static const struct mtk_gate infra_clks[] = { GATE_INFRA3(CLK_INFRA_MSDC0_SELF, "infra_msdc0_self", "msdc50_0_sel", 0), GATE_INFRA3(CLK_INFRA_MSDC1_SELF, "infra_msdc1_self", "msdc50_0_sel", 1), GATE_INFRA3(CLK_INFRA_MSDC2_SELF, "infra_msdc2_self", "msdc50_0_sel", 2), + /* infra_sspm_26m_self is main clock in co-processor, should not be closed in Linux. */ + GATE_INFRA3_FLAGS(CLK_INFRA_SSPM_26M_SELF, "infra_sspm_26m_self", "f_f26m_ck", 3, CLK_IS_CRITICAL), + /* infra_sspm_32k_self is main clock in co-processor, should not be closed in Linux. */ + GATE_INFRA3_FLAGS(CLK_INFRA_SSPM_32K_SELF, "infra_sspm_32k_self", "f_f26m_ck", 4, CLK_IS_CRITICAL), GATE_INFRA3(CLK_INFRA_UFS_AXI, "infra_ufs_axi", "axi_sel", 5), GATE_INFRA3(CLK_INFRA_I2C6, "infra_i2c6", "i2c_sel", 6), GATE_INFRA3(CLK_INFRA_AP_MSDC0, "infra_ap_msdc0", "msdc50_hclk_sel", 7), -- cgit v1.2.3 From 13558a2e6341d1ba6dff9f8e2febf97877067885 Mon Sep 17 00:00:00 2001 From: Ahmad Khalifa Date: Wed, 19 Jul 2023 20:28:48 +0100 Subject: hwmon: (nct6775) Fix IN scaling factors for 6798/6799 Scaling for VTT/VIN5/VIN6 registers were based on prior chips * Split scaling factors for 6798/6799 and assign at probe() * Pass them through driver data to sysfs functions Tested on nct6799 with old/new input/min/max Fixes: 0599682b826f ("hwmon: (nct6775) Add support for NCT6798D") Signed-off-by: Ahmad Khalifa Link: https://lore.kernel.org/r/20230719192848.337508-1-ahmad@khalifa.ws Signed-off-by: Guenter Roeck --- drivers/hwmon/nct6775-core.c | 28 ++++++++++++++++++++++------ drivers/hwmon/nct6775.h | 1 + 2 files changed, 23 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index 236dc97f4d22..08ce4984151d 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -955,14 +955,25 @@ static const u16 scale_in[15] = { 800, 800 }; -static inline long in_from_reg(u8 reg, u8 nr) +/* + * NCT6798 scaling: + * CPUVC, IN1, AVSB, 3VCC, IN0, IN8, IN4, 3VSB, VBAT, VTT, IN5, IN6, IN2, + * IN3, IN7 + * Additional scales to be added later: IN9 (800), VHIF (1600) + */ +static const u16 scale_in_6798[15] = { + 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 1600, 1600, 1600, 800, + 800, 800 +}; + +static inline long in_from_reg(u8 reg, u8 nr, const u16 *scales) { - return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100); + return DIV_ROUND_CLOSEST(reg * scales[nr], 100); } -static inline u8 in_to_reg(u32 val, u8 nr) +static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scales) { - return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255); + return clamp_val(DIV_ROUND_CLOSEST(val * 100, scales[nr]), 0, 255); } /* TSI temperatures are in 8.3 format */ @@ -1673,7 +1684,8 @@ show_in_reg(struct device *dev, struct device_attribute *attr, char *buf) if (IS_ERR(data)) return PTR_ERR(data); - return sprintf(buf, "%ld\n", in_from_reg(data->in[nr][index], nr)); + return sprintf(buf, "%ld\n", + in_from_reg(data->in[nr][index], nr, data->scale_in)); } static ssize_t @@ -1691,7 +1703,7 @@ store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf, if (err < 0) return err; mutex_lock(&data->update_lock); - data->in[nr][index] = in_to_reg(val, nr); + data->in[nr][index] = in_to_reg(val, nr, data->scale_in); err = nct6775_write_value(data, data->REG_IN_MINMAX[index - 1][nr], data->in[nr][index]); mutex_unlock(&data->update_lock); return err ? : count; @@ -3462,6 +3474,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, mutex_init(&data->update_lock); data->name = nct6775_device_names[data->kind]; data->bank = 0xff; /* Force initial bank selection */ + data->scale_in = scale_in; switch (data->kind) { case nct6106: @@ -3977,6 +3990,9 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, break; } + if (data->kind == nct6798 || data->kind == nct6799) + data->scale_in = scale_in_6798; + reg_temp = NCT6779_REG_TEMP; num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); if (data->kind == nct6791) { diff --git a/drivers/hwmon/nct6775.h b/drivers/hwmon/nct6775.h index 44f79c5726a9..a84c6ce7275d 100644 --- a/drivers/hwmon/nct6775.h +++ b/drivers/hwmon/nct6775.h @@ -98,6 +98,7 @@ struct nct6775_data { u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ + const u16 *scale_in; /* internal scaling factors */ unsigned int rpm[NUM_FAN]; u16 fan_min[NUM_FAN]; u8 fan_pulses[NUM_FAN]; -- cgit v1.2.3 From a29b2fccf5f2689a9637be85ff1f51c834c6fb33 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 11 Jul 2023 17:08:12 +0200 Subject: clk: imx93: Propagate correct error in imx93_clocks_probe() smatch reports: drivers/clk/imx/clk-imx93.c:294 imx93_clocks_probe() error: uninitialized symbol 'base'. Indeed, in case of an error, the wrong (yet uninitialized) variable is converted to an error code and returned. Fix this by propagating the error code in the correct variable. Fixes: e02ba11b45764705 ("clk: imx93: fix memory leak and missing unwind goto in imx93_clocks_probe") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/9c2acd81-3ad8-485d-819e-9e4201277831@kadam.mountain Reported-by: kernel test robot Closes: https://lore.kernel.org/all/202306161533.4YDmL22b-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20230711150812.3562221-1-geert+renesas@glider.be Reviewed-by: Peng Fan Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx93.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/imx/clk-imx93.c b/drivers/clk/imx/clk-imx93.c index b6c7c2725906..44f435103c65 100644 --- a/drivers/clk/imx/clk-imx93.c +++ b/drivers/clk/imx/clk-imx93.c @@ -291,7 +291,7 @@ static int imx93_clocks_probe(struct platform_device *pdev) anatop_base = devm_of_iomap(dev, np, 0, NULL); of_node_put(np); if (WARN_ON(IS_ERR(anatop_base))) { - ret = PTR_ERR(base); + ret = PTR_ERR(anatop_base); goto unregister_hws; } -- cgit v1.2.3 From e7dd44f4f3166db45248414f5df8f615392de47a Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 7 Jul 2023 21:58:51 +0800 Subject: clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset: ------ ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup': clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap' ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap' ------ Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He Cc: Michael Turquette Cc: Stephen Boyd Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230707135852.24292-8-bhe@redhat.com Signed-off-by: Stephen Boyd --- drivers/clk/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 93f38a8178ba..6b3b424addab 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -444,6 +444,7 @@ config COMMON_CLK_BD718XX config COMMON_CLK_FIXED_MMIO bool "Clock driver for Memory Mapped Fixed values" depends on COMMON_CLK && OF + depends on HAS_IOMEM help Support for Memory Mapped IO Fixed clocks -- cgit v1.2.3 From 8974eb588283b7d44a7c91fa09fcbaf380339f3a Mon Sep 17 00:00:00 2001 From: Daniel Sneddon Date: Wed, 12 Jul 2023 19:43:11 -0700 Subject: x86/speculation: Add Gather Data Sampling mitigation Gather Data Sampling (GDS) is a hardware vulnerability which allows unprivileged speculative access to data which was previously stored in vector registers. Intel processors that support AVX2 and AVX512 have gather instructions that fetch non-contiguous data elements from memory. On vulnerable hardware, when a gather instruction is transiently executed and encounters a fault, stale data from architectural or internal vector registers may get transiently stored to the destination vector register allowing an attacker to infer the stale data using typical side channel techniques like cache timing attacks. This mitigation is different from many earlier ones for two reasons. First, it is enabled by default and a bit must be set to *DISABLE* it. This is the opposite of normal mitigation polarity. This means GDS can be mitigated simply by updating microcode and leaving the new control bit alone. Second, GDS has a "lock" bit. This lock bit is there because the mitigation affects the hardware security features KeyLocker and SGX. It needs to be enabled and *STAY* enabled for these features to be mitigated against GDS. The mitigation is enabled in the microcode by default. Disable it by setting gather_data_sampling=off or by disabling all mitigations with mitigations=off. The mitigation status can be checked by reading: /sys/devices/system/cpu/vulnerabilities/gather_data_sampling Signed-off-by: Daniel Sneddon Signed-off-by: Dave Hansen Acked-by: Josh Poimboeuf --- Documentation/ABI/testing/sysfs-devices-system-cpu | 13 ++- .../admin-guide/hw-vuln/gather_data_sampling.rst | 99 ++++++++++++++++ Documentation/admin-guide/hw-vuln/index.rst | 1 + Documentation/admin-guide/kernel-parameters.txt | 41 ++++--- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/msr-index.h | 11 ++ arch/x86/kernel/cpu/bugs.c | 129 +++++++++++++++++++++ arch/x86/kernel/cpu/common.c | 34 ++++-- arch/x86/kernel/cpu/cpu.h | 1 + drivers/base/cpu.c | 8 ++ 10 files changed, 310 insertions(+), 28 deletions(-) create mode 100644 Documentation/admin-guide/hw-vuln/gather_data_sampling.rst (limited to 'drivers') diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index ecd585ca2d50..77942eedf4f6 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -513,17 +513,18 @@ Description: information about CPUs heterogeneity. cpu_capacity: capacity of cpuX. What: /sys/devices/system/cpu/vulnerabilities + /sys/devices/system/cpu/vulnerabilities/gather_data_sampling + /sys/devices/system/cpu/vulnerabilities/itlb_multihit + /sys/devices/system/cpu/vulnerabilities/l1tf + /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/meltdown + /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + /sys/devices/system/cpu/vulnerabilities/retbleed + /sys/devices/system/cpu/vulnerabilities/spec_store_bypass /sys/devices/system/cpu/vulnerabilities/spectre_v1 /sys/devices/system/cpu/vulnerabilities/spectre_v2 - /sys/devices/system/cpu/vulnerabilities/spec_store_bypass - /sys/devices/system/cpu/vulnerabilities/l1tf - /sys/devices/system/cpu/vulnerabilities/mds /sys/devices/system/cpu/vulnerabilities/srbds /sys/devices/system/cpu/vulnerabilities/tsx_async_abort - /sys/devices/system/cpu/vulnerabilities/itlb_multihit - /sys/devices/system/cpu/vulnerabilities/mmio_stale_data - /sys/devices/system/cpu/vulnerabilities/retbleed Date: January 2018 Contact: Linux kernel mailing list Description: Information about CPU vulnerabilities diff --git a/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst new file mode 100644 index 000000000000..74dab6af7fe1 --- /dev/null +++ b/Documentation/admin-guide/hw-vuln/gather_data_sampling.rst @@ -0,0 +1,99 @@ +.. SPDX-License-Identifier: GPL-2.0 + +GDS - Gather Data Sampling +========================== + +Gather Data Sampling is a hardware vulnerability which allows unprivileged +speculative access to data which was previously stored in vector registers. + +Problem +------- +When a gather instruction performs loads from memory, different data elements +are merged into the destination vector register. However, when a gather +instruction that is transiently executed encounters a fault, stale data from +architectural or internal vector registers may get transiently forwarded to the +destination vector register instead. This will allow a malicious attacker to +infer stale data using typical side channel techniques like cache timing +attacks. GDS is a purely sampling-based attack. + +The attacker uses gather instructions to infer the stale vector register data. +The victim does not need to do anything special other than use the vector +registers. The victim does not need to use gather instructions to be +vulnerable. + +Because the buffers are shared between Hyper-Threads cross Hyper-Thread attacks +are possible. + +Attack scenarios +---------------- +Without mitigation, GDS can infer stale data across virtually all +permission boundaries: + + Non-enclaves can infer SGX enclave data + Userspace can infer kernel data + Guests can infer data from hosts + Guest can infer guest from other guests + Users can infer data from other users + +Because of this, it is important to ensure that the mitigation stays enabled in +lower-privilege contexts like guests and when running outside SGX enclaves. + +The hardware enforces the mitigation for SGX. Likewise, VMMs should ensure +that guests are not allowed to disable the GDS mitigation. If a host erred and +allowed this, a guest could theoretically disable GDS mitigation, mount an +attack, and re-enable it. + +Mitigation mechanism +-------------------- +This issue is mitigated in microcode. The microcode defines the following new +bits: + + ================================ === ============================ + IA32_ARCH_CAPABILITIES[GDS_CTRL] R/O Enumerates GDS vulnerability + and mitigation support. + IA32_ARCH_CAPABILITIES[GDS_NO] R/O Processor is not vulnerable. + IA32_MCU_OPT_CTRL[GDS_MITG_DIS] R/W Disables the mitigation + 0 by default. + IA32_MCU_OPT_CTRL[GDS_MITG_LOCK] R/W Locks GDS_MITG_DIS=0. Writes + to GDS_MITG_DIS are ignored + Can't be cleared once set. + ================================ === ============================ + +GDS can also be mitigated on systems that don't have updated microcode by +disabling AVX. This can be done by setting "clearcpuid=avx" on the kernel +command-line. + +Mitigation control on the kernel command line +--------------------------------------------- +The mitigation can be disabled by setting "gather_data_sampling=off" or +"mitigations=off" on the kernel command line. Not specifying either will +default to the mitigation being enabled. + +GDS System Information +------------------------ +The kernel provides vulnerability status information through sysfs. For +GDS this can be accessed by the following sysfs file: + +/sys/devices/system/cpu/vulnerabilities/gather_data_sampling + +The possible values contained in this file are: + + ============================== ============================================= + Not affected Processor not vulnerable. + Vulnerable Processor vulnerable and mitigation disabled. + Vulnerable: No microcode Processor vulnerable and microcode is missing + mitigation. + Mitigation: Microcode Processor is vulnerable and mitigation is in + effect. + Mitigation: Microcode (locked) Processor is vulnerable and mitigation is in + effect and cannot be disabled. + Unknown: Dependent on + hypervisor status Running on a virtual guest processor that is + affected but with no way to know if host + processor is mitigated or vulnerable. + ============================== ============================================= + +GDS Default mitigation +---------------------- +The updated microcode will enable the mitigation by default. The kernel's +default action is to leave the mitigation enabled. diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst index e0614760a99e..436fac0bd9c3 100644 --- a/Documentation/admin-guide/hw-vuln/index.rst +++ b/Documentation/admin-guide/hw-vuln/index.rst @@ -19,3 +19,4 @@ are configurable at compile, boot or run time. l1d_flush.rst processor_mmio_stale_data.rst cross-thread-rsb.rst + gather_data_sampling.rst diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a1457995fd41..c21d42140d6b 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1623,6 +1623,20 @@ Format: off | on default: on + gather_data_sampling= + [X86,INTEL] Control the Gather Data Sampling (GDS) + mitigation. + + Gather Data Sampling is a hardware vulnerability which + allows unprivileged speculative access to data which was + previously stored in vector registers. + + This issue is mitigated by default in updated microcode. + The mitigation may have a performance impact but can be + disabled. + + off: Disable GDS mitigation. + gcov_persist= [GCOV] When non-zero (default), profiling data for kernel modules is saved and remains accessible via debugfs, even when the module is unloaded/reloaded. @@ -3273,24 +3287,25 @@ Disable all optional CPU mitigations. This improves system performance, but it may also expose users to several CPU vulnerabilities. - Equivalent to: nopti [X86,PPC] - if nokaslr then kpti=0 [ARM64] - nospectre_v1 [X86,PPC] - nobp=0 [S390] - nospectre_v2 [X86,PPC,S390,ARM64] - spectre_v2_user=off [X86] - spec_store_bypass_disable=off [X86,PPC] - ssbd=force-off [ARM64] - nospectre_bhb [ARM64] + Equivalent to: if nokaslr then kpti=0 [ARM64] + gather_data_sampling=off [X86] + kvm.nx_huge_pages=off [X86] l1tf=off [X86] mds=off [X86] - tsx_async_abort=off [X86] - kvm.nx_huge_pages=off [X86] - srbds=off [X86,INTEL] + mmio_stale_data=off [X86] no_entry_flush [PPC] no_uaccess_flush [PPC] - mmio_stale_data=off [X86] + nobp=0 [S390] + nopti [X86,PPC] + nospectre_bhb [ARM64] + nospectre_v1 [X86,PPC] + nospectre_v2 [X86,PPC,S390,ARM64] retbleed=off [X86] + spec_store_bypass_disable=off [X86,PPC] + spectre_v2_user=off [X86] + srbds=off [X86,INTEL] + ssbd=force-off [ARM64] + tsx_async_abort=off [X86] Exceptions: This does not have any effect on diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index cb8ca46213be..8d6b34726033 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -483,5 +483,6 @@ #define X86_BUG_RETBLEED X86_BUG(27) /* CPU is affected by RETBleed */ #define X86_BUG_EIBRS_PBRSB X86_BUG(28) /* EIBRS is vulnerable to Post Barrier RSB Predictions */ #define X86_BUG_SMT_RSB X86_BUG(29) /* CPU is vulnerable to Cross-Thread Return Address Predictions */ +#define X86_BUG_GDS X86_BUG(30) /* CPU is affected by Gather Data Sampling */ #endif /* _ASM_X86_CPUFEATURES_H */ diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 3aedae61af4f..348f3da8b0f6 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -155,6 +155,15 @@ * Not susceptible to Post-Barrier * Return Stack Buffer Predictions. */ +#define ARCH_CAP_GDS_CTRL BIT(25) /* + * CPU is vulnerable to Gather + * Data Sampling (GDS) and + * has controls for mitigation. + */ +#define ARCH_CAP_GDS_NO BIT(26) /* + * CPU is not vulnerable to Gather + * Data Sampling (GDS). + */ #define ARCH_CAP_XAPIC_DISABLE BIT(21) /* * IA32_XAPIC_DISABLE_STATUS MSR @@ -178,6 +187,8 @@ #define RNGDS_MITG_DIS BIT(0) /* SRBDS support */ #define RTM_ALLOW BIT(1) /* TSX development mode */ #define FB_CLEAR_DIS BIT(3) /* CPU Fill buffer clear disable */ +#define GDS_MITG_DIS BIT(4) /* Disable GDS mitigation */ +#define GDS_MITG_LOCKED BIT(5) /* GDS mitigation locked */ #define MSR_IA32_SYSENTER_CS 0x00000174 #define MSR_IA32_SYSENTER_ESP 0x00000175 diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 9e2a91830f72..7824b101ddfe 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -47,6 +47,7 @@ static void __init taa_select_mitigation(void); static void __init mmio_select_mitigation(void); static void __init srbds_select_mitigation(void); static void __init l1d_flush_select_mitigation(void); +static void __init gds_select_mitigation(void); /* The base value of the SPEC_CTRL MSR without task-specific bits set */ u64 x86_spec_ctrl_base; @@ -160,6 +161,7 @@ void __init cpu_select_mitigations(void) md_clear_select_mitigation(); srbds_select_mitigation(); l1d_flush_select_mitigation(); + gds_select_mitigation(); } /* @@ -645,6 +647,120 @@ static int __init l1d_flush_parse_cmdline(char *str) } early_param("l1d_flush", l1d_flush_parse_cmdline); +#undef pr_fmt +#define pr_fmt(fmt) "GDS: " fmt + +enum gds_mitigations { + GDS_MITIGATION_OFF, + GDS_MITIGATION_UCODE_NEEDED, + GDS_MITIGATION_FULL, + GDS_MITIGATION_FULL_LOCKED, + GDS_MITIGATION_HYPERVISOR, +}; + +static enum gds_mitigations gds_mitigation __ro_after_init = GDS_MITIGATION_FULL; + +static const char * const gds_strings[] = { + [GDS_MITIGATION_OFF] = "Vulnerable", + [GDS_MITIGATION_UCODE_NEEDED] = "Vulnerable: No microcode", + [GDS_MITIGATION_FULL] = "Mitigation: Microcode", + [GDS_MITIGATION_FULL_LOCKED] = "Mitigation: Microcode (locked)", + [GDS_MITIGATION_HYPERVISOR] = "Unknown: Dependent on hypervisor status", +}; + +void update_gds_msr(void) +{ + u64 mcu_ctrl_after; + u64 mcu_ctrl; + + switch (gds_mitigation) { + case GDS_MITIGATION_OFF: + rdmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl); + mcu_ctrl |= GDS_MITG_DIS; + break; + case GDS_MITIGATION_FULL_LOCKED: + /* + * The LOCKED state comes from the boot CPU. APs might not have + * the same state. Make sure the mitigation is enabled on all + * CPUs. + */ + case GDS_MITIGATION_FULL: + rdmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl); + mcu_ctrl &= ~GDS_MITG_DIS; + break; + case GDS_MITIGATION_UCODE_NEEDED: + case GDS_MITIGATION_HYPERVISOR: + return; + }; + + wrmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl); + + /* + * Check to make sure that the WRMSR value was not ignored. Writes to + * GDS_MITG_DIS will be ignored if this processor is locked but the boot + * processor was not. + */ + rdmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl_after); + WARN_ON_ONCE(mcu_ctrl != mcu_ctrl_after); +} + +static void __init gds_select_mitigation(void) +{ + u64 mcu_ctrl; + + if (!boot_cpu_has_bug(X86_BUG_GDS)) + return; + + if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) { + gds_mitigation = GDS_MITIGATION_HYPERVISOR; + goto out; + } + + if (cpu_mitigations_off()) + gds_mitigation = GDS_MITIGATION_OFF; + /* Will verify below that mitigation _can_ be disabled */ + + /* No microcode */ + if (!(x86_read_arch_cap_msr() & ARCH_CAP_GDS_CTRL)) { + gds_mitigation = GDS_MITIGATION_UCODE_NEEDED; + goto out; + } + + rdmsrl(MSR_IA32_MCU_OPT_CTRL, mcu_ctrl); + if (mcu_ctrl & GDS_MITG_LOCKED) { + if (gds_mitigation == GDS_MITIGATION_OFF) + pr_warn("Mitigation locked. Disable failed.\n"); + + /* + * The mitigation is selected from the boot CPU. All other CPUs + * _should_ have the same state. If the boot CPU isn't locked + * but others are then update_gds_msr() will WARN() of the state + * mismatch. If the boot CPU is locked update_gds_msr() will + * ensure the other CPUs have the mitigation enabled. + */ + gds_mitigation = GDS_MITIGATION_FULL_LOCKED; + } + + update_gds_msr(); +out: + pr_info("%s\n", gds_strings[gds_mitigation]); +} + +static int __init gds_parse_cmdline(char *str) +{ + if (!str) + return -EINVAL; + + if (!boot_cpu_has_bug(X86_BUG_GDS)) + return 0; + + if (!strcmp(str, "off")) + gds_mitigation = GDS_MITIGATION_OFF; + + return 0; +} +early_param("gather_data_sampling", gds_parse_cmdline); + #undef pr_fmt #define pr_fmt(fmt) "Spectre V1 : " fmt @@ -2382,6 +2498,11 @@ static ssize_t retbleed_show_state(char *buf) return sysfs_emit(buf, "%s\n", retbleed_strings[retbleed_mitigation]); } +static ssize_t gds_show_state(char *buf) +{ + return sysfs_emit(buf, "%s\n", gds_strings[gds_mitigation]); +} + static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr, char *buf, unsigned int bug) { @@ -2431,6 +2552,9 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr case X86_BUG_RETBLEED: return retbleed_show_state(buf); + case X86_BUG_GDS: + return gds_show_state(buf); + default: break; } @@ -2495,4 +2619,9 @@ ssize_t cpu_show_retbleed(struct device *dev, struct device_attribute *attr, cha { return cpu_show_common(dev, attr, buf, X86_BUG_RETBLEED); } + +ssize_t cpu_show_gds(struct device *dev, struct device_attribute *attr, char *buf) +{ + return cpu_show_common(dev, attr, buf, X86_BUG_GDS); +} #endif diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 52683fddafaf..53224fe3ca6f 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1250,6 +1250,8 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = { #define RETBLEED BIT(3) /* CPU is affected by SMT (cross-thread) return predictions */ #define SMT_RSB BIT(4) +/* CPU is affected by GDS */ +#define GDS BIT(5) static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = { VULNBL_INTEL_STEPPINGS(IVYBRIDGE, X86_STEPPING_ANY, SRBDS), @@ -1262,19 +1264,21 @@ static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = { VULNBL_INTEL_STEPPINGS(BROADWELL_X, X86_STEPPING_ANY, MMIO), VULNBL_INTEL_STEPPINGS(BROADWELL, X86_STEPPING_ANY, SRBDS), VULNBL_INTEL_STEPPINGS(SKYLAKE_L, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED), - VULNBL_INTEL_STEPPINGS(SKYLAKE_X, X86_STEPPING_ANY, MMIO | RETBLEED), + VULNBL_INTEL_STEPPINGS(SKYLAKE_X, X86_STEPPING_ANY, MMIO | RETBLEED | GDS), VULNBL_INTEL_STEPPINGS(SKYLAKE, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED), - VULNBL_INTEL_STEPPINGS(KABYLAKE_L, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED), - VULNBL_INTEL_STEPPINGS(KABYLAKE, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED), + VULNBL_INTEL_STEPPINGS(KABYLAKE_L, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED | GDS), + VULNBL_INTEL_STEPPINGS(KABYLAKE, X86_STEPPING_ANY, SRBDS | MMIO | RETBLEED | GDS), VULNBL_INTEL_STEPPINGS(CANNONLAKE_L, X86_STEPPING_ANY, RETBLEED), - VULNBL_INTEL_STEPPINGS(ICELAKE_L, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED), - VULNBL_INTEL_STEPPINGS(ICELAKE_D, X86_STEPPING_ANY, MMIO), - VULNBL_INTEL_STEPPINGS(ICELAKE_X, X86_STEPPING_ANY, MMIO), - VULNBL_INTEL_STEPPINGS(COMETLAKE, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED), + VULNBL_INTEL_STEPPINGS(ICELAKE_L, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED | GDS), + VULNBL_INTEL_STEPPINGS(ICELAKE_D, X86_STEPPING_ANY, MMIO | GDS), + VULNBL_INTEL_STEPPINGS(ICELAKE_X, X86_STEPPING_ANY, MMIO | GDS), + VULNBL_INTEL_STEPPINGS(COMETLAKE, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED | GDS), VULNBL_INTEL_STEPPINGS(COMETLAKE_L, X86_STEPPINGS(0x0, 0x0), MMIO | RETBLEED), - VULNBL_INTEL_STEPPINGS(COMETLAKE_L, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED), + VULNBL_INTEL_STEPPINGS(COMETLAKE_L, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED | GDS), + VULNBL_INTEL_STEPPINGS(TIGERLAKE_L, X86_STEPPING_ANY, GDS), + VULNBL_INTEL_STEPPINGS(TIGERLAKE, X86_STEPPING_ANY, GDS), VULNBL_INTEL_STEPPINGS(LAKEFIELD, X86_STEPPING_ANY, MMIO | MMIO_SBDS | RETBLEED), - VULNBL_INTEL_STEPPINGS(ROCKETLAKE, X86_STEPPING_ANY, MMIO | RETBLEED), + VULNBL_INTEL_STEPPINGS(ROCKETLAKE, X86_STEPPING_ANY, MMIO | RETBLEED | GDS), VULNBL_INTEL_STEPPINGS(ATOM_TREMONT, X86_STEPPING_ANY, MMIO | MMIO_SBDS), VULNBL_INTEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPING_ANY, MMIO), VULNBL_INTEL_STEPPINGS(ATOM_TREMONT_L, X86_STEPPING_ANY, MMIO | MMIO_SBDS), @@ -1406,6 +1410,16 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c) if (cpu_matches(cpu_vuln_blacklist, SMT_RSB)) setup_force_cpu_bug(X86_BUG_SMT_RSB); + /* + * Check if CPU is vulnerable to GDS. If running in a virtual machine on + * an affected processor, the VMM may have disabled the use of GATHER by + * disabling AVX2. The only way to do this in HW is to clear XCR0[2], + * which means that AVX will be disabled. + */ + if (cpu_matches(cpu_vuln_blacklist, GDS) && !(ia32_cap & ARCH_CAP_GDS_NO) && + boot_cpu_has(X86_FEATURE_AVX)) + setup_force_cpu_bug(X86_BUG_GDS); + if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN)) return; @@ -1962,6 +1976,8 @@ void identify_secondary_cpu(struct cpuinfo_x86 *c) validate_apic_and_package_id(c); x86_spec_ctrl_setup_ap(); update_srbds_msr(); + if (boot_cpu_has_bug(X86_BUG_GDS)) + update_gds_msr(); tsx_ap_init(); } diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 1c44630d4789..1dcd7d4e38ef 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -83,6 +83,7 @@ void cpu_select_mitigations(void); extern void x86_spec_ctrl_setup_ap(void); extern void update_srbds_msr(void); +extern void update_gds_msr(void); extern enum spectre_v2_mitigation spectre_v2_enabled; diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index c1815b9dae68..0469c09e8a8c 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -577,6 +577,12 @@ ssize_t __weak cpu_show_retbleed(struct device *dev, return sysfs_emit(buf, "Not affected\n"); } +ssize_t __weak cpu_show_gds(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sysfs_emit(buf, "Not affected\n"); +} + static DEVICE_ATTR(meltdown, 0444, cpu_show_meltdown, NULL); static DEVICE_ATTR(spectre_v1, 0444, cpu_show_spectre_v1, NULL); static DEVICE_ATTR(spectre_v2, 0444, cpu_show_spectre_v2, NULL); @@ -588,6 +594,7 @@ static DEVICE_ATTR(itlb_multihit, 0444, cpu_show_itlb_multihit, NULL); static DEVICE_ATTR(srbds, 0444, cpu_show_srbds, NULL); static DEVICE_ATTR(mmio_stale_data, 0444, cpu_show_mmio_stale_data, NULL); static DEVICE_ATTR(retbleed, 0444, cpu_show_retbleed, NULL); +static DEVICE_ATTR(gather_data_sampling, 0444, cpu_show_gds, NULL); static struct attribute *cpu_root_vulnerabilities_attrs[] = { &dev_attr_meltdown.attr, @@ -601,6 +608,7 @@ static struct attribute *cpu_root_vulnerabilities_attrs[] = { &dev_attr_srbds.attr, &dev_attr_mmio_stale_data.attr, &dev_attr_retbleed.attr, + &dev_attr_gather_data_sampling.attr, NULL }; -- cgit v1.2.3 From 80b6051085c5fedcb1dfd7b2562a63a83655c4d8 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Wed, 5 Jul 2023 10:40:01 +0800 Subject: scsi: sg: Fix checking return value of blk_get_queue() Commit fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") make a mess how blk_get_queue() is called, blk_get_queue() returns true on success while the caller expects it returns 0 on success. Fix this problem and also add a corresponding error message on failure. Fixes: fcaa174a9c99 ("scsi/sg: don't grab scsi host module reference") Reported-by: Marc Hartmayer Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/ Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com Tested-by: Shin'ichiro Kawasaki Tested-by: Marc Hartmayer Reviewed-by: Christoph Hellwig Reviewed-by: Marc Hartmayer Signed-off-by: Martin K. Petersen --- drivers/scsi/sg.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 89fa046c7158..0d8afffd1683 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1497,9 +1497,10 @@ sg_add_device(struct device *cl_dev) int error; unsigned long iflags; - error = blk_get_queue(scsidp->request_queue); - if (error) - return error; + if (!blk_get_queue(scsidp->request_queue)) { + pr_warn("%s: get scsi_device queue failed\n", __func__); + return -ENODEV; + } error = -ENOMEM; cdev = cdev_alloc(); -- cgit v1.2.3 From cf2ffdea0839398cb0551762af7f5efb0a6e0fea Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 18 Jul 2023 13:11:31 +0200 Subject: r8169: revert 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll") There have been reports that on a number of systems this change breaks network connectivity. Therefore effectively revert it. Mainly affected seem to be systems where BIOS denies ASPM access to OS. Due to later changes we can't do a direct revert. Fixes: 2ab19de62d67 ("r8169: remove ASPM restrictions now that ASPM is disabled during NAPI poll") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/e47bac0d-e802-65e1-b311-6acb26d5cf10@freenet.de/T/ Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217596 Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/57f13ec0-b216-d5d8-363d-5b05528ec5fb@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index fce4a2b908c2..8a8b7d8a5c3f 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -623,6 +623,7 @@ struct rtl8169_private { int cfg9346_usage_count; unsigned supports_gmii:1; + unsigned aspm_manageable:1; dma_addr_t counters_phys_addr; struct rtl8169_counters *counters; struct rtl8169_tc_offsets tc_offset; @@ -2746,7 +2747,8 @@ static void rtl_hw_aspm_clkreq_enable(struct rtl8169_private *tp, bool enable) if (tp->mac_version < RTL_GIGA_MAC_VER_32) return; - if (enable) { + /* Don't enable ASPM in the chip if OS can't control ASPM */ + if (enable && tp->aspm_manageable) { /* On these chip versions ASPM can even harm * bus communication of other PCI devices. */ @@ -5165,6 +5167,16 @@ done: rtl_rar_set(tp, mac_addr); } +/* register is set if system vendor successfully tested ASPM 1.2 */ +static bool rtl_aspm_is_safe(struct rtl8169_private *tp) +{ + if (tp->mac_version >= RTL_GIGA_MAC_VER_61 && + r8168_mac_ocp_read(tp, 0xc0b2) & 0xf) + return true; + + return false; +} + static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { struct rtl8169_private *tp; @@ -5234,6 +5246,19 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) xid); tp->mac_version = chipset; + /* Disable ASPM L1 as that cause random device stop working + * problems as well as full system hangs for some PCIe devices users. + * Chips from RTL8168h partially have issues with L1.2, but seem + * to work fine with L1 and L1.1. + */ + if (rtl_aspm_is_safe(tp)) + rc = 0; + else if (tp->mac_version >= RTL_GIGA_MAC_VER_46) + rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1_2); + else + rc = pci_disable_link_state(pdev, PCIE_LINK_STATE_L1); + tp->aspm_manageable = !rc; + tp->dash_type = rtl_check_dash(tp); tp->cp_cmd = RTL_R16(tp, CPlusCmd) & CPCMD_MASK; -- cgit v1.2.3 From e31a9fedc7d8d80722b19628e66fcb5a36981780 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 18 Jul 2023 13:12:32 +0200 Subject: Revert "r8169: disable ASPM during NAPI poll" This reverts commit e1ed3e4d91112027b90c7ee61479141b3f948e6a. Turned out the change causes a performance regression. Link: https://lore.kernel.org/netdev/20230713124914.GA12924@green245/T/ Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/055c6bc2-74fa-8c67-9897-3f658abb5ae7@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 8a8b7d8a5c3f..5eb50b265c0b 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4523,10 +4523,6 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) } if (napi_schedule_prep(&tp->napi)) { - rtl_unlock_config_regs(tp); - rtl_hw_aspm_clkreq_enable(tp, false); - rtl_lock_config_regs(tp); - rtl_irq_disable(tp); __napi_schedule(&tp->napi); } @@ -4586,14 +4582,9 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) work_done = rtl_rx(dev, tp, budget); - if (work_done < budget && napi_complete_done(napi, work_done)) { + if (work_done < budget && napi_complete_done(napi, work_done)) rtl_irq_enable(tp); - rtl_unlock_config_regs(tp); - rtl_hw_aspm_clkreq_enable(tp, true); - rtl_lock_config_regs(tp); - } - return work_done; } -- cgit v1.2.3 From 9f9d4c1a2e82174a4e799ec405284a2b0de32b6a Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Wed, 19 Jul 2023 01:39:36 +0100 Subject: net: ethernet: mtk_eth_soc: always mtk_get_ib1_pkt_type entries and bind debugfs files would display wrong data on NETSYS_V2 and later because instead of using mtk_get_ib1_pkt_type the driver would use MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs. Use mtk_get_ib1_pkt_type so entries and bind records display correctly. Fixes: 03a3180e5c09e ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986") Signed-off-by: Daniel Golle Acked-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c0ae03d0182f4d27b874cbdf0059bc972c317f3c.1689727134.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c index 316fe2e70fea..1a97feca77f2 100644 --- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c +++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c @@ -98,7 +98,7 @@ mtk_ppe_debugfs_foe_show(struct seq_file *m, void *private, bool bind) acct = mtk_foe_entry_get_mib(ppe, i, NULL); - type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1); + type = mtk_get_ib1_pkt_type(ppe->eth, entry->ib1); seq_printf(m, "%05x %s %7s", i, mtk_foe_entry_state_str(state), mtk_foe_pkt_type_str(type)); -- cgit v1.2.3 From 03b89a08484a88fb9e0604cab2b3eb0c2f265c74 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:36 +0200 Subject: vgacon: switch vgacon_scrolldelta() and vgacon_restore_screen() Switch vgacon_scrolldelta() and vgacon_restore_screen() positions, so that the former is not needed to be forward-declared. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/vgacon.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index e25ba523892e..fbed2862c317 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -142,12 +142,6 @@ static inline void vga_set_mem_top(struct vc_data *c) write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2); } -static void vgacon_restore_screen(struct vc_data *c) -{ - if (c->vc_origin != c->vc_visible_origin) - vgacon_scrolldelta(c, 0); -} - static void vgacon_scrolldelta(struct vc_data *c, int lines) { vc_scrolldelta_helper(c, lines, vga_rolled_over, (void *)vga_vram_base, @@ -155,6 +149,12 @@ static void vgacon_scrolldelta(struct vc_data *c, int lines) vga_set_mem_top(c); } +static void vgacon_restore_screen(struct vc_data *c) +{ + if (c->vc_origin != c->vc_visible_origin) + vgacon_scrolldelta(c, 0); +} + static const char *vgacon_startup(void) { const char *display_desc = NULL; -- cgit v1.2.3 From 6ceed69cde8fe4a78fe50d62d7a88a5c1eed4709 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:37 +0200 Subject: vgacon: remove unneeded forward declarations Most of the forward declarations in vgacon are not needed. Drop them. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/vgacon.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index fbed2862c317..a34cdfcc10c2 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -65,16 +65,8 @@ static struct vgastate vgastate; * Interface used by the world */ -static const char *vgacon_startup(void); -static void vgacon_init(struct vc_data *c, int init); -static void vgacon_deinit(struct vc_data *c); -static void vgacon_cursor(struct vc_data *c, int mode); -static int vgacon_switch(struct vc_data *c); -static int vgacon_blank(struct vc_data *c, int blank, int mode_switch); -static void vgacon_scrolldelta(struct vc_data *c, int lines); static int vgacon_set_origin(struct vc_data *c); -static void vgacon_save_screen(struct vc_data *c); -static void vgacon_invert_region(struct vc_data *c, u16 * p, int count); + static struct uni_pagedict *vgacon_uni_pagedir; static int vgacon_refcount; -- cgit v1.2.3 From c900dc6858e87e2f2396954377ae956925b17135 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:38 +0200 Subject: vgacon: remove unused xpos from vgacon_set_cursor_size() xpos is unused, remove it. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/vgacon.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index a34cdfcc10c2..7cb15851ea56 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -437,7 +437,7 @@ static void vgacon_invert_region(struct vc_data *c, u16 * p, int count) } } -static void vgacon_set_cursor_size(int xpos, int from, int to) +static void vgacon_set_cursor_size(int from, int to) { unsigned long flags; int curs, cure; @@ -479,9 +479,9 @@ static void vgacon_cursor(struct vc_data *c, int mode) case CM_ERASE: write_vga(14, (c->vc_pos - vga_vram_base) / 2); if (vga_video_type >= VIDEO_TYPE_VGAC) - vgacon_set_cursor_size(c->state.x, 31, 30); + vgacon_set_cursor_size(31, 30); else - vgacon_set_cursor_size(c->state.x, 31, 31); + vgacon_set_cursor_size(31, 31); break; case CM_MOVE: @@ -489,8 +489,7 @@ static void vgacon_cursor(struct vc_data *c, int mode) write_vga(14, (c->vc_pos - vga_vram_base) / 2); switch (CUR_SIZE(c->vc_cursor_type)) { case CUR_UNDERLINE: - vgacon_set_cursor_size(c->state.x, - c->vc_cell_height - + vgacon_set_cursor_size(c->vc_cell_height - (c->vc_cell_height < 10 ? 2 : 3), c->vc_cell_height - @@ -498,35 +497,31 @@ static void vgacon_cursor(struct vc_data *c, int mode) 10 ? 1 : 2)); break; case CUR_TWO_THIRDS: - vgacon_set_cursor_size(c->state.x, - c->vc_cell_height / 3, + vgacon_set_cursor_size(c->vc_cell_height / 3, c->vc_cell_height - (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_THIRD: - vgacon_set_cursor_size(c->state.x, - (c->vc_cell_height * 2) / 3, + vgacon_set_cursor_size((c->vc_cell_height * 2) / 3, c->vc_cell_height - (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_HALF: - vgacon_set_cursor_size(c->state.x, - c->vc_cell_height / 2, + vgacon_set_cursor_size(c->vc_cell_height / 2, c->vc_cell_height - (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_NONE: if (vga_video_type >= VIDEO_TYPE_VGAC) - vgacon_set_cursor_size(c->state.x, 31, 30); + vgacon_set_cursor_size(31, 30); else - vgacon_set_cursor_size(c->state.x, 31, 31); + vgacon_set_cursor_size(31, 31); break; default: - vgacon_set_cursor_size(c->state.x, 1, - c->vc_cell_height); + vgacon_set_cursor_size(1, c->vc_cell_height); break; } break; -- cgit v1.2.3 From 93686f6b01df3e904569ee7265ee181d859b201d Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:39 +0200 Subject: vgacon: let vgacon_doresize() return void The return value is neither used, nor vgacon_doresize() returns an error. So change the reurn type to void. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/vgacon.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 7cb15851ea56..07f6b97d9b81 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -528,7 +528,7 @@ static void vgacon_cursor(struct vc_data *c, int mode) } } -static int vgacon_doresize(struct vc_data *c, +static void vgacon_doresize(struct vc_data *c, unsigned int width, unsigned int height) { unsigned long flags; @@ -587,7 +587,6 @@ static int vgacon_doresize(struct vc_data *c, } raw_spin_unlock_irqrestore(&vga_lock, flags); - return 0; } static int vgacon_switch(struct vc_data *c) -- cgit v1.2.3 From 1023ca1973c6253f7ba9024b2b0c27168f50ab3d Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:40 +0200 Subject: vgacon: cache vc_cell_height in vgacon_cursor() There are many places c->vc_cell_height is used in the code of vgacon_cursor(). Caching the value to a local variable makes the code much easier to follow. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/vgacon.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 07f6b97d9b81..7ad047bcae17 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -470,11 +470,15 @@ static void vgacon_set_cursor_size(int from, int to) static void vgacon_cursor(struct vc_data *c, int mode) { + unsigned int c_height; + if (c->vc_mode != KD_TEXT) return; vgacon_restore_screen(c); + c_height = c->vc_cell_height; + switch (mode) { case CM_ERASE: write_vga(14, (c->vc_pos - vga_vram_base) / 2); @@ -489,30 +493,22 @@ static void vgacon_cursor(struct vc_data *c, int mode) write_vga(14, (c->vc_pos - vga_vram_base) / 2); switch (CUR_SIZE(c->vc_cursor_type)) { case CUR_UNDERLINE: - vgacon_set_cursor_size(c->vc_cell_height - - (c->vc_cell_height < - 10 ? 2 : 3), - c->vc_cell_height - - (c->vc_cell_height < - 10 ? 1 : 2)); + vgacon_set_cursor_size(c_height - + (c_height < 10 ? 2 : 3), + c_height - + (c_height < 10 ? 1 : 2)); break; case CUR_TWO_THIRDS: - vgacon_set_cursor_size(c->vc_cell_height / 3, - c->vc_cell_height - - (c->vc_cell_height < - 10 ? 1 : 2)); + vgacon_set_cursor_size(c_height / 3, c_height - + (c_height < 10 ? 1 : 2)); break; case CUR_LOWER_THIRD: - vgacon_set_cursor_size((c->vc_cell_height * 2) / 3, - c->vc_cell_height - - (c->vc_cell_height < - 10 ? 1 : 2)); + vgacon_set_cursor_size(c_height * 2 / 3, c_height - + (c_height < 10 ? 1 : 2)); break; case CUR_LOWER_HALF: - vgacon_set_cursor_size(c->vc_cell_height / 2, - c->vc_cell_height - - (c->vc_cell_height < - 10 ? 1 : 2)); + vgacon_set_cursor_size(c_height / 2, c_height - + (c_height < 10 ? 1 : 2)); break; case CUR_NONE: if (vga_video_type >= VIDEO_TYPE_VGAC) @@ -521,7 +517,7 @@ static void vgacon_cursor(struct vc_data *c, int mode) vgacon_set_cursor_size(31, 31); break; default: - vgacon_set_cursor_size(1, c->vc_cell_height); + vgacon_set_cursor_size(1, c_height); break; } break; -- cgit v1.2.3 From 4f2ba39a40480e6019133730f1741fdbb7137290 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:41 +0200 Subject: sticon: make sticon_set_def_font() void and remove op parameter sticon_set_def_font() always returns 0, so make it void. And remove an unused 'op' parameter. Signed-off-by: "Jiri Slaby (SUSE)" Cc: "James E.J. Bottomley" Cc: Helge Deller Cc: linux-parisc@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/console/sticon.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c index d11cfd2d68b5..992a4fa431aa 100644 --- a/drivers/video/console/sticon.c +++ b/drivers/video/console/sticon.c @@ -156,7 +156,7 @@ static bool sticon_scroll(struct vc_data *conp, unsigned int t, return false; } -static int sticon_set_def_font(int unit, struct console_font *op) +static void sticon_set_def_font(int unit) { if (font_data[unit] != STI_DEF_FONT) { if (--FNTREFCOUNT(font_data[unit]) == 0) { @@ -165,8 +165,6 @@ static int sticon_set_def_font(int unit, struct console_font *op) } font_data[unit] = STI_DEF_FONT; } - - return 0; } static int sticon_set_font(struct vc_data *vc, struct console_font *op, @@ -246,7 +244,7 @@ static int sticon_set_font(struct vc_data *vc, struct console_font *op, vc->vc_video_erase_char, font_data[vc->vc_num]); /* delete old font in case it is a user font */ - sticon_set_def_font(unit, NULL); + sticon_set_def_font(unit); FNTREFCOUNT(cooked_font)++; font_data[unit] = cooked_font; @@ -264,7 +262,9 @@ static int sticon_set_font(struct vc_data *vc, struct console_font *op, static int sticon_font_default(struct vc_data *vc, struct console_font *op, char *name) { - return sticon_set_def_font(vc->vc_num, op); + sticon_set_def_font(vc->vc_num); + + return 0; } static int sticon_font_set(struct vc_data *vc, struct console_font *font, @@ -297,7 +297,7 @@ static void sticon_deinit(struct vc_data *c) /* free memory used by user font */ for (i = 0; i < MAX_NR_CONSOLES; i++) - sticon_set_def_font(i, NULL); + sticon_set_def_font(i); } static void sticon_clear(struct vc_data *conp, int sy, int sx, int height, -- cgit v1.2.3 From 933ab3a81cb73d08bc6b4eadeb3a98c9194abdf5 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Wed, 12 Jul 2023 10:59:42 +0200 Subject: fbcon: remove unused display (p) from fbcon_redraw() The parameter is unused. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Daniel Vetter Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller --- drivers/video/fbdev/core/fbcon.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c index c6c9d040bdec..887fad44e7ec 100644 --- a/drivers/video/fbdev/core/fbcon.c +++ b/drivers/video/fbdev/core/fbcon.c @@ -1612,8 +1612,7 @@ static void fbcon_redraw_blit(struct vc_data *vc, struct fb_info *info, } } -static void fbcon_redraw(struct vc_data *vc, struct fbcon_display *p, - int line, int count, int offset) +static void fbcon_redraw(struct vc_data *vc, int line, int count, int offset) { unsigned short *d = (unsigned short *) (vc->vc_origin + vc->vc_size_row * line); @@ -1827,7 +1826,7 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b, case SCROLL_REDRAW: redraw_up: - fbcon_redraw(vc, p, t, b - t - count, + fbcon_redraw(vc, t, b - t - count, count * vc->vc_cols); fbcon_clear(vc, b - count, 0, count, vc->vc_cols); scr_memsetw((unsigned short *) (vc->vc_origin + @@ -1913,7 +1912,7 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b, case SCROLL_REDRAW: redraw_down: - fbcon_redraw(vc, p, b - 1, b - t - count, + fbcon_redraw(vc, b - 1, b - t - count, -count * vc->vc_cols); fbcon_clear(vc, t, 0, count, vc->vc_cols); scr_memsetw((unsigned short *) (vc->vc_origin + -- cgit v1.2.3 From 298e082558d86aa904486d087ce45d35c1122f1e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 12 Jul 2023 17:11:23 +0100 Subject: fbdev: kyro: make some const read-only arrays static and reduce type size Don't populate the const read-only arrays on the stack but instead make them static const. Use smaller types to use less storage for the arrays. Also makes the object code a little smaller. Signed-off-by: Colin Ian King Signed-off-by: Helge Deller --- drivers/video/fbdev/kyro/STG4000InitDevice.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/kyro/STG4000InitDevice.c b/drivers/video/fbdev/kyro/STG4000InitDevice.c index edfa0a04854d..79886a246638 100644 --- a/drivers/video/fbdev/kyro/STG4000InitDevice.c +++ b/drivers/video/fbdev/kyro/STG4000InitDevice.c @@ -83,11 +83,11 @@ volatile u32 i,count=0; \ static u32 InitSDRAMRegisters(volatile STG4000REG __iomem *pSTGReg, u32 dwSubSysID, u32 dwRevID) { - u32 adwSDRAMArgCfg0[] = { 0xa0, 0x80, 0xa0, 0xa0, 0xa0 }; - u32 adwSDRAMCfg1[] = { 0x8732, 0x8732, 0xa732, 0xa732, 0x8732 }; - u32 adwSDRAMCfg2[] = { 0x87d2, 0x87d2, 0xa7d2, 0x87d2, 0xa7d2 }; - u32 adwSDRAMRsh[] = { 36, 39, 40 }; - u32 adwChipSpeed[] = { 110, 120, 125 }; + static const u8 adwSDRAMArgCfg0[] = { 0xa0, 0x80, 0xa0, 0xa0, 0xa0 }; + static const u16 adwSDRAMCfg1[] = { 0x8732, 0x8732, 0xa732, 0xa732, 0x8732 }; + static const u16 adwSDRAMCfg2[] = { 0x87d2, 0x87d2, 0xa7d2, 0x87d2, 0xa7d2 }; + static const u8 adwSDRAMRsh[] = { 36, 39, 40 }; + static const u8 adwChipSpeed[] = { 110, 120, 125 }; u32 dwMemTypeIdx; u32 dwChipSpeedIdx; -- cgit v1.2.3 From 4e88761f5f8c7869f15a2046b1a1116f4fab4ac8 Mon Sep 17 00:00:00 2001 From: Zhang Shurong Date: Sat, 15 Jul 2023 16:16:56 +0800 Subject: fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe This func misses checking for platform_get_irq()'s call and may passes the negative error codes to request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Fix this by stop calling request_irq() with invalid IRQ #s. Fixes: 1630d85a8312 ("au1200fb: fix hardcoded IRQ") Signed-off-by: Zhang Shurong Signed-off-by: Helge Deller --- drivers/video/fbdev/au1200fb.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c index 5c232eb13724..c137d6afe484 100644 --- a/drivers/video/fbdev/au1200fb.c +++ b/drivers/video/fbdev/au1200fb.c @@ -1732,6 +1732,9 @@ static int au1200fb_drv_probe(struct platform_device *dev) /* Now hook interrupt too */ irq = platform_get_irq(dev, 0); + if (irq < 0) + return irq; + ret = request_irq(irq, au1200fb_handle_irq, IRQF_SHARED, "lcd", (void *)dev); if (ret) { -- cgit v1.2.3 From 9d5651ad2ae7b2ddfc56ff243a08937d9681f950 Mon Sep 17 00:00:00 2001 From: Yuanjun Gong Date: Mon, 17 Jul 2023 22:48:09 +0800 Subject: fbdev: ep93xx-fb: fix return value check in ep93xxfb_probe function clk_prepare_enable may fail in ep93xxfb_probe, therefore, add a return value check to clk_prepare_enable and handle the error. Signed-off-by: Yuanjun Gong Signed-off-by: Helge Deller --- drivers/video/fbdev/ep93xx-fb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c index 94fe52928be2..22158d9ca8dd 100644 --- a/drivers/video/fbdev/ep93xx-fb.c +++ b/drivers/video/fbdev/ep93xx-fb.c @@ -548,7 +548,9 @@ static int ep93xxfb_probe(struct platform_device *pdev) } ep93xxfb_set_par(info); - clk_prepare_enable(fbi->clk); + err = clk_prepare_enable(fbi->clk); + if (err) + goto failed_check; err = register_framebuffer(info); if (err) -- cgit v1.2.3 From e8812acb5bf724f2fc23a500e590c776ebda7b0a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 18 Jul 2023 08:32:26 -0600 Subject: fbdev: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Reviewed-by: Thomas Zimmermann Signed-off-by: Rob Herring Signed-off-by: Helge Deller --- drivers/video/fbdev/bw2.c | 3 ++- drivers/video/fbdev/cg14.c | 3 ++- drivers/video/fbdev/cg3.c | 3 ++- drivers/video/fbdev/cg6.c | 3 ++- drivers/video/fbdev/ffb.c | 3 ++- drivers/video/fbdev/grvga.c | 3 +-- drivers/video/fbdev/leo.c | 3 ++- drivers/video/fbdev/mb862xx/mb862xxfb_accel.c | 4 +--- drivers/video/fbdev/mb862xx/mb862xxfbdrv.c | 6 +++--- drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 2 +- drivers/video/fbdev/p9100.c | 3 ++- drivers/video/fbdev/platinumfb.c | 4 ++-- drivers/video/fbdev/sbuslib.c | 2 +- drivers/video/fbdev/sunxvr1000.c | 3 ++- drivers/video/fbdev/sunxvr2500.c | 2 +- drivers/video/fbdev/sunxvr500.c | 2 +- drivers/video/fbdev/tcx.c | 3 ++- drivers/video/fbdev/xilinxfb.c | 5 ++--- 18 files changed, 31 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/video/fbdev/bw2.c b/drivers/video/fbdev/bw2.c index 025d663dc6fd..39f438de0d6b 100644 --- a/drivers/video/fbdev/bw2.c +++ b/drivers/video/fbdev/bw2.c @@ -17,7 +17,8 @@ #include #include #include -#include +#include +#include #include #include diff --git a/drivers/video/fbdev/cg14.c b/drivers/video/fbdev/cg14.c index 832a82f45c80..90fdc9d9bf5a 100644 --- a/drivers/video/fbdev/cg14.c +++ b/drivers/video/fbdev/cg14.c @@ -17,7 +17,8 @@ #include #include #include -#include +#include +#include #include #include diff --git a/drivers/video/fbdev/cg3.c b/drivers/video/fbdev/cg3.c index 6335cd364c74..98c60f72046a 100644 --- a/drivers/video/fbdev/cg3.c +++ b/drivers/video/fbdev/cg3.c @@ -17,7 +17,8 @@ #include #include #include -#include +#include +#include #include #include diff --git a/drivers/video/fbdev/cg6.c b/drivers/video/fbdev/cg6.c index 6884572efea1..6427b85f1a94 100644 --- a/drivers/video/fbdev/cg6.c +++ b/drivers/video/fbdev/cg6.c @@ -17,7 +17,8 @@ #include #include #include -#include +#include +#include #include #include diff --git a/drivers/video/fbdev/ffb.c b/drivers/video/fbdev/ffb.c index c6d3111dcbb0..c473841eb6ff 100644 --- a/drivers/video/fbdev/ffb.c +++ b/drivers/video/fbdev/ffb.c @@ -16,7 +16,8 @@ #include #include #include -#include +#include +#include #include #include diff --git a/drivers/video/fbdev/grvga.c b/drivers/video/fbdev/grvga.c index 9aa15be29ea9..d4a9a58b3691 100644 --- a/drivers/video/fbdev/grvga.c +++ b/drivers/video/fbdev/grvga.c @@ -12,8 +12,7 @@ #include #include -#include -#include +#include #include #include #include diff --git a/drivers/video/fbdev/leo.c b/drivers/video/fbdev/leo.c index 3ffc0a725f89..89ca48235dbe 100644 --- a/drivers/video/fbdev/leo.c +++ b/drivers/video/fbdev/leo.c @@ -16,8 +16,9 @@ #include #include #include -#include #include +#include +#include #include diff --git a/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c index 61aed7fc0b8d..c35a7479fbf2 100644 --- a/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c +++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c @@ -15,9 +15,7 @@ #include #include #include -#if defined(CONFIG_OF) -#include -#endif + #include "mb862xxfb.h" #include "mb862xx_reg.h" #include "mb862xxfb_accel.h" diff --git a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c index b5c8fcab9940..9dc347d163cf 100644 --- a/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c +++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c @@ -18,11 +18,11 @@ #include #include #include -#if defined(CONFIG_OF) +#include #include #include -#include -#endif +#include + #include "mb862xxfb.h" #include "mb862xx_reg.h" diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c index ba94a0a7bd4f..77fce1223a64 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c @@ -15,12 +15,12 @@ #include #include #include +#include #include #include #include #include #include -#include #include