From f2148a472883ddf77626fff52b070655a8a0a788 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 May 2011 20:43:09 -0700 Subject: via-*: Move the VIA drivers Move the VIA drivers into drivers/net/ethernet/via/ and make the necessary Kconfig and Makefile changes. CC: Roger Luethi CC: Francois Romieu Signed-off-by: Jeff Kirsher --- drivers/net/Kconfig | 36 - drivers/net/Makefile | 2 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/via/Kconfig | 56 + drivers/net/ethernet/via/Makefile | 6 + drivers/net/ethernet/via/via-rhine.c | 2340 ++++++++++++++++++++ drivers/net/ethernet/via/via-velocity.c | 3592 +++++++++++++++++++++++++++++++ drivers/net/ethernet/via/via-velocity.h | 1579 ++++++++++++++ drivers/net/via-rhine.c | 2340 -------------------- drivers/net/via-velocity.c | 3592 ------------------------------- drivers/net/via-velocity.h | 1579 -------------- 12 files changed, 7575 insertions(+), 7549 deletions(-) create mode 100644 drivers/net/ethernet/via/Kconfig create mode 100644 drivers/net/ethernet/via/Makefile create mode 100644 drivers/net/ethernet/via/via-rhine.c create mode 100644 drivers/net/ethernet/via/via-velocity.c create mode 100644 drivers/net/ethernet/via/via-velocity.h delete mode 100644 drivers/net/via-rhine.c delete mode 100644 drivers/net/via-velocity.c delete mode 100644 drivers/net/via-velocity.h (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index cb6c6947b320..c1e491add8f9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -614,30 +614,6 @@ config KS8851_MLL This platform driver is for Micrel KS8851 Address/data bus multiplexed network chip. -config VIA_RHINE - tristate "VIA Rhine support" - depends on NET_PCI && PCI - select CRC32 - select MII - help - If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), - Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type - Ethernet functions can also be found integrated on South Bridges - (e.g. VT8235). - - To compile this driver as a module, choose M here. The module - will be called via-rhine. - -config VIA_RHINE_MMIO - bool "Use MMIO instead of PIO" - depends on VIA_RHINE - help - This instructs the driver to use PCI shared memory (MMIO) instead of - programmed I/O ports (PIO). Enabling this gives an improvement in - processing time in parts of the driver. - - If unsure, say Y. - config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" depends on NET_ETHERNET && EXPERIMENTAL && AR7 @@ -793,18 +769,6 @@ config SIS190 To compile this driver as a module, choose M here: the module will be called sis190. This is recommended. -config VIA_VELOCITY - tristate "VIA Velocity support" - depends on PCI - select CRC32 - select CRC_CCITT - select MII - help - If you have a VIA "Velocity" based network card say Y here. - - To compile this driver as a module, choose M here. The module - will be called via-velocity. - config SPIDER_NET tristate "Spider Gigabit Ethernet driver" depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 69ca6a009c59..7e1128fd62bd 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,8 +51,6 @@ obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_KSZ884X_PCI) += ksz884x.o -obj-$(CONFIG_VIA_RHINE) += via-rhine.o -obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 1c447d96d7e5..bdc0df873daf 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -45,5 +45,6 @@ source "drivers/net/ethernet/smsc/Kconfig" source "drivers/net/ethernet/stmicro/Kconfig" source "drivers/net/ethernet/sun/Kconfig" source "drivers/net/ethernet/tehuti/Kconfig" +source "drivers/net/ethernet/via/Kconfig" endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 48c8656b96c2..ac60ac9026bb 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -36,3 +36,4 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/ obj-$(CONFIG_NET_VENDOR_SUN) += sun/ obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/ +obj-$(CONFIG_NET_VENDOR_VIA) += via/ diff --git a/drivers/net/ethernet/via/Kconfig b/drivers/net/ethernet/via/Kconfig new file mode 100644 index 000000000000..7199194fa898 --- /dev/null +++ b/drivers/net/ethernet/via/Kconfig @@ -0,0 +1,56 @@ +# +# VIA device configuration +# + +config NET_VENDOR_VIA + bool "VIA devices" + depends on PCI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about VIA devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_VIA + +config VIA_RHINE + tristate "VIA Rhine support" + depends on PCI + select CRC32 + select MII + ---help--- + If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), + Rhine-II (VT6102), or Rhine-III (VT6105)), say Y here. Rhine-type + Ethernet functions can also be found integrated on South Bridges + (e.g. VT8235). + + To compile this driver as a module, choose M here. The module + will be called via-rhine. + +config VIA_RHINE_MMIO + bool "Use MMIO instead of PIO" + depends on VIA_RHINE + ---help--- + This instructs the driver to use PCI shared memory (MMIO) instead of + programmed I/O ports (PIO). Enabling this gives an improvement in + processing time in parts of the driver. + + If unsure, say Y. + +config VIA_VELOCITY + tristate "VIA Velocity support" + depends on PCI + select CRC32 + select CRC_CCITT + select MII + ---help--- + If you have a VIA "Velocity" based network card say Y here. + + To compile this driver as a module, choose M here. The module + will be called via-velocity. + +endif # NET_VENDOR_VIA diff --git a/drivers/net/ethernet/via/Makefile b/drivers/net/ethernet/via/Makefile new file mode 100644 index 000000000000..46c5d4a3d8f1 --- /dev/null +++ b/drivers/net/ethernet/via/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the VIA device drivers. +# + +obj-$(CONFIG_VIA_RHINE) += via-rhine.o +obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c new file mode 100644 index 000000000000..7f23ab913fd9 --- /dev/null +++ b/drivers/net/ethernet/via/via-rhine.c @@ -0,0 +1,2340 @@ +/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */ +/* + Written 1998-2001 by Donald Becker. + + Current Maintainer: Roger Luethi + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + This driver is designed for the VIA VT86C100A Rhine-I. + It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM + and management NIC 6105M). + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + + This driver contains some changes from the original Donald Becker + version. He may or may not be interested in bug reports on this + code. You can find his versions at: + http://www.scyld.com/network/via-rhine.html + [link no longer provides useful info -jgarzik] + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "via-rhine" +#define DRV_VERSION "1.5.0" +#define DRV_RELDATE "2010-10-09" + + +/* A few user-configurable values. + These may be modified when a driver module is loaded. */ + +#define DEBUG +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +static int max_interrupt_work = 20; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. */ +#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ + defined(CONFIG_SPARC) || defined(__ia64__) || \ + defined(__sh__) || defined(__mips__) +static int rx_copybreak = 1518; +#else +static int rx_copybreak; +#endif + +/* Work-around for broken BIOSes: they are unable to get the chip back out of + power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ +static int avoid_D3; + +/* + * In case you are looking for 'options[]' or 'full_duplex[]', they + * are gone. Use ethtool(8) instead. + */ + +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + The Rhine has a 64 element 8390-like hash table. */ +static const int multicast_filter_limit = 32; + + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert '%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority. + There are no ill effects from too-large receive rings. */ +#define TX_RING_SIZE 16 +#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ +#define RX_RING_SIZE 64 + +/* Operational parameters that usually are not changed. */ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* Processor type for cache alignment. */ +#include +#include +#include +#include + +/* These identify the driver base version and may not be removed. */ +static const char version[] __devinitconst = + "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker"; + +/* This driver was written to use PCI memory space. Some early versions + of the Rhine may only work correctly with I/O space accesses. */ +#ifdef CONFIG_VIA_RHINE_MMIO +#define USE_MMIO +#else +#endif + +MODULE_AUTHOR("Donald Becker "); +MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(max_interrupt_work, int, 0); +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param(avoid_D3, bool, 0); +MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); +MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); +MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); + +#define MCAM_SIZE 32 +#define VCAM_SIZE 32 + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet +controller. + +II. Board-specific settings + +Boards with this chip are functional only in a bus-master PCI slot. + +Many operational settings are loaded from the EEPROM to the Config word at +offset 0x78. For most of these settings, this driver assumes that they are +correct. +If this driver is compiled to use PCI memory space operations the EEPROM +must be configured to enable memory ops. + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. + +IIIb/c. Transmit/Receive Structure + +This driver attempts to use a zero-copy receive and transmit scheme. + +Alas, all data buffers are required to start on a 32 bit boundary, so +the driver must often copy transmit packets into bounce buffers. + +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in the last phase of rhine_rx(). + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +Since the VIA chips are only able to transfer data to buffers on 32 bit +boundaries, the IP header at offset 14 in an ethernet frame isn't +longword aligned for further processing. Copying these unaligned buffers +has the beneficial effect of 16-byte aligning the IP header. + +IIId. Synchronization + +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler, +which is single threaded by the hardware and interrupt handling software. + +The send packet thread has partial control over the Tx ring. It locks the +netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in +the ring is not available it stops the transmit queue by +calling netif_stop_queue. + +The interrupt handler has exclusive control over the Rx ring and records stats +from the Tx ring. After reaping the stats, it marks the Tx queue entry as +empty by incrementing the dirty_tx mark. If at least half of the entries in +the Rx ring are available the transmit queue is woken up if it was stopped. + +IV. Notes + +IVb. References + +Preliminary VT86C100A manual from http://www.via.com.tw/ +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html +ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf +ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF + + +IVc. Errata + +The VT86C100A manual is not reliable information. +The 3043 chip does not handle unaligned transmit or receive buffers, resulting +in significant performance degradation for bounce buffer copies on transmit +and unaligned IP headers on receive. +The chip does not pad to minimum transmit length. + +*/ + + +/* This table drives the PCI probe routines. It's mostly boilerplate in all + of the drivers, and will likely be provided by some future kernel. + Note the matching code -- the first table entry matchs all 56** cards but + second only the 1234 card. +*/ + +enum rhine_revs { + VT86C100A = 0x00, + VTunknown0 = 0x20, + VT6102 = 0x40, + VT8231 = 0x50, /* Integrated MAC */ + VT8233 = 0x60, /* Integrated MAC */ + VT8235 = 0x74, /* Integrated MAC */ + VT8237 = 0x78, /* Integrated MAC */ + VTunknown1 = 0x7C, + VT6105 = 0x80, + VT6105_B0 = 0x83, + VT6105L = 0x8A, + VT6107 = 0x8C, + VTunknown2 = 0x8E, + VT6105M = 0x90, /* Management adapter */ +}; + +enum rhine_quirks { + rqWOL = 0x0001, /* Wake-On-LAN support */ + rqForceReset = 0x0002, + rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */ + rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */ + rqRhineI = 0x0100, /* See comment below */ +}; +/* + * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable + * MMIO as well as for the collision counter and the Tx FIFO underflow + * indicator. In addition, Tx and Rx buffers need to 4 byte aligned. + */ + +/* Beware of PCI posted writes */ +#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) + +static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = { + { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ + { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ + { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ + { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ + { } /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); + + +/* Offsets to the device registers. */ +enum register_offsets { + StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08, + ChipCmd1=0x09, TQWake=0x0A, + IntrStatus=0x0C, IntrEnable=0x0E, + MulticastFilter0=0x10, MulticastFilter1=0x14, + RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54, + MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F, + MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74, + ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B, + RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81, + StickyHW=0x83, IntrStatus2=0x84, + CamMask=0x88, CamCon=0x92, CamAddr=0x93, + WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4, + WOLcrClr1=0xA6, WOLcgClr=0xA7, + PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD, +}; + +/* Bits in ConfigD */ +enum backoff_bits { + BackOptional=0x01, BackModify=0x02, + BackCaptureEffect=0x04, BackRandom=0x08 +}; + +/* Bits in the TxConfig (TCR) register */ +enum tcr_bits { + TCR_PQEN=0x01, + TCR_LB0=0x02, /* loopback[0] */ + TCR_LB1=0x04, /* loopback[1] */ + TCR_OFSET=0x08, + TCR_RTGOPT=0x10, + TCR_RTFT0=0x20, + TCR_RTFT1=0x40, + TCR_RTSF=0x80, +}; + +/* Bits in the CamCon (CAMC) register */ +enum camcon_bits { + CAMC_CAMEN=0x01, + CAMC_VCAMSL=0x02, + CAMC_CAMWR=0x04, + CAMC_CAMRD=0x08, +}; + +/* Bits in the PCIBusConfig1 (BCR1) register */ +enum bcr1_bits { + BCR1_POT0=0x01, + BCR1_POT1=0x02, + BCR1_POT2=0x04, + BCR1_CTFT0=0x08, + BCR1_CTFT1=0x10, + BCR1_CTSF=0x20, + BCR1_TXQNOBK=0x40, /* for VT6105 */ + BCR1_VIDFR=0x80, /* for VT6105 */ + BCR1_MED0=0x40, /* for VT6102 */ + BCR1_MED1=0x80, /* for VT6102 */ +}; + +#ifdef USE_MMIO +/* Registers we check that mmio and reg are the same. */ +static const int mmio_verify_registers[] = { + RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD, + 0 +}; +#endif + +/* Bits in the interrupt status/mask registers. */ +enum intr_status_bits { + IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020, + IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210, + IntrPCIErr=0x0040, + IntrStatsMax=0x0080, IntrRxEarly=0x0100, + IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000, + IntrTxAborted=0x2000, IntrLinkChange=0x4000, + IntrRxWakeUp=0x8000, + IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260, + IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */ + IntrTxErrSummary=0x082218, +}; + +/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */ +enum wol_bits { + WOLucast = 0x10, + WOLmagic = 0x20, + WOLbmcast = 0x30, + WOLlnkon = 0x40, + WOLlnkoff = 0x80, +}; + +/* The Rx and Tx buffer descriptors. */ +struct rx_desc { + __le32 rx_status; + __le32 desc_length; /* Chain flag, Buffer/frame length */ + __le32 addr; + __le32 next_desc; +}; +struct tx_desc { + __le32 tx_status; + __le32 desc_length; /* Chain flag, Tx Config, Frame length */ + __le32 addr; + __le32 next_desc; +}; + +/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */ +#define TXDESC 0x00e08000 + +enum rx_status_bits { + RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F +}; + +/* Bits in *_desc.*_status */ +enum desc_status_bits { + DescOwn=0x80000000 +}; + +/* Bits in *_desc.*_length */ +enum desc_length_bits { + DescTag=0x00010000 +}; + +/* Bits in ChipCmd. */ +enum chip_cmd_bits { + CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08, + CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40, + Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04, + Cmd1NoTxPoll=0x08, Cmd1Reset=0x80, +}; + +struct rhine_private { + /* Bit mask for configured VLAN ids */ + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + + /* Descriptor rings */ + struct rx_desc *rx_ring; + struct tx_desc *tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + + /* The addresses of receive-in-place skbuffs. */ + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + dma_addr_t rx_skbuff_dma[RX_RING_SIZE]; + + /* The saved address of a sent-in-place packet/buffer, for later free(). */ + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + dma_addr_t tx_skbuff_dma[TX_RING_SIZE]; + + /* Tx bounce buffers (Rhine-I only) */ + unsigned char *tx_buf[TX_RING_SIZE]; + unsigned char *tx_bufs; + dma_addr_t tx_bufs_dma; + + struct pci_dev *pdev; + long pioaddr; + struct net_device *dev; + struct napi_struct napi; + spinlock_t lock; + struct work_struct reset_task; + + /* Frequently used values: keep some adjacent for cache effect. */ + u32 quirks; + struct rx_desc *rx_head_desc; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int cur_tx, dirty_tx; + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + u8 wolopts; + + u8 tx_thresh, rx_thresh; + + struct mii_if_info mii_if; + void __iomem *base; +}; + +#define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0) +#define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0) +#define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0) + +#define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x)) +#define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x)) +#define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x)) + +#define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0) +#define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0) +#define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0) + +#define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0) +#define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0) +#define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0) + + +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *dev, int phy_id, int location, int value); +static int rhine_open(struct net_device *dev); +static void rhine_reset_task(struct work_struct *work); +static void rhine_tx_timeout(struct net_device *dev); +static netdev_tx_t rhine_start_tx(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t rhine_interrupt(int irq, void *dev_instance); +static void rhine_tx(struct net_device *dev); +static int rhine_rx(struct net_device *dev, int limit); +static void rhine_error(struct net_device *dev, int intr_status); +static void rhine_set_rx_mode(struct net_device *dev); +static struct net_device_stats *rhine_get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static const struct ethtool_ops netdev_ethtool_ops; +static int rhine_close(struct net_device *dev); +static void rhine_shutdown (struct pci_dev *pdev); +static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); +static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); +static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr); +static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr); +static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask); +static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask); +static void rhine_init_cam_filter(struct net_device *dev); +static void rhine_update_vcam(struct net_device *dev); + +#define RHINE_WAIT_FOR(condition) \ +do { \ + int i = 1024; \ + while (!(condition) && --i) \ + ; \ + if (debug > 1 && i < 512) \ + pr_info("%4d cycles used @ %s:%d\n", \ + 1024 - i, __func__, __LINE__); \ +} while (0) + +static inline u32 get_intr_status(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + u32 intr_status; + + intr_status = ioread16(ioaddr + IntrStatus); + /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */ + if (rp->quirks & rqStatusWBRace) + intr_status |= ioread8(ioaddr + IntrStatus2) << 16; + return intr_status; +} + +/* + * Get power related registers into sane state. + * Notify user about past WOL event. + */ +static void rhine_power_init(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + u16 wolstat; + + if (rp->quirks & rqWOL) { + /* Make sure chip is in power state D0 */ + iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW); + + /* Disable "force PME-enable" */ + iowrite8(0x80, ioaddr + WOLcgClr); + + /* Clear power-event config bits (WOL) */ + iowrite8(0xFF, ioaddr + WOLcrClr); + /* More recent cards can manage two additional patterns */ + if (rp->quirks & rq6patterns) + iowrite8(0x03, ioaddr + WOLcrClr1); + + /* Save power-event status bits */ + wolstat = ioread8(ioaddr + PwrcsrSet); + if (rp->quirks & rq6patterns) + wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8; + + /* Clear power-event status bits */ + iowrite8(0xFF, ioaddr + PwrcsrClr); + if (rp->quirks & rq6patterns) + iowrite8(0x03, ioaddr + PwrcsrClr1); + + if (wolstat) { + char *reason; + switch (wolstat) { + case WOLmagic: + reason = "Magic packet"; + break; + case WOLlnkon: + reason = "Link went up"; + break; + case WOLlnkoff: + reason = "Link went down"; + break; + case WOLucast: + reason = "Unicast packet"; + break; + case WOLbmcast: + reason = "Multicast/broadcast packet"; + break; + default: + reason = "Unknown"; + } + netdev_info(dev, "Woke system up. Reason: %s\n", + reason); + } + } +} + +static void rhine_chip_reset(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + iowrite8(Cmd1Reset, ioaddr + ChipCmd1); + IOSYNC; + + if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) { + netdev_info(dev, "Reset not complete yet. Trying harder.\n"); + + /* Force reset */ + if (rp->quirks & rqForceReset) + iowrite8(0x40, ioaddr + MiscCmd); + + /* Reset can take somewhat longer (rare) */ + RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset)); + } + + if (debug > 1) + netdev_info(dev, "Reset %s\n", + (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ? + "failed" : "succeeded"); +} + +#ifdef USE_MMIO +static void enable_mmio(long pioaddr, u32 quirks) +{ + int n; + if (quirks & rqRhineI) { + /* More recent docs say that this bit is reserved ... */ + n = inb(pioaddr + ConfigA) | 0x20; + outb(n, pioaddr + ConfigA); + } else { + n = inb(pioaddr + ConfigD) | 0x80; + outb(n, pioaddr + ConfigD); + } +} +#endif + +/* + * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM + * (plus 0x6C for Rhine-I/II) + */ +static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + outb(0x20, pioaddr + MACRegEEcsr); + RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20)); + +#ifdef USE_MMIO + /* + * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable + * MMIO. If reloading EEPROM was done first this could be avoided, but + * it is not known if that still works with the "win98-reboot" problem. + */ + enable_mmio(pioaddr, rp->quirks); +#endif + + /* Turn off EEPROM-controlled wake-up (magic packet) */ + if (rp->quirks & rqWOL) + iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA); + +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void rhine_poll(struct net_device *dev) +{ + disable_irq(dev->irq); + rhine_interrupt(dev->irq, (void *)dev); + enable_irq(dev->irq); +} +#endif + +static int rhine_napipoll(struct napi_struct *napi, int budget) +{ + struct rhine_private *rp = container_of(napi, struct rhine_private, napi); + struct net_device *dev = rp->dev; + void __iomem *ioaddr = rp->base; + int work_done; + + work_done = rhine_rx(dev, budget); + + if (work_done < budget) { + napi_complete(napi); + + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + } + return work_done; +} + +static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr) +{ + struct rhine_private *rp = netdev_priv(dev); + + /* Reset the chip to erase previous misconfiguration. */ + rhine_chip_reset(dev); + + /* Rhine-I needs extra time to recuperate before EEPROM reload */ + if (rp->quirks & rqRhineI) + msleep(5); + + /* Reload EEPROM controlled bytes cleared by soft reset */ + rhine_reload_eeprom(pioaddr, dev); +} + +static const struct net_device_ops rhine_netdev_ops = { + .ndo_open = rhine_open, + .ndo_stop = rhine_close, + .ndo_start_xmit = rhine_start_tx, + .ndo_get_stats = rhine_get_stats, + .ndo_set_multicast_list = rhine_set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_do_ioctl = netdev_ioctl, + .ndo_tx_timeout = rhine_tx_timeout, + .ndo_vlan_rx_add_vid = rhine_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = rhine_vlan_rx_kill_vid, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = rhine_poll, +#endif +}; + +static int __devinit rhine_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct rhine_private *rp; + int i, rc; + u32 quirks; + long pioaddr; + long memaddr; + void __iomem *ioaddr; + int io_size, phy_id; + const char *name; +#ifdef USE_MMIO + int bar = 1; +#else + int bar = 0; +#endif + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + pr_info_once("%s\n", version); +#endif + + io_size = 256; + phy_id = 0; + quirks = 0; + name = "Rhine"; + if (pdev->revision < VTunknown0) { + quirks = rqRhineI; + io_size = 128; + } + else if (pdev->revision >= VT6102) { + quirks = rqWOL | rqForceReset; + if (pdev->revision < VT6105) { + name = "Rhine II"; + quirks |= rqStatusWBRace; /* Rhine-II exclusive */ + } + else { + phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ + if (pdev->revision >= VT6105_B0) + quirks |= rq6patterns; + if (pdev->revision < VT6105M) + name = "Rhine III"; + else + name = "Rhine III (Management Adapter)"; + } + } + + rc = pci_enable_device(pdev); + if (rc) + goto err_out; + + /* this should always be supported */ + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) { + dev_err(&pdev->dev, + "32-bit PCI DMA addresses not supported by the card!?\n"); + goto err_out; + } + + /* sanity check */ + if ((pci_resource_len(pdev, 0) < io_size) || + (pci_resource_len(pdev, 1) < io_size)) { + rc = -EIO; + dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n"); + goto err_out; + } + + pioaddr = pci_resource_start(pdev, 0); + memaddr = pci_resource_start(pdev, 1); + + pci_set_master(pdev); + + dev = alloc_etherdev(sizeof(struct rhine_private)); + if (!dev) { + rc = -ENOMEM; + dev_err(&pdev->dev, "alloc_etherdev failed\n"); + goto err_out; + } + SET_NETDEV_DEV(dev, &pdev->dev); + + rp = netdev_priv(dev); + rp->dev = dev; + rp->quirks = quirks; + rp->pioaddr = pioaddr; + rp->pdev = pdev; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto err_out_free_netdev; + + ioaddr = pci_iomap(pdev, bar, io_size); + if (!ioaddr) { + rc = -EIO; + dev_err(&pdev->dev, + "ioremap failed for device %s, region 0x%X @ 0x%lX\n", + pci_name(pdev), io_size, memaddr); + goto err_out_free_res; + } + +#ifdef USE_MMIO + enable_mmio(pioaddr, quirks); + + /* Check that selected MMIO registers match the PIO ones */ + i = 0; + while (mmio_verify_registers[i]) { + int reg = mmio_verify_registers[i++]; + unsigned char a = inb(pioaddr+reg); + unsigned char b = readb(ioaddr+reg); + if (a != b) { + rc = -EIO; + dev_err(&pdev->dev, + "MMIO do not match PIO [%02x] (%02x != %02x)\n", + reg, a, b); + goto err_out_unmap; + } + } +#endif /* USE_MMIO */ + + dev->base_addr = (unsigned long)ioaddr; + rp->base = ioaddr; + + /* Get chip registers into a sane state */ + rhine_power_init(dev); + rhine_hw_init(dev, pioaddr); + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); + + if (!is_valid_ether_addr(dev->dev_addr)) { + /* Report it and use a random ethernet address instead */ + netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr); + random_ether_addr(dev->dev_addr); + netdev_info(dev, "Using random MAC address: %pM\n", + dev->dev_addr); + } + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + /* For Rhine-I/II, phy_id is loaded from EEPROM */ + if (!phy_id) + phy_id = ioread8(ioaddr + 0x6C); + + dev->irq = pdev->irq; + + spin_lock_init(&rp->lock); + INIT_WORK(&rp->reset_task, rhine_reset_task); + + rp->mii_if.dev = dev; + rp->mii_if.mdio_read = mdio_read; + rp->mii_if.mdio_write = mdio_write; + rp->mii_if.phy_id_mask = 0x1f; + rp->mii_if.reg_num_mask = 0x1f; + + /* The chip-specific entries in the device structure. */ + dev->netdev_ops = &rhine_netdev_ops; + dev->ethtool_ops = &netdev_ethtool_ops, + dev->watchdog_timeo = TX_TIMEOUT; + + netif_napi_add(dev, &rp->napi, rhine_napipoll, 64); + + if (rp->quirks & rqRhineI) + dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; + + if (pdev->revision >= VT6105M) + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + + /* dev->name not defined before register_netdev()! */ + rc = register_netdev(dev); + if (rc) + goto err_out_unmap; + + netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n", + name, +#ifdef USE_MMIO + memaddr, +#else + (long)ioaddr, +#endif + dev->dev_addr, pdev->irq); + + pci_set_drvdata(pdev, dev); + + { + u16 mii_cmd; + int mii_status = mdio_read(dev, phy_id, 1); + mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE; + mdio_write(dev, phy_id, MII_BMCR, mii_cmd); + if (mii_status != 0xffff && mii_status != 0x0000) { + rp->mii_if.advertising = mdio_read(dev, phy_id, 4); + netdev_info(dev, + "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n", + phy_id, + mii_status, rp->mii_if.advertising, + mdio_read(dev, phy_id, 5)); + + /* set IFF_RUNNING */ + if (mii_status & BMSR_LSTATUS) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + + } + } + rp->mii_if.phy_id = phy_id; + if (debug > 1 && avoid_D3) + netdev_info(dev, "No D3 power state at shutdown\n"); + + return 0; + +err_out_unmap: + pci_iounmap(pdev, ioaddr); +err_out_free_res: + pci_release_regions(pdev); +err_out_free_netdev: + free_netdev(dev); +err_out: + return rc; +} + +static int alloc_ring(struct net_device* dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void *ring; + dma_addr_t ring_dma; + + ring = pci_alloc_consistent(rp->pdev, + RX_RING_SIZE * sizeof(struct rx_desc) + + TX_RING_SIZE * sizeof(struct tx_desc), + &ring_dma); + if (!ring) { + netdev_err(dev, "Could not allocate DMA memory\n"); + return -ENOMEM; + } + if (rp->quirks & rqRhineI) { + rp->tx_bufs = pci_alloc_consistent(rp->pdev, + PKT_BUF_SZ * TX_RING_SIZE, + &rp->tx_bufs_dma); + if (rp->tx_bufs == NULL) { + pci_free_consistent(rp->pdev, + RX_RING_SIZE * sizeof(struct rx_desc) + + TX_RING_SIZE * sizeof(struct tx_desc), + ring, ring_dma); + return -ENOMEM; + } + } + + rp->rx_ring = ring; + rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc); + rp->rx_ring_dma = ring_dma; + rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc); + + return 0; +} + +static void free_ring(struct net_device* dev) +{ + struct rhine_private *rp = netdev_priv(dev); + + pci_free_consistent(rp->pdev, + RX_RING_SIZE * sizeof(struct rx_desc) + + TX_RING_SIZE * sizeof(struct tx_desc), + rp->rx_ring, rp->rx_ring_dma); + rp->tx_ring = NULL; + + if (rp->tx_bufs) + pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE, + rp->tx_bufs, rp->tx_bufs_dma); + + rp->tx_bufs = NULL; + +} + +static void alloc_rbufs(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + dma_addr_t next; + int i; + + rp->dirty_rx = rp->cur_rx = 0; + + rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); + rp->rx_head_desc = &rp->rx_ring[0]; + next = rp->rx_ring_dma; + + /* Init the ring entries */ + for (i = 0; i < RX_RING_SIZE; i++) { + rp->rx_ring[i].rx_status = 0; + rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz); + next += sizeof(struct rx_desc); + rp->rx_ring[i].next_desc = cpu_to_le32(next); + rp->rx_skbuff[i] = NULL; + } + /* Mark the last entry as wrapping the ring. */ + rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma); + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz); + rp->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + + rp->rx_skbuff_dma[i] = + pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]); + rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn); + } + rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); +} + +static void free_rbufs(struct net_device* dev) +{ + struct rhine_private *rp = netdev_priv(dev); + int i; + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + rp->rx_ring[i].rx_status = 0; + rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ + if (rp->rx_skbuff[i]) { + pci_unmap_single(rp->pdev, + rp->rx_skbuff_dma[i], + rp->rx_buf_sz, PCI_DMA_FROMDEVICE); + dev_kfree_skb(rp->rx_skbuff[i]); + } + rp->rx_skbuff[i] = NULL; + } +} + +static void alloc_tbufs(struct net_device* dev) +{ + struct rhine_private *rp = netdev_priv(dev); + dma_addr_t next; + int i; + + rp->dirty_tx = rp->cur_tx = 0; + next = rp->tx_ring_dma; + for (i = 0; i < TX_RING_SIZE; i++) { + rp->tx_skbuff[i] = NULL; + rp->tx_ring[i].tx_status = 0; + rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); + next += sizeof(struct tx_desc); + rp->tx_ring[i].next_desc = cpu_to_le32(next); + if (rp->quirks & rqRhineI) + rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; + } + rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma); + +} + +static void free_tbufs(struct net_device* dev) +{ + struct rhine_private *rp = netdev_priv(dev); + int i; + + for (i = 0; i < TX_RING_SIZE; i++) { + rp->tx_ring[i].tx_status = 0; + rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); + rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ + if (rp->tx_skbuff[i]) { + if (rp->tx_skbuff_dma[i]) { + pci_unmap_single(rp->pdev, + rp->tx_skbuff_dma[i], + rp->tx_skbuff[i]->len, + PCI_DMA_TODEVICE); + } + dev_kfree_skb(rp->tx_skbuff[i]); + } + rp->tx_skbuff[i] = NULL; + rp->tx_buf[i] = NULL; + } +} + +static void rhine_check_media(struct net_device *dev, unsigned int init_media) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + mii_check_media(&rp->mii_if, debug, init_media); + + if (rp->mii_if.full_duplex) + iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex, + ioaddr + ChipCmd1); + else + iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex, + ioaddr + ChipCmd1); + if (debug > 1) + netdev_info(dev, "force_media %d, carrier %d\n", + rp->mii_if.force_media, netif_carrier_ok(dev)); +} + +/* Called after status of force_media possibly changed */ +static void rhine_set_carrier(struct mii_if_info *mii) +{ + if (mii->force_media) { + /* autoneg is off: Link is always assumed to be up */ + if (!netif_carrier_ok(mii->dev)) + netif_carrier_on(mii->dev); + } + else /* Let MMI library update carrier status */ + rhine_check_media(mii->dev, 0); + if (debug > 1) + netdev_info(mii->dev, "force_media %d, carrier %d\n", + mii->force_media, netif_carrier_ok(mii->dev)); +} + +/** + * rhine_set_cam - set CAM multicast filters + * @ioaddr: register block of this Rhine + * @idx: multicast CAM index [0..MCAM_SIZE-1] + * @addr: multicast address (6 bytes) + * + * Load addresses into multicast filters. + */ +static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr) +{ + int i; + + iowrite8(CAMC_CAMEN, ioaddr + CamCon); + wmb(); + + /* Paranoid -- idx out of range should never happen */ + idx &= (MCAM_SIZE - 1); + + iowrite8((u8) idx, ioaddr + CamAddr); + + for (i = 0; i < 6; i++, addr++) + iowrite8(*addr, ioaddr + MulticastFilter0 + i); + udelay(10); + wmb(); + + iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); + udelay(10); + + iowrite8(0, ioaddr + CamCon); +} + +/** + * rhine_set_vlan_cam - set CAM VLAN filters + * @ioaddr: register block of this Rhine + * @idx: VLAN CAM index [0..VCAM_SIZE-1] + * @addr: VLAN ID (2 bytes) + * + * Load addresses into VLAN filters. + */ +static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr) +{ + iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); + wmb(); + + /* Paranoid -- idx out of range should never happen */ + idx &= (VCAM_SIZE - 1); + + iowrite8((u8) idx, ioaddr + CamAddr); + + iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6); + udelay(10); + wmb(); + + iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); + udelay(10); + + iowrite8(0, ioaddr + CamCon); +} + +/** + * rhine_set_cam_mask - set multicast CAM mask + * @ioaddr: register block of this Rhine + * @mask: multicast CAM mask + * + * Mask sets multicast filters active/inactive. + */ +static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask) +{ + iowrite8(CAMC_CAMEN, ioaddr + CamCon); + wmb(); + + /* write mask */ + iowrite32(mask, ioaddr + CamMask); + + /* disable CAMEN */ + iowrite8(0, ioaddr + CamCon); +} + +/** + * rhine_set_vlan_cam_mask - set VLAN CAM mask + * @ioaddr: register block of this Rhine + * @mask: VLAN CAM mask + * + * Mask sets VLAN filters active/inactive. + */ +static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask) +{ + iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); + wmb(); + + /* write mask */ + iowrite32(mask, ioaddr + CamMask); + + /* disable CAMEN */ + iowrite8(0, ioaddr + CamCon); +} + +/** + * rhine_init_cam_filter - initialize CAM filters + * @dev: network device + * + * Initialize (disable) hardware VLAN and multicast support on this + * Rhine. + */ +static void rhine_init_cam_filter(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + /* Disable all CAMs */ + rhine_set_vlan_cam_mask(ioaddr, 0); + rhine_set_cam_mask(ioaddr, 0); + + /* disable hardware VLAN support */ + BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig); + BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); +} + +/** + * rhine_update_vcam - update VLAN CAM filters + * @rp: rhine_private data of this Rhine + * + * Update VLAN CAM filters to match configuration change. + */ +static void rhine_update_vcam(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + u16 vid; + u32 vCAMmask = 0; /* 32 vCAMs (6105M and better) */ + unsigned int i = 0; + + for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) { + rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid); + vCAMmask |= 1 << i; + if (++i >= VCAM_SIZE) + break; + } + rhine_set_vlan_cam_mask(ioaddr, vCAMmask); +} + +static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct rhine_private *rp = netdev_priv(dev); + + spin_lock_irq(&rp->lock); + set_bit(vid, rp->active_vlans); + rhine_update_vcam(dev); + spin_unlock_irq(&rp->lock); +} + +static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct rhine_private *rp = netdev_priv(dev); + + spin_lock_irq(&rp->lock); + clear_bit(vid, rp->active_vlans); + rhine_update_vcam(dev); + spin_unlock_irq(&rp->lock); +} + +static void init_registers(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int i; + + for (i = 0; i < 6; i++) + iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); + + /* Initialize other registers. */ + iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */ + /* Configure initial FIFO thresholds. */ + iowrite8(0x20, ioaddr + TxConfig); + rp->tx_thresh = 0x20; + rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */ + + iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr); + iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr); + + rhine_set_rx_mode(dev); + + if (rp->pdev->revision >= VT6105M) + rhine_init_cam_filter(dev); + + napi_enable(&rp->napi); + + /* Enable interrupts by setting the interrupt mask. */ + iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | + IntrRxDropped | IntrRxNoBuf | IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8), + ioaddr + ChipCmd); + rhine_check_media(dev, 1); +} + +/* Enable MII link status auto-polling (required for IntrLinkChange) */ +static void rhine_enable_linkmon(void __iomem *ioaddr) +{ + iowrite8(0, ioaddr + MIICmd); + iowrite8(MII_BMSR, ioaddr + MIIRegAddr); + iowrite8(0x80, ioaddr + MIICmd); + + RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20)); + + iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr); +} + +/* Disable MII link status auto-polling (required for MDIO access) */ +static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) +{ + iowrite8(0, ioaddr + MIICmd); + + if (quirks & rqRhineI) { + iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR + + /* Can be called from ISR. Evil. */ + mdelay(1); + + /* 0x80 must be set immediately before turning it off */ + iowrite8(0x80, ioaddr + MIICmd); + + RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20); + + /* Heh. Now clear 0x80 again. */ + iowrite8(0, ioaddr + MIICmd); + } + else + RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80); +} + +/* Read and write over the MII Management Data I/O (MDIO) interface. */ + +static int mdio_read(struct net_device *dev, int phy_id, int regnum) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int result; + + rhine_disable_linkmon(ioaddr, rp->quirks); + + /* rhine_disable_linkmon already cleared MIICmd */ + iowrite8(phy_id, ioaddr + MIIPhyAddr); + iowrite8(regnum, ioaddr + MIIRegAddr); + iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */ + RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40)); + result = ioread16(ioaddr + MIIData); + + rhine_enable_linkmon(ioaddr); + return result; +} + +static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + rhine_disable_linkmon(ioaddr, rp->quirks); + + /* rhine_disable_linkmon already cleared MIICmd */ + iowrite8(phy_id, ioaddr + MIIPhyAddr); + iowrite8(regnum, ioaddr + MIIRegAddr); + iowrite16(value, ioaddr + MIIData); + iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */ + RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20)); + + rhine_enable_linkmon(ioaddr); +} + +static int rhine_open(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int rc; + + rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name, + dev); + if (rc) + return rc; + + if (debug > 1) + netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq); + + rc = alloc_ring(dev); + if (rc) { + free_irq(rp->pdev->irq, dev); + return rc; + } + alloc_rbufs(dev); + alloc_tbufs(dev); + rhine_chip_reset(dev); + init_registers(dev); + if (debug > 2) + netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n", + __func__, ioread16(ioaddr + ChipCmd), + mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + + netif_start_queue(dev); + + return 0; +} + +static void rhine_reset_task(struct work_struct *work) +{ + struct rhine_private *rp = container_of(work, struct rhine_private, + reset_task); + struct net_device *dev = rp->dev; + + /* protect against concurrent rx interrupts */ + disable_irq(rp->pdev->irq); + + napi_disable(&rp->napi); + + spin_lock_bh(&rp->lock); + + /* clear all descriptors */ + free_tbufs(dev); + free_rbufs(dev); + alloc_tbufs(dev); + alloc_rbufs(dev); + + /* Reinitialize the hardware. */ + rhine_chip_reset(dev); + init_registers(dev); + + spin_unlock_bh(&rp->lock); + enable_irq(rp->pdev->irq); + + dev->trans_start = jiffies; /* prevent tx timeout */ + dev->stats.tx_errors++; + netif_wake_queue(dev); +} + +static void rhine_tx_timeout(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n", + ioread16(ioaddr + IntrStatus), + mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); + + schedule_work(&rp->reset_task); +} + +static netdev_tx_t rhine_start_tx(struct sk_buff *skb, + struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + unsigned entry; + unsigned long flags; + + /* Caution: the write order is important here, set the field + with the "ownership" bits last. */ + + /* Calculate the next Tx descriptor entry. */ + entry = rp->cur_tx % TX_RING_SIZE; + + if (skb_padto(skb, ETH_ZLEN)) + return NETDEV_TX_OK; + + rp->tx_skbuff[entry] = skb; + + if ((rp->quirks & rqRhineI) && + (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) { + /* Must use alignment buffer. */ + if (skb->len > PKT_BUF_SZ) { + /* packet too long, drop it */ + dev_kfree_skb(skb); + rp->tx_skbuff[entry] = NULL; + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + /* Padding is not copied and so must be redone. */ + skb_copy_and_csum_dev(skb, rp->tx_buf[entry]); + if (skb->len < ETH_ZLEN) + memset(rp->tx_buf[entry] + skb->len, 0, + ETH_ZLEN - skb->len); + rp->tx_skbuff_dma[entry] = 0; + rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma + + (rp->tx_buf[entry] - + rp->tx_bufs)); + } else { + rp->tx_skbuff_dma[entry] = + pci_map_single(rp->pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]); + } + + rp->tx_ring[entry].desc_length = + cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); + + if (unlikely(vlan_tx_tag_present(skb))) { + rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); + /* request tagging */ + rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); + } + else + rp->tx_ring[entry].tx_status = 0; + + /* lock eth irq */ + spin_lock_irqsave(&rp->lock, flags); + wmb(); + rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn); + wmb(); + + rp->cur_tx++; + + /* Non-x86 Todo: explicitly flush cache lines here. */ + + if (vlan_tx_tag_present(skb)) + /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ + BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); + + /* Wake the potentially-idle transmit channel */ + iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, + ioaddr + ChipCmd1); + IOSYNC; + + if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN) + netif_stop_queue(dev); + + spin_unlock_irqrestore(&rp->lock, flags); + + if (debug > 4) { + netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n", + rp->cur_tx-1, entry); + } + return NETDEV_TX_OK; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t rhine_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + u32 intr_status; + int boguscnt = max_interrupt_work; + int handled = 0; + + while ((intr_status = get_intr_status(dev))) { + handled = 1; + + /* Acknowledge all of the current interrupt sources ASAP. */ + if (intr_status & IntrTxDescRace) + iowrite8(0x08, ioaddr + IntrStatus2); + iowrite16(intr_status & 0xffff, ioaddr + IntrStatus); + IOSYNC; + + if (debug > 4) + netdev_dbg(dev, "Interrupt, status %08x\n", + intr_status); + + if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | + IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { + iowrite16(IntrTxAborted | + IntrTxDone | IntrTxError | IntrTxUnderrun | + IntrPCIErr | IntrStatsMax | IntrLinkChange, + ioaddr + IntrEnable); + + napi_schedule(&rp->napi); + } + + if (intr_status & (IntrTxErrSummary | IntrTxDone)) { + if (intr_status & IntrTxErrSummary) { + /* Avoid scavenging before Tx engine turned off */ + RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); + if (debug > 2 && + ioread8(ioaddr+ChipCmd) & CmdTxOn) + netdev_warn(dev, + "%s: Tx engine still on\n", + __func__); + } + rhine_tx(dev); + } + + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (IntrPCIErr | IntrLinkChange | + IntrStatsMax | IntrTxError | IntrTxAborted | + IntrTxUnderrun | IntrTxDescRace)) + rhine_error(dev, intr_status); + + if (--boguscnt < 0) { + netdev_warn(dev, "Too much work at interrupt, status=%#08x\n", + intr_status); + break; + } + } + + if (debug > 3) + netdev_dbg(dev, "exiting interrupt, status=%08x\n", + ioread16(ioaddr + IntrStatus)); + return IRQ_RETVAL(handled); +} + +/* This routine is logically part of the interrupt handler, but isolated + for clarity. */ +static void rhine_tx(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE; + + spin_lock(&rp->lock); + + /* find and cleanup dirty tx descriptors */ + while (rp->dirty_tx != rp->cur_tx) { + txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); + if (debug > 6) + netdev_dbg(dev, "Tx scavenge %d status %08x\n", + entry, txstatus); + if (txstatus & DescOwn) + break; + if (txstatus & 0x8000) { + if (debug > 1) + netdev_dbg(dev, "Transmit error, Tx status %08x\n", + txstatus); + dev->stats.tx_errors++; + if (txstatus & 0x0400) + dev->stats.tx_carrier_errors++; + if (txstatus & 0x0200) + dev->stats.tx_window_errors++; + if (txstatus & 0x0100) + dev->stats.tx_aborted_errors++; + if (txstatus & 0x0080) + dev->stats.tx_heartbeat_errors++; + if (((rp->quirks & rqRhineI) && txstatus & 0x0002) || + (txstatus & 0x0800) || (txstatus & 0x1000)) { + dev->stats.tx_fifo_errors++; + rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); + break; /* Keep the skb - we try again */ + } + /* Transmitter restarted in 'abnormal' handler. */ + } else { + if (rp->quirks & rqRhineI) + dev->stats.collisions += (txstatus >> 3) & 0x0F; + else + dev->stats.collisions += txstatus & 0x0F; + if (debug > 6) + netdev_dbg(dev, "collisions: %1.1x:%1.1x\n", + (txstatus >> 3) & 0xF, + txstatus & 0xF); + dev->stats.tx_bytes += rp->tx_skbuff[entry]->len; + dev->stats.tx_packets++; + } + /* Free the original skb. */ + if (rp->tx_skbuff_dma[entry]) { + pci_unmap_single(rp->pdev, + rp->tx_skbuff_dma[entry], + rp->tx_skbuff[entry]->len, + PCI_DMA_TODEVICE); + } + dev_kfree_skb_irq(rp->tx_skbuff[entry]); + rp->tx_skbuff[entry] = NULL; + entry = (++rp->dirty_tx) % TX_RING_SIZE; + } + if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4) + netif_wake_queue(dev); + + spin_unlock(&rp->lock); +} + +/** + * rhine_get_vlan_tci - extract TCI from Rx data buffer + * @skb: pointer to sk_buff + * @data_size: used data area of the buffer including CRC + * + * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q + * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte + * aligned following the CRC. + */ +static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size) +{ + u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2; + return be16_to_cpup((__be16 *)trailer); +} + +/* Process up to limit frames from receive ring */ +static int rhine_rx(struct net_device *dev, int limit) +{ + struct rhine_private *rp = netdev_priv(dev); + int count; + int entry = rp->cur_rx % RX_RING_SIZE; + + if (debug > 4) { + netdev_dbg(dev, "%s(), entry %d status %08x\n", + __func__, entry, + le32_to_cpu(rp->rx_head_desc->rx_status)); + } + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + for (count = 0; count < limit; ++count) { + struct rx_desc *desc = rp->rx_head_desc; + u32 desc_status = le32_to_cpu(desc->rx_status); + u32 desc_length = le32_to_cpu(desc->desc_length); + int data_size = desc_status >> 16; + + if (desc_status & DescOwn) + break; + + if (debug > 4) + netdev_dbg(dev, "%s() status is %08x\n", + __func__, desc_status); + + if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { + if ((desc_status & RxWholePkt) != RxWholePkt) { + netdev_warn(dev, + "Oversized Ethernet frame spanned multiple buffers, " + "entry %#x length %d status %08x!\n", + entry, data_size, + desc_status); + netdev_warn(dev, + "Oversized Ethernet frame %p vs %p\n", + rp->rx_head_desc, + &rp->rx_ring[entry]); + dev->stats.rx_length_errors++; + } else if (desc_status & RxErr) { + /* There was a error. */ + if (debug > 2) + netdev_dbg(dev, "%s() Rx error was %08x\n", + __func__, desc_status); + dev->stats.rx_errors++; + if (desc_status & 0x0030) + dev->stats.rx_length_errors++; + if (desc_status & 0x0048) + dev->stats.rx_fifo_errors++; + if (desc_status & 0x0004) + dev->stats.rx_frame_errors++; + if (desc_status & 0x0002) { + /* this can also be updated outside the interrupt handler */ + spin_lock(&rp->lock); + dev->stats.rx_crc_errors++; + spin_unlock(&rp->lock); + } + } + } else { + struct sk_buff *skb = NULL; + /* Length should omit the CRC */ + int pkt_len = data_size - 4; + u16 vlan_tci = 0; + + /* Check if the packet is long enough to accept without + copying to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak) + skb = netdev_alloc_skb_ip_align(dev, pkt_len); + if (skb) { + pci_dma_sync_single_for_cpu(rp->pdev, + rp->rx_skbuff_dma[entry], + rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + + skb_copy_to_linear_data(skb, + rp->rx_skbuff[entry]->data, + pkt_len); + skb_put(skb, pkt_len); + pci_dma_sync_single_for_device(rp->pdev, + rp->rx_skbuff_dma[entry], + rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + } else { + skb = rp->rx_skbuff[entry]; + if (skb == NULL) { + netdev_err(dev, "Inconsistent Rx descriptor chain\n"); + break; + } + rp->rx_skbuff[entry] = NULL; + skb_put(skb, pkt_len); + pci_unmap_single(rp->pdev, + rp->rx_skbuff_dma[entry], + rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + } + + if (unlikely(desc_length & DescTag)) + vlan_tci = rhine_get_vlan_tci(skb, data_size); + + skb->protocol = eth_type_trans(skb, dev); + + if (unlikely(desc_length & DescTag)) + __vlan_hwaccel_put_tag(skb, vlan_tci); + netif_receive_skb(skb); + dev->stats.rx_bytes += pkt_len; + dev->stats.rx_packets++; + } + entry = (++rp->cur_rx) % RX_RING_SIZE; + rp->rx_head_desc = &rp->rx_ring[entry]; + } + + /* Refill the Rx ring buffers. */ + for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) { + struct sk_buff *skb; + entry = rp->dirty_rx % RX_RING_SIZE; + if (rp->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb(dev, rp->rx_buf_sz); + rp->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + rp->rx_skbuff_dma[entry] = + pci_map_single(rp->pdev, skb->data, + rp->rx_buf_sz, + PCI_DMA_FROMDEVICE); + rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]); + } + rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); + } + + return count; +} + +/* + * Clears the "tally counters" for CRC errors and missed frames(?). + * It has been reported that some chips need a write of 0 to clear + * these, for others the counters are set to 1 when written to and + * instead cleared when read. So we clear them both ways ... + */ +static inline void clear_tally_counters(void __iomem *ioaddr) +{ + iowrite32(0, ioaddr + RxMissed); + ioread16(ioaddr + RxCRCErrs); + ioread16(ioaddr + RxMissed); +} + +static void rhine_restart_tx(struct net_device *dev) { + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + int entry = rp->dirty_tx % TX_RING_SIZE; + u32 intr_status; + + /* + * If new errors occurred, we need to sort them out before doing Tx. + * In that case the ISR will be back here RSN anyway. + */ + intr_status = get_intr_status(dev); + + if ((intr_status & IntrTxErrSummary) == 0) { + + /* We know better than the chip where it should continue. */ + iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc), + ioaddr + TxRingPtr); + + iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn, + ioaddr + ChipCmd); + + if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000)) + /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ + BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); + + iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, + ioaddr + ChipCmd1); + IOSYNC; + } + else { + /* This should never happen */ + if (debug > 1) + netdev_warn(dev, "%s() Another error occurred %08x\n", + __func__, intr_status); + } + +} + +static void rhine_error(struct net_device *dev, int intr_status) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + spin_lock(&rp->lock); + + if (intr_status & IntrLinkChange) + rhine_check_media(dev, 0); + if (intr_status & IntrStatsMax) { + dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); + dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); + clear_tally_counters(ioaddr); + } + if (intr_status & IntrTxAborted) { + if (debug > 1) + netdev_info(dev, "Abort %08x, frame dropped\n", + intr_status); + } + if (intr_status & IntrTxUnderrun) { + if (rp->tx_thresh < 0xE0) + BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); + if (debug > 1) + netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n", + rp->tx_thresh); + } + if (intr_status & IntrTxDescRace) { + if (debug > 2) + netdev_info(dev, "Tx descriptor write-back race\n"); + } + if ((intr_status & IntrTxError) && + (intr_status & (IntrTxAborted | + IntrTxUnderrun | IntrTxDescRace)) == 0) { + if (rp->tx_thresh < 0xE0) { + BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); + } + if (debug > 1) + netdev_info(dev, "Unspecified error. Tx threshold now %02x\n", + rp->tx_thresh); + } + if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace | + IntrTxError)) + rhine_restart_tx(dev); + + if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun | + IntrTxError | IntrTxAborted | IntrNormalSummary | + IntrTxDescRace)) { + if (debug > 1) + netdev_err(dev, "Something Wicked happened! %08x\n", + intr_status); + } + + spin_unlock(&rp->lock); +} + +static struct net_device_stats *rhine_get_stats(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + unsigned long flags; + + spin_lock_irqsave(&rp->lock, flags); + dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); + dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); + clear_tally_counters(ioaddr); + spin_unlock_irqrestore(&rp->lock, flags); + + return &dev->stats; +} + +static void rhine_set_rx_mode(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + u32 mc_filter[2]; /* Multicast hash filter */ + u8 rx_mode = 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */ + struct netdev_hw_addr *ha; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + rx_mode = 0x1C; + iowrite32(0xffffffff, ioaddr + MulticastFilter0); + iowrite32(0xffffffff, ioaddr + MulticastFilter1); + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + iowrite32(0xffffffff, ioaddr + MulticastFilter0); + iowrite32(0xffffffff, ioaddr + MulticastFilter1); + } else if (rp->pdev->revision >= VT6105M) { + int i = 0; + u32 mCAMmask = 0; /* 32 mCAMs (6105M and better) */ + netdev_for_each_mc_addr(ha, dev) { + if (i == MCAM_SIZE) + break; + rhine_set_cam(ioaddr, i, ha->addr); + mCAMmask |= 1 << i; + i++; + } + rhine_set_cam_mask(ioaddr, mCAMmask); + } else { + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; + + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + iowrite32(mc_filter[0], ioaddr + MulticastFilter0); + iowrite32(mc_filter[1], ioaddr + MulticastFilter1); + } + /* enable/disable VLAN receive filtering */ + if (rp->pdev->revision >= VT6105M) { + if (dev->flags & IFF_PROMISC) + BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); + else + BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1); + } + BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig); +} + +static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct rhine_private *rp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(rp->pdev)); +} + +static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct rhine_private *rp = netdev_priv(dev); + int rc; + + spin_lock_irq(&rp->lock); + rc = mii_ethtool_gset(&rp->mii_if, cmd); + spin_unlock_irq(&rp->lock); + + return rc; +} + +static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct rhine_private *rp = netdev_priv(dev); + int rc; + + spin_lock_irq(&rp->lock); + rc = mii_ethtool_sset(&rp->mii_if, cmd); + spin_unlock_irq(&rp->lock); + rhine_set_carrier(&rp->mii_if); + + return rc; +} + +static int netdev_nway_reset(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + + return mii_nway_restart(&rp->mii_if); +} + +static u32 netdev_get_link(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + + return mii_link_ok(&rp->mii_if); +} + +static u32 netdev_get_msglevel(struct net_device *dev) +{ + return debug; +} + +static void netdev_set_msglevel(struct net_device *dev, u32 value) +{ + debug = value; +} + +static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rhine_private *rp = netdev_priv(dev); + + if (!(rp->quirks & rqWOL)) + return; + + spin_lock_irq(&rp->lock); + wol->supported = WAKE_PHY | WAKE_MAGIC | + WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */ + wol->wolopts = rp->wolopts; + spin_unlock_irq(&rp->lock); +} + +static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rhine_private *rp = netdev_priv(dev); + u32 support = WAKE_PHY | WAKE_MAGIC | + WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */ + + if (!(rp->quirks & rqWOL)) + return -EINVAL; + + if (wol->wolopts & ~support) + return -EINVAL; + + spin_lock_irq(&rp->lock); + rp->wolopts = wol->wolopts; + spin_unlock_irq(&rp->lock); + + return 0; +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, + .get_settings = netdev_get_settings, + .set_settings = netdev_set_settings, + .nway_reset = netdev_nway_reset, + .get_link = netdev_get_link, + .get_msglevel = netdev_get_msglevel, + .set_msglevel = netdev_set_msglevel, + .get_wol = rhine_get_wol, + .set_wol = rhine_set_wol, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct rhine_private *rp = netdev_priv(dev); + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irq(&rp->lock); + rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL); + spin_unlock_irq(&rp->lock); + rhine_set_carrier(&rp->mii_if); + + return rc; +} + +static int rhine_close(struct net_device *dev) +{ + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + napi_disable(&rp->napi); + cancel_work_sync(&rp->reset_task); + netif_stop_queue(dev); + + spin_lock_irq(&rp->lock); + + if (debug > 1) + netdev_dbg(dev, "Shutting down ethercard, status was %04x\n", + ioread16(ioaddr + ChipCmd)); + + /* Switch to loopback mode to avoid hardware races. */ + iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig); + + /* Disable interrupts by clearing the interrupt mask. */ + iowrite16(0x0000, ioaddr + IntrEnable); + + /* Stop the chip's Tx and Rx processes. */ + iowrite16(CmdStop, ioaddr + ChipCmd); + + spin_unlock_irq(&rp->lock); + + free_irq(rp->pdev->irq, dev); + free_rbufs(dev); + free_tbufs(dev); + free_ring(dev); + + return 0; +} + + +static void __devexit rhine_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rhine_private *rp = netdev_priv(dev); + + unregister_netdev(dev); + + pci_iounmap(pdev, rp->base); + pci_release_regions(pdev); + + free_netdev(dev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static void rhine_shutdown (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rhine_private *rp = netdev_priv(dev); + void __iomem *ioaddr = rp->base; + + if (!(rp->quirks & rqWOL)) + return; /* Nothing to do for non-WOL adapters */ + + rhine_power_init(dev); + + /* Make sure we use pattern 0, 1 and not 4, 5 */ + if (rp->quirks & rq6patterns) + iowrite8(0x04, ioaddr + WOLcgClr); + + if (rp->wolopts & WAKE_MAGIC) { + iowrite8(WOLmagic, ioaddr + WOLcrSet); + /* + * Turn EEPROM-controlled wake-up back on -- some hardware may + * not cooperate otherwise. + */ + iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA); + } + + if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST)) + iowrite8(WOLbmcast, ioaddr + WOLcgSet); + + if (rp->wolopts & WAKE_PHY) + iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet); + + if (rp->wolopts & WAKE_UCAST) + iowrite8(WOLucast, ioaddr + WOLcrSet); + + if (rp->wolopts) { + /* Enable legacy WOL (for old motherboards) */ + iowrite8(0x01, ioaddr + PwcfgSet); + iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW); + } + + /* Hit power state D3 (sleep) */ + if (!avoid_D3) + iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); + + /* TODO: Check use of pci_enable_wake() */ + +} + +#ifdef CONFIG_PM +static int rhine_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rhine_private *rp = netdev_priv(dev); + unsigned long flags; + + if (!netif_running(dev)) + return 0; + + napi_disable(&rp->napi); + + netif_device_detach(dev); + pci_save_state(pdev); + + spin_lock_irqsave(&rp->lock, flags); + rhine_shutdown(pdev); + spin_unlock_irqrestore(&rp->lock, flags); + + free_irq(dev->irq, dev); + return 0; +} + +static int rhine_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct rhine_private *rp = netdev_priv(dev); + unsigned long flags; + int ret; + + if (!netif_running(dev)) + return 0; + + if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev)) + netdev_err(dev, "request_irq failed\n"); + + ret = pci_set_power_state(pdev, PCI_D0); + if (debug > 1) + netdev_info(dev, "Entering power state D0 %s (%d)\n", + ret ? "failed" : "succeeded", ret); + + pci_restore_state(pdev); + + spin_lock_irqsave(&rp->lock, flags); +#ifdef USE_MMIO + enable_mmio(rp->pioaddr, rp->quirks); +#endif + rhine_power_init(dev); + free_tbufs(dev); + free_rbufs(dev); + alloc_tbufs(dev); + alloc_rbufs(dev); + init_registers(dev); + spin_unlock_irqrestore(&rp->lock, flags); + + netif_device_attach(dev); + + return 0; +} +#endif /* CONFIG_PM */ + +static struct pci_driver rhine_driver = { + .name = DRV_NAME, + .id_table = rhine_pci_tbl, + .probe = rhine_init_one, + .remove = __devexit_p(rhine_remove_one), +#ifdef CONFIG_PM + .suspend = rhine_suspend, + .resume = rhine_resume, +#endif /* CONFIG_PM */ + .shutdown = rhine_shutdown, +}; + +static struct dmi_system_id __initdata rhine_dmi_table[] = { + { + .ident = "EPIA-M", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), + DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), + }, + }, + { + .ident = "KV7", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), + DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), + }, + }, + { NULL } +}; + +static int __init rhine_init(void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + pr_info("%s\n", version); +#endif + if (dmi_check_system(rhine_dmi_table)) { + /* these BIOSes fail at PXE boot if chip is in D3 */ + avoid_D3 = 1; + pr_warn("Broken BIOS detected, avoid_D3 enabled\n"); + } + else if (avoid_D3) + pr_info("avoid_D3 set\n"); + + return pci_register_driver(&rhine_driver); +} + + +static void __exit rhine_cleanup(void) +{ + pci_unregister_driver(&rhine_driver); +} + + +module_init(rhine_init); +module_exit(rhine_cleanup); diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c new file mode 100644 index 000000000000..490ec5b2775a --- /dev/null +++ b/drivers/net/ethernet/via/via-velocity.c @@ -0,0 +1,3592 @@ +/* + * This code is derived from the VIA reference driver (copyright message + * below) provided to Red Hat by VIA Networking Technologies, Inc. for + * addition to the Linux kernel. + * + * The code has been merged into one source file, cleaned up to follow + * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned + * for 64bit hardware platforms. + * + * TODO + * rx_copybreak/alignment + * More testing + * + * The changes are (c) Copyright 2004, Red Hat Inc. + * Additional fixes and clean up: Francois Romieu + * + * This source has not been verified for use in safety critical systems. + * + * Please direct queries about the revamped driver to the linux-kernel + * list not VIA. + * + * Original code: + * + * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. + * All rights reserved. + * + * This software may be redistributed and/or modified under + * the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * Author: Chuang Liang-Shing, AJ Jiang + * + * Date: Jan 24, 2003 + * + * MODULE_LICENSE("GPL"); + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "via-velocity.h" + + +static int velocity_nics; +static int msglevel = MSG_LEVEL_INFO; + +/** + * mac_get_cam_mask - Read a CAM mask + * @regs: register block for this velocity + * @mask: buffer to store mask + * + * Fetch the mask bits of the selected CAM and store them into the + * provided mask buffer. + */ +static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask) +{ + int i; + + /* Select CAM mask */ + BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); + + writeb(0, ®s->CAMADDR); + + /* read mask */ + for (i = 0; i < 8; i++) + *mask++ = readb(&(regs->MARCAM[i])); + + /* disable CAMEN */ + writeb(0, ®s->CAMADDR); + + /* Select mar */ + BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); +} + +/** + * mac_set_cam_mask - Set a CAM mask + * @regs: register block for this velocity + * @mask: CAM mask to load + * + * Store a new mask into a CAM + */ +static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask) +{ + int i; + /* Select CAM mask */ + BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); + + writeb(CAMADDR_CAMEN, ®s->CAMADDR); + + for (i = 0; i < 8; i++) + writeb(*mask++, &(regs->MARCAM[i])); + + /* disable CAMEN */ + writeb(0, ®s->CAMADDR); + + /* Select mar */ + BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); +} + +static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask) +{ + int i; + /* Select CAM mask */ + BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); + + writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR); + + for (i = 0; i < 8; i++) + writeb(*mask++, &(regs->MARCAM[i])); + + /* disable CAMEN */ + writeb(0, ®s->CAMADDR); + + /* Select mar */ + BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); +} + +/** + * mac_set_cam - set CAM data + * @regs: register block of this velocity + * @idx: Cam index + * @addr: 2 or 6 bytes of CAM data + * + * Load an address or vlan tag into a CAM + */ +static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr) +{ + int i; + + /* Select CAM mask */ + BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); + + idx &= (64 - 1); + + writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR); + + for (i = 0; i < 6; i++) + writeb(*addr++, &(regs->MARCAM[i])); + + BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR); + + udelay(10); + + writeb(0, ®s->CAMADDR); + + /* Select mar */ + BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); +} + +static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx, + const u8 *addr) +{ + + /* Select CAM mask */ + BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); + + idx &= (64 - 1); + + writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR); + writew(*((u16 *) addr), ®s->MARCAM[0]); + + BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR); + + udelay(10); + + writeb(0, ®s->CAMADDR); + + /* Select mar */ + BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); +} + + +/** + * mac_wol_reset - reset WOL after exiting low power + * @regs: register block of this velocity + * + * Called after we drop out of wake on lan mode in order to + * reset the Wake on lan features. This function doesn't restore + * the rest of the logic from the result of sleep/wakeup + */ +static void mac_wol_reset(struct mac_regs __iomem *regs) +{ + + /* Turn off SWPTAG right after leaving power mode */ + BYTE_REG_BITS_OFF(STICKHW_SWPTAG, ®s->STICKHW); + /* clear sticky bits */ + BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW); + + BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, ®s->CHIPGCR); + BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR); + /* disable force PME-enable */ + writeb(WOLCFG_PMEOVR, ®s->WOLCFGClr); + /* disable power-event config bit */ + writew(0xFFFF, ®s->WOLCRClr); + /* clear power status */ + writew(0xFFFF, ®s->WOLSRClr); +} + +static const struct ethtool_ops velocity_ethtool_ops; + +/* + Define module options +*/ + +MODULE_AUTHOR("VIA Networking Technologies, Inc."); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"); + +#define VELOCITY_PARAM(N, D) \ + static int N[MAX_UNITS] = OPTION_DEFAULT;\ + module_param_array(N, int, NULL, 0); \ + MODULE_PARM_DESC(N, D); + +#define RX_DESC_MIN 64 +#define RX_DESC_MAX 255 +#define RX_DESC_DEF 64 +VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors"); + +#define TX_DESC_MIN 16 +#define TX_DESC_MAX 256 +#define TX_DESC_DEF 64 +VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors"); + +#define RX_THRESH_MIN 0 +#define RX_THRESH_MAX 3 +#define RX_THRESH_DEF 0 +/* rx_thresh[] is used for controlling the receive fifo threshold. + 0: indicate the rxfifo threshold is 128 bytes. + 1: indicate the rxfifo threshold is 512 bytes. + 2: indicate the rxfifo threshold is 1024 bytes. + 3: indicate the rxfifo threshold is store & forward. +*/ +VELOCITY_PARAM(rx_thresh, "Receive fifo threshold"); + +#define DMA_LENGTH_MIN 0 +#define DMA_LENGTH_MAX 7 +#define DMA_LENGTH_DEF 6 + +/* DMA_length[] is used for controlling the DMA length + 0: 8 DWORDs + 1: 16 DWORDs + 2: 32 DWORDs + 3: 64 DWORDs + 4: 128 DWORDs + 5: 256 DWORDs + 6: SF(flush till emply) + 7: SF(flush till emply) +*/ +VELOCITY_PARAM(DMA_length, "DMA length"); + +#define IP_ALIG_DEF 0 +/* IP_byte_align[] is used for IP header DWORD byte aligned + 0: indicate the IP header won't be DWORD byte aligned.(Default) . + 1: indicate the IP header will be DWORD byte aligned. + In some environment, the IP header should be DWORD byte aligned, + or the packet will be droped when we receive it. (eg: IPVS) +*/ +VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); + +#define FLOW_CNTL_DEF 1 +#define FLOW_CNTL_MIN 1 +#define FLOW_CNTL_MAX 5 + +/* flow_control[] is used for setting the flow control ability of NIC. + 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR. + 2: enable TX flow control. + 3: enable RX flow control. + 4: enable RX/TX flow control. + 5: disable +*/ +VELOCITY_PARAM(flow_control, "Enable flow control ability"); + +#define MED_LNK_DEF 0 +#define MED_LNK_MIN 0 +#define MED_LNK_MAX 5 +/* speed_duplex[] is used for setting the speed and duplex mode of NIC. + 0: indicate autonegotiation for both speed and duplex mode + 1: indicate 100Mbps half duplex mode + 2: indicate 100Mbps full duplex mode + 3: indicate 10Mbps half duplex mode + 4: indicate 10Mbps full duplex mode + 5: indicate 1000Mbps full duplex mode + + Note: + if EEPROM have been set to the force mode, this option is ignored + by driver. +*/ +VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode"); + +#define VAL_PKT_LEN_DEF 0 +/* ValPktLen[] is used for setting the checksum offload ability of NIC. + 0: Receive frame with invalid layer 2 length (Default) + 1: Drop frame with invalid layer 2 length +*/ +VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame"); + +#define WOL_OPT_DEF 0 +#define WOL_OPT_MIN 0 +#define WOL_OPT_MAX 7 +/* wol_opts[] is used for controlling wake on lan behavior. + 0: Wake up if recevied a magic packet. (Default) + 1: Wake up if link status is on/off. + 2: Wake up if recevied an arp packet. + 4: Wake up if recevied any unicast packet. + Those value can be sumed up to support more than one option. +*/ +VELOCITY_PARAM(wol_opts, "Wake On Lan options"); + +static int rx_copybreak = 200; +module_param(rx_copybreak, int, 0644); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); + +/* + * Internal board variants. At the moment we have only one + */ +static struct velocity_info_tbl chip_info_table[] = { + {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL}, + { } +}; + +/* + * Describe the PCI device identifiers that we support in this + * device driver. Used for hotplug autoloading. + */ +static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, velocity_id_table); + +/** + * get_chip_name - identifier to name + * @id: chip identifier + * + * Given a chip identifier return a suitable description. Returns + * a pointer a static string valid while the driver is loaded. + */ +static const char __devinit *get_chip_name(enum chip_type chip_id) +{ + int i; + for (i = 0; chip_info_table[i].name != NULL; i++) + if (chip_info_table[i].chip_id == chip_id) + break; + return chip_info_table[i].name; +} + +/** + * velocity_remove1 - device unplug + * @pdev: PCI device being removed + * + * Device unload callback. Called on an unplug or on module + * unload for each active device that is present. Disconnects + * the device from the network layer and frees all the resources + */ +static void __devexit velocity_remove1(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = netdev_priv(dev); + + unregister_netdev(dev); + iounmap(vptr->mac_regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + + velocity_nics--; +} + +/** + * velocity_set_int_opt - parser for integer options + * @opt: pointer to option value + * @val: value the user requested (or -1 for default) + * @min: lowest value allowed + * @max: highest value allowed + * @def: default value + * @name: property name + * @dev: device name + * + * Set an integer property in the module options. This function does + * all the verification and checking as well as reporting so that + * we don't duplicate code for each option. + */ +static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname) +{ + if (val == -1) + *opt = def; + else if (val < min || val > max) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n", + devname, name, min, max); + *opt = def; + } else { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n", + devname, name, val); + *opt = val; + } +} + +/** + * velocity_set_bool_opt - parser for boolean options + * @opt: pointer to option value + * @val: value the user requested (or -1 for default) + * @def: default value (yes/no) + * @flag: numeric value to set for true. + * @name: property name + * @dev: device name + * + * Set a boolean property in the module options. This function does + * all the verification and checking as well as reporting so that + * we don't duplicate code for each option. + */ +static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname) +{ + (*opt) &= (~flag); + if (val == -1) + *opt |= (def ? flag : 0); + else if (val < 0 || val > 1) { + printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", + devname, name); + *opt |= (def ? flag : 0); + } else { + printk(KERN_INFO "%s: set parameter %s to %s\n", + devname, name, val ? "TRUE" : "FALSE"); + *opt |= (val ? flag : 0); + } +} + +/** + * velocity_get_options - set options on device + * @opts: option structure for the device + * @index: index of option to use in module options array + * @devname: device name + * + * Turn the module and command options into a single structure + * for the current device + */ +static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname) +{ + + velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); + velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname); + velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname); + velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname); + + velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname); + velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname); + velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname); + velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname); + velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname); + opts->numrx = (opts->numrx & ~3); +} + +/** + * velocity_init_cam_filter - initialise CAM + * @vptr: velocity to program + * + * Initialize the content addressable memory used for filters. Load + * appropriately according to the presence of VLAN + */ +static void velocity_init_cam_filter(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + unsigned int vid, i = 0; + + /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */ + WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG); + WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG); + + /* Disable all CAMs */ + memset(vptr->vCAMmask, 0, sizeof(u8) * 8); + memset(vptr->mCAMmask, 0, sizeof(u8) * 8); + mac_set_vlan_cam_mask(regs, vptr->vCAMmask); + mac_set_cam_mask(regs, vptr->mCAMmask); + + /* Enable VCAMs */ + + if (test_bit(0, vptr->active_vlans)) + WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); + + for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { + mac_set_vlan_cam(regs, i, (u8 *) &vid); + vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); + if (++i >= VCAM_SIZE) + break; + } + mac_set_vlan_cam_mask(regs, vptr->vCAMmask); +} + +static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct velocity_info *vptr = netdev_priv(dev); + + spin_lock_irq(&vptr->lock); + set_bit(vid, vptr->active_vlans); + velocity_init_cam_filter(vptr); + spin_unlock_irq(&vptr->lock); +} + +static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct velocity_info *vptr = netdev_priv(dev); + + spin_lock_irq(&vptr->lock); + clear_bit(vid, vptr->active_vlans); + velocity_init_cam_filter(vptr); + spin_unlock_irq(&vptr->lock); +} + +static void velocity_init_rx_ring_indexes(struct velocity_info *vptr) +{ + vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0; +} + +/** + * velocity_rx_reset - handle a receive reset + * @vptr: velocity we are resetting + * + * Reset the ownership and status for the receive ring side. + * Hand all the receive queue to the NIC. + */ +static void velocity_rx_reset(struct velocity_info *vptr) +{ + + struct mac_regs __iomem *regs = vptr->mac_regs; + int i; + + velocity_init_rx_ring_indexes(vptr); + + /* + * Init state, all RD entries belong to the NIC + */ + for (i = 0; i < vptr->options.numrx; ++i) + vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC; + + writew(vptr->options.numrx, ®s->RBRDU); + writel(vptr->rx.pool_dma, ®s->RDBaseLo); + writew(0, ®s->RDIdx); + writew(vptr->options.numrx - 1, ®s->RDCSize); +} + +/** + * velocity_get_opt_media_mode - get media selection + * @vptr: velocity adapter + * + * Get the media mode stored in EEPROM or module options and load + * mii_status accordingly. The requested link state information + * is also returned. + */ +static u32 velocity_get_opt_media_mode(struct velocity_info *vptr) +{ + u32 status = 0; + + switch (vptr->options.spd_dpx) { + case SPD_DPX_AUTO: + status = VELOCITY_AUTONEG_ENABLE; + break; + case SPD_DPX_100_FULL: + status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL; + break; + case SPD_DPX_10_FULL: + status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL; + break; + case SPD_DPX_100_HALF: + status = VELOCITY_SPEED_100; + break; + case SPD_DPX_10_HALF: + status = VELOCITY_SPEED_10; + break; + case SPD_DPX_1000_FULL: + status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL; + break; + } + vptr->mii_status = status; + return status; +} + +/** + * safe_disable_mii_autopoll - autopoll off + * @regs: velocity registers + * + * Turn off the autopoll and wait for it to disable on the chip + */ +static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs) +{ + u16 ww; + + /* turn off MAUTO */ + writeb(0, ®s->MIICR); + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + udelay(1); + if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } +} + +/** + * enable_mii_autopoll - turn on autopolling + * @regs: velocity registers + * + * Enable the MII link status autopoll feature on the Velocity + * hardware. Wait for it to enable. + */ +static void enable_mii_autopoll(struct mac_regs __iomem *regs) +{ + int ii; + + writeb(0, &(regs->MIICR)); + writeb(MIIADR_SWMPL, ®s->MIIADR); + + for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { + udelay(1); + if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } + + writeb(MIICR_MAUTO, ®s->MIICR); + + for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { + udelay(1); + if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) + break; + } + +} + +/** + * velocity_mii_read - read MII data + * @regs: velocity registers + * @index: MII register index + * @data: buffer for received data + * + * Perform a single read of an MII 16bit register. Returns zero + * on success or -ETIMEDOUT if the PHY did not respond. + */ +static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data) +{ + u16 ww; + + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ + safe_disable_mii_autopoll(regs); + + writeb(index, ®s->MIIADR); + + BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR); + + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + if (!(readb(®s->MIICR) & MIICR_RCMD)) + break; + } + + *data = readw(®s->MIIDATA); + + enable_mii_autopoll(regs); + if (ww == W_MAX_TIMEOUT) + return -ETIMEDOUT; + return 0; +} + +/** + * mii_check_media_mode - check media state + * @regs: velocity registers + * + * Check the current MII status and determine the link status + * accordingly + */ +static u32 mii_check_media_mode(struct mac_regs __iomem *regs) +{ + u32 status = 0; + u16 ANAR; + + if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs)) + status |= VELOCITY_LINK_FAIL; + + if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs)) + status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL; + else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs)) + status |= (VELOCITY_SPEED_1000); + else { + velocity_mii_read(regs, MII_ADVERTISE, &ANAR); + if (ANAR & ADVERTISE_100FULL) + status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL); + else if (ANAR & ADVERTISE_100HALF) + status |= VELOCITY_SPEED_100; + else if (ANAR & ADVERTISE_10FULL) + status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL); + else + status |= (VELOCITY_SPEED_10); + } + + if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) { + velocity_mii_read(regs, MII_ADVERTISE, &ANAR); + if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) + == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) { + if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs)) + status |= VELOCITY_AUTONEG_ENABLE; + } + } + + return status; +} + +/** + * velocity_mii_write - write MII data + * @regs: velocity registers + * @index: MII register index + * @data: 16bit data for the MII register + * + * Perform a single write to an MII 16bit register. Returns zero + * on success or -ETIMEDOUT if the PHY did not respond. + */ +static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data) +{ + u16 ww; + + /* + * Disable MIICR_MAUTO, so that mii addr can be set normally + */ + safe_disable_mii_autopoll(regs); + + /* MII reg offset */ + writeb(mii_addr, ®s->MIIADR); + /* set MII data */ + writew(data, ®s->MIIDATA); + + /* turn on MIICR_WCMD */ + BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR); + + /* W_MAX_TIMEOUT is the timeout period */ + for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { + udelay(5); + if (!(readb(®s->MIICR) & MIICR_WCMD)) + break; + } + enable_mii_autopoll(regs); + + if (ww == W_MAX_TIMEOUT) + return -ETIMEDOUT; + return 0; +} + +/** + * set_mii_flow_control - flow control setup + * @vptr: velocity interface + * + * Set up the flow control on this interface according to + * the supplied user/eeprom options. + */ +static void set_mii_flow_control(struct velocity_info *vptr) +{ + /*Enable or Disable PAUSE in ANAR */ + switch (vptr->options.flow_cntl) { + case FLOW_CNTL_TX: + MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); + MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); + break; + + case FLOW_CNTL_RX: + MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); + MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); + break; + + case FLOW_CNTL_TX_RX: + MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); + MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); + break; + + case FLOW_CNTL_DISABLE: + MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); + MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); + break; + default: + break; + } +} + +/** + * mii_set_auto_on - autonegotiate on + * @vptr: velocity + * + * Enable autonegotation on this interface + */ +static void mii_set_auto_on(struct velocity_info *vptr) +{ + if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs)) + MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs); + else + MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); +} + +static u32 check_connection_type(struct mac_regs __iomem *regs) +{ + u32 status = 0; + u8 PHYSR0; + u16 ANAR; + PHYSR0 = readb(®s->PHYSR0); + + /* + if (!(PHYSR0 & PHYSR0_LINKGD)) + status|=VELOCITY_LINK_FAIL; + */ + + if (PHYSR0 & PHYSR0_FDPX) + status |= VELOCITY_DUPLEX_FULL; + + if (PHYSR0 & PHYSR0_SPDG) + status |= VELOCITY_SPEED_1000; + else if (PHYSR0 & PHYSR0_SPD10) + status |= VELOCITY_SPEED_10; + else + status |= VELOCITY_SPEED_100; + + if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) { + velocity_mii_read(regs, MII_ADVERTISE, &ANAR); + if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) + == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) { + if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs)) + status |= VELOCITY_AUTONEG_ENABLE; + } + } + + return status; +} + +/** + * velocity_set_media_mode - set media mode + * @mii_status: old MII link state + * + * Check the media link state and configure the flow control + * PHY and also velocity hardware setup accordingly. In particular + * we need to set up CD polling and frame bursting. + */ +static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status) +{ + u32 curr_status; + struct mac_regs __iomem *regs = vptr->mac_regs; + + vptr->mii_status = mii_check_media_mode(vptr->mac_regs); + curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL); + + /* Set mii link status */ + set_mii_flow_control(vptr); + + /* + Check if new status is consistent with current status + if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) || + (mii_status==curr_status)) { + vptr->mii_status=mii_check_media_mode(vptr->mac_regs); + vptr->mii_status=check_connection_type(vptr->mac_regs); + VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n"); + return 0; + } + */ + + if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) + MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs); + + /* + * If connection type is AUTO + */ + if (mii_status & VELOCITY_AUTONEG_ENABLE) { + VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n"); + /* clear force MAC mode bit */ + BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR); + /* set duplex mode of MAC according to duplex mode of MII */ + MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs); + MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs); + MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); + + /* enable AUTO-NEGO mode */ + mii_set_auto_on(vptr); + } else { + u16 CTRL1000; + u16 ANAR; + u8 CHIPGCR; + + /* + * 1. if it's 3119, disable frame bursting in halfduplex mode + * and enable it in fullduplex mode + * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR + * 3. only enable CD heart beat counter in 10HD mode + */ + + /* set force MAC mode bit */ + BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); + + CHIPGCR = readb(®s->CHIPGCR); + + if (mii_status & VELOCITY_SPEED_1000) + CHIPGCR |= CHIPGCR_FCGMII; + else + CHIPGCR &= ~CHIPGCR_FCGMII; + + if (mii_status & VELOCITY_DUPLEX_FULL) { + CHIPGCR |= CHIPGCR_FCFDX; + writeb(CHIPGCR, ®s->CHIPGCR); + VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n"); + if (vptr->rev_id < REV_ID_VT3216_A0) + BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); + } else { + CHIPGCR &= ~CHIPGCR_FCFDX; + VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n"); + writeb(CHIPGCR, ®s->CHIPGCR); + if (vptr->rev_id < REV_ID_VT3216_A0) + BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); + } + + velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000); + CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if ((mii_status & VELOCITY_SPEED_1000) && + (mii_status & VELOCITY_DUPLEX_FULL)) { + CTRL1000 |= ADVERTISE_1000FULL; + } + velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000); + + if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10)) + BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); + else + BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); + + /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */ + velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR); + ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)); + if (mii_status & VELOCITY_SPEED_100) { + if (mii_status & VELOCITY_DUPLEX_FULL) + ANAR |= ADVERTISE_100FULL; + else + ANAR |= ADVERTISE_100HALF; + } else if (mii_status & VELOCITY_SPEED_10) { + if (mii_status & VELOCITY_DUPLEX_FULL) + ANAR |= ADVERTISE_10FULL; + else + ANAR |= ADVERTISE_10HALF; + } + velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR); + /* enable AUTO-NEGO mode */ + mii_set_auto_on(vptr); + /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */ + } + /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */ + /* vptr->mii_status=check_connection_type(vptr->mac_regs); */ + return VELOCITY_LINK_CHANGE; +} + +/** + * velocity_print_link_status - link status reporting + * @vptr: velocity to report on + * + * Turn the link status of the velocity card into a kernel log + * description of the new link state, detailing speed and duplex + * status + */ +static void velocity_print_link_status(struct velocity_info *vptr) +{ + + if (vptr->mii_status & VELOCITY_LINK_FAIL) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name); + } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name); + + if (vptr->mii_status & VELOCITY_SPEED_1000) + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps"); + else if (vptr->mii_status & VELOCITY_SPEED_100) + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps"); + else + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps"); + + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n"); + else + VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n"); + } else { + VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name); + switch (vptr->options.spd_dpx) { + case SPD_DPX_1000_FULL: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps full duplex\n"); + break; + case SPD_DPX_100_HALF: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n"); + break; + case SPD_DPX_100_FULL: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n"); + break; + case SPD_DPX_10_HALF: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n"); + break; + case SPD_DPX_10_FULL: + VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n"); + break; + default: + break; + } + } +} + +/** + * enable_flow_control_ability - flow control + * @vptr: veloity to configure + * + * Set up flow control according to the flow control options + * determined by the eeprom/configuration. + */ +static void enable_flow_control_ability(struct velocity_info *vptr) +{ + + struct mac_regs __iomem *regs = vptr->mac_regs; + + switch (vptr->options.flow_cntl) { + + case FLOW_CNTL_DEFAULT: + if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0)) + writel(CR0_FDXRFCEN, ®s->CR0Set); + else + writel(CR0_FDXRFCEN, ®s->CR0Clr); + + if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0)) + writel(CR0_FDXTFCEN, ®s->CR0Set); + else + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_TX: + writel(CR0_FDXTFCEN, ®s->CR0Set); + writel(CR0_FDXRFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_RX: + writel(CR0_FDXRFCEN, ®s->CR0Set); + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + case FLOW_CNTL_TX_RX: + writel(CR0_FDXTFCEN, ®s->CR0Set); + writel(CR0_FDXRFCEN, ®s->CR0Set); + break; + + case FLOW_CNTL_DISABLE: + writel(CR0_FDXRFCEN, ®s->CR0Clr); + writel(CR0_FDXTFCEN, ®s->CR0Clr); + break; + + default: + break; + } + +} + +/** + * velocity_soft_reset - soft reset + * @vptr: velocity to reset + * + * Kick off a soft reset of the velocity adapter and then poll + * until the reset sequence has completed before returning. + */ +static int velocity_soft_reset(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + int i = 0; + + writel(CR0_SFRST, ®s->CR0Set); + + for (i = 0; i < W_MAX_TIMEOUT; i++) { + udelay(5); + if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set)) + break; + } + + if (i == W_MAX_TIMEOUT) { + writel(CR0_FORSRST, ®s->CR0Set); + /* FIXME: PCI POSTING */ + /* delay 2ms */ + mdelay(2); + } + return 0; +} + +/** + * velocity_set_multi - filter list change callback + * @dev: network device + * + * Called by the network layer when the filter lists need to change + * for a velocity adapter. Reload the CAMs with the new address + * filter ruleset. + */ +static void velocity_set_multi(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + struct mac_regs __iomem *regs = vptr->mac_regs; + u8 rx_mode; + int i; + struct netdev_hw_addr *ha; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + writel(0xffffffff, ®s->MARCAM[0]); + writel(0xffffffff, ®s->MARCAM[4]); + rx_mode = (RCR_AM | RCR_AB | RCR_PROM); + } else if ((netdev_mc_count(dev) > vptr->multicast_limit) || + (dev->flags & IFF_ALLMULTI)) { + writel(0xffffffff, ®s->MARCAM[0]); + writel(0xffffffff, ®s->MARCAM[4]); + rx_mode = (RCR_AM | RCR_AB); + } else { + int offset = MCAM_SIZE - vptr->multicast_limit; + mac_get_cam_mask(regs, vptr->mCAMmask); + + i = 0; + netdev_for_each_mc_addr(ha, dev) { + mac_set_cam(regs, i + offset, ha->addr); + vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7); + i++; + } + + mac_set_cam_mask(regs, vptr->mCAMmask); + rx_mode = RCR_AM | RCR_AB | RCR_AP; + } + if (dev->mtu > 1500) + rx_mode |= RCR_AL; + + BYTE_REG_BITS_ON(rx_mode, ®s->RCR); + +} + +/* + * MII access , media link mode setting functions + */ + +/** + * mii_init - set up MII + * @vptr: velocity adapter + * @mii_status: links tatus + * + * Set up the PHY for the current link state. + */ +static void mii_init(struct velocity_info *vptr, u32 mii_status) +{ + u16 BMCR; + + switch (PHYID_GET_PHY_ID(vptr->phy_id)) { + case PHYID_CICADA_CS8201: + /* + * Reset to hardware default + */ + MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); + /* + * Turn on ECHODIS bit in NWay-forced full mode and turn it + * off it in NWay-forced half mode for NWay-forced v.s. + * legacy-forced issue. + */ + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); + else + MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); + /* + * Turn on Link/Activity LED enable bit for CIS8201 + */ + MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs); + break; + case PHYID_VT3216_32BIT: + case PHYID_VT3216_64BIT: + /* + * Reset to hardware default + */ + MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); + /* + * Turn on ECHODIS bit in NWay-forced full mode and turn it + * off it in NWay-forced half mode for NWay-forced v.s. + * legacy-forced issue + */ + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); + else + MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); + break; + + case PHYID_MARVELL_1000: + case PHYID_MARVELL_1000S: + /* + * Assert CRS on Transmit + */ + MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs); + /* + * Reset to hardware default + */ + MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); + break; + default: + ; + } + velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR); + if (BMCR & BMCR_ISOLATE) { + BMCR &= ~BMCR_ISOLATE; + velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR); + } +} + +/** + * setup_queue_timers - Setup interrupt timers + * + * Setup interrupt frequency during suppression (timeout if the frame + * count isn't filled). + */ +static void setup_queue_timers(struct velocity_info *vptr) +{ + /* Only for newer revisions */ + if (vptr->rev_id >= REV_ID_VT3216_A0) { + u8 txqueue_timer = 0; + u8 rxqueue_timer = 0; + + if (vptr->mii_status & (VELOCITY_SPEED_1000 | + VELOCITY_SPEED_100)) { + txqueue_timer = vptr->options.txqueue_timer; + rxqueue_timer = vptr->options.rxqueue_timer; + } + + writeb(txqueue_timer, &vptr->mac_regs->TQETMR); + writeb(rxqueue_timer, &vptr->mac_regs->RQETMR); + } +} + +/** + * setup_adaptive_interrupts - Setup interrupt suppression + * + * @vptr velocity adapter + * + * The velocity is able to suppress interrupt during high interrupt load. + * This function turns on that feature. + */ +static void setup_adaptive_interrupts(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + u16 tx_intsup = vptr->options.tx_intsup; + u16 rx_intsup = vptr->options.rx_intsup; + + /* Setup default interrupt mask (will be changed below) */ + vptr->int_mask = INT_MASK_DEF; + + /* Set Tx Interrupt Suppression Threshold */ + writeb(CAMCR_PS0, ®s->CAMCR); + if (tx_intsup != 0) { + vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I | + ISR_PTX2I | ISR_PTX3I); + writew(tx_intsup, ®s->ISRCTL); + } else + writew(ISRCTL_TSUPDIS, ®s->ISRCTL); + + /* Set Rx Interrupt Suppression Threshold */ + writeb(CAMCR_PS1, ®s->CAMCR); + if (rx_intsup != 0) { + vptr->int_mask &= ~ISR_PRXI; + writew(rx_intsup, ®s->ISRCTL); + } else + writew(ISRCTL_RSUPDIS, ®s->ISRCTL); + + /* Select page to interrupt hold timer */ + writeb(0, ®s->CAMCR); +} + +/** + * velocity_init_registers - initialise MAC registers + * @vptr: velocity to init + * @type: type of initialisation (hot or cold) + * + * Initialise the MAC on a reset or on first set up on the + * hardware. + */ +static void velocity_init_registers(struct velocity_info *vptr, + enum velocity_init_type type) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + int i, mii_status; + + mac_wol_reset(regs); + + switch (type) { + case VELOCITY_INIT_RESET: + case VELOCITY_INIT_WOL: + + netif_stop_queue(vptr->dev); + + /* + * Reset RX to prevent RX pointer not on the 4X location + */ + velocity_rx_reset(vptr); + mac_rx_queue_run(regs); + mac_rx_queue_wake(regs); + + mii_status = velocity_get_opt_media_mode(vptr); + if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { + velocity_print_link_status(vptr); + if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) + netif_wake_queue(vptr->dev); + } + + enable_flow_control_ability(vptr); + + mac_clear_isr(regs); + writel(CR0_STOP, ®s->CR0Clr); + writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), + ®s->CR0Set); + + break; + + case VELOCITY_INIT_COLD: + default: + /* + * Do reset + */ + velocity_soft_reset(vptr); + mdelay(5); + + mac_eeprom_reload(regs); + for (i = 0; i < 6; i++) + writeb(vptr->dev->dev_addr[i], &(regs->PAR[i])); + + /* + * clear Pre_ACPI bit. + */ + BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA)); + mac_set_rx_thresh(regs, vptr->options.rx_thresh); + mac_set_dma_length(regs, vptr->options.DMA_length); + + writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet); + /* + * Back off algorithm use original IEEE standard + */ + BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB); + + /* + * Init CAM filter + */ + velocity_init_cam_filter(vptr); + + /* + * Set packet filter: Receive directed and broadcast address + */ + velocity_set_multi(vptr->dev); + + /* + * Enable MII auto-polling + */ + enable_mii_autopoll(regs); + + setup_adaptive_interrupts(vptr); + + writel(vptr->rx.pool_dma, ®s->RDBaseLo); + writew(vptr->options.numrx - 1, ®s->RDCSize); + mac_rx_queue_run(regs); + mac_rx_queue_wake(regs); + + writew(vptr->options.numtx - 1, ®s->TDCSize); + + for (i = 0; i < vptr->tx.numq; i++) { + writel(vptr->tx.pool_dma[i], ®s->TDBaseLo[i]); + mac_tx_queue_run(regs, i); + } + + init_flow_control_register(vptr); + + writel(CR0_STOP, ®s->CR0Clr); + writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set); + + mii_status = velocity_get_opt_media_mode(vptr); + netif_stop_queue(vptr->dev); + + mii_init(vptr, mii_status); + + if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { + velocity_print_link_status(vptr); + if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) + netif_wake_queue(vptr->dev); + } + + enable_flow_control_ability(vptr); + mac_hw_mibs_init(regs); + mac_write_int_mask(vptr->int_mask, regs); + mac_clear_isr(regs); + + } +} + +static void velocity_give_many_rx_descs(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + int avail, dirty, unusable; + + /* + * RD number must be equal to 4X per hardware spec + * (programming guide rev 1.20, p.13) + */ + if (vptr->rx.filled < 4) + return; + + wmb(); + + unusable = vptr->rx.filled & 0x0003; + dirty = vptr->rx.dirty - unusable; + for (avail = vptr->rx.filled & 0xfffc; avail; avail--) { + dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; + vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC; + } + + writew(vptr->rx.filled & 0xfffc, ®s->RBRDU); + vptr->rx.filled = unusable; +} + +/** + * velocity_init_dma_rings - set up DMA rings + * @vptr: Velocity to set up + * + * Allocate PCI mapped DMA rings for the receive and transmit layer + * to use. + */ +static int velocity_init_dma_rings(struct velocity_info *vptr) +{ + struct velocity_opt *opt = &vptr->options; + const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc); + const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc); + struct pci_dev *pdev = vptr->pdev; + dma_addr_t pool_dma; + void *pool; + unsigned int i; + + /* + * Allocate all RD/TD rings a single pool. + * + * pci_alloc_consistent() fulfills the requirement for 64 bytes + * alignment + */ + pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq + + rx_ring_size, &pool_dma); + if (!pool) { + dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n", + vptr->dev->name); + return -ENOMEM; + } + + vptr->rx.ring = pool; + vptr->rx.pool_dma = pool_dma; + + pool += rx_ring_size; + pool_dma += rx_ring_size; + + for (i = 0; i < vptr->tx.numq; i++) { + vptr->tx.rings[i] = pool; + vptr->tx.pool_dma[i] = pool_dma; + pool += tx_ring_size; + pool_dma += tx_ring_size; + } + + return 0; +} + +static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu) +{ + vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32; +} + +/** + * velocity_alloc_rx_buf - allocate aligned receive buffer + * @vptr: velocity + * @idx: ring index + * + * Allocate a new full sized buffer for the reception of a frame and + * map it into PCI space for the hardware to use. The hardware + * requires *64* byte alignment of the buffer which makes life + * less fun than would be ideal. + */ +static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) +{ + struct rx_desc *rd = &(vptr->rx.ring[idx]); + struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); + + rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64); + if (rd_info->skb == NULL) + return -ENOMEM; + + /* + * Do the gymnastics to get the buffer head for data at + * 64byte alignment. + */ + skb_reserve(rd_info->skb, + 64 - ((unsigned long) rd_info->skb->data & 63)); + rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, + vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); + + /* + * Fill in the descriptor to match + */ + + *((u32 *) & (rd->rdesc0)) = 0; + rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN; + rd->pa_low = cpu_to_le32(rd_info->skb_dma); + rd->pa_high = 0; + return 0; +} + + +static int velocity_rx_refill(struct velocity_info *vptr) +{ + int dirty = vptr->rx.dirty, done = 0; + + do { + struct rx_desc *rd = vptr->rx.ring + dirty; + + /* Fine for an all zero Rx desc at init time as well */ + if (rd->rdesc0.len & OWNED_BY_NIC) + break; + + if (!vptr->rx.info[dirty].skb) { + if (velocity_alloc_rx_buf(vptr, dirty) < 0) + break; + } + done++; + dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0; + } while (dirty != vptr->rx.curr); + + if (done) { + vptr->rx.dirty = dirty; + vptr->rx.filled += done; + } + + return done; +} + +/** + * velocity_free_rd_ring - free receive ring + * @vptr: velocity to clean up + * + * Free the receive buffers for each ring slot and any + * attached socket buffers that need to go away. + */ +static void velocity_free_rd_ring(struct velocity_info *vptr) +{ + int i; + + if (vptr->rx.info == NULL) + return; + + for (i = 0; i < vptr->options.numrx; i++) { + struct velocity_rd_info *rd_info = &(vptr->rx.info[i]); + struct rx_desc *rd = vptr->rx.ring + i; + + memset(rd, 0, sizeof(*rd)); + + if (!rd_info->skb) + continue; + pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, + PCI_DMA_FROMDEVICE); + rd_info->skb_dma = 0; + + dev_kfree_skb(rd_info->skb); + rd_info->skb = NULL; + } + + kfree(vptr->rx.info); + vptr->rx.info = NULL; +} + +/** + * velocity_init_rd_ring - set up receive ring + * @vptr: velocity to configure + * + * Allocate and set up the receive buffers for each ring slot and + * assign them to the network adapter. + */ +static int velocity_init_rd_ring(struct velocity_info *vptr) +{ + int ret = -ENOMEM; + + vptr->rx.info = kcalloc(vptr->options.numrx, + sizeof(struct velocity_rd_info), GFP_KERNEL); + if (!vptr->rx.info) + goto out; + + velocity_init_rx_ring_indexes(vptr); + + if (velocity_rx_refill(vptr) != vptr->options.numrx) { + VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR + "%s: failed to allocate RX buffer.\n", vptr->dev->name); + velocity_free_rd_ring(vptr); + goto out; + } + + ret = 0; +out: + return ret; +} + +/** + * velocity_init_td_ring - set up transmit ring + * @vptr: velocity + * + * Set up the transmit ring and chain the ring pointers together. + * Returns zero on success or a negative posix errno code for + * failure. + */ +static int velocity_init_td_ring(struct velocity_info *vptr) +{ + int j; + + /* Init the TD ring entries */ + for (j = 0; j < vptr->tx.numq; j++) { + + vptr->tx.infos[j] = kcalloc(vptr->options.numtx, + sizeof(struct velocity_td_info), + GFP_KERNEL); + if (!vptr->tx.infos[j]) { + while (--j >= 0) + kfree(vptr->tx.infos[j]); + return -ENOMEM; + } + + vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0; + } + return 0; +} + +/** + * velocity_free_dma_rings - free PCI ring pointers + * @vptr: Velocity to free from + * + * Clean up the PCI ring buffers allocated to this velocity. + */ +static void velocity_free_dma_rings(struct velocity_info *vptr) +{ + const int size = vptr->options.numrx * sizeof(struct rx_desc) + + vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq; + + pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma); +} + +static int velocity_init_rings(struct velocity_info *vptr, int mtu) +{ + int ret; + + velocity_set_rxbufsize(vptr, mtu); + + ret = velocity_init_dma_rings(vptr); + if (ret < 0) + goto out; + + ret = velocity_init_rd_ring(vptr); + if (ret < 0) + goto err_free_dma_rings_0; + + ret = velocity_init_td_ring(vptr); + if (ret < 0) + goto err_free_rd_ring_1; +out: + return ret; + +err_free_rd_ring_1: + velocity_free_rd_ring(vptr); +err_free_dma_rings_0: + velocity_free_dma_rings(vptr); + goto out; +} + +/** + * velocity_free_tx_buf - free transmit buffer + * @vptr: velocity + * @tdinfo: buffer + * + * Release an transmit buffer. If the buffer was preallocated then + * recycle it, if not then unmap the buffer. + */ +static void velocity_free_tx_buf(struct velocity_info *vptr, + struct velocity_td_info *tdinfo, struct tx_desc *td) +{ + struct sk_buff *skb = tdinfo->skb; + + /* + * Don't unmap the pre-allocated tx_bufs + */ + if (tdinfo->skb_dma) { + int i; + + for (i = 0; i < tdinfo->nskb_dma; i++) { + size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN); + + /* For scatter-gather */ + if (skb_shinfo(skb)->nr_frags > 0) + pktlen = max_t(size_t, pktlen, + td->td_buf[i].size & ~TD_QUEUE); + + pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], + le16_to_cpu(pktlen), PCI_DMA_TODEVICE); + } + } + dev_kfree_skb_irq(skb); + tdinfo->skb = NULL; +} + +/* + * FIXME: could we merge this with velocity_free_tx_buf ? + */ +static void velocity_free_td_ring_entry(struct velocity_info *vptr, + int q, int n) +{ + struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]); + int i; + + if (td_info == NULL) + return; + + if (td_info->skb) { + for (i = 0; i < td_info->nskb_dma; i++) { + if (td_info->skb_dma[i]) { + pci_unmap_single(vptr->pdev, td_info->skb_dma[i], + td_info->skb->len, PCI_DMA_TODEVICE); + td_info->skb_dma[i] = 0; + } + } + dev_kfree_skb(td_info->skb); + td_info->skb = NULL; + } +} + +/** + * velocity_free_td_ring - free td ring + * @vptr: velocity + * + * Free up the transmit ring for this particular velocity adapter. + * We free the ring contents but not the ring itself. + */ +static void velocity_free_td_ring(struct velocity_info *vptr) +{ + int i, j; + + for (j = 0; j < vptr->tx.numq; j++) { + if (vptr->tx.infos[j] == NULL) + continue; + for (i = 0; i < vptr->options.numtx; i++) + velocity_free_td_ring_entry(vptr, j, i); + + kfree(vptr->tx.infos[j]); + vptr->tx.infos[j] = NULL; + } +} + +static void velocity_free_rings(struct velocity_info *vptr) +{ + velocity_free_td_ring(vptr); + velocity_free_rd_ring(vptr); + velocity_free_dma_rings(vptr); +} + +/** + * velocity_error - handle error from controller + * @vptr: velocity + * @status: card status + * + * Process an error report from the hardware and attempt to recover + * the card itself. At the moment we cannot recover from some + * theoretically impossible errors but this could be fixed using + * the pci_device_failed logic to bounce the hardware + * + */ +static void velocity_error(struct velocity_info *vptr, int status) +{ + + if (status & ISR_TXSTLI) { + struct mac_regs __iomem *regs = vptr->mac_regs; + + printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0])); + BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR); + writew(TRDCSR_RUN, ®s->TDCSRClr); + netif_stop_queue(vptr->dev); + + /* FIXME: port over the pci_device_failed code and use it + here */ + } + + if (status & ISR_SRCI) { + struct mac_regs __iomem *regs = vptr->mac_regs; + int linked; + + if (vptr->options.spd_dpx == SPD_DPX_AUTO) { + vptr->mii_status = check_connection_type(regs); + + /* + * If it is a 3119, disable frame bursting in + * halfduplex mode and enable it in fullduplex + * mode + */ + if (vptr->rev_id < REV_ID_VT3216_A0) { + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) + BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); + else + BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); + } + /* + * Only enable CD heart beat counter in 10HD mode + */ + if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10)) + BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); + else + BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); + + setup_queue_timers(vptr); + } + /* + * Get link status from PHYSR0 + */ + linked = readb(®s->PHYSR0) & PHYSR0_LINKGD; + + if (linked) { + vptr->mii_status &= ~VELOCITY_LINK_FAIL; + netif_carrier_on(vptr->dev); + } else { + vptr->mii_status |= VELOCITY_LINK_FAIL; + netif_carrier_off(vptr->dev); + } + + velocity_print_link_status(vptr); + enable_flow_control_ability(vptr); + + /* + * Re-enable auto-polling because SRCI will disable + * auto-polling + */ + + enable_mii_autopoll(regs); + + if (vptr->mii_status & VELOCITY_LINK_FAIL) + netif_stop_queue(vptr->dev); + else + netif_wake_queue(vptr->dev); + + } + if (status & ISR_MIBFI) + velocity_update_hw_mibs(vptr); + if (status & ISR_LSTEI) + mac_rx_queue_wake(vptr->mac_regs); +} + +/** + * tx_srv - transmit interrupt service + * @vptr; Velocity + * + * Scan the queues looking for transmitted packets that + * we can complete and clean up. Update any statistics as + * necessary/ + */ +static int velocity_tx_srv(struct velocity_info *vptr) +{ + struct tx_desc *td; + int qnum; + int full = 0; + int idx; + int works = 0; + struct velocity_td_info *tdinfo; + struct net_device_stats *stats = &vptr->dev->stats; + + for (qnum = 0; qnum < vptr->tx.numq; qnum++) { + for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0; + idx = (idx + 1) % vptr->options.numtx) { + + /* + * Get Tx Descriptor + */ + td = &(vptr->tx.rings[qnum][idx]); + tdinfo = &(vptr->tx.infos[qnum][idx]); + + if (td->tdesc0.len & OWNED_BY_NIC) + break; + + if ((works++ > 15)) + break; + + if (td->tdesc0.TSR & TSR0_TERR) { + stats->tx_errors++; + stats->tx_dropped++; + if (td->tdesc0.TSR & TSR0_CDH) + stats->tx_heartbeat_errors++; + if (td->tdesc0.TSR & TSR0_CRS) + stats->tx_carrier_errors++; + if (td->tdesc0.TSR & TSR0_ABT) + stats->tx_aborted_errors++; + if (td->tdesc0.TSR & TSR0_OWC) + stats->tx_window_errors++; + } else { + stats->tx_packets++; + stats->tx_bytes += tdinfo->skb->len; + } + velocity_free_tx_buf(vptr, tdinfo, td); + vptr->tx.used[qnum]--; + } + vptr->tx.tail[qnum] = idx; + + if (AVAIL_TD(vptr, qnum) < 1) + full = 1; + } + /* + * Look to see if we should kick the transmit network + * layer for more work. + */ + if (netif_queue_stopped(vptr->dev) && (full == 0) && + (!(vptr->mii_status & VELOCITY_LINK_FAIL))) { + netif_wake_queue(vptr->dev); + } + return works; +} + +/** + * velocity_rx_csum - checksum process + * @rd: receive packet descriptor + * @skb: network layer packet buffer + * + * Process the status bits for the received packet and determine + * if the checksum was computed and verified by the hardware + */ +static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) +{ + skb_checksum_none_assert(skb); + + if (rd->rdesc1.CSM & CSM_IPKT) { + if (rd->rdesc1.CSM & CSM_IPOK) { + if ((rd->rdesc1.CSM & CSM_TCPKT) || + (rd->rdesc1.CSM & CSM_UDPKT)) { + if (!(rd->rdesc1.CSM & CSM_TUPOK)) + return; + } + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + } +} + +/** + * velocity_rx_copy - in place Rx copy for small packets + * @rx_skb: network layer packet buffer candidate + * @pkt_size: received data size + * @rd: receive packet descriptor + * @dev: network device + * + * Replace the current skb that is scheduled for Rx processing by a + * shorter, immediately allocated skb, if the received packet is small + * enough. This function returns a negative value if the received + * packet is too big or if memory is exhausted. + */ +static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size, + struct velocity_info *vptr) +{ + int ret = -1; + if (pkt_size < rx_copybreak) { + struct sk_buff *new_skb; + + new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size); + if (new_skb) { + new_skb->ip_summed = rx_skb[0]->ip_summed; + skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size); + *rx_skb = new_skb; + ret = 0; + } + + } + return ret; +} + +/** + * velocity_iph_realign - IP header alignment + * @vptr: velocity we are handling + * @skb: network layer packet buffer + * @pkt_size: received data size + * + * Align IP header on a 2 bytes boundary. This behavior can be + * configured by the user. + */ +static inline void velocity_iph_realign(struct velocity_info *vptr, + struct sk_buff *skb, int pkt_size) +{ + if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) { + memmove(skb->data + 2, skb->data, pkt_size); + skb_reserve(skb, 2); + } +} + +/** + * velocity_receive_frame - received packet processor + * @vptr: velocity we are handling + * @idx: ring index + * + * A packet has arrived. We process the packet and if appropriate + * pass the frame up the network stack + */ +static int velocity_receive_frame(struct velocity_info *vptr, int idx) +{ + void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); + struct net_device_stats *stats = &vptr->dev->stats; + struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); + struct rx_desc *rd = &(vptr->rx.ring[idx]); + int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff; + struct sk_buff *skb; + + if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { + VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name); + stats->rx_length_errors++; + return -EINVAL; + } + + if (rd->rdesc0.RSR & RSR_MAR) + stats->multicast++; + + skb = rd_info->skb; + + pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma, + vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); + + /* + * Drop frame not meeting IEEE 802.3 + */ + + if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) { + if (rd->rdesc0.RSR & RSR_RL) { + stats->rx_length_errors++; + return -EINVAL; + } + } + + pci_action = pci_dma_sync_single_for_device; + + velocity_rx_csum(rd, skb); + + if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) { + velocity_iph_realign(vptr, skb, pkt_len); + pci_action = pci_unmap_single; + rd_info->skb = NULL; + } + + pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, + PCI_DMA_FROMDEVICE); + + skb_put(skb, pkt_len - 4); + skb->protocol = eth_type_trans(skb, vptr->dev); + + if (rd->rdesc0.RSR & RSR_DETAG) { + u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG)); + + __vlan_hwaccel_put_tag(skb, vid); + } + netif_rx(skb); + + stats->rx_bytes += pkt_len; + stats->rx_packets++; + + return 0; +} + +/** + * velocity_rx_srv - service RX interrupt + * @vptr: velocity + * + * Walk the receive ring of the velocity adapter and remove + * any received packets from the receive queue. Hand the ring + * slots back to the adapter for reuse. + */ +static int velocity_rx_srv(struct velocity_info *vptr, int budget_left) +{ + struct net_device_stats *stats = &vptr->dev->stats; + int rd_curr = vptr->rx.curr; + int works = 0; + + while (works < budget_left) { + struct rx_desc *rd = vptr->rx.ring + rd_curr; + + if (!vptr->rx.info[rd_curr].skb) + break; + + if (rd->rdesc0.len & OWNED_BY_NIC) + break; + + rmb(); + + /* + * Don't drop CE or RL error frame although RXOK is off + */ + if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) { + if (velocity_receive_frame(vptr, rd_curr) < 0) + stats->rx_dropped++; + } else { + if (rd->rdesc0.RSR & RSR_CRC) + stats->rx_crc_errors++; + if (rd->rdesc0.RSR & RSR_FAE) + stats->rx_frame_errors++; + + stats->rx_dropped++; + } + + rd->size |= RX_INTEN; + + rd_curr++; + if (rd_curr >= vptr->options.numrx) + rd_curr = 0; + works++; + } + + vptr->rx.curr = rd_curr; + + if ((works > 0) && (velocity_rx_refill(vptr) > 0)) + velocity_give_many_rx_descs(vptr); + + VAR_USED(stats); + return works; +} + +static int velocity_poll(struct napi_struct *napi, int budget) +{ + struct velocity_info *vptr = container_of(napi, + struct velocity_info, napi); + unsigned int rx_done; + unsigned long flags; + + spin_lock_irqsave(&vptr->lock, flags); + /* + * Do rx and tx twice for performance (taken from the VIA + * out-of-tree driver). + */ + rx_done = velocity_rx_srv(vptr, budget / 2); + velocity_tx_srv(vptr); + rx_done += velocity_rx_srv(vptr, budget - rx_done); + velocity_tx_srv(vptr); + + /* If budget not fully consumed, exit the polling mode */ + if (rx_done < budget) { + napi_complete(napi); + mac_enable_int(vptr->mac_regs); + } + spin_unlock_irqrestore(&vptr->lock, flags); + + return rx_done; +} + +/** + * velocity_intr - interrupt callback + * @irq: interrupt number + * @dev_instance: interrupting device + * + * Called whenever an interrupt is generated by the velocity + * adapter IRQ line. We may not be the source of the interrupt + * and need to identify initially if we are, and if not exit as + * efficiently as possible. + */ +static irqreturn_t velocity_intr(int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct velocity_info *vptr = netdev_priv(dev); + u32 isr_status; + + spin_lock(&vptr->lock); + isr_status = mac_read_isr(vptr->mac_regs); + + /* Not us ? */ + if (isr_status == 0) { + spin_unlock(&vptr->lock); + return IRQ_NONE; + } + + /* Ack the interrupt */ + mac_write_isr(vptr->mac_regs, isr_status); + + if (likely(napi_schedule_prep(&vptr->napi))) { + mac_disable_int(vptr->mac_regs); + __napi_schedule(&vptr->napi); + } + + if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) + velocity_error(vptr, isr_status); + + spin_unlock(&vptr->lock); + + return IRQ_HANDLED; +} + +/** + * velocity_open - interface activation callback + * @dev: network layer device to open + * + * Called when the network layer brings the interface up. Returns + * a negative posix error code on failure, or zero on success. + * + * All the ring allocation and set up is done on open for this + * adapter to minimise memory usage when inactive + */ +static int velocity_open(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + int ret; + + ret = velocity_init_rings(vptr, dev->mtu); + if (ret < 0) + goto out; + + /* Ensure chip is running */ + pci_set_power_state(vptr->pdev, PCI_D0); + + velocity_init_registers(vptr, VELOCITY_INIT_COLD); + + ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED, + dev->name, dev); + if (ret < 0) { + /* Power down the chip */ + pci_set_power_state(vptr->pdev, PCI_D3hot); + velocity_free_rings(vptr); + goto out; + } + + velocity_give_many_rx_descs(vptr); + + mac_enable_int(vptr->mac_regs); + netif_start_queue(dev); + napi_enable(&vptr->napi); + vptr->flags |= VELOCITY_FLAGS_OPENED; +out: + return ret; +} + +/** + * velocity_shutdown - shut down the chip + * @vptr: velocity to deactivate + * + * Shuts down the internal operations of the velocity and + * disables interrupts, autopolling, transmit and receive + */ +static void velocity_shutdown(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + mac_disable_int(regs); + writel(CR0_STOP, ®s->CR0Set); + writew(0xFFFF, ®s->TDCSRClr); + writeb(0xFF, ®s->RDCSRClr); + safe_disable_mii_autopoll(regs); + mac_clear_isr(regs); +} + +/** + * velocity_change_mtu - MTU change callback + * @dev: network device + * @new_mtu: desired MTU + * + * Handle requests from the networking layer for MTU change on + * this interface. It gets called on a change by the network layer. + * Return zero for success or negative posix error code. + */ +static int velocity_change_mtu(struct net_device *dev, int new_mtu) +{ + struct velocity_info *vptr = netdev_priv(dev); + int ret = 0; + + if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) { + VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n", + vptr->dev->name); + ret = -EINVAL; + goto out_0; + } + + if (!netif_running(dev)) { + dev->mtu = new_mtu; + goto out_0; + } + + if (dev->mtu != new_mtu) { + struct velocity_info *tmp_vptr; + unsigned long flags; + struct rx_info rx; + struct tx_info tx; + + tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL); + if (!tmp_vptr) { + ret = -ENOMEM; + goto out_0; + } + + tmp_vptr->dev = dev; + tmp_vptr->pdev = vptr->pdev; + tmp_vptr->options = vptr->options; + tmp_vptr->tx.numq = vptr->tx.numq; + + ret = velocity_init_rings(tmp_vptr, new_mtu); + if (ret < 0) + goto out_free_tmp_vptr_1; + + spin_lock_irqsave(&vptr->lock, flags); + + netif_stop_queue(dev); + velocity_shutdown(vptr); + + rx = vptr->rx; + tx = vptr->tx; + + vptr->rx = tmp_vptr->rx; + vptr->tx = tmp_vptr->tx; + + tmp_vptr->rx = rx; + tmp_vptr->tx = tx; + + dev->mtu = new_mtu; + + velocity_init_registers(vptr, VELOCITY_INIT_COLD); + + velocity_give_many_rx_descs(vptr); + + mac_enable_int(vptr->mac_regs); + netif_start_queue(dev); + + spin_unlock_irqrestore(&vptr->lock, flags); + + velocity_free_rings(tmp_vptr); + +out_free_tmp_vptr_1: + kfree(tmp_vptr); + } +out_0: + return ret; +} + +/** + * velocity_mii_ioctl - MII ioctl handler + * @dev: network device + * @ifr: the ifreq block for the ioctl + * @cmd: the command + * + * Process MII requests made via ioctl from the network layer. These + * are used by tools like kudzu to interrogate the link state of the + * hardware + */ +static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + struct mac_regs __iomem *regs = vptr->mac_regs; + unsigned long flags; + struct mii_ioctl_data *miidata = if_mii(ifr); + int err; + + switch (cmd) { + case SIOCGMIIPHY: + miidata->phy_id = readb(®s->MIIADR) & 0x1f; + break; + case SIOCGMIIREG: + if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0) + return -ETIMEDOUT; + break; + case SIOCSMIIREG: + spin_lock_irqsave(&vptr->lock, flags); + err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in); + spin_unlock_irqrestore(&vptr->lock, flags); + check_connection_type(vptr->mac_regs); + if (err) + return err; + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +/** + * velocity_ioctl - ioctl entry point + * @dev: network device + * @rq: interface request ioctl + * @cmd: command code + * + * Called when the user issues an ioctl request to the network + * device in question. The velocity interface supports MII. + */ +static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + int ret; + + /* If we are asked for information and the device is power + saving then we need to bring the device back up to talk to it */ + + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D0); + + switch (cmd) { + case SIOCGMIIPHY: /* Get address of MII PHY in use. */ + case SIOCGMIIREG: /* Read MII PHY register. */ + case SIOCSMIIREG: /* Write to MII PHY register. */ + ret = velocity_mii_ioctl(dev, rq, cmd); + break; + + default: + ret = -EOPNOTSUPP; + } + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D3hot); + + + return ret; +} + +/** + * velocity_get_status - statistics callback + * @dev: network device + * + * Callback from the network layer to allow driver statistics + * to be resynchronized with hardware collected state. In the + * case of the velocity we need to pull the MIB counters from + * the hardware into the counters before letting the network + * layer display them. + */ +static struct net_device_stats *velocity_get_stats(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + + /* If the hardware is down, don't touch MII */ + if (!netif_running(dev)) + return &dev->stats; + + spin_lock_irq(&vptr->lock); + velocity_update_hw_mibs(vptr); + spin_unlock_irq(&vptr->lock); + + dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts]; + dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts]; + dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors]; + +// unsigned long rx_dropped; /* no space in linux buffers */ + dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions]; + /* detailed rx_errors: */ +// unsigned long rx_length_errors; +// unsigned long rx_over_errors; /* receiver ring buff overflow */ + dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE]; +// unsigned long rx_frame_errors; /* recv'd frame alignment error */ +// unsigned long rx_fifo_errors; /* recv'r fifo overrun */ +// unsigned long rx_missed_errors; /* receiver missed packet */ + + /* detailed tx_errors */ +// unsigned long tx_fifo_errors; + + return &dev->stats; +} + +/** + * velocity_close - close adapter callback + * @dev: network device + * + * Callback from the network layer when the velocity is being + * deactivated by the network layer + */ +static int velocity_close(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + + napi_disable(&vptr->napi); + netif_stop_queue(dev); + velocity_shutdown(vptr); + + if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) + velocity_get_ip(vptr); + if (dev->irq != 0) + free_irq(dev->irq, dev); + + /* Power down the chip */ + pci_set_power_state(vptr->pdev, PCI_D3hot); + + velocity_free_rings(vptr); + + vptr->flags &= (~VELOCITY_FLAGS_OPENED); + return 0; +} + +/** + * velocity_xmit - transmit packet callback + * @skb: buffer to transmit + * @dev: network device + * + * Called by the networ layer to request a packet is queued to + * the velocity. Returns zero on success. + */ +static netdev_tx_t velocity_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + int qnum = 0; + struct tx_desc *td_ptr; + struct velocity_td_info *tdinfo; + unsigned long flags; + int pktlen; + int index, prev; + int i = 0; + + if (skb_padto(skb, ETH_ZLEN)) + goto out; + + /* The hardware can handle at most 7 memory segments, so merge + * the skb if there are more */ + if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) { + kfree_skb(skb); + return NETDEV_TX_OK; + } + + pktlen = skb_shinfo(skb)->nr_frags == 0 ? + max_t(unsigned int, skb->len, ETH_ZLEN) : + skb_headlen(skb); + + spin_lock_irqsave(&vptr->lock, flags); + + index = vptr->tx.curr[qnum]; + td_ptr = &(vptr->tx.rings[qnum][index]); + tdinfo = &(vptr->tx.infos[qnum][index]); + + td_ptr->tdesc1.TCR = TCR0_TIC; + td_ptr->td_buf[0].size &= ~TD_QUEUE; + + /* + * Map the linear network buffer into PCI space and + * add it to the transmit ring. + */ + tdinfo->skb = skb; + tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE); + td_ptr->tdesc0.len = cpu_to_le16(pktlen); + td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->td_buf[0].pa_high = 0; + td_ptr->td_buf[0].size = cpu_to_le16(pktlen); + + /* Handle fragments */ + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + tdinfo->skb_dma[i + 1] = pci_map_page(vptr->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + + td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]); + td_ptr->td_buf[i + 1].pa_high = 0; + td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size); + } + tdinfo->nskb_dma = i + 1; + + td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16; + + if (vlan_tx_tag_present(skb)) { + td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb)); + td_ptr->tdesc1.TCR |= TCR0_VETAG; + } + + /* + * Handle hardware checksum + */ + if (skb->ip_summed == CHECKSUM_PARTIAL) { + const struct iphdr *ip = ip_hdr(skb); + if (ip->protocol == IPPROTO_TCP) + td_ptr->tdesc1.TCR |= TCR0_TCPCK; + else if (ip->protocol == IPPROTO_UDP) + td_ptr->tdesc1.TCR |= (TCR0_UDPCK); + td_ptr->tdesc1.TCR |= TCR0_IPCK; + } + + prev = index - 1; + if (prev < 0) + prev = vptr->options.numtx - 1; + td_ptr->tdesc0.len |= OWNED_BY_NIC; + vptr->tx.used[qnum]++; + vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx; + + if (AVAIL_TD(vptr, qnum) < 1) + netif_stop_queue(dev); + + td_ptr = &(vptr->tx.rings[qnum][prev]); + td_ptr->td_buf[0].size |= TD_QUEUE; + mac_tx_queue_wake(vptr->mac_regs, qnum); + + spin_unlock_irqrestore(&vptr->lock, flags); +out: + return NETDEV_TX_OK; +} + +static const struct net_device_ops velocity_netdev_ops = { + .ndo_open = velocity_open, + .ndo_stop = velocity_close, + .ndo_start_xmit = velocity_xmit, + .ndo_get_stats = velocity_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_set_multicast_list = velocity_set_multi, + .ndo_change_mtu = velocity_change_mtu, + .ndo_do_ioctl = velocity_ioctl, + .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid, +}; + +/** + * velocity_init_info - init private data + * @pdev: PCI device + * @vptr: Velocity info + * @info: Board type + * + * Set up the initial velocity_info struct for the device that has been + * discovered. + */ +static void __devinit velocity_init_info(struct pci_dev *pdev, + struct velocity_info *vptr, + const struct velocity_info_tbl *info) +{ + memset(vptr, 0, sizeof(struct velocity_info)); + + vptr->pdev = pdev; + vptr->chip_id = info->chip_id; + vptr->tx.numq = info->txqueue; + vptr->multicast_limit = MCAM_SIZE; + spin_lock_init(&vptr->lock); +} + +/** + * velocity_get_pci_info - retrieve PCI info for device + * @vptr: velocity device + * @pdev: PCI device it matches + * + * Retrieve the PCI configuration space data that interests us from + * the kernel PCI layer + */ +static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) +{ + vptr->rev_id = pdev->revision; + + pci_set_master(pdev); + + vptr->ioaddr = pci_resource_start(pdev, 0); + vptr->memaddr = pci_resource_start(pdev, 1); + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { + dev_err(&pdev->dev, + "region #0 is not an I/O resource, aborting.\n"); + return -EINVAL; + } + + if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) { + dev_err(&pdev->dev, + "region #1 is an I/O resource, aborting.\n"); + return -EINVAL; + } + + if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) { + dev_err(&pdev->dev, "region #1 is too small.\n"); + return -EINVAL; + } + vptr->pdev = pdev; + + return 0; +} + +/** + * velocity_print_info - per driver data + * @vptr: velocity + * + * Print per driver data as the kernel driver finds Velocity + * hardware + */ +static void __devinit velocity_print_info(struct velocity_info *vptr) +{ + struct net_device *dev = vptr->dev; + + printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id)); + printk(KERN_INFO "%s: Ethernet Address: %pM\n", + dev->name, dev->dev_addr); +} + +static u32 velocity_get_link(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + struct mac_regs __iomem *regs = vptr->mac_regs; + return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0; +} + +/** + * velocity_found1 - set up discovered velocity card + * @pdev: PCI device + * @ent: PCI device table entry that matched + * + * Configure a discovered adapter from scratch. Return a negative + * errno error code on failure paths. + */ +static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int first = 1; + struct net_device *dev; + int i; + const char *drv_string; + const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; + struct velocity_info *vptr; + struct mac_regs __iomem *regs; + int ret = -ENOMEM; + + /* FIXME: this driver, like almost all other ethernet drivers, + * can support more than MAX_UNITS. + */ + if (velocity_nics >= MAX_UNITS) { + dev_notice(&pdev->dev, "already found %d NICs.\n", + velocity_nics); + return -ENODEV; + } + + dev = alloc_etherdev(sizeof(struct velocity_info)); + if (!dev) { + dev_err(&pdev->dev, "allocate net device failed.\n"); + goto out; + } + + /* Chain it all together */ + + SET_NETDEV_DEV(dev, &pdev->dev); + vptr = netdev_priv(dev); + + + if (first) { + printk(KERN_INFO "%s Ver. %s\n", + VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION); + printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); + printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); + first = 0; + } + + velocity_init_info(pdev, vptr, info); + + vptr->dev = dev; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_free_dev; + + dev->irq = pdev->irq; + + ret = velocity_get_pci_info(vptr, pdev); + if (ret < 0) { + /* error message already printed */ + goto err_disable; + } + + ret = pci_request_regions(pdev, VELOCITY_NAME); + if (ret < 0) { + dev_err(&pdev->dev, "No PCI resources.\n"); + goto err_disable; + } + + regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE); + if (regs == NULL) { + ret = -EIO; + goto err_release_res; + } + + vptr->mac_regs = regs; + + mac_wol_reset(regs); + + dev->base_addr = vptr->ioaddr; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = readb(®s->PAR[i]); + + + drv_string = dev_driver_string(&pdev->dev); + + velocity_get_options(&vptr->options, velocity_nics, drv_string); + + /* + * Mask out the options cannot be set to the chip + */ + + vptr->options.flags &= info->flags; + + /* + * Enable the chip specified capbilities + */ + + vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL); + + vptr->wol_opts = vptr->options.wol_opts; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + + vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs); + + dev->irq = pdev->irq; + dev->netdev_ops = &velocity_netdev_ops; + dev->ethtool_ops = &velocity_ethtool_ops; + netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT); + + dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX; + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | + NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM; + + ret = register_netdev(dev); + if (ret < 0) + goto err_iounmap; + + if (!velocity_get_link(dev)) { + netif_carrier_off(dev); + vptr->mii_status |= VELOCITY_LINK_FAIL; + } + + velocity_print_info(vptr); + pci_set_drvdata(pdev, dev); + + /* and leave the chip powered down */ + + pci_set_power_state(pdev, PCI_D3hot); + velocity_nics++; +out: + return ret; + +err_iounmap: + iounmap(regs); +err_release_res: + pci_release_regions(pdev); +err_disable: + pci_disable_device(pdev); +err_free_dev: + free_netdev(dev); + goto out; +} + +#ifdef CONFIG_PM +/** + * wol_calc_crc - WOL CRC + * @pattern: data pattern + * @mask_pattern: mask + * + * Compute the wake on lan crc hashes for the packet header + * we are interested in. + */ +static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern) +{ + u16 crc = 0xFFFF; + u8 mask; + int i, j; + + for (i = 0; i < size; i++) { + mask = mask_pattern[i]; + + /* Skip this loop if the mask equals to zero */ + if (mask == 0x00) + continue; + + for (j = 0; j < 8; j++) { + if ((mask & 0x01) == 0) { + mask >>= 1; + continue; + } + mask >>= 1; + crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1); + } + } + /* Finally, invert the result once to get the correct data */ + crc = ~crc; + return bitrev32(crc) >> 16; +} + +/** + * velocity_set_wol - set up for wake on lan + * @vptr: velocity to set WOL status on + * + * Set a card up for wake on lan either by unicast or by + * ARP packet. + * + * FIXME: check static buffer is safe here + */ +static int velocity_set_wol(struct velocity_info *vptr) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + enum speed_opt spd_dpx = vptr->options.spd_dpx; + static u8 buf[256]; + int i; + + static u32 mask_pattern[2][4] = { + {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */ + {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */ + }; + + writew(0xFFFF, ®s->WOLCRClr); + writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet); + writew(WOLCR_MAGIC_EN, ®s->WOLCRSet); + + /* + if (vptr->wol_opts & VELOCITY_WOL_PHY) + writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet); + */ + + if (vptr->wol_opts & VELOCITY_WOL_UCAST) + writew(WOLCR_UNICAST_EN, ®s->WOLCRSet); + + if (vptr->wol_opts & VELOCITY_WOL_ARP) { + struct arp_packet *arp = (struct arp_packet *) buf; + u16 crc; + memset(buf, 0, sizeof(struct arp_packet) + 7); + + for (i = 0; i < 4; i++) + writel(mask_pattern[0][i], ®s->ByteMask[0][i]); + + arp->type = htons(ETH_P_ARP); + arp->ar_op = htons(1); + + memcpy(arp->ar_tip, vptr->ip_addr, 4); + + crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf, + (u8 *) & mask_pattern[0][0]); + + writew(crc, ®s->PatternCRC[0]); + writew(WOLCR_ARP_EN, ®s->WOLCRSet); + } + + BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet); + BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet); + + writew(0x0FFF, ®s->WOLSRClr); + + if (spd_dpx == SPD_DPX_1000_FULL) + goto mac_done; + + if (spd_dpx != SPD_DPX_AUTO) + goto advertise_done; + + if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) { + if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) + MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs); + + MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs); + } + + if (vptr->mii_status & VELOCITY_SPEED_1000) + MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs); + +advertise_done: + BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); + + { + u8 GCR; + GCR = readb(®s->CHIPGCR); + GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX; + writeb(GCR, ®s->CHIPGCR); + } + +mac_done: + BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR); + /* Turn on SWPTAG just before entering power mode */ + BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW); + /* Go to bed ..... */ + BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW); + + return 0; +} + +/** + * velocity_save_context - save registers + * @vptr: velocity + * @context: buffer for stored context + * + * Retrieve the current configuration from the velocity hardware + * and stash it in the context structure, for use by the context + * restore functions. This allows us to save things we need across + * power down states + */ +static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + u16 i; + u8 __iomem *ptr = (u8 __iomem *)regs; + + for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + + for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + + for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) + *((u32 *) (context->mac_reg + i)) = readl(ptr + i); + +} + +static int velocity_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = netdev_priv(dev); + unsigned long flags; + + if (!netif_running(vptr->dev)) + return 0; + + netif_device_detach(vptr->dev); + + spin_lock_irqsave(&vptr->lock, flags); + pci_save_state(pdev); + + if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) { + velocity_get_ip(vptr); + velocity_save_context(vptr, &vptr->context); + velocity_shutdown(vptr); + velocity_set_wol(vptr); + pci_enable_wake(pdev, PCI_D3hot, 1); + pci_set_power_state(pdev, PCI_D3hot); + } else { + velocity_save_context(vptr, &vptr->context); + velocity_shutdown(vptr); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + } + + spin_unlock_irqrestore(&vptr->lock, flags); + return 0; +} + +/** + * velocity_restore_context - restore registers + * @vptr: velocity + * @context: buffer for stored context + * + * Reload the register configuration from the velocity context + * created by velocity_save_context. + */ +static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context) +{ + struct mac_regs __iomem *regs = vptr->mac_regs; + int i; + u8 __iomem *ptr = (u8 __iomem *)regs; + + for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4) + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + + /* Just skip cr0 */ + for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) { + /* Clear */ + writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4); + /* Set */ + writeb(*((u8 *) (context->mac_reg + i)), ptr + i); + } + + for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4) + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + + for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) + writel(*((u32 *) (context->mac_reg + i)), ptr + i); + + for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++) + writeb(*((u8 *) (context->mac_reg + i)), ptr + i); +} + +static int velocity_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct velocity_info *vptr = netdev_priv(dev); + unsigned long flags; + int i; + + if (!netif_running(vptr->dev)) + return 0; + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, 0, 0); + pci_restore_state(pdev); + + mac_wol_reset(vptr->mac_regs); + + spin_lock_irqsave(&vptr->lock, flags); + velocity_restore_context(vptr, &vptr->context); + velocity_init_registers(vptr, VELOCITY_INIT_WOL); + mac_disable_int(vptr->mac_regs); + + velocity_tx_srv(vptr); + + for (i = 0; i < vptr->tx.numq; i++) { + if (vptr->tx.used[i]) + mac_tx_queue_wake(vptr->mac_regs, i); + } + + mac_enable_int(vptr->mac_regs); + spin_unlock_irqrestore(&vptr->lock, flags); + netif_device_attach(vptr->dev); + + return 0; +} +#endif + +/* + * Definition for our device driver. The PCI layer interface + * uses this to handle all our card discover and plugging + */ +static struct pci_driver velocity_driver = { + .name = VELOCITY_NAME, + .id_table = velocity_id_table, + .probe = velocity_found1, + .remove = __devexit_p(velocity_remove1), +#ifdef CONFIG_PM + .suspend = velocity_suspend, + .resume = velocity_resume, +#endif +}; + + +/** + * velocity_ethtool_up - pre hook for ethtool + * @dev: network device + * + * Called before an ethtool operation. We need to make sure the + * chip is out of D3 state before we poke at it. + */ +static int velocity_ethtool_up(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D0); + return 0; +} + +/** + * velocity_ethtool_down - post hook for ethtool + * @dev: network device + * + * Called after an ethtool operation. Restore the chip back to D3 + * state if it isn't running. + */ +static void velocity_ethtool_down(struct net_device *dev) +{ + struct velocity_info *vptr = netdev_priv(dev); + if (!netif_running(dev)) + pci_set_power_state(vptr->pdev, PCI_D3hot); +} + +static int velocity_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + struct mac_regs __iomem *regs = vptr->mac_regs; + u32 status; + status = check_connection_type(vptr->mac_regs); + + cmd->supported = SUPPORTED_TP | + SUPPORTED_Autoneg | + SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full; + + cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg; + if (vptr->options.spd_dpx == SPD_DPX_AUTO) { + cmd->advertising |= + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full; + } else { + switch (vptr->options.spd_dpx) { + case SPD_DPX_1000_FULL: + cmd->advertising |= ADVERTISED_1000baseT_Full; + break; + case SPD_DPX_100_HALF: + cmd->advertising |= ADVERTISED_100baseT_Half; + break; + case SPD_DPX_100_FULL: + cmd->advertising |= ADVERTISED_100baseT_Full; + break; + case SPD_DPX_10_HALF: + cmd->advertising |= ADVERTISED_10baseT_Half; + break; + case SPD_DPX_10_FULL: + cmd->advertising |= ADVERTISED_10baseT_Full; + break; + default: + break; + } + } + + if (status & VELOCITY_SPEED_1000) + ethtool_cmd_speed_set(cmd, SPEED_1000); + else if (status & VELOCITY_SPEED_100) + ethtool_cmd_speed_set(cmd, SPEED_100); + else + ethtool_cmd_speed_set(cmd, SPEED_10); + + cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + cmd->port = PORT_TP; + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = readb(®s->MIIADR) & 0x1F; + + if (status & VELOCITY_DUPLEX_FULL) + cmd->duplex = DUPLEX_FULL; + else + cmd->duplex = DUPLEX_HALF; + + return 0; +} + +static int velocity_set_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + u32 speed = ethtool_cmd_speed(cmd); + u32 curr_status; + u32 new_status = 0; + int ret = 0; + + curr_status = check_connection_type(vptr->mac_regs); + curr_status &= (~VELOCITY_LINK_FAIL); + + new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0); + new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0); + new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0); + new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0); + new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0); + + if ((new_status & VELOCITY_AUTONEG_ENABLE) && + (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) { + ret = -EINVAL; + } else { + enum speed_opt spd_dpx; + + if (new_status & VELOCITY_AUTONEG_ENABLE) + spd_dpx = SPD_DPX_AUTO; + else if ((new_status & VELOCITY_SPEED_1000) && + (new_status & VELOCITY_DUPLEX_FULL)) { + spd_dpx = SPD_DPX_1000_FULL; + } else if (new_status & VELOCITY_SPEED_100) + spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ? + SPD_DPX_100_FULL : SPD_DPX_100_HALF; + else if (new_status & VELOCITY_SPEED_10) + spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ? + SPD_DPX_10_FULL : SPD_DPX_10_HALF; + else + return -EOPNOTSUPP; + + vptr->options.spd_dpx = spd_dpx; + + velocity_set_media_mode(vptr, new_status); + } + + return ret; +} + +static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct velocity_info *vptr = netdev_priv(dev); + strcpy(info->driver, VELOCITY_NAME); + strcpy(info->version, VELOCITY_VERSION); + strcpy(info->bus_info, pci_name(vptr->pdev)); +} + +static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct velocity_info *vptr = netdev_priv(dev); + wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP; + wol->wolopts |= WAKE_MAGIC; + /* + if (vptr->wol_opts & VELOCITY_WOL_PHY) + wol.wolopts|=WAKE_PHY; + */ + if (vptr->wol_opts & VELOCITY_WOL_UCAST) + wol->wolopts |= WAKE_UCAST; + if (vptr->wol_opts & VELOCITY_WOL_ARP) + wol->wolopts |= WAKE_ARP; + memcpy(&wol->sopass, vptr->wol_passwd, 6); +} + +static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct velocity_info *vptr = netdev_priv(dev); + + if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP))) + return -EFAULT; + vptr->wol_opts = VELOCITY_WOL_MAGIC; + + /* + if (wol.wolopts & WAKE_PHY) { + vptr->wol_opts|=VELOCITY_WOL_PHY; + vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED; + } + */ + + if (wol->wolopts & WAKE_MAGIC) { + vptr->wol_opts |= VELOCITY_WOL_MAGIC; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + if (wol->wolopts & WAKE_UCAST) { + vptr->wol_opts |= VELOCITY_WOL_UCAST; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + if (wol->wolopts & WAKE_ARP) { + vptr->wol_opts |= VELOCITY_WOL_ARP; + vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; + } + memcpy(vptr->wol_passwd, wol->sopass, 6); + return 0; +} + +static u32 velocity_get_msglevel(struct net_device *dev) +{ + return msglevel; +} + +static void velocity_set_msglevel(struct net_device *dev, u32 value) +{ + msglevel = value; +} + +static int get_pending_timer_val(int val) +{ + int mult_bits = val >> 6; + int mult = 1; + + switch (mult_bits) + { + case 1: + mult = 4; break; + case 2: + mult = 16; break; + case 3: + mult = 64; break; + case 0: + default: + break; + } + + return (val & 0x3f) * mult; +} + +static void set_pending_timer_val(int *val, u32 us) +{ + u8 mult = 0; + u8 shift = 0; + + if (us >= 0x3f) { + mult = 1; /* mult with 4 */ + shift = 2; + } + if (us >= 0x3f * 4) { + mult = 2; /* mult with 16 */ + shift = 4; + } + if (us >= 0x3f * 16) { + mult = 3; /* mult with 64 */ + shift = 6; + } + + *val = (mult << 6) | ((us >> shift) & 0x3f); +} + + +static int velocity_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + + ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup; + ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup; + + ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer); + ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer); + + return 0; +} + +static int velocity_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct velocity_info *vptr = netdev_priv(dev); + int max_us = 0x3f * 64; + unsigned long flags; + + /* 6 bits of */ + if (ecmd->tx_coalesce_usecs > max_us) + return -EINVAL; + if (ecmd->rx_coalesce_usecs > max_us) + return -EINVAL; + + if (ecmd->tx_max_coalesced_frames > 0xff) + return -EINVAL; + if (ecmd->rx_max_coalesced_frames > 0xff) + return -EINVAL; + + vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames; + vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames; + + set_pending_timer_val(&vptr->options.rxqueue_timer, + ecmd->rx_coalesce_usecs); + set_pending_timer_val(&vptr->options.txqueue_timer, + ecmd->tx_coalesce_usecs); + + /* Setup the interrupt suppression and queue timers */ + spin_lock_irqsave(&vptr->lock, flags); + mac_disable_int(vptr->mac_regs); + setup_adaptive_interrupts(vptr); + setup_queue_timers(vptr); + + mac_write_int_mask(vptr->int_mask, vptr->mac_regs); + mac_clear_isr(vptr->mac_regs); + mac_enable_int(vptr->mac_regs); + spin_unlock_irqrestore(&vptr->lock, flags); + + return 0; +} + +static const char velocity_gstrings[][ETH_GSTRING_LEN] = { + "rx_all", + "rx_ok", + "tx_ok", + "rx_error", + "rx_runt_ok", + "rx_runt_err", + "rx_64", + "tx_64", + "rx_65_to_127", + "tx_65_to_127", + "rx_128_to_255", + "tx_128_to_255", + "rx_256_to_511", + "tx_256_to_511", + "rx_512_to_1023", + "tx_512_to_1023", + "rx_1024_to_1518", + "tx_1024_to_1518", + "tx_ether_collisions", + "rx_crc_errors", + "rx_jumbo", + "tx_jumbo", + "rx_mac_control_frames", + "tx_mac_control_frames", + "rx_frame_alignement_errors", + "rx_long_ok", + "rx_long_err", + "tx_sqe_errors", + "rx_no_buf", + "rx_symbol_errors", + "in_range_length_errors", + "late_collisions" +}; + +static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data) +{ + switch (sset) { + case ETH_SS_STATS: + memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings)); + break; + } +} + +static int velocity_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(velocity_gstrings); + default: + return -EOPNOTSUPP; + } +} + +static void velocity_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + if (netif_running(dev)) { + struct velocity_info *vptr = netdev_priv(dev); + u32 *p = vptr->mib_counter; + int i; + + spin_lock_irq(&vptr->lock); + velocity_update_hw_mibs(vptr); + spin_unlock_irq(&vptr->lock); + + for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++) + *data++ = *p++; + } +} + +static const struct ethtool_ops velocity_ethtool_ops = { + .get_settings = velocity_get_settings, + .set_settings = velocity_set_settings, + .get_drvinfo = velocity_get_drvinfo, + .get_wol = velocity_ethtool_get_wol, + .set_wol = velocity_ethtool_set_wol, + .get_msglevel = velocity_get_msglevel, + .set_msglevel = velocity_set_msglevel, + .get_link = velocity_get_link, + .get_strings = velocity_get_strings, + .get_sset_count = velocity_get_sset_count, + .get_ethtool_stats = velocity_get_ethtool_stats, + .get_coalesce = velocity_get_coalesce, + .set_coalesce = velocity_set_coalesce, + .begin = velocity_ethtool_up, + .complete = velocity_ethtool_down +}; + +#if defined(CONFIG_PM) && defined(CONFIG_INET) +static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr) +{ + struct in_ifaddr *ifa = ptr; + struct net_device *dev = ifa->ifa_dev->dev; + + if (dev_net(dev) == &init_net && + dev->netdev_ops == &velocity_netdev_ops) + velocity_get_ip(netdev_priv(dev)); + + return NOTIFY_DONE; +} + +static struct notifier_block velocity_inetaddr_notifier = { + .notifier_call = velocity_netdev_event, +}; + +static void velocity_register_notifier(void) +{ + register_inetaddr_notifier(&velocity_inetaddr_notifier); +} + +static void velocity_unregister_notifier(void) +{ + unregister_inetaddr_notifier(&velocity_inetaddr_notifier); +} + +#else + +#define velocity_register_notifier() do {} while (0) +#define velocity_unregister_notifier() do {} while (0) + +#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */ + +/** + * velocity_init_module - load time function + * + * Called when the velocity module is loaded. The PCI driver + * is registered with the PCI layer, and in turn will call + * the probe functions for each velocity adapter installed + * in the system. + */ +static int __init velocity_init_module(void) +{ + int ret; + + velocity_register_notifier(); + ret = pci_register_driver(&velocity_driver); + if (ret < 0) + velocity_unregister_notifier(); + return ret; +} + +/** + * velocity_cleanup - module unload + * + * When the velocity hardware is unloaded this function is called. + * It will clean up the notifiers and the unregister the PCI + * driver interface for this hardware. This in turn cleans up + * all discovered interfaces before returning from the function + */ +static void __exit velocity_cleanup_module(void) +{ + velocity_unregister_notifier(); + pci_unregister_driver(&velocity_driver); +} + +module_init(velocity_init_module); +module_exit(velocity_cleanup_module); diff --git a/drivers/net/ethernet/via/via-velocity.h b/drivers/net/ethernet/via/via-velocity.h new file mode 100644 index 000000000000..4cb9f13485e9 --- /dev/null +++ b/drivers/net/ethernet/via/via-velocity.h @@ -0,0 +1,1579 @@ +/* + * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. + * All rights reserved. + * + * This software may be redistributed and/or modified under + * the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or + * any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * File: via-velocity.h + * + * Purpose: Header file to define driver's private structures. + * + * Author: Chuang Liang-Shing, AJ Jiang + * + * Date: Jan 24, 2003 + */ + + +#ifndef VELOCITY_H +#define VELOCITY_H + +#define VELOCITY_TX_CSUM_SUPPORT + +#define VELOCITY_NAME "via-velocity" +#define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver" +#define VELOCITY_VERSION "1.15" + +#define VELOCITY_IO_SIZE 256 +#define VELOCITY_NAPI_WEIGHT 64 + +#define PKT_BUF_SZ 1540 + +#define MAX_UNITS 8 +#define OPTION_DEFAULT { [0 ... MAX_UNITS-1] = -1} + +#define REV_ID_VT6110 (0) + +#define BYTE_REG_BITS_ON(x,p) do { writeb(readb((p))|(x),(p));} while (0) +#define WORD_REG_BITS_ON(x,p) do { writew(readw((p))|(x),(p));} while (0) +#define DWORD_REG_BITS_ON(x,p) do { writel(readl((p))|(x),(p));} while (0) + +#define BYTE_REG_BITS_IS_ON(x,p) (readb((p)) & (x)) +#define WORD_REG_BITS_IS_ON(x,p) (readw((p)) & (x)) +#define DWORD_REG_BITS_IS_ON(x,p) (readl((p)) & (x)) + +#define BYTE_REG_BITS_OFF(x,p) do { writeb(readb((p)) & (~(x)),(p));} while (0) +#define WORD_REG_BITS_OFF(x,p) do { writew(readw((p)) & (~(x)),(p));} while (0) +#define DWORD_REG_BITS_OFF(x,p) do { writel(readl((p)) & (~(x)),(p));} while (0) + +#define BYTE_REG_BITS_SET(x,m,p) do { writeb( (readb((p)) & (~(m))) |(x),(p));} while (0) +#define WORD_REG_BITS_SET(x,m,p) do { writew( (readw((p)) & (~(m))) |(x),(p));} while (0) +#define DWORD_REG_BITS_SET(x,m,p) do { writel( (readl((p)) & (~(m)))|(x),(p));} while (0) + +#define VAR_USED(p) do {(p)=(p);} while (0) + +/* + * Purpose: Structures for MAX RX/TX descriptors. + */ + + +#define B_OWNED_BY_CHIP 1 +#define B_OWNED_BY_HOST 0 + +/* + * Bits in the RSR0 register + */ + +#define RSR_DETAG cpu_to_le16(0x0080) +#define RSR_SNTAG cpu_to_le16(0x0040) +#define RSR_RXER cpu_to_le16(0x0020) +#define RSR_RL cpu_to_le16(0x0010) +#define RSR_CE cpu_to_le16(0x0008) +#define RSR_FAE cpu_to_le16(0x0004) +#define RSR_CRC cpu_to_le16(0x0002) +#define RSR_VIDM cpu_to_le16(0x0001) + +/* + * Bits in the RSR1 register + */ + +#define RSR_RXOK cpu_to_le16(0x8000) // rx OK +#define RSR_PFT cpu_to_le16(0x4000) // Perfect filtering address match +#define RSR_MAR cpu_to_le16(0x2000) // MAC accept multicast address packet +#define RSR_BAR cpu_to_le16(0x1000) // MAC accept broadcast address packet +#define RSR_PHY cpu_to_le16(0x0800) // MAC accept physical address packet +#define RSR_VTAG cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator +#define RSR_STP cpu_to_le16(0x0200) // start of packet +#define RSR_EDP cpu_to_le16(0x0100) // end of packet + +/* + * Bits in the CSM register + */ + +#define CSM_IPOK 0x40 //IP Checksum validation ok +#define CSM_TUPOK 0x20 //TCP/UDP Checksum validation ok +#define CSM_FRAG 0x10 //Fragment IP datagram +#define CSM_IPKT 0x04 //Received an IP packet +#define CSM_TCPKT 0x02 //Received a TCP packet +#define CSM_UDPKT 0x01 //Received a UDP packet + +/* + * Bits in the TSR0 register + */ + +#define TSR0_ABT cpu_to_le16(0x0080) // Tx abort because of excessive collision +#define TSR0_OWT cpu_to_le16(0x0040) // Jumbo frame Tx abort +#define TSR0_OWC cpu_to_le16(0x0020) // Out of window collision +#define TSR0_COLS cpu_to_le16(0x0010) // experience collision in this transmit event +#define TSR0_NCR3 cpu_to_le16(0x0008) // collision retry counter[3] +#define TSR0_NCR2 cpu_to_le16(0x0004) // collision retry counter[2] +#define TSR0_NCR1 cpu_to_le16(0x0002) // collision retry counter[1] +#define TSR0_NCR0 cpu_to_le16(0x0001) // collision retry counter[0] +#define TSR0_TERR cpu_to_le16(0x8000) // +#define TSR0_FDX cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode +#define TSR0_GMII cpu_to_le16(0x2000) // current transaction is serviced by GMII mode +#define TSR0_LNKFL cpu_to_le16(0x1000) // packet serviced during link down +#define TSR0_SHDN cpu_to_le16(0x0400) // shutdown case +#define TSR0_CRS cpu_to_le16(0x0200) // carrier sense lost +#define TSR0_CDH cpu_to_le16(0x0100) // AQE test fail (CD heartbeat) + +// +// Bits in the TCR0 register +// +#define TCR0_TIC 0x80 // assert interrupt immediately while descriptor has been send complete +#define TCR0_PIC 0x40 // priority interrupt request, INA# is issued over adaptive interrupt scheme +#define TCR0_VETAG 0x20 // enable VLAN tag +#define TCR0_IPCK 0x10 // request IP checksum calculation. +#define TCR0_UDPCK 0x08 // request UDP checksum calculation. +#define TCR0_TCPCK 0x04 // request TCP checksum calculation. +#define TCR0_JMBO 0x02 // indicate a jumbo packet in GMAC side +#define TCR0_CRC 0x01 // disable CRC generation + +#define TCPLS_NORMAL 3 +#define TCPLS_START 2 +#define TCPLS_END 1 +#define TCPLS_MED 0 + + +// max transmit or receive buffer size +#define CB_RX_BUF_SIZE 2048UL // max buffer size + // NOTE: must be multiple of 4 + +#define CB_MAX_RD_NUM 512 // MAX # of RD +#define CB_MAX_TD_NUM 256 // MAX # of TD + +#define CB_INIT_RD_NUM_3119 128 // init # of RD, for setup VT3119 +#define CB_INIT_TD_NUM_3119 64 // init # of TD, for setup VT3119 + +#define CB_INIT_RD_NUM 128 // init # of RD, for setup default +#define CB_INIT_TD_NUM 64 // init # of TD, for setup default + +// for 3119 +#define CB_TD_RING_NUM 4 // # of TD rings. +#define CB_MAX_SEG_PER_PKT 7 // max data seg per packet (Tx) + + +/* + * If collisions excess 15 times , tx will abort, and + * if tx fifo underflow, tx will fail + * we should try to resend it + */ + +#define CB_MAX_TX_ABORT_RETRY 3 + +/* + * Receive descriptor + */ + +struct rdesc0 { + __le16 RSR; /* Receive status */ + __le16 len; /* bits 0--13; bit 15 - owner */ +}; + +struct rdesc1 { + __le16 PQTAG; + u8 CSM; + u8 IPKT; +}; + +enum { + RX_INTEN = cpu_to_le16(0x8000) +}; + +struct rx_desc { + struct rdesc0 rdesc0; + struct rdesc1 rdesc1; + __le32 pa_low; /* Low 32 bit PCI address */ + __le16 pa_high; /* Next 16 bit PCI address (48 total) */ + __le16 size; /* bits 0--14 - frame size, bit 15 - enable int. */ +} __packed; + +/* + * Transmit descriptor + */ + +struct tdesc0 { + __le16 TSR; /* Transmit status register */ + __le16 len; /* bits 0--13 - size of frame, bit 15 - owner */ +}; + +struct tdesc1 { + __le16 vlan; + u8 TCR; + u8 cmd; /* bits 0--1 - TCPLS, bits 4--7 - CMDZ */ +} __packed; + +enum { + TD_QUEUE = cpu_to_le16(0x8000) +}; + +struct td_buf { + __le32 pa_low; + __le16 pa_high; + __le16 size; /* bits 0--13 - size, bit 15 - queue */ +} __packed; + +struct tx_desc { + struct tdesc0 tdesc0; + struct tdesc1 tdesc1; + struct td_buf td_buf[7]; +}; + +struct velocity_rd_info { + struct sk_buff *skb; + dma_addr_t skb_dma; +}; + +/* + * Used to track transmit side buffers. + */ + +struct velocity_td_info { + struct sk_buff *skb; + int nskb_dma; + dma_addr_t skb_dma[7]; +}; + +enum velocity_owner { + OWNED_BY_HOST = 0, + OWNED_BY_NIC = cpu_to_le16(0x8000) +}; + + +/* + * MAC registers and macros. + */ + + +#define MCAM_SIZE 64 +#define VCAM_SIZE 64 +#define TX_QUEUE_NO 4 + +#define MAX_HW_MIB_COUNTER 32 +#define VELOCITY_MIN_MTU (64) +#define VELOCITY_MAX_MTU (9000) + +/* + * Registers in the MAC + */ + +#define MAC_REG_PAR 0x00 // physical address +#define MAC_REG_RCR 0x06 +#define MAC_REG_TCR 0x07 +#define MAC_REG_CR0_SET 0x08 +#define MAC_REG_CR1_SET 0x09 +#define MAC_REG_CR2_SET 0x0A +#define MAC_REG_CR3_SET 0x0B +#define MAC_REG_CR0_CLR 0x0C +#define MAC_REG_CR1_CLR 0x0D +#define MAC_REG_CR2_CLR 0x0E +#define MAC_REG_CR3_CLR 0x0F +#define MAC_REG_MAR 0x10 +#define MAC_REG_CAM 0x10 +#define MAC_REG_DEC_BASE_HI 0x18 +#define MAC_REG_DBF_BASE_HI 0x1C +#define MAC_REG_ISR_CTL 0x20 +#define MAC_REG_ISR_HOTMR 0x20 +#define MAC_REG_ISR_TSUPTHR 0x20 +#define MAC_REG_ISR_RSUPTHR 0x20 +#define MAC_REG_ISR_CTL1 0x21 +#define MAC_REG_TXE_SR 0x22 +#define MAC_REG_RXE_SR 0x23 +#define MAC_REG_ISR 0x24 +#define MAC_REG_ISR0 0x24 +#define MAC_REG_ISR1 0x25 +#define MAC_REG_ISR2 0x26 +#define MAC_REG_ISR3 0x27 +#define MAC_REG_IMR 0x28 +#define MAC_REG_IMR0 0x28 +#define MAC_REG_IMR1 0x29 +#define MAC_REG_IMR2 0x2A +#define MAC_REG_IMR3 0x2B +#define MAC_REG_TDCSR_SET 0x30 +#define MAC_REG_RDCSR_SET 0x32 +#define MAC_REG_TDCSR_CLR 0x34 +#define MAC_REG_RDCSR_CLR 0x36 +#define MAC_REG_RDBASE_LO 0x38 +#define MAC_REG_RDINDX 0x3C +#define MAC_REG_TDBASE_LO 0x40 +#define MAC_REG_RDCSIZE 0x50 +#define MAC_REG_TDCSIZE 0x52 +#define MAC_REG_TDINDX 0x54 +#define MAC_REG_TDIDX0 0x54 +#define MAC_REG_TDIDX1 0x56 +#define MAC_REG_TDIDX2 0x58 +#define MAC_REG_TDIDX3 0x5A +#define MAC_REG_PAUSE_TIMER 0x5C +#define MAC_REG_RBRDU 0x5E +#define MAC_REG_FIFO_TEST0 0x60 +#define MAC_REG_FIFO_TEST1 0x64 +#define MAC_REG_CAMADDR 0x68 +#define MAC_REG_CAMCR 0x69 +#define MAC_REG_GFTEST 0x6A +#define MAC_REG_FTSTCMD 0x6B +#define MAC_REG_MIICFG 0x6C +#define MAC_REG_MIISR 0x6D +#define MAC_REG_PHYSR0 0x6E +#define MAC_REG_PHYSR1 0x6F +#define MAC_REG_MIICR 0x70 +#define MAC_REG_MIIADR 0x71 +#define MAC_REG_MIIDATA 0x72 +#define MAC_REG_SOFT_TIMER0 0x74 +#define MAC_REG_SOFT_TIMER1 0x76 +#define MAC_REG_CFGA 0x78 +#define MAC_REG_CFGB 0x79 +#define MAC_REG_CFGC 0x7A +#define MAC_REG_CFGD 0x7B +#define MAC_REG_DCFG0 0x7C +#define MAC_REG_DCFG1 0x7D +#define MAC_REG_MCFG0 0x7E +#define MAC_REG_MCFG1 0x7F + +#define MAC_REG_TBIST 0x80 +#define MAC_REG_RBIST 0x81 +#define MAC_REG_PMCC 0x82 +#define MAC_REG_STICKHW 0x83 +#define MAC_REG_MIBCR 0x84 +#define MAC_REG_EERSV 0x85 +#define MAC_REG_REVID 0x86 +#define MAC_REG_MIBREAD 0x88 +#define MAC_REG_BPMA 0x8C +#define MAC_REG_EEWR_DATA 0x8C +#define MAC_REG_BPMD_WR 0x8F +#define MAC_REG_BPCMD 0x90 +#define MAC_REG_BPMD_RD 0x91 +#define MAC_REG_EECHKSUM 0x92 +#define MAC_REG_EECSR 0x93 +#define MAC_REG_EERD_DATA 0x94 +#define MAC_REG_EADDR 0x96 +#define MAC_REG_EMBCMD 0x97 +#define MAC_REG_JMPSR0 0x98 +#define MAC_REG_JMPSR1 0x99 +#define MAC_REG_JMPSR2 0x9A +#define MAC_REG_JMPSR3 0x9B +#define MAC_REG_CHIPGSR 0x9C +#define MAC_REG_TESTCFG 0x9D +#define MAC_REG_DEBUG 0x9E +#define MAC_REG_CHIPGCR 0x9F /* Chip Operation and Diagnostic Control */ +#define MAC_REG_WOLCR0_SET 0xA0 +#define MAC_REG_WOLCR1_SET 0xA1 +#define MAC_REG_PWCFG_SET 0xA2 +#define MAC_REG_WOLCFG_SET 0xA3 +#define MAC_REG_WOLCR0_CLR 0xA4 +#define MAC_REG_WOLCR1_CLR 0xA5 +#define MAC_REG_PWCFG_CLR 0xA6 +#define MAC_REG_WOLCFG_CLR 0xA7 +#define MAC_REG_WOLSR0_SET 0xA8 +#define MAC_REG_WOLSR1_SET 0xA9 +#define MAC_REG_WOLSR0_CLR 0xAC +#define MAC_REG_WOLSR1_CLR 0xAD +#define MAC_REG_PATRN_CRC0 0xB0 +#define MAC_REG_PATRN_CRC1 0xB2 +#define MAC_REG_PATRN_CRC2 0xB4 +#define MAC_REG_PATRN_CRC3 0xB6 +#define MAC_REG_PATRN_CRC4 0xB8 +#define MAC_REG_PATRN_CRC5 0xBA +#define MAC_REG_PATRN_CRC6 0xBC +#define MAC_REG_PATRN_CRC7 0xBE +#define MAC_REG_BYTEMSK0_0 0xC0 +#define MAC_REG_BYTEMSK0_1 0xC4 +#define MAC_REG_BYTEMSK0_2 0xC8 +#define MAC_REG_BYTEMSK0_3 0xCC +#define MAC_REG_BYTEMSK1_0 0xD0 +#define MAC_REG_BYTEMSK1_1 0xD4 +#define MAC_REG_BYTEMSK1_2 0xD8 +#define MAC_REG_BYTEMSK1_3 0xDC +#define MAC_REG_BYTEMSK2_0 0xE0 +#define MAC_REG_BYTEMSK2_1 0xE4 +#define MAC_REG_BYTEMSK2_2 0xE8 +#define MAC_REG_BYTEMSK2_3 0xEC +#define MAC_REG_BYTEMSK3_0 0xF0 +#define MAC_REG_BYTEMSK3_1 0xF4 +#define MAC_REG_BYTEMSK3_2 0xF8 +#define MAC_REG_BYTEMSK3_3 0xFC + +/* + * Bits in the RCR register + */ + +#define RCR_AS 0x80 +#define RCR_AP 0x40 +#define RCR_AL 0x20 +#define RCR_PROM 0x10 +#define RCR_AB 0x08 +#define RCR_AM 0x04 +#define RCR_AR 0x02 +#define RCR_SEP 0x01 + +/* + * Bits in the TCR register + */ + +#define TCR_TB2BDIS 0x80 +#define TCR_COLTMC1 0x08 +#define TCR_COLTMC0 0x04 +#define TCR_LB1 0x02 /* loopback[1] */ +#define TCR_LB0 0x01 /* loopback[0] */ + +/* + * Bits in the CR0 register + */ + +#define CR0_TXON 0x00000008UL +#define CR0_RXON 0x00000004UL +#define CR0_STOP 0x00000002UL /* stop MAC, default = 1 */ +#define CR0_STRT 0x00000001UL /* start MAC */ +#define CR0_SFRST 0x00008000UL /* software reset */ +#define CR0_TM1EN 0x00004000UL +#define CR0_TM0EN 0x00002000UL +#define CR0_DPOLL 0x00000800UL /* disable rx/tx auto polling */ +#define CR0_DISAU 0x00000100UL +#define CR0_XONEN 0x00800000UL +#define CR0_FDXTFCEN 0x00400000UL /* full-duplex TX flow control enable */ +#define CR0_FDXRFCEN 0x00200000UL /* full-duplex RX flow control enable */ +#define CR0_HDXFCEN 0x00100000UL /* half-duplex flow control enable */ +#define CR0_XHITH1 0x00080000UL /* TX XON high threshold 1 */ +#define CR0_XHITH0 0x00040000UL /* TX XON high threshold 0 */ +#define CR0_XLTH1 0x00020000UL /* TX pause frame low threshold 1 */ +#define CR0_XLTH0 0x00010000UL /* TX pause frame low threshold 0 */ +#define CR0_GSPRST 0x80000000UL +#define CR0_FORSRST 0x40000000UL +#define CR0_FPHYRST 0x20000000UL +#define CR0_DIAG 0x10000000UL +#define CR0_INTPCTL 0x04000000UL +#define CR0_GINTMSK1 0x02000000UL +#define CR0_GINTMSK0 0x01000000UL + +/* + * Bits in the CR1 register + */ + +#define CR1_SFRST 0x80 /* software reset */ +#define CR1_TM1EN 0x40 +#define CR1_TM0EN 0x20 +#define CR1_DPOLL 0x08 /* disable rx/tx auto polling */ +#define CR1_DISAU 0x01 + +/* + * Bits in the CR2 register + */ + +#define CR2_XONEN 0x80 +#define CR2_FDXTFCEN 0x40 /* full-duplex TX flow control enable */ +#define CR2_FDXRFCEN 0x20 /* full-duplex RX flow control enable */ +#define CR2_HDXFCEN 0x10 /* half-duplex flow control enable */ +#define CR2_XHITH1 0x08 /* TX XON high threshold 1 */ +#define CR2_XHITH0 0x04 /* TX XON high threshold 0 */ +#define CR2_XLTH1 0x02 /* TX pause frame low threshold 1 */ +#define CR2_XLTH0 0x01 /* TX pause frame low threshold 0 */ + +/* + * Bits in the CR3 register + */ + +#define CR3_GSPRST 0x80 +#define CR3_FORSRST 0x40 +#define CR3_FPHYRST 0x20 +#define CR3_DIAG 0x10 +#define CR3_INTPCTL 0x04 +#define CR3_GINTMSK1 0x02 +#define CR3_GINTMSK0 0x01 + +#define ISRCTL_UDPINT 0x8000 +#define ISRCTL_TSUPDIS 0x4000 +#define ISRCTL_RSUPDIS 0x2000 +#define ISRCTL_PMSK1 0x1000 +#define ISRCTL_PMSK0 0x0800 +#define ISRCTL_INTPD 0x0400 +#define ISRCTL_HCRLD 0x0200 +#define ISRCTL_SCRLD 0x0100 + +/* + * Bits in the ISR_CTL1 register + */ + +#define ISRCTL1_UDPINT 0x80 +#define ISRCTL1_TSUPDIS 0x40 +#define ISRCTL1_RSUPDIS 0x20 +#define ISRCTL1_PMSK1 0x10 +#define ISRCTL1_PMSK0 0x08 +#define ISRCTL1_INTPD 0x04 +#define ISRCTL1_HCRLD 0x02 +#define ISRCTL1_SCRLD 0x01 + +/* + * Bits in the TXE_SR register + */ + +#define TXESR_TFDBS 0x08 +#define TXESR_TDWBS 0x04 +#define TXESR_TDRBS 0x02 +#define TXESR_TDSTR 0x01 + +/* + * Bits in the RXE_SR register + */ + +#define RXESR_RFDBS 0x08 +#define RXESR_RDWBS 0x04 +#define RXESR_RDRBS 0x02 +#define RXESR_RDSTR 0x01 + +/* + * Bits in the ISR register + */ + +#define ISR_ISR3 0x80000000UL +#define ISR_ISR2 0x40000000UL +#define ISR_ISR1 0x20000000UL +#define ISR_ISR0 0x10000000UL +#define ISR_TXSTLI 0x02000000UL +#define ISR_RXSTLI 0x01000000UL +#define ISR_HFLD 0x00800000UL +#define ISR_UDPI 0x00400000UL +#define ISR_MIBFI 0x00200000UL +#define ISR_SHDNI 0x00100000UL +#define ISR_PHYI 0x00080000UL +#define ISR_PWEI 0x00040000UL +#define ISR_TMR1I 0x00020000UL +#define ISR_TMR0I 0x00010000UL +#define ISR_SRCI 0x00008000UL +#define ISR_LSTPEI 0x00004000UL +#define ISR_LSTEI 0x00002000UL +#define ISR_OVFI 0x00001000UL +#define ISR_FLONI 0x00000800UL +#define ISR_RACEI 0x00000400UL +#define ISR_TXWB1I 0x00000200UL +#define ISR_TXWB0I 0x00000100UL +#define ISR_PTX3I 0x00000080UL +#define ISR_PTX2I 0x00000040UL +#define ISR_PTX1I 0x00000020UL +#define ISR_PTX0I 0x00000010UL +#define ISR_PTXI 0x00000008UL +#define ISR_PRXI 0x00000004UL +#define ISR_PPTXI 0x00000002UL +#define ISR_PPRXI 0x00000001UL + +/* + * Bits in the IMR register + */ + +#define IMR_TXSTLM 0x02000000UL +#define IMR_UDPIM 0x00400000UL +#define IMR_MIBFIM 0x00200000UL +#define IMR_SHDNIM 0x00100000UL +#define IMR_PHYIM 0x00080000UL +#define IMR_PWEIM 0x00040000UL +#define IMR_TMR1IM 0x00020000UL +#define IMR_TMR0IM 0x00010000UL + +#define IMR_SRCIM 0x00008000UL +#define IMR_LSTPEIM 0x00004000UL +#define IMR_LSTEIM 0x00002000UL +#define IMR_OVFIM 0x00001000UL +#define IMR_FLONIM 0x00000800UL +#define IMR_RACEIM 0x00000400UL +#define IMR_TXWB1IM 0x00000200UL +#define IMR_TXWB0IM 0x00000100UL + +#define IMR_PTX3IM 0x00000080UL +#define IMR_PTX2IM 0x00000040UL +#define IMR_PTX1IM 0x00000020UL +#define IMR_PTX0IM 0x00000010UL +#define IMR_PTXIM 0x00000008UL +#define IMR_PRXIM 0x00000004UL +#define IMR_PPTXIM 0x00000002UL +#define IMR_PPRXIM 0x00000001UL + +/* 0x0013FB0FUL = initial value of IMR */ + +#define INT_MASK_DEF (IMR_PPTXIM|IMR_PPRXIM|IMR_PTXIM|IMR_PRXIM|\ + IMR_PWEIM|IMR_TXWB0IM|IMR_TXWB1IM|IMR_FLONIM|\ + IMR_OVFIM|IMR_LSTEIM|IMR_LSTPEIM|IMR_SRCIM|IMR_MIBFIM|\ + IMR_SHDNIM|IMR_TMR1IM|IMR_TMR0IM|IMR_TXSTLM) + +/* + * Bits in the TDCSR0/1, RDCSR0 register + */ + +#define TRDCSR_DEAD 0x0008 +#define TRDCSR_WAK 0x0004 +#define TRDCSR_ACT 0x0002 +#define TRDCSR_RUN 0x0001 + +/* + * Bits in the CAMADDR register + */ + +#define CAMADDR_CAMEN 0x80 +#define CAMADDR_VCAMSL 0x40 + +/* + * Bits in the CAMCR register + */ + +#define CAMCR_PS1 0x80 +#define CAMCR_PS0 0x40 +#define CAMCR_AITRPKT 0x20 +#define CAMCR_AITR16 0x10 +#define CAMCR_CAMRD 0x08 +#define CAMCR_CAMWR 0x04 +#define CAMCR_PS_CAM_MASK 0x40 +#define CAMCR_PS_CAM_DATA 0x80 +#define CAMCR_PS_MAR 0x00 + +/* + * Bits in the MIICFG register + */ + +#define MIICFG_MPO1 0x80 +#define MIICFG_MPO0 0x40 +#define MIICFG_MFDC 0x20 + +/* + * Bits in the MIISR register + */ + +#define MIISR_MIDLE 0x80 + +/* + * Bits in the PHYSR0 register + */ + +#define PHYSR0_PHYRST 0x80 +#define PHYSR0_LINKGD 0x40 +#define PHYSR0_FDPX 0x10 +#define PHYSR0_SPDG 0x08 +#define PHYSR0_SPD10 0x04 +#define PHYSR0_RXFLC 0x02 +#define PHYSR0_TXFLC 0x01 + +/* + * Bits in the PHYSR1 register + */ + +#define PHYSR1_PHYTBI 0x01 + +/* + * Bits in the MIICR register + */ + +#define MIICR_MAUTO 0x80 +#define MIICR_RCMD 0x40 +#define MIICR_WCMD 0x20 +#define MIICR_MDPM 0x10 +#define MIICR_MOUT 0x08 +#define MIICR_MDO 0x04 +#define MIICR_MDI 0x02 +#define MIICR_MDC 0x01 + +/* + * Bits in the MIIADR register + */ + +#define MIIADR_SWMPL 0x80 + +/* + * Bits in the CFGA register + */ + +#define CFGA_PMHCTG 0x08 +#define CFGA_GPIO1PD 0x04 +#define CFGA_ABSHDN 0x02 +#define CFGA_PACPI 0x01 + +/* + * Bits in the CFGB register + */ + +#define CFGB_GTCKOPT 0x80 +#define CFGB_MIIOPT 0x40 +#define CFGB_CRSEOPT 0x20 +#define CFGB_OFSET 0x10 +#define CFGB_CRANDOM 0x08 +#define CFGB_CAP 0x04 +#define CFGB_MBA 0x02 +#define CFGB_BAKOPT 0x01 + +/* + * Bits in the CFGC register + */ + +#define CFGC_EELOAD 0x80 +#define CFGC_BROPT 0x40 +#define CFGC_DLYEN 0x20 +#define CFGC_DTSEL 0x10 +#define CFGC_BTSEL 0x08 +#define CFGC_BPS2 0x04 /* bootrom select[2] */ +#define CFGC_BPS1 0x02 /* bootrom select[1] */ +#define CFGC_BPS0 0x01 /* bootrom select[0] */ + +/* + * Bits in the CFGD register + */ + +#define CFGD_IODIS 0x80 +#define CFGD_MSLVDACEN 0x40 +#define CFGD_CFGDACEN 0x20 +#define CFGD_PCI64EN 0x10 +#define CFGD_HTMRL4 0x08 + +/* + * Bits in the DCFG1 register + */ + +#define DCFG_XMWI 0x8000 +#define DCFG_XMRM 0x4000 +#define DCFG_XMRL 0x2000 +#define DCFG_PERDIS 0x1000 +#define DCFG_MRWAIT 0x0400 +#define DCFG_MWWAIT 0x0200 +#define DCFG_LATMEN 0x0100 + +/* + * Bits in the MCFG0 register + */ + +#define MCFG_RXARB 0x0080 +#define MCFG_RFT1 0x0020 +#define MCFG_RFT0 0x0010 +#define MCFG_LOWTHOPT 0x0008 +#define MCFG_PQEN 0x0004 +#define MCFG_RTGOPT 0x0002 +#define MCFG_VIDFR 0x0001 + +/* + * Bits in the MCFG1 register + */ + +#define MCFG_TXARB 0x8000 +#define MCFG_TXQBK1 0x0800 +#define MCFG_TXQBK0 0x0400 +#define MCFG_TXQNOBK 0x0200 +#define MCFG_SNAPOPT 0x0100 + +/* + * Bits in the PMCC register + */ + +#define PMCC_DSI 0x80 +#define PMCC_D2_DIS 0x40 +#define PMCC_D1_DIS 0x20 +#define PMCC_D3C_EN 0x10 +#define PMCC_D3H_EN 0x08 +#define PMCC_D2_EN 0x04 +#define PMCC_D1_EN 0x02 +#define PMCC_D0_EN 0x01 + +/* + * Bits in STICKHW + */ + +#define STICKHW_SWPTAG 0x10 +#define STICKHW_WOLSR 0x08 +#define STICKHW_WOLEN 0x04 +#define STICKHW_DS1 0x02 /* R/W by software/cfg cycle */ +#define STICKHW_DS0 0x01 /* suspend well DS write port */ + +/* + * Bits in the MIBCR register + */ + +#define MIBCR_MIBISTOK 0x80 +#define MIBCR_MIBISTGO 0x40 +#define MIBCR_MIBINC 0x20 +#define MIBCR_MIBHI 0x10 +#define MIBCR_MIBFRZ 0x08 +#define MIBCR_MIBFLSH 0x04 +#define MIBCR_MPTRINI 0x02 +#define MIBCR_MIBCLR 0x01 + +/* + * Bits in the EERSV register + */ + +#define EERSV_BOOT_RPL ((u8) 0x01) /* Boot method selection for VT6110 */ + +#define EERSV_BOOT_MASK ((u8) 0x06) +#define EERSV_BOOT_INT19 ((u8) 0x00) +#define EERSV_BOOT_INT18 ((u8) 0x02) +#define EERSV_BOOT_LOCAL ((u8) 0x04) +#define EERSV_BOOT_BEV ((u8) 0x06) + + +/* + * Bits in BPCMD + */ + +#define BPCMD_BPDNE 0x80 +#define BPCMD_EBPWR 0x02 +#define BPCMD_EBPRD 0x01 + +/* + * Bits in the EECSR register + */ + +#define EECSR_EMBP 0x40 /* eeprom embedded programming */ +#define EECSR_RELOAD 0x20 /* eeprom content reload */ +#define EECSR_DPM 0x10 /* eeprom direct programming */ +#define EECSR_ECS 0x08 /* eeprom CS pin */ +#define EECSR_ECK 0x04 /* eeprom CK pin */ +#define EECSR_EDI 0x02 /* eeprom DI pin */ +#define EECSR_EDO 0x01 /* eeprom DO pin */ + +/* + * Bits in the EMBCMD register + */ + +#define EMBCMD_EDONE 0x80 +#define EMBCMD_EWDIS 0x08 +#define EMBCMD_EWEN 0x04 +#define EMBCMD_EWR 0x02 +#define EMBCMD_ERD 0x01 + +/* + * Bits in TESTCFG register + */ + +#define TESTCFG_HBDIS 0x80 + +/* + * Bits in CHIPGCR register + */ + +#define CHIPGCR_FCGMII 0x80 /* force GMII (else MII only) */ +#define CHIPGCR_FCFDX 0x40 /* force full duplex */ +#define CHIPGCR_FCRESV 0x20 +#define CHIPGCR_FCMODE 0x10 /* enable MAC forced mode */ +#define CHIPGCR_LPSOPT 0x08 +#define CHIPGCR_TM1US 0x04 +#define CHIPGCR_TM0US 0x02 +#define CHIPGCR_PHYINTEN 0x01 + +/* + * Bits in WOLCR0 + */ + +#define WOLCR_MSWOLEN7 0x0080 /* enable pattern match filtering */ +#define WOLCR_MSWOLEN6 0x0040 +#define WOLCR_MSWOLEN5 0x0020 +#define WOLCR_MSWOLEN4 0x0010 +#define WOLCR_MSWOLEN3 0x0008 +#define WOLCR_MSWOLEN2 0x0004 +#define WOLCR_MSWOLEN1 0x0002 +#define WOLCR_MSWOLEN0 0x0001 +#define WOLCR_ARP_EN 0x0001 + +/* + * Bits in WOLCR1 + */ + +#define WOLCR_LINKOFF_EN 0x0800 /* link off detected enable */ +#define WOLCR_LINKON_EN 0x0400 /* link on detected enable */ +#define WOLCR_MAGIC_EN 0x0200 /* magic packet filter enable */ +#define WOLCR_UNICAST_EN 0x0100 /* unicast filter enable */ + + +/* + * Bits in PWCFG + */ + +#define PWCFG_PHYPWOPT 0x80 /* internal MII I/F timing */ +#define PWCFG_PCISTICK 0x40 /* PCI sticky R/W enable */ +#define PWCFG_WOLTYPE 0x20 /* pulse(1) or button (0) */ +#define PWCFG_LEGCY_WOL 0x10 +#define PWCFG_PMCSR_PME_SR 0x08 +#define PWCFG_PMCSR_PME_EN 0x04 /* control by PCISTICK */ +#define PWCFG_LEGACY_WOLSR 0x02 /* Legacy WOL_SR shadow */ +#define PWCFG_LEGACY_WOLEN 0x01 /* Legacy WOL_EN shadow */ + +/* + * Bits in WOLCFG + */ + +#define WOLCFG_PMEOVR 0x80 /* for legacy use, force PMEEN always */ +#define WOLCFG_SAM 0x20 /* accept multicast case reset, default=0 */ +#define WOLCFG_SAB 0x10 /* accept broadcast case reset, default=0 */ +#define WOLCFG_SMIIACC 0x08 /* ?? */ +#define WOLCFG_SGENWH 0x02 +#define WOLCFG_PHYINTEN 0x01 /* 0:PHYINT trigger enable, 1:use internal MII + to report status change */ +/* + * Bits in WOLSR1 + */ + +#define WOLSR_LINKOFF_INT 0x0800 +#define WOLSR_LINKON_INT 0x0400 +#define WOLSR_MAGIC_INT 0x0200 +#define WOLSR_UNICAST_INT 0x0100 + +/* + * Ethernet address filter type + */ + +#define PKT_TYPE_NONE 0x0000 /* Turn off receiver */ +#define PKT_TYPE_DIRECTED 0x0001 /* obselete, directed address is always accepted */ +#define PKT_TYPE_MULTICAST 0x0002 +#define PKT_TYPE_ALL_MULTICAST 0x0004 +#define PKT_TYPE_BROADCAST 0x0008 +#define PKT_TYPE_PROMISCUOUS 0x0020 +#define PKT_TYPE_LONG 0x2000 /* NOTE.... the definition of LONG is >2048 bytes in our chip */ +#define PKT_TYPE_RUNT 0x4000 +#define PKT_TYPE_ERROR 0x8000 /* Accept error packets, e.g. CRC error */ + +/* + * Loopback mode + */ + +#define MAC_LB_NONE 0x00 +#define MAC_LB_INTERNAL 0x01 +#define MAC_LB_EXTERNAL 0x02 + +/* + * Enabled mask value of irq + */ + +#if defined(_SIM) +#define IMR_MASK_VALUE 0x0033FF0FUL /* initial value of IMR + set IMR0 to 0x0F according to spec */ + +#else +#define IMR_MASK_VALUE 0x0013FB0FUL /* initial value of IMR + ignore MIBFI,RACEI to + reduce intr. frequency + NOTE.... do not enable NoBuf int mask at driver driver + when (1) NoBuf -> RxThreshold = SF + (2) OK -> RxThreshold = original value + */ +#endif + +/* + * Revision id + */ + +#define REV_ID_VT3119_A0 0x00 +#define REV_ID_VT3119_A1 0x01 +#define REV_ID_VT3216_A0 0x10 + +/* + * Max time out delay time + */ + +#define W_MAX_TIMEOUT 0x0FFFU + + +/* + * MAC registers as a structure. Cannot be directly accessed this + * way but generates offsets for readl/writel() calls + */ + +struct mac_regs { + volatile u8 PAR[6]; /* 0x00 */ + volatile u8 RCR; + volatile u8 TCR; + + volatile __le32 CR0Set; /* 0x08 */ + volatile __le32 CR0Clr; /* 0x0C */ + + volatile u8 MARCAM[8]; /* 0x10 */ + + volatile __le32 DecBaseHi; /* 0x18 */ + volatile __le16 DbfBaseHi; /* 0x1C */ + volatile __le16 reserved_1E; + + volatile __le16 ISRCTL; /* 0x20 */ + volatile u8 TXESR; + volatile u8 RXESR; + + volatile __le32 ISR; /* 0x24 */ + volatile __le32 IMR; + + volatile __le32 TDStatusPort; /* 0x2C */ + + volatile __le16 TDCSRSet; /* 0x30 */ + volatile u8 RDCSRSet; + volatile u8 reserved_33; + volatile __le16 TDCSRClr; + volatile u8 RDCSRClr; + volatile u8 reserved_37; + + volatile __le32 RDBaseLo; /* 0x38 */ + volatile __le16 RDIdx; /* 0x3C */ + volatile u8 TQETMR; /* 0x3E, VT3216 and above only */ + volatile u8 RQETMR; /* 0x3F, VT3216 and above only */ + + volatile __le32 TDBaseLo[4]; /* 0x40 */ + + volatile __le16 RDCSize; /* 0x50 */ + volatile __le16 TDCSize; /* 0x52 */ + volatile __le16 TDIdx[4]; /* 0x54 */ + volatile __le16 tx_pause_timer; /* 0x5C */ + volatile __le16 RBRDU; /* 0x5E */ + + volatile __le32 FIFOTest0; /* 0x60 */ + volatile __le32 FIFOTest1; /* 0x64 */ + + volatile u8 CAMADDR; /* 0x68 */ + volatile u8 CAMCR; /* 0x69 */ + volatile u8 GFTEST; /* 0x6A */ + volatile u8 FTSTCMD; /* 0x6B */ + + volatile u8 MIICFG; /* 0x6C */ + volatile u8 MIISR; + volatile u8 PHYSR0; + volatile u8 PHYSR1; + volatile u8 MIICR; + volatile u8 MIIADR; + volatile __le16 MIIDATA; + + volatile __le16 SoftTimer0; /* 0x74 */ + volatile __le16 SoftTimer1; + + volatile u8 CFGA; /* 0x78 */ + volatile u8 CFGB; + volatile u8 CFGC; + volatile u8 CFGD; + + volatile __le16 DCFG; /* 0x7C */ + volatile __le16 MCFG; + + volatile u8 TBIST; /* 0x80 */ + volatile u8 RBIST; + volatile u8 PMCPORT; + volatile u8 STICKHW; + + volatile u8 MIBCR; /* 0x84 */ + volatile u8 reserved_85; + volatile u8 rev_id; + volatile u8 PORSTS; + + volatile __le32 MIBData; /* 0x88 */ + + volatile __le16 EEWrData; + + volatile u8 reserved_8E; + volatile u8 BPMDWr; + volatile u8 BPCMD; + volatile u8 BPMDRd; + + volatile u8 EECHKSUM; /* 0x92 */ + volatile u8 EECSR; + + volatile __le16 EERdData; /* 0x94 */ + volatile u8 EADDR; + volatile u8 EMBCMD; + + + volatile u8 JMPSR0; /* 0x98 */ + volatile u8 JMPSR1; + volatile u8 JMPSR2; + volatile u8 JMPSR3; + volatile u8 CHIPGSR; /* 0x9C */ + volatile u8 TESTCFG; + volatile u8 DEBUG; + volatile u8 CHIPGCR; + + volatile __le16 WOLCRSet; /* 0xA0 */ + volatile u8 PWCFGSet; + volatile u8 WOLCFGSet; + + volatile __le16 WOLCRClr; /* 0xA4 */ + volatile u8 PWCFGCLR; + volatile u8 WOLCFGClr; + + volatile __le16 WOLSRSet; /* 0xA8 */ + volatile __le16 reserved_AA; + + volatile __le16 WOLSRClr; /* 0xAC */ + volatile __le16 reserved_AE; + + volatile __le16 PatternCRC[8]; /* 0xB0 */ + volatile __le32 ByteMask[4][4]; /* 0xC0 */ +}; + + +enum hw_mib { + HW_MIB_ifRxAllPkts = 0, + HW_MIB_ifRxOkPkts, + HW_MIB_ifTxOkPkts, + HW_MIB_ifRxErrorPkts, + HW_MIB_ifRxRuntOkPkt, + HW_MIB_ifRxRuntErrPkt, + HW_MIB_ifRx64Pkts, + HW_MIB_ifTx64Pkts, + HW_MIB_ifRx65To127Pkts, + HW_MIB_ifTx65To127Pkts, + HW_MIB_ifRx128To255Pkts, + HW_MIB_ifTx128To255Pkts, + HW_MIB_ifRx256To511Pkts, + HW_MIB_ifTx256To511Pkts, + HW_MIB_ifRx512To1023Pkts, + HW_MIB_ifTx512To1023Pkts, + HW_MIB_ifRx1024To1518Pkts, + HW_MIB_ifTx1024To1518Pkts, + HW_MIB_ifTxEtherCollisions, + HW_MIB_ifRxPktCRCE, + HW_MIB_ifRxJumboPkts, + HW_MIB_ifTxJumboPkts, + HW_MIB_ifRxMacControlFrames, + HW_MIB_ifTxMacControlFrames, + HW_MIB_ifRxPktFAE, + HW_MIB_ifRxLongOkPkt, + HW_MIB_ifRxLongPktErrPkt, + HW_MIB_ifTXSQEErrors, + HW_MIB_ifRxNobuf, + HW_MIB_ifRxSymbolErrors, + HW_MIB_ifInRangeLengthErrors, + HW_MIB_ifLateCollisions, + HW_MIB_SIZE +}; + +enum chip_type { + CHIP_TYPE_VT6110 = 1, +}; + +struct velocity_info_tbl { + enum chip_type chip_id; + const char *name; + int txqueue; + u32 flags; +}; + +#define mac_hw_mibs_init(regs) {\ + BYTE_REG_BITS_ON(MIBCR_MIBFRZ,&((regs)->MIBCR));\ + BYTE_REG_BITS_ON(MIBCR_MIBCLR,&((regs)->MIBCR));\ + do {}\ + while (BYTE_REG_BITS_IS_ON(MIBCR_MIBCLR,&((regs)->MIBCR)));\ + BYTE_REG_BITS_OFF(MIBCR_MIBFRZ,&((regs)->MIBCR));\ +} + +#define mac_read_isr(regs) readl(&((regs)->ISR)) +#define mac_write_isr(regs, x) writel((x),&((regs)->ISR)) +#define mac_clear_isr(regs) writel(0xffffffffL,&((regs)->ISR)) + +#define mac_write_int_mask(mask, regs) writel((mask),&((regs)->IMR)); +#define mac_disable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Clr)) +#define mac_enable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Set)) + +#define mac_set_dma_length(regs, n) {\ + BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\ +} + +#define mac_set_rx_thresh(regs, n) {\ + BYTE_REG_BITS_SET((n),(MCFG_RFT0|MCFG_RFT1),&((regs)->MCFG));\ +} + +#define mac_rx_queue_run(regs) {\ + writeb(TRDCSR_RUN, &((regs)->RDCSRSet));\ +} + +#define mac_rx_queue_wake(regs) {\ + writeb(TRDCSR_WAK, &((regs)->RDCSRSet));\ +} + +#define mac_tx_queue_run(regs, n) {\ + writew(TRDCSR_RUN<<((n)*4),&((regs)->TDCSRSet));\ +} + +#define mac_tx_queue_wake(regs, n) {\ + writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\ +} + +static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) { + int i=0; + + BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR)); + do { + udelay(10); + if (i++>0x1000) + break; + } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR))); +} + +/* + * Header for WOL definitions. Used to compute hashes + */ + +typedef u8 MCAM_ADDR[ETH_ALEN]; + +struct arp_packet { + u8 dest_mac[ETH_ALEN]; + u8 src_mac[ETH_ALEN]; + __be16 type; + __be16 ar_hrd; + __be16 ar_pro; + u8 ar_hln; + u8 ar_pln; + __be16 ar_op; + u8 ar_sha[ETH_ALEN]; + u8 ar_sip[4]; + u8 ar_tha[ETH_ALEN]; + u8 ar_tip[4]; +} __packed; + +struct _magic_packet { + u8 dest_mac[6]; + u8 src_mac[6]; + __be16 type; + u8 MAC[16][6]; + u8 password[6]; +} __packed; + +/* + * Store for chip context when saving and restoring status. Not + * all fields are saved/restored currently. + */ + +struct velocity_context { + u8 mac_reg[256]; + MCAM_ADDR cam_addr[MCAM_SIZE]; + u16 vcam[VCAM_SIZE]; + u32 cammask[2]; + u32 patcrc[2]; + u32 pattern[8]; +}; + +/* + * Registers in the MII (offset unit is WORD) + */ + +// Marvell 88E1000/88E1000S +#define MII_REG_PSCR 0x10 // PHY specific control register + +// +// Bits in the Silicon revision register +// + +#define TCSR_ECHODIS 0x2000 // +#define AUXCR_MDPPS 0x0004 // + +// Bits in the PLED register +#define PLED_LALBE 0x0004 // + +// Marvell 88E1000/88E1000S Bits in the PHY specific control register (10h) +#define PSCR_ACRSTX 0x0800 // Assert CRS on Transmit + +#define PHYID_CICADA_CS8201 0x000FC410UL +#define PHYID_VT3216_32BIT 0x000FC610UL +#define PHYID_VT3216_64BIT 0x000FC600UL +#define PHYID_MARVELL_1000 0x01410C50UL +#define PHYID_MARVELL_1000S 0x01410C40UL + +#define PHYID_REV_ID_MASK 0x0000000FUL + +#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK) + +#define MII_REG_BITS_ON(x,i,p) do {\ + u16 w;\ + velocity_mii_read((p),(i),&(w));\ + (w)|=(x);\ + velocity_mii_write((p),(i),(w));\ +} while (0) + +#define MII_REG_BITS_OFF(x,i,p) do {\ + u16 w;\ + velocity_mii_read((p),(i),&(w));\ + (w)&=(~(x));\ + velocity_mii_write((p),(i),(w));\ +} while (0) + +#define MII_REG_BITS_IS_ON(x,i,p) ({\ + u16 w;\ + velocity_mii_read((p),(i),&(w));\ + ((int) ((w) & (x)));}) + +#define MII_GET_PHY_ID(p) ({\ + u32 id;\ + velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\ + velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\ + (id);}) + +/* + * Inline debug routine + */ + + +enum velocity_msg_level { + MSG_LEVEL_ERR = 0, //Errors that will cause abnormal operation. + MSG_LEVEL_NOTICE = 1, //Some errors need users to be notified. + MSG_LEVEL_INFO = 2, //Normal message. + MSG_LEVEL_VERBOSE = 3, //Will report all trival errors. + MSG_LEVEL_DEBUG = 4 //Only for debug purpose. +}; + +#ifdef VELOCITY_DEBUG +#define ASSERT(x) { \ + if (!(x)) { \ + printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\ + __func__, __LINE__);\ + BUG(); \ + }\ +} +#define VELOCITY_DBG(p,args...) printk(p, ##args) +#else +#define ASSERT(x) +#define VELOCITY_DBG(x) +#endif + +#define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0) + +#define VELOCITY_PRT_CAMMASK(p,t) {\ + int i;\ + if ((t)==VELOCITY_MULTICAST_CAM) {\ + for (i=0;i<(MCAM_SIZE/8);i++)\ + printk("%02X",(p)->mCAMmask[i]);\ + }\ + else {\ + for (i=0;i<(VCAM_SIZE/8);i++)\ + printk("%02X",(p)->vCAMmask[i]);\ + }\ + printk("\n");\ +} + + + +#define VELOCITY_WOL_MAGIC 0x00000000UL +#define VELOCITY_WOL_PHY 0x00000001UL +#define VELOCITY_WOL_ARP 0x00000002UL +#define VELOCITY_WOL_UCAST 0x00000004UL +#define VELOCITY_WOL_BCAST 0x00000010UL +#define VELOCITY_WOL_MCAST 0x00000020UL +#define VELOCITY_WOL_MAGIC_SEC 0x00000040UL + +/* + * Flags for options + */ + +#define VELOCITY_FLAGS_TAGGING 0x00000001UL +#define VELOCITY_FLAGS_RX_CSUM 0x00000004UL +#define VELOCITY_FLAGS_IP_ALIGN 0x00000008UL +#define VELOCITY_FLAGS_VAL_PKT_LEN 0x00000010UL + +#define VELOCITY_FLAGS_FLOW_CTRL 0x01000000UL + +/* + * Flags for driver status + */ + +#define VELOCITY_FLAGS_OPENED 0x00010000UL +#define VELOCITY_FLAGS_VMNS_CONNECTED 0x00020000UL +#define VELOCITY_FLAGS_VMNS_COMMITTED 0x00040000UL +#define VELOCITY_FLAGS_WOL_ENABLED 0x00080000UL + +/* + * Flags for MII status + */ + +#define VELOCITY_LINK_FAIL 0x00000001UL +#define VELOCITY_SPEED_10 0x00000002UL +#define VELOCITY_SPEED_100 0x00000004UL +#define VELOCITY_SPEED_1000 0x00000008UL +#define VELOCITY_DUPLEX_FULL 0x00000010UL +#define VELOCITY_AUTONEG_ENABLE 0x00000020UL +#define VELOCITY_FORCED_BY_EEPROM 0x00000040UL + +/* + * For velocity_set_media_duplex + */ + +#define VELOCITY_LINK_CHANGE 0x00000001UL + +enum speed_opt { + SPD_DPX_AUTO = 0, + SPD_DPX_100_HALF = 1, + SPD_DPX_100_FULL = 2, + SPD_DPX_10_HALF = 3, + SPD_DPX_10_FULL = 4, + SPD_DPX_1000_FULL = 5 +}; + +enum velocity_init_type { + VELOCITY_INIT_COLD = 0, + VELOCITY_INIT_RESET, + VELOCITY_INIT_WOL +}; + +enum velocity_flow_cntl_type { + FLOW_CNTL_DEFAULT = 1, + FLOW_CNTL_TX, + FLOW_CNTL_RX, + FLOW_CNTL_TX_RX, + FLOW_CNTL_DISABLE, +}; + +struct velocity_opt { + int numrx; /* Number of RX descriptors */ + int numtx; /* Number of TX descriptors */ + enum speed_opt spd_dpx; /* Media link mode */ + + int DMA_length; /* DMA length */ + int rx_thresh; /* RX_THRESH */ + int flow_cntl; + int wol_opts; /* Wake on lan options */ + int td_int_count; + int int_works; + int rx_bandwidth_hi; + int rx_bandwidth_lo; + int rx_bandwidth_en; + int rxqueue_timer; + int txqueue_timer; + int tx_intsup; + int rx_intsup; + u32 flags; +}; + +#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->tx.used[(q)])) + +#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx]) + +struct velocity_info { + struct pci_dev *pdev; + struct net_device *dev; + + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + u8 ip_addr[4]; + enum chip_type chip_id; + + struct mac_regs __iomem * mac_regs; + unsigned long memaddr; + unsigned long ioaddr; + + struct tx_info { + int numq; + + /* FIXME: the locality of the data seems rather poor. */ + int used[TX_QUEUE_NO]; + int curr[TX_QUEUE_NO]; + int tail[TX_QUEUE_NO]; + struct tx_desc *rings[TX_QUEUE_NO]; + struct velocity_td_info *infos[TX_QUEUE_NO]; + dma_addr_t pool_dma[TX_QUEUE_NO]; + } tx; + + struct rx_info { + int buf_sz; + + int dirty; + int curr; + u32 filled; + struct rx_desc *ring; + struct velocity_rd_info *info; /* It's an array */ + dma_addr_t pool_dma; + } rx; + + u32 mib_counter[MAX_HW_MIB_COUNTER]; + struct velocity_opt options; + + u32 int_mask; + + u32 flags; + + u32 mii_status; + u32 phy_id; + int multicast_limit; + + u8 vCAMmask[(VCAM_SIZE / 8)]; + u8 mCAMmask[(MCAM_SIZE / 8)]; + + spinlock_t lock; + + int wol_opts; + u8 wol_passwd[6]; + + struct velocity_context context; + + u32 ticks; + + u8 rev_id; + + struct napi_struct napi; +}; + +/** + * velocity_get_ip - find an IP address for the device + * @vptr: Velocity to query + * + * Dig out an IP address for this interface so that we can + * configure wakeup with WOL for ARP. If there are multiple IP + * addresses on this chain then we use the first - multi-IP WOL is not + * supported. + * + */ + +static inline int velocity_get_ip(struct velocity_info *vptr) +{ + struct in_device *in_dev; + struct in_ifaddr *ifa; + int res = -ENOENT; + + rcu_read_lock(); + in_dev = __in_dev_get_rcu(vptr->dev); + if (in_dev != NULL) { + ifa = (struct in_ifaddr *) in_dev->ifa_list; + if (ifa != NULL) { + memcpy(vptr->ip_addr, &ifa->ifa_address, 4); + res = 0; + } + } + rcu_read_unlock(); + return res; +} + +/** + * velocity_update_hw_mibs - fetch MIB counters from chip + * @vptr: velocity to update + * + * The velocity hardware keeps certain counters in the hardware + * side. We need to read these when the user asks for statistics + * or when they overflow (causing an interrupt). The read of the + * statistic clears it, so we keep running master counters in user + * space. + */ + +static inline void velocity_update_hw_mibs(struct velocity_info *vptr) +{ + u32 tmp; + int i; + BYTE_REG_BITS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR)); + + while (BYTE_REG_BITS_IS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR))); + + BYTE_REG_BITS_ON(MIBCR_MPTRINI, &(vptr->mac_regs->MIBCR)); + for (i = 0; i < HW_MIB_SIZE; i++) { + tmp = readl(&(vptr->mac_regs->MIBData)) & 0x00FFFFFFUL; + vptr->mib_counter[i] += tmp; + } +} + +/** + * init_flow_control_register - set up flow control + * @vptr: velocity to configure + * + * Configure the flow control registers for this velocity device. + */ + +static inline void init_flow_control_register(struct velocity_info *vptr) +{ + struct mac_regs __iomem * regs = vptr->mac_regs; + + /* Set {XHITH1, XHITH0, XLTH1, XLTH0} in FlowCR1 to {1, 0, 1, 1} + depend on RD=64, and Turn on XNOEN in FlowCR1 */ + writel((CR0_XONEN | CR0_XHITH1 | CR0_XLTH1 | CR0_XLTH0), ®s->CR0Set); + writel((CR0_FDXTFCEN | CR0_FDXRFCEN | CR0_HDXFCEN | CR0_XHITH0), ®s->CR0Clr); + + /* Set TxPauseTimer to 0xFFFF */ + writew(0xFFFF, ®s->tx_pause_timer); + + /* Initialize RBRDU to Rx buffer count. */ + writew(vptr->options.numrx, ®s->RBRDU); +} + + +#endif diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c deleted file mode 100644 index 7f23ab913fd9..000000000000 --- a/drivers/net/via-rhine.c +++ /dev/null @@ -1,2340 +0,0 @@ -/* via-rhine.c: A Linux Ethernet device driver for VIA Rhine family chips. */ -/* - Written 1998-2001 by Donald Becker. - - Current Maintainer: Roger Luethi - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. - - This driver is designed for the VIA VT86C100A Rhine-I. - It also works with the Rhine-II (6102) and Rhine-III (6105/6105L/6105LOM - and management NIC 6105M). - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This driver contains some changes from the original Donald Becker - version. He may or may not be interested in bug reports on this - code. You can find his versions at: - http://www.scyld.com/network/via-rhine.html - [link no longer provides useful info -jgarzik] - -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#define DRV_NAME "via-rhine" -#define DRV_VERSION "1.5.0" -#define DRV_RELDATE "2010-10-09" - - -/* A few user-configurable values. - These may be modified when a driver module is loaded. */ - -#define DEBUG -static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ -static int max_interrupt_work = 20; - -/* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. */ -#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \ - defined(CONFIG_SPARC) || defined(__ia64__) || \ - defined(__sh__) || defined(__mips__) -static int rx_copybreak = 1518; -#else -static int rx_copybreak; -#endif - -/* Work-around for broken BIOSes: they are unable to get the chip back out of - power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ -static int avoid_D3; - -/* - * In case you are looking for 'options[]' or 'full_duplex[]', they - * are gone. Use ethtool(8) instead. - */ - -/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). - The Rhine has a 64 element 8390-like hash table. */ -static const int multicast_filter_limit = 32; - - -/* Operational parameters that are set at compile time. */ - -/* Keep the ring sizes a power of two for compile efficiency. - The compiler will convert '%'<2^N> into a bit mask. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority. - There are no ill effects from too-large receive rings. */ -#define TX_RING_SIZE 16 -#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */ -#define RX_RING_SIZE 64 - -/* Operational parameters that usually are not changed. */ - -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (2*HZ) - -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* Processor type for cache alignment. */ -#include -#include -#include -#include - -/* These identify the driver base version and may not be removed. */ -static const char version[] __devinitconst = - "v1.10-LK" DRV_VERSION " " DRV_RELDATE " Written by Donald Becker"; - -/* This driver was written to use PCI memory space. Some early versions - of the Rhine may only work correctly with I/O space accesses. */ -#ifdef CONFIG_VIA_RHINE_MMIO -#define USE_MMIO -#else -#endif - -MODULE_AUTHOR("Donald Becker "); -MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver"); -MODULE_LICENSE("GPL"); - -module_param(max_interrupt_work, int, 0); -module_param(debug, int, 0); -module_param(rx_copybreak, int, 0); -module_param(avoid_D3, bool, 0); -MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); -MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); -MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); - -#define MCAM_SIZE 32 -#define VCAM_SIZE 32 - -/* - Theory of Operation - -I. Board Compatibility - -This driver is designed for the VIA 86c100A Rhine-II PCI Fast Ethernet -controller. - -II. Board-specific settings - -Boards with this chip are functional only in a bus-master PCI slot. - -Many operational settings are loaded from the EEPROM to the Config word at -offset 0x78. For most of these settings, this driver assumes that they are -correct. -If this driver is compiled to use PCI memory space operations the EEPROM -must be configured to enable memory ops. - -III. Driver operation - -IIIa. Ring buffers - -This driver uses two statically allocated fixed-size descriptor lists -formed into rings by a branch from the final descriptor to the beginning of -the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. - -IIIb/c. Transmit/Receive Structure - -This driver attempts to use a zero-copy receive and transmit scheme. - -Alas, all data buffers are required to start on a 32 bit boundary, so -the driver must often copy transmit packets into bounce buffers. - -The driver allocates full frame size skbuffs for the Rx ring buffers at -open() time and passes the skb->data field to the chip as receive data -buffers. When an incoming frame is less than RX_COPYBREAK bytes long, -a fresh skbuff is allocated and the frame is copied to the new skbuff. -When the incoming frame is larger, the skbuff is passed directly up the -protocol stack. Buffers consumed this way are replaced by newly allocated -skbuffs in the last phase of rhine_rx(). - -The RX_COPYBREAK value is chosen to trade-off the memory wasted by -using a full-sized skbuff for small frames vs. the copying costs of larger -frames. New boards are typically used in generously configured machines -and the underfilled buffers have negligible impact compared to the benefit of -a single allocation size, so the default value of zero results in never -copying packets. When copying is done, the cost is usually mitigated by using -a combined copy/checksum routine. Copying also preloads the cache, which is -most useful with small frames. - -Since the VIA chips are only able to transfer data to buffers on 32 bit -boundaries, the IP header at offset 14 in an ethernet frame isn't -longword aligned for further processing. Copying these unaligned buffers -has the beneficial effect of 16-byte aligning the IP header. - -IIId. Synchronization - -The driver runs as two independent, single-threaded flows of control. One -is the send-packet routine, which enforces single-threaded use by the -netdev_priv(dev)->lock spinlock. The other thread is the interrupt handler, -which is single threaded by the hardware and interrupt handling software. - -The send packet thread has partial control over the Tx ring. It locks the -netdev_priv(dev)->lock whenever it's queuing a Tx packet. If the next slot in -the ring is not available it stops the transmit queue by -calling netif_stop_queue. - -The interrupt handler has exclusive control over the Rx ring and records stats -from the Tx ring. After reaping the stats, it marks the Tx queue entry as -empty by incrementing the dirty_tx mark. If at least half of the entries in -the Rx ring are available the transmit queue is woken up if it was stopped. - -IV. Notes - -IVb. References - -Preliminary VT86C100A manual from http://www.via.com.tw/ -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html -ftp://ftp.via.com.tw/public/lan/Products/NIC/VT86C100A/Datasheet/VT86C100A03.pdf -ftp://ftp.via.com.tw/public/lan/Products/NIC/VT6102/Datasheet/VT6102_021.PDF - - -IVc. Errata - -The VT86C100A manual is not reliable information. -The 3043 chip does not handle unaligned transmit or receive buffers, resulting -in significant performance degradation for bounce buffer copies on transmit -and unaligned IP headers on receive. -The chip does not pad to minimum transmit length. - -*/ - - -/* This table drives the PCI probe routines. It's mostly boilerplate in all - of the drivers, and will likely be provided by some future kernel. - Note the matching code -- the first table entry matchs all 56** cards but - second only the 1234 card. -*/ - -enum rhine_revs { - VT86C100A = 0x00, - VTunknown0 = 0x20, - VT6102 = 0x40, - VT8231 = 0x50, /* Integrated MAC */ - VT8233 = 0x60, /* Integrated MAC */ - VT8235 = 0x74, /* Integrated MAC */ - VT8237 = 0x78, /* Integrated MAC */ - VTunknown1 = 0x7C, - VT6105 = 0x80, - VT6105_B0 = 0x83, - VT6105L = 0x8A, - VT6107 = 0x8C, - VTunknown2 = 0x8E, - VT6105M = 0x90, /* Management adapter */ -}; - -enum rhine_quirks { - rqWOL = 0x0001, /* Wake-On-LAN support */ - rqForceReset = 0x0002, - rq6patterns = 0x0040, /* 6 instead of 4 patterns for WOL */ - rqStatusWBRace = 0x0080, /* Tx Status Writeback Error possible */ - rqRhineI = 0x0100, /* See comment below */ -}; -/* - * rqRhineI: VT86C100A (aka Rhine-I) uses different bits to enable - * MMIO as well as for the collision counter and the Tx FIFO underflow - * indicator. In addition, Tx and Rx buffers need to 4 byte aligned. - */ - -/* Beware of PCI posted writes */ -#define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) - -static DEFINE_PCI_DEVICE_TABLE(rhine_pci_tbl) = { - { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ - { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ - { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ - { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); - - -/* Offsets to the device registers. */ -enum register_offsets { - StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08, - ChipCmd1=0x09, TQWake=0x0A, - IntrStatus=0x0C, IntrEnable=0x0E, - MulticastFilter0=0x10, MulticastFilter1=0x14, - RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54, - MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F, - MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74, - ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B, - RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81, - StickyHW=0x83, IntrStatus2=0x84, - CamMask=0x88, CamCon=0x92, CamAddr=0x93, - WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4, - WOLcrClr1=0xA6, WOLcgClr=0xA7, - PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD, -}; - -/* Bits in ConfigD */ -enum backoff_bits { - BackOptional=0x01, BackModify=0x02, - BackCaptureEffect=0x04, BackRandom=0x08 -}; - -/* Bits in the TxConfig (TCR) register */ -enum tcr_bits { - TCR_PQEN=0x01, - TCR_LB0=0x02, /* loopback[0] */ - TCR_LB1=0x04, /* loopback[1] */ - TCR_OFSET=0x08, - TCR_RTGOPT=0x10, - TCR_RTFT0=0x20, - TCR_RTFT1=0x40, - TCR_RTSF=0x80, -}; - -/* Bits in the CamCon (CAMC) register */ -enum camcon_bits { - CAMC_CAMEN=0x01, - CAMC_VCAMSL=0x02, - CAMC_CAMWR=0x04, - CAMC_CAMRD=0x08, -}; - -/* Bits in the PCIBusConfig1 (BCR1) register */ -enum bcr1_bits { - BCR1_POT0=0x01, - BCR1_POT1=0x02, - BCR1_POT2=0x04, - BCR1_CTFT0=0x08, - BCR1_CTFT1=0x10, - BCR1_CTSF=0x20, - BCR1_TXQNOBK=0x40, /* for VT6105 */ - BCR1_VIDFR=0x80, /* for VT6105 */ - BCR1_MED0=0x40, /* for VT6102 */ - BCR1_MED1=0x80, /* for VT6102 */ -}; - -#ifdef USE_MMIO -/* Registers we check that mmio and reg are the same. */ -static const int mmio_verify_registers[] = { - RxConfig, TxConfig, IntrEnable, ConfigA, ConfigB, ConfigC, ConfigD, - 0 -}; -#endif - -/* Bits in the interrupt status/mask registers. */ -enum intr_status_bits { - IntrRxDone=0x0001, IntrRxErr=0x0004, IntrRxEmpty=0x0020, - IntrTxDone=0x0002, IntrTxError=0x0008, IntrTxUnderrun=0x0210, - IntrPCIErr=0x0040, - IntrStatsMax=0x0080, IntrRxEarly=0x0100, - IntrRxOverflow=0x0400, IntrRxDropped=0x0800, IntrRxNoBuf=0x1000, - IntrTxAborted=0x2000, IntrLinkChange=0x4000, - IntrRxWakeUp=0x8000, - IntrNormalSummary=0x0003, IntrAbnormalSummary=0xC260, - IntrTxDescRace=0x080000, /* mapped from IntrStatus2 */ - IntrTxErrSummary=0x082218, -}; - -/* Bits in WOLcrSet/WOLcrClr and PwrcsrSet/PwrcsrClr */ -enum wol_bits { - WOLucast = 0x10, - WOLmagic = 0x20, - WOLbmcast = 0x30, - WOLlnkon = 0x40, - WOLlnkoff = 0x80, -}; - -/* The Rx and Tx buffer descriptors. */ -struct rx_desc { - __le32 rx_status; - __le32 desc_length; /* Chain flag, Buffer/frame length */ - __le32 addr; - __le32 next_desc; -}; -struct tx_desc { - __le32 tx_status; - __le32 desc_length; /* Chain flag, Tx Config, Frame length */ - __le32 addr; - __le32 next_desc; -}; - -/* Initial value for tx_desc.desc_length, Buffer size goes to bits 0-10 */ -#define TXDESC 0x00e08000 - -enum rx_status_bits { - RxOK=0x8000, RxWholePkt=0x0300, RxErr=0x008F -}; - -/* Bits in *_desc.*_status */ -enum desc_status_bits { - DescOwn=0x80000000 -}; - -/* Bits in *_desc.*_length */ -enum desc_length_bits { - DescTag=0x00010000 -}; - -/* Bits in ChipCmd. */ -enum chip_cmd_bits { - CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08, - CmdTxOn=0x10, Cmd1TxDemand=0x20, CmdRxDemand=0x40, - Cmd1EarlyRx=0x01, Cmd1EarlyTx=0x02, Cmd1FDuplex=0x04, - Cmd1NoTxPoll=0x08, Cmd1Reset=0x80, -}; - -struct rhine_private { - /* Bit mask for configured VLAN ids */ - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; - - /* Descriptor rings */ - struct rx_desc *rx_ring; - struct tx_desc *tx_ring; - dma_addr_t rx_ring_dma; - dma_addr_t tx_ring_dma; - - /* The addresses of receive-in-place skbuffs. */ - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - dma_addr_t rx_skbuff_dma[RX_RING_SIZE]; - - /* The saved address of a sent-in-place packet/buffer, for later free(). */ - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - dma_addr_t tx_skbuff_dma[TX_RING_SIZE]; - - /* Tx bounce buffers (Rhine-I only) */ - unsigned char *tx_buf[TX_RING_SIZE]; - unsigned char *tx_bufs; - dma_addr_t tx_bufs_dma; - - struct pci_dev *pdev; - long pioaddr; - struct net_device *dev; - struct napi_struct napi; - spinlock_t lock; - struct work_struct reset_task; - - /* Frequently used values: keep some adjacent for cache effect. */ - u32 quirks; - struct rx_desc *rx_head_desc; - unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ - unsigned int cur_tx, dirty_tx; - unsigned int rx_buf_sz; /* Based on MTU+slack. */ - u8 wolopts; - - u8 tx_thresh, rx_thresh; - - struct mii_if_info mii_if; - void __iomem *base; -}; - -#define BYTE_REG_BITS_ON(x, p) do { iowrite8((ioread8((p))|(x)), (p)); } while (0) -#define WORD_REG_BITS_ON(x, p) do { iowrite16((ioread16((p))|(x)), (p)); } while (0) -#define DWORD_REG_BITS_ON(x, p) do { iowrite32((ioread32((p))|(x)), (p)); } while (0) - -#define BYTE_REG_BITS_IS_ON(x, p) (ioread8((p)) & (x)) -#define WORD_REG_BITS_IS_ON(x, p) (ioread16((p)) & (x)) -#define DWORD_REG_BITS_IS_ON(x, p) (ioread32((p)) & (x)) - -#define BYTE_REG_BITS_OFF(x, p) do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0) -#define WORD_REG_BITS_OFF(x, p) do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0) -#define DWORD_REG_BITS_OFF(x, p) do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0) - -#define BYTE_REG_BITS_SET(x, m, p) do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0) -#define WORD_REG_BITS_SET(x, m, p) do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0) -#define DWORD_REG_BITS_SET(x, m, p) do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0) - - -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static int rhine_open(struct net_device *dev); -static void rhine_reset_task(struct work_struct *work); -static void rhine_tx_timeout(struct net_device *dev); -static netdev_tx_t rhine_start_tx(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t rhine_interrupt(int irq, void *dev_instance); -static void rhine_tx(struct net_device *dev); -static int rhine_rx(struct net_device *dev, int limit); -static void rhine_error(struct net_device *dev, int intr_status); -static void rhine_set_rx_mode(struct net_device *dev); -static struct net_device_stats *rhine_get_stats(struct net_device *dev); -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static const struct ethtool_ops netdev_ethtool_ops; -static int rhine_close(struct net_device *dev); -static void rhine_shutdown (struct pci_dev *pdev); -static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); -static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); -static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr); -static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr); -static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask); -static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask); -static void rhine_init_cam_filter(struct net_device *dev); -static void rhine_update_vcam(struct net_device *dev); - -#define RHINE_WAIT_FOR(condition) \ -do { \ - int i = 1024; \ - while (!(condition) && --i) \ - ; \ - if (debug > 1 && i < 512) \ - pr_info("%4d cycles used @ %s:%d\n", \ - 1024 - i, __func__, __LINE__); \ -} while (0) - -static inline u32 get_intr_status(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - u32 intr_status; - - intr_status = ioread16(ioaddr + IntrStatus); - /* On Rhine-II, Bit 3 indicates Tx descriptor write-back race. */ - if (rp->quirks & rqStatusWBRace) - intr_status |= ioread8(ioaddr + IntrStatus2) << 16; - return intr_status; -} - -/* - * Get power related registers into sane state. - * Notify user about past WOL event. - */ -static void rhine_power_init(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - u16 wolstat; - - if (rp->quirks & rqWOL) { - /* Make sure chip is in power state D0 */ - iowrite8(ioread8(ioaddr + StickyHW) & 0xFC, ioaddr + StickyHW); - - /* Disable "force PME-enable" */ - iowrite8(0x80, ioaddr + WOLcgClr); - - /* Clear power-event config bits (WOL) */ - iowrite8(0xFF, ioaddr + WOLcrClr); - /* More recent cards can manage two additional patterns */ - if (rp->quirks & rq6patterns) - iowrite8(0x03, ioaddr + WOLcrClr1); - - /* Save power-event status bits */ - wolstat = ioread8(ioaddr + PwrcsrSet); - if (rp->quirks & rq6patterns) - wolstat |= (ioread8(ioaddr + PwrcsrSet1) & 0x03) << 8; - - /* Clear power-event status bits */ - iowrite8(0xFF, ioaddr + PwrcsrClr); - if (rp->quirks & rq6patterns) - iowrite8(0x03, ioaddr + PwrcsrClr1); - - if (wolstat) { - char *reason; - switch (wolstat) { - case WOLmagic: - reason = "Magic packet"; - break; - case WOLlnkon: - reason = "Link went up"; - break; - case WOLlnkoff: - reason = "Link went down"; - break; - case WOLucast: - reason = "Unicast packet"; - break; - case WOLbmcast: - reason = "Multicast/broadcast packet"; - break; - default: - reason = "Unknown"; - } - netdev_info(dev, "Woke system up. Reason: %s\n", - reason); - } - } -} - -static void rhine_chip_reset(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - iowrite8(Cmd1Reset, ioaddr + ChipCmd1); - IOSYNC; - - if (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) { - netdev_info(dev, "Reset not complete yet. Trying harder.\n"); - - /* Force reset */ - if (rp->quirks & rqForceReset) - iowrite8(0x40, ioaddr + MiscCmd); - - /* Reset can take somewhat longer (rare) */ - RHINE_WAIT_FOR(!(ioread8(ioaddr + ChipCmd1) & Cmd1Reset)); - } - - if (debug > 1) - netdev_info(dev, "Reset %s\n", - (ioread8(ioaddr + ChipCmd1) & Cmd1Reset) ? - "failed" : "succeeded"); -} - -#ifdef USE_MMIO -static void enable_mmio(long pioaddr, u32 quirks) -{ - int n; - if (quirks & rqRhineI) { - /* More recent docs say that this bit is reserved ... */ - n = inb(pioaddr + ConfigA) | 0x20; - outb(n, pioaddr + ConfigA); - } else { - n = inb(pioaddr + ConfigD) | 0x80; - outb(n, pioaddr + ConfigD); - } -} -#endif - -/* - * Loads bytes 0x00-0x05, 0x6E-0x6F, 0x78-0x7B from EEPROM - * (plus 0x6C for Rhine-I/II) - */ -static void __devinit rhine_reload_eeprom(long pioaddr, struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - outb(0x20, pioaddr + MACRegEEcsr); - RHINE_WAIT_FOR(!(inb(pioaddr + MACRegEEcsr) & 0x20)); - -#ifdef USE_MMIO - /* - * Reloading from EEPROM overwrites ConfigA-D, so we must re-enable - * MMIO. If reloading EEPROM was done first this could be avoided, but - * it is not known if that still works with the "win98-reboot" problem. - */ - enable_mmio(pioaddr, rp->quirks); -#endif - - /* Turn off EEPROM-controlled wake-up (magic packet) */ - if (rp->quirks & rqWOL) - iowrite8(ioread8(ioaddr + ConfigA) & 0xFC, ioaddr + ConfigA); - -} - -#ifdef CONFIG_NET_POLL_CONTROLLER -static void rhine_poll(struct net_device *dev) -{ - disable_irq(dev->irq); - rhine_interrupt(dev->irq, (void *)dev); - enable_irq(dev->irq); -} -#endif - -static int rhine_napipoll(struct napi_struct *napi, int budget) -{ - struct rhine_private *rp = container_of(napi, struct rhine_private, napi); - struct net_device *dev = rp->dev; - void __iomem *ioaddr = rp->base; - int work_done; - - work_done = rhine_rx(dev, budget); - - if (work_done < budget) { - napi_complete(napi); - - iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | - IntrRxDropped | IntrRxNoBuf | IntrTxAborted | - IntrTxDone | IntrTxError | IntrTxUnderrun | - IntrPCIErr | IntrStatsMax | IntrLinkChange, - ioaddr + IntrEnable); - } - return work_done; -} - -static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr) -{ - struct rhine_private *rp = netdev_priv(dev); - - /* Reset the chip to erase previous misconfiguration. */ - rhine_chip_reset(dev); - - /* Rhine-I needs extra time to recuperate before EEPROM reload */ - if (rp->quirks & rqRhineI) - msleep(5); - - /* Reload EEPROM controlled bytes cleared by soft reset */ - rhine_reload_eeprom(pioaddr, dev); -} - -static const struct net_device_ops rhine_netdev_ops = { - .ndo_open = rhine_open, - .ndo_stop = rhine_close, - .ndo_start_xmit = rhine_start_tx, - .ndo_get_stats = rhine_get_stats, - .ndo_set_multicast_list = rhine_set_rx_mode, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_do_ioctl = netdev_ioctl, - .ndo_tx_timeout = rhine_tx_timeout, - .ndo_vlan_rx_add_vid = rhine_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = rhine_vlan_rx_kill_vid, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = rhine_poll, -#endif -}; - -static int __devinit rhine_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct rhine_private *rp; - int i, rc; - u32 quirks; - long pioaddr; - long memaddr; - void __iomem *ioaddr; - int io_size, phy_id; - const char *name; -#ifdef USE_MMIO - int bar = 1; -#else - int bar = 0; -#endif - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - pr_info_once("%s\n", version); -#endif - - io_size = 256; - phy_id = 0; - quirks = 0; - name = "Rhine"; - if (pdev->revision < VTunknown0) { - quirks = rqRhineI; - io_size = 128; - } - else if (pdev->revision >= VT6102) { - quirks = rqWOL | rqForceReset; - if (pdev->revision < VT6105) { - name = "Rhine II"; - quirks |= rqStatusWBRace; /* Rhine-II exclusive */ - } - else { - phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */ - if (pdev->revision >= VT6105_B0) - quirks |= rq6patterns; - if (pdev->revision < VT6105M) - name = "Rhine III"; - else - name = "Rhine III (Management Adapter)"; - } - } - - rc = pci_enable_device(pdev); - if (rc) - goto err_out; - - /* this should always be supported */ - rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (rc) { - dev_err(&pdev->dev, - "32-bit PCI DMA addresses not supported by the card!?\n"); - goto err_out; - } - - /* sanity check */ - if ((pci_resource_len(pdev, 0) < io_size) || - (pci_resource_len(pdev, 1) < io_size)) { - rc = -EIO; - dev_err(&pdev->dev, "Insufficient PCI resources, aborting\n"); - goto err_out; - } - - pioaddr = pci_resource_start(pdev, 0); - memaddr = pci_resource_start(pdev, 1); - - pci_set_master(pdev); - - dev = alloc_etherdev(sizeof(struct rhine_private)); - if (!dev) { - rc = -ENOMEM; - dev_err(&pdev->dev, "alloc_etherdev failed\n"); - goto err_out; - } - SET_NETDEV_DEV(dev, &pdev->dev); - - rp = netdev_priv(dev); - rp->dev = dev; - rp->quirks = quirks; - rp->pioaddr = pioaddr; - rp->pdev = pdev; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out_free_netdev; - - ioaddr = pci_iomap(pdev, bar, io_size); - if (!ioaddr) { - rc = -EIO; - dev_err(&pdev->dev, - "ioremap failed for device %s, region 0x%X @ 0x%lX\n", - pci_name(pdev), io_size, memaddr); - goto err_out_free_res; - } - -#ifdef USE_MMIO - enable_mmio(pioaddr, quirks); - - /* Check that selected MMIO registers match the PIO ones */ - i = 0; - while (mmio_verify_registers[i]) { - int reg = mmio_verify_registers[i++]; - unsigned char a = inb(pioaddr+reg); - unsigned char b = readb(ioaddr+reg); - if (a != b) { - rc = -EIO; - dev_err(&pdev->dev, - "MMIO do not match PIO [%02x] (%02x != %02x)\n", - reg, a, b); - goto err_out_unmap; - } - } -#endif /* USE_MMIO */ - - dev->base_addr = (unsigned long)ioaddr; - rp->base = ioaddr; - - /* Get chip registers into a sane state */ - rhine_power_init(dev); - rhine_hw_init(dev, pioaddr); - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = ioread8(ioaddr + StationAddr + i); - - if (!is_valid_ether_addr(dev->dev_addr)) { - /* Report it and use a random ethernet address instead */ - netdev_err(dev, "Invalid MAC address: %pM\n", dev->dev_addr); - random_ether_addr(dev->dev_addr); - netdev_info(dev, "Using random MAC address: %pM\n", - dev->dev_addr); - } - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - - /* For Rhine-I/II, phy_id is loaded from EEPROM */ - if (!phy_id) - phy_id = ioread8(ioaddr + 0x6C); - - dev->irq = pdev->irq; - - spin_lock_init(&rp->lock); - INIT_WORK(&rp->reset_task, rhine_reset_task); - - rp->mii_if.dev = dev; - rp->mii_if.mdio_read = mdio_read; - rp->mii_if.mdio_write = mdio_write; - rp->mii_if.phy_id_mask = 0x1f; - rp->mii_if.reg_num_mask = 0x1f; - - /* The chip-specific entries in the device structure. */ - dev->netdev_ops = &rhine_netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops, - dev->watchdog_timeo = TX_TIMEOUT; - - netif_napi_add(dev, &rp->napi, rhine_napipoll, 64); - - if (rp->quirks & rqRhineI) - dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM; - - if (pdev->revision >= VT6105M) - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_FILTER; - - /* dev->name not defined before register_netdev()! */ - rc = register_netdev(dev); - if (rc) - goto err_out_unmap; - - netdev_info(dev, "VIA %s at 0x%lx, %pM, IRQ %d\n", - name, -#ifdef USE_MMIO - memaddr, -#else - (long)ioaddr, -#endif - dev->dev_addr, pdev->irq); - - pci_set_drvdata(pdev, dev); - - { - u16 mii_cmd; - int mii_status = mdio_read(dev, phy_id, 1); - mii_cmd = mdio_read(dev, phy_id, MII_BMCR) & ~BMCR_ISOLATE; - mdio_write(dev, phy_id, MII_BMCR, mii_cmd); - if (mii_status != 0xffff && mii_status != 0x0000) { - rp->mii_if.advertising = mdio_read(dev, phy_id, 4); - netdev_info(dev, - "MII PHY found at address %d, status 0x%04x advertising %04x Link %04x\n", - phy_id, - mii_status, rp->mii_if.advertising, - mdio_read(dev, phy_id, 5)); - - /* set IFF_RUNNING */ - if (mii_status & BMSR_LSTATUS) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - - } - } - rp->mii_if.phy_id = phy_id; - if (debug > 1 && avoid_D3) - netdev_info(dev, "No D3 power state at shutdown\n"); - - return 0; - -err_out_unmap: - pci_iounmap(pdev, ioaddr); -err_out_free_res: - pci_release_regions(pdev); -err_out_free_netdev: - free_netdev(dev); -err_out: - return rc; -} - -static int alloc_ring(struct net_device* dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void *ring; - dma_addr_t ring_dma; - - ring = pci_alloc_consistent(rp->pdev, - RX_RING_SIZE * sizeof(struct rx_desc) + - TX_RING_SIZE * sizeof(struct tx_desc), - &ring_dma); - if (!ring) { - netdev_err(dev, "Could not allocate DMA memory\n"); - return -ENOMEM; - } - if (rp->quirks & rqRhineI) { - rp->tx_bufs = pci_alloc_consistent(rp->pdev, - PKT_BUF_SZ * TX_RING_SIZE, - &rp->tx_bufs_dma); - if (rp->tx_bufs == NULL) { - pci_free_consistent(rp->pdev, - RX_RING_SIZE * sizeof(struct rx_desc) + - TX_RING_SIZE * sizeof(struct tx_desc), - ring, ring_dma); - return -ENOMEM; - } - } - - rp->rx_ring = ring; - rp->tx_ring = ring + RX_RING_SIZE * sizeof(struct rx_desc); - rp->rx_ring_dma = ring_dma; - rp->tx_ring_dma = ring_dma + RX_RING_SIZE * sizeof(struct rx_desc); - - return 0; -} - -static void free_ring(struct net_device* dev) -{ - struct rhine_private *rp = netdev_priv(dev); - - pci_free_consistent(rp->pdev, - RX_RING_SIZE * sizeof(struct rx_desc) + - TX_RING_SIZE * sizeof(struct tx_desc), - rp->rx_ring, rp->rx_ring_dma); - rp->tx_ring = NULL; - - if (rp->tx_bufs) - pci_free_consistent(rp->pdev, PKT_BUF_SZ * TX_RING_SIZE, - rp->tx_bufs, rp->tx_bufs_dma); - - rp->tx_bufs = NULL; - -} - -static void alloc_rbufs(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - dma_addr_t next; - int i; - - rp->dirty_rx = rp->cur_rx = 0; - - rp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32); - rp->rx_head_desc = &rp->rx_ring[0]; - next = rp->rx_ring_dma; - - /* Init the ring entries */ - for (i = 0; i < RX_RING_SIZE; i++) { - rp->rx_ring[i].rx_status = 0; - rp->rx_ring[i].desc_length = cpu_to_le32(rp->rx_buf_sz); - next += sizeof(struct rx_desc); - rp->rx_ring[i].next_desc = cpu_to_le32(next); - rp->rx_skbuff[i] = NULL; - } - /* Mark the last entry as wrapping the ring. */ - rp->rx_ring[i-1].next_desc = cpu_to_le32(rp->rx_ring_dma); - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = netdev_alloc_skb(dev, rp->rx_buf_sz); - rp->rx_skbuff[i] = skb; - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - - rp->rx_skbuff_dma[i] = - pci_map_single(rp->pdev, skb->data, rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - - rp->rx_ring[i].addr = cpu_to_le32(rp->rx_skbuff_dma[i]); - rp->rx_ring[i].rx_status = cpu_to_le32(DescOwn); - } - rp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); -} - -static void free_rbufs(struct net_device* dev) -{ - struct rhine_private *rp = netdev_priv(dev); - int i; - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - rp->rx_ring[i].rx_status = 0; - rp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ - if (rp->rx_skbuff[i]) { - pci_unmap_single(rp->pdev, - rp->rx_skbuff_dma[i], - rp->rx_buf_sz, PCI_DMA_FROMDEVICE); - dev_kfree_skb(rp->rx_skbuff[i]); - } - rp->rx_skbuff[i] = NULL; - } -} - -static void alloc_tbufs(struct net_device* dev) -{ - struct rhine_private *rp = netdev_priv(dev); - dma_addr_t next; - int i; - - rp->dirty_tx = rp->cur_tx = 0; - next = rp->tx_ring_dma; - for (i = 0; i < TX_RING_SIZE; i++) { - rp->tx_skbuff[i] = NULL; - rp->tx_ring[i].tx_status = 0; - rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); - next += sizeof(struct tx_desc); - rp->tx_ring[i].next_desc = cpu_to_le32(next); - if (rp->quirks & rqRhineI) - rp->tx_buf[i] = &rp->tx_bufs[i * PKT_BUF_SZ]; - } - rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma); - -} - -static void free_tbufs(struct net_device* dev) -{ - struct rhine_private *rp = netdev_priv(dev); - int i; - - for (i = 0; i < TX_RING_SIZE; i++) { - rp->tx_ring[i].tx_status = 0; - rp->tx_ring[i].desc_length = cpu_to_le32(TXDESC); - rp->tx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */ - if (rp->tx_skbuff[i]) { - if (rp->tx_skbuff_dma[i]) { - pci_unmap_single(rp->pdev, - rp->tx_skbuff_dma[i], - rp->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - } - dev_kfree_skb(rp->tx_skbuff[i]); - } - rp->tx_skbuff[i] = NULL; - rp->tx_buf[i] = NULL; - } -} - -static void rhine_check_media(struct net_device *dev, unsigned int init_media) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - mii_check_media(&rp->mii_if, debug, init_media); - - if (rp->mii_if.full_duplex) - iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1FDuplex, - ioaddr + ChipCmd1); - else - iowrite8(ioread8(ioaddr + ChipCmd1) & ~Cmd1FDuplex, - ioaddr + ChipCmd1); - if (debug > 1) - netdev_info(dev, "force_media %d, carrier %d\n", - rp->mii_if.force_media, netif_carrier_ok(dev)); -} - -/* Called after status of force_media possibly changed */ -static void rhine_set_carrier(struct mii_if_info *mii) -{ - if (mii->force_media) { - /* autoneg is off: Link is always assumed to be up */ - if (!netif_carrier_ok(mii->dev)) - netif_carrier_on(mii->dev); - } - else /* Let MMI library update carrier status */ - rhine_check_media(mii->dev, 0); - if (debug > 1) - netdev_info(mii->dev, "force_media %d, carrier %d\n", - mii->force_media, netif_carrier_ok(mii->dev)); -} - -/** - * rhine_set_cam - set CAM multicast filters - * @ioaddr: register block of this Rhine - * @idx: multicast CAM index [0..MCAM_SIZE-1] - * @addr: multicast address (6 bytes) - * - * Load addresses into multicast filters. - */ -static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr) -{ - int i; - - iowrite8(CAMC_CAMEN, ioaddr + CamCon); - wmb(); - - /* Paranoid -- idx out of range should never happen */ - idx &= (MCAM_SIZE - 1); - - iowrite8((u8) idx, ioaddr + CamAddr); - - for (i = 0; i < 6; i++, addr++) - iowrite8(*addr, ioaddr + MulticastFilter0 + i); - udelay(10); - wmb(); - - iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); - udelay(10); - - iowrite8(0, ioaddr + CamCon); -} - -/** - * rhine_set_vlan_cam - set CAM VLAN filters - * @ioaddr: register block of this Rhine - * @idx: VLAN CAM index [0..VCAM_SIZE-1] - * @addr: VLAN ID (2 bytes) - * - * Load addresses into VLAN filters. - */ -static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr) -{ - iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); - wmb(); - - /* Paranoid -- idx out of range should never happen */ - idx &= (VCAM_SIZE - 1); - - iowrite8((u8) idx, ioaddr + CamAddr); - - iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6); - udelay(10); - wmb(); - - iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon); - udelay(10); - - iowrite8(0, ioaddr + CamCon); -} - -/** - * rhine_set_cam_mask - set multicast CAM mask - * @ioaddr: register block of this Rhine - * @mask: multicast CAM mask - * - * Mask sets multicast filters active/inactive. - */ -static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask) -{ - iowrite8(CAMC_CAMEN, ioaddr + CamCon); - wmb(); - - /* write mask */ - iowrite32(mask, ioaddr + CamMask); - - /* disable CAMEN */ - iowrite8(0, ioaddr + CamCon); -} - -/** - * rhine_set_vlan_cam_mask - set VLAN CAM mask - * @ioaddr: register block of this Rhine - * @mask: VLAN CAM mask - * - * Mask sets VLAN filters active/inactive. - */ -static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask) -{ - iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon); - wmb(); - - /* write mask */ - iowrite32(mask, ioaddr + CamMask); - - /* disable CAMEN */ - iowrite8(0, ioaddr + CamCon); -} - -/** - * rhine_init_cam_filter - initialize CAM filters - * @dev: network device - * - * Initialize (disable) hardware VLAN and multicast support on this - * Rhine. - */ -static void rhine_init_cam_filter(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - /* Disable all CAMs */ - rhine_set_vlan_cam_mask(ioaddr, 0); - rhine_set_cam_mask(ioaddr, 0); - - /* disable hardware VLAN support */ - BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig); - BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); -} - -/** - * rhine_update_vcam - update VLAN CAM filters - * @rp: rhine_private data of this Rhine - * - * Update VLAN CAM filters to match configuration change. - */ -static void rhine_update_vcam(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - u16 vid; - u32 vCAMmask = 0; /* 32 vCAMs (6105M and better) */ - unsigned int i = 0; - - for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) { - rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid); - vCAMmask |= 1 << i; - if (++i >= VCAM_SIZE) - break; - } - rhine_set_vlan_cam_mask(ioaddr, vCAMmask); -} - -static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) -{ - struct rhine_private *rp = netdev_priv(dev); - - spin_lock_irq(&rp->lock); - set_bit(vid, rp->active_vlans); - rhine_update_vcam(dev); - spin_unlock_irq(&rp->lock); -} - -static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) -{ - struct rhine_private *rp = netdev_priv(dev); - - spin_lock_irq(&rp->lock); - clear_bit(vid, rp->active_vlans); - rhine_update_vcam(dev); - spin_unlock_irq(&rp->lock); -} - -static void init_registers(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - int i; - - for (i = 0; i < 6; i++) - iowrite8(dev->dev_addr[i], ioaddr + StationAddr + i); - - /* Initialize other registers. */ - iowrite16(0x0006, ioaddr + PCIBusConfig); /* Tune configuration??? */ - /* Configure initial FIFO thresholds. */ - iowrite8(0x20, ioaddr + TxConfig); - rp->tx_thresh = 0x20; - rp->rx_thresh = 0x60; /* Written in rhine_set_rx_mode(). */ - - iowrite32(rp->rx_ring_dma, ioaddr + RxRingPtr); - iowrite32(rp->tx_ring_dma, ioaddr + TxRingPtr); - - rhine_set_rx_mode(dev); - - if (rp->pdev->revision >= VT6105M) - rhine_init_cam_filter(dev); - - napi_enable(&rp->napi); - - /* Enable interrupts by setting the interrupt mask. */ - iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow | - IntrRxDropped | IntrRxNoBuf | IntrTxAborted | - IntrTxDone | IntrTxError | IntrTxUnderrun | - IntrPCIErr | IntrStatsMax | IntrLinkChange, - ioaddr + IntrEnable); - - iowrite16(CmdStart | CmdTxOn | CmdRxOn | (Cmd1NoTxPoll << 8), - ioaddr + ChipCmd); - rhine_check_media(dev, 1); -} - -/* Enable MII link status auto-polling (required for IntrLinkChange) */ -static void rhine_enable_linkmon(void __iomem *ioaddr) -{ - iowrite8(0, ioaddr + MIICmd); - iowrite8(MII_BMSR, ioaddr + MIIRegAddr); - iowrite8(0x80, ioaddr + MIICmd); - - RHINE_WAIT_FOR((ioread8(ioaddr + MIIRegAddr) & 0x20)); - - iowrite8(MII_BMSR | 0x40, ioaddr + MIIRegAddr); -} - -/* Disable MII link status auto-polling (required for MDIO access) */ -static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks) -{ - iowrite8(0, ioaddr + MIICmd); - - if (quirks & rqRhineI) { - iowrite8(0x01, ioaddr + MIIRegAddr); // MII_BMSR - - /* Can be called from ISR. Evil. */ - mdelay(1); - - /* 0x80 must be set immediately before turning it off */ - iowrite8(0x80, ioaddr + MIICmd); - - RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x20); - - /* Heh. Now clear 0x80 again. */ - iowrite8(0, ioaddr + MIICmd); - } - else - RHINE_WAIT_FOR(ioread8(ioaddr + MIIRegAddr) & 0x80); -} - -/* Read and write over the MII Management Data I/O (MDIO) interface. */ - -static int mdio_read(struct net_device *dev, int phy_id, int regnum) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - int result; - - rhine_disable_linkmon(ioaddr, rp->quirks); - - /* rhine_disable_linkmon already cleared MIICmd */ - iowrite8(phy_id, ioaddr + MIIPhyAddr); - iowrite8(regnum, ioaddr + MIIRegAddr); - iowrite8(0x40, ioaddr + MIICmd); /* Trigger read */ - RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x40)); - result = ioread16(ioaddr + MIIData); - - rhine_enable_linkmon(ioaddr); - return result; -} - -static void mdio_write(struct net_device *dev, int phy_id, int regnum, int value) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - rhine_disable_linkmon(ioaddr, rp->quirks); - - /* rhine_disable_linkmon already cleared MIICmd */ - iowrite8(phy_id, ioaddr + MIIPhyAddr); - iowrite8(regnum, ioaddr + MIIRegAddr); - iowrite16(value, ioaddr + MIIData); - iowrite8(0x20, ioaddr + MIICmd); /* Trigger write */ - RHINE_WAIT_FOR(!(ioread8(ioaddr + MIICmd) & 0x20)); - - rhine_enable_linkmon(ioaddr); -} - -static int rhine_open(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - int rc; - - rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name, - dev); - if (rc) - return rc; - - if (debug > 1) - netdev_dbg(dev, "%s() irq %d\n", __func__, rp->pdev->irq); - - rc = alloc_ring(dev); - if (rc) { - free_irq(rp->pdev->irq, dev); - return rc; - } - alloc_rbufs(dev); - alloc_tbufs(dev); - rhine_chip_reset(dev); - init_registers(dev); - if (debug > 2) - netdev_dbg(dev, "%s() Done - status %04x MII status: %04x\n", - __func__, ioread16(ioaddr + ChipCmd), - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); - - netif_start_queue(dev); - - return 0; -} - -static void rhine_reset_task(struct work_struct *work) -{ - struct rhine_private *rp = container_of(work, struct rhine_private, - reset_task); - struct net_device *dev = rp->dev; - - /* protect against concurrent rx interrupts */ - disable_irq(rp->pdev->irq); - - napi_disable(&rp->napi); - - spin_lock_bh(&rp->lock); - - /* clear all descriptors */ - free_tbufs(dev); - free_rbufs(dev); - alloc_tbufs(dev); - alloc_rbufs(dev); - - /* Reinitialize the hardware. */ - rhine_chip_reset(dev); - init_registers(dev); - - spin_unlock_bh(&rp->lock); - enable_irq(rp->pdev->irq); - - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_errors++; - netif_wake_queue(dev); -} - -static void rhine_tx_timeout(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - netdev_warn(dev, "Transmit timed out, status %04x, PHY status %04x, resetting...\n", - ioread16(ioaddr + IntrStatus), - mdio_read(dev, rp->mii_if.phy_id, MII_BMSR)); - - schedule_work(&rp->reset_task); -} - -static netdev_tx_t rhine_start_tx(struct sk_buff *skb, - struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - unsigned entry; - unsigned long flags; - - /* Caution: the write order is important here, set the field - with the "ownership" bits last. */ - - /* Calculate the next Tx descriptor entry. */ - entry = rp->cur_tx % TX_RING_SIZE; - - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - - rp->tx_skbuff[entry] = skb; - - if ((rp->quirks & rqRhineI) && - (((unsigned long)skb->data & 3) || skb_shinfo(skb)->nr_frags != 0 || skb->ip_summed == CHECKSUM_PARTIAL)) { - /* Must use alignment buffer. */ - if (skb->len > PKT_BUF_SZ) { - /* packet too long, drop it */ - dev_kfree_skb(skb); - rp->tx_skbuff[entry] = NULL; - dev->stats.tx_dropped++; - return NETDEV_TX_OK; - } - - /* Padding is not copied and so must be redone. */ - skb_copy_and_csum_dev(skb, rp->tx_buf[entry]); - if (skb->len < ETH_ZLEN) - memset(rp->tx_buf[entry] + skb->len, 0, - ETH_ZLEN - skb->len); - rp->tx_skbuff_dma[entry] = 0; - rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma + - (rp->tx_buf[entry] - - rp->tx_bufs)); - } else { - rp->tx_skbuff_dma[entry] = - pci_map_single(rp->pdev, skb->data, skb->len, - PCI_DMA_TODEVICE); - rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_skbuff_dma[entry]); - } - - rp->tx_ring[entry].desc_length = - cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); - - if (unlikely(vlan_tx_tag_present(skb))) { - rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16); - /* request tagging */ - rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000); - } - else - rp->tx_ring[entry].tx_status = 0; - - /* lock eth irq */ - spin_lock_irqsave(&rp->lock, flags); - wmb(); - rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn); - wmb(); - - rp->cur_tx++; - - /* Non-x86 Todo: explicitly flush cache lines here. */ - - if (vlan_tx_tag_present(skb)) - /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ - BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); - - /* Wake the potentially-idle transmit channel */ - iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, - ioaddr + ChipCmd1); - IOSYNC; - - if (rp->cur_tx == rp->dirty_tx + TX_QUEUE_LEN) - netif_stop_queue(dev); - - spin_unlock_irqrestore(&rp->lock, flags); - - if (debug > 4) { - netdev_dbg(dev, "Transmit frame #%d queued in slot %d\n", - rp->cur_tx-1, entry); - } - return NETDEV_TX_OK; -} - -/* The interrupt handler does all of the Rx thread work and cleans up - after the Tx thread. */ -static irqreturn_t rhine_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - u32 intr_status; - int boguscnt = max_interrupt_work; - int handled = 0; - - while ((intr_status = get_intr_status(dev))) { - handled = 1; - - /* Acknowledge all of the current interrupt sources ASAP. */ - if (intr_status & IntrTxDescRace) - iowrite8(0x08, ioaddr + IntrStatus2); - iowrite16(intr_status & 0xffff, ioaddr + IntrStatus); - IOSYNC; - - if (debug > 4) - netdev_dbg(dev, "Interrupt, status %08x\n", - intr_status); - - if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped | - IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) { - iowrite16(IntrTxAborted | - IntrTxDone | IntrTxError | IntrTxUnderrun | - IntrPCIErr | IntrStatsMax | IntrLinkChange, - ioaddr + IntrEnable); - - napi_schedule(&rp->napi); - } - - if (intr_status & (IntrTxErrSummary | IntrTxDone)) { - if (intr_status & IntrTxErrSummary) { - /* Avoid scavenging before Tx engine turned off */ - RHINE_WAIT_FOR(!(ioread8(ioaddr+ChipCmd) & CmdTxOn)); - if (debug > 2 && - ioread8(ioaddr+ChipCmd) & CmdTxOn) - netdev_warn(dev, - "%s: Tx engine still on\n", - __func__); - } - rhine_tx(dev); - } - - /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (IntrPCIErr | IntrLinkChange | - IntrStatsMax | IntrTxError | IntrTxAborted | - IntrTxUnderrun | IntrTxDescRace)) - rhine_error(dev, intr_status); - - if (--boguscnt < 0) { - netdev_warn(dev, "Too much work at interrupt, status=%#08x\n", - intr_status); - break; - } - } - - if (debug > 3) - netdev_dbg(dev, "exiting interrupt, status=%08x\n", - ioread16(ioaddr + IntrStatus)); - return IRQ_RETVAL(handled); -} - -/* This routine is logically part of the interrupt handler, but isolated - for clarity. */ -static void rhine_tx(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE; - - spin_lock(&rp->lock); - - /* find and cleanup dirty tx descriptors */ - while (rp->dirty_tx != rp->cur_tx) { - txstatus = le32_to_cpu(rp->tx_ring[entry].tx_status); - if (debug > 6) - netdev_dbg(dev, "Tx scavenge %d status %08x\n", - entry, txstatus); - if (txstatus & DescOwn) - break; - if (txstatus & 0x8000) { - if (debug > 1) - netdev_dbg(dev, "Transmit error, Tx status %08x\n", - txstatus); - dev->stats.tx_errors++; - if (txstatus & 0x0400) - dev->stats.tx_carrier_errors++; - if (txstatus & 0x0200) - dev->stats.tx_window_errors++; - if (txstatus & 0x0100) - dev->stats.tx_aborted_errors++; - if (txstatus & 0x0080) - dev->stats.tx_heartbeat_errors++; - if (((rp->quirks & rqRhineI) && txstatus & 0x0002) || - (txstatus & 0x0800) || (txstatus & 0x1000)) { - dev->stats.tx_fifo_errors++; - rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); - break; /* Keep the skb - we try again */ - } - /* Transmitter restarted in 'abnormal' handler. */ - } else { - if (rp->quirks & rqRhineI) - dev->stats.collisions += (txstatus >> 3) & 0x0F; - else - dev->stats.collisions += txstatus & 0x0F; - if (debug > 6) - netdev_dbg(dev, "collisions: %1.1x:%1.1x\n", - (txstatus >> 3) & 0xF, - txstatus & 0xF); - dev->stats.tx_bytes += rp->tx_skbuff[entry]->len; - dev->stats.tx_packets++; - } - /* Free the original skb. */ - if (rp->tx_skbuff_dma[entry]) { - pci_unmap_single(rp->pdev, - rp->tx_skbuff_dma[entry], - rp->tx_skbuff[entry]->len, - PCI_DMA_TODEVICE); - } - dev_kfree_skb_irq(rp->tx_skbuff[entry]); - rp->tx_skbuff[entry] = NULL; - entry = (++rp->dirty_tx) % TX_RING_SIZE; - } - if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4) - netif_wake_queue(dev); - - spin_unlock(&rp->lock); -} - -/** - * rhine_get_vlan_tci - extract TCI from Rx data buffer - * @skb: pointer to sk_buff - * @data_size: used data area of the buffer including CRC - * - * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q - * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte - * aligned following the CRC. - */ -static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size) -{ - u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2; - return be16_to_cpup((__be16 *)trailer); -} - -/* Process up to limit frames from receive ring */ -static int rhine_rx(struct net_device *dev, int limit) -{ - struct rhine_private *rp = netdev_priv(dev); - int count; - int entry = rp->cur_rx % RX_RING_SIZE; - - if (debug > 4) { - netdev_dbg(dev, "%s(), entry %d status %08x\n", - __func__, entry, - le32_to_cpu(rp->rx_head_desc->rx_status)); - } - - /* If EOP is set on the next entry, it's a new packet. Send it up. */ - for (count = 0; count < limit; ++count) { - struct rx_desc *desc = rp->rx_head_desc; - u32 desc_status = le32_to_cpu(desc->rx_status); - u32 desc_length = le32_to_cpu(desc->desc_length); - int data_size = desc_status >> 16; - - if (desc_status & DescOwn) - break; - - if (debug > 4) - netdev_dbg(dev, "%s() status is %08x\n", - __func__, desc_status); - - if ((desc_status & (RxWholePkt | RxErr)) != RxWholePkt) { - if ((desc_status & RxWholePkt) != RxWholePkt) { - netdev_warn(dev, - "Oversized Ethernet frame spanned multiple buffers, " - "entry %#x length %d status %08x!\n", - entry, data_size, - desc_status); - netdev_warn(dev, - "Oversized Ethernet frame %p vs %p\n", - rp->rx_head_desc, - &rp->rx_ring[entry]); - dev->stats.rx_length_errors++; - } else if (desc_status & RxErr) { - /* There was a error. */ - if (debug > 2) - netdev_dbg(dev, "%s() Rx error was %08x\n", - __func__, desc_status); - dev->stats.rx_errors++; - if (desc_status & 0x0030) - dev->stats.rx_length_errors++; - if (desc_status & 0x0048) - dev->stats.rx_fifo_errors++; - if (desc_status & 0x0004) - dev->stats.rx_frame_errors++; - if (desc_status & 0x0002) { - /* this can also be updated outside the interrupt handler */ - spin_lock(&rp->lock); - dev->stats.rx_crc_errors++; - spin_unlock(&rp->lock); - } - } - } else { - struct sk_buff *skb = NULL; - /* Length should omit the CRC */ - int pkt_len = data_size - 4; - u16 vlan_tci = 0; - - /* Check if the packet is long enough to accept without - copying to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak) - skb = netdev_alloc_skb_ip_align(dev, pkt_len); - if (skb) { - pci_dma_sync_single_for_cpu(rp->pdev, - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - - skb_copy_to_linear_data(skb, - rp->rx_skbuff[entry]->data, - pkt_len); - skb_put(skb, pkt_len); - pci_dma_sync_single_for_device(rp->pdev, - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - } else { - skb = rp->rx_skbuff[entry]; - if (skb == NULL) { - netdev_err(dev, "Inconsistent Rx descriptor chain\n"); - break; - } - rp->rx_skbuff[entry] = NULL; - skb_put(skb, pkt_len); - pci_unmap_single(rp->pdev, - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - } - - if (unlikely(desc_length & DescTag)) - vlan_tci = rhine_get_vlan_tci(skb, data_size); - - skb->protocol = eth_type_trans(skb, dev); - - if (unlikely(desc_length & DescTag)) - __vlan_hwaccel_put_tag(skb, vlan_tci); - netif_receive_skb(skb); - dev->stats.rx_bytes += pkt_len; - dev->stats.rx_packets++; - } - entry = (++rp->cur_rx) % RX_RING_SIZE; - rp->rx_head_desc = &rp->rx_ring[entry]; - } - - /* Refill the Rx ring buffers. */ - for (; rp->cur_rx - rp->dirty_rx > 0; rp->dirty_rx++) { - struct sk_buff *skb; - entry = rp->dirty_rx % RX_RING_SIZE; - if (rp->rx_skbuff[entry] == NULL) { - skb = netdev_alloc_skb(dev, rp->rx_buf_sz); - rp->rx_skbuff[entry] = skb; - if (skb == NULL) - break; /* Better luck next round. */ - skb->dev = dev; /* Mark as being used by this device. */ - rp->rx_skbuff_dma[entry] = - pci_map_single(rp->pdev, skb->data, - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); - rp->rx_ring[entry].addr = cpu_to_le32(rp->rx_skbuff_dma[entry]); - } - rp->rx_ring[entry].rx_status = cpu_to_le32(DescOwn); - } - - return count; -} - -/* - * Clears the "tally counters" for CRC errors and missed frames(?). - * It has been reported that some chips need a write of 0 to clear - * these, for others the counters are set to 1 when written to and - * instead cleared when read. So we clear them both ways ... - */ -static inline void clear_tally_counters(void __iomem *ioaddr) -{ - iowrite32(0, ioaddr + RxMissed); - ioread16(ioaddr + RxCRCErrs); - ioread16(ioaddr + RxMissed); -} - -static void rhine_restart_tx(struct net_device *dev) { - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - int entry = rp->dirty_tx % TX_RING_SIZE; - u32 intr_status; - - /* - * If new errors occurred, we need to sort them out before doing Tx. - * In that case the ISR will be back here RSN anyway. - */ - intr_status = get_intr_status(dev); - - if ((intr_status & IntrTxErrSummary) == 0) { - - /* We know better than the chip where it should continue. */ - iowrite32(rp->tx_ring_dma + entry * sizeof(struct tx_desc), - ioaddr + TxRingPtr); - - iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn, - ioaddr + ChipCmd); - - if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000)) - /* Tx queues are bits 7-0 (first Tx queue: bit 7) */ - BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake); - - iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand, - ioaddr + ChipCmd1); - IOSYNC; - } - else { - /* This should never happen */ - if (debug > 1) - netdev_warn(dev, "%s() Another error occurred %08x\n", - __func__, intr_status); - } - -} - -static void rhine_error(struct net_device *dev, int intr_status) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - spin_lock(&rp->lock); - - if (intr_status & IntrLinkChange) - rhine_check_media(dev, 0); - if (intr_status & IntrStatsMax) { - dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); - dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); - clear_tally_counters(ioaddr); - } - if (intr_status & IntrTxAborted) { - if (debug > 1) - netdev_info(dev, "Abort %08x, frame dropped\n", - intr_status); - } - if (intr_status & IntrTxUnderrun) { - if (rp->tx_thresh < 0xE0) - BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); - if (debug > 1) - netdev_info(dev, "Transmitter underrun, Tx threshold now %02x\n", - rp->tx_thresh); - } - if (intr_status & IntrTxDescRace) { - if (debug > 2) - netdev_info(dev, "Tx descriptor write-back race\n"); - } - if ((intr_status & IntrTxError) && - (intr_status & (IntrTxAborted | - IntrTxUnderrun | IntrTxDescRace)) == 0) { - if (rp->tx_thresh < 0xE0) { - BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig); - } - if (debug > 1) - netdev_info(dev, "Unspecified error. Tx threshold now %02x\n", - rp->tx_thresh); - } - if (intr_status & (IntrTxAborted | IntrTxUnderrun | IntrTxDescRace | - IntrTxError)) - rhine_restart_tx(dev); - - if (intr_status & ~(IntrLinkChange | IntrStatsMax | IntrTxUnderrun | - IntrTxError | IntrTxAborted | IntrNormalSummary | - IntrTxDescRace)) { - if (debug > 1) - netdev_err(dev, "Something Wicked happened! %08x\n", - intr_status); - } - - spin_unlock(&rp->lock); -} - -static struct net_device_stats *rhine_get_stats(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - unsigned long flags; - - spin_lock_irqsave(&rp->lock, flags); - dev->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs); - dev->stats.rx_missed_errors += ioread16(ioaddr + RxMissed); - clear_tally_counters(ioaddr); - spin_unlock_irqrestore(&rp->lock, flags); - - return &dev->stats; -} - -static void rhine_set_rx_mode(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - u32 mc_filter[2]; /* Multicast hash filter */ - u8 rx_mode = 0x0C; /* Note: 0x02=accept runt, 0x01=accept errs */ - struct netdev_hw_addr *ha; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - rx_mode = 0x1C; - iowrite32(0xffffffff, ioaddr + MulticastFilter0); - iowrite32(0xffffffff, ioaddr + MulticastFilter1); - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to match, or accept all multicasts. */ - iowrite32(0xffffffff, ioaddr + MulticastFilter0); - iowrite32(0xffffffff, ioaddr + MulticastFilter1); - } else if (rp->pdev->revision >= VT6105M) { - int i = 0; - u32 mCAMmask = 0; /* 32 mCAMs (6105M and better) */ - netdev_for_each_mc_addr(ha, dev) { - if (i == MCAM_SIZE) - break; - rhine_set_cam(ioaddr, i, ha->addr); - mCAMmask |= 1 << i; - i++; - } - rhine_set_cam_mask(ioaddr, mCAMmask); - } else { - memset(mc_filter, 0, sizeof(mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; - - mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); - } - iowrite32(mc_filter[0], ioaddr + MulticastFilter0); - iowrite32(mc_filter[1], ioaddr + MulticastFilter1); - } - /* enable/disable VLAN receive filtering */ - if (rp->pdev->revision >= VT6105M) { - if (dev->flags & IFF_PROMISC) - BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1); - else - BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1); - } - BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig); -} - -static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct rhine_private *rp = netdev_priv(dev); - - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(rp->pdev)); -} - -static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct rhine_private *rp = netdev_priv(dev); - int rc; - - spin_lock_irq(&rp->lock); - rc = mii_ethtool_gset(&rp->mii_if, cmd); - spin_unlock_irq(&rp->lock); - - return rc; -} - -static int netdev_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct rhine_private *rp = netdev_priv(dev); - int rc; - - spin_lock_irq(&rp->lock); - rc = mii_ethtool_sset(&rp->mii_if, cmd); - spin_unlock_irq(&rp->lock); - rhine_set_carrier(&rp->mii_if); - - return rc; -} - -static int netdev_nway_reset(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - - return mii_nway_restart(&rp->mii_if); -} - -static u32 netdev_get_link(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - - return mii_link_ok(&rp->mii_if); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 value) -{ - debug = value; -} - -static void rhine_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct rhine_private *rp = netdev_priv(dev); - - if (!(rp->quirks & rqWOL)) - return; - - spin_lock_irq(&rp->lock); - wol->supported = WAKE_PHY | WAKE_MAGIC | - WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */ - wol->wolopts = rp->wolopts; - spin_unlock_irq(&rp->lock); -} - -static int rhine_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct rhine_private *rp = netdev_priv(dev); - u32 support = WAKE_PHY | WAKE_MAGIC | - WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; /* Untested */ - - if (!(rp->quirks & rqWOL)) - return -EINVAL; - - if (wol->wolopts & ~support) - return -EINVAL; - - spin_lock_irq(&rp->lock); - rp->wolopts = wol->wolopts; - spin_unlock_irq(&rp->lock); - - return 0; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_settings = netdev_get_settings, - .set_settings = netdev_set_settings, - .nway_reset = netdev_nway_reset, - .get_link = netdev_get_link, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, - .get_wol = rhine_get_wol, - .set_wol = rhine_set_wol, -}; - -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct rhine_private *rp = netdev_priv(dev); - int rc; - - if (!netif_running(dev)) - return -EINVAL; - - spin_lock_irq(&rp->lock); - rc = generic_mii_ioctl(&rp->mii_if, if_mii(rq), cmd, NULL); - spin_unlock_irq(&rp->lock); - rhine_set_carrier(&rp->mii_if); - - return rc; -} - -static int rhine_close(struct net_device *dev) -{ - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - napi_disable(&rp->napi); - cancel_work_sync(&rp->reset_task); - netif_stop_queue(dev); - - spin_lock_irq(&rp->lock); - - if (debug > 1) - netdev_dbg(dev, "Shutting down ethercard, status was %04x\n", - ioread16(ioaddr + ChipCmd)); - - /* Switch to loopback mode to avoid hardware races. */ - iowrite8(rp->tx_thresh | 0x02, ioaddr + TxConfig); - - /* Disable interrupts by clearing the interrupt mask. */ - iowrite16(0x0000, ioaddr + IntrEnable); - - /* Stop the chip's Tx and Rx processes. */ - iowrite16(CmdStop, ioaddr + ChipCmd); - - spin_unlock_irq(&rp->lock); - - free_irq(rp->pdev->irq, dev); - free_rbufs(dev); - free_tbufs(dev); - free_ring(dev); - - return 0; -} - - -static void __devexit rhine_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct rhine_private *rp = netdev_priv(dev); - - unregister_netdev(dev); - - pci_iounmap(pdev, rp->base); - pci_release_regions(pdev); - - free_netdev(dev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); -} - -static void rhine_shutdown (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct rhine_private *rp = netdev_priv(dev); - void __iomem *ioaddr = rp->base; - - if (!(rp->quirks & rqWOL)) - return; /* Nothing to do for non-WOL adapters */ - - rhine_power_init(dev); - - /* Make sure we use pattern 0, 1 and not 4, 5 */ - if (rp->quirks & rq6patterns) - iowrite8(0x04, ioaddr + WOLcgClr); - - if (rp->wolopts & WAKE_MAGIC) { - iowrite8(WOLmagic, ioaddr + WOLcrSet); - /* - * Turn EEPROM-controlled wake-up back on -- some hardware may - * not cooperate otherwise. - */ - iowrite8(ioread8(ioaddr + ConfigA) | 0x03, ioaddr + ConfigA); - } - - if (rp->wolopts & (WAKE_BCAST|WAKE_MCAST)) - iowrite8(WOLbmcast, ioaddr + WOLcgSet); - - if (rp->wolopts & WAKE_PHY) - iowrite8(WOLlnkon | WOLlnkoff, ioaddr + WOLcrSet); - - if (rp->wolopts & WAKE_UCAST) - iowrite8(WOLucast, ioaddr + WOLcrSet); - - if (rp->wolopts) { - /* Enable legacy WOL (for old motherboards) */ - iowrite8(0x01, ioaddr + PwcfgSet); - iowrite8(ioread8(ioaddr + StickyHW) | 0x04, ioaddr + StickyHW); - } - - /* Hit power state D3 (sleep) */ - if (!avoid_D3) - iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW); - - /* TODO: Check use of pci_enable_wake() */ - -} - -#ifdef CONFIG_PM -static int rhine_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct rhine_private *rp = netdev_priv(dev); - unsigned long flags; - - if (!netif_running(dev)) - return 0; - - napi_disable(&rp->napi); - - netif_device_detach(dev); - pci_save_state(pdev); - - spin_lock_irqsave(&rp->lock, flags); - rhine_shutdown(pdev); - spin_unlock_irqrestore(&rp->lock, flags); - - free_irq(dev->irq, dev); - return 0; -} - -static int rhine_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct rhine_private *rp = netdev_priv(dev); - unsigned long flags; - int ret; - - if (!netif_running(dev)) - return 0; - - if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev)) - netdev_err(dev, "request_irq failed\n"); - - ret = pci_set_power_state(pdev, PCI_D0); - if (debug > 1) - netdev_info(dev, "Entering power state D0 %s (%d)\n", - ret ? "failed" : "succeeded", ret); - - pci_restore_state(pdev); - - spin_lock_irqsave(&rp->lock, flags); -#ifdef USE_MMIO - enable_mmio(rp->pioaddr, rp->quirks); -#endif - rhine_power_init(dev); - free_tbufs(dev); - free_rbufs(dev); - alloc_tbufs(dev); - alloc_rbufs(dev); - init_registers(dev); - spin_unlock_irqrestore(&rp->lock, flags); - - netif_device_attach(dev); - - return 0; -} -#endif /* CONFIG_PM */ - -static struct pci_driver rhine_driver = { - .name = DRV_NAME, - .id_table = rhine_pci_tbl, - .probe = rhine_init_one, - .remove = __devexit_p(rhine_remove_one), -#ifdef CONFIG_PM - .suspend = rhine_suspend, - .resume = rhine_resume, -#endif /* CONFIG_PM */ - .shutdown = rhine_shutdown, -}; - -static struct dmi_system_id __initdata rhine_dmi_table[] = { - { - .ident = "EPIA-M", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "Award Software International, Inc."), - DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), - }, - }, - { - .ident = "KV7", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), - DMI_MATCH(DMI_BIOS_VERSION, "6.00 PG"), - }, - }, - { NULL } -}; - -static int __init rhine_init(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - pr_info("%s\n", version); -#endif - if (dmi_check_system(rhine_dmi_table)) { - /* these BIOSes fail at PXE boot if chip is in D3 */ - avoid_D3 = 1; - pr_warn("Broken BIOS detected, avoid_D3 enabled\n"); - } - else if (avoid_D3) - pr_info("avoid_D3 set\n"); - - return pci_register_driver(&rhine_driver); -} - - -static void __exit rhine_cleanup(void) -{ - pci_unregister_driver(&rhine_driver); -} - - -module_init(rhine_init); -module_exit(rhine_cleanup); diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c deleted file mode 100644 index 490ec5b2775a..000000000000 --- a/drivers/net/via-velocity.c +++ /dev/null @@ -1,3592 +0,0 @@ -/* - * This code is derived from the VIA reference driver (copyright message - * below) provided to Red Hat by VIA Networking Technologies, Inc. for - * addition to the Linux kernel. - * - * The code has been merged into one source file, cleaned up to follow - * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned - * for 64bit hardware platforms. - * - * TODO - * rx_copybreak/alignment - * More testing - * - * The changes are (c) Copyright 2004, Red Hat Inc. - * Additional fixes and clean up: Francois Romieu - * - * This source has not been verified for use in safety critical systems. - * - * Please direct queries about the revamped driver to the linux-kernel - * list not VIA. - * - * Original code: - * - * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. - * All rights reserved. - * - * This software may be redistributed and/or modified under - * the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or - * any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * Author: Chuang Liang-Shing, AJ Jiang - * - * Date: Jan 24, 2003 - * - * MODULE_LICENSE("GPL"); - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "via-velocity.h" - - -static int velocity_nics; -static int msglevel = MSG_LEVEL_INFO; - -/** - * mac_get_cam_mask - Read a CAM mask - * @regs: register block for this velocity - * @mask: buffer to store mask - * - * Fetch the mask bits of the selected CAM and store them into the - * provided mask buffer. - */ -static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask) -{ - int i; - - /* Select CAM mask */ - BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); - - writeb(0, ®s->CAMADDR); - - /* read mask */ - for (i = 0; i < 8; i++) - *mask++ = readb(&(regs->MARCAM[i])); - - /* disable CAMEN */ - writeb(0, ®s->CAMADDR); - - /* Select mar */ - BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); -} - -/** - * mac_set_cam_mask - Set a CAM mask - * @regs: register block for this velocity - * @mask: CAM mask to load - * - * Store a new mask into a CAM - */ -static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask) -{ - int i; - /* Select CAM mask */ - BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); - - writeb(CAMADDR_CAMEN, ®s->CAMADDR); - - for (i = 0; i < 8; i++) - writeb(*mask++, &(regs->MARCAM[i])); - - /* disable CAMEN */ - writeb(0, ®s->CAMADDR); - - /* Select mar */ - BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); -} - -static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask) -{ - int i; - /* Select CAM mask */ - BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); - - writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, ®s->CAMADDR); - - for (i = 0; i < 8; i++) - writeb(*mask++, &(regs->MARCAM[i])); - - /* disable CAMEN */ - writeb(0, ®s->CAMADDR); - - /* Select mar */ - BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); -} - -/** - * mac_set_cam - set CAM data - * @regs: register block of this velocity - * @idx: Cam index - * @addr: 2 or 6 bytes of CAM data - * - * Load an address or vlan tag into a CAM - */ -static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr) -{ - int i; - - /* Select CAM mask */ - BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); - - idx &= (64 - 1); - - writeb(CAMADDR_CAMEN | idx, ®s->CAMADDR); - - for (i = 0; i < 6; i++) - writeb(*addr++, &(regs->MARCAM[i])); - - BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR); - - udelay(10); - - writeb(0, ®s->CAMADDR); - - /* Select mar */ - BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); -} - -static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx, - const u8 *addr) -{ - - /* Select CAM mask */ - BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); - - idx &= (64 - 1); - - writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, ®s->CAMADDR); - writew(*((u16 *) addr), ®s->MARCAM[0]); - - BYTE_REG_BITS_ON(CAMCR_CAMWR, ®s->CAMCR); - - udelay(10); - - writeb(0, ®s->CAMADDR); - - /* Select mar */ - BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, ®s->CAMCR); -} - - -/** - * mac_wol_reset - reset WOL after exiting low power - * @regs: register block of this velocity - * - * Called after we drop out of wake on lan mode in order to - * reset the Wake on lan features. This function doesn't restore - * the rest of the logic from the result of sleep/wakeup - */ -static void mac_wol_reset(struct mac_regs __iomem *regs) -{ - - /* Turn off SWPTAG right after leaving power mode */ - BYTE_REG_BITS_OFF(STICKHW_SWPTAG, ®s->STICKHW); - /* clear sticky bits */ - BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW); - - BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, ®s->CHIPGCR); - BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR); - /* disable force PME-enable */ - writeb(WOLCFG_PMEOVR, ®s->WOLCFGClr); - /* disable power-event config bit */ - writew(0xFFFF, ®s->WOLCRClr); - /* clear power status */ - writew(0xFFFF, ®s->WOLSRClr); -} - -static const struct ethtool_ops velocity_ethtool_ops; - -/* - Define module options -*/ - -MODULE_AUTHOR("VIA Networking Technologies, Inc."); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"); - -#define VELOCITY_PARAM(N, D) \ - static int N[MAX_UNITS] = OPTION_DEFAULT;\ - module_param_array(N, int, NULL, 0); \ - MODULE_PARM_DESC(N, D); - -#define RX_DESC_MIN 64 -#define RX_DESC_MAX 255 -#define RX_DESC_DEF 64 -VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors"); - -#define TX_DESC_MIN 16 -#define TX_DESC_MAX 256 -#define TX_DESC_DEF 64 -VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors"); - -#define RX_THRESH_MIN 0 -#define RX_THRESH_MAX 3 -#define RX_THRESH_DEF 0 -/* rx_thresh[] is used for controlling the receive fifo threshold. - 0: indicate the rxfifo threshold is 128 bytes. - 1: indicate the rxfifo threshold is 512 bytes. - 2: indicate the rxfifo threshold is 1024 bytes. - 3: indicate the rxfifo threshold is store & forward. -*/ -VELOCITY_PARAM(rx_thresh, "Receive fifo threshold"); - -#define DMA_LENGTH_MIN 0 -#define DMA_LENGTH_MAX 7 -#define DMA_LENGTH_DEF 6 - -/* DMA_length[] is used for controlling the DMA length - 0: 8 DWORDs - 1: 16 DWORDs - 2: 32 DWORDs - 3: 64 DWORDs - 4: 128 DWORDs - 5: 256 DWORDs - 6: SF(flush till emply) - 7: SF(flush till emply) -*/ -VELOCITY_PARAM(DMA_length, "DMA length"); - -#define IP_ALIG_DEF 0 -/* IP_byte_align[] is used for IP header DWORD byte aligned - 0: indicate the IP header won't be DWORD byte aligned.(Default) . - 1: indicate the IP header will be DWORD byte aligned. - In some environment, the IP header should be DWORD byte aligned, - or the packet will be droped when we receive it. (eg: IPVS) -*/ -VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned"); - -#define FLOW_CNTL_DEF 1 -#define FLOW_CNTL_MIN 1 -#define FLOW_CNTL_MAX 5 - -/* flow_control[] is used for setting the flow control ability of NIC. - 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR. - 2: enable TX flow control. - 3: enable RX flow control. - 4: enable RX/TX flow control. - 5: disable -*/ -VELOCITY_PARAM(flow_control, "Enable flow control ability"); - -#define MED_LNK_DEF 0 -#define MED_LNK_MIN 0 -#define MED_LNK_MAX 5 -/* speed_duplex[] is used for setting the speed and duplex mode of NIC. - 0: indicate autonegotiation for both speed and duplex mode - 1: indicate 100Mbps half duplex mode - 2: indicate 100Mbps full duplex mode - 3: indicate 10Mbps half duplex mode - 4: indicate 10Mbps full duplex mode - 5: indicate 1000Mbps full duplex mode - - Note: - if EEPROM have been set to the force mode, this option is ignored - by driver. -*/ -VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode"); - -#define VAL_PKT_LEN_DEF 0 -/* ValPktLen[] is used for setting the checksum offload ability of NIC. - 0: Receive frame with invalid layer 2 length (Default) - 1: Drop frame with invalid layer 2 length -*/ -VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame"); - -#define WOL_OPT_DEF 0 -#define WOL_OPT_MIN 0 -#define WOL_OPT_MAX 7 -/* wol_opts[] is used for controlling wake on lan behavior. - 0: Wake up if recevied a magic packet. (Default) - 1: Wake up if link status is on/off. - 2: Wake up if recevied an arp packet. - 4: Wake up if recevied any unicast packet. - Those value can be sumed up to support more than one option. -*/ -VELOCITY_PARAM(wol_opts, "Wake On Lan options"); - -static int rx_copybreak = 200; -module_param(rx_copybreak, int, 0644); -MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); - -/* - * Internal board variants. At the moment we have only one - */ -static struct velocity_info_tbl chip_info_table[] = { - {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL}, - { } -}; - -/* - * Describe the PCI device identifiers that we support in this - * device driver. Used for hotplug autoloading. - */ -static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) }, - { } -}; - -MODULE_DEVICE_TABLE(pci, velocity_id_table); - -/** - * get_chip_name - identifier to name - * @id: chip identifier - * - * Given a chip identifier return a suitable description. Returns - * a pointer a static string valid while the driver is loaded. - */ -static const char __devinit *get_chip_name(enum chip_type chip_id) -{ - int i; - for (i = 0; chip_info_table[i].name != NULL; i++) - if (chip_info_table[i].chip_id == chip_id) - break; - return chip_info_table[i].name; -} - -/** - * velocity_remove1 - device unplug - * @pdev: PCI device being removed - * - * Device unload callback. Called on an unplug or on module - * unload for each active device that is present. Disconnects - * the device from the network layer and frees all the resources - */ -static void __devexit velocity_remove1(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct velocity_info *vptr = netdev_priv(dev); - - unregister_netdev(dev); - iounmap(vptr->mac_regs); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - free_netdev(dev); - - velocity_nics--; -} - -/** - * velocity_set_int_opt - parser for integer options - * @opt: pointer to option value - * @val: value the user requested (or -1 for default) - * @min: lowest value allowed - * @max: highest value allowed - * @def: default value - * @name: property name - * @dev: device name - * - * Set an integer property in the module options. This function does - * all the verification and checking as well as reporting so that - * we don't duplicate code for each option. - */ -static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, const char *devname) -{ - if (val == -1) - *opt = def; - else if (val < min || val > max) { - VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n", - devname, name, min, max); - *opt = def; - } else { - VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n", - devname, name, val); - *opt = val; - } -} - -/** - * velocity_set_bool_opt - parser for boolean options - * @opt: pointer to option value - * @val: value the user requested (or -1 for default) - * @def: default value (yes/no) - * @flag: numeric value to set for true. - * @name: property name - * @dev: device name - * - * Set a boolean property in the module options. This function does - * all the verification and checking as well as reporting so that - * we don't duplicate code for each option. - */ -static void __devinit velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag, char *name, const char *devname) -{ - (*opt) &= (~flag); - if (val == -1) - *opt |= (def ? flag : 0); - else if (val < 0 || val > 1) { - printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n", - devname, name); - *opt |= (def ? flag : 0); - } else { - printk(KERN_INFO "%s: set parameter %s to %s\n", - devname, name, val ? "TRUE" : "FALSE"); - *opt |= (val ? flag : 0); - } -} - -/** - * velocity_get_options - set options on device - * @opts: option structure for the device - * @index: index of option to use in module options array - * @devname: device name - * - * Turn the module and command options into a single structure - * for the current device - */ -static void __devinit velocity_get_options(struct velocity_opt *opts, int index, const char *devname) -{ - - velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname); - velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname); - velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname); - velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname); - - velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname); - velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname); - velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname); - velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname); - velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname); - opts->numrx = (opts->numrx & ~3); -} - -/** - * velocity_init_cam_filter - initialise CAM - * @vptr: velocity to program - * - * Initialize the content addressable memory used for filters. Load - * appropriately according to the presence of VLAN - */ -static void velocity_init_cam_filter(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - unsigned int vid, i = 0; - - /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */ - WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG); - WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG); - - /* Disable all CAMs */ - memset(vptr->vCAMmask, 0, sizeof(u8) * 8); - memset(vptr->mCAMmask, 0, sizeof(u8) * 8); - mac_set_vlan_cam_mask(regs, vptr->vCAMmask); - mac_set_cam_mask(regs, vptr->mCAMmask); - - /* Enable VCAMs */ - - if (test_bit(0, vptr->active_vlans)) - WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG); - - for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) { - mac_set_vlan_cam(regs, i, (u8 *) &vid); - vptr->vCAMmask[i / 8] |= 0x1 << (i % 8); - if (++i >= VCAM_SIZE) - break; - } - mac_set_vlan_cam_mask(regs, vptr->vCAMmask); -} - -static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) -{ - struct velocity_info *vptr = netdev_priv(dev); - - spin_lock_irq(&vptr->lock); - set_bit(vid, vptr->active_vlans); - velocity_init_cam_filter(vptr); - spin_unlock_irq(&vptr->lock); -} - -static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) -{ - struct velocity_info *vptr = netdev_priv(dev); - - spin_lock_irq(&vptr->lock); - clear_bit(vid, vptr->active_vlans); - velocity_init_cam_filter(vptr); - spin_unlock_irq(&vptr->lock); -} - -static void velocity_init_rx_ring_indexes(struct velocity_info *vptr) -{ - vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0; -} - -/** - * velocity_rx_reset - handle a receive reset - * @vptr: velocity we are resetting - * - * Reset the ownership and status for the receive ring side. - * Hand all the receive queue to the NIC. - */ -static void velocity_rx_reset(struct velocity_info *vptr) -{ - - struct mac_regs __iomem *regs = vptr->mac_regs; - int i; - - velocity_init_rx_ring_indexes(vptr); - - /* - * Init state, all RD entries belong to the NIC - */ - for (i = 0; i < vptr->options.numrx; ++i) - vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC; - - writew(vptr->options.numrx, ®s->RBRDU); - writel(vptr->rx.pool_dma, ®s->RDBaseLo); - writew(0, ®s->RDIdx); - writew(vptr->options.numrx - 1, ®s->RDCSize); -} - -/** - * velocity_get_opt_media_mode - get media selection - * @vptr: velocity adapter - * - * Get the media mode stored in EEPROM or module options and load - * mii_status accordingly. The requested link state information - * is also returned. - */ -static u32 velocity_get_opt_media_mode(struct velocity_info *vptr) -{ - u32 status = 0; - - switch (vptr->options.spd_dpx) { - case SPD_DPX_AUTO: - status = VELOCITY_AUTONEG_ENABLE; - break; - case SPD_DPX_100_FULL: - status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL; - break; - case SPD_DPX_10_FULL: - status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL; - break; - case SPD_DPX_100_HALF: - status = VELOCITY_SPEED_100; - break; - case SPD_DPX_10_HALF: - status = VELOCITY_SPEED_10; - break; - case SPD_DPX_1000_FULL: - status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL; - break; - } - vptr->mii_status = status; - return status; -} - -/** - * safe_disable_mii_autopoll - autopoll off - * @regs: velocity registers - * - * Turn off the autopoll and wait for it to disable on the chip - */ -static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs) -{ - u16 ww; - - /* turn off MAUTO */ - writeb(0, ®s->MIICR); - for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { - udelay(1); - if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) - break; - } -} - -/** - * enable_mii_autopoll - turn on autopolling - * @regs: velocity registers - * - * Enable the MII link status autopoll feature on the Velocity - * hardware. Wait for it to enable. - */ -static void enable_mii_autopoll(struct mac_regs __iomem *regs) -{ - int ii; - - writeb(0, &(regs->MIICR)); - writeb(MIIADR_SWMPL, ®s->MIIADR); - - for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { - udelay(1); - if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) - break; - } - - writeb(MIICR_MAUTO, ®s->MIICR); - - for (ii = 0; ii < W_MAX_TIMEOUT; ii++) { - udelay(1); - if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR)) - break; - } - -} - -/** - * velocity_mii_read - read MII data - * @regs: velocity registers - * @index: MII register index - * @data: buffer for received data - * - * Perform a single read of an MII 16bit register. Returns zero - * on success or -ETIMEDOUT if the PHY did not respond. - */ -static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data) -{ - u16 ww; - - /* - * Disable MIICR_MAUTO, so that mii addr can be set normally - */ - safe_disable_mii_autopoll(regs); - - writeb(index, ®s->MIIADR); - - BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR); - - for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { - if (!(readb(®s->MIICR) & MIICR_RCMD)) - break; - } - - *data = readw(®s->MIIDATA); - - enable_mii_autopoll(regs); - if (ww == W_MAX_TIMEOUT) - return -ETIMEDOUT; - return 0; -} - -/** - * mii_check_media_mode - check media state - * @regs: velocity registers - * - * Check the current MII status and determine the link status - * accordingly - */ -static u32 mii_check_media_mode(struct mac_regs __iomem *regs) -{ - u32 status = 0; - u16 ANAR; - - if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs)) - status |= VELOCITY_LINK_FAIL; - - if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs)) - status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL; - else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs)) - status |= (VELOCITY_SPEED_1000); - else { - velocity_mii_read(regs, MII_ADVERTISE, &ANAR); - if (ANAR & ADVERTISE_100FULL) - status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL); - else if (ANAR & ADVERTISE_100HALF) - status |= VELOCITY_SPEED_100; - else if (ANAR & ADVERTISE_10FULL) - status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL); - else - status |= (VELOCITY_SPEED_10); - } - - if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) { - velocity_mii_read(regs, MII_ADVERTISE, &ANAR); - if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) - == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) { - if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs)) - status |= VELOCITY_AUTONEG_ENABLE; - } - } - - return status; -} - -/** - * velocity_mii_write - write MII data - * @regs: velocity registers - * @index: MII register index - * @data: 16bit data for the MII register - * - * Perform a single write to an MII 16bit register. Returns zero - * on success or -ETIMEDOUT if the PHY did not respond. - */ -static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data) -{ - u16 ww; - - /* - * Disable MIICR_MAUTO, so that mii addr can be set normally - */ - safe_disable_mii_autopoll(regs); - - /* MII reg offset */ - writeb(mii_addr, ®s->MIIADR); - /* set MII data */ - writew(data, ®s->MIIDATA); - - /* turn on MIICR_WCMD */ - BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR); - - /* W_MAX_TIMEOUT is the timeout period */ - for (ww = 0; ww < W_MAX_TIMEOUT; ww++) { - udelay(5); - if (!(readb(®s->MIICR) & MIICR_WCMD)) - break; - } - enable_mii_autopoll(regs); - - if (ww == W_MAX_TIMEOUT) - return -ETIMEDOUT; - return 0; -} - -/** - * set_mii_flow_control - flow control setup - * @vptr: velocity interface - * - * Set up the flow control on this interface according to - * the supplied user/eeprom options. - */ -static void set_mii_flow_control(struct velocity_info *vptr) -{ - /*Enable or Disable PAUSE in ANAR */ - switch (vptr->options.flow_cntl) { - case FLOW_CNTL_TX: - MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); - MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); - break; - - case FLOW_CNTL_RX: - MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); - MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); - break; - - case FLOW_CNTL_TX_RX: - MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); - MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); - break; - - case FLOW_CNTL_DISABLE: - MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs); - MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs); - break; - default: - break; - } -} - -/** - * mii_set_auto_on - autonegotiate on - * @vptr: velocity - * - * Enable autonegotation on this interface - */ -static void mii_set_auto_on(struct velocity_info *vptr) -{ - if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs)) - MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs); - else - MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); -} - -static u32 check_connection_type(struct mac_regs __iomem *regs) -{ - u32 status = 0; - u8 PHYSR0; - u16 ANAR; - PHYSR0 = readb(®s->PHYSR0); - - /* - if (!(PHYSR0 & PHYSR0_LINKGD)) - status|=VELOCITY_LINK_FAIL; - */ - - if (PHYSR0 & PHYSR0_FDPX) - status |= VELOCITY_DUPLEX_FULL; - - if (PHYSR0 & PHYSR0_SPDG) - status |= VELOCITY_SPEED_1000; - else if (PHYSR0 & PHYSR0_SPD10) - status |= VELOCITY_SPEED_10; - else - status |= VELOCITY_SPEED_100; - - if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) { - velocity_mii_read(regs, MII_ADVERTISE, &ANAR); - if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) - == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) { - if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs)) - status |= VELOCITY_AUTONEG_ENABLE; - } - } - - return status; -} - -/** - * velocity_set_media_mode - set media mode - * @mii_status: old MII link state - * - * Check the media link state and configure the flow control - * PHY and also velocity hardware setup accordingly. In particular - * we need to set up CD polling and frame bursting. - */ -static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status) -{ - u32 curr_status; - struct mac_regs __iomem *regs = vptr->mac_regs; - - vptr->mii_status = mii_check_media_mode(vptr->mac_regs); - curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL); - - /* Set mii link status */ - set_mii_flow_control(vptr); - - /* - Check if new status is consistent with current status - if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) || - (mii_status==curr_status)) { - vptr->mii_status=mii_check_media_mode(vptr->mac_regs); - vptr->mii_status=check_connection_type(vptr->mac_regs); - VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n"); - return 0; - } - */ - - if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) - MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs); - - /* - * If connection type is AUTO - */ - if (mii_status & VELOCITY_AUTONEG_ENABLE) { - VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n"); - /* clear force MAC mode bit */ - BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR); - /* set duplex mode of MAC according to duplex mode of MII */ - MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs); - MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs); - MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); - - /* enable AUTO-NEGO mode */ - mii_set_auto_on(vptr); - } else { - u16 CTRL1000; - u16 ANAR; - u8 CHIPGCR; - - /* - * 1. if it's 3119, disable frame bursting in halfduplex mode - * and enable it in fullduplex mode - * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR - * 3. only enable CD heart beat counter in 10HD mode - */ - - /* set force MAC mode bit */ - BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); - - CHIPGCR = readb(®s->CHIPGCR); - - if (mii_status & VELOCITY_SPEED_1000) - CHIPGCR |= CHIPGCR_FCGMII; - else - CHIPGCR &= ~CHIPGCR_FCGMII; - - if (mii_status & VELOCITY_DUPLEX_FULL) { - CHIPGCR |= CHIPGCR_FCFDX; - writeb(CHIPGCR, ®s->CHIPGCR); - VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n"); - if (vptr->rev_id < REV_ID_VT3216_A0) - BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); - } else { - CHIPGCR &= ~CHIPGCR_FCFDX; - VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n"); - writeb(CHIPGCR, ®s->CHIPGCR); - if (vptr->rev_id < REV_ID_VT3216_A0) - BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); - } - - velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000); - CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); - if ((mii_status & VELOCITY_SPEED_1000) && - (mii_status & VELOCITY_DUPLEX_FULL)) { - CTRL1000 |= ADVERTISE_1000FULL; - } - velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000); - - if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10)) - BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); - else - BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); - - /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */ - velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR); - ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)); - if (mii_status & VELOCITY_SPEED_100) { - if (mii_status & VELOCITY_DUPLEX_FULL) - ANAR |= ADVERTISE_100FULL; - else - ANAR |= ADVERTISE_100HALF; - } else if (mii_status & VELOCITY_SPEED_10) { - if (mii_status & VELOCITY_DUPLEX_FULL) - ANAR |= ADVERTISE_10FULL; - else - ANAR |= ADVERTISE_10HALF; - } - velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR); - /* enable AUTO-NEGO mode */ - mii_set_auto_on(vptr); - /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */ - } - /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */ - /* vptr->mii_status=check_connection_type(vptr->mac_regs); */ - return VELOCITY_LINK_CHANGE; -} - -/** - * velocity_print_link_status - link status reporting - * @vptr: velocity to report on - * - * Turn the link status of the velocity card into a kernel log - * description of the new link state, detailing speed and duplex - * status - */ -static void velocity_print_link_status(struct velocity_info *vptr) -{ - - if (vptr->mii_status & VELOCITY_LINK_FAIL) { - VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name); - } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) { - VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link auto-negotiation", vptr->dev->name); - - if (vptr->mii_status & VELOCITY_SPEED_1000) - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps"); - else if (vptr->mii_status & VELOCITY_SPEED_100) - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps"); - else - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps"); - - if (vptr->mii_status & VELOCITY_DUPLEX_FULL) - VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n"); - else - VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n"); - } else { - VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name); - switch (vptr->options.spd_dpx) { - case SPD_DPX_1000_FULL: - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps full duplex\n"); - break; - case SPD_DPX_100_HALF: - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n"); - break; - case SPD_DPX_100_FULL: - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n"); - break; - case SPD_DPX_10_HALF: - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n"); - break; - case SPD_DPX_10_FULL: - VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n"); - break; - default: - break; - } - } -} - -/** - * enable_flow_control_ability - flow control - * @vptr: veloity to configure - * - * Set up flow control according to the flow control options - * determined by the eeprom/configuration. - */ -static void enable_flow_control_ability(struct velocity_info *vptr) -{ - - struct mac_regs __iomem *regs = vptr->mac_regs; - - switch (vptr->options.flow_cntl) { - - case FLOW_CNTL_DEFAULT: - if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0)) - writel(CR0_FDXRFCEN, ®s->CR0Set); - else - writel(CR0_FDXRFCEN, ®s->CR0Clr); - - if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0)) - writel(CR0_FDXTFCEN, ®s->CR0Set); - else - writel(CR0_FDXTFCEN, ®s->CR0Clr); - break; - - case FLOW_CNTL_TX: - writel(CR0_FDXTFCEN, ®s->CR0Set); - writel(CR0_FDXRFCEN, ®s->CR0Clr); - break; - - case FLOW_CNTL_RX: - writel(CR0_FDXRFCEN, ®s->CR0Set); - writel(CR0_FDXTFCEN, ®s->CR0Clr); - break; - - case FLOW_CNTL_TX_RX: - writel(CR0_FDXTFCEN, ®s->CR0Set); - writel(CR0_FDXRFCEN, ®s->CR0Set); - break; - - case FLOW_CNTL_DISABLE: - writel(CR0_FDXRFCEN, ®s->CR0Clr); - writel(CR0_FDXTFCEN, ®s->CR0Clr); - break; - - default: - break; - } - -} - -/** - * velocity_soft_reset - soft reset - * @vptr: velocity to reset - * - * Kick off a soft reset of the velocity adapter and then poll - * until the reset sequence has completed before returning. - */ -static int velocity_soft_reset(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - int i = 0; - - writel(CR0_SFRST, ®s->CR0Set); - - for (i = 0; i < W_MAX_TIMEOUT; i++) { - udelay(5); - if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set)) - break; - } - - if (i == W_MAX_TIMEOUT) { - writel(CR0_FORSRST, ®s->CR0Set); - /* FIXME: PCI POSTING */ - /* delay 2ms */ - mdelay(2); - } - return 0; -} - -/** - * velocity_set_multi - filter list change callback - * @dev: network device - * - * Called by the network layer when the filter lists need to change - * for a velocity adapter. Reload the CAMs with the new address - * filter ruleset. - */ -static void velocity_set_multi(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - struct mac_regs __iomem *regs = vptr->mac_regs; - u8 rx_mode; - int i; - struct netdev_hw_addr *ha; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - writel(0xffffffff, ®s->MARCAM[0]); - writel(0xffffffff, ®s->MARCAM[4]); - rx_mode = (RCR_AM | RCR_AB | RCR_PROM); - } else if ((netdev_mc_count(dev) > vptr->multicast_limit) || - (dev->flags & IFF_ALLMULTI)) { - writel(0xffffffff, ®s->MARCAM[0]); - writel(0xffffffff, ®s->MARCAM[4]); - rx_mode = (RCR_AM | RCR_AB); - } else { - int offset = MCAM_SIZE - vptr->multicast_limit; - mac_get_cam_mask(regs, vptr->mCAMmask); - - i = 0; - netdev_for_each_mc_addr(ha, dev) { - mac_set_cam(regs, i + offset, ha->addr); - vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7); - i++; - } - - mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = RCR_AM | RCR_AB | RCR_AP; - } - if (dev->mtu > 1500) - rx_mode |= RCR_AL; - - BYTE_REG_BITS_ON(rx_mode, ®s->RCR); - -} - -/* - * MII access , media link mode setting functions - */ - -/** - * mii_init - set up MII - * @vptr: velocity adapter - * @mii_status: links tatus - * - * Set up the PHY for the current link state. - */ -static void mii_init(struct velocity_info *vptr, u32 mii_status) -{ - u16 BMCR; - - switch (PHYID_GET_PHY_ID(vptr->phy_id)) { - case PHYID_CICADA_CS8201: - /* - * Reset to hardware default - */ - MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); - /* - * Turn on ECHODIS bit in NWay-forced full mode and turn it - * off it in NWay-forced half mode for NWay-forced v.s. - * legacy-forced issue. - */ - if (vptr->mii_status & VELOCITY_DUPLEX_FULL) - MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); - else - MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); - /* - * Turn on Link/Activity LED enable bit for CIS8201 - */ - MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs); - break; - case PHYID_VT3216_32BIT: - case PHYID_VT3216_64BIT: - /* - * Reset to hardware default - */ - MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); - /* - * Turn on ECHODIS bit in NWay-forced full mode and turn it - * off it in NWay-forced half mode for NWay-forced v.s. - * legacy-forced issue - */ - if (vptr->mii_status & VELOCITY_DUPLEX_FULL) - MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); - else - MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs); - break; - - case PHYID_MARVELL_1000: - case PHYID_MARVELL_1000S: - /* - * Assert CRS on Transmit - */ - MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs); - /* - * Reset to hardware default - */ - MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs); - break; - default: - ; - } - velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR); - if (BMCR & BMCR_ISOLATE) { - BMCR &= ~BMCR_ISOLATE; - velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR); - } -} - -/** - * setup_queue_timers - Setup interrupt timers - * - * Setup interrupt frequency during suppression (timeout if the frame - * count isn't filled). - */ -static void setup_queue_timers(struct velocity_info *vptr) -{ - /* Only for newer revisions */ - if (vptr->rev_id >= REV_ID_VT3216_A0) { - u8 txqueue_timer = 0; - u8 rxqueue_timer = 0; - - if (vptr->mii_status & (VELOCITY_SPEED_1000 | - VELOCITY_SPEED_100)) { - txqueue_timer = vptr->options.txqueue_timer; - rxqueue_timer = vptr->options.rxqueue_timer; - } - - writeb(txqueue_timer, &vptr->mac_regs->TQETMR); - writeb(rxqueue_timer, &vptr->mac_regs->RQETMR); - } -} - -/** - * setup_adaptive_interrupts - Setup interrupt suppression - * - * @vptr velocity adapter - * - * The velocity is able to suppress interrupt during high interrupt load. - * This function turns on that feature. - */ -static void setup_adaptive_interrupts(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - u16 tx_intsup = vptr->options.tx_intsup; - u16 rx_intsup = vptr->options.rx_intsup; - - /* Setup default interrupt mask (will be changed below) */ - vptr->int_mask = INT_MASK_DEF; - - /* Set Tx Interrupt Suppression Threshold */ - writeb(CAMCR_PS0, ®s->CAMCR); - if (tx_intsup != 0) { - vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I | - ISR_PTX2I | ISR_PTX3I); - writew(tx_intsup, ®s->ISRCTL); - } else - writew(ISRCTL_TSUPDIS, ®s->ISRCTL); - - /* Set Rx Interrupt Suppression Threshold */ - writeb(CAMCR_PS1, ®s->CAMCR); - if (rx_intsup != 0) { - vptr->int_mask &= ~ISR_PRXI; - writew(rx_intsup, ®s->ISRCTL); - } else - writew(ISRCTL_RSUPDIS, ®s->ISRCTL); - - /* Select page to interrupt hold timer */ - writeb(0, ®s->CAMCR); -} - -/** - * velocity_init_registers - initialise MAC registers - * @vptr: velocity to init - * @type: type of initialisation (hot or cold) - * - * Initialise the MAC on a reset or on first set up on the - * hardware. - */ -static void velocity_init_registers(struct velocity_info *vptr, - enum velocity_init_type type) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - int i, mii_status; - - mac_wol_reset(regs); - - switch (type) { - case VELOCITY_INIT_RESET: - case VELOCITY_INIT_WOL: - - netif_stop_queue(vptr->dev); - - /* - * Reset RX to prevent RX pointer not on the 4X location - */ - velocity_rx_reset(vptr); - mac_rx_queue_run(regs); - mac_rx_queue_wake(regs); - - mii_status = velocity_get_opt_media_mode(vptr); - if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { - velocity_print_link_status(vptr); - if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) - netif_wake_queue(vptr->dev); - } - - enable_flow_control_ability(vptr); - - mac_clear_isr(regs); - writel(CR0_STOP, ®s->CR0Clr); - writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), - ®s->CR0Set); - - break; - - case VELOCITY_INIT_COLD: - default: - /* - * Do reset - */ - velocity_soft_reset(vptr); - mdelay(5); - - mac_eeprom_reload(regs); - for (i = 0; i < 6; i++) - writeb(vptr->dev->dev_addr[i], &(regs->PAR[i])); - - /* - * clear Pre_ACPI bit. - */ - BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA)); - mac_set_rx_thresh(regs, vptr->options.rx_thresh); - mac_set_dma_length(regs, vptr->options.DMA_length); - - writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet); - /* - * Back off algorithm use original IEEE standard - */ - BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB); - - /* - * Init CAM filter - */ - velocity_init_cam_filter(vptr); - - /* - * Set packet filter: Receive directed and broadcast address - */ - velocity_set_multi(vptr->dev); - - /* - * Enable MII auto-polling - */ - enable_mii_autopoll(regs); - - setup_adaptive_interrupts(vptr); - - writel(vptr->rx.pool_dma, ®s->RDBaseLo); - writew(vptr->options.numrx - 1, ®s->RDCSize); - mac_rx_queue_run(regs); - mac_rx_queue_wake(regs); - - writew(vptr->options.numtx - 1, ®s->TDCSize); - - for (i = 0; i < vptr->tx.numq; i++) { - writel(vptr->tx.pool_dma[i], ®s->TDBaseLo[i]); - mac_tx_queue_run(regs, i); - } - - init_flow_control_register(vptr); - - writel(CR0_STOP, ®s->CR0Clr); - writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set); - - mii_status = velocity_get_opt_media_mode(vptr); - netif_stop_queue(vptr->dev); - - mii_init(vptr, mii_status); - - if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) { - velocity_print_link_status(vptr); - if (!(vptr->mii_status & VELOCITY_LINK_FAIL)) - netif_wake_queue(vptr->dev); - } - - enable_flow_control_ability(vptr); - mac_hw_mibs_init(regs); - mac_write_int_mask(vptr->int_mask, regs); - mac_clear_isr(regs); - - } -} - -static void velocity_give_many_rx_descs(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - int avail, dirty, unusable; - - /* - * RD number must be equal to 4X per hardware spec - * (programming guide rev 1.20, p.13) - */ - if (vptr->rx.filled < 4) - return; - - wmb(); - - unusable = vptr->rx.filled & 0x0003; - dirty = vptr->rx.dirty - unusable; - for (avail = vptr->rx.filled & 0xfffc; avail; avail--) { - dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; - vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC; - } - - writew(vptr->rx.filled & 0xfffc, ®s->RBRDU); - vptr->rx.filled = unusable; -} - -/** - * velocity_init_dma_rings - set up DMA rings - * @vptr: Velocity to set up - * - * Allocate PCI mapped DMA rings for the receive and transmit layer - * to use. - */ -static int velocity_init_dma_rings(struct velocity_info *vptr) -{ - struct velocity_opt *opt = &vptr->options; - const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc); - const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc); - struct pci_dev *pdev = vptr->pdev; - dma_addr_t pool_dma; - void *pool; - unsigned int i; - - /* - * Allocate all RD/TD rings a single pool. - * - * pci_alloc_consistent() fulfills the requirement for 64 bytes - * alignment - */ - pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq + - rx_ring_size, &pool_dma); - if (!pool) { - dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n", - vptr->dev->name); - return -ENOMEM; - } - - vptr->rx.ring = pool; - vptr->rx.pool_dma = pool_dma; - - pool += rx_ring_size; - pool_dma += rx_ring_size; - - for (i = 0; i < vptr->tx.numq; i++) { - vptr->tx.rings[i] = pool; - vptr->tx.pool_dma[i] = pool_dma; - pool += tx_ring_size; - pool_dma += tx_ring_size; - } - - return 0; -} - -static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu) -{ - vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32; -} - -/** - * velocity_alloc_rx_buf - allocate aligned receive buffer - * @vptr: velocity - * @idx: ring index - * - * Allocate a new full sized buffer for the reception of a frame and - * map it into PCI space for the hardware to use. The hardware - * requires *64* byte alignment of the buffer which makes life - * less fun than would be ideal. - */ -static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) -{ - struct rx_desc *rd = &(vptr->rx.ring[idx]); - struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); - - rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64); - if (rd_info->skb == NULL) - return -ENOMEM; - - /* - * Do the gymnastics to get the buffer head for data at - * 64byte alignment. - */ - skb_reserve(rd_info->skb, - 64 - ((unsigned long) rd_info->skb->data & 63)); - rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, - vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); - - /* - * Fill in the descriptor to match - */ - - *((u32 *) & (rd->rdesc0)) = 0; - rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN; - rd->pa_low = cpu_to_le32(rd_info->skb_dma); - rd->pa_high = 0; - return 0; -} - - -static int velocity_rx_refill(struct velocity_info *vptr) -{ - int dirty = vptr->rx.dirty, done = 0; - - do { - struct rx_desc *rd = vptr->rx.ring + dirty; - - /* Fine for an all zero Rx desc at init time as well */ - if (rd->rdesc0.len & OWNED_BY_NIC) - break; - - if (!vptr->rx.info[dirty].skb) { - if (velocity_alloc_rx_buf(vptr, dirty) < 0) - break; - } - done++; - dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0; - } while (dirty != vptr->rx.curr); - - if (done) { - vptr->rx.dirty = dirty; - vptr->rx.filled += done; - } - - return done; -} - -/** - * velocity_free_rd_ring - free receive ring - * @vptr: velocity to clean up - * - * Free the receive buffers for each ring slot and any - * attached socket buffers that need to go away. - */ -static void velocity_free_rd_ring(struct velocity_info *vptr) -{ - int i; - - if (vptr->rx.info == NULL) - return; - - for (i = 0; i < vptr->options.numrx; i++) { - struct velocity_rd_info *rd_info = &(vptr->rx.info[i]); - struct rx_desc *rd = vptr->rx.ring + i; - - memset(rd, 0, sizeof(*rd)); - - if (!rd_info->skb) - continue; - pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, - PCI_DMA_FROMDEVICE); - rd_info->skb_dma = 0; - - dev_kfree_skb(rd_info->skb); - rd_info->skb = NULL; - } - - kfree(vptr->rx.info); - vptr->rx.info = NULL; -} - -/** - * velocity_init_rd_ring - set up receive ring - * @vptr: velocity to configure - * - * Allocate and set up the receive buffers for each ring slot and - * assign them to the network adapter. - */ -static int velocity_init_rd_ring(struct velocity_info *vptr) -{ - int ret = -ENOMEM; - - vptr->rx.info = kcalloc(vptr->options.numrx, - sizeof(struct velocity_rd_info), GFP_KERNEL); - if (!vptr->rx.info) - goto out; - - velocity_init_rx_ring_indexes(vptr); - - if (velocity_rx_refill(vptr) != vptr->options.numrx) { - VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR - "%s: failed to allocate RX buffer.\n", vptr->dev->name); - velocity_free_rd_ring(vptr); - goto out; - } - - ret = 0; -out: - return ret; -} - -/** - * velocity_init_td_ring - set up transmit ring - * @vptr: velocity - * - * Set up the transmit ring and chain the ring pointers together. - * Returns zero on success or a negative posix errno code for - * failure. - */ -static int velocity_init_td_ring(struct velocity_info *vptr) -{ - int j; - - /* Init the TD ring entries */ - for (j = 0; j < vptr->tx.numq; j++) { - - vptr->tx.infos[j] = kcalloc(vptr->options.numtx, - sizeof(struct velocity_td_info), - GFP_KERNEL); - if (!vptr->tx.infos[j]) { - while (--j >= 0) - kfree(vptr->tx.infos[j]); - return -ENOMEM; - } - - vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0; - } - return 0; -} - -/** - * velocity_free_dma_rings - free PCI ring pointers - * @vptr: Velocity to free from - * - * Clean up the PCI ring buffers allocated to this velocity. - */ -static void velocity_free_dma_rings(struct velocity_info *vptr) -{ - const int size = vptr->options.numrx * sizeof(struct rx_desc) + - vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq; - - pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma); -} - -static int velocity_init_rings(struct velocity_info *vptr, int mtu) -{ - int ret; - - velocity_set_rxbufsize(vptr, mtu); - - ret = velocity_init_dma_rings(vptr); - if (ret < 0) - goto out; - - ret = velocity_init_rd_ring(vptr); - if (ret < 0) - goto err_free_dma_rings_0; - - ret = velocity_init_td_ring(vptr); - if (ret < 0) - goto err_free_rd_ring_1; -out: - return ret; - -err_free_rd_ring_1: - velocity_free_rd_ring(vptr); -err_free_dma_rings_0: - velocity_free_dma_rings(vptr); - goto out; -} - -/** - * velocity_free_tx_buf - free transmit buffer - * @vptr: velocity - * @tdinfo: buffer - * - * Release an transmit buffer. If the buffer was preallocated then - * recycle it, if not then unmap the buffer. - */ -static void velocity_free_tx_buf(struct velocity_info *vptr, - struct velocity_td_info *tdinfo, struct tx_desc *td) -{ - struct sk_buff *skb = tdinfo->skb; - - /* - * Don't unmap the pre-allocated tx_bufs - */ - if (tdinfo->skb_dma) { - int i; - - for (i = 0; i < tdinfo->nskb_dma; i++) { - size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN); - - /* For scatter-gather */ - if (skb_shinfo(skb)->nr_frags > 0) - pktlen = max_t(size_t, pktlen, - td->td_buf[i].size & ~TD_QUEUE); - - pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], - le16_to_cpu(pktlen), PCI_DMA_TODEVICE); - } - } - dev_kfree_skb_irq(skb); - tdinfo->skb = NULL; -} - -/* - * FIXME: could we merge this with velocity_free_tx_buf ? - */ -static void velocity_free_td_ring_entry(struct velocity_info *vptr, - int q, int n) -{ - struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]); - int i; - - if (td_info == NULL) - return; - - if (td_info->skb) { - for (i = 0; i < td_info->nskb_dma; i++) { - if (td_info->skb_dma[i]) { - pci_unmap_single(vptr->pdev, td_info->skb_dma[i], - td_info->skb->len, PCI_DMA_TODEVICE); - td_info->skb_dma[i] = 0; - } - } - dev_kfree_skb(td_info->skb); - td_info->skb = NULL; - } -} - -/** - * velocity_free_td_ring - free td ring - * @vptr: velocity - * - * Free up the transmit ring for this particular velocity adapter. - * We free the ring contents but not the ring itself. - */ -static void velocity_free_td_ring(struct velocity_info *vptr) -{ - int i, j; - - for (j = 0; j < vptr->tx.numq; j++) { - if (vptr->tx.infos[j] == NULL) - continue; - for (i = 0; i < vptr->options.numtx; i++) - velocity_free_td_ring_entry(vptr, j, i); - - kfree(vptr->tx.infos[j]); - vptr->tx.infos[j] = NULL; - } -} - -static void velocity_free_rings(struct velocity_info *vptr) -{ - velocity_free_td_ring(vptr); - velocity_free_rd_ring(vptr); - velocity_free_dma_rings(vptr); -} - -/** - * velocity_error - handle error from controller - * @vptr: velocity - * @status: card status - * - * Process an error report from the hardware and attempt to recover - * the card itself. At the moment we cannot recover from some - * theoretically impossible errors but this could be fixed using - * the pci_device_failed logic to bounce the hardware - * - */ -static void velocity_error(struct velocity_info *vptr, int status) -{ - - if (status & ISR_TXSTLI) { - struct mac_regs __iomem *regs = vptr->mac_regs; - - printk(KERN_ERR "TD structure error TDindex=%hx\n", readw(®s->TDIdx[0])); - BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR); - writew(TRDCSR_RUN, ®s->TDCSRClr); - netif_stop_queue(vptr->dev); - - /* FIXME: port over the pci_device_failed code and use it - here */ - } - - if (status & ISR_SRCI) { - struct mac_regs __iomem *regs = vptr->mac_regs; - int linked; - - if (vptr->options.spd_dpx == SPD_DPX_AUTO) { - vptr->mii_status = check_connection_type(regs); - - /* - * If it is a 3119, disable frame bursting in - * halfduplex mode and enable it in fullduplex - * mode - */ - if (vptr->rev_id < REV_ID_VT3216_A0) { - if (vptr->mii_status & VELOCITY_DUPLEX_FULL) - BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); - else - BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); - } - /* - * Only enable CD heart beat counter in 10HD mode - */ - if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10)) - BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG); - else - BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG); - - setup_queue_timers(vptr); - } - /* - * Get link status from PHYSR0 - */ - linked = readb(®s->PHYSR0) & PHYSR0_LINKGD; - - if (linked) { - vptr->mii_status &= ~VELOCITY_LINK_FAIL; - netif_carrier_on(vptr->dev); - } else { - vptr->mii_status |= VELOCITY_LINK_FAIL; - netif_carrier_off(vptr->dev); - } - - velocity_print_link_status(vptr); - enable_flow_control_ability(vptr); - - /* - * Re-enable auto-polling because SRCI will disable - * auto-polling - */ - - enable_mii_autopoll(regs); - - if (vptr->mii_status & VELOCITY_LINK_FAIL) - netif_stop_queue(vptr->dev); - else - netif_wake_queue(vptr->dev); - - } - if (status & ISR_MIBFI) - velocity_update_hw_mibs(vptr); - if (status & ISR_LSTEI) - mac_rx_queue_wake(vptr->mac_regs); -} - -/** - * tx_srv - transmit interrupt service - * @vptr; Velocity - * - * Scan the queues looking for transmitted packets that - * we can complete and clean up. Update any statistics as - * necessary/ - */ -static int velocity_tx_srv(struct velocity_info *vptr) -{ - struct tx_desc *td; - int qnum; - int full = 0; - int idx; - int works = 0; - struct velocity_td_info *tdinfo; - struct net_device_stats *stats = &vptr->dev->stats; - - for (qnum = 0; qnum < vptr->tx.numq; qnum++) { - for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0; - idx = (idx + 1) % vptr->options.numtx) { - - /* - * Get Tx Descriptor - */ - td = &(vptr->tx.rings[qnum][idx]); - tdinfo = &(vptr->tx.infos[qnum][idx]); - - if (td->tdesc0.len & OWNED_BY_NIC) - break; - - if ((works++ > 15)) - break; - - if (td->tdesc0.TSR & TSR0_TERR) { - stats->tx_errors++; - stats->tx_dropped++; - if (td->tdesc0.TSR & TSR0_CDH) - stats->tx_heartbeat_errors++; - if (td->tdesc0.TSR & TSR0_CRS) - stats->tx_carrier_errors++; - if (td->tdesc0.TSR & TSR0_ABT) - stats->tx_aborted_errors++; - if (td->tdesc0.TSR & TSR0_OWC) - stats->tx_window_errors++; - } else { - stats->tx_packets++; - stats->tx_bytes += tdinfo->skb->len; - } - velocity_free_tx_buf(vptr, tdinfo, td); - vptr->tx.used[qnum]--; - } - vptr->tx.tail[qnum] = idx; - - if (AVAIL_TD(vptr, qnum) < 1) - full = 1; - } - /* - * Look to see if we should kick the transmit network - * layer for more work. - */ - if (netif_queue_stopped(vptr->dev) && (full == 0) && - (!(vptr->mii_status & VELOCITY_LINK_FAIL))) { - netif_wake_queue(vptr->dev); - } - return works; -} - -/** - * velocity_rx_csum - checksum process - * @rd: receive packet descriptor - * @skb: network layer packet buffer - * - * Process the status bits for the received packet and determine - * if the checksum was computed and verified by the hardware - */ -static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb) -{ - skb_checksum_none_assert(skb); - - if (rd->rdesc1.CSM & CSM_IPKT) { - if (rd->rdesc1.CSM & CSM_IPOK) { - if ((rd->rdesc1.CSM & CSM_TCPKT) || - (rd->rdesc1.CSM & CSM_UDPKT)) { - if (!(rd->rdesc1.CSM & CSM_TUPOK)) - return; - } - skb->ip_summed = CHECKSUM_UNNECESSARY; - } - } -} - -/** - * velocity_rx_copy - in place Rx copy for small packets - * @rx_skb: network layer packet buffer candidate - * @pkt_size: received data size - * @rd: receive packet descriptor - * @dev: network device - * - * Replace the current skb that is scheduled for Rx processing by a - * shorter, immediately allocated skb, if the received packet is small - * enough. This function returns a negative value if the received - * packet is too big or if memory is exhausted. - */ -static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size, - struct velocity_info *vptr) -{ - int ret = -1; - if (pkt_size < rx_copybreak) { - struct sk_buff *new_skb; - - new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size); - if (new_skb) { - new_skb->ip_summed = rx_skb[0]->ip_summed; - skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size); - *rx_skb = new_skb; - ret = 0; - } - - } - return ret; -} - -/** - * velocity_iph_realign - IP header alignment - * @vptr: velocity we are handling - * @skb: network layer packet buffer - * @pkt_size: received data size - * - * Align IP header on a 2 bytes boundary. This behavior can be - * configured by the user. - */ -static inline void velocity_iph_realign(struct velocity_info *vptr, - struct sk_buff *skb, int pkt_size) -{ - if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) { - memmove(skb->data + 2, skb->data, pkt_size); - skb_reserve(skb, 2); - } -} - -/** - * velocity_receive_frame - received packet processor - * @vptr: velocity we are handling - * @idx: ring index - * - * A packet has arrived. We process the packet and if appropriate - * pass the frame up the network stack - */ -static int velocity_receive_frame(struct velocity_info *vptr, int idx) -{ - void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); - struct net_device_stats *stats = &vptr->dev->stats; - struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); - struct rx_desc *rd = &(vptr->rx.ring[idx]); - int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff; - struct sk_buff *skb; - - if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) { - VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name); - stats->rx_length_errors++; - return -EINVAL; - } - - if (rd->rdesc0.RSR & RSR_MAR) - stats->multicast++; - - skb = rd_info->skb; - - pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma, - vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); - - /* - * Drop frame not meeting IEEE 802.3 - */ - - if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) { - if (rd->rdesc0.RSR & RSR_RL) { - stats->rx_length_errors++; - return -EINVAL; - } - } - - pci_action = pci_dma_sync_single_for_device; - - velocity_rx_csum(rd, skb); - - if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) { - velocity_iph_realign(vptr, skb, pkt_len); - pci_action = pci_unmap_single; - rd_info->skb = NULL; - } - - pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, - PCI_DMA_FROMDEVICE); - - skb_put(skb, pkt_len - 4); - skb->protocol = eth_type_trans(skb, vptr->dev); - - if (rd->rdesc0.RSR & RSR_DETAG) { - u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG)); - - __vlan_hwaccel_put_tag(skb, vid); - } - netif_rx(skb); - - stats->rx_bytes += pkt_len; - stats->rx_packets++; - - return 0; -} - -/** - * velocity_rx_srv - service RX interrupt - * @vptr: velocity - * - * Walk the receive ring of the velocity adapter and remove - * any received packets from the receive queue. Hand the ring - * slots back to the adapter for reuse. - */ -static int velocity_rx_srv(struct velocity_info *vptr, int budget_left) -{ - struct net_device_stats *stats = &vptr->dev->stats; - int rd_curr = vptr->rx.curr; - int works = 0; - - while (works < budget_left) { - struct rx_desc *rd = vptr->rx.ring + rd_curr; - - if (!vptr->rx.info[rd_curr].skb) - break; - - if (rd->rdesc0.len & OWNED_BY_NIC) - break; - - rmb(); - - /* - * Don't drop CE or RL error frame although RXOK is off - */ - if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) { - if (velocity_receive_frame(vptr, rd_curr) < 0) - stats->rx_dropped++; - } else { - if (rd->rdesc0.RSR & RSR_CRC) - stats->rx_crc_errors++; - if (rd->rdesc0.RSR & RSR_FAE) - stats->rx_frame_errors++; - - stats->rx_dropped++; - } - - rd->size |= RX_INTEN; - - rd_curr++; - if (rd_curr >= vptr->options.numrx) - rd_curr = 0; - works++; - } - - vptr->rx.curr = rd_curr; - - if ((works > 0) && (velocity_rx_refill(vptr) > 0)) - velocity_give_many_rx_descs(vptr); - - VAR_USED(stats); - return works; -} - -static int velocity_poll(struct napi_struct *napi, int budget) -{ - struct velocity_info *vptr = container_of(napi, - struct velocity_info, napi); - unsigned int rx_done; - unsigned long flags; - - spin_lock_irqsave(&vptr->lock, flags); - /* - * Do rx and tx twice for performance (taken from the VIA - * out-of-tree driver). - */ - rx_done = velocity_rx_srv(vptr, budget / 2); - velocity_tx_srv(vptr); - rx_done += velocity_rx_srv(vptr, budget - rx_done); - velocity_tx_srv(vptr); - - /* If budget not fully consumed, exit the polling mode */ - if (rx_done < budget) { - napi_complete(napi); - mac_enable_int(vptr->mac_regs); - } - spin_unlock_irqrestore(&vptr->lock, flags); - - return rx_done; -} - -/** - * velocity_intr - interrupt callback - * @irq: interrupt number - * @dev_instance: interrupting device - * - * Called whenever an interrupt is generated by the velocity - * adapter IRQ line. We may not be the source of the interrupt - * and need to identify initially if we are, and if not exit as - * efficiently as possible. - */ -static irqreturn_t velocity_intr(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct velocity_info *vptr = netdev_priv(dev); - u32 isr_status; - - spin_lock(&vptr->lock); - isr_status = mac_read_isr(vptr->mac_regs); - - /* Not us ? */ - if (isr_status == 0) { - spin_unlock(&vptr->lock); - return IRQ_NONE; - } - - /* Ack the interrupt */ - mac_write_isr(vptr->mac_regs, isr_status); - - if (likely(napi_schedule_prep(&vptr->napi))) { - mac_disable_int(vptr->mac_regs); - __napi_schedule(&vptr->napi); - } - - if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI))) - velocity_error(vptr, isr_status); - - spin_unlock(&vptr->lock); - - return IRQ_HANDLED; -} - -/** - * velocity_open - interface activation callback - * @dev: network layer device to open - * - * Called when the network layer brings the interface up. Returns - * a negative posix error code on failure, or zero on success. - * - * All the ring allocation and set up is done on open for this - * adapter to minimise memory usage when inactive - */ -static int velocity_open(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - int ret; - - ret = velocity_init_rings(vptr, dev->mtu); - if (ret < 0) - goto out; - - /* Ensure chip is running */ - pci_set_power_state(vptr->pdev, PCI_D0); - - velocity_init_registers(vptr, VELOCITY_INIT_COLD); - - ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED, - dev->name, dev); - if (ret < 0) { - /* Power down the chip */ - pci_set_power_state(vptr->pdev, PCI_D3hot); - velocity_free_rings(vptr); - goto out; - } - - velocity_give_many_rx_descs(vptr); - - mac_enable_int(vptr->mac_regs); - netif_start_queue(dev); - napi_enable(&vptr->napi); - vptr->flags |= VELOCITY_FLAGS_OPENED; -out: - return ret; -} - -/** - * velocity_shutdown - shut down the chip - * @vptr: velocity to deactivate - * - * Shuts down the internal operations of the velocity and - * disables interrupts, autopolling, transmit and receive - */ -static void velocity_shutdown(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - mac_disable_int(regs); - writel(CR0_STOP, ®s->CR0Set); - writew(0xFFFF, ®s->TDCSRClr); - writeb(0xFF, ®s->RDCSRClr); - safe_disable_mii_autopoll(regs); - mac_clear_isr(regs); -} - -/** - * velocity_change_mtu - MTU change callback - * @dev: network device - * @new_mtu: desired MTU - * - * Handle requests from the networking layer for MTU change on - * this interface. It gets called on a change by the network layer. - * Return zero for success or negative posix error code. - */ -static int velocity_change_mtu(struct net_device *dev, int new_mtu) -{ - struct velocity_info *vptr = netdev_priv(dev); - int ret = 0; - - if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) { - VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n", - vptr->dev->name); - ret = -EINVAL; - goto out_0; - } - - if (!netif_running(dev)) { - dev->mtu = new_mtu; - goto out_0; - } - - if (dev->mtu != new_mtu) { - struct velocity_info *tmp_vptr; - unsigned long flags; - struct rx_info rx; - struct tx_info tx; - - tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL); - if (!tmp_vptr) { - ret = -ENOMEM; - goto out_0; - } - - tmp_vptr->dev = dev; - tmp_vptr->pdev = vptr->pdev; - tmp_vptr->options = vptr->options; - tmp_vptr->tx.numq = vptr->tx.numq; - - ret = velocity_init_rings(tmp_vptr, new_mtu); - if (ret < 0) - goto out_free_tmp_vptr_1; - - spin_lock_irqsave(&vptr->lock, flags); - - netif_stop_queue(dev); - velocity_shutdown(vptr); - - rx = vptr->rx; - tx = vptr->tx; - - vptr->rx = tmp_vptr->rx; - vptr->tx = tmp_vptr->tx; - - tmp_vptr->rx = rx; - tmp_vptr->tx = tx; - - dev->mtu = new_mtu; - - velocity_init_registers(vptr, VELOCITY_INIT_COLD); - - velocity_give_many_rx_descs(vptr); - - mac_enable_int(vptr->mac_regs); - netif_start_queue(dev); - - spin_unlock_irqrestore(&vptr->lock, flags); - - velocity_free_rings(tmp_vptr); - -out_free_tmp_vptr_1: - kfree(tmp_vptr); - } -out_0: - return ret; -} - -/** - * velocity_mii_ioctl - MII ioctl handler - * @dev: network device - * @ifr: the ifreq block for the ioctl - * @cmd: the command - * - * Process MII requests made via ioctl from the network layer. These - * are used by tools like kudzu to interrogate the link state of the - * hardware - */ -static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - struct mac_regs __iomem *regs = vptr->mac_regs; - unsigned long flags; - struct mii_ioctl_data *miidata = if_mii(ifr); - int err; - - switch (cmd) { - case SIOCGMIIPHY: - miidata->phy_id = readb(®s->MIIADR) & 0x1f; - break; - case SIOCGMIIREG: - if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0) - return -ETIMEDOUT; - break; - case SIOCSMIIREG: - spin_lock_irqsave(&vptr->lock, flags); - err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in); - spin_unlock_irqrestore(&vptr->lock, flags); - check_connection_type(vptr->mac_regs); - if (err) - return err; - break; - default: - return -EOPNOTSUPP; - } - return 0; -} - -/** - * velocity_ioctl - ioctl entry point - * @dev: network device - * @rq: interface request ioctl - * @cmd: command code - * - * Called when the user issues an ioctl request to the network - * device in question. The velocity interface supports MII. - */ -static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - int ret; - - /* If we are asked for information and the device is power - saving then we need to bring the device back up to talk to it */ - - if (!netif_running(dev)) - pci_set_power_state(vptr->pdev, PCI_D0); - - switch (cmd) { - case SIOCGMIIPHY: /* Get address of MII PHY in use. */ - case SIOCGMIIREG: /* Read MII PHY register. */ - case SIOCSMIIREG: /* Write to MII PHY register. */ - ret = velocity_mii_ioctl(dev, rq, cmd); - break; - - default: - ret = -EOPNOTSUPP; - } - if (!netif_running(dev)) - pci_set_power_state(vptr->pdev, PCI_D3hot); - - - return ret; -} - -/** - * velocity_get_status - statistics callback - * @dev: network device - * - * Callback from the network layer to allow driver statistics - * to be resynchronized with hardware collected state. In the - * case of the velocity we need to pull the MIB counters from - * the hardware into the counters before letting the network - * layer display them. - */ -static struct net_device_stats *velocity_get_stats(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - - /* If the hardware is down, don't touch MII */ - if (!netif_running(dev)) - return &dev->stats; - - spin_lock_irq(&vptr->lock); - velocity_update_hw_mibs(vptr); - spin_unlock_irq(&vptr->lock); - - dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts]; - dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts]; - dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors]; - -// unsigned long rx_dropped; /* no space in linux buffers */ - dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions]; - /* detailed rx_errors: */ -// unsigned long rx_length_errors; -// unsigned long rx_over_errors; /* receiver ring buff overflow */ - dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE]; -// unsigned long rx_frame_errors; /* recv'd frame alignment error */ -// unsigned long rx_fifo_errors; /* recv'r fifo overrun */ -// unsigned long rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ -// unsigned long tx_fifo_errors; - - return &dev->stats; -} - -/** - * velocity_close - close adapter callback - * @dev: network device - * - * Callback from the network layer when the velocity is being - * deactivated by the network layer - */ -static int velocity_close(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - - napi_disable(&vptr->napi); - netif_stop_queue(dev); - velocity_shutdown(vptr); - - if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) - velocity_get_ip(vptr); - if (dev->irq != 0) - free_irq(dev->irq, dev); - - /* Power down the chip */ - pci_set_power_state(vptr->pdev, PCI_D3hot); - - velocity_free_rings(vptr); - - vptr->flags &= (~VELOCITY_FLAGS_OPENED); - return 0; -} - -/** - * velocity_xmit - transmit packet callback - * @skb: buffer to transmit - * @dev: network device - * - * Called by the networ layer to request a packet is queued to - * the velocity. Returns zero on success. - */ -static netdev_tx_t velocity_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - int qnum = 0; - struct tx_desc *td_ptr; - struct velocity_td_info *tdinfo; - unsigned long flags; - int pktlen; - int index, prev; - int i = 0; - - if (skb_padto(skb, ETH_ZLEN)) - goto out; - - /* The hardware can handle at most 7 memory segments, so merge - * the skb if there are more */ - if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) { - kfree_skb(skb); - return NETDEV_TX_OK; - } - - pktlen = skb_shinfo(skb)->nr_frags == 0 ? - max_t(unsigned int, skb->len, ETH_ZLEN) : - skb_headlen(skb); - - spin_lock_irqsave(&vptr->lock, flags); - - index = vptr->tx.curr[qnum]; - td_ptr = &(vptr->tx.rings[qnum][index]); - tdinfo = &(vptr->tx.infos[qnum][index]); - - td_ptr->tdesc1.TCR = TCR0_TIC; - td_ptr->td_buf[0].size &= ~TD_QUEUE; - - /* - * Map the linear network buffer into PCI space and - * add it to the transmit ring. - */ - tdinfo->skb = skb; - tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE); - td_ptr->tdesc0.len = cpu_to_le16(pktlen); - td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); - td_ptr->td_buf[0].pa_high = 0; - td_ptr->td_buf[0].size = cpu_to_le16(pktlen); - - /* Handle fragments */ - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - - tdinfo->skb_dma[i + 1] = pci_map_page(vptr->pdev, frag->page, - frag->page_offset, frag->size, - PCI_DMA_TODEVICE); - - td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]); - td_ptr->td_buf[i + 1].pa_high = 0; - td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size); - } - tdinfo->nskb_dma = i + 1; - - td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16; - - if (vlan_tx_tag_present(skb)) { - td_ptr->tdesc1.vlan = cpu_to_le16(vlan_tx_tag_get(skb)); - td_ptr->tdesc1.TCR |= TCR0_VETAG; - } - - /* - * Handle hardware checksum - */ - if (skb->ip_summed == CHECKSUM_PARTIAL) { - const struct iphdr *ip = ip_hdr(skb); - if (ip->protocol == IPPROTO_TCP) - td_ptr->tdesc1.TCR |= TCR0_TCPCK; - else if (ip->protocol == IPPROTO_UDP) - td_ptr->tdesc1.TCR |= (TCR0_UDPCK); - td_ptr->tdesc1.TCR |= TCR0_IPCK; - } - - prev = index - 1; - if (prev < 0) - prev = vptr->options.numtx - 1; - td_ptr->tdesc0.len |= OWNED_BY_NIC; - vptr->tx.used[qnum]++; - vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx; - - if (AVAIL_TD(vptr, qnum) < 1) - netif_stop_queue(dev); - - td_ptr = &(vptr->tx.rings[qnum][prev]); - td_ptr->td_buf[0].size |= TD_QUEUE; - mac_tx_queue_wake(vptr->mac_regs, qnum); - - spin_unlock_irqrestore(&vptr->lock, flags); -out: - return NETDEV_TX_OK; -} - -static const struct net_device_ops velocity_netdev_ops = { - .ndo_open = velocity_open, - .ndo_stop = velocity_close, - .ndo_start_xmit = velocity_xmit, - .ndo_get_stats = velocity_get_stats, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_set_multicast_list = velocity_set_multi, - .ndo_change_mtu = velocity_change_mtu, - .ndo_do_ioctl = velocity_ioctl, - .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid, -}; - -/** - * velocity_init_info - init private data - * @pdev: PCI device - * @vptr: Velocity info - * @info: Board type - * - * Set up the initial velocity_info struct for the device that has been - * discovered. - */ -static void __devinit velocity_init_info(struct pci_dev *pdev, - struct velocity_info *vptr, - const struct velocity_info_tbl *info) -{ - memset(vptr, 0, sizeof(struct velocity_info)); - - vptr->pdev = pdev; - vptr->chip_id = info->chip_id; - vptr->tx.numq = info->txqueue; - vptr->multicast_limit = MCAM_SIZE; - spin_lock_init(&vptr->lock); -} - -/** - * velocity_get_pci_info - retrieve PCI info for device - * @vptr: velocity device - * @pdev: PCI device it matches - * - * Retrieve the PCI configuration space data that interests us from - * the kernel PCI layer - */ -static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) -{ - vptr->rev_id = pdev->revision; - - pci_set_master(pdev); - - vptr->ioaddr = pci_resource_start(pdev, 0); - vptr->memaddr = pci_resource_start(pdev, 1); - - if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { - dev_err(&pdev->dev, - "region #0 is not an I/O resource, aborting.\n"); - return -EINVAL; - } - - if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) { - dev_err(&pdev->dev, - "region #1 is an I/O resource, aborting.\n"); - return -EINVAL; - } - - if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) { - dev_err(&pdev->dev, "region #1 is too small.\n"); - return -EINVAL; - } - vptr->pdev = pdev; - - return 0; -} - -/** - * velocity_print_info - per driver data - * @vptr: velocity - * - * Print per driver data as the kernel driver finds Velocity - * hardware - */ -static void __devinit velocity_print_info(struct velocity_info *vptr) -{ - struct net_device *dev = vptr->dev; - - printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id)); - printk(KERN_INFO "%s: Ethernet Address: %pM\n", - dev->name, dev->dev_addr); -} - -static u32 velocity_get_link(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - struct mac_regs __iomem *regs = vptr->mac_regs; - return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0; -} - -/** - * velocity_found1 - set up discovered velocity card - * @pdev: PCI device - * @ent: PCI device table entry that matched - * - * Configure a discovered adapter from scratch. Return a negative - * errno error code on failure paths. - */ -static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int first = 1; - struct net_device *dev; - int i; - const char *drv_string; - const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; - struct velocity_info *vptr; - struct mac_regs __iomem *regs; - int ret = -ENOMEM; - - /* FIXME: this driver, like almost all other ethernet drivers, - * can support more than MAX_UNITS. - */ - if (velocity_nics >= MAX_UNITS) { - dev_notice(&pdev->dev, "already found %d NICs.\n", - velocity_nics); - return -ENODEV; - } - - dev = alloc_etherdev(sizeof(struct velocity_info)); - if (!dev) { - dev_err(&pdev->dev, "allocate net device failed.\n"); - goto out; - } - - /* Chain it all together */ - - SET_NETDEV_DEV(dev, &pdev->dev); - vptr = netdev_priv(dev); - - - if (first) { - printk(KERN_INFO "%s Ver. %s\n", - VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION); - printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n"); - printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n"); - first = 0; - } - - velocity_init_info(pdev, vptr, info); - - vptr->dev = dev; - - ret = pci_enable_device(pdev); - if (ret < 0) - goto err_free_dev; - - dev->irq = pdev->irq; - - ret = velocity_get_pci_info(vptr, pdev); - if (ret < 0) { - /* error message already printed */ - goto err_disable; - } - - ret = pci_request_regions(pdev, VELOCITY_NAME); - if (ret < 0) { - dev_err(&pdev->dev, "No PCI resources.\n"); - goto err_disable; - } - - regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE); - if (regs == NULL) { - ret = -EIO; - goto err_release_res; - } - - vptr->mac_regs = regs; - - mac_wol_reset(regs); - - dev->base_addr = vptr->ioaddr; - - for (i = 0; i < 6; i++) - dev->dev_addr[i] = readb(®s->PAR[i]); - - - drv_string = dev_driver_string(&pdev->dev); - - velocity_get_options(&vptr->options, velocity_nics, drv_string); - - /* - * Mask out the options cannot be set to the chip - */ - - vptr->options.flags &= info->flags; - - /* - * Enable the chip specified capbilities - */ - - vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL); - - vptr->wol_opts = vptr->options.wol_opts; - vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; - - vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs); - - dev->irq = pdev->irq; - dev->netdev_ops = &velocity_netdev_ops; - dev->ethtool_ops = &velocity_ethtool_ops; - netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT); - - dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HW_VLAN_TX; - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | - NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM; - - ret = register_netdev(dev); - if (ret < 0) - goto err_iounmap; - - if (!velocity_get_link(dev)) { - netif_carrier_off(dev); - vptr->mii_status |= VELOCITY_LINK_FAIL; - } - - velocity_print_info(vptr); - pci_set_drvdata(pdev, dev); - - /* and leave the chip powered down */ - - pci_set_power_state(pdev, PCI_D3hot); - velocity_nics++; -out: - return ret; - -err_iounmap: - iounmap(regs); -err_release_res: - pci_release_regions(pdev); -err_disable: - pci_disable_device(pdev); -err_free_dev: - free_netdev(dev); - goto out; -} - -#ifdef CONFIG_PM -/** - * wol_calc_crc - WOL CRC - * @pattern: data pattern - * @mask_pattern: mask - * - * Compute the wake on lan crc hashes for the packet header - * we are interested in. - */ -static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern) -{ - u16 crc = 0xFFFF; - u8 mask; - int i, j; - - for (i = 0; i < size; i++) { - mask = mask_pattern[i]; - - /* Skip this loop if the mask equals to zero */ - if (mask == 0x00) - continue; - - for (j = 0; j < 8; j++) { - if ((mask & 0x01) == 0) { - mask >>= 1; - continue; - } - mask >>= 1; - crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1); - } - } - /* Finally, invert the result once to get the correct data */ - crc = ~crc; - return bitrev32(crc) >> 16; -} - -/** - * velocity_set_wol - set up for wake on lan - * @vptr: velocity to set WOL status on - * - * Set a card up for wake on lan either by unicast or by - * ARP packet. - * - * FIXME: check static buffer is safe here - */ -static int velocity_set_wol(struct velocity_info *vptr) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - enum speed_opt spd_dpx = vptr->options.spd_dpx; - static u8 buf[256]; - int i; - - static u32 mask_pattern[2][4] = { - {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */ - {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */ - }; - - writew(0xFFFF, ®s->WOLCRClr); - writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet); - writew(WOLCR_MAGIC_EN, ®s->WOLCRSet); - - /* - if (vptr->wol_opts & VELOCITY_WOL_PHY) - writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet); - */ - - if (vptr->wol_opts & VELOCITY_WOL_UCAST) - writew(WOLCR_UNICAST_EN, ®s->WOLCRSet); - - if (vptr->wol_opts & VELOCITY_WOL_ARP) { - struct arp_packet *arp = (struct arp_packet *) buf; - u16 crc; - memset(buf, 0, sizeof(struct arp_packet) + 7); - - for (i = 0; i < 4; i++) - writel(mask_pattern[0][i], ®s->ByteMask[0][i]); - - arp->type = htons(ETH_P_ARP); - arp->ar_op = htons(1); - - memcpy(arp->ar_tip, vptr->ip_addr, 4); - - crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf, - (u8 *) & mask_pattern[0][0]); - - writew(crc, ®s->PatternCRC[0]); - writew(WOLCR_ARP_EN, ®s->WOLCRSet); - } - - BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet); - BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet); - - writew(0x0FFF, ®s->WOLSRClr); - - if (spd_dpx == SPD_DPX_1000_FULL) - goto mac_done; - - if (spd_dpx != SPD_DPX_AUTO) - goto advertise_done; - - if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) { - if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) - MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs); - - MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs); - } - - if (vptr->mii_status & VELOCITY_SPEED_1000) - MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs); - -advertise_done: - BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR); - - { - u8 GCR; - GCR = readb(®s->CHIPGCR); - GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX; - writeb(GCR, ®s->CHIPGCR); - } - -mac_done: - BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR); - /* Turn on SWPTAG just before entering power mode */ - BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW); - /* Go to bed ..... */ - BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW); - - return 0; -} - -/** - * velocity_save_context - save registers - * @vptr: velocity - * @context: buffer for stored context - * - * Retrieve the current configuration from the velocity hardware - * and stash it in the context structure, for use by the context - * restore functions. This allows us to save things we need across - * power down states - */ -static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - u16 i; - u8 __iomem *ptr = (u8 __iomem *)regs; - - for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4) - *((u32 *) (context->mac_reg + i)) = readl(ptr + i); - - for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4) - *((u32 *) (context->mac_reg + i)) = readl(ptr + i); - - for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) - *((u32 *) (context->mac_reg + i)) = readl(ptr + i); - -} - -static int velocity_suspend(struct pci_dev *pdev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct velocity_info *vptr = netdev_priv(dev); - unsigned long flags; - - if (!netif_running(vptr->dev)) - return 0; - - netif_device_detach(vptr->dev); - - spin_lock_irqsave(&vptr->lock, flags); - pci_save_state(pdev); - - if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) { - velocity_get_ip(vptr); - velocity_save_context(vptr, &vptr->context); - velocity_shutdown(vptr); - velocity_set_wol(vptr); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_set_power_state(pdev, PCI_D3hot); - } else { - velocity_save_context(vptr, &vptr->context); - velocity_shutdown(vptr); - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); - } - - spin_unlock_irqrestore(&vptr->lock, flags); - return 0; -} - -/** - * velocity_restore_context - restore registers - * @vptr: velocity - * @context: buffer for stored context - * - * Reload the register configuration from the velocity context - * created by velocity_save_context. - */ -static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context) -{ - struct mac_regs __iomem *regs = vptr->mac_regs; - int i; - u8 __iomem *ptr = (u8 __iomem *)regs; - - for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4) - writel(*((u32 *) (context->mac_reg + i)), ptr + i); - - /* Just skip cr0 */ - for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) { - /* Clear */ - writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4); - /* Set */ - writeb(*((u8 *) (context->mac_reg + i)), ptr + i); - } - - for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4) - writel(*((u32 *) (context->mac_reg + i)), ptr + i); - - for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) - writel(*((u32 *) (context->mac_reg + i)), ptr + i); - - for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++) - writeb(*((u8 *) (context->mac_reg + i)), ptr + i); -} - -static int velocity_resume(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct velocity_info *vptr = netdev_priv(dev); - unsigned long flags; - int i; - - if (!netif_running(vptr->dev)) - return 0; - - pci_set_power_state(pdev, PCI_D0); - pci_enable_wake(pdev, 0, 0); - pci_restore_state(pdev); - - mac_wol_reset(vptr->mac_regs); - - spin_lock_irqsave(&vptr->lock, flags); - velocity_restore_context(vptr, &vptr->context); - velocity_init_registers(vptr, VELOCITY_INIT_WOL); - mac_disable_int(vptr->mac_regs); - - velocity_tx_srv(vptr); - - for (i = 0; i < vptr->tx.numq; i++) { - if (vptr->tx.used[i]) - mac_tx_queue_wake(vptr->mac_regs, i); - } - - mac_enable_int(vptr->mac_regs); - spin_unlock_irqrestore(&vptr->lock, flags); - netif_device_attach(vptr->dev); - - return 0; -} -#endif - -/* - * Definition for our device driver. The PCI layer interface - * uses this to handle all our card discover and plugging - */ -static struct pci_driver velocity_driver = { - .name = VELOCITY_NAME, - .id_table = velocity_id_table, - .probe = velocity_found1, - .remove = __devexit_p(velocity_remove1), -#ifdef CONFIG_PM - .suspend = velocity_suspend, - .resume = velocity_resume, -#endif -}; - - -/** - * velocity_ethtool_up - pre hook for ethtool - * @dev: network device - * - * Called before an ethtool operation. We need to make sure the - * chip is out of D3 state before we poke at it. - */ -static int velocity_ethtool_up(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - if (!netif_running(dev)) - pci_set_power_state(vptr->pdev, PCI_D0); - return 0; -} - -/** - * velocity_ethtool_down - post hook for ethtool - * @dev: network device - * - * Called after an ethtool operation. Restore the chip back to D3 - * state if it isn't running. - */ -static void velocity_ethtool_down(struct net_device *dev) -{ - struct velocity_info *vptr = netdev_priv(dev); - if (!netif_running(dev)) - pci_set_power_state(vptr->pdev, PCI_D3hot); -} - -static int velocity_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - struct mac_regs __iomem *regs = vptr->mac_regs; - u32 status; - status = check_connection_type(vptr->mac_regs); - - cmd->supported = SUPPORTED_TP | - SUPPORTED_Autoneg | - SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full; - - cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg; - if (vptr->options.spd_dpx == SPD_DPX_AUTO) { - cmd->advertising |= - ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full; - } else { - switch (vptr->options.spd_dpx) { - case SPD_DPX_1000_FULL: - cmd->advertising |= ADVERTISED_1000baseT_Full; - break; - case SPD_DPX_100_HALF: - cmd->advertising |= ADVERTISED_100baseT_Half; - break; - case SPD_DPX_100_FULL: - cmd->advertising |= ADVERTISED_100baseT_Full; - break; - case SPD_DPX_10_HALF: - cmd->advertising |= ADVERTISED_10baseT_Half; - break; - case SPD_DPX_10_FULL: - cmd->advertising |= ADVERTISED_10baseT_Full; - break; - default: - break; - } - } - - if (status & VELOCITY_SPEED_1000) - ethtool_cmd_speed_set(cmd, SPEED_1000); - else if (status & VELOCITY_SPEED_100) - ethtool_cmd_speed_set(cmd, SPEED_100); - else - ethtool_cmd_speed_set(cmd, SPEED_10); - - cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE; - cmd->port = PORT_TP; - cmd->transceiver = XCVR_INTERNAL; - cmd->phy_address = readb(®s->MIIADR) & 0x1F; - - if (status & VELOCITY_DUPLEX_FULL) - cmd->duplex = DUPLEX_FULL; - else - cmd->duplex = DUPLEX_HALF; - - return 0; -} - -static int velocity_set_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - u32 speed = ethtool_cmd_speed(cmd); - u32 curr_status; - u32 new_status = 0; - int ret = 0; - - curr_status = check_connection_type(vptr->mac_regs); - curr_status &= (~VELOCITY_LINK_FAIL); - - new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0); - new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0); - new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0); - new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0); - new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0); - - if ((new_status & VELOCITY_AUTONEG_ENABLE) && - (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) { - ret = -EINVAL; - } else { - enum speed_opt spd_dpx; - - if (new_status & VELOCITY_AUTONEG_ENABLE) - spd_dpx = SPD_DPX_AUTO; - else if ((new_status & VELOCITY_SPEED_1000) && - (new_status & VELOCITY_DUPLEX_FULL)) { - spd_dpx = SPD_DPX_1000_FULL; - } else if (new_status & VELOCITY_SPEED_100) - spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ? - SPD_DPX_100_FULL : SPD_DPX_100_HALF; - else if (new_status & VELOCITY_SPEED_10) - spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ? - SPD_DPX_10_FULL : SPD_DPX_10_HALF; - else - return -EOPNOTSUPP; - - vptr->options.spd_dpx = spd_dpx; - - velocity_set_media_mode(vptr, new_status); - } - - return ret; -} - -static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct velocity_info *vptr = netdev_priv(dev); - strcpy(info->driver, VELOCITY_NAME); - strcpy(info->version, VELOCITY_VERSION); - strcpy(info->bus_info, pci_name(vptr->pdev)); -} - -static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct velocity_info *vptr = netdev_priv(dev); - wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP; - wol->wolopts |= WAKE_MAGIC; - /* - if (vptr->wol_opts & VELOCITY_WOL_PHY) - wol.wolopts|=WAKE_PHY; - */ - if (vptr->wol_opts & VELOCITY_WOL_UCAST) - wol->wolopts |= WAKE_UCAST; - if (vptr->wol_opts & VELOCITY_WOL_ARP) - wol->wolopts |= WAKE_ARP; - memcpy(&wol->sopass, vptr->wol_passwd, 6); -} - -static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) -{ - struct velocity_info *vptr = netdev_priv(dev); - - if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP))) - return -EFAULT; - vptr->wol_opts = VELOCITY_WOL_MAGIC; - - /* - if (wol.wolopts & WAKE_PHY) { - vptr->wol_opts|=VELOCITY_WOL_PHY; - vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED; - } - */ - - if (wol->wolopts & WAKE_MAGIC) { - vptr->wol_opts |= VELOCITY_WOL_MAGIC; - vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; - } - if (wol->wolopts & WAKE_UCAST) { - vptr->wol_opts |= VELOCITY_WOL_UCAST; - vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; - } - if (wol->wolopts & WAKE_ARP) { - vptr->wol_opts |= VELOCITY_WOL_ARP; - vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED; - } - memcpy(vptr->wol_passwd, wol->sopass, 6); - return 0; -} - -static u32 velocity_get_msglevel(struct net_device *dev) -{ - return msglevel; -} - -static void velocity_set_msglevel(struct net_device *dev, u32 value) -{ - msglevel = value; -} - -static int get_pending_timer_val(int val) -{ - int mult_bits = val >> 6; - int mult = 1; - - switch (mult_bits) - { - case 1: - mult = 4; break; - case 2: - mult = 16; break; - case 3: - mult = 64; break; - case 0: - default: - break; - } - - return (val & 0x3f) * mult; -} - -static void set_pending_timer_val(int *val, u32 us) -{ - u8 mult = 0; - u8 shift = 0; - - if (us >= 0x3f) { - mult = 1; /* mult with 4 */ - shift = 2; - } - if (us >= 0x3f * 4) { - mult = 2; /* mult with 16 */ - shift = 4; - } - if (us >= 0x3f * 16) { - mult = 3; /* mult with 64 */ - shift = 6; - } - - *val = (mult << 6) | ((us >> shift) & 0x3f); -} - - -static int velocity_get_coalesce(struct net_device *dev, - struct ethtool_coalesce *ecmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - - ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup; - ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup; - - ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer); - ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer); - - return 0; -} - -static int velocity_set_coalesce(struct net_device *dev, - struct ethtool_coalesce *ecmd) -{ - struct velocity_info *vptr = netdev_priv(dev); - int max_us = 0x3f * 64; - unsigned long flags; - - /* 6 bits of */ - if (ecmd->tx_coalesce_usecs > max_us) - return -EINVAL; - if (ecmd->rx_coalesce_usecs > max_us) - return -EINVAL; - - if (ecmd->tx_max_coalesced_frames > 0xff) - return -EINVAL; - if (ecmd->rx_max_coalesced_frames > 0xff) - return -EINVAL; - - vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames; - vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames; - - set_pending_timer_val(&vptr->options.rxqueue_timer, - ecmd->rx_coalesce_usecs); - set_pending_timer_val(&vptr->options.txqueue_timer, - ecmd->tx_coalesce_usecs); - - /* Setup the interrupt suppression and queue timers */ - spin_lock_irqsave(&vptr->lock, flags); - mac_disable_int(vptr->mac_regs); - setup_adaptive_interrupts(vptr); - setup_queue_timers(vptr); - - mac_write_int_mask(vptr->int_mask, vptr->mac_regs); - mac_clear_isr(vptr->mac_regs); - mac_enable_int(vptr->mac_regs); - spin_unlock_irqrestore(&vptr->lock, flags); - - return 0; -} - -static const char velocity_gstrings[][ETH_GSTRING_LEN] = { - "rx_all", - "rx_ok", - "tx_ok", - "rx_error", - "rx_runt_ok", - "rx_runt_err", - "rx_64", - "tx_64", - "rx_65_to_127", - "tx_65_to_127", - "rx_128_to_255", - "tx_128_to_255", - "rx_256_to_511", - "tx_256_to_511", - "rx_512_to_1023", - "tx_512_to_1023", - "rx_1024_to_1518", - "tx_1024_to_1518", - "tx_ether_collisions", - "rx_crc_errors", - "rx_jumbo", - "tx_jumbo", - "rx_mac_control_frames", - "tx_mac_control_frames", - "rx_frame_alignement_errors", - "rx_long_ok", - "rx_long_err", - "tx_sqe_errors", - "rx_no_buf", - "rx_symbol_errors", - "in_range_length_errors", - "late_collisions" -}; - -static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data) -{ - switch (sset) { - case ETH_SS_STATS: - memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings)); - break; - } -} - -static int velocity_get_sset_count(struct net_device *dev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(velocity_gstrings); - default: - return -EOPNOTSUPP; - } -} - -static void velocity_get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *stats, u64 *data) -{ - if (netif_running(dev)) { - struct velocity_info *vptr = netdev_priv(dev); - u32 *p = vptr->mib_counter; - int i; - - spin_lock_irq(&vptr->lock); - velocity_update_hw_mibs(vptr); - spin_unlock_irq(&vptr->lock); - - for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++) - *data++ = *p++; - } -} - -static const struct ethtool_ops velocity_ethtool_ops = { - .get_settings = velocity_get_settings, - .set_settings = velocity_set_settings, - .get_drvinfo = velocity_get_drvinfo, - .get_wol = velocity_ethtool_get_wol, - .set_wol = velocity_ethtool_set_wol, - .get_msglevel = velocity_get_msglevel, - .set_msglevel = velocity_set_msglevel, - .get_link = velocity_get_link, - .get_strings = velocity_get_strings, - .get_sset_count = velocity_get_sset_count, - .get_ethtool_stats = velocity_get_ethtool_stats, - .get_coalesce = velocity_get_coalesce, - .set_coalesce = velocity_set_coalesce, - .begin = velocity_ethtool_up, - .complete = velocity_ethtool_down -}; - -#if defined(CONFIG_PM) && defined(CONFIG_INET) -static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr) -{ - struct in_ifaddr *ifa = ptr; - struct net_device *dev = ifa->ifa_dev->dev; - - if (dev_net(dev) == &init_net && - dev->netdev_ops == &velocity_netdev_ops) - velocity_get_ip(netdev_priv(dev)); - - return NOTIFY_DONE; -} - -static struct notifier_block velocity_inetaddr_notifier = { - .notifier_call = velocity_netdev_event, -}; - -static void velocity_register_notifier(void) -{ - register_inetaddr_notifier(&velocity_inetaddr_notifier); -} - -static void velocity_unregister_notifier(void) -{ - unregister_inetaddr_notifier(&velocity_inetaddr_notifier); -} - -#else - -#define velocity_register_notifier() do {} while (0) -#define velocity_unregister_notifier() do {} while (0) - -#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */ - -/** - * velocity_init_module - load time function - * - * Called when the velocity module is loaded. The PCI driver - * is registered with the PCI layer, and in turn will call - * the probe functions for each velocity adapter installed - * in the system. - */ -static int __init velocity_init_module(void) -{ - int ret; - - velocity_register_notifier(); - ret = pci_register_driver(&velocity_driver); - if (ret < 0) - velocity_unregister_notifier(); - return ret; -} - -/** - * velocity_cleanup - module unload - * - * When the velocity hardware is unloaded this function is called. - * It will clean up the notifiers and the unregister the PCI - * driver interface for this hardware. This in turn cleans up - * all discovered interfaces before returning from the function - */ -static void __exit velocity_cleanup_module(void) -{ - velocity_unregister_notifier(); - pci_unregister_driver(&velocity_driver); -} - -module_init(velocity_init_module); -module_exit(velocity_cleanup_module); diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h deleted file mode 100644 index 4cb9f13485e9..000000000000 --- a/drivers/net/via-velocity.h +++ /dev/null @@ -1,1579 +0,0 @@ -/* - * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. - * All rights reserved. - * - * This software may be redistributed and/or modified under - * the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or - * any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY - * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * File: via-velocity.h - * - * Purpose: Header file to define driver's private structures. - * - * Author: Chuang Liang-Shing, AJ Jiang - * - * Date: Jan 24, 2003 - */ - - -#ifndef VELOCITY_H -#define VELOCITY_H - -#define VELOCITY_TX_CSUM_SUPPORT - -#define VELOCITY_NAME "via-velocity" -#define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver" -#define VELOCITY_VERSION "1.15" - -#define VELOCITY_IO_SIZE 256 -#define VELOCITY_NAPI_WEIGHT 64 - -#define PKT_BUF_SZ 1540 - -#define MAX_UNITS 8 -#define OPTION_DEFAULT { [0 ... MAX_UNITS-1] = -1} - -#define REV_ID_VT6110 (0) - -#define BYTE_REG_BITS_ON(x,p) do { writeb(readb((p))|(x),(p));} while (0) -#define WORD_REG_BITS_ON(x,p) do { writew(readw((p))|(x),(p));} while (0) -#define DWORD_REG_BITS_ON(x,p) do { writel(readl((p))|(x),(p));} while (0) - -#define BYTE_REG_BITS_IS_ON(x,p) (readb((p)) & (x)) -#define WORD_REG_BITS_IS_ON(x,p) (readw((p)) & (x)) -#define DWORD_REG_BITS_IS_ON(x,p) (readl((p)) & (x)) - -#define BYTE_REG_BITS_OFF(x,p) do { writeb(readb((p)) & (~(x)),(p));} while (0) -#define WORD_REG_BITS_OFF(x,p) do { writew(readw((p)) & (~(x)),(p));} while (0) -#define DWORD_REG_BITS_OFF(x,p) do { writel(readl((p)) & (~(x)),(p));} while (0) - -#define BYTE_REG_BITS_SET(x,m,p) do { writeb( (readb((p)) & (~(m))) |(x),(p));} while (0) -#define WORD_REG_BITS_SET(x,m,p) do { writew( (readw((p)) & (~(m))) |(x),(p));} while (0) -#define DWORD_REG_BITS_SET(x,m,p) do { writel( (readl((p)) & (~(m)))|(x),(p));} while (0) - -#define VAR_USED(p) do {(p)=(p);} while (0) - -/* - * Purpose: Structures for MAX RX/TX descriptors. - */ - - -#define B_OWNED_BY_CHIP 1 -#define B_OWNED_BY_HOST 0 - -/* - * Bits in the RSR0 register - */ - -#define RSR_DETAG cpu_to_le16(0x0080) -#define RSR_SNTAG cpu_to_le16(0x0040) -#define RSR_RXER cpu_to_le16(0x0020) -#define RSR_RL cpu_to_le16(0x0010) -#define RSR_CE cpu_to_le16(0x0008) -#define RSR_FAE cpu_to_le16(0x0004) -#define RSR_CRC cpu_to_le16(0x0002) -#define RSR_VIDM cpu_to_le16(0x0001) - -/* - * Bits in the RSR1 register - */ - -#define RSR_RXOK cpu_to_le16(0x8000) // rx OK -#define RSR_PFT cpu_to_le16(0x4000) // Perfect filtering address match -#define RSR_MAR cpu_to_le16(0x2000) // MAC accept multicast address packet -#define RSR_BAR cpu_to_le16(0x1000) // MAC accept broadcast address packet -#define RSR_PHY cpu_to_le16(0x0800) // MAC accept physical address packet -#define RSR_VTAG cpu_to_le16(0x0400) // 802.1p/1q tagging packet indicator -#define RSR_STP cpu_to_le16(0x0200) // start of packet -#define RSR_EDP cpu_to_le16(0x0100) // end of packet - -/* - * Bits in the CSM register - */ - -#define CSM_IPOK 0x40 //IP Checksum validation ok -#define CSM_TUPOK 0x20 //TCP/UDP Checksum validation ok -#define CSM_FRAG 0x10 //Fragment IP datagram -#define CSM_IPKT 0x04 //Received an IP packet -#define CSM_TCPKT 0x02 //Received a TCP packet -#define CSM_UDPKT 0x01 //Received a UDP packet - -/* - * Bits in the TSR0 register - */ - -#define TSR0_ABT cpu_to_le16(0x0080) // Tx abort because of excessive collision -#define TSR0_OWT cpu_to_le16(0x0040) // Jumbo frame Tx abort -#define TSR0_OWC cpu_to_le16(0x0020) // Out of window collision -#define TSR0_COLS cpu_to_le16(0x0010) // experience collision in this transmit event -#define TSR0_NCR3 cpu_to_le16(0x0008) // collision retry counter[3] -#define TSR0_NCR2 cpu_to_le16(0x0004) // collision retry counter[2] -#define TSR0_NCR1 cpu_to_le16(0x0002) // collision retry counter[1] -#define TSR0_NCR0 cpu_to_le16(0x0001) // collision retry counter[0] -#define TSR0_TERR cpu_to_le16(0x8000) // -#define TSR0_FDX cpu_to_le16(0x4000) // current transaction is serviced by full duplex mode -#define TSR0_GMII cpu_to_le16(0x2000) // current transaction is serviced by GMII mode -#define TSR0_LNKFL cpu_to_le16(0x1000) // packet serviced during link down -#define TSR0_SHDN cpu_to_le16(0x0400) // shutdown case -#define TSR0_CRS cpu_to_le16(0x0200) // carrier sense lost -#define TSR0_CDH cpu_to_le16(0x0100) // AQE test fail (CD heartbeat) - -// -// Bits in the TCR0 register -// -#define TCR0_TIC 0x80 // assert interrupt immediately while descriptor has been send complete -#define TCR0_PIC 0x40 // priority interrupt request, INA# is issued over adaptive interrupt scheme -#define TCR0_VETAG 0x20 // enable VLAN tag -#define TCR0_IPCK 0x10 // request IP checksum calculation. -#define TCR0_UDPCK 0x08 // request UDP checksum calculation. -#define TCR0_TCPCK 0x04 // request TCP checksum calculation. -#define TCR0_JMBO 0x02 // indicate a jumbo packet in GMAC side -#define TCR0_CRC 0x01 // disable CRC generation - -#define TCPLS_NORMAL 3 -#define TCPLS_START 2 -#define TCPLS_END 1 -#define TCPLS_MED 0 - - -// max transmit or receive buffer size -#define CB_RX_BUF_SIZE 2048UL // max buffer size - // NOTE: must be multiple of 4 - -#define CB_MAX_RD_NUM 512 // MAX # of RD -#define CB_MAX_TD_NUM 256 // MAX # of TD - -#define CB_INIT_RD_NUM_3119 128 // init # of RD, for setup VT3119 -#define CB_INIT_TD_NUM_3119 64 // init # of TD, for setup VT3119 - -#define CB_INIT_RD_NUM 128 // init # of RD, for setup default -#define CB_INIT_TD_NUM 64 // init # of TD, for setup default - -// for 3119 -#define CB_TD_RING_NUM 4 // # of TD rings. -#define CB_MAX_SEG_PER_PKT 7 // max data seg per packet (Tx) - - -/* - * If collisions excess 15 times , tx will abort, and - * if tx fifo underflow, tx will fail - * we should try to resend it - */ - -#define CB_MAX_TX_ABORT_RETRY 3 - -/* - * Receive descriptor - */ - -struct rdesc0 { - __le16 RSR; /* Receive status */ - __le16 len; /* bits 0--13; bit 15 - owner */ -}; - -struct rdesc1 { - __le16 PQTAG; - u8 CSM; - u8 IPKT; -}; - -enum { - RX_INTEN = cpu_to_le16(0x8000) -}; - -struct rx_desc { - struct rdesc0 rdesc0; - struct rdesc1 rdesc1; - __le32 pa_low; /* Low 32 bit PCI address */ - __le16 pa_high; /* Next 16 bit PCI address (48 total) */ - __le16 size; /* bits 0--14 - frame size, bit 15 - enable int. */ -} __packed; - -/* - * Transmit descriptor - */ - -struct tdesc0 { - __le16 TSR; /* Transmit status register */ - __le16 len; /* bits 0--13 - size of frame, bit 15 - owner */ -}; - -struct tdesc1 { - __le16 vlan; - u8 TCR; - u8 cmd; /* bits 0--1 - TCPLS, bits 4--7 - CMDZ */ -} __packed; - -enum { - TD_QUEUE = cpu_to_le16(0x8000) -}; - -struct td_buf { - __le32 pa_low; - __le16 pa_high; - __le16 size; /* bits 0--13 - size, bit 15 - queue */ -} __packed; - -struct tx_desc { - struct tdesc0 tdesc0; - struct tdesc1 tdesc1; - struct td_buf td_buf[7]; -}; - -struct velocity_rd_info { - struct sk_buff *skb; - dma_addr_t skb_dma; -}; - -/* - * Used to track transmit side buffers. - */ - -struct velocity_td_info { - struct sk_buff *skb; - int nskb_dma; - dma_addr_t skb_dma[7]; -}; - -enum velocity_owner { - OWNED_BY_HOST = 0, - OWNED_BY_NIC = cpu_to_le16(0x8000) -}; - - -/* - * MAC registers and macros. - */ - - -#define MCAM_SIZE 64 -#define VCAM_SIZE 64 -#define TX_QUEUE_NO 4 - -#define MAX_HW_MIB_COUNTER 32 -#define VELOCITY_MIN_MTU (64) -#define VELOCITY_MAX_MTU (9000) - -/* - * Registers in the MAC - */ - -#define MAC_REG_PAR 0x00 // physical address -#define MAC_REG_RCR 0x06 -#define MAC_REG_TCR 0x07 -#define MAC_REG_CR0_SET 0x08 -#define MAC_REG_CR1_SET 0x09 -#define MAC_REG_CR2_SET 0x0A -#define MAC_REG_CR3_SET 0x0B -#define MAC_REG_CR0_CLR 0x0C -#define MAC_REG_CR1_CLR 0x0D -#define MAC_REG_CR2_CLR 0x0E -#define MAC_REG_CR3_CLR 0x0F -#define MAC_REG_MAR 0x10 -#define MAC_REG_CAM 0x10 -#define MAC_REG_DEC_BASE_HI 0x18 -#define MAC_REG_DBF_BASE_HI 0x1C -#define MAC_REG_ISR_CTL 0x20 -#define MAC_REG_ISR_HOTMR 0x20 -#define MAC_REG_ISR_TSUPTHR 0x20 -#define MAC_REG_ISR_RSUPTHR 0x20 -#define MAC_REG_ISR_CTL1 0x21 -#define MAC_REG_TXE_SR 0x22 -#define MAC_REG_RXE_SR 0x23 -#define MAC_REG_ISR 0x24 -#define MAC_REG_ISR0 0x24 -#define MAC_REG_ISR1 0x25 -#define MAC_REG_ISR2 0x26 -#define MAC_REG_ISR3 0x27 -#define MAC_REG_IMR 0x28 -#define MAC_REG_IMR0 0x28 -#define MAC_REG_IMR1 0x29 -#define MAC_REG_IMR2 0x2A -#define MAC_REG_IMR3 0x2B -#define MAC_REG_TDCSR_SET 0x30 -#define MAC_REG_RDCSR_SET 0x32 -#define MAC_REG_TDCSR_CLR 0x34 -#define MAC_REG_RDCSR_CLR 0x36 -#define MAC_REG_RDBASE_LO 0x38 -#define MAC_REG_RDINDX 0x3C -#define MAC_REG_TDBASE_LO 0x40 -#define MAC_REG_RDCSIZE 0x50 -#define MAC_REG_TDCSIZE 0x52 -#define MAC_REG_TDINDX 0x54 -#define MAC_REG_TDIDX0 0x54 -#define MAC_REG_TDIDX1 0x56 -#define MAC_REG_TDIDX2 0x58 -#define MAC_REG_TDIDX3 0x5A -#define MAC_REG_PAUSE_TIMER 0x5C -#define MAC_REG_RBRDU 0x5E -#define MAC_REG_FIFO_TEST0 0x60 -#define MAC_REG_FIFO_TEST1 0x64 -#define MAC_REG_CAMADDR 0x68 -#define MAC_REG_CAMCR 0x69 -#define MAC_REG_GFTEST 0x6A -#define MAC_REG_FTSTCMD 0x6B -#define MAC_REG_MIICFG 0x6C -#define MAC_REG_MIISR 0x6D -#define MAC_REG_PHYSR0 0x6E -#define MAC_REG_PHYSR1 0x6F -#define MAC_REG_MIICR 0x70 -#define MAC_REG_MIIADR 0x71 -#define MAC_REG_MIIDATA 0x72 -#define MAC_REG_SOFT_TIMER0 0x74 -#define MAC_REG_SOFT_TIMER1 0x76 -#define MAC_REG_CFGA 0x78 -#define MAC_REG_CFGB 0x79 -#define MAC_REG_CFGC 0x7A -#define MAC_REG_CFGD 0x7B -#define MAC_REG_DCFG0 0x7C -#define MAC_REG_DCFG1 0x7D -#define MAC_REG_MCFG0 0x7E -#define MAC_REG_MCFG1 0x7F - -#define MAC_REG_TBIST 0x80 -#define MAC_REG_RBIST 0x81 -#define MAC_REG_PMCC 0x82 -#define MAC_REG_STICKHW 0x83 -#define MAC_REG_MIBCR 0x84 -#define MAC_REG_EERSV 0x85 -#define MAC_REG_REVID 0x86 -#define MAC_REG_MIBREAD 0x88 -#define MAC_REG_BPMA 0x8C -#define MAC_REG_EEWR_DATA 0x8C -#define MAC_REG_BPMD_WR 0x8F -#define MAC_REG_BPCMD 0x90 -#define MAC_REG_BPMD_RD 0x91 -#define MAC_REG_EECHKSUM 0x92 -#define MAC_REG_EECSR 0x93 -#define MAC_REG_EERD_DATA 0x94 -#define MAC_REG_EADDR 0x96 -#define MAC_REG_EMBCMD 0x97 -#define MAC_REG_JMPSR0 0x98 -#define MAC_REG_JMPSR1 0x99 -#define MAC_REG_JMPSR2 0x9A -#define MAC_REG_JMPSR3 0x9B -#define MAC_REG_CHIPGSR 0x9C -#define MAC_REG_TESTCFG 0x9D -#define MAC_REG_DEBUG 0x9E -#define MAC_REG_CHIPGCR 0x9F /* Chip Operation and Diagnostic Control */ -#define MAC_REG_WOLCR0_SET 0xA0 -#define MAC_REG_WOLCR1_SET 0xA1 -#define MAC_REG_PWCFG_SET 0xA2 -#define MAC_REG_WOLCFG_SET 0xA3 -#define MAC_REG_WOLCR0_CLR 0xA4 -#define MAC_REG_WOLCR1_CLR 0xA5 -#define MAC_REG_PWCFG_CLR 0xA6 -#define MAC_REG_WOLCFG_CLR 0xA7 -#define MAC_REG_WOLSR0_SET 0xA8 -#define MAC_REG_WOLSR1_SET 0xA9 -#define MAC_REG_WOLSR0_CLR 0xAC -#define MAC_REG_WOLSR1_CLR 0xAD -#define MAC_REG_PATRN_CRC0 0xB0 -#define MAC_REG_PATRN_CRC1 0xB2 -#define MAC_REG_PATRN_CRC2 0xB4 -#define MAC_REG_PATRN_CRC3 0xB6 -#define MAC_REG_PATRN_CRC4 0xB8 -#define MAC_REG_PATRN_CRC5 0xBA -#define MAC_REG_PATRN_CRC6 0xBC -#define MAC_REG_PATRN_CRC7 0xBE -#define MAC_REG_BYTEMSK0_0 0xC0 -#define MAC_REG_BYTEMSK0_1 0xC4 -#define MAC_REG_BYTEMSK0_2 0xC8 -#define MAC_REG_BYTEMSK0_3 0xCC -#define MAC_REG_BYTEMSK1_0 0xD0 -#define MAC_REG_BYTEMSK1_1 0xD4 -#define MAC_REG_BYTEMSK1_2 0xD8 -#define MAC_REG_BYTEMSK1_3 0xDC -#define MAC_REG_BYTEMSK2_0 0xE0 -#define MAC_REG_BYTEMSK2_1 0xE4 -#define MAC_REG_BYTEMSK2_2 0xE8 -#define MAC_REG_BYTEMSK2_3 0xEC -#define MAC_REG_BYTEMSK3_0 0xF0 -#define MAC_REG_BYTEMSK3_1 0xF4 -#define MAC_REG_BYTEMSK3_2 0xF8 -#define MAC_REG_BYTEMSK3_3 0xFC - -/* - * Bits in the RCR register - */ - -#define RCR_AS 0x80 -#define RCR_AP 0x40 -#define RCR_AL 0x20 -#define RCR_PROM 0x10 -#define RCR_AB 0x08 -#define RCR_AM 0x04 -#define RCR_AR 0x02 -#define RCR_SEP 0x01 - -/* - * Bits in the TCR register - */ - -#define TCR_TB2BDIS 0x80 -#define TCR_COLTMC1 0x08 -#define TCR_COLTMC0 0x04 -#define TCR_LB1 0x02 /* loopback[1] */ -#define TCR_LB0 0x01 /* loopback[0] */ - -/* - * Bits in the CR0 register - */ - -#define CR0_TXON 0x00000008UL -#define CR0_RXON 0x00000004UL -#define CR0_STOP 0x00000002UL /* stop MAC, default = 1 */ -#define CR0_STRT 0x00000001UL /* start MAC */ -#define CR0_SFRST 0x00008000UL /* software reset */ -#define CR0_TM1EN 0x00004000UL -#define CR0_TM0EN 0x00002000UL -#define CR0_DPOLL 0x00000800UL /* disable rx/tx auto polling */ -#define CR0_DISAU 0x00000100UL -#define CR0_XONEN 0x00800000UL -#define CR0_FDXTFCEN 0x00400000UL /* full-duplex TX flow control enable */ -#define CR0_FDXRFCEN 0x00200000UL /* full-duplex RX flow control enable */ -#define CR0_HDXFCEN 0x00100000UL /* half-duplex flow control enable */ -#define CR0_XHITH1 0x00080000UL /* TX XON high threshold 1 */ -#define CR0_XHITH0 0x00040000UL /* TX XON high threshold 0 */ -#define CR0_XLTH1 0x00020000UL /* TX pause frame low threshold 1 */ -#define CR0_XLTH0 0x00010000UL /* TX pause frame low threshold 0 */ -#define CR0_GSPRST 0x80000000UL -#define CR0_FORSRST 0x40000000UL -#define CR0_FPHYRST 0x20000000UL -#define CR0_DIAG 0x10000000UL -#define CR0_INTPCTL 0x04000000UL -#define CR0_GINTMSK1 0x02000000UL -#define CR0_GINTMSK0 0x01000000UL - -/* - * Bits in the CR1 register - */ - -#define CR1_SFRST 0x80 /* software reset */ -#define CR1_TM1EN 0x40 -#define CR1_TM0EN 0x20 -#define CR1_DPOLL 0x08 /* disable rx/tx auto polling */ -#define CR1_DISAU 0x01 - -/* - * Bits in the CR2 register - */ - -#define CR2_XONEN 0x80 -#define CR2_FDXTFCEN 0x40 /* full-duplex TX flow control enable */ -#define CR2_FDXRFCEN 0x20 /* full-duplex RX flow control enable */ -#define CR2_HDXFCEN 0x10 /* half-duplex flow control enable */ -#define CR2_XHITH1 0x08 /* TX XON high threshold 1 */ -#define CR2_XHITH0 0x04 /* TX XON high threshold 0 */ -#define CR2_XLTH1 0x02 /* TX pause frame low threshold 1 */ -#define CR2_XLTH0 0x01 /* TX pause frame low threshold 0 */ - -/* - * Bits in the CR3 register - */ - -#define CR3_GSPRST 0x80 -#define CR3_FORSRST 0x40 -#define CR3_FPHYRST 0x20 -#define CR3_DIAG 0x10 -#define CR3_INTPCTL 0x04 -#define CR3_GINTMSK1 0x02 -#define CR3_GINTMSK0 0x01 - -#define ISRCTL_UDPINT 0x8000 -#define ISRCTL_TSUPDIS 0x4000 -#define ISRCTL_RSUPDIS 0x2000 -#define ISRCTL_PMSK1 0x1000 -#define ISRCTL_PMSK0 0x0800 -#define ISRCTL_INTPD 0x0400 -#define ISRCTL_HCRLD 0x0200 -#define ISRCTL_SCRLD 0x0100 - -/* - * Bits in the ISR_CTL1 register - */ - -#define ISRCTL1_UDPINT 0x80 -#define ISRCTL1_TSUPDIS 0x40 -#define ISRCTL1_RSUPDIS 0x20 -#define ISRCTL1_PMSK1 0x10 -#define ISRCTL1_PMSK0 0x08 -#define ISRCTL1_INTPD 0x04 -#define ISRCTL1_HCRLD 0x02 -#define ISRCTL1_SCRLD 0x01 - -/* - * Bits in the TXE_SR register - */ - -#define TXESR_TFDBS 0x08 -#define TXESR_TDWBS 0x04 -#define TXESR_TDRBS 0x02 -#define TXESR_TDSTR 0x01 - -/* - * Bits in the RXE_SR register - */ - -#define RXESR_RFDBS 0x08 -#define RXESR_RDWBS 0x04 -#define RXESR_RDRBS 0x02 -#define RXESR_RDSTR 0x01 - -/* - * Bits in the ISR register - */ - -#define ISR_ISR3 0x80000000UL -#define ISR_ISR2 0x40000000UL -#define ISR_ISR1 0x20000000UL -#define ISR_ISR0 0x10000000UL -#define ISR_TXSTLI 0x02000000UL -#define ISR_RXSTLI 0x01000000UL -#define ISR_HFLD 0x00800000UL -#define ISR_UDPI 0x00400000UL -#define ISR_MIBFI 0x00200000UL -#define ISR_SHDNI 0x00100000UL -#define ISR_PHYI 0x00080000UL -#define ISR_PWEI 0x00040000UL -#define ISR_TMR1I 0x00020000UL -#define ISR_TMR0I 0x00010000UL -#define ISR_SRCI 0x00008000UL -#define ISR_LSTPEI 0x00004000UL -#define ISR_LSTEI 0x00002000UL -#define ISR_OVFI 0x00001000UL -#define ISR_FLONI 0x00000800UL -#define ISR_RACEI 0x00000400UL -#define ISR_TXWB1I 0x00000200UL -#define ISR_TXWB0I 0x00000100UL -#define ISR_PTX3I 0x00000080UL -#define ISR_PTX2I 0x00000040UL -#define ISR_PTX1I 0x00000020UL -#define ISR_PTX0I 0x00000010UL -#define ISR_PTXI 0x00000008UL -#define ISR_PRXI 0x00000004UL -#define ISR_PPTXI 0x00000002UL -#define ISR_PPRXI 0x00000001UL - -/* - * Bits in the IMR register - */ - -#define IMR_TXSTLM 0x02000000UL -#define IMR_UDPIM 0x00400000UL -#define IMR_MIBFIM 0x00200000UL -#define IMR_SHDNIM 0x00100000UL -#define IMR_PHYIM 0x00080000UL -#define IMR_PWEIM 0x00040000UL -#define IMR_TMR1IM 0x00020000UL -#define IMR_TMR0IM 0x00010000UL - -#define IMR_SRCIM 0x00008000UL -#define IMR_LSTPEIM 0x00004000UL -#define IMR_LSTEIM 0x00002000UL -#define IMR_OVFIM 0x00001000UL -#define IMR_FLONIM 0x00000800UL -#define IMR_RACEIM 0x00000400UL -#define IMR_TXWB1IM 0x00000200UL -#define IMR_TXWB0IM 0x00000100UL - -#define IMR_PTX3IM 0x00000080UL -#define IMR_PTX2IM 0x00000040UL -#define IMR_PTX1IM 0x00000020UL -#define IMR_PTX0IM 0x00000010UL -#define IMR_PTXIM 0x00000008UL -#define IMR_PRXIM 0x00000004UL -#define IMR_PPTXIM 0x00000002UL -#define IMR_PPRXIM 0x00000001UL - -/* 0x0013FB0FUL = initial value of IMR */ - -#define INT_MASK_DEF (IMR_PPTXIM|IMR_PPRXIM|IMR_PTXIM|IMR_PRXIM|\ - IMR_PWEIM|IMR_TXWB0IM|IMR_TXWB1IM|IMR_FLONIM|\ - IMR_OVFIM|IMR_LSTEIM|IMR_LSTPEIM|IMR_SRCIM|IMR_MIBFIM|\ - IMR_SHDNIM|IMR_TMR1IM|IMR_TMR0IM|IMR_TXSTLM) - -/* - * Bits in the TDCSR0/1, RDCSR0 register - */ - -#define TRDCSR_DEAD 0x0008 -#define TRDCSR_WAK 0x0004 -#define TRDCSR_ACT 0x0002 -#define TRDCSR_RUN 0x0001 - -/* - * Bits in the CAMADDR register - */ - -#define CAMADDR_CAMEN 0x80 -#define CAMADDR_VCAMSL 0x40 - -/* - * Bits in the CAMCR register - */ - -#define CAMCR_PS1 0x80 -#define CAMCR_PS0 0x40 -#define CAMCR_AITRPKT 0x20 -#define CAMCR_AITR16 0x10 -#define CAMCR_CAMRD 0x08 -#define CAMCR_CAMWR 0x04 -#define CAMCR_PS_CAM_MASK 0x40 -#define CAMCR_PS_CAM_DATA 0x80 -#define CAMCR_PS_MAR 0x00 - -/* - * Bits in the MIICFG register - */ - -#define MIICFG_MPO1 0x80 -#define MIICFG_MPO0 0x40 -#define MIICFG_MFDC 0x20 - -/* - * Bits in the MIISR register - */ - -#define MIISR_MIDLE 0x80 - -/* - * Bits in the PHYSR0 register - */ - -#define PHYSR0_PHYRST 0x80 -#define PHYSR0_LINKGD 0x40 -#define PHYSR0_FDPX 0x10 -#define PHYSR0_SPDG 0x08 -#define PHYSR0_SPD10 0x04 -#define PHYSR0_RXFLC 0x02 -#define PHYSR0_TXFLC 0x01 - -/* - * Bits in the PHYSR1 register - */ - -#define PHYSR1_PHYTBI 0x01 - -/* - * Bits in the MIICR register - */ - -#define MIICR_MAUTO 0x80 -#define MIICR_RCMD 0x40 -#define MIICR_WCMD 0x20 -#define MIICR_MDPM 0x10 -#define MIICR_MOUT 0x08 -#define MIICR_MDO 0x04 -#define MIICR_MDI 0x02 -#define MIICR_MDC 0x01 - -/* - * Bits in the MIIADR register - */ - -#define MIIADR_SWMPL 0x80 - -/* - * Bits in the CFGA register - */ - -#define CFGA_PMHCTG 0x08 -#define CFGA_GPIO1PD 0x04 -#define CFGA_ABSHDN 0x02 -#define CFGA_PACPI 0x01 - -/* - * Bits in the CFGB register - */ - -#define CFGB_GTCKOPT 0x80 -#define CFGB_MIIOPT 0x40 -#define CFGB_CRSEOPT 0x20 -#define CFGB_OFSET 0x10 -#define CFGB_CRANDOM 0x08 -#define CFGB_CAP 0x04 -#define CFGB_MBA 0x02 -#define CFGB_BAKOPT 0x01 - -/* - * Bits in the CFGC register - */ - -#define CFGC_EELOAD 0x80 -#define CFGC_BROPT 0x40 -#define CFGC_DLYEN 0x20 -#define CFGC_DTSEL 0x10 -#define CFGC_BTSEL 0x08 -#define CFGC_BPS2 0x04 /* bootrom select[2] */ -#define CFGC_BPS1 0x02 /* bootrom select[1] */ -#define CFGC_BPS0 0x01 /* bootrom select[0] */ - -/* - * Bits in the CFGD register - */ - -#define CFGD_IODIS 0x80 -#define CFGD_MSLVDACEN 0x40 -#define CFGD_CFGDACEN 0x20 -#define CFGD_PCI64EN 0x10 -#define CFGD_HTMRL4 0x08 - -/* - * Bits in the DCFG1 register - */ - -#define DCFG_XMWI 0x8000 -#define DCFG_XMRM 0x4000 -#define DCFG_XMRL 0x2000 -#define DCFG_PERDIS 0x1000 -#define DCFG_MRWAIT 0x0400 -#define DCFG_MWWAIT 0x0200 -#define DCFG_LATMEN 0x0100 - -/* - * Bits in the MCFG0 register - */ - -#define MCFG_RXARB 0x0080 -#define MCFG_RFT1 0x0020 -#define MCFG_RFT0 0x0010 -#define MCFG_LOWTHOPT 0x0008 -#define MCFG_PQEN 0x0004 -#define MCFG_RTGOPT 0x0002 -#define MCFG_VIDFR 0x0001 - -/* - * Bits in the MCFG1 register - */ - -#define MCFG_TXARB 0x8000 -#define MCFG_TXQBK1 0x0800 -#define MCFG_TXQBK0 0x0400 -#define MCFG_TXQNOBK 0x0200 -#define MCFG_SNAPOPT 0x0100 - -/* - * Bits in the PMCC register - */ - -#define PMCC_DSI 0x80 -#define PMCC_D2_DIS 0x40 -#define PMCC_D1_DIS 0x20 -#define PMCC_D3C_EN 0x10 -#define PMCC_D3H_EN 0x08 -#define PMCC_D2_EN 0x04 -#define PMCC_D1_EN 0x02 -#define PMCC_D0_EN 0x01 - -/* - * Bits in STICKHW - */ - -#define STICKHW_SWPTAG 0x10 -#define STICKHW_WOLSR 0x08 -#define STICKHW_WOLEN 0x04 -#define STICKHW_DS1 0x02 /* R/W by software/cfg cycle */ -#define STICKHW_DS0 0x01 /* suspend well DS write port */ - -/* - * Bits in the MIBCR register - */ - -#define MIBCR_MIBISTOK 0x80 -#define MIBCR_MIBISTGO 0x40 -#define MIBCR_MIBINC 0x20 -#define MIBCR_MIBHI 0x10 -#define MIBCR_MIBFRZ 0x08 -#define MIBCR_MIBFLSH 0x04 -#define MIBCR_MPTRINI 0x02 -#define MIBCR_MIBCLR 0x01 - -/* - * Bits in the EERSV register - */ - -#define EERSV_BOOT_RPL ((u8) 0x01) /* Boot method selection for VT6110 */ - -#define EERSV_BOOT_MASK ((u8) 0x06) -#define EERSV_BOOT_INT19 ((u8) 0x00) -#define EERSV_BOOT_INT18 ((u8) 0x02) -#define EERSV_BOOT_LOCAL ((u8) 0x04) -#define EERSV_BOOT_BEV ((u8) 0x06) - - -/* - * Bits in BPCMD - */ - -#define BPCMD_BPDNE 0x80 -#define BPCMD_EBPWR 0x02 -#define BPCMD_EBPRD 0x01 - -/* - * Bits in the EECSR register - */ - -#define EECSR_EMBP 0x40 /* eeprom embedded programming */ -#define EECSR_RELOAD 0x20 /* eeprom content reload */ -#define EECSR_DPM 0x10 /* eeprom direct programming */ -#define EECSR_ECS 0x08 /* eeprom CS pin */ -#define EECSR_ECK 0x04 /* eeprom CK pin */ -#define EECSR_EDI 0x02 /* eeprom DI pin */ -#define EECSR_EDO 0x01 /* eeprom DO pin */ - -/* - * Bits in the EMBCMD register - */ - -#define EMBCMD_EDONE 0x80 -#define EMBCMD_EWDIS 0x08 -#define EMBCMD_EWEN 0x04 -#define EMBCMD_EWR 0x02 -#define EMBCMD_ERD 0x01 - -/* - * Bits in TESTCFG register - */ - -#define TESTCFG_HBDIS 0x80 - -/* - * Bits in CHIPGCR register - */ - -#define CHIPGCR_FCGMII 0x80 /* force GMII (else MII only) */ -#define CHIPGCR_FCFDX 0x40 /* force full duplex */ -#define CHIPGCR_FCRESV 0x20 -#define CHIPGCR_FCMODE 0x10 /* enable MAC forced mode */ -#define CHIPGCR_LPSOPT 0x08 -#define CHIPGCR_TM1US 0x04 -#define CHIPGCR_TM0US 0x02 -#define CHIPGCR_PHYINTEN 0x01 - -/* - * Bits in WOLCR0 - */ - -#define WOLCR_MSWOLEN7 0x0080 /* enable pattern match filtering */ -#define WOLCR_MSWOLEN6 0x0040 -#define WOLCR_MSWOLEN5 0x0020 -#define WOLCR_MSWOLEN4 0x0010 -#define WOLCR_MSWOLEN3 0x0008 -#define WOLCR_MSWOLEN2 0x0004 -#define WOLCR_MSWOLEN1 0x0002 -#define WOLCR_MSWOLEN0 0x0001 -#define WOLCR_ARP_EN 0x0001 - -/* - * Bits in WOLCR1 - */ - -#define WOLCR_LINKOFF_EN 0x0800 /* link off detected enable */ -#define WOLCR_LINKON_EN 0x0400 /* link on detected enable */ -#define WOLCR_MAGIC_EN 0x0200 /* magic packet filter enable */ -#define WOLCR_UNICAST_EN 0x0100 /* unicast filter enable */ - - -/* - * Bits in PWCFG - */ - -#define PWCFG_PHYPWOPT 0x80 /* internal MII I/F timing */ -#define PWCFG_PCISTICK 0x40 /* PCI sticky R/W enable */ -#define PWCFG_WOLTYPE 0x20 /* pulse(1) or button (0) */ -#define PWCFG_LEGCY_WOL 0x10 -#define PWCFG_PMCSR_PME_SR 0x08 -#define PWCFG_PMCSR_PME_EN 0x04 /* control by PCISTICK */ -#define PWCFG_LEGACY_WOLSR 0x02 /* Legacy WOL_SR shadow */ -#define PWCFG_LEGACY_WOLEN 0x01 /* Legacy WOL_EN shadow */ - -/* - * Bits in WOLCFG - */ - -#define WOLCFG_PMEOVR 0x80 /* for legacy use, force PMEEN always */ -#define WOLCFG_SAM 0x20 /* accept multicast case reset, default=0 */ -#define WOLCFG_SAB 0x10 /* accept broadcast case reset, default=0 */ -#define WOLCFG_SMIIACC 0x08 /* ?? */ -#define WOLCFG_SGENWH 0x02 -#define WOLCFG_PHYINTEN 0x01 /* 0:PHYINT trigger enable, 1:use internal MII - to report status change */ -/* - * Bits in WOLSR1 - */ - -#define WOLSR_LINKOFF_INT 0x0800 -#define WOLSR_LINKON_INT 0x0400 -#define WOLSR_MAGIC_INT 0x0200 -#define WOLSR_UNICAST_INT 0x0100 - -/* - * Ethernet address filter type - */ - -#define PKT_TYPE_NONE 0x0000 /* Turn off receiver */ -#define PKT_TYPE_DIRECTED 0x0001 /* obselete, directed address is always accepted */ -#define PKT_TYPE_MULTICAST 0x0002 -#define PKT_TYPE_ALL_MULTICAST 0x0004 -#define PKT_TYPE_BROADCAST 0x0008 -#define PKT_TYPE_PROMISCUOUS 0x0020 -#define PKT_TYPE_LONG 0x2000 /* NOTE.... the definition of LONG is >2048 bytes in our chip */ -#define PKT_TYPE_RUNT 0x4000 -#define PKT_TYPE_ERROR 0x8000 /* Accept error packets, e.g. CRC error */ - -/* - * Loopback mode - */ - -#define MAC_LB_NONE 0x00 -#define MAC_LB_INTERNAL 0x01 -#define MAC_LB_EXTERNAL 0x02 - -/* - * Enabled mask value of irq - */ - -#if defined(_SIM) -#define IMR_MASK_VALUE 0x0033FF0FUL /* initial value of IMR - set IMR0 to 0x0F according to spec */ - -#else -#define IMR_MASK_VALUE 0x0013FB0FUL /* initial value of IMR - ignore MIBFI,RACEI to - reduce intr. frequency - NOTE.... do not enable NoBuf int mask at driver driver - when (1) NoBuf -> RxThreshold = SF - (2) OK -> RxThreshold = original value - */ -#endif - -/* - * Revision id - */ - -#define REV_ID_VT3119_A0 0x00 -#define REV_ID_VT3119_A1 0x01 -#define REV_ID_VT3216_A0 0x10 - -/* - * Max time out delay time - */ - -#define W_MAX_TIMEOUT 0x0FFFU - - -/* - * MAC registers as a structure. Cannot be directly accessed this - * way but generates offsets for readl/writel() calls - */ - -struct mac_regs { - volatile u8 PAR[6]; /* 0x00 */ - volatile u8 RCR; - volatile u8 TCR; - - volatile __le32 CR0Set; /* 0x08 */ - volatile __le32 CR0Clr; /* 0x0C */ - - volatile u8 MARCAM[8]; /* 0x10 */ - - volatile __le32 DecBaseHi; /* 0x18 */ - volatile __le16 DbfBaseHi; /* 0x1C */ - volatile __le16 reserved_1E; - - volatile __le16 ISRCTL; /* 0x20 */ - volatile u8 TXESR; - volatile u8 RXESR; - - volatile __le32 ISR; /* 0x24 */ - volatile __le32 IMR; - - volatile __le32 TDStatusPort; /* 0x2C */ - - volatile __le16 TDCSRSet; /* 0x30 */ - volatile u8 RDCSRSet; - volatile u8 reserved_33; - volatile __le16 TDCSRClr; - volatile u8 RDCSRClr; - volatile u8 reserved_37; - - volatile __le32 RDBaseLo; /* 0x38 */ - volatile __le16 RDIdx; /* 0x3C */ - volatile u8 TQETMR; /* 0x3E, VT3216 and above only */ - volatile u8 RQETMR; /* 0x3F, VT3216 and above only */ - - volatile __le32 TDBaseLo[4]; /* 0x40 */ - - volatile __le16 RDCSize; /* 0x50 */ - volatile __le16 TDCSize; /* 0x52 */ - volatile __le16 TDIdx[4]; /* 0x54 */ - volatile __le16 tx_pause_timer; /* 0x5C */ - volatile __le16 RBRDU; /* 0x5E */ - - volatile __le32 FIFOTest0; /* 0x60 */ - volatile __le32 FIFOTest1; /* 0x64 */ - - volatile u8 CAMADDR; /* 0x68 */ - volatile u8 CAMCR; /* 0x69 */ - volatile u8 GFTEST; /* 0x6A */ - volatile u8 FTSTCMD; /* 0x6B */ - - volatile u8 MIICFG; /* 0x6C */ - volatile u8 MIISR; - volatile u8 PHYSR0; - volatile u8 PHYSR1; - volatile u8 MIICR; - volatile u8 MIIADR; - volatile __le16 MIIDATA; - - volatile __le16 SoftTimer0; /* 0x74 */ - volatile __le16 SoftTimer1; - - volatile u8 CFGA; /* 0x78 */ - volatile u8 CFGB; - volatile u8 CFGC; - volatile u8 CFGD; - - volatile __le16 DCFG; /* 0x7C */ - volatile __le16 MCFG; - - volatile u8 TBIST; /* 0x80 */ - volatile u8 RBIST; - volatile u8 PMCPORT; - volatile u8 STICKHW; - - volatile u8 MIBCR; /* 0x84 */ - volatile u8 reserved_85; - volatile u8 rev_id; - volatile u8 PORSTS; - - volatile __le32 MIBData; /* 0x88 */ - - volatile __le16 EEWrData; - - volatile u8 reserved_8E; - volatile u8 BPMDWr; - volatile u8 BPCMD; - volatile u8 BPMDRd; - - volatile u8 EECHKSUM; /* 0x92 */ - volatile u8 EECSR; - - volatile __le16 EERdData; /* 0x94 */ - volatile u8 EADDR; - volatile u8 EMBCMD; - - - volatile u8 JMPSR0; /* 0x98 */ - volatile u8 JMPSR1; - volatile u8 JMPSR2; - volatile u8 JMPSR3; - volatile u8 CHIPGSR; /* 0x9C */ - volatile u8 TESTCFG; - volatile u8 DEBUG; - volatile u8 CHIPGCR; - - volatile __le16 WOLCRSet; /* 0xA0 */ - volatile u8 PWCFGSet; - volatile u8 WOLCFGSet; - - volatile __le16 WOLCRClr; /* 0xA4 */ - volatile u8 PWCFGCLR; - volatile u8 WOLCFGClr; - - volatile __le16 WOLSRSet; /* 0xA8 */ - volatile __le16 reserved_AA; - - volatile __le16 WOLSRClr; /* 0xAC */ - volatile __le16 reserved_AE; - - volatile __le16 PatternCRC[8]; /* 0xB0 */ - volatile __le32 ByteMask[4][4]; /* 0xC0 */ -}; - - -enum hw_mib { - HW_MIB_ifRxAllPkts = 0, - HW_MIB_ifRxOkPkts, - HW_MIB_ifTxOkPkts, - HW_MIB_ifRxErrorPkts, - HW_MIB_ifRxRuntOkPkt, - HW_MIB_ifRxRuntErrPkt, - HW_MIB_ifRx64Pkts, - HW_MIB_ifTx64Pkts, - HW_MIB_ifRx65To127Pkts, - HW_MIB_ifTx65To127Pkts, - HW_MIB_ifRx128To255Pkts, - HW_MIB_ifTx128To255Pkts, - HW_MIB_ifRx256To511Pkts, - HW_MIB_ifTx256To511Pkts, - HW_MIB_ifRx512To1023Pkts, - HW_MIB_ifTx512To1023Pkts, - HW_MIB_ifRx1024To1518Pkts, - HW_MIB_ifTx1024To1518Pkts, - HW_MIB_ifTxEtherCollisions, - HW_MIB_ifRxPktCRCE, - HW_MIB_ifRxJumboPkts, - HW_MIB_ifTxJumboPkts, - HW_MIB_ifRxMacControlFrames, - HW_MIB_ifTxMacControlFrames, - HW_MIB_ifRxPktFAE, - HW_MIB_ifRxLongOkPkt, - HW_MIB_ifRxLongPktErrPkt, - HW_MIB_ifTXSQEErrors, - HW_MIB_ifRxNobuf, - HW_MIB_ifRxSymbolErrors, - HW_MIB_ifInRangeLengthErrors, - HW_MIB_ifLateCollisions, - HW_MIB_SIZE -}; - -enum chip_type { - CHIP_TYPE_VT6110 = 1, -}; - -struct velocity_info_tbl { - enum chip_type chip_id; - const char *name; - int txqueue; - u32 flags; -}; - -#define mac_hw_mibs_init(regs) {\ - BYTE_REG_BITS_ON(MIBCR_MIBFRZ,&((regs)->MIBCR));\ - BYTE_REG_BITS_ON(MIBCR_MIBCLR,&((regs)->MIBCR));\ - do {}\ - while (BYTE_REG_BITS_IS_ON(MIBCR_MIBCLR,&((regs)->MIBCR)));\ - BYTE_REG_BITS_OFF(MIBCR_MIBFRZ,&((regs)->MIBCR));\ -} - -#define mac_read_isr(regs) readl(&((regs)->ISR)) -#define mac_write_isr(regs, x) writel((x),&((regs)->ISR)) -#define mac_clear_isr(regs) writel(0xffffffffL,&((regs)->ISR)) - -#define mac_write_int_mask(mask, regs) writel((mask),&((regs)->IMR)); -#define mac_disable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Clr)) -#define mac_enable_int(regs) writel(CR0_GINTMSK1,&((regs)->CR0Set)) - -#define mac_set_dma_length(regs, n) {\ - BYTE_REG_BITS_SET((n),0x07,&((regs)->DCFG));\ -} - -#define mac_set_rx_thresh(regs, n) {\ - BYTE_REG_BITS_SET((n),(MCFG_RFT0|MCFG_RFT1),&((regs)->MCFG));\ -} - -#define mac_rx_queue_run(regs) {\ - writeb(TRDCSR_RUN, &((regs)->RDCSRSet));\ -} - -#define mac_rx_queue_wake(regs) {\ - writeb(TRDCSR_WAK, &((regs)->RDCSRSet));\ -} - -#define mac_tx_queue_run(regs, n) {\ - writew(TRDCSR_RUN<<((n)*4),&((regs)->TDCSRSet));\ -} - -#define mac_tx_queue_wake(regs, n) {\ - writew(TRDCSR_WAK<<(n*4),&((regs)->TDCSRSet));\ -} - -static inline void mac_eeprom_reload(struct mac_regs __iomem * regs) { - int i=0; - - BYTE_REG_BITS_ON(EECSR_RELOAD,&(regs->EECSR)); - do { - udelay(10); - if (i++>0x1000) - break; - } while (BYTE_REG_BITS_IS_ON(EECSR_RELOAD,&(regs->EECSR))); -} - -/* - * Header for WOL definitions. Used to compute hashes - */ - -typedef u8 MCAM_ADDR[ETH_ALEN]; - -struct arp_packet { - u8 dest_mac[ETH_ALEN]; - u8 src_mac[ETH_ALEN]; - __be16 type; - __be16 ar_hrd; - __be16 ar_pro; - u8 ar_hln; - u8 ar_pln; - __be16 ar_op; - u8 ar_sha[ETH_ALEN]; - u8 ar_sip[4]; - u8 ar_tha[ETH_ALEN]; - u8 ar_tip[4]; -} __packed; - -struct _magic_packet { - u8 dest_mac[6]; - u8 src_mac[6]; - __be16 type; - u8 MAC[16][6]; - u8 password[6]; -} __packed; - -/* - * Store for chip context when saving and restoring status. Not - * all fields are saved/restored currently. - */ - -struct velocity_context { - u8 mac_reg[256]; - MCAM_ADDR cam_addr[MCAM_SIZE]; - u16 vcam[VCAM_SIZE]; - u32 cammask[2]; - u32 patcrc[2]; - u32 pattern[8]; -}; - -/* - * Registers in the MII (offset unit is WORD) - */ - -// Marvell 88E1000/88E1000S -#define MII_REG_PSCR 0x10 // PHY specific control register - -// -// Bits in the Silicon revision register -// - -#define TCSR_ECHODIS 0x2000 // -#define AUXCR_MDPPS 0x0004 // - -// Bits in the PLED register -#define PLED_LALBE 0x0004 // - -// Marvell 88E1000/88E1000S Bits in the PHY specific control register (10h) -#define PSCR_ACRSTX 0x0800 // Assert CRS on Transmit - -#define PHYID_CICADA_CS8201 0x000FC410UL -#define PHYID_VT3216_32BIT 0x000FC610UL -#define PHYID_VT3216_64BIT 0x000FC600UL -#define PHYID_MARVELL_1000 0x01410C50UL -#define PHYID_MARVELL_1000S 0x01410C40UL - -#define PHYID_REV_ID_MASK 0x0000000FUL - -#define PHYID_GET_PHY_ID(i) ((i) & ~PHYID_REV_ID_MASK) - -#define MII_REG_BITS_ON(x,i,p) do {\ - u16 w;\ - velocity_mii_read((p),(i),&(w));\ - (w)|=(x);\ - velocity_mii_write((p),(i),(w));\ -} while (0) - -#define MII_REG_BITS_OFF(x,i,p) do {\ - u16 w;\ - velocity_mii_read((p),(i),&(w));\ - (w)&=(~(x));\ - velocity_mii_write((p),(i),(w));\ -} while (0) - -#define MII_REG_BITS_IS_ON(x,i,p) ({\ - u16 w;\ - velocity_mii_read((p),(i),&(w));\ - ((int) ((w) & (x)));}) - -#define MII_GET_PHY_ID(p) ({\ - u32 id;\ - velocity_mii_read((p),MII_PHYSID2,(u16 *) &id);\ - velocity_mii_read((p),MII_PHYSID1,((u16 *) &id)+1);\ - (id);}) - -/* - * Inline debug routine - */ - - -enum velocity_msg_level { - MSG_LEVEL_ERR = 0, //Errors that will cause abnormal operation. - MSG_LEVEL_NOTICE = 1, //Some errors need users to be notified. - MSG_LEVEL_INFO = 2, //Normal message. - MSG_LEVEL_VERBOSE = 3, //Will report all trival errors. - MSG_LEVEL_DEBUG = 4 //Only for debug purpose. -}; - -#ifdef VELOCITY_DEBUG -#define ASSERT(x) { \ - if (!(x)) { \ - printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\ - __func__, __LINE__);\ - BUG(); \ - }\ -} -#define VELOCITY_DBG(p,args...) printk(p, ##args) -#else -#define ASSERT(x) -#define VELOCITY_DBG(x) -#endif - -#define VELOCITY_PRT(l, p, args...) do {if (l<=msglevel) printk( p ,##args);} while (0) - -#define VELOCITY_PRT_CAMMASK(p,t) {\ - int i;\ - if ((t)==VELOCITY_MULTICAST_CAM) {\ - for (i=0;i<(MCAM_SIZE/8);i++)\ - printk("%02X",(p)->mCAMmask[i]);\ - }\ - else {\ - for (i=0;i<(VCAM_SIZE/8);i++)\ - printk("%02X",(p)->vCAMmask[i]);\ - }\ - printk("\n");\ -} - - - -#define VELOCITY_WOL_MAGIC 0x00000000UL -#define VELOCITY_WOL_PHY 0x00000001UL -#define VELOCITY_WOL_ARP 0x00000002UL -#define VELOCITY_WOL_UCAST 0x00000004UL -#define VELOCITY_WOL_BCAST 0x00000010UL -#define VELOCITY_WOL_MCAST 0x00000020UL -#define VELOCITY_WOL_MAGIC_SEC 0x00000040UL - -/* - * Flags for options - */ - -#define VELOCITY_FLAGS_TAGGING 0x00000001UL -#define VELOCITY_FLAGS_RX_CSUM 0x00000004UL -#define VELOCITY_FLAGS_IP_ALIGN 0x00000008UL -#define VELOCITY_FLAGS_VAL_PKT_LEN 0x00000010UL - -#define VELOCITY_FLAGS_FLOW_CTRL 0x01000000UL - -/* - * Flags for driver status - */ - -#define VELOCITY_FLAGS_OPENED 0x00010000UL -#define VELOCITY_FLAGS_VMNS_CONNECTED 0x00020000UL -#define VELOCITY_FLAGS_VMNS_COMMITTED 0x00040000UL -#define VELOCITY_FLAGS_WOL_ENABLED 0x00080000UL - -/* - * Flags for MII status - */ - -#define VELOCITY_LINK_FAIL 0x00000001UL -#define VELOCITY_SPEED_10 0x00000002UL -#define VELOCITY_SPEED_100 0x00000004UL -#define VELOCITY_SPEED_1000 0x00000008UL -#define VELOCITY_DUPLEX_FULL 0x00000010UL -#define VELOCITY_AUTONEG_ENABLE 0x00000020UL -#define VELOCITY_FORCED_BY_EEPROM 0x00000040UL - -/* - * For velocity_set_media_duplex - */ - -#define VELOCITY_LINK_CHANGE 0x00000001UL - -enum speed_opt { - SPD_DPX_AUTO = 0, - SPD_DPX_100_HALF = 1, - SPD_DPX_100_FULL = 2, - SPD_DPX_10_HALF = 3, - SPD_DPX_10_FULL = 4, - SPD_DPX_1000_FULL = 5 -}; - -enum velocity_init_type { - VELOCITY_INIT_COLD = 0, - VELOCITY_INIT_RESET, - VELOCITY_INIT_WOL -}; - -enum velocity_flow_cntl_type { - FLOW_CNTL_DEFAULT = 1, - FLOW_CNTL_TX, - FLOW_CNTL_RX, - FLOW_CNTL_TX_RX, - FLOW_CNTL_DISABLE, -}; - -struct velocity_opt { - int numrx; /* Number of RX descriptors */ - int numtx; /* Number of TX descriptors */ - enum speed_opt spd_dpx; /* Media link mode */ - - int DMA_length; /* DMA length */ - int rx_thresh; /* RX_THRESH */ - int flow_cntl; - int wol_opts; /* Wake on lan options */ - int td_int_count; - int int_works; - int rx_bandwidth_hi; - int rx_bandwidth_lo; - int rx_bandwidth_en; - int rxqueue_timer; - int txqueue_timer; - int tx_intsup; - int rx_intsup; - u32 flags; -}; - -#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->tx.used[(q)])) - -#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx]) - -struct velocity_info { - struct pci_dev *pdev; - struct net_device *dev; - - unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; - u8 ip_addr[4]; - enum chip_type chip_id; - - struct mac_regs __iomem * mac_regs; - unsigned long memaddr; - unsigned long ioaddr; - - struct tx_info { - int numq; - - /* FIXME: the locality of the data seems rather poor. */ - int used[TX_QUEUE_NO]; - int curr[TX_QUEUE_NO]; - int tail[TX_QUEUE_NO]; - struct tx_desc *rings[TX_QUEUE_NO]; - struct velocity_td_info *infos[TX_QUEUE_NO]; - dma_addr_t pool_dma[TX_QUEUE_NO]; - } tx; - - struct rx_info { - int buf_sz; - - int dirty; - int curr; - u32 filled; - struct rx_desc *ring; - struct velocity_rd_info *info; /* It's an array */ - dma_addr_t pool_dma; - } rx; - - u32 mib_counter[MAX_HW_MIB_COUNTER]; - struct velocity_opt options; - - u32 int_mask; - - u32 flags; - - u32 mii_status; - u32 phy_id; - int multicast_limit; - - u8 vCAMmask[(VCAM_SIZE / 8)]; - u8 mCAMmask[(MCAM_SIZE / 8)]; - - spinlock_t lock; - - int wol_opts; - u8 wol_passwd[6]; - - struct velocity_context context; - - u32 ticks; - - u8 rev_id; - - struct napi_struct napi; -}; - -/** - * velocity_get_ip - find an IP address for the device - * @vptr: Velocity to query - * - * Dig out an IP address for this interface so that we can - * configure wakeup with WOL for ARP. If there are multiple IP - * addresses on this chain then we use the first - multi-IP WOL is not - * supported. - * - */ - -static inline int velocity_get_ip(struct velocity_info *vptr) -{ - struct in_device *in_dev; - struct in_ifaddr *ifa; - int res = -ENOENT; - - rcu_read_lock(); - in_dev = __in_dev_get_rcu(vptr->dev); - if (in_dev != NULL) { - ifa = (struct in_ifaddr *) in_dev->ifa_list; - if (ifa != NULL) { - memcpy(vptr->ip_addr, &ifa->ifa_address, 4); - res = 0; - } - } - rcu_read_unlock(); - return res; -} - -/** - * velocity_update_hw_mibs - fetch MIB counters from chip - * @vptr: velocity to update - * - * The velocity hardware keeps certain counters in the hardware - * side. We need to read these when the user asks for statistics - * or when they overflow (causing an interrupt). The read of the - * statistic clears it, so we keep running master counters in user - * space. - */ - -static inline void velocity_update_hw_mibs(struct velocity_info *vptr) -{ - u32 tmp; - int i; - BYTE_REG_BITS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR)); - - while (BYTE_REG_BITS_IS_ON(MIBCR_MIBFLSH, &(vptr->mac_regs->MIBCR))); - - BYTE_REG_BITS_ON(MIBCR_MPTRINI, &(vptr->mac_regs->MIBCR)); - for (i = 0; i < HW_MIB_SIZE; i++) { - tmp = readl(&(vptr->mac_regs->MIBData)) & 0x00FFFFFFUL; - vptr->mib_counter[i] += tmp; - } -} - -/** - * init_flow_control_register - set up flow control - * @vptr: velocity to configure - * - * Configure the flow control registers for this velocity device. - */ - -static inline void init_flow_control_register(struct velocity_info *vptr) -{ - struct mac_regs __iomem * regs = vptr->mac_regs; - - /* Set {XHITH1, XHITH0, XLTH1, XLTH0} in FlowCR1 to {1, 0, 1, 1} - depend on RD=64, and Turn on XNOEN in FlowCR1 */ - writel((CR0_XONEN | CR0_XHITH1 | CR0_XLTH1 | CR0_XLTH0), ®s->CR0Set); - writel((CR0_FDXTFCEN | CR0_FDXRFCEN | CR0_HDXFCEN | CR0_XHITH0), ®s->CR0Clr); - - /* Set TxPauseTimer to 0xFFFF */ - writew(0xFFFF, ®s->tx_pause_timer); - - /* Initialize RBRDU to Rx buffer count. */ - writew(vptr->options.numrx, ®s->RBRDU); -} - - -#endif -- cgit v1.2.3