From bd8963e602c77adc76dbbbfc3417c3cf14fed76b Mon Sep 17 00:00:00 2001 From: Martin Povišer Date: Tue, 29 Mar 2022 20:38:17 +0200 Subject: i2c: pasemi: Wait for write xfers to finish MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer Reviewed-by: Sven Peter Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pasemi-core.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c index 7728c8460dc0..9028ffb58cc0 100644 --- a/drivers/i2c/busses/i2c-pasemi-core.c +++ b/drivers/i2c/busses/i2c-pasemi-core.c @@ -137,6 +137,12 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, TXFIFO_WR(smbus, msg->buf[msg->len-1] | (stop ? MTXFIFO_STOP : 0)); + + if (stop) { + err = pasemi_smb_waitready(smbus); + if (err) + goto reset_out; + } } return 0; -- cgit v1.2.3 From 39c025721d706eb4fa8a5a7a376c93a3162b71bc Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 8 Apr 2022 19:15:24 +0200 Subject: i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q}, MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X are not affected. MX53 and older status is unknown, as the errata first appears in MX6 errata sheets from 2016 and the latest errata sheet for MX53 is from 2015. Older SoC errata sheets predate the MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata sheet is not available yet. " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " Implement the workaround by matching on the affected SoC specific compatible strings and by limiting the maximum bus frequency in case the SoC is affected. Signed-off-by: Marek Vasut To: linux-i2c@vger.kernel.org Acked-by: Oleksij Rempel Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 27f969b3dc07..e9e2db68b9fb 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -179,6 +179,12 @@ struct imx_i2c_hwdata { unsigned int ndivs; unsigned int i2sr_clr_opcode; unsigned int i2cr_ien_opcode; + /* + * Errata ERR007805 or e7805: + * I2C: When the I2C clock speed is configured for 400 kHz, + * the SCL low period violates the I2C spec of 1.3 uS min. + */ + bool has_err007805; }; struct imx_i2c_dma { @@ -240,6 +246,16 @@ static const struct imx_i2c_hwdata imx21_i2c_hwdata = { }; +static const struct imx_i2c_hwdata imx6_i2c_hwdata = { + .devtype = IMX21_I2C, + .regshift = IMX_I2C_REGSHIFT, + .clk_div = imx_i2c_clk_div, + .ndivs = ARRAY_SIZE(imx_i2c_clk_div), + .i2sr_clr_opcode = I2SR_CLR_OPCODE_W0C, + .i2cr_ien_opcode = I2CR_IEN_OPCODE_1, + .has_err007805 = true, +}; + static struct imx_i2c_hwdata vf610_i2c_hwdata = { .devtype = VF610_I2C, .regshift = VF610_I2C_REGSHIFT, @@ -266,6 +282,16 @@ MODULE_DEVICE_TABLE(platform, imx_i2c_devtype); static const struct of_device_id i2c_imx_dt_ids[] = { { .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, }, { .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, }, + { .compatible = "fsl,imx6q-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sl-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mp-i2c", .data = &imx6_i2c_hwdata, }, + { .compatible = "fsl,imx8mq-i2c", .data = &imx6_i2c_hwdata, }, { .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, }, { /* sentinel */ } }; @@ -551,6 +577,13 @@ static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int div; int i; + if (i2c_imx->hwdata->has_err007805 && i2c_imx->bitrate > 384000) { + dev_dbg(&i2c_imx->adapter.dev, + "SoC errata ERR007805 or e7805 applies, bus frequency limited from %d Hz to 384000 Hz.\n", + i2c_imx->bitrate); + i2c_imx->bitrate = 384000; + } + /* Divider value calculation */ if (i2c_imx->cur_clk == i2c_clk_rate) return; -- cgit v1.2.3 From c60bd968c74749a85c71dfed5fabd3e36d487d54 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 12 Apr 2022 14:26:01 -0700 Subject: i2c: qcom-geni: Use dev_err_probe() for GPI DMA error The GPI DMA engine driver can be compiled as a module, in which case the likely probe deferral "error" shows up in the kernel log. Switch to using dev_err_probe() to silence this warning and to ensure that "devices_deferred" in debugfs carries this information. Signed-off-by: Bjorn Andersson Reviewed-by: Vinod Koul Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-geni.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index fc1dcc19f2a1..5b920f0fc7dd 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -843,10 +843,8 @@ static int geni_i2c_probe(struct platform_device *pdev) /* FIFO is disabled, so we can only use GPI DMA */ gi2c->gpi_mode = true; ret = setup_gpi_dma(gi2c); - if (ret) { - dev_err(dev, "Failed to setup GPI DMA mode:%d ret\n", ret); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n"); dev_dbg(dev, "Using GPI DMA mode for I2C\n"); } else { -- cgit v1.2.3 From 993eb48fa199b5f476df8204e652eff63dd19361 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 11 Apr 2022 21:07:51 +0300 Subject: i2c: dev: check return value when calling dev_set_name() If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref. Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-dev.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index cf5d049342ea..6fd2b6718b08 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -668,16 +668,21 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy) i2c_dev->dev.class = i2c_dev_class; i2c_dev->dev.parent = &adap->dev; i2c_dev->dev.release = i2cdev_dev_release; - dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr); + + res = dev_set_name(&i2c_dev->dev, "i2c-%d", adap->nr); + if (res) + goto err_put_i2c_dev; res = cdev_device_add(&i2c_dev->cdev, &i2c_dev->dev); - if (res) { - put_i2c_dev(i2c_dev, false); - return res; - } + if (res) + goto err_put_i2c_dev; pr_debug("adapter [%s] registered as minor %d\n", adap->name, adap->nr); return 0; + +err_put_i2c_dev: + put_i2c_dev(i2c_dev, false); + return res; } static int i2cdev_detach_adapter(struct device *dev, void *dummy) -- cgit v1.2.3 From aef80e2fbe3ec6264e935cebfb8fa3367cb1e7b0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 11 Apr 2022 21:07:52 +0300 Subject: i2c: dev: Force case user pointers in compat_i2cdev_ioctl() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sparse has warned us about wrong address space for user pointers: i2c-dev.c:561:50: warning: incorrect type in initializer (different address spaces) i2c-dev.c:561:50: expected unsigned char [usertype] *buf i2c-dev.c:561:50: got void [noderef] __user * Force cast the pointer to (__u8 *) that is used by I²C core code. Note, this is an additional fix to the previously addressed similar issue in the I2C_RDWR case in the same function. Fixes: 3265a7e6b41b ("i2c: dev: Add __user annotation") Signed-off-by: Andy Shevchenko Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 6fd2b6718b08..ab0adaa130da 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -557,7 +557,7 @@ static long compat_i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned lo .addr = umsg.addr, .flags = umsg.flags, .len = umsg.len, - .buf = compat_ptr(umsg.buf) + .buf = (__force __u8 *)compat_ptr(umsg.buf), }; } -- cgit v1.2.3 From e35c93695c742b88f5fe32063674551440c63d08 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 5 Apr 2022 17:15:11 +0200 Subject: i2c: ismt: Fix undefined behavior due to shift overflowing the constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix: drivers/i2c/busses/i2c-ismt.c: In function ‘ismt_hw_init’: drivers/i2c/busses/i2c-ismt.c:770:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_400K: ^~~~ drivers/i2c/busses/i2c-ismt.c:773:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_1M: ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov Reviewed-by: Seth Heasley Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ismt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index f4820fd3dc13..c0364314877e 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -145,8 +145,8 @@ #define ISMT_SPGT_SPD_MASK 0xc0000000 /* SMBus Speed mask */ #define ISMT_SPGT_SPD_80K 0x00 /* 80 kHz */ #define ISMT_SPGT_SPD_100K (0x1 << 30) /* 100 kHz */ -#define ISMT_SPGT_SPD_400K (0x2 << 30) /* 400 kHz */ -#define ISMT_SPGT_SPD_1M (0x3 << 30) /* 1 MHz */ +#define ISMT_SPGT_SPD_400K (0x2U << 30) /* 400 kHz */ +#define ISMT_SPGT_SPD_1M (0x3U << 30) /* 1 MHz */ /* MSI Control Register (MSICTL) bit definitions */ -- cgit v1.2.3