From 29453932d8a2ba9f1bf25a951c1b76b9fe86d1b6 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 28 Apr 2010 01:10:50 +0000 Subject: input: serio: add support for Amstrad Delta serial keyboardport The patch introduces a serio driver that supports a keyboard serial port found on the Amstrad Delta videophone board. After initializing the hardware, the driver reads its input data from a buffer filled in by the board FIQ (Fast Interrupt Request) handler. Standard AT keyboard driver (atkbd) will be used on top of the serio layer for handling the E3 keyboard (called mailboard) connected to the port. Since the device generated scancodes differ from what the atkbd expects, a custom key code to scan code table must be loaded from userspace for the keyboard to be useable. Signed-off-by: Janusz Krzysztofik Acked-by: Dmitry Torokhov Signed-off-by: Tony Lindgren --- drivers/input/serio/Kconfig | 16 +++ drivers/input/serio/Makefile | 1 + drivers/input/serio/ams_delta_serio.c | 177 ++++++++++++++++++++++++++++++++++ 3 files changed, 194 insertions(+) create mode 100644 drivers/input/serio/ams_delta_serio.c (limited to 'drivers') diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 7e319d65ec57..f34f1dbeb577 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -209,4 +209,20 @@ config SERIO_ALTERA_PS2 To compile this driver as a module, choose M here: the module will be called altera_ps2. +config SERIO_AMS_DELTA + tristate "Amstrad Delta (E3) mailboard support" + depends on MACH_AMS_DELTA + default y + select AMS_DELTA_FIQ + ---help--- + Say Y here if you have an E3 and want to use its mailboard, + or any standard AT keyboard connected to the mailboard port. + + When used for the E3 mailboard, a non-standard key table + must be loaded from userspace, possibly using udev extras + provided keymap helper utility. + + To compile this driver as a module, choose M here; + the module will be called ams_delta_serio. + endif diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index bf945f789d05..84c80bf7185e 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile @@ -21,5 +21,6 @@ obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o obj-$(CONFIG_SERIO_LIBPS2) += libps2.o obj-$(CONFIG_SERIO_RAW) += serio_raw.o +obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c new file mode 100644 index 000000000000..8f1770e1e08b --- /dev/null +++ b/drivers/input/serio/ams_delta_serio.c @@ -0,0 +1,177 @@ +/* + * Amstrad E3 (Delta) keyboard port driver + * + * Copyright (c) 2006 Matt Callow + * Copyright (c) 2010 Janusz Krzysztofik + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Thanks to Cliff Lawson for his help + * + * The Amstrad Delta keyboard (aka mailboard) uses normal PC-AT style serial + * transmission. The keyboard port is formed of two GPIO lines, for clock + * and data. Due to strict timing requirements of the interface, + * the serial data stream is read and processed by a FIQ handler. + * The resulting words are fetched by this driver from a circular buffer. + * + * Standard AT keyboard driver (atkbd) is used for handling the keyboard data. + * However, when used with the E3 mailboard that producecs non-standard + * scancodes, a custom key table must be prepared and loaded from userspace. + */ +#include +#include +#include +#include + +#include +#include + +#include + +MODULE_AUTHOR("Matt Callow"); +MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver"); +MODULE_LICENSE("GPL"); + +static struct serio *ams_delta_serio; + +static int check_data(int data) +{ + int i, parity = 0; + + /* check valid stop bit */ + if (!(data & 0x400)) { + dev_warn(&ams_delta_serio->dev, + "invalid stop bit, data=0x%X\n", + data); + return SERIO_FRAME; + } + /* calculate the parity */ + for (i = 1; i < 10; i++) { + if (data & (1 << i)) + parity++; + } + /* it should be odd */ + if (!(parity & 0x01)) { + dev_warn(&ams_delta_serio->dev, + "paritiy check failed, data=0x%X parity=0x%X\n", + data, parity); + return SERIO_PARITY; + } + return 0; +} + +static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id) +{ + int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF]; + int data, dfl; + u8 scancode; + + fiq_buffer[FIQ_IRQ_PEND] = 0; + + /* + * Read data from the circular buffer, check it + * and then pass it on the serio + */ + while (fiq_buffer[FIQ_KEYS_CNT] > 0) { + + data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++]; + fiq_buffer[FIQ_KEYS_CNT]--; + if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN]) + fiq_buffer[FIQ_HEAD_OFFSET] = 0; + + dfl = check_data(data); + scancode = (u8) (data >> 1) & 0xFF; + serio_interrupt(ams_delta_serio, scancode, dfl); + } + return IRQ_HANDLED; +} + +static int ams_delta_serio_open(struct serio *serio) +{ + /* enable keyboard */ + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, + AMD_DELTA_LATCH2_KEYBRD_PWR); + + return 0; +} + +static void ams_delta_serio_close(struct serio *serio) +{ + /* disable keyboard */ + ams_delta_latch2_write(AMD_DELTA_LATCH2_KEYBRD_PWR, 0); +} + +static int __init ams_delta_serio_init(void) +{ + int err; + + if (!machine_is_ams_delta()) + return -ENODEV; + + ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!ams_delta_serio) + return -ENOMEM; + + ams_delta_serio->id.type = SERIO_8042; + ams_delta_serio->open = ams_delta_serio_open; + ams_delta_serio->close = ams_delta_serio_close; + strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter", + sizeof(ams_delta_serio->name)); + strlcpy(ams_delta_serio->phys, "GPIO/serio0", + sizeof(ams_delta_serio->phys)); + + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_DATA, "serio-data"); + if (err) { + pr_err("ams_delta_serio: Couldn't request gpio pin for data\n"); + goto serio; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + + err = gpio_request(AMS_DELTA_GPIO_PIN_KEYBRD_CLK, "serio-clock"); + if (err) { + pr_err("ams_delta_serio: couldn't request gpio pin for clock\n"); + goto gpio_data; + } + gpio_direction_input(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); + + err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), + ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING, + "ams-delta-serio", 0); + if (err < 0) { + pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n", + gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK)); + goto gpio_clk; + } + /* + * Since GPIO register handling for keyboard clock pin is performed + * at FIQ level, switch back from edge to simple interrupt handler + * to avoid bad interaction. + */ + set_irq_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), + handle_simple_irq); + + serio_register_port(ams_delta_serio); + dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name); + + return 0; +gpio_clk: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); +gpio_data: + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); +serio: + kfree(ams_delta_serio); + return err; +} +module_init(ams_delta_serio_init); + +static void __exit ams_delta_serio_exit(void) +{ + serio_unregister_port(ams_delta_serio); + free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK); + gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA); + kfree(ams_delta_serio); +} +module_exit(ams_delta_serio_exit); -- cgit v1.2.3 From 8ebeb545a875b1961ede82800711ab31d2ce5782 Mon Sep 17 00:00:00 2001 From: Syed Rafiuddin Date: Fri, 14 May 2010 12:05:25 -0700 Subject: OMAP4: SPI: Fix Driver Kconfig Change dependency to ARCH_OMAP2PLUS to allow systems based on omap24xx, omap34xx or omap44xx Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Syed Rafiuddin Signed-off-by: Abraham Arce Signed-off-by: Tony Lindgren --- drivers/spi/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a191fa2be7c5..f950b6316949 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -180,10 +180,10 @@ config SPI_OMAP_UWIRE This hooks up to the MicroWire controller on OMAP1 chips. config SPI_OMAP24XX - tristate "McSPI driver for OMAP24xx/OMAP34xx" - depends on ARCH_OMAP2 || ARCH_OMAP3 + tristate "McSPI driver for OMAP" + depends on ARCH_OMAP2PLUS help - SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI + SPI master controller for OMAP24XX and later Multichannel SPI (McSPI) modules. config SPI_OMAP_100K -- cgit v1.2.3