From 85730a631f0c9fadcf0cc9587cacc755f50766fa Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Tue, 9 Apr 2013 08:48:06 +0000 Subject: tg3: Add SGMII phy support for 5719/5718 serdes Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 51 ++++++++++++++++++++++++++++++++----- drivers/net/ethernet/broadcom/tg3.h | 7 +++++ 2 files changed, 51 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 568dd07fc052..f53e3094f0dd 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -5465,11 +5465,50 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset) static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) { - int current_link_up, err = 0; + int current_link_up = 0, err = 0; u32 bmsr, bmcr; - u16 current_speed; - u8 current_duplex; - u32 local_adv, remote_adv; + u16 current_speed = SPEED_UNKNOWN; + u8 current_duplex = DUPLEX_UNKNOWN; + u32 local_adv, remote_adv, sgsr; + + if ((tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) && + !tg3_readphy(tp, SERDES_TG3_1000X_STATUS, &sgsr) && + (sgsr & SERDES_TG3_SGMII_MODE)) { + + if (force_reset) + tg3_phy_reset(tp); + + tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK; + + if (!(sgsr & SERDES_TG3_LINK_UP)) { + tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; + } else { + current_link_up = 1; + if (sgsr & SERDES_TG3_SPEED_1000) { + current_speed = SPEED_1000; + tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; + } else if (sgsr & SERDES_TG3_SPEED_100) { + current_speed = SPEED_100; + tp->mac_mode |= MAC_MODE_PORT_MODE_MII; + } else { + current_speed = SPEED_10; + tp->mac_mode |= MAC_MODE_PORT_MODE_MII; + } + + if (sgsr & SERDES_TG3_FULL_DUPLEX) + current_duplex = DUPLEX_FULL; + else + current_duplex = DUPLEX_HALF; + } + + tw32_f(MAC_MODE, tp->mac_mode); + udelay(40); + + tg3_clear_mac_status(tp); + + goto fiber_setup_done; + } tp->mac_mode |= MAC_MODE_PORT_MODE_GMII; tw32_f(MAC_MODE, tp->mac_mode); @@ -5480,9 +5519,6 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) if (force_reset) tg3_phy_reset(tp); - current_link_up = 0; - current_speed = SPEED_UNKNOWN; - current_duplex = DUPLEX_UNKNOWN; tp->link_config.rmt_adv = 0; err |= tg3_readphy(tp, MII_BMSR, &bmsr); @@ -5600,6 +5636,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) } } +fiber_setup_done: if (current_link_up == 1 && current_duplex == DUPLEX_FULL) tg3_setup_flow_control(tp, local_adv, remote_adv); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 1cdc1b641c77..fd00a38b7ab0 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -2371,6 +2371,13 @@ #define MII_TG3_FET_SHDW_AUXSTAT2 0x1b #define MII_TG3_FET_SHDW_AUXSTAT2_APD 0x0020 +/* Serdes PHY Register Definitions */ +#define SERDES_TG3_1000X_STATUS 0x14 +#define SERDES_TG3_SGMII_MODE 0x0001 +#define SERDES_TG3_LINK_UP 0x0002 +#define SERDES_TG3_FULL_DUPLEX 0x0004 +#define SERDES_TG3_SPEED_100 0x0008 +#define SERDES_TG3_SPEED_1000 0x0010 /* APE registers. Accessible through BAR1 */ #define TG3_APE_GPIO_MSG 0x0008 -- cgit v1.2.3