From d590faf9e8f8509a0a0aa79c38e87fcc6b913248 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 27 Nov 2015 14:55:56 +0100 Subject: iio: adis_buffer: Fix out-of-bounds memory access The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message") Signed-off-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/adis_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c index cb32b593f1c5..36607d52fee0 100644 --- a/drivers/iio/imu/adis_buffer.c +++ b/drivers/iio/imu/adis_buffer.c @@ -43,7 +43,7 @@ int adis_update_scan_mode(struct iio_dev *indio_dev, return -ENOMEM; rx = adis->buffer; - tx = rx + indio_dev->scan_bytes; + tx = rx + scan_count; spi_message_init(&adis->msg); -- cgit v1.2.3 From f02b4b72d12cbae7020a959e2ed0410a464b4cc4 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 15 Jan 2016 11:34:21 +0100 Subject: clockevents/tcb_clksrc: Prevent disabling an already disabled clock clockevents_exchange_device is calling clockevents_shutdown() on the new clockenvents device but it may have never been enabled in the first place. This results in the tcb clock being disabled without being enabled first: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6 Hardware name: Atmel AT91SAM9 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (warn_slowpath_common+0x78/0xa0) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x18/0x20) [] (warn_slowpath_null) from [] (clk_disable+0x28/0x34) [] (clk_disable) from [] (tc_shutdown+0x38/0x4c) [] (tc_shutdown) from [] (clockevents_switch_state+0x38/0x6c) [] (clockevents_switch_state) from [] (clockevents_shutdown+0x10/0x24) [] (clockevents_shutdown) from [] (tick_check_new_device+0x84/0xac) [] (tick_check_new_device) from [] (clockevents_register_device+0x7c/0x108) [] (clockevents_register_device) from [] (tcb_clksrc_init+0x390/0x3e8) [] (tcb_clksrc_init) from [] (do_one_initcall+0x114/0x1d4) [] (do_one_initcall) from [] (kernel_init_freeable+0xfc/0x1b8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe0) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) ---[ end trace 0000000000000001 ]--- Check what state we were in before trying to disable the clock. Fixes: cf4541c101ea ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface") Signed-off-by: Alexandre Belloni Cc: Nicolas Ferre Cc: Boris Brezillon Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.com Signed-off-by: Thomas Gleixner --- drivers/clocksource/tcb_clksrc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 6ee91401918e..4da2af9694a2 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -98,7 +98,8 @@ static int tc_shutdown(struct clock_event_device *d) __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR)); __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); - clk_disable(tcd->clk); + if (!clockevent_state_detached(d)) + clk_disable(tcd->clk); return 0; } -- cgit v1.2.3 From e160e4db833c7e8587ec3c88efaed0d84f1bcf42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 14 Jan 2016 13:48:24 -0500 Subject: drm/amdgpu: fix tonga smu resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Need to make sure smu buffers are pinned on resume. This matches what Fiji does. Cc: stable@vger.kernel.org Reviewed-by: Junwei Zhang Reviewed-by: Christian König Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/tonga_dpm.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c b/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c index f4a1346525fe..0497784b3652 100644 --- a/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/tonga_dpm.c @@ -122,25 +122,12 @@ static int tonga_dpm_hw_fini(void *handle) static int tonga_dpm_suspend(void *handle) { - return 0; + return tonga_dpm_hw_fini(handle); } static int tonga_dpm_resume(void *handle) { - int ret; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - mutex_lock(&adev->pm.mutex); - - ret = tonga_smu_start(adev); - if (ret) { - DRM_ERROR("SMU start failed\n"); - goto fail; - } - -fail: - mutex_unlock(&adev->pm.mutex); - return ret; + return tonga_dpm_hw_init(handle); } static int tonga_dpm_set_clockgating_state(void *handle, -- cgit v1.2.3 From 7776a69386179ea477f501aa222692b9856ec56c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2015 10:59:16 -0400 Subject: drm/amdgpu: Add some tweaks to gfx 8 soft reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reviewed-by: Junwei Zhang Reviewed-by: Christian König Reviewed-by: Ken Wang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 13235d84e5a6..95c0cdfbd1b3 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -4186,7 +4186,18 @@ static int gfx_v8_0_soft_reset(void *handle) gfx_v8_0_cp_gfx_enable(adev, false); /* Disable MEC parsing/prefetching */ - /* XXX todo */ + gfx_v8_0_cp_compute_enable(adev, false); + + if (grbm_soft_reset || srbm_soft_reset) { + tmp = RREG32(mmGMCON_DEBUG); + tmp = REG_SET_FIELD(tmp, + GMCON_DEBUG, GFX_STALL, 1); + tmp = REG_SET_FIELD(tmp, + GMCON_DEBUG, GFX_CLEAR, 1); + WREG32(mmGMCON_DEBUG, tmp); + + udelay(50); + } if (grbm_soft_reset) { tmp = RREG32(mmGRBM_SOFT_RESET); @@ -4215,6 +4226,16 @@ static int gfx_v8_0_soft_reset(void *handle) WREG32(mmSRBM_SOFT_RESET, tmp); tmp = RREG32(mmSRBM_SOFT_RESET); } + + if (grbm_soft_reset || srbm_soft_reset) { + tmp = RREG32(mmGMCON_DEBUG); + tmp = REG_SET_FIELD(tmp, + GMCON_DEBUG, GFX_STALL, 0); + tmp = REG_SET_FIELD(tmp, + GMCON_DEBUG, GFX_CLEAR, 0); + WREG32(mmGMCON_DEBUG, tmp); + } + /* Wait a little for things to settle down */ udelay(50); gfx_v8_0_print_status((void *)adev); -- cgit v1.2.3 From ce90d092bcd96b646b370121f0f1508270627f98 Mon Sep 17 00:00:00 2001 From: Mark Yao Date: Tue, 12 Jan 2016 15:51:12 +0800 Subject: drm/rockchip: Don't build rockchip_drm_vop as modules rockchip_drm_vop's module init had moved to rockchip_vop_reg.c so no need to build rockchip_drm_vop.ko Signed-off-by: Mark Yao --- drivers/gpu/drm/rockchip/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile index d1dc0f7b01db..a4e03bcde035 100644 --- a/drivers/gpu/drm/rockchip/Makefile +++ b/drivers/gpu/drm/rockchip/Makefile @@ -3,10 +3,9 @@ # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \ - rockchip_drm_gem.o + rockchip_drm_gem.o rockchip_drm_vop.o obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o -obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o \ - rockchip_vop_reg.o +obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_vop_reg.o -- cgit v1.2.3 From 63087aae5a7976a4557d16873146eae03948ec74 Mon Sep 17 00:00:00 2001 From: Mark Yao Date: Tue, 12 Jan 2016 16:04:39 +0800 Subject: drm/rockchip: cleanup unnecessary export symbol Now rockchip_drm_vop.c is build into rockchipdrm.ko, so no need to export following symbol anymore: rockchip_drm_dma_attach_device rockchip_drm_dma_detach_device rockchip_drm_dma_attach_device rockchip_drm_dma_detach_device rockchip_register_crtc_funcs rockchip_unregister_crtc_funcs rockchip_fb_get_gem_obj Signed-off-by: Mark Yao --- drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 4 ---- drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 1 - 2 files changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c index 8397d1b62ef9..a0d51ccb6ea4 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.c @@ -55,14 +55,12 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, return arm_iommu_attach_device(dev, mapping); } -EXPORT_SYMBOL_GPL(rockchip_drm_dma_attach_device); void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, struct device *dev) { arm_iommu_detach_device(dev); } -EXPORT_SYMBOL_GPL(rockchip_drm_dma_detach_device); int rockchip_register_crtc_funcs(struct drm_crtc *crtc, const struct rockchip_crtc_funcs *crtc_funcs) @@ -77,7 +75,6 @@ int rockchip_register_crtc_funcs(struct drm_crtc *crtc, return 0; } -EXPORT_SYMBOL_GPL(rockchip_register_crtc_funcs); void rockchip_unregister_crtc_funcs(struct drm_crtc *crtc) { @@ -89,7 +86,6 @@ void rockchip_unregister_crtc_funcs(struct drm_crtc *crtc) priv->crtc_funcs[pipe] = NULL; } -EXPORT_SYMBOL_GPL(rockchip_unregister_crtc_funcs); static struct drm_crtc *rockchip_crtc_from_pipe(struct drm_device *drm, int pipe) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c index f7844883cb76..dd1f8d3c98d8 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c @@ -39,7 +39,6 @@ struct drm_gem_object *rockchip_fb_get_gem_obj(struct drm_framebuffer *fb, return rk_fb->obj[plane]; } -EXPORT_SYMBOL_GPL(rockchip_fb_get_gem_obj); static void rockchip_drm_fb_destroy(struct drm_framebuffer *fb) { -- cgit v1.2.3 From c7647f8681feeb6c0957e3cf5daed1fbf8b3a5af Mon Sep 17 00:00:00 2001 From: John Keeping Date: Tue, 12 Jan 2016 18:05:18 +0000 Subject: drm/rockchip: vop: fix mask when updating interrupts Commit dbb3d94 (drm/rockchip: vop: move interrupt registers into vop_data) introduced new macros for updating the interrupt control registers but these always use the mask from the register definition without refining it for the particular bits that are being changed. This means that whenever we enable/disable a particular interrupt we end up disabling all of the others as a side effect. Signed-off-by: John Keeping --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 46c2a8dfd8aa..fd370548d7d7 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -43,8 +43,8 @@ #define REG_SET(x, base, reg, v, mode) \ __REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v) -#define REG_SET_MASK(x, base, reg, v, mode) \ - __REG_SET_##mode(x, base + reg.offset, reg.mask, reg.shift, v) +#define REG_SET_MASK(x, base, reg, mask, v, mode) \ + __REG_SET_##mode(x, base + reg.offset, mask, reg.shift, v) #define VOP_WIN_SET(x, win, name, v) \ REG_SET(x, win->base, win->phy->name, v, RELAXED) @@ -58,16 +58,18 @@ #define VOP_INTR_GET(vop, name) \ vop_read_reg(vop, 0, &vop->data->ctrl->name) -#define VOP_INTR_SET(vop, name, v) \ - REG_SET(vop, 0, vop->data->intr->name, v, NORMAL) +#define VOP_INTR_SET(vop, name, mask, v) \ + REG_SET_MASK(vop, 0, vop->data->intr->name, mask, v, NORMAL) #define VOP_INTR_SET_TYPE(vop, name, type, v) \ do { \ - int i, reg = 0; \ + int i, reg = 0, mask = 0; \ for (i = 0; i < vop->data->intr->nintrs; i++) { \ - if (vop->data->intr->intrs[i] & type) \ + if (vop->data->intr->intrs[i] & type) { \ reg |= (v) << i; \ + mask |= 1 << i; \ + } \ } \ - VOP_INTR_SET(vop, name, reg); \ + VOP_INTR_SET(vop, name, mask, reg); \ } while (0) #define VOP_INTR_GET_TYPE(vop, name, type) \ vop_get_intr_type(vop, &vop->data->intr->name, type) -- cgit v1.2.3 From 484bb6c969523aa547d854bb57104339ee4aa800 Mon Sep 17 00:00:00 2001 From: Andrzej Hajda Date: Thu, 14 Jan 2016 09:59:02 +0100 Subject: drm/rockchip/dsi: fix handling mipi_dsi_pixel_format_to_bpp result The function can return negative value so it should be assigned to signed variable. The problem has been detected using patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci. Signed-off-by: Andrzej Hajda Reviewed-by: Chris Zhong --- drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 7bfe243c6173..f8f8f29fb7c3 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -461,10 +461,11 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi) static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi) { - unsigned int bpp, i, pre; + unsigned int i, pre; unsigned long mpclk, pllref, tmp; unsigned int m = 1, n = 1, target_mbps = 1000; unsigned int max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps; + int bpp; bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); if (bpp < 0) { -- cgit v1.2.3 From 9571e1d84042f5670df9fabdcbe7dd5da3abe43e Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Tue, 19 Jan 2016 17:59:46 +0900 Subject: drm/amdgpu: Use drm_calloc_large for VM page_tables array MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It can be big, depending on the VM address space size, which is tunable via the vm_size module parameter. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93721 Reviewed-by: Christian König Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index aefc668e6b5d..9599f7559b3d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1282,7 +1282,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) { const unsigned align = min(AMDGPU_VM_PTB_ALIGN_SIZE, AMDGPU_VM_PTE_COUNT * 8); - unsigned pd_size, pd_entries, pts_size; + unsigned pd_size, pd_entries; int i, r; for (i = 0; i < AMDGPU_MAX_RINGS; ++i) { @@ -1300,8 +1300,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) pd_entries = amdgpu_vm_num_pdes(adev); /* allocate page table array */ - pts_size = pd_entries * sizeof(struct amdgpu_vm_pt); - vm->page_tables = kzalloc(pts_size, GFP_KERNEL); + vm->page_tables = drm_calloc_large(pd_entries, sizeof(struct amdgpu_vm_pt)); if (vm->page_tables == NULL) { DRM_ERROR("Cannot allocate memory for page table array\n"); return -ENOMEM; @@ -1361,7 +1360,7 @@ void amdgpu_vm_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm) for (i = 0; i < amdgpu_vm_num_pdes(adev); i++) amdgpu_bo_unref(&vm->page_tables[i].entry.robj); - kfree(vm->page_tables); + drm_free_large(vm->page_tables); amdgpu_bo_unref(&vm->page_directory); fence_put(vm->page_directory_fence); -- cgit v1.2.3 From 3466904d38ff1e63f0a19cb31166db67f2d05c61 Mon Sep 17 00:00:00 2001 From: Jordan Lazare Date: Mon, 18 Jan 2016 17:00:03 -0500 Subject: drm/amdgpu: Allow the driver to load if amdgpu.powerplay=1 on asics without powerplay support Avoid setting pp_enabled if there is no powerplay implementation. Signed-off-by: Jordan Lazare Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c index 5ee9a0690278..b9d0d55f6b47 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c @@ -99,13 +99,24 @@ static int amdgpu_pp_early_init(void *handle) #ifdef CONFIG_DRM_AMD_POWERPLAY switch (adev->asic_type) { - case CHIP_TONGA: - case CHIP_FIJI: - adev->pp_enabled = (amdgpu_powerplay > 0) ? true : false; - break; - default: - adev->pp_enabled = (amdgpu_powerplay > 0) ? true : false; - break; + case CHIP_TONGA: + case CHIP_FIJI: + adev->pp_enabled = (amdgpu_powerplay == 0) ? false : true; + break; + case CHIP_CARRIZO: + case CHIP_STONEY: + adev->pp_enabled = (amdgpu_powerplay > 0) ? true : false; + break; + /* These chips don't have powerplay implemenations */ + case CHIP_BONAIRE: + case CHIP_HAWAII: + case CHIP_KABINI: + case CHIP_MULLINS: + case CHIP_KAVERI: + case CHIP_TOPAZ: + default: + adev->pp_enabled = false; + break; } #else adev->pp_enabled = false; -- cgit v1.2.3 From 8483d152db61c5baf5452b844ef65b96ee9a6cfb Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 21 Dec 2015 16:11:44 -0800 Subject: drm/vc4: Remove broken attempt at GPU reset using genpd. I've tested and confirmed that it doesn't actually work. We'll need to sort out how to do this properly later, but for now just remove it since it also caused build breakage due to using CONFIG_PM_SLEEP functions without our Kconfig depending on PM_SLEEP. Signed-off-by: Eric Anholt Acked-by: Sudip Mukherjee --- drivers/gpu/drm/vc4/vc4_v3d.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vc4/vc4_v3d.c b/drivers/gpu/drm/vc4/vc4_v3d.c index 424d515ffcda..314ff71db978 100644 --- a/drivers/gpu/drm/vc4/vc4_v3d.c +++ b/drivers/gpu/drm/vc4/vc4_v3d.c @@ -144,19 +144,16 @@ int vc4_v3d_debugfs_ident(struct seq_file *m, void *unused) } #endif /* CONFIG_DEBUG_FS */ -/* - * Asks the firmware to turn on power to the V3D engine. - * - * This may be doable with just the clocks interface, though this - * packet does some other register setup from the firmware, too. - */ int vc4_v3d_set_power(struct vc4_dev *vc4, bool on) { - if (on) - return pm_generic_poweroff(&vc4->v3d->pdev->dev); - else - return pm_generic_resume(&vc4->v3d->pdev->dev); + /* XXX: This interface is needed for GPU reset, and the way to + * do it is to turn our power domain off and back on. We + * can't just reset from within the driver, because the reset + * bits are in the power domain's register area, and get set + * during the poweron process. + */ + return 0; } static void vc4_v3d_init_hw(struct drm_device *dev) -- cgit v1.2.3 From c240906d36653944d5c049df7ce667a7e8bea6ac Mon Sep 17 00:00:00 2001 From: John Keeping Date: Tue, 19 Jan 2016 10:46:58 +0000 Subject: drm/atomic-helper: Export framebuffer_changed() The Rockchip driver cannot use drm_atomic_helper_wait_for_vblanks() because it has hardware counters for neither vblanks nor scanlines. In order to simplify re-implementing the functionality for this driver, export the framebuffer_changed() helper so it can be reused. Signed-off-by: John Keeping Reviewed-by: Daniel Vetter --- drivers/gpu/drm/drm_atomic_helper.c | 24 ++++++++++++++++++++---- include/drm/drm_atomic_helper.h | 4 ++++ 2 files changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 57cccd68ca52..7c523060a076 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -946,9 +946,23 @@ static void wait_for_fences(struct drm_device *dev, } } -static bool framebuffer_changed(struct drm_device *dev, - struct drm_atomic_state *old_state, - struct drm_crtc *crtc) +/** + * drm_atomic_helper_framebuffer_changed - check if framebuffer has changed + * @dev: DRM device + * @old_state: atomic state object with old state structures + * @crtc: DRM crtc + * + * Checks whether the framebuffer used for this CRTC changes as a result of + * the atomic update. This is useful for drivers which cannot use + * drm_atomic_helper_wait_for_vblanks() and need to reimplement its + * functionality. + * + * Returns: + * true if the framebuffer changed. + */ +bool drm_atomic_helper_framebuffer_changed(struct drm_device *dev, + struct drm_atomic_state *old_state, + struct drm_crtc *crtc) { struct drm_plane *plane; struct drm_plane_state *old_plane_state; @@ -965,6 +979,7 @@ static bool framebuffer_changed(struct drm_device *dev, return false; } +EXPORT_SYMBOL(drm_atomic_helper_framebuffer_changed); /** * drm_atomic_helper_wait_for_vblanks - wait for vblank on crtcs @@ -999,7 +1014,8 @@ drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, if (old_state->legacy_cursor_update) continue; - if (!framebuffer_changed(dev, old_state, crtc)) + if (!drm_atomic_helper_framebuffer_changed(dev, + old_state, crtc)) continue; ret = drm_crtc_vblank_get(crtc); diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 89d008dc08e2..fe5efada9d68 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -42,6 +42,10 @@ int drm_atomic_helper_commit(struct drm_device *dev, struct drm_atomic_state *state, bool async); +bool drm_atomic_helper_framebuffer_changed(struct drm_device *dev, + struct drm_atomic_state *old_state, + struct drm_crtc *crtc); + void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, struct drm_atomic_state *old_state); -- cgit v1.2.3 From f2227f469782e55765deacb8ebcc7ec05fe04013 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Tue, 19 Jan 2016 10:46:59 +0000 Subject: drm/rockchip: don't wait for vblank if fb hasn't changed As commented in drm_atomic_helper_wait_for_vblanks(), userspace relies on cursor ioctls being unsynced. Converting the rockchip driver to atomic has significantly impacted cursor performance by making every cursor update wait for vblank. By skipping the vblank sync when the framebuffer has not changed (as is done in drm_atomic_helper_wait_for_vblanks()) we can avoid this for the common case of moving the cursor and only need to delay the cursor ioctl when the cursor icon changes. We cannot add the check on legacy_cursor_update since that results in the cursor bo being unreferenced while the hardware may still be reading it. Fully supporting unsynced cursor updates is left for the future when the atomic helper framework supports async updates. Signed-off-by: John Keeping Tested-by: Heiko Stuebner --- drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c index dd1f8d3c98d8..87c77c4b5e50 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c @@ -177,7 +177,7 @@ static void rockchip_crtc_wait_for_update(struct drm_crtc *crtc) } static void -rockchip_atomic_wait_for_complete(struct drm_atomic_state *old_state) +rockchip_atomic_wait_for_complete(struct drm_device *dev, struct drm_atomic_state *old_state) { struct drm_crtc_state *old_crtc_state; struct drm_crtc *crtc; @@ -193,6 +193,10 @@ rockchip_atomic_wait_for_complete(struct drm_atomic_state *old_state) if (!crtc->state->active) continue; + if (!drm_atomic_helper_framebuffer_changed(dev, + old_state, crtc)) + continue; + ret = drm_crtc_vblank_get(crtc); if (ret != 0) continue; @@ -240,7 +244,7 @@ rockchip_atomic_commit_complete(struct rockchip_atomic_commit *commit) drm_atomic_helper_commit_planes(dev, state, true); - rockchip_atomic_wait_for_complete(state); + rockchip_atomic_wait_for_complete(dev, state); drm_atomic_helper_cleanup_planes(dev, state); -- cgit v1.2.3 From c9ad1d9946e849ac3d8821d91e136d7fd728dec5 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Tue, 19 Jan 2016 10:47:00 +0000 Subject: drm/rockchip: explain why we can't wait_for_vblanks Signed-off-by: John Keeping --- drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c index 87c77c4b5e50..3b8f652698f8 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_fb.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fb.c @@ -176,6 +176,21 @@ static void rockchip_crtc_wait_for_update(struct drm_crtc *crtc) crtc_funcs->wait_for_update(crtc); } +/* + * We can't use drm_atomic_helper_wait_for_vblanks() because rk3288 and rk3066 + * have hardware counters for neither vblanks nor scanlines, which results in + * a race where: + * | <-- HW vsync irq and reg take effect + * plane_commit --> | + * get_vblank and wait --> | + * | <-- handle_vblank, vblank->count + 1 + * cleanup_fb --> | + * iommu crash --> | + * | <-- HW vsync irq and reg take effect + * + * This function is equivalent but uses rockchip_crtc_wait_for_update() instead + * of waiting for vblank_count to change. + */ static void rockchip_atomic_wait_for_complete(struct drm_device *dev, struct drm_atomic_state *old_state) { -- cgit v1.2.3 From fb7a6ae7554f15b5b0b7f31b02ed4ef40a8c2eb6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Jan 2016 14:39:08 +0100 Subject: hisi_sas: SCSI_HISI_SAS should depend on HAS_DMA If NO_DMA=y: ERROR: "dma_map_sg" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined! ERROR: "dma_pool_alloc" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined! ERROR: "dma_unmap_sg" [drivers/scsi/hisi_sas/hisi_sas_v1_hw.ko] undefined! ERROR: "dma_unmap_sg" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_set_mask" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_map_sg" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_pool_destroy" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_free_coherent" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_pool_free" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_alloc_coherent" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_pool_alloc" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_supported" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! ERROR: "dma_pool_create" [drivers/scsi/hisi_sas/hisi_sas_main.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Reviewed-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig index 37a0c7156087..2c05021636a5 100644 --- a/drivers/scsi/hisi_sas/Kconfig +++ b/drivers/scsi/hisi_sas/Kconfig @@ -1,5 +1,6 @@ config SCSI_HISI_SAS tristate "HiSilicon SAS" + depends on HAS_DMA select SCSI_SAS_LIBSAS select BLK_DEV_INTEGRITY help -- cgit v1.2.3 From c142ce0d3c6b070c248cef4bbe3a0f58cfd61f3f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 15 Jan 2016 14:39:09 +0100 Subject: hisi_sas: Restrict SCSI_HISI_SAS to arm64 The HiSilicon SAS HBA is available in HiSilicon arm64 SoCs only. Restrict it to arm64, unless compile-testing. Signed-off-by: Geert Uytterhoeven Reviewed-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig index 2c05021636a5..b67661836c9f 100644 --- a/drivers/scsi/hisi_sas/Kconfig +++ b/drivers/scsi/hisi_sas/Kconfig @@ -1,6 +1,7 @@ config SCSI_HISI_SAS tristate "HiSilicon SAS" depends on HAS_DMA + depends on ARM64 || COMPILE_TEST select SCSI_SAS_LIBSAS select BLK_DEV_INTEGRITY help -- cgit v1.2.3 From d0eb20a863ba7dc1d3f4b841639671f134560be2 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 20 Jan 2016 11:01:23 -0500 Subject: sd: Optimal I/O size is in bytes, not sectors Commit ca369d51b3e1 ("block/sd: Fix device-imposed transfer length limits") accidentally switched optimal I/O size reporting from bytes to block layer sectors. Signed-off-by: Martin K. Petersen Reported-by: Christian Borntraeger Tested-by: Christian Borntraeger Fixes: ca369d51b3e1649be4a72addd6d6a168cfb3f537 Cc: stable@vger.kernel.org # 4.4+ Reviewed-by: James E.J. Bottomley Reviewed-by: Ewan D. Milne Reviewed-by: Matthew R. Ochs --- drivers/scsi/sd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 4e08d1cd704d..ec163d08f6c3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2893,7 +2893,7 @@ static int sd_revalidate_disk(struct gendisk *disk) sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS && sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_CACHE_SIZE) rw_max = q->limits.io_opt = - logical_to_sectors(sdp, sdkp->opt_xfer_blocks); + sdkp->opt_xfer_blocks * sdp->sector_size; else rw_max = BLK_DEF_MAX_SECTORS; -- cgit v1.2.3 From e3c4abdb3bc9b76bedd416ecc5c27633a2f8afed Mon Sep 17 00:00:00 2001 From: Mark Yao Date: Wed, 23 Sep 2015 12:34:34 +0800 Subject: drm/rockchip: fix wrong pitch/size using on gem args->pitch and args->size may not be set by userspace, sometimes userspace only malloc args and not memset args to zero, then args->pitch and args->size is random, it is very danger to use pitch/size on gem. pitch's type is u32, and min_pitch's type is int, example, pitch is 0xffffffff, then pitch < min_pitch return true, then gem will alloc very very big bufffer, it would eat all the memory and cause kernel crash. Stop using pitch/size from args, calc them from other args. Signed-off-by: Mark Yao --- drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c index d908321b94ce..18e07338c6e5 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c @@ -234,13 +234,8 @@ int rockchip_gem_dumb_create(struct drm_file *file_priv, /* * align to 64 bytes since Mali requires it. */ - min_pitch = ALIGN(min_pitch, 64); - - if (args->pitch < min_pitch) - args->pitch = min_pitch; - - if (args->size < args->pitch * args->height) - args->size = args->pitch * args->height; + args->pitch = ALIGN(min_pitch, 64); + args->size = args->pitch * args->height; rk_obj = rockchip_gem_create_with_handle(file_priv, dev, args->size, &args->handle); -- cgit v1.2.3 From f0442df2156a2171e40f1643c60103e6333f4e7e Mon Sep 17 00:00:00 2001 From: John Keeping Date: Thu, 21 Jan 2016 18:19:34 +0000 Subject: drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATION If DRM_FBDEV_EMULATION is not selected in the config then we can save a bit of space by not including the framebuffer code. Signed-off-by: John Keeping --- drivers/gpu/drm/rockchip/Makefile | 3 ++- drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h | 11 +++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile index a4e03bcde035..f6a809afceec 100644 --- a/drivers/gpu/drm/rockchip/Makefile +++ b/drivers/gpu/drm/rockchip/Makefile @@ -2,8 +2,9 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \ +rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o \ rockchip_drm_gem.o rockchip_drm_vop.o +rockchipdrm-$(CONFIG_DRM_FBDEV_EMULATION) += rockchip_drm_fbdev.o obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h index 50432e9b5b37..73718c5f5bbf 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h @@ -15,7 +15,18 @@ #ifndef _ROCKCHIP_DRM_FBDEV_H #define _ROCKCHIP_DRM_FBDEV_H +#ifdef CONFIG_DRM_FBDEV_EMULATION int rockchip_drm_fbdev_init(struct drm_device *dev); void rockchip_drm_fbdev_fini(struct drm_device *dev); +#else +static inline int rockchip_drm_fbdev_init(struct drm_device *dev) +{ + return 0; +} + +static inline void rockchip_drm_fbdev_fini(struct drm_device *dev) +{ +} +#endif #endif /* _ROCKCHIP_DRM_FBDEV_H */ -- cgit v1.2.3 From 0106ef5146f9e89e4dc9354f308ecaddb9617310 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 20 Jan 2016 10:13:42 +0100 Subject: PM / domains: fix lockdep issue for all subdomains During genpd_poweron, genpd->lock is acquired recursively for each parent (master) domain, which are separate objects. This confuses lockdep, which considers every operation on genpd->lock as being done on the same lock class. This leads to the following false positive warning: ============================================= [ INFO: possible recursive locking detected ] 4.4.0-rc4-xu3s #32 Not tainted --------------------------------------------- swapper/0/1 is trying to acquire lock: (&genpd->lock){+.+...}, at: [] __genpd_poweron+0x64/0x108 but task is already holding lock: (&genpd->lock){+.+...}, at: [] genpd_dev_pm_attach+0x168/0x1b8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&genpd->lock); lock(&genpd->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: (&dev->mutex){......}, at: [] __driver_attach+0x48/0x98 #1: (&dev->mutex){......}, at: [] __driver_attach+0x58/0x98 #2: (&genpd->lock){+.+...}, at: [] genpd_dev_pm_attach+0x168/0x1b8 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-rc4-xu3s #32 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x84/0xc4) [] (dump_stack) from [] (__lock_acquire+0x1f88/0x215c) [] (__lock_acquire) from [] (lock_acquire+0xa4/0xd0) [] (lock_acquire) from [] (mutex_lock_nested+0x70/0x4d4) [] (mutex_lock_nested) from [] (__genpd_poweron+0x64/0x108) [] (__genpd_poweron) from [] (genpd_dev_pm_attach+0x170/0x1b8) [] (genpd_dev_pm_attach) from [] (platform_drv_probe+0x2c/0xac) [] (platform_drv_probe) from [] (driver_probe_device+0x208/0x2fc) [] (driver_probe_device) from [] (__driver_attach+0x94/0x98) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (exynos_drm_register_drivers+0x28/0x74) [] (exynos_drm_register_drivers) from [] (exynos_drm_init+0x6c/0xc4) [] (exynos_drm_init) from [] (do_one_initcall+0x90/0x1dc) [] (do_one_initcall) from [] (kernel_init_freeable+0x158/0x1f8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xe8) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) This patch replaces mutex_lock with mutex_lock_nested() and uses recursion depth to annotate each genpd->lock operation with separate lockdep subclass. Reported-by: Anand Moon Signed-off-by: Marek Szyprowski Tested-by: Anand Moon Tested-by: Tobias Jakobi Acked-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index b80379012840..e02ddf65bc43 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -170,16 +170,15 @@ static void genpd_queue_power_off_work(struct generic_pm_domain *genpd) queue_work(pm_wq, &genpd->power_off_work); } -static int genpd_poweron(struct generic_pm_domain *genpd); - /** * __genpd_poweron - Restore power to a given PM domain and its masters. * @genpd: PM domain to power up. + * @depth: nesting count for lockdep. * * Restore power to @genpd and all of its masters so that it is possible to * resume a device belonging to it. */ -static int __genpd_poweron(struct generic_pm_domain *genpd) +static int __genpd_poweron(struct generic_pm_domain *genpd, unsigned int depth) { struct gpd_link *link; int ret = 0; @@ -194,11 +193,16 @@ static int __genpd_poweron(struct generic_pm_domain *genpd) * with it. */ list_for_each_entry(link, &genpd->slave_links, slave_node) { - genpd_sd_counter_inc(link->master); + struct generic_pm_domain *master = link->master; + + genpd_sd_counter_inc(master); + + mutex_lock_nested(&master->lock, depth + 1); + ret = __genpd_poweron(master, depth + 1); + mutex_unlock(&master->lock); - ret = genpd_poweron(link->master); if (ret) { - genpd_sd_counter_dec(link->master); + genpd_sd_counter_dec(master); goto err; } } @@ -230,11 +234,12 @@ static int genpd_poweron(struct generic_pm_domain *genpd) int ret; mutex_lock(&genpd->lock); - ret = __genpd_poweron(genpd); + ret = __genpd_poweron(genpd, 0); mutex_unlock(&genpd->lock); return ret; } + static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev) { return GENPD_DEV_CALLBACK(genpd, int, save_state, dev); @@ -482,7 +487,7 @@ static int pm_genpd_runtime_resume(struct device *dev) } mutex_lock(&genpd->lock); - ret = __genpd_poweron(genpd); + ret = __genpd_poweron(genpd, 0); mutex_unlock(&genpd->lock); if (ret) -- cgit v1.2.3 From 6f16886b7c050c934305b1f285c3458ff1b6e4e4 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 21 Jan 2016 11:19:29 +0000 Subject: cpuidle: fix fallback mechanism for suspend to idle in absence of enter_freeze Commit 51164251f5c3 "sched / idle: Drop default_idle_call() fallback from call_cpuidle()" made find_deepest_state() return non-negative value and check all the states with index > 0. Also as a result, find_deepest_state() returns 0 even when enter_freeze callbacks are not implemented and enter_freeze_proper() is called which ends up crashing the kernel. This patch updates the check for index > 0 in cpuidle_enter_freeze and cpuidle_idle_call(when idle_should_freeze is true) to restore the suspend-to-idle functionality in absence of enter_freeze callback. Fixes: 51164251f5c3 "sched / idle: Drop default_idle_call() fallback from call_cpuidle()" Signed-off-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/cpuidle.c | 2 +- kernel/sched/idle.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 046423b0c5ca..f996efc56605 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -153,7 +153,7 @@ int cpuidle_enter_freeze(struct cpuidle_driver *drv, struct cpuidle_device *dev) * be frozen safely. */ index = find_deepest_state(drv, dev, UINT_MAX, 0, true); - if (index >= 0) + if (index > 0) enter_freeze_proper(drv, dev, index); return index; diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c index 34852ee70d54..30f7b6ad3920 100644 --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -162,7 +162,7 @@ static void cpuidle_idle_call(void) */ if (idle_should_freeze()) { entered_state = cpuidle_enter_freeze(drv, dev); - if (entered_state >= 0) { + if (entered_state > 0) { local_irq_enable(); goto exit_idle; } -- cgit v1.2.3 From 4b5ece24ce564176f8ad786ad02b681a373bc615 Mon Sep 17 00:00:00 2001 From: Eric Huang Date: Tue, 19 Jan 2016 14:28:56 -0500 Subject: drm/amd/amdgpu: Improve amdgpu_dpm* macros to avoid unexpected result (v2) The two macros returns are values which probably are used in the expression of calculation. Without the brackets the result of the expression may be wrong. v2: agd: squash both patches together Reviewed-by: Alex Deucher Signed-off-by: Eric Huang --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 44 ++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 313b0cc8d676..82edf95b7740 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -2278,60 +2278,60 @@ amdgpu_get_sdma_instance(struct amdgpu_ring *ring) #define amdgpu_dpm_enable_bapm(adev, e) (adev)->pm.funcs->enable_bapm((adev), (e)) #define amdgpu_dpm_get_temperature(adev) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->get_temperature((adev)->powerplay.pp_handle) : \ - (adev)->pm.funcs->get_temperature((adev)) + (adev)->pm.funcs->get_temperature((adev))) #define amdgpu_dpm_set_fan_control_mode(adev, m) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->set_fan_control_mode((adev)->powerplay.pp_handle, (m)) : \ - (adev)->pm.funcs->set_fan_control_mode((adev), (m)) + (adev)->pm.funcs->set_fan_control_mode((adev), (m))) #define amdgpu_dpm_get_fan_control_mode(adev) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->get_fan_control_mode((adev)->powerplay.pp_handle) : \ - (adev)->pm.funcs->get_fan_control_mode((adev)) + (adev)->pm.funcs->get_fan_control_mode((adev))) #define amdgpu_dpm_set_fan_speed_percent(adev, s) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->set_fan_speed_percent((adev)->powerplay.pp_handle, (s)) : \ - (adev)->pm.funcs->set_fan_speed_percent((adev), (s)) + (adev)->pm.funcs->set_fan_speed_percent((adev), (s))) #define amdgpu_dpm_get_fan_speed_percent(adev, s) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->get_fan_speed_percent((adev)->powerplay.pp_handle, (s)) : \ - (adev)->pm.funcs->get_fan_speed_percent((adev), (s)) + (adev)->pm.funcs->get_fan_speed_percent((adev), (s))) #define amdgpu_dpm_get_sclk(adev, l) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->get_sclk((adev)->powerplay.pp_handle, (l)) : \ - (adev)->pm.funcs->get_sclk((adev), (l)) + (adev)->pm.funcs->get_sclk((adev), (l))) #define amdgpu_dpm_get_mclk(adev, l) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->get_mclk((adev)->powerplay.pp_handle, (l)) : \ - (adev)->pm.funcs->get_mclk((adev), (l)) + (adev)->pm.funcs->get_mclk((adev), (l))) #define amdgpu_dpm_force_performance_level(adev, l) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->force_performance_level((adev)->powerplay.pp_handle, (l)) : \ - (adev)->pm.funcs->force_performance_level((adev), (l)) + (adev)->pm.funcs->force_performance_level((adev), (l))) #define amdgpu_dpm_powergate_uvd(adev, g) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->powergate_uvd((adev)->powerplay.pp_handle, (g)) : \ - (adev)->pm.funcs->powergate_uvd((adev), (g)) + (adev)->pm.funcs->powergate_uvd((adev), (g))) #define amdgpu_dpm_powergate_vce(adev, g) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->powergate_vce((adev)->powerplay.pp_handle, (g)) : \ - (adev)->pm.funcs->powergate_vce((adev), (g)) + (adev)->pm.funcs->powergate_vce((adev), (g))) #define amdgpu_dpm_debugfs_print_current_performance_level(adev, m) \ - (adev)->pp_enabled ? \ + ((adev)->pp_enabled ? \ (adev)->powerplay.pp_funcs->print_current_performance_level((adev)->powerplay.pp_handle, (m)) : \ - (adev)->pm.funcs->debugfs_print_current_performance_level((adev), (m)) + (adev)->pm.funcs->debugfs_print_current_performance_level((adev), (m))) #define amdgpu_dpm_get_current_power_state(adev) \ (adev)->powerplay.pp_funcs->get_current_power_state((adev)->powerplay.pp_handle) -- cgit v1.2.3 From 78d0e182b6c1f5336f6e8cbb197f403276dabc7f Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 19 Jan 2016 12:48:14 +0100 Subject: drm/amdgpu: fix amdgpu_bo_pin_restricted VRAM placing v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We could pin BOs into invisible VRAM otherwise. v2: make logic more readable as suggested by Michel Cc: stable@vger.kernel.org Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Reviewed-by: Rex Zhu (v1) Reviewed-by: Michel Dänzer --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index c3ce103b6a33..a2a16acee34d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -399,7 +399,8 @@ int amdgpu_bo_pin_restricted(struct amdgpu_bo *bo, u32 domain, } if (fpfn > bo->placements[i].fpfn) bo->placements[i].fpfn = fpfn; - if (lpfn && lpfn < bo->placements[i].lpfn) + if (!bo->placements[i].lpfn || + (lpfn && lpfn < bo->placements[i].lpfn)) bo->placements[i].lpfn = lpfn; bo->placements[i].flags |= TTM_PL_FLAG_NO_EVICT; } -- cgit v1.2.3 From 9441f964f8e39374ab175e0a8fe870e1a2f02af1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 20 Jan 2016 12:15:09 -0500 Subject: drm/amdgpu: add a message to indicate when powerplay is enabled (v2) Makes it clear to the user which power management path is in use. v2: make consistent with dpm Reviewed-by: Rex Zhu Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c index 8f5d5edcf193..aa67244a77ae 100644 --- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c +++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c @@ -64,6 +64,11 @@ static int pp_sw_init(void *handle) if (ret == 0) ret = hwmgr->hwmgr_func->backend_init(hwmgr); + if (ret) + printk("amdgpu: powerplay initialization failed\n"); + else + printk("amdgpu: powerplay initialized\n"); + return ret; } -- cgit v1.2.3 From cc78eb22885bba64445cde438ba098de0104920f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 22 Jan 2016 00:13:15 -0500 Subject: drm/radeon: properly byte swap vce firmware setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Firmware is LE. Need to properly byteswap some of the fields so they are interpreted correctly by the driver on BE systems. Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/vce_v1_0.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/vce_v1_0.c b/drivers/gpu/drm/radeon/vce_v1_0.c index 07a0d378e122..a01efe39a820 100644 --- a/drivers/gpu/drm/radeon/vce_v1_0.c +++ b/drivers/gpu/drm/radeon/vce_v1_0.c @@ -178,12 +178,12 @@ int vce_v1_0_load_fw(struct radeon_device *rdev, uint32_t *data) return -EINVAL; } - for (i = 0; i < sign->num; ++i) { - if (sign->val[i].chip_id == chip_id) + for (i = 0; i < le32_to_cpu(sign->num); ++i) { + if (le32_to_cpu(sign->val[i].chip_id) == chip_id) break; } - if (i == sign->num) + if (i == le32_to_cpu(sign->num)) return -EINVAL; data += (256 - 64) / 4; @@ -191,18 +191,18 @@ int vce_v1_0_load_fw(struct radeon_device *rdev, uint32_t *data) data[1] = sign->val[i].nonce[1]; data[2] = sign->val[i].nonce[2]; data[3] = sign->val[i].nonce[3]; - data[4] = sign->len + 64; + data[4] = cpu_to_le32(le32_to_cpu(sign->len) + 64); memset(&data[5], 0, 44); memcpy(&data[16], &sign[1], rdev->vce_fw->size - sizeof(*sign)); - data += data[4] / 4; + data += le32_to_cpu(data[4]) / 4; data[0] = sign->val[i].sigval[0]; data[1] = sign->val[i].sigval[1]; data[2] = sign->val[i].sigval[2]; data[3] = sign->val[i].sigval[3]; - rdev->vce.keyselect = sign->val[i].keyselect; + rdev->vce.keyselect = le32_to_cpu(sign->val[i].keyselect); return 0; } -- cgit v1.2.3 From 41f2d9905646b1cd4be5852b273c06b6a6d23a80 Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 21 Jan 2016 12:56:52 +0100 Subject: drm/amdgpu: fix next_rptr handling for debugfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit That somehow got lost. Signed-off-by: Christian König Reviewed-by: Chunming Zhou Acked-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c index 78e9b0f14661..d1f234dd2126 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c @@ -487,7 +487,7 @@ static int amdgpu_debugfs_ring_info(struct seq_file *m, void *data) seq_printf(m, "rptr: 0x%08x [%5d]\n", rptr, rptr); - rptr_next = ~0; + rptr_next = le32_to_cpu(*ring->next_rptr_cpu_addr); seq_printf(m, "driver's copy of the wptr: 0x%08x [%5d]\n", ring->wptr, ring->wptr); -- cgit v1.2.3 From b186b4dcb79b1914c3dadb27ac72dafaa4267998 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 22 Jan 2016 11:41:05 +0100 Subject: ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" The quirk to get "acpi_backlight=vendor" behavior by default on the Dell Inspiron 5737 was added before we started doing "acpi_backlight=native" by default on Win8 ready machines. Since we now avoid using acpi-video as backlight driver on these machines by default (using the native driver instead) we no longer need this quirk. Moreover the vendor driver does not work after a suspend/resume where as the native driver does. This reverts commit 08a56226d847 (ACPI / video: Add Dell Inspiron 5737 to the blacklist). Link: https://bugzilla.kernel.org/show_bug.cgi?id=111061 Cc: 3.19+ # 3.19+ Reported-and-tested-by: erusan@gmail.com Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video_detect.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 90e2d54be526..1316ddd92fac 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -135,14 +135,6 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), }, }, - { - .callback = video_detect_force_vendor, - .ident = "Dell Inspiron 5737", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"), - }, - }, /* * These models have a working acpi_video backlight control, and using -- cgit v1.2.3 From 2c3033a0664dfae91e1dee7fabac10f24354b958 Mon Sep 17 00:00:00 2001 From: Insu Yun Date: Sat, 23 Jan 2016 15:44:19 -0500 Subject: ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot() In acpiphp_enable_slot(), there is a missing unlock path when error occurred. It needs to be unlocked before returning an error. Signed-off-by: Insu Yun Cc: All applicable Signed-off-by: Rafael J. Wysocki --- drivers/pci/hotplug/acpiphp_glue.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index ff538568a617..0b3e0bfa7be5 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -953,8 +953,10 @@ int acpiphp_enable_slot(struct acpiphp_slot *slot) { pci_lock_rescan_remove(); - if (slot->flags & SLOT_IS_GOING_AWAY) + if (slot->flags & SLOT_IS_GOING_AWAY) { + pci_unlock_rescan_remove(); return -ENODEV; + } /* configure all functions */ if (!(slot->flags & SLOT_ENABLED)) -- cgit v1.2.3 From 6220f4ebd7b4db499238c2dc91268a9c473fd01c Mon Sep 17 00:00:00 2001 From: Thorsten Leemhuis Date: Sun, 17 Jan 2016 16:03:04 +0100 Subject: hwmon: (dell-smm) Blacklist Dell Studio XPS 8000 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since Linux 4.0 the CPU fan speed is going up and down on Dell Studio XPS 8000 and 8100 for unknown reasons. The 8100 was already blacklisted in commit a4b45b25f18d ("hwmon: (dell-smm) Blacklist Dell Studio XPS 8100"). This patch blacklists the XPS 8000. Without further debugging on the affected machine, it is not possible to find the problem. For more details see https://bugzilla.kernel.org/show_bug.cgi?id=100121 Signed-off-by: Thorsten Leemhuis Acked-by: Pali Rohár Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck --- drivers/hwmon/dell-smm-hwmon.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index c8487894b312..c43318d3416e 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -930,6 +930,17 @@ static struct dmi_system_id i8k_dmi_table[] __initdata = { MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); static struct dmi_system_id i8k_blacklist_dmi_table[] __initdata = { + { + /* + * CPU fan speed going up and down on Dell Studio XPS 8000 + * for unknown reasons. + */ + .ident = "Dell Studio XPS 8000", + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8000"), + }, + }, { /* * CPU fan speed going up and down on Dell Studio XPS 8100 -- cgit v1.2.3 From 19454462acb1bdef80542061bdc9b410e4ed1ff6 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 30 Dec 2015 12:59:08 +0800 Subject: usb: cdc-acm: handle unlinked urb in acm read callback In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang Signed-off-by: Lu Baolu Cc: stable@vger.kernel.org Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 26ca4f910cb0..8cd193bbd044 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -428,7 +428,8 @@ static void acm_read_bulk_callback(struct urb *urb) set_bit(rb->index, &acm->read_urbs_free); dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n", __func__, status); - return; + if ((status != -ENOENT) || (urb->actual_length == 0)) + return; } usb_mark_last_busy(acm->dev); -- cgit v1.2.3 From ffdb1e369a73b380fce95b05f8498d92c43842b4 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Wed, 6 Jan 2016 15:10:04 +0800 Subject: usb: cdc-acm: send zero packet for intel 7260 modem For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski Signed-off-by: Lu Baolu Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 6 ++++++ drivers/usb/class/cdc-acm.h | 1 + 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 8cd193bbd044..e4c70dce3e7c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1405,6 +1405,8 @@ made_compressed_probe: usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, snd); snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + if (quirks & SEND_ZERO_PACKET) + snd->urb->transfer_flags |= URB_ZERO_PACKET; snd->instance = acm; } @@ -1862,6 +1864,10 @@ static const struct usb_device_id acm_ids[] = { { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_ACM_PROTO_AT_CDMA) }, + { USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */ + .driver_info = SEND_ZERO_PACKET, + }, + { } }; diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index dd9af38e7cda..ccfaba9ab4e4 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -134,3 +134,4 @@ struct acm { #define IGNORE_DEVICE BIT(5) #define QUIRK_CONTROL_LINE_STATE BIT(6) #define CLEAR_HALT_CONDITIONS BIT(7) +#define SEND_ZERO_PACKET BIT(8) -- cgit v1.2.3 From e912e685f372ab62a2405a1acd923597f524e94a Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 18 Jan 2016 15:45:18 +0100 Subject: cdc-acm:exclude Samsung phone 04e8:685d This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e4c70dce3e7c..fa4e23930614 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1841,6 +1841,11 @@ static const struct usb_device_id acm_ids[] = { }, #endif + /*Samsung phone in firmware update mode */ + { USB_DEVICE(0x04e8, 0x685d), + .driver_info = IGNORE_DEVICE, + }, + /* Exclude Infineon Flash Loader utility */ { USB_DEVICE(0x058b, 0x0041), .driver_info = IGNORE_DEVICE, -- cgit v1.2.3 From d8f00cd685f5c8e0def8593e520a7fef12c22407 Mon Sep 17 00:00:00 2001 From: "Du, Changbin" Date: Mon, 18 Jan 2016 21:02:42 +0800 Subject: usb: hub: do not clear BOS field during reset device In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [] usb_enable_link_state+0x2d/0x2f0 Call Trace: [] ? usb_set_lpm_timeout+0x12b/0x140 [] usb_enable_lpm+0x81/0xa0 [] usb_disable_lpm+0xa8/0xc0 [] usb_unlocked_disable_lpm+0x2c/0x50 [] usb_reset_and_verify_device+0xc3/0x710 [] ? usb_sg_wait+0x13d/0x190 [] usb_reset_device+0x133/0x280 [] usb_stor_port_reset+0x61/0x70 [] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 51b436918f78..350dcd9af5d8 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5401,7 +5401,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } bos = udev->bos; - udev->bos = NULL; for (i = 0; i < SET_CONFIG_TRIES; ++i) { @@ -5494,8 +5493,11 @@ done: usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); - usb_release_bos_descriptor(udev); - udev->bos = bos; + /* release the new BOS descriptor allocated by hub_port_init() */ + if (udev->bos != bos) { + usb_release_bos_descriptor(udev); + udev->bos = bos; + } return 0; re_enumerate: -- cgit v1.2.3 From f487c54ddd544e1c9172cd510954f697b77b76e3 Mon Sep 17 00:00:00 2001 From: Peter Dedecker Date: Fri, 8 Jan 2016 12:34:41 +0100 Subject: USB: cp210x: add ID for IAI USB to RS485 adaptor Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 9b90ad747d87..987813b8a7f9 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -99,6 +99,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ -- cgit v1.2.3 From cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 12 Jan 2016 12:05:20 +0100 Subject: USB: visor: fix null-deref at probe Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/visor.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 60afb39eb73c..c53fbb3e0b8c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -544,6 +544,11 @@ static int treo_attach(struct usb_serial *serial) (serial->num_interrupt_in == 0)) return 0; + if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + /* * It appears that Treos and Kyoceras want to use the * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, -- cgit v1.2.3 From cb3232138e37129e88240a98a1d2aba2187ff57c Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Tue, 12 Jan 2016 15:10:50 +0100 Subject: USB: serial: visor: fix crash on detecting device without write_urbs The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg Signed-off-by: Vladis Dronov Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/visor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index c53fbb3e0b8c..337a0be89fcf 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -602,8 +602,10 @@ static int clie_5_attach(struct usb_serial *serial) */ /* some sanity check */ - if (serial->num_ports < 2) - return -1; + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk out endpoints\n"); + return -ENODEV; + } /* port 0 now uses the modified endpoint Address */ port = serial->port[0]; -- cgit v1.2.3 From ff4e2494dc17b173468e1713fdf6237fd8578bc7 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Tue, 12 Jan 2016 17:22:06 +0100 Subject: USB: serial: option: Adding support for Telit LE922 This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f2280606b73c..75350fc550a1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -268,6 +268,8 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 #define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE922_USBCFG0 0x1042 +#define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 @@ -615,6 +617,16 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { + .sendsetup = BIT(2), + .reserved = BIT(0) | BIT(1) | BIT(3), +}; + +static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(2) | BIT(3), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1160,6 +1172,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), -- cgit v1.2.3 From e03cdf22a2727c60307be6a729233edab3bfda9c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 19 Jan 2016 23:43:13 -0800 Subject: USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a5a0376bbd48..8c660ae401d8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -824,6 +824,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, /* Papouch devices based on FTDI chip */ diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 67c6d4469730..a84df2513994 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -615,6 +615,7 @@ */ #define RATOC_VENDOR_ID 0x0584 #define RATOC_PRODUCT_ID_USB60F 0xb020 +#define RATOC_PRODUCT_ID_SCU18 0xb03a /* * Infineon Technologies -- cgit v1.2.3 From 028635d6b5b42de0e0fe5f5c92e1b99868e81a29 Mon Sep 17 00:00:00 2001 From: Mathieu OTHACEHE Date: Mon, 4 Jan 2016 19:49:36 +0100 Subject: USB: mxu11x0: fix memory leak on usb_serial private data On nominal execution, private data allocated on port_probe and attach are never freed. Add port_remove and release callbacks to free them respectively. Signed-off-by: Mathieu OTHACEHE Signed-off-by: Johan Hovold --- drivers/usb/serial/mxu11x0.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c index e3c3f57c2d82..619607323bfd 100644 --- a/drivers/usb/serial/mxu11x0.c +++ b/drivers/usb/serial/mxu11x0.c @@ -368,6 +368,16 @@ static int mxu1_port_probe(struct usb_serial_port *port) return 0; } +static int mxu1_port_remove(struct usb_serial_port *port) +{ + struct mxu1_port *mxport; + + mxport = usb_get_serial_port_data(port); + kfree(mxport); + + return 0; +} + static int mxu1_startup(struct usb_serial *serial) { struct mxu1_device *mxdev; @@ -427,6 +437,14 @@ err_free_mxdev: return err; } +static void mxu1_release(struct usb_serial *serial) +{ + struct mxu1_device *mxdev; + + mxdev = usb_get_serial_data(serial); + kfree(mxdev); +} + static int mxu1_write_byte(struct usb_serial_port *port, u32 addr, u8 mask, u8 byte) { @@ -957,7 +975,9 @@ static struct usb_serial_driver mxu11x0_device = { .id_table = mxu1_idtable, .num_ports = 1, .port_probe = mxu1_port_probe, + .port_remove = mxu1_port_remove, .attach = mxu1_startup, + .release = mxu1_release, .open = mxu1_open, .close = mxu1_close, .ioctl = mxu1_ioctl, -- cgit v1.2.3 From 4152b387da81617c80cb2946b2d56e3958906b3e Mon Sep 17 00:00:00 2001 From: John Ernberg Date: Mon, 25 Jan 2016 12:27:17 +0000 Subject: USB: option: fix Cinterion AHxx enumeration In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Cc: stable # v3.9: 8ff10bdb14a52 Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 75350fc550a1..db86e512e0fc 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1695,7 +1695,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, -- cgit v1.2.3 From 23a9d5dcb6ae114733fac4757b0b154571c21129 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 8 Jan 2016 11:52:04 -0200 Subject: drm/etnaviv: remove owner assignment from platform_driver This platform_driver does not need to set an owner as it will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_drv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c index 5c89ebb52fd2..e8858985f01e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c @@ -668,7 +668,6 @@ static struct platform_driver etnaviv_platform_driver = { .probe = etnaviv_pdev_probe, .remove = etnaviv_pdev_remove, .driver = { - .owner = THIS_MODULE, .name = "etnaviv", .of_match_table = dt_match, }, -- cgit v1.2.3 From 339073ef77e45e87ec4cc8671b2d2328dcfd31f0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 22 Jan 2016 12:03:03 +0100 Subject: drm/etnaviv: hold object lock while getting pages for coredump While all objects that get coredumped have an active IOVA and thus pages already populated, etnaviv_gem_get_pages() still requires the object lock to be held. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_dump.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c index bf8fa859e8be..fd7d3e989e79 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c @@ -201,7 +201,9 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu) obj = vram->object; + mutex_lock(&obj->lock); pages = etnaviv_gem_get_pages(obj); + mutex_unlock(&obj->lock); if (pages) { int j; -- cgit v1.2.3 From f6427760a29ba3fd968e27ea567b1ebdd500740b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:32:13 +0000 Subject: drm/etnaviv: fix failure path if model is zero Fix the failure path to call pm_runtime_mark_last_busy() when failing due to the model field being zero. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 056a72e6ed26..e0e68dd7565d 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -511,8 +511,8 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) if (gpu->identity.model == 0) { dev_err(gpu->dev, "Unknown GPU model\n"); - pm_runtime_put_autosuspend(gpu->dev); - return -ENXIO; + ret = -ENXIO; + goto fail; } ret = etnaviv_hw_reset(gpu); -- cgit v1.2.3 From 186bac815227a4c26a0ad2f18c7450015d93ed0a Mon Sep 17 00:00:00 2001 From: Matthew Dawson Date: Mon, 25 Jan 2016 10:34:12 -0500 Subject: drm/radeon: Ensure radeon bo is unreserved in radeon_gem_va_ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Found with lockdep while testing gpu reset. Reviewed-by: Christian König Signed-off-by: Matthew Dawson Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_gem.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 3dcc5733ff69..e26c963f2e93 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -663,6 +663,7 @@ int radeon_gem_va_ioctl(struct drm_device *dev, void *data, bo_va = radeon_vm_bo_find(&fpriv->vm, rbo); if (!bo_va) { args->operation = RADEON_VA_RESULT_ERROR; + radeon_bo_unreserve(rbo); drm_gem_object_unreference_unlocked(gobj); return -ENOENT; } -- cgit v1.2.3 From f95429eccc570dc45d589c327bfcfddcdc3e8228 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 25 Jan 2016 18:06:48 -0500 Subject: drm/radeon: only init fbdev if we have connectors This fixes an issue that was noticed on an optimus/prime laptop with a kernel that was old enough to not support the integrated intel gfx (which was driving all the outputs), but did have support for the discrete radeon gpu. The end result was not falling back to VESA and leaving the user with a black screen. (Plus it is kind of silly to create an framebuffer device if there are no outputs hooked up to the gpu.) Signed-off-by: Rob Clark Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b3bb92368ae0..298ea1c453c3 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -1670,8 +1670,10 @@ int radeon_modeset_init(struct radeon_device *rdev) /* setup afmt */ radeon_afmt_init(rdev); - radeon_fbdev_init(rdev); - drm_kms_helper_poll_init(rdev->ddev); + if (!list_empty(&rdev->ddev->mode_config.connector_list)) { + radeon_fbdev_init(rdev); + drm_kms_helper_poll_init(rdev->ddev); + } /* do pm late init */ ret = radeon_pm_late_init(rdev); -- cgit v1.2.3 From f49d45c973984eb805eb989b6220aa7c1ee30bc2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 26 Jan 2016 00:30:33 -0500 Subject: drm/amdgpu: don't init fbdev if we don't have any connectors Don't init fbdev if we don't have connectors. E.g., if you have a PX laptop with the displays attached to an IGP with no driver support, you may end up with a blank screen rather than falling back to vesa, etc. Based on a similar radeon patch from Rob Clark. Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c index cfb6caad2a73..919146780a15 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c @@ -333,6 +333,10 @@ int amdgpu_fbdev_init(struct amdgpu_device *adev) if (!adev->mode_info.mode_config_initialized) return 0; + /* don't init fbdev if there are no connectors */ + if (list_empty(&adev->ddev->mode_config.connector_list)) + return 0; + /* select 8 bpp console on low vram cards */ if (adev->mc.real_vram_size <= (32*1024*1024)) bpp_sel = 8; -- cgit v1.2.3 From a28e35171cb1ff84197e8d271b65aaeb8c404827 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 22 Jan 2016 14:12:02 +0100 Subject: i2c: piix4: Fix SB800 locking We need a single mutex for all 4 shared SMBus ports on the SB800. A per-port mutex doesn't protect us from concurrent access. In theory the mutex should be per PCI device, however in practice we know that there's only ever a single instance of the device in a given system so we can use a global. Also take the mutex during initialization, as first port may be already in use when second port is initialized. Signed-off-by: Jean Delvare Tested-by: Christian Fetzer Reviewed-by: Mika Westerberg [wsa: made mutex static] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 22 ++++++---------------- 1 file changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index e04598595073..5fd7505b9018 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -137,6 +137,7 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { }; /* SB800 globals */ +static DEFINE_MUTEX(piix4_mutex_sb800); static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { "SDA0", "SDA2", "SDA3", "SDA4" }; @@ -148,7 +149,6 @@ struct i2c_piix4_adapdata { /* SB800 */ bool sb800_main; unsigned short port; - struct mutex *mutex; }; static int piix4_setup(struct pci_dev *PIIX4_dev, @@ -275,10 +275,12 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, else smb_en = (aux) ? 0x28 : 0x2c; + mutex_lock(&piix4_mutex_sb800); outb_p(smb_en, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); + mutex_unlock(&piix4_mutex_sb800); if (!smb_en) { smb_en_status = smba_en_lo & 0x10; @@ -559,7 +561,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, u8 port; int retval; - mutex_lock(adapdata->mutex); + mutex_lock(&piix4_mutex_sb800); outb_p(SB800_PIIX4_PORT_IDX, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); @@ -574,7 +576,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1); - mutex_unlock(adapdata->mutex); + mutex_unlock(&piix4_mutex_sb800); return retval; } @@ -673,17 +675,10 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba) { - struct mutex *mutex; struct i2c_piix4_adapdata *adapdata; int port; int retval; - mutex = kzalloc(sizeof(*mutex), GFP_KERNEL); - if (mutex == NULL) - return -ENOMEM; - - mutex_init(mutex); - for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) { retval = piix4_add_adapter(dev, smba, piix4_main_port_names_sb800[port], @@ -696,7 +691,6 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba) adapdata = i2c_get_adapdata(piix4_main_adapters[port]); adapdata->sb800_main = true; adapdata->port = port; - adapdata->mutex = mutex; } return retval; @@ -714,8 +708,6 @@ error: } } - kfree(mutex); - return retval; } @@ -798,10 +790,8 @@ static void piix4_adap_remove(struct i2c_adapter *adap) i2c_del_adapter(adap); if (adapdata->port == 0) { release_region(adapdata->smba, SMBIOSIZE); - if (adapdata->sb800_main) { - kfree(adapdata->mutex); + if (adapdata->sb800_main) release_region(SB800_PIIX4_SMB_IDX, 2); - } } kfree(adapdata); kfree(adap); -- cgit v1.2.3 From 83c60158ebf16417af28b338bc0380cf17f2b9f9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 25 Jan 2016 12:17:07 +0100 Subject: i2c: piix4: Fully initialize SB800 before it is registered This closes a race window where I2C device drivers attempt to access I2C buses which aren't fully initialized yet. Signed-off-by: Jean Delvare Tested-by: Christian Fetzer Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 5fd7505b9018..f79a84ef1aa4 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -627,6 +627,7 @@ static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, + bool sb800_main, unsigned short port, const char *name, struct i2c_adapter **padap) { struct i2c_adapter *adap; @@ -641,7 +642,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - adap->algo = &smbus_algorithm; + adap->algo = sb800_main ? &piix4_smbus_algorithm_sb800 + : &smbus_algorithm; adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); if (adapdata == NULL) { @@ -651,6 +653,8 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, } adapdata->smba = smba; + adapdata->sb800_main = sb800_main; + adapdata->port = port; /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; @@ -680,17 +684,11 @@ static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba) int retval; for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) { - retval = piix4_add_adapter(dev, smba, + retval = piix4_add_adapter(dev, smba, true, port, piix4_main_port_names_sb800[port], &piix4_main_adapters[port]); if (retval < 0) goto error; - - piix4_main_adapters[port]->algo = &piix4_smbus_algorithm_sb800; - - adapdata = i2c_get_adapdata(piix4_main_adapters[port]); - adapdata->sb800_main = true; - adapdata->port = port; } return retval; @@ -748,7 +746,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Try to register main SMBus adapter, give up if we can't */ - retval = piix4_add_adapter(dev, retval, "main", + retval = piix4_add_adapter(dev, retval, false, 0, "main", &piix4_main_adapters[0]); if (retval < 0) return retval; @@ -775,7 +773,8 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval > 0) { /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ - piix4_add_adapter(dev, retval, piix4_aux_port_name_sb800, + piix4_add_adapter(dev, retval, false, 0, + piix4_aux_port_name_sb800, &piix4_aux_adapter); } -- cgit v1.2.3 From 08c6e8cc66282a082484480c1a5641bc27d26c55 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 15 Jan 2016 22:02:12 +0200 Subject: i2c: designware-pci: use IRQF_COND_SUSPEND flag This is effectively reapplies the commit b0898fdaffb2 ("i2c: designware-pci: use IRQF_COND_SUSPEND flag") after the commit d80d134182ba ("i2c: designware: Move common probe code into i2c_dw_probe()"). Original message as follows. The mentioned flag fixes a warning on Intel Edison board since one of the I2C controller shares IRQ line with watchdog timer. Fixes: d80d134182ba (i2c: designware: Move common probe code into i2c_dw_probe()) Signed-off-by: Andy Shevchenko Acked-by: Jarkko Nikula Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index ba9732c236c5..10fbd6d841e0 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -874,7 +874,8 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) i2c_set_adapdata(adap, dev); i2c_dw_disable_int(dev); - r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED, + r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, + IRQF_SHARED | IRQF_COND_SUSPEND, dev_name(dev->dev), dev); if (r) { dev_err(dev->dev, "failure requesting irq %i: %d\n", -- cgit v1.2.3 From 2989be09a8a9d62a785137586ad941f916e08f83 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 14 Jan 2016 16:00:41 +0200 Subject: virtio_pci: fix use after free on release KASan detected a use-after-free error in virtio-pci remove code. In virtio_pci_remove(), vp_dev is still used after being freed in unregister_virtio_device() (in virtio_pci_release_dev() more precisely). To fix, keep a reference until cleanup is done. Fixes: 63bd62a08ca4 ("virtio_pci: defer kfree until release callback") Reported-by: Jerome Marchand Cc: stable@vger.kernel.org Cc: Sasha Levin Signed-off-by: Michael S. Tsirkin Tested-by: Jerome Marchand --- drivers/virtio/virtio_pci_common.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c index 36205c27c4d0..f6bed86c17f9 100644 --- a/drivers/virtio/virtio_pci_common.c +++ b/drivers/virtio/virtio_pci_common.c @@ -545,6 +545,7 @@ err_enable_device: static void virtio_pci_remove(struct pci_dev *pci_dev) { struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev); + struct device *dev = get_device(&vp_dev->vdev.dev); unregister_virtio_device(&vp_dev->vdev); @@ -554,6 +555,7 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) virtio_pci_modern_remove(vp_dev); pci_disable_device(pci_dev); + put_device(dev); } static struct pci_driver virtio_pci_driver = { -- cgit v1.2.3 From d8f51227f33fbb34e1e54e315175268f54e573e7 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Fri, 22 Jan 2016 16:18:29 +0100 Subject: s390/zcrypt: Fix cryptographic device id in kernel messages Currently, on card response failures a combination of card domain and domain id is recorded in the kernel messages. According to the message description only the card id will be recorded. The domain id is not relevant, since the whole card including all domains is set offline. Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/zcrypt_error.h | 15 +++++++++------ drivers/s390/crypto/zcrypt_msgtype50.c | 9 +++++---- drivers/s390/crypto/zcrypt_msgtype6.c | 20 ++++++++++---------- 3 files changed, 24 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h index 7b23f43c7b08..de1b6c1d172c 100644 --- a/drivers/s390/crypto/zcrypt_error.h +++ b/drivers/s390/crypto/zcrypt_error.h @@ -112,9 +112,10 @@ static inline int convert_error(struct zcrypt_device *zdev, atomic_set(&zcrypt_rescan_req, 1); zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, ehdr->reply_code); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online, + ehdr->reply_code); return -EAGAIN; case REP82_ERROR_TRANSPORT_FAIL: case REP82_ERROR_MACHINE_FAILURE: @@ -123,16 +124,18 @@ static inline int convert_error(struct zcrypt_device *zdev, atomic_set(&zcrypt_rescan_req, 1); zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, ehdr->reply_code); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online, + ehdr->reply_code); return -EAGAIN; default: zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, ehdr->reply_code); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online, + ehdr->reply_code); return -EAGAIN; /* repeat the request on a different device. */ } } diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c index 74edf2934e7c..eedfaa2cf715 100644 --- a/drivers/s390/crypto/zcrypt_msgtype50.c +++ b/drivers/s390/crypto/zcrypt_msgtype50.c @@ -336,9 +336,10 @@ static int convert_type80(struct zcrypt_device *zdev, /* The result is too short, the CEX2A card may not do that.. */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, t80h->code); + AP_QID_DEVICE(zdev->ap_dev->qid), + zdev->online, t80h->code); return -EAGAIN; /* repeat the request on a different device. */ } @@ -368,9 +369,9 @@ static int convert_response(struct zcrypt_device *zdev, default: /* Unknown response type, this should NEVER EVER happen */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online); return -EAGAIN; /* repeat the request on a different device. */ } } diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c index 9a2dd472c1cc..21959719daef 100644 --- a/drivers/s390/crypto/zcrypt_msgtype6.c +++ b/drivers/s390/crypto/zcrypt_msgtype6.c @@ -572,9 +572,9 @@ static int convert_type86_ica(struct zcrypt_device *zdev, return -EINVAL; zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%drc%d", - zdev->ap_dev->qid, zdev->online, + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online, msg->hdr.reply_code); return -EAGAIN; /* repeat the request on a different device. */ } @@ -715,9 +715,9 @@ static int convert_response_ica(struct zcrypt_device *zdev, default: /* Unknown response type, this should NEVER EVER happen */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online); return -EAGAIN; /* repeat the request on a different device. */ } } @@ -747,9 +747,9 @@ static int convert_response_xcrb(struct zcrypt_device *zdev, xcRB->status = 0x0008044DL; /* HDD_InvalidParm */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online); return -EAGAIN; /* repeat the request on a different device. */ } } @@ -773,9 +773,9 @@ static int convert_response_ep11_xcrb(struct zcrypt_device *zdev, default: /* Unknown response type, this should NEVER EVER happen */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online); return -EAGAIN; /* repeat the request on a different device. */ } } @@ -800,9 +800,9 @@ static int convert_response_rng(struct zcrypt_device *zdev, default: /* Unknown response type, this should NEVER EVER happen */ zdev->online = 0; pr_err("Cryptographic device %x failed and was set offline\n", - zdev->ap_dev->qid); + AP_QID_DEVICE(zdev->ap_dev->qid)); ZCRYPT_DBF_DEV(DBF_ERR, zdev, "dev%04xo%dfail", - zdev->ap_dev->qid, zdev->online); + AP_QID_DEVICE(zdev->ap_dev->qid), zdev->online); return -EAGAIN; /* repeat the request on a different device. */ } } -- cgit v1.2.3 From 0d9bfe9123cfde59bf5c2e375b59d2a7d5061c4c Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 25 Jan 2016 10:30:27 +0100 Subject: s390/cio: fix measurement characteristics memleak Measurement characteristics are allocated during channel path registration but not freed during deregistration. Fix this by embedding these characteristics inside struct channel_path. Signed-off-by: Sebastian Ott Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chp.c | 6 +++--- drivers/s390/cio/chp.h | 2 +- drivers/s390/cio/chsc.c | 16 ++-------------- 3 files changed, 6 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index c692dfebd0ba..3d2b6c48c18e 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -139,11 +139,11 @@ static ssize_t chp_measurement_chars_read(struct file *filp, device = container_of(kobj, struct device, kobj); chp = to_channelpath(device); - if (!chp->cmg_chars) + if (chp->cmg == -1) return 0; - return memory_read_from_buffer(buf, count, &off, - chp->cmg_chars, sizeof(struct cmg_chars)); + return memory_read_from_buffer(buf, count, &off, &chp->cmg_chars, + sizeof(chp->cmg_chars)); } static struct bin_attribute chp_measurement_chars_attr = { diff --git a/drivers/s390/cio/chp.h b/drivers/s390/cio/chp.h index 4efd5b867cc3..af0232290dc4 100644 --- a/drivers/s390/cio/chp.h +++ b/drivers/s390/cio/chp.h @@ -48,7 +48,7 @@ struct channel_path { /* Channel-measurement related stuff: */ int cmg; int shared; - void *cmg_chars; + struct cmg_chars cmg_chars; }; /* Return channel_path struct for given chpid. */ diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index a831d18596a5..5df0efee54db 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -967,22 +967,19 @@ static void chsc_initialize_cmg_chars(struct channel_path *chp, u8 cmcv, struct cmg_chars *chars) { - struct cmg_chars *cmg_chars; int i, mask; - cmg_chars = chp->cmg_chars; for (i = 0; i < NR_MEASUREMENT_CHARS; i++) { mask = 0x80 >> (i + 3); if (cmcv & mask) - cmg_chars->values[i] = chars->values[i]; + chp->cmg_chars.values[i] = chars->values[i]; else - cmg_chars->values[i] = 0; + chp->cmg_chars.values[i] = 0; } } int chsc_get_channel_measurement_chars(struct channel_path *chp) { - struct cmg_chars *cmg_chars; int ccode, ret; struct { @@ -1006,11 +1003,6 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp) u32 data[NR_MEASUREMENT_CHARS]; } __attribute__ ((packed)) *scmc_area; - chp->cmg_chars = NULL; - cmg_chars = kmalloc(sizeof(*cmg_chars), GFP_KERNEL); - if (!cmg_chars) - return -ENOMEM; - spin_lock_irq(&chsc_page_lock); memset(chsc_page, 0, PAGE_SIZE); scmc_area = chsc_page; @@ -1042,14 +1034,10 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp) /* No cmg-dependent data. */ goto out; } - chp->cmg_chars = cmg_chars; chsc_initialize_cmg_chars(chp, scmc_area->cmcv, (struct cmg_chars *) &scmc_area->data); out: spin_unlock_irq(&chsc_page_lock); - if (!chp->cmg_chars) - kfree(cmg_chars); - return ret; } -- cgit v1.2.3 From 61f0bfcf8020f02eb09adaef96745d1c1d1b3623 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 25 Jan 2016 10:31:33 +0100 Subject: s390/cio: ensure consistent measurement state Make sure that in all cases where we could not obtain measurement characteristics the associated fields are set to invalid values. Note: without this change the "shared" capability of a channel path for which we could not obtain the measurement characteristics was incorrectly displayed as 0 (not shared). We will now correctly report "unknown" in this case. Signed-off-by: Sebastian Ott Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chp.c | 13 +++++-------- drivers/s390/cio/chsc.c | 12 ++++++++---- 2 files changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 3d2b6c48c18e..8504629cbf72 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -466,14 +466,11 @@ int chp_new(struct chp_id chpid) ret = -ENODEV; goto out_free; } - /* Get channel-measurement characteristics. */ - if (css_chsc_characteristics.scmc && css_chsc_characteristics.secm) { - ret = chsc_get_channel_measurement_chars(chp); - if (ret) - goto out_free; - } else { - chp->cmg = -1; - } + + ret = chsc_get_channel_measurement_chars(chp); + if (ret) + goto out_free; + dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id); /* make it known to the system */ diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 5df0efee54db..13747c510c0b 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -1003,6 +1003,12 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp) u32 data[NR_MEASUREMENT_CHARS]; } __attribute__ ((packed)) *scmc_area; + chp->shared = -1; + chp->cmg = -1; + + if (!css_chsc_characteristics.scmc || !css_chsc_characteristics.secm) + return 0; + spin_lock_irq(&chsc_page_lock); memset(chsc_page, 0, PAGE_SIZE); scmc_area = chsc_page; @@ -1023,11 +1029,9 @@ int chsc_get_channel_measurement_chars(struct channel_path *chp) scmc_area->response.code); goto out; } - if (scmc_area->not_valid) { - chp->cmg = -1; - chp->shared = -1; + if (scmc_area->not_valid) goto out; - } + chp->cmg = scmc_area->cmg; chp->shared = scmc_area->shared; if (chp->cmg != 2 && chp->cmg != 3) { -- cgit v1.2.3 From 9f3d6d7a40a178b8a5b5274f4e55fec8c30147c9 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Mon, 25 Jan 2016 10:32:51 +0100 Subject: s390/cio: update measurement characteristics Per channel path measurement characteristics are obtained during channel path registration. However if some properties of a channel path change we don't update the measurement characteristics. Make sure to update the characteristics when we change the properties of a channel path or receive a notification from FW about such a change. Signed-off-by: Sebastian Ott Reviewed-by: Peter Oberparleiter Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/chp.c | 12 +++++------- drivers/s390/cio/chsc.c | 17 +++++++++++++++-- 2 files changed, 20 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c index 8504629cbf72..50597f9522fe 100644 --- a/drivers/s390/cio/chp.c +++ b/drivers/s390/cio/chp.c @@ -416,7 +416,8 @@ static void chp_release(struct device *dev) * chp_update_desc - update channel-path description * @chp - channel-path * - * Update the channel-path description of the specified channel-path. + * Update the channel-path description of the specified channel-path + * including channel measurement related information. * Return zero on success, non-zero otherwise. */ int chp_update_desc(struct channel_path *chp) @@ -428,8 +429,10 @@ int chp_update_desc(struct channel_path *chp) return rc; rc = chsc_determine_fmt1_channel_path_desc(chp->chpid, &chp->desc_fmt1); + if (rc) + return rc; - return rc; + return chsc_get_channel_measurement_chars(chp); } /** @@ -466,11 +469,6 @@ int chp_new(struct chp_id chpid) ret = -ENODEV; goto out_free; } - - ret = chsc_get_channel_measurement_chars(chp); - if (ret) - goto out_free; - dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id); /* make it known to the system */ diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 13747c510c0b..c424c0c7367e 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -224,8 +225,9 @@ out_unreg: void chsc_chp_offline(struct chp_id chpid) { - char dbf_txt[15]; + struct channel_path *chp = chpid_to_chp(chpid); struct chp_link link; + char dbf_txt[15]; sprintf(dbf_txt, "chpr%x.%02x", chpid.cssid, chpid.id); CIO_TRACE_EVENT(2, dbf_txt); @@ -236,6 +238,11 @@ void chsc_chp_offline(struct chp_id chpid) link.chpid = chpid; /* Wait until previous actions have settled. */ css_wait_for_slow_path(); + + mutex_lock(&chp->lock); + chp_update_desc(chp); + mutex_unlock(&chp->lock); + for_each_subchannel_staged(s390_subchannel_remove_chpid, NULL, &link); } @@ -690,8 +697,9 @@ static void chsc_process_crw(struct crw *crw0, struct crw *crw1, int overflow) void chsc_chp_online(struct chp_id chpid) { - char dbf_txt[15]; + struct channel_path *chp = chpid_to_chp(chpid); struct chp_link link; + char dbf_txt[15]; sprintf(dbf_txt, "cadd%x.%02x", chpid.cssid, chpid.id); CIO_TRACE_EVENT(2, dbf_txt); @@ -701,6 +709,11 @@ void chsc_chp_online(struct chp_id chpid) link.chpid = chpid; /* Wait until previous actions have settled. */ css_wait_for_slow_path(); + + mutex_lock(&chp->lock); + chp_update_desc(chp); + mutex_unlock(&chp->lock); + for_each_subchannel_staged(__s390_process_res_acc, NULL, &link); css_schedule_reprobe(); -- cgit v1.2.3 From eb249a11913d316fc1a27dd07a1e1e43bda9199d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 25 Jan 2016 16:58:08 +0100 Subject: irqchip/s3c24xx: Mark init_eint as __maybe_unused The init_eint array in the s3c24xx irqchip driver is used by every individual chip variant, but Kconfig allows building the driver when they are all disabled, and that leads to a harmless compile-time warning: drivers/irqchip/irq-s3c24xx.c:608:28: error: 'init_eint' defined but not used [-Werror=unused-variable] This marks the array as __maybe_unused to avoid the warning. Signed-off-by: Arnd Bergmann Acked-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Link: http://lkml.kernel.org/r/1453737499-1960073-1-git-send-email-arnd@arndb.de Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-s3c24xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-s3c24xx.c b/drivers/irqchip/irq-s3c24xx.c index c71914e8f596..5dc5a760c723 100644 --- a/drivers/irqchip/irq-s3c24xx.c +++ b/drivers/irqchip/irq-s3c24xx.c @@ -605,7 +605,7 @@ err: return ERR_PTR(ret); } -static struct s3c_irq_data init_eint[32] = { +static struct s3c_irq_data __maybe_unused init_eint[32] = { { .type = S3C_IRQTYPE_NONE, }, /* reserved */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ { .type = S3C_IRQTYPE_NONE, }, /* reserved */ -- cgit v1.2.3 From 0df337cf92c107fb515c9df6907052a97bd484b9 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 25 Jan 2016 23:24:17 +0100 Subject: irqchip: Fix dependencies for archs w/o HAS_IOMEM Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jason Cooper Cc: Marc Zyngier Link: http://lkml.kernel.org/r/1453760661-1444-19-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner --- drivers/irqchip/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 11fc2a27fa2e..90ab59107830 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -154,6 +154,7 @@ config TB10X_IRQC config TS4800_IRQ tristate "TS-4800 IRQ controller" select IRQ_DOMAIN + depends on HAS_IOMEM help Support for the TS-4800 FPGA IRQ controller -- cgit v1.2.3 From 14a0db3cdd114da757197193f66786e63649c91e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 26 Jan 2016 13:52:26 +0000 Subject: of: MSI: Simplify irqdomain lookup So far, when trying to associate a device with its MSI domain, we first lookup the domain using a MSI token, and if this doesn't return anything useful, we pick up any domain matching the same node. This logic is broken for two reasons: 1) Only the generic MSI code (PCI or platform) sets this token to PCI/MSI or platform MSI. So we're guaranteed that if there is something to be found, we will find it with the first call. 2) If we have a convoluted situation where: - a single node implements both wired and MSI interrupts - MSI support for that HW hasn't been compiled in we'll end up using the wired domain for MSIs anyway, and things break badly. So let's just remove __of_get_msi_domain, and replace it by a direct call to irq_find_matching_host, because that's what we really want. Signed-off-by: Marc Zyngier Acked-by: Rob Herring Cc: Greg Kroah-Hartman Cc: Frank Rowand Cc: Grant Likely Cc: Thomas Petazzoni Cc: Jiang Liu Link: http://lkml.kernel.org/r/1453816347-32720-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/of/irq.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 4fa916dffc91..a9ea5525109b 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -680,18 +680,6 @@ u32 of_msi_map_rid(struct device *dev, struct device_node *msi_np, u32 rid_in) return __of_msi_map_rid(dev, &msi_np, rid_in); } -static struct irq_domain *__of_get_msi_domain(struct device_node *np, - enum irq_domain_bus_token token) -{ - struct irq_domain *d; - - d = irq_find_matching_host(np, token); - if (!d) - d = irq_find_host(np); - - return d; -} - /** * of_msi_map_get_device_domain - Use msi-map to find the relevant MSI domain * @dev: device for which the mapping is to be done. @@ -707,7 +695,7 @@ struct irq_domain *of_msi_map_get_device_domain(struct device *dev, u32 rid) struct device_node *np = NULL; __of_msi_map_rid(dev, &np, rid); - return __of_get_msi_domain(np, DOMAIN_BUS_PCI_MSI); + return irq_find_matching_host(np, DOMAIN_BUS_PCI_MSI); } /** @@ -731,7 +719,7 @@ struct irq_domain *of_msi_get_domain(struct device *dev, /* Check for a single msi-parent property */ msi_np = of_parse_phandle(np, "msi-parent", 0); if (msi_np && !of_property_read_bool(msi_np, "#msi-cells")) { - d = __of_get_msi_domain(msi_np, token); + d = irq_find_matching_host(msi_np, token); if (!d) of_node_put(msi_np); return d; @@ -745,7 +733,7 @@ struct irq_domain *of_msi_get_domain(struct device *dev, while (!of_parse_phandle_with_args(np, "msi-parent", "#msi-cells", index, &args)) { - d = __of_get_msi_domain(args.np, token); + d = irq_find_matching_host(args.np, token); if (d) return d; -- cgit v1.2.3 From 2be6d9bfef53d185975b44fd808aece36595e83e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 25 Jan 2016 17:02:49 +0100 Subject: clocksource: Select CLKSRC_MMIO where needed The Tegra clocksource implementation uses the clocksource_mmio helper functions, but currently can be configured without them, which fails: drivers/clocksource/built-in.o: In function `tegra20_init_timer': :(.init.text+0xac): undefined reference to `clocksource_mmio_init' :(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up' The same problem exists for Digicolor: drivers/clocksource/built-in.o: In function `digicolor_timer_init': :(.init.text+0xfa): undefined reference to `clocksource_mmio_init' :(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down' I've inspected the Kconfig file to look for other cases that I have not yet run into, and added an explicit 'select' to each one to ensure we can successfully link the drivers. Signed-off-by: Arnd Bergmann Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de Signed-off-by: Thomas Gleixner --- drivers/clocksource/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 56777f04d2d9..f70b4f3b4857 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -30,6 +30,7 @@ config CLKSRC_MMIO config DIGICOLOR_TIMER bool "Digicolor timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + select CLKSRC_MMIO help Enables the support for the digicolor timer driver. @@ -55,6 +56,7 @@ config ARMADA_370_XP_TIMER bool "Armada 370 and XP timer driver" if COMPILE_TEST depends on ARM select CLKSRC_OF + select CLKSRC_MMIO help Enables the support for the Armada 370 and XP timer driver. @@ -89,6 +91,7 @@ config SUN5I_HSTIMER config TEGRA_TIMER bool "Tegra timer driver" if COMPILE_TEST + select CLKSRC_MMIO depends on ARM help Enables support for the Tegra driver. @@ -263,6 +266,7 @@ config FSL_FTM_TIMER config VF_PIT_TIMER bool + select CLKSRC_MMIO help Support for Period Interrupt Timer on Freescale Vybrid Family SoCs. @@ -394,6 +398,7 @@ config CLKSRC_ST_LPC bool "Low power clocksource found in the LPC" if COMPILE_TEST select CLKSRC_OF if OF depends on HAS_IOMEM + select CLKSRC_MMIO help Enable this option to use the Low Power controller timer as clocksource. -- cgit v1.2.3 From d7023e62c5128bf9f150d792a3ea8c758cb431a3 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 25 Jan 2016 23:24:19 +0100 Subject: clocksource: Fix dependencies for archs w/o HAS_IOMEM Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Daniel Lezcano Link: http://lkml.kernel.org/r/1453760661-1444-21-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner --- drivers/clocksource/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index f70b4f3b4857..33db7406c0e2 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -31,6 +31,7 @@ config DIGICOLOR_TIMER bool "Digicolor timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS select CLKSRC_MMIO + depends on HAS_IOMEM help Enables the support for the digicolor timer driver. @@ -78,6 +79,7 @@ config ORION_TIMER config SUN4I_TIMER bool "Sun4i timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help Enables support for the Sun4i timer. @@ -99,6 +101,7 @@ config TEGRA_TIMER config VT8500_TIMER bool "VT8500 timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help Enables support for the VT8500 driver. @@ -134,6 +137,7 @@ config CLKSRC_NOMADIK_MTU_SCHED_CLOCK config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help Use the always on PRCMU Timer as clocksource @@ -251,6 +255,7 @@ config CLKSRC_EXYNOS_MCT config CLKSRC_SAMSUNG_PWM bool "PWM timer drvier for Samsung S3C, S5P" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help This is a new clocksource driver for the PWM timer found in Samsung S3C, S5P and Exynos SoCs, replacing an earlier driver @@ -260,6 +265,7 @@ config CLKSRC_SAMSUNG_PWM config FSL_FTM_TIMER bool "Freescale FlexTimer Module driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help Support for Freescale FlexTimer Module (FTM) timer. @@ -364,6 +370,7 @@ config CLKSRC_TANGO_XTAL config CLKSRC_PXA bool "Clocksource for PXA or SA-11x0 platform" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help This enables OST0 support available on PXA and SA-11x0 -- cgit v1.2.3 From bb1a793125d9cc61f2d1cff92fe3927fec45d528 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 26 Jan 2016 13:52:27 +0000 Subject: base: Export platform_msi_domain_[alloc,free]_irqs The new function platform_msi_domain_{alloc,free}_irqs are meant to be used in platform drivers, which can be built as modules. Therefore, it makes sense to export them to be used from kernel modules. Signed-off-by: Thomas Petazzoni Acked-by: Marc Zyngier Cc: Greg Kroah-Hartman Cc: Rob Herring Cc: Frank Rowand Cc: Grant Likely Cc: Jiang Liu Link: http://lkml.kernel.org/r/1453816347-32720-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/base/platform-msi.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/base/platform-msi.c b/drivers/base/platform-msi.c index 47c43386786b..279e53989374 100644 --- a/drivers/base/platform-msi.c +++ b/drivers/base/platform-msi.c @@ -284,6 +284,7 @@ out_free_priv_data: return err; } +EXPORT_SYMBOL_GPL(platform_msi_domain_alloc_irqs); /** * platform_msi_domain_free_irqs - Free MSI interrupts for @dev @@ -301,6 +302,7 @@ void platform_msi_domain_free_irqs(struct device *dev) msi_domain_free_irqs(dev->msi_domain, dev); platform_msi_free_descs(dev, 0, MAX_DEV_MSIS); } +EXPORT_SYMBOL_GPL(platform_msi_domain_free_irqs); /** * platform_msi_get_host_data - Query the private data associated with -- cgit v1.2.3 From 18aa60ce2751c95d3412ed06a58b8b6cfb6f88f2 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 26 Jan 2016 14:24:15 +0000 Subject: irqchip/gic-v3-its: Recompute the number of pages on page size change When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by: Ma Jun Signed-off-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-gic-v3-its.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index e23d1d18f9d6..3447549fcc93 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -875,6 +875,7 @@ static int its_alloc_tables(const char *node_name, struct its_node *its) } alloc_size = (1 << order) * PAGE_SIZE; +retry_alloc_baser: alloc_pages = (alloc_size / psz); if (alloc_pages > GITS_BASER_PAGES_MAX) { alloc_pages = GITS_BASER_PAGES_MAX; @@ -938,13 +939,16 @@ retry_baser: * size and retry. If we reach 4K, then * something is horribly wrong... */ + free_pages((unsigned long)base, order); + its->tables[i] = NULL; + switch (psz) { case SZ_16K: psz = SZ_4K; - goto retry_baser; + goto retry_alloc_baser; case SZ_64K: psz = SZ_16K; - goto retry_baser; + goto retry_alloc_baser; } } -- cgit v1.2.3 From 25cad69f21f5532d99e2ee73c8ab6512bcab614c Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Mon, 30 Nov 2015 12:50:05 +0100 Subject: base/platform: Fix platform drivers with no probe callback Since b8b2c7d845d5, platform_drv_probe() is called for all platform devices. If drv->probe is NULL, and dev_pm_domain_attach() fails, platform_drv_probe() will return the error code from dev_pm_domain_attach(). This causes real_probe() to enter the "probe_failed" path and set dev->driver to NULL. Before b8b2c7d845d5, real_probe() would assume success if both dev->bus->probe and drv->probe were missing. As a result, a device and driver could be "bound" together just by matching their names; this doesn't work any more after b8b2c7d845d5. This may cause problems later for certain usage of platform_driver_register() and platform_device_register_simple(). I observed a panic while loading the tpm_tis driver with parameter "force=1" (i.e. registering tpm_tis as a platform driver), because tpm_tis_init's assumption that the device returned by platform_device_register_simple() was bound didn't hold any more (tpmm_chip_alloc() dereferences chip->pdev->driver, causing panic). This patch restores the previous (4.3.0 and earlier) behavior of platform_drv_probe() in the case when the associated platform driver has no "probe" function. Fixes: b8b2c7d845d5 ("base/platform: assert that dev_pm_domain callbacks are called unconditionally") Signed-off-by: Martin Wilck Cc: stable # 4.4 Cc: Martin Fuzzey Acked-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 73d6e5d39e33..f437afa17f2b 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -558,10 +558,15 @@ static int platform_drv_probe(struct device *_dev) return ret; ret = dev_pm_domain_attach(_dev, true); - if (ret != -EPROBE_DEFER && drv->probe) { - ret = drv->probe(dev); - if (ret) - dev_pm_domain_detach(_dev, true); + if (ret != -EPROBE_DEFER) { + if (drv->probe) { + ret = drv->probe(dev); + if (ret) + dev_pm_domain_detach(_dev, true); + } else { + /* don't fail if just dev_pm_domain_attach failed */ + ret = 0; + } } if (drv->prevent_deferred_probe && ret == -EPROBE_DEFER) { -- cgit v1.2.3 From b98c66887ee1aec661dcb88fe17399d5d112ed98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Jan 2016 15:19:59 +0000 Subject: drm/etnaviv: ignore VG GPUs with FE2.0 Ignore GPUs with a 2.0 front end. These have a different register layout for the front end, which provokes imprecise aborts from the register accesses in the 'gpu' debugfs file. Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index e0e68dd7565d..a9530f59e6fe 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -515,6 +515,14 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) goto fail; } + /* Exclude VG cores with FE2.0 */ + if (gpu->identity.features & chipFeatures_PIPE_VG && + gpu->identity.features & chipFeatures_FE20) { + dev_info(gpu->dev, "Ignoring GPU with VG and FE2.0\n"); + ret = -ENXIO; + goto fail; + } + ret = etnaviv_hw_reset(gpu); if (ret) goto fail; -- cgit v1.2.3 From e2a2e263e06a0c153234b3e93fb85612d1c454d3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:35:43 +0000 Subject: drm/etnaviv: update common and state_hi xml.h files Update the common and state_hi xml.h header files from the etnaviv repository. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/common.xml.h | 59 +++++++++++++++++++++++++++++----- drivers/gpu/drm/etnaviv/state_hi.xml.h | 26 +++++++++++++-- 2 files changed, 75 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/common.xml.h b/drivers/gpu/drm/etnaviv/common.xml.h index 9e585d51fb78..e881482b5971 100644 --- a/drivers/gpu/drm/etnaviv/common.xml.h +++ b/drivers/gpu/drm/etnaviv/common.xml.h @@ -8,8 +8,8 @@ http://0x04.net/cgit/index.cgi/rules-ng-ng git clone git://0x04.net/rules-ng-ng The rules-ng-ng source files this header was generated from are: -- state_vg.xml ( 5973 bytes, from 2015-03-25 11:26:01) -- common.xml ( 18437 bytes, from 2015-03-25 11:27:41) +- state_hi.xml ( 24309 bytes, from 2015-12-12 09:02:53) +- common.xml ( 18379 bytes, from 2015-12-12 09:02:53) Copyright (C) 2015 */ @@ -30,15 +30,19 @@ Copyright (C) 2015 #define ENDIAN_MODE_NO_SWAP 0x00000000 #define ENDIAN_MODE_SWAP_16 0x00000001 #define ENDIAN_MODE_SWAP_32 0x00000002 +#define chipModel_GC200 0x00000200 #define chipModel_GC300 0x00000300 #define chipModel_GC320 0x00000320 +#define chipModel_GC328 0x00000328 #define chipModel_GC350 0x00000350 #define chipModel_GC355 0x00000355 #define chipModel_GC400 0x00000400 #define chipModel_GC410 0x00000410 #define chipModel_GC420 0x00000420 +#define chipModel_GC428 0x00000428 #define chipModel_GC450 0x00000450 #define chipModel_GC500 0x00000500 +#define chipModel_GC520 0x00000520 #define chipModel_GC530 0x00000530 #define chipModel_GC600 0x00000600 #define chipModel_GC700 0x00000700 @@ -46,9 +50,16 @@ Copyright (C) 2015 #define chipModel_GC860 0x00000860 #define chipModel_GC880 0x00000880 #define chipModel_GC1000 0x00001000 +#define chipModel_GC1500 0x00001500 #define chipModel_GC2000 0x00002000 #define chipModel_GC2100 0x00002100 +#define chipModel_GC2200 0x00002200 +#define chipModel_GC2500 0x00002500 +#define chipModel_GC3000 0x00003000 #define chipModel_GC4000 0x00004000 +#define chipModel_GC5000 0x00005000 +#define chipModel_GC5200 0x00005200 +#define chipModel_GC6400 0x00006400 #define RGBA_BITS_R 0x00000001 #define RGBA_BITS_G 0x00000002 #define RGBA_BITS_B 0x00000004 @@ -160,7 +171,7 @@ Copyright (C) 2015 #define chipMinorFeatures2_UNK8 0x00000100 #define chipMinorFeatures2_UNK9 0x00000200 #define chipMinorFeatures2_UNK10 0x00000400 -#define chipMinorFeatures2_SAMPLERBASE_16 0x00000800 +#define chipMinorFeatures2_HALTI1 0x00000800 #define chipMinorFeatures2_UNK12 0x00001000 #define chipMinorFeatures2_UNK13 0x00002000 #define chipMinorFeatures2_UNK14 0x00004000 @@ -189,7 +200,7 @@ Copyright (C) 2015 #define chipMinorFeatures3_UNK5 0x00000020 #define chipMinorFeatures3_UNK6 0x00000040 #define chipMinorFeatures3_UNK7 0x00000080 -#define chipMinorFeatures3_UNK8 0x00000100 +#define chipMinorFeatures3_FAST_MSAA 0x00000100 #define chipMinorFeatures3_UNK9 0x00000200 #define chipMinorFeatures3_BUG_FIXES10 0x00000400 #define chipMinorFeatures3_UNK11 0x00000800 @@ -199,7 +210,7 @@ Copyright (C) 2015 #define chipMinorFeatures3_UNK15 0x00008000 #define chipMinorFeatures3_UNK16 0x00010000 #define chipMinorFeatures3_UNK17 0x00020000 -#define chipMinorFeatures3_UNK18 0x00040000 +#define chipMinorFeatures3_ACE 0x00040000 #define chipMinorFeatures3_UNK19 0x00080000 #define chipMinorFeatures3_UNK20 0x00100000 #define chipMinorFeatures3_UNK21 0x00200000 @@ -207,7 +218,7 @@ Copyright (C) 2015 #define chipMinorFeatures3_UNK23 0x00800000 #define chipMinorFeatures3_UNK24 0x01000000 #define chipMinorFeatures3_UNK25 0x02000000 -#define chipMinorFeatures3_UNK26 0x04000000 +#define chipMinorFeatures3_NEW_HZ 0x04000000 #define chipMinorFeatures3_UNK27 0x08000000 #define chipMinorFeatures3_UNK28 0x10000000 #define chipMinorFeatures3_UNK29 0x20000000 @@ -229,9 +240,9 @@ Copyright (C) 2015 #define chipMinorFeatures4_UNK13 0x00002000 #define chipMinorFeatures4_UNK14 0x00004000 #define chipMinorFeatures4_UNK15 0x00008000 -#define chipMinorFeatures4_UNK16 0x00010000 +#define chipMinorFeatures4_HALTI2 0x00010000 #define chipMinorFeatures4_UNK17 0x00020000 -#define chipMinorFeatures4_UNK18 0x00040000 +#define chipMinorFeatures4_SMALL_MSAA 0x00040000 #define chipMinorFeatures4_UNK19 0x00080000 #define chipMinorFeatures4_UNK20 0x00100000 #define chipMinorFeatures4_UNK21 0x00200000 @@ -245,5 +256,37 @@ Copyright (C) 2015 #define chipMinorFeatures4_UNK29 0x20000000 #define chipMinorFeatures4_UNK30 0x40000000 #define chipMinorFeatures4_UNK31 0x80000000 +#define chipMinorFeatures5_UNK0 0x00000001 +#define chipMinorFeatures5_UNK1 0x00000002 +#define chipMinorFeatures5_UNK2 0x00000004 +#define chipMinorFeatures5_UNK3 0x00000008 +#define chipMinorFeatures5_UNK4 0x00000010 +#define chipMinorFeatures5_UNK5 0x00000020 +#define chipMinorFeatures5_UNK6 0x00000040 +#define chipMinorFeatures5_UNK7 0x00000080 +#define chipMinorFeatures5_UNK8 0x00000100 +#define chipMinorFeatures5_HALTI3 0x00000200 +#define chipMinorFeatures5_UNK10 0x00000400 +#define chipMinorFeatures5_UNK11 0x00000800 +#define chipMinorFeatures5_UNK12 0x00001000 +#define chipMinorFeatures5_UNK13 0x00002000 +#define chipMinorFeatures5_UNK14 0x00004000 +#define chipMinorFeatures5_UNK15 0x00008000 +#define chipMinorFeatures5_UNK16 0x00010000 +#define chipMinorFeatures5_UNK17 0x00020000 +#define chipMinorFeatures5_UNK18 0x00040000 +#define chipMinorFeatures5_UNK19 0x00080000 +#define chipMinorFeatures5_UNK20 0x00100000 +#define chipMinorFeatures5_UNK21 0x00200000 +#define chipMinorFeatures5_UNK22 0x00400000 +#define chipMinorFeatures5_UNK23 0x00800000 +#define chipMinorFeatures5_UNK24 0x01000000 +#define chipMinorFeatures5_UNK25 0x02000000 +#define chipMinorFeatures5_UNK26 0x04000000 +#define chipMinorFeatures5_UNK27 0x08000000 +#define chipMinorFeatures5_UNK28 0x10000000 +#define chipMinorFeatures5_UNK29 0x20000000 +#define chipMinorFeatures5_UNK30 0x40000000 +#define chipMinorFeatures5_UNK31 0x80000000 #endif /* COMMON_XML */ diff --git a/drivers/gpu/drm/etnaviv/state_hi.xml.h b/drivers/gpu/drm/etnaviv/state_hi.xml.h index 0064f2640396..6a7de5f1454a 100644 --- a/drivers/gpu/drm/etnaviv/state_hi.xml.h +++ b/drivers/gpu/drm/etnaviv/state_hi.xml.h @@ -8,8 +8,8 @@ http://0x04.net/cgit/index.cgi/rules-ng-ng git clone git://0x04.net/rules-ng-ng The rules-ng-ng source files this header was generated from are: -- state_hi.xml ( 23420 bytes, from 2015-03-25 11:47:21) -- common.xml ( 18437 bytes, from 2015-03-25 11:27:41) +- state_hi.xml ( 24309 bytes, from 2015-12-12 09:02:53) +- common.xml ( 18437 bytes, from 2015-12-12 09:02:53) Copyright (C) 2015 */ @@ -182,8 +182,25 @@ Copyright (C) 2015 #define VIVS_HI_CHIP_MINOR_FEATURE_3 0x00000088 +#define VIVS_HI_CHIP_SPECS_3 0x0000008c +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__MASK 0x000001f0 +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__SHIFT 4 +#define VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT__MASK) +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__MASK 0x00000007 +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__SHIFT 0 +#define VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_3_GPU_CORE_COUNT__MASK) + #define VIVS_HI_CHIP_MINOR_FEATURE_4 0x00000094 +#define VIVS_HI_CHIP_SPECS_4 0x0000009c +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__MASK 0x0001f000 +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__SHIFT 12 +#define VIVS_HI_CHIP_SPECS_4_STREAM_COUNT(x) (((x) << VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__SHIFT) & VIVS_HI_CHIP_SPECS_4_STREAM_COUNT__MASK) + +#define VIVS_HI_CHIP_MINOR_FEATURE_5 0x000000a0 + +#define VIVS_HI_CHIP_PRODUCT_ID 0x000000a8 + #define VIVS_PM 0x00000000 #define VIVS_PM_POWER_CONTROLS 0x00000100 @@ -206,6 +223,11 @@ Copyright (C) 2015 #define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_FE 0x00000001 #define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_DE 0x00000002 #define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_PE 0x00000004 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_SH 0x00000008 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_PA 0x00000010 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_SE 0x00000020 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_RA 0x00000040 +#define VIVS_PM_MODULE_STATUS_MODULE_CLOCK_GATED_TX 0x00000080 #define VIVS_PM_PULSE_EATER 0x0000010c -- cgit v1.2.3 From 507f899137f9e4f1405820b946063a6db78b2295 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:35:48 +0000 Subject: drm/etnaviv: use defined constants for the chip model Use the defined constants in common.xml.h for the chip model rather than coding these as hex numbers. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index a9530f59e6fe..7dc355ef7c4e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -173,7 +173,7 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) /* Convert the register max value */ if (gpu->identity.register_max) gpu->identity.register_max = 1 << gpu->identity.register_max; - else if (gpu->identity.model == 0x0400) + else if (gpu->identity.model == chipModel_GC400) gpu->identity.register_max = 32; else gpu->identity.register_max = 64; @@ -181,10 +181,10 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) /* Convert thread count */ if (gpu->identity.thread_count) gpu->identity.thread_count = 1 << gpu->identity.thread_count; - else if (gpu->identity.model == 0x0400) + else if (gpu->identity.model == chipModel_GC400) gpu->identity.thread_count = 64; - else if (gpu->identity.model == 0x0500 || - gpu->identity.model == 0x0530) + else if (gpu->identity.model == chipModel_GC500 || + gpu->identity.model == chipModel_GC530) gpu->identity.thread_count = 128; else gpu->identity.thread_count = 256; @@ -206,7 +206,7 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) if (gpu->identity.vertex_output_buffer_size) { gpu->identity.vertex_output_buffer_size = 1 << gpu->identity.vertex_output_buffer_size; - } else if (gpu->identity.model == 0x0400) { + } else if (gpu->identity.model == chipModel_GC400) { if (gpu->identity.revision < 0x4000) gpu->identity.vertex_output_buffer_size = 512; else if (gpu->identity.revision < 0x4200) @@ -219,9 +219,9 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) switch (gpu->identity.instruction_count) { case 0: - if ((gpu->identity.model == 0x2000 && + if ((gpu->identity.model == chipModel_GC2000 && gpu->identity.revision == 0x5108) || - gpu->identity.model == 0x880) + gpu->identity.model == chipModel_GC880) gpu->identity.instruction_count = 512; else gpu->identity.instruction_count = 256; @@ -253,7 +253,7 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) /* Special case for older graphic cores. */ if (((chipIdentity & VIVS_HI_CHIP_IDENTITY_FAMILY__MASK) >> VIVS_HI_CHIP_IDENTITY_FAMILY__SHIFT) == 0x01) { - gpu->identity.model = 0x500; /* gc500 */ + gpu->identity.model = chipModel_GC500; gpu->identity.revision = (chipIdentity & VIVS_HI_CHIP_IDENTITY_REVISION__MASK) >> VIVS_HI_CHIP_IDENTITY_REVISION__SHIFT; @@ -269,12 +269,12 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) * same. Only for GC400 family. */ if ((gpu->identity.model & 0xff00) == 0x0400 && - gpu->identity.model != 0x0420) { + gpu->identity.model != chipModel_GC420) { gpu->identity.model = gpu->identity.model & 0x0400; } /* Another special case */ - if (gpu->identity.model == 0x300 && + if (gpu->identity.model == chipModel_GC300 && gpu->identity.revision == 0x2201) { u32 chipDate = gpu_read(gpu, VIVS_HI_CHIP_DATE); u32 chipTime = gpu_read(gpu, VIVS_HI_CHIP_TIME); @@ -295,11 +295,13 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) gpu->identity.features = gpu_read(gpu, VIVS_HI_CHIP_FEATURE); /* Disable fast clear on GC700. */ - if (gpu->identity.model == 0x700) + if (gpu->identity.model == chipModel_GC700) gpu->identity.features &= ~chipFeatures_FAST_CLEAR; - if ((gpu->identity.model == 0x500 && gpu->identity.revision < 2) || - (gpu->identity.model == 0x300 && gpu->identity.revision < 0x2000)) { + if ((gpu->identity.model == chipModel_GC500 && + gpu->identity.revision < 2) || + (gpu->identity.model == chipModel_GC300 && + gpu->identity.revision < 0x2000)) { /* * GC500 rev 1.x and GC300 rev < 2.0 doesn't have these @@ -466,7 +468,8 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu) VIVS_HI_AXI_CONFIG_ARCACHE(2)); /* GC2000 rev 5108 needs a special bus config */ - if (gpu->identity.model == 0x2000 && gpu->identity.revision == 0x5108) { + if (gpu->identity.model == chipModel_GC2000 && + gpu->identity.revision == 0x5108) { u32 bus_config = gpu_read(gpu, VIVS_MC_BUS_CONFIG); bus_config &= ~(VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__MASK | VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__MASK); -- cgit v1.2.3 From 52f36ba1d6134f5c1c45deb0da53442a5971358e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:35:54 +0000 Subject: drm/etnaviv: add helper to extract bitfields Add a helper to extract etnaviv bitfields from register values. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 62 +++++++++++++++-------------------- 1 file changed, 27 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 7dc355ef7c4e..2c27fac0d2de 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -120,6 +120,9 @@ int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value) return 0; } +#define etnaviv_field(val, field) \ + (((val) & field##__MASK) >> field##__SHIFT) + static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) { if (gpu->identity.minor_features0 & @@ -129,37 +132,28 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) specs[0] = gpu_read(gpu, VIVS_HI_CHIP_SPECS); specs[1] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_2); - gpu->identity.stream_count = - (specs[0] & VIVS_HI_CHIP_SPECS_STREAM_COUNT__MASK) - >> VIVS_HI_CHIP_SPECS_STREAM_COUNT__SHIFT; - gpu->identity.register_max = - (specs[0] & VIVS_HI_CHIP_SPECS_REGISTER_MAX__MASK) - >> VIVS_HI_CHIP_SPECS_REGISTER_MAX__SHIFT; - gpu->identity.thread_count = - (specs[0] & VIVS_HI_CHIP_SPECS_THREAD_COUNT__MASK) - >> VIVS_HI_CHIP_SPECS_THREAD_COUNT__SHIFT; - gpu->identity.vertex_cache_size = - (specs[0] & VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__MASK) - >> VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE__SHIFT; - gpu->identity.shader_core_count = - (specs[0] & VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__MASK) - >> VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT__SHIFT; - gpu->identity.pixel_pipes = - (specs[0] & VIVS_HI_CHIP_SPECS_PIXEL_PIPES__MASK) - >> VIVS_HI_CHIP_SPECS_PIXEL_PIPES__SHIFT; + gpu->identity.stream_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_STREAM_COUNT); + gpu->identity.register_max = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_REGISTER_MAX); + gpu->identity.thread_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_THREAD_COUNT); + gpu->identity.vertex_cache_size = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_VERTEX_CACHE_SIZE); + gpu->identity.shader_core_count = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_SHADER_CORE_COUNT); + gpu->identity.pixel_pipes = etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_PIXEL_PIPES); gpu->identity.vertex_output_buffer_size = - (specs[0] & VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__MASK) - >> VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE__SHIFT; - - gpu->identity.buffer_size = - (specs[1] & VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__MASK) - >> VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE__SHIFT; - gpu->identity.instruction_count = - (specs[1] & VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__MASK) - >> VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT__SHIFT; - gpu->identity.num_constants = - (specs[1] & VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__MASK) - >> VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS__SHIFT; + etnaviv_field(specs[0], + VIVS_HI_CHIP_SPECS_VERTEX_OUTPUT_BUFFER_SIZE); + + gpu->identity.buffer_size = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_BUFFER_SIZE); + gpu->identity.instruction_count = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT); + gpu->identity.num_constants = etnaviv_field(specs[1], + VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS); } /* Fill in the stream count if not specified */ @@ -251,12 +245,10 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) chipIdentity = gpu_read(gpu, VIVS_HI_CHIP_IDENTITY); /* Special case for older graphic cores. */ - if (((chipIdentity & VIVS_HI_CHIP_IDENTITY_FAMILY__MASK) - >> VIVS_HI_CHIP_IDENTITY_FAMILY__SHIFT) == 0x01) { + if (etnaviv_field(chipIdentity, VIVS_HI_CHIP_IDENTITY_FAMILY) == 0x01) { gpu->identity.model = chipModel_GC500; - gpu->identity.revision = - (chipIdentity & VIVS_HI_CHIP_IDENTITY_REVISION__MASK) - >> VIVS_HI_CHIP_IDENTITY_REVISION__SHIFT; + gpu->identity.revision = etnaviv_field(chipIdentity, + VIVS_HI_CHIP_IDENTITY_REVISION); } else { gpu->identity.model = gpu_read(gpu, VIVS_HI_CHIP_MODEL); -- cgit v1.2.3 From 472f79dcf21d34f4d667910002482efe3ca4ba34 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:35:59 +0000 Subject: drm/etnaviv: add helper for comparing model/revision IDs Add and use a helper for comparing the model and revision IDs. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 2c27fac0d2de..d5fad472e91f 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -120,6 +120,10 @@ int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value) return 0; } + +#define etnaviv_is_model_rev(gpu, mod, rev) \ + ((gpu)->identity.model == chipModel_##mod && \ + (gpu)->identity.revision == rev) #define etnaviv_field(val, field) \ (((val) & field##__MASK) >> field##__SHIFT) @@ -213,8 +217,7 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) switch (gpu->identity.instruction_count) { case 0: - if ((gpu->identity.model == chipModel_GC2000 && - gpu->identity.revision == 0x5108) || + if (etnaviv_is_model_rev(gpu, GC2000, 0x5108) || gpu->identity.model == chipModel_GC880) gpu->identity.instruction_count = 512; else @@ -266,8 +269,7 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) } /* Another special case */ - if (gpu->identity.model == chipModel_GC300 && - gpu->identity.revision == 0x2201) { + if (etnaviv_is_model_rev(gpu, GC300, 0x2201)) { u32 chipDate = gpu_read(gpu, VIVS_HI_CHIP_DATE); u32 chipTime = gpu_read(gpu, VIVS_HI_CHIP_TIME); @@ -435,10 +437,9 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu) { u16 prefetch; - if (gpu->identity.model == chipModel_GC320 && - gpu_read(gpu, VIVS_HI_CHIP_TIME) != 0x2062400 && - (gpu->identity.revision == 0x5007 || - gpu->identity.revision == 0x5220)) { + if ((etnaviv_is_model_rev(gpu, GC320, 0x5007) || + etnaviv_is_model_rev(gpu, GC320, 0x5220)) && + gpu_read(gpu, VIVS_HI_CHIP_TIME) != 0x2062400) { u32 mc_memory_debug; mc_memory_debug = gpu_read(gpu, VIVS_MC_DEBUG_MEMORY) & ~0xff; @@ -460,8 +461,7 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu) VIVS_HI_AXI_CONFIG_ARCACHE(2)); /* GC2000 rev 5108 needs a special bus config */ - if (gpu->identity.model == chipModel_GC2000 && - gpu->identity.revision == 0x5108) { + if (etnaviv_is_model_rev(gpu, GC2000, 0x5108)) { u32 bus_config = gpu_read(gpu, VIVS_MC_BUS_CONFIG); bus_config &= ~(VIVS_MC_BUS_CONFIG_FE_BUS_CONFIG__MASK | VIVS_MC_BUS_CONFIG_TX_BUS_CONFIG__MASK); -- cgit v1.2.3 From 602eb48966d7b7f7e64dca8d9ea2842d83bfae73 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jan 2016 17:36:04 +0000 Subject: drm/etnaviv: add further minor features and varyings count Export further minor feature bitmasks and the varyings count from the GPU specifications registers to userspace. Acked-by: Christian Gmeiner Signed-off-by: Russell King Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 62 ++++++++++++++++++++++++++++++++++- drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 9 +++++ include/uapi/drm/etnaviv_drm.h | 3 ++ 3 files changed, 73 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index d5fad472e91f..7b511ad9f54b 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -72,6 +72,14 @@ int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value) *value = gpu->identity.minor_features3; break; + case ETNAVIV_PARAM_GPU_FEATURES_5: + *value = gpu->identity.minor_features4; + break; + + case ETNAVIV_PARAM_GPU_FEATURES_6: + *value = gpu->identity.minor_features5; + break; + case ETNAVIV_PARAM_GPU_STREAM_COUNT: *value = gpu->identity.stream_count; break; @@ -112,6 +120,10 @@ int etnaviv_gpu_get_param(struct etnaviv_gpu *gpu, u32 param, u64 *value) *value = gpu->identity.num_constants; break; + case ETNAVIV_PARAM_GPU_NUM_VARYINGS: + *value = gpu->identity.varyings_count; + break; + default: DBG("%s: invalid param: %u", dev_name(gpu->dev), param); return -EINVAL; @@ -131,10 +143,13 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) { if (gpu->identity.minor_features0 & chipMinorFeatures0_MORE_MINOR_FEATURES) { - u32 specs[2]; + u32 specs[4]; + unsigned int streams; specs[0] = gpu_read(gpu, VIVS_HI_CHIP_SPECS); specs[1] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_2); + specs[2] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_3); + specs[3] = gpu_read(gpu, VIVS_HI_CHIP_SPECS_4); gpu->identity.stream_count = etnaviv_field(specs[0], VIVS_HI_CHIP_SPECS_STREAM_COUNT); @@ -158,6 +173,15 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) VIVS_HI_CHIP_SPECS_2_INSTRUCTION_COUNT); gpu->identity.num_constants = etnaviv_field(specs[1], VIVS_HI_CHIP_SPECS_2_NUM_CONSTANTS); + + gpu->identity.varyings_count = etnaviv_field(specs[2], + VIVS_HI_CHIP_SPECS_3_VARYINGS_COUNT); + + /* This overrides the value from older register if non-zero */ + streams = etnaviv_field(specs[3], + VIVS_HI_CHIP_SPECS_4_STREAM_COUNT); + if (streams) + gpu->identity.stream_count = streams; } /* Fill in the stream count if not specified */ @@ -239,6 +263,30 @@ static void etnaviv_hw_specs(struct etnaviv_gpu *gpu) if (gpu->identity.num_constants == 0) gpu->identity.num_constants = 168; + + if (gpu->identity.varyings_count == 0) { + if (gpu->identity.minor_features1 & chipMinorFeatures1_HALTI0) + gpu->identity.varyings_count = 12; + else + gpu->identity.varyings_count = 8; + } + + /* + * For some cores, two varyings are consumed for position, so the + * maximum varying count needs to be reduced by one. + */ + if (etnaviv_is_model_rev(gpu, GC5000, 0x5434) || + etnaviv_is_model_rev(gpu, GC4000, 0x5222) || + etnaviv_is_model_rev(gpu, GC4000, 0x5245) || + etnaviv_is_model_rev(gpu, GC4000, 0x5208) || + etnaviv_is_model_rev(gpu, GC3000, 0x5435) || + etnaviv_is_model_rev(gpu, GC2200, 0x5244) || + etnaviv_is_model_rev(gpu, GC2100, 0x5108) || + etnaviv_is_model_rev(gpu, GC2000, 0x5108) || + etnaviv_is_model_rev(gpu, GC1500, 0x5246) || + etnaviv_is_model_rev(gpu, GC880, 0x5107) || + etnaviv_is_model_rev(gpu, GC880, 0x5106)) + gpu->identity.varyings_count -= 1; } static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) @@ -305,6 +353,8 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) gpu->identity.minor_features1 = 0; gpu->identity.minor_features2 = 0; gpu->identity.minor_features3 = 0; + gpu->identity.minor_features4 = 0; + gpu->identity.minor_features5 = 0; } else gpu->identity.minor_features0 = gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_0); @@ -317,6 +367,10 @@ static void etnaviv_hw_identify(struct etnaviv_gpu *gpu) gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_2); gpu->identity.minor_features3 = gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_3); + gpu->identity.minor_features4 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_4); + gpu->identity.minor_features5 = + gpu_read(gpu, VIVS_HI_CHIP_MINOR_FEATURE_5); } /* GC600 idle register reports zero bits where modules aren't present */ @@ -645,6 +699,10 @@ int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m) gpu->identity.minor_features2); seq_printf(m, "\t minor_features3: 0x%08x\n", gpu->identity.minor_features3); + seq_printf(m, "\t minor_features4: 0x%08x\n", + gpu->identity.minor_features4); + seq_printf(m, "\t minor_features5: 0x%08x\n", + gpu->identity.minor_features5); seq_puts(m, "\tspecs\n"); seq_printf(m, "\t stream_count: %d\n", @@ -667,6 +725,8 @@ int etnaviv_gpu_debugfs(struct etnaviv_gpu *gpu, struct seq_file *m) gpu->identity.instruction_count); seq_printf(m, "\t num_constants: %d\n", gpu->identity.num_constants); + seq_printf(m, "\t varyings_count: %d\n", + gpu->identity.varyings_count); seq_printf(m, "\taxi: 0x%08x\n", axi); seq_printf(m, "\tidle: 0x%08x\n", idle); diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h index c75d50359ab0..f233ac4c7c1c 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h @@ -46,6 +46,12 @@ struct etnaviv_chip_identity { /* Supported minor feature 3 fields. */ u32 minor_features3; + /* Supported minor feature 4 fields. */ + u32 minor_features4; + + /* Supported minor feature 5 fields. */ + u32 minor_features5; + /* Number of streams supported. */ u32 stream_count; @@ -75,6 +81,9 @@ struct etnaviv_chip_identity { /* Buffer size */ u32 buffer_size; + + /* Number of varyings */ + u8 varyings_count; }; struct etnaviv_event { diff --git a/include/uapi/drm/etnaviv_drm.h b/include/uapi/drm/etnaviv_drm.h index 4cc989ad6851..f95e1c43c3fb 100644 --- a/include/uapi/drm/etnaviv_drm.h +++ b/include/uapi/drm/etnaviv_drm.h @@ -48,6 +48,8 @@ struct drm_etnaviv_timespec { #define ETNAVIV_PARAM_GPU_FEATURES_2 0x05 #define ETNAVIV_PARAM_GPU_FEATURES_3 0x06 #define ETNAVIV_PARAM_GPU_FEATURES_4 0x07 +#define ETNAVIV_PARAM_GPU_FEATURES_5 0x08 +#define ETNAVIV_PARAM_GPU_FEATURES_6 0x09 #define ETNAVIV_PARAM_GPU_STREAM_COUNT 0x10 #define ETNAVIV_PARAM_GPU_REGISTER_MAX 0x11 @@ -59,6 +61,7 @@ struct drm_etnaviv_timespec { #define ETNAVIV_PARAM_GPU_BUFFER_SIZE 0x17 #define ETNAVIV_PARAM_GPU_INSTRUCTION_COUNT 0x18 #define ETNAVIV_PARAM_GPU_NUM_CONSTANTS 0x19 +#define ETNAVIV_PARAM_GPU_NUM_VARYINGS 0x1a #define ETNA_MAX_PIPES 4 -- cgit v1.2.3 From 45d16a6d94580cd3c6baed69b5fe441ece599fc4 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 25 Jan 2016 12:41:05 +0100 Subject: drm/etnaviv: fix memory leak in IOMMU init path Plug in error handling to free any allocated ressources in the IOMMU init path. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 7b511ad9f54b..a33162cf4f4c 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -596,10 +596,9 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) goto fail; } - /* TODO: we will leak here memory - fix it! */ - gpu->mmu = etnaviv_iommu_new(gpu, iommu, version); if (!gpu->mmu) { + iommu_domain_free(iommu); ret = -ENOMEM; goto fail; } @@ -609,7 +608,7 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) if (!gpu->buffer) { ret = -ENOMEM; dev_err(gpu->dev, "could not create command buffer\n"); - goto fail; + goto destroy_iommu; } if (gpu->buffer->paddr - gpu->memory_base > 0x80000000) { ret = -EINVAL; @@ -639,6 +638,9 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu) free_buffer: etnaviv_gpu_cmdbuf_free(gpu->buffer); gpu->buffer = NULL; +destroy_iommu: + etnaviv_iommu_destroy(gpu->mmu); + gpu->mmu = NULL; fail: pm_runtime_mark_last_busy(gpu->dev); pm_runtime_put_autosuspend(gpu->dev); -- cgit v1.2.3 From 9f07bb0d4ada68f05b2e51c10720d4688e6adea4 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 25 Jan 2016 15:37:28 +0100 Subject: drm/etnaviv: fix get pages error path in etnaviv_gem_vaddr In case that etnaviv_gem_get_pages is unable to get the required pages the object mutex needs to be unlocked. Also return NULL in this case instead of propagating the error, as callers of this function might not be prepared to handle a pointer error, but expect this call to follow the semantics of a plain vmap to return NULL in case of an error. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_dump.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c index fd7d3e989e79..09a759e69dd2 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c @@ -216,7 +216,7 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu) iter.hdr->iova = cpu_to_le64(vram->iova); vaddr = etnaviv_gem_vaddr(&obj->base); - if (vaddr && !IS_ERR(vaddr)) + if (vaddr) memcpy(iter.data, vaddr, obj->base.size); etnaviv_core_dump_header(&iter, ETDUMP_BUF_BO, iter.data + diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index 9f77c3b94cc6..b22712fdd31e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -361,8 +361,10 @@ void *etnaviv_gem_vaddr(struct drm_gem_object *obj) if (!etnaviv_obj->vaddr) { struct page **pages = etnaviv_gem_get_pages(etnaviv_obj); - if (IS_ERR(pages)) - return ERR_CAST(pages); + if (IS_ERR(pages)) { + mutex_unlock(&etnaviv_obj->lock); + return NULL; + } etnaviv_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT, VM_MAP, pgprot_writecombine(PAGE_KERNEL)); -- cgit v1.2.3 From ce3088fdb51eda7b9ef3d119e7c302c08428f274 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 26 Jan 2016 18:10:32 +0100 Subject: drm/etnaviv: rename etnaviv_gem_vaddr to etnaviv_gem_vmap This function follows the semantics of vmap() by returning NULL in case of an error. To make things less confusing rename it to make make both functions more closely related. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_drv.h | 2 +- drivers/gpu/drm/etnaviv/etnaviv_dump.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 2 +- drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.h b/drivers/gpu/drm/etnaviv/etnaviv_drv.h index d6bd438bd5be..1cd6046e76b1 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.h +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.h @@ -85,7 +85,7 @@ struct drm_gem_object *etnaviv_gem_prime_import_sg_table(struct drm_device *dev, struct dma_buf_attachment *attach, struct sg_table *sg); int etnaviv_gem_prime_pin(struct drm_gem_object *obj); void etnaviv_gem_prime_unpin(struct drm_gem_object *obj); -void *etnaviv_gem_vaddr(struct drm_gem_object *obj); +void *etnaviv_gem_vmap(struct drm_gem_object *obj); int etnaviv_gem_cpu_prep(struct drm_gem_object *obj, u32 op, struct timespec *timeout); int etnaviv_gem_cpu_fini(struct drm_gem_object *obj); diff --git a/drivers/gpu/drm/etnaviv/etnaviv_dump.c b/drivers/gpu/drm/etnaviv/etnaviv_dump.c index 09a759e69dd2..4a29eeadbf1e 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_dump.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_dump.c @@ -215,7 +215,7 @@ void etnaviv_core_dump(struct etnaviv_gpu *gpu) iter.hdr->iova = cpu_to_le64(vram->iova); - vaddr = etnaviv_gem_vaddr(&obj->base); + vaddr = etnaviv_gem_vmap(&obj->base); if (vaddr) memcpy(iter.data, vaddr, obj->base.size); diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index b22712fdd31e..1da3d48054c2 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -353,7 +353,7 @@ void etnaviv_gem_put_iova(struct etnaviv_gpu *gpu, struct drm_gem_object *obj) drm_gem_object_unreference_unlocked(obj); } -void *etnaviv_gem_vaddr(struct drm_gem_object *obj) +void *etnaviv_gem_vmap(struct drm_gem_object *obj) { struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c index e94db4f95770..9c054b6c24d6 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c @@ -31,7 +31,7 @@ struct sg_table *etnaviv_gem_prime_get_sg_table(struct drm_gem_object *obj) void *etnaviv_gem_prime_vmap(struct drm_gem_object *obj) { - return etnaviv_gem_vaddr(obj); + return etnaviv_gem_vmap(obj); } void etnaviv_gem_prime_vunmap(struct drm_gem_object *obj, void *vaddr) -- cgit v1.2.3 From a0a5ab3e99b8e617221caabf074dcabd1659b9d8 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 25 Jan 2016 15:47:28 +0100 Subject: drm/etnaviv: call correct function when trying to vmap a DMABUF When trying to get the vmap address of an imported buffer, we must call into the appropriate helper function, to allow the exporter to establish the vmap, instead of trying to vmap the buffer on our own. Add an indirection through etnaviv_gem_ops to allow the correct implementation to be called. Signed-off-by: Lucas Stach --- drivers/gpu/drm/etnaviv/etnaviv_gem.c | 36 ++++++++++++++++++++--------- drivers/gpu/drm/etnaviv/etnaviv_gem.h | 1 + drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c | 8 +++++++ 3 files changed, 34 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.c b/drivers/gpu/drm/etnaviv/etnaviv_gem.c index 1da3d48054c2..4b519e4309b2 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.c @@ -357,23 +357,35 @@ void *etnaviv_gem_vmap(struct drm_gem_object *obj) { struct etnaviv_gem_object *etnaviv_obj = to_etnaviv_bo(obj); - mutex_lock(&etnaviv_obj->lock); - if (!etnaviv_obj->vaddr) { - struct page **pages = etnaviv_gem_get_pages(etnaviv_obj); - - if (IS_ERR(pages)) { - mutex_unlock(&etnaviv_obj->lock); - return NULL; - } + if (etnaviv_obj->vaddr) + return etnaviv_obj->vaddr; - etnaviv_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT, - VM_MAP, pgprot_writecombine(PAGE_KERNEL)); - } + mutex_lock(&etnaviv_obj->lock); + /* + * Need to check again, as we might have raced with another thread + * while waiting for the mutex. + */ + if (!etnaviv_obj->vaddr) + etnaviv_obj->vaddr = etnaviv_obj->ops->vmap(etnaviv_obj); mutex_unlock(&etnaviv_obj->lock); return etnaviv_obj->vaddr; } +static void *etnaviv_gem_vmap_impl(struct etnaviv_gem_object *obj) +{ + struct page **pages; + + lockdep_assert_held(&obj->lock); + + pages = etnaviv_gem_get_pages(obj); + if (IS_ERR(pages)) + return NULL; + + return vmap(pages, obj->base.size >> PAGE_SHIFT, + VM_MAP, pgprot_writecombine(PAGE_KERNEL)); +} + static inline enum dma_data_direction etnaviv_op_to_dma_dir(u32 op) { if (op & ETNA_PREP_READ) @@ -524,6 +536,7 @@ static void etnaviv_gem_shmem_release(struct etnaviv_gem_object *etnaviv_obj) static const struct etnaviv_gem_ops etnaviv_gem_shmem_ops = { .get_pages = etnaviv_gem_shmem_get_pages, .release = etnaviv_gem_shmem_release, + .vmap = etnaviv_gem_vmap_impl, }; void etnaviv_gem_free_object(struct drm_gem_object *obj) @@ -868,6 +881,7 @@ static void etnaviv_gem_userptr_release(struct etnaviv_gem_object *etnaviv_obj) static const struct etnaviv_gem_ops etnaviv_gem_userptr_ops = { .get_pages = etnaviv_gem_userptr_get_pages, .release = etnaviv_gem_userptr_release, + .vmap = etnaviv_gem_vmap_impl, }; int etnaviv_gem_new_userptr(struct drm_device *dev, struct drm_file *file, diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem.h b/drivers/gpu/drm/etnaviv/etnaviv_gem.h index a300b4b3d545..ab5df8147a5f 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem.h +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem.h @@ -78,6 +78,7 @@ struct etnaviv_gem_object *to_etnaviv_bo(struct drm_gem_object *obj) struct etnaviv_gem_ops { int (*get_pages)(struct etnaviv_gem_object *); void (*release)(struct etnaviv_gem_object *); + void *(*vmap)(struct etnaviv_gem_object *); }; static inline bool is_active(struct etnaviv_gem_object *etnaviv_obj) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c index 9c054b6c24d6..4e67395f5fa1 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c @@ -77,9 +77,17 @@ static void etnaviv_gem_prime_release(struct etnaviv_gem_object *etnaviv_obj) drm_prime_gem_destroy(&etnaviv_obj->base, etnaviv_obj->sgt); } +static void *etnaviv_gem_prime_vmap_impl(struct etnaviv_gem_object *etnaviv_obj) +{ + lockdep_assert_held(&etnaviv_obj->lock); + + return dma_buf_vmap(etnaviv_obj->base.import_attach->dmabuf); +} + static const struct etnaviv_gem_ops etnaviv_gem_prime_ops = { /* .get_pages should never be called */ .release = etnaviv_gem_prime_release, + .vmap = etnaviv_gem_prime_vmap_impl, }; struct drm_gem_object *etnaviv_gem_prime_import_sg_table(struct drm_device *dev, -- cgit v1.2.3 From 13b4389143413a1f18127c07f72c74cad5b563e8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 20 Jan 2016 11:26:01 -0500 Subject: SCSI: fix crashes in sd and sr runtime PM Runtime suspend during driver probe and removal can cause problems. The driver's runtime_suspend or runtime_resume callbacks may invoked before the driver has finished binding to the device or after the driver has unbound from the device. This problem shows up with the sd and sr drivers, and can cause disk or CD/DVD drives to become unusable as a result. The fix is simple. The drivers store a pointer to the scsi_disk or scsi_cd structure as their private device data when probing is finished, so we simply have to be sure to clear the private data during removal and test it during runtime suspend/resume. This fixes . Signed-off-by: Alan Stern Reported-by: Paul Menzel Reported-by: Erich Schubert Reported-by: Alexandre Rossi Tested-by: Paul Menzel Tested-by: Erich Schubert CC: Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 7 +++++-- drivers/scsi/sr.c | 4 ++++ 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 4e08d1cd704d..84fa4c46eaa6 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3268,8 +3268,8 @@ static int sd_suspend_common(struct device *dev, bool ignore_stop_errors) struct scsi_disk *sdkp = dev_get_drvdata(dev); int ret = 0; - if (!sdkp) - return 0; /* this can happen */ + if (!sdkp) /* E.g.: runtime suspend following sd_remove() */ + return 0; if (sdkp->WCE && sdkp->media_present) { sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); @@ -3308,6 +3308,9 @@ static int sd_resume(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); + if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ + return 0; + if (!sdkp->device->manage_start_stop) return 0; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 8bd54a64efd6..64c867405ad4 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -144,6 +144,9 @@ static int sr_runtime_suspend(struct device *dev) { struct scsi_cd *cd = dev_get_drvdata(dev); + if (!cd) /* E.g.: runtime suspend following sr_remove() */ + return 0; + if (cd->media_present) return -EBUSY; else @@ -985,6 +988,7 @@ static int sr_remove(struct device *dev) scsi_autopm_get_device(cd->device); del_gendisk(cd->disk); + dev_set_drvdata(dev, NULL); mutex_lock(&sr_ref_mutex); kref_put(&cd->kref, sr_kref_release); -- cgit v1.2.3 From 49f34134aea74f19ca016f055d25ee55ec359dee Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Wed, 13 Jan 2016 16:19:50 +0900 Subject: irqchip/atmel-aic: Fix wrong bit operation for IRQ priority Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb7720 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by: Milo Kim Acked-by: Boris Brezillon Cc: Jason Cooper Cc: Marc Zyngier Cc: Ludovic Desroches Cc: Nicholas Ferre Cc: stable@vger.kernel.org #v3.17+ Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-atmel-aic-common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-atmel-aic-common.c b/drivers/irqchip/irq-atmel-aic-common.c index b12a5d58546f..37199b9b2cfa 100644 --- a/drivers/irqchip/irq-atmel-aic-common.c +++ b/drivers/irqchip/irq-atmel-aic-common.c @@ -86,7 +86,7 @@ int aic_common_set_priority(int priority, unsigned *val) priority > AT91_AIC_IRQ_MAX_PRIORITY) return -EINVAL; - *val &= AT91_AIC_PRIOR; + *val &= ~AT91_AIC_PRIOR; *val |= priority; return 0; -- cgit v1.2.3 From b3c6de492b9ea30a8dcc535d4dc2eaaf0bb3f116 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 21 Jan 2016 16:47:29 +0100 Subject: cleancache: constify cleancache_ops structure The cleancache_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 2 +- include/linux/cleancache.h | 2 +- mm/cleancache.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 945fc4327201..4ac2ca8a7656 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -242,7 +242,7 @@ static int tmem_cleancache_init_shared_fs(char *uuid, size_t pagesize) return xen_tmem_new_pool(shared_uuid, TMEM_POOL_SHARED, pagesize); } -static struct cleancache_ops tmem_cleancache_ops = { +static const struct cleancache_ops tmem_cleancache_ops = { .put_page = tmem_cleancache_put_page, .get_page = tmem_cleancache_get_page, .invalidate_page = tmem_cleancache_flush_page, diff --git a/include/linux/cleancache.h b/include/linux/cleancache.h index bda5ec0b4b4d..cb3e14234502 100644 --- a/include/linux/cleancache.h +++ b/include/linux/cleancache.h @@ -37,7 +37,7 @@ struct cleancache_ops { void (*invalidate_fs)(int); }; -extern int cleancache_register_ops(struct cleancache_ops *ops); +extern int cleancache_register_ops(const struct cleancache_ops *ops); extern void __cleancache_init_fs(struct super_block *); extern void __cleancache_init_shared_fs(struct super_block *); extern int __cleancache_get_page(struct page *); diff --git a/mm/cleancache.c b/mm/cleancache.c index 8fc50811119b..ba5d8f3e6d68 100644 --- a/mm/cleancache.c +++ b/mm/cleancache.c @@ -22,7 +22,7 @@ * cleancache_ops is set by cleancache_register_ops to contain the pointers * to the cleancache "backend" implementation functions. */ -static struct cleancache_ops *cleancache_ops __read_mostly; +static const struct cleancache_ops *cleancache_ops __read_mostly; /* * Counters available via /sys/kernel/debug/cleancache (if debugfs is @@ -49,7 +49,7 @@ static void cleancache_register_ops_sb(struct super_block *sb, void *unused) /* * Register operations for cleancache. Returns 0 on success. */ -int cleancache_register_ops(struct cleancache_ops *ops) +int cleancache_register_ops(const struct cleancache_ops *ops) { if (cmpxchg(&cleancache_ops, NULL, ops)) return -EBUSY; -- cgit v1.2.3 From 08b21d30c6f619aa3718620a7de91207d28bdbc5 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 21 Jan 2016 19:24:44 +0800 Subject: drm/amd/powerplay: Update SMU firmware loading for Stoney Fix firmware init on Stoney when powerplay is enabled. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smumgr/cz_smumgr.c | 41 ++++++++++++++++++------ 1 file changed, 32 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/cz_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/cz_smumgr.c index 873a8d264d5c..ec222c665602 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/cz_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/cz_smumgr.c @@ -272,6 +272,9 @@ static int cz_start_smu(struct pp_smumgr *smumgr) UCODE_ID_CP_MEC_JT1_MASK | UCODE_ID_CP_MEC_JT2_MASK; + if (smumgr->chip_id == CHIP_STONEY) + fw_to_check &= ~(UCODE_ID_SDMA1_MASK | UCODE_ID_CP_MEC_JT2_MASK); + cz_request_smu_load_fw(smumgr); cz_check_fw_load_finish(smumgr, fw_to_check); @@ -282,7 +285,7 @@ static int cz_start_smu(struct pp_smumgr *smumgr) return ret; } -static uint8_t cz_translate_firmware_enum_to_arg( +static uint8_t cz_translate_firmware_enum_to_arg(struct pp_smumgr *smumgr, enum cz_scratch_entry firmware_enum) { uint8_t ret = 0; @@ -292,7 +295,10 @@ static uint8_t cz_translate_firmware_enum_to_arg( ret = UCODE_ID_SDMA0; break; case CZ_SCRATCH_ENTRY_UCODE_ID_SDMA1: - ret = UCODE_ID_SDMA1; + if (smumgr->chip_id == CHIP_STONEY) + ret = UCODE_ID_SDMA0; + else + ret = UCODE_ID_SDMA1; break; case CZ_SCRATCH_ENTRY_UCODE_ID_CP_CE: ret = UCODE_ID_CP_CE; @@ -307,7 +313,10 @@ static uint8_t cz_translate_firmware_enum_to_arg( ret = UCODE_ID_CP_MEC_JT1; break; case CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT2: - ret = UCODE_ID_CP_MEC_JT2; + if (smumgr->chip_id == CHIP_STONEY) + ret = UCODE_ID_CP_MEC_JT1; + else + ret = UCODE_ID_CP_MEC_JT2; break; case CZ_SCRATCH_ENTRY_UCODE_ID_GMCON_RENG: ret = UCODE_ID_GMCON_RENG; @@ -396,7 +405,7 @@ static int cz_smu_populate_single_scratch_task( struct SMU_Task *task = &toc->tasks[cz_smu->toc_entry_used_count++]; task->type = type; - task->arg = cz_translate_firmware_enum_to_arg(fw_enum); + task->arg = cz_translate_firmware_enum_to_arg(smumgr, fw_enum); task->next = is_last ? END_OF_TASK_LIST : cz_smu->toc_entry_used_count; for (i = 0; i < cz_smu->scratch_buffer_length; i++) @@ -433,7 +442,7 @@ static int cz_smu_populate_single_ucode_load_task( struct SMU_Task *task = &toc->tasks[cz_smu->toc_entry_used_count++]; task->type = TASK_TYPE_UCODE_LOAD; - task->arg = cz_translate_firmware_enum_to_arg(fw_enum); + task->arg = cz_translate_firmware_enum_to_arg(smumgr, fw_enum); task->next = is_last ? END_OF_TASK_LIST : cz_smu->toc_entry_used_count; for (i = 0; i < cz_smu->driver_buffer_length; i++) @@ -509,8 +518,14 @@ static int cz_smu_construct_toc_for_vddgfx_exit(struct pp_smumgr *smumgr) CZ_SCRATCH_ENTRY_UCODE_ID_CP_ME, false); cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT1, false); - cz_smu_populate_single_ucode_load_task(smumgr, + + if (smumgr->chip_id == CHIP_STONEY) + cz_smu_populate_single_ucode_load_task(smumgr, + CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT1, false); + else + cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT2, false); + cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_RLC_G, false); @@ -551,7 +566,11 @@ static int cz_smu_construct_toc_for_bootup(struct pp_smumgr *smumgr) cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_SDMA0, false); - cz_smu_populate_single_ucode_load_task(smumgr, + if (smumgr->chip_id == CHIP_STONEY) + cz_smu_populate_single_ucode_load_task(smumgr, + CZ_SCRATCH_ENTRY_UCODE_ID_SDMA0, false); + else + cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_SDMA1, false); cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_CP_CE, false); @@ -561,7 +580,11 @@ static int cz_smu_construct_toc_for_bootup(struct pp_smumgr *smumgr) CZ_SCRATCH_ENTRY_UCODE_ID_CP_ME, false); cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT1, false); - cz_smu_populate_single_ucode_load_task(smumgr, + if (smumgr->chip_id == CHIP_STONEY) + cz_smu_populate_single_ucode_load_task(smumgr, + CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT1, false); + else + cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_CP_MEC_JT2, false); cz_smu_populate_single_ucode_load_task(smumgr, CZ_SCRATCH_ENTRY_UCODE_ID_RLC_G, true); @@ -618,7 +641,7 @@ static int cz_smu_populate_firmware_entries(struct pp_smumgr *smumgr) for (i = 0; i < sizeof(firmware_list)/sizeof(*firmware_list); i++) { - firmware_type = cz_translate_firmware_enum_to_arg( + firmware_type = cz_translate_firmware_enum_to_arg(smumgr, firmware_list[i]); ucode_id = cz_convert_fw_type_to_cgs(firmware_type); -- cgit v1.2.3 From c9a392eac18409f51a071520cf508c0b4ad990e2 Mon Sep 17 00:00:00 2001 From: Slava Grigorev Date: Tue, 26 Jan 2016 16:45:10 -0500 Subject: drm/radeon: cleaned up VCO output settings for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is preparation for the fixes in the following patches. Signed-off-by: Slava Grigorev Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/dce6_afmt.c | 2 +- drivers/gpu/drm/radeon/radeon.h | 2 +- drivers/gpu/drm/radeon/radeon_atombios.c | 12 +++++++----- drivers/gpu/drm/radeon/radeon_audio.c | 8 +------- 4 files changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index 6bfc46369db1..ea4e3fc2744f 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -315,7 +315,7 @@ void dce6_dp_audio_set_dto(struct radeon_device *rdev, div = 0; if (div) - clock = rdev->clock.gpupll_outputfreq * 10 / div; + clock /= div; WREG32(DCE8_DCCG_AUDIO_DTO1_PHASE, 24000); WREG32(DCE8_DCCG_AUDIO_DTO1_MODULE, clock); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 5ae6db98aa4d..78a51b3eda10 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -268,7 +268,7 @@ struct radeon_clock { uint32_t current_dispclk; uint32_t dp_extclk; uint32_t max_pixel_clock; - uint32_t gpupll_outputfreq; + uint32_t vco_freq; }; /* diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 08fc1b5effa8..9a9363a7e5b9 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1257,12 +1257,14 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) rdev->mode_info.firmware_flags = le16_to_cpu(firmware_info->info.usFirmwareCapability.susAccess); - if (ASIC_IS_DCE8(rdev)) { - rdev->clock.gpupll_outputfreq = + if (ASIC_IS_DCE8(rdev)) + rdev->clock.vco_freq = le32_to_cpu(firmware_info->info_22.ulGPUPLL_OutputFreq); - if (rdev->clock.gpupll_outputfreq == 0) - rdev->clock.gpupll_outputfreq = 360000; /* 3.6 GHz */ - } + else + rdev->clock.vco_freq = rdev->clock.current_dispclk; + + if (rdev->clock.vco_freq == 0) + rdev->clock.vco_freq = 360000; /* 3.6 GHz */ return true; } diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 2c02e99b5f95..85e1c234f020 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -739,9 +739,6 @@ static void radeon_audio_dp_mode_set(struct drm_encoder *encoder, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); - struct radeon_connector *radeon_connector = to_radeon_connector(connector); - struct radeon_connector_atom_dig *dig_connector = - radeon_connector->con_priv; if (!dig || !dig->afmt) return; @@ -753,10 +750,7 @@ static void radeon_audio_dp_mode_set(struct drm_encoder *encoder, radeon_audio_write_speaker_allocation(encoder); radeon_audio_write_sad_regs(encoder); radeon_audio_write_latency_fields(encoder, mode); - if (rdev->clock.dp_extclk || ASIC_IS_DCE5(rdev)) - radeon_audio_set_dto(encoder, rdev->clock.default_dispclk * 10); - else - radeon_audio_set_dto(encoder, dig_connector->dp_clock); + radeon_audio_set_dto(encoder, rdev->clock.vco_freq * 10); radeon_audio_set_audio_packet(encoder); radeon_audio_select_pin(encoder); -- cgit v1.2.3 From a64c9dab1c4d05c87ec8a1cb9b48915816462143 Mon Sep 17 00:00:00 2001 From: Slava Grigorev Date: Tue, 26 Jan 2016 16:56:25 -0500 Subject: drm/radeon: Add a common function for DFS handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move encoding of DFS (digital frequency synthesizer) divider into a separate function and improve calculation precision. Signed-off-by: Slava Grigorev Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/dce6_afmt.c | 12 ++---------- drivers/gpu/drm/radeon/radeon_audio.c | 12 ++++++++++++ drivers/gpu/drm/radeon/radeon_audio.h | 1 + 3 files changed, 15 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/dce6_afmt.c b/drivers/gpu/drm/radeon/dce6_afmt.c index ea4e3fc2744f..367a916f364e 100644 --- a/drivers/gpu/drm/radeon/dce6_afmt.c +++ b/drivers/gpu/drm/radeon/dce6_afmt.c @@ -304,18 +304,10 @@ void dce6_dp_audio_set_dto(struct radeon_device *rdev, unsigned int div = (RREG32(DENTIST_DISPCLK_CNTL) & DENTIST_DPREFCLK_WDIVIDER_MASK) >> DENTIST_DPREFCLK_WDIVIDER_SHIFT; - - if (div < 128 && div >= 96) - div -= 64; - else if (div >= 64) - div = div / 2 - 16; - else if (div >= 8) - div /= 4; - else - div = 0; + div = radeon_audio_decode_dfs_div(div); if (div) - clock /= div; + clock = clock * 100 / div; WREG32(DCE8_DCCG_AUDIO_DTO1_PHASE, 24000); WREG32(DCE8_DCCG_AUDIO_DTO1_MODULE, clock); diff --git a/drivers/gpu/drm/radeon/radeon_audio.c b/drivers/gpu/drm/radeon/radeon_audio.c index 85e1c234f020..b214663b370d 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.c +++ b/drivers/gpu/drm/radeon/radeon_audio.c @@ -775,3 +775,15 @@ void radeon_audio_dpms(struct drm_encoder *encoder, int mode) if (radeon_encoder->audio && radeon_encoder->audio->dpms) radeon_encoder->audio->dpms(encoder, mode == DRM_MODE_DPMS_ON); } + +unsigned int radeon_audio_decode_dfs_div(unsigned int div) +{ + if (div >= 8 && div < 64) + return (div - 8) * 25 + 200; + else if (div >= 64 && div < 96) + return (div - 64) * 50 + 1600; + else if (div >= 96 && div < 128) + return (div - 96) * 100 + 3200; + else + return 0; +} diff --git a/drivers/gpu/drm/radeon/radeon_audio.h b/drivers/gpu/drm/radeon/radeon_audio.h index 059cc3012062..5c70cceaa4a6 100644 --- a/drivers/gpu/drm/radeon/radeon_audio.h +++ b/drivers/gpu/drm/radeon/radeon_audio.h @@ -79,5 +79,6 @@ void radeon_audio_fini(struct radeon_device *rdev); void radeon_audio_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode); void radeon_audio_dpms(struct drm_encoder *encoder, int mode); +unsigned int radeon_audio_decode_dfs_div(unsigned int div); #endif -- cgit v1.2.3 From fe6fc1f132b4300c1f6defd43a5d673eb60a820d Mon Sep 17 00:00:00 2001 From: Slava Grigorev Date: Tue, 26 Jan 2016 17:35:57 -0500 Subject: drm/radeon: fix DP audio support for APU with DCE4.1 display engine MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Properly setup the DFS divider for DP audio for DCE4.1. Signed-off-by: Slava Grigorev Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 10 +++++++++ drivers/gpu/drm/radeon/evergreend.h | 5 +++++ drivers/gpu/drm/radeon/radeon_atombios.c | 37 +++++++++++++++++++++++++------- 3 files changed, 44 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index 9953356fe263..3cf04a2f44bb 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -289,6 +289,16 @@ void dce4_dp_audio_set_dto(struct radeon_device *rdev, * number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator */ + if (ASIC_IS_DCE41(rdev)) { + unsigned int div = (RREG32(DCE41_DENTIST_DISPCLK_CNTL) & + DENTIST_DPREFCLK_WDIVIDER_MASK) >> + DENTIST_DPREFCLK_WDIVIDER_SHIFT; + div = radeon_audio_decode_dfs_div(div); + + if (div) + clock = 100 * clock / div; + } + WREG32(DCCG_AUDIO_DTO1_PHASE, 24000); WREG32(DCCG_AUDIO_DTO1_MODULE, clock); } diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 4aa5f755572b..13b6029d65cc 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -511,6 +511,11 @@ #define DCCG_AUDIO_DTO1_CNTL 0x05cc # define DCCG_AUDIO_DTO1_USE_512FBR_DTO (1 << 3) +#define DCE41_DENTIST_DISPCLK_CNTL 0x049c +# define DENTIST_DPREFCLK_WDIVIDER(x) (((x) & 0x7f) << 24) +# define DENTIST_DPREFCLK_WDIVIDER_MASK (0x7f << 24) +# define DENTIST_DPREFCLK_WDIVIDER_SHIFT 24 + /* DCE 4.0 AFMT */ #define HDMI_CONTROL 0x7030 # define HDMI_KEEPOUT_MODE (1 << 0) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 9a9363a7e5b9..de9a2ffcf5f7 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1106,6 +1106,31 @@ union firmware_info { ATOM_FIRMWARE_INFO_V2_2 info_22; }; +union igp_info { + struct _ATOM_INTEGRATED_SYSTEM_INFO info; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 info_6; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 info_7; + struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 info_8; +}; + +static void radeon_atombios_get_dentist_vco_freq(struct radeon_device *rdev) +{ + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo); + union igp_info *igp_info; + u8 frev, crev; + u16 data_offset; + + if (atom_parse_data_header(mode_info->atom_context, index, NULL, + &frev, &crev, &data_offset)) { + igp_info = (union igp_info *)(mode_info->atom_context->bios + + data_offset); + rdev->clock.vco_freq = + le32_to_cpu(igp_info->info_6.ulDentistVCOFreq); + } +} + bool radeon_atom_get_clock_info(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; @@ -1260,6 +1285,10 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) if (ASIC_IS_DCE8(rdev)) rdev->clock.vco_freq = le32_to_cpu(firmware_info->info_22.ulGPUPLL_OutputFreq); + else if (ASIC_IS_DCE5(rdev)) + rdev->clock.vco_freq = rdev->clock.current_dispclk; + else if (ASIC_IS_DCE41(rdev)) + radeon_atombios_get_dentist_vco_freq(rdev); else rdev->clock.vco_freq = rdev->clock.current_dispclk; @@ -1272,14 +1301,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) return false; } -union igp_info { - struct _ATOM_INTEGRATED_SYSTEM_INFO info; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_2; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 info_6; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 info_7; - struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 info_8; -}; - bool radeon_atombios_sideport_present(struct radeon_device *rdev) { struct radeon_mode_info *mode_info = &rdev->mode_info; -- cgit v1.2.3 From 16ab8a5cbea463e4d14bf0ce698f11fa64b70ae1 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 27 Jan 2016 11:22:25 -0700 Subject: vfio/noiommu: Don't use iommu_present() to track fake groups Using iommu_present() to determine whether an IOMMU group is real or fake has some problems. First, apparently Power systems don't register an IOMMU on the device bus, so the groups and containers get marked as noiommu and then won't bind to their actual IOMMU driver. Second, I expect we'll run into the same issue as we try to support vGPUs through vfio, since they're likely to emulate this behavior of creating an IOMMU group on a virtual device and then providing a vfio IOMMU backend tailored to the sort of isolation they provide, which won't necessarily be fully compatible with the IOMMU API. The solution here is to use the existing iommudata interface to IOMMU groups, which allows us to easily identify the fake groups we've created for noiommu purposes. The iommudata we set is purely arbitrary since we're only comparing the address, so we use the address of the noiommu switch itself. Reported-by: Alexey Kardashevskiy Reviewed-by: Alexey Kardashevskiy Tested-by: Alexey Kardashevskiy Tested-by: Anatoly Burakov Tested-by: Santosh Shukla Fixes: 03a76b60f8ba ("vfio: Include No-IOMMU mode") Signed-off-by: Alex Williamson --- drivers/vfio/vfio.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index 82f25cc1c460..ecca316386f5 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -123,8 +123,8 @@ struct iommu_group *vfio_iommu_group_get(struct device *dev) /* * With noiommu enabled, an IOMMU group will be created for a device * that doesn't already have one and doesn't have an iommu_ops on their - * bus. We use iommu_present() again in the main code to detect these - * fake groups. + * bus. We set iommudata simply to be able to identify these groups + * as special use and for reclamation later. */ if (group || !noiommu || iommu_present(dev->bus)) return group; @@ -134,6 +134,7 @@ struct iommu_group *vfio_iommu_group_get(struct device *dev) return NULL; iommu_group_set_name(group, "vfio-noiommu"); + iommu_group_set_iommudata(group, &noiommu, NULL); ret = iommu_group_add_device(group, dev); iommu_group_put(group); if (ret) @@ -158,7 +159,7 @@ EXPORT_SYMBOL_GPL(vfio_iommu_group_get); void vfio_iommu_group_put(struct iommu_group *group, struct device *dev) { #ifdef CONFIG_VFIO_NOIOMMU - if (!iommu_present(dev->bus)) + if (iommu_group_get_iommudata(group) == &noiommu) iommu_group_remove_device(dev); #endif @@ -190,16 +191,10 @@ static long vfio_noiommu_ioctl(void *iommu_data, return -ENOTTY; } -static int vfio_iommu_present(struct device *dev, void *unused) -{ - return iommu_present(dev->bus) ? 1 : 0; -} - static int vfio_noiommu_attach_group(void *iommu_data, struct iommu_group *iommu_group) { - return iommu_group_for_each_dev(iommu_group, NULL, - vfio_iommu_present) ? -EINVAL : 0; + return iommu_group_get_iommudata(iommu_group) == &noiommu ? 0 : -EINVAL; } static void vfio_noiommu_detach_group(void *iommu_data, @@ -323,8 +318,7 @@ static void vfio_group_unlock_and_free(struct vfio_group *group) /** * Group objects - create, release, get, put, search */ -static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group, - bool iommu_present) +static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group) { struct vfio_group *group, *tmp; struct device *dev; @@ -342,7 +336,9 @@ static struct vfio_group *vfio_create_group(struct iommu_group *iommu_group, atomic_set(&group->container_users, 0); atomic_set(&group->opened, 0); group->iommu_group = iommu_group; - group->noiommu = !iommu_present; +#ifdef CONFIG_VFIO_NOIOMMU + group->noiommu = (iommu_group_get_iommudata(iommu_group) == &noiommu); +#endif group->nb.notifier_call = vfio_iommu_group_notifier; @@ -767,7 +763,7 @@ int vfio_add_group_dev(struct device *dev, group = vfio_group_get_from_iommu(iommu_group); if (!group) { - group = vfio_create_group(iommu_group, iommu_present(dev->bus)); + group = vfio_create_group(iommu_group); if (IS_ERR(group)) { iommu_group_put(iommu_group); return PTR_ERR(group); -- cgit v1.2.3 From cdb300a041f5df1dfbde1367f95109b6449d1371 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Wed, 27 Jan 2016 09:10:37 +0100 Subject: PM / Domains: Fix potential deadlock while adding/removing subdomains We must preserve the same order of how we acquire and release the lock for genpd, as otherwise we may encounter deadlocks. The power on phase of a genpd starts by acquiring its lock. Then it walks the hierarchy of its parent domains to be able to power on these first, as per design of genpd. From a locking perspective this means the locks of the parents becomes acquired after the lock of the subdomain. Let's fix pm_genpd_add|remove_subdomain() to maintain the same order of acquiring/releasing the genpd lock as being applied in the power on/off sequence. Signed-off-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index e02ddf65bc43..2ff818c2ae6b 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -1340,8 +1340,8 @@ int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, if (!link) return -ENOMEM; - mutex_lock(&genpd->lock); - mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); + mutex_lock(&subdomain->lock); + mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING); if (genpd->status == GPD_STATE_POWER_OFF && subdomain->status != GPD_STATE_POWER_OFF) { @@ -1364,8 +1364,8 @@ int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, genpd_sd_counter_inc(genpd); out: - mutex_unlock(&subdomain->lock); mutex_unlock(&genpd->lock); + mutex_unlock(&subdomain->lock); if (ret) kfree(link); return ret; @@ -1386,7 +1386,8 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(subdomain)) return -EINVAL; - mutex_lock(&genpd->lock); + mutex_lock(&subdomain->lock); + mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING); if (!list_empty(&subdomain->slave_links) || subdomain->device_count) { pr_warn("%s: unable to remove subdomain %s\n", genpd->name, @@ -1399,22 +1400,19 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, if (link->slave != subdomain) continue; - mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING); - list_del(&link->master_node); list_del(&link->slave_node); kfree(link); if (subdomain->status != GPD_STATE_POWER_OFF) genpd_sd_counter_dec(genpd); - mutex_unlock(&subdomain->lock); - ret = 0; break; } out: mutex_unlock(&genpd->lock); + mutex_unlock(&subdomain->lock); return ret; } -- cgit v1.2.3 From a3d09c73492e57a1189e410f67e4d2115b23a3a8 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Wed, 27 Jan 2016 08:29:27 +0100 Subject: PM / Domains: Fix typo in comment Acked-by: Kevin Hilman Signed-off-by: Moritz Fischer Signed-off-by: Rafael J. Wysocki --- drivers/base/power/domain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 2ff818c2ae6b..014024a2fee9 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -160,7 +160,7 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool timed) /** * genpd_queue_power_off_work - Queue up the execution of genpd_poweroff(). - * @genpd: PM domait to power off. + * @genpd: PM domain to power off. * * Queue up the execution of genpd_poweroff() unless it's already been done * before. -- cgit v1.2.3 From 75274b33e779ae40a750bcb4bd0b07c4dfef4746 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Wed, 27 Jan 2016 20:26:54 +0100 Subject: cpuidle: coupled: remove unused define cpuidle_coupled_lock This was found with the -RT patch enabled, but the fix should apply to non-RT also. Used multi_v7_defconfig+PREEMPT_RT_FULL=y and this caused a compilation warning without this fix: ../drivers/cpuidle/coupled.c:122:21: warning: 'cpuidle_coupled_lock' defined but not used [-Wunused-variable] Signed-off-by: Anders Roxell Signed-off-by: Rafael J. Wysocki --- drivers/cpuidle/coupled.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpuidle/coupled.c b/drivers/cpuidle/coupled.c index 344058f8501a..d5657d50ac40 100644 --- a/drivers/cpuidle/coupled.c +++ b/drivers/cpuidle/coupled.c @@ -119,7 +119,6 @@ struct cpuidle_coupled { #define CPUIDLE_COUPLED_NOT_IDLE (-1) -static DEFINE_MUTEX(cpuidle_coupled_lock); static DEFINE_PER_CPU(struct call_single_data, cpuidle_coupled_poke_cb); /* -- cgit v1.2.3 From e4b133cc4b30b48d488e4e4fffb132f173ce4358 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 25 Jan 2016 22:33:46 +0530 Subject: cpufreq: Fix NULL reference crash while accessing policy->governor_data There is a race discovered by Juri, where we are able to: - create and read a sysfs file before policy->governor_data is being set to a non NULL value. OR - set policy->governor_data to NULL, and reading a file before being destroyed. And so such a crash is reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000c pgd = edfc8000 [0000000c] *pgd=bfc8c835 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 4 PID: 1730 Comm: cat Not tainted 4.5.0-rc1+ #463 Hardware name: ARM-Versatile Express task: ee8e8480 ti: ee930000 task.ti: ee930000 PC is at show_ignore_nice_load_gov_pol+0x24/0x34 LR is at show+0x4c/0x60 pc : [] lr : [] psr: a0070013 sp : ee931dd0 ip : ee931de0 fp : ee931ddc r10: ee4bc290 r9 : 00001000 r8 : ef2cb000 r7 : ee4bc200 r6 : ef2cb000 r5 : c0af57b0 r4 : ee4bc2e0 r3 : 00000000 r2 : 00000000 r1 : c0928df4 r0 : ef2cb000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: adfc806a DAC: 00000051 Process cat (pid: 1730, stack limit = 0xee930210) Stack: (0xee931dd0 to 0xee932000) 1dc0: ee931dfc ee931de0 c058ae88 c058f1a4 1de0: edce3bc0 c07bfca4 edce3ac0 00001000 ee931e24 ee931e00 c01fcb90 c058ae48 1e00: 00000001 edce3bc0 00000000 00000001 ee931e50 ee8ff480 ee931e34 ee931e28 1e20: c01fb33c c01fcb0c ee931e8c ee931e38 c01a5210 c01fb314 ee931e9c ee931e48 1e40: 00000000 edce3bf0 befe4a00 ee931f78 00000000 00000000 000001e4 00000000 1e60: c00545a8 edce3ac0 00001000 00001000 befe4a00 ee931f78 00000000 00001000 1e80: ee931ed4 ee931e90 c01fbed8 c01a5038 ed085a58 00020000 00000000 00000000 1ea0: c0ad72e4 ee931f78 ee8ff488 ee8ff480 c077f3fc 00001000 befe4a00 ee931f78 1ec0: 00000000 00001000 ee931f44 ee931ed8 c017c328 c01fbdc4 00001000 00000000 1ee0: ee8ff480 00001000 ee931f44 ee931ef8 c017c65c c03deb10 ee931fac ee931f08 1f00: c0009270 c001f290 c0a8d968 ef2cb000 ef2cb000 ee8ff480 00000020 ee8ff480 1f20: ee8ff480 befe4a00 00001000 ee931f78 00000000 00000000 ee931f74 ee931f48 1f40: c017d1ec c017c2f8 c019c724 c019c684 ee8ff480 ee8ff480 00001000 befe4a00 1f60: 00000000 00000000 ee931fa4 ee931f78 c017d2a8 c017d160 00000000 00000000 1f80: 000a9f20 00001000 befe4a00 00000003 c000ffe4 ee930000 00000000 ee931fa8 1fa0: c000fe40 c017d264 000a9f20 00001000 00000003 befe4a00 00001000 00000000 Unable to handle kernel NULL pointer dereference at virtual address 0000000c 1fc0: 000a9f20 00001000 befe4a00 00000003 00000000 00000000 00000003 00000001 pgd = edfc4000 [0000000c] *pgd=bfcac835 1fe0: 00000000 befe49dc 000197f8 b6e35dfc 60070010 00000003 3065b49d 134ac2c9 [] (show_ignore_nice_load_gov_pol) from [] (show+0x4c/0x60) [] (show) from [] (sysfs_kf_seq_show+0x90/0xfc) [] (sysfs_kf_seq_show) from [] (kernfs_seq_show+0x34/0x38) [] (kernfs_seq_show) from [] (seq_read+0x1e4/0x4e4) [] (seq_read) from [] (kernfs_fop_read+0x120/0x1a0) [] (kernfs_fop_read) from [] (__vfs_read+0x3c/0xe0) [] (__vfs_read) from [] (vfs_read+0x98/0x104) [] (vfs_read) from [] (SyS_read+0x50/0x90) [] (SyS_read) from [] (ret_fast_syscall+0x0/0x1c) Code: e5903044 e1a00001 e3081df4 e34c1092 (e593300c) ---[ end trace 5994b9a5111f35ee ]--- Fix that by making sure, policy->governor_data is updated at the right places only. Cc: 4.2+ # 4.2+ Reported-and-tested-by: Juri Lelli Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_governor.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index bab3a514ec12..e0d111024d48 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -387,16 +387,18 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy, if (!have_governor_per_policy()) cdata->gdbs_data = dbs_data; + policy->governor_data = dbs_data; + ret = sysfs_create_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); if (ret) goto reset_gdbs_data; - policy->governor_data = dbs_data; - return 0; reset_gdbs_data: + policy->governor_data = NULL; + if (!have_governor_per_policy()) cdata->gdbs_data = NULL; cdata->exit(dbs_data, !policy->governor->initialized); @@ -417,16 +419,19 @@ static int cpufreq_governor_exit(struct cpufreq_policy *policy, if (!cdbs->shared || cdbs->shared->policy) return -EBUSY; - policy->governor_data = NULL; if (!--dbs_data->usage_count) { sysfs_remove_group(get_governor_parent_kobj(policy), get_sysfs_attr(dbs_data)); + policy->governor_data = NULL; + if (!have_governor_per_policy()) cdata->gdbs_data = NULL; cdata->exit(dbs_data, policy->governor->initialized == 1); kfree(dbs_data); + } else { + policy->governor_data = NULL; } free_common_dbs_info(policy, cdata); -- cgit v1.2.3 From 2dadfd7564ef28391609c7ef896fd85218799012 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Wed, 27 Jan 2016 12:02:26 +0530 Subject: cpufreq: Use list_is_last() to check last entry of the policy list Currently next_policy() explicitly checks if a policy is the last policy in the cpufreq_policy_list. Use the standard list_is_last primitive instead. Signed-off-by: Gautham R. Shenoy Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index c35e7da1ed7a..e979ec78b695 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -48,11 +48,11 @@ static struct cpufreq_policy *next_policy(struct cpufreq_policy *policy, bool active) { do { - policy = list_next_entry(policy, policy_list); - /* No more policies in the list */ - if (&policy->policy_list == &cpufreq_policy_list) + if (list_is_last(&policy->policy_list, &cpufreq_policy_list)) return NULL; + + policy = list_next_entry(policy, policy_list); } while (!suitable_policy(policy, active)); return policy; -- cgit v1.2.3 From fb2a24a1c6457d21df9fae0dd66b20c63ba56077 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 25 Jan 2016 16:44:38 +0100 Subject: cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype There are two definitions of pxa_cpufreq_change_voltage, with slightly different prototypes after one of them had its argument marked 'const'. Now the other one (for !CONFIG_REGULATOR) produces a harmless warning: drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target': drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argument 1 of 'pxa_cpufreq_change_voltage' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); ^ drivers/cpufreq/pxa2xx-cpufreq.c:205:12: note: expected 'struct pxa_freqs *' but argument is of type 'const struct pxa_freqs *' static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) ^ This changes the prototype in the same way as the other, which avoids the warning. Fixes: 03c229906311 (cpufreq: pxa: make pxa_freqs arrays const) Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Cc: 4.2+ # 4.2+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/pxa2xx-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c index 1d99c97defa9..096377232747 100644 --- a/drivers/cpufreq/pxa2xx-cpufreq.c +++ b/drivers/cpufreq/pxa2xx-cpufreq.c @@ -202,7 +202,7 @@ static void __init pxa_cpufreq_init_voltages(void) } } #else -static int pxa_cpufreq_change_voltage(struct pxa_freqs *pxa_freq) +static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq) { return 0; } -- cgit v1.2.3 From b331bc20d9281213f7fb67912638e0fb5baeb324 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 25 Jan 2016 16:45:48 +0100 Subject: cpufreq: cpufreq-dt: avoid uninitialized variable warnings: gcc warns quite a bit about values returned from allocate_resources() in cpufreq-dt.c: cpufreq-dt.c: In function 'cpufreq_init': cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here cpufreq-dt.c: In function 'dt_cpufreq_probe': cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized] cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here The problem is that it's slightly hard for gcc to follow return codes across PTR_ERR() calls. This patch uses explicit assignments to the "ret" variable to make it easier for gcc to verify that the code is actually correct, without the need to add a bogus initialization. Signed-off-by: Arnd Bergmann Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-dt.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c index 9bc37c437874..0ca74d070058 100644 --- a/drivers/cpufreq/cpufreq-dt.c +++ b/drivers/cpufreq/cpufreq-dt.c @@ -142,15 +142,16 @@ static int allocate_resources(int cpu, struct device **cdev, try_again: cpu_reg = regulator_get_optional(cpu_dev, reg); - if (IS_ERR(cpu_reg)) { + ret = PTR_ERR_OR_ZERO(cpu_reg); + if (ret) { /* * If cpu's regulator supply node is present, but regulator is * not yet registered, we should try defering probe. */ - if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) { + if (ret == -EPROBE_DEFER) { dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n", cpu); - return -EPROBE_DEFER; + return ret; } /* Try with "cpu-supply" */ @@ -159,18 +160,16 @@ try_again: goto try_again; } - dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n", - cpu, PTR_ERR(cpu_reg)); + dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret); } cpu_clk = clk_get(cpu_dev, NULL); - if (IS_ERR(cpu_clk)) { + ret = PTR_ERR_OR_ZERO(cpu_clk); + if (ret) { /* put regulator */ if (!IS_ERR(cpu_reg)) regulator_put(cpu_reg); - ret = PTR_ERR(cpu_clk); - /* * If cpu's clk node is present, but clock is not yet * registered, we should try defering probe. -- cgit v1.2.3 From 60dee3ca27b3613e6519df52d02eadf71f853859 Mon Sep 17 00:00:00 2001 From: Gioh Kim Date: Wed, 27 Jan 2016 12:02:09 +0100 Subject: hwmon: (fam15h_power) Add bit masking for tdp_limit Add bit masking to read ApmTdpLimit precisely Signed-off-by: Gioh Kim Acked-by: Borislav Petkov Acked-by: Huang Rui Signed-off-by: Guenter Roeck --- drivers/hwmon/fam15h_power.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index f77eb971ce95..4f695d8fcafa 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -90,7 +90,15 @@ static ssize_t show_power(struct device *dev, pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5), REG_TDP_LIMIT3, &val); - tdp_limit = val >> 16; + /* + * On Carrizo and later platforms, ApmTdpLimit bit field + * is extended to 16:31 from 16:28. + */ + if (boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60) + tdp_limit = val >> 16; + else + tdp_limit = (val >> 16) & 0x1fff; + curr_pwr_watts = ((u64)(tdp_limit + data->base_tdp)) << running_avg_range; curr_pwr_watts -= running_avg_capture; -- cgit v1.2.3 From 28b8d66e0c1cc6c02b8159ae44aec359e12feefa Mon Sep 17 00:00:00 2001 From: Nicolai Hähnle Date: Wed, 27 Jan 2016 11:04:19 -0500 Subject: drm/amdgpu: only move pt bos in LRU list on success MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a race condition in the error case: since the pt bos have not necessarily been reserved in case of an error, we could move a pt bo that is currently in the middle of being evicted/moved by another process, which then resulted in a BUG_ON in ttm_bo_add_to_lru. Reviewed-by: Christian König Signed-off-by: Nicolai Hähnle Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 6f89f8e034d0..b882e8175615 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -478,9 +478,9 @@ static void amdgpu_cs_parser_fini(struct amdgpu_cs_parser *parser, int error, bo struct amdgpu_fpriv *fpriv = parser->filp->driver_priv; unsigned i; - amdgpu_vm_move_pt_bos_in_lru(parser->adev, &fpriv->vm); - if (!error) { + amdgpu_vm_move_pt_bos_in_lru(parser->adev, &fpriv->vm); + /* Sort the buffer list from the smallest to largest buffer, * which affects the order of buffers in the LRU list. * This assures that the smallest buffers are added first -- cgit v1.2.3 From 96c5d076f0a5e2023ecdb44d8261f87641ee71e0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 15 Oct 2014 15:00:47 -0400 Subject: drm/vmwgfx: respect 'nomodeset' Signed-off-by: Rob Clark Reviewed-by: Thomas Hellstrom . Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index c49812b80dd0..24fb348a44e1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -25,6 +25,7 @@ * **************************************************************************/ #include +#include #include #include "vmwgfx_drv.h" @@ -1538,6 +1539,12 @@ static int vmw_probe(struct pci_dev *pdev, const struct pci_device_id *ent) static int __init vmwgfx_init(void) { int ret; + +#ifdef CONFIG_VGA_CONSOLE + if (vgacon_text_force()) + return -EINVAL; +#endif + ret = drm_pci_init(&driver, &vmw_pci_driver); if (ret) DRM_ERROR("Failed initializing DRM.\n"); -- cgit v1.2.3 From b64a1cbef6df47c986ad622b5b2e4d3d1940070c Mon Sep 17 00:00:00 2001 From: Sudip Mukherjee Date: Sat, 23 Jan 2016 14:49:20 +0530 Subject: Revert "Staging: panel: usleep_range is preferred over udelay" This reverts commit ebd43516d3879f882a403836bba8bc5791f26a28. We should not be sleeping inside spin_lock. Fixes: ebd43516d387 ("Staging: panel: usleep_range is preferred over udelay") Cc: Sirnam Swetha Signed-off-by: Sudip Mukherjee Reported-by: Huang, Ying Tested-by: Huang, Ying Cc: stable # 4.4 Signed-off-by: Greg Kroah-Hartman --- drivers/staging/panel/panel.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 79ac19246548..70b8f4fabfad 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -825,8 +825,7 @@ static void lcd_write_cmd_s(int cmd) lcd_send_serial(0x1F); /* R/W=W, RS=0 */ lcd_send_serial(cmd & 0x0F); lcd_send_serial((cmd >> 4) & 0x0F); - /* the shortest command takes at least 40 us */ - usleep_range(40, 100); + udelay(40); /* the shortest command takes at least 40 us */ spin_unlock_irq(&pprt_lock); } @@ -837,8 +836,7 @@ static void lcd_write_data_s(int data) lcd_send_serial(0x5F); /* R/W=W, RS=1 */ lcd_send_serial(data & 0x0F); lcd_send_serial((data >> 4) & 0x0F); - /* the shortest data takes at least 40 us */ - usleep_range(40, 100); + udelay(40); /* the shortest data takes at least 40 us */ spin_unlock_irq(&pprt_lock); } @@ -848,20 +846,19 @@ static void lcd_write_cmd_p8(int cmd) spin_lock_irq(&pprt_lock); /* present the data to the data port */ w_dtr(pprt, cmd); - /* maintain the data during 20 us before the strobe */ - usleep_range(20, 100); + udelay(20); /* maintain the data during 20 us before the strobe */ bits.e = BIT_SET; bits.rs = BIT_CLR; bits.rw = BIT_CLR; set_ctrl_bits(); - usleep_range(40, 100); /* maintain the strobe during 40 us */ + udelay(40); /* maintain the strobe during 40 us */ bits.e = BIT_CLR; set_ctrl_bits(); - usleep_range(120, 500); /* the shortest command takes at least 120 us */ + udelay(120); /* the shortest command takes at least 120 us */ spin_unlock_irq(&pprt_lock); } @@ -871,20 +868,19 @@ static void lcd_write_data_p8(int data) spin_lock_irq(&pprt_lock); /* present the data to the data port */ w_dtr(pprt, data); - /* maintain the data during 20 us before the strobe */ - usleep_range(20, 100); + udelay(20); /* maintain the data during 20 us before the strobe */ bits.e = BIT_SET; bits.rs = BIT_SET; bits.rw = BIT_CLR; set_ctrl_bits(); - usleep_range(40, 100); /* maintain the strobe during 40 us */ + udelay(40); /* maintain the strobe during 40 us */ bits.e = BIT_CLR; set_ctrl_bits(); - usleep_range(45, 100); /* the shortest data takes at least 45 us */ + udelay(45); /* the shortest data takes at least 45 us */ spin_unlock_irq(&pprt_lock); } @@ -894,7 +890,7 @@ static void lcd_write_cmd_tilcd(int cmd) spin_lock_irq(&pprt_lock); /* present the data to the control port */ w_ctr(pprt, cmd); - usleep_range(60, 120); + udelay(60); spin_unlock_irq(&pprt_lock); } @@ -904,7 +900,7 @@ static void lcd_write_data_tilcd(int data) spin_lock_irq(&pprt_lock); /* present the data to the data port */ w_dtr(pprt, data); - usleep_range(60, 120); + udelay(60); spin_unlock_irq(&pprt_lock); } @@ -947,7 +943,7 @@ static void lcd_clear_fast_s(void) lcd_send_serial(0x5F); /* R/W=W, RS=1 */ lcd_send_serial(' ' & 0x0F); lcd_send_serial((' ' >> 4) & 0x0F); - usleep_range(40, 100); /* the shortest data takes at least 40 us */ + udelay(40); /* the shortest data takes at least 40 us */ } spin_unlock_irq(&pprt_lock); @@ -971,7 +967,7 @@ static void lcd_clear_fast_p8(void) w_dtr(pprt, ' '); /* maintain the data during 20 us before the strobe */ - usleep_range(20, 100); + udelay(20); bits.e = BIT_SET; bits.rs = BIT_SET; @@ -979,13 +975,13 @@ static void lcd_clear_fast_p8(void) set_ctrl_bits(); /* maintain the strobe during 40 us */ - usleep_range(40, 100); + udelay(40); bits.e = BIT_CLR; set_ctrl_bits(); /* the shortest data takes at least 45 us */ - usleep_range(45, 100); + udelay(45); } spin_unlock_irq(&pprt_lock); @@ -1007,7 +1003,7 @@ static void lcd_clear_fast_tilcd(void) for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { /* present the data to the data port */ w_dtr(pprt, ' '); - usleep_range(60, 120); + udelay(60); } spin_unlock_irq(&pprt_lock); -- cgit v1.2.3 From 327b882d3bcc1fba82dbd39b5cf5a838c81218e2 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 15 Jan 2016 00:47:41 +0100 Subject: Staging: speakup: Fix getting port information Commit f79b0d9c223c ("staging: speakup: Fixed warning instead of ") broke the port information in the speakup driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included, and no other header includes asm/serial.h. We here make sure serialio.c does get the arch-specific definition of SERIAL_PORT_DFNS from asm/serial.h, if any. Along the way, this makes sure that we do have information for the requested serial port number (index) Fixes: f79b0d9c223c ("staging: speakup: Fixed warning instead of ") Signed-off-by: Samuel Thibault Cc: stable # 3.18 Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/serialio.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/staging/speakup/serialio.c b/drivers/staging/speakup/serialio.c index 3b5835b28128..a5bbb338f275 100644 --- a/drivers/staging/speakup/serialio.c +++ b/drivers/staging/speakup/serialio.c @@ -6,6 +6,11 @@ #include "spk_priv.h" #include "serialio.h" +#include +/* WARNING: Do not change this to without testing that + * SERIAL_PORT_DFNS does get defined to the appropriate value. */ +#include + #ifndef SERIAL_PORT_DFNS #define SERIAL_PORT_DFNS #endif @@ -23,9 +28,15 @@ const struct old_serial_port *spk_serial_init(int index) int baud = 9600, quot = 0; unsigned int cval = 0; int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8; - const struct old_serial_port *ser = rs_table + index; + const struct old_serial_port *ser; int err; + if (index >= ARRAY_SIZE(rs_table)) { + pr_info("no port info for ttyS%d\n", index); + return NULL; + } + ser = rs_table + index; + /* Divisor, bytesize and parity */ quot = ser->baud_base / baud; cval = cflag & (CSIZE | CSTOPB); -- cgit v1.2.3 From 88867e3d0b7eea256c1cd432b0a3c7a21e8edf07 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Mon, 25 Jan 2016 01:32:08 +0100 Subject: Staging: speakup: fix read scrolled-back VT Previously, speakup would always read the non-scrolled part of the VT, even when the VT is scrolled back with shift-page. This patch makes vt.c export screen_pos so that speakup can use it to properly access the content of the scrolled-back VT. This was tested with both vgacon and fbcon. Signed-off-by: Samuel Thibault Reviewed-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/main.c | 21 +++++++++++++-------- drivers/tty/vt/vt.c | 1 + 2 files changed, 14 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c index 63c59bc89b04..30cf973f326d 100644 --- a/drivers/staging/speakup/main.c +++ b/drivers/staging/speakup/main.c @@ -264,8 +264,9 @@ static struct notifier_block vt_notifier_block = { .notifier_call = vt_notifier_call, }; -static unsigned char get_attributes(u16 *pos) +static unsigned char get_attributes(struct vc_data *vc, u16 *pos) { + pos = screen_pos(vc, pos - (u16 *)vc->vc_origin, 1); return (u_char) (scr_readw(pos) >> 8); } @@ -275,7 +276,7 @@ static void speakup_date(struct vc_data *vc) spk_y = spk_cy = vc->vc_y; spk_pos = spk_cp = vc->vc_pos; spk_old_attr = spk_attr; - spk_attr = get_attributes((u_short *) spk_pos); + spk_attr = get_attributes(vc, (u_short *)spk_pos); } static void bleep(u_short val) @@ -469,8 +470,12 @@ static u16 get_char(struct vc_data *vc, u16 *pos, u_char *attribs) u16 ch = ' '; if (vc && pos) { - u16 w = scr_readw(pos); - u16 c = w & 0xff; + u16 w; + u16 c; + + pos = screen_pos(vc, pos - (u16 *)vc->vc_origin, 1); + w = scr_readw(pos); + c = w & 0xff; if (w & vc->vc_hi_font_mask) c |= 0x100; @@ -746,7 +751,7 @@ static int get_line(struct vc_data *vc) u_char tmp2; spk_old_attr = spk_attr; - spk_attr = get_attributes((u_short *) spk_pos); + spk_attr = get_attributes(vc, (u_short *)spk_pos); for (i = 0; i < vc->vc_cols; i++) { buf[i] = (u_char) get_char(vc, (u_short *) tmp, &tmp2); tmp += 2; @@ -811,7 +816,7 @@ static int say_from_to(struct vc_data *vc, u_long from, u_long to, u_short saved_punc_mask = spk_punc_mask; spk_old_attr = spk_attr; - spk_attr = get_attributes((u_short *) from); + spk_attr = get_attributes(vc, (u_short *)from); while (from < to) { buf[i++] = (char)get_char(vc, (u_short *) from, &tmp); from += 2; @@ -886,7 +891,7 @@ static int get_sentence_buf(struct vc_data *vc, int read_punc) sentmarks[bn][0] = &sentbuf[bn][0]; i = 0; spk_old_attr = spk_attr; - spk_attr = get_attributes((u_short *) start); + spk_attr = get_attributes(vc, (u_short *)start); while (start < end) { sentbuf[bn][i] = (char)get_char(vc, (u_short *) start, &tmp); @@ -1585,7 +1590,7 @@ static int count_highlight_color(struct vc_data *vc) u16 *ptr; for (ptr = start; ptr < end; ptr++) { - ch = get_attributes(ptr); + ch = get_attributes(vc, ptr); bg = (ch & 0x70) >> 4; speakup_console[vc_num]->ht.bgcount[bg]++; } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4462d167900c..12210dab9ab1 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -4250,6 +4250,7 @@ unsigned short *screen_pos(struct vc_data *vc, int w_offset, int viewed) { return screenpos(vc, 2 * w_offset, viewed); } +EXPORT_SYMBOL_GPL(screen_pos); void getconsxy(struct vc_data *vc, unsigned char *p) { -- cgit v1.2.3 From 52795f6fdeb8a2b98373108ac2838c674bb2cbc4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 27 Jan 2016 14:40:33 +0100 Subject: i2c: piix4: don't regress on bus names The I2C bus names are supposed to be stable as they can be used by userspace to uniquely identify a specific I2C bus. So restore the original names for all legacy (pre-SB800) devices. For SB800 devices and later, improve the names. "SDA" refers to the serial data pin of each SMBus port, it's an implementation detail the user doesn't need to know. Use "port" instead, which is easier to understand. Signed-off-by: Jean Delvare Reviewed-by: Mika Westerberg Tested-by: Christian Fetzer Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-piix4.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index f79a84ef1aa4..93f2895383ee 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -139,9 +139,9 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { /* SB800 globals */ static DEFINE_MUTEX(piix4_mutex_sb800); static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { - "SDA0", "SDA2", "SDA3", "SDA4" + " port 0", " port 2", " port 3", " port 4" }; -static const char *piix4_aux_port_name_sb800 = "SDA1"; +static const char *piix4_aux_port_name_sb800 = " port 1"; struct i2c_piix4_adapdata { unsigned short smba; @@ -660,7 +660,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, adap->dev.parent = &dev->dev; snprintf(adap->name, sizeof(adap->name), - "SMBus PIIX4 adapter %s at %04x", name, smba); + "SMBus PIIX4 adapter%s at %04x", name, smba); i2c_set_adapdata(adap, adapdata); @@ -712,11 +712,14 @@ error: static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { int retval; + bool is_sb800 = false; if ((dev->vendor == PCI_VENDOR_ID_ATI && dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && dev->revision >= 0x40) || dev->vendor == PCI_VENDOR_ID_AMD) { + is_sb800 = true; + if (!request_region(SB800_PIIX4_SMB_IDX, 2, "smba_idx")) { dev_err(&dev->dev, "SMBus base address index region 0x%x already in use!\n", @@ -746,7 +749,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) return retval; /* Try to register main SMBus adapter, give up if we can't */ - retval = piix4_add_adapter(dev, retval, false, 0, "main", + retval = piix4_add_adapter(dev, retval, false, 0, "", &piix4_main_adapters[0]); if (retval < 0) return retval; @@ -774,7 +777,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ piix4_add_adapter(dev, retval, false, 0, - piix4_aux_port_name_sb800, + is_sb800 ? piix4_aux_port_name_sb800 : "", &piix4_aux_adapter); } -- cgit v1.2.3 From 8f6aff9858c45525345b92b2a88c2af776c64340 Mon Sep 17 00:00:00 2001 From: Lada Trimasova Date: Wed, 27 Jan 2016 11:10:32 +0000 Subject: iommu/io-pgtable-arm: Fix io-pgtable-arm build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Trying to build a kernel for ARC with both options CONFIG_COMPILE_TEST and CONFIG_IOMMU_IO_PGTABLE_LPAE enabled (e.g. as a result of "make allyesconfig") results in the following build failure: | CC drivers/iommu/io-pgtable-arm.o | linux/drivers/iommu/io-pgtable-arm.c: In | function ‘__arm_lpae_alloc_pages’: | linux/drivers/iommu/io-pgtable-arm.c:221:3: | error: implicit declaration of function ‘dma_map_single’ | [-Werror=implicit-function-declaration] | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ | linux/drivers/iommu/io-pgtable-arm.c:221:42: | error: ‘DMA_TO_DEVICE’ undeclared (first use in this function) | dma = dma_map_single(dev, pages, size, DMA_TO_DEVICE); | ^ Since IOMMU_IO_PGTABLE_LPAE depends on DMA API, io-pgtable-arm.c should include linux/dma-mapping.h. This fixes the reported failure. Cc: Alexey Brodkin Cc: Vineet Gupta Cc: Joerg Roedel Signed-off-by: Lada Trimasova Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/io-pgtable-arm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c index 8bbcbfe7695c..381ca5a37a7b 100644 --- a/drivers/iommu/io-pgtable-arm.c +++ b/drivers/iommu/io-pgtable-arm.c @@ -25,6 +25,7 @@ #include #include #include +#include #include -- cgit v1.2.3 From c5b635203032462603c503ecce91a7021c1ad44a Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 29 Jan 2016 10:57:53 +0100 Subject: irqchip/mxs: Add missing set_handle_irq() The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by: Oleksij Rempel Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner --- drivers/irqchip/irq-mxs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c index c22e2d40cb30..efe50845939d 100644 --- a/drivers/irqchip/irq-mxs.c +++ b/drivers/irqchip/irq-mxs.c @@ -241,6 +241,7 @@ static int __init asm9260_of_init(struct device_node *np, writel(0, icoll_priv.intr + i); icoll_add_domain(np, ASM9260_NUM_IRQS); + set_handle_irq(icoll_handle_irq); return 0; } -- cgit v1.2.3 From da972fb13bc5a1baad450c11f9182e4cd0a091f6 Mon Sep 17 00:00:00 2001 From: Jeremy McNicoll Date: Thu, 14 Jan 2016 21:33:06 -0800 Subject: iommu/vt-d: Don't skip PCI devices when disabling IOTLB Fix a simple typo when disabling IOTLB on PCI(e) devices. Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Jeremy McNicoll Reviewed-by: Alex Williamson Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index ac7387686ddc..986a53e3eb96 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1489,7 +1489,7 @@ static void iommu_disable_dev_iotlb(struct device_domain_info *info) { struct pci_dev *pdev; - if (dev_is_pci(info->dev)) + if (!dev_is_pci(info->dev)) return; pdev = to_pci_dev(info->dev); -- cgit v1.2.3 From 9b1a12d29109234d2b9718d04d4d404b7da4e794 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Wed, 20 Jan 2016 22:01:19 +0800 Subject: iommu/amd: Correct the wrong setting of alias DTE in do_attach In below commit alias DTE is set when its peripheral is setting DTE. However there's a code bug here to wrongly set the alias DTE, correct it in this patch. commit e25bfb56ea7f046b71414e02f80f620deb5c6362 Author: Joerg Roedel Date: Tue Oct 20 17:33:38 2015 +0200 iommu/amd: Set alias DTE in do_attach/do_detach Signed-off-by: Baoquan He Tested-by: Mark Hounschell Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 539b0dea8034..e5e223938eec 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2049,7 +2049,7 @@ static void do_attach(struct iommu_dev_data *dev_data, /* Update device table */ set_dte_entry(dev_data->devid, domain, ats); if (alias != dev_data->devid) - set_dte_entry(dev_data->devid, domain, ats); + set_dte_entry(alias, domain, ats); device_flush_dte(dev_data); } -- cgit v1.2.3 From 6c55d9b98335f7f6bd5f061866ff1633401f3a44 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Fri, 29 Jan 2016 16:49:47 +0200 Subject: serial: 8250_pci: Add Intel Broadwell ports Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as used on Intel Baytrail so we can reuse the existing Baytrail setup code. Add both Broadwell LPSS UART ports to the list of supported devices. Signed-off-by: Leif Liddy Signed-off-by: Mika Westerberg Reviewed-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 4097f3f65b3b..e71ec78fc11e 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1379,6 +1379,9 @@ ce4100_serial_setup(struct serial_private *priv, #define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a #define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c +#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3 +#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4 + #define BYT_PRV_CLK 0x800 #define BYT_PRV_CLK_EN (1 << 0) #define BYT_PRV_CLK_M_VAL_SHIFT 1 @@ -1461,11 +1464,13 @@ byt_serial_setup(struct serial_private *priv, switch (pdev->device) { case PCI_DEVICE_ID_INTEL_BYT_UART1: case PCI_DEVICE_ID_INTEL_BSW_UART1: + case PCI_DEVICE_ID_INTEL_BDW_UART1: rx_param->src_id = 3; tx_param->dst_id = 2; break; case PCI_DEVICE_ID_INTEL_BYT_UART2: case PCI_DEVICE_ID_INTEL_BSW_UART2: + case PCI_DEVICE_ID_INTEL_BDW_UART2: rx_param->src_id = 5; tx_param->dst_id = 4; break; @@ -2062,6 +2067,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = byt_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BDW_UART1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BDW_UART2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = byt_serial_setup, + }, /* * ITE */ @@ -5506,6 +5525,16 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, pbn_byt }, + /* Intel Broadwell */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000, + pbn_byt }, + /* * Intel Quark x1000 */ -- cgit v1.2.3