From 0475c947d221f9250bbdf430b2604f828b643ee0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 25 Jan 2014 19:46:23 -0200 Subject: ata: pata_imx: Check the return value from clk_prepare_enable() clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam Signed-off-by: Tejun Heo --- drivers/ata/pata_imx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c index 26386f0b89a8..b0b18ec5465f 100644 --- a/drivers/ata/pata_imx.c +++ b/drivers/ata/pata_imx.c @@ -119,7 +119,9 @@ static int pata_imx_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; host = ata_host_alloc(&pdev->dev, 1); if (!host) { @@ -212,7 +214,9 @@ static int pata_imx_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct pata_imx_priv *priv = host->private_data; - clk_prepare_enable(priv->clk); + int ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; __raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL); -- cgit v1.2.3 From 49c8f1ffe26ffddfb7244a24db21c0b4a79e1c52 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 22 Jan 2014 20:56:33 +0100 Subject: ATA: SATA_MV: Add missing Kconfig select statememnt SATA_MV depends on GENERIC_PHY. So if SATA_MV is built in, GENERIC_PHY cannot be modular. Fixes build error found by kbuild test robot. Signed-off-by: Andrew Lunn Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4e737728aee2..868429a47be4 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -247,6 +247,7 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" + select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, -- cgit v1.2.3 From efb9e0f4f43780f0ae0c6428d66bd03e805c7539 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Thu, 30 Jan 2014 15:20:30 +0400 Subject: ata: enable quirk from jmicron JMB350 for JMB394 Without the patch the kernel generates the following error. ata11.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata11.15: Port Multiplier vendor mismatch '0x197b' != '0x123' ata11.15: PMP revalidation failed (errno=-19) ata11.15: failed to recover PMP after 5 tries, giving up This patch helps to bypass this error and the device becomes functional. Signed-off-by: Denis V. Lunev Signed-off-by: Tejun Heo Cc: Cc: stable@vger.kernel.org --- drivers/ata/libata-pmp.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 20fd337a5731..7ccc084bf1df 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -447,8 +447,11 @@ static void sata_pmp_quirks(struct ata_port *ap) * otherwise. Don't try hard to recover it. */ ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY; - } else if (vendor == 0x197b && devid == 0x2352) { - /* chip found in Thermaltake BlackX Duet, jmicron JMB350? */ + } else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) { + /* + * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350? + * 0x0325: jmicron JMB394. + */ ata_for_each_link(link, ap, EDGE) { /* SRST breaks detection and disks get misclassified * LPM disabled to avoid potential problems -- cgit v1.2.3 From 9f9c47f00ce99329b1a82e2ac4f70f0fe3db549c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Feb 2014 10:42:07 -0500 Subject: sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN It's a bit odd to see a newer device showing mod15write; however, the reported behavior is highly consistent and other factors which could contribute seem to have been verified well enough. Also, both sata_sil itself and the drive are fairly outdated at this point making the risk of this change fairly low. It is possible, probably likely, that other drive models in the same family have the same problem; however, for now, let's just add the specific model which was tested. Signed-off-by: Tejun Heo Reported-by: matson References: http://lkml.kernel.org/g/201401211912.s0LJCk7F015058@rs103.luxsci.com Cc: stable@vger.kernel.org --- drivers/ata/sata_sil.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index d67fc351343c..b7695e804635 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -157,6 +157,7 @@ static const struct sil_drivelist { { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE }, { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, { } }; -- cgit v1.2.3 From 8ad116e649b21a42e3cccfb3c1b8d5ea52ba19e5 Mon Sep 17 00:00:00 2001 From: Ezequiel Garcia Date: Sun, 16 Feb 2014 12:29:53 -0300 Subject: ata: sata_mv: Cleanup only the initialized ports When an error occurs in the port initialization loop, currently the driver tries to cleanup all the ports. This results in a NULL pointer dereference if the ports were only partially initialized. Fix this by updating only the number of initialized ports (either with failure or successfully), before jumping to the error path and looping over that number in the cleanup loop. Cc: Andrew Lunn Reported-by: Mikael Pettersson Signed-off-by: Ezequiel Garcia Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_mv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 20a7517bd339..9c1a11de3044 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4104,7 +4104,6 @@ static int mv_platform_probe(struct platform_device *pdev) if (!hpriv->port_phys) return -ENOMEM; host->private_data = hpriv; - hpriv->n_ports = n_ports; hpriv->board_idx = chip_soc; host->iomap = NULL; @@ -4132,11 +4131,17 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->port_phys[port] = NULL; if ((rc != -EPROBE_DEFER) && (rc != -ENODEV)) dev_warn(&pdev->dev, "error getting phy"); + + /* Cleanup only the initialized ports */ + hpriv->n_ports = port; goto err; } else phy_power_on(hpriv->port_phys[port]); } + /* All the ports have been initialized */ + hpriv->n_ports = n_ports; + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -4174,7 +4179,7 @@ err: clk_disable_unprepare(hpriv->clk); clk_put(hpriv->clk); } - for (port = 0; port < n_ports; port++) { + for (port = 0; port < hpriv->n_ports; port++) { if (!IS_ERR(hpriv->port_clks[port])) { clk_disable_unprepare(hpriv->port_clks[port]); clk_put(hpriv->port_clks[port]); -- cgit v1.2.3 From 67809f85d31eac600f6b28defa5386c9d2a13b1d Mon Sep 17 00:00:00 2001 From: Levente Kurusa Date: Tue, 18 Feb 2014 10:22:17 -0500 Subject: ahci: disable NCQ on Samsung pci-e SSDs on macbooks Samsung's pci-e SSDs with device ID 0x1600 which are found on some macbooks time out on NCQ commands. Blacklist NCQ on the device so that the affected machines can at least boot. Original-patch-by: Levente Kurusa Signed-off-by: Tejun Heo Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60731 Cc: stable@vger.kernel.org --- drivers/ata/ahci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index dc2756fb6f33..7df81576a489 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -61,6 +61,7 @@ enum board_ids { /* board IDs by feature in alphabetical order */ board_ahci, board_ahci_ign_iferr, + board_ahci_noncq, board_ahci_nosntf, board_ahci_yes_fbs, @@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_noncq] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_nosntf] = { AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF), .flags = AHCI_FLAG_COMMON, @@ -452,6 +460,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* + * Samsung SSDs found on some macbooks. NCQ times out. + * https://bugzilla.kernel.org/show_bug.cgi?id=60731 + */ + { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq }, + /* Enmotus */ { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, -- cgit v1.2.3