From 52793d62a696e9188092eb0817fb1219ee5729ff Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 16 Oct 2020 14:06:27 -0700 Subject: nvme-fc: fix io timeout to abort I/O Currently, an I/O timeout unconditionally invokes nvme_fc_error_recovery() which checks for LIVE or CONNECTING state. If live, the routine resets the controller which initiates a reconnect - which is valid. If CONNECTING, err_work is scheduled. Err_work then calls the terminate_io routine, which also checks for CONNECTING and noops any further action on outstanding I/O. The result is nothing happened to the timed out io. As such, if the command was dropped on the wire, it will never timeout / complete, and the connect process will hang. Change the behavior of the io timeout routine to unconditionally abort the I/O. I/O completion handling will note that an io failed due to an abort and will terminate the connection / association as needed. If the abort was unable to happen, continue with a call to nvme_fc_error_recovery(). To ensure something different happens in nvme_fc_error_recovery() rework it so at it will abort all I/Os on the association to force a failure. As I/O aborts now may occur outside of delete_association, counting for completion must be wary and only count those aborted during delete_association when TERMIO is set on the controller. Signed-off-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fc.c | 108 +++++++++++++++++++++++++++++++------------------ 1 file changed, 69 insertions(+), 39 deletions(-) (limited to 'drivers') diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index e2e09e25c056..3e72b7d74df3 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -1837,8 +1837,10 @@ __nvme_fc_abort_op(struct nvme_fc_ctrl *ctrl, struct nvme_fc_fcp_op *op) opstate = atomic_xchg(&op->state, FCPOP_STATE_ABORTED); if (opstate != FCPOP_STATE_ACTIVE) atomic_set(&op->state, opstate); - else if (test_bit(FCCTRL_TERMIO, &ctrl->flags)) + else if (test_bit(FCCTRL_TERMIO, &ctrl->flags)) { + op->flags |= FCOP_FLAGS_TERMIO; ctrl->iocnt++; + } spin_unlock_irqrestore(&ctrl->lock, flags); if (opstate != FCPOP_STATE_ACTIVE) @@ -1874,7 +1876,8 @@ __nvme_fc_fcpop_chk_teardowns(struct nvme_fc_ctrl *ctrl, if (opstate == FCPOP_STATE_ABORTED) { spin_lock_irqsave(&ctrl->lock, flags); - if (test_bit(FCCTRL_TERMIO, &ctrl->flags)) { + if (test_bit(FCCTRL_TERMIO, &ctrl->flags) && + op->flags & FCOP_FLAGS_TERMIO) { if (!--ctrl->iocnt) wake_up(&ctrl->ioabort_wait); } @@ -2446,15 +2449,20 @@ nvme_fc_timeout(struct request *rq, bool reserved) { struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(rq); struct nvme_fc_ctrl *ctrl = op->ctrl; + struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu; + struct nvme_command *sqe = &cmdiu->sqe; /* - * we can't individually ABTS an io without affecting the queue, - * thus killing the queue, and thus the association. - * So resolve by performing a controller reset, which will stop - * the host/io stack, terminate the association on the link, - * and recreate an association on the link. + * Attempt to abort the offending command. Command completion + * will detect the aborted io and will fail the connection. */ - nvme_fc_error_recovery(ctrl, "io timeout error"); + dev_info(ctrl->ctrl.device, + "NVME-FC{%d.%d}: io timeout: opcode %d fctype %d w10/11: " + "x%08x/x%08x\n", + ctrl->cnum, op->queue->qnum, sqe->common.opcode, + sqe->connect.fctype, sqe->common.cdw10, sqe->common.cdw11); + if (__nvme_fc_abort_op(ctrl, op)) + nvme_fc_error_recovery(ctrl, "io timeout abort failed"); /* * the io abort has been initiated. Have the reset timer @@ -2726,6 +2734,7 @@ nvme_fc_complete_rq(struct request *rq) struct nvme_fc_ctrl *ctrl = op->ctrl; atomic_set(&op->state, FCPOP_STATE_IDLE); + op->flags &= ~FCOP_FLAGS_TERMIO; nvme_fc_unmap_data(ctrl, rq, op); nvme_complete_rq(rq); @@ -3090,26 +3099,19 @@ out_free_queue: return ret; } + /* - * This routine stops operation of the controller on the host side. - * On the host os stack side: Admin and IO queues are stopped, - * outstanding ios on them terminated via FC ABTS. - * On the link side: the association is terminated. + * This routine runs through all outstanding commands on the association + * and aborts them. This routine is typically be called by the + * delete_association routine. It is also called due to an error during + * reconnect. In that scenario, it is most likely a command that initializes + * the controller, including fabric Connect commands on io queues, that + * may have timed out or failed thus the io must be killed for the connect + * thread to see the error. */ static void -nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) +__nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues) { - struct nvmefc_ls_rcv_op *disls = NULL; - unsigned long flags; - - if (!test_and_clear_bit(ASSOC_ACTIVE, &ctrl->flags)) - return; - - spin_lock_irqsave(&ctrl->lock, flags); - set_bit(FCCTRL_TERMIO, &ctrl->flags); - ctrl->iocnt = 0; - spin_unlock_irqrestore(&ctrl->lock, flags); - /* * If io queues are present, stop them and terminate all outstanding * ios on them. As FC allocates FC exchange for each io, the @@ -3127,6 +3129,8 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) blk_mq_tagset_busy_iter(&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->tag_set); + if (start_queues) + nvme_start_queues(&ctrl->ctrl); } /* @@ -3143,13 +3147,34 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) /* * clean up the admin queue. Same thing as above. - * use blk_mq_tagset_busy_itr() and the transport routine to - * terminate the exchanges. */ blk_mq_quiesce_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); blk_mq_tagset_wait_completed_request(&ctrl->admin_tag_set); +} + +/* + * This routine stops operation of the controller on the host side. + * On the host os stack side: Admin and IO queues are stopped, + * outstanding ios on them terminated via FC ABTS. + * On the link side: the association is terminated. + */ +static void +nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) +{ + struct nvmefc_ls_rcv_op *disls = NULL; + unsigned long flags; + + if (!test_and_clear_bit(ASSOC_ACTIVE, &ctrl->flags)) + return; + + spin_lock_irqsave(&ctrl->lock, flags); + set_bit(FCCTRL_TERMIO, &ctrl->flags); + ctrl->iocnt = 0; + spin_unlock_irqrestore(&ctrl->lock, flags); + + __nvme_fc_abort_outstanding_ios(ctrl, false); /* kill the aens as they are a separate path */ nvme_fc_abort_aen_ops(ctrl); @@ -3263,22 +3288,27 @@ static void __nvme_fc_terminate_io(struct nvme_fc_ctrl *ctrl) { /* - * if state is connecting - the error occurred as part of a - * reconnect attempt. The create_association error paths will - * clean up any outstanding io. - * - * if it's a different state - ensure all pending io is - * terminated. Given this can delay while waiting for the - * aborted io to return, we recheck adapter state below - * before changing state. + * if state is CONNECTING - the error occurred as part of a + * reconnect attempt. Abort any ios on the association and + * let the create_association error paths resolve things. */ - if (ctrl->ctrl.state != NVME_CTRL_CONNECTING) { - nvme_stop_keep_alive(&ctrl->ctrl); - - /* will block will waiting for io to terminate */ - nvme_fc_delete_association(ctrl); + if (ctrl->ctrl.state == NVME_CTRL_CONNECTING) { + __nvme_fc_abort_outstanding_ios(ctrl, true); + return; } + /* + * For any other state, kill the association. As this routine + * is a common io abort routine for resetting and such, after + * the association is terminated, ensure that the state is set + * to CONNECTING. + */ + + nvme_stop_keep_alive(&ctrl->ctrl); + + /* will block will waiting for io to terminate */ + nvme_fc_delete_association(ctrl); + if (ctrl->ctrl.state != NVME_CTRL_CONNECTING && !nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) dev_err(ctrl->ctrl.device, -- cgit v1.2.3