From 557de5eb29caeab56c2f97b49eec02e32a2cbe32 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 22 Aug 2010 14:22:40 +0300 Subject: libertas: if_sdio: fix buffer alignment in struct if_sdio_card The commit 886275ce41a9751117367fb387ed171049eb6148 (param: lock if_sdio's lbs_helper_name and lbs_fw_name against sysfs changes) introduced new fields into the if_sdio_card structure. It caused missalignment of the if_sdio_card.buffer field and failure at driver load time: ~# modprobe libertas_sdio [ 62.315124] libertas_sdio: Libertas SDIO driver [ 62.319976] libertas_sdio: Copyright Pierre Ossman [ 63.020629] DMA misaligned error with device 48 [ 63.025207] mmci-omap-hs mmci-omap-hs.1: unexpected dma status 800 [ 66.005035] libertas: command 0x0003 timed out [ 66.009826] libertas: Timeout submitting command 0x0003 [ 66.016296] libertas: PREP_CMD: command 0x0003 failed: -110 Adding explicit alignment attribute for the if_sdio_card.buffer field fixes this problem. Signed-off-by: Mike Rapoport Acked-by: Marek Vasut Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 6e71346a7550..382f2371a1ab 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -126,7 +126,7 @@ struct if_sdio_card { const char *helper; const char *firmware; - u8 buffer[65536]; + u8 buffer[65536] __attribute__((aligned(4))); spinlock_t lock; struct if_sdio_packet *packets; -- cgit v1.2.3 From d8e1ba76d619dbc0be8fbeee4e6c683b5c812d3a Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 24 Aug 2010 15:27:34 -0400 Subject: ath5k: check return value of ieee80211_get_tx_rate This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by: John W. Linville Cc: stable@kernel.org Acked-by: Bob Copeland --- drivers/net/wireless/ath/ath5k/base.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 373dcfec689c..d77ce9906b6c 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1327,6 +1327,10 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf, PCI_DMA_TODEVICE); rate = ieee80211_get_tx_rate(sc->hw, info); + if (!rate) { + ret = -EINVAL; + goto err_unmap; + } if (info->flags & IEEE80211_TX_CTL_NO_ACK) flags |= AR5K_TXDESC_NOACK; -- cgit v1.2.3 From f880c2050f30b23c9b6f80028c09f76e693bf309 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 24 Aug 2010 22:54:05 +0200 Subject: p54: fix tx feedback status flag check Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Cc: Reported-by: Michael Buesch Tested-by: Michael Buesch Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 173aec3d6e7e..0e937dc0c9c4 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -446,7 +446,7 @@ static void p54_rx_frame_sent(struct p54_common *priv, struct sk_buff *skb) } if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) && - (!payload->status)) + !(payload->status & P54_TX_FAILED)) info->flags |= IEEE80211_TX_STAT_ACK; if (payload->status & P54_TX_PSM_CANCELLED) info->flags |= IEEE80211_TX_STAT_TX_FILTERED; -- cgit v1.2.3 From 803288e61e346ba367373bc7d5eeb6e11c81a33c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 30 Aug 2010 19:26:32 -0400 Subject: ath9k_hw: Fix EEPROM uncompress block reading on AR9003 The EEPROM is compressed on AR9003, upon decompression the wrong upper limit was being used for the block which prevented the 5 GHz CTL indexes from being used, which are stored towards the end of the EEPROM block. This fix allows the actual intended regulatory limits to be used on AR9003 hardware. Cc: stable@kernel.org [2.6.36+] Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index b883b174385b..057fb69ddf7f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -797,7 +797,7 @@ static bool ar9300_uncompress_block(struct ath_hw *ah, length = block[it+1]; length &= 0xff; - if (length > 0 && spot >= 0 && spot+length < mdataSize) { + if (length > 0 && spot >= 0 && spot+length <= mdataSize) { ath_print(common, ATH_DBG_EEPROM, "Restore at %d: spot=%d " "offset=%d length=%d\n", -- cgit v1.2.3 From 904879748d7439a6dabdc6be9aad983e216b027d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 30 Aug 2010 19:26:33 -0400 Subject: ath9k_hw: fix parsing of HT40 5 GHz CTLs The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Cc: stable@kernel.org [2.6.27+] Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom.h | 2 +- drivers/net/wireless/ath/regd.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index 7f48df1e2903..0b09db0f8e7d 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -62,7 +62,7 @@ #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 +#define CTL_MODE_M 0xf #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index a1c39526161a..345dd9721b41 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -31,7 +31,6 @@ enum ctl_group { #define NO_CTL 0xff #define SD_NO_CTL 0xE0 #define NO_CTL 0xff -#define CTL_MODE_M 7 #define CTL_11A 0 #define CTL_11B 1 #define CTL_11G 2 -- cgit v1.2.3 From 7acc7c683a747689aaaaad4fce1683fc3f85e552 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 8 Sep 2010 08:30:20 -0700 Subject: iwlwifi: do not perferm force reset while doing scan When uCode error condition detected, driver try to perform either rf reset or firmware reload in order bring device back to working condition. If rf reset is required and scan is in process, there is no need to issue rf reset since scan already reset the rf. If firmware reload is required and scan is in process, skip the reload request. There is a possibility firmware reload during scan cause problem. [ 485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62() [ 485.804049] Hardware name: Latitude E6400 [ 485.804052] ieee80211_restart_hw called with hardware scan in progress [ 485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore] [ 485.804069] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804072] Call Trace: [ 485.804079] [] warn_slowpath_common+0x60/0x75 [ 485.804084] [] warn_slowpath_fmt+0x26/0x2a [ 485.804089] [] ieee80211_restart_hw+0x28/0x62 [ 485.804102] [] iwl_bg_restart+0x113/0x150 [iwlagn] [ 485.804108] [] process_one_work+0x181/0x25c [ 485.804119] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804124] [] worker_thread+0xf9/0x1f2 [ 485.804128] [] ? worker_thread+0x0/0x1f2 [ 485.804133] [] kthread+0x64/0x69 [ 485.804137] [] ? kthread+0x0/0x69 [ 485.804141] [] kernel_thread_helper+0x6/0x10 [ 485.804145] ---[ end trace 3d4ebdc02d524bbb ]--- [ 485.804148] WG> 1 [ 485.804153] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804156] Call Trace: [ 485.804161] [] ? ieee80211_restart_hw+0x5c/0x62 [ 485.804172] [] iwl_bg_restart+0x118/0x150 [iwlagn] [ 485.804177] [] process_one_work+0x181/0x25c [ 485.804188] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804192] [] worker_thread+0xf9/0x1f2 [ 485.804197] [] ? worker_thread+0x0/0x1f2 [ 485.804201] [] kthread+0x64/0x69 [ 485.804205] [] ? kthread+0x0/0x69 [ 485.804209] [] kernel_thread_helper+0x6/0x10 Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 07dbc2796448..e23c4060a0f0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2613,6 +2613,11 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return -EINVAL; + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_INFO(priv, "scan in progress.\n"); + return -EINVAL; + } + if (mode >= IWL_MAX_FORCE_RESET) { IWL_DEBUG_INFO(priv, "invalid reset request.\n"); return -EINVAL; -- cgit v1.2.3