From 052ac01aeb84d8427ba8ac3d70991ac01b009b59 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 27 Oct 2006 10:33:11 -0400 Subject: USB: OHCI: disable RHSC inside interrupt handler This patch (as808b) moves the Root Hub Status Change interrupt-disable code in ohci-hcd back into the interrupt handler proper, to avoid the chance of adverse interactions with mediocre hardware implementations. It also deletes the root-hub status timer from within the interrupt-enable routine. There's no need to poll for status any more once interrupts are re-enabled. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/usb/host/ohci-hcd.c') diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index ea4714e557e4..a95275a401b1 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) ohci->next_statechange = jiffies + STATECHANGE_DELAY; ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC, ®s->intrstatus); + + /* NOTE: Vendors didn't always make the same implementation + * choices for RHSC. Many followed the spec; RHSC triggers + * on an edge, like setting and maybe clearing a port status + * change bit. With others it's level-triggered, active + * until khubd clears all the port status change bits. We'll + * always disable it here and rely on polling until khubd + * re-enables it. + */ + ohci_writel(ohci, OHCI_INTR_RHSC, ®s->intrdisable); usb_hcd_poll_rh_status(hcd); } -- cgit v1.2.3