From e835c0a4e23c38531dcee5ef77e8d1cf462658c7 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 28 Jun 2023 00:20:18 +0800 Subject: usb: dwc3: don't reset device side if dwc3 was configured as host-only Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") replaces check for HOST only dr_mode with current_dr_role. But during booting, the current_dr_role isn't initialized, thus the device side reset is always issued even if dwc3 was configured as host-only. What's more, on some platforms with host only dwc3, aways issuing device side reset by accessing device register block can cause kernel panic. Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") Cc: stable Signed-off-by: Jisheng Zhang Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230627162018.739-1-jszhang@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb/dwc3/core.c') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f6689b731718..e719e772f926 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode, then we can return early. + * host-only mode or current role is host, then we can return early. */ - if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); -- cgit v1.2.3 From 734ae15ab95a18d3d425fc9cb38b7a627d786f08 Mon Sep 17 00:00:00 2001 From: Jakub Vanek Date: Fri, 14 Jul 2023 14:24:19 +0200 Subject: Revert "usb: dwc3: core: Enable AutoRetry feature in the controller" This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7. AutoRetry has been found to sometimes cause controller freezes when communicating with buggy USB devices. This controller feature allows the controller in host mode to send non-terminating/burst retry ACKs instead of terminating retry ACKs to devices when a transaction error (CRC error or overflow) occurs. Unfortunately, if the USB device continues to respond with a CRC error, the controller will not complete endpoint-related commands while it keeps trying to auto-retry. [3] The xHCI driver will notice this once it tries to abort the transfer using a Stop Endpoint command and does not receive a completion in time. [1] This situation is reported to dmesg: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00 xhci-hcd: xHCI host not responding to stop endpoint command xhci-hcd: xHCI host controller not responding, assume dead xhci-hcd: HC died; cleaning up Some users observed this problem on an Odroid HC2 with the JMS578 USB3-to-SATA bridge. The issue can be triggered by starting a read-heavy workload on an attached SSD. After a while, the host controller would die and the SSD would disappear from the system. [1] Further analysis by Synopsys determined that controller revisions other than the one in Odroid HC2 are also affected by this. The recommended solution was to disable AutoRetry altogether. This change does not have a noticeable performance impact. [2] Revert the enablement commit. This will keep the AutoRetry bit in the default state configured during SoC design [2]. Fixes: b138e23d3dff ("usb: dwc3: core: Enable AutoRetry feature in the controller") Link: https://lore.kernel.org/r/a21f34c04632d250cd0a78c7c6f4a1c9c7a43142.camel@gmail.com/ [1] Link: https://lore.kernel.org/r/20230711214834.kyr6ulync32d4ktk@synopsys.com/ [2] Link: https://lore.kernel.org/r/20230712225518.2smu7wse6djc7l5o@synopsys.com/ [3] Cc: stable@vger.kernel.org Cc: Mauro Ribeiro Cc: Krzysztof Kozlowski Suggested-by: Thinh Nguyen Signed-off-by: Jakub Vanek Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230714122419.27741-1-linuxtardis@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 16 ---------------- drivers/usb/dwc3/core.h | 3 --- 2 files changed, 19 deletions(-) (limited to 'drivers/usb/dwc3/core.c') diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index e719e772f926..9c6bf054f15d 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1209,22 +1209,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } - if (dwc->dr_mode == USB_DR_MODE_HOST || - dwc->dr_mode == USB_DR_MODE_OTG) { - reg = dwc3_readl(dwc->regs, DWC3_GUCTL); - - /* - * Enable Auto retry Feature to make the controller operating in - * Host mode on seeing transaction errors(CRC errors or internal - * overrun scenerios) on IN transfers to reply to the device - * with a non-terminating retry ACK (i.e, an ACK transcation - * packet with Retry=1 & Nump != 0) - */ - reg |= DWC3_GUCTL_HSTINAUTORETRY; - - dwc3_writel(dwc->regs, DWC3_GUCTL, reg); - } - /* * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 8b1295e4dcdd..a69ac67d89fe 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -256,9 +256,6 @@ #define DWC3_GCTL_GBLHIBERNATIONEN BIT(1) #define DWC3_GCTL_DSBLCLKGTNG BIT(0) -/* Global User Control Register */ -#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) - /* Global User Control 1 Register */ #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) -- cgit v1.2.3