From e267a5b3ec59ce88d6be21078e2deb807ca3b436 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Wed, 10 Jan 2024 09:54:03 +0100 Subject: spi: spi-imx: Use dev_err_probe for failed DMA channel requests If dma_request_chan() fails, no error is shown nor any information is shown in /sys/kernel/debug/devices_deferred if -EPROBE_DEFER is returned. Use dev_err_probe to fix both problems. Signed-off-by: Alexander Stein Reviewed-by: Francesco Dolcini Link: https://msgid.link/r/20240110085403.457089-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi/spi-imx.c') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 272bc871a848..546cdce525fc 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1344,7 +1344,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, controller->dma_tx = dma_request_chan(dev, "tx"); if (IS_ERR(controller->dma_tx)) { ret = PTR_ERR(controller->dma_tx); - dev_dbg(dev, "can't get the TX DMA channel, error %d!\n", ret); + dev_err_probe(dev, ret, "can't get the TX DMA channel!\n"); controller->dma_tx = NULL; goto err; } @@ -1353,7 +1353,7 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx, controller->dma_rx = dma_request_chan(dev, "rx"); if (IS_ERR(controller->dma_rx)) { ret = PTR_ERR(controller->dma_rx); - dev_dbg(dev, "can't get the RX DMA channel, error %d\n", ret); + dev_err_probe(dev, ret, "can't get the RX DMA channel!\n"); controller->dma_rx = NULL; goto err; } -- cgit v1.2.3 From c712c05e46c8ce550842951e9e2606e24dbf0475 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Sun, 4 Feb 2024 17:19:12 +0800 Subject: spi: imx: fix the burst length at DMA mode and CPU mode For DMA mode, the bus width of the DMA is equal to the size of data word, so burst length should be configured as bits per word. For CPU mode, because of the spi transfer len is in byte, so calculate the total number of words according to spi transfer len and bits per word, burst length should be configured as total data bits. Signed-off-by: Carlos Song Reviewed-by: Clark Wang Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma") Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits") Link: https://lore.kernel.org/r/20240204091912.36488-1-carlos.song@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/spi/spi-imx.c') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 546cdce525fc..833a1bb7a914 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -2,6 +2,7 @@ // Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. // Copyright (C) 2008 Juergen Beisert +#include #include #include #include @@ -660,15 +661,15 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx, << MX51_ECSPI_CTRL_BL_OFFSET; else { if (spi_imx->usedma) { - ctrl |= (spi_imx->bits_per_word * - spi_imx_bytes_per_word(spi_imx->bits_per_word) - 1) + ctrl |= (spi_imx->bits_per_word - 1) << MX51_ECSPI_CTRL_BL_OFFSET; } else { if (spi_imx->count >= MX51_ECSPI_CTRL_MAX_BURST) - ctrl |= (MX51_ECSPI_CTRL_MAX_BURST - 1) + ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1) << MX51_ECSPI_CTRL_BL_OFFSET; else - ctrl |= (spi_imx->count * spi_imx->bits_per_word - 1) + ctrl |= spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word, + BITS_PER_BYTE) * spi_imx->bits_per_word << MX51_ECSPI_CTRL_BL_OFFSET; } } -- cgit v1.2.3