From c126cf80d450a4d0aac3de7162d4c14b5c971b24 Mon Sep 17 00:00:00 2001 From: "Eddie C. Dost" Date: Wed, 18 Jan 2006 14:54:31 -0800 Subject: [SPARC64]: Serial Console for E250 Patch From: Eddie C. Dost I have the following patch for serial console over the RSC (remote system controller) on my E250 machine. It basically adds support for input-device=rsc and output-device=rsc from OBP, and allows 115200,8,n,1,- serial mode setting. Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/serial/sunsab.c') diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 7e773ff76c61..8bcaebcc0ad7 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -897,9 +897,6 @@ static int sunsab_console_setup(struct console *con, char *options) sunserial_console_termios(con); - /* Firmware console speed is limited to 150-->38400 baud so - * this hackish cflag thing is OK. - */ switch (con->cflag & CBAUD) { case B150: baud = 150; break; case B300: baud = 300; break; @@ -910,6 +907,10 @@ static int sunsab_console_setup(struct console *con, char *options) default: case B9600: baud = 9600; break; case B19200: baud = 19200; break; case B38400: baud = 38400; break; + case B57600: baud = 57600; break; + case B115200: baud = 115200; break; + case B230400: baud = 230400; break; + case B460800: baud = 460800; break; }; /* -- cgit v1.2.3