From d3fa9e7d270e3d9b3fda325cdcb2ea77a00ed876 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Fri, 28 May 2010 15:08:16 -0700
Subject: [SCSI] qla2xxx: Add portid to async-request messages.

This helps to correlate submission/completion messages during
triaging.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index be3d8bed2ecf..bc82ba99f251 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -918,12 +918,15 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	    QLA_LOGIO_LOGIN_RETRIED : 0;
 	if (mbx->entry_status) {
 		DEBUG2(printk(KERN_WARNING
-		    "scsi(%ld:%x): Async-%s error entry - entry-status=%x "
-		    "status=%x state-flag=%x status-flags=%x.\n",
+		    "scsi(%ld:%x): Async-%s error entry - portid=%02x%02x%02x "
+		    "entry-status=%x status=%x state-flag=%x "
+		    "status-flags=%x.\n",
 		    fcport->vha->host_no, sp->handle, type,
-		    mbx->entry_status, le16_to_cpu(mbx->status),
-		    le16_to_cpu(mbx->state_flags),
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa, mbx->entry_status,
+		    le16_to_cpu(mbx->status), le16_to_cpu(mbx->state_flags),
 		    le16_to_cpu(mbx->status_flags)));
+
 		DEBUG2(qla2x00_dump_buffer((uint8_t *)mbx, sizeof(*mbx)));
 
 		goto logio_done;
@@ -935,9 +938,11 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 		status = 0;
 	if (!status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) {
 		DEBUG2(printk(KERN_DEBUG
-		    "scsi(%ld:%x): Async-%s complete - mbx1=%x.\n",
+		    "scsi(%ld:%x): Async-%s complete - portid=%02x%02x%02x "
+		    "mbx1=%x.\n",
 		    fcport->vha->host_no, sp->handle, type,
-		    le16_to_cpu(mbx->mb1)));
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa, le16_to_cpu(mbx->mb1)));
 
 		data[0] = MBS_COMMAND_COMPLETE;
 		if (ctx->type == SRB_LOGIN_CMD) {
@@ -963,9 +968,10 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	}
 
 	DEBUG2(printk(KERN_WARNING
-	    "scsi(%ld:%x): Async-%s failed - status=%x mb0=%x mb1=%x mb2=%x "
-	    "mb6=%x mb7=%x.\n",
-	    fcport->vha->host_no, sp->handle, type, status,
+	    "scsi(%ld:%x): Async-%s failed - portid=%02x%02x%02x status=%x "
+	    "mb0=%x mb1=%x mb2=%x mb6=%x mb7=%x.\n",
+	    fcport->vha->host_no, sp->handle, type, fcport->d_id.b.domain,
+	    fcport->d_id.b.area, fcport->d_id.b.al_pa, status,
 	    le16_to_cpu(mbx->mb0), le16_to_cpu(mbx->mb1),
 	    le16_to_cpu(mbx->mb2), le16_to_cpu(mbx->mb6),
 	    le16_to_cpu(mbx->mb7)));
@@ -1096,9 +1102,11 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 		QLA_LOGIO_LOGIN_RETRIED : 0;
 	if (logio->entry_status) {
 		DEBUG2(printk(KERN_WARNING
-		    "scsi(%ld:%x): Async-%s error entry - entry-status=%x.\n",
+		    "scsi(%ld:%x): Async-%s error entry - "
+		    "portid=%02x%02x%02x entry-status=%x.\n",
 		    fcport->vha->host_no, sp->handle, type,
-		    logio->entry_status));
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa, logio->entry_status));
 		DEBUG2(qla2x00_dump_buffer((uint8_t *)logio, sizeof(*logio)));
 
 		goto logio_done;
@@ -1106,8 +1114,11 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 
 	if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
 		DEBUG2(printk(KERN_DEBUG
-		    "scsi(%ld:%x): Async-%s complete - iop0=%x.\n",
+		    "scsi(%ld:%x): Async-%s complete - portid=%02x%02x%02x "
+		    "iop0=%x.\n",
 		    fcport->vha->host_no, sp->handle, type,
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa,
 		    le32_to_cpu(logio->io_parameter[0])));
 
 		data[0] = MBS_COMMAND_COMPLETE;
@@ -1152,8 +1163,10 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 	}
 
 	DEBUG2(printk(KERN_WARNING
-	    "scsi(%ld:%x): Async-%s failed - comp=%x iop0=%x iop1=%x.\n",
-	    fcport->vha->host_no, sp->handle, type,
+	    "scsi(%ld:%x): Async-%s failed - portid=%02x%02x%02x comp=%x "
+	    "iop0=%x iop1=%x.\n",
+	    fcport->vha->host_no, sp->handle, type, fcport->d_id.b.domain,
+	    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 	    le16_to_cpu(logio->comp_status),
 	    le32_to_cpu(logio->io_parameter[0]),
 	    le32_to_cpu(logio->io_parameter[1])));
-- 
cgit v1.2.3


From 6ac5260850841eb4055811a68ff47d658ebe9a59 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Fri, 28 May 2010 15:08:19 -0700
Subject: [SCSI] qla2xxx: Correct async-srb issues.

* hold the hardware_lock throughout the duration of ctx-sp
  timeout handling -- could result in use-after-free oops.

* retry a timed-out login-request.

* done() routines are called with the hardware-lock held, issue
qla2x00_mark_device_lost() with proper 'defer' flag.

* FCP2 capabilities are only relevant to target devices.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_init.c | 20 ++++++++++++++------
 drivers/scsi/qla2xxx/qla_isr.c  |  2 +-
 2 files changed, 15 insertions(+), 7 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 4bf973483818..cc7352545081 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -60,9 +60,8 @@ qla2x00_ctx_sp_timeout(unsigned long __data)
 	ctx = sp->ctx;
 	iocb = ctx->u.iocb_cmd;
 	iocb->timeout(sp);
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
 	iocb->free(sp);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
 void
@@ -137,8 +136,16 @@ qla2x00_async_iocb_timeout(srb_t *sp)
 		fcport->d_id.b.area, fcport->d_id.b.al_pa));
 
 	fcport->flags &= ~FCF_ASYNC_SENT;
-	if (ctx->type == SRB_LOGIN_CMD)
+	if (ctx->type == SRB_LOGIN_CMD) {
+		struct srb_iocb *lio = ctx->u.iocb_cmd;
 		qla2x00_post_async_logout_work(fcport->vha, fcport, NULL);
+		/* Retry as needed. */
+		lio->u.logio.data[0] = MBS_COMMAND_ERROR;
+		lio->u.logio.data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ?
+			QLA_LOGIO_LOGIN_RETRIED : 0;
+		qla2x00_post_async_login_done_work(fcport->vha, fcport,
+			lio->u.logio.data);
+	}
 }
 
 static void
@@ -420,10 +427,11 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		else
-			qla2x00_mark_device_lost(vha, fcport, 1, 0);
+			qla2x00_mark_device_lost(vha, fcport, 1, 1);
 		break;
 	case MBS_PORT_ID_USED:
 		fcport->loop_id = data[1];
+		qla2x00_post_async_logout_work(vha, fcport, NULL);
 		qla2x00_post_async_login_work(vha, fcport, NULL);
 		break;
 	case MBS_LOOP_ID_USED:
@@ -431,7 +439,7 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 		rval = qla2x00_find_new_loop_id(vha, fcport);
 		if (rval != QLA_SUCCESS) {
 			fcport->flags &= ~FCF_ASYNC_SENT;
-			qla2x00_mark_device_lost(vha, fcport, 1, 0);
+			qla2x00_mark_device_lost(vha, fcport, 1, 1);
 			break;
 		}
 		qla2x00_post_async_login_work(vha, fcport, NULL);
@@ -463,7 +471,7 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 	if (data[1] & QLA_LOGIO_LOGIN_RETRIED)
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 	else
-		qla2x00_mark_device_lost(vha, fcport, 1, 0);
+		qla2x00_mark_device_lost(vha, fcport, 1, 1);
 
 	return;
 }
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index bc82ba99f251..912befdceb16 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -949,7 +949,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 			fcport->port_type = FCT_TARGET;
 			if (le16_to_cpu(mbx->mb1) & BIT_0)
 				fcport->port_type = FCT_INITIATOR;
-			if (le16_to_cpu(mbx->mb1) & BIT_1)
+			else if (le16_to_cpu(mbx->mb1) & BIT_1)
 				fcport->flags |= FCF_FCP2_DEVICE;
 		}
 		goto logio_done;
-- 
cgit v1.2.3


From 23f2ebd17a13835c5b34994d2c2e5faacc127947 Mon Sep 17 00:00:00 2001
From: Sarang Radke <sarang.radke@qlogic.com>
Date: Fri, 28 May 2010 15:08:21 -0700
Subject: [SCSI] qla2xxx: Add internal loopback support for ISP81xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_bsg.c | 196 +++++++++++++++++++++++++++++++++++++----
 drivers/scsi/qla2xxx/qla_bsg.h |   7 ++
 drivers/scsi/qla2xxx/qla_def.h |   4 +
 drivers/scsi/qla2xxx/qla_gbl.h |   5 ++
 drivers/scsi/qla2xxx/qla_isr.c |   7 +-
 drivers/scsi/qla2xxx/qla_mbx.c |  66 ++++++++++++++
 drivers/scsi/qla2xxx/qla_os.c  |   1 +
 7 files changed, 269 insertions(+), 17 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b905dfe5ea61..3a0248388505 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -483,6 +483,98 @@ done:
 	return rval;
 }
 
+/* Set the port configuration to enable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_set_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+    uint16_t *new_config)
+{
+	int ret = 0;
+	int rval = 0;
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA81XX(ha))
+		goto done_set_internal;
+
+	new_config[0] = config[0] | (ENABLE_INTERNAL_LOOPBACK << 1);
+	memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+	ha->notify_dcbx_comp = 1;
+	ret = qla81xx_set_port_config(vha, new_config);
+	if (ret != QLA_SUCCESS) {
+		DEBUG2(printk(KERN_ERR
+		    "%s(%lu): Set port config failed\n",
+		    __func__, vha->host_no));
+		ha->notify_dcbx_comp = 0;
+		rval = -EINVAL;
+		goto done_set_internal;
+	}
+
+	/* Wait for DCBX complete event */
+	if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) {
+		DEBUG2(qla_printk(KERN_WARNING, ha,
+		    "State change notificaition not received.\n"));
+	} else
+		DEBUG2(qla_printk(KERN_INFO, ha,
+		    "State change RECEIVED\n"));
+
+	ha->notify_dcbx_comp = 0;
+
+done_set_internal:
+	return rval;
+}
+
+/* Set the port configuration to disable the
+ * internal loopback on ISP81XX
+ */
+static inline int
+qla81xx_reset_internal_loopback(scsi_qla_host_t *vha, uint16_t *config,
+    int wait)
+{
+	int ret = 0;
+	int rval = 0;
+	uint16_t new_config[4];
+	struct qla_hw_data *ha = vha->hw;
+
+	if (!IS_QLA81XX(ha))
+		goto done_reset_internal;
+
+	memset(new_config, 0 , sizeof(new_config));
+	if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 ==
+			ENABLE_INTERNAL_LOOPBACK) {
+		new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK;
+		memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ;
+
+		ha->notify_dcbx_comp = wait;
+		ret = qla81xx_set_port_config(vha, new_config);
+		if (ret != QLA_SUCCESS) {
+			DEBUG2(printk(KERN_ERR
+			    "%s(%lu): Set port config failed\n",
+			     __func__, vha->host_no));
+			ha->notify_dcbx_comp = 0;
+			rval = -EINVAL;
+			goto done_reset_internal;
+		}
+
+		/* Wait for DCBX complete event */
+		if (wait && !wait_for_completion_timeout(&ha->dcbx_comp,
+			(20 * HZ))) {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			    "State change notificaition not received.\n"));
+			ha->notify_dcbx_comp = 0;
+			rval = -EINVAL;
+			goto done_reset_internal;
+		} else
+			DEBUG2(qla_printk(KERN_INFO, ha,
+			    "State change RECEIVED\n"));
+
+		ha->notify_dcbx_comp = 0;
+	}
+done_reset_internal:
+	return rval;
+}
+
 static int
 qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 {
@@ -494,6 +586,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 	char *type;
 	struct msg_echo_lb elreq;
 	uint16_t response[MAILBOX_REGISTER_COUNT];
+	uint16_t config[4], new_config[4];
 	uint8_t *fw_sts_ptr;
 	uint8_t *req_data = NULL;
 	dma_addr_t req_data_dma;
@@ -568,29 +661,102 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 
 	elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
 
-	if (ha->current_topology != ISP_CFG_F) {
-		type = "FC_BSG_HST_VENDOR_LOOPBACK";
+	if ((ha->current_topology == ISP_CFG_F ||
+	    (IS_QLA81XX(ha) &&
+	    le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE
+	    && req_data_len == MAX_ELS_FRAME_PAYLOAD)) &&
+		elreq.options == EXTERNAL_LOOPBACK) {
+		type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
 		DEBUG2(qla_printk(KERN_INFO, ha,
-			"scsi(%ld) bsg rqst type: %s\n",
-			vha->host_no, type));
-
-		command_sent = INT_DEF_LB_LOOPBACK_CMD;
-		rval = qla2x00_loopback_test(vha, &elreq, response);
+			"scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
+		command_sent = INT_DEF_LB_ECHO_CMD;
+		rval = qla2x00_echo_test(vha, &elreq, response);
+	} else {
 		if (IS_QLA81XX(ha)) {
+			memset(config, 0, sizeof(config));
+			memset(new_config, 0, sizeof(new_config));
+			if (qla81xx_get_port_config(vha, config)) {
+				DEBUG2(printk(KERN_ERR
+					"%s(%lu): Get port config failed\n",
+					__func__, vha->host_no));
+				bsg_job->reply->reply_payload_rcv_len = 0;
+				bsg_job->reply->result = (DID_ERROR << 16);
+				rval = -EPERM;
+				goto done_free_dma_req;
+			}
+
+			if (elreq.options != EXTERNAL_LOOPBACK) {
+				DEBUG2(qla_printk(KERN_INFO, ha,
+					"Internal: current port config = %x\n",
+					config[0]));
+				if (qla81xx_set_internal_loopback(vha, config,
+					new_config)) {
+					bsg_job->reply->reply_payload_rcv_len =
+						0;
+					bsg_job->reply->result =
+						(DID_ERROR << 16);
+					rval = -EPERM;
+					goto done_free_dma_req;
+				}
+			} else {
+				/* For external loopback to work
+				 * ensure internal loopback is disabled
+				 */
+				if (qla81xx_reset_internal_loopback(vha,
+					config, 1)) {
+					bsg_job->reply->reply_payload_rcv_len =
+						0;
+					bsg_job->reply->result =
+						(DID_ERROR << 16);
+					rval = -EPERM;
+					goto done_free_dma_req;
+				}
+			}
+
+			type = "FC_BSG_HST_VENDOR_LOOPBACK";
+			DEBUG2(qla_printk(KERN_INFO, ha,
+				"scsi(%ld) bsg rqst type: %s\n",
+				vha->host_no, type));
+
+			command_sent = INT_DEF_LB_LOOPBACK_CMD;
+			rval = qla2x00_loopback_test(vha, &elreq, response);
+
+			if (new_config[1]) {
+				/* Revert back to original port config
+				 * Also clear internal loopback
+				 */
+				qla81xx_reset_internal_loopback(vha,
+				    new_config, 0);
+			}
+
 			if (response[0] == MBS_COMMAND_ERROR &&
-				response[1] == MBS_LB_RESET) {
+					response[1] == MBS_LB_RESET) {
 				DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing "
-				"ISP\n", __func__, vha->host_no));
+					"ISP\n", __func__, vha->host_no));
 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 				qla2xxx_wake_dpc(vha);
+				qla2x00_wait_for_chip_reset(vha);
+				/* Also reset the MPI */
+				if (qla81xx_restart_mpi_firmware(vha) !=
+				    QLA_SUCCESS) {
+					qla_printk(KERN_INFO, ha,
+					    "MPI reset failed for host%ld.\n",
+					    vha->host_no);
+				}
+
+				bsg_job->reply->reply_payload_rcv_len = 0;
+				bsg_job->reply->result = (DID_ERROR << 16);
+				rval = -EIO;
+				goto done_free_dma_req;
 			}
+		} else {
+			type = "FC_BSG_HST_VENDOR_LOOPBACK";
+			DEBUG2(qla_printk(KERN_INFO, ha,
+				"scsi(%ld) bsg rqst type: %s\n",
+				vha->host_no, type));
+			command_sent = INT_DEF_LB_LOOPBACK_CMD;
+			rval = qla2x00_loopback_test(vha, &elreq, response);
 		}
-	} else {
-		type = "FC_BSG_HST_VENDOR_ECHO_DIAG";
-		DEBUG2(qla_printk(KERN_INFO, ha,
-		    "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type));
-		command_sent = INT_DEF_LB_ECHO_CMD;
-		rval = qla2x00_echo_test(vha, &elreq, response);
 	}
 
 	if (rval) {
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 76ed92dd2ef2..1f096dabc015 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -19,6 +19,13 @@
 #define INT_DEF_LB_LOOPBACK_CMD         0
 #define INT_DEF_LB_ECHO_CMD             1
 
+/* Loopback related definations */
+#define EXTERNAL_LOOPBACK		0xF2
+#define ENABLE_INTERNAL_LOOPBACK	0x02
+#define INTERNAL_LOOPBACK_MASK		0x000E
+#define MAX_ELS_FRAME_PAYLOAD		252
+#define ELS_OPCODE_BYTE			0x10
+
 /* BSG Vendor specific definations */
 #define A84_ISSUE_WRITE_TYPE_CMD        0
 #define A84_ISSUE_READ_TYPE_CMD         1
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index f8239bff0924..2895855adc9a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -714,6 +714,8 @@ typedef struct {
 #define MBC_SEND_RNFT_ELS		0x5e	/* Send RNFT ELS request */
 #define MBC_GET_LINK_PRIV_STATS		0x6d	/* Get link & private data. */
 #define MBC_SET_VENDOR_ID		0x76	/* Set Vendor ID. */
+#define MBC_SET_PORT_CONFIG		0x122	/* Set port configuration */
+#define MBC_GET_PORT_CONFIG		0x123	/* Get port configuration */
 
 /* Firmware return data sizes */
 #define FCAL_MAP_SIZE	128
@@ -2631,6 +2633,8 @@ struct qla_hw_data {
 	struct mutex vport_lock;        /* Virtual port synchronization */
 	struct completion mbx_cmd_comp; /* Serialize mbx access */
 	struct completion mbx_intr_comp;  /* Used for completion notification */
+	struct completion dcbx_comp;	/* For set port config notification */
+	int notify_dcbx_comp;
 
 	/* Basic firmware related information. */
 	uint16_t	fw_major_version;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 2247ef8702e4..7ae2ee42564e 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -357,6 +357,11 @@ qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
 extern int qla2x00_get_data_rate(scsi_qla_host_t *);
 extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t,
 	uint16_t *);
+extern int
+qla81xx_get_port_config(scsi_qla_host_t *, uint16_t *);
+
+extern int
+qla81xx_set_port_config(scsi_qla_host_t *, uint16_t *);
 
 /*
  * Global Function Prototypes in qla_isr.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 912befdceb16..e51fc5f9fcdb 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -545,10 +545,13 @@ skip_rio:
 		if (IS_QLA2100(ha))
 			break;
 
-		if (IS_QLA8XXX_TYPE(ha))
+		if (IS_QLA8XXX_TYPE(ha)) {
 			DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x "
 			    "%04x\n", vha->host_no, mb[1], mb[2], mb[3]));
-		else
+			if (ha->notify_dcbx_comp)
+				complete(&ha->dcbx_comp);
+
+		} else
 			DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE "
 			    "received.\n", vha->host_no));
 
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 043f808ba3f4..10f4815aec77 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3949,6 +3949,72 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
 	return rval;
 }
 
+int
+qla81xx_get_port_config(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	DEBUG11(printk(KERN_INFO
+	    "%s(%ld): entered.\n", __func__, vha->host_no));
+
+	if (!IS_QLA81XX(ha))
+		return QLA_FUNCTION_FAILED;
+	mcp->mb[0] = MBC_GET_PORT_CONFIG;
+	mcp->out_mb = MBX_0;
+	mcp->in_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_WARNING
+		    "%s(%ld): failed=%x (%x).\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else {
+		/* Copy all bits to preserve original value */
+		memcpy(mb, &mcp->mb[1], sizeof(uint16_t) * 4);
+
+		DEBUG11(printk(KERN_INFO
+		    "%s(%ld): done.\n", __func__, vha->host_no));
+	}
+	return rval;
+}
+
+int
+qla81xx_set_port_config(scsi_qla_host_t *vha, uint16_t *mb)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+
+	DEBUG11(printk(KERN_INFO
+	    "%s(%ld): entered.\n", __func__, vha->host_no));
+
+	mcp->mb[0] = MBC_SET_PORT_CONFIG;
+	/* Copy all bits to preserve original setting */
+	memcpy(&mcp->mb[1], mb, sizeof(uint16_t) * 4);
+	mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_WARNING
+		    "%s(%ld): failed=%x (%x).\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+	} else
+		DEBUG11(printk(KERN_INFO
+		    "%s(%ld): done.\n", __func__, vha->host_no));
+
+	return rval;
+}
+
+
 int
 qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 		uint16_t *mb)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9e656296b757..fa59181bcb02 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2128,6 +2128,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	init_completion(&ha->mbx_cmd_comp);
 	complete(&ha->mbx_cmd_comp);
 	init_completion(&ha->mbx_intr_comp);
+	init_completion(&ha->dcbx_comp);
 
 	set_bit(0, (unsigned long *) ha->vp_idx_map);
 
-- 
cgit v1.2.3


From b0cd579cde8ee0c7ed52239531ba09bcbc5b54c2 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Fri, 28 May 2010 15:08:22 -0700
Subject: [SCSI] qla2xxx: Make the FC port capability mutual exclusive.

In case of both target and initiator capabilities reported by fc port,
the fc port port capability is made mutualy exclusive with priority given
for target capabilities.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index e51fc5f9fcdb..8a608725eb76 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1133,9 +1133,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 			fcport->port_type = FCT_TARGET;
 			if (iop[0] & BIT_8)
 				fcport->flags |= FCF_FCP2_DEVICE;
-		}
-		if (iop[0] & BIT_5)
+		} else if (iop[0] & BIT_5)
 			fcport->port_type = FCT_INITIATOR;
+
 		if (logio->io_parameter[7] || logio->io_parameter[8])
 			fcport->supported_classes |= FC_COS_CLASS2;
 		if (logio->io_parameter[9] || logio->io_parameter[10])
-- 
cgit v1.2.3


From d94d10e7277069801b4e31b40770314a8421f996 Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Fri, 23 Jul 2010 15:28:23 +0500
Subject: [SCSI] qla2xxx: Removed dependency for SRB structure for Marker
 processing

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_def.h  |  11 ----
 drivers/scsi/qla2xxx/qla_gbl.h  |   4 +-
 drivers/scsi/qla2xxx/qla_init.c |  73 +---------------------
 drivers/scsi/qla2xxx/qla_iocb.c | 134 +++++-----------------------------------
 drivers/scsi/qla2xxx/qla_isr.c  |  37 -----------
 5 files changed, 19 insertions(+), 240 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2bb187e23db0..7f9f86b8140b 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -250,16 +250,6 @@ struct srb_iocb {
 			uint32_t lun;
 			uint32_t data;
 		} tmf;
-		struct {
-			/*
-			 * values for modif field below are as
-			 * defined in mrk_entry_24xx struct
-			 * for the modifier field in qla_fw.h.
-			 */
-			uint8_t modif;
-			uint16_t lun;
-			uint32_t data;
-		} marker;
 	} u;
 
 	struct timer_list timer;
@@ -277,7 +267,6 @@ struct srb_iocb {
 #define SRB_CT_CMD	5
 #define SRB_ADISC_CMD	6
 #define SRB_TM_CMD	7
-#define SRB_MARKER_CMD	8
 
 struct srb_ctx {
 	uint16_t type;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 7ae2ee42564e..fd299911d7d6 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -59,7 +59,6 @@ extern int qla2x00_async_logout(struct scsi_qla_host *, fc_port_t *);
 extern int qla2x00_async_adisc(struct scsi_qla_host *, fc_port_t *,
     uint16_t *);
 extern int qla2x00_async_tm_cmd(fc_port_t *, uint32_t, uint32_t, uint32_t);
-extern int qla2x00_async_marker(fc_port_t *, uint16_t, uint8_t);
 extern void qla2x00_async_login_done(struct scsi_qla_host *, fc_port_t *,
     uint16_t *);
 extern void qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *,
@@ -68,8 +67,7 @@ extern void qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *,
     uint16_t *);
 extern void qla2x00_async_tm_cmd_done(struct scsi_qla_host *, fc_port_t *,
 	struct srb_iocb *);
-extern void qla2x00_async_marker_done(struct scsi_qla_host *, fc_port_t *,
-	struct srb_iocb *);
+extern void *qla2x00_alloc_iocbs(struct scsi_qla_host *, srb_t *);
 
 extern fc_port_t *
 qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t );
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d0b993c8a189..5bc317070371 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -367,58 +367,6 @@ done:
 	return rval;
 }
 
-static void
-qla2x00_async_marker_ctx_done(srb_t *sp)
-{
-	struct srb_ctx *ctx = sp->ctx;
-	struct srb_iocb *iocb = (struct srb_iocb *)ctx->u.iocb_cmd;
-
-	qla2x00_async_marker_done(sp->fcport->vha, sp->fcport, iocb);
-	iocb->free(sp);
-}
-
-int
-qla2x00_async_marker(fc_port_t *fcport, uint16_t lun, uint8_t modif)
-{
-	struct scsi_qla_host *vha = fcport->vha;
-	srb_t *sp;
-	struct srb_ctx *ctx;
-	struct srb_iocb *mrk;
-	int rval;
-
-	rval = QLA_FUNCTION_FAILED;
-	sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), 0);
-	if (!sp)
-		goto done;
-
-	ctx = sp->ctx;
-	ctx->type = SRB_MARKER_CMD;
-	ctx->name = "marker";
-	mrk = ctx->u.iocb_cmd;
-	mrk->u.marker.lun = lun;
-	mrk->u.marker.modif = modif;
-	mrk->timeout = qla2x00_async_iocb_timeout;
-	mrk->done = qla2x00_async_marker_ctx_done;
-
-	rval = qla2x00_start_sp(sp);
-	if (rval != QLA_SUCCESS)
-		goto done_free_sp;
-
-	DEBUG2(printk(KERN_DEBUG
-	    "scsi(%ld:%x): Async-marker - loop-id=%x "
-	    "portid=%02x%02x%02x.\n",
-	    fcport->vha->host_no, sp->handle, fcport->loop_id,
-	    fcport->d_id.b.domain, fcport->d_id.b.area,
-	    fcport->d_id.b.al_pa));
-
-	return rval;
-
-done_free_sp:
-	mrk->free(sp);
-done:
-	return rval;
-}
-
 void
 qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport,
     uint16_t *data)
@@ -500,7 +448,8 @@ qla2x00_async_tm_cmd_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 	lun = (uint16_t)iocb->u.tmf.lun;
 
 	/* Issue Marker IOCB */
-	rval = qla2x00_async_marker(fcport, lun,
+	rval = qla2x00_marker(vha, vha->hw->req_q_map[0],
+		vha->hw->rsp_q_map[0], fcport->loop_id, lun,
 		flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID);
 
 	if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) {
@@ -512,24 +461,6 @@ qla2x00_async_tm_cmd_done(struct scsi_qla_host *vha, fc_port_t *fcport,
 	return;
 }
 
-void
-qla2x00_async_marker_done(struct scsi_qla_host *vha, fc_port_t *fcport,
-    struct srb_iocb *iocb)
-{
-	/*
-	 * Currently we dont have any specific post response processing
-	 * for this IOCB. We'll just return success or failed
-	 * depending on whether the IOCB command succeeded or failed.
-	 */
-	if (iocb->u.tmf.data) {
-		DEBUG2_3_11(printk(KERN_WARNING
-		    "%s(%ld): Marker IOCB failed (%x).\n",
-		    __func__, vha->host_no, iocb->u.tmf.data));
-	}
-
-	return;
-}
-
 /****************************************************************************/
 /*                QLogic ISP2x00 Hardware Support Functions.                */
 /****************************************************************************/
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5d0e99c2b522..370646f7b3ff 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -11,8 +11,6 @@
 
 #include <scsi/scsi_tcq.h>
 
-static request_t *qla2x00_req_pkt(struct scsi_qla_host *, struct req_que *,
-							struct rsp_que *rsp);
 static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
 
 static void qla25xx_set_que(srb_t *, struct rsp_que **);
@@ -474,7 +472,7 @@ __qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
 	mrk24 = NULL;
-	mrk = (mrk_entry_t *)qla2x00_req_pkt(vha, req, rsp);
+	mrk = (mrk_entry_t *)qla2x00_alloc_iocbs(vha, 0);
 	if (mrk == NULL) {
 		DEBUG2_3(printk("%s(%ld): failed to allocate Marker IOCB.\n",
 		    __func__, base_vha->host_no));
@@ -520,84 +518,6 @@ qla2x00_marker(struct scsi_qla_host *vha, struct req_que *req,
 	return (ret);
 }
 
-/**
- * qla2x00_req_pkt() - Retrieve a request packet from the request ring.
- * @ha: HA context
- *
- * Note: The caller must hold the hardware lock before calling this routine.
- *
- * Returns NULL if function failed, else, a pointer to the request packet.
- */
-static request_t *
-qla2x00_req_pkt(struct scsi_qla_host *vha, struct req_que *req,
-		struct rsp_que *rsp)
-{
-	struct qla_hw_data *ha = vha->hw;
-	device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id);
-	request_t	*pkt = NULL;
-	uint16_t	cnt;
-	uint32_t	*dword_ptr;
-	uint32_t	timer;
-	uint16_t	req_cnt = 1;
-
-	/* Wait 1 second for slot. */
-	for (timer = HZ; timer; timer--) {
-		if ((req_cnt + 2) >= req->cnt) {
-			/* Calculate number of free request entries. */
-			if (ha->mqenable)
-				cnt = (uint16_t)
-					RD_REG_DWORD(&reg->isp25mq.req_q_out);
-			else {
-				if (IS_QLA82XX(ha))
-					cnt = (uint16_t)RD_REG_DWORD(
-					    &reg->isp82.req_q_out);
-				else if (IS_FWI2_CAPABLE(ha))
-					cnt = (uint16_t)RD_REG_DWORD(
-						&reg->isp24.req_q_out);
-				else
-					cnt = qla2x00_debounce_register(
-						ISP_REQ_Q_OUT(ha, &reg->isp));
-			}
-			if  (req->ring_index < cnt)
-				req->cnt = cnt - req->ring_index;
-			else
-				req->cnt = req->length -
-				    (req->ring_index - cnt);
-		}
-		/* If room for request in request ring. */
-		if ((req_cnt + 2) < req->cnt) {
-			req->cnt--;
-			pkt = req->ring_ptr;
-
-			/* Zero out packet. */
-			dword_ptr = (uint32_t *)pkt;
-			for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
-				*dword_ptr++ = 0;
-
-			/* Set entry count. */
-			pkt->entry_count = 1;
-
-			break;
-		}
-
-		/* Release ring specific lock */
-		spin_unlock_irq(&ha->hardware_lock);
-
-		udelay(2);   /* 2 us */
-
-		/* Check for pending interrupts. */
-		/* During init we issue marker directly */
-		if (!vha->marker_needed && !vha->flags.init_done)
-			qla2x00_poll(rsp);
-		spin_lock_irq(&ha->hardware_lock);
-	}
-	if (!pkt) {
-		DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
-	}
-
-	return (pkt);
-}
-
 /**
  * qla2x00_isp_cmd() - Modify the request ring pointer.
  * @ha: HA context
@@ -1559,11 +1479,9 @@ static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp)
 }
 
 /* Generic Control-SRB manipulation functions. */
-
-static void *
-qla2x00_alloc_iocbs(srb_t *sp)
+void *
+qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp)
 {
-	scsi_qla_host_t	*vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
 	device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id);
@@ -1573,6 +1491,10 @@ qla2x00_alloc_iocbs(srb_t *sp)
 
 	pkt = NULL;
 	req_cnt = 1;
+	handle = 0;
+
+	if (!sp)
+		goto skip_cmd_array;
 
 	/* Check for room in outstanding command list. */
 	handle = req->current_outstanding_cmd;
@@ -1586,10 +1508,18 @@ qla2x00_alloc_iocbs(srb_t *sp)
 	if (index == MAX_OUTSTANDING_COMMANDS)
 		goto queuing_error;
 
+	/* Prep command array. */
+	req->current_outstanding_cmd = handle;
+	req->outstanding_cmds[handle] = sp;
+	sp->handle = handle;
+
+skip_cmd_array:
 	/* Check for room on request queue. */
 	if (req->cnt < req_cnt) {
 		if (ha->mqenable)
 			cnt = RD_REG_DWORD(&reg->isp25mq.req_q_out);
+		else if (IS_QLA82XX(ha))
+			cnt = RD_REG_DWORD(&reg->isp82.req_q_out);
 		else if (IS_FWI2_CAPABLE(ha))
 			cnt = RD_REG_DWORD(&reg->isp24.req_q_out);
 		else
@@ -1606,15 +1536,11 @@ qla2x00_alloc_iocbs(srb_t *sp)
 		goto queuing_error;
 
 	/* Prep packet */
-	req->current_outstanding_cmd = handle;
-	req->outstanding_cmds[handle] = sp;
 	req->cnt -= req_cnt;
-
 	pkt = req->ring_ptr;
 	memset(pkt, 0, REQUEST_ENTRY_SIZE);
 	pkt->entry_count = req_cnt;
 	pkt->handle = handle;
-	sp->handle = handle;
 
 queuing_error:
 	return pkt;
@@ -1794,31 +1720,6 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk)
 	}
 }
 
-static void
-qla24xx_marker_iocb(srb_t *sp, struct mrk_entry_24xx *mrk)
-{
-	uint16_t lun;
-	uint8_t modif;
-	struct fc_port *fcport = sp->fcport;
-	scsi_qla_host_t *vha = fcport->vha;
-	struct srb_ctx *ctx = sp->ctx;
-	struct srb_iocb *iocb = ctx->u.iocb_cmd;
-	struct req_que *req = vha->req;
-
-	lun = iocb->u.marker.lun;
-	modif = iocb->u.marker.modif;
-	mrk->entry_type = MARKER_TYPE;
-	mrk->modifier = modif;
-	if (modif !=  MK_SYNC_ALL) {
-		mrk->nport_handle = cpu_to_le16(fcport->loop_id);
-		mrk->lun[1] = LSB(lun);
-		mrk->lun[2] = MSB(lun);
-		host_to_fcp_swap(mrk->lun, sizeof(mrk->lun));
-		mrk->vp_index = vha->vp_idx;
-		mrk->handle = MAKE_HANDLE(req->id, mrk->handle);
-	}
-}
-
 static void
 qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
 {
@@ -1945,7 +1846,7 @@ qla2x00_start_sp(srb_t *sp)
 
 	rval = QLA_FUNCTION_FAILED;
 	spin_lock_irqsave(&ha->hardware_lock, flags);
-	pkt = qla2x00_alloc_iocbs(sp);
+	pkt = qla2x00_alloc_iocbs(sp->fcport->vha, sp);
 	if (!pkt)
 		goto done;
 
@@ -1976,9 +1877,6 @@ qla2x00_start_sp(srb_t *sp)
 	case SRB_TM_CMD:
 		qla24xx_tm_iocb(sp, pkt);
 		break;
-	case SRB_MARKER_CMD:
-		qla24xx_marker_iocb(sp, pkt);
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 8a608725eb76..ba971ac1c4e8 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1238,39 +1238,6 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
 	iocb->done(sp);
 }
 
-static void
-qla24xx_marker_iocb_entry(scsi_qla_host_t *vha, struct req_que *req,
-    struct mrk_entry_24xx *mrk)
-{
-	const char func[] = "MRK-IOCB";
-	const char *type;
-	fc_port_t *fcport;
-	srb_t *sp;
-	struct srb_iocb *iocb;
-	struct srb_ctx *ctx;
-	struct sts_entry_24xx *sts = (struct sts_entry_24xx *)mrk;
-
-	sp = qla2x00_get_sp_from_handle(vha, func, req, mrk);
-	if (!sp)
-		return;
-
-	ctx = sp->ctx;
-	iocb = ctx->u.iocb_cmd;
-	type = ctx->name;
-	fcport = sp->fcport;
-
-	if (sts->entry_status) {
-		iocb->u.marker.data = 1;
-		DEBUG2(printk(KERN_WARNING
-		    "scsi(%ld:%x): Async-%s error entry - entry-status=%x.\n",
-		    fcport->vha->host_no, sp->handle, type,
-		    sts->entry_status));
-		DEBUG2(qla2x00_dump_buffer((uint8_t *)mrk, sizeof(*sts)));
-	}
-
-	iocb->done(sp);
-}
-
 /**
  * qla2x00_process_response_queue() - Process response queue entries.
  * @ha: SCSI driver HA context
@@ -1942,10 +1909,6 @@ void qla24xx_process_response_queue(struct scsi_qla_host *vha,
 			qla24xx_tm_iocb_entry(vha, rsp->req,
 			    (struct tsk_mgmt_entry *)pkt);
 			break;
-		case MARKER_TYPE:
-			qla24xx_marker_iocb_entry(vha, rsp->req,
-			    (struct mrk_entry_24xx *)pkt);
-			break;
                 case CT_IOCB_TYPE:
 			qla24xx_els_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
 			clear_bit(MBX_INTERRUPT, &vha->hw->mbx_cmd_flags);
-- 
cgit v1.2.3


From 5544213be7b4fb693730106a6d70a8cc1aa7cdf6 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Fri, 23 Jul 2010 15:28:27 +0500
Subject: [SCSI] qla2xxx: Correct extended sense-data handling.

Earlier implementation did not take into account the varying
sizes of data buffers returned from structures sts_entry_t and
sts_entry_24xx.  Sense-data after the 20th byte could be
incorrect.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ba971ac1c4e8..88b5774085ad 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1320,8 +1320,9 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 }
 
 static inline void
-qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
-	struct rsp_que *rsp)
+
+qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t par_sense_len,
+    uint32_t sense_len, struct rsp_que *rsp)
 {
 	struct scsi_cmnd *cp = sp->cmd;
 
@@ -1330,8 +1331,8 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
 
 	sp->request_sense_length = sense_len;
 	sp->request_sense_ptr = cp->sense_buffer;
-	if (sp->request_sense_length > 32)
-		sense_len = 32;
+	if (sp->request_sense_length > par_sense_len)
+		sense_len = par_sense_len;
 
 	memcpy(cp->sense_buffer, sense_data, sense_len);
 
@@ -1438,7 +1439,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	uint16_t	ox_id;
 	uint8_t		lscsi_status;
 	int32_t		resid;
-	uint32_t	sense_len, rsp_info_len, resid_len, fw_resid_len;
+	uint32_t sense_len, par_sense_len, rsp_info_len, resid_len,
+	    fw_resid_len;
 	uint8_t		*rsp_info, *sense_data;
 	struct qla_hw_data *ha = vha->hw;
 	uint32_t handle;
@@ -1496,7 +1498,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 	fcport = sp->fcport;
 
 	ox_id = 0;
-	sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
+	sense_len = par_sense_len = rsp_info_len = resid_len =
+	    fw_resid_len = 0;
 	if (IS_FWI2_CAPABLE(ha)) {
 		if (scsi_status & SS_SENSE_LEN_VALID)
 			sense_len = le32_to_cpu(sts24->sense_len);
@@ -1510,6 +1513,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		sense_data = sts24->data;
 		host_to_fcp_swap(sts24->data, sizeof(sts24->data));
 		ox_id = le16_to_cpu(sts24->ox_id);
+		par_sense_len = sizeof(sts24->data);
 	} else {
 		if (scsi_status & SS_SENSE_LEN_VALID)
 			sense_len = le16_to_cpu(sts->req_sense_length);
@@ -1518,13 +1522,16 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		resid_len = le32_to_cpu(sts->residual_length);
 		rsp_info = sts->rsp_info;
 		sense_data = sts->req_sense_data;
+		par_sense_len = sizeof(sts->req_sense_data);
 	}
 
 	/* Check for any FCP transport errors. */
 	if (scsi_status & SS_RESPONSE_INFO_LEN_VALID) {
 		/* Sense data lies beyond any FCP RESPONSE data. */
-		if (IS_FWI2_CAPABLE(ha))
+		if (IS_FWI2_CAPABLE(ha)) {
 			sense_data += rsp_info_len;
+			par_sense_len -= rsp_info_len;
+		}
 		if (rsp_info_len > 3 && rsp_info[3]) {
 			DEBUG2(qla_printk(KERN_INFO, ha,
 			    "scsi(%ld:%d:%d): FCP I/O protocol failure "
@@ -1584,7 +1591,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		if (!(scsi_status & SS_SENSE_LEN_VALID))
 			break;
 
-		qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
+		qla2x00_handle_sense(sp, sense_data, par_sense_len, sense_len,
+		    rsp);
 		break;
 
 	case CS_DATA_UNDERRUN:
@@ -1648,7 +1656,8 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 			if (!(scsi_status & SS_SENSE_LEN_VALID))
 				break;
 
-			qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
+			qla2x00_handle_sense(sp, sense_data, par_sense_len,
+			    sense_len, rsp);
 		}
 		break;
 
-- 
cgit v1.2.3


From 03c3f563c55121292022a6e8e213ea54c20a5980 Mon Sep 17 00:00:00 2001
From: Duane Grigsby <duane.grigsby@qlogic.com>
Date: Fri, 23 Jul 2010 15:28:28 +0500
Subject: [SCSI] qla2xxx: Propogate transport disrupted status for cable pull
 conditions for faster failover.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 88b5774085ad..ffc855f7697d 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1692,6 +1692,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 		break;
 
 	case CS_RESET:
+		cp->result = DID_TRANSPORT_DISRUPTED << 16;
+		break;
+
 	case CS_ABORTED:
 		cp->result = DID_RESET << 16;
 		break;
-- 
cgit v1.2.3


From 9bc4f4fb44d22e5edc9369c87585a3b492073b8b Mon Sep 17 00:00:00 2001
From: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Date: Fri, 23 Jul 2010 15:28:32 +0500
Subject: [SCSI] qla2xxx: Add CT passthru support for ISP23xx adapters

Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_bsg.c  |  9 -----
 drivers/scsi/qla2xxx/qla_iocb.c | 80 ++++++++++++++++++++++++++++++++++++++-
 drivers/scsi/qla2xxx/qla_isr.c  | 83 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 162 insertions(+), 10 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 518fccfbfdb2..04ead0620d5f 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -396,15 +396,6 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job)
 	char  *type = "FC_BSG_HST_CT";
 	struct srb_ctx *ct;
 
-	/* pass through is supported only for ISP 4Gb or higher */
-	if (!IS_FWI2_CAPABLE(ha)) {
-		DEBUG2(qla_printk(KERN_INFO, ha,
-		    "scsi(%ld):Firmware is not capable to support FC "
-		    "CT pass thru\n", vha->host_no));
-		rval = -EPERM;
-		goto done;
-	}
-
 	req_sg_cnt =
 		dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
 			bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 370646f7b3ff..e27d94713bdf 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1764,6 +1764,82 @@ qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb)
             (bsg_job->reply_payload.sg_list));
 }
 
+static void
+qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb)
+{
+	uint16_t        avail_dsds;
+	uint32_t        *cur_dsd;
+	struct scatterlist *sg;
+	int index;
+	uint16_t tot_dsds;
+	scsi_qla_host_t *vha = sp->fcport->vha;
+	struct qla_hw_data *ha = vha->hw;
+	struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job;
+	int loop_iterartion = 0;
+	int cont_iocb_prsnt = 0;
+	int entry_count = 1;
+
+	memset(ct_iocb, 0, sizeof(ms_iocb_entry_t));
+	ct_iocb->entry_type = CT_IOCB_TYPE;
+	ct_iocb->entry_status = 0;
+	ct_iocb->handle1 = sp->handle;
+	SET_TARGET_ID(ha, ct_iocb->loop_id, sp->fcport->loop_id);
+	ct_iocb->status = __constant_cpu_to_le16(0);
+	ct_iocb->control_flags = __constant_cpu_to_le16(0);
+	ct_iocb->timeout = 0;
+	ct_iocb->cmd_dsd_count =
+	    __constant_cpu_to_le16(bsg_job->request_payload.sg_cnt);
+	ct_iocb->total_dsd_count =
+	    __constant_cpu_to_le16(bsg_job->request_payload.sg_cnt + 1);
+	ct_iocb->req_bytecount =
+	    cpu_to_le32(bsg_job->request_payload.payload_len);
+	ct_iocb->rsp_bytecount =
+	    cpu_to_le32(bsg_job->reply_payload.payload_len);
+
+	ct_iocb->dseg_req_address[0] = cpu_to_le32(LSD(sg_dma_address
+	    (bsg_job->request_payload.sg_list)));
+	ct_iocb->dseg_req_address[1] = cpu_to_le32(MSD(sg_dma_address
+	    (bsg_job->request_payload.sg_list)));
+	ct_iocb->dseg_req_length = ct_iocb->req_bytecount;
+
+	ct_iocb->dseg_rsp_address[0] = cpu_to_le32(LSD(sg_dma_address
+	    (bsg_job->reply_payload.sg_list)));
+	ct_iocb->dseg_rsp_address[1] = cpu_to_le32(MSD(sg_dma_address
+	    (bsg_job->reply_payload.sg_list)));
+	ct_iocb->dseg_rsp_length = ct_iocb->rsp_bytecount;
+
+	avail_dsds = 1;
+	cur_dsd = (uint32_t *)ct_iocb->dseg_rsp_address;
+	index = 0;
+	tot_dsds = bsg_job->reply_payload.sg_cnt;
+
+	for_each_sg(bsg_job->reply_payload.sg_list, sg, tot_dsds, index) {
+		dma_addr_t       sle_dma;
+		cont_a64_entry_t *cont_pkt;
+
+		/* Allocate additional continuation packets? */
+		if (avail_dsds == 0) {
+			/*
+			* Five DSDs are available in the Cont.
+			* Type 1 IOCB.
+			       */
+			cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
+			cur_dsd = (uint32_t *) cont_pkt->dseg_0_address;
+			avail_dsds = 5;
+			cont_iocb_prsnt = 1;
+			entry_count++;
+		}
+
+		sle_dma = sg_dma_address(sg);
+		*cur_dsd++   = cpu_to_le32(LSD(sle_dma));
+		*cur_dsd++   = cpu_to_le32(MSD(sle_dma));
+		*cur_dsd++   = cpu_to_le32(sg_dma_len(sg));
+		loop_iterartion++;
+		avail_dsds--;
+	}
+	ct_iocb->entry_count = entry_count;
+}
+
 static void
 qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb)
 {
@@ -1867,7 +1943,9 @@ qla2x00_start_sp(srb_t *sp)
 		qla24xx_els_iocb(sp, pkt);
 		break;
 	case SRB_CT_CMD:
-		qla24xx_ct_iocb(sp, pkt);
+		IS_FWI2_CAPABLE(ha) ?
+		qla24xx_ct_iocb(sp, pkt) :
+		qla2x00_ct_iocb(sp, pkt);
 		break;
 	case SRB_ADISC_CMD:
 		IS_FWI2_CAPABLE(ha) ?
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index ffc855f7697d..518003328226 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -983,6 +983,86 @@ logio_done:
 	lio->done(sp);
 }
 
+static void
+qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
+    sts_entry_t *pkt, int iocb_type)
+{
+	const char func[] = "CT_IOCB";
+	const char *type;
+	struct qla_hw_data *ha = vha->hw;
+	srb_t *sp;
+	struct srb_ctx *sp_bsg;
+	struct fc_bsg_job *bsg_job;
+	uint16_t comp_status;
+
+	sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
+	if (!sp)
+		return;
+
+	sp_bsg = sp->ctx;
+	bsg_job = sp_bsg->u.bsg_job;
+
+	type = NULL;
+	switch (sp_bsg->type) {
+	case SRB_CT_CMD:
+		type = "ct pass-through";
+		break;
+	default:
+		qla_printk(KERN_WARNING, ha,
+		    "%s: Unrecognized SRB: (%p) type=%d.\n", func, sp,
+		    sp_bsg->type);
+		return;
+	}
+
+	comp_status = le16_to_cpu(pkt->comp_status);
+
+	/* return FC_CTELS_STATUS_OK and leave the decoding of the ELS/CT
+	 * fc payload  to the caller
+	 */
+	bsg_job->reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+
+	if (comp_status != CS_COMPLETE) {
+		if (comp_status == CS_DATA_UNDERRUN) {
+			bsg_job->reply->result = DID_OK << 16;
+			bsg_job->reply->reply_payload_rcv_len =
+			    le16_to_cpu(((sts_entry_t *)pkt)->rsp_info_len);
+
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			    "scsi(%ld): CT pass-through-%s error "
+			    "comp_status-status=0x%x total_byte = 0x%x.\n",
+			    vha->host_no, type, comp_status,
+			    bsg_job->reply->reply_payload_rcv_len));
+		} else {
+			DEBUG2(qla_printk(KERN_WARNING, ha,
+			    "scsi(%ld): CT pass-through-%s error "
+			    "comp_status-status=0x%x.\n",
+			    vha->host_no, type, comp_status));
+			bsg_job->reply->result = DID_ERROR << 16;
+			bsg_job->reply->reply_payload_rcv_len = 0;
+		}
+		DEBUG2(qla2x00_dump_buffer((uint8_t *)pkt, sizeof(*pkt)));
+	} else {
+		bsg_job->reply->result =  DID_OK << 16;;
+		bsg_job->reply->reply_payload_rcv_len =
+		    bsg_job->reply_payload.payload_len;
+		bsg_job->reply_len = 0;
+	}
+
+	dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE);
+
+	dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list,
+	    bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+	if (sp_bsg->type == SRB_ELS_CMD_HST || sp_bsg->type == SRB_CT_CMD)
+		kfree(sp->fcport);
+
+	kfree(sp->ctx);
+	mempool_free(sp, ha->srb_mempool);
+	bsg_job->job_done(bsg_job);
+}
+
 static void
 qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req,
     struct sts_entry_24xx *pkt, int iocb_type)
@@ -1303,6 +1383,9 @@ qla2x00_process_response_queue(struct rsp_que *rsp)
 			qla2x00_mbx_iocb_entry(vha, rsp->req,
 			    (struct mbx_entry *)pkt);
 			break;
+		case CT_IOCB_TYPE:
+			qla2x00_ct_entry(vha, rsp->req, pkt, CT_IOCB_TYPE);
+			break;
 		default:
 			/* Type Not Supported. */
 			DEBUG4(printk(KERN_WARNING
-- 
cgit v1.2.3


From de7c5d059dbd245ad80011725f9c86f560e61fff Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Fri, 23 Jul 2010 15:28:36 +0500
Subject: [SCSI] qla2xxx: Update copyright banner.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_attr.c     | 2 +-
 drivers/scsi/qla2xxx/qla_bsg.c      | 2 +-
 drivers/scsi/qla2xxx/qla_bsg.h      | 2 +-
 drivers/scsi/qla2xxx/qla_dbg.c      | 2 +-
 drivers/scsi/qla2xxx/qla_dbg.h      | 2 +-
 drivers/scsi/qla2xxx/qla_def.h      | 2 +-
 drivers/scsi/qla2xxx/qla_dfs.c      | 2 +-
 drivers/scsi/qla2xxx/qla_fw.h       | 2 +-
 drivers/scsi/qla2xxx/qla_gbl.h      | 2 +-
 drivers/scsi/qla2xxx/qla_gs.c       | 2 +-
 drivers/scsi/qla2xxx/qla_init.c     | 2 +-
 drivers/scsi/qla2xxx/qla_inline.h   | 2 +-
 drivers/scsi/qla2xxx/qla_iocb.c     | 2 +-
 drivers/scsi/qla2xxx/qla_isr.c      | 2 +-
 drivers/scsi/qla2xxx/qla_mbx.c      | 2 +-
 drivers/scsi/qla2xxx/qla_mid.c      | 2 +-
 drivers/scsi/qla2xxx/qla_nx.c       | 2 +-
 drivers/scsi/qla2xxx/qla_nx.h       | 2 +-
 drivers/scsi/qla2xxx/qla_os.c       | 2 +-
 drivers/scsi/qla2xxx/qla_settings.h | 2 +-
 drivers/scsi/qla2xxx/qla_sup.c      | 2 +-
 drivers/scsi/qla2xxx/qla_version.h  | 2 +-
 22 files changed, 22 insertions(+), 22 deletions(-)

(limited to 'drivers/scsi/qla2xxx/qla_isr.c')

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 93a4c20e2113..d9b431d061b2 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 6b863f789c4d..9067629817ea 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h
index 1f096dabc015..cc7c52f87a11 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.h
+++ b/drivers/scsi/qla2xxx/qla_bsg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2afc8a362f2c..096141148257 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 916c81f3f55d..6cfc28a25eb3 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 84e9c6b48ca3..3a432ea0c7a3 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c
index 3a9a6ca42266..6271353e8c51 100644
--- a/drivers/scsi/qla2xxx/qla_dfs.c
+++ b/drivers/scsi/qla2xxx/qla_dfs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 93f833960147..631fefc8482d 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 4688ad2a559e..b7d940fcbc1b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 2fabae8daec4..4c083928c2fb 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9b58a79c4ae5..1b7d80b20986 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 84c2fea154d2..48f97a92e33d 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index e27d94713bdf..c9c709e0f1a2 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 518003328226..6982ba70e12a 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 02a4d355db3c..6009b0c69488 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index d1618b4a5e50..642cd79bd030 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 4299df2e082c..915b77a6e193 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 420e0773e743..569232b45502 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 86d352ab9c58..50f685415fb2 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index 2801c2664b40..f0b2b9986a55 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index df288dc829e0..76de9574b385 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 9b49b0862747..e75ccb91317d 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
-- 
cgit v1.2.3