From 0527eb372301bfd9b84160adb6c132b443ae3013 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 2 May 2017 19:35:37 +0530 Subject: pwm: tegra: Set maximum pwm clock source per SoC tapeout The PWM hardware IP is taped-out with different maximum frequency on different SoCs. From HW team: Before Tegra186, it is 48 MHz. In Tegra186, it is 102 MHz. Add support to limit the clock source frequency to the maximum IP supported frequency. Provide these values via SoC chipdata. Signed-off-by: Laxman Dewangan Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- drivers/pwm/pwm-tegra.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c index 8c6ed556db28..e9b33f09ff09 100644 --- a/drivers/pwm/pwm-tegra.c +++ b/drivers/pwm/pwm-tegra.c @@ -41,6 +41,9 @@ struct tegra_pwm_soc { unsigned int num_channels; + + /* Maximum IP frequency for given SoCs */ + unsigned long max_frequency; }; struct tegra_pwm_chip { @@ -201,7 +204,18 @@ static int tegra_pwm_probe(struct platform_device *pdev) if (IS_ERR(pwm->clk)) return PTR_ERR(pwm->clk); - /* Read PWM clock rate from source */ + /* Set maximum frequency of the IP */ + ret = clk_set_rate(pwm->clk, pwm->soc->max_frequency); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to set max frequency: %d\n", ret); + return ret; + } + + /* + * The requested and configured frequency may differ due to + * clock register resolutions. Get the configured frequency + * so that PWM period can be calculated more accurately. + */ pwm->clk_rate = clk_get_rate(pwm->clk); pwm->rst = devm_reset_control_get(&pdev->dev, "pwm"); @@ -273,10 +287,12 @@ static int tegra_pwm_resume(struct device *dev) static const struct tegra_pwm_soc tegra20_pwm_soc = { .num_channels = 4, + .max_frequency = 48000000UL, }; static const struct tegra_pwm_soc tegra186_pwm_soc = { .num_channels = 1, + .max_frequency = 102000000UL, }; static const struct of_device_id tegra_pwm_of_match[] = { -- cgit v1.2.3 From 0e1921dcd825004551bd4dd2df99697641434a52 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 16 May 2017 11:40:09 +0200 Subject: pwm: bfin: Remove unneeded error message Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring Signed-off-by: Thierry Reding --- drivers/pwm/pwm-bfin.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c index d2ed0a2a18e8..a9a88137f2cb 100644 --- a/drivers/pwm/pwm-bfin.c +++ b/drivers/pwm/pwm-bfin.c @@ -118,10 +118,8 @@ static int bfin_pwm_probe(struct platform_device *pdev) int ret; pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); - if (!pwm) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!pwm) return -ENOMEM; - } platform_set_drvdata(pdev, pwm); -- cgit v1.2.3 From c034a6fda0179a85cd571c386ed6748188b0a79c Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 13 Jun 2017 15:26:41 +0530 Subject: pwm: hibvt: Constify hibvt_pwm_ops File size before: text data bss dec hex filename 1510 296 0 1806 70e drivers/pwm/pwm-hibvt.o File size After adding 'const': text data bss dec hex filename 1606 192 0 1798 706 drivers/pwm/pwm-hibvt.o Signed-off-by: Arvind Yadav Signed-off-by: Thierry Reding --- drivers/pwm/pwm-hibvt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c index d0e8f8542626..8dadc58d6cdf 100644 --- a/drivers/pwm/pwm-hibvt.c +++ b/drivers/pwm/pwm-hibvt.c @@ -165,7 +165,7 @@ static int hibvt_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } -static struct pwm_ops hibvt_pwm_ops = { +static const struct pwm_ops hibvt_pwm_ops = { .get_state = hibvt_pwm_get_state, .apply = hibvt_pwm_apply, -- cgit v1.2.3 From 93e0dfb2c52f9cb7a7899156475b4e7b0bee7de3 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 30 May 2017 21:32:07 +0200 Subject: pwm: sun4i: Improve hardware read out Implement .get_state instead of only reading the polarity at probe time. This allows to get the proper state, period and duty cycle. Signed-off-by: Alexandre Belloni Reviewed-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sun4i.c | 65 ++++++++++++++++++++++++++++++++++--------------- 1 file changed, 46 insertions(+), 19 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index 1284ffa05921..175a69245a8a 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -44,6 +44,10 @@ #define PWM_DTY_MASK GENMASK(15, 0) +#define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1) +#define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK) +#define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK) + #define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) static const u32 prescaler_table[] = { @@ -96,6 +100,46 @@ static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip, writel(val, chip->base + offset); } +static void sun4i_pwm_get_state(struct pwm_chip *chip, + struct pwm_device *pwm, + struct pwm_state *state) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + u64 clk_rate, tmp; + u32 val; + unsigned int prescaler; + + clk_rate = clk_get_rate(sun4i_pwm->clk); + + val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + + if ((val == PWM_PRESCAL_MASK) && sun4i_pwm->data->has_prescaler_bypass) + prescaler = 1; + else + prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)]; + + if (prescaler == 0) + return; + + if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm)) + state->polarity = PWM_POLARITY_NORMAL; + else + state->polarity = PWM_POLARITY_INVERSED; + + if (val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) + state->enabled = true; + else + state->enabled = false; + + val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm)); + + tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val); + state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); + + tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val); + state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); +} + static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { @@ -257,6 +301,7 @@ static const struct pwm_ops sun4i_pwm_ops = { .set_polarity = sun4i_pwm_set_polarity, .enable = sun4i_pwm_enable, .disable = sun4i_pwm_disable, + .get_state = sun4i_pwm_get_state, .owner = THIS_MODULE, }; @@ -316,8 +361,7 @@ static int sun4i_pwm_probe(struct platform_device *pdev) { struct sun4i_pwm_chip *pwm; struct resource *res; - u32 val; - int i, ret; + int ret; const struct of_device_id *match; match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev); @@ -353,24 +397,7 @@ static int sun4i_pwm_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pwm); - ret = clk_prepare_enable(pwm->clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable PWM clock\n"); - goto clk_error; - } - - val = sun4i_pwm_readl(pwm, PWM_CTRL_REG); - for (i = 0; i < pwm->chip.npwm; i++) - if (!(val & BIT_CH(PWM_ACT_STATE, i))) - pwm_set_polarity(&pwm->chip.pwms[i], - PWM_POLARITY_INVERSED); - clk_disable_unprepare(pwm->clk); - return 0; - -clk_error: - pwmchip_remove(&pwm->chip); - return ret; } static int sun4i_pwm_remove(struct platform_device *pdev) -- cgit v1.2.3 From c32c5c50d4fe156da1ecd32f2a16c1b8fcfba392 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 30 May 2017 21:32:08 +0200 Subject: pwm: sun4i: Switch to atomic PWM Switch the driver to atomic PWM. This makes it easier to wait a proper amount of time when changing the duty cycle before disabling the channel (main use case is switching the duty cycle to 0 before disabling). Signed-off-by: Alexandre Belloni Acked-by: Maxime Ripard Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sun4i.c | 166 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index 175a69245a8a..cd8737d0804f 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -8,8 +8,10 @@ #include #include +#include #include #include +#include #include #include #include @@ -81,6 +83,8 @@ struct sun4i_pwm_chip { void __iomem *base; spinlock_t ctrl_lock; const struct sun4i_pwm_data *data; + unsigned long next_period[2]; + bool needs_delay[2]; }; static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) @@ -140,6 +144,167 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip, state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate); } +static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm, + struct pwm_state *state, + u32 *dty, u32 *prd, unsigned int *prsclr) +{ + u64 clk_rate, div = 0; + unsigned int pval, prescaler = 0; + + clk_rate = clk_get_rate(sun4i_pwm->clk); + + if (sun4i_pwm->data->has_prescaler_bypass) { + /* First, test without any prescaler when available */ + prescaler = PWM_PRESCAL_MASK; + pval = 1; + /* + * When not using any prescaler, the clock period in nanoseconds + * is not an integer so round it half up instead of + * truncating to get less surprising values. + */ + div = clk_rate * state->period + NSEC_PER_SEC / 2; + do_div(div, NSEC_PER_SEC); + if (div - 1 > PWM_PRD_MASK) + prescaler = 0; + } + + if (prescaler == 0) { + /* Go up from the first divider */ + for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { + if (!prescaler_table[prescaler]) + continue; + pval = prescaler_table[prescaler]; + div = clk_rate; + do_div(div, pval); + div = div * state->period; + do_div(div, NSEC_PER_SEC); + if (div - 1 <= PWM_PRD_MASK) + break; + } + + if (div - 1 > PWM_PRD_MASK) + return -EINVAL; + } + + *prd = div; + div *= state->duty_cycle; + do_div(div, state->period); + *dty = div; + *prsclr = prescaler; + + div = (u64)pval * NSEC_PER_SEC * *prd; + state->period = DIV_ROUND_CLOSEST_ULL(div, clk_rate); + + div = (u64)pval * NSEC_PER_SEC * *dty; + state->duty_cycle = DIV_ROUND_CLOSEST_ULL(div, clk_rate); + + return 0; +} + +static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, + struct pwm_state *state) +{ + struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); + struct pwm_state cstate; + u32 ctrl; + int ret; + unsigned int delay_us; + unsigned long now; + + pwm_get_state(pwm, &cstate); + + if (!cstate.enabled) { + ret = clk_prepare_enable(sun4i_pwm->clk); + if (ret) { + dev_err(chip->dev, "failed to enable PWM clock\n"); + return ret; + } + } + + spin_lock(&sun4i_pwm->ctrl_lock); + ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + + if ((cstate.period != state->period) || + (cstate.duty_cycle != state->duty_cycle)) { + u32 period, duty, val; + unsigned int prescaler; + + ret = sun4i_pwm_calculate(sun4i_pwm, state, + &duty, &period, &prescaler); + if (ret) { + dev_err(chip->dev, "period exceeds the maximum value\n"); + spin_unlock(&sun4i_pwm->ctrl_lock); + if (!cstate.enabled) + clk_disable_unprepare(sun4i_pwm->clk); + return ret; + } + + if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) { + /* Prescaler changed, the clock has to be gated */ + ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); + + ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); + ctrl |= BIT_CH(prescaler, pwm->hwpwm); + } + + val = (duty & PWM_DTY_MASK) | PWM_PRD(period); + sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); + sun4i_pwm->next_period[pwm->hwpwm] = jiffies + + usecs_to_jiffies(cstate.period / 1000 + 1); + sun4i_pwm->needs_delay[pwm->hwpwm] = true; + } + + if (state->polarity != PWM_POLARITY_NORMAL) + ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); + else + ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); + + ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + if (state->enabled) { + ctrl |= BIT_CH(PWM_EN, pwm->hwpwm); + } else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) { + ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm); + ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + } + + sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); + + spin_unlock(&sun4i_pwm->ctrl_lock); + + if (state->enabled) + return 0; + + if (!sun4i_pwm->needs_delay[pwm->hwpwm]) { + clk_disable_unprepare(sun4i_pwm->clk); + return 0; + } + + /* We need a full period to elapse before disabling the channel. */ + now = jiffies; + if (sun4i_pwm->needs_delay[pwm->hwpwm] && + time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) { + delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] - + now); + if ((delay_us / 500) > MAX_UDELAY_MS) + msleep(delay_us / 1000 + 1); + else + usleep_range(delay_us, delay_us * 2); + } + sun4i_pwm->needs_delay[pwm->hwpwm] = false; + + spin_lock(&sun4i_pwm->ctrl_lock); + ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); + ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); + ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm); + sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG); + spin_unlock(&sun4i_pwm->ctrl_lock); + + clk_disable_unprepare(sun4i_pwm->clk); + + return 0; +} + static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { @@ -301,6 +466,7 @@ static const struct pwm_ops sun4i_pwm_ops = { .set_polarity = sun4i_pwm_set_polarity, .enable = sun4i_pwm_enable, .disable = sun4i_pwm_disable, + .apply = sun4i_pwm_apply, .get_state = sun4i_pwm_get_state, .owner = THIS_MODULE, }; -- cgit v1.2.3 From a054c4d68408cdbb260ba9384415fb53edb29d7a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 30 May 2017 21:32:09 +0200 Subject: pwm: sun4i: Drop legacy callbacks Remove the legacy callbacks .enable(), .disable(), .set_polarity() and .config(). Signed-off-by: Alexandre Belloni Acked-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sun4i.c | 160 ------------------------------------------------ 1 file changed, 160 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index cd8737d0804f..6d23f1d1c9b7 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -305,167 +305,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, return 0; } -static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, - int duty_ns, int period_ns) -{ - struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); - u32 prd, dty, val, clk_gate; - u64 clk_rate, div = 0; - unsigned int prescaler = 0; - int err; - - clk_rate = clk_get_rate(sun4i_pwm->clk); - - if (sun4i_pwm->data->has_prescaler_bypass) { - /* First, test without any prescaler when available */ - prescaler = PWM_PRESCAL_MASK; - /* - * When not using any prescaler, the clock period in nanoseconds - * is not an integer so round it half up instead of - * truncating to get less surprising values. - */ - div = clk_rate * period_ns + NSEC_PER_SEC / 2; - do_div(div, NSEC_PER_SEC); - if (div - 1 > PWM_PRD_MASK) - prescaler = 0; - } - - if (prescaler == 0) { - /* Go up from the first divider */ - for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { - if (!prescaler_table[prescaler]) - continue; - div = clk_rate; - do_div(div, prescaler_table[prescaler]); - div = div * period_ns; - do_div(div, NSEC_PER_SEC); - if (div - 1 <= PWM_PRD_MASK) - break; - } - - if (div - 1 > PWM_PRD_MASK) { - dev_err(chip->dev, "period exceeds the maximum value\n"); - return -EINVAL; - } - } - - prd = div; - div *= duty_ns; - do_div(div, period_ns); - dty = div; - - err = clk_prepare_enable(sun4i_pwm->clk); - if (err) { - dev_err(chip->dev, "failed to enable PWM clock\n"); - return err; - } - - spin_lock(&sun4i_pwm->ctrl_lock); - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - - if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) { - spin_unlock(&sun4i_pwm->ctrl_lock); - clk_disable_unprepare(sun4i_pwm->clk); - return -EBUSY; - } - - clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm); - if (clk_gate) { - val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - } - - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); - val |= BIT_CH(prescaler, pwm->hwpwm); - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - - val = (dty & PWM_DTY_MASK) | PWM_PRD(prd); - sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); - - if (clk_gate) { - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - val |= clk_gate; - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - } - - spin_unlock(&sun4i_pwm->ctrl_lock); - clk_disable_unprepare(sun4i_pwm->clk); - - return 0; -} - -static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, - enum pwm_polarity polarity) -{ - struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); - u32 val; - int ret; - - ret = clk_prepare_enable(sun4i_pwm->clk); - if (ret) { - dev_err(chip->dev, "failed to enable PWM clock\n"); - return ret; - } - - spin_lock(&sun4i_pwm->ctrl_lock); - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - - if (polarity != PWM_POLARITY_NORMAL) - val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); - else - val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); - - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - - spin_unlock(&sun4i_pwm->ctrl_lock); - clk_disable_unprepare(sun4i_pwm->clk); - - return 0; -} - -static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) -{ - struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); - u32 val; - int ret; - - ret = clk_prepare_enable(sun4i_pwm->clk); - if (ret) { - dev_err(chip->dev, "failed to enable PWM clock\n"); - return ret; - } - - spin_lock(&sun4i_pwm->ctrl_lock); - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - val |= BIT_CH(PWM_EN, pwm->hwpwm); - val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - spin_unlock(&sun4i_pwm->ctrl_lock); - - return 0; -} - -static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) -{ - struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); - u32 val; - - spin_lock(&sun4i_pwm->ctrl_lock); - val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); - val &= ~BIT_CH(PWM_EN, pwm->hwpwm); - val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); - sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); - spin_unlock(&sun4i_pwm->ctrl_lock); - - clk_disable_unprepare(sun4i_pwm->clk); -} - static const struct pwm_ops sun4i_pwm_ops = { - .config = sun4i_pwm_config, - .set_polarity = sun4i_pwm_set_polarity, - .enable = sun4i_pwm_enable, - .disable = sun4i_pwm_disable, .apply = sun4i_pwm_apply, .get_state = sun4i_pwm_get_state, .owner = THIS_MODULE, -- cgit v1.2.3 From d396b20a1e88ca2cabf7ec99c6c2138902aff1f3 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 8 Jun 2017 14:24:15 +0200 Subject: pwm: meson: Add compatible for the gxbb ao PWMs On the gxbb (and gxl) family, the PWMs of the AO domain require a specific compatible because the possible input clocks are different from the EE PWMs input clocks. Since the number of possible input clocks is also different, the 'num_parents' field is added to all the Meson PWM data. Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet Reviewed-by: Kevin Hilman Signed-off-by: Thierry Reding --- drivers/pwm/pwm-meson.c | 32 +++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 045ef9fa6fe3..defc27d880f3 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -103,6 +103,7 @@ struct meson_pwm_channel { struct meson_pwm_data { const char * const *parent_names; + unsigned int num_parents; }; struct meson_pwm { @@ -381,6 +382,7 @@ static const char * const pwm_meson8b_parent_names[] = { static const struct meson_pwm_data pwm_meson8b_data = { .parent_names = pwm_meson8b_parent_names, + .num_parents = ARRAY_SIZE(pwm_meson8b_parent_names), }; static const char * const pwm_gxbb_parent_names[] = { @@ -389,11 +391,35 @@ static const char * const pwm_gxbb_parent_names[] = { static const struct meson_pwm_data pwm_gxbb_data = { .parent_names = pwm_gxbb_parent_names, + .num_parents = ARRAY_SIZE(pwm_gxbb_parent_names), +}; + +/* + * Only the 2 first inputs of the GXBB AO PWMs are valid + * The last 2 are grounded + */ +static const char * const pwm_gxbb_ao_parent_names[] = { + "xtal", "clk81" +}; + +static const struct meson_pwm_data pwm_gxbb_ao_data = { + .parent_names = pwm_gxbb_ao_parent_names, + .num_parents = ARRAY_SIZE(pwm_gxbb_ao_parent_names), }; static const struct of_device_id meson_pwm_matches[] = { - { .compatible = "amlogic,meson8b-pwm", .data = &pwm_meson8b_data }, - { .compatible = "amlogic,meson-gxbb-pwm", .data = &pwm_gxbb_data }, + { + .compatible = "amlogic,meson8b-pwm", + .data = &pwm_meson8b_data + }, + { + .compatible = "amlogic,meson-gxbb-pwm", + .data = &pwm_gxbb_data + }, + { + .compatible = "amlogic,meson-gxbb-ao-pwm", + .data = &pwm_gxbb_ao_data + }, {}, }; MODULE_DEVICE_TABLE(of, meson_pwm_matches); @@ -417,7 +443,7 @@ static int meson_pwm_init_channels(struct meson_pwm *meson, init.ops = &clk_mux_ops; init.flags = CLK_IS_BASIC; init.parent_names = meson->data->parent_names; - init.num_parents = 1 << MISC_CLK_SEL_WIDTH; + init.num_parents = meson->data->num_parents; channel->mux.reg = meson->base + REG_MISC_AB; channel->mux.shift = mux_reg_shifts[i]; -- cgit v1.2.3 From fd7b2be8cbcf6cd6d9c9e843ffff36fb91388e51 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 8 Jun 2017 14:24:16 +0200 Subject: pwm: meson: Improve PWM calculation precision When using input clocks with high rates, such as clk81 (166MHz), the fin_ns = NSEC_PER_SEC / fin_freq can introduce a significant error. Ex: fin_freq = 166666667, NSEC_PER_SEC = 1000000000 fin_ns = 5,9999999 which is, of course, rounded down to 5. This introduces an error of ~20% on the period requested from the PWM. This patch uses ps instead of ns (and 64 bit integers) to perform the calculation. This should give a good enough precision. Fixes: 211ed630753d ("pwm: Add support for Meson PWM Controller") Signed-off-by: Jerome Brunet Acked-by: Neil Armstrong Signed-off-by: Thierry Reding squash! pwm: meson: Improve pwm calculation precision --- drivers/pwm/pwm-meson.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index defc27d880f3..cb845edfe2b4 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -163,7 +163,8 @@ static int meson_pwm_calc(struct meson_pwm *meson, unsigned int duty, unsigned int period) { unsigned int pre_div, cnt, duty_cnt; - unsigned long fin_freq = -1, fin_ns; + unsigned long fin_freq = -1; + u64 fin_ps; if (~(meson->inverter_mask >> id) & 0x1) duty = period - duty; @@ -179,13 +180,15 @@ static int meson_pwm_calc(struct meson_pwm *meson, } dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq); - fin_ns = NSEC_PER_SEC / fin_freq; + fin_ps = (u64)NSEC_PER_SEC * 1000; + do_div(fin_ps, fin_freq); /* Calc pre_div with the period */ for (pre_div = 0; pre_div < MISC_CLK_DIV_MASK; pre_div++) { - cnt = DIV_ROUND_CLOSEST(period, fin_ns * (pre_div + 1)); - dev_dbg(meson->chip.dev, "fin_ns=%lu pre_div=%u cnt=%u\n", - fin_ns, pre_div, cnt); + cnt = DIV_ROUND_CLOSEST_ULL((u64)period * 1000, + fin_ps * (pre_div + 1)); + dev_dbg(meson->chip.dev, "fin_ps=%llu pre_div=%u cnt=%u\n", + fin_ps, pre_div, cnt); if (cnt <= 0xffff) break; } @@ -208,7 +211,8 @@ static int meson_pwm_calc(struct meson_pwm *meson, channel->lo = cnt; } else { /* Then check is we can have the duty with the same pre_div */ - duty_cnt = DIV_ROUND_CLOSEST(duty, fin_ns * (pre_div + 1)); + duty_cnt = DIV_ROUND_CLOSEST_ULL((u64)duty * 1000, + fin_ps * (pre_div + 1)); if (duty_cnt > 0xffff) { dev_err(meson->chip.dev, "unable to get duty cycle\n"); return -EINVAL; -- cgit v1.2.3 From e47866a177cf0baba1d714fa93cb762f25bd6cef Mon Sep 17 00:00:00 2001 From: Nick Vaccaro Date: Fri, 23 Jun 2017 14:52:47 -0700 Subject: pwm: cros-ec: Fix transposed param settings The __cros_ec_pwm_get_duty() routine was transposing the insize and outsize fields when calling cros_ec_cmd_xfer_status(). The original code worked without error due to size of the two particular parameter blocks passed to cros_ec_cmd_xfer_status(), so this change is not fixing an actual runtime problem, just correcting the calling usage. Signed-off-by: Nick Vaccaro Reviewed-by: Brian Norris Signed-off-by: Thierry Reding --- drivers/pwm/pwm-cros-ec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pwm') diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c index f6ca4e8c6253..9c13694eaa24 100644 --- a/drivers/pwm/pwm-cros-ec.c +++ b/drivers/pwm/pwm-cros-ec.c @@ -75,8 +75,8 @@ static int __cros_ec_pwm_get_duty(struct cros_ec_device *ec, u8 index, msg->version = 0; msg->command = EC_CMD_PWM_GET_DUTY; - msg->insize = sizeof(*params); - msg->outsize = sizeof(*resp); + msg->insize = sizeof(*resp); + msg->outsize = sizeof(*params); params->pwm_type = EC_PWM_TYPE_GENERIC; params->index = index; -- cgit v1.2.3