From 200c0a3e404beab02be83e5cbf111d26b9f6ce22 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Thu, 20 Feb 2014 06:02:35 +1000 Subject: Power: Reset: Generalize qnap-poweroff to work on Synology devices. The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this. Signed-off-by: Ben Peddell Signed-off-by: Andrew Lunn Acked-by: Jason Cooper Cc: Anton Vorontsov Cc: Dmitry Eremin-Solenikov Cc: David Woodhouse Signed-off-by: Jason Cooper --- drivers/power/reset/qnap-poweroff.c | 49 ++++++++++++++++++++++++++++--------- 1 file changed, 37 insertions(+), 12 deletions(-) (limited to 'drivers/power') diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c index 37f56f7ee926..a75db7f8a92f 100644 --- a/drivers/power/reset/qnap-poweroff.c +++ b/drivers/power/reset/qnap-poweroff.c @@ -1,5 +1,5 @@ /* - * QNAP Turbo NAS Board power off + * QNAP Turbo NAS Board power off. Can also be used on Synology devices. * * Copyright (C) 2012 Andrew Lunn * @@ -25,17 +25,43 @@ #define UART1_REG(x) (base + ((UART_##x) << 2)) +struct power_off_cfg { + u32 baud; + char cmd; +}; + +static const struct power_off_cfg qnap_power_off_cfg = { + .baud = 19200, + .cmd = 'A', +}; + +static const struct power_off_cfg synology_power_off_cfg = { + .baud = 9600, + .cmd = '1', +}; + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible = "qnap,power-off", + .data = &qnap_power_off_cfg, + }, + { .compatible = "synology,power-off", + .data = &synology_power_off_cfg, + }, + {} +}; +MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); + static void __iomem *base; static unsigned long tclk; +static const struct power_off_cfg *cfg; static void qnap_power_off(void) { - /* 19200 baud divisor */ - const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200)); + const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud)); pr_err("%s: triggering power-off...\n", __func__); - /* hijack UART1 and reset into sane state (19200,8n1) */ + /* hijack UART1 and reset into sane state */ writel(0x83, UART1_REG(LCR)); writel(divisor & 0xff, UART1_REG(DLL)); writel((divisor >> 8) & 0xff, UART1_REG(DLM)); @@ -44,16 +70,21 @@ static void qnap_power_off(void) writel(0x00, UART1_REG(FCR)); writel(0x00, UART1_REG(MCR)); - /* send the power-off command 'A' to PIC */ - writel('A', UART1_REG(TX)); + /* send the power-off command to PIC */ + writel(cfg->cmd, UART1_REG(TX)); } static int qnap_power_off_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct resource *res; struct clk *clk; char symname[KSYM_NAME_LEN]; + const struct of_device_id *match = + of_match_node(qnap_power_off_of_match_table, np); + cfg = match->data; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "Missing resource"); @@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id qnap_power_off_of_match_table[] = { - { .compatible = "qnap,power-off", }, - {} -}; -MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table); - static struct platform_driver qnap_power_off_driver = { .probe = qnap_power_off_probe, .remove = qnap_power_off_remove, -- cgit v1.2.3