From 152a810eae03f16e982444ffe3b0eca933a750cd Mon Sep 17 00:00:00 2001 From: Iskren Chernev <iskren.chernev@gmail.com> Date: Sat, 21 Aug 2021 18:56:56 +0300 Subject: phy: qcom-qmp: Add support for SM6115 UFS phy Add the tables and constants for init sequences for UFS QMP phy found in SM4250/6115 SoC. The phy is a variation of the v2 phy, but is mistakenly labeled as v3-660 in downstream sources. QSERDES COM, RX, TX registers match fully existing v2 registers, with a few additions. PCS registers don't have much in common, but there are no clashes with existing ones so new registers were added to existing v2 PCS pack. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210821155657.893165-3-iskren.chernev@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> --- drivers/phy/qualcomm/phy-qcom-qmp.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers/phy/qualcomm/phy-qcom-qmp.h') diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 6592b58b13f6..bebeac2c091c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -191,6 +191,8 @@ #define QSERDES_COM_VCO_TUNE2_MODE0 0x130 #define QSERDES_COM_VCO_TUNE1_MODE1 0x134 #define QSERDES_COM_VCO_TUNE2_MODE1 0x138 +#define QSERDES_COM_VCO_TUNE_INITVAL1 0x13c +#define QSERDES_COM_VCO_TUNE_INITVAL2 0x140 #define QSERDES_COM_VCO_TUNE_TIMER1 0x144 #define QSERDES_COM_VCO_TUNE_TIMER2 0x148 #define QSERDES_COM_BG_CTRL 0x170 @@ -220,6 +222,10 @@ /* Only for QMP V2 PHY - RX registers */ #define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 #define QSERDES_RX_UCDR_SO_GAIN 0x01c +#define QSERDES_RX_UCDR_SVS_SO_GAIN_HALF 0x030 +#define QSERDES_RX_UCDR_SVS_SO_GAIN_QUARTER 0x034 +#define QSERDES_RX_UCDR_SVS_SO_GAIN_EIGHTH 0x038 +#define QSERDES_RX_UCDR_SVS_SO_GAIN 0x03c #define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 #define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 #define QSERDES_RX_RX_TERM_BW 0x090 @@ -243,6 +249,10 @@ #define QPHY_POWER_DOWN_CONTROL 0x04 #define QPHY_TXDEEMPH_M6DB_V0 0x24 #define QPHY_TXDEEMPH_M3P5DB_V0 0x28 +#define QPHY_TX_LARGE_AMP_DRV_LVL 0x34 +#define QPHY_TX_LARGE_AMP_POST_EMP_LVL 0x38 +#define QPHY_TX_SMALL_AMP_DRV_LVL 0x3c +#define QPHY_TX_SMALL_AMP_POST_EMP_LVL 0x40 #define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 #define QPHY_RX_IDLE_DTCT_CNTRL 0x58 #define QPHY_POWER_STATE_CONFIG1 0x60 @@ -253,6 +263,11 @@ #define QPHY_LOCK_DETECT_CONFIG3 0x88 #define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 #define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 +#define QPHY_RX_MIN_STALL_NOCONFIG_TIME_CAP 0xcc +#define QPHY_RX_SYM_RESYNC_CTRL 0x13c +#define QPHY_RX_MIN_HIBERN8_TIME 0x140 +#define QPHY_RX_SIGDET_CTRL2 0x148 +#define QPHY_RX_PWM_GEAR_BAND 0x154 #define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 #define QPHY_OSC_DTCT_ACTIONS 0x1AC #define QPHY_RX_SIGDET_LVL 0x1D8 @@ -280,6 +295,8 @@ #define QSERDES_V3_COM_SSC_PER2 0x020 #define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 #define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 +#define QSERDES_V3_COM_POST_DIV 0x02c +#define QSERDES_V3_COM_POST_DIV_MUX 0x030 #define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 # define QSERDES_V3_COM_BIAS_EN 0x0001 # define QSERDES_V3_COM_BIAS_EN_MUX 0x0002 @@ -291,6 +308,7 @@ #define QSERDES_V3_COM_CLK_ENABLE1 0x038 #define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c #define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 +#define QSERDES_V3_COM_PLL_EN 0x044 #define QSERDES_V3_COM_PLL_IVCO 0x048 #define QSERDES_V3_COM_LOCK_CMP1_MODE0 0x098 #define QSERDES_V3_COM_LOCK_CMP2_MODE0 0x09c -- cgit v1.2.3