From 3749c51ac6c1560aa1cb1520066bed84c6f8152a Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 13 Dec 2009 08:11:32 -0500 Subject: PCI: Make current and maximum bus speeds part of the PCI core Move the max_bus_speed and cur_bus_speed into the pci_bus. Expose the values through the PCI slot driver instead of the hotplug slot driver. Update all the hotplug drivers to use the pci_bus instead of their own data structures. Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/shpchp_hpc.c | 149 ++++++++++++++++++++------------------- 1 file changed, 77 insertions(+), 72 deletions(-) (limited to 'drivers/pci/hotplug/shpchp_hpc.c') diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c index 86dc39847769..5f5e8d2e3552 100644 --- a/drivers/pci/hotplug/shpchp_hpc.c +++ b/drivers/pci/hotplug/shpchp_hpc.c @@ -660,6 +660,75 @@ static int hpc_slot_disable(struct slot * slot) return retval; } +static int shpc_get_cur_bus_speed(struct controller *ctrl) +{ + int retval = 0; + struct pci_bus *bus = ctrl->pci_dev->subordinate; + enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; + u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); + u8 pi = shpc_readb(ctrl, PROG_INTERFACE); + u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); + + if ((pi == 1) && (speed_mode > 4)) { + retval = -ENODEV; + goto out; + } + + switch (speed_mode) { + case 0x0: + bus_speed = PCI_SPEED_33MHz; + break; + case 0x1: + bus_speed = PCI_SPEED_66MHz; + break; + case 0x2: + bus_speed = PCI_SPEED_66MHz_PCIX; + break; + case 0x3: + bus_speed = PCI_SPEED_100MHz_PCIX; + break; + case 0x4: + bus_speed = PCI_SPEED_133MHz_PCIX; + break; + case 0x5: + bus_speed = PCI_SPEED_66MHz_PCIX_ECC; + break; + case 0x6: + bus_speed = PCI_SPEED_100MHz_PCIX_ECC; + break; + case 0x7: + bus_speed = PCI_SPEED_133MHz_PCIX_ECC; + break; + case 0x8: + bus_speed = PCI_SPEED_66MHz_PCIX_266; + break; + case 0x9: + bus_speed = PCI_SPEED_100MHz_PCIX_266; + break; + case 0xa: + bus_speed = PCI_SPEED_133MHz_PCIX_266; + break; + case 0xb: + bus_speed = PCI_SPEED_66MHz_PCIX_533; + break; + case 0xc: + bus_speed = PCI_SPEED_100MHz_PCIX_533; + break; + case 0xd: + bus_speed = PCI_SPEED_133MHz_PCIX_533; + break; + default: + retval = -ENODEV; + break; + } + + out: + bus->cur_bus_speed = bus_speed; + dbg("Current bus speed = %d\n", bus_speed); + return retval; +} + + static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) { int retval; @@ -720,6 +789,8 @@ static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value) retval = shpc_write_cmd(slot, 0, cmd); if (retval) ctrl_err(ctrl, "%s: Write command failed!\n", __func__); + else + shpc_get_cur_bus_speed(ctrl); return retval; } @@ -803,10 +874,10 @@ static irqreturn_t shpc_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) +static int shpc_get_max_bus_speed(struct controller *ctrl) { int retval = 0; - struct controller *ctrl = slot->ctrl; + struct pci_bus *bus = ctrl->pci_dev->subordinate; enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; u8 pi = shpc_readb(ctrl, PROG_INTERFACE); u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); @@ -842,79 +913,12 @@ static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value) retval = -ENODEV; } - *value = bus_speed; + bus->max_bus_speed = bus_speed; ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); return retval; } -static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value) -{ - int retval = 0; - struct controller *ctrl = slot->ctrl; - enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; - u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); - u8 pi = shpc_readb(ctrl, PROG_INTERFACE); - u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); - - if ((pi == 1) && (speed_mode > 4)) { - *value = PCI_SPEED_UNKNOWN; - return -ENODEV; - } - - switch (speed_mode) { - case 0x0: - *value = PCI_SPEED_33MHz; - break; - case 0x1: - *value = PCI_SPEED_66MHz; - break; - case 0x2: - *value = PCI_SPEED_66MHz_PCIX; - break; - case 0x3: - *value = PCI_SPEED_100MHz_PCIX; - break; - case 0x4: - *value = PCI_SPEED_133MHz_PCIX; - break; - case 0x5: - *value = PCI_SPEED_66MHz_PCIX_ECC; - break; - case 0x6: - *value = PCI_SPEED_100MHz_PCIX_ECC; - break; - case 0x7: - *value = PCI_SPEED_133MHz_PCIX_ECC; - break; - case 0x8: - *value = PCI_SPEED_66MHz_PCIX_266; - break; - case 0x9: - *value = PCI_SPEED_100MHz_PCIX_266; - break; - case 0xa: - *value = PCI_SPEED_133MHz_PCIX_266; - break; - case 0xb: - *value = PCI_SPEED_66MHz_PCIX_533; - break; - case 0xc: - *value = PCI_SPEED_100MHz_PCIX_533; - break; - case 0xd: - *value = PCI_SPEED_133MHz_PCIX_533; - break; - default: - *value = PCI_SPEED_UNKNOWN; - retval = -ENODEV; - break; - } - - ctrl_dbg(ctrl, "Current bus speed = %d\n", bus_speed); - return retval; -} - static struct hpc_ops shpchp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .slot_enable = hpc_slot_enable, @@ -926,8 +930,6 @@ static struct hpc_ops shpchp_hpc_ops = { .get_latch_status = hpc_get_latch_status, .get_adapter_status = hpc_get_adapter_status, - .get_max_bus_speed = hpc_get_max_bus_speed, - .get_cur_bus_speed = hpc_get_cur_bus_speed, .get_adapter_speed = hpc_get_adapter_speed, .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, .get_prog_int = hpc_get_prog_int, @@ -1086,6 +1088,9 @@ int shpc_init(struct controller *ctrl, struct pci_dev *pdev) } ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); + shpc_get_max_bus_speed(ctrl); + shpc_get_cur_bus_speed(ctrl); + /* * If this is the first controller to be initialized, * initialize the shpchpd work queue -- cgit v1.2.3