From b4a8a51caf7de47c2fb03dfb1bbbe442661b5732 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Mon, 14 May 2018 16:09:48 +0100 Subject: PCI: dwc: Replace lower into upper case characters Replace of all initial lowercase character in comments and debug messages to uppercase to maintain coherence. Fix messages coherence within the DesignWare driver. Fix code style on dw_pcie_irq_domain_free() function. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Acked-by: Jingoo Han Acked-by: Joao Pinto --- drivers/pci/dwc/pcie-designware.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/pci/dwc/pcie-designware.c') diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c index 1b7282e5b494..778c4f76a884 100644 --- a/drivers/pci/dwc/pcie-designware.c +++ b/drivers/pci/dwc/pcie-designware.c @@ -69,7 +69,7 @@ u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, ret = dw_pcie_read(base + reg, size, &val); if (ret) - dev_err(pci->dev, "read DBI address failed\n"); + dev_err(pci->dev, "Read DBI address failed\n"); return val; } @@ -86,7 +86,7 @@ void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, ret = dw_pcie_write(base + reg, size, val); if (ret) - dev_err(pci->dev, "write DBI address failed\n"); + dev_err(pci->dev, "Write DBI address failed\n"); } static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg) @@ -137,7 +137,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); } - dev_err(pci->dev, "outbound iATU is not being enabled\n"); + dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, @@ -180,7 +180,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); } - dev_err(pci->dev, "outbound iATU is not being enabled\n"); + dev_err(pci->dev, "Outbound iATU is not being enabled\n"); } static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg) @@ -238,7 +238,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); } - dev_err(pci->dev, "inbound iATU is not being enabled\n"); + dev_err(pci->dev, "Inbound iATU is not being enabled\n"); return -EBUSY; } @@ -284,7 +284,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar, usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX); } - dev_err(pci->dev, "inbound iATU is not being enabled\n"); + dev_err(pci->dev, "Inbound iATU is not being enabled\n"); return -EBUSY; } @@ -313,16 +313,16 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci) { int retries; - /* check if the link is up or not */ + /* Check if the link is up or not */ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { if (dw_pcie_link_up(pci)) { - dev_info(pci->dev, "link up\n"); + dev_info(pci->dev, "Link up\n"); return 0; } usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); } - dev_err(pci->dev, "phy link never came up\n"); + dev_err(pci->dev, "Phy link never came up\n"); return -ETIMEDOUT; } @@ -351,7 +351,7 @@ void dw_pcie_setup(struct dw_pcie *pci) if (ret) lanes = 0; - /* set the number of lanes */ + /* Set the number of lanes */ val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; switch (lanes) { @@ -373,7 +373,7 @@ void dw_pcie_setup(struct dw_pcie *pci) } dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); - /* set link width speed control register */ + /* Set link width speed control register */ val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); val &= ~PORT_LOGIC_LINK_WIDTH_MASK; switch (lanes) { -- cgit v1.2.3