From 99cde44edfa06b5f910c1704cb15d36310a56545 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 17 Jan 2017 13:35:03 +0530 Subject: parisc: eisa: Remove coding style errors This patch removes coding style errors in the eisa driver. Signed-off-by: Arvind Yadav Signed-off-by: Helge Deller --- drivers/parisc/eisa.c | 104 +++++++++++++++++++++++++------------------------- 1 file changed, 52 insertions(+), 52 deletions(-) (limited to 'drivers/parisc') diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 103095bbe8c0..59edee911f7d 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -14,16 +14,16 @@ * Wax ASIC also includes a PS/2 and RS-232 controller, but those are * dealt with elsewhere; this file is concerned only with the EISA portions * of Wax. - * - * + * + * * HINT: * ----- * To allow an ISA card to work properly in the EISA slot you need to - * set an edge trigger level. This may be done on the palo command line - * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with + * set an edge trigger level. This may be done on the palo command line + * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with * n and n2 as the irq levels you want to use. - * - * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at + * + * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at * irq levels 10 and 11. */ @@ -46,9 +46,9 @@ #include #if 0 -#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg ) +#define EISA_DBG(msg, arg...) printk(KERN_DEBUG "eisa: " msg, ## arg) #else -#define EISA_DBG(msg, arg... ) +#define EISA_DBG(msg, arg...) #endif #define SNAKES_EEPROM_BASE_ADDR 0xF0810400 @@ -108,7 +108,7 @@ void eisa_out8(unsigned char data, unsigned short port) void eisa_out16(unsigned short data, unsigned short port) { - if (EISA_bus) + if (EISA_bus) gsc_writew(cpu_to_le16(data), eisa_permute(port)); } @@ -135,9 +135,9 @@ static int master_mask; static int slave_mask; /* the trig level can be set with the - * eisa_irq_edge=n,n,n commandline parameter - * We should really read this from the EEPROM - * in the furure. + * eisa_irq_edge=n,n,n commandline parameter + * We should really read this from the EEPROM + * in the furure. */ /* irq 13,8,2,1,0 must be edge */ static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */ @@ -170,7 +170,7 @@ static void eisa_unmask_irq(struct irq_data *d) unsigned int irq = d->irq; unsigned long flags; EISA_DBG("enable irq %d\n", irq); - + spin_lock_irqsave(&eisa_irq_lock, flags); if (irq & 8) { slave_mask &= ~(1 << (irq&7)); @@ -194,7 +194,7 @@ static irqreturn_t eisa_irq(int wax_irq, void *intr_dev) { int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */ unsigned long flags; - + spin_lock_irqsave(&eisa_irq_lock, flags); /* read IRR command */ eisa_out8(0x0a, 0x20); @@ -202,31 +202,31 @@ static irqreturn_t eisa_irq(int wax_irq, void *intr_dev) EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n", irq, eisa_in8(0x20), eisa_in8(0xa0)); - + /* read ISR command */ eisa_out8(0x0a, 0x20); eisa_out8(0x0a, 0xa0); EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n", eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1)); - + irq &= 0xf; - + /* mask irq and write eoi */ if (irq & 8) { slave_mask |= (1 << (irq&7)); eisa_out8(slave_mask, 0xa1); eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */ - eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ - + eisa_out8(0x62, 0x20); /* 'Specific EOI' to master-IRQ2 */ + } else { master_mask |= (1 << (irq&7)); eisa_out8(master_mask, 0x21); - eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */ + eisa_out8(0x60|irq, 0x20); /* 'Specific EOI' to master */ } spin_unlock_irqrestore(&eisa_irq_lock, flags); generic_handle_irq(irq); - + spin_lock_irqsave(&eisa_irq_lock, flags); /* unmask */ if (irq & 8) { @@ -254,44 +254,44 @@ static struct irqaction irq2_action = { static void init_eisa_pic(void) { unsigned long flags; - + spin_lock_irqsave(&eisa_irq_lock, flags); eisa_out8(0xff, 0x21); /* mask during init */ eisa_out8(0xff, 0xa1); /* mask during init */ - + /* master pic */ - eisa_out8(0x11,0x20); /* ICW1 */ - eisa_out8(0x00,0x21); /* ICW2 */ - eisa_out8(0x04,0x21); /* ICW3 */ - eisa_out8(0x01,0x21); /* ICW4 */ - eisa_out8(0x40,0x20); /* OCW2 */ - + eisa_out8(0x11, 0x20); /* ICW1 */ + eisa_out8(0x00, 0x21); /* ICW2 */ + eisa_out8(0x04, 0x21); /* ICW3 */ + eisa_out8(0x01, 0x21); /* ICW4 */ + eisa_out8(0x40, 0x20); /* OCW2 */ + /* slave pic */ - eisa_out8(0x11,0xa0); /* ICW1 */ - eisa_out8(0x08,0xa1); /* ICW2 */ - eisa_out8(0x02,0xa1); /* ICW3 */ - eisa_out8(0x01,0xa1); /* ICW4 */ - eisa_out8(0x40,0xa0); /* OCW2 */ - + eisa_out8(0x11, 0xa0); /* ICW1 */ + eisa_out8(0x08, 0xa1); /* ICW2 */ + eisa_out8(0x02, 0xa1); /* ICW3 */ + eisa_out8(0x01, 0xa1); /* ICW4 */ + eisa_out8(0x40, 0xa0); /* OCW2 */ + udelay(100); - - slave_mask = 0xff; - master_mask = 0xfb; + + slave_mask = 0xff; + master_mask = 0xfb; eisa_out8(slave_mask, 0xa1); /* OCW1 */ eisa_out8(master_mask, 0x21); /* OCW1 */ - + /* setup trig level */ EISA_DBG("EISA edge/level %04x\n", eisa_irq_level); - + eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */ - eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); - + eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); + EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0)); EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1)); - + spin_unlock_irqrestore(&eisa_irq_lock, flags); } @@ -305,7 +305,7 @@ static int __init eisa_probe(struct parisc_device *dev) char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; - printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", + printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", name, (unsigned long)dev->hpa.start); eisa_dev.hba.dev = dev; @@ -336,14 +336,14 @@ static int __init eisa_probe(struct parisc_device *dev) printk(KERN_ERR "EISA: request_irq failed!\n"); return result; } - + /* Reserve IRQ2 */ setup_irq(2, &irq2_action); for (i = 0; i < 16; i++) { irq_set_chip_and_handler(i, &eisa_interrupt_type, handle_simple_irq); } - + EISA_bus = 1; if (dev->num_addrs) { @@ -375,7 +375,7 @@ static int __init eisa_probe(struct parisc_device *dev) return -1; } } - + return 0; } @@ -404,7 +404,7 @@ void eisa_make_irq_level(int num) { if (eisa_irq_configured& (1< 15 || val < 0) { printk(KERN_ERR "eisa: EISA irq value are 0-15\n"); continue; } - if (val == 2) { + if (val == 2) { val = 9; } eisa_make_irq_edge(val); /* clear the corresponding bit */ EISA_DBG("setting IRQ %d to edge-triggered mode\n", val); - + if ((cur = strchr(cur, ','))) { cur++; } else { -- cgit v1.2.3