From 8edf3fd6eb0649b0f19363baf23bca39c6fbdba4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 28 May 2013 21:32:47 +0200 Subject: iwlwifi: don't print module loading error if not modular MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the opmode modules aren't modular, there's no point in printing an error message that request_module() failed. This will happen because the probe runs during iwlwifi's init and the opmode is only added during its init. Reported-by: Jörg Otte Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-drv.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c index 39aad9893e0b..40fed1f511e2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/iwlwifi/iwl-drv.c @@ -1000,10 +1000,12 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context) */ if (load_module) { err = request_module("%s", op->name); +#ifdef CONFIG_IWLWIFI_OPMODE_MODULAR if (err) IWL_ERR(drv, "failed to load module %s (error %d), is dynamic loading enabled?\n", op->name, err); +#endif } return; -- cgit v1.2.3 From b28b6dfe580ab1ab8bf08b908fd69e299b877103 Mon Sep 17 00:00:00 2001 From: Nikolay Martynov Date: Fri, 31 May 2013 01:29:12 -0400 Subject: iwlwifi: dvm: fix chain noise calibration First step of chain noise calibration process had disable flag check inverted. Chain noise calibration never started because of this. Tested on intel 5300 with two antennas attached. The driver correctly disabled one chain. Cc: stable@vger.kernel.org Signed-off-by: Nikolay Martynov Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 707446fa00bd..cd1ad0019185 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1378,7 +1378,7 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv) struct iwl_chain_noise_data *data = &priv->chain_noise_data; int ret; - if (!(priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)) + if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED) return; if ((data->state == IWL_CHAIN_NOISE_ALIVE) && -- cgit v1.2.3 From 2edc6ec6330c7906f4dbd7f5da71be8989efc5a3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 2 Jun 2013 19:49:15 +0300 Subject: iwlwifi: mvm: correctly set the flags for BAR Somehow, the Tx flags for BAR were completely wrong. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index f212f16502ff..48c1891e3df6 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -180,7 +180,8 @@ static void iwl_mvm_set_tx_cmd_rate(struct iwl_mvm *mvm, tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); return; } else if (ieee80211_is_back_req(fc)) { - tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE); + tx_cmd->tx_flags |= + cpu_to_le32(TX_CMD_FLG_ACK | TX_CMD_FLG_BAR); } /* HT rate doesn't make sense for a non data frame */ -- cgit v1.2.3 From 92bb73ea2c434618a68a58a2f3a5c3fd0b660d18 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 5 Jun 2013 16:44:57 +0800 Subject: tuntap: fix a possible race between queue selection and changing queues Complier may generate codes that re-read the tun->numqueues during tun_select_queue(). This may be a race if vlan->numqueues were changed in the same time and can lead unexpected result (e.g. very huge value). We need prevent the compiler from generating such codes by adding an ACCESS_ONCE() to make sure tun->numqueues were only read once. Bug were introduced by commit c8d68e6be1c3b242f1c598595830890b65cea64a (tuntap: multiqueue support). Reported-by: Michael S. Tsirkin Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 89776c592151..b1cbfbcff789 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -352,7 +352,7 @@ static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb) u32 numqueues = 0; rcu_read_lock(); - numqueues = tun->numqueues; + numqueues = ACCESS_ONCE(tun->numqueues); txq = skb_get_rxhash(skb); if (txq) { -- cgit v1.2.3 From 2786aae7fc935e44f81d5f359b6a768c81b46a9b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Wed, 5 Jun 2013 18:54:00 +0200 Subject: net/ti davinci_mdio: don't hold a spin lock while calling pm_runtime was playing with suspend and run into this: |BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:891 |in_atomic(): 1, irqs_disabled(): 0, pid: 1963, name: bash |6 locks held by bash/1963: |CPU: 0 PID: 1963 Comm: bash Not tainted 3.10.0-rc4+ #50 |[] (unwind_backtrace+0x0/0xf8) from [] (show_stack+0x10/0x14) |[] (show_stack+0x10/0x14) from [] (__pm_runtime_idle+0xa4/0xac) |[] (__pm_runtime_idle+0xa4/0xac) from [] (davinci_mdio_suspend+0x6c/0x9c) |[] (davinci_mdio_suspend+0x6c/0x9c) from [] (platform_pm_suspend+0x2c/0x54) |[] (platform_pm_suspend+0x2c/0x54) from [] (dpm_run_callback.isra.3+0x2c/0x64) |[] (dpm_run_callback.isra.3+0x2c/0x64) from [] (__device_suspend+0x100/0x22c) |[] (__device_suspend+0x100/0x22c) from [] (dpm_suspend+0x68/0x230) |[] (dpm_suspend+0x68/0x230) from [] (suspend_devices_and_enter+0x68/0x350) |[] (suspend_devices_and_enter+0x68/0x350) from [] (pm_suspend+0x210/0x24c) |[] (pm_suspend+0x210/0x24c) from [] (state_store+0x6c/0xbc) |[] (state_store+0x6c/0xbc) from [] (kobj_attr_store+0x14/0x20) |[] (kobj_attr_store+0x14/0x20) from [] (sysfs_write_file+0x16c/0x19c) |[] (sysfs_write_file+0x16c/0x19c) from [] (vfs_write+0xb4/0x190) |[] (vfs_write+0xb4/0x190) from [] (SyS_write+0x3c/0x70) |[] (SyS_write+0x3c/0x70) from [] (ret_fast_syscall+0x0/0x48) I don't see a reason why the pm_runtime call must be under the lock. Further I don't understand why this is a spinlock and not mutex. Cc: Mugunthan V N Signed-off-by: Sebastian Andrzej Siewior Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 12aec173564c..b2275d1b19b3 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev) __raw_writel(ctrl, &data->regs->control); wait_for_idle(data); - pm_runtime_put_sync(data->dev); - data->suspended = true; spin_unlock(&data->lock); + pm_runtime_put_sync(data->dev); return 0; } @@ -462,9 +461,9 @@ static int davinci_mdio_resume(struct device *dev) struct davinci_mdio_data *data = dev_get_drvdata(dev); u32 ctrl; - spin_lock(&data->lock); pm_runtime_get_sync(data->dev); + spin_lock(&data->lock); /* restart the scan state machine */ ctrl = __raw_readl(&data->regs->control); ctrl |= CONTROL_ENABLE; -- cgit v1.2.3 From 9f8c4265bda4a6e9aa97041d5cfd91386f460b65 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 5 Jun 2013 23:54:01 +0400 Subject: sh_eth: fix result of sh_eth_check_reset() on timeout When the first loop in sh_eth_check_reset() runs to its end, 'cnt' is 0, so the following check for 'cnt < 0' fails to catch the timeout. Fix the condition in this check, so that the timeout is actually reported. While at it, fix the grammar in the failure message... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 42e9dd05c936..b4479b5aaee4 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev) mdelay(1); cnt--; } - if (cnt < 0) { - pr_err("Device reset fail\n"); + if (cnt <= 0) { + pr_err("Device reset failed\n"); ret = -ETIMEDOUT; } return ret; -- cgit v1.2.3 From c2020be3c35ab230b4ee046c262ddab3e0d3aab4 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 6 Jun 2013 12:57:02 +0200 Subject: qmi_wwan/cdc_ether: let qmi_wwan handle the Huawei E1820 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Another QMI speaking Qualcomm based device, which should be driven by qmi_wwan, while cdc_ether should ignore it. Like on other Huawei devices, the wwan function can appear either as a single vendor specific interface or as a CDC ECM class function using separate control and data interfaces. The ECM control interface protocol is 0xff, likely in an attempt to indicate that vendor specific management is required. In addition to the near standard CDC class, Huawei also add vendor specific AT management commands to their firmwares. This is probably an attempt to support non-Windows systems using standard class drivers. Unfortunately, this part of the firmware is often buggy. Linux is much better off using whatever native vendor specific management protocol the device offers, and Windows uses, whenever possible. This means QMI in the case of Qualcomm based devices. The E1820 has been verified to work fine with QMI. Matching on interface number is necessary to distiguish the wwan function from serial functions in the single interface mode, as both function types will have class/subclass/function set to ff/ff/ff. The control interface number does not change in CDC ECM mode, so the interface number matching rule is sufficient to handle both modes. The cdc_ether blacklist entry is only relevant in CDC ECM mode, but using a similar interface number based rule helps document this as a transfer from one driver to another. Other Huawei 02/06/ff devices are left with the cdc_ether driver because we do not know whether they are based on Qualcomm chips. The Huawei specific AT command management is known to be somewhat hardware independent, and their usage of these class codes may also be independent of the modem hardware. Reported-by: Graham Inggs Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 6 ++++++ drivers/net/usb/qmi_wwan.c | 1 + 2 files changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 078795fe6e31..04ee044dde51 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -627,6 +627,12 @@ static const struct usb_device_id products [] = { .driver_info = 0, }, +/* Huawei E1820 - handled by qmi_wwan */ +{ + USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1), + .driver_info = 0, +}, + /* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */ #if defined(CONFIG_USB_RTL8152) || defined(CONFIG_USB_RTL8152_MODULE) { diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 86adfa0a912e..d095d0d3056b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -519,6 +519,7 @@ static const struct usb_device_id products[] = { /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ + {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, -- cgit v1.2.3 From 19a6afb23e5d323e1245baa4e62755492b2f1200 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Sat, 8 Jun 2013 14:17:41 +0800 Subject: tuntap: set SOCK_ZEROCOPY flag during open Commit 54f968d6efdbf7dec36faa44fc11f01b0e4d1990 (tuntap: move socket to tun_file) forgets to set SOCK_ZEROCOPY flag, which will prevent vhost_net from doing zercopy w/ tap. This patch fixes this by setting it during file open. Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index b1cbfbcff789..bfa9bb48e42d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -2159,6 +2159,8 @@ static int tun_chr_open(struct inode *inode, struct file * file) set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags); INIT_LIST_HEAD(&tfile->next); + sock_set_flag(&tfile->sk, SOCK_ZEROCOPY); + return 0; } -- cgit v1.2.3 From 76c455decbbad31de21c727edb184a963f42b40b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:53 +0200 Subject: team: check return value of team_get_port_by_index_rcu() for NULL team_get_port_by_index_rcu() might return NULL due to race between port removal and skb tx path. Panic is easily triggeable when txing packets and adding/removing port in a loop. introduced by commit 3d249d4ca "net: introduce ethernet teaming device" and commit 753f993911b "team: introduce random mode" (for random mode) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team_mode_random.c | 2 ++ drivers/net/team/team_mode_roundrobin.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/team/team_mode_random.c b/drivers/net/team/team_mode_random.c index 5ca14d463ba7..7f032e211343 100644 --- a/drivers/net/team/team_mode_random.c +++ b/drivers/net/team/team_mode_random.c @@ -28,6 +28,8 @@ static bool rnd_transmit(struct team *team, struct sk_buff *skb) port_index = random_N(team->en_port_count); port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; diff --git a/drivers/net/team/team_mode_roundrobin.c b/drivers/net/team/team_mode_roundrobin.c index d268e4de781b..472623f8ce3d 100644 --- a/drivers/net/team/team_mode_roundrobin.c +++ b/drivers/net/team/team_mode_roundrobin.c @@ -32,6 +32,8 @@ static bool rr_transmit(struct team *team, struct sk_buff *skb) port_index = rr_priv(team)->sent_packets++ % team->en_port_count; port = team_get_port_by_index_rcu(team, port_index); + if (unlikely(!port)) + goto drop; port = team_get_first_port_txable_rcu(team, port); if (unlikely(!port)) goto drop; -- cgit v1.2.3 From 72df935d985c1575ed44ad2c8c653b28147993fa Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sat, 8 Jun 2013 15:00:54 +0200 Subject: team: move add to port list before port enablement team_port_enable() adds port to port_hashlist. Reader sees port in team_get_port_by_index_rcu() and returns it, but team_get_first_port_txable_rcu() tries to go through port_list, where the port is not inserted yet -> NULL pointer dereference. Fix this by reordering port_list and port_hashlist insertion. Panic is easily triggeable when txing packets and adding/removing port in a loop. Introduced by commit 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index d016a76ad44b..b3051052f3ad 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1092,8 +1092,8 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } port->index = -1; - team_port_enable(team, port); list_add_tail_rcu(&port->list, &team->port_list); + team_port_enable(team, port); __team_compute_features(team); __team_port_change_port_added(port, !!netif_carrier_ok(port_dev)); __team_options_change_check(team); -- cgit v1.2.3 From 622ebe994f6866b8d46ee5d3bcc329ed65d3722d Mon Sep 17 00:00:00 2001 From: Moshe Benji Date: Mon, 3 Jun 2013 19:27:16 +0300 Subject: iwlwifi: fix rate control regression Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. [same fix as for iwlegacy, thanks Stanislaw!] Signed-off-by: Moshe Benji Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rs.c | 2 +- drivers/net/wireless/iwlwifi/mvm/rs.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 907bd6e50aad..10fbb176cc8e 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -2799,7 +2799,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; - + info->control.rates[0].count = 1; } static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta, diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 55334d542e26..b99fe3163866 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -2546,6 +2546,7 @@ static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; + info->control.rates[0].count = 1; } static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, -- cgit v1.2.3 From f873ded213d6d8c36354c0fc903af44da4fd6ac5 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 29 May 2013 12:25:34 -0700 Subject: mwifiex: debugfs: Fix out of bounds array access When reading the contents of '/sys/kernel/debug/mwifiex/p2p0/info', the following panic occurs: $ cat /sys/kernel/debug/mwifiex/p2p0/info Unable to handle kernel paging request at virtual address 74706164 pgd = de530000 [74706164] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: phy_twl4030_usb omap2430 musb_hdrc mwifiex_sdio mwifiex CPU: 0 PID: 1635 Comm: cat Not tainted 3.10.0-rc1-00010-g1268390 #1 task: de16b6c0 ti: de048000 task.ti: de048000 PC is at strnlen+0xc/0x4c LR is at string+0x3c/0xf8 pc : [] lr : [] psr: a0000013 sp : de049e10 ip : c06efba0 fp : de6d2092 r10: bf01a260 r9 : ffffffff r8 : 74706164 r7 : 0000ffff r6 : ffffffff r5 : de6d209c r4 : 00000000 r3 : ff0a0004 r2 : 74706164 r1 : ffffffff r0 : 74706164 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e530019 DAC: 00000015 Process cat (pid: 1635, stack limit = 0xde048240) Stack: (0xde049e10 to 0xde04a000) 9e00: de6d2092 00000002 bf01a25e de6d209c 9e20: de049e80 c02c438c 0000000a ff0a0004 ffffffff 00000000 00000000 de049e48 9e40: 00000000 2192df6d ff0a0004 ffffffff 00000000 de6d2092 de049ef8 bef3cc00 9e60: de6b0000 dc358000 de6d2000 00000000 00000003 c02c45a4 bf01790c bf01a254 9e80: 74706164 bf018698 00000000 de59c3c0 de048000 de049f80 00001000 bef3cc00 9ea0: 00000008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ee0: 00000000 00000000 00000000 00000001 00000000 00000000 6669776d 20786569 9f00: 20302e31 2e343128 392e3636 3231702e 00202933 00000000 00000003 c0294898 9f20: 00000000 00000000 00000000 00000000 de59c3c0 c0107c04 de554000 de59c3c0 9f40: 00001000 bef3cc00 de049f80 bef3cc00 de049f80 00000000 00000003 c0108a00 9f60: de048000 de59c3c0 00000000 00000000 de59c3c0 00001000 bef3cc00 c0108b60 9f80: 00000000 00000000 00001000 bef3cc00 00000003 00000003 c0014128 de048000 9fa0: 00000000 c0013f80 00001000 bef3cc00 00000003 bef3cc00 00001000 00000000 9fc0: 00001000 bef3cc00 00000003 00000003 00000001 00000001 00000001 00000003 9fe0: 00000000 bef3cbdc 00011984 b6f1127c 60000010 00000003 18dbdd2c 7f7bfffd [] (strnlen+0xc/0x4c) from [] (string+0x3c/0xf8) [] (string+0x3c/0xf8) from [] (vsnprintf+0x1e8/0x3e8) [] (vsnprintf+0x1e8/0x3e8) from [] (sprintf+0x18/0x24) [] (sprintf+0x18/0x24) from [] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) [] (mwifiex_info_read+0xfc/0x3e8 [mwifiex]) from [] (vfs_read+0xb0/0x144) [] (vfs_read+0xb0/0x144) from [] (SyS_read+0x44/0x70) [] (SyS_read+0x44/0x70) from [] (ret_fast_syscall+0x0/0x30) Code: e12fff1e e3510000 e1a02000 0a00000d (e5d03000) ---[ end trace ca98273dc605a04f ]--- The panic is caused by the mwifiex_info_read() routine assuming that there can only be four modes (0-3) which is an invalid assumption. For example, when testing P2P, the mode is '8' (P2P_CLIENT) so the code accesses data beyond the bounds of the bss_modes[] array which causes the panic. Fix this by updating bss_modes[] to support the current list of modes and adding a check to prevent the out-of-bounds access from occuring in the future when more modes are added. Signed-off-by: Mark A. Greer Acked-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/debugfs.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index 753b5682d53f..a5f9875cfd6e 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -26,10 +26,17 @@ static struct dentry *mwifiex_dfs_dir; static char *bss_modes[] = { - "Unknown", - "Ad-hoc", - "Managed", - "Auto" + "UNSPECIFIED", + "ADHOC", + "STATION", + "AP", + "AP_VLAN", + "WDS", + "MONITOR", + "MESH_POINT", + "P2P_CLIENT", + "P2P_GO", + "P2P_DEVICE", }; /* size/addr for mwifiex_debug_info */ @@ -200,7 +207,12 @@ mwifiex_info_read(struct file *file, char __user *ubuf, p += sprintf(p, "driver_version = %s", fmt); p += sprintf(p, "\nverext = %s", priv->version_str); p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); - p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + + if (info.bss_mode >= ARRAY_SIZE(bss_modes)) + p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); + else + p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + p += sprintf(p, "media_state=\"%s\"\n", (!priv->media_connected ? "Disconnected" : "Connected")); p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); -- cgit v1.2.3 From 5b8df24e22e0b00b599cb9ae63dbb96e1959be30 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 30 May 2013 18:05:55 -0500 Subject: rtlwifi: rtl8192cu: Fix problem in connecting to WEP or WPA(1) networks Driver rtl8192cu can connect to WPA2 networks, but fails for any other encryption method. The cause is a failure to set the rate control data blocks. These changes fix https://bugzilla.redhat.com/show_bug.cgi?id=952793 and https://bugzilla.redhat.com/show_bug.cgi?id=761525. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 134 ++++++++++++++++++++------- drivers/net/wireless/rtlwifi/rtl8192cu/hw.h | 4 - drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 18 +++- drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 4 +- drivers/net/wireless/rtlwifi/rtl8192cu/sw.h | 3 + drivers/net/wireless/rtlwifi/usb.c | 13 +++ drivers/net/wireless/rtlwifi/wifi.h | 4 + 7 files changed, 139 insertions(+), 41 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c index 3d0498e69c8c..189ba124a8c6 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c @@ -1973,26 +1973,35 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) } } -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level) +static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_value = (u32) mac->basic_rates; - u8 *mcsrate = mac->mcs; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; u8 ratr_index = 0; u8 nmode = mac->ht_enable; - u8 mimo_ps = 1; - u16 shortgi_rate = 0; - u32 tmp_ratr_value = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate; + u32 tmp_ratr_value; u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; enum wireless_mode wirelessmode = mac->mode; - ratr_value |= ((*(u16 *) (mcsrate))) << 12; + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_value = 0xfff; + + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: if (ratr_value & 0x0000000c) @@ -2006,7 +2015,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: nmode = 1; - if (mimo_ps == 0) { + if (mimo_ps == IEEE80211_SMPS_STATIC) { ratr_value &= 0x0007F005; } else { u32 ratr_mask; @@ -2016,8 +2025,7 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_mask = 0x000ff005; else ratr_mask = 0x0f0ff005; - if (curtxbw_40mhz) - ratr_mask |= 0x00000010; + ratr_value &= ratr_mask; } break; @@ -2026,41 +2034,74 @@ void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, ratr_value &= 0x000ff0ff; else ratr_value &= 0x0f0ff0ff; + break; } + ratr_value &= 0x0FFFFFFF; - if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || - (!curtxbw_40mhz && curshortgi_20mhz))) { + + if (nmode && ((curtxbw_40mhz && + curshortgi_40mhz) || (!curtxbw_40mhz && + curshortgi_20mhz))) { + ratr_value |= 0x10000000; tmp_ratr_value = (ratr_value >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { if ((1 << shortgi_rate) & tmp_ratr_value) break; } + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | - (shortgi_rate << 4) | (shortgi_rate); + (shortgi_rate << 4) | (shortgi_rate); } + rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", + rtl_read_dword(rtlpriv, REG_ARFR0)); } -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) +static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_phy *rtlphy = &(rtlpriv->phy); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - u32 ratr_bitmap = (u32) mac->basic_rates; - u8 *p_mcsrate = mac->mcs; - u8 ratr_index = 0; - u8 curtxbw_40mhz = mac->bw_40; - u8 curshortgi_40mhz = mac->sgi_40; - u8 curshortgi_20mhz = mac->sgi_20; - enum wireless_mode wirelessmode = mac->mode; + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; bool shortgi = false; u8 rate_mask[5]; u8 macid = 0; - u8 mimops = 1; - - ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12); + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + if (mac->opmode == NL80211_IFTYPE_ADHOC) + ratr_bitmap = 0xfff; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); switch (wirelessmode) { case WIRELESS_MODE_B: ratr_index = RATR_INX_WIRELESS_B; @@ -2071,6 +2112,7 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; case WIRELESS_MODE_G: ratr_index = RATR_INX_WIRELESS_GB; + if (rssi_level == 1) ratr_bitmap &= 0x00000f00; else if (rssi_level == 2) @@ -2085,7 +2127,8 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) case WIRELESS_MODE_N_24G: case WIRELESS_MODE_N_5G: ratr_index = RATR_INX_WIRELESS_NGB; - if (mimops == 0) { + + if (mimo_ps == IEEE80211_SMPS_STATIC) { if (rssi_level == 1) ratr_bitmap &= 0x00070000; else if (rssi_level == 2) @@ -2128,8 +2171,10 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) } } } + if ((curtxbw_40mhz && curshortgi_40mhz) || (!curtxbw_40mhz && curshortgi_20mhz)) { + if (macid == 0) shortgi = true; else if (macid == 1) @@ -2138,21 +2183,42 @@ void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level) break; default: ratr_index = RATR_INX_WIRELESS_NGB; + if (rtlphy->rf_type == RF_1T2R) ratr_bitmap &= 0x000ff0ff; else ratr_bitmap &= 0x0f0ff0ff; break; } - RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "ratr_bitmap :%x\n", - ratr_bitmap); - *(u32 *)&rate_mask = ((ratr_bitmap & 0x0fffffff) | - ratr_index << 28); + sta_entry->ratr_index = ratr_index; + + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + "ratr_bitmap :%x\n", ratr_bitmap); + *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) | + (ratr_index << 28); rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80; RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "Rate_index:%x, ratr_val:%x, %5phC\n", ratr_index, ratr_bitmap, rate_mask); - rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask); + memcpy(rtlpriv->rate_mask, rate_mask, 5); + /* rtl92c_fill_h2c_cmd() does USB I/O and will result in a + * "scheduled while atomic" if called directly */ + schedule_work(&rtlpriv->works.fill_h2c_cmd); + + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92cu_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92cu_update_hal_rate_table(hw, sta); } void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw) diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h index f41a3aa4a26f..8e3ec1e25644 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h @@ -98,10 +98,6 @@ void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw, u32 add_msr, u32 rm_msr); void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); -void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, - struct ieee80211_sta *sta, - u8 rssi_level); -void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level); void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw); bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index 85b6bdb163c0..da4f587199ee 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -289,14 +289,30 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index, macaddr = cam_const_broad; entry_id = key_index; } else { + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, COMP_SEC, + DBG_EMERG, + "Can not find free hw security cam entry\n"); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + key_index = PAIRWISE_KEYIDX; - entry_id = CAM_PAIRWISE_KEY_POSITION; is_pairwise = true; } } if (rtlpriv->sec.key_len[key_index] == 0) { RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "delete one entry\n"); + if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_MESH_POINT) + rtl_cam_del_entry(hw, p_macaddr); rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); } else { RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 938b1e670b93..826f085c29dd 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -106,8 +106,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .update_interrupt_mask = rtl92cu_update_interrupt_mask, .get_hw_reg = rtl92cu_get_hw_reg, .set_hw_reg = rtl92cu_set_hw_reg, - .update_rate_tbl = rtl92cu_update_hal_rate_table, - .update_rate_mask = rtl92cu_update_hal_rate_mask, + .update_rate_tbl = rtl92cu_update_hal_rate_tbl, .fill_tx_desc = rtl92cu_tx_fill_desc, .fill_fake_txdesc = rtl92cu_fill_fake_txdesc, .fill_tx_cmddesc = rtl92cu_tx_fill_cmddesc, @@ -137,6 +136,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .phy_lc_calibrate = _rtl92cu_phy_lc_calibrate, .phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback, .dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower, + .fill_h2c_cmd = rtl92c_fill_h2c_cmd, }; static struct rtl_mod_params rtl92cu_mod_params = { diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h index a1310abd0d54..262e1e4c6e5b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.h @@ -49,5 +49,8 @@ bool rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, u32 regaddr, u32 bitmask); void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw); +void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + u8 rssi_level); #endif diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 76732b0cd221..a3532e077871 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -824,6 +824,7 @@ static void rtl_usb_stop(struct ieee80211_hw *hw) /* should after adapter start and interrupt enable. */ set_hal_stop(rtlhal); + cancel_work_sync(&rtlpriv->works.fill_h2c_cmd); /* Enable software */ SET_USB_STOP(rtlusb); rtl_usb_deinit(hw); @@ -1026,6 +1027,16 @@ static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, return false; } +static void rtl_fill_h2c_cmd_work_callback(struct work_struct *work) +{ + struct rtl_works *rtlworks = + container_of(work, struct rtl_works, fill_h2c_cmd); + struct ieee80211_hw *hw = rtlworks->hw; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->cfg->ops->fill_h2c_cmd(hw, H2C_RA_MASK, 5, rtlpriv->rate_mask); +} + static struct rtl_intf_ops rtl_usb_ops = { .adapter_start = rtl_usb_start, .adapter_stop = rtl_usb_stop, @@ -1057,6 +1068,8 @@ int rtl_usb_probe(struct usb_interface *intf, /* this spin lock must be initialized early */ spin_lock_init(&rtlpriv->locks.usb_lock); + INIT_WORK(&rtlpriv->works.fill_h2c_cmd, + rtl_fill_h2c_cmd_work_callback); rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index 44328baa6389..cc03e7c87cbe 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -1736,6 +1736,8 @@ struct rtl_hal_ops { void (*bt_wifi_media_status_notify) (struct ieee80211_hw *hw, bool mstate); void (*bt_coex_off_before_lps) (struct ieee80211_hw *hw); + void (*fill_h2c_cmd) (struct ieee80211_hw *hw, u8 element_id, + u32 cmd_len, u8 *p_cmdbuffer); }; struct rtl_intf_ops { @@ -1869,6 +1871,7 @@ struct rtl_works { struct delayed_work fwevt_wq; struct work_struct lps_change_work; + struct work_struct fill_h2c_cmd; }; struct rtl_debug { @@ -2048,6 +2051,7 @@ struct rtl_priv { }; }; bool enter_ps; /* true when entering PS */ + u8 rate_mask[5]; /*This must be the last item so that it points to the data allocated -- cgit v1.2.3 From 60c28cf18f970e1c1bd40d615596eeab6efbd9d7 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 10 May 2013 10:19:38 +0300 Subject: wl12xx: fix minimum required firmware version for wl127x multirole There was a typo in commit 8675f9 (wlcore/wl12xx/wl18xx: verify multi-role and single-role fw versions), which was causing the multirole firmware for wl127x (WiLink6) to be rejected. The actual minimum version needed for wl127x multirole is 6.5.7.0.42. Reported-by: Levi Pearson Reported-by: Michael Scott Cc: stable@kernel.org # 3.9+ Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl12xx/wl12xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 222d03540200..139da4d13e97 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -41,7 +41,7 @@ #define WL127X_IFTYPE_MR_VER 5 #define WL127X_MAJOR_MR_VER 7 #define WL127X_SUBTYPE_MR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_MR_VER 115 +#define WL127X_MINOR_MR_VER 42 /* FW chip version for wl128x */ #define WL128X_CHIP_VER 7 -- cgit v1.2.3 From 0e284c074ef96554f2988298da7d110b0e8d1e23 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 10 May 2013 10:44:25 +0300 Subject: wl12xx: increase minimum singlerole firmware version required The minimum firmware version required for singlerole after recent driver changes is 6/7.3.10.0.133. Reported-by: Tony Lindgren Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl12xx/wl12xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ti/wl12xx/wl12xx.h b/drivers/net/wireless/ti/wl12xx/wl12xx.h index 139da4d13e97..9e5484a73667 100644 --- a/drivers/net/wireless/ti/wl12xx/wl12xx.h +++ b/drivers/net/wireless/ti/wl12xx/wl12xx.h @@ -36,7 +36,7 @@ #define WL127X_IFTYPE_SR_VER 3 #define WL127X_MAJOR_SR_VER 10 #define WL127X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL127X_MINOR_SR_VER 115 +#define WL127X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl127x */ #define WL127X_IFTYPE_MR_VER 5 #define WL127X_MAJOR_MR_VER 7 @@ -49,7 +49,7 @@ #define WL128X_IFTYPE_SR_VER 3 #define WL128X_MAJOR_SR_VER 10 #define WL128X_SUBTYPE_SR_VER WLCORE_FW_VER_IGNORE -#define WL128X_MINOR_SR_VER 115 +#define WL128X_MINOR_SR_VER 133 /* minimum multi-role FW version for wl128x */ #define WL128X_IFTYPE_MR_VER 5 #define WL128X_MAJOR_MR_VER 7 -- cgit v1.2.3 From a805de4d036152a4ad7d3b18a9993a5c86588d6d Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 7 May 2013 15:41:09 +0300 Subject: wl12xx/wl18xx: scan all 5ghz channels Due to a typo, the current code copies only sizeof(cmd->channels_2) bytes, which is smaller than the correct sizeof(cmd->channels_5) size, resulting in a partial scan (some channels are skipped). Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/ti/wl12xx/scan.c | 2 +- drivers/net/wireless/ti/wl18xx/scan.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ti/wl12xx/scan.c b/drivers/net/wireless/ti/wl12xx/scan.c index affdb3ec6225..4a0bbb13806b 100644 --- a/drivers/net/wireless/ti/wl12xx/scan.c +++ b/drivers/net/wireless/ti/wl12xx/scan.c @@ -310,7 +310,7 @@ static void wl12xx_adjust_channels(struct wl1271_cmd_sched_scan_config *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } diff --git a/drivers/net/wireless/ti/wl18xx/scan.c b/drivers/net/wireless/ti/wl18xx/scan.c index 09d944505ac0..2b642f8c9266 100644 --- a/drivers/net/wireless/ti/wl18xx/scan.c +++ b/drivers/net/wireless/ti/wl18xx/scan.c @@ -34,7 +34,7 @@ static void wl18xx_adjust_channels(struct wl18xx_cmd_scan_params *cmd, memcpy(cmd->channels_2, cmd_channels->channels_2, sizeof(cmd->channels_2)); memcpy(cmd->channels_5, cmd_channels->channels_5, - sizeof(cmd->channels_2)); + sizeof(cmd->channels_5)); /* channels_4 are not supported, so no need to copy them */ } -- cgit v1.2.3 From 87ccee46fabd235c2bac3652dee009e8f791dc10 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 30 May 2013 16:21:47 -0500 Subject: rtlwifi: Fix a false leak indication for PCI devices This false leak indication is avoided with a no-leak annotation to kmemleak. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 999ffc12578b..c97e9d327331 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -764,6 +764,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) "can't alloc skb for rx\n"); goto done; } + kmemleak_not_leak(new_skb); pci_unmap_single(rtlpci->pdev, *((dma_addr_t *) skb->cb), -- cgit v1.2.3 From 71aa5bba83f81722e7f6bfaeda16b983ba8a0cc2 Mon Sep 17 00:00:00 2001 From: Yijing Wang Date: Fri, 31 May 2013 14:05:32 +0800 Subject: net: wireless: iwlegacy: fix build error for il_pm_ops Fix build error for il_pm_ops if CONFIG_PM is set but CONFIG_PM_SLEEP is not set. ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl4965.ko] undefined! ERROR: "il_pm_ops" [drivers/net/wireless/iwlegacy/iwl3945.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Yijing Wang Cc: Stanislaw Gruszka Cc: "John W. Linville" Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Jingoo Han Acked-by: Jingoo Han Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index f8246f2d88f9..4caaf52986a4 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1832,16 +1832,16 @@ u32 il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval); __le32 il_add_beacon_time(struct il_priv *il, u32 base, u32 addon, u32 beacon_interval); -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops il_pm_ops; #define IL_LEGACY_PM_OPS (&il_pm_ops) -#else /* !CONFIG_PM */ +#else /* !CONFIG_PM_SLEEP */ #define IL_LEGACY_PM_OPS NULL -#endif /* !CONFIG_PM */ +#endif /* !CONFIG_PM_SLEEP */ /***************************************************** * Error Handling Debugging -- cgit v1.2.3 From 531671cb17af07281e6f28c1425f754346e65c41 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sat, 1 Jun 2013 07:08:09 +0530 Subject: ath9k: Disable PowerSave by default Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index aba415103f94..47d3269b69d5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -787,8 +787,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->iface_combinations = if_comb; hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb); - if (AR_SREV_5416(sc->sc_ah)) - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; -- cgit v1.2.3 From 96005931785238e1a24febf65ffb5016273e8225 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 3 Jun 2013 11:18:57 +0200 Subject: Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" This reverts commit 68d9e1fa24d9c7c2e527f49df8d18fb8cf0ec943 This change reduces rx sensitivity with no apparent extra benefit. It looks like it was meant for testing in a specific scenario, but it was never properly validated. Cc: rmanohar@qca.qualcomm.com Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index db5ffada2217..7546b9a7dcbf 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -958,11 +958,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = { {0x0000a074, 0x00000000}, {0x0000a078, 0x00000000}, {0x0000a07c, 0x00000000}, - {0x0000a080, 0x1a1a1a1a}, - {0x0000a084, 0x1a1a1a1a}, - {0x0000a088, 0x1a1a1a1a}, - {0x0000a08c, 0x1a1a1a1a}, - {0x0000a090, 0x171a1a1a}, + {0x0000a080, 0x22222229}, + {0x0000a084, 0x1d1d1d1d}, + {0x0000a088, 0x1d1d1d1d}, + {0x0000a08c, 0x1d1d1d1d}, + {0x0000a090, 0x171d1d1d}, {0x0000a094, 0x11111717}, {0x0000a098, 0x00030311}, {0x0000a09c, 0x00000000}, -- cgit v1.2.3 From 5efac94999ff218e0101f67a059e44abb4b0b523 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 6 Jun 2013 10:06:29 +0530 Subject: ath9k: Use minstrel rate control by default The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Cc: stable@vger.kernel.org Cc: Jouni Malinen Cc: Linus Torvalds Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 10 +++++++--- drivers/net/wireless/ath/ath9k/Makefile | 2 +- drivers/net/wireless/ath/ath9k/init.c | 4 ---- drivers/net/wireless/ath/ath9k/rc.h | 2 +- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index f3dc124c60c7..3c2cbc9d6295 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -92,13 +92,17 @@ config ATH9K_MAC_DEBUG This option enables collection of statistics for Rx/Tx status data and some other MAC related statistics -config ATH9K_RATE_CONTROL +config ATH9K_LEGACY_RATE_CONTROL bool "Atheros ath9k rate control" depends on ATH9K - default y + default n ---help--- Say Y, if you want to use the ath9k specific rate control - module instead of minstrel_ht. + module instead of minstrel_ht. Be warned that there are various + issues with the ath9k RC and minstrel is a more robust algorithm. + Note that even if this option is selected, "ath9k_rate_control" + has to be passed to mac80211 using the module parameter, + ieee80211_default_rc_algo. config ATH9K_HTC tristate "Atheros HTC based wireless cards support" diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 2ad8f9474ba1..75ee9e7704ce 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -8,7 +8,7 @@ ath9k-y += beacon.o \ antenna.o ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o -ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o +ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o ath9k-$(CONFIG_ATH9K_PCI) += pci.o ath9k-$(CONFIG_ATH9K_AHB) += ahb.o ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 47d3269b69d5..2ba494567777 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -829,10 +829,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) sc->ant_rx = hw->wiphy->available_antennas_rx; sc->ant_tx = hw->wiphy->available_antennas_tx; -#ifdef CONFIG_ATH9K_RATE_CONTROL - hw->rate_control_algorithm = "ath9k_rate_control"; -#endif - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &sc->sbands[IEEE80211_BAND_2GHZ]; diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h index 267dbfcfaa96..b9a87383cb43 100644 --- a/drivers/net/wireless/ath/ath9k/rc.h +++ b/drivers/net/wireless/ath/ath9k/rc.h @@ -231,7 +231,7 @@ static inline void ath_debug_stat_retries(struct ath_rate_priv *rc, int rix, } #endif -#ifdef CONFIG_ATH9K_RATE_CONTROL +#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL int ath_rate_control_register(void); void ath_rate_control_unregister(void); #else -- cgit v1.2.3 From e0e29b683d6784ef59bbc914eac85a04b650e63c Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 10 May 2013 14:48:21 -0700 Subject: b43: stop format string leaking into error msgs The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6dd07e2ec595..a95b77ab360e 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2458,7 +2458,7 @@ static void b43_request_firmware(struct work_struct *work) for (i = 0; i < B43_NR_FWTYPES; i++) { errmsg = ctx->errors[i]; if (strlen(errmsg)) - b43err(dev->wl, errmsg); + b43err(dev->wl, "%s", errmsg); } b43_print_fw_helptext(dev->wl, 1); goto out; -- cgit v1.2.3 From a8cf0194b7187fb65dfff28a1c5153d442e3836a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 4 Jun 2013 14:19:10 +0200 Subject: iwlegacy: fix rate control regression Since driver does not use control.rates[0].count, we have never set that variable. But currently, after rate control API rewrite, this is required by mac80211. Otherwise legacy rates control does not work and we transmit always at 1Mbit/s on pre 11n networks. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-rs.c | 1 + drivers/net/wireless/iwlegacy/4965-rs.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c index c9f197d9ca1e..fe31590a51b2 100644 --- a/drivers/net/wireless/iwlegacy/3945-rs.c +++ b/drivers/net/wireless/iwlegacy/3945-rs.c @@ -816,6 +816,7 @@ out: rs_sta->last_txrate_idx = idx; info->control.rates[0].idx = rs_sta->last_txrate_idx; } + info->control.rates[0].count = 1; D_RATE("leave: %d\n", idx); } diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index 1fc0b227e120..ed3c42a63a43 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -2268,7 +2268,7 @@ il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta, info->control.rates[0].flags = 0; } info->control.rates[0].idx = rate_idx; - + info->control.rates[0].count = 1; } static void * -- cgit v1.2.3 From 541e667e1c0f31a7e11d909eb831cf476814a201 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 6 Jun 2013 13:29:56 +0200 Subject: brcmsmac: disable power-save related functions This patch fixes a regression introduced by: commit 6da3b6c48d79da96a36c2632053cf4f53bf48fb2 Author: Hauke Mehrtens Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 28e7aeedd184..9fd6f2fef11b 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3074,21 +3074,8 @@ static void brcms_b_antsel_set(struct brcms_hardware *wlc_hw, u32 antsel_avail) */ static bool brcms_c_ps_allowed(struct brcms_c_info *wlc) { - /* disallow PS when one of the following global conditions meets */ - if (!wlc->pub->associated) - return false; - - /* disallow PS when one of these meets when not scanning */ - if (wlc->filter_flags & FIF_PROMISC_IN_BSS) - return false; - - if (wlc->bsscfg->type == BRCMS_TYPE_AP) - return false; - - if (wlc->bsscfg->type == BRCMS_TYPE_ADHOC) - return false; - - return true; + /* not supporting PS so always return false for now */ + return false; } static void brcms_c_statsupd(struct brcms_c_info *wlc) -- cgit v1.2.3 From 8c8d2017ba25c510ddf093419048460db1109bc4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 11 Jun 2013 18:48:53 +0200 Subject: rt2800: fix RT5390 & RT3290 TX power settings regression My change: commit cee2c7315f60beeff6137ee59e99acc77d636eeb Author: Stanislaw Gruszka Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by: Mike Romberg Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b52d70c75e1a..72f32e5caa4d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3027,19 +3027,26 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, * TODO: we do not use +6 dBm option to do not increase power beyond * regulatory limit, however this could be utilized for devices with * CAPABILITY_POWER_LIMIT. + * + * TODO: add different temperature compensation code for RT3290 & RT5390 + * to allow to use BBP_R1 for those chips. */ - rt2800_bbp_read(rt2x00dev, 1, &r1); - if (delta <= -12) { - power_ctrl = 2; - delta += 12; - } else if (delta <= -6) { - power_ctrl = 1; - delta += 6; - } else { - power_ctrl = 0; + if (!rt2x00_rt(rt2x00dev, RT3290) && + !rt2x00_rt(rt2x00dev, RT5390)) { + rt2800_bbp_read(rt2x00dev, 1, &r1); + if (delta <= -12) { + power_ctrl = 2; + delta += 12; + } else if (delta <= -6) { + power_ctrl = 1; + delta += 6; + } else { + power_ctrl = 0; + } + rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); + rt2800_bbp_write(rt2x00dev, 1, r1); } - rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, power_ctrl); - rt2800_bbp_write(rt2x00dev, 1, r1); + offset = TX_PWR_CFG_0; for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) { -- cgit v1.2.3 From 99ffc3e74fb0d9d321d2f19c6021e0dbaff2f4b2 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 13 Jun 2013 10:07:29 +0300 Subject: macvlan: don't touch promisc without passthrough commit df8ef8f3aaa6692970a436204c4429210addb23a "macvlan: add FDB bridge ops and macvlan flags" added a way to control NOPROMISC macvlan flag through netlink. However, with a non passthrough device we never set promisc on open, even if NOPROMISC is off. As a result: If userspace clears NOPROMISC on open, then does not clear it on a netlink command, promisc counter is not decremented on stop and there will be no way to clear it once macvlan is detached. If userspace does not clear NOPROMISC on open, then sets NOPROMISC on a netlink command, promisc counter will be decremented from 0 and overflow to fffffffff with no way to clear promisc. To fix, simply ignore NOPROMISC flag in a netlink command for non-passthrough devices, same as we do at open/close. Since we touch this code anyway - check dev_set_promiscuity return code and pass it to users (though an error here is unlikely). Cc: "David S. Miller" Reviewed-by: John Fastabend Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 1c502bb0c916..6e91931a1c2c 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -853,18 +853,24 @@ static int macvlan_changelink(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct macvlan_dev *vlan = netdev_priv(dev); - if (data && data[IFLA_MACVLAN_MODE]) - vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); + if (data && data[IFLA_MACVLAN_FLAGS]) { __u16 flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); bool promisc = (flags ^ vlan->flags) & MACVLAN_FLAG_NOPROMISC; - - if (promisc && (flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, -1); - else if (promisc && !(flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(vlan->lowerdev, 1); + if (vlan->port->passthru && promisc) { + int err; + + if (flags & MACVLAN_FLAG_NOPROMISC) + err = dev_set_promiscuity(vlan->lowerdev, -1); + else + err = dev_set_promiscuity(vlan->lowerdev, 1); + if (err < 0) + return err; + } vlan->flags = flags; } + if (data && data[IFLA_MACVLAN_MODE]) + vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); return 0; } -- cgit v1.2.3 From 94f950c4060cd9b1989c565284beb159b9705a50 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 11 Jun 2013 11:00:34 +0100 Subject: xen-netback: don't de-reference vif pointer after having called xenvif_put() When putting vif-s on the rx notify list, calling xenvif_put() must be deferred until after the removal from the list and the issuing of the notification, as both operations dereference the pointer. Changing this got me to notice that the "irq" variable was effectively unused (and was of too narrow type anyway). Signed-off-by: Jan Beulich Acked-by: Ian Campbell Signed-off-by: David S. Miller --- drivers/net/xen-netback/netback.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 37984e6d4e99..8c20935d72c9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -662,7 +662,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) { struct xenvif *vif = NULL, *tmp; s8 status; - u16 irq, flags; + u16 flags; struct xen_netif_rx_response *resp; struct sk_buff_head rxq; struct sk_buff *skb; @@ -771,13 +771,13 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) sco->meta_slots_used); RING_PUSH_RESPONSES_AND_CHECK_NOTIFY(&vif->rx, ret); - irq = vif->irq; - if (ret && list_empty(&vif->notify_list)) - list_add_tail(&vif->notify_list, ¬ify); xenvif_notify_tx_completion(vif); - xenvif_put(vif); + if (ret && list_empty(&vif->notify_list)) + list_add_tail(&vif->notify_list, ¬ify); + else + xenvif_put(vif); npo.meta_cons += sco->meta_slots_used; dev_kfree_skb(skb); } @@ -785,6 +785,7 @@ static void xen_netbk_rx_action(struct xen_netbk *netbk) list_for_each_entry_safe(vif, tmp, ¬ify, notify_list) { notify_remote_via_irq(vif->irq); list_del_init(&vif->notify_list); + xenvif_put(vif); } /* More work to do? */ -- cgit v1.2.3 From 0c5fed09ab0feedd43c362b1c7fff67fdbf9548f Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Tue, 11 Jun 2013 17:18:22 +0530 Subject: be2net: Fix 32-bit DMA Mask handling Fix to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 8bc1b21b1c79..a0b4be51f0d1 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id) netdev->features |= NETIF_F_HIGHDMA; } else { status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (!status) + status = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); if (status) { dev_err(&pdev->dev, "Could not set PCI DMA Mask\n"); goto free_netdev; -- cgit v1.2.3 From 631f24a2febb228f82604dc5330091e8080cd8ae Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 12 Jun 2013 11:05:03 -0500 Subject: net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG used drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function: stmmac_xmit drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1902:74: error: expected ) before __func__ Signed-off-by: Dinh Nguyen Cc: Giuseppe Cavallaro CC: David S. Miller Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 618446ae1ec1..ee919ca8b8a0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef STMMAC_XMIT_DEBUG if (netif_msg_pktdata(priv)) { - pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d" + pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d", __func__, (priv->cur_tx % txsize), (priv->dirty_tx % txsize), entry, first, nfrags); if (priv->extend_desc) -- cgit v1.2.3 From b8fad459f9cc8417b74f71c6c229eef7412163d1 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 12 Jun 2013 00:07:01 +0200 Subject: bonding: reset master mac on first enslave failure If the bond device is supposed to get the first slave's MAC address and the first enslavement fails then we need to reset the master's MAC otherwise it will stay the same as the failed slave device. We do it after err_undo_flags since that is the first place where the MAC can be changed and we check if it should've been the first slave and if the bond's MAC was set to it because that err place is used by multiple locations prior to changing the master's MAC address. Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 29b846cbfb48..473633ab5f56 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1957,6 +1957,10 @@ err_free: err_undo_flags: bond_compute_features(bond); + /* Enslave of first slave has failed and we need to fix master's mac */ + if (bond->slave_cnt == 0 && + ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr)) + eth_hw_addr_random(bond_dev); return res; } -- cgit v1.2.3 From 4f5474e7fd68988cb11373fc698bf10b35b49e31 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 12 Jun 2013 00:07:02 +0200 Subject: bonding: fix igmp_retrans type and two related races First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 15 +++++++++++---- drivers/net/bonding/bonding.h | 2 +- 2 files changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 473633ab5f56..02d9ae7d527e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -764,8 +764,8 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) struct net_device *bond_dev, *vlan_dev, *upper_dev; struct vlan_entry *vlan; - rcu_read_lock(); read_lock(&bond->lock); + rcu_read_lock(); bond_dev = bond->dev; @@ -787,12 +787,19 @@ static void bond_resend_igmp_join_requests(struct bonding *bond) if (vlan_dev) __bond_resend_igmp_join_requests(vlan_dev); } + rcu_read_unlock(); - if (--bond->igmp_retrans > 0) + /* We use curr_slave_lock to protect against concurrent access to + * igmp_retrans from multiple running instances of this function and + * bond_change_active_slave + */ + write_lock_bh(&bond->curr_slave_lock); + if (bond->igmp_retrans > 1) { + bond->igmp_retrans--; queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); - + } + write_unlock_bh(&bond->curr_slave_lock); read_unlock(&bond->lock); - rcu_read_unlock(); } static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 2baec24388b1..f989e1529a29 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -225,7 +225,7 @@ struct bonding { rwlock_t curr_slave_lock; u8 send_peer_notif; s8 setup_by_slave; - s8 igmp_retrans; + u8 igmp_retrans; #ifdef CONFIG_PROC_FS struct proc_dir_entry *proc_entry; char proc_file_name[IFNAMSIZ]; -- cgit v1.2.3 From df465abfe06f7dc4f33f4a96d17f096e9e8ac917 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Wed, 12 Jun 2013 11:08:59 -0700 Subject: tg3: Wait for boot code to finish after power on Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 0f493c8dc28b..c777b9013164 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp) int i; u32 val; + if (tg3_flag(tp, NO_FWARE_REPORTED)) + return 0; + if (tg3_flag(tp, IS_SSB_CORE)) { /* We don't use firmware. */ return 0; @@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) */ static int tg3_init_hw(struct tg3 *tp, bool reset_phy) { + /* Chip may have been just powered on. If so, the boot code may still + * be running initialization. Wait for it to finish to avoid races in + * accessing the hardware. + */ + tg3_enable_register_access(tp); + tg3_poll_fw(tp); + tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); -- cgit v1.2.3 From 5033ec3e3f923a371c28f0c3df45905a9dd9c457 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 11 Jun 2013 15:32:04 +0530 Subject: drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driver MDIO driver should resume before CPSW ethernet driver so that CPSW connect to the phy and start tx/rx ethernet packets, changing the suspend/resume apis with suspend_late/resume_early. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index b2275d1b19b3..74e56b3fba11 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -476,8 +476,8 @@ static int davinci_mdio_resume(struct device *dev) } static const struct dev_pm_ops davinci_mdio_pm_ops = { - .suspend = davinci_mdio_suspend, - .resume = davinci_mdio_resume, + .suspend_late = davinci_mdio_suspend, + .resume_early = davinci_mdio_resume, }; static const struct of_device_id davinci_mdio_of_mtable[] = { -- cgit v1.2.3 From cc60ab0a8b5b62ea6b5cc1c6397adb5b4bd41271 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Tue, 11 Jun 2013 15:32:05 +0530 Subject: drivers: net: davinci_mdio: restore mdio clk divider in mdio resume During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 74e56b3fba11..c47f0dbcebb5 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -459,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev) static int davinci_mdio_resume(struct device *dev) { struct davinci_mdio_data *data = dev_get_drvdata(dev); - u32 ctrl; pm_runtime_get_sync(data->dev); spin_lock(&data->lock); /* restart the scan state machine */ - ctrl = __raw_readl(&data->regs->control); - ctrl |= CONTROL_ENABLE; - __raw_writel(ctrl, &data->regs->control); + __davinci_mdio_reset(data); data->suspended = false; spin_unlock(&data->lock); -- cgit v1.2.3 From dd019897358b815f7828dab90b51d51df4d3658d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 13 Jun 2013 10:15:45 +0900 Subject: net: sh_eth: fix incorrect RX length error if R8A7740 This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740. This patch also adds a description about the Receive Frame Status bits. Signed-off-by: Yoshihiro Shimoda Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index b4479b5aaee4..5e3982fc5398 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status) desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; -#if defined(CONFIG_ARCH_R8A7740) - desc_status >>= 16; -#endif - if (--boguscnt < 0) break; if (!(desc_status & RDFEND)) ndev->stats.rx_length_errors++; +#if defined(CONFIG_ARCH_R8A7740) + /* + * In case of almost all GETHER/ETHERs, the Receive Frame State + * (RFS) bits in the Receive Descriptor 0 are from bit 9 to + * bit 0. However, in case of the R8A7740's GETHER, the RFS + * bits are from bit 25 to bit 16. So, the driver needs right + * shifting by 16. + */ + desc_status >>= 16; +#endif + if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 | RD_RFS5 | RD_RFS6 | RD_RFS10)) { ndev->stats.rx_errors++; -- cgit v1.2.3 From fcb3701849957917a234a61b58ad70ed35c83eda Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 7 Jun 2013 11:03:00 +0200 Subject: brcmfmac: free primary net_device when brcmf_bus_start() fails When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org Tested-by: Stephen Warren Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index b98f2235978e..2c593570497c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -930,6 +930,10 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } + if (drvr->iflist[0]) { + free_netdev(ifp->ndev); + drvr->iflist[0] = NULL; + } if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; -- cgit v1.2.3 From c9bfbb31af7c8428267b34eb9706a621ac219a28 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Thu, 13 Jun 2013 15:31:28 -0400 Subject: tulip: Properly check dma mapping result Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman CC: Grant Grundler CC: "David S. Miller" Reviewed-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/ethernet/dec/tulip/interrupt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c index 28a5e425fecf..92306b320840 100644 --- a/drivers/net/ethernet/dec/tulip/interrupt.c +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev) mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&tp->pdev->dev, mapping)) { + dev_kfree_skb(skb); + tp->rx_buffers[entry].skb = NULL; + break; + } + tp->rx_buffers[entry].mapping = mapping; tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); -- cgit v1.2.3 From 8177a9d79c0e942dcac3312f15585d0344d505a5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Jun 2013 18:06:06 +0100 Subject: lseek(fd, n, SEEK_END) does *not* go to eof - n When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds --- drivers/net/ethernet/brocade/bna/bnad_debugfs.c | 2 +- drivers/scsi/bfa/bfad_debugfs.c | 2 +- drivers/scsi/fnic/fnic_debugfs.c | 2 +- drivers/scsi/lpfc/lpfc_debugfs.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c index 6e8bc9d88c41..94d957d203a6 100644 --- a/drivers/net/ethernet/brocade/bna/bnad_debugfs.c +++ b/drivers/net/ethernet/brocade/bna/bnad_debugfs.c @@ -244,7 +244,7 @@ bnad_debugfs_lseek(struct file *file, loff_t offset, int orig) file->f_pos += offset; break; case 2: - file->f_pos = debug->buffer_len - offset; + file->f_pos = debug->buffer_len + offset; break; default: return -EINVAL; diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c index 439c012be763..b63d534192e3 100644 --- a/drivers/scsi/bfa/bfad_debugfs.c +++ b/drivers/scsi/bfa/bfad_debugfs.c @@ -186,7 +186,7 @@ bfad_debugfs_lseek(struct file *file, loff_t offset, int orig) file->f_pos += offset; break; case 2: - file->f_pos = debug->buffer_len - offset; + file->f_pos = debug->buffer_len + offset; break; default: return -EINVAL; diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c index adc1f7f471f5..85e1ffd0e5c5 100644 --- a/drivers/scsi/fnic/fnic_debugfs.c +++ b/drivers/scsi/fnic/fnic_debugfs.c @@ -174,7 +174,7 @@ static loff_t fnic_trace_debugfs_lseek(struct file *file, pos = file->f_pos + offset; break; case 2: - pos = fnic_dbg_prt->buffer_len - offset; + pos = fnic_dbg_prt->buffer_len + offset; } return (pos < 0 || pos > fnic_dbg_prt->buffer_len) ? -EINVAL : (file->f_pos = pos); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index f63f5ff7f274..f525ecb7a9c6 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1178,7 +1178,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence) pos = file->f_pos + off; break; case 2: - pos = debug->len - off; + pos = debug->len + off; } return (pos < 0 || pos > debug->len) ? -EINVAL : (file->f_pos = pos); } -- cgit v1.2.3 From 3bf74b1aecdce719f1445200d5db7dfee2297bba Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 17 Jun 2013 12:09:57 -0700 Subject: vxlan: fix race between flush and incoming learning It is possible for a packet to arrive during vxlan_stop(), and have a dynamic entry created. Close this by checking if device is up. CPU1 CPU2 vxlan_stop vxlan_flush hash_lock acquired vxlan_encap_recv vxlan_snoop waiting for hash_lock hash_lock relased vxlan_flush done hash_lock acquired vxlan_fdb_create This is a day-one bug in vxlan goes back to 3.7. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 3b1d2ee7156b..577a069a6dde 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -571,7 +571,6 @@ static void vxlan_snoop(struct net_device *dev, { struct vxlan_dev *vxlan = netdev_priv(dev); struct vxlan_fdb *f; - int err; f = vxlan_find_mac(vxlan, src_mac); if (likely(f)) { @@ -588,12 +587,15 @@ static void vxlan_snoop(struct net_device *dev, } else { /* learned new entry */ spin_lock(&vxlan->hash_lock); - err = vxlan_fdb_create(vxlan, src_mac, src_ip, - NUD_REACHABLE, - NLM_F_EXCL|NLM_F_CREATE, - vxlan->dst_port, - vxlan->default_dst.remote_vni, - 0, NTF_SELF); + + /* close off race between vxlan_flush and incoming packets */ + if (netif_running(dev)) + vxlan_fdb_create(vxlan, src_mac, src_ip, + NUD_REACHABLE, + NLM_F_EXCL|NLM_F_CREATE, + vxlan->dst_port, + vxlan->default_dst.remote_vni, + 0, NTF_SELF); spin_unlock(&vxlan->hash_lock); } } -- cgit v1.2.3 From 26a41ae604381c5cc0caf1c3261ca6b298b5fe69 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 17 Jun 2013 12:09:58 -0700 Subject: vxlan: only migrate dynamic FDB entries Only migrate dynamic forwarding table entries, don't modify static entries. If packet received from incorrect source IP address assume it is an imposter and drop it. This patch applies only to -net, a different patch would be needed for earlier kernels since the NTF_SELF flag was introduced with 3.10. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 577a069a6dde..15a73ec42c64 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -565,8 +565,9 @@ skip: /* Watch incoming packets to learn mapping between Ethernet address * and Tunnel endpoint. + * Return true if packet is bogus and should be droppped. */ -static void vxlan_snoop(struct net_device *dev, +static bool vxlan_snoop(struct net_device *dev, __be32 src_ip, const u8 *src_mac) { struct vxlan_dev *vxlan = netdev_priv(dev); @@ -575,7 +576,11 @@ static void vxlan_snoop(struct net_device *dev, f = vxlan_find_mac(vxlan, src_mac); if (likely(f)) { if (likely(f->remote.remote_ip == src_ip)) - return; + return false; + + /* Don't migrate static entries, drop packets */ + if (!(f->flags & NTF_SELF)) + return true; if (net_ratelimit()) netdev_info(dev, @@ -598,6 +603,8 @@ static void vxlan_snoop(struct net_device *dev, 0, NTF_SELF); spin_unlock(&vxlan->hash_lock); } + + return false; } @@ -729,8 +736,9 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb) vxlan->dev->dev_addr) == 0) goto drop; - if (vxlan->flags & VXLAN_F_LEARN) - vxlan_snoop(skb->dev, oip->saddr, eth_hdr(skb)->h_source); + if ((vxlan->flags & VXLAN_F_LEARN) && + vxlan_snoop(skb->dev, oip->saddr, eth_hdr(skb)->h_source)) + goto drop; __skb_tunnel_rx(skb, vxlan->dev); skb_reset_network_header(skb); -- cgit v1.2.3 From 7aa27238417a34ec9be2d8eff05ceff319f2d39b Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 17 Jun 2013 12:09:59 -0700 Subject: vxlan: handle skb_clone failure If skb_clone fails if out of memory then just skip the fanout. Problem was introduced in 3.10 with: commit 6681712d67eef14c4ce793561c3231659153a320 Author: David Stevens Date: Fri Mar 15 04:35:51 2013 +0000 vxlan: generalize forwarding tables Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 15a73ec42c64..dda997a0102c 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1161,9 +1161,11 @@ static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev) struct sk_buff *skb1; skb1 = skb_clone(skb, GFP_ATOMIC); - rc1 = vxlan_xmit_one(skb1, dev, rdst, did_rsc); - if (rc == NETDEV_TX_OK) - rc = rc1; + if (skb1) { + rc1 = vxlan_xmit_one(skb1, dev, rdst, did_rsc); + if (rc == NETDEV_TX_OK) + rc = rc1; + } } rc1 = vxlan_xmit_one(skb, dev, rdst0, did_rsc); -- cgit v1.2.3 From 93725cbd22ed716bea8dc479b4925d40a4dbd0c6 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Mon, 17 Jun 2013 15:36:49 -0700 Subject: Fix the VLAN_TAG_PRESENT in netvsc_recv_callback() We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: Olaf Hering Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index ab2307b5d9a7..4dccead586be 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -285,7 +285,9 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb->protocol = eth_type_trans(skb, net); skb->ip_summed = CHECKSUM_NONE; - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), packet->vlan_tci); + if (packet->vlan_tci & VLAN_TAG_PRESENT) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + packet->vlan_tci); net->stats.rx_packets++; net->stats.rx_bytes += packet->total_data_buflen; -- cgit v1.2.3 From ab69bde6b2e9c37456eeb0051a185446336aef9f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 Jun 2013 22:44:02 +0200 Subject: alx: add a simple AR816x/AR817x device driver This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/Kconfig | 18 + drivers/net/ethernet/atheros/Makefile | 1 + drivers/net/ethernet/atheros/alx/Makefile | 3 + drivers/net/ethernet/atheros/alx/alx.h | 114 ++ drivers/net/ethernet/atheros/alx/ethtool.c | 272 +++++ drivers/net/ethernet/atheros/alx/hw.c | 1226 +++++++++++++++++++++ drivers/net/ethernet/atheros/alx/hw.h | 499 +++++++++ drivers/net/ethernet/atheros/alx/main.c | 1625 ++++++++++++++++++++++++++++ drivers/net/ethernet/atheros/alx/reg.h | 810 ++++++++++++++ 9 files changed, 4568 insertions(+) create mode 100644 drivers/net/ethernet/atheros/alx/Makefile create mode 100644 drivers/net/ethernet/atheros/alx/alx.h create mode 100644 drivers/net/ethernet/atheros/alx/ethtool.c create mode 100644 drivers/net/ethernet/atheros/alx/hw.c create mode 100644 drivers/net/ethernet/atheros/alx/hw.h create mode 100644 drivers/net/ethernet/atheros/alx/main.c create mode 100644 drivers/net/ethernet/atheros/alx/reg.h (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig index 36d6abd1cfff..ad6aa1e98348 100644 --- a/drivers/net/ethernet/atheros/Kconfig +++ b/drivers/net/ethernet/atheros/Kconfig @@ -67,4 +67,22 @@ config ATL1C To compile this driver as a module, choose M here. The module will be called atl1c. +config ALX + tristate "Qualcomm Atheros AR816x/AR817x support" + depends on PCI + select CRC32 + select NET_CORE + select MDIO + help + This driver supports the Qualcomm Atheros L1F ethernet adapter, + i.e. the following chipsets: + + 1969:1091 - AR8161 Gigabit Ethernet + 1969:1090 - AR8162 Fast Ethernet + 1969:10A1 - AR8171 Gigabit Ethernet + 1969:10A0 - AR8172 Fast Ethernet + + To compile this driver as a module, choose M here. The module + will be called alx. + endif # NET_VENDOR_ATHEROS diff --git a/drivers/net/ethernet/atheros/Makefile b/drivers/net/ethernet/atheros/Makefile index e7e76fb576ff..5cf1c65bbce9 100644 --- a/drivers/net/ethernet/atheros/Makefile +++ b/drivers/net/ethernet/atheros/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_ATL1) += atlx/ obj-$(CONFIG_ATL2) += atlx/ obj-$(CONFIG_ATL1E) += atl1e/ obj-$(CONFIG_ATL1C) += atl1c/ +obj-$(CONFIG_ALX) += alx/ diff --git a/drivers/net/ethernet/atheros/alx/Makefile b/drivers/net/ethernet/atheros/alx/Makefile new file mode 100644 index 000000000000..5901fa407d52 --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ALX) += alx.o +alx-objs := main.o ethtool.o hw.o +ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/ethernet/atheros/alx/alx.h b/drivers/net/ethernet/atheros/alx/alx.h new file mode 100644 index 000000000000..50b3ae2b143d --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/alx.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ALX_H_ +#define _ALX_H_ + +#include +#include +#include +#include +#include "hw.h" + +#define ALX_WATCHDOG_TIME (5 * HZ) + +struct alx_buffer { + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(size); +}; + +struct alx_rx_queue { + struct alx_rrd *rrd; + dma_addr_t rrd_dma; + + struct alx_rfd *rfd; + dma_addr_t rfd_dma; + + struct alx_buffer *bufs; + + u16 write_idx, read_idx; + u16 rrd_read_idx; +}; +#define ALX_RX_ALLOC_THRESH 32 + +struct alx_tx_queue { + struct alx_txd *tpd; + dma_addr_t tpd_dma; + struct alx_buffer *bufs; + u16 write_idx, read_idx; +}; + +#define ALX_DEFAULT_TX_WORK 128 + +enum alx_device_quirks { + ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG = BIT(0), +}; + +struct alx_priv { + struct net_device *dev; + + struct alx_hw hw; + + /* all descriptor memory */ + struct { + dma_addr_t dma; + void *virt; + int size; + } descmem; + + /* protect int_mask updates */ + spinlock_t irq_lock; + u32 int_mask; + + int tx_ringsz; + int rx_ringsz; + int rxbuf_size; + + struct napi_struct napi; + struct alx_tx_queue txq; + struct alx_rx_queue rxq; + + struct work_struct link_check_wk; + struct work_struct reset_wk; + + u16 msg_enable; + + bool msi; +}; + +extern const struct ethtool_ops alx_ethtool_ops; +extern const char alx_drv_name[]; + +#endif diff --git a/drivers/net/ethernet/atheros/alx/ethtool.c b/drivers/net/ethernet/atheros/alx/ethtool.c new file mode 100644 index 000000000000..6fa2aec2bc81 --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/ethtool.c @@ -0,0 +1,272 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "alx.h" +#include "reg.h" +#include "hw.h" + + +static int alx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + + ecmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_Pause; + if (alx_hw_giga(hw)) + ecmd->supported |= SUPPORTED_1000baseT_Full; + + ecmd->advertising = ADVERTISED_TP; + if (hw->adv_cfg & ADVERTISED_Autoneg) + ecmd->advertising |= hw->adv_cfg; + + ecmd->port = PORT_TP; + ecmd->phy_address = 0; + if (hw->adv_cfg & ADVERTISED_Autoneg) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; + ecmd->transceiver = XCVR_INTERNAL; + + if (hw->flowctrl & ALX_FC_ANEG && hw->adv_cfg & ADVERTISED_Autoneg) { + if (hw->flowctrl & ALX_FC_RX) { + ecmd->advertising |= ADVERTISED_Pause; + + if (!(hw->flowctrl & ALX_FC_TX)) + ecmd->advertising |= ADVERTISED_Asym_Pause; + } else if (hw->flowctrl & ALX_FC_TX) { + ecmd->advertising |= ADVERTISED_Asym_Pause; + } + } + + if (hw->link_speed != SPEED_UNKNOWN) { + ethtool_cmd_speed_set(ecmd, + hw->link_speed - hw->link_speed % 10); + ecmd->duplex = hw->link_speed % 10; + } else { + ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN); + ecmd->duplex = DUPLEX_UNKNOWN; + } + + return 0; +} + +static int alx_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + u32 adv_cfg; + + ASSERT_RTNL(); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + if (ecmd->advertising & ADVERTISED_1000baseT_Half) + return -EINVAL; + adv_cfg = ecmd->advertising | ADVERTISED_Autoneg; + } else { + int speed = ethtool_cmd_speed(ecmd); + + switch (speed + ecmd->duplex) { + case SPEED_10 + DUPLEX_HALF: + adv_cfg = ADVERTISED_10baseT_Half; + break; + case SPEED_10 + DUPLEX_FULL: + adv_cfg = ADVERTISED_10baseT_Full; + break; + case SPEED_100 + DUPLEX_HALF: + adv_cfg = ADVERTISED_100baseT_Half; + break; + case SPEED_100 + DUPLEX_FULL: + adv_cfg = ADVERTISED_100baseT_Full; + break; + default: + return -EINVAL; + } + } + + hw->adv_cfg = adv_cfg; + return alx_setup_speed_duplex(hw, adv_cfg, hw->flowctrl); +} + +static void alx_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + + if (hw->flowctrl & ALX_FC_ANEG && + hw->adv_cfg & ADVERTISED_Autoneg) + pause->autoneg = AUTONEG_ENABLE; + else + pause->autoneg = AUTONEG_DISABLE; + + if (hw->flowctrl & ALX_FC_TX) + pause->tx_pause = 1; + else + pause->tx_pause = 0; + + if (hw->flowctrl & ALX_FC_RX) + pause->rx_pause = 1; + else + pause->rx_pause = 0; +} + + +static int alx_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + int err = 0; + bool reconfig_phy = false; + u8 fc = 0; + + if (pause->tx_pause) + fc |= ALX_FC_TX; + if (pause->rx_pause) + fc |= ALX_FC_RX; + if (pause->autoneg) + fc |= ALX_FC_ANEG; + + ASSERT_RTNL(); + + /* restart auto-neg for auto-mode */ + if (hw->adv_cfg & ADVERTISED_Autoneg) { + if (!((fc ^ hw->flowctrl) & ALX_FC_ANEG)) + reconfig_phy = true; + if (fc & hw->flowctrl & ALX_FC_ANEG && + (fc ^ hw->flowctrl) & (ALX_FC_RX | ALX_FC_TX)) + reconfig_phy = true; + } + + if (reconfig_phy) { + err = alx_setup_speed_duplex(hw, hw->adv_cfg, fc); + return err; + } + + /* flow control on mac */ + if ((fc ^ hw->flowctrl) & (ALX_FC_RX | ALX_FC_TX)) + alx_cfg_mac_flowcontrol(hw, fc); + + hw->flowctrl = fc; + + return 0; +} + +static u32 alx_get_msglevel(struct net_device *netdev) +{ + struct alx_priv *alx = netdev_priv(netdev); + + return alx->msg_enable; +} + +static void alx_set_msglevel(struct net_device *netdev, u32 data) +{ + struct alx_priv *alx = netdev_priv(netdev); + + alx->msg_enable = data; +} + +static void alx_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + + wol->supported = WAKE_MAGIC | WAKE_PHY; + wol->wolopts = 0; + + if (hw->sleep_ctrl & ALX_SLEEP_WOL_MAGIC) + wol->wolopts |= WAKE_MAGIC; + if (hw->sleep_ctrl & ALX_SLEEP_WOL_PHY) + wol->wolopts |= WAKE_PHY; +} + +static int alx_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE | + WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)) + return -EOPNOTSUPP; + + hw->sleep_ctrl = 0; + + if (wol->wolopts & WAKE_MAGIC) + hw->sleep_ctrl |= ALX_SLEEP_WOL_MAGIC; + if (wol->wolopts & WAKE_PHY) + hw->sleep_ctrl |= ALX_SLEEP_WOL_PHY; + + device_set_wakeup_enable(&alx->hw.pdev->dev, hw->sleep_ctrl); + + return 0; +} + +static void alx_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct alx_priv *alx = netdev_priv(netdev); + + strlcpy(drvinfo->driver, alx_drv_name, sizeof(drvinfo->driver)); + strlcpy(drvinfo->bus_info, pci_name(alx->hw.pdev), + sizeof(drvinfo->bus_info)); +} + +const struct ethtool_ops alx_ethtool_ops = { + .get_settings = alx_get_settings, + .set_settings = alx_set_settings, + .get_pauseparam = alx_get_pauseparam, + .set_pauseparam = alx_set_pauseparam, + .get_drvinfo = alx_get_drvinfo, + .get_msglevel = alx_get_msglevel, + .set_msglevel = alx_set_msglevel, + .get_wol = alx_get_wol, + .set_wol = alx_set_wol, + .get_link = ethtool_op_get_link, +}; diff --git a/drivers/net/ethernet/atheros/alx/hw.c b/drivers/net/ethernet/atheros/alx/hw.c new file mode 100644 index 000000000000..220a16ad0e49 --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/hw.c @@ -0,0 +1,1226 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include +#include +#include +#include +#include "reg.h" +#include "hw.h" + +static inline bool alx_is_rev_a(u8 rev) +{ + return rev == ALX_REV_A0 || rev == ALX_REV_A1; +} + +static int alx_wait_mdio_idle(struct alx_hw *hw) +{ + u32 val; + int i; + + for (i = 0; i < ALX_MDIO_MAX_AC_TO; i++) { + val = alx_read_mem32(hw, ALX_MDIO); + if (!(val & ALX_MDIO_BUSY)) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +static int alx_read_phy_core(struct alx_hw *hw, bool ext, u8 dev, + u16 reg, u16 *phy_data) +{ + u32 val, clk_sel; + int err; + + *phy_data = 0; + + /* use slow clock when it's in hibernation status */ + clk_sel = hw->link_speed != SPEED_UNKNOWN ? + ALX_MDIO_CLK_SEL_25MD4 : + ALX_MDIO_CLK_SEL_25MD128; + + if (ext) { + val = dev << ALX_MDIO_EXTN_DEVAD_SHIFT | + reg << ALX_MDIO_EXTN_REG_SHIFT; + alx_write_mem32(hw, ALX_MDIO_EXTN, val); + + val = ALX_MDIO_SPRES_PRMBL | ALX_MDIO_START | + ALX_MDIO_MODE_EXT | ALX_MDIO_OP_READ | + clk_sel << ALX_MDIO_CLK_SEL_SHIFT; + } else { + val = ALX_MDIO_SPRES_PRMBL | + clk_sel << ALX_MDIO_CLK_SEL_SHIFT | + reg << ALX_MDIO_REG_SHIFT | + ALX_MDIO_START | ALX_MDIO_OP_READ; + } + alx_write_mem32(hw, ALX_MDIO, val); + + err = alx_wait_mdio_idle(hw); + if (err) + return err; + val = alx_read_mem32(hw, ALX_MDIO); + *phy_data = ALX_GET_FIELD(val, ALX_MDIO_DATA); + return 0; +} + +static int alx_write_phy_core(struct alx_hw *hw, bool ext, u8 dev, + u16 reg, u16 phy_data) +{ + u32 val, clk_sel; + + /* use slow clock when it's in hibernation status */ + clk_sel = hw->link_speed != SPEED_UNKNOWN ? + ALX_MDIO_CLK_SEL_25MD4 : + ALX_MDIO_CLK_SEL_25MD128; + + if (ext) { + val = dev << ALX_MDIO_EXTN_DEVAD_SHIFT | + reg << ALX_MDIO_EXTN_REG_SHIFT; + alx_write_mem32(hw, ALX_MDIO_EXTN, val); + + val = ALX_MDIO_SPRES_PRMBL | + clk_sel << ALX_MDIO_CLK_SEL_SHIFT | + phy_data << ALX_MDIO_DATA_SHIFT | + ALX_MDIO_START | ALX_MDIO_MODE_EXT; + } else { + val = ALX_MDIO_SPRES_PRMBL | + clk_sel << ALX_MDIO_CLK_SEL_SHIFT | + reg << ALX_MDIO_REG_SHIFT | + phy_data << ALX_MDIO_DATA_SHIFT | + ALX_MDIO_START; + } + alx_write_mem32(hw, ALX_MDIO, val); + + return alx_wait_mdio_idle(hw); +} + +static int __alx_read_phy_reg(struct alx_hw *hw, u16 reg, u16 *phy_data) +{ + return alx_read_phy_core(hw, false, 0, reg, phy_data); +} + +static int __alx_write_phy_reg(struct alx_hw *hw, u16 reg, u16 phy_data) +{ + return alx_write_phy_core(hw, false, 0, reg, phy_data); +} + +static int __alx_read_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 *pdata) +{ + return alx_read_phy_core(hw, true, dev, reg, pdata); +} + +static int __alx_write_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 data) +{ + return alx_write_phy_core(hw, true, dev, reg, data); +} + +static int __alx_read_phy_dbg(struct alx_hw *hw, u16 reg, u16 *pdata) +{ + int err; + + err = __alx_write_phy_reg(hw, ALX_MII_DBG_ADDR, reg); + if (err) + return err; + + return __alx_read_phy_reg(hw, ALX_MII_DBG_DATA, pdata); +} + +static int __alx_write_phy_dbg(struct alx_hw *hw, u16 reg, u16 data) +{ + int err; + + err = __alx_write_phy_reg(hw, ALX_MII_DBG_ADDR, reg); + if (err) + return err; + + return __alx_write_phy_reg(hw, ALX_MII_DBG_DATA, data); +} + +int alx_read_phy_reg(struct alx_hw *hw, u16 reg, u16 *phy_data) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_read_phy_reg(hw, reg, phy_data); + spin_unlock(&hw->mdio_lock); + + return err; +} + +int alx_write_phy_reg(struct alx_hw *hw, u16 reg, u16 phy_data) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_write_phy_reg(hw, reg, phy_data); + spin_unlock(&hw->mdio_lock); + + return err; +} + +int alx_read_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 *pdata) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_read_phy_ext(hw, dev, reg, pdata); + spin_unlock(&hw->mdio_lock); + + return err; +} + +int alx_write_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 data) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_write_phy_ext(hw, dev, reg, data); + spin_unlock(&hw->mdio_lock); + + return err; +} + +static int alx_read_phy_dbg(struct alx_hw *hw, u16 reg, u16 *pdata) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_read_phy_dbg(hw, reg, pdata); + spin_unlock(&hw->mdio_lock); + + return err; +} + +static int alx_write_phy_dbg(struct alx_hw *hw, u16 reg, u16 data) +{ + int err; + + spin_lock(&hw->mdio_lock); + err = __alx_write_phy_dbg(hw, reg, data); + spin_unlock(&hw->mdio_lock); + + return err; +} + +static u16 alx_get_phy_config(struct alx_hw *hw) +{ + u32 val; + u16 phy_val; + + val = alx_read_mem32(hw, ALX_PHY_CTRL); + /* phy in reset */ + if ((val & ALX_PHY_CTRL_DSPRST_OUT) == 0) + return ALX_DRV_PHY_UNKNOWN; + + val = alx_read_mem32(hw, ALX_DRV); + val = ALX_GET_FIELD(val, ALX_DRV_PHY); + if (ALX_DRV_PHY_UNKNOWN == val) + return ALX_DRV_PHY_UNKNOWN; + + alx_read_phy_reg(hw, ALX_MII_DBG_ADDR, &phy_val); + if (ALX_PHY_INITED == phy_val) + return val; + + return ALX_DRV_PHY_UNKNOWN; +} + +static bool alx_wait_reg(struct alx_hw *hw, u32 reg, u32 wait, u32 *val) +{ + u32 read; + int i; + + for (i = 0; i < ALX_SLD_MAX_TO; i++) { + read = alx_read_mem32(hw, reg); + if ((read & wait) == 0) { + if (val) + *val = read; + return true; + } + mdelay(1); + } + + return false; +} + +static bool alx_read_macaddr(struct alx_hw *hw, u8 *addr) +{ + u32 mac0, mac1; + + mac0 = alx_read_mem32(hw, ALX_STAD0); + mac1 = alx_read_mem32(hw, ALX_STAD1); + + /* addr should be big-endian */ + *(__be32 *)(addr + 2) = cpu_to_be32(mac0); + *(__be16 *)addr = cpu_to_be16(mac1); + + return is_valid_ether_addr(addr); +} + +int alx_get_perm_macaddr(struct alx_hw *hw, u8 *addr) +{ + u32 val; + + /* try to get it from register first */ + if (alx_read_macaddr(hw, addr)) + return 0; + + /* try to load from efuse */ + if (!alx_wait_reg(hw, ALX_SLD, ALX_SLD_STAT | ALX_SLD_START, &val)) + return -EIO; + alx_write_mem32(hw, ALX_SLD, val | ALX_SLD_START); + if (!alx_wait_reg(hw, ALX_SLD, ALX_SLD_START, NULL)) + return -EIO; + if (alx_read_macaddr(hw, addr)) + return 0; + + /* try to load from flash/eeprom (if present) */ + val = alx_read_mem32(hw, ALX_EFLD); + if (val & (ALX_EFLD_F_EXIST | ALX_EFLD_E_EXIST)) { + if (!alx_wait_reg(hw, ALX_EFLD, + ALX_EFLD_STAT | ALX_EFLD_START, &val)) + return -EIO; + alx_write_mem32(hw, ALX_EFLD, val | ALX_EFLD_START); + if (!alx_wait_reg(hw, ALX_EFLD, ALX_EFLD_START, NULL)) + return -EIO; + if (alx_read_macaddr(hw, addr)) + return 0; + } + + return -EIO; +} + +void alx_set_macaddr(struct alx_hw *hw, const u8 *addr) +{ + u32 val; + + /* for example: 00-0B-6A-F6-00-DC * STAD0=6AF600DC, STAD1=000B */ + val = be32_to_cpu(*(__be32 *)(addr + 2)); + alx_write_mem32(hw, ALX_STAD0, val); + val = be16_to_cpu(*(__be16 *)addr); + alx_write_mem32(hw, ALX_STAD1, val); +} + +static void alx_enable_osc(struct alx_hw *hw) +{ + u32 val; + + /* rising edge */ + val = alx_read_mem32(hw, ALX_MISC); + alx_write_mem32(hw, ALX_MISC, val & ~ALX_MISC_INTNLOSC_OPEN); + alx_write_mem32(hw, ALX_MISC, val | ALX_MISC_INTNLOSC_OPEN); +} + +static void alx_reset_osc(struct alx_hw *hw, u8 rev) +{ + u32 val, val2; + + /* clear Internal OSC settings, switching OSC by hw itself */ + val = alx_read_mem32(hw, ALX_MISC3); + alx_write_mem32(hw, ALX_MISC3, + (val & ~ALX_MISC3_25M_BY_SW) | + ALX_MISC3_25M_NOTO_INTNL); + + /* 25M clk from chipset may be unstable 1s after de-assert of + * PERST, driver need re-calibrate before enter Sleep for WoL + */ + val = alx_read_mem32(hw, ALX_MISC); + if (rev >= ALX_REV_B0) { + /* restore over current protection def-val, + * this val could be reset by MAC-RST + */ + ALX_SET_FIELD(val, ALX_MISC_PSW_OCP, ALX_MISC_PSW_OCP_DEF); + /* a 0->1 change will update the internal val of osc */ + val &= ~ALX_MISC_INTNLOSC_OPEN; + alx_write_mem32(hw, ALX_MISC, val); + alx_write_mem32(hw, ALX_MISC, val | ALX_MISC_INTNLOSC_OPEN); + /* hw will automatically dis OSC after cab. */ + val2 = alx_read_mem32(hw, ALX_MSIC2); + val2 &= ~ALX_MSIC2_CALB_START; + alx_write_mem32(hw, ALX_MSIC2, val2); + alx_write_mem32(hw, ALX_MSIC2, val2 | ALX_MSIC2_CALB_START); + } else { + val &= ~ALX_MISC_INTNLOSC_OPEN; + /* disable isolate for rev A devices */ + if (alx_is_rev_a(rev)) + val &= ~ALX_MISC_ISO_EN; + + alx_write_mem32(hw, ALX_MISC, val | ALX_MISC_INTNLOSC_OPEN); + alx_write_mem32(hw, ALX_MISC, val); + } + + udelay(20); +} + +static int alx_stop_mac(struct alx_hw *hw) +{ + u32 rxq, txq, val; + u16 i; + + rxq = alx_read_mem32(hw, ALX_RXQ0); + alx_write_mem32(hw, ALX_RXQ0, rxq & ~ALX_RXQ0_EN); + txq = alx_read_mem32(hw, ALX_TXQ0); + alx_write_mem32(hw, ALX_TXQ0, txq & ~ALX_TXQ0_EN); + + udelay(40); + + hw->rx_ctrl &= ~(ALX_MAC_CTRL_RX_EN | ALX_MAC_CTRL_TX_EN); + alx_write_mem32(hw, ALX_MAC_CTRL, hw->rx_ctrl); + + for (i = 0; i < ALX_DMA_MAC_RST_TO; i++) { + val = alx_read_mem32(hw, ALX_MAC_STS); + if (!(val & ALX_MAC_STS_IDLE)) + return 0; + udelay(10); + } + + return -ETIMEDOUT; +} + +int alx_reset_mac(struct alx_hw *hw) +{ + u32 val, pmctrl; + int i, ret; + u8 rev; + bool a_cr; + + pmctrl = 0; + rev = alx_hw_revision(hw); + a_cr = alx_is_rev_a(rev) && alx_hw_with_cr(hw); + + /* disable all interrupts, RXQ/TXQ */ + alx_write_mem32(hw, ALX_MSIX_MASK, 0xFFFFFFFF); + alx_write_mem32(hw, ALX_IMR, 0); + alx_write_mem32(hw, ALX_ISR, ALX_ISR_DIS); + + ret = alx_stop_mac(hw); + if (ret) + return ret; + + /* mac reset workaroud */ + alx_write_mem32(hw, ALX_RFD_PIDX, 1); + + /* dis l0s/l1 before mac reset */ + if (a_cr) { + pmctrl = alx_read_mem32(hw, ALX_PMCTRL); + if (pmctrl & (ALX_PMCTRL_L1_EN | ALX_PMCTRL_L0S_EN)) + alx_write_mem32(hw, ALX_PMCTRL, + pmctrl & ~(ALX_PMCTRL_L1_EN | + ALX_PMCTRL_L0S_EN)); + } + + /* reset whole mac safely */ + val = alx_read_mem32(hw, ALX_MASTER); + alx_write_mem32(hw, ALX_MASTER, + val | ALX_MASTER_DMA_MAC_RST | ALX_MASTER_OOB_DIS); + + /* make sure it's real idle */ + udelay(10); + for (i = 0; i < ALX_DMA_MAC_RST_TO; i++) { + val = alx_read_mem32(hw, ALX_RFD_PIDX); + if (val == 0) + break; + udelay(10); + } + for (; i < ALX_DMA_MAC_RST_TO; i++) { + val = alx_read_mem32(hw, ALX_MASTER); + if ((val & ALX_MASTER_DMA_MAC_RST) == 0) + break; + udelay(10); + } + if (i == ALX_DMA_MAC_RST_TO) + return -EIO; + udelay(10); + + if (a_cr) { + alx_write_mem32(hw, ALX_MASTER, val | ALX_MASTER_PCLKSEL_SRDS); + /* restore l0s / l1 */ + if (pmctrl & (ALX_PMCTRL_L1_EN | ALX_PMCTRL_L0S_EN)) + alx_write_mem32(hw, ALX_PMCTRL, pmctrl); + } + + alx_reset_osc(hw, rev); + + /* clear Internal OSC settings, switching OSC by hw itself, + * disable isolate for rev A devices + */ + val = alx_read_mem32(hw, ALX_MISC3); + alx_write_mem32(hw, ALX_MISC3, + (val & ~ALX_MISC3_25M_BY_SW) | + ALX_MISC3_25M_NOTO_INTNL); + val = alx_read_mem32(hw, ALX_MISC); + val &= ~ALX_MISC_INTNLOSC_OPEN; + if (alx_is_rev_a(rev)) + val &= ~ALX_MISC_ISO_EN; + alx_write_mem32(hw, ALX_MISC, val); + udelay(20); + + /* driver control speed/duplex, hash-alg */ + alx_write_mem32(hw, ALX_MAC_CTRL, hw->rx_ctrl); + + val = alx_read_mem32(hw, ALX_SERDES); + alx_write_mem32(hw, ALX_SERDES, + val | ALX_SERDES_MACCLK_SLWDWN | + ALX_SERDES_PHYCLK_SLWDWN); + + return 0; +} + +void alx_reset_phy(struct alx_hw *hw) +{ + int i; + u32 val; + u16 phy_val; + + /* (DSP)reset PHY core */ + val = alx_read_mem32(hw, ALX_PHY_CTRL); + val &= ~(ALX_PHY_CTRL_DSPRST_OUT | ALX_PHY_CTRL_IDDQ | + ALX_PHY_CTRL_GATE_25M | ALX_PHY_CTRL_POWER_DOWN | + ALX_PHY_CTRL_CLS); + val |= ALX_PHY_CTRL_RST_ANALOG; + + val |= (ALX_PHY_CTRL_HIB_PULSE | ALX_PHY_CTRL_HIB_EN); + alx_write_mem32(hw, ALX_PHY_CTRL, val); + udelay(10); + alx_write_mem32(hw, ALX_PHY_CTRL, val | ALX_PHY_CTRL_DSPRST_OUT); + + for (i = 0; i < ALX_PHY_CTRL_DSPRST_TO; i++) + udelay(10); + + /* phy power saving & hib */ + alx_write_phy_dbg(hw, ALX_MIIDBG_LEGCYPS, ALX_LEGCYPS_DEF); + alx_write_phy_dbg(hw, ALX_MIIDBG_SYSMODCTRL, + ALX_SYSMODCTRL_IECHOADJ_DEF); + alx_write_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_VDRVBIAS, + ALX_VDRVBIAS_DEF); + + /* EEE advertisement */ + val = alx_read_mem32(hw, ALX_LPI_CTRL); + alx_write_mem32(hw, ALX_LPI_CTRL, val & ~ALX_LPI_CTRL_EN); + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_LOCAL_EEEADV, 0); + + /* phy power saving */ + alx_write_phy_dbg(hw, ALX_MIIDBG_TST10BTCFG, ALX_TST10BTCFG_DEF); + alx_write_phy_dbg(hw, ALX_MIIDBG_SRDSYSMOD, ALX_SRDSYSMOD_DEF); + alx_write_phy_dbg(hw, ALX_MIIDBG_TST100BTCFG, ALX_TST100BTCFG_DEF); + alx_write_phy_dbg(hw, ALX_MIIDBG_ANACTRL, ALX_ANACTRL_DEF); + alx_read_phy_dbg(hw, ALX_MIIDBG_GREENCFG2, &phy_val); + alx_write_phy_dbg(hw, ALX_MIIDBG_GREENCFG2, + phy_val & ~ALX_GREENCFG2_GATE_DFSE_EN); + /* rtl8139c, 120m issue */ + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_NLP78, + ALX_MIIEXT_NLP78_120M_DEF); + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_S3DIG10, + ALX_MIIEXT_S3DIG10_DEF); + + if (hw->lnk_patch) { + /* Turn off half amplitude */ + alx_read_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_CLDCTRL3, + &phy_val); + alx_write_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_CLDCTRL3, + phy_val | ALX_CLDCTRL3_BP_CABLE1TH_DET_GT); + /* Turn off Green feature */ + alx_read_phy_dbg(hw, ALX_MIIDBG_GREENCFG2, &phy_val); + alx_write_phy_dbg(hw, ALX_MIIDBG_GREENCFG2, + phy_val | ALX_GREENCFG2_BP_GREEN); + /* Turn off half Bias */ + alx_read_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_CLDCTRL5, + &phy_val); + alx_write_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_CLDCTRL5, + phy_val | ALX_CLDCTRL5_BP_VD_HLFBIAS); + } + + /* set phy interrupt mask */ + alx_write_phy_reg(hw, ALX_MII_IER, ALX_IER_LINK_UP | ALX_IER_LINK_DOWN); +} + +#define ALX_PCI_CMD (PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO) + +void alx_reset_pcie(struct alx_hw *hw) +{ + u8 rev = alx_hw_revision(hw); + u32 val; + u16 val16; + + /* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */ + pci_read_config_word(hw->pdev, PCI_COMMAND, &val16); + if (!(val16 & ALX_PCI_CMD) || (val16 & PCI_COMMAND_INTX_DISABLE)) { + val16 = (val16 | ALX_PCI_CMD) & ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(hw->pdev, PCI_COMMAND, val16); + } + + /* clear WoL setting/status */ + val = alx_read_mem32(hw, ALX_WOL0); + alx_write_mem32(hw, ALX_WOL0, 0); + + val = alx_read_mem32(hw, ALX_PDLL_TRNS1); + alx_write_mem32(hw, ALX_PDLL_TRNS1, val & ~ALX_PDLL_TRNS1_D3PLLOFF_EN); + + /* mask some pcie error bits */ + val = alx_read_mem32(hw, ALX_UE_SVRT); + val &= ~(ALX_UE_SVRT_DLPROTERR | ALX_UE_SVRT_FCPROTERR); + alx_write_mem32(hw, ALX_UE_SVRT, val); + + /* wol 25M & pclk */ + val = alx_read_mem32(hw, ALX_MASTER); + if (alx_is_rev_a(rev) && alx_hw_with_cr(hw)) { + if ((val & ALX_MASTER_WAKEN_25M) == 0 || + (val & ALX_MASTER_PCLKSEL_SRDS) == 0) + alx_write_mem32(hw, ALX_MASTER, + val | ALX_MASTER_PCLKSEL_SRDS | + ALX_MASTER_WAKEN_25M); + } else { + if ((val & ALX_MASTER_WAKEN_25M) == 0 || + (val & ALX_MASTER_PCLKSEL_SRDS) != 0) + alx_write_mem32(hw, ALX_MASTER, + (val & ~ALX_MASTER_PCLKSEL_SRDS) | + ALX_MASTER_WAKEN_25M); + } + + /* ASPM setting */ + alx_enable_aspm(hw, true, true); + + udelay(10); +} + +void alx_start_mac(struct alx_hw *hw) +{ + u32 mac, txq, rxq; + + rxq = alx_read_mem32(hw, ALX_RXQ0); + alx_write_mem32(hw, ALX_RXQ0, rxq | ALX_RXQ0_EN); + txq = alx_read_mem32(hw, ALX_TXQ0); + alx_write_mem32(hw, ALX_TXQ0, txq | ALX_TXQ0_EN); + + mac = hw->rx_ctrl; + if (hw->link_speed % 10 == DUPLEX_FULL) + mac |= ALX_MAC_CTRL_FULLD; + else + mac &= ~ALX_MAC_CTRL_FULLD; + ALX_SET_FIELD(mac, ALX_MAC_CTRL_SPEED, + hw->link_speed >= SPEED_1000 ? ALX_MAC_CTRL_SPEED_1000 : + ALX_MAC_CTRL_SPEED_10_100); + mac |= ALX_MAC_CTRL_TX_EN | ALX_MAC_CTRL_RX_EN; + hw->rx_ctrl = mac; + alx_write_mem32(hw, ALX_MAC_CTRL, mac); +} + +void alx_cfg_mac_flowcontrol(struct alx_hw *hw, u8 fc) +{ + if (fc & ALX_FC_RX) + hw->rx_ctrl |= ALX_MAC_CTRL_RXFC_EN; + else + hw->rx_ctrl &= ~ALX_MAC_CTRL_RXFC_EN; + + if (fc & ALX_FC_TX) + hw->rx_ctrl |= ALX_MAC_CTRL_TXFC_EN; + else + hw->rx_ctrl &= ~ALX_MAC_CTRL_TXFC_EN; + + alx_write_mem32(hw, ALX_MAC_CTRL, hw->rx_ctrl); +} + +void alx_enable_aspm(struct alx_hw *hw, bool l0s_en, bool l1_en) +{ + u32 pmctrl; + u8 rev = alx_hw_revision(hw); + + pmctrl = alx_read_mem32(hw, ALX_PMCTRL); + + ALX_SET_FIELD(pmctrl, ALX_PMCTRL_LCKDET_TIMER, + ALX_PMCTRL_LCKDET_TIMER_DEF); + pmctrl |= ALX_PMCTRL_RCVR_WT_1US | + ALX_PMCTRL_L1_CLKSW_EN | + ALX_PMCTRL_L1_SRDSRX_PWD; + ALX_SET_FIELD(pmctrl, ALX_PMCTRL_L1REQ_TO, ALX_PMCTRL_L1REG_TO_DEF); + ALX_SET_FIELD(pmctrl, ALX_PMCTRL_L1_TIMER, ALX_PMCTRL_L1_TIMER_16US); + pmctrl &= ~(ALX_PMCTRL_L1_SRDS_EN | + ALX_PMCTRL_L1_SRDSPLL_EN | + ALX_PMCTRL_L1_BUFSRX_EN | + ALX_PMCTRL_SADLY_EN | + ALX_PMCTRL_HOTRST_WTEN| + ALX_PMCTRL_L0S_EN | + ALX_PMCTRL_L1_EN | + ALX_PMCTRL_ASPM_FCEN | + ALX_PMCTRL_TXL1_AFTER_L0S | + ALX_PMCTRL_RXL1_AFTER_L0S); + if (alx_is_rev_a(rev) && alx_hw_with_cr(hw)) + pmctrl |= ALX_PMCTRL_L1_SRDS_EN | ALX_PMCTRL_L1_SRDSPLL_EN; + + if (l0s_en) + pmctrl |= (ALX_PMCTRL_L0S_EN | ALX_PMCTRL_ASPM_FCEN); + if (l1_en) + pmctrl |= (ALX_PMCTRL_L1_EN | ALX_PMCTRL_ASPM_FCEN); + + alx_write_mem32(hw, ALX_PMCTRL, pmctrl); +} + + +static u32 ethadv_to_hw_cfg(struct alx_hw *hw, u32 ethadv_cfg) +{ + u32 cfg = 0; + + if (ethadv_cfg & ADVERTISED_Autoneg) { + cfg |= ALX_DRV_PHY_AUTO; + if (ethadv_cfg & ADVERTISED_10baseT_Half) + cfg |= ALX_DRV_PHY_10; + if (ethadv_cfg & ADVERTISED_10baseT_Full) + cfg |= ALX_DRV_PHY_10 | ALX_DRV_PHY_DUPLEX; + if (ethadv_cfg & ADVERTISED_100baseT_Half) + cfg |= ALX_DRV_PHY_100; + if (ethadv_cfg & ADVERTISED_100baseT_Full) + cfg |= ALX_DRV_PHY_100 | ALX_DRV_PHY_DUPLEX; + if (ethadv_cfg & ADVERTISED_1000baseT_Half) + cfg |= ALX_DRV_PHY_1000; + if (ethadv_cfg & ADVERTISED_1000baseT_Full) + cfg |= ALX_DRV_PHY_100 | ALX_DRV_PHY_DUPLEX; + if (ethadv_cfg & ADVERTISED_Pause) + cfg |= ADVERTISE_PAUSE_CAP; + if (ethadv_cfg & ADVERTISED_Asym_Pause) + cfg |= ADVERTISE_PAUSE_ASYM; + } else { + switch (ethadv_cfg) { + case ADVERTISED_10baseT_Half: + cfg |= ALX_DRV_PHY_10; + break; + case ADVERTISED_100baseT_Half: + cfg |= ALX_DRV_PHY_100; + break; + case ADVERTISED_10baseT_Full: + cfg |= ALX_DRV_PHY_10 | ALX_DRV_PHY_DUPLEX; + break; + case ADVERTISED_100baseT_Full: + cfg |= ALX_DRV_PHY_100 | ALX_DRV_PHY_DUPLEX; + break; + } + } + + return cfg; +} + +int alx_setup_speed_duplex(struct alx_hw *hw, u32 ethadv, u8 flowctrl) +{ + u16 adv, giga, cr; + u32 val; + int err = 0; + + alx_write_phy_reg(hw, ALX_MII_DBG_ADDR, 0); + val = alx_read_mem32(hw, ALX_DRV); + ALX_SET_FIELD(val, ALX_DRV_PHY, 0); + + if (ethadv & ADVERTISED_Autoneg) { + adv = ADVERTISE_CSMA; + adv |= ethtool_adv_to_mii_adv_t(ethadv); + + if (flowctrl & ALX_FC_ANEG) { + if (flowctrl & ALX_FC_RX) { + adv |= ADVERTISED_Pause; + if (!(flowctrl & ALX_FC_TX)) + adv |= ADVERTISED_Asym_Pause; + } else if (flowctrl & ALX_FC_TX) { + adv |= ADVERTISED_Asym_Pause; + } + } + giga = 0; + if (alx_hw_giga(hw)) + giga = ethtool_adv_to_mii_ctrl1000_t(ethadv); + + cr = BMCR_RESET | BMCR_ANENABLE | BMCR_ANRESTART; + + if (alx_write_phy_reg(hw, MII_ADVERTISE, adv) || + alx_write_phy_reg(hw, MII_CTRL1000, giga) || + alx_write_phy_reg(hw, MII_BMCR, cr)) + err = -EBUSY; + } else { + cr = BMCR_RESET; + if (ethadv == ADVERTISED_100baseT_Half || + ethadv == ADVERTISED_100baseT_Full) + cr |= BMCR_SPEED100; + if (ethadv == ADVERTISED_10baseT_Full || + ethadv == ADVERTISED_100baseT_Full) + cr |= BMCR_FULLDPLX; + + err = alx_write_phy_reg(hw, MII_BMCR, cr); + } + + if (!err) { + alx_write_phy_reg(hw, ALX_MII_DBG_ADDR, ALX_PHY_INITED); + val |= ethadv_to_hw_cfg(hw, ethadv); + } + + alx_write_mem32(hw, ALX_DRV, val); + + return err; +} + + +void alx_post_phy_link(struct alx_hw *hw) +{ + u16 phy_val, len, agc; + u8 revid = alx_hw_revision(hw); + bool adj_th = revid == ALX_REV_B0; + int speed; + + if (hw->link_speed == SPEED_UNKNOWN) + speed = SPEED_UNKNOWN; + else + speed = hw->link_speed - hw->link_speed % 10; + + if (revid != ALX_REV_B0 && !alx_is_rev_a(revid)) + return; + + /* 1000BT/AZ, wrong cable length */ + if (speed != SPEED_UNKNOWN) { + alx_read_phy_ext(hw, ALX_MIIEXT_PCS, ALX_MIIEXT_CLDCTRL6, + &phy_val); + len = ALX_GET_FIELD(phy_val, ALX_CLDCTRL6_CAB_LEN); + alx_read_phy_dbg(hw, ALX_MIIDBG_AGC, &phy_val); + agc = ALX_GET_FIELD(phy_val, ALX_AGC_2_VGA); + + if ((speed == SPEED_1000 && + (len > ALX_CLDCTRL6_CAB_LEN_SHORT1G || + (len == 0 && agc > ALX_AGC_LONG1G_LIMT))) || + (speed == SPEED_100 && + (len > ALX_CLDCTRL6_CAB_LEN_SHORT100M || + (len == 0 && agc > ALX_AGC_LONG100M_LIMT)))) { + alx_write_phy_dbg(hw, ALX_MIIDBG_AZ_ANADECT, + ALX_AZ_ANADECT_LONG); + alx_read_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_AFE, + &phy_val); + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_AFE, + phy_val | ALX_AFE_10BT_100M_TH); + } else { + alx_write_phy_dbg(hw, ALX_MIIDBG_AZ_ANADECT, + ALX_AZ_ANADECT_DEF); + alx_read_phy_ext(hw, ALX_MIIEXT_ANEG, + ALX_MIIEXT_AFE, &phy_val); + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_AFE, + phy_val & ~ALX_AFE_10BT_100M_TH); + } + + /* threshold adjust */ + if (adj_th && hw->lnk_patch) { + if (speed == SPEED_100) { + alx_write_phy_dbg(hw, ALX_MIIDBG_MSE16DB, + ALX_MSE16DB_UP); + } else if (speed == SPEED_1000) { + /* + * Giga link threshold, raise the tolerance of + * noise 50% + */ + alx_read_phy_dbg(hw, ALX_MIIDBG_MSE20DB, + &phy_val); + ALX_SET_FIELD(phy_val, ALX_MSE20DB_TH, + ALX_MSE20DB_TH_HI); + alx_write_phy_dbg(hw, ALX_MIIDBG_MSE20DB, + phy_val); + } + } + } else { + alx_read_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_AFE, + &phy_val); + alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, ALX_MIIEXT_AFE, + phy_val & ~ALX_AFE_10BT_100M_TH); + + if (adj_th && hw->lnk_patch) { + alx_write_phy_dbg(hw, ALX_MIIDBG_MSE16DB, + ALX_MSE16DB_DOWN); + alx_read_phy_dbg(hw, ALX_MIIDBG_MSE20DB, &phy_val); + ALX_SET_FIELD(phy_val, ALX_MSE20DB_TH, + ALX_MSE20DB_TH_DEF); + alx_write_phy_dbg(hw, ALX_MIIDBG_MSE20DB, phy_val); + } + } +} + + +/* NOTE: + * 1. phy link must be established before calling this function + * 2. wol option (pattern,magic,link,etc.) is configed before call it. + */ +int alx_pre_suspend(struct alx_hw *hw, int speed) +{ + u32 master, mac, phy, val; + int err = 0; + + master = alx_read_mem32(hw, ALX_MASTER); + master &= ~ALX_MASTER_PCLKSEL_SRDS; + mac = hw->rx_ctrl; + /* 10/100 half */ + ALX_SET_FIELD(mac, ALX_MAC_CTRL_SPEED, ALX_MAC_CTRL_SPEED_10_100); + mac &= ~(ALX_MAC_CTRL_FULLD | ALX_MAC_CTRL_RX_EN | ALX_MAC_CTRL_TX_EN); + + phy = alx_read_mem32(hw, ALX_PHY_CTRL); + phy &= ~(ALX_PHY_CTRL_DSPRST_OUT | ALX_PHY_CTRL_CLS); + phy |= ALX_PHY_CTRL_RST_ANALOG | ALX_PHY_CTRL_HIB_PULSE | + ALX_PHY_CTRL_HIB_EN; + + /* without any activity */ + if (!(hw->sleep_ctrl & ALX_SLEEP_ACTIVE)) { + err = alx_write_phy_reg(hw, ALX_MII_IER, 0); + if (err) + return err; + phy |= ALX_PHY_CTRL_IDDQ | ALX_PHY_CTRL_POWER_DOWN; + } else { + if (hw->sleep_ctrl & (ALX_SLEEP_WOL_MAGIC | ALX_SLEEP_CIFS)) + mac |= ALX_MAC_CTRL_RX_EN | ALX_MAC_CTRL_BRD_EN; + if (hw->sleep_ctrl & ALX_SLEEP_CIFS) + mac |= ALX_MAC_CTRL_TX_EN; + if (speed % 10 == DUPLEX_FULL) + mac |= ALX_MAC_CTRL_FULLD; + if (speed >= SPEED_1000) + ALX_SET_FIELD(mac, ALX_MAC_CTRL_SPEED, + ALX_MAC_CTRL_SPEED_1000); + phy |= ALX_PHY_CTRL_DSPRST_OUT; + err = alx_write_phy_ext(hw, ALX_MIIEXT_ANEG, + ALX_MIIEXT_S3DIG10, + ALX_MIIEXT_S3DIG10_SL); + if (err) + return err; + } + + alx_enable_osc(hw); + hw->rx_ctrl = mac; + alx_write_mem32(hw, ALX_MASTER, master); + alx_write_mem32(hw, ALX_MAC_CTRL, mac); + alx_write_mem32(hw, ALX_PHY_CTRL, phy); + + /* set val of PDLL D3PLLOFF */ + val = alx_read_mem32(hw, ALX_PDLL_TRNS1); + val |= ALX_PDLL_TRNS1_D3PLLOFF_EN; + alx_write_mem32(hw, ALX_PDLL_TRNS1, val); + + return 0; +} + +bool alx_phy_configured(struct alx_hw *hw) +{ + u32 cfg, hw_cfg; + + cfg = ethadv_to_hw_cfg(hw, hw->adv_cfg); + cfg = ALX_GET_FIELD(cfg, ALX_DRV_PHY); + hw_cfg = alx_get_phy_config(hw); + + if (hw_cfg == ALX_DRV_PHY_UNKNOWN) + return false; + + return cfg == hw_cfg; +} + +int alx_get_phy_link(struct alx_hw *hw, int *speed) +{ + struct pci_dev *pdev = hw->pdev; + u16 bmsr, giga; + int err; + + err = alx_read_phy_reg(hw, MII_BMSR, &bmsr); + if (err) + return err; + + err = alx_read_phy_reg(hw, MII_BMSR, &bmsr); + if (err) + return err; + + if (!(bmsr & BMSR_LSTATUS)) { + *speed = SPEED_UNKNOWN; + return 0; + } + + /* speed/duplex result is saved in PHY Specific Status Register */ + err = alx_read_phy_reg(hw, ALX_MII_GIGA_PSSR, &giga); + if (err) + return err; + + if (!(giga & ALX_GIGA_PSSR_SPD_DPLX_RESOLVED)) + goto wrong_speed; + + switch (giga & ALX_GIGA_PSSR_SPEED) { + case ALX_GIGA_PSSR_1000MBS: + *speed = SPEED_1000; + break; + case ALX_GIGA_PSSR_100MBS: + *speed = SPEED_100; + break; + case ALX_GIGA_PSSR_10MBS: + *speed = SPEED_10; + break; + default: + goto wrong_speed; + } + + *speed += (giga & ALX_GIGA_PSSR_DPLX) ? DUPLEX_FULL : DUPLEX_HALF; + return 1; + +wrong_speed: + dev_err(&pdev->dev, "invalid PHY speed/duplex: 0x%x\n", giga); + return -EINVAL; +} + +int alx_clear_phy_intr(struct alx_hw *hw) +{ + u16 isr; + + /* clear interrupt status by reading it */ + return alx_read_phy_reg(hw, ALX_MII_ISR, &isr); +} + +int alx_config_wol(struct alx_hw *hw) +{ + u32 wol = 0; + int err = 0; + + /* turn on magic packet event */ + if (hw->sleep_ctrl & ALX_SLEEP_WOL_MAGIC) + wol |= ALX_WOL0_MAGIC_EN | ALX_WOL0_PME_MAGIC_EN; + + /* turn on link up event */ + if (hw->sleep_ctrl & ALX_SLEEP_WOL_PHY) { + wol |= ALX_WOL0_LINK_EN | ALX_WOL0_PME_LINK; + /* only link up can wake up */ + err = alx_write_phy_reg(hw, ALX_MII_IER, ALX_IER_LINK_UP); + } + alx_write_mem32(hw, ALX_WOL0, wol); + + return err; +} + +void alx_disable_rss(struct alx_hw *hw) +{ + u32 ctrl = alx_read_mem32(hw, ALX_RXQ0); + + ctrl &= ~ALX_RXQ0_RSS_HASH_EN; + alx_write_mem32(hw, ALX_RXQ0, ctrl); +} + +void alx_configure_basic(struct alx_hw *hw) +{ + u32 val, raw_mtu, max_payload; + u16 val16; + u8 chip_rev = alx_hw_revision(hw); + + alx_set_macaddr(hw, hw->mac_addr); + + alx_write_mem32(hw, ALX_CLK_GATE, ALX_CLK_GATE_ALL); + + /* idle timeout to switch clk_125M */ + if (chip_rev >= ALX_REV_B0) + alx_write_mem32(hw, ALX_IDLE_DECISN_TIMER, + ALX_IDLE_DECISN_TIMER_DEF); + + alx_write_mem32(hw, ALX_SMB_TIMER, hw->smb_timer * 500UL); + + val = alx_read_mem32(hw, ALX_MASTER); + val |= ALX_MASTER_IRQMOD2_EN | + ALX_MASTER_IRQMOD1_EN | + ALX_MASTER_SYSALVTIMER_EN; + alx_write_mem32(hw, ALX_MASTER, val); + alx_write_mem32(hw, ALX_IRQ_MODU_TIMER, + (hw->imt >> 1) << ALX_IRQ_MODU_TIMER1_SHIFT); + /* intr re-trig timeout */ + alx_write_mem32(hw, ALX_INT_RETRIG, ALX_INT_RETRIG_TO); + /* tpd threshold to trig int */ + alx_write_mem32(hw, ALX_TINT_TPD_THRSHLD, hw->ith_tpd); + alx_write_mem32(hw, ALX_TINT_TIMER, hw->imt); + + raw_mtu = hw->mtu + ETH_HLEN; + alx_write_mem32(hw, ALX_MTU, raw_mtu + 8); + if (raw_mtu > ALX_MTU_JUMBO_TH) + hw->rx_ctrl &= ~ALX_MAC_CTRL_FAST_PAUSE; + + if ((raw_mtu + 8) < ALX_TXQ1_JUMBO_TSO_TH) + val = (raw_mtu + 8 + 7) >> 3; + else + val = ALX_TXQ1_JUMBO_TSO_TH >> 3; + alx_write_mem32(hw, ALX_TXQ1, val | ALX_TXQ1_ERRLGPKT_DROP_EN); + + max_payload = pcie_get_readrq(hw->pdev) >> 8; + /* + * if BIOS had changed the default dma read max length, + * restore it to default value + */ + if (max_payload < ALX_DEV_CTRL_MAXRRS_MIN) + pcie_set_readrq(hw->pdev, 128 << ALX_DEV_CTRL_MAXRRS_MIN); + + val = ALX_TXQ_TPD_BURSTPREF_DEF << ALX_TXQ0_TPD_BURSTPREF_SHIFT | + ALX_TXQ0_MODE_ENHANCE | ALX_TXQ0_LSO_8023_EN | + ALX_TXQ0_SUPT_IPOPT | + ALX_TXQ_TXF_BURST_PREF_DEF << ALX_TXQ0_TXF_BURST_PREF_SHIFT; + alx_write_mem32(hw, ALX_TXQ0, val); + val = ALX_TXQ_TPD_BURSTPREF_DEF << ALX_HQTPD_Q1_NUMPREF_SHIFT | + ALX_TXQ_TPD_BURSTPREF_DEF << ALX_HQTPD_Q2_NUMPREF_SHIFT | + ALX_TXQ_TPD_BURSTPREF_DEF << ALX_HQTPD_Q3_NUMPREF_SHIFT | + ALX_HQTPD_BURST_EN; + alx_write_mem32(hw, ALX_HQTPD, val); + + /* rxq, flow control */ + val = alx_read_mem32(hw, ALX_SRAM5); + val = ALX_GET_FIELD(val, ALX_SRAM_RXF_LEN) << 3; + if (val > ALX_SRAM_RXF_LEN_8K) { + val16 = ALX_MTU_STD_ALGN >> 3; + val = (val - ALX_RXQ2_RXF_FLOW_CTRL_RSVD) >> 3; + } else { + val16 = ALX_MTU_STD_ALGN >> 3; + val = (val - ALX_MTU_STD_ALGN) >> 3; + } + alx_write_mem32(hw, ALX_RXQ2, + val16 << ALX_RXQ2_RXF_XOFF_THRESH_SHIFT | + val << ALX_RXQ2_RXF_XON_THRESH_SHIFT); + val = ALX_RXQ0_NUM_RFD_PREF_DEF << ALX_RXQ0_NUM_RFD_PREF_SHIFT | + ALX_RXQ0_RSS_MODE_DIS << ALX_RXQ0_RSS_MODE_SHIFT | + ALX_RXQ0_IDT_TBL_SIZE_DEF << ALX_RXQ0_IDT_TBL_SIZE_SHIFT | + ALX_RXQ0_RSS_HSTYP_ALL | ALX_RXQ0_RSS_HASH_EN | + ALX_RXQ0_IPV6_PARSE_EN; + + if (alx_hw_giga(hw)) + ALX_SET_FIELD(val, ALX_RXQ0_ASPM_THRESH, + ALX_RXQ0_ASPM_THRESH_100M); + + alx_write_mem32(hw, ALX_RXQ0, val); + + val = alx_read_mem32(hw, ALX_DMA); + val = ALX_DMA_RORDER_MODE_OUT << ALX_DMA_RORDER_MODE_SHIFT | + ALX_DMA_RREQ_PRI_DATA | + max_payload << ALX_DMA_RREQ_BLEN_SHIFT | + ALX_DMA_WDLY_CNT_DEF << ALX_DMA_WDLY_CNT_SHIFT | + ALX_DMA_RDLY_CNT_DEF << ALX_DMA_RDLY_CNT_SHIFT | + (hw->dma_chnl - 1) << ALX_DMA_RCHNL_SEL_SHIFT; + alx_write_mem32(hw, ALX_DMA, val); + + /* default multi-tx-q weights */ + val = ALX_WRR_PRI_RESTRICT_NONE << ALX_WRR_PRI_SHIFT | + 4 << ALX_WRR_PRI0_SHIFT | + 4 << ALX_WRR_PRI1_SHIFT | + 4 << ALX_WRR_PRI2_SHIFT | + 4 << ALX_WRR_PRI3_SHIFT; + alx_write_mem32(hw, ALX_WRR, val); +} + +static inline u32 alx_speed_to_ethadv(int speed) +{ + switch (speed) { + case SPEED_1000 + DUPLEX_FULL: + return ADVERTISED_1000baseT_Full; + case SPEED_100 + DUPLEX_FULL: + return ADVERTISED_100baseT_Full; + case SPEED_100 + DUPLEX_HALF: + return ADVERTISED_10baseT_Half; + case SPEED_10 + DUPLEX_FULL: + return ADVERTISED_10baseT_Full; + case SPEED_10 + DUPLEX_HALF: + return ADVERTISED_10baseT_Half; + default: + return 0; + } +} + +int alx_select_powersaving_speed(struct alx_hw *hw, int *speed) +{ + int i, err, spd; + u16 lpa; + + err = alx_get_phy_link(hw, &spd); + if (err < 0) + return err; + + if (spd == SPEED_UNKNOWN) + return 0; + + err = alx_read_phy_reg(hw, MII_LPA, &lpa); + if (err) + return err; + + if (!(lpa & LPA_LPACK)) { + *speed = spd; + return 0; + } + + if (lpa & LPA_10FULL) + *speed = SPEED_10 + DUPLEX_FULL; + else if (lpa & LPA_10HALF) + *speed = SPEED_10 + DUPLEX_HALF; + else if (lpa & LPA_100FULL) + *speed = SPEED_100 + DUPLEX_FULL; + else + *speed = SPEED_100 + DUPLEX_HALF; + + if (*speed != spd) { + err = alx_write_phy_reg(hw, ALX_MII_IER, 0); + if (err) + return err; + err = alx_setup_speed_duplex(hw, + alx_speed_to_ethadv(*speed) | + ADVERTISED_Autoneg, + ALX_FC_ANEG | ALX_FC_RX | + ALX_FC_TX); + if (err) + return err; + + /* wait for linkup */ + for (i = 0; i < ALX_MAX_SETUP_LNK_CYCLE; i++) { + int speed2; + + msleep(100); + + err = alx_get_phy_link(hw, &speed2); + if (err < 0) + return err; + if (speed2 != SPEED_UNKNOWN) + break; + } + if (i == ALX_MAX_SETUP_LNK_CYCLE) + return -ETIMEDOUT; + } + + return 0; +} + +bool alx_get_phy_info(struct alx_hw *hw) +{ + u16 devs1, devs2; + + if (alx_read_phy_reg(hw, MII_PHYSID1, &hw->phy_id[0]) || + alx_read_phy_reg(hw, MII_PHYSID2, &hw->phy_id[1])) + return false; + + /* since we haven't PMA/PMD status2 register, we can't + * use mdio45_probe function for prtad and mmds. + * use fixed MMD3 to get mmds. + */ + if (alx_read_phy_ext(hw, 3, MDIO_DEVS1, &devs1) || + alx_read_phy_ext(hw, 3, MDIO_DEVS2, &devs2)) + return false; + hw->mdio.mmds = devs1 | devs2 << 16; + + return true; +} diff --git a/drivers/net/ethernet/atheros/alx/hw.h b/drivers/net/ethernet/atheros/alx/hw.h new file mode 100644 index 000000000000..65e723d2172a --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/hw.h @@ -0,0 +1,499 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef ALX_HW_H_ +#define ALX_HW_H_ +#include +#include +#include +#include "reg.h" + +/* Transmit Packet Descriptor, contains 4 32-bit words. + * + * 31 16 0 + * +----------------+----------------+ + * | vlan-tag | buf length | + * +----------------+----------------+ + * | Word 1 | + * +----------------+----------------+ + * | Word 2: buf addr lo | + * +----------------+----------------+ + * | Word 3: buf addr hi | + * +----------------+----------------+ + * + * Word 2 and 3 combine to form a 64-bit buffer address + * + * Word 1 has three forms, depending on the state of bit 8/12/13: + * if bit8 =='1', the definition is just for custom checksum offload. + * if bit8 == '0' && bit12 == '1' && bit13 == '1', the *FIRST* descriptor + * for the skb is special for LSO V2, Word 2 become total skb length , + * Word 3 is meaningless. + * other condition, the definition is for general skb or ip/tcp/udp + * checksum or LSO(TSO) offload. + * + * Here is the depiction: + * + * 0-+ 0-+ + * 1 | 1 | + * 2 | 2 | + * 3 | Payload offset 3 | L4 header offset + * 4 | (7:0) 4 | (7:0) + * 5 | 5 | + * 6 | 6 | + * 7-+ 7-+ + * 8 Custom csum enable = 1 8 Custom csum enable = 0 + * 9 General IPv4 checksum 9 General IPv4 checksum + * 10 General TCP checksum 10 General TCP checksum + * 11 General UDP checksum 11 General UDP checksum + * 12 Large Send Segment enable 12 Large Send Segment enable + * 13 Large Send Segment type 13 Large Send Segment type + * 14 VLAN tagged 14 VLAN tagged + * 15 Insert VLAN tag 15 Insert VLAN tag + * 16 IPv4 packet 16 IPv4 packet + * 17 Ethernet frame type 17 Ethernet frame type + * 18-+ 18-+ + * 19 | 19 | + * 20 | 20 | + * 21 | Custom csum offset 21 | + * 22 | (25:18) 22 | + * 23 | 23 | MSS (30:18) + * 24 | 24 | + * 25-+ 25 | + * 26-+ 26 | + * 27 | 27 | + * 28 | Reserved 28 | + * 29 | 29 | + * 30-+ 30-+ + * 31 End of packet 31 End of packet + */ +struct alx_txd { + __le16 len; + __le16 vlan_tag; + __le32 word1; + union { + __le64 addr; + struct { + __le32 pkt_len; + __le32 resvd; + } l; + } adrl; +} __packed; + +/* tpd word 1 */ +#define TPD_CXSUMSTART_MASK 0x00FF +#define TPD_CXSUMSTART_SHIFT 0 +#define TPD_L4HDROFFSET_MASK 0x00FF +#define TPD_L4HDROFFSET_SHIFT 0 +#define TPD_CXSUM_EN_MASK 0x0001 +#define TPD_CXSUM_EN_SHIFT 8 +#define TPD_IP_XSUM_MASK 0x0001 +#define TPD_IP_XSUM_SHIFT 9 +#define TPD_TCP_XSUM_MASK 0x0001 +#define TPD_TCP_XSUM_SHIFT 10 +#define TPD_UDP_XSUM_MASK 0x0001 +#define TPD_UDP_XSUM_SHIFT 11 +#define TPD_LSO_EN_MASK 0x0001 +#define TPD_LSO_EN_SHIFT 12 +#define TPD_LSO_V2_MASK 0x0001 +#define TPD_LSO_V2_SHIFT 13 +#define TPD_VLTAGGED_MASK 0x0001 +#define TPD_VLTAGGED_SHIFT 14 +#define TPD_INS_VLTAG_MASK 0x0001 +#define TPD_INS_VLTAG_SHIFT 15 +#define TPD_IPV4_MASK 0x0001 +#define TPD_IPV4_SHIFT 16 +#define TPD_ETHTYPE_MASK 0x0001 +#define TPD_ETHTYPE_SHIFT 17 +#define TPD_CXSUMOFFSET_MASK 0x00FF +#define TPD_CXSUMOFFSET_SHIFT 18 +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 18 +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 31 + +#define DESC_GET(_x, _name) ((_x) >> _name##SHIFT & _name##MASK) + +/* Receive Free Descriptor */ +struct alx_rfd { + __le64 addr; /* data buffer address, length is + * declared in register --- every + * buffer has the same size + */ +} __packed; + +/* Receive Return Descriptor, contains 4 32-bit words. + * + * 31 16 0 + * +----------------+----------------+ + * | Word 0 | + * +----------------+----------------+ + * | Word 1: RSS Hash value | + * +----------------+----------------+ + * | Word 2 | + * +----------------+----------------+ + * | Word 3 | + * +----------------+----------------+ + * + * Word 0 depiction & Word 2 depiction: + * + * 0--+ 0--+ + * 1 | 1 | + * 2 | 2 | + * 3 | 3 | + * 4 | 4 | + * 5 | 5 | + * 6 | 6 | + * 7 | IP payload checksum 7 | VLAN tag + * 8 | (15:0) 8 | (15:0) + * 9 | 9 | + * 10 | 10 | + * 11 | 11 | + * 12 | 12 | + * 13 | 13 | + * 14 | 14 | + * 15-+ 15-+ + * 16-+ 16-+ + * 17 | Number of RFDs 17 | + * 18 | (19:16) 18 | + * 19-+ 19 | Protocol ID + * 20-+ 20 | (23:16) + * 21 | 21 | + * 22 | 22 | + * 23 | 23-+ + * 24 | 24 | Reserved + * 25 | Start index of RFD-ring 25-+ + * 26 | (31:20) 26 | RSS Q-num (27:25) + * 27 | 27-+ + * 28 | 28-+ + * 29 | 29 | RSS Hash algorithm + * 30 | 30 | (31:28) + * 31-+ 31-+ + * + * Word 3 depiction: + * + * 0--+ + * 1 | + * 2 | + * 3 | + * 4 | + * 5 | + * 6 | + * 7 | Packet length (include FCS) + * 8 | (13:0) + * 9 | + * 10 | + * 11 | + * 12 | + * 13-+ + * 14 L4 Header checksum error + * 15 IPv4 checksum error + * 16 VLAN tagged + * 17-+ + * 18 | Protocol ID (19:17) + * 19-+ + * 20 Receive error summary + * 21 FCS(CRC) error + * 22 Frame alignment error + * 23 Truncated packet + * 24 Runt packet + * 25 Incomplete packet due to insufficient rx-desc + * 26 Broadcast packet + * 27 Multicast packet + * 28 Ethernet type (EII or 802.3) + * 29 FIFO overflow + * 30 Length error (for 802.3, length field mismatch with actual len) + * 31 Updated, indicate to driver that this RRD is refreshed. + */ +struct alx_rrd { + __le32 word0; + __le32 rss_hash; + __le32 word2; + __le32 word3; +} __packed; + +/* rrd word 0 */ +#define RRD_XSUM_MASK 0xFFFF +#define RRD_XSUM_SHIFT 0 +#define RRD_NOR_MASK 0x000F +#define RRD_NOR_SHIFT 16 +#define RRD_SI_MASK 0x0FFF +#define RRD_SI_SHIFT 20 + +/* rrd word 2 */ +#define RRD_VLTAG_MASK 0xFFFF +#define RRD_VLTAG_SHIFT 0 +#define RRD_PID_MASK 0x00FF +#define RRD_PID_SHIFT 16 +/* non-ip packet */ +#define RRD_PID_NONIP 0 +/* ipv4(only) */ +#define RRD_PID_IPV4 1 +/* tcp/ipv6 */ +#define RRD_PID_IPV6TCP 2 +/* tcp/ipv4 */ +#define RRD_PID_IPV4TCP 3 +/* udp/ipv6 */ +#define RRD_PID_IPV6UDP 4 +/* udp/ipv4 */ +#define RRD_PID_IPV4UDP 5 +/* ipv6(only) */ +#define RRD_PID_IPV6 6 +/* LLDP packet */ +#define RRD_PID_LLDP 7 +/* 1588 packet */ +#define RRD_PID_1588 8 +#define RRD_RSSQ_MASK 0x0007 +#define RRD_RSSQ_SHIFT 25 +#define RRD_RSSALG_MASK 0x000F +#define RRD_RSSALG_SHIFT 28 +#define RRD_RSSALG_TCPV6 0x1 +#define RRD_RSSALG_IPV6 0x2 +#define RRD_RSSALG_TCPV4 0x4 +#define RRD_RSSALG_IPV4 0x8 + +/* rrd word 3 */ +#define RRD_PKTLEN_MASK 0x3FFF +#define RRD_PKTLEN_SHIFT 0 +#define RRD_ERR_L4_MASK 0x0001 +#define RRD_ERR_L4_SHIFT 14 +#define RRD_ERR_IPV4_MASK 0x0001 +#define RRD_ERR_IPV4_SHIFT 15 +#define RRD_VLTAGGED_MASK 0x0001 +#define RRD_VLTAGGED_SHIFT 16 +#define RRD_OLD_PID_MASK 0x0007 +#define RRD_OLD_PID_SHIFT 17 +#define RRD_ERR_RES_MASK 0x0001 +#define RRD_ERR_RES_SHIFT 20 +#define RRD_ERR_FCS_MASK 0x0001 +#define RRD_ERR_FCS_SHIFT 21 +#define RRD_ERR_FAE_MASK 0x0001 +#define RRD_ERR_FAE_SHIFT 22 +#define RRD_ERR_TRUNC_MASK 0x0001 +#define RRD_ERR_TRUNC_SHIFT 23 +#define RRD_ERR_RUNT_MASK 0x0001 +#define RRD_ERR_RUNT_SHIFT 24 +#define RRD_ERR_ICMP_MASK 0x0001 +#define RRD_ERR_ICMP_SHIFT 25 +#define RRD_BCAST_MASK 0x0001 +#define RRD_BCAST_SHIFT 26 +#define RRD_MCAST_MASK 0x0001 +#define RRD_MCAST_SHIFT 27 +#define RRD_ETHTYPE_MASK 0x0001 +#define RRD_ETHTYPE_SHIFT 28 +#define RRD_ERR_FIFOV_MASK 0x0001 +#define RRD_ERR_FIFOV_SHIFT 29 +#define RRD_ERR_LEN_MASK 0x0001 +#define RRD_ERR_LEN_SHIFT 30 +#define RRD_UPDATED_MASK 0x0001 +#define RRD_UPDATED_SHIFT 31 + + +#define ALX_MAX_SETUP_LNK_CYCLE 50 + +/* for FlowControl */ +#define ALX_FC_RX 0x01 +#define ALX_FC_TX 0x02 +#define ALX_FC_ANEG 0x04 + +/* for sleep control */ +#define ALX_SLEEP_WOL_PHY 0x00000001 +#define ALX_SLEEP_WOL_MAGIC 0x00000002 +#define ALX_SLEEP_CIFS 0x00000004 +#define ALX_SLEEP_ACTIVE (ALX_SLEEP_WOL_PHY | \ + ALX_SLEEP_WOL_MAGIC | \ + ALX_SLEEP_CIFS) + +/* for RSS hash type */ +#define ALX_RSS_HASH_TYPE_IPV4 0x1 +#define ALX_RSS_HASH_TYPE_IPV4_TCP 0x2 +#define ALX_RSS_HASH_TYPE_IPV6 0x4 +#define ALX_RSS_HASH_TYPE_IPV6_TCP 0x8 +#define ALX_RSS_HASH_TYPE_ALL (ALX_RSS_HASH_TYPE_IPV4 | \ + ALX_RSS_HASH_TYPE_IPV4_TCP | \ + ALX_RSS_HASH_TYPE_IPV6 | \ + ALX_RSS_HASH_TYPE_IPV6_TCP) +#define ALX_DEF_RXBUF_SIZE 1536 +#define ALX_MAX_JUMBO_PKT_SIZE (9*1024) +#define ALX_MAX_TSO_PKT_SIZE (7*1024) +#define ALX_MAX_FRAME_SIZE ALX_MAX_JUMBO_PKT_SIZE +#define ALX_MIN_FRAME_SIZE 68 +#define ALX_RAW_MTU(_mtu) (_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN) + +#define ALX_MAX_RX_QUEUES 8 +#define ALX_MAX_TX_QUEUES 4 +#define ALX_MAX_HANDLED_INTRS 5 + +#define ALX_ISR_MISC (ALX_ISR_PCIE_LNKDOWN | \ + ALX_ISR_DMAW | \ + ALX_ISR_DMAR | \ + ALX_ISR_SMB | \ + ALX_ISR_MANU | \ + ALX_ISR_TIMER) + +#define ALX_ISR_FATAL (ALX_ISR_PCIE_LNKDOWN | \ + ALX_ISR_DMAW | ALX_ISR_DMAR) + +#define ALX_ISR_ALERT (ALX_ISR_RXF_OV | \ + ALX_ISR_TXF_UR | \ + ALX_ISR_RFD_UR) + +#define ALX_ISR_ALL_QUEUES (ALX_ISR_TX_Q0 | \ + ALX_ISR_TX_Q1 | \ + ALX_ISR_TX_Q2 | \ + ALX_ISR_TX_Q3 | \ + ALX_ISR_RX_Q0 | \ + ALX_ISR_RX_Q1 | \ + ALX_ISR_RX_Q2 | \ + ALX_ISR_RX_Q3 | \ + ALX_ISR_RX_Q4 | \ + ALX_ISR_RX_Q5 | \ + ALX_ISR_RX_Q6 | \ + ALX_ISR_RX_Q7) + +/* maximum interrupt vectors for msix */ +#define ALX_MAX_MSIX_INTRS 16 + +#define ALX_GET_FIELD(_data, _field) \ + (((_data) >> _field ## _SHIFT) & _field ## _MASK) + +#define ALX_SET_FIELD(_data, _field, _value) do { \ + (_data) &= ~(_field ## _MASK << _field ## _SHIFT); \ + (_data) |= ((_value) & _field ## _MASK) << _field ## _SHIFT;\ + } while (0) + +struct alx_hw { + struct pci_dev *pdev; + u8 __iomem *hw_addr; + + /* current & permanent mac addr */ + u8 mac_addr[ETH_ALEN]; + u8 perm_addr[ETH_ALEN]; + + u16 mtu; + u16 imt; + u8 dma_chnl; + u8 max_dma_chnl; + /* tpd threshold to trig INT */ + u32 ith_tpd; + u32 rx_ctrl; + u32 mc_hash[2]; + + u32 smb_timer; + /* SPEED_* + DUPLEX_*, SPEED_UNKNOWN if link is down */ + int link_speed; + + /* auto-neg advertisement or force mode config */ + u32 adv_cfg; + u8 flowctrl; + + u32 sleep_ctrl; + + spinlock_t mdio_lock; + struct mdio_if_info mdio; + u16 phy_id[2]; + + /* PHY link patch flag */ + bool lnk_patch; +}; + +static inline int alx_hw_revision(struct alx_hw *hw) +{ + return hw->pdev->revision >> ALX_PCI_REVID_SHIFT; +} + +static inline bool alx_hw_with_cr(struct alx_hw *hw) +{ + return hw->pdev->revision & 1; +} + +static inline bool alx_hw_giga(struct alx_hw *hw) +{ + return hw->pdev->device & 1; +} + +static inline void alx_write_mem8(struct alx_hw *hw, u32 reg, u8 val) +{ + writeb(val, hw->hw_addr + reg); +} + +static inline void alx_write_mem16(struct alx_hw *hw, u32 reg, u16 val) +{ + writew(val, hw->hw_addr + reg); +} + +static inline u16 alx_read_mem16(struct alx_hw *hw, u32 reg) +{ + return readw(hw->hw_addr + reg); +} + +static inline void alx_write_mem32(struct alx_hw *hw, u32 reg, u32 val) +{ + writel(val, hw->hw_addr + reg); +} + +static inline u32 alx_read_mem32(struct alx_hw *hw, u32 reg) +{ + return readl(hw->hw_addr + reg); +} + +static inline void alx_post_write(struct alx_hw *hw) +{ + readl(hw->hw_addr); +} + +int alx_get_perm_macaddr(struct alx_hw *hw, u8 *addr); +void alx_reset_phy(struct alx_hw *hw); +void alx_reset_pcie(struct alx_hw *hw); +void alx_enable_aspm(struct alx_hw *hw, bool l0s_en, bool l1_en); +int alx_setup_speed_duplex(struct alx_hw *hw, u32 ethadv, u8 flowctrl); +void alx_post_phy_link(struct alx_hw *hw); +int alx_pre_suspend(struct alx_hw *hw, int speed); +int alx_read_phy_reg(struct alx_hw *hw, u16 reg, u16 *phy_data); +int alx_write_phy_reg(struct alx_hw *hw, u16 reg, u16 phy_data); +int alx_read_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 *pdata); +int alx_write_phy_ext(struct alx_hw *hw, u8 dev, u16 reg, u16 data); +int alx_get_phy_link(struct alx_hw *hw, int *speed); +int alx_clear_phy_intr(struct alx_hw *hw); +int alx_config_wol(struct alx_hw *hw); +void alx_cfg_mac_flowcontrol(struct alx_hw *hw, u8 fc); +void alx_start_mac(struct alx_hw *hw); +int alx_reset_mac(struct alx_hw *hw); +void alx_set_macaddr(struct alx_hw *hw, const u8 *addr); +bool alx_phy_configured(struct alx_hw *hw); +void alx_configure_basic(struct alx_hw *hw); +void alx_disable_rss(struct alx_hw *hw); +int alx_select_powersaving_speed(struct alx_hw *hw, int *speed); +bool alx_get_phy_info(struct alx_hw *hw); + +#endif diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c new file mode 100644 index 000000000000..418de8b13165 --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -0,0 +1,1625 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "alx.h" +#include "hw.h" +#include "reg.h" + +const char alx_drv_name[] = "alx"; + + +static void alx_free_txbuf(struct alx_priv *alx, int entry) +{ + struct alx_buffer *txb = &alx->txq.bufs[entry]; + + if (dma_unmap_len(txb, size)) { + dma_unmap_single(&alx->hw.pdev->dev, + dma_unmap_addr(txb, dma), + dma_unmap_len(txb, size), + DMA_TO_DEVICE); + dma_unmap_len_set(txb, size, 0); + } + + if (txb->skb) { + dev_kfree_skb_any(txb->skb); + txb->skb = NULL; + } +} + +static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp) +{ + struct alx_rx_queue *rxq = &alx->rxq; + struct sk_buff *skb; + struct alx_buffer *cur_buf; + dma_addr_t dma; + u16 cur, next, count = 0; + + next = cur = rxq->write_idx; + if (++next == alx->rx_ringsz) + next = 0; + cur_buf = &rxq->bufs[cur]; + + while (!cur_buf->skb && next != rxq->read_idx) { + struct alx_rfd *rfd = &rxq->rfd[cur]; + + skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp); + if (!skb) + break; + dma = dma_map_single(&alx->hw.pdev->dev, + skb->data, alx->rxbuf_size, + DMA_FROM_DEVICE); + if (dma_mapping_error(&alx->hw.pdev->dev, dma)) { + dev_kfree_skb(skb); + break; + } + + /* Unfortunately, RX descriptor buffers must be 4-byte + * aligned, so we can't use IP alignment. + */ + if (WARN_ON(dma & 3)) { + dev_kfree_skb(skb); + break; + } + + cur_buf->skb = skb; + dma_unmap_len_set(cur_buf, size, alx->rxbuf_size); + dma_unmap_addr_set(cur_buf, dma, dma); + rfd->addr = cpu_to_le64(dma); + + cur = next; + if (++next == alx->rx_ringsz) + next = 0; + cur_buf = &rxq->bufs[cur]; + count++; + } + + if (count) { + /* flush all updates before updating hardware */ + wmb(); + rxq->write_idx = cur; + alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur); + } + + return count; +} + +static inline int alx_tpd_avail(struct alx_priv *alx) +{ + struct alx_tx_queue *txq = &alx->txq; + + if (txq->write_idx >= txq->read_idx) + return alx->tx_ringsz + txq->read_idx - txq->write_idx - 1; + return txq->read_idx - txq->write_idx - 1; +} + +static bool alx_clean_tx_irq(struct alx_priv *alx) +{ + struct alx_tx_queue *txq = &alx->txq; + u16 hw_read_idx, sw_read_idx; + unsigned int total_bytes = 0, total_packets = 0; + int budget = ALX_DEFAULT_TX_WORK; + + sw_read_idx = txq->read_idx; + hw_read_idx = alx_read_mem16(&alx->hw, ALX_TPD_PRI0_CIDX); + + if (sw_read_idx != hw_read_idx) { + while (sw_read_idx != hw_read_idx && budget > 0) { + struct sk_buff *skb; + + skb = txq->bufs[sw_read_idx].skb; + if (skb) { + total_bytes += skb->len; + total_packets++; + budget--; + } + + alx_free_txbuf(alx, sw_read_idx); + + if (++sw_read_idx == alx->tx_ringsz) + sw_read_idx = 0; + } + txq->read_idx = sw_read_idx; + + netdev_completed_queue(alx->dev, total_packets, total_bytes); + } + + if (netif_queue_stopped(alx->dev) && netif_carrier_ok(alx->dev) && + alx_tpd_avail(alx) > alx->tx_ringsz/4) + netif_wake_queue(alx->dev); + + return sw_read_idx == hw_read_idx; +} + +static void alx_schedule_link_check(struct alx_priv *alx) +{ + schedule_work(&alx->link_check_wk); +} + +static void alx_schedule_reset(struct alx_priv *alx) +{ + schedule_work(&alx->reset_wk); +} + +static bool alx_clean_rx_irq(struct alx_priv *alx, int budget) +{ + struct alx_rx_queue *rxq = &alx->rxq; + struct alx_rrd *rrd; + struct alx_buffer *rxb; + struct sk_buff *skb; + u16 length, rfd_cleaned = 0; + + while (budget > 0) { + rrd = &rxq->rrd[rxq->rrd_read_idx]; + if (!(rrd->word3 & cpu_to_le32(1 << RRD_UPDATED_SHIFT))) + break; + rrd->word3 &= ~cpu_to_le32(1 << RRD_UPDATED_SHIFT); + + if (ALX_GET_FIELD(le32_to_cpu(rrd->word0), + RRD_SI) != rxq->read_idx || + ALX_GET_FIELD(le32_to_cpu(rrd->word0), + RRD_NOR) != 1) { + alx_schedule_reset(alx); + return 0; + } + + rxb = &rxq->bufs[rxq->read_idx]; + dma_unmap_single(&alx->hw.pdev->dev, + dma_unmap_addr(rxb, dma), + dma_unmap_len(rxb, size), + DMA_FROM_DEVICE); + dma_unmap_len_set(rxb, size, 0); + skb = rxb->skb; + rxb->skb = NULL; + + if (rrd->word3 & cpu_to_le32(1 << RRD_ERR_RES_SHIFT) || + rrd->word3 & cpu_to_le32(1 << RRD_ERR_LEN_SHIFT)) { + rrd->word3 = 0; + dev_kfree_skb_any(skb); + goto next_pkt; + } + + length = ALX_GET_FIELD(le32_to_cpu(rrd->word3), + RRD_PKTLEN) - ETH_FCS_LEN; + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, alx->dev); + + skb_checksum_none_assert(skb); + if (alx->dev->features & NETIF_F_RXCSUM && + !(rrd->word3 & (cpu_to_le32(1 << RRD_ERR_L4_SHIFT) | + cpu_to_le32(1 << RRD_ERR_IPV4_SHIFT)))) { + switch (ALX_GET_FIELD(le32_to_cpu(rrd->word2), + RRD_PID)) { + case RRD_PID_IPV6UDP: + case RRD_PID_IPV4UDP: + case RRD_PID_IPV4TCP: + case RRD_PID_IPV6TCP: + skb->ip_summed = CHECKSUM_UNNECESSARY; + break; + } + } + + napi_gro_receive(&alx->napi, skb); + budget--; + +next_pkt: + if (++rxq->read_idx == alx->rx_ringsz) + rxq->read_idx = 0; + if (++rxq->rrd_read_idx == alx->rx_ringsz) + rxq->rrd_read_idx = 0; + + if (++rfd_cleaned > ALX_RX_ALLOC_THRESH) + rfd_cleaned -= alx_refill_rx_ring(alx, GFP_ATOMIC); + } + + if (rfd_cleaned) + alx_refill_rx_ring(alx, GFP_ATOMIC); + + return budget > 0; +} + +static int alx_poll(struct napi_struct *napi, int budget) +{ + struct alx_priv *alx = container_of(napi, struct alx_priv, napi); + struct alx_hw *hw = &alx->hw; + bool complete = true; + unsigned long flags; + + complete = alx_clean_tx_irq(alx) && + alx_clean_rx_irq(alx, budget); + + if (!complete) + return 1; + + napi_complete(&alx->napi); + + /* enable interrupt */ + spin_lock_irqsave(&alx->irq_lock, flags); + alx->int_mask |= ALX_ISR_TX_Q0 | ALX_ISR_RX_Q0; + alx_write_mem32(hw, ALX_IMR, alx->int_mask); + spin_unlock_irqrestore(&alx->irq_lock, flags); + + alx_post_write(hw); + + return 0; +} + +static irqreturn_t alx_intr_handle(struct alx_priv *alx, u32 intr) +{ + struct alx_hw *hw = &alx->hw; + bool write_int_mask = false; + + spin_lock(&alx->irq_lock); + + /* ACK interrupt */ + alx_write_mem32(hw, ALX_ISR, intr | ALX_ISR_DIS); + intr &= alx->int_mask; + + if (intr & ALX_ISR_FATAL) { + netif_warn(alx, hw, alx->dev, + "fatal interrupt 0x%x, resetting\n", intr); + alx_schedule_reset(alx); + goto out; + } + + if (intr & ALX_ISR_ALERT) + netdev_warn(alx->dev, "alert interrupt: 0x%x\n", intr); + + if (intr & ALX_ISR_PHY) { + /* suppress PHY interrupt, because the source + * is from PHY internal. only the internal status + * is cleared, the interrupt status could be cleared. + */ + alx->int_mask &= ~ALX_ISR_PHY; + write_int_mask = true; + alx_schedule_link_check(alx); + } + + if (intr & (ALX_ISR_TX_Q0 | ALX_ISR_RX_Q0)) { + napi_schedule(&alx->napi); + /* mask rx/tx interrupt, enable them when napi complete */ + alx->int_mask &= ~ALX_ISR_ALL_QUEUES; + write_int_mask = true; + } + + if (write_int_mask) + alx_write_mem32(hw, ALX_IMR, alx->int_mask); + + alx_write_mem32(hw, ALX_ISR, 0); + + out: + spin_unlock(&alx->irq_lock); + return IRQ_HANDLED; +} + +static irqreturn_t alx_intr_msi(int irq, void *data) +{ + struct alx_priv *alx = data; + + return alx_intr_handle(alx, alx_read_mem32(&alx->hw, ALX_ISR)); +} + +static irqreturn_t alx_intr_legacy(int irq, void *data) +{ + struct alx_priv *alx = data; + struct alx_hw *hw = &alx->hw; + u32 intr; + + intr = alx_read_mem32(hw, ALX_ISR); + + if (intr & ALX_ISR_DIS || !(intr & alx->int_mask)) + return IRQ_NONE; + + return alx_intr_handle(alx, intr); +} + +static void alx_init_ring_ptrs(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + u32 addr_hi = ((u64)alx->descmem.dma) >> 32; + + alx->rxq.read_idx = 0; + alx->rxq.write_idx = 0; + alx->rxq.rrd_read_idx = 0; + alx_write_mem32(hw, ALX_RX_BASE_ADDR_HI, addr_hi); + alx_write_mem32(hw, ALX_RRD_ADDR_LO, alx->rxq.rrd_dma); + alx_write_mem32(hw, ALX_RRD_RING_SZ, alx->rx_ringsz); + alx_write_mem32(hw, ALX_RFD_ADDR_LO, alx->rxq.rfd_dma); + alx_write_mem32(hw, ALX_RFD_RING_SZ, alx->rx_ringsz); + alx_write_mem32(hw, ALX_RFD_BUF_SZ, alx->rxbuf_size); + + alx->txq.read_idx = 0; + alx->txq.write_idx = 0; + alx_write_mem32(hw, ALX_TX_BASE_ADDR_HI, addr_hi); + alx_write_mem32(hw, ALX_TPD_PRI0_ADDR_LO, alx->txq.tpd_dma); + alx_write_mem32(hw, ALX_TPD_RING_SZ, alx->tx_ringsz); + + /* load these pointers into the chip */ + alx_write_mem32(hw, ALX_SRAM9, ALX_SRAM_LOAD_PTR); +} + +static void alx_free_txring_buf(struct alx_priv *alx) +{ + struct alx_tx_queue *txq = &alx->txq; + int i; + + if (!txq->bufs) + return; + + for (i = 0; i < alx->tx_ringsz; i++) + alx_free_txbuf(alx, i); + + memset(txq->bufs, 0, alx->tx_ringsz * sizeof(struct alx_buffer)); + memset(txq->tpd, 0, alx->tx_ringsz * sizeof(struct alx_txd)); + txq->write_idx = 0; + txq->read_idx = 0; + + netdev_reset_queue(alx->dev); +} + +static void alx_free_rxring_buf(struct alx_priv *alx) +{ + struct alx_rx_queue *rxq = &alx->rxq; + struct alx_buffer *cur_buf; + u16 i; + + if (rxq == NULL) + return; + + for (i = 0; i < alx->rx_ringsz; i++) { + cur_buf = rxq->bufs + i; + if (cur_buf->skb) { + dma_unmap_single(&alx->hw.pdev->dev, + dma_unmap_addr(cur_buf, dma), + dma_unmap_len(cur_buf, size), + DMA_FROM_DEVICE); + dev_kfree_skb(cur_buf->skb); + cur_buf->skb = NULL; + dma_unmap_len_set(cur_buf, size, 0); + dma_unmap_addr_set(cur_buf, dma, 0); + } + } + + rxq->write_idx = 0; + rxq->read_idx = 0; + rxq->rrd_read_idx = 0; +} + +static void alx_free_buffers(struct alx_priv *alx) +{ + alx_free_txring_buf(alx); + alx_free_rxring_buf(alx); +} + +static int alx_reinit_rings(struct alx_priv *alx) +{ + alx_free_buffers(alx); + + alx_init_ring_ptrs(alx); + + if (!alx_refill_rx_ring(alx, GFP_KERNEL)) + return -ENOMEM; + + return 0; +} + +static void alx_add_mc_addr(struct alx_hw *hw, const u8 *addr, u32 *mc_hash) +{ + u32 crc32, bit, reg; + + crc32 = ether_crc(ETH_ALEN, addr); + reg = (crc32 >> 31) & 0x1; + bit = (crc32 >> 26) & 0x1F; + + mc_hash[reg] |= BIT(bit); +} + +static void __alx_set_rx_mode(struct net_device *netdev) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + struct netdev_hw_addr *ha; + u32 mc_hash[2] = {}; + + if (!(netdev->flags & IFF_ALLMULTI)) { + netdev_for_each_mc_addr(ha, netdev) + alx_add_mc_addr(hw, ha->addr, mc_hash); + + alx_write_mem32(hw, ALX_HASH_TBL0, mc_hash[0]); + alx_write_mem32(hw, ALX_HASH_TBL1, mc_hash[1]); + } + + hw->rx_ctrl &= ~(ALX_MAC_CTRL_MULTIALL_EN | ALX_MAC_CTRL_PROMISC_EN); + if (netdev->flags & IFF_PROMISC) + hw->rx_ctrl |= ALX_MAC_CTRL_PROMISC_EN; + if (netdev->flags & IFF_ALLMULTI) + hw->rx_ctrl |= ALX_MAC_CTRL_MULTIALL_EN; + + alx_write_mem32(hw, ALX_MAC_CTRL, hw->rx_ctrl); +} + +static void alx_set_rx_mode(struct net_device *netdev) +{ + __alx_set_rx_mode(netdev); +} + +static int alx_set_mac_address(struct net_device *netdev, void *data) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + struct sockaddr *addr = data; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (netdev->addr_assign_type & NET_ADDR_RANDOM) + netdev->addr_assign_type ^= NET_ADDR_RANDOM; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len); + alx_set_macaddr(hw, hw->mac_addr); + + return 0; +} + +static int alx_alloc_descriptors(struct alx_priv *alx) +{ + alx->txq.bufs = kcalloc(alx->tx_ringsz, + sizeof(struct alx_buffer), + GFP_KERNEL); + if (!alx->txq.bufs) + return -ENOMEM; + + alx->rxq.bufs = kcalloc(alx->rx_ringsz, + sizeof(struct alx_buffer), + GFP_KERNEL); + if (!alx->rxq.bufs) + goto out_free; + + /* physical tx/rx ring descriptors + * + * Allocate them as a single chunk because they must not cross a + * 4G boundary (hardware has a single register for high 32 bits + * of addresses only) + */ + alx->descmem.size = sizeof(struct alx_txd) * alx->tx_ringsz + + sizeof(struct alx_rrd) * alx->rx_ringsz + + sizeof(struct alx_rfd) * alx->rx_ringsz; + alx->descmem.virt = dma_zalloc_coherent(&alx->hw.pdev->dev, + alx->descmem.size, + &alx->descmem.dma, + GFP_KERNEL); + if (!alx->descmem.virt) + goto out_free; + + alx->txq.tpd = (void *)alx->descmem.virt; + alx->txq.tpd_dma = alx->descmem.dma; + + /* alignment requirement for next block */ + BUILD_BUG_ON(sizeof(struct alx_txd) % 8); + + alx->rxq.rrd = + (void *)((u8 *)alx->descmem.virt + + sizeof(struct alx_txd) * alx->tx_ringsz); + alx->rxq.rrd_dma = alx->descmem.dma + + sizeof(struct alx_txd) * alx->tx_ringsz; + + /* alignment requirement for next block */ + BUILD_BUG_ON(sizeof(struct alx_rrd) % 8); + + alx->rxq.rfd = + (void *)((u8 *)alx->descmem.virt + + sizeof(struct alx_txd) * alx->tx_ringsz + + sizeof(struct alx_rrd) * alx->rx_ringsz); + alx->rxq.rfd_dma = alx->descmem.dma + + sizeof(struct alx_txd) * alx->tx_ringsz + + sizeof(struct alx_rrd) * alx->rx_ringsz; + + return 0; +out_free: + kfree(alx->txq.bufs); + kfree(alx->rxq.bufs); + return -ENOMEM; +} + +static int alx_alloc_rings(struct alx_priv *alx) +{ + int err; + + err = alx_alloc_descriptors(alx); + if (err) + return err; + + alx->int_mask &= ~ALX_ISR_ALL_QUEUES; + alx->int_mask |= ALX_ISR_TX_Q0 | ALX_ISR_RX_Q0; + alx->tx_ringsz = alx->tx_ringsz; + + netif_napi_add(alx->dev, &alx->napi, alx_poll, 64); + + alx_reinit_rings(alx); + return 0; +} + +static void alx_free_rings(struct alx_priv *alx) +{ + netif_napi_del(&alx->napi); + alx_free_buffers(alx); + + kfree(alx->txq.bufs); + kfree(alx->rxq.bufs); + + dma_free_coherent(&alx->hw.pdev->dev, + alx->descmem.size, + alx->descmem.virt, + alx->descmem.dma); +} + +static void alx_config_vector_mapping(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + + alx_write_mem32(hw, ALX_MSI_MAP_TBL1, 0); + alx_write_mem32(hw, ALX_MSI_MAP_TBL2, 0); + alx_write_mem32(hw, ALX_MSI_ID_MAP, 0); +} + +static void alx_irq_enable(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + + /* level-1 interrupt switch */ + alx_write_mem32(hw, ALX_ISR, 0); + alx_write_mem32(hw, ALX_IMR, alx->int_mask); + alx_post_write(hw); +} + +static void alx_irq_disable(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + + alx_write_mem32(hw, ALX_ISR, ALX_ISR_DIS); + alx_write_mem32(hw, ALX_IMR, 0); + alx_post_write(hw); + + synchronize_irq(alx->hw.pdev->irq); +} + +static int alx_request_irq(struct alx_priv *alx) +{ + struct pci_dev *pdev = alx->hw.pdev; + struct alx_hw *hw = &alx->hw; + int err; + u32 msi_ctrl; + + msi_ctrl = (hw->imt >> 1) << ALX_MSI_RETRANS_TM_SHIFT; + + if (!pci_enable_msi(alx->hw.pdev)) { + alx->msi = true; + + alx_write_mem32(hw, ALX_MSI_RETRANS_TIMER, + msi_ctrl | ALX_MSI_MASK_SEL_LINE); + err = request_irq(pdev->irq, alx_intr_msi, 0, + alx->dev->name, alx); + if (!err) + goto out; + /* fall back to legacy interrupt */ + pci_disable_msi(alx->hw.pdev); + } + + alx_write_mem32(hw, ALX_MSI_RETRANS_TIMER, 0); + err = request_irq(pdev->irq, alx_intr_legacy, IRQF_SHARED, + alx->dev->name, alx); +out: + if (!err) + alx_config_vector_mapping(alx); + return err; +} + +static void alx_free_irq(struct alx_priv *alx) +{ + struct pci_dev *pdev = alx->hw.pdev; + + free_irq(pdev->irq, alx); + + if (alx->msi) { + pci_disable_msi(alx->hw.pdev); + alx->msi = false; + } +} + +static int alx_identify_hw(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + int rev = alx_hw_revision(hw); + + if (rev > ALX_REV_C0) + return -EINVAL; + + hw->max_dma_chnl = rev >= ALX_REV_B0 ? 4 : 2; + + return 0; +} + +static int alx_init_sw(struct alx_priv *alx) +{ + struct pci_dev *pdev = alx->hw.pdev; + struct alx_hw *hw = &alx->hw; + int err; + + err = alx_identify_hw(alx); + if (err) { + dev_err(&pdev->dev, "unrecognized chip, aborting\n"); + return err; + } + + alx->hw.lnk_patch = + pdev->device == ALX_DEV_ID_AR8161 && + pdev->subsystem_vendor == PCI_VENDOR_ID_ATTANSIC && + pdev->subsystem_device == 0x0091 && + pdev->revision == 0; + + hw->smb_timer = 400; + hw->mtu = alx->dev->mtu; + alx->rxbuf_size = ALIGN(ALX_RAW_MTU(hw->mtu), 8); + alx->tx_ringsz = 256; + alx->rx_ringsz = 512; + hw->sleep_ctrl = ALX_SLEEP_WOL_MAGIC | ALX_SLEEP_WOL_PHY; + hw->imt = 200; + alx->int_mask = ALX_ISR_MISC; + hw->dma_chnl = hw->max_dma_chnl; + hw->ith_tpd = alx->tx_ringsz / 3; + hw->link_speed = SPEED_UNKNOWN; + hw->adv_cfg = ADVERTISED_Autoneg | + ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_1000baseT_Full; + hw->flowctrl = ALX_FC_ANEG | ALX_FC_RX | ALX_FC_TX; + + hw->rx_ctrl = ALX_MAC_CTRL_WOLSPED_SWEN | + ALX_MAC_CTRL_MHASH_ALG_HI5B | + ALX_MAC_CTRL_BRD_EN | + ALX_MAC_CTRL_PCRCE | + ALX_MAC_CTRL_CRCE | + ALX_MAC_CTRL_RXFC_EN | + ALX_MAC_CTRL_TXFC_EN | + 7 << ALX_MAC_CTRL_PRMBLEN_SHIFT; + + return err; +} + + +static netdev_features_t alx_fix_features(struct net_device *netdev, + netdev_features_t features) +{ + if (netdev->mtu > ALX_MAX_TSO_PKT_SIZE) + features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + + return features; +} + +static void alx_netif_stop(struct alx_priv *alx) +{ + alx->dev->trans_start = jiffies; + if (netif_carrier_ok(alx->dev)) { + netif_carrier_off(alx->dev); + netif_tx_disable(alx->dev); + napi_disable(&alx->napi); + } +} + +static void alx_halt(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + + alx_netif_stop(alx); + hw->link_speed = SPEED_UNKNOWN; + + alx_reset_mac(hw); + + /* disable l0s/l1 */ + alx_enable_aspm(hw, false, false); + alx_irq_disable(alx); + alx_free_buffers(alx); +} + +static void alx_configure(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + + alx_configure_basic(hw); + alx_disable_rss(hw); + __alx_set_rx_mode(alx->dev); + + alx_write_mem32(hw, ALX_MAC_CTRL, hw->rx_ctrl); +} + +static void alx_activate(struct alx_priv *alx) +{ + /* hardware setting lost, restore it */ + alx_reinit_rings(alx); + alx_configure(alx); + + /* clear old interrupts */ + alx_write_mem32(&alx->hw, ALX_ISR, ~(u32)ALX_ISR_DIS); + + alx_irq_enable(alx); + + alx_schedule_link_check(alx); +} + +static void alx_reinit(struct alx_priv *alx) +{ + ASSERT_RTNL(); + + alx_halt(alx); + alx_activate(alx); +} + +static int alx_change_mtu(struct net_device *netdev, int mtu) +{ + struct alx_priv *alx = netdev_priv(netdev); + int max_frame = mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((max_frame < ALX_MIN_FRAME_SIZE) || + (max_frame > ALX_MAX_FRAME_SIZE)) + return -EINVAL; + + if (netdev->mtu == mtu) + return 0; + + netdev->mtu = mtu; + alx->hw.mtu = mtu; + alx->rxbuf_size = mtu > ALX_DEF_RXBUF_SIZE ? + ALIGN(max_frame, 8) : ALX_DEF_RXBUF_SIZE; + netdev_update_features(netdev); + if (netif_running(netdev)) + alx_reinit(alx); + return 0; +} + +static void alx_netif_start(struct alx_priv *alx) +{ + netif_tx_wake_all_queues(alx->dev); + napi_enable(&alx->napi); + netif_carrier_on(alx->dev); +} + +static int __alx_open(struct alx_priv *alx, bool resume) +{ + int err; + + if (!resume) + netif_carrier_off(alx->dev); + + err = alx_alloc_rings(alx); + if (err) + return err; + + alx_configure(alx); + + err = alx_request_irq(alx); + if (err) + goto out_free_rings; + + /* clear old interrupts */ + alx_write_mem32(&alx->hw, ALX_ISR, ~(u32)ALX_ISR_DIS); + + alx_irq_enable(alx); + + if (!resume) + netif_tx_start_all_queues(alx->dev); + + alx_schedule_link_check(alx); + return 0; + +out_free_rings: + alx_free_rings(alx); + return err; +} + +static void __alx_stop(struct alx_priv *alx) +{ + alx_halt(alx); + alx_free_irq(alx); + alx_free_rings(alx); +} + +static const char *alx_speed_desc(u16 speed) +{ + switch (speed) { + case SPEED_1000 + DUPLEX_FULL: + return "1 Gbps Full"; + case SPEED_100 + DUPLEX_FULL: + return "100 Mbps Full"; + case SPEED_100 + DUPLEX_HALF: + return "100 Mbps Half"; + case SPEED_10 + DUPLEX_FULL: + return "10 Mbps Full"; + case SPEED_10 + DUPLEX_HALF: + return "10 Mbps Half"; + default: + return "Unknown speed"; + } +} + +static void alx_check_link(struct alx_priv *alx) +{ + struct alx_hw *hw = &alx->hw; + unsigned long flags; + int speed, old_speed; + int err; + + /* clear PHY internal interrupt status, otherwise the main + * interrupt status will be asserted forever + */ + alx_clear_phy_intr(hw); + + err = alx_get_phy_link(hw, &speed); + if (err < 0) + goto reset; + + spin_lock_irqsave(&alx->irq_lock, flags); + alx->int_mask |= ALX_ISR_PHY; + alx_write_mem32(hw, ALX_IMR, alx->int_mask); + spin_unlock_irqrestore(&alx->irq_lock, flags); + + old_speed = hw->link_speed; + + if (old_speed == speed) + return; + hw->link_speed = speed; + + if (speed != SPEED_UNKNOWN) { + netif_info(alx, link, alx->dev, + "NIC Up: %s\n", alx_speed_desc(speed)); + alx_post_phy_link(hw); + alx_enable_aspm(hw, true, true); + alx_start_mac(hw); + + if (old_speed == SPEED_UNKNOWN) + alx_netif_start(alx); + } else { + /* link is now down */ + alx_netif_stop(alx); + netif_info(alx, link, alx->dev, "Link Down\n"); + err = alx_reset_mac(hw); + if (err) + goto reset; + alx_irq_disable(alx); + + /* MAC reset causes all HW settings to be lost, restore all */ + err = alx_reinit_rings(alx); + if (err) + goto reset; + alx_configure(alx); + alx_enable_aspm(hw, false, true); + alx_post_phy_link(hw); + alx_irq_enable(alx); + } + + return; + +reset: + alx_schedule_reset(alx); +} + +static int alx_open(struct net_device *netdev) +{ + return __alx_open(netdev_priv(netdev), false); +} + +static int alx_stop(struct net_device *netdev) +{ + __alx_stop(netdev_priv(netdev)); + return 0; +} + +static int __alx_shutdown(struct pci_dev *pdev, bool *wol_en) +{ + struct alx_priv *alx = pci_get_drvdata(pdev); + struct net_device *netdev = alx->dev; + struct alx_hw *hw = &alx->hw; + int err, speed; + + netif_device_detach(netdev); + + if (netif_running(netdev)) + __alx_stop(alx); + +#ifdef CONFIG_PM_SLEEP + err = pci_save_state(pdev); + if (err) + return err; +#endif + + err = alx_select_powersaving_speed(hw, &speed); + if (err) + return err; + err = alx_clear_phy_intr(hw); + if (err) + return err; + err = alx_pre_suspend(hw, speed); + if (err) + return err; + err = alx_config_wol(hw); + if (err) + return err; + + *wol_en = false; + if (hw->sleep_ctrl & ALX_SLEEP_ACTIVE) { + netif_info(alx, wol, netdev, + "wol: ctrl=%X, speed=%X\n", + hw->sleep_ctrl, speed); + device_set_wakeup_enable(&pdev->dev, true); + *wol_en = true; + } + + pci_disable_device(pdev); + + return 0; +} + +static void alx_shutdown(struct pci_dev *pdev) +{ + int err; + bool wol_en; + + err = __alx_shutdown(pdev, &wol_en); + if (!err) { + pci_wake_from_d3(pdev, wol_en); + pci_set_power_state(pdev, PCI_D3hot); + } else { + dev_err(&pdev->dev, "shutdown fail %d\n", err); + } +} + +static void alx_link_check(struct work_struct *work) +{ + struct alx_priv *alx; + + alx = container_of(work, struct alx_priv, link_check_wk); + + rtnl_lock(); + alx_check_link(alx); + rtnl_unlock(); +} + +static void alx_reset(struct work_struct *work) +{ + struct alx_priv *alx = container_of(work, struct alx_priv, reset_wk); + + rtnl_lock(); + alx_reinit(alx); + rtnl_unlock(); +} + +static int alx_tx_csum(struct sk_buff *skb, struct alx_txd *first) +{ + u8 cso, css; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + cso = skb_checksum_start_offset(skb); + if (cso & 1) + return -EINVAL; + + css = cso + skb->csum_offset; + first->word1 |= cpu_to_le32((cso >> 1) << TPD_CXSUMSTART_SHIFT); + first->word1 |= cpu_to_le32((css >> 1) << TPD_CXSUMOFFSET_SHIFT); + first->word1 |= cpu_to_le32(1 << TPD_CXSUM_EN_SHIFT); + + return 0; +} + +static int alx_map_tx_skb(struct alx_priv *alx, struct sk_buff *skb) +{ + struct alx_tx_queue *txq = &alx->txq; + struct alx_txd *tpd, *first_tpd; + dma_addr_t dma; + int maplen, f, first_idx = txq->write_idx; + + first_tpd = &txq->tpd[txq->write_idx]; + tpd = first_tpd; + + maplen = skb_headlen(skb); + dma = dma_map_single(&alx->hw.pdev->dev, skb->data, maplen, + DMA_TO_DEVICE); + if (dma_mapping_error(&alx->hw.pdev->dev, dma)) + goto err_dma; + + dma_unmap_len_set(&txq->bufs[txq->write_idx], size, maplen); + dma_unmap_addr_set(&txq->bufs[txq->write_idx], dma, dma); + + tpd->adrl.addr = cpu_to_le64(dma); + tpd->len = cpu_to_le16(maplen); + + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[f]; + + if (++txq->write_idx == alx->tx_ringsz) + txq->write_idx = 0; + tpd = &txq->tpd[txq->write_idx]; + + tpd->word1 = first_tpd->word1; + + maplen = skb_frag_size(frag); + dma = skb_frag_dma_map(&alx->hw.pdev->dev, frag, 0, + maplen, DMA_TO_DEVICE); + if (dma_mapping_error(&alx->hw.pdev->dev, dma)) + goto err_dma; + dma_unmap_len_set(&txq->bufs[txq->write_idx], size, maplen); + dma_unmap_addr_set(&txq->bufs[txq->write_idx], dma, dma); + + tpd->adrl.addr = cpu_to_le64(dma); + tpd->len = cpu_to_le16(maplen); + } + + /* last TPD, set EOP flag and store skb */ + tpd->word1 |= cpu_to_le32(1 << TPD_EOP_SHIFT); + txq->bufs[txq->write_idx].skb = skb; + + if (++txq->write_idx == alx->tx_ringsz) + txq->write_idx = 0; + + return 0; + +err_dma: + f = first_idx; + while (f != txq->write_idx) { + alx_free_txbuf(alx, f); + if (++f == alx->tx_ringsz) + f = 0; + } + return -ENOMEM; +} + +static netdev_tx_t alx_start_xmit(struct sk_buff *skb, + struct net_device *netdev) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_tx_queue *txq = &alx->txq; + struct alx_txd *first; + int tpdreq = skb_shinfo(skb)->nr_frags + 1; + + if (alx_tpd_avail(alx) < tpdreq) { + netif_stop_queue(alx->dev); + goto drop; + } + + first = &txq->tpd[txq->write_idx]; + memset(first, 0, sizeof(*first)); + + if (alx_tx_csum(skb, first)) + goto drop; + + if (alx_map_tx_skb(alx, skb) < 0) + goto drop; + + netdev_sent_queue(alx->dev, skb->len); + + /* flush updates before updating hardware */ + wmb(); + alx_write_mem16(&alx->hw, ALX_TPD_PRI0_PIDX, txq->write_idx); + + if (alx_tpd_avail(alx) < alx->tx_ringsz/8) + netif_stop_queue(alx->dev); + + return NETDEV_TX_OK; + +drop: + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static void alx_tx_timeout(struct net_device *dev) +{ + struct alx_priv *alx = netdev_priv(dev); + + alx_schedule_reset(alx); +} + +static int alx_mdio_read(struct net_device *netdev, + int prtad, int devad, u16 addr) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + u16 val; + int err; + + if (prtad != hw->mdio.prtad) + return -EINVAL; + + if (devad == MDIO_DEVAD_NONE) + err = alx_read_phy_reg(hw, addr, &val); + else + err = alx_read_phy_ext(hw, devad, addr, &val); + + if (err) + return err; + return val; +} + +static int alx_mdio_write(struct net_device *netdev, + int prtad, int devad, u16 addr, u16 val) +{ + struct alx_priv *alx = netdev_priv(netdev); + struct alx_hw *hw = &alx->hw; + + if (prtad != hw->mdio.prtad) + return -EINVAL; + + if (devad == MDIO_DEVAD_NONE) + return alx_write_phy_reg(hw, addr, val); + + return alx_write_phy_ext(hw, devad, addr, val); +} + +static int alx_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct alx_priv *alx = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EAGAIN; + + return mdio_mii_ioctl(&alx->hw.mdio, if_mii(ifr), cmd); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void alx_poll_controller(struct net_device *netdev) +{ + struct alx_priv *alx = netdev_priv(netdev); + + if (alx->msi) + alx_intr_msi(0, alx); + else + alx_intr_legacy(0, alx); +} +#endif + +static const struct net_device_ops alx_netdev_ops = { + .ndo_open = alx_open, + .ndo_stop = alx_stop, + .ndo_start_xmit = alx_start_xmit, + .ndo_set_rx_mode = alx_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = alx_set_mac_address, + .ndo_change_mtu = alx_change_mtu, + .ndo_do_ioctl = alx_ioctl, + .ndo_tx_timeout = alx_tx_timeout, + .ndo_fix_features = alx_fix_features, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = alx_poll_controller, +#endif +}; + +static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct alx_priv *alx; + struct alx_hw *hw; + bool phy_configured; + int bars, pm_cap, err; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + /* The alx chip can DMA to 64-bit addresses, but it uses a single + * shared register for the high 32 bits, so only a single, aligned, + * 4 GB physical address range can be used for descriptors. + */ + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && + !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { + dev_dbg(&pdev->dev, "DMA to 64-BIT addresses\n"); + } else { + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, + "No usable DMA config, aborting\n"); + goto out_pci_disable; + } + } + } + + bars = pci_select_bars(pdev, IORESOURCE_MEM); + err = pci_request_selected_regions(pdev, bars, alx_drv_name); + if (err) { + dev_err(&pdev->dev, + "pci_request_selected_regions failed(bars:%d)\n", bars); + goto out_pci_disable; + } + + pci_enable_pcie_error_reporting(pdev); + pci_set_master(pdev); + + pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pm_cap == 0) { + dev_err(&pdev->dev, + "Can't find power management capability, aborting\n"); + err = -EIO; + goto out_pci_release; + } + + err = pci_set_power_state(pdev, PCI_D0); + if (err) + goto out_pci_release; + + netdev = alloc_etherdev(sizeof(*alx)); + if (!netdev) { + err = -ENOMEM; + goto out_pci_release; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + alx = netdev_priv(netdev); + alx->dev = netdev; + alx->hw.pdev = pdev; + alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP | + NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR | NETIF_MSG_WOL; + hw = &alx->hw; + pci_set_drvdata(pdev, alx); + + hw->hw_addr = pci_ioremap_bar(pdev, 0); + if (!hw->hw_addr) { + dev_err(&pdev->dev, "cannot map device registers\n"); + err = -EIO; + goto out_free_netdev; + } + + netdev->netdev_ops = &alx_netdev_ops; + SET_ETHTOOL_OPS(netdev, &alx_ethtool_ops); + netdev->irq = pdev->irq; + netdev->watchdog_timeo = ALX_WATCHDOG_TIME; + + if (ent->driver_data & ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG) + pdev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; + + err = alx_init_sw(alx); + if (err) { + dev_err(&pdev->dev, "net device private data init failed\n"); + goto out_unmap; + } + + alx_reset_pcie(hw); + + phy_configured = alx_phy_configured(hw); + + if (!phy_configured) + alx_reset_phy(hw); + + err = alx_reset_mac(hw); + if (err) { + dev_err(&pdev->dev, "MAC Reset failed, error = %d\n", err); + goto out_unmap; + } + + /* setup link to put it in a known good starting state */ + if (!phy_configured) { + err = alx_setup_speed_duplex(hw, hw->adv_cfg, hw->flowctrl); + if (err) { + dev_err(&pdev->dev, + "failed to configure PHY speed/duplex (err=%d)\n", + err); + goto out_unmap; + } + } + + netdev->hw_features = NETIF_F_SG | NETIF_F_HW_CSUM; + + if (alx_get_perm_macaddr(hw, hw->perm_addr)) { + dev_warn(&pdev->dev, + "Invalid permanent address programmed, using random one\n"); + eth_hw_addr_random(netdev); + memcpy(hw->perm_addr, netdev->dev_addr, netdev->addr_len); + } + + memcpy(hw->mac_addr, hw->perm_addr, ETH_ALEN); + memcpy(netdev->dev_addr, hw->mac_addr, ETH_ALEN); + memcpy(netdev->perm_addr, hw->perm_addr, ETH_ALEN); + + hw->mdio.prtad = 0; + hw->mdio.mmds = 0; + hw->mdio.dev = netdev; + hw->mdio.mode_support = MDIO_SUPPORTS_C45 | + MDIO_SUPPORTS_C22 | + MDIO_EMULATE_C22; + hw->mdio.mdio_read = alx_mdio_read; + hw->mdio.mdio_write = alx_mdio_write; + + if (!alx_get_phy_info(hw)) { + dev_err(&pdev->dev, "failed to identify PHY\n"); + err = -EIO; + goto out_unmap; + } + + INIT_WORK(&alx->link_check_wk, alx_link_check); + INIT_WORK(&alx->reset_wk, alx_reset); + spin_lock_init(&alx->hw.mdio_lock); + spin_lock_init(&alx->irq_lock); + + netif_carrier_off(netdev); + + err = register_netdev(netdev); + if (err) { + dev_err(&pdev->dev, "register netdevice failed\n"); + goto out_unmap; + } + + device_set_wakeup_enable(&pdev->dev, hw->sleep_ctrl); + + netdev_info(netdev, + "Qualcomm Atheros AR816x/AR817x Ethernet [%pM]\n", + netdev->dev_addr); + + return 0; + +out_unmap: + iounmap(hw->hw_addr); +out_free_netdev: + free_netdev(netdev); +out_pci_release: + pci_release_selected_regions(pdev, bars); +out_pci_disable: + pci_disable_device(pdev); + return err; +} + +static void alx_remove(struct pci_dev *pdev) +{ + struct alx_priv *alx = pci_get_drvdata(pdev); + struct alx_hw *hw = &alx->hw; + + cancel_work_sync(&alx->link_check_wk); + cancel_work_sync(&alx->reset_wk); + + /* restore permanent mac address */ + alx_set_macaddr(hw, hw->perm_addr); + + unregister_netdev(alx->dev); + iounmap(hw->hw_addr); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + + free_netdev(alx->dev); +} + +#ifdef CONFIG_PM_SLEEP +static int alx_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int err; + bool wol_en; + + err = __alx_shutdown(pdev, &wol_en); + if (err) { + dev_err(&pdev->dev, "shutdown fail in suspend %d\n", err); + return err; + } + + if (wol_en) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + +static int alx_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct alx_priv *alx = pci_get_drvdata(pdev); + struct net_device *netdev = alx->dev; + struct alx_hw *hw = &alx->hw; + int err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_save_state(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + hw->link_speed = SPEED_UNKNOWN; + alx->int_mask = ALX_ISR_MISC; + + alx_reset_pcie(hw); + alx_reset_phy(hw); + + err = alx_reset_mac(hw); + if (err) { + netif_err(alx, hw, alx->dev, + "resume:reset_mac fail %d\n", err); + return -EIO; + } + + err = alx_setup_speed_duplex(hw, hw->adv_cfg, hw->flowctrl); + if (err) { + netif_err(alx, hw, alx->dev, + "resume:setup_speed_duplex fail %d\n", err); + return -EIO; + } + + if (netif_running(netdev)) { + err = __alx_open(alx, true); + if (err) + return err; + } + + netif_device_attach(netdev); + + return err; +} +#endif + +static pci_ers_result_t alx_pci_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct alx_priv *alx = pci_get_drvdata(pdev); + struct net_device *netdev = alx->dev; + pci_ers_result_t rc = PCI_ERS_RESULT_NEED_RESET; + + dev_info(&pdev->dev, "pci error detected\n"); + + rtnl_lock(); + + if (netif_running(netdev)) { + netif_device_detach(netdev); + alx_halt(alx); + } + + if (state == pci_channel_io_perm_failure) + rc = PCI_ERS_RESULT_DISCONNECT; + else + pci_disable_device(pdev); + + rtnl_unlock(); + + return rc; +} + +static pci_ers_result_t alx_pci_error_slot_reset(struct pci_dev *pdev) +{ + struct alx_priv *alx = pci_get_drvdata(pdev); + struct alx_hw *hw = &alx->hw; + pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT; + + dev_info(&pdev->dev, "pci error slot reset\n"); + + rtnl_lock(); + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, "Failed to re-enable PCI device after reset\n"); + goto out; + } + + pci_set_master(pdev); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + alx_reset_pcie(hw); + if (!alx_reset_mac(hw)) + rc = PCI_ERS_RESULT_RECOVERED; +out: + pci_cleanup_aer_uncorrect_error_status(pdev); + + rtnl_unlock(); + + return rc; +} + +static void alx_pci_error_resume(struct pci_dev *pdev) +{ + struct alx_priv *alx = pci_get_drvdata(pdev); + struct net_device *netdev = alx->dev; + + dev_info(&pdev->dev, "pci error resume\n"); + + rtnl_lock(); + + if (netif_running(netdev)) { + alx_activate(alx); + netif_device_attach(netdev); + } + + rtnl_unlock(); +} + +static const struct pci_error_handlers alx_err_handlers = { + .error_detected = alx_pci_error_detected, + .slot_reset = alx_pci_error_slot_reset, + .resume = alx_pci_error_resume, +}; + +#ifdef CONFIG_PM_SLEEP +static SIMPLE_DEV_PM_OPS(alx_pm_ops, alx_suspend, alx_resume); +#define ALX_PM_OPS (&alx_pm_ops) +#else +#define ALX_PM_OPS NULL +#endif + +static DEFINE_PCI_DEVICE_TABLE(alx_pci_tbl) = { + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8161), + .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_E2200), + .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8162), + .driver_data = ALX_DEV_QUIRK_MSI_INTX_DISABLE_BUG }, + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8171) }, + { PCI_VDEVICE(ATTANSIC, ALX_DEV_ID_AR8172) }, + {} +}; + +static struct pci_driver alx_driver = { + .name = alx_drv_name, + .id_table = alx_pci_tbl, + .probe = alx_probe, + .remove = alx_remove, + .shutdown = alx_shutdown, + .err_handler = &alx_err_handlers, + .driver.pm = ALX_PM_OPS, +}; + +module_pci_driver(alx_driver); +MODULE_DEVICE_TABLE(pci, alx_pci_tbl); +MODULE_AUTHOR("Johannes Berg "); +MODULE_AUTHOR("Qualcomm Corporation, "); +MODULE_DESCRIPTION( + "Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/atheros/alx/reg.h b/drivers/net/ethernet/atheros/alx/reg.h new file mode 100644 index 000000000000..e4358c98bc4e --- /dev/null +++ b/drivers/net/ethernet/atheros/alx/reg.h @@ -0,0 +1,810 @@ +/* + * Copyright (c) 2013 Johannes Berg + * + * This file is free software: you may copy, redistribute and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 2 of the License, or (at your + * option) any later version. + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * This file incorporates work covered by the following copyright and + * permission notice: + * + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef ALX_REG_H +#define ALX_REG_H + +#define ALX_DEV_ID_AR8161 0x1091 +#define ALX_DEV_ID_E2200 0xe091 +#define ALX_DEV_ID_AR8162 0x1090 +#define ALX_DEV_ID_AR8171 0x10A1 +#define ALX_DEV_ID_AR8172 0x10A0 + +/* rev definition, + * bit(0): with xD support + * bit(1): with Card Reader function + * bit(7:2): real revision + */ +#define ALX_PCI_REVID_SHIFT 3 +#define ALX_REV_A0 0 +#define ALX_REV_A1 1 +#define ALX_REV_B0 2 +#define ALX_REV_C0 3 + +#define ALX_DEV_CTRL 0x0060 +#define ALX_DEV_CTRL_MAXRRS_MIN 2 + +#define ALX_MSIX_MASK 0x0090 + +#define ALX_UE_SVRT 0x010C +#define ALX_UE_SVRT_FCPROTERR BIT(13) +#define ALX_UE_SVRT_DLPROTERR BIT(4) + +/* eeprom & flash load register */ +#define ALX_EFLD 0x0204 +#define ALX_EFLD_F_EXIST BIT(10) +#define ALX_EFLD_E_EXIST BIT(9) +#define ALX_EFLD_STAT BIT(5) +#define ALX_EFLD_START BIT(0) + +/* eFuse load register */ +#define ALX_SLD 0x0218 +#define ALX_SLD_STAT BIT(12) +#define ALX_SLD_START BIT(11) +#define ALX_SLD_MAX_TO 100 + +#define ALX_PDLL_TRNS1 0x1104 +#define ALX_PDLL_TRNS1_D3PLLOFF_EN BIT(11) + +#define ALX_PMCTRL 0x12F8 +#define ALX_PMCTRL_HOTRST_WTEN BIT(31) +/* bit30: L0s/L1 controlled by MAC based on throughput(setting in 15A0) */ +#define ALX_PMCTRL_ASPM_FCEN BIT(30) +#define ALX_PMCTRL_SADLY_EN BIT(29) +#define ALX_PMCTRL_LCKDET_TIMER_MASK 0xF +#define ALX_PMCTRL_LCKDET_TIMER_SHIFT 24 +#define ALX_PMCTRL_LCKDET_TIMER_DEF 0xC +/* bit[23:20] if pm_request_l1 time > @, then enter L0s not L1 */ +#define ALX_PMCTRL_L1REQ_TO_MASK 0xF +#define ALX_PMCTRL_L1REQ_TO_SHIFT 20 +#define ALX_PMCTRL_L1REG_TO_DEF 0xF +#define ALX_PMCTRL_TXL1_AFTER_L0S BIT(19) +#define ALX_PMCTRL_L1_TIMER_MASK 0x7 +#define ALX_PMCTRL_L1_TIMER_SHIFT 16 +#define ALX_PMCTRL_L1_TIMER_16US 4 +#define ALX_PMCTRL_RCVR_WT_1US BIT(15) +/* bit13: enable pcie clk switch in L1 state */ +#define ALX_PMCTRL_L1_CLKSW_EN BIT(13) +#define ALX_PMCTRL_L0S_EN BIT(12) +#define ALX_PMCTRL_RXL1_AFTER_L0S BIT(11) +#define ALX_PMCTRL_L1_BUFSRX_EN BIT(7) +/* bit6: power down serdes RX */ +#define ALX_PMCTRL_L1_SRDSRX_PWD BIT(6) +#define ALX_PMCTRL_L1_SRDSPLL_EN BIT(5) +#define ALX_PMCTRL_L1_SRDS_EN BIT(4) +#define ALX_PMCTRL_L1_EN BIT(3) + +/*******************************************************/ +/* following registers are mapped only to memory space */ +/*******************************************************/ + +#define ALX_MASTER 0x1400 +/* bit12: 1:alwys select pclk from serdes, not sw to 25M */ +#define ALX_MASTER_PCLKSEL_SRDS BIT(12) +/* bit11: irq moduration for rx */ +#define ALX_MASTER_IRQMOD2_EN BIT(11) +/* bit10: irq moduration for tx/rx */ +#define ALX_MASTER_IRQMOD1_EN BIT(10) +#define ALX_MASTER_SYSALVTIMER_EN BIT(7) +#define ALX_MASTER_OOB_DIS BIT(6) +/* bit5: wakeup without pcie clk */ +#define ALX_MASTER_WAKEN_25M BIT(5) +/* bit0: MAC & DMA reset */ +#define ALX_MASTER_DMA_MAC_RST BIT(0) +#define ALX_DMA_MAC_RST_TO 50 + +#define ALX_IRQ_MODU_TIMER 0x1408 +#define ALX_IRQ_MODU_TIMER1_MASK 0xFFFF +#define ALX_IRQ_MODU_TIMER1_SHIFT 0 + +#define ALX_PHY_CTRL 0x140C +#define ALX_PHY_CTRL_100AB_EN BIT(17) +/* bit14: affect MAC & PHY, go to low power sts */ +#define ALX_PHY_CTRL_POWER_DOWN BIT(14) +/* bit13: 1:pll always ON, 0:can switch in lpw */ +#define ALX_PHY_CTRL_PLL_ON BIT(13) +#define ALX_PHY_CTRL_RST_ANALOG BIT(12) +#define ALX_PHY_CTRL_HIB_PULSE BIT(11) +#define ALX_PHY_CTRL_HIB_EN BIT(10) +#define ALX_PHY_CTRL_IDDQ BIT(7) +#define ALX_PHY_CTRL_GATE_25M BIT(5) +#define ALX_PHY_CTRL_LED_MODE BIT(2) +/* bit0: out of dsp RST state */ +#define ALX_PHY_CTRL_DSPRST_OUT BIT(0) +#define ALX_PHY_CTRL_DSPRST_TO 80 +#define ALX_PHY_CTRL_CLS (ALX_PHY_CTRL_LED_MODE | \ + ALX_PHY_CTRL_100AB_EN | \ + ALX_PHY_CTRL_PLL_ON) + +#define ALX_MAC_STS 0x1410 +#define ALX_MAC_STS_TXQ_BUSY BIT(3) +#define ALX_MAC_STS_RXQ_BUSY BIT(2) +#define ALX_MAC_STS_TXMAC_BUSY BIT(1) +#define ALX_MAC_STS_RXMAC_BUSY BIT(0) +#define ALX_MAC_STS_IDLE (ALX_MAC_STS_TXQ_BUSY | \ + ALX_MAC_STS_RXQ_BUSY | \ + ALX_MAC_STS_TXMAC_BUSY | \ + ALX_MAC_STS_RXMAC_BUSY) + +#define ALX_MDIO 0x1414 +#define ALX_MDIO_MODE_EXT BIT(30) +#define ALX_MDIO_BUSY BIT(27) +#define ALX_MDIO_CLK_SEL_MASK 0x7 +#define ALX_MDIO_CLK_SEL_SHIFT 24 +#define ALX_MDIO_CLK_SEL_25MD4 0 +#define ALX_MDIO_CLK_SEL_25MD128 7 +#define ALX_MDIO_START BIT(23) +#define ALX_MDIO_SPRES_PRMBL BIT(22) +/* bit21: 1:read,0:write */ +#define ALX_MDIO_OP_READ BIT(21) +#define ALX_MDIO_REG_MASK 0x1F +#define ALX_MDIO_REG_SHIFT 16 +#define ALX_MDIO_DATA_MASK 0xFFFF +#define ALX_MDIO_DATA_SHIFT 0 +#define ALX_MDIO_MAX_AC_TO 120 + +#define ALX_MDIO_EXTN 0x1448 +#define ALX_MDIO_EXTN_DEVAD_MASK 0x1F +#define ALX_MDIO_EXTN_DEVAD_SHIFT 16 +#define ALX_MDIO_EXTN_REG_MASK 0xFFFF +#define ALX_MDIO_EXTN_REG_SHIFT 0 + +#define ALX_SERDES 0x1424 +#define ALX_SERDES_PHYCLK_SLWDWN BIT(18) +#define ALX_SERDES_MACCLK_SLWDWN BIT(17) + +#define ALX_LPI_CTRL 0x1440 +#define ALX_LPI_CTRL_EN BIT(0) + +/* for B0+, bit[13..] for C0+ */ +#define ALX_HRTBT_EXT_CTRL 0x1AD0 +#define L1F_HRTBT_EXT_CTRL_PERIOD_HIGH_MASK 0x3F +#define L1F_HRTBT_EXT_CTRL_PERIOD_HIGH_SHIFT 24 +#define L1F_HRTBT_EXT_CTRL_SWOI_STARTUP_PKT_EN BIT(23) +#define L1F_HRTBT_EXT_CTRL_IOAC_2_FRAGMENTED BIT(22) +#define L1F_HRTBT_EXT_CTRL_IOAC_1_FRAGMENTED BIT(21) +#define L1F_HRTBT_EXT_CTRL_IOAC_1_KEEPALIVE_EN BIT(20) +#define L1F_HRTBT_EXT_CTRL_IOAC_1_HAS_VLAN BIT(19) +#define L1F_HRTBT_EXT_CTRL_IOAC_1_IS_8023 BIT(18) +#define L1F_HRTBT_EXT_CTRL_IOAC_1_IS_IPV6 BIT(17) +#define L1F_HRTBT_EXT_CTRL_IOAC_2_KEEPALIVE_EN BIT(16) +#define L1F_HRTBT_EXT_CTRL_IOAC_2_HAS_VLAN BIT(15) +#define L1F_HRTBT_EXT_CTRL_IOAC_2_IS_8023 BIT(14) +#define L1F_HRTBT_EXT_CTRL_IOAC_2_IS_IPV6 BIT(13) +#define ALX_HRTBT_EXT_CTRL_NS_EN BIT(12) +#define ALX_HRTBT_EXT_CTRL_FRAG_LEN_MASK 0xFF +#define ALX_HRTBT_EXT_CTRL_FRAG_LEN_SHIFT 4 +#define ALX_HRTBT_EXT_CTRL_IS_8023 BIT(3) +#define ALX_HRTBT_EXT_CTRL_IS_IPV6 BIT(2) +#define ALX_HRTBT_EXT_CTRL_WAKEUP_EN BIT(1) +#define ALX_HRTBT_EXT_CTRL_ARP_EN BIT(0) + +#define ALX_HRTBT_REM_IPV4_ADDR 0x1AD4 +#define ALX_HRTBT_HOST_IPV4_ADDR 0x1478 +#define ALX_HRTBT_REM_IPV6_ADDR3 0x1AD8 +#define ALX_HRTBT_REM_IPV6_ADDR2 0x1ADC +#define ALX_HRTBT_REM_IPV6_ADDR1 0x1AE0 +#define ALX_HRTBT_REM_IPV6_ADDR0 0x1AE4 + +/* 1B8C ~ 1B94 for C0+ */ +#define ALX_SWOI_ACER_CTRL 0x1B8C +#define ALX_SWOI_ORIG_ACK_NAK_EN BIT(20) +#define ALX_SWOI_ORIG_ACK_NAK_PKT_LEN_MASK 0XFF +#define ALX_SWOI_ORIG_ACK_NAK_PKT_LEN_SHIFT 12 +#define ALX_SWOI_ORIG_ACK_ADDR_MASK 0XFFF +#define ALX_SWOI_ORIG_ACK_ADDR_SHIFT 0 + +#define ALX_SWOI_IOAC_CTRL_2 0x1B90 +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_FRAG_LEN_MASK 0xFF +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_FRAG_LEN_SHIFT 24 +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_PKT_LEN_MASK 0xFFF +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_PKT_LEN_SHIFT 12 +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_HDR_ADDR_MASK 0xFFF +#define ALX_SWOI_IOAC_CTRL_2_SWOI_1_HDR_ADDR_SHIFT 0 + +#define ALX_SWOI_IOAC_CTRL_3 0x1B94 +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_FRAG_LEN_MASK 0xFF +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_FRAG_LEN_SHIFT 24 +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_PKT_LEN_MASK 0xFFF +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_PKT_LEN_SHIFT 12 +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_HDR_ADDR_MASK 0xFFF +#define ALX_SWOI_IOAC_CTRL_3_SWOI_2_HDR_ADDR_SHIFT 0 + +/* for B0 */ +#define ALX_IDLE_DECISN_TIMER 0x1474 +/* 1ms */ +#define ALX_IDLE_DECISN_TIMER_DEF 0x400 + +#define ALX_MAC_CTRL 0x1480 +#define ALX_MAC_CTRL_FAST_PAUSE BIT(31) +#define ALX_MAC_CTRL_WOLSPED_SWEN BIT(30) +/* bit29: 1:legacy(hi5b), 0:marvl(lo5b)*/ +#define ALX_MAC_CTRL_MHASH_ALG_HI5B BIT(29) +#define ALX_MAC_CTRL_BRD_EN BIT(26) +#define ALX_MAC_CTRL_MULTIALL_EN BIT(25) +#define ALX_MAC_CTRL_SPEED_MASK 0x3 +#define ALX_MAC_CTRL_SPEED_SHIFT 20 +#define ALX_MAC_CTRL_SPEED_10_100 1 +#define ALX_MAC_CTRL_SPEED_1000 2 +#define ALX_MAC_CTRL_PROMISC_EN BIT(15) +#define ALX_MAC_CTRL_VLANSTRIP BIT(14) +#define ALX_MAC_CTRL_PRMBLEN_MASK 0xF +#define ALX_MAC_CTRL_PRMBLEN_SHIFT 10 +#define ALX_MAC_CTRL_PCRCE BIT(7) +#define ALX_MAC_CTRL_CRCE BIT(6) +#define ALX_MAC_CTRL_FULLD BIT(5) +#define ALX_MAC_CTRL_RXFC_EN BIT(3) +#define ALX_MAC_CTRL_TXFC_EN BIT(2) +#define ALX_MAC_CTRL_RX_EN BIT(1) +#define ALX_MAC_CTRL_TX_EN BIT(0) + +#define ALX_STAD0 0x1488 +#define ALX_STAD1 0x148C + +#define ALX_HASH_TBL0 0x1490 +#define ALX_HASH_TBL1 0x1494 + +#define ALX_MTU 0x149C +#define ALX_MTU_JUMBO_TH 1514 +#define ALX_MTU_STD_ALGN 1536 + +#define ALX_SRAM5 0x1524 +#define ALX_SRAM_RXF_LEN_MASK 0xFFF +#define ALX_SRAM_RXF_LEN_SHIFT 0 +#define ALX_SRAM_RXF_LEN_8K (8*1024) + +#define ALX_SRAM9 0x1534 +#define ALX_SRAM_LOAD_PTR BIT(0) + +#define ALX_RX_BASE_ADDR_HI 0x1540 + +#define ALX_TX_BASE_ADDR_HI 0x1544 + +#define ALX_RFD_ADDR_LO 0x1550 +#define ALX_RFD_RING_SZ 0x1560 +#define ALX_RFD_BUF_SZ 0x1564 + +#define ALX_RRD_ADDR_LO 0x1568 +#define ALX_RRD_RING_SZ 0x1578 + +/* pri3: highest, pri0: lowest */ +#define ALX_TPD_PRI3_ADDR_LO 0x14E4 +#define ALX_TPD_PRI2_ADDR_LO 0x14E0 +#define ALX_TPD_PRI1_ADDR_LO 0x157C +#define ALX_TPD_PRI0_ADDR_LO 0x1580 + +/* producer index is 16bit */ +#define ALX_TPD_PRI3_PIDX 0x1618 +#define ALX_TPD_PRI2_PIDX 0x161A +#define ALX_TPD_PRI1_PIDX 0x15F0 +#define ALX_TPD_PRI0_PIDX 0x15F2 + +/* consumer index is 16bit */ +#define ALX_TPD_PRI3_CIDX 0x161C +#define ALX_TPD_PRI2_CIDX 0x161E +#define ALX_TPD_PRI1_CIDX 0x15F4 +#define ALX_TPD_PRI0_CIDX 0x15F6 + +#define ALX_TPD_RING_SZ 0x1584 + +#define ALX_TXQ0 0x1590 +#define ALX_TXQ0_TXF_BURST_PREF_MASK 0xFFFF +#define ALX_TXQ0_TXF_BURST_PREF_SHIFT 16 +#define ALX_TXQ_TXF_BURST_PREF_DEF 0x200 +#define ALX_TXQ0_LSO_8023_EN BIT(7) +#define ALX_TXQ0_MODE_ENHANCE BIT(6) +#define ALX_TXQ0_EN BIT(5) +#define ALX_TXQ0_SUPT_IPOPT BIT(4) +#define ALX_TXQ0_TPD_BURSTPREF_MASK 0xF +#define ALX_TXQ0_TPD_BURSTPREF_SHIFT 0 +#define ALX_TXQ_TPD_BURSTPREF_DEF 5 + +#define ALX_TXQ1 0x1594 +/* bit11: drop large packet, len > (rfd buf) */ +#define ALX_TXQ1_ERRLGPKT_DROP_EN BIT(11) +#define ALX_TXQ1_JUMBO_TSO_TH (7*1024) + +#define ALX_RXQ0 0x15A0 +#define ALX_RXQ0_EN BIT(31) +#define ALX_RXQ0_RSS_HASH_EN BIT(29) +#define ALX_RXQ0_RSS_MODE_MASK 0x3 +#define ALX_RXQ0_RSS_MODE_SHIFT 26 +#define ALX_RXQ0_RSS_MODE_DIS 0 +#define ALX_RXQ0_RSS_MODE_MQMI 3 +#define ALX_RXQ0_NUM_RFD_PREF_MASK 0x3F +#define ALX_RXQ0_NUM_RFD_PREF_SHIFT 20 +#define ALX_RXQ0_NUM_RFD_PREF_DEF 8 +#define ALX_RXQ0_IDT_TBL_SIZE_MASK 0x1FF +#define ALX_RXQ0_IDT_TBL_SIZE_SHIFT 8 +#define ALX_RXQ0_IDT_TBL_SIZE_DEF 0x100 +#define ALX_RXQ0_IDT_TBL_SIZE_NORMAL 128 +#define ALX_RXQ0_IPV6_PARSE_EN BIT(7) +#define ALX_RXQ0_RSS_HSTYP_MASK 0xF +#define ALX_RXQ0_RSS_HSTYP_SHIFT 2 +#define ALX_RXQ0_RSS_HSTYP_IPV6_TCP_EN BIT(5) +#define ALX_RXQ0_RSS_HSTYP_IPV6_EN BIT(4) +#define ALX_RXQ0_RSS_HSTYP_IPV4_TCP_EN BIT(3) +#define ALX_RXQ0_RSS_HSTYP_IPV4_EN BIT(2) +#define ALX_RXQ0_RSS_HSTYP_ALL (ALX_RXQ0_RSS_HSTYP_IPV6_TCP_EN | \ + ALX_RXQ0_RSS_HSTYP_IPV4_TCP_EN | \ + ALX_RXQ0_RSS_HSTYP_IPV6_EN | \ + ALX_RXQ0_RSS_HSTYP_IPV4_EN) +#define ALX_RXQ0_ASPM_THRESH_MASK 0x3 +#define ALX_RXQ0_ASPM_THRESH_SHIFT 0 +#define ALX_RXQ0_ASPM_THRESH_100M 3 + +#define ALX_RXQ2 0x15A8 +#define ALX_RXQ2_RXF_XOFF_THRESH_MASK 0xFFF +#define ALX_RXQ2_RXF_XOFF_THRESH_SHIFT 16 +#define ALX_RXQ2_RXF_XON_THRESH_MASK 0xFFF +#define ALX_RXQ2_RXF_XON_THRESH_SHIFT 0 +/* Size = tx-packet(1522) + IPG(12) + SOF(8) + 64(Pause) + IPG(12) + SOF(8) + + * rx-packet(1522) + delay-of-link(64) + * = 3212. + */ +#define ALX_RXQ2_RXF_FLOW_CTRL_RSVD 3212 + +#define ALX_DMA 0x15C0 +#define ALX_DMA_RCHNL_SEL_MASK 0x3 +#define ALX_DMA_RCHNL_SEL_SHIFT 26 +#define ALX_DMA_WDLY_CNT_MASK 0xF +#define ALX_DMA_WDLY_CNT_SHIFT 16 +#define ALX_DMA_WDLY_CNT_DEF 4 +#define ALX_DMA_RDLY_CNT_MASK 0x1F +#define ALX_DMA_RDLY_CNT_SHIFT 11 +#define ALX_DMA_RDLY_CNT_DEF 15 +/* bit10: 0:tpd with pri, 1: data */ +#define ALX_DMA_RREQ_PRI_DATA BIT(10) +#define ALX_DMA_RREQ_BLEN_MASK 0x7 +#define ALX_DMA_RREQ_BLEN_SHIFT 4 +#define ALX_DMA_RORDER_MODE_MASK 0x7 +#define ALX_DMA_RORDER_MODE_SHIFT 0 +#define ALX_DMA_RORDER_MODE_OUT 4 + +#define ALX_WOL0 0x14A0 +#define ALX_WOL0_PME_LINK BIT(5) +#define ALX_WOL0_LINK_EN BIT(4) +#define ALX_WOL0_PME_MAGIC_EN BIT(3) +#define ALX_WOL0_MAGIC_EN BIT(2) + +#define ALX_RFD_PIDX 0x15E0 + +#define ALX_RFD_CIDX 0x15F8 + +/* MIB */ +#define ALX_MIB_BASE 0x1700 +#define ALX_MIB_RX_OK (ALX_MIB_BASE + 0) +#define ALX_MIB_RX_ERRADDR (ALX_MIB_BASE + 92) +#define ALX_MIB_TX_OK (ALX_MIB_BASE + 96) +#define ALX_MIB_TX_MCCNT (ALX_MIB_BASE + 192) + +#define ALX_RX_STATS_BIN ALX_MIB_RX_OK +#define ALX_RX_STATS_END ALX_MIB_RX_ERRADDR +#define ALX_TX_STATS_BIN ALX_MIB_TX_OK +#define ALX_TX_STATS_END ALX_MIB_TX_MCCNT + +#define ALX_ISR 0x1600 +#define ALX_ISR_DIS BIT(31) +#define ALX_ISR_RX_Q7 BIT(30) +#define ALX_ISR_RX_Q6 BIT(29) +#define ALX_ISR_RX_Q5 BIT(28) +#define ALX_ISR_RX_Q4 BIT(27) +#define ALX_ISR_PCIE_LNKDOWN BIT(26) +#define ALX_ISR_RX_Q3 BIT(19) +#define ALX_ISR_RX_Q2 BIT(18) +#define ALX_ISR_RX_Q1 BIT(17) +#define ALX_ISR_RX_Q0 BIT(16) +#define ALX_ISR_TX_Q0 BIT(15) +#define ALX_ISR_PHY BIT(12) +#define ALX_ISR_DMAW BIT(10) +#define ALX_ISR_DMAR BIT(9) +#define ALX_ISR_TXF_UR BIT(8) +#define ALX_ISR_TX_Q3 BIT(7) +#define ALX_ISR_TX_Q2 BIT(6) +#define ALX_ISR_TX_Q1 BIT(5) +#define ALX_ISR_RFD_UR BIT(4) +#define ALX_ISR_RXF_OV BIT(3) +#define ALX_ISR_MANU BIT(2) +#define ALX_ISR_TIMER BIT(1) +#define ALX_ISR_SMB BIT(0) + +#define ALX_IMR 0x1604 + +/* re-send assert msg if SW no response */ +#define ALX_INT_RETRIG 0x1608 +/* 40ms */ +#define ALX_INT_RETRIG_TO 20000 + +#define ALX_SMB_TIMER 0x15C4 + +#define ALX_TINT_TPD_THRSHLD 0x15C8 + +#define ALX_TINT_TIMER 0x15CC + +#define ALX_CLK_GATE 0x1814 +#define ALX_CLK_GATE_RXMAC BIT(5) +#define ALX_CLK_GATE_TXMAC BIT(4) +#define ALX_CLK_GATE_RXQ BIT(3) +#define ALX_CLK_GATE_TXQ BIT(2) +#define ALX_CLK_GATE_DMAR BIT(1) +#define ALX_CLK_GATE_DMAW BIT(0) +#define ALX_CLK_GATE_ALL (ALX_CLK_GATE_RXMAC | \ + ALX_CLK_GATE_TXMAC | \ + ALX_CLK_GATE_RXQ | \ + ALX_CLK_GATE_TXQ | \ + ALX_CLK_GATE_DMAR | \ + ALX_CLK_GATE_DMAW) + +/* interop between drivers */ +#define ALX_DRV 0x1804 +#define ALX_DRV_PHY_AUTO BIT(28) +#define ALX_DRV_PHY_1000 BIT(27) +#define ALX_DRV_PHY_100 BIT(26) +#define ALX_DRV_PHY_10 BIT(25) +#define ALX_DRV_PHY_DUPLEX BIT(24) +/* bit23: adv Pause */ +#define ALX_DRV_PHY_PAUSE BIT(23) +/* bit22: adv Asym Pause */ +#define ALX_DRV_PHY_MASK 0xFF +#define ALX_DRV_PHY_SHIFT 21 +#define ALX_DRV_PHY_UNKNOWN 0 + +/* flag of phy inited */ +#define ALX_PHY_INITED 0x003F + +/* reg 1830 ~ 186C for C0+, 16 bit map patterns and wake packet detection */ +#define ALX_WOL_CTRL2 0x1830 +#define ALX_WOL_CTRL2_DATA_STORE BIT(3) +#define ALX_WOL_CTRL2_PTRN_EVT BIT(2) +#define ALX_WOL_CTRL2_PME_PTRN_EN BIT(1) +#define ALX_WOL_CTRL2_PTRN_EN BIT(0) + +#define ALX_WOL_CTRL3 0x1834 +#define ALX_WOL_CTRL3_PTRN_ADDR_MASK 0xFFFFF +#define ALX_WOL_CTRL3_PTRN_ADDR_SHIFT 0 + +#define ALX_WOL_CTRL4 0x1838 +#define ALX_WOL_CTRL4_PT15_MATCH BIT(31) +#define ALX_WOL_CTRL4_PT14_MATCH BIT(30) +#define ALX_WOL_CTRL4_PT13_MATCH BIT(29) +#define ALX_WOL_CTRL4_PT12_MATCH BIT(28) +#define ALX_WOL_CTRL4_PT11_MATCH BIT(27) +#define ALX_WOL_CTRL4_PT10_MATCH BIT(26) +#define ALX_WOL_CTRL4_PT9_MATCH BIT(25) +#define ALX_WOL_CTRL4_PT8_MATCH BIT(24) +#define ALX_WOL_CTRL4_PT7_MATCH BIT(23) +#define ALX_WOL_CTRL4_PT6_MATCH BIT(22) +#define ALX_WOL_CTRL4_PT5_MATCH BIT(21) +#define ALX_WOL_CTRL4_PT4_MATCH BIT(20) +#define ALX_WOL_CTRL4_PT3_MATCH BIT(19) +#define ALX_WOL_CTRL4_PT2_MATCH BIT(18) +#define ALX_WOL_CTRL4_PT1_MATCH BIT(17) +#define ALX_WOL_CTRL4_PT0_MATCH BIT(16) +#define ALX_WOL_CTRL4_PT15_EN BIT(15) +#define ALX_WOL_CTRL4_PT14_EN BIT(14) +#define ALX_WOL_CTRL4_PT13_EN BIT(13) +#define ALX_WOL_CTRL4_PT12_EN BIT(12) +#define ALX_WOL_CTRL4_PT11_EN BIT(11) +#define ALX_WOL_CTRL4_PT10_EN BIT(10) +#define ALX_WOL_CTRL4_PT9_EN BIT(9) +#define ALX_WOL_CTRL4_PT8_EN BIT(8) +#define ALX_WOL_CTRL4_PT7_EN BIT(7) +#define ALX_WOL_CTRL4_PT6_EN BIT(6) +#define ALX_WOL_CTRL4_PT5_EN BIT(5) +#define ALX_WOL_CTRL4_PT4_EN BIT(4) +#define ALX_WOL_CTRL4_PT3_EN BIT(3) +#define ALX_WOL_CTRL4_PT2_EN BIT(2) +#define ALX_WOL_CTRL4_PT1_EN BIT(1) +#define ALX_WOL_CTRL4_PT0_EN BIT(0) + +#define ALX_WOL_CTRL5 0x183C +#define ALX_WOL_CTRL5_PT3_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT3_LEN_SHIFT 24 +#define ALX_WOL_CTRL5_PT2_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT2_LEN_SHIFT 16 +#define ALX_WOL_CTRL5_PT1_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT1_LEN_SHIFT 8 +#define ALX_WOL_CTRL5_PT0_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT0_LEN_SHIFT 0 + +#define ALX_WOL_CTRL6 0x1840 +#define ALX_WOL_CTRL5_PT7_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT7_LEN_SHIFT 24 +#define ALX_WOL_CTRL5_PT6_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT6_LEN_SHIFT 16 +#define ALX_WOL_CTRL5_PT5_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT5_LEN_SHIFT 8 +#define ALX_WOL_CTRL5_PT4_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT4_LEN_SHIFT 0 + +#define ALX_WOL_CTRL7 0x1844 +#define ALX_WOL_CTRL5_PT11_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT11_LEN_SHIFT 24 +#define ALX_WOL_CTRL5_PT10_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT10_LEN_SHIFT 16 +#define ALX_WOL_CTRL5_PT9_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT9_LEN_SHIFT 8 +#define ALX_WOL_CTRL5_PT8_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT8_LEN_SHIFT 0 + +#define ALX_WOL_CTRL8 0x1848 +#define ALX_WOL_CTRL5_PT15_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT15_LEN_SHIFT 24 +#define ALX_WOL_CTRL5_PT14_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT14_LEN_SHIFT 16 +#define ALX_WOL_CTRL5_PT13_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT13_LEN_SHIFT 8 +#define ALX_WOL_CTRL5_PT12_LEN_MASK 0xFF +#define ALX_WOL_CTRL5_PT12_LEN_SHIFT 0 + +#define ALX_ACER_FIXED_PTN0 0x1850 +#define ALX_ACER_FIXED_PTN0_MASK 0xFFFFFFFF +#define ALX_ACER_FIXED_PTN0_SHIFT 0 + +#define ALX_ACER_FIXED_PTN1 0x1854 +#define ALX_ACER_FIXED_PTN1_MASK 0xFFFF +#define ALX_ACER_FIXED_PTN1_SHIFT 0 + +#define ALX_ACER_RANDOM_NUM0 0x1858 +#define ALX_ACER_RANDOM_NUM0_MASK 0xFFFFFFFF +#define ALX_ACER_RANDOM_NUM0_SHIFT 0 + +#define ALX_ACER_RANDOM_NUM1 0x185C +#define ALX_ACER_RANDOM_NUM1_MASK 0xFFFFFFFF +#define ALX_ACER_RANDOM_NUM1_SHIFT 0 + +#define ALX_ACER_RANDOM_NUM2 0x1860 +#define ALX_ACER_RANDOM_NUM2_MASK 0xFFFFFFFF +#define ALX_ACER_RANDOM_NUM2_SHIFT 0 + +#define ALX_ACER_RANDOM_NUM3 0x1864 +#define ALX_ACER_RANDOM_NUM3_MASK 0xFFFFFFFF +#define ALX_ACER_RANDOM_NUM3_SHIFT 0 + +#define ALX_ACER_MAGIC 0x1868 +#define ALX_ACER_MAGIC_EN BIT(31) +#define ALX_ACER_MAGIC_PME_EN BIT(30) +#define ALX_ACER_MAGIC_MATCH BIT(29) +#define ALX_ACER_MAGIC_FF_CHECK BIT(10) +#define ALX_ACER_MAGIC_RAN_LEN_MASK 0x1F +#define ALX_ACER_MAGIC_RAN_LEN_SHIFT 5 +#define ALX_ACER_MAGIC_FIX_LEN_MASK 0x1F +#define ALX_ACER_MAGIC_FIX_LEN_SHIFT 0 + +#define ALX_ACER_TIMER 0x186C +#define ALX_ACER_TIMER_EN BIT(31) +#define ALX_ACER_TIMER_PME_EN BIT(30) +#define ALX_ACER_TIMER_MATCH BIT(29) +#define ALX_ACER_TIMER_THRES_MASK 0x1FFFF +#define ALX_ACER_TIMER_THRES_SHIFT 0 +#define ALX_ACER_TIMER_THRES_DEF 1 + +/* RSS definitions */ +#define ALX_RSS_KEY0 0x14B0 +#define ALX_RSS_KEY1 0x14B4 +#define ALX_RSS_KEY2 0x14B8 +#define ALX_RSS_KEY3 0x14BC +#define ALX_RSS_KEY4 0x14C0 +#define ALX_RSS_KEY5 0x14C4 +#define ALX_RSS_KEY6 0x14C8 +#define ALX_RSS_KEY7 0x14CC +#define ALX_RSS_KEY8 0x14D0 +#define ALX_RSS_KEY9 0x14D4 + +#define ALX_RSS_IDT_TBL0 0x1B00 + +#define ALX_MSI_MAP_TBL1 0x15D0 +#define ALX_MSI_MAP_TBL1_TXQ1_SHIFT 20 +#define ALX_MSI_MAP_TBL1_TXQ0_SHIFT 16 +#define ALX_MSI_MAP_TBL1_RXQ3_SHIFT 12 +#define ALX_MSI_MAP_TBL1_RXQ2_SHIFT 8 +#define ALX_MSI_MAP_TBL1_RXQ1_SHIFT 4 +#define ALX_MSI_MAP_TBL1_RXQ0_SHIFT 0 + +#define ALX_MSI_MAP_TBL2 0x15D8 +#define ALX_MSI_MAP_TBL2_TXQ3_SHIFT 20 +#define ALX_MSI_MAP_TBL2_TXQ2_SHIFT 16 +#define ALX_MSI_MAP_TBL2_RXQ7_SHIFT 12 +#define ALX_MSI_MAP_TBL2_RXQ6_SHIFT 8 +#define ALX_MSI_MAP_TBL2_RXQ5_SHIFT 4 +#define ALX_MSI_MAP_TBL2_RXQ4_SHIFT 0 + +#define ALX_MSI_ID_MAP 0x15D4 + +#define ALX_MSI_RETRANS_TIMER 0x1920 +/* bit16: 1:line,0:standard */ +#define ALX_MSI_MASK_SEL_LINE BIT(16) +#define ALX_MSI_RETRANS_TM_MASK 0xFFFF +#define ALX_MSI_RETRANS_TM_SHIFT 0 + +/* CR DMA ctrl */ + +/* TX QoS */ +#define ALX_WRR 0x1938 +#define ALX_WRR_PRI_MASK 0x3 +#define ALX_WRR_PRI_SHIFT 29 +#define ALX_WRR_PRI_RESTRICT_NONE 3 +#define ALX_WRR_PRI3_MASK 0x1F +#define ALX_WRR_PRI3_SHIFT 24 +#define ALX_WRR_PRI2_MASK 0x1F +#define ALX_WRR_PRI2_SHIFT 16 +#define ALX_WRR_PRI1_MASK 0x1F +#define ALX_WRR_PRI1_SHIFT 8 +#define ALX_WRR_PRI0_MASK 0x1F +#define ALX_WRR_PRI0_SHIFT 0 + +#define ALX_HQTPD 0x193C +#define ALX_HQTPD_BURST_EN BIT(31) +#define ALX_HQTPD_Q3_NUMPREF_MASK 0xF +#define ALX_HQTPD_Q3_NUMPREF_SHIFT 8 +#define ALX_HQTPD_Q2_NUMPREF_MASK 0xF +#define ALX_HQTPD_Q2_NUMPREF_SHIFT 4 +#define ALX_HQTPD_Q1_NUMPREF_MASK 0xF +#define ALX_HQTPD_Q1_NUMPREF_SHIFT 0 + +#define ALX_MISC 0x19C0 +#define ALX_MISC_PSW_OCP_MASK 0x7 +#define ALX_MISC_PSW_OCP_SHIFT 21 +#define ALX_MISC_PSW_OCP_DEF 0x7 +#define ALX_MISC_ISO_EN BIT(12) +#define ALX_MISC_INTNLOSC_OPEN BIT(3) + +#define ALX_MSIC2 0x19C8 +#define ALX_MSIC2_CALB_START BIT(0) + +#define ALX_MISC3 0x19CC +/* bit1: 1:Software control 25M */ +#define ALX_MISC3_25M_BY_SW BIT(1) +/* bit0: 25M switch to intnl OSC */ +#define ALX_MISC3_25M_NOTO_INTNL BIT(0) + +/* MSIX tbl in memory space */ +#define ALX_MSIX_ENTRY_BASE 0x2000 + +/********************* PHY regs definition ***************************/ + +/* PHY Specific Status Register */ +#define ALX_MII_GIGA_PSSR 0x11 +#define ALX_GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 +#define ALX_GIGA_PSSR_DPLX 0x2000 +#define ALX_GIGA_PSSR_SPEED 0xC000 +#define ALX_GIGA_PSSR_10MBS 0x0000 +#define ALX_GIGA_PSSR_100MBS 0x4000 +#define ALX_GIGA_PSSR_1000MBS 0x8000 + +/* PHY Interrupt Enable Register */ +#define ALX_MII_IER 0x12 +#define ALX_IER_LINK_UP 0x0400 +#define ALX_IER_LINK_DOWN 0x0800 + +/* PHY Interrupt Status Register */ +#define ALX_MII_ISR 0x13 + +#define ALX_MII_DBG_ADDR 0x1D +#define ALX_MII_DBG_DATA 0x1E + +/***************************** debug port *************************************/ + +#define ALX_MIIDBG_ANACTRL 0x00 +#define ALX_ANACTRL_DEF 0x02EF + +#define ALX_MIIDBG_SYSMODCTRL 0x04 +/* en half bias */ +#define ALX_SYSMODCTRL_IECHOADJ_DEF 0xBB8B + +#define ALX_MIIDBG_SRDSYSMOD 0x05 +#define ALX_SRDSYSMOD_DEEMP_EN 0x0040 +#define ALX_SRDSYSMOD_DEF 0x2C46 + +#define ALX_MIIDBG_HIBNEG 0x0B +#define ALX_HIBNEG_PSHIB_EN 0x8000 +#define ALX_HIBNEG_HIB_PSE 0x1000 +#define ALX_HIBNEG_DEF 0xBC40 +#define ALX_HIBNEG_NOHIB (ALX_HIBNEG_DEF & \ + ~(ALX_HIBNEG_PSHIB_EN | ALX_HIBNEG_HIB_PSE)) + +#define ALX_MIIDBG_TST10BTCFG 0x12 +#define ALX_TST10BTCFG_DEF 0x4C04 + +#define ALX_MIIDBG_AZ_ANADECT 0x15 +#define ALX_AZ_ANADECT_DEF 0x3220 +#define ALX_AZ_ANADECT_LONG 0x3210 + +#define ALX_MIIDBG_MSE16DB 0x18 +#define ALX_MSE16DB_UP 0x05EA +#define ALX_MSE16DB_DOWN 0x02EA + +#define ALX_MIIDBG_MSE20DB 0x1C +#define ALX_MSE20DB_TH_MASK 0x7F +#define ALX_MSE20DB_TH_SHIFT 2 +#define ALX_MSE20DB_TH_DEF 0x2E +#define ALX_MSE20DB_TH_HI 0x54 + +#define ALX_MIIDBG_AGC 0x23 +#define ALX_AGC_2_VGA_MASK 0x3FU +#define ALX_AGC_2_VGA_SHIFT 8 +#define ALX_AGC_LONG1G_LIMT 40 +#define ALX_AGC_LONG100M_LIMT 44 + +#define ALX_MIIDBG_LEGCYPS 0x29 +#define ALX_LEGCYPS_EN 0x8000 +#define ALX_LEGCYPS_DEF 0x129D + +#define ALX_MIIDBG_TST100BTCFG 0x36 +#define ALX_TST100BTCFG_DEF 0xE12C + +#define ALX_MIIDBG_GREENCFG 0x3B +#define ALX_GREENCFG_DEF 0x7078 + +#define ALX_MIIDBG_GREENCFG2 0x3D +#define ALX_GREENCFG2_BP_GREEN 0x8000 +#define ALX_GREENCFG2_GATE_DFSE_EN 0x0080 + +/******* dev 3 *********/ +#define ALX_MIIEXT_PCS 3 + +#define ALX_MIIEXT_CLDCTRL3 0x8003 +#define ALX_CLDCTRL3_BP_CABLE1TH_DET_GT 0x8000 + +#define ALX_MIIEXT_CLDCTRL5 0x8005 +#define ALX_CLDCTRL5_BP_VD_HLFBIAS 0x4000 + +#define ALX_MIIEXT_CLDCTRL6 0x8006 +#define ALX_CLDCTRL6_CAB_LEN_MASK 0xFF +#define ALX_CLDCTRL6_CAB_LEN_SHIFT 0 +#define ALX_CLDCTRL6_CAB_LEN_SHORT1G 116 +#define ALX_CLDCTRL6_CAB_LEN_SHORT100M 152 + +#define ALX_MIIEXT_VDRVBIAS 0x8062 +#define ALX_VDRVBIAS_DEF 0x3 + +/********* dev 7 **********/ +#define ALX_MIIEXT_ANEG 7 + +#define ALX_MIIEXT_LOCAL_EEEADV 0x3C +#define ALX_LOCAL_EEEADV_1000BT 0x0004 +#define ALX_LOCAL_EEEADV_100BT 0x0002 + +#define ALX_MIIEXT_AFE 0x801A +#define ALX_AFE_10BT_100M_TH 0x0040 + +#define ALX_MIIEXT_S3DIG10 0x8023 +/* bit0: 1:bypass 10BT rx fifo, 0:original 10BT rx */ +#define ALX_MIIEXT_S3DIG10_SL 0x0001 +#define ALX_MIIEXT_S3DIG10_DEF 0 + +#define ALX_MIIEXT_NLP78 0x8027 +#define ALX_MIIEXT_NLP78_120M_DEF 0x8A05 + +#endif -- cgit v1.2.3 From ab8e99d276d4b72d1532bda4423b14c9e2ce053c Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Mon, 17 Jun 2013 19:31:52 +0200 Subject: net: cpsw: check for cpts pointer after its allocation after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 21a5b291b4b3..2fd69db3c09f 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1679,7 +1679,7 @@ static int cpsw_probe(struct platform_device *pdev) priv->rx_packet_max = max(rx_packet_max, 128); priv->cpts = devm_kzalloc(&pdev->dev, sizeof(struct cpts), GFP_KERNEL); priv->irq_enabled = true; - if (!ndev) { + if (!priv->cpts) { pr_err("error allocating cpts\n"); goto clean_ndev_ret; } -- cgit v1.2.3 From 4afe2156eb639e563d6ef0c2706b66ea400348b2 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 18 Jun 2013 14:33:58 +0200 Subject: can: usb_8dev: unregister netdev before free()ing The usb_8dev hardware has problems on some xhci USB hosts. The driver fails to read the firmware revision in the probe function. This leads to the following Oops: [ 3356.635912] kernel BUG at net/core/dev.c:5701! The driver tries to free the netdev, which has already been registered, without unregistering it. This patch fixes the problem by unregistering the netdev in the error path. Reported-by: Michael Olbrich Reviewed-by: Bernd Krumboeck Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/usb_8dev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index 6e15ef08f301..cbd388eea682 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -977,7 +977,7 @@ static int usb_8dev_probe(struct usb_interface *intf, err = usb_8dev_cmd_version(priv, &version); if (err) { netdev_err(netdev, "can't get firmware version\n"); - goto cleanup_cmd_msg_buffer; + goto cleanup_unregister_candev; } else { netdev_info(netdev, "firmware: %d.%d, hardware: %d.%d\n", @@ -989,6 +989,9 @@ static int usb_8dev_probe(struct usb_interface *intf, return 0; +cleanup_unregister_candev: + unregister_netdev(priv->netdev); + cleanup_cmd_msg_buffer: kfree(priv->cmd_msg_buffer); -- cgit v1.2.3 From eb064c3b49931dc73bba59887019c7f5cb97d322 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Tue, 18 Jun 2013 14:27:01 -0700 Subject: vxlan: fix check for migration of static entry The check introduced by: commit 26a41ae604381c5cc0caf1c3261ca6b298b5fe69 Author: stephen hemminger Date: Mon Jun 17 12:09:58 2013 -0700 vxlan: only migrate dynamic FDB entries was not correct because it is checking flag about type of FDB entry, rather than the state (dynamic versus static). The confusion arises because vxlan is reusing values from bridge, and bridge is reusing values from neighbour table, and easy to get lost in translation. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index dda997a0102c..57325f356d4f 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -579,7 +579,7 @@ static bool vxlan_snoop(struct net_device *dev, return false; /* Don't migrate static entries, drop packets */ - if (!(f->flags & NTF_SELF)) + if (f->state & NUD_NOARP) return true; if (net_ratelimit()) -- cgit v1.2.3