From af4ad9bca0c4039355b20d760b4fd39afa48c59d Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 29 Jan 2009 17:59:37 +0000 Subject: sfc: SFX7101/SFT9001: Fix AN advertisements All 10Xpress PHYs require autonegotiation all the time; enforce this in the set_settings() method and do not treat it as a workaround. Remove claimed support for 100M HD mode since it is not supported by current firmware. Do not set speed override bits when AN is enabled, and do not use register 1.49192 for AN configuration as it can override what we set elsewhere. Always set the AN selector bits to 1 (802.3). Fix confusion between Next Page and Extended Next Page. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/ethtool.c | 3 - drivers/net/sfc/mdio_10g.c | 177 +++++++++++++++++++----------------------- drivers/net/sfc/mdio_10g.h | 3 +- drivers/net/sfc/net_driver.h | 4 +- drivers/net/sfc/tenxpress.c | 151 ++++++++++++++--------------------- drivers/net/sfc/workarounds.h | 4 - 6 files changed, 141 insertions(+), 201 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 53d259e90187..7b5924c039b3 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg) - return -EINVAL; - /* Falcon GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 16bc5853d0ea..f9e2f95c3b48 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -266,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } -static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr) { int phy_id = efx->mii.phy_id; u32 result = 0; @@ -281,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; - if (reg & LPA_RESV) - result |= xnp; - return result; } @@ -313,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx, */ void mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, - u32 xnp, u32 xnp_lpa) + u32 npage_adv, u32 npage_lpa) { int phy_id = efx->mii.phy_id; int reg; @@ -364,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | - mdio_clause45_get_an(efx, - MDIO_AN_ADVERTISE, xnp); + mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) | + npage_adv; } else ecmd->autoneg = AUTONEG_DISABLE; } else @@ -374,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, if (ecmd->autoneg) { /* If AN is complete, report best common mode, * otherwise report best advertised mode. */ - u32 common = ecmd->advertising; + u32 modes = 0; if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & - (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { - common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, - xnp_lpa); - } - if (common & ADVERTISED_10000baseT_Full) { + (1 << MDIO_AN_STATUS_AN_DONE_LBN)) + modes = (ecmd->advertising & + (mdio_clause45_get_an(efx, MDIO_AN_LPA) | + npage_lpa)); + if (modes == 0) + modes = ecmd->advertising; + + if (modes & ADVERTISED_10000baseT_Full) { ecmd->speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; - } else if (common & (ADVERTISED_1000baseT_Full | - ADVERTISED_1000baseT_Half)) { + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { ecmd->speed = SPEED_1000; - ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); - } else if (common & (ADVERTISED_100baseT_Full | - ADVERTISED_100baseT_Half)) { + ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { ecmd->speed = SPEED_100; - ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { ecmd->speed = SPEED_10; - ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ @@ -418,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx, int phy_id = efx->mii.phy_id; struct ethtool_cmd prev; u32 required; - int ctrl1_bits, reg; + int reg; efx->phy_op->get_settings(efx, &prev); @@ -433,102 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx, if (prev.port != PORT_TP || ecmd->port != PORT_TP) return -EINVAL; - /* Check that PHY supports these settings and work out the - * basic control bits */ - if (ecmd->duplex) { + /* Check that PHY supports these settings */ + if (ecmd->autoneg) { + required = SUPPORTED_Autoneg; + } else if (ecmd->duplex) { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = BMCR_FULLDPLX; - required = SUPPORTED_10baseT_Full; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; - required = SUPPORTED_100baseT_Full; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; - required = SUPPORTED_1000baseT_Full; - break; - case SPEED_10000: - ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | - BMCR_FULLDPLX); - required = SUPPORTED_10000baseT_Full; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Full; break; + case SPEED_100: required = SUPPORTED_100baseT_Full; break; + default: return -EINVAL; } } else { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = 0; - required = SUPPORTED_10baseT_Half; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100; - required = SUPPORTED_100baseT_Half; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000; - required = SUPPORTED_1000baseT_Half; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Half; break; + case SPEED_100: required = SUPPORTED_100baseT_Half; break; + default: return -EINVAL; } } - if (ecmd->autoneg) - required |= SUPPORTED_Autoneg; required |= ecmd->advertising; if (required & ~prev.supported) return -EINVAL; - /* Set the basic control bits */ - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - MDIO_MMDREG_CTRL1); - reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); - reg |= ctrl1_bits; - mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, - reg); - - /* Set the AN registers */ - if (ecmd->autoneg != prev.autoneg || - ecmd->advertising != prev.advertising) { - bool xnp = false; - - if (efx->phy_op->set_xnp_advertise) - xnp = efx->phy_op->set_xnp_advertise(efx, - ecmd->advertising); - - if (ecmd->autoneg) { - reg = 0; - if (ecmd->advertising & ADVERTISED_10baseT_Half) - reg |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - reg |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - reg |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - reg |= ADVERTISE_100FULL; - if (xnp) - reg |= ADVERTISE_RESV; - mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_ADVERTISE, reg); - } + if (ecmd->autoneg) { + bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full + || EFX_WORKAROUND_13204(efx)); + + /* Set up the base page */ + reg = ADVERTISE_CSMA; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + else if (ecmd->advertising & (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + reg |= ADVERTISE_NPAGE; + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Set up the (extended) next page if necessary */ + if (efx->phy_op->set_npage_adv) + efx->phy_op->set_npage_adv(efx, ecmd->advertising); + /* Enable and restart AN */ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1); - if (ecmd->autoneg) - reg |= BMCR_ANENABLE | BMCR_ANRESTART; - else - reg &= ~BMCR_ANENABLE; - if (EFX_WORKAROUND_15195(efx) - && LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) - reg &= ~BMCR_ANRESTART; + reg |= BMCR_ANENABLE; + if (!(EFX_WORKAROUND_15195(efx) && + LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)) + reg |= BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1, reg); + } else { + /* Disable AN */ + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, + __ffs(BMCR_ANENABLE), false); + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | + 0x003c); + if (ecmd->speed == SPEED_100) + reg |= BMCR_SPEED100; + if (ecmd->duplex) + reg |= BMCR_FULLDPLX; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1, reg); } return 0; diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 09bf801d0569..8ba49773ce7e 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -155,7 +155,8 @@ #define MDIO_AN_XNP 22 #define MDIO_AN_LPA_XNP 25 -#define MDIO_AN_10GBT_ADVERTISE 32 +#define MDIO_AN_10GBT_CTRL 32 +#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5f255f75754e..8eb411a1c82e 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -566,7 +566,7 @@ struct efx_mac_operations { * @poll: Poll for hardware state. Serialised by the mac_lock. * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. - * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) * @num_tests: Number of PHY-specific tests/results * @test_names: Names of the tests/results @@ -586,7 +586,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); - bool (*set_xnp_advertise) (struct efx_nic *efx, u32); + void (*set_npage_adv) (struct efx_nic *efx, u32); u32 num_tests; const char *const *test_names; int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index c9584619322a..412d209d8313 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -179,11 +179,13 @@ #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 -#define C22EXT_MSTSLV_REG 49162 -#define C22EXT_MSTSLV_1000_HD_LBN 10 -#define C22EXT_MSTSLV_1000_HD_WIDTH 1 -#define C22EXT_MSTSLV_1000_FD_LBN 11 -#define C22EXT_MSTSLV_1000_FD_WIDTH 1 +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ @@ -741,114 +743,76 @@ reset: return rc; } -static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy = efx->mii.phy_id; - u32 lpa = 0; + int phy_id = efx->mii.phy_id; + u32 adv = 0, lpa = 0; int reg; if (efx->phy_type != PHY_TYPE_SFX7101) { - reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT, - C22EXT_MSTSLV_REG); - if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN)) + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL); + if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) + adv |= ADVERTISED_1000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_STATUS); + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) lpa |= ADVERTISED_1000baseT_Half; - if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN)) + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) lpa |= ADVERTISED_1000baseT_Full; } - reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN)) + adv |= ADVERTISED_10000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_STATUS); if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) lpa |= ADVERTISED_10000baseT_Full; - return lpa; -} - -static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= SUPPORTED_10000baseT_Full; - ecmd->advertising |= ADVERTISED_10000baseT_Full; -} - -static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - int phy_id = efx->mii.phy_id; - u32 xnp_adv = 0; - int reg; - - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN))) - xnp_adv |= ADVERTISED_100baseT_Full; - if (reg & (1 << PMA_PMD_1000T_ADV_LBN)) - xnp_adv |= ADVERTISED_1000baseT_Full; - if (reg & (1 << PMA_PMD_10000T_ADV_LBN)) - xnp_adv |= ADVERTISED_10000baseT_Full; - - mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full); + mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa); - /* Use the vendor defined C22ext register for duplex settings */ - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG); - ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? - DUPLEX_FULL : DUPLEX_HALF); - } + if (efx->phy_type != PHY_TYPE_SFX7101) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); /* In loopback, the PHY automatically brings up the correct interface, * but doesn't advertise the correct speed. So override it */ if (efx->loopback_mode == LOOPBACK_GPHY) ecmd->speed = SPEED_1000; - else if (LOOPBACK_MASK(efx) & SFT9001_LOOPBACKS) + else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) ecmd->speed = SPEED_10000; } -static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy_id = efx->mii.phy_id; - int rc; - - rc = mdio_clause45_set_settings(efx, ecmd); - if (rc) - return rc; + if (!ecmd->autoneg) + return -EINVAL; - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) - mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN, - ecmd->duplex == DUPLEX_FULL); + return mdio_clause45_set_settings(efx, ecmd); +} - return rc; +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) +{ + mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } -static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising) +static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy = efx->mii.phy_id; - int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - bool enabled; - - reg &= ~((1 << 2) | (1 << 3)); - if (EFX_WORKAROUND_13204(efx) && - (advertising & ADVERTISED_100baseT_Full)) - reg |= 1 << PMA_PMD_100TX_ADV_LBN; - if (advertising & ADVERTISED_1000baseT_Full) - reg |= 1 << PMA_PMD_1000T_ADV_LBN; - if (advertising & ADVERTISED_10000baseT_Full) - reg |= 1 << PMA_PMD_10000T_ADV_LBN; - mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG, reg); - - enabled = (advertising & - (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full)); - if (EFX_WORKAROUND_13204(efx)) - enabled |= (advertising & ADVERTISED_100baseT_Full); - return enabled; + int phy_id = efx->mii.phy_id; + + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL, + C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, + advertising & ADVERTISED_1000baseT_Full); + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { @@ -858,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sfx7101_get_settings, - .set_settings = mdio_clause45_set_settings, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, .num_tests = ARRAY_SIZE(sfx7101_test_names), .test_names = sfx7101_test_names, .run_tests = sfx7101_run_tests, @@ -874,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sft9001_get_settings, - .set_settings = sft9001_set_settings, - .set_xnp_advertise = sft9001_set_xnp_advertise, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sft9001_set_npage_adv, .num_tests = ARRAY_SIZE(sft9001_test_names), .test_names = sft9001_test_names, .run_tests = sft9001_run_tests, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index b810dcdf4681..78de68f4a95b 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,7 +18,6 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) #define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ (efx)->phy_type == PHY_TYPE_SFT9001B) @@ -55,9 +54,6 @@ /* Need to send XNP pages for 100BaseT */ #define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 -/* Need to keep AN enabled */ -#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A - /* Don't restart AN in near-side loopback */ #define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 -- cgit v1.2.3