From b7327d89ae694a89f9934d428bde520b77b3131c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Jun 2013 15:44:03 +0300 Subject: iwlwifi: mvm: unregister leds when registration failed This was missing and prevented any further attempts to load the module. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index e08683b20531..cab2f0c61ec7 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -257,7 +257,11 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) if (ret) return ret; - return ieee80211_register_hw(mvm->hw); + ret = ieee80211_register_hw(mvm->hw); + if (ret) + iwl_mvm_leds_exit(mvm); + + return ret; } static void iwl_mvm_mac_tx(struct ieee80211_hw *hw, -- cgit v1.2.3 From 707aee401d2467baa785a697f40a6e2d9ee79ad5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 3 May 2013 18:58:16 +0200 Subject: iwlwifi: dvm: don't send BT_CONFIG on devices w/o Bluetooth The BT_CONFIG command that is sent to the device during startup will enable BT coex unless the module parameter turns it off, but on devices without Bluetooth this may cause problems, as reported in Redhat BZ 885407. Fix this by sending the BT_CONFIG command only when the device has Bluetooth. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 3952ddf2ddb2..1531a4fc0960 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -758,7 +758,7 @@ int iwl_alive_start(struct iwl_priv *priv) BT_COEX_PRIO_TBL_EVT_INIT_CALIB2); if (ret) return ret; - } else { + } else if (priv->lib->bt_params) { /* * default is 2-wire BT coexexistence support */ -- cgit v1.2.3 From 0ecb376375d662987eba2f6e3bfd4bd532bb3907 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sun, 23 Jun 2013 20:31:07 +0300 Subject: iwlwifi: mvm: Fix VIF specific debugfs directory creation Avoid creating VIF specific debugfs directory if already exist. This may happen when, for example, resetting hw, suspend-resume. Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/debugfs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/iwlwifi/mvm/debugfs.c index e56ed2a84888..c24a744910ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/mvm/debugfs.c @@ -988,7 +988,11 @@ void iwl_mvm_vif_dbgfs_register(struct iwl_mvm *mvm, struct ieee80211_vif *vif) struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); char buf[100]; - if (!dbgfs_dir) + /* + * Check if debugfs directory already exist before creating it. + * This may happen when, for example, resetting hw or suspend-resume + */ + if (!dbgfs_dir || mvmvif->dbgfs_dir) return; mvmvif->dbgfs_dir = debugfs_create_dir("iwlmvm", dbgfs_dir); -- cgit v1.2.3 From 93a426673fbfeae7fa6b27008828e2ac4c08dbee Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 2 Jul 2013 13:35:35 +0300 Subject: iwlwifi: mvm: fix L2P BA ressources leak We didn't release the Rx AMPDU ressources properly. This bug led to firmware assert after 16 BA sessions. Cc: [3.9+] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 62fe5209093b..b6ab0766ea99 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -621,8 +621,12 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); cmd.sta_id = mvm_sta->sta_id; cmd.add_modify = STA_MODE_MODIFY; - cmd.add_immediate_ba_tid = (u8) tid; - cmd.add_immediate_ba_ssn = cpu_to_le16(ssn); + if (start) { + cmd.add_immediate_ba_tid = (u8) tid; + cmd.add_immediate_ba_ssn = cpu_to_le16(ssn); + } else { + cmd.remove_immediate_ba_tid = (u8) tid; + } cmd.modify_mask = start ? STA_MODIFY_ADD_BA_TID : STA_MODIFY_REMOVE_BA_TID; -- cgit v1.2.3 From 113a04470d9178170a5d1aa165809515884f39a8 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 2 Jul 2013 14:16:38 +0300 Subject: iwlwifi: mvm: track the number of Rx BA sessions The firmware / HW can't support more than 16 Rx BA sessions. Deny any attemps to open more sessions than that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 1 + drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/iwlwifi/mvm/sta.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index cab2f0c61ec7..1a4a032cecb2 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -389,6 +389,7 @@ static void iwl_mvm_restart_cleanup(struct iwl_mvm *mvm) ieee80211_wake_queues(mvm->hw); mvm->vif_count = 0; + mvm->rx_ba_sessions = 0; } static int iwl_mvm_mac_start(struct ieee80211_hw *hw) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d40d7db185d6..420e82d379d9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -419,6 +419,7 @@ struct iwl_mvm { struct work_struct sta_drained_wk; unsigned long sta_drained[BITS_TO_LONGS(IWL_MVM_STATION_COUNT)]; atomic_t pending_frames[IWL_MVM_STATION_COUNT]; + u8 rx_ba_sessions; /* configured by mac80211 */ u32 rts_threshold; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index b6ab0766ea99..85d4bbe52157 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -608,6 +608,8 @@ int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *bsta) return ret; } +#define IWL_MAX_RX_BA_SESSIONS 16 + int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int tid, u16 ssn, bool start) { @@ -618,6 +620,11 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, lockdep_assert_held(&mvm->mutex); + if (start && mvm->rx_ba_sessions >= IWL_MAX_RX_BA_SESSIONS) { + IWL_WARN(mvm, "Not enough RX BA SESSIONS\n"); + return -ENOSPC; + } + cmd.mac_id_n_color = cpu_to_le32(mvm_sta->mac_id_n_color); cmd.sta_id = mvm_sta->sta_id; cmd.add_modify = STA_MODE_MODIFY; @@ -652,6 +659,14 @@ int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta, break; } + if (!ret) { + if (start) + mvm->rx_ba_sessions++; + else if (mvm->rx_ba_sessions > 0) + /* check that restart flow didn't zero the counter */ + mvm->rx_ba_sessions--; + } + return ret; } -- cgit v1.2.3 From 48bc13072109ea58465542aa1ee31b4e1065468a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Jul 2013 15:55:29 +0200 Subject: iwlwifi: mvm: refuse connection to APs with BI < 16 Due to a firmware bug, it crashes when the beacon interval is smaller than 16. Avoid this by refusing the station state change creating the AP station, causing mac80211 to abandon the attempt to connect to the AP, and eventually wpa_s to blacklist it. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 1a4a032cecb2..1eedc424051c 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1011,6 +1011,21 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, mutex_lock(&mvm->mutex); if (old_state == IEEE80211_STA_NOTEXIST && new_state == IEEE80211_STA_NONE) { + /* + * Firmware bug - it'll crash if the beacon interval is less + * than 16. We can't avoid connecting at all, so refuse the + * station state change, this will cause mac80211 to abandon + * attempts to connect to this AP, and eventually wpa_s will + * blacklist the AP... + */ + if (vif->type == NL80211_IFTYPE_STATION && + vif->bss_conf.beacon_int < 16) { + IWL_ERR(mvm, + "AP %pM beacon interval is %d, refusing due to firmware bug!\n", + sta->addr, vif->bss_conf.beacon_int); + ret = -EINVAL; + goto out_unlock; + } ret = iwl_mvm_add_sta(mvm, vif, sta); } else if (old_state == IEEE80211_STA_NONE && new_state == IEEE80211_STA_AUTH) { @@ -1043,6 +1058,7 @@ static int iwl_mvm_mac_sta_state(struct ieee80211_hw *hw, } else { ret = -EIO; } + out_unlock: mutex_unlock(&mvm->mutex); return ret; -- cgit v1.2.3 From fe04e83706037802c502ea41c0d1799ec35fc0d7 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Thu, 4 Jul 2013 15:17:48 +0300 Subject: iwlwifi: mvm: fix bug in scan ssid Increment index in each iteration. Without this increment we are overriding the added SSIDs and we will send only the last SSId and (n_ssids - 1) broadcast probes. Cc: [3.9+] Signed-off-by: David Spinadel Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 2157b0f8ced5..8023deec20cb 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -137,8 +137,8 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, { int fw_idx, req_idx; - fw_idx = 0; - for (req_idx = req->n_ssids - 1; req_idx > 0; req_idx--) { + for (req_idx = req->n_ssids - 1, fw_idx = 0; req_idx > 0; + req_idx--, fw_idx++) { cmd->direct_scan[fw_idx].id = WLAN_EID_SSID; cmd->direct_scan[fw_idx].len = req->ssids[req_idx].ssid_len; memcpy(cmd->direct_scan[fw_idx].ssid, -- cgit v1.2.3 From a590ad411891de551e6de1b51ea635c0484148d6 Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Thu, 4 Jul 2013 15:22:26 +0300 Subject: iwlwifi: mvm: remove extra SSID from probe request Bits 1-21 in this channel type attributes are indication for which SSID is going to be sent on this channel. Since the first SSID is sent implicitly in the probe request, we don't need to toggle its bit here. Signed-off-by: David Spinadel Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/scan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 8023deec20cb..268f027b45b0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -153,7 +153,9 @@ static void iwl_mvm_scan_fill_ssids(struct iwl_scan_cmd *cmd, * just to notify that this scan is active and not passive. * In order to notify the FW of the number of SSIDs we wish to scan (including * the zero-length one), we need to set the corresponding bits in chan->type, - * one for each SSID, and set the active bit (first). + * one for each SSID, and set the active bit (first). The first SSID is already + * included in the probe template, so we need to set only req->n_ssids - 1 bits + * in addition to the first bit. */ static u16 iwl_mvm_get_active_dwell(enum ieee80211_band band, int n_ssids) { @@ -179,7 +181,7 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, __le32 chan_type_value; if (req->n_ssids > 0) - chan_type_value = cpu_to_le32(BIT(req->n_ssids + 1) - 1); + chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1); else chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; -- cgit v1.2.3 From bcfb879432094c267c35a7ff75d953d3a66c193a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 28 Jun 2013 09:12:53 -0500 Subject: rtlwifi: Initialize power-setting callback for USB devices Commit a269913c5 entitled "rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue" has two bugs for USB drivers. Firstly, the work queue in question was not initialized. Secondly, the callback routine used by this queue is contained within the file used for PCI devices. As a result, it is not available for architectures without PCI hardware. Signed-off-by: Larry Finger Reported-by: Richard Genoud Tested-by: Richard Genoud Cc: Richard Genoud Cc: Stable [3.10] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 13 ------------- drivers/net/wireless/rtlwifi/ps.c | 12 ++++++++++++ drivers/net/wireless/rtlwifi/ps.h | 1 + drivers/net/wireless/rtlwifi/usb.c | 2 ++ 4 files changed, 15 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index c97e9d327331..e70b4ffaf97f 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1008,19 +1008,6 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) return; } -static void rtl_lps_change_work_callback(struct work_struct *work) -{ - struct rtl_works *rtlworks = - container_of(work, struct rtl_works, lps_change_work); - struct ieee80211_hw *hw = rtlworks->hw; - struct rtl_priv *rtlpriv = rtl_priv(hw); - - if (rtlpriv->enter_ps) - rtl_lps_enter(hw); - else - rtl_lps_leave(hw); -} - static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw) { struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index 884bceae38a9..71e917db8338 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -611,6 +611,18 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw) MSECS(sleep_intv * mac->vif->bss_conf.beacon_int - 40)); } +void rtl_lps_change_work_callback(struct work_struct *work) +{ + struct rtl_works *rtlworks = + container_of(work, struct rtl_works, lps_change_work); + struct ieee80211_hw *hw = rtlworks->hw; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->enter_ps) + rtl_lps_enter(hw); + else + rtl_lps_leave(hw); +} void rtl_swlps_wq_callback(void *data) { diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h index 4d682b753f50..88bd76ea88f7 100644 --- a/drivers/net/wireless/rtlwifi/ps.h +++ b/drivers/net/wireless/rtlwifi/ps.h @@ -49,5 +49,6 @@ void rtl_swlps_rf_awake(struct ieee80211_hw *hw); void rtl_swlps_rf_sleep(struct ieee80211_hw *hw); void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state); void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len); +void rtl_lps_change_work_callback(struct work_struct *work); #endif diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index a3532e077871..1feebdc92f41 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -1070,6 +1070,8 @@ int rtl_usb_probe(struct usb_interface *intf, spin_lock_init(&rtlpriv->locks.usb_lock); INIT_WORK(&rtlpriv->works.fill_h2c_cmd, rtl_fill_h2c_cmd_work_callback); + INIT_WORK(&rtlpriv->works.lps_change_work, + rtl_lps_change_work_callback); rtlpriv->usb_data_index = 0; init_completion(&rtlpriv->firmware_loading_complete); -- cgit v1.2.3 From a4943ccbc316fd74d3612d7a5984a91ab7e5dc8c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 30 Jun 2013 12:02:13 +0200 Subject: ath9k: fix tx pending frames accounting for dropped packets When dropping packets that have gone far enough into the tx path, the pending frame counter needs to be decreased. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 44 ++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 16 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index c59ae43b9b35..927992732620 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -146,6 +146,28 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } +static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq, + struct sk_buff *skb) +{ + int q; + + q = skb_get_queue_mapping(skb); + if (txq == sc->tx.uapsdq) + txq = sc->tx.txq_map[q]; + + if (txq != sc->tx.txq_map[q]) + return; + + if (WARN_ON(--txq->pending_frames < 0)) + txq->pending_frames = 0; + + if (txq->stopped && + txq->pending_frames < sc->tx.txq_max_pending[q]) { + ieee80211_wake_queue(sc->hw, q); + txq->stopped = false; + } +} + static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = tid->ac->txq; @@ -167,6 +189,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) if (!bf) { bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { + ath_txq_skb_done(sc, txq, skb); ieee80211_free_txskb(sc->hw, skb); continue; } @@ -811,6 +834,7 @@ ath_tx_get_tid_subframe(struct ath_softc *sc, struct ath_txq *txq, if (!bf) { __skb_unlink(skb, &tid->buf_q); + ath_txq_skb_done(sc, txq, skb); ieee80211_free_txskb(sc->hw, skb); continue; } @@ -1824,6 +1848,7 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_txq *txq, bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { + ath_txq_skb_done(sc, txq, skb); ieee80211_free_txskb(sc->hw, skb); return; } @@ -2090,6 +2115,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { + ath_txq_skb_done(sc, txq, skb); if (txctl->paprd) dev_kfree_skb_any(skb); else @@ -2189,7 +2215,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data; - int q, padpos, padsize; + int padpos, padsize; unsigned long flags; ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb); @@ -2225,21 +2251,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, spin_unlock_irqrestore(&sc->sc_pm_lock, flags); __skb_queue_tail(&txq->complete_q, skb); - - q = skb_get_queue_mapping(skb); - if (txq == sc->tx.uapsdq) - txq = sc->tx.txq_map[q]; - - if (txq == sc->tx.txq_map[q]) { - if (WARN_ON(--txq->pending_frames < 0)) - txq->pending_frames = 0; - - if (txq->stopped && - txq->pending_frames < sc->tx.txq_max_pending[q]) { - ieee80211_wake_queue(sc->hw, q); - txq->stopped = false; - } - } + ath_txq_skb_done(sc, txq, skb); } static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf, -- cgit v1.2.3 From 9494849e53e74048ee14d512feade01db402eef7 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Tue, 2 Jul 2013 00:43:42 +0400 Subject: ath9k_htc: fix data race between request_firmware_nowait() callback and suspend() ath9k_hif_usb_probe() requests firmware asynchronically and there is some initialization postponed till firmware is ready. In particular, ath9k_hif_usb_firmware_cb() callback initializes hif_dev->tx.tx_buf and hif_dev->tx.tx_pending lists. At the same time, ath9k_hif_usb_suspend() iterates that lists through ath9k_hif_usb_dealloc_urbs(). If suspend happens before request_firmware_nowait() callback is called, it can lead to oops. Similar issue could be in ath9k_hif_usb_disconnect(), but it is prevented using hif_dev->fw_done completion and HIF_USB_READY flag. The patch extends this approach to suspend() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 9e582e14da74..2469db5a5bb1 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1082,7 +1082,7 @@ static void ath9k_hif_usb_firmware_fail(struct hif_device_usb *hif_dev) struct device *dev = &hif_dev->udev->dev; struct device *parent = dev->parent; - complete(&hif_dev->fw_done); + complete_all(&hif_dev->fw_done); if (parent) device_lock(parent); @@ -1131,7 +1131,7 @@ static void ath9k_hif_usb_firmware_cb(const struct firmware *fw, void *context) release_firmware(fw); hif_dev->flags |= HIF_USB_READY; - complete(&hif_dev->fw_done); + complete_all(&hif_dev->fw_done); return; @@ -1316,7 +1316,10 @@ static int ath9k_hif_usb_suspend(struct usb_interface *interface, if (!(hif_dev->flags & HIF_USB_START)) ath9k_htc_suspend(hif_dev->htc_handle); - ath9k_hif_usb_dealloc_urbs(hif_dev); + wait_for_completion(&hif_dev->fw_done); + + if (hif_dev->flags & HIF_USB_READY) + ath9k_hif_usb_dealloc_urbs(hif_dev); return 0; } -- cgit v1.2.3 From 6a08483926bf26d9e5274b4dd5086d583971f1ea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jul 2013 23:03:35 +0200 Subject: rt2x00: RT2X00 should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `rt2x00queue_unmap_skb': drivers/net/wireless/rt2x00/rt2x00queue.c:129: undefined reference to `dma_unmap_single' drivers/net/wireless/rt2x00/rt2x00queue.c:133: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `rt2x00queue_map_txskb': drivers/net/wireless/rt2x00/rt2x00queue.c:112: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:115: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `rt2x00queue_alloc_rxskb': drivers/net/wireless/rt2x00/rt2x00queue.c:93: undefined reference to `dma_map_single' drivers/net/wireless/rt2x00/rt2x00queue.c:95: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven Cc: linux-wireless@vger.kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 9b915d3a44be..3e60a31582f8 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -1,6 +1,6 @@ menuconfig RT2X00 tristate "Ralink driver support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA ---help--- This will enable the support for the Ralink drivers, developed in the rt2x00 project . -- cgit v1.2.3 From f287cbd01f2e8e1b325b96233c373619c2d25ee2 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 11 Jul 2013 09:19:13 -0400 Subject: ath5k: fix extra set bit in multicast mask Bit 32 was always set which looks to have been accidental, according to git history. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 81b686c6a376..40825d43322e 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -325,7 +325,7 @@ ath5k_prepare_multicast(struct ieee80211_hw *hw, struct netdev_hw_addr *ha; mfilt[0] = 0; - mfilt[1] = 1; + mfilt[1] = 0; netdev_hw_addr_list_for_each(ha, mc_list) { /* calculate XOR of eight 6-bit values */ -- cgit v1.2.3 From 6f334c2b3966f10cbd089bb124ec0e114d8d8c77 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 12 Jul 2013 15:32:15 -0500 Subject: rtlwifi: Fix build errors for unusual cases The present build configuration for the rtlwifi family of drivers will fail under two known conditions: (1) If rtlwifi is selected without selecting any of the dependent drivers, there are errors in the build. (2) If the PCI drivers are built into the kernel and the USB drivers are modules, or vice versa, there are missing globals. The first condition is fixed by never building rtlwifi unless at least one of the device drivers is selected. The second failure is fixed by splitting the PCI and USB codes out of rtlwifi, and creating their own mini drivers. If the drivers that use them are modules, they will also be modules. Although a number of files are touched by this patch, only Makefile and Kconfig have undergone significant changes. The only modifications to the other files were to export entry points needed by the new rtl_pci and rtl_usb units, or to rename two variables that had names that were likely to cause namespace collisions. Reported-by: Fengguang Wu [Condition 1] Reported-by: Ben Hutchings [Condition 2] Signed-off-by: Larry Finger Cc: Ben Hutchings Cc: Fengguang Wu Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/Kconfig | 72 +++++++++++++++++++++++------------ drivers/net/wireless/rtlwifi/Makefile | 10 ++--- drivers/net/wireless/rtlwifi/base.c | 19 +++++++-- drivers/net/wireless/rtlwifi/base.h | 2 +- drivers/net/wireless/rtlwifi/core.c | 1 + drivers/net/wireless/rtlwifi/debug.c | 1 + drivers/net/wireless/rtlwifi/efuse.c | 1 + drivers/net/wireless/rtlwifi/pci.c | 9 ++++- drivers/net/wireless/rtlwifi/ps.c | 4 ++ drivers/net/wireless/rtlwifi/usb.c | 7 ++++ 10 files changed, 91 insertions(+), 35 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index 7253de3d8c66..c2ffce7a907c 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -1,27 +1,20 @@ -config RTLWIFI - tristate "Realtek wireless card support" - depends on MAC80211 - select FW_LOADER - ---help--- - This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE - drivers. This module does nothing by itself - the various front-end - drivers need to be enabled to support any desired devices. - - If you choose to build as a module, it'll be called rtlwifi. - -config RTLWIFI_DEBUG - bool "Debugging output for rtlwifi driver family" - depends on RTLWIFI +menuconfig RTL_CARDS + tristate "Realtek rtlwifi family of devices" + depends on MAC80211 && (PCI || USB) default y ---help--- - To use the module option that sets the dynamic-debugging level for, - the front-end driver, this parameter must be "Y". For memory-limited - systems, choose "N". If in doubt, choose "Y". + This option will enable support for the Realtek mac80211-based + wireless drivers. Drivers rtl8192ce, rtl8192cu, rtl8192se, rtl8192de, + rtl8723eu, and rtl8188eu share some common code. + +if RTL_CARDS config RTL8192CE tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter" - depends on RTLWIFI && PCI + depends on PCI select RTL8192C_COMMON + select RTLWIFI + select RTLWIFI_PCI ---help--- This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe wireless network adapters. @@ -30,7 +23,9 @@ config RTL8192CE config RTL8192SE tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter" - depends on RTLWIFI && PCI + depends on PCI + select RTLWIFI + select RTLWIFI_PCI ---help--- This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe wireless network adapters. @@ -39,7 +34,9 @@ config RTL8192SE config RTL8192DE tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter" - depends on RTLWIFI && PCI + depends on PCI + select RTLWIFI + select RTLWIFI_PCI ---help--- This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe wireless network adapters. @@ -48,7 +45,9 @@ config RTL8192DE config RTL8723AE tristate "Realtek RTL8723AE PCIe Wireless Network Adapter" - depends on RTLWIFI && PCI + depends on PCI + select RTLWIFI + select RTLWIFI_PCI ---help--- This is the driver for Realtek RTL8723AE 802.11n PCIe wireless network adapters. @@ -57,7 +56,9 @@ config RTL8723AE config RTL8188EE tristate "Realtek RTL8188EE Wireless Network Adapter" - depends on RTLWIFI && PCI + depends on PCI + select RTLWIFI + select RTLWIFI_PCI ---help--- This is the driver for Realtek RTL8188EE 802.11n PCIe wireless network adapters. @@ -66,7 +67,9 @@ config RTL8188EE config RTL8192CU tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter" - depends on RTLWIFI && USB + depends on USB + select RTLWIFI + select RTLWIFI_USB select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB @@ -74,7 +77,28 @@ config RTL8192CU If you choose to build it as a module, it will be called rtl8192cu +config RTLWIFI + tristate + select FW_LOADER + +config RTLWIFI_PCI + tristate + +config RTLWIFI_USB + tristate + +config RTLWIFI_DEBUG + bool "Debugging output for rtlwifi driver family" + depends on RTLWIFI + default y + ---help--- + To use the module option that sets the dynamic-debugging level for, + the front-end driver, this parameter must be "Y". For memory-limited + systems, choose "N". If in doubt, choose "Y". + config RTL8192C_COMMON tristate depends on RTL8192CE || RTL8192CU - default m + default y + +endif diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile index ff02b874f8d8..d56f023a4b90 100644 --- a/drivers/net/wireless/rtlwifi/Makefile +++ b/drivers/net/wireless/rtlwifi/Makefile @@ -12,13 +12,11 @@ rtlwifi-objs := \ rtl8192c_common-objs += \ -ifneq ($(CONFIG_PCI),) -rtlwifi-objs += pci.o -endif +obj-$(CONFIG_RTLWIFI_PCI) += rtl_pci.o +rtl_pci-objs := pci.o -ifneq ($(CONFIG_USB),) -rtlwifi-objs += usb.o -endif +obj-$(CONFIG_RTLWIFI_USB) += rtl_usb.o +rtl_usb-objs := usb.o obj-$(CONFIG_RTL8192C_COMMON) += rtl8192c/ obj-$(CONFIG_RTL8192CE) += rtl8192ce/ diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 9d558ac77b0c..7651f5acc14b 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -172,6 +172,7 @@ u8 rtl_tid_to_ac(u8 tid) { return tid_to_ac[tid]; } +EXPORT_SYMBOL_GPL(rtl_tid_to_ac); static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw, struct ieee80211_sta_ht_cap *ht_cap) @@ -406,6 +407,7 @@ void rtl_deinit_deferred_work(struct ieee80211_hw *hw) cancel_delayed_work(&rtlpriv->works.ps_rfon_wq); cancel_delayed_work(&rtlpriv->works.fwevt_wq); } +EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work); void rtl_init_rfkill(struct ieee80211_hw *hw) { @@ -439,6 +441,7 @@ void rtl_deinit_rfkill(struct ieee80211_hw *hw) { wiphy_rfkill_stop_polling(hw->wiphy); } +EXPORT_SYMBOL_GPL(rtl_deinit_rfkill); int rtl_init_core(struct ieee80211_hw *hw) { @@ -489,10 +492,12 @@ int rtl_init_core(struct ieee80211_hw *hw) return 0; } +EXPORT_SYMBOL_GPL(rtl_init_core); void rtl_deinit_core(struct ieee80211_hw *hw) { } +EXPORT_SYMBOL_GPL(rtl_deinit_core); void rtl_init_rx_config(struct ieee80211_hw *hw) { @@ -501,6 +506,7 @@ void rtl_init_rx_config(struct ieee80211_hw *hw) rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf)); } +EXPORT_SYMBOL_GPL(rtl_init_rx_config); /********************************************************* * @@ -879,6 +885,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb) return true; } +EXPORT_SYMBOL_GPL(rtl_tx_mgmt_proc); void rtl_get_tcb_desc(struct ieee80211_hw *hw, struct ieee80211_tx_info *info, @@ -1052,6 +1059,7 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) return true; } +EXPORT_SYMBOL_GPL(rtl_action_proc); /*should call before software enc*/ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) @@ -1125,6 +1133,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) return false; } +EXPORT_SYMBOL_GPL(rtl_is_special_data); /********************************************************* * @@ -1300,6 +1309,7 @@ void rtl_beacon_statistic(struct ieee80211_hw *hw, struct sk_buff *skb) rtlpriv->link_info.bcn_rx_inperiod++; } +EXPORT_SYMBOL_GPL(rtl_beacon_statistic); void rtl_watchdog_wq_callback(void *data) { @@ -1793,6 +1803,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len) mac->vendor = vendor; } +EXPORT_SYMBOL_GPL(rtl_recognize_peer); /********************************************************* * @@ -1849,6 +1860,7 @@ struct attribute_group rtl_attribute_group = { .name = "rtlsysfs", .attrs = rtl_sysfs_entries, }; +EXPORT_SYMBOL_GPL(rtl_attribute_group); MODULE_AUTHOR("lizhaoming "); MODULE_AUTHOR("Realtek WlanFAE "); @@ -1856,7 +1868,8 @@ MODULE_AUTHOR("Larry Finger "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core"); -struct rtl_global_var global_var = {}; +struct rtl_global_var rtl_global_var = {}; +EXPORT_SYMBOL_GPL(rtl_global_var); static int __init rtl_core_module_init(void) { @@ -1864,8 +1877,8 @@ static int __init rtl_core_module_init(void) pr_err("Unable to register rtl_rc, use default RC !!\n"); /* init some global vars */ - INIT_LIST_HEAD(&global_var.glb_priv_list); - spin_lock_init(&global_var.glb_list_lock); + INIT_LIST_HEAD(&rtl_global_var.glb_priv_list); + spin_lock_init(&rtl_global_var.glb_list_lock); return 0; } diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h index 8576bc34b032..0e5fe0902daf 100644 --- a/drivers/net/wireless/rtlwifi/base.h +++ b/drivers/net/wireless/rtlwifi/base.h @@ -147,7 +147,7 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len); u8 rtl_tid_to_ac(u8 tid); extern struct attribute_group rtl_attribute_group; void rtl_easy_concurrent_retrytimer_callback(unsigned long data); -extern struct rtl_global_var global_var; +extern struct rtl_global_var rtl_global_var; int rtlwifi_rate_mapping(struct ieee80211_hw *hw, bool isht, u8 desc_rate, bool first_ampdu); bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb); diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index ee84844be008..733b7ce7f0e2 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -1330,3 +1330,4 @@ const struct ieee80211_ops rtl_ops = { .rfkill_poll = rtl_op_rfkill_poll, .flush = rtl_op_flush, }; +EXPORT_SYMBOL_GPL(rtl_ops); diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c index 7d52d3d7769f..76e2086e137e 100644 --- a/drivers/net/wireless/rtlwifi/debug.c +++ b/drivers/net/wireless/rtlwifi/debug.c @@ -51,3 +51,4 @@ void rtl_dbgp_flag_init(struct ieee80211_hw *hw) /*Init Debug flag enable condition */ } +EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init); diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c index 9e3894178e77..838a1ed3f194 100644 --- a/drivers/net/wireless/rtlwifi/efuse.c +++ b/drivers/net/wireless/rtlwifi/efuse.c @@ -229,6 +229,7 @@ void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf) *pbuf = (u8) (value32 & 0xff); } +EXPORT_SYMBOL_GPL(read_efuse_byte); void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf) { diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index e70b4ffaf97f..703f839af6ca 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -35,6 +35,13 @@ #include "efuse.h" #include #include +#include + +MODULE_AUTHOR("lizhaoming "); +MODULE_AUTHOR("Realtek WlanFAE "); +MODULE_AUTHOR("Larry Finger "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCI basic driver for rtlwifi"); static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = { PCI_VENDOR_ID_INTEL, @@ -1886,7 +1893,7 @@ int rtl_pci_probe(struct pci_dev *pdev, rtlpriv->rtlhal.interface = INTF_PCI; rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data); rtlpriv->intf_ops = &rtl_pci_ops; - rtlpriv->glb_var = &global_var; + rtlpriv->glb_var = &rtl_global_var; /* *init dbgp flags before all diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c index 71e917db8338..298b615964e8 100644 --- a/drivers/net/wireless/rtlwifi/ps.c +++ b/drivers/net/wireless/rtlwifi/ps.c @@ -269,6 +269,7 @@ void rtl_ips_nic_on(struct ieee80211_hw *hw) spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags); } +EXPORT_SYMBOL_GPL(rtl_ips_nic_on); /*for FW LPS*/ @@ -518,6 +519,7 @@ void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len) "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed); } } +EXPORT_SYMBOL_GPL(rtl_swlps_beacon); void rtl_swlps_rf_awake(struct ieee80211_hw *hw) { @@ -623,6 +625,7 @@ void rtl_lps_change_work_callback(struct work_struct *work) else rtl_lps_leave(hw); } +EXPORT_SYMBOL_GPL(rtl_lps_change_work_callback); void rtl_swlps_wq_callback(void *data) { @@ -934,3 +937,4 @@ void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len) else rtl_p2p_noa_ie(hw, data, len - FCS_LEN); } +EXPORT_SYMBOL_GPL(rtl_p2p_info); diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index 1feebdc92f41..e56778cac9bf 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -32,6 +32,13 @@ #include "ps.h" #include "rtl8192c/fw_common.h" #include +#include + +MODULE_AUTHOR("lizhaoming "); +MODULE_AUTHOR("Realtek WlanFAE "); +MODULE_AUTHOR("Larry Finger "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("USB basic driver for rtlwifi"); #define REALTEK_USB_VENQT_READ 0xC0 #define REALTEK_USB_VENQT_WRITE 0x40 -- cgit v1.2.3 From 64b6f46f1141ad938e354f37af62e28da972e8eb Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 15 Jul 2013 11:03:57 +0530 Subject: ath9k_hw: Fix multicast search for AR9002 family The multicast search bit is disabled for the AR9003 family, but this is required for AR9002 too. Fix this in the INI override routine. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d1acfe98918a..1576d58291d4 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -610,7 +610,15 @@ static void ar5008_hw_override_ini(struct ath_hw *ah, REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT)); if (AR_SREV_9280_20_OR_LATER(ah)) { - val = REG_READ(ah, AR_PCU_MISC_MODE2); + /* + * For AR9280 and above, there is a new feature that allows + * Multicast search based on both MAC Address and Key ID. + * By default, this feature is enabled. But since the driver + * is not using this feature, we switch it off; otherwise + * multicast search based on MAC addr only will fail. + */ + val = REG_READ(ah, AR_PCU_MISC_MODE2) & + (~AR_ADHOC_MCAST_KEYID_ENABLE); if (!AR_SREV_9271(ah)) val &= ~AR_PCU_MISC_MODE2_HWWAR1; -- cgit v1.2.3 From 233a26e85f9a72bcd0cdb7a95d1d5abcd052369f Mon Sep 17 00:00:00 2001 From: Maximilian Schneider Date: Tue, 2 Jul 2013 23:43:29 +0000 Subject: net: can: esd_usb2: check index of array before accessing The esd_usb2_read_bulk_callback() function is parsing the data that comes from the USB CAN adapter. One datum is used as an index to access the dev->nets[] array. This patch adds the missing bounds checking. Acked-by: Matthias Fuchs Signed-off-by: Maximilian Schneider Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/esd_usb2.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 6aa7b3266c80..ac6177d3befc 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -412,10 +412,20 @@ static void esd_usb2_read_bulk_callback(struct urb *urb) switch (msg->msg.hdr.cmd) { case CMD_CAN_RX: + if (msg->msg.rx.net >= dev->net_count) { + dev_err(dev->udev->dev.parent, "format error\n"); + break; + } + esd_usb2_rx_can_msg(dev->nets[msg->msg.rx.net], msg); break; case CMD_CAN_TX: + if (msg->msg.txdone.net >= dev->net_count) { + dev_err(dev->udev->dev.parent, "format error\n"); + break; + } + esd_usb2_tx_done_msg(dev->nets[msg->msg.txdone.net], msg); break; -- cgit v1.2.3 From 7671986839f9207f8d76e8ef92b2d3f263a794cc Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 18 Jul 2013 01:20:33 +0400 Subject: can: usb_8dev: fix urb leak on failure path in usb_8dev_start() If usb_8dev_start() fails to submit urb, it unanchors the urb but forgets to free it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/usb_8dev.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index cbd388eea682..8becd3d838b5 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -779,6 +779,7 @@ static int usb_8dev_start(struct usb_8dev_priv *priv) usb_unanchor_urb(urb); usb_free_coherent(priv->udev, RX_BUFFER_SIZE, buf, urb->transfer_dma); + usb_free_urb(urb); break; } -- cgit v1.2.3 From 372675a4a9ac0a0af962d44dadeea69926ce45e0 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 18 Jul 2013 08:38:26 -0700 Subject: vxlan: unregister on namespace exit Fix memory leaks and other badness from VXLAN network namespace teardown. When network namespace is removed, all the vxlan devices should be unregistered (not closed). Signed-off-by: Stephen Hemminger Reviewed-by: Pravin B Shelar Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index a5ba8dd7e6be..f101034a297a 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1878,10 +1878,12 @@ static __net_exit void vxlan_exit_net(struct net *net) { struct vxlan_net *vn = net_generic(net, vxlan_net_id); struct vxlan_dev *vxlan; + LIST_HEAD(list); rtnl_lock(); list_for_each_entry(vxlan, &vn->vxlan_list, next) - dev_close(vxlan->dev); + unregister_netdevice_queue(vxlan->dev, &list); + unregister_netdevice_many(&list); rtnl_unlock(); } -- cgit v1.2.3 From 3fc2de2faba387218bdf9dbc6b13f513ac3b060a Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Thu, 18 Jul 2013 08:40:15 -0700 Subject: vxlan: fix igmp races There are two race conditions in existing code for doing IGMP management in workqueue in vxlan. First, the vxlan_group_used function checks the list of vxlan's without any protection, and it is possible for open followed by close to occur before the igmp work queue runs. To solve these move the check into vxlan_open/stop so it is protected by RTNL. And split into two work structures so that there is no racy reference to underlying device state. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 53 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 38 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f101034a297a..f4c6db419ddb 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -136,7 +136,8 @@ struct vxlan_dev { u32 flags; /* VXLAN_F_* below */ struct work_struct sock_work; - struct work_struct igmp_work; + struct work_struct igmp_join; + struct work_struct igmp_leave; unsigned long age_interval; struct timer_list age_timer; @@ -736,7 +737,6 @@ static bool vxlan_snoop(struct net_device *dev, return false; } - /* See if multicast group is already in use by other ID */ static bool vxlan_group_used(struct vxlan_net *vn, __be32 remote_ip) { @@ -770,12 +770,13 @@ static void vxlan_sock_release(struct vxlan_net *vn, struct vxlan_sock *vs) queue_work(vxlan_wq, &vs->del_work); } -/* Callback to update multicast group membership. - * Scheduled when vxlan goes up/down. +/* Callback to update multicast group membership when first VNI on + * multicast asddress is brought up + * Done as workqueue because ip_mc_join_group acquires RTNL. */ -static void vxlan_igmp_work(struct work_struct *work) +static void vxlan_igmp_join(struct work_struct *work) { - struct vxlan_dev *vxlan = container_of(work, struct vxlan_dev, igmp_work); + struct vxlan_dev *vxlan = container_of(work, struct vxlan_dev, igmp_join); struct vxlan_net *vn = net_generic(dev_net(vxlan->dev), vxlan_net_id); struct vxlan_sock *vs = vxlan->vn_sock; struct sock *sk = vs->sock->sk; @@ -785,10 +786,27 @@ static void vxlan_igmp_work(struct work_struct *work) }; lock_sock(sk); - if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) - ip_mc_join_group(sk, &mreq); - else - ip_mc_leave_group(sk, &mreq); + ip_mc_join_group(sk, &mreq); + release_sock(sk); + + vxlan_sock_release(vn, vs); + dev_put(vxlan->dev); +} + +/* Inverse of vxlan_igmp_join when last VNI is brought down */ +static void vxlan_igmp_leave(struct work_struct *work) +{ + struct vxlan_dev *vxlan = container_of(work, struct vxlan_dev, igmp_leave); + struct vxlan_net *vn = net_generic(dev_net(vxlan->dev), vxlan_net_id); + struct vxlan_sock *vs = vxlan->vn_sock; + struct sock *sk = vs->sock->sk; + struct ip_mreqn mreq = { + .imr_multiaddr.s_addr = vxlan->default_dst.remote_ip, + .imr_ifindex = vxlan->default_dst.remote_ifindex, + }; + + lock_sock(sk); + ip_mc_leave_group(sk, &mreq); release_sock(sk); vxlan_sock_release(vn, vs); @@ -1359,6 +1377,7 @@ static void vxlan_uninit(struct net_device *dev) /* Start ageing timer and join group when device is brought up */ static int vxlan_open(struct net_device *dev) { + struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); struct vxlan_sock *vs = vxlan->vn_sock; @@ -1366,10 +1385,11 @@ static int vxlan_open(struct net_device *dev) if (!vs) return -ENOTCONN; - if (IN_MULTICAST(ntohl(vxlan->default_dst.remote_ip))) { + if (IN_MULTICAST(ntohl(vxlan->default_dst.remote_ip)) && + ! vxlan_group_used(vn, vxlan->default_dst.remote_ip)) { vxlan_sock_hold(vs); dev_hold(dev); - queue_work(vxlan_wq, &vxlan->igmp_work); + queue_work(vxlan_wq, &vxlan->igmp_join); } if (vxlan->age_interval) @@ -1400,13 +1420,15 @@ static void vxlan_flush(struct vxlan_dev *vxlan) /* Cleanup timer and forwarding table on shutdown */ static int vxlan_stop(struct net_device *dev) { + struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); struct vxlan_sock *vs = vxlan->vn_sock; - if (vs && IN_MULTICAST(ntohl(vxlan->default_dst.remote_ip))) { + if (vs && IN_MULTICAST(ntohl(vxlan->default_dst.remote_ip)) && + ! vxlan_group_used(vn, vxlan->default_dst.remote_ip)) { vxlan_sock_hold(vs); dev_hold(dev); - queue_work(vxlan_wq, &vxlan->igmp_work); + queue_work(vxlan_wq, &vxlan->igmp_leave); } del_timer_sync(&vxlan->age_timer); @@ -1471,7 +1493,8 @@ static void vxlan_setup(struct net_device *dev) INIT_LIST_HEAD(&vxlan->next); spin_lock_init(&vxlan->hash_lock); - INIT_WORK(&vxlan->igmp_work, vxlan_igmp_work); + INIT_WORK(&vxlan->igmp_join, vxlan_igmp_join); + INIT_WORK(&vxlan->igmp_leave, vxlan_igmp_leave); INIT_WORK(&vxlan->sock_work, vxlan_sock_work); init_timer_deferrable(&vxlan->age_timer); -- cgit v1.2.3 From 2deb535af7c824f37d6bc8657fd09e3d10696ee8 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 19 Jul 2013 16:56:26 -0400 Subject: qlcnic: Fix invalid register offset calculation 83xx adapter specific code was accessing 82xx register which resulted in invalid register offset. This patch uses proper register access method. Signed-off-by: Shahed Shaikh Signed-off-by: Jitendra Kalsaria Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 700a46324d09..05a847e599c6 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -1540,7 +1540,7 @@ qlcnic_set_dump(struct net_device *netdev, struct ethtool_dump *val) return 0; case QLCNIC_SET_QUIESCENT: case QLCNIC_RESET_QUIESCENT: - state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE); + state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE); if (state == QLCNIC_DEV_FAILED || (state == QLCNIC_DEV_BADBAD)) netdev_info(netdev, "Device in FAILED state\n"); return 0; -- cgit v1.2.3 From cfacb172fa699263a4f74a63d886e171fe3eafbe Mon Sep 17 00:00:00 2001 From: Pratik Pujar Date: Fri, 19 Jul 2013 16:56:27 -0400 Subject: qlcnic: Set __QLCNIC_DEV_UP in adapter state before enabling interrupts NAPI poll function does not re-enable the interrupt, if __QLCNIC_DEV_UP is not set in adapter state. This was preventing driver from receiving any packet. Signed-off-by: Pratik Pujar Signed-off-by: Jitendra Kalsaria Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 4528f8ec333b..41635f2b9399 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1531,12 +1531,12 @@ int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev) if (netdev->features & NETIF_F_LRO) qlcnic_config_hw_lro(adapter, QLCNIC_LRO_ENABLED); + set_bit(__QLCNIC_DEV_UP, &adapter->state); qlcnic_napi_enable(adapter); qlcnic_linkevent_request(adapter, 1); adapter->ahw->reset_context = 0; - set_bit(__QLCNIC_DEV_UP, &adapter->state); return 0; } -- cgit v1.2.3 From e9a355a9b407da41b7cb22767f3898d4628411b2 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 19 Jul 2013 16:56:28 -0400 Subject: qlcnic: Fix NULL pointer dereference in VF probe path. o Check for non-NULL set_mac_filter_count function pointer before calling it fixes the panic. This patch fixes regression introduced by patch "qlcnic: Secondary unicast MAC address support." with commit id 168e4fb54c11865668ad50eff81b5f2729e0e0f4. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index b00cf5665eab..f4bb8f5d7453 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1869,7 +1869,8 @@ static inline void qlcnic_free_mac_list(struct qlcnic_adapter *adapter) static inline void qlcnic_set_mac_filter_count(struct qlcnic_adapter *adapter) { - adapter->ahw->hw_ops->set_mac_filter_count(adapter); + if (adapter->ahw->hw_ops->set_mac_filter_count) + adapter->ahw->hw_ops->set_mac_filter_count(adapter); } static inline void qlcnic_dev_request_reset(struct qlcnic_adapter *adapter, -- cgit v1.2.3 From 8dc394af2e6159d3799b1219625db47c42a1964f Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 19 Jul 2013 16:56:29 -0400 Subject: qlcnic: Fix multicast packet handling for PF and VF. o Multicast MAC was not getting programmed due to which multicast packets were being dropped by FW. This patch fixes commit 168e4fb54c11865668ad50eff81b5f2729e0e0f4 ("qlcnic: Secondary unicast MAC address support.") which introduced bug in handling multicast packets. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 5b5d2edf125d..4ed7e73d88d3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -516,20 +516,18 @@ void __qlcnic_set_multi(struct net_device *netdev, u16 vlan) if (netdev->flags & IFF_PROMISC) { if (!(adapter->flags & QLCNIC_PROMISC_DISABLED)) mode = VPORT_MISS_MODE_ACCEPT_ALL; - } else if (netdev->flags & IFF_ALLMULTI) { - if (netdev_mc_count(netdev) > ahw->max_mc_count) { - mode = VPORT_MISS_MODE_ACCEPT_MULTI; - } else if (!netdev_mc_empty(netdev) && - !qlcnic_sriov_vf_check(adapter)) { - netdev_for_each_mc_addr(ha, netdev) - qlcnic_nic_add_mac(adapter, ha->addr, - vlan); - } - if (mode != VPORT_MISS_MODE_ACCEPT_MULTI && - qlcnic_sriov_vf_check(adapter)) - qlcnic_vf_add_mc_list(netdev, vlan); + } else if ((netdev->flags & IFF_ALLMULTI) || + (netdev_mc_count(netdev) > ahw->max_mc_count)) { + mode = VPORT_MISS_MODE_ACCEPT_MULTI; + } else if (!netdev_mc_empty(netdev) && + !qlcnic_sriov_vf_check(adapter)) { + netdev_for_each_mc_addr(ha, netdev) + qlcnic_nic_add_mac(adapter, ha->addr, vlan); } + if (qlcnic_sriov_vf_check(adapter)) + qlcnic_vf_add_mc_list(netdev, vlan); + /* configure unicast MAC address, if there is not sufficient space * to store all the unicast addresses then enable promiscuous mode */ -- cgit v1.2.3 From cab150b5874babb0a3d558c10d28c936fdf6ac69 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Fri, 19 Jul 2013 16:56:30 -0400 Subject: qlcnic: Fix panic while setting VF's MAC address o "qlcnic_sriov" structure pointer should be accessed only when SR-IOV is enabled. Access this pointer after SR-IOV PF check. Signed-off-by: Manish Chopra Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index ee0c1d307966..b9b88f3a7b51 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -1621,13 +1621,15 @@ int qlcnic_sriov_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_sriov *sriov = adapter->ahw->sriov; - int i, num_vfs = sriov->num_vfs; + int i, num_vfs; struct qlcnic_vf_info *vf_info; u8 *curr_mac; if (!qlcnic_sriov_pf_check(adapter)) return -EOPNOTSUPP; + num_vfs = sriov->num_vfs; + if (!is_valid_ether_addr(mac) || vf >= num_vfs) return -EINVAL; -- cgit v1.2.3 From 15d79747b57159fc1e063f1404e4f379cb5be026 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 19 Jul 2013 16:56:31 -0400 Subject: qlcnic: Fix ethtool display for 83xx adapter. o Commit b938662d88264c1a92611ca1b82fdff5a4e87121 ("qlcnic: Fix ethtool supported port status for 83xx") introduced regression for display of link status for 83xx adapter while refactoring port status display. This patch is to fix the link status display for 83xx adapter. Signed-off-by: Himanshu Madhani Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 0913c623a67e..bc483e1881a3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3014,8 +3014,8 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter, } if (ahw->port_type == QLCNIC_XGBE) { - ecmd->supported = SUPPORTED_1000baseT_Full; - ecmd->advertising = ADVERTISED_1000baseT_Full; + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->advertising = ADVERTISED_10000baseT_Full; } else { ecmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | -- cgit v1.2.3 From 744b66dde0dcdf3a0c31e1f6540d1f59d779ddd0 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 19 Jul 2013 16:56:32 -0400 Subject: qlcnic: Fix dump template version mask Driver was using wrong mask for template version. Signed-off-by: Shahed Shaikh Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c index ab8a6744d402..79e54efe07b9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_minidump.c @@ -1084,7 +1084,7 @@ flash_temp: tmpl_hdr = ahw->fw_dump.tmpl_hdr; tmpl_hdr->drv_cap_mask = QLCNIC_DUMP_MASK_DEF; - if ((tmpl_hdr->version & 0xffffff) >= 0x20001) + if ((tmpl_hdr->version & 0xfffff) >= 0x20001) ahw->fw_dump.use_pex_dma = true; else ahw->fw_dump.use_pex_dma = false; -- cgit v1.2.3 From b662eca098184184a4d9df09835c3740401fb6a0 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 19 Jul 2013 16:56:33 -0400 Subject: qlcnic: Fix releasing of Tx frag which was never mapped. o Driver was freeing Tx frag which was never mapped before which result into panic as kernel was unable to handle paging request. BUG: unable to handle kernel paging request at ffffc9002552a000 IP: [] qlcnic_release_tx_buffers+0x72/0x170 [qlcnic] PGD 87fc15067 PUD 47febf067 PMD 4758c5067 PTE 0 Oops: 0000 [#1] SMP crash> bt PID: 27343 TASK: ffff8802a5de8080 CPU: 27 COMMAND: "ifconfig" [ffff8802a34b3850] machine_kexec at ffffffff81035b7b [ffff8802a34b38b0] crash_kexec at ffffffff810c0db2 [ffff8802a34b3980] oops_end at ffffffff815111d0 [ffff8802a34b39b0] no_context at ffffffff81046bfb [ffff8802a34b3a00] __bad_area_nosemaphore at ffffffff81046e85 [ffff8802a34b3a50] bad_area_nosemaphore at ffffffff81046f53 [ffff8802a34b3a60] __do_page_fault at ffffffff810476b1 [ffff8802a34b3b80] do_page_fault at ffffffff8151311e [ffff8802a34b3bb0] page_fault at ffffffff815104d5 [exception RIP: qlcnic_release_tx_buffers+114] RIP: ffffffffa05ed762 RSP: ffff8802a34b3c68 RFLAGS: 00010246 RAX: ffff88087989c000 RBX: ffffc90025529ff8 RCX: 0000000000000001 RDX: 0000000000000013 RSI: 0000000000000013 RDI: 0000000000000000 RBP: ffff8802a34b3ca8 R8: 0000000000000000 R9: 0000000000000000 R10: 000000000000000c R11: 0000000000000000 R12: 0000000000000012 R13: ffffc90025529ec0 R14: ffff880761e876e0 R15: 00000000000003ff ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 [ffff8802a34b3cb0] __qlcnic_down at ffffffffa05e8b15 [qlcnic] [ffff8802a34b3d00] qlcnic_close at ffffffffa05e8b78 [qlcnic] [ffff8802a34b3d10] dev_close at ffffffff81449d81 [ffff8802a34b3d30] dev_change_flags at ffffffff814495c1 Signed-off-by: Jitendra Kalsaria Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index d28336fc65ab..a2023090e866 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -142,7 +142,7 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter) buffrag->length, PCI_DMA_TODEVICE); buffrag->dma = 0ULL; } - for (j = 0; j < cmd_buf->frag_count; j++) { + for (j = 1; j < cmd_buf->frag_count; j++) { buffrag++; if (buffrag->dma) { pci_unmap_page(adapter->pdev, buffrag->dma, -- cgit v1.2.3 From 2f0a9afaefcedfdb803e1347b0fe429cbd84d525 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Fri, 19 Jul 2013 16:56:34 -0400 Subject: qlcnic: Fix guest VLAN o Clear cached vport vlan variable(vp->vlan) in PF on PCI FLR and back-channel termination which will allow to configure guest VLAN on VF after force off/shut down the guest VM. Signed-off-by: Manish Chopra Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index b9b88f3a7b51..46aeb593fd52 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -635,10 +635,12 @@ static int qlcnic_sriov_pf_channel_cfg_cmd(struct qlcnic_bc_trans *trans, struct qlcnic_cmd_args *cmd) { struct qlcnic_vf_info *vf = trans->vf; - struct qlcnic_adapter *adapter = vf->adapter; - int err; + struct qlcnic_vport *vp = vf->vp; + struct qlcnic_adapter *adapter; u16 func = vf->pci_func; + int err; + adapter = vf->adapter; cmd->rsp.arg[0] = trans->req_hdr->cmd_op; cmd->rsp.arg[0] |= (1 << 16); @@ -650,6 +652,8 @@ static int qlcnic_sriov_pf_channel_cfg_cmd(struct qlcnic_bc_trans *trans, qlcnic_sriov_pf_config_vport(adapter, 0, func); } } else { + if (vp->vlan_mode == QLC_GUEST_VLAN_MODE) + vp->vlan = 0; err = qlcnic_sriov_pf_config_vport(adapter, 0, func); } @@ -1561,6 +1565,7 @@ void qlcnic_sriov_pf_handle_flr(struct qlcnic_sriov *sriov, struct qlcnic_vf_info *vf) { struct net_device *dev = vf->adapter->netdev; + struct qlcnic_vport *vp = vf->vp; if (!test_and_clear_bit(QLC_BC_VF_STATE, &vf->state)) { clear_bit(QLC_BC_VF_FLR, &vf->state); @@ -1573,6 +1578,9 @@ void qlcnic_sriov_pf_handle_flr(struct qlcnic_sriov *sriov, return; } + if (vp->vlan_mode == QLC_GUEST_VLAN_MODE) + vp->vlan = 0; + qlcnic_sriov_schedule_flr(sriov, vf, qlcnic_sriov_pf_process_flr); netdev_info(dev, "FLR received for PCI func %d\n", vf->pci_func); } -- cgit v1.2.3 From b69bbddfa136dc53ac319d58bc38b41f8aefffea Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Thu, 18 Jul 2013 16:15:11 -0300 Subject: veth: add vlan features The veth device doesn't provide the vlan features, so TSO for example is disabled and that causes performance issues when using tagged traffic. The test topology looks like this: br0 br1 / \ / \ vnet veth0.10 ----- veth1.10 vnet VM VM The netperf results with current veth driver: MIGRATED TCP STREAM TEST from 192.168.1.1 () port 0 AF_INET to 192.168.1.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 2210.22 Now after applying the proposed patch: MIGRATED TCP STREAM TEST from 192.168.1.1 () port 0 AF_INET to 192.168.1.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 13067.47 Signed-off-by: Flavio Leitner Signed-off-by: David S. Miller --- drivers/net/veth.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/veth.c b/drivers/net/veth.c index da866523cf20..eee1f19ef1e9 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -269,6 +269,7 @@ static void veth_setup(struct net_device *dev) dev->ethtool_ops = &veth_ethtool_ops; dev->features |= NETIF_F_LLTX; dev->features |= VETH_FEATURES; + dev->vlan_features = dev->features; dev->destructor = veth_dev_free; dev->hw_features = VETH_FEATURES; -- cgit v1.2.3 From 087d273caf4f7d3f2159256f255f1f432bc84a5b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 19 Jul 2013 08:48:05 +0300 Subject: arcnet: cleanup sizeof parameter This patch doesn't change the compiled code because ARC_HDR_SIZE is 4 and sizeof(int) is 4, but the intent was to use the header size and not the sizeof the header size. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/arcnet/arcnet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c index a746ba272f04..a956053608f9 100644 --- a/drivers/net/arcnet/arcnet.c +++ b/drivers/net/arcnet/arcnet.c @@ -1007,7 +1007,7 @@ static void arcnet_rx(struct net_device *dev, int bufnum) soft = &pkt.soft.rfc1201; - lp->hw.copy_from_card(dev, bufnum, 0, &pkt, sizeof(ARC_HDR_SIZE)); + lp->hw.copy_from_card(dev, bufnum, 0, &pkt, ARC_HDR_SIZE); if (pkt.hard.offset[0]) { ofs = pkt.hard.offset[0]; length = 256 - ofs; -- cgit v1.2.3 From 07b155031fb32b3c6ab7f9933a9c280146e4a7b2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 10 Jul 2013 23:03:36 +0200 Subject: ath10k: ATH10K should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_ring_free': drivers/net/wireless/ath/ath10k/htt_rx.c:113: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_htt_rx_amsdu_pop': drivers/net/wireless/ath/ath10k/htt_rx.c:296: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:389: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `__ath10k_htt_rx_ring_fill_n': drivers/net/wireless/ath/ath10k/htt_rx.c:146: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/htt_rx.c:150: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_htt_rx_attach': drivers/net/wireless/ath/ath10k/htt_rx.c:474: undefined reference to `dma_alloc_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:509: undefined reference to `dma_free_coherent' drivers/net/wireless/ath/ath10k/htt_rx.c:514: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_htt_rx_detach': drivers/net/wireless/ath/ath10k/htt_rx.c:220: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/htt_rx.c:228: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath10k_skb_map': drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath10k/core.h:83: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath10k/core.h:86: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath10k_skb_unmap': drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath10k/core.h:98: undefined reference to `dma_unmap_single' Signed-off-by: Geert Uytterhoeven Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig index cde58fe96254..82e8088ca9b4 100644 --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig @@ -1,6 +1,6 @@ config ATH10K tristate "Atheros 802.11ac wireless cards support" - depends on MAC80211 + depends on MAC80211 && HAS_DMA select ATH_COMMON ---help--- This module adds support for wireless adapters based on -- cgit v1.2.3 From a1923f1d4723e5757cefdd60f7c7ab30e472007a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 18 Jul 2013 19:11:26 +0300 Subject: iwlwifi: add DELL SKU for 5150 HMC This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: [all versions] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 81f3ea5b09a4..ff13458efc27 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -130,6 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */ + {IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */ -- cgit v1.2.3 From 232fde062e0a2cc52e8e18a50cda361b4ba88f34 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 13 Jul 2013 10:57:10 -0400 Subject: mwifiex: fix IRQ enable/disable During tear down (e.g. mwifiex_sdio_remove during system suspend), mwifiex left IRQs enabled for a significant period of time when it was unable to handle them correctly. This caused interrupt storms and interfered with the bluetooth interface on the same SDIO card. Solve this by disabling interrupts at the point when they can no longer be handled correctly, which is at the start of mwifiex_remove_card(). For cleanliness, we now enable interrupts in the mwifiex_add_card() path, to be symmetrical with the disabling of interrupts. We also couple the registration of the sdio IRQ handler with the actual enable/disable of interrupts at the hardware level. I also removed a write to this register in mwifiex_init_sdio which seemed pointless and won't cause any ill effects now that we only register the SDIO IRQ handler when we are ready to accept interrupts. Includes some corrections from Amitkumar Karwar. Signed-off-by: Daniel Drake Acked-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/init.c | 10 +--- drivers/net/wireless/mwifiex/main.c | 13 +++++- drivers/net/wireless/mwifiex/main.h | 1 + drivers/net/wireless/mwifiex/sdio.c | 91 +++++++++++++++++-------------------- drivers/net/wireless/mwifiex/sdio.h | 3 -- 5 files changed, 57 insertions(+), 61 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index caaf4bd56b30..2cf8b964e966 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -693,7 +693,7 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter, if (!ret) { dev_notice(adapter->dev, "WLAN FW already running! Skip FW dnld\n"); - goto done; + return 0; } poll_num = MAX_FIRMWARE_POLL_TRIES; @@ -719,14 +719,8 @@ int mwifiex_dnld_fw(struct mwifiex_adapter *adapter, poll_fw: /* Check if the firmware is downloaded successfully or not */ ret = adapter->if_ops.check_fw_status(adapter, poll_num); - if (ret) { + if (ret) dev_err(adapter->dev, "FW failed to be active in time\n"); - return -1; - } -done: - /* re-enable host interrupt for mwifiex after fw dnld is successful */ - if (adapter->if_ops.enable_int) - adapter->if_ops.enable_int(adapter); return ret; } diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index e15ab72fb03d..1753431de361 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -427,6 +427,10 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context) "Cal data request_firmware() failed\n"); } + /* enable host interrupt after fw dnld is successful */ + if (adapter->if_ops.enable_int) + adapter->if_ops.enable_int(adapter); + adapter->init_wait_q_woken = false; ret = mwifiex_init_fw(adapter); if (ret == -1) { @@ -478,6 +482,8 @@ err_add_intf: mwifiex_del_virtual_intf(adapter->wiphy, priv->wdev); rtnl_unlock(); err_init_fw: + if (adapter->if_ops.disable_int) + adapter->if_ops.disable_int(adapter); pr_debug("info: %s: unregister device\n", __func__); adapter->if_ops.unregister_dev(adapter); done: @@ -855,7 +861,7 @@ mwifiex_add_card(void *card, struct semaphore *sem, INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); /* Register the device. Fill up the private data structure with relevant - information from the card and request for the required IRQ. */ + information from the card. */ if (adapter->if_ops.register_dev(adapter)) { pr_err("%s: failed to register mwifiex device\n", __func__); goto err_registerdev; @@ -919,6 +925,11 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) if (!adapter) goto exit_remove; + /* We can no longer handle interrupts once we start doing the teardown + * below. */ + if (adapter->if_ops.disable_int) + adapter->if_ops.disable_int(adapter); + adapter->surprise_removed = true; /* Stop data */ diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 3da73d36acdf..253e0bd38e25 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -601,6 +601,7 @@ struct mwifiex_if_ops { int (*register_dev) (struct mwifiex_adapter *); void (*unregister_dev) (struct mwifiex_adapter *); int (*enable_int) (struct mwifiex_adapter *); + void (*disable_int) (struct mwifiex_adapter *); int (*process_int_status) (struct mwifiex_adapter *); int (*host_to_card) (struct mwifiex_adapter *, u8, struct sk_buff *, struct mwifiex_tx_param *); diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 5ee5ed02eccd..5ef49f2e375a 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -51,6 +51,7 @@ static struct mwifiex_if_ops sdio_ops; static struct semaphore add_remove_card_sem; static int mwifiex_sdio_resume(struct device *dev); +static void mwifiex_sdio_interrupt(struct sdio_func *func); /* * SDIO probe. @@ -296,6 +297,15 @@ static struct sdio_driver mwifiex_sdio = { } }; +/* Write data into SDIO card register. Caller claims SDIO device. */ +static int +mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data) +{ + int ret = -1; + sdio_writeb(func, data, reg, &ret); + return ret; +} + /* * This function writes data into SDIO card register. */ @@ -303,10 +313,10 @@ static int mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data) { struct sdio_mmc_card *card = adapter->card; - int ret = -1; + int ret; sdio_claim_host(card->func); - sdio_writeb(card->func, data, reg, &ret); + ret = mwifiex_write_reg_locked(card->func, reg, data); sdio_release_host(card->func); return ret; @@ -685,23 +695,15 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat) * The host interrupt mask is read, the disable bit is reset and * written back to the card host interrupt mask register. */ -static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) +static void mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) { - u8 host_int_mask, host_int_disable = HOST_INT_DISABLE; - - /* Read back the host_int_mask register */ - if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask)) - return -1; - - /* Update with the mask and write back to the register */ - host_int_mask &= ~host_int_disable; - - if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) { - dev_err(adapter->dev, "disable host interrupt failed\n"); - return -1; - } + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; - return 0; + sdio_claim_host(func); + mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, 0); + sdio_release_irq(func); + sdio_release_host(func); } /* @@ -713,14 +715,29 @@ static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter) { struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + int ret; + + sdio_claim_host(func); + + /* Request the SDIO IRQ */ + ret = sdio_claim_irq(func, mwifiex_sdio_interrupt); + if (ret) { + dev_err(adapter->dev, "claim irq failed: ret=%d\n", ret); + goto out; + } /* Simply write the mask to the register */ - if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, - card->reg->host_int_enable)) { + ret = mwifiex_write_reg_locked(func, HOST_INT_MASK_REG, + card->reg->host_int_enable); + if (ret) { dev_err(adapter->dev, "enable host interrupt failed\n"); - return -1; + sdio_release_irq(func); } - return 0; + +out: + sdio_release_host(func); + return ret; } /* @@ -997,9 +1014,6 @@ mwifiex_sdio_interrupt(struct sdio_func *func) } adapter = card->adapter; - if (adapter->surprise_removed) - return; - if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP) adapter->ps_state = PS_STATE_AWAKE; @@ -1728,9 +1742,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter) struct sdio_mmc_card *card = adapter->card; if (adapter->card) { - /* Release the SDIO IRQ */ sdio_claim_host(card->func); - sdio_release_irq(card->func); sdio_disable_func(card->func); sdio_release_host(card->func); sdio_set_drvdata(card->func, NULL); @@ -1744,7 +1756,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter) */ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) { - int ret = 0; + int ret; struct sdio_mmc_card *card = adapter->card; struct sdio_func *func = card->func; @@ -1753,22 +1765,14 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) sdio_claim_host(func); - /* Request the SDIO IRQ */ - ret = sdio_claim_irq(func, mwifiex_sdio_interrupt); - if (ret) { - pr_err("claim irq failed: ret=%d\n", ret); - goto disable_func; - } - /* Set block size */ ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE); + sdio_release_host(func); if (ret) { pr_err("cannot set SDIO block size\n"); - ret = -1; - goto release_irq; + return ret; } - sdio_release_host(func); sdio_set_drvdata(func, card); adapter->dev = &func->dev; @@ -1776,15 +1780,6 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) strcpy(adapter->fw_name, card->firmware); return 0; - -release_irq: - sdio_release_irq(func); -disable_func: - sdio_disable_func(func); - sdio_release_host(func); - adapter->card = NULL; - - return -1; } /* @@ -1813,9 +1808,6 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter) */ mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg); - /* Disable host interrupt mask register for SDIO */ - mwifiex_sdio_disable_host_int(adapter); - /* Get SDIO ioport */ mwifiex_init_sdio_ioport(adapter); @@ -1957,6 +1949,7 @@ static struct mwifiex_if_ops sdio_ops = { .register_dev = mwifiex_register_dev, .unregister_dev = mwifiex_unregister_dev, .enable_int = mwifiex_sdio_enable_host_int, + .disable_int = mwifiex_sdio_disable_host_int, .process_int_status = mwifiex_process_int_status, .host_to_card = mwifiex_sdio_host_to_card, .wakeup = mwifiex_pm_wakeup_card, diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index 6d51dfdd8251..532ae0ac4dfb 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -92,9 +92,6 @@ /* Host Control Registers : Download host interrupt mask */ #define DN_LD_HOST_INT_MASK (0x2U) -/* Disable Host interrupt mask */ -#define HOST_INT_DISABLE 0xff - /* Host Control Registers : Host interrupt status */ #define HOST_INTSTATUS_REG 0x03 /* Host Control Registers : Upload host interrupt status */ -- cgit v1.2.3 From dc2a87f519a4d8cb376ab54f22b6b98a943b51ce Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 19 Jul 2013 20:16:17 +0200 Subject: ath9k_htc: do some initial hardware configuration Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi Signed-off-by: Oleksij Rempel Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 71a183ffc77f..c3676bf1d6c4 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -861,6 +861,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv, if (error != 0) goto err_rx; + ath9k_hw_disable(priv->ah); #ifdef CONFIG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw, -- cgit v1.2.3 From 4928bd2ef8ece262f4f314630219999a91eaa440 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Fri, 19 Jul 2013 20:16:18 +0200 Subject: ath9k_htc: reboot firmware if it was loaded Currently ath9k_htc will reboot firmware only if interface was ever started. Which lead to the problem in case where interface was never started but module need to be reloaded. This patch will partially fix bug "ath9k_htc: Target is unresponsive" https://github.com/qca/open-ath9k-htc-firmware/issues/1 Reproduction case: - plug adapter - make sure nothing will touch it. Stop Networkmanager or blacklist mac address of this adapter. - rmmod ath9k_htc; sleep 1; modprobe ath9k_htc Signed-off-by: Oleksij Rempel Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 2469db5a5bb1..5205a3625e84 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -1295,7 +1295,9 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface) usb_set_intfdata(interface, NULL); - if (!unplugged && (hif_dev->flags & HIF_USB_START)) + /* If firmware was loaded we should drop it + * go back to first stage bootloader. */ + if (!unplugged && (hif_dev->flags & HIF_USB_READY)) ath9k_hif_usb_reboot(udev); kfree(hif_dev); -- cgit v1.2.3 From 16ec75b5de6479637993ad0f7c11a49aae069f68 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Fri, 19 Jul 2013 23:31:27 -0400 Subject: cw1200: Fix OOPS in monitor mode In monitor mode, priv->vif is NULL, but at one point in the receive path we blindly attempt to dereference it. Add a test to prevent this. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/cw1200/txrx.c b/drivers/net/wireless/cw1200/txrx.c index 5862c373d714..e824d4d4a18d 100644 --- a/drivers/net/wireless/cw1200/txrx.c +++ b/drivers/net/wireless/cw1200/txrx.c @@ -1165,7 +1165,7 @@ void cw1200_rx_cb(struct cw1200_common *priv, if (cw1200_handle_action_rx(priv, skb)) return; } else if (ieee80211_is_beacon(frame->frame_control) && - !arg->status && + !arg->status && priv->vif && !memcmp(ieee80211_get_SA(frame), priv->vif->bss_conf.bssid, ETH_ALEN)) { const u8 *tim_ie; -- cgit v1.2.3 From 5d21608a592a9afcac8d82c6478a564e911ce70b Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 20 Jul 2013 21:46:48 -0500 Subject: ath: wil6210: Fix build error Building driver wil6210 in 3.10 and 3.11 kernels yields the following errors: CC [M] drivers/net/wireless/ath/wil6210/debugfs.o drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_print_ring': drivers/net/wireless/ath/wil6210/debugfs.c:163:11: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ drivers/net/wireless/ath/wil6210/debugfs.c: In function 'wil_txdesc_debugfs_show': drivers/net/wireless/ath/wil6210/debugfs.c:429:10: error: pointer targets in passing argument 5 of 'hex_dump_to_buffer' differ in signedness [-Werror=pointer-sign] sizeof(printbuf), false); ^ In file included from include/linux/kernel.h:13:0, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/linux/printk.h:361:13: note: expected 'char *' but argument is of type 'unsigned char *' extern void hex_dump_to_buffer(const void *buf, size_t len, ^ cc1: all warnings being treated as errors make[5]: *** [drivers/net/wireless/ath/wil6210/debugfs.o] Error 1 make[4]: *** [drivers/net/wireless/ath/wil6210] Error 2 make[3]: *** [drivers/net/wireless/ath] Error 2 make[2]: *** [drivers/net/wireless] Error 2 make[1]: *** [drivers/net] Error 2 make: *** [drivers] Error 2 These errors are fixed by changing the type of the buffer from "unsigned char *" to "char *". Reported-by: Thomas Fjellstrom Tested-by: Thomas Fjellstrom Signed-off-by: Larry Finger Cc: Stable [3.10] Cc: Thomas Fjellstrom Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- drivers/net/wireless/ath/wil6210/debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c index e8308ec30970..ab636767fbde 100644 --- a/drivers/net/wireless/ath/wil6210/debugfs.c +++ b/drivers/net/wireless/ath/wil6210/debugfs.c @@ -145,7 +145,7 @@ static void wil_print_ring(struct seq_file *s, const char *prefix, le16_to_cpu(hdr.type), hdr.flags); if (len <= MAX_MBOXITEM_SIZE) { int n = 0; - unsigned char printbuf[16 * 3 + 2]; + char printbuf[16 * 3 + 2]; unsigned char databuf[MAX_MBOXITEM_SIZE]; void __iomem *src = wmi_buffer(wil, d.addr) + sizeof(struct wil6210_mbox_hdr); @@ -416,7 +416,7 @@ static int wil_txdesc_debugfs_show(struct seq_file *s, void *data) seq_printf(s, " SKB = %p\n", skb); if (skb) { - unsigned char printbuf[16 * 3 + 2]; + char printbuf[16 * 3 + 2]; int i = 0; int len = le16_to_cpu(d->dma.length); void *p = skb->data; -- cgit v1.2.3 From 28a905b51c2b3fabbb0eb53af229fc365200e398 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 22 Jul 2013 20:31:22 +0200 Subject: brcmfmac: decrement pending 8021x count upon tx failure If the transmit fails because there are no hanger slots or any other reason and the packet was an EAPOL packet the pending counter should be decreased although it was not transmitted so the driver does not end up in a dead-lock. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index f0d9f7f6c83d..29b1f24c2d0f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -1744,13 +1744,14 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) ulong flags; int fifo = BRCMF_FWS_FIFO_BCMC; bool multicast = is_multicast_ether_addr(eh->h_dest); + bool pae = eh->h_proto == htons(ETH_P_PAE); /* determine the priority */ if (!skb->priority) skb->priority = cfg80211_classify8021d(skb); drvr->tx_multicast += !!multicast; - if (ntohs(eh->h_proto) == ETH_P_PAE) + if (pae) atomic_inc(&ifp->pend_8021x_cnt); if (!brcmf_fws_fc_active(fws)) { @@ -1781,6 +1782,11 @@ int brcmf_fws_process_skb(struct brcmf_if *ifp, struct sk_buff *skb) brcmf_fws_schedule_deq(fws); } else { brcmf_err("drop skb: no hanger slot\n"); + if (pae) { + atomic_dec(&ifp->pend_8021x_cnt); + if (waitqueue_active(&ifp->pend_8021x_wait)) + wake_up(&ifp->pend_8021x_wait); + } brcmu_pkt_buf_free_skb(skb); } brcmf_fws_unlock(drvr, flags); -- cgit v1.2.3 From 23d412a2e94f55b84dbf9d5e64f381677bc90575 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 22 Jul 2013 12:46:24 +0200 Subject: brcmfmac: bail out of brcmf_txflowblock_if() for non-netdev interface To avoid ending up in a NULL-pointer access, the function brcmf_txflowblock_if() should only be called for interfaces that have a netdev associated with it. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 8e8975562ec3..80099016d21f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -242,7 +242,7 @@ void brcmf_txflowblock_if(struct brcmf_if *ifp, { unsigned long flags; - if (!ifp) + if (!ifp || !ifp->ndev) return; brcmf_dbg(TRACE, "enter: idx=%d stop=0x%X reason=%d state=%d\n", -- cgit v1.2.3 From f0e61604d747bf541808a1ebde6eeaef57e904e4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 19 Jul 2013 08:26:09 +0200 Subject: net: pch_gbe depends on x86 Since 4bb1667255a86360721291fe59991d033bbc2f2a (build some drivers only when compile-testing), PTP_1588_CLOCK_PCH depends on (X86 || COMPILE_TEST). But PCH_GBE selects PTP_1588_CLOCK_PCH without depending on x86. Fix this by adding the same dependency here. Signed-off-by: Jiri Slaby Reported-by: [intel's build test robot] Cc: "David S. Miller" Cc: Ben Hutchings Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman Cc: kbuild-all@01.org Signed-off-by: David S. Miller --- drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig index cb22341a14a8..a588ffde9700 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig +++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig @@ -4,7 +4,7 @@ config PCH_GBE tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE" - depends on PCI + depends on PCI && (X86 || COMPILE_TEST) select MII select PTP_1588_CLOCK_PCH ---help--- -- cgit v1.2.3 From 7aa0076c497d6f0d5d957b431d0d80e1e9780274 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 23 Jul 2013 00:17:25 +0100 Subject: sfc: Enable RX scatter for flows steered by RFS Received packets are only scattered if this is enabled in both the matching filter and the receiving queue. This was not being done for filters inserted for RFS, so any packet requiring more than a single descriptor was dropped. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/filter.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sfc/filter.c b/drivers/net/ethernet/sfc/filter.c index b74a60ab9ac7..2a469b27a506 100644 --- a/drivers/net/ethernet/sfc/filter.c +++ b/drivers/net/ethernet/sfc/filter.c @@ -1209,7 +1209,9 @@ int efx_filter_rfs(struct net_device *net_dev, const struct sk_buff *skb, EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + 4 * ip->ihl + 4); ports = (const __be16 *)(skb->data + nhoff + 4 * ip->ihl); - efx_filter_init_rx(&spec, EFX_FILTER_PRI_HINT, 0, rxq_index); + efx_filter_init_rx(&spec, EFX_FILTER_PRI_HINT, + efx->rx_scatter ? EFX_FILTER_FLAG_RX_SCATTER : 0, + rxq_index); rc = efx_filter_set_ipv4_full(&spec, ip->protocol, ip->daddr, ports[1], ip->saddr, ports[0]); if (rc) -- cgit v1.2.3 From f8c0aca9fda7856a8a8d61d523ba3187affbd714 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 20 Jul 2013 16:20:36 -0300 Subject: fec: Add MODULE_ALIAS Add MODULE_ALIAS, so that auto module loading can work. Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index d3ad5ea711d3..f0f0e96453a0 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2279,4 +2279,5 @@ static struct platform_driver fec_driver = { module_platform_driver(fec_driver); +MODULE_ALIAS("platform:"DRIVER_NAME); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 5312e54d7e8bfe9716a1ffbc50e0093aadde46b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Jul 2013 18:26:56 +0200 Subject: iwlwifi: mvm: use only a single GTK in D3 Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by: Yaron Vaknin Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 7e5e5c2f9f87..83da884cf303 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -134,7 +134,7 @@ struct wowlan_key_data { struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc; struct iwl_wowlan_tkip_params_cmd *tkip; bool error, use_rsc_tsc, use_tkip; - int gtk_key_idx; + int wep_key_idx; }; static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, @@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, wkc.wep_key.key_offset = 0; } else { /* others start at 1 */ - data->gtk_key_idx++; - wkc.wep_key.key_offset = data->gtk_key_idx; + data->wep_key_idx++; + wkc.wep_key.key_offset = data->wep_key_idx; } ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC, @@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, mvm->ptk_ivlen = key->iv_len; mvm->ptk_icvlen = key->icv_len; } else { - data->gtk_key_idx++; - key->hw_key_idx = data->gtk_key_idx; + /* + * firmware only supports TSC/RSC for a single key, + * so if there are multiple keep overwriting them + * with new ones -- this relies on mac80211 doing + * list_add_tail(). + */ + key->hw_key_idx = 1; mvm->gtk_ivlen = key->iv_len; mvm->gtk_icvlen = key->icv_len; } -- cgit v1.2.3 From bb963c4a43eb5127eb0bbfa16c7a6a209b0af5db Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Tue, 23 Jul 2013 14:13:32 +0300 Subject: iwlwifi: mvm: set SSID bits for passive channels Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: David Spinadel Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 1 - drivers/net/wireless/iwlwifi/mvm/scan.c | 11 ++--------- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index b60d14151721..365095a0c3b3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -69,7 +69,6 @@ /* Scan Commands, Responses, Notifications */ /* Masks for iwl_scan_channel.type flags */ -#define SCAN_CHANNEL_TYPE_PASSIVE 0 #define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) #define SCAN_CHANNEL_NARROW_BAND BIT(22) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 268f027b45b0..acdff6b67e04 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -178,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, struct iwl_scan_channel *chan = (struct iwl_scan_channel *) (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); int i; - __le32 chan_type_value; - - if (req->n_ssids > 0) - chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1); - else - chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; for (i = 0; i < cmd->channel_count; i++) { chan->channel = cpu_to_le16(req->channels[i]->hw_value); + chan->type = cpu_to_le32(BIT(req->n_ssids) - 1); if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) - chan->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - chan->type = chan_type_value; + chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE); chan->active_dwell = cpu_to_le16(active_dwell); chan->passive_dwell = cpu_to_le16(passive_dwell); chan->iteration_count = cpu_to_le16(1); -- cgit v1.2.3 From 4ea72445bddd2ca09fc719065fc3c5a8bfc8ca10 Mon Sep 17 00:00:00 2001 From: Lekensteyn Date: Mon, 22 Jul 2013 09:53:30 +0200 Subject: r8169: fix lockdep warning when removing interface The work queue is initialised in rtl_open (when the interface goes up), but canceled in rtl_remove_one (when the PCI device gets removed). If the network interface is not brought up, then the work queue struct is not initialised. When the device is removed, the attempt to cancel the uninitialised work queue causes a lockdep warning. This patch fixes the issue by moving cancel_work_sync to rtl_close (to match rtl_open). (Note that rtl_close is also called via unregister_netdev in rtl_remove_one.) Signed-off-by: Peter Wu Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 4106a743ca74..880015cae6a3 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6468,6 +6468,8 @@ static int rtl8169_close(struct net_device *dev) rtl8169_down(dev); rtl_unlock_work(tp); + cancel_work_sync(&tp->wk.work); + free_irq(pdev->irq, dev); dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray, @@ -6793,8 +6795,6 @@ static void rtl_remove_one(struct pci_dev *pdev) rtl8168_driver_stop(tp); } - cancel_work_sync(&tp->wk.work); - netif_napi_del(&tp->napi); unregister_netdev(dev); -- cgit v1.2.3 From 64d2c22a4cdd3ce752ca700964a6120049d78aed Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 22 Jul 2013 11:02:01 +0300 Subject: mlx5: use after free in mlx5_cmd_comp_handler() We can't dereference "ent" after passing it to free_cmd(). Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 205753a04cfc..40374063c01e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1113,7 +1113,13 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, unsigned long vector) for (i = 0; i < (1 << cmd->log_sz); i++) { if (test_bit(i, &vector)) { + struct semaphore *sem; + ent = cmd->ent_arr[i]; + if (ent->page_queue) + sem = &cmd->pages_sem; + else + sem = &cmd->sem; ktime_get_ts(&ent->ts2); memcpy(ent->out->first.data, ent->lay->out, sizeof(ent->lay->out)); dump_command(dev, ent, 0); @@ -1136,10 +1142,7 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, unsigned long vector) } else { complete(&ent->done); } - if (ent->page_queue) - up(&cmd->pages_sem); - else - up(&cmd->sem); + up(sem); } } } -- cgit v1.2.3 From 2bf420a7686e0fdd2fbf16d75e729b306744db0d Mon Sep 17 00:00:00 2001 From: Emilio López Date: Mon, 22 Jul 2013 22:09:18 -0300 Subject: net: sun4i: fix timeout check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current timeout check is comparing two constant values, so it won't ever detect a timeout. This patch reworks the affected code a bit so it has a chance at detecting timeouts correctly. Signed-off-by: Emilio López Acked-by: Maxime Ripard Signed-off-by: David S. Miller --- drivers/net/phy/mdio-sun4i.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c index 61d3f4ebf52e..7f25e49ae37f 100644 --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -40,7 +40,7 @@ struct sun4i_mdio_data { static int sun4i_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { struct sun4i_mdio_data *data = bus->priv; - unsigned long start_jiffies; + unsigned long timeout_jiffies; int value; /* issue the phy address and reg */ @@ -49,10 +49,9 @@ static int sun4i_mdio_read(struct mii_bus *bus, int mii_id, int regnum) writel(0x1, data->membase + EMAC_MAC_MCMD_REG); /* Wait read complete */ - start_jiffies = jiffies; + timeout_jiffies = jiffies + MDIO_TIMEOUT; while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) { - if (time_after(start_jiffies, - start_jiffies + MDIO_TIMEOUT)) + if (time_is_before_jiffies(timeout_jiffies)) return -ETIMEDOUT; msleep(1); } @@ -69,7 +68,7 @@ static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct sun4i_mdio_data *data = bus->priv; - unsigned long start_jiffies; + unsigned long timeout_jiffies; /* issue the phy address and reg */ writel((mii_id << 8) | regnum, data->membase + EMAC_MAC_MADR_REG); @@ -77,10 +76,9 @@ static int sun4i_mdio_write(struct mii_bus *bus, int mii_id, int regnum, writel(0x1, data->membase + EMAC_MAC_MCMD_REG); /* Wait read complete */ - start_jiffies = jiffies; + timeout_jiffies = jiffies + MDIO_TIMEOUT; while (readl(data->membase + EMAC_MAC_MIND_REG) & 0x1) { - if (time_after(start_jiffies, - start_jiffies + MDIO_TIMEOUT)) + if (time_is_before_jiffies(timeout_jiffies)) return -ETIMEDOUT; msleep(1); } -- cgit v1.2.3 From 2997494fa66a1c94717d69c3cfae0a94462093c6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 24 Jul 2013 10:19:06 +0300 Subject: iwlwifi: pcie: reset the NIC before the bring up This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 826c15602c46..96cfcdd39079 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -670,6 +670,11 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) return err; } + /* Reset the entire device */ + iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + + usleep_range(10, 15); + iwl_pcie_apm_init(trans); /* From now on, the op_mode will be kept updated about RF kill state */ -- cgit v1.2.3 From ea183d02e1ddfda1996d7df1e55f3a639830e335 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Tue, 23 Jul 2013 14:41:53 +0300 Subject: iwlwifi: mvm: Disable managed PS when GO is added The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 1eedc424051c..f19baf0dea6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -511,6 +511,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, if (ret) goto out_unlock; + /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * If new interface added, disable PM on existing interface. + * P2P device is a special case, since it is handled by FW similary to + * scan. If P2P deviced is added, PM remains enabled on existing + * interface. + * Note: the method below does not count the new interface being added + * at this moment. + */ + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) + mvm->vif_count++; + if (mvm->vif_count > 1) { + IWL_DEBUG_MAC80211(mvm, + "Disable power on existing interfaces\n"); + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_pm_disable_iterator, mvm); + } + /* * The AP binding flow can be done only after the beacon * template is configured (which happens only in the mac80211 @@ -534,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; } - /* - * TODO: remove this temporary code. - * Currently MVM FW supports power management only on single MAC. - * If new interface added, disable PM on existing interface. - * P2P device is a special case, since it is handled by FW similary to - * scan. If P2P deviced is added, PM remains enabled on existing - * interface. - * Note: the method below does not count the new interface being added - * at this moment. - */ - if (vif->type != NL80211_IFTYPE_P2P_DEVICE) - mvm->vif_count++; - if (mvm->vif_count > 1) { - IWL_DEBUG_MAC80211(mvm, - "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces_atomic( - mvm->hw, - IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_pm_disable_iterator, mvm); - } - ret = iwl_mvm_mac_ctxt_add(mvm, vif); if (ret) goto out_release; -- cgit v1.2.3 From b6658ff80c43bcf84be0bbe371c88af1452e7776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Jul 2013 13:55:51 +0200 Subject: iwlwifi: mvm: fix flushing not started aggregation sessions When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_fmt+0x47/0x50 [] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [] __sta_info_destroy+0x66/0x370 [mac80211] [] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [] ieee80211_del_station+0x26/0x50 [mac80211] [] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 85d4bbe52157..563f559b902d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -915,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; u16 txq_id; + enum iwl_mvm_agg_state old_state; /* * First set the agg state to OFF to avoid calling @@ -924,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, txq_id = tid_data->txq_id; IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n", mvmsta->sta_id, tid, txq_id, tid_data->state); + old_state = tid_data->state; tid_data->state = IWL_AGG_OFF; spin_unlock_bh(&mvmsta->lock); - if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) - IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + if (old_state >= IWL_AGG_ON) { + if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) + IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + + iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); + } - iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); mvm->queue_to_mac80211[tid_data->txq_id] = IWL_INVALID_MAC80211_QUEUE; -- cgit v1.2.3 From a53ee0a308b16e392e0219c585b10f329345766b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 25 Jul 2013 13:14:34 +0300 Subject: iwlwifi: pcie: clear RFKILL interrupt in AMPG If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-prph.h | 2 ++ drivers/net/wireless/iwlwifi/pcie/rx.c | 8 ++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index ff8cc75c189d..a70c7b9d9bad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,6 +97,8 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_RTC_INT_STT_RFKILL (0x10000000) + /* Device system time */ #define DEVICE_SYSTEM_TIME_REG 0xA0206C diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index fd848cd1583e..f600e68a410a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -888,6 +888,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { + /* + * Clear the interrupt in APMG if the NIC is going down. + * Note that when the NIC exits RFkill (else branch), we + * can't access prph and the NIC will be reset in + * start_hw anyway. + */ + iwl_write_prph(trans, APMG_RTC_INT_STT_REG, + APMG_RTC_INT_STT_RFKILL); set_bit(STATUS_RFKILL, &trans_pcie->status); if (test_and_clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) -- cgit v1.2.3 From 20f0170377264e8449b6987041f0bcc4d746d3ed Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 23 Jul 2013 17:15:54 -0700 Subject: usbnet: do not pretend to support SG/TSO usbnet doesn't support yet SG, so drivers should not advertise SG or TSO capabilities, as they allow TCP stack to build large TSO packets that need to be linearized and might use order-5 pages. This adds an extra copy overhead and possible allocation failures. Current code ignore skb_linearize() return code so crashes are even possible. Best is to not pretend SG/TSO is supported, and add this again when/if usbnet really supports SG for devices who could get a performance gain. Based on a prior patch from Freddy Xin Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 9 ++++----- drivers/net/usb/smsc75xx.c | 12 +++--------- 2 files changed, 7 insertions(+), 14 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 1e3c302d94fe..2bc87e3a8141 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1029,10 +1029,10 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.supports_gmii = 1; dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO; + NETIF_F_RXCSUM; dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO; + NETIF_F_RXCSUM; /* Enable checksum offload */ *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP | @@ -1173,7 +1173,6 @@ ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) if (((skb->len + 8) % frame_size) == 0) tx_hdr2 |= 0x80008000; /* Enable padding */ - skb_linearize(skb); headroom = skb_headroom(skb); tailroom = skb_tailroom(skb); @@ -1317,10 +1316,10 @@ static int ax88179_reset(struct usbnet *dev) 1, 1, tmp); dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO; + NETIF_F_RXCSUM; dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO; + NETIF_F_RXCSUM; /* Enable checksum offload */ *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP | diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 75409748c774..66ebbacf066f 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -45,7 +45,6 @@ #define EEPROM_MAC_OFFSET (0x01) #define DEFAULT_TX_CSUM_ENABLE (true) #define DEFAULT_RX_CSUM_ENABLE (true) -#define DEFAULT_TSO_ENABLE (true) #define SMSC75XX_INTERNAL_PHY_ID (1) #define SMSC75XX_TX_OVERHEAD (8) #define MAX_RX_FIFO_SIZE (20 * 1024) @@ -1410,17 +1409,14 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write); - if (DEFAULT_TX_CSUM_ENABLE) { + if (DEFAULT_TX_CSUM_ENABLE) dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; - if (DEFAULT_TSO_ENABLE) - dev->net->features |= NETIF_F_SG | - NETIF_F_TSO | NETIF_F_TSO6; - } + if (DEFAULT_RX_CSUM_ENABLE) dev->net->features |= NETIF_F_RXCSUM; dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | - NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM; + NETIF_F_RXCSUM; ret = smsc75xx_wait_ready(dev, 0); if (ret < 0) { @@ -2200,8 +2196,6 @@ static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev, { u32 tx_cmd_a, tx_cmd_b; - skb_linearize(skb); - if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) { struct sk_buff *skb2 = skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags); -- cgit v1.2.3 From 05bc250fe623e61e132dc1f771fca0a842ea60b6 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 24 Jul 2013 09:11:37 +0200 Subject: drivers: net: allwinner: Fix Kconfig indentation Signed-off-by: Maxime Ripard Signed-off-by: David S. Miller --- drivers/net/ethernet/allwinner/Kconfig | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index 53ad213e865b..cf7aa24d559c 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -3,19 +3,20 @@ # config NET_VENDOR_ALLWINNER - bool "Allwinner devices" - default y - depends on ARCH_SUNXI - ---help--- - If you have a network (Ethernet) card belonging to this - class, say Y and read the Ethernet-HOWTO, available from - . + bool "Allwinner devices" + default y - Note that the answer to this question doesn't directly - affect the kernel: saying N will just cause the configurator - to skip all the questions about Allwinner cards. If you say Y, - you will be asked for your specific card in the following - questions. + depends on ARCH_SUNXI + ---help--- + If you have a network (Ethernet) card belonging to this + class, say Y and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly + affect the kernel: saying N will just cause the configurator + to skip all the questions about Allwinner cards. If you say Y, + you will be asked for your specific card in the following + questions. if NET_VENDOR_ALLWINNER -- cgit v1.2.3 From 111cc5da2a95568ca20a5f86f43ae328c069e455 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 24 Jul 2013 09:12:08 +0200 Subject: drivers: net: sun4i-emac: select MDIO_SUN4I The EMAC driver can't work without its associated PHY driver. Reflect this in the Kconfig options by selecting it. Signed-off-by: Maxime Ripard Signed-off-by: David S. Miller --- drivers/net/ethernet/allwinner/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/allwinner/Kconfig b/drivers/net/ethernet/allwinner/Kconfig index cf7aa24d559c..d8d95d4cd45a 100644 --- a/drivers/net/ethernet/allwinner/Kconfig +++ b/drivers/net/ethernet/allwinner/Kconfig @@ -27,6 +27,7 @@ config SUN4I_EMAC select CRC32 select MII select PHYLIB + select MDIO_SUN4I ---help--- Support for Allwinner A10 EMAC ethernet driver. -- cgit v1.2.3 From 83e612f632c3897be29ef02e0472f6d63e258378 Mon Sep 17 00:00:00 2001 From: Tomasz Moń Date: Tue, 23 Jul 2013 07:42:49 +0200 Subject: mwifiex: Add missing endian conversion. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Both type and pkt_len variables are in host endian and these should be in Little Endian in the payload. Signed-off-by: Tomasz Moń Acked-by: Bing Zhao Cc: Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index 5ef49f2e375a..09185c963248 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1639,8 +1639,8 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter, /* Allocate buffer and copy payload */ blk_size = MWIFIEX_SDIO_BLOCK_SIZE; buf_block_len = (pkt_len + blk_size - 1) / blk_size; - *(u16 *) &payload[0] = (u16) pkt_len; - *(u16 *) &payload[2] = type; + *(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len); + *(__le16 *)&payload[2] = cpu_to_le16(type); /* * This is SDIO specific header -- cgit v1.2.3 From a538ae3189a9fa4095ca58c14bc6593622c89ab9 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 25 Jul 2013 23:01:34 +0200 Subject: brcmfmac: inform cfg80211 about disconnect when device is unplugged When the brcmfmac device is physically removed cfg80211 gives a warning upon unregistering the net device (see below). [23052.390197] WARNING: CPU: 0 PID: 30 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211]() [23052.400843] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) pl2303 usbserial binfmt_misc snd_hda_codec_hdmi snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event lpc_ich snd_seq snd_timer snd_seq_device snd psmouse mfd_core serio_raw soundcore snd_page_alloc intel_ips dell_laptop dell_wmi sparse_keymap dcdbas nouveau ttm drm_kms_helper drm i2c_algo_bit mxm_wmi ahci libahci sdhci_pci firewire_ohci firewire_core sdhci crc_itu_t mmc_core intel_agp intel_gtt e1000e ptp pps_core agpgart video [last unloaded: brcmfmac] [23052.452987] CPU: 0 PID: 30 Comm: khubd Tainted: G O 3.11.0-rc1-wl-testing-lockdep-00002-g41cc093-dirty #1 [23052.463480] Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011 [23052.470852] 00000000 00000000 f4efdc18 c1522e3d f845bed2 f4efdc48 c103fbe4 c16a9254 [23052.478762] 00000000 0000001e f845bed2 000003a9 f841da44 f841da44 f3790004 f25539c0 [23052.486741] e2700200 f4efdc58 c103fc22 00000009 00000000 f4efdcc0 f841da44 00000002 [23052.494712] Call Trace: [23052.497165] [] dump_stack+0x4b/0x66 [23052.501685] [] warn_slowpath_common+0x84/0xa0 [23052.507085] [] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.514542] [] ? cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.521981] [] warn_slowpath_null+0x22/0x30 [23052.527191] [] cfg80211_netdev_notifier_call+0x164/0x600 [cfg80211] [23052.534494] [] ? packet_notifier+0xc8/0x1d0 [23052.539703] [] ? packet_notifier+0xdc/0x1d0 [23052.544880] [] ? packet_seq_stop+0x30/0x30 [23052.550002] [] notifier_call_chain+0x45/0x60 [23052.555298] [] raw_notifier_call_chain+0x1f/0x30 [23052.560963] [] call_netdevice_notifiers_info+0x33/0x70 [23052.567153] [] ? qdisc_destroy+0x99/0xb0 [23052.572116] [] call_netdevice_notifiers+0x13/0x20 [23052.577861] [] rollback_registered_many+0xf3/0x1d0 [23052.583687] [] ? mutex_lock_nested+0x25c/0x350 [23052.589150] [] rollback_registered+0x24/0x40 [23052.594445] [] unregister_netdevice_queue+0x4f/0xb0 [23052.600344] [] unregister_netdev+0x19/0x30 [23052.605484] [] brcmf_del_if+0xbf/0x160 [brcmfmac] [23052.611223] [] brcmf_detach+0x5e/0xd0 [brcmfmac] [23052.616881] [] brcmf_usb_disconnect+0x63/0xa0 [brcmfmac] [23052.623217] [] usb_unbind_interface+0x4a/0x180 When the device is physically connected the driver sends a disassoc command to the device and response triggers the driver to inform cfg80211 about it. However, with the device removed the disassoc command fails. This patch adds a call to cfg80211_disconnected() when that command fails. The warning was added by commit below and also cleans up, but better doing it in the driver if only to get rid of the warning. commit f9bef3df52fe61067e4c1c6cfb2037cb6b259a6a Author: Ben Greear Date: Wed Jun 19 14:06:26 2013 -0700 wireless: check for dangling wdev->current_bss pointer Cc: Ben Greear Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 277b37ae7126..7fa71f73cfe8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1093,8 +1093,11 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n "); err = brcmf_fil_cmd_data_set(vif->ifp, BRCMF_C_DISASSOC, NULL, 0); - if (err) + if (err) { brcmf_err("WLC_DISASSOC failed (%d)\n", err); + cfg80211_disconnected(vif->wdev.netdev, 0, + NULL, 0, GFP_KERNEL); + } clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state); } clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state); -- cgit v1.2.3 From d8af4dfd84329015e18ea3d83a84c46e92f21020 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 24 Jul 2013 17:25:08 +0800 Subject: net/tg3: Fix kernel crash While EEH error happens, we might not have network device instance (struct net_device) yet. So we can't access the instance safely and check its link state, which causes kernel crash. The patch fixes it. EEH: Frozen PE#2 on PHB#3 detected EEH: This PCI device has failed 1 times in the last hour EEH: Notify device drivers to shutdown (NULL net_device): PCI I/O error detected Unable to handle kernel paging request for data at address 0x00000048 Faulting instruction address: 0xd00000001c9387a8 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA PowerNV : NIP [d00000001c9387a8] .tg3_io_error_detected+0x78/0x2a0 [tg3] LR [d00000001c9387a4] .tg3_io_error_detected+0x74/0x2a0 [tg3] Call Trace: [c000003f93a0f960] [d00000001c9387a4] .tg3_io_error_detected+0x74/0x2a0 [tg3] [c000003f93a0fa30] [c00000000003844c] .eeh_report_error+0xac/0x120 [c000003f93a0fac0] [c0000000000371bc] .eeh_pe_dev_traverse+0x8c/0x150 [c000003f93a0fb60] [c000000000038858] .eeh_handle_normal_event+0x128/0x3d0 [c000003f93a0fbf0] [c000000000038db8] .eeh_handle_event+0x2b8/0x2c0 [c000003f93a0fc90] [c000000000038e80] .eeh_event_handler+0xc0/0x170 [c000003f93a0fd30] [c0000000000cc000] .kthread+0xf0/0x100 [c000003f93a0fe30] [c00000000000a0dc] .ret_from_kernel_thread+0x5c/0x80 Reported-by: Wei Yang Signed-off-by: Gavin Shan Acked-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d964f302ac94..aee1b9a79b30 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17773,7 +17773,8 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev, rtnl_lock(); - if (!netif_running(netdev)) + /* We probably don't have netdev yet */ + if (!netdev || !netif_running(netdev)) goto done; tg3_phy_stop(tp); -- cgit v1.2.3 From c80dc13dda73db67e156b161d06c78f266b36ea6 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 24 Jul 2013 17:25:09 +0800 Subject: net/tg3: Fix warning from pci_disable_device() The patch fixes following warning. The PCI device might have been disabled somewhere else when we have EEH errors during early stage. Device tg3 disabling already-disabled device WARNING: at drivers/pci/pci.c:1403 : NIP [c00000000044fd5c] .pci_disable_device+0xcc/0xe0 LR [c00000000044fd58] .pci_disable_device+0xc8/0xe0 Call Trace: [c000003f80bc7370] [c00000000044fd58] .pci_disable_device+0xc8/0xe0 [c000003f80bc73f0] [d00000001cfe8fc0] .tg3_init_one+0x2f0/0x19f0 [tg3] [c000003f80bc74d0] [c0000000004534e8] .local_pci_probe+0x68/0xb0 [c000003f80bc7560] [c0000000004537c8] .pci_device_probe+0x198/0x1a0 [c000003f80bc7610] [c0000000004f9e98] .driver_probe_device+0xd8/0x450 [c000003f80bc76a0] [c0000000004fa3bc] .__driver_attach+0x10c/0x110 [c000003f80bc7730] [c0000000004f6e94] .bus_for_each_dev+0x94/0x100 [c000003f80bc77d0] [c0000000004f9634] .driver_attach+0x34/0x50 [c000003f80bc7850] [c0000000004f8f98] .bus_add_driver+0x288/0x380 [c000003f80bc78f0] [c0000000004fae2c] .driver_register+0x9c/0x200 [c000003f80bc7980] [c000000000453214] .__pci_register_driver+0x64/0x90 [c000003f80bc7a10] [d00000001cff7a60] .tg3_driver_init+0x2c/0x40 [tg3] [c000003f80bc7a80] [c00000000000b424] .do_one_initcall+0x144/0x1f0 [c000003f80bc7b70] [c0000000001244a0] .load_module+0x1f30/0x2700 [c000003f80bc7d40] [c000000000124e80] .SyS_finit_module+0xc0/0x110 [c000003f80bc7e30] [c000000000009dd4] syscall_exit+0x0/0x98 Reported-by: Wei Yang Signed-off-by: Gavin Shan Acked-by: Nithin Nayak Sujir Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index aee1b9a79b30..ddebc7a5dda0 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17625,7 +17625,8 @@ err_out_free_res: pci_release_regions(pdev); err_out_disable_pdev: - pci_disable_device(pdev); + if (pci_is_enabled(pdev)) + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); return err; } -- cgit v1.2.3 From ebe7fdbaf3e90ea22feade6c9f5e50f42b23b6d8 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 26 Jul 2013 12:47:14 -0400 Subject: atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring atl1c uses netdev_alloc_skb to refill its rx dma ring, but that call makes no guarantees about the suitability of the memory for use in DMA. As a result we've gotten reports of atl1c drivers occasionally hanging and needing to be reset: https://bugzilla.kernel.org/show_bug.cgi?id=54021 Fix this by modifying the call to use the internal version __netdev_alloc_skb, where you can set the gfp_mask explicitly to include GFP_DMA. Tested by two reporters in the above bug, who have the hardware to validate it. Both report immediate cessation of the problem with this patch Signed-off-by: Neil Horman CC: Jay Cliburn CC: "David S. Miller" CC: stable@vger.kernel.org Tested-by: Luis Henriques Tested-by: Vincent Alquier Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 786a87483298..d5e38d1ea3a2 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1660,7 +1660,7 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) while (next_info->flags & ATL1C_BUFFER_FREE) { rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); - skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len); + skb = __netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len, GFP_ATOMIC|GFP_DMA); if (unlikely(!skb)) { if (netif_msg_rx_err(adapter)) dev_warn(&pdev->dev, "alloc rx buffer failed\n"); -- cgit v1.2.3 From fafb6ebe384e62e68519ae8f5ae9b2cb578d7dde Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 27 Jul 2013 20:00:44 -0700 Subject: Revert "atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring" This reverts commit ebe7fdbaf3e90ea22feade6c9f5e50f42b23b6d8. This change is not correct. GFP_DMA is not necessary for this device. There is some other problem causing this bug. Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index d5e38d1ea3a2..786a87483298 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1660,7 +1660,7 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) while (next_info->flags & ATL1C_BUFFER_FREE) { rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); - skb = __netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len, GFP_ATOMIC|GFP_DMA); + skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len); if (unlikely(!skb)) { if (netif_msg_rx_err(adapter)) dev_warn(&pdev->dev, "alloc rx buffer failed\n"); -- cgit v1.2.3 From c70a31750679ca10a46dd0cc2d57ed7b54dbe7c2 Mon Sep 17 00:00:00 2001 From: Jitendra Kalsaria Date: Fri, 26 Jul 2013 16:24:00 -0400 Subject: qlcnic: Fix initialization of work function. Work function needs to be initialized before we participate in inter device communication (IDC). Signed-off-by: Jitendra Kalsaria Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index f41dfab1e9a3..51ab4b56fc91 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -2123,6 +2123,8 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac) set_bit(QLC_83XX_MBX_READY, &adapter->ahw->idc.status); qlcnic_83xx_clear_function_resources(adapter); + INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work); + /* register for NIC IDC AEN Events */ qlcnic_83xx_register_nic_idc_func(adapter, 1); @@ -2140,8 +2142,6 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac) if (adapter->nic_ops->init_driver(adapter)) return -EIO; - INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work); - /* Periodically monitor device status */ qlcnic_83xx_idc_poll_dev_state(&adapter->fw_work.work); -- cgit v1.2.3 From 6226204bcf20d2bb8e47e996c1688186355c1db4 Mon Sep 17 00:00:00 2001 From: Pratik Pujar Date: Fri, 26 Jul 2013 16:24:01 -0400 Subject: qlcnic: Fix operation type and command type. Operation type and command type is not set correct in back channel response. Signed-off-by: Pratik Pujar Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 ++ drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 4 +--- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 62380ce89905..56e85f98117f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -762,6 +762,7 @@ static int qlcnic_sriov_alloc_bc_mbx_args(struct qlcnic_cmd_args *mbx, u32 type) memset(mbx->rsp.arg, 0, sizeof(u32) * mbx->rsp.num); mbx->req.arg[0] = (type | (mbx->req.num << 16) | (3 << 29)); + mbx->rsp.arg[0] = (type & 0xffff) | mbx->rsp.num << 16; return 0; } } @@ -813,6 +814,7 @@ static int qlcnic_sriov_prepare_bc_hdr(struct qlcnic_bc_trans *trans, cmd->req.num = trans->req_pay_size / 4; cmd->rsp.num = trans->rsp_pay_size / 4; hdr = trans->rsp_hdr; + cmd->op_type = trans->req_hdr->op_type; } trans->trans_id = seq; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 46aeb593fd52..9bdd51e6b44c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -641,8 +641,6 @@ static int qlcnic_sriov_pf_channel_cfg_cmd(struct qlcnic_bc_trans *trans, int err; adapter = vf->adapter; - cmd->rsp.arg[0] = trans->req_hdr->cmd_op; - cmd->rsp.arg[0] |= (1 << 16); if (trans->req_hdr->cmd_op == QLCNIC_BC_CMD_CHANNEL_INIT) { err = qlcnic_sriov_pf_config_vport(adapter, 1, func); @@ -1187,7 +1185,7 @@ static int qlcnic_sriov_pf_get_acl_cmd(struct qlcnic_bc_trans *trans, u8 cmd_op, mode = vp->vlan_mode; cmd_op = trans->req_hdr->cmd_op; - cmd->rsp.arg[0] = (cmd_op & 0xffff) | 14 << 16 | 1 << 25; + cmd->rsp.arg[0] |= 1 << 25; switch (mode) { case QLC_GUEST_VLAN_MODE: -- cgit v1.2.3 From 7cfc1cebdaee367c30e8944dd5adf2f6bbae8123 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Fri, 26 Jul 2013 16:24:02 -0400 Subject: qlcnic: Fix setting Guest VLAN o When configuring guest VLAN after PVID configuration, VF was loading with previously configured PVID. Clear the PVID which was previously configured before configuring guest VLAN. o Display guest VLAN when it is configured Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 9bdd51e6b44c..eb49cd65378c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -1749,6 +1749,7 @@ int qlcnic_sriov_set_vf_vlan(struct net_device *netdev, int vf, switch (vlan) { case 4095: + vp->vlan = 0; vp->vlan_mode = QLC_GUEST_VLAN_MODE; break; case 0: @@ -1767,6 +1768,29 @@ int qlcnic_sriov_set_vf_vlan(struct net_device *netdev, int vf, return 0; } +static inline __u32 qlcnic_sriov_get_vf_vlan(struct qlcnic_adapter *adapter, + struct qlcnic_vport *vp, int vf) +{ + __u32 vlan = 0; + + switch (vp->vlan_mode) { + case QLC_PVID_MODE: + vlan = vp->vlan; + break; + case QLC_GUEST_VLAN_MODE: + vlan = MAX_VLAN_ID; + break; + case QLC_NO_VLAN_MODE: + vlan = 0; + break; + default: + netdev_info(adapter->netdev, "Invalid VLAN mode = %d for VF %d\n", + vp->vlan_mode, vf); + } + + return vlan; +} + int qlcnic_sriov_get_vf_config(struct net_device *netdev, int vf, struct ifla_vf_info *ivi) { @@ -1782,7 +1806,7 @@ int qlcnic_sriov_get_vf_config(struct net_device *netdev, vp = sriov->vf_info[vf].vp; memcpy(&ivi->mac, vp->mac, ETH_ALEN); - ivi->vlan = vp->vlan; + ivi->vlan = qlcnic_sriov_get_vf_vlan(adapter, vp, vf); ivi->qos = vp->qos; ivi->spoofchk = vp->spoofchk; if (vp->max_tx_bw == MAX_BW) -- cgit v1.2.3 From c2534384233647a8702eca291199b94ffedc12d3 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Fri, 26 Jul 2013 16:24:03 -0400 Subject: qlcnic: Fix diagnostic interrupt test for 83xx adapters. o Initialize proper interrupt handler for 83xx. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 41635f2b9399..cc78d3924c6a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1383,6 +1383,8 @@ qlcnic_request_irq(struct qlcnic_adapter *adapter) if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { if (qlcnic_82xx_check(adapter)) handler = qlcnic_tmp_intr; + else + handler = qlcnic_83xx_tmp_intr; if (!QLCNIC_IS_MSI_FAMILY(adapter)) flags |= IRQF_SHARED; -- cgit v1.2.3 From 031916568a1aa2ef1809f86d26f0bcfa215ff5c0 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Thu, 25 Jul 2013 14:05:53 +0800 Subject: net: fec: workaround stop tx during errata ERR006358 If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously detected as not set during a prior frame transmission, then the ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in frames not being transmitted until there is a 0-to-1 transition on ENET_TDAR[TDAR]. Workarounds: code can use the transmit frame interrupt flag (ENET_EIR[TXF]) as a method to detect whether the ENET has completed transmission and the ENET_TDAR[TDAR] has been cleared. If ENET_TDAR[TDAR] is detected as cleared when packets are queued and waiting for transmit, then a write to the TDAR bit will restart TxBD processing. This case main happen when loading is light. A ethernet package may not send out utile next package put into tx queue. How to test: while [ true ] do ping -s 10000 -w 4 ping -s 6000 -w 2 ping -s 4000 -w 2 ping -s 10000 -w 2 done You will see below result in overnight test. 6008 bytes from 10.192.242.116: seq=1 ttl=128 time=0.722 ms 4008 bytes from 10.192.242.116: seq=0 ttl=128 time=1001.008 ms 4008 bytes from 10.192.242.116: seq=1 ttl=128 time=1.010 ms 10008 bytes from 10.192.242.116: seq=0 ttl=128 time=0.896 ms After apply this patch, >1000ms delay disappear. Signed-off-by: Frank Li Acked-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec.h | 1 + drivers/net/ethernet/freescale/fec_main.c | 32 +++++++++++++++++++++++++++++-- 2 files changed, 31 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h index 2b0a0ea4f8e7..ae236009f1a8 100644 --- a/drivers/net/ethernet/freescale/fec.h +++ b/drivers/net/ethernet/freescale/fec.h @@ -259,6 +259,7 @@ struct bufdesc_ex { struct fec_enet_delayed_work { struct delayed_work delay_work; bool timeout; + bool trig_tx; }; /* The FEC buffer descriptors track the ring buffers. The rx_bd_base and diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index f0f0e96453a0..0dda45481d16 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -93,6 +93,20 @@ static void set_multicast_list(struct net_device *ndev); #define FEC_QUIRK_HAS_CSUM (1 << 5) /* Controller has hardware vlan support */ #define FEC_QUIRK_HAS_VLAN (1 << 6) +/* ENET IP errata ERR006358 + * + * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously + * detected as not set during a prior frame transmission, then the + * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs + * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in + * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously + * detected as not set during a prior frame transmission, then the + * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs + * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in + * frames not being transmitted until there is a 0-to-1 transition on + * ENET_TDAR[TDAR]. + */ +#define FEC_QUIRK_ERR006358 (1 << 7) static struct platform_device_id fec_devtype[] = { { @@ -112,7 +126,7 @@ static struct platform_device_id fec_devtype[] = { .name = "imx6q-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM | - FEC_QUIRK_HAS_VLAN, + FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358, }, { .name = "mvf600-fec", .driver_data = FEC_QUIRK_ENET_MAC, @@ -275,7 +289,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); const struct platform_device_id *id_entry = platform_get_device_id(fep->pdev); - struct bufdesc *bdp; + struct bufdesc *bdp, *bdp_pre; void *bufaddr; unsigned short status; unsigned int index; @@ -370,6 +384,15 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) ebdp->cbd_esc |= BD_ENET_TX_PINS; } } + + bdp_pre = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); + if ((id_entry->driver_data & FEC_QUIRK_ERR006358) && + !(bdp_pre->cbd_sc & BD_ENET_TX_READY)) { + fep->delay_work.trig_tx = true; + schedule_delayed_work(&(fep->delay_work.delay_work), + msecs_to_jiffies(1)); + } + /* If this was the last BD in the ring, start at the beginning again. */ if (status & BD_ENET_TX_WRAP) bdp = fep->tx_bd_base; @@ -689,6 +712,11 @@ static void fec_enet_work(struct work_struct *work) fec_restart(fep->netdev, fep->full_duplex); netif_wake_queue(fep->netdev); } + + if (fep->delay_work.trig_tx) { + fep->delay_work.trig_tx = false; + writel(0, fep->hwp + FEC_X_DES_ACTIVE); + } } static void -- cgit v1.2.3 From 1eb9ac14c34a948bf1538bfb9034e8ab29099a64 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 26 Jul 2013 05:46:35 -0700 Subject: ixgbe: Fix Tx Hang issue with lldpad on 82598EB This patch fixes an issue with the 82598EB device, where lldpad is causing Tx Hangs on the card as soon as it attempts to configure DCB for the device. The adapter will continually Tx hang and reset in a loop. Signed-off-by: Jacob Keller Cc: Stable Tested-by: Phil Schmitt Tested-by: Jack Morgan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c index ac780770863d..7a77f37a7cbc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c @@ -108,9 +108,8 @@ s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw, /* Enable arbiter */ reg &= ~IXGBE_DPMCS_ARBDIS; - /* Enable DFP and Recycle mode */ - reg |= (IXGBE_DPMCS_TDPAC | IXGBE_DPMCS_TRM); reg |= IXGBE_DPMCS_TSOEF; + /* Configure Max TSO packet size 34KB including payload and headers */ reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT); -- cgit v1.2.3 From 7e44892c1b6bb499cb2f6d5c0f4afcc077a26074 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 26 Jul 2013 05:46:36 -0700 Subject: igb: fix vlan filtering in promisc mode when not in VT mode This patch fixes a VT mode check to make sure VLAN filters are disabled when in promisc mode and VT is not enabled. The problem with the previous check was that: E1000_MRQC_ENABLE_VMDQ is defined as 0x00000003 but when not in VT mode: mrqc |= E1000_MRQC_ENABLE_RSS_4Q (0x00000002) So the above check will trigger regardless if VT mode is being used or not. Signed-off-by: Emil Tantilov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 6a0c1b66ce54..c1d72c03cb59 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3739,9 +3739,8 @@ static void igb_set_rx_mode(struct net_device *netdev) rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); if (netdev->flags & IFF_PROMISC) { - u32 mrqc = rd32(E1000_MRQC); /* retain VLAN HW filtering if in VT mode */ - if (mrqc & E1000_MRQC_ENABLE_VMDQ) + if (adapter->vfs_allocated_count) rctl |= E1000_RCTL_VFE; rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); -- cgit v1.2.3 From e2288b66fe7ff0288382b2af671b4da558b44472 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sun, 28 Jul 2013 13:17:22 +0200 Subject: rt2x00: fix stop queue Since we clear QUEUE_STARTED in rt2x00queue_stop_queue(), following call to rt2x00queue_pause_queue() reduce to noop, i.e we do not stop queue in mac80211. To fix that introduce rt2x00queue_pause_queue_nocheck() function, which will stop queue in mac80211 directly. Note that rt2x00_start_queue() explicitly set QUEUE_PAUSED bit. Note also that reordering operations i.e. first call to rt2x00queue_pause_queue() and then clear QUEUE_STARTED bit, will race with rt2x00queue_unpause_queue(), so calling ieee80211_stop_queue() directly is the only available solution to fix the problem without major rework. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 6c0a91ff963c..aa95c6cf3545 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -936,13 +936,8 @@ void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index) spin_unlock_irqrestore(&queue->index_lock, irqflags); } -void rt2x00queue_pause_queue(struct data_queue *queue) +void rt2x00queue_pause_queue_nocheck(struct data_queue *queue) { - if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || - !test_bit(QUEUE_STARTED, &queue->flags) || - test_and_set_bit(QUEUE_PAUSED, &queue->flags)) - return; - switch (queue->qid) { case QID_AC_VO: case QID_AC_VI: @@ -958,6 +953,15 @@ void rt2x00queue_pause_queue(struct data_queue *queue) break; } } +void rt2x00queue_pause_queue(struct data_queue *queue) +{ + if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) || + !test_bit(QUEUE_STARTED, &queue->flags) || + test_and_set_bit(QUEUE_PAUSED, &queue->flags)) + return; + + rt2x00queue_pause_queue_nocheck(queue); +} EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue); void rt2x00queue_unpause_queue(struct data_queue *queue) @@ -1019,7 +1023,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue) return; } - rt2x00queue_pause_queue(queue); + rt2x00queue_pause_queue_nocheck(queue); queue->rt2x00dev->ops->lib->stop_queue(queue); -- cgit v1.2.3 From a264b981f2c76e281ef27e7232774bf6c54ec865 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 30 Jul 2013 11:29:40 +0200 Subject: net/fec: Don't let ndo_start_xmit return NETDEV_TX_BUSY without link MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Don't test for having link and let hardware deal with this situation. Without this patch I see a machine running an -rt patched Linux being stuck in sch_direct_xmit when it looses link while there is still a packet to be sent. In this case the fec_enet_start_xmit routine returned NETDEV_TX_BUSY which makes the network stack reschedule the packet and so sch_direct_xmit calls fec_enet_start_xmit again. I failed to reproduce a complete hang without -rt, but I think the problem exists there, too. Signed-off-by: Uwe Kleine-König Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 0dda45481d16..77ea0db0bbfc 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -294,11 +294,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) unsigned short status; unsigned int index; - if (!fep->link) { - /* Link is down or auto-negotiation is in progress. */ - return NETDEV_TX_BUSY; - } - /* Fill in a Tx ring entry */ bdp = fep->cur_tx; -- cgit v1.2.3 From 7b70176421993866e616f1cbc4d0dd4054f1bf78 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 29 Jul 2013 10:24:04 -0700 Subject: atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring On Mon, 2013-07-29 at 08:30 -0700, Eric Dumazet wrote: > On Mon, 2013-07-29 at 13:09 +0100, Luis Henriques wrote: > > > > > I confirm that I can't reproduce the issue using this patch. > > > > Thanks, I'll send a polished patch, as this one had an error if > build_skb() returns NULL (in case sk_buff allocation fails) Please try the following patch : It should use 2K frags instead of 4K for normal 1500 mtu Thanks ! [PATCH] atl1c: use custom skb allocator We had reports ( https://bugzilla.kernel.org/show_bug.cgi?id=54021 ) that using high order pages for skb allocations is problematic for atl1c We do not know exactly what the problem is, but we suspect that crossing 4K pages is not well supported by this hardware. Use a custom allocator, using page allocator and 2K fragments for optimal stack behavior. We might make this allocator generic in future kernels. Signed-off-by: Eric Dumazet Cc: Luis Henriques Cc: Neil Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c.h | 3 ++ drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 40 ++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c.h b/drivers/net/ethernet/atheros/atl1c/atl1c.h index b2bf324631dc..0f0556526ba9 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c.h @@ -520,6 +520,9 @@ struct atl1c_adapter { struct net_device *netdev; struct pci_dev *pdev; struct napi_struct napi; + struct page *rx_page; + unsigned int rx_page_offset; + unsigned int rx_frag_size; struct atl1c_hw hw; struct atl1c_hw_stats hw_stats; struct mii_if_info mii; /* MII interface info */ diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 786a87483298..a36a760ada28 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -481,10 +481,15 @@ static int atl1c_set_mac_addr(struct net_device *netdev, void *p) static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter, struct net_device *dev) { + unsigned int head_size; int mtu = dev->mtu; adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ? roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE; + + head_size = SKB_DATA_ALIGN(adapter->rx_buffer_len + NET_SKB_PAD) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + adapter->rx_frag_size = roundup_pow_of_two(head_size); } static netdev_features_t atl1c_fix_features(struct net_device *netdev, @@ -952,6 +957,10 @@ static void atl1c_free_ring_resources(struct atl1c_adapter *adapter) kfree(adapter->tpd_ring[0].buffer_info); adapter->tpd_ring[0].buffer_info = NULL; } + if (adapter->rx_page) { + put_page(adapter->rx_page); + adapter->rx_page = NULL; + } } /** @@ -1639,6 +1648,35 @@ static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter, skb_checksum_none_assert(skb); } +static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter) +{ + struct sk_buff *skb; + struct page *page; + + if (adapter->rx_frag_size > PAGE_SIZE) + return netdev_alloc_skb(adapter->netdev, + adapter->rx_buffer_len); + + page = adapter->rx_page; + if (!page) { + adapter->rx_page = page = alloc_page(GFP_ATOMIC); + if (unlikely(!page)) + return NULL; + adapter->rx_page_offset = 0; + } + + skb = build_skb(page_address(page) + adapter->rx_page_offset, + adapter->rx_frag_size); + if (likely(skb)) { + adapter->rx_page_offset += adapter->rx_frag_size; + if (adapter->rx_page_offset >= PAGE_SIZE) + adapter->rx_page = NULL; + else + get_page(page); + } + return skb; +} + static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) { struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring; @@ -1660,7 +1698,7 @@ static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter) while (next_info->flags & ATL1C_BUFFER_FREE) { rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use); - skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len); + skb = atl1c_alloc_skb(adapter); if (unlikely(!skb)) { if (netif_msg_rx_err(adapter)) dev_warn(&pdev->dev, "alloc rx buffer failed\n"); -- cgit v1.2.3 From aded09555b7a0748a692d0d644ac54c10c1c0757 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard \\(Rtp\\)" Date: Mon, 29 Jul 2013 21:56:47 +0200 Subject: mvneta: Fix hang when loading the mvneta driver When the mvneta driver is compiled, it'll be loaded with clocks disabled. This implies that the clocks should be enabled again before any register access or it'll hang. To fix it: - enable clock earlier - move timer callback after setting timer.data Signed-off-by: Arnaud Patard Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 712779fb12b7..3ac29c64bd6c 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2728,20 +2728,10 @@ static int mvneta_probe(struct platform_device *pdev) pp = netdev_priv(dev); - pp->tx_done_timer.function = mvneta_tx_done_timer_callback; - init_timer(&pp->tx_done_timer); - clear_bit(MVNETA_F_TX_DONE_TIMER_BIT, &pp->flags); - pp->weight = MVNETA_RX_POLL_WEIGHT; pp->phy_node = phy_node; pp->phy_interface = phy_mode; - pp->base = of_iomap(dn, 0); - if (pp->base == NULL) { - err = -ENOMEM; - goto err_free_irq; - } - pp->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pp->clk)) { err = PTR_ERR(pp->clk); @@ -2765,7 +2755,16 @@ static int mvneta_probe(struct platform_device *pdev) } } + pp->base = of_iomap(dn, 0); + if (pp->base == NULL) { + err = -ENOMEM; + goto err_free_irq; + } + pp->tx_done_timer.data = (unsigned long)dev; + pp->tx_done_timer.function = mvneta_tx_done_timer_callback; + init_timer(&pp->tx_done_timer); + clear_bit(MVNETA_F_TX_DONE_TIMER_BIT, &pp->flags); pp->tx_ring_size = MVNETA_MAX_TXD; pp->rx_ring_size = MVNETA_MAX_RXD; -- cgit v1.2.3 From 5445eaf309ff2868c77354016505fc7315947a35 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard \\(Rtp\\)" Date: Mon, 29 Jul 2013 21:56:48 +0200 Subject: mvneta: Try to fix mvneta when compiled as module When the mvneta driver is compiled as module, the clock is disabled before it's loading. This will reset the registers values and all configuration made by the bootloader. This patch sets the "sgmii serdes configuration" register to a magical value found in: https://github.com/yellowback/ubuntu-precise-armadaxp/blob/master/arch/arm/mach-armadaxp/armada_xp_family/ctrlEnv/mvCtrlEnvLib.c With this change, the interrupts are working/generated and ethernet is working. Signed-off-by: Arnaud Patard Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvneta.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 3ac29c64bd6c..b017818bccae 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -88,6 +88,8 @@ #define MVNETA_TX_IN_PRGRS BIT(1) #define MVNETA_TX_FIFO_EMPTY BIT(8) #define MVNETA_RX_MIN_FRAME_SIZE 0x247c +#define MVNETA_SGMII_SERDES_CFG 0x24A0 +#define MVNETA_SGMII_SERDES_PROTO 0x0cc7 #define MVNETA_TYPE_PRIO 0x24bc #define MVNETA_FORCE_UNI BIT(21) #define MVNETA_TXQ_CMD_1 0x24e4 @@ -655,6 +657,8 @@ static void mvneta_port_sgmii_config(struct mvneta_port *pp) val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); val |= MVNETA_GMAC2_PSC_ENABLE; mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); + + mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); } /* Start the Ethernet port RX and TX activity */ @@ -2735,11 +2739,17 @@ static int mvneta_probe(struct platform_device *pdev) pp->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pp->clk)) { err = PTR_ERR(pp->clk); - goto err_unmap; + goto err_free_irq; } clk_prepare_enable(pp->clk); + pp->base = of_iomap(dn, 0); + if (pp->base == NULL) { + err = -ENOMEM; + goto err_clk; + } + dt_mac_addr = of_get_mac_address(dn); if (dt_mac_addr && is_valid_ether_addr(dt_mac_addr)) { mac_from = "device tree"; @@ -2755,12 +2765,6 @@ static int mvneta_probe(struct platform_device *pdev) } } - pp->base = of_iomap(dn, 0); - if (pp->base == NULL) { - err = -ENOMEM; - goto err_free_irq; - } - pp->tx_done_timer.data = (unsigned long)dev; pp->tx_done_timer.function = mvneta_tx_done_timer_callback; init_timer(&pp->tx_done_timer); @@ -2775,7 +2779,7 @@ static int mvneta_probe(struct platform_device *pdev) err = mvneta_init(pp, phy_addr); if (err < 0) { dev_err(&pdev->dev, "can't init eth hal\n"); - goto err_clk; + goto err_unmap; } mvneta_port_power_up(pp, phy_mode); @@ -2805,10 +2809,10 @@ static int mvneta_probe(struct platform_device *pdev) err_deinit: mvneta_deinit(pp); -err_clk: - clk_disable_unprepare(pp->clk); err_unmap: iounmap(pp->base); +err_clk: + clk_disable_unprepare(pp->clk); err_free_irq: irq_dispose_mapping(dev->irq); err_free_netdev: -- cgit v1.2.3 From a661b43fd047ef501da43a19975415f861c7c3db Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 30 Jul 2013 07:57:06 +0800 Subject: mlx5: fix error return code in mlx5_alloc_uuars() Fix to return -ENOMEM from the ioremap error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/uar.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/uar.c b/drivers/net/ethernet/mellanox/mlx5/core/uar.c index 71d4a3937200..68f5d9c77c7b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/uar.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/uar.c @@ -164,6 +164,7 @@ int mlx5_alloc_uuars(struct mlx5_core_dev *dev, struct mlx5_uuar_info *uuari) uuari->uars[i].map = ioremap(addr, PAGE_SIZE); if (!uuari->uars[i].map) { mlx5_cmd_free_uar(dev, uuari->uars[i].index); + err = -ENOMEM; goto out_count; } mlx5_core_dbg(dev, "allocated uar index 0x%x, mmaped at %p\n", -- cgit v1.2.3 From 953b3539ef9301b8ef73f4b6e2fd824b86aae65a Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 29 Jul 2013 16:32:37 -0700 Subject: mwifiex: check for bss_role instead of bss_mode for STA operations This patch fixes an issue wherein association would fail on P2P interfaces. This happened because we are checking priv->mode against NL80211_IFTYPE_STATION. While this check is correct for infrastructure stations, it would fail P2P clients for which mode is NL80211_IFTYPE_P2P_CLIENT. Better check would be bss_role which has only 2 values: STA/AP. Cc: # 3.10.y Signed-off-by: Avinash Patil Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 4 ++-- drivers/net/wireless/mwifiex/join.c | 6 ++++-- 2 files changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index ef5fa890a286..89459db4c53b 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1716,9 +1716,9 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); int ret; - if (priv->bss_mode != NL80211_IFTYPE_STATION) { + if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) { wiphy_err(wiphy, - "%s: reject infra assoc request in non-STA mode\n", + "%s: reject infra assoc request in non-STA role\n", dev->name); return -EINVAL; } diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 1c8a771e8e81..12e778159ec5 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -1291,8 +1291,10 @@ int mwifiex_associate(struct mwifiex_private *priv, { u8 current_bssid[ETH_ALEN]; - /* Return error if the adapter or table entry is not marked as infra */ - if ((priv->bss_mode != NL80211_IFTYPE_STATION) || + /* Return error if the adapter is not STA role or table entry + * is not marked as infra. + */ + if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) || (bss_desc->bss_mode != NL80211_IFTYPE_STATION)) return -1; -- cgit v1.2.3 From 237b2ac8ac89a6b0120decdd05c7bf4637deb98a Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 29 Jul 2013 16:32:38 -0700 Subject: mwifiex: fix wrong data rates in P2P client This patch fixes an issue wherein adhoc rates were being copied into association request from P2P client. Cc: # 3.10.y Signed-off-by: Avinash Patil Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c index 988552dece75..5178c4630d89 100644 --- a/drivers/net/wireless/mwifiex/cfp.c +++ b/drivers/net/wireless/mwifiex/cfp.c @@ -415,7 +415,8 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) u32 k = 0; struct mwifiex_adapter *adapter = priv->adapter; - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { switch (adapter->config_bands) { case BAND_B: dev_dbg(adapter->dev, "info: infra band=%d " -- cgit v1.2.3 From 6621fe18cdce50df9c3954f878183321dfe3078c Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Mon, 29 Jul 2013 16:32:39 -0700 Subject: mwifiex: fix command 0x2c timeout during p2p_find or p2p_connect We missed bss_mode check for P2P client. Signed-off-by: Stone Piao Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sta_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 206c3e038072..8af97abf7108 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -257,10 +257,10 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, goto done; } - if (priv->bss_mode == NL80211_IFTYPE_STATION) { + if (priv->bss_mode == NL80211_IFTYPE_STATION || + priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) { u8 config_bands; - /* Infra mode */ ret = mwifiex_deauthenticate(priv, NULL); if (ret) goto done; -- cgit v1.2.3 From 11940c8728b8e4bd67d0afacefbb9391ff8f4201 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 22 Jul 2013 11:02:01 +0300 Subject: mlx5_core: Fix use after free in mlx5_cmd_comp_handler() We can't dereference "ent" after passing it to free_cmd(). Signed-off-by: Dan Carpenter Acked-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 205753a04cfc..40374063c01e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1113,7 +1113,13 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, unsigned long vector) for (i = 0; i < (1 << cmd->log_sz); i++) { if (test_bit(i, &vector)) { + struct semaphore *sem; + ent = cmd->ent_arr[i]; + if (ent->page_queue) + sem = &cmd->pages_sem; + else + sem = &cmd->sem; ktime_get_ts(&ent->ts2); memcpy(ent->out->first.data, ent->lay->out, sizeof(ent->lay->out)); dump_command(dev, ent, 0); @@ -1136,10 +1142,7 @@ void mlx5_cmd_comp_handler(struct mlx5_core_dev *dev, unsigned long vector) } else { complete(&ent->done); } - if (ent->page_queue) - up(&cmd->pages_sem); - else - up(&cmd->sem); + up(sem); } } } -- cgit v1.2.3 From cd23b14b654769db83c9684ae1ba32c0e066670f Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 18 Jul 2013 15:31:08 +0300 Subject: mlx5_core: Implement new initialization sequence Introduce enbale_hca and disable_hca commands to signify when the driver starts or ceases to operate on the device. In addition the driver will use boot and init pages count; boot pages is required to allow firmware to complete boot commands and the other to complete init hca. Command interface revision is bumped to 4 to enforce using supported firmware. This patch breaks compatibility with old versions of firmware (< 4); however, the first GA firmware we will publish will support version 4 so this should not be a problem. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 8 ++- drivers/net/ethernet/mellanox/mlx5/core/main.c | 69 +++++++++++++++++++--- .../net/ethernet/mellanox/mlx5/core/pagealloc.c | 20 +++++-- include/linux/mlx5/device.h | 20 +++++++ include/linux/mlx5/driver.h | 4 +- 5 files changed, 106 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index 40374063c01e..c571de85d0f9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -46,7 +46,7 @@ #include "mlx5_core.h" enum { - CMD_IF_REV = 3, + CMD_IF_REV = 4, }; enum { @@ -282,6 +282,12 @@ const char *mlx5_command_str(int command) case MLX5_CMD_OP_TEARDOWN_HCA: return "TEARDOWN_HCA"; + case MLX5_CMD_OP_ENABLE_HCA: + return "MLX5_CMD_OP_ENABLE_HCA"; + + case MLX5_CMD_OP_DISABLE_HCA: + return "MLX5_CMD_OP_DISABLE_HCA"; + case MLX5_CMD_OP_QUERY_PAGES: return "QUERY_PAGES"; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 12242de2b0e3..b47739b0b5f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -249,6 +249,44 @@ static int set_hca_ctrl(struct mlx5_core_dev *dev) return err; } +static int mlx5_core_enable_hca(struct mlx5_core_dev *dev) +{ + int err; + struct mlx5_enable_hca_mbox_in in; + struct mlx5_enable_hca_mbox_out out; + + memset(&in, 0, sizeof(in)); + memset(&out, 0, sizeof(out)); + in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_ENABLE_HCA); + err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out)); + if (err) + return err; + + if (out.hdr.status) + return mlx5_cmd_status_to_err(&out.hdr); + + return 0; +} + +static int mlx5_core_disable_hca(struct mlx5_core_dev *dev) +{ + int err; + struct mlx5_disable_hca_mbox_in in; + struct mlx5_disable_hca_mbox_out out; + + memset(&in, 0, sizeof(in)); + memset(&out, 0, sizeof(out)); + in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_DISABLE_HCA); + err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out)); + if (err) + return err; + + if (out.hdr.status) + return mlx5_cmd_status_to_err(&out.hdr); + + return 0; +} + int mlx5_dev_init(struct mlx5_core_dev *dev, struct pci_dev *pdev) { struct mlx5_priv *priv = &dev->priv; @@ -304,28 +342,41 @@ int mlx5_dev_init(struct mlx5_core_dev *dev, struct pci_dev *pdev) } mlx5_pagealloc_init(dev); + + err = mlx5_core_enable_hca(dev); + if (err) { + dev_err(&pdev->dev, "enable hca failed\n"); + goto err_pagealloc_cleanup; + } + + err = mlx5_satisfy_startup_pages(dev, 1); + if (err) { + dev_err(&pdev->dev, "failed to allocate boot pages\n"); + goto err_disable_hca; + } + err = set_hca_ctrl(dev); if (err) { dev_err(&pdev->dev, "set_hca_ctrl failed\n"); - goto err_pagealloc_cleanup; + goto reclaim_boot_pages; } err = handle_hca_cap(dev); if (err) { dev_err(&pdev->dev, "handle_hca_cap failed\n"); - goto err_pagealloc_cleanup; + goto reclaim_boot_pages; } - err = mlx5_satisfy_startup_pages(dev); + err = mlx5_satisfy_startup_pages(dev, 0); if (err) { - dev_err(&pdev->dev, "failed to allocate startup pages\n"); - goto err_pagealloc_cleanup; + dev_err(&pdev->dev, "failed to allocate init pages\n"); + goto reclaim_boot_pages; } err = mlx5_pagealloc_start(dev); if (err) { dev_err(&pdev->dev, "mlx5_pagealloc_start failed\n"); - goto err_reclaim_pages; + goto reclaim_boot_pages; } err = mlx5_cmd_init_hca(dev); @@ -396,9 +447,12 @@ err_stop_poll: err_pagealloc_stop: mlx5_pagealloc_stop(dev); -err_reclaim_pages: +reclaim_boot_pages: mlx5_reclaim_startup_pages(dev); +err_disable_hca: + mlx5_core_disable_hca(dev); + err_pagealloc_cleanup: mlx5_pagealloc_cleanup(dev); mlx5_cmd_cleanup(dev); @@ -434,6 +488,7 @@ void mlx5_dev_cleanup(struct mlx5_core_dev *dev) mlx5_cmd_teardown_hca(dev); mlx5_pagealloc_stop(dev); mlx5_reclaim_startup_pages(dev); + mlx5_core_disable_hca(dev); mlx5_pagealloc_cleanup(dev); mlx5_cmd_cleanup(dev); iounmap(dev->iseg); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c index f0bf46339b28..4a3e137931a3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c @@ -64,7 +64,7 @@ struct mlx5_query_pages_inbox { struct mlx5_query_pages_outbox { struct mlx5_outbox_hdr hdr; - u8 reserved[2]; + __be16 num_boot_pages; __be16 func_id; __be16 init_pages; __be16 num_pages; @@ -146,7 +146,7 @@ static struct page *remove_page(struct mlx5_core_dev *dev, u64 addr) } static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id, - s16 *pages, s16 *init_pages) + s16 *pages, s16 *init_pages, u16 *boot_pages) { struct mlx5_query_pages_inbox in; struct mlx5_query_pages_outbox out; @@ -164,8 +164,13 @@ static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id, if (pages) *pages = be16_to_cpu(out.num_pages); + if (init_pages) *init_pages = be16_to_cpu(out.init_pages); + + if (boot_pages) + *boot_pages = be16_to_cpu(out.num_boot_pages); + *func_id = be16_to_cpu(out.func_id); return err; @@ -357,19 +362,22 @@ void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, queue_work(dev->priv.pg_wq, &req->work); } -int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev) +int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev, int boot) { + u16 uninitialized_var(boot_pages); s16 uninitialized_var(init_pages); u16 uninitialized_var(func_id); int err; - err = mlx5_cmd_query_pages(dev, &func_id, NULL, &init_pages); + err = mlx5_cmd_query_pages(dev, &func_id, NULL, &init_pages, + &boot_pages); if (err) return err; - mlx5_core_dbg(dev, "requested %d init pages for func_id 0x%x\n", init_pages, func_id); - return give_pages(dev, func_id, init_pages, 0); + mlx5_core_dbg(dev, "requested %d init pages and %d boot pages for func_id 0x%x\n", + init_pages, boot_pages, func_id); + return give_pages(dev, func_id, boot ? boot_pages : init_pages, 0); } static int optimal_reclaimed_pages(void) diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 8de8d8f22384..737685e9e852 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -690,6 +690,26 @@ struct mlx5_query_cq_mbox_out { __be64 pas[0]; }; +struct mlx5_enable_hca_mbox_in { + struct mlx5_inbox_hdr hdr; + u8 rsvd[8]; +}; + +struct mlx5_enable_hca_mbox_out { + struct mlx5_outbox_hdr hdr; + u8 rsvd[8]; +}; + +struct mlx5_disable_hca_mbox_in { + struct mlx5_inbox_hdr hdr; + u8 rsvd[8]; +}; + +struct mlx5_disable_hca_mbox_out { + struct mlx5_outbox_hdr hdr; + u8 rsvd[8]; +}; + struct mlx5_eq_context { u8 status; u8 ec_oi; diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index f22e4419839b..2aa258b0ced1 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -101,6 +101,8 @@ enum { MLX5_CMD_OP_QUERY_ADAPTER = 0x101, MLX5_CMD_OP_INIT_HCA = 0x102, MLX5_CMD_OP_TEARDOWN_HCA = 0x103, + MLX5_CMD_OP_ENABLE_HCA = 0x104, + MLX5_CMD_OP_DISABLE_HCA = 0x105, MLX5_CMD_OP_QUERY_PAGES = 0x107, MLX5_CMD_OP_MANAGE_PAGES = 0x108, MLX5_CMD_OP_SET_HCA_CAP = 0x109, @@ -690,7 +692,7 @@ int mlx5_pagealloc_start(struct mlx5_core_dev *dev); void mlx5_pagealloc_stop(struct mlx5_core_dev *dev); void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, s16 npages); -int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev); +int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev, int boot); int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev); void mlx5_register_debugfs(void); void mlx5_unregister_debugfs(void); -- cgit v1.2.3 From b2f47377e871a5f3cc5bd0dd58d3ea1fbc58948d Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 31 Jul 2013 17:21:22 +0800 Subject: net/usb/r815x: replace USB buffer from stack to DMA-able Some USB buffers use stack which may not be DMA-able. Use the buffers from kmalloc to replace those one. Signed-off-by: Hayes Wang Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/r815x.c | 44 +++++++++++++++++++++++++++----------------- 1 file changed, 27 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c index 852392269718..e9b99bad02a7 100644 --- a/drivers/net/usb/r815x.c +++ b/drivers/net/usb/r815x.c @@ -24,34 +24,43 @@ static int pla_read_word(struct usb_device *udev, u16 index) { - int data, ret; + int ret; u8 shift = index & 2; - __le32 ocp_data; + __le32 *tmp; + + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; index &= ~3; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, - index, MCU_TYPE_PLA, &ocp_data, sizeof(ocp_data), - 500); + index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500); if (ret < 0) - return ret; + goto out2; - data = __le32_to_cpu(ocp_data); - data >>= (shift * 8); - data &= 0xffff; + ret = __le32_to_cpu(*tmp); + ret >>= (shift * 8); + ret &= 0xffff; - return data; +out2: + kfree(tmp); + return ret; } static int pla_write_word(struct usb_device *udev, u16 index, u32 data) { - __le32 ocp_data; + __le32 *tmp; u32 mask = 0xffff; u16 byen = BYTE_EN_WORD; u8 shift = index & 2; int ret; + tmp = kmalloc(sizeof(*tmp), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + data &= mask; if (shift) { @@ -63,19 +72,20 @@ static int pla_write_word(struct usb_device *udev, u16 index, u32 data) ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL815x_REQ_GET_REGS, RTL815x_REQT_READ, - index, MCU_TYPE_PLA, &ocp_data, sizeof(ocp_data), - 500); + index, MCU_TYPE_PLA, tmp, sizeof(*tmp), 500); if (ret < 0) - return ret; + goto out3; - data |= __le32_to_cpu(ocp_data) & ~mask; - ocp_data = __cpu_to_le32(data); + data |= __le32_to_cpu(*tmp) & ~mask; + *tmp = __cpu_to_le32(data); ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL815x_REQ_SET_REGS, RTL815x_REQT_WRITE, - index, MCU_TYPE_PLA | byen, &ocp_data, - sizeof(ocp_data), 500); + index, MCU_TYPE_PLA | byen, tmp, sizeof(*tmp), + 500); +out3: + kfree(tmp); return ret; } -- cgit v1.2.3 From b771721a748875e3654debdf68ad4708477f18c4 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 31 Jul 2013 17:21:23 +0800 Subject: net/usb/r815x: avoid to call mdio functions for runtime-suspended device Don't replace the usb_control_msg() with usbnet_{read,write}_cmd() which couldn't be called inside suspend/resume callback. Keep the basic functions unlimited. Instead, using usb_autopm_get_interface() and usb_autopm_put_interface() in r815x_mdio_{read,write}(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r815x.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c index e9b99bad02a7..1a80e76ce0b9 100644 --- a/drivers/net/usb/r815x.c +++ b/drivers/net/usb/r815x.c @@ -126,11 +126,18 @@ out1: static int r815x_mdio_read(struct net_device *netdev, int phy_id, int reg) { struct usbnet *dev = netdev_priv(netdev); + int ret; if (phy_id != R815x_PHY_ID) return -EINVAL; - return ocp_reg_read(dev, BASE_MII + reg * 2); + if (usb_autopm_get_interface(dev->intf) < 0) + return -ENODEV; + + ret = ocp_reg_read(dev, BASE_MII + reg * 2); + + usb_autopm_put_interface(dev->intf); + return ret; } static @@ -141,7 +148,12 @@ void r815x_mdio_write(struct net_device *netdev, int phy_id, int reg, int val) if (phy_id != R815x_PHY_ID) return; + if (usb_autopm_get_interface(dev->intf) < 0) + return; + ocp_reg_write(dev, BASE_MII + reg * 2, val); + + usb_autopm_put_interface(dev->intf); } static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) -- cgit v1.2.3 From 543ae7f9c4e69816043ac3b526310353b413b325 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 31 Jul 2013 17:21:24 +0800 Subject: net/usb/r815x: change the return value for bind functions Replace 0 with the result from usbnet_cdc_bind(). Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r815x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r815x.c b/drivers/net/usb/r815x.c index 1a80e76ce0b9..2df2f4fb42a7 100644 --- a/drivers/net/usb/r815x.c +++ b/drivers/net/usb/r815x.c @@ -172,7 +172,7 @@ static int r8153_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.phy_id = R815x_PHY_ID; dev->mii.supports_gmii = 1; - return 0; + return status; } static int r8152_bind(struct usbnet *dev, struct usb_interface *intf) @@ -191,7 +191,7 @@ static int r8152_bind(struct usbnet *dev, struct usb_interface *intf) dev->mii.phy_id = R815x_PHY_ID; dev->mii.supports_gmii = 0; - return 0; + return status; } static const struct driver_info r8152_info = { -- cgit v1.2.3 From 31787f5398c3c5aced755e8abd5ae00a2c371cd4 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 31 Jul 2013 17:21:25 +0800 Subject: net/usb/r8152: make sure the USB buffer is DMA-able Allocate the required memory before calling usb_control_msg. And the additional memory copy is necessary. Signed-off-by: Hayes Wang Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 60 ++++++++++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 25 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ee13f9eb740c..ef033ab80e7f 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -344,17 +344,41 @@ static const int multicast_filter_limit = 32; static int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) { - return usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), + int ret; + void *tmp; + + tmp = kmalloc(size, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0), RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, - value, index, data, size, 500); + value, index, tmp, size, 500); + + memcpy(data, tmp, size); + kfree(tmp); + + return ret; } static int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data) { - return usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), + int ret; + void *tmp; + + tmp = kmalloc(size, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + memcpy(tmp, data, size); + + ret = usb_control_msg(tp->udev, usb_sndctrlpipe(tp->udev, 0), RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, - value, index, data, size, 500); + value, index, tmp, size, 500); + + kfree(tmp); + return ret; } static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size, @@ -685,21 +709,14 @@ static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data) static inline void set_ethernet_addr(struct r8152 *tp) { struct net_device *dev = tp->netdev; - u8 *node_id; + u8 node_id[8] = {0}; - node_id = kmalloc(sizeof(u8) * 8, GFP_KERNEL); - if (!node_id) { - netif_err(tp, probe, dev, "out of memory"); - return; - } - - if (pla_ocp_read(tp, PLA_IDR, sizeof(u8) * 8, node_id) < 0) + if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0) netif_notice(tp, probe, dev, "inet addr fail\n"); else { memcpy(dev->dev_addr, node_id, dev->addr_len); memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); } - kfree(node_id); } static int rtl8152_set_mac_address(struct net_device *netdev, void *p) @@ -882,15 +899,10 @@ static void rtl8152_set_rx_mode(struct net_device *netdev) static void _rtl8152_set_rx_mode(struct net_device *netdev) { struct r8152 *tp = netdev_priv(netdev); - u32 tmp, *mc_filter; /* Multicast hash filter */ + u32 mc_filter[2]; /* Multicast hash filter */ + __le32 tmp[2]; u32 ocp_data; - mc_filter = kmalloc(sizeof(u32) * 2, GFP_KERNEL); - if (!mc_filter) { - netif_err(tp, link, netdev, "out of memory"); - return; - } - clear_bit(RTL8152_SET_RX_MODE, &tp->flags); netif_stop_queue(netdev); ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR); @@ -918,14 +930,12 @@ static void _rtl8152_set_rx_mode(struct net_device *netdev) } } - tmp = mc_filter[0]; - mc_filter[0] = __cpu_to_le32(swab32(mc_filter[1])); - mc_filter[1] = __cpu_to_le32(swab32(tmp)); + tmp[0] = __cpu_to_le32(swab32(mc_filter[1])); + tmp[1] = __cpu_to_le32(swab32(mc_filter[0])); - pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(u32) * 2, mc_filter); + pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp); ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); netif_wake_queue(netdev); - kfree(mc_filter); } static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb, -- cgit v1.2.3 From c8826de8af3b3c849ba9197851211ced62387a57 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Wed, 31 Jul 2013 17:21:26 +0800 Subject: net/usb/r8152: adjust relative ocp function - fix the conversion between cpu and __le32 - replace some pla_ocp and usb_ocp functions with generic_ocp function Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 66 +++++++++++++++++-------------------------------- 1 file changed, 23 insertions(+), 43 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ef033ab80e7f..11c51f275366 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -514,37 +514,31 @@ int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data) static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index) { - u32 data; + __le32 data; - if (type == MCU_TYPE_PLA) - pla_ocp_read(tp, index, sizeof(data), &data); - else - usb_ocp_read(tp, index, sizeof(data), &data); + generic_ocp_read(tp, index, sizeof(data), &data, type); return __le32_to_cpu(data); } static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data) { - if (type == MCU_TYPE_PLA) - pla_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); - else - usb_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(data), &data); + __le32 tmp = __cpu_to_le32(data); + + generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type); } static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) { u32 data; + __le32 tmp; u8 shift = index & 2; index &= ~3; - if (type == MCU_TYPE_PLA) - pla_ocp_read(tp, index, sizeof(data), &data); - else - usb_ocp_read(tp, index, sizeof(data), &data); + generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); - data = __le32_to_cpu(data); + data = __le32_to_cpu(tmp); data >>= (shift * 8); data &= 0xffff; @@ -553,7 +547,8 @@ static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index) static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) { - u32 tmp, mask = 0xffff; + u32 mask = 0xffff; + __le32 tmp; u16 byen = BYTE_EN_WORD; u8 shift = index & 2; @@ -566,34 +561,25 @@ static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data) index &= ~3; } - if (type == MCU_TYPE_PLA) - pla_ocp_read(tp, index, sizeof(tmp), &tmp); - else - usb_ocp_read(tp, index, sizeof(tmp), &tmp); + generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); - tmp = __le32_to_cpu(tmp) & ~mask; - tmp |= data; - tmp = __cpu_to_le32(tmp); + data |= __le32_to_cpu(tmp) & ~mask; + tmp = __cpu_to_le32(data); - if (type == MCU_TYPE_PLA) - pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); - else - usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); + generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); } static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) { u32 data; + __le32 tmp; u8 shift = index & 3; index &= ~3; - if (type == MCU_TYPE_PLA) - pla_ocp_read(tp, index, sizeof(data), &data); - else - usb_ocp_read(tp, index, sizeof(data), &data); + generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); - data = __le32_to_cpu(data); + data = __le32_to_cpu(tmp); data >>= (shift * 8); data &= 0xff; @@ -602,7 +588,8 @@ static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index) static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) { - u32 tmp, mask = 0xff; + u32 mask = 0xff; + __le32 tmp; u16 byen = BYTE_EN_BYTE; u8 shift = index & 3; @@ -615,19 +602,12 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data) index &= ~3; } - if (type == MCU_TYPE_PLA) - pla_ocp_read(tp, index, sizeof(tmp), &tmp); - else - usb_ocp_read(tp, index, sizeof(tmp), &tmp); + generic_ocp_read(tp, index, sizeof(tmp), &tmp, type); - tmp = __le32_to_cpu(tmp) & ~mask; - tmp |= data; - tmp = __cpu_to_le32(tmp); + data |= __le32_to_cpu(tmp) & ~mask; + tmp = __cpu_to_le32(data); - if (type == MCU_TYPE_PLA) - pla_ocp_write(tp, index, byen, sizeof(tmp), &tmp); - else - usb_ocp_write(tp, index, byen, sizeof(tmp), &tmp); + generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type); } static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value) -- cgit v1.2.3 From cf3c4c03060b688cbc389ebc5065ebcce5653e96 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 31 Jul 2013 09:03:56 -0400 Subject: 8139cp: Add dma_mapping_error checking Self explanitory dma_mapping_error addition to the 8139 driver, based on this: https://bugzilla.redhat.com/show_bug.cgi?id=947250 It showed several backtraces arising for dma_map_* usage without checking the return code on the mapping. Add the check and abort the rx/tx operation if its failed. Untested as I have no hardware and the reporter has wandered off, but seems pretty straightforward. Signed-off-by: Neil Horman CC: "David S. Miller" CC: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 48 ++++++++++++++++++++++++++++++++--- 1 file changed, 45 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index e6acb9fa5767..6f35f8404d68 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -478,7 +478,7 @@ rx_status_loop: while (1) { u32 status, len; - dma_addr_t mapping; + dma_addr_t mapping, new_mapping; struct sk_buff *skb, *new_skb; struct cp_desc *desc; const unsigned buflen = cp->rx_buf_sz; @@ -520,6 +520,13 @@ rx_status_loop: goto rx_next; } + new_mapping = dma_map_single(&cp->pdev->dev, new_skb->data, buflen, + PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&cp->pdev->dev, new_mapping)) { + dev->stats.rx_dropped++; + goto rx_next; + } + dma_unmap_single(&cp->pdev->dev, mapping, buflen, PCI_DMA_FROMDEVICE); @@ -531,12 +538,11 @@ rx_status_loop: skb_put(skb, len); - mapping = dma_map_single(&cp->pdev->dev, new_skb->data, buflen, - PCI_DMA_FROMDEVICE); cp->rx_skb[rx_tail] = new_skb; cp_rx_skb(cp, skb, desc); rx++; + mapping = new_mapping; rx_next: cp->rx_ring[rx_tail].opts2 = 0; @@ -716,6 +722,22 @@ static inline u32 cp_tx_vlan_tag(struct sk_buff *skb) TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00; } +static void unwind_tx_frag_mapping(struct cp_private *cp, struct sk_buff *skb, + int first, int entry_last) +{ + int frag, index; + struct cp_desc *txd; + skb_frag_t *this_frag; + for (frag = 0; frag+first < entry_last; frag++) { + index = first+frag; + cp->tx_skb[index] = NULL; + txd = &cp->tx_ring[index]; + this_frag = &skb_shinfo(skb)->frags[frag]; + dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr), + skb_frag_size(this_frag), PCI_DMA_TODEVICE); + } +} + static netdev_tx_t cp_start_xmit (struct sk_buff *skb, struct net_device *dev) { @@ -749,6 +771,9 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, len = skb->len; mapping = dma_map_single(&cp->pdev->dev, skb->data, len, PCI_DMA_TODEVICE); + if (dma_mapping_error(&cp->pdev->dev, mapping)) + goto out_dma_error; + txd->opts2 = opts2; txd->addr = cpu_to_le64(mapping); wmb(); @@ -786,6 +811,9 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, first_len = skb_headlen(skb); first_mapping = dma_map_single(&cp->pdev->dev, skb->data, first_len, PCI_DMA_TODEVICE); + if (dma_mapping_error(&cp->pdev->dev, first_mapping)) + goto out_dma_error; + cp->tx_skb[entry] = skb; entry = NEXT_TX(entry); @@ -799,6 +827,11 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, mapping = dma_map_single(&cp->pdev->dev, skb_frag_address(this_frag), len, PCI_DMA_TODEVICE); + if (dma_mapping_error(&cp->pdev->dev, mapping)) { + unwind_tx_frag_mapping(cp, skb, first_entry, entry); + goto out_dma_error; + } + eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; ctrl = eor | len | DescOwn; @@ -859,11 +892,16 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb, if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1)) netif_stop_queue(dev); +out_unlock: spin_unlock_irqrestore(&cp->lock, intr_flags); cpw8(TxPoll, NormalTxPoll); return NETDEV_TX_OK; +out_dma_error: + kfree_skb(skb); + cp->dev->stats.tx_dropped++; + goto out_unlock; } /* Set or clear the multicast filter for this adaptor. @@ -1054,6 +1092,10 @@ static int cp_refill_rx(struct cp_private *cp) mapping = dma_map_single(&cp->pdev->dev, skb->data, cp->rx_buf_sz, PCI_DMA_FROMDEVICE); + if (dma_mapping_error(&cp->pdev->dev, mapping)) { + kfree_skb(skb); + goto err_out; + } cp->rx_skb[i] = skb; cp->rx_ring[i].opts2 = 0; -- cgit v1.2.3 From 0508ad646836007e6e6b62331eee7356844eac3d Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 1 Aug 2013 19:55:00 +0300 Subject: net/mlx4_core: Don't give VFs MAC addresses which are derived from the PF MAC If the user has not assigned a MAC address to a VM, then don't give it MAC which is based on the PF one. The current derivation scheme is wrong and leads to VM MAC collisions when the number of cards/hypervisors becomes big enough. Instead, just give it zeros and let them figure out what to do with that. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 8873d6802c80..6fc6dabc78d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -845,16 +845,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_CMD_NATIVE); if (!err && dev->caps.function != slave) { - /* if config MAC in DB use it */ - if (priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac) - def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; - else { - /* set slave default_mac address */ - MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); - def_mac += slave << 8; - priv->mfunc.master.vf_admin[slave].vport[vhcr->in_modifier].mac = def_mac; - } - + def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET); /* get port type - currently only eth is enabled */ -- cgit v1.2.3 From b30513202c6c14120f70b2e9aa1e97d47bbc2313 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 1 Aug 2013 19:55:01 +0300 Subject: net/mlx4_core: VFs must ignore the enable_64b_cqe_eqe module param Slaves get the 64B CQE/EQE state from QUERY_HCA, not from the module parameter. If the parameter is set to zero, the slave outputs an incorrect/irrelevant warning message that 64B CQEs/EQEs are supported but not enabled (even if the hypervisor has enabled 64B CQEs/EQEs). Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e85af922dcdc..36be3208786a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -371,7 +371,7 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.sqp_demux = (mlx4_is_master(dev)) ? MLX4_MAX_NUM_SLAVES : 0; - if (!enable_64b_cqe_eqe) { + if (!enable_64b_cqe_eqe && !mlx4_is_slave(dev)) { if (dev_cap->flags & (MLX4_DEV_CAP_FLAG_64B_CQE | MLX4_DEV_CAP_FLAG_64B_EQE)) { mlx4_warn(dev, "64B EQEs/CQEs supported by the device but not enabled\n"); -- cgit v1.2.3 From e0d1095ae3405404d247afb00233ef837d58da83 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Thu, 1 Aug 2013 11:10:25 +0800 Subject: net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL Eliezer renames several *ll_poll to *busy_poll, but forgets CONFIG_NET_LL_RX_POLL, so in case of confusion, rename it too. Cc: Eliezer Tamir Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 8 ++++---- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 12 ++++++------ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 +++--- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 6 +++--- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 6 +++--- drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 10 +++++----- include/linux/netdevice.h | 2 +- include/linux/skbuff.h | 2 +- include/net/busy_poll.h | 6 +++--- include/net/sock.h | 2 +- net/Kconfig | 2 +- net/core/skbuff.c | 2 +- net/core/sock.c | 6 +++--- net/core/sysctl_net_core.c | 2 +- net/socket.c | 2 +- 18 files changed, 41 insertions(+), 41 deletions(-) (limited to 'drivers/net') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 1c15043aaee4..d569f2a424d5 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -52,7 +52,7 @@ Default: 64 busy_read ---------------- -Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL) +Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL) Approximate time in us to busy loop waiting for packets on the device queue. This sets the default value of the SO_BUSY_POLL socket option. Can be set or overridden per socket by setting socket option SO_BUSY_POLL, @@ -63,7 +63,7 @@ Default: 0 (off) busy_poll ---------------- -Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL) +Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL) Approximate time in us to busy loop waiting for events. Recommended value depends on the number of sockets you poll on. For several sockets 50, for several hundreds 100. diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index dedbd76c033e..d80e34b8285f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -486,7 +486,7 @@ struct bnx2x_fastpath { struct napi_struct napi; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int state; #define BNX2X_FP_STATE_IDLE 0 #define BNX2X_FP_STATE_NAPI (1 << 0) /* NAPI owns this FP */ @@ -498,7 +498,7 @@ struct bnx2x_fastpath { #define BNX2X_FP_USER_PEND (BNX2X_FP_STATE_POLL | BNX2X_FP_STATE_POLL_YIELD) /* protect state */ spinlock_t lock; -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ union host_hc_status_block status_blk; /* chip independent shortcuts into sb structure */ @@ -572,7 +572,7 @@ struct bnx2x_fastpath { #define bnx2x_fp_stats(bp, fp) (&((bp)->fp_stats[(fp)->index])) #define bnx2x_fp_qstats(bp, fp) (&((bp)->fp_stats[(fp)->index].eth_q_stats)) -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL static inline void bnx2x_fp_init_lock(struct bnx2x_fastpath *fp) { spin_lock_init(&fp->lock); @@ -680,7 +680,7 @@ static inline bool bnx2x_fp_ll_polling(struct bnx2x_fastpath *fp) { return false; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ /* Use 2500 as a mini-jumbo MTU for FCoE */ #define BNX2X_FCOE_MINI_JUMBO_MTU 2500 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index ee350bde1818..f2d1ff10054b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3117,7 +3117,7 @@ int bnx2x_poll(struct napi_struct *napi, int budget) return work_done; } -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL /* must be called with local_bh_disable()d */ int bnx2x_low_latency_recv(struct napi_struct *napi) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e5da07858a2f..e06186c305d8 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12026,7 +12026,7 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_fcoe_get_wwn = bnx2x_fcoe_get_wwn, #endif -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL .ndo_busy_poll = bnx2x_low_latency_recv, #endif }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 7be725cdfea8..a6494e5daffe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -54,7 +54,7 @@ #include -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL #define LL_EXTENDED_STATS #endif /* common prefix used by pr_<> macros */ @@ -366,7 +366,7 @@ struct ixgbe_q_vector { struct rcu_head rcu; /* to avoid race with update stats on free */ char name[IFNAMSIZ + 9]; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int state; #define IXGBE_QV_STATE_IDLE 0 #define IXGBE_QV_STATE_NAPI 1 /* NAPI owns this QV */ @@ -377,12 +377,12 @@ struct ixgbe_q_vector { #define IXGBE_QV_YIELD (IXGBE_QV_STATE_NAPI_YIELD | IXGBE_QV_STATE_POLL_YIELD) #define IXGBE_QV_USER_PEND (IXGBE_QV_STATE_POLL | IXGBE_QV_STATE_POLL_YIELD) spinlock_t lock; -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ /* for dynamic allocation of rings associated with this q_vector */ struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp; }; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector) { @@ -462,7 +462,7 @@ static inline bool ixgbe_qv_ll_polling(struct ixgbe_q_vector *q_vector) WARN_ON(!(q_vector->state & IXGBE_QV_LOCKED)); return q_vector->state & IXGBE_QV_USER_PEND; } -#else /* CONFIG_NET_LL_RX_POLL */ +#else /* CONFIG_NET_RX_BUSY_POLL */ static inline void ixgbe_qv_init_lock(struct ixgbe_q_vector *q_vector) { } @@ -491,7 +491,7 @@ static inline bool ixgbe_qv_ll_polling(struct ixgbe_q_vector *q_vector) { return false; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ #ifdef CONFIG_IXGBE_HWMON diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index bad8f14b1941..be4b1fb3d0d2 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -1998,7 +1998,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, return total_rx_packets; } -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL /* must be called with local_bh_disable()d */ static int ixgbe_low_latency_recv(struct napi_struct *napi) { @@ -2030,7 +2030,7 @@ static int ixgbe_low_latency_recv(struct napi_struct *napi) return found; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ /** * ixgbe_configure_msix - Configure MSI-X hardware @@ -7227,7 +7227,7 @@ static const struct net_device_ops ixgbe_netdev_ops = { #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = ixgbe_netpoll, #endif -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL .ndo_busy_poll = ixgbe_low_latency_recv, #endif #ifdef IXGBE_FCOE diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c index 727874f575ce..a28cd801a236 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -223,7 +223,7 @@ static int mlx4_en_get_sset_count(struct net_device *dev, int sset) case ETH_SS_STATS: return (priv->stats_bitmap ? bit_count : NUM_ALL_STATS) + (priv->tx_ring_num * 2) + -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL (priv->rx_ring_num * 5); #else (priv->rx_ring_num * 2); @@ -276,7 +276,7 @@ static void mlx4_en_get_ethtool_stats(struct net_device *dev, for (i = 0; i < priv->rx_ring_num; i++) { data[index++] = priv->rx_ring[i].packets; data[index++] = priv->rx_ring[i].bytes; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL data[index++] = priv->rx_ring[i].yields; data[index++] = priv->rx_ring[i].misses; data[index++] = priv->rx_ring[i].cleaned; @@ -344,7 +344,7 @@ static void mlx4_en_get_strings(struct net_device *dev, "rx%d_packets", i); sprintf(data + (index++) * ETH_GSTRING_LEN, "rx%d_bytes", i); -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL sprintf(data + (index++) * ETH_GSTRING_LEN, "rx%d_napi_yield", i); sprintf(data + (index++) * ETH_GSTRING_LEN, diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 5eac871399d8..fa37b7a61213 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -68,7 +68,7 @@ int mlx4_en_setup_tc(struct net_device *dev, u8 up) return 0; } -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL /* must be called with local_bh_disable()d */ static int mlx4_en_low_latency_recv(struct napi_struct *napi) { @@ -94,7 +94,7 @@ static int mlx4_en_low_latency_recv(struct napi_struct *napi) return done; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ #ifdef CONFIG_RFS_ACCEL @@ -2140,7 +2140,7 @@ static const struct net_device_ops mlx4_netdev_ops = { #ifdef CONFIG_RFS_ACCEL .ndo_rx_flow_steer = mlx4_en_filter_rfs, #endif -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL .ndo_busy_poll = mlx4_en_low_latency_recv, #endif }; diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 35fb60e2320c..5e0aa569306a 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -292,7 +292,7 @@ struct mlx4_en_rx_ring { void *rx_info; unsigned long bytes; unsigned long packets; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned long yields; unsigned long misses; unsigned long cleaned; @@ -318,7 +318,7 @@ struct mlx4_en_cq { struct mlx4_cqe *buf; #define MLX4_EN_OPCODE_ERROR 0x1e -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int state; #define MLX4_EN_CQ_STATE_IDLE 0 #define MLX4_EN_CQ_STATE_NAPI 1 /* NAPI owns this CQ */ @@ -329,7 +329,7 @@ struct mlx4_en_cq { #define CQ_YIELD (MLX4_EN_CQ_STATE_NAPI_YIELD | MLX4_EN_CQ_STATE_POLL_YIELD) #define CQ_USER_PEND (MLX4_EN_CQ_STATE_POLL | MLX4_EN_CQ_STATE_POLL_YIELD) spinlock_t poll_lock; /* protects from LLS/napi conflicts */ -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ }; struct mlx4_en_port_profile { @@ -580,7 +580,7 @@ struct mlx4_mac_entry { struct rcu_head rcu; }; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL static inline void mlx4_en_cq_init_lock(struct mlx4_en_cq *cq) { spin_lock_init(&cq->poll_lock); @@ -687,7 +687,7 @@ static inline bool mlx4_en_cq_ll_polling(struct mlx4_en_cq *cq) { return false; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ #define MLX4_EN_WOL_DO_MODIFY (1ULL << 63) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 0741a1e919a5..9a4156845e93 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -973,7 +973,7 @@ struct net_device_ops { gfp_t gfp); void (*ndo_netpoll_cleanup)(struct net_device *dev); #endif -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL int (*ndo_busy_poll)(struct napi_struct *dev); #endif int (*ndo_set_vf_mac)(struct net_device *dev, diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 5afefa01a13c..3b71a4e83642 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -501,7 +501,7 @@ struct sk_buff { /* 7/9 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); -#if defined CONFIG_NET_DMA || defined CONFIG_NET_LL_RX_POLL +#if defined CONFIG_NET_DMA || defined CONFIG_NET_RX_BUSY_POLL union { unsigned int napi_id; dma_cookie_t dma_cookie; diff --git a/include/net/busy_poll.h b/include/net/busy_poll.h index 6cd8848fec68..f18b91966d3d 100644 --- a/include/net/busy_poll.h +++ b/include/net/busy_poll.h @@ -27,7 +27,7 @@ #include #include -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL struct napi_struct; extern unsigned int sysctl_net_busy_read __read_mostly; @@ -146,7 +146,7 @@ static inline void sk_mark_napi_id(struct sock *sk, struct sk_buff *skb) sk->sk_napi_id = skb->napi_id; } -#else /* CONFIG_NET_LL_RX_POLL */ +#else /* CONFIG_NET_RX_BUSY_POLL */ static inline unsigned long net_busy_loop_on(void) { return 0; @@ -186,5 +186,5 @@ static inline bool sk_busy_loop(struct sock *sk, int nonblock) return false; } -#endif /* CONFIG_NET_LL_RX_POLL */ +#endif /* CONFIG_NET_RX_BUSY_POLL */ #endif /* _LINUX_NET_BUSY_POLL_H */ diff --git a/include/net/sock.h b/include/net/sock.h index 95a5a2c6925a..31d5cfbb51ec 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -327,7 +327,7 @@ struct sock { #ifdef CONFIG_RPS __u32 sk_rxhash; #endif -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int sk_napi_id; unsigned int sk_ll_usec; #endif diff --git a/net/Kconfig b/net/Kconfig index 37702491abe9..2b406608a1a4 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -244,7 +244,7 @@ config NETPRIO_CGROUP Cgroup subsystem for use in assigning processes to network priorities on a per-interface basis -config NET_LL_RX_POLL +config NET_RX_BUSY_POLL boolean default y diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 3df4d4ccf440..2c3d0f53d198 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -740,7 +740,7 @@ static void __copy_skb_header(struct sk_buff *new, const struct sk_buff *old) skb_copy_secmark(new, old); -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL new->napi_id = old->napi_id; #endif } diff --git a/net/core/sock.c b/net/core/sock.c index 548d716c5f62..2c097c5a35dd 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -900,7 +900,7 @@ set_rcvbuf: sock_valbool_flag(sk, SOCK_SELECT_ERR_QUEUE, valbool); break; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL case SO_BUSY_POLL: /* allow unprivileged users to decrease the value */ if ((val > sk->sk_ll_usec) && !capable(CAP_NET_ADMIN)) @@ -1170,7 +1170,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname, v.val = sock_flag(sk, SOCK_SELECT_ERR_QUEUE); break; -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL case SO_BUSY_POLL: v.val = sk->sk_ll_usec; break; @@ -2292,7 +2292,7 @@ void sock_init_data(struct socket *sock, struct sock *sk) sk->sk_stamp = ktime_set(-1L, 0); -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL sk->sk_napi_id = 0; sk->sk_ll_usec = sysctl_net_busy_read; #endif diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index 660968616637..b59b6804fd98 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -298,7 +298,7 @@ static struct ctl_table net_core_table[] = { .proc_handler = flow_limit_table_len_sysctl }, #endif /* CONFIG_NET_FLOW_LIMIT */ -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL { .procname = "busy_poll", .data = &sysctl_net_busy_poll, diff --git a/net/socket.c b/net/socket.c index 829b460acb87..b2d7c629eeb9 100644 --- a/net/socket.c +++ b/net/socket.c @@ -106,7 +106,7 @@ #include #include -#ifdef CONFIG_NET_LL_RX_POLL +#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int sysctl_net_busy_read __read_mostly; unsigned int sysctl_net_busy_poll __read_mostly; #endif -- cgit v1.2.3 From 266e83474c98e9f18d31f4837cfe05819a660d32 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 1 Aug 2013 13:43:19 +0300 Subject: macvlan: better mode validation macvlan passthrough mode is special: it's not possible to switch to or from it through a netlink command. But if you try, the command will succeed, which is confusing. Validate input and return error to user. Cc: Sridhar Samudrala Cc: "David S. Miller" Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 18373b6ae37d..13937f9c04ad 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -863,6 +863,18 @@ static int macvlan_changelink(struct net_device *dev, struct nlattr *tb[], struct nlattr *data[]) { struct macvlan_dev *vlan = netdev_priv(dev); + enum macvlan_mode mode; + bool set_mode = false; + + /* Validate mode, but don't set yet: setting flags may fail. */ + if (data && data[IFLA_MACVLAN_MODE]) { + set_mode = true; + mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); + /* Passthrough mode can't be set or cleared dynamically */ + if ((mode == MACVLAN_MODE_PASSTHRU) != + (vlan->mode == MACVLAN_MODE_PASSTHRU)) + return -EINVAL; + } if (data && data[IFLA_MACVLAN_FLAGS]) { __u16 flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); @@ -879,8 +891,8 @@ static int macvlan_changelink(struct net_device *dev, } vlan->flags = flags; } - if (data && data[IFLA_MACVLAN_MODE]) - vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]); + if (set_mode) + vlan->mode = mode; return 0; } -- cgit v1.2.3 From 787381415cf967c5d6d1d7c5b5bd893376945edd Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 1 Aug 2013 13:50:10 +0300 Subject: macvlan: handle set_promiscuity failures It's quite unlikely that dev_set_promiscuity will fail, but worth checking just in case. Cc: "David S. Miller" Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 13937f9c04ad..d0f9c2fd1d4f 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -337,8 +337,11 @@ static int macvlan_open(struct net_device *dev) int err; if (vlan->port->passthru) { - if (!(vlan->flags & MACVLAN_FLAG_NOPROMISC)) - dev_set_promiscuity(lowerdev, 1); + if (!(vlan->flags & MACVLAN_FLAG_NOPROMISC)) { + err = dev_set_promiscuity(lowerdev, 1); + if (err < 0) + goto out; + } goto hash_add; } -- cgit v1.2.3 From eca396d7a5bdcc1fd67b1b12f737c213ac78a6f4 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 1 Aug 2013 12:07:13 +0200 Subject: iwl4965: set power mode early If device was put into a sleep and system was restarted or module reloaded, we have to wake device up before sending other commands. Otherwise it will fail to start with Microcode error. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-mac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index b9b2bb51e605..f0b7794fca3e 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5334,6 +5334,9 @@ il4965_alive_start(struct il_priv *il) il->active_rate = RATES_MASK; + il_power_update_mode(il, true); + D_INFO("Updated power mode\n"); + if (il_is_associated(il)) { struct il_rxon_cmd *active_rxon = (struct il_rxon_cmd *)&il->active; @@ -5364,9 +5367,6 @@ il4965_alive_start(struct il_priv *il) D_INFO("ALIVE processing complete.\n"); wake_up(&il->wait_command_queue); - il_power_update_mode(il, true); - D_INFO("Updated power mode\n"); - return; restart: -- cgit v1.2.3 From 788f7a56fce1bcb2067b62b851a086fca48a0056 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 1 Aug 2013 12:07:55 +0200 Subject: iwl4965: reset firmware after rfkill off Using rfkill switch can make firmware unstable, what cause various Microcode errors and kernel warnings. Reseting firmware just after rfkill off (radio on) helped with that. Resolve: https://bugzilla.redhat.com/show_bug.cgi?id=977053 Reported-and-tested-by: Justin Pearce Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-mac.c | 10 +++++----- drivers/net/wireless/iwlegacy/common.c | 1 + 2 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index f0b7794fca3e..f2ed62e37340 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -4460,12 +4460,12 @@ il4965_irq_tasklet(struct il_priv *il) * is killed. Hence update the killswitch state here. The * rfkill handler will care about restarting if needed. */ - if (!test_bit(S_ALIVE, &il->status)) { - if (hw_rf_kill) - set_bit(S_RFKILL, &il->status); - else - clear_bit(S_RFKILL, &il->status); + if (hw_rf_kill) { + set_bit(S_RFKILL, &il->status); + } else { + clear_bit(S_RFKILL, &il->status); wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill); + il_force_reset(il, true); } handled |= CSR_INT_BIT_RF_KILL; diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 3195aad440dd..b03e22ef5462 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4660,6 +4660,7 @@ il_force_reset(struct il_priv *il, bool external) return 0; } +EXPORT_SYMBOL(il_force_reset); int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, -- cgit v1.2.3 From 7069f982b9099133b44e3cecbdd0192d81590bec Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 2 Aug 2013 10:44:10 +0300 Subject: net: ethernet: cpsw: drop IRQF_DISABLED IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Felipe Balbi Acked-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 05a1674e204f..22a7a4336211 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1867,7 +1867,7 @@ static int cpsw_probe(struct platform_device *pdev) while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { for (i = res->start; i <= res->end; i++) { - if (request_irq(i, cpsw_interrupt, IRQF_DISABLED, + if (request_irq(i, cpsw_interrupt, 0, dev_name(&pdev->dev), priv)) { dev_err(priv->dev, "error attaching irq\n"); goto clean_ale_ret; -- cgit v1.2.3 From 9bb8eeb554795e6fac7cacf7af44bf413e75c9b9 Mon Sep 17 00:00:00 2001 From: Lekensteyn Date: Fri, 2 Aug 2013 10:36:55 +0200 Subject: r8169: remove "PHY reset until link up" log spam This message was added in commit a7154cb8 (June 2004, [PATCH] r8169: link handling and phy reset rework) and is printed every ten seconds when no cable is connected and runtime power management is disabled. (Before that commit, "Reset RTL8169s PHY" would be printed instead.) Signed-off-by: Peter Wu Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 880015cae6a3..b5eb4195fc99 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3689,7 +3689,7 @@ static void rtl_phy_work(struct rtl8169_private *tp) if (tp->link_ok(ioaddr)) return; - netif_warn(tp, link, tp->dev, "PHY reset until link up\n"); + netif_dbg(tp, link, tp->dev, "PHY reset until link up\n"); tp->phy_reset_enable(tp); -- cgit v1.2.3 From 3508ea333ed5414561af4c818b3b80c0acca1845 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Fri, 2 Aug 2013 13:50:54 +0400 Subject: sis900: Fix the tx queue timeout issue [ 198.720048] ------------[ cut here ]------------ [ 198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240() [ 198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out [ 198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii [ 198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12 [ 198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS Revision 1013 Beta 001 12/14/2001 [ 198.720175] 000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24 [ 198.720197] 00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10 [ 198.720217] c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea [ 198.720240] Call Trace: [ 198.720257] [] ? dev_watchdog+0x229/0x240 [ 198.720274] [] dump_stack+0x16/0x20 [ 198.720306] [] warn_slowpath_common+0x7d/0xa0 [ 198.720318] [] ? dev_watchdog+0x229/0x240 [ 198.720330] [] warn_slowpath_fmt+0x33/0x40 [ 198.720342] [] dev_watchdog+0x229/0x240 [ 198.720357] [] call_timer_fn+0x78/0x150 [ 198.720369] [] ? internal_add_timer+0x40/0x40 [ 198.720381] [] ? dev_init_scheduler+0xa0/0xa0 [ 198.720392] [] run_timer_softirq+0x10f/0x200 [ 198.720412] [] ? __do_softirq+0x6f/0x210 [ 198.720424] [] ? dev_init_scheduler+0xa0/0xa0 [ 198.720435] [] __do_softirq+0xb8/0x210 [ 198.720467] [] ? _raw_spin_unlock+0x22/0x30 [ 198.720484] [] ? handle_irq+0x25/0xd0 [ 198.720496] [] irq_exit+0x9c/0xb0 [ 198.720508] [] do_IRQ+0x47/0x94 [ 198.720534] [] ? hrtimer_start+0x28/0x30 [ 198.720564] [] common_interrupt+0x31/0x38 [ 198.720589] [] ? default_idle+0x22/0xa0 [ 198.720600] [] arch_cpu_idle+0x17/0x30 [ 198.720631] [] cpu_startup_entry+0xcd/0x180 [ 198.720643] [] rest_init+0xaa/0xb0 [ 198.720654] [] ? reciprocal_value+0x50/0x50 [ 198.720668] [] ? repair_env_string+0x60/0x60 [ 198.720679] [] start_kernel+0x29a/0x350 [ 198.720690] [] ? repair_env_string+0x60/0x60 [ 198.720721] [] i386_start_kernel+0x39/0xa0 [ 198.720729] ---[ end trace 81e0a6266f5c73a8 ]--- [ 198.720740] eth0: Transmit timeout, status 00000204 00000000 timer routine checks the link status and if it's up calls netif_carrier_on() allowing upper layer to start the tx queue even if the auto-negotiation process is not finished. Also remove ugly auto-negotiation check from the sis900_start_xmit() CC: Duan Fugang CC: Ben Hutchings Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/ethernet/sis/sis900.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index eb4aea3fe793..f5d7ad75e479 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1318,7 +1318,7 @@ static void sis900_timer(unsigned long data) if (duplex){ sis900_set_mode(sis_priv, speed, duplex); sis630_set_eq(net_dev, sis_priv->chipset_rev); - netif_start_queue(net_dev); + netif_carrier_on(net_dev); } sis_priv->timer.expires = jiffies + HZ; @@ -1336,10 +1336,8 @@ static void sis900_timer(unsigned long data) status = sis900_default_phy(net_dev); mii_phy = sis_priv->mii; - if (status & MII_STAT_LINK){ + if (status & MII_STAT_LINK) sis900_check_mode(net_dev, mii_phy); - netif_carrier_on(net_dev); - } } else { /* Link ON -> OFF */ if (!(status & MII_STAT_LINK)){ @@ -1612,12 +1610,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) unsigned int index_cur_tx, index_dirty_tx; unsigned int count_dirty_tx; - /* Don't transmit data before the complete of auto-negotiation */ - if(!sis_priv->autong_complete){ - netif_stop_queue(net_dev); - return NETDEV_TX_BUSY; - } - spin_lock_irqsave(&sis_priv->lock, flags); /* Calculate the next Tx descriptor entry. */ -- cgit v1.2.3 From b6bb1c63dd46c4a9cdccbf5b5db49386eb6759a9 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Sat, 3 Aug 2013 16:39:45 +0530 Subject: net: ethernet: davinci_emac: drop IRQF_DISABLED IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 07b176bcf929..1a222bce4bd7 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1568,8 +1568,7 @@ static int emac_dev_open(struct net_device *ndev) while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { for (i = res->start; i <= res->end; i++) { if (devm_request_irq(&priv->pdev->dev, i, emac_irq, - IRQF_DISABLED, - ndev->name, ndev)) + 0, ndev->name, ndev)) goto rollback; } k++; -- cgit v1.2.3 From 4a99ab56cea66f9f67b9d07ace5cd40a336c8e6f Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 2 Aug 2013 23:15:54 -0400 Subject: qlcnic: Fix MAC address filter issue on 82xx adapter Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index d3f8797efcc3..82a03d3de894 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -262,7 +262,7 @@ void qlcnic_82xx_change_filter(struct qlcnic_adapter *adapter, u64 *uaddr, mac_req = (struct qlcnic_mac_req *)&(req->words[0]); mac_req->op = vlan_id ? QLCNIC_MAC_VLAN_ADD : QLCNIC_MAC_ADD; - memcpy(mac_req->mac_addr, &uaddr, ETH_ALEN); + memcpy(mac_req->mac_addr, uaddr, ETH_ALEN); vlan_req = (struct qlcnic_vlan_req *)&req->words[1]; vlan_req->vlan_id = cpu_to_le16(vlan_id); -- cgit v1.2.3 From e0d138d99507362e2e77b4ff61b546a8b63d60b0 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 2 Aug 2013 23:15:55 -0400 Subject: qlcnic: Fix ingress MAC learning o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 99 +++++++++++++++++--------- 1 file changed, 66 insertions(+), 33 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 82a03d3de894..6946d354f44f 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -161,36 +161,68 @@ static inline int qlcnic_82xx_is_lb_pkt(u64 sts_data) return (qlcnic_get_sts_status(sts_data) == STATUS_CKSUM_LOOP) ? 1 : 0; } +static void qlcnic_delete_rx_list_mac(struct qlcnic_adapter *adapter, + struct qlcnic_filter *fil, + void *addr, u16 vlan_id) +{ + int ret; + u8 op; + + op = vlan_id ? QLCNIC_MAC_VLAN_ADD : QLCNIC_MAC_ADD; + ret = qlcnic_sre_macaddr_change(adapter, addr, vlan_id, op); + if (ret) + return; + + op = vlan_id ? QLCNIC_MAC_VLAN_DEL : QLCNIC_MAC_DEL; + ret = qlcnic_sre_macaddr_change(adapter, addr, vlan_id, op); + if (!ret) { + hlist_del(&fil->fnode); + adapter->rx_fhash.fnum--; + } +} + +static struct qlcnic_filter *qlcnic_find_mac_filter(struct hlist_head *head, + void *addr, u16 vlan_id) +{ + struct qlcnic_filter *tmp_fil = NULL; + struct hlist_node *n; + + hlist_for_each_entry_safe(tmp_fil, n, head, fnode) { + if (!memcmp(tmp_fil->faddr, addr, ETH_ALEN) && + tmp_fil->vlan_id == vlan_id) + return tmp_fil; + } + + return NULL; +} + void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter, struct sk_buff *skb, int loopback_pkt, u16 vlan_id) { struct ethhdr *phdr = (struct ethhdr *)(skb->data); struct qlcnic_filter *fil, *tmp_fil; - struct hlist_node *n; struct hlist_head *head; unsigned long time; u64 src_addr = 0; - u8 hindex, found = 0, op; + u8 hindex, op; int ret; memcpy(&src_addr, phdr->h_source, ETH_ALEN); + hindex = qlcnic_mac_hash(src_addr) & + (adapter->fhash.fbucket_size - 1); if (loopback_pkt) { if (adapter->rx_fhash.fnum >= adapter->rx_fhash.fmax) return; - hindex = qlcnic_mac_hash(src_addr) & - (adapter->fhash.fbucket_size - 1); head = &(adapter->rx_fhash.fhead[hindex]); - hlist_for_each_entry_safe(tmp_fil, n, head, fnode) { - if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) && - tmp_fil->vlan_id == vlan_id) { - time = tmp_fil->ftime; - if (jiffies > (QLCNIC_READD_AGE * HZ + time)) - tmp_fil->ftime = jiffies; - return; - } + tmp_fil = qlcnic_find_mac_filter(head, &src_addr, vlan_id); + if (tmp_fil) { + time = tmp_fil->ftime; + if (time_after(jiffies, QLCNIC_READD_AGE * HZ + time)) + tmp_fil->ftime = jiffies; + return; } fil = kzalloc(sizeof(struct qlcnic_filter), GFP_ATOMIC); @@ -205,36 +237,37 @@ void qlcnic_add_lb_filter(struct qlcnic_adapter *adapter, struct sk_buff *skb, adapter->rx_fhash.fnum++; spin_unlock(&adapter->rx_mac_learn_lock); } else { - hindex = qlcnic_mac_hash(src_addr) & - (adapter->fhash.fbucket_size - 1); - head = &(adapter->rx_fhash.fhead[hindex]); - spin_lock(&adapter->rx_mac_learn_lock); - hlist_for_each_entry_safe(tmp_fil, n, head, fnode) { - if (!memcmp(tmp_fil->faddr, &src_addr, ETH_ALEN) && - tmp_fil->vlan_id == vlan_id) { - found = 1; - break; - } - } + head = &adapter->fhash.fhead[hindex]; - if (!found) { - spin_unlock(&adapter->rx_mac_learn_lock); - return; - } + spin_lock(&adapter->mac_learn_lock); - op = vlan_id ? QLCNIC_MAC_VLAN_ADD : QLCNIC_MAC_ADD; - ret = qlcnic_sre_macaddr_change(adapter, (u8 *)&src_addr, - vlan_id, op); - if (!ret) { + tmp_fil = qlcnic_find_mac_filter(head, &src_addr, vlan_id); + if (tmp_fil) { op = vlan_id ? QLCNIC_MAC_VLAN_DEL : QLCNIC_MAC_DEL; ret = qlcnic_sre_macaddr_change(adapter, (u8 *)&src_addr, vlan_id, op); if (!ret) { - hlist_del(&(tmp_fil->fnode)); - adapter->rx_fhash.fnum--; + hlist_del(&tmp_fil->fnode); + adapter->fhash.fnum--; } + + spin_unlock(&adapter->mac_learn_lock); + + return; } + + spin_unlock(&adapter->mac_learn_lock); + + head = &adapter->rx_fhash.fhead[hindex]; + + spin_lock(&adapter->rx_mac_learn_lock); + + tmp_fil = qlcnic_find_mac_filter(head, &src_addr, vlan_id); + if (tmp_fil) + qlcnic_delete_rx_list_mac(adapter, tmp_fil, &src_addr, + vlan_id); + spin_unlock(&adapter->rx_mac_learn_lock); } } -- cgit v1.2.3 From f91bbcb0b82186b4d5669021b142c263b66505e1 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 2 Aug 2013 23:15:56 -0400 Subject: qlcnic: Free up memory in error path. Signed-off-by: Himanshu Madhani Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 0581a484ceb5..8d401babd491 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -210,10 +210,10 @@ int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *adapter, u32 fw_cmd) if (err) { dev_info(&adapter->pdev->dev, "Failed to set driver version in firmware\n"); - return -EIO; + err = -EIO; } - - return 0; + qlcnic_free_mbx_args(&cmd); + return err; } int -- cgit v1.2.3 From 01b91f4c31e434d08fa6b7f4d261cc4e98c0772a Mon Sep 17 00:00:00 2001 From: Pratik Pujar Date: Fri, 2 Aug 2013 23:15:57 -0400 Subject: qlcnic: Removed adapter series name from warning messages. Signed-off-by: Pratik Pujar Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index cc78d3924c6a..a849446da7c9 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2141,7 +2141,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (qlcnic_83xx_check(adapter) && !qlcnic_use_msi_x && !!qlcnic_use_msi) dev_warn(&pdev->dev, - "83xx adapter do not support MSI interrupts\n"); + "Device does not support MSI interrupts\n"); err = qlcnic_setup_intr(adapter, 0); if (err) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c index 56e85f98117f..5d40045b3cea 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c @@ -562,7 +562,7 @@ static int qlcnic_sriov_setup_vf(struct qlcnic_adapter *adapter, INIT_LIST_HEAD(&adapter->vf_mc_list); if (!qlcnic_use_msi_x && !!qlcnic_use_msi) dev_warn(&adapter->pdev->dev, - "83xx adapter do not support MSI interrupts\n"); + "Device does not support MSI interrupts\n"); err = qlcnic_setup_intr(adapter, 1); if (err) { -- cgit v1.2.3 From 2e3ea7e763f2ce33bbede1cd5cb8d4cd60f3e11a Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 2 Aug 2013 23:15:58 -0400 Subject: qlcnic: Fix external loopback test. Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 05a847e599c6..7a58e390e935 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -150,6 +150,7 @@ static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = { "Link_Test_on_offline", "Interrupt_Test_offline", "Internal_Loopback_offline", + "External_Loopback_offline", "EEPROM_Test_offline" }; @@ -1026,8 +1027,15 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test, if (data[3]) eth_test->flags |= ETH_TEST_FL_FAILED; - data[4] = qlcnic_eeprom_test(dev); - if (data[4]) + if (eth_test->flags & ETH_TEST_FL_EXTERNAL_LB) { + data[4] = qlcnic_loopback_test(dev, QLCNIC_ELB_MODE); + if (data[4]) + eth_test->flags |= ETH_TEST_FL_FAILED; + eth_test->flags |= ETH_TEST_FL_EXTERNAL_LB_DONE; + } + + data[5] = qlcnic_eeprom_test(dev); + if (data[5]) eth_test->flags |= ETH_TEST_FL_FAILED; } } -- cgit v1.2.3 From beb3d3a4d4830b1e090eedef0d0d7870639f09e0 Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Fri, 2 Aug 2013 23:15:59 -0400 Subject: qlcnic: Fix link speed display for 82xx adapter o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 7a58e390e935..ac42cde47888 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -301,9 +301,13 @@ int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, } if (netif_running(adapter->netdev) && ahw->has_link_events) { - reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn)); - speed = P3P_LINK_SPEED_VAL(pcifn, reg); - ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; + if (ahw->linkup) { + reg = QLCRD32(adapter, + P3P_LINK_SPEED_REG(pcifn)); + speed = P3P_LINK_SPEED_VAL(pcifn, reg); + ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; + } + ethtool_cmd_speed_set(ecmd, ahw->link_speed); ecmd->autoneg = ahw->link_autoneg; ecmd->duplex = ahw->link_duplex; -- cgit v1.2.3 From b1f5037f1b33a15fa2ad5c9c41837477465af063 Mon Sep 17 00:00:00 2001 From: Rajesh Borundia Date: Fri, 2 Aug 2013 23:16:00 -0400 Subject: qlcnic: Fix link speed and duplex display for 83xx adapter o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia Signed-off-by: Shahed Shaikh Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 25 ++++++++++++++-------- 1 file changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index bc483e1881a3..94ff7a43b679 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -2075,18 +2075,25 @@ void qlcnic_83xx_config_intr_coal(struct qlcnic_adapter *adapter) static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter, u32 data[]) { + struct qlcnic_hardware_context *ahw = adapter->ahw; u8 link_status, duplex; /* link speed */ link_status = LSB(data[3]) & 1; - adapter->ahw->link_speed = MSW(data[2]); - adapter->ahw->link_autoneg = MSB(MSW(data[3])); - adapter->ahw->module_type = MSB(LSW(data[3])); - duplex = LSB(MSW(data[3])); - if (duplex) - adapter->ahw->link_duplex = DUPLEX_FULL; - else - adapter->ahw->link_duplex = DUPLEX_HALF; - adapter->ahw->has_link_events = 1; + if (link_status) { + ahw->link_speed = MSW(data[2]); + duplex = LSB(MSW(data[3])); + if (duplex) + ahw->link_duplex = DUPLEX_FULL; + else + ahw->link_duplex = DUPLEX_HALF; + } else { + ahw->link_speed = SPEED_UNKNOWN; + ahw->link_duplex = DUPLEX_UNKNOWN; + } + + ahw->link_autoneg = MSB(MSW(data[3])); + ahw->module_type = MSB(LSW(data[3])); + ahw->has_link_events = 1; qlcnic_advert_link_change(adapter, link_status); } -- cgit v1.2.3 From 4bd8e7385961932d863ea976a67f384c3a8302cb Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Fri, 2 Aug 2013 23:16:01 -0400 Subject: qlcnic: Fix for flash update failure on 83xx adapter Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 12 +-- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 101 ++++++++++++--------- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 2 +- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 91 +++++++++++++------ drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 10 +- .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 63 +++++++++---- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 40 +++++--- drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c | 25 +++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 17 ++-- 10 files changed, 231 insertions(+), 132 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index f4bb8f5d7453..221645e9f182 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -1400,8 +1400,8 @@ void qlcnic_pci_camqm_write_2M(struct qlcnic_adapter *, u64, u64); #define ADDR_IN_RANGE(addr, low, high) \ (((addr) < (high)) && ((addr) >= (low))) -#define QLCRD32(adapter, off) \ - (adapter->ahw->hw_ops->read_reg)(adapter, off) +#define QLCRD32(adapter, off, err) \ + (adapter->ahw->hw_ops->read_reg)(adapter, off, err) #define QLCWR32(adapter, off, val) \ adapter->ahw->hw_ops->write_reg(adapter, off, val) @@ -1604,7 +1604,7 @@ struct qlcnic_nic_template { struct qlcnic_hardware_ops { void (*read_crb) (struct qlcnic_adapter *, char *, loff_t, size_t); void (*write_crb) (struct qlcnic_adapter *, char *, loff_t, size_t); - int (*read_reg) (struct qlcnic_adapter *, ulong); + int (*read_reg) (struct qlcnic_adapter *, ulong, int *); int (*write_reg) (struct qlcnic_adapter *, ulong, u32); void (*get_ocm_win) (struct qlcnic_hardware_context *); int (*get_mac_address) (struct qlcnic_adapter *, u8 *); @@ -1662,12 +1662,6 @@ static inline void qlcnic_write_crb(struct qlcnic_adapter *adapter, char *buf, adapter->ahw->hw_ops->write_crb(adapter, buf, offset, size); } -static inline int qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, - ulong off) -{ - return adapter->ahw->hw_ops->read_reg(adapter, off); -} - static inline int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, u32 data) { diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 94ff7a43b679..92da9980a0a0 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -228,17 +228,17 @@ static int __qlcnic_set_win_base(struct qlcnic_adapter *adapter, u32 addr) return 0; } -int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *adapter, ulong addr) +int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *adapter, ulong addr, + int *err) { - int ret; struct qlcnic_hardware_context *ahw = adapter->ahw; - ret = __qlcnic_set_win_base(adapter, (u32) addr); - if (!ret) { + *err = __qlcnic_set_win_base(adapter, (u32) addr); + if (!*err) { return QLCRDX(ahw, QLCNIC_WILDCARD); } else { dev_err(&adapter->pdev->dev, - "%s failed, addr = 0x%x\n", __func__, (int)addr); + "%s failed, addr = 0x%lx\n", __func__, addr); return -EIO; } } @@ -561,7 +561,7 @@ void qlcnic_83xx_cam_unlock(struct qlcnic_adapter *adapter) void qlcnic_83xx_read_crb(struct qlcnic_adapter *adapter, char *buf, loff_t offset, size_t size) { - int ret; + int ret = 0; u32 data; if (qlcnic_api_lock(adapter)) { @@ -571,7 +571,7 @@ void qlcnic_83xx_read_crb(struct qlcnic_adapter *adapter, char *buf, return; } - ret = qlcnic_83xx_rd_reg_indirect(adapter, (u32) offset); + data = QLCRD32(adapter, (u32) offset, &ret); qlcnic_api_unlock(adapter); if (ret == -EIO) { @@ -580,7 +580,6 @@ void qlcnic_83xx_read_crb(struct qlcnic_adapter *adapter, char *buf, __func__, (u32)offset); return; } - data = ret; memcpy(buf, &data, size); } @@ -2391,9 +2390,9 @@ int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, u8 *p_data, int count) { - int i, ret; - u32 word, range, flash_offset, addr = flash_addr; + u32 word, range, flash_offset, addr = flash_addr, ret; ulong indirect_add, direct_window; + int i, err = 0; flash_offset = addr & (QLCNIC_FLASH_SECTOR_SIZE - 1); if (addr & 0x3) { @@ -2411,10 +2410,9 @@ int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, /* Multi sector read */ for (i = 0; i < count; i++) { indirect_add = QLC_83XX_FLASH_DIRECT_DATA(addr); - ret = qlcnic_83xx_rd_reg_indirect(adapter, - indirect_add); - if (ret == -EIO) - return -EIO; + ret = QLCRD32(adapter, indirect_add, &err); + if (err == -EIO) + return err; word = ret; *(u32 *)p_data = word; @@ -2435,10 +2433,9 @@ int qlcnic_83xx_lockless_flash_read32(struct qlcnic_adapter *adapter, /* Single sector read */ for (i = 0; i < count; i++) { indirect_add = QLC_83XX_FLASH_DIRECT_DATA(addr); - ret = qlcnic_83xx_rd_reg_indirect(adapter, - indirect_add); - if (ret == -EIO) - return -EIO; + ret = QLCRD32(adapter, indirect_add, &err); + if (err == -EIO) + return err; word = ret; *(u32 *)p_data = word; @@ -2454,10 +2451,13 @@ static int qlcnic_83xx_poll_flash_status_reg(struct qlcnic_adapter *adapter) { u32 status; int retries = QLC_83XX_FLASH_READ_RETRY_COUNT; + int err = 0; do { - status = qlcnic_83xx_rd_reg_indirect(adapter, - QLC_83XX_FLASH_STATUS); + status = QLCRD32(adapter, QLC_83XX_FLASH_STATUS, &err); + if (err == -EIO) + return err; + if ((status & QLC_83XX_FLASH_STATUS_READY) == QLC_83XX_FLASH_STATUS_READY) break; @@ -2509,7 +2509,8 @@ int qlcnic_83xx_disable_flash_write(struct qlcnic_adapter *adapter) int qlcnic_83xx_read_flash_mfg_id(struct qlcnic_adapter *adapter) { - int ret, mfg_id; + int ret, err = 0; + u32 mfg_id; if (qlcnic_83xx_lock_flash(adapter)) return -EIO; @@ -2524,9 +2525,11 @@ int qlcnic_83xx_read_flash_mfg_id(struct qlcnic_adapter *adapter) return -EIO; } - mfg_id = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_RDDATA); - if (mfg_id == -EIO) - return -EIO; + mfg_id = QLCRD32(adapter, QLC_83XX_FLASH_RDDATA, &err); + if (err == -EIO) { + qlcnic_83xx_unlock_flash(adapter); + return err; + } adapter->flash_mfg_id = (mfg_id & 0xFF); qlcnic_83xx_unlock_flash(adapter); @@ -2643,7 +2646,7 @@ int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *adapter, u32 addr, u32 *p_data, int count) { u32 temp; - int ret = -EIO; + int ret = -EIO, err = 0; if ((count < QLC_83XX_FLASH_WRITE_MIN) || (count > QLC_83XX_FLASH_WRITE_MAX)) { @@ -2652,8 +2655,10 @@ int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *adapter, u32 addr, return -EIO; } - temp = qlcnic_83xx_rd_reg_indirect(adapter, - QLC_83XX_FLASH_SPI_CONTROL); + temp = QLCRD32(adapter, QLC_83XX_FLASH_SPI_CONTROL, &err); + if (err == -EIO) + return err; + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_SPI_CONTROL, (temp | QLC_83XX_FLASH_SPI_CTRL)); qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, @@ -2702,13 +2707,18 @@ int qlcnic_83xx_flash_bulk_write(struct qlcnic_adapter *adapter, u32 addr, return -EIO; } - ret = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_SPI_STATUS); + ret = QLCRD32(adapter, QLC_83XX_FLASH_SPI_STATUS, &err); + if (err == -EIO) + return err; + if ((ret & QLC_83XX_FLASH_SPI_CTRL) == QLC_83XX_FLASH_SPI_CTRL) { dev_err(&adapter->pdev->dev, "%s: failed at %d\n", __func__, __LINE__); /* Operation failed, clear error bit */ - temp = qlcnic_83xx_rd_reg_indirect(adapter, - QLC_83XX_FLASH_SPI_CONTROL); + temp = QLCRD32(adapter, QLC_83XX_FLASH_SPI_CONTROL, &err); + if (err == -EIO) + return err; + qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_SPI_CONTROL, (temp | QLC_83XX_FLASH_SPI_CTRL)); @@ -2830,6 +2840,7 @@ int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *adapter, u64 addr, { int i, j, ret = 0; u32 temp; + int err = 0; /* Check alignment */ if (addr & 0xF) @@ -2862,8 +2873,12 @@ int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *adapter, u64 addr, QLCNIC_TA_WRITE_START); for (j = 0; j < MAX_CTL_CHECK; j++) { - temp = qlcnic_83xx_rd_reg_indirect(adapter, - QLCNIC_MS_CTRL); + temp = QLCRD32(adapter, QLCNIC_MS_CTRL, &err); + if (err == -EIO) { + mutex_unlock(&adapter->ahw->mem_lock); + return err; + } + if ((temp & TA_CTL_BUSY) == 0) break; } @@ -2885,9 +2900,9 @@ int qlcnic_83xx_ms_mem_write128(struct qlcnic_adapter *adapter, u64 addr, int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, u8 *p_data, int count) { - int i, ret; - u32 word, addr = flash_addr; + u32 word, addr = flash_addr, ret; ulong indirect_addr; + int i, err = 0; if (qlcnic_83xx_lock_flash(adapter) != 0) return -EIO; @@ -2907,10 +2922,10 @@ int qlcnic_83xx_flash_read32(struct qlcnic_adapter *adapter, u32 flash_addr, } indirect_addr = QLC_83XX_FLASH_DIRECT_DATA(addr); - ret = qlcnic_83xx_rd_reg_indirect(adapter, - indirect_addr); - if (ret == -EIO) - return -EIO; + ret = QLCRD32(adapter, indirect_addr, &err); + if (err == -EIO) + return err; + word = ret; *(u32 *)p_data = word; p_data = p_data + 4; @@ -3376,7 +3391,8 @@ int qlcnic_83xx_set_pauseparam(struct qlcnic_adapter *adapter, static int qlcnic_83xx_read_flash_status_reg(struct qlcnic_adapter *adapter) { - int ret; + int ret, err = 0; + u32 temp; qlcnic_83xx_wrt_reg_indirect(adapter, QLC_83XX_FLASH_ADDR, QLC_83XX_FLASH_OEM_READ_SIG); @@ -3386,8 +3402,11 @@ static int qlcnic_83xx_read_flash_status_reg(struct qlcnic_adapter *adapter) if (ret) return -EIO; - ret = qlcnic_83xx_rd_reg_indirect(adapter, QLC_83XX_FLASH_RDDATA); - return ret & 0xFF; + temp = QLCRD32(adapter, QLC_83XX_FLASH_RDDATA, &err); + if (err == -EIO) + return err; + + return temp & 0xFF; } int qlcnic_83xx_flash_test(struct qlcnic_adapter *adapter) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 2548d1403d75..272f56a2e14b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -508,7 +508,7 @@ void qlcnic_83xx_add_sysfs(struct qlcnic_adapter *); void qlcnic_83xx_remove_sysfs(struct qlcnic_adapter *); void qlcnic_83xx_write_crb(struct qlcnic_adapter *, char *, loff_t, size_t); void qlcnic_83xx_read_crb(struct qlcnic_adapter *, char *, loff_t, size_t); -int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *, ulong); +int qlcnic_83xx_rd_reg_indirect(struct qlcnic_adapter *, ulong, int *); int qlcnic_83xx_wrt_reg_indirect(struct qlcnic_adapter *, ulong, u32); void qlcnic_83xx_process_rcv_diag(struct qlcnic_adapter *, int, u64 []); int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *, u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 51ab4b56fc91..9f4b8d5f0865 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1303,8 +1303,11 @@ static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) { int i, j; u32 val = 0, val1 = 0, reg = 0; + int err = 0; - val = QLCRD32(adapter, QLC_83XX_SRE_SHIM_REG); + val = QLCRD32(adapter, QLC_83XX_SRE_SHIM_REG, &err); + if (err == -EIO) + return; dev_info(&adapter->pdev->dev, "SRE-Shim Ctrl:0x%x\n", val); for (j = 0; j < 2; j++) { @@ -1318,7 +1321,9 @@ static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) reg = QLC_83XX_PORT1_THRESHOLD; } for (i = 0; i < 8; i++) { - val = QLCRD32(adapter, reg + (i * 0x4)); + val = QLCRD32(adapter, reg + (i * 0x4), &err); + if (err == -EIO) + return; dev_info(&adapter->pdev->dev, "0x%x ", val); } dev_info(&adapter->pdev->dev, "\n"); @@ -1335,8 +1340,10 @@ static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) reg = QLC_83XX_PORT1_TC_MC_REG; } for (i = 0; i < 4; i++) { - val = QLCRD32(adapter, reg + (i * 0x4)); - dev_info(&adapter->pdev->dev, "0x%x ", val); + val = QLCRD32(adapter, reg + (i * 0x4), &err); + if (err == -EIO) + return; + dev_info(&adapter->pdev->dev, "0x%x ", val); } dev_info(&adapter->pdev->dev, "\n"); } @@ -1352,17 +1359,25 @@ static void qlcnic_83xx_dump_pause_control_regs(struct qlcnic_adapter *adapter) reg = QLC_83XX_PORT1_TC_STATS; } for (i = 7; i >= 0; i--) { - val = QLCRD32(adapter, reg); + val = QLCRD32(adapter, reg, &err); + if (err == -EIO) + return; val &= ~(0x7 << 29); /* Reset bits 29 to 31 */ QLCWR32(adapter, reg, (val | (i << 29))); - val = QLCRD32(adapter, reg); + val = QLCRD32(adapter, reg, &err); + if (err == -EIO) + return; dev_info(&adapter->pdev->dev, "0x%x ", val); } dev_info(&adapter->pdev->dev, "\n"); } - val = QLCRD32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD); - val1 = QLCRD32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD); + val = QLCRD32(adapter, QLC_83XX_PORT2_IFB_THRESHOLD, &err); + if (err == -EIO) + return; + val1 = QLCRD32(adapter, QLC_83XX_PORT3_IFB_THRESHOLD, &err); + if (err == -EIO) + return; dev_info(&adapter->pdev->dev, "IFB-Pause Thresholds: Port 2:0x%x, Port 3:0x%x\n", val, val1); @@ -1425,7 +1440,7 @@ static void qlcnic_83xx_take_eport_out_of_reset(struct qlcnic_adapter *adapter) static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev) { u32 heartbeat, peg_status; - int retries, ret = -EIO; + int retries, ret = -EIO, err = 0; retries = QLCNIC_HEARTBEAT_CHECK_RETRY_COUNT; p_dev->heartbeat = QLC_SHARED_REG_RD32(p_dev, @@ -1453,11 +1468,11 @@ static int qlcnic_83xx_check_heartbeat(struct qlcnic_adapter *p_dev) "PEG_NET_2_PC: 0x%x, PEG_NET_3_PC: 0x%x,\n" "PEG_NET_4_PC: 0x%x\n", peg_status, QLC_SHARED_REG_RD32(p_dev, QLCNIC_PEG_HALT_STATUS2), - QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_0), - QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_1), - QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_2), - QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_3), - QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_4)); + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_0, &err), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_1, &err), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_2, &err), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_3, &err), + QLCRD32(p_dev, QLC_83XX_CRB_PEG_NET_4, &err)); if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) dev_err(&p_dev->pdev->dev, @@ -1501,18 +1516,22 @@ int qlcnic_83xx_check_hw_status(struct qlcnic_adapter *p_dev) static int qlcnic_83xx_poll_reg(struct qlcnic_adapter *p_dev, u32 addr, int duration, u32 mask, u32 status) { + int timeout_error, err = 0; u32 value; - int timeout_error; u8 retries; - value = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + value = QLCRD32(p_dev, addr, &err); + if (err == -EIO) + return err; retries = duration / 10; do { if ((value & mask) != status) { timeout_error = 1; msleep(duration / 10); - value = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + value = QLCRD32(p_dev, addr, &err); + if (err == -EIO) + return err; } else { timeout_error = 0; break; @@ -1606,9 +1625,12 @@ int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_dev) static void qlcnic_83xx_read_write_crb_reg(struct qlcnic_adapter *p_dev, u32 raddr, u32 waddr) { - int value; + int err = 0; + u32 value; - value = qlcnic_83xx_rd_reg_indirect(p_dev, raddr); + value = QLCRD32(p_dev, raddr, &err); + if (err == -EIO) + return; qlcnic_83xx_wrt_reg_indirect(p_dev, waddr, value); } @@ -1617,12 +1639,16 @@ static void qlcnic_83xx_rmw_crb_reg(struct qlcnic_adapter *p_dev, u32 raddr, u32 waddr, struct qlc_83xx_rmw *p_rmw_hdr) { - int value; + int err = 0; + u32 value; - if (p_rmw_hdr->index_a) + if (p_rmw_hdr->index_a) { value = p_dev->ahw->reset.array[p_rmw_hdr->index_a]; - else - value = qlcnic_83xx_rd_reg_indirect(p_dev, raddr); + } else { + value = QLCRD32(p_dev, raddr, &err); + if (err == -EIO) + return; + } value &= p_rmw_hdr->mask; value <<= p_rmw_hdr->shl; @@ -1675,7 +1701,7 @@ static void qlcnic_83xx_poll_list(struct qlcnic_adapter *p_dev, long delay; struct qlc_83xx_entry *entry; struct qlc_83xx_poll *poll; - int i; + int i, err = 0; unsigned long arg1, arg2; poll = (struct qlc_83xx_poll *)((char *)p_hdr + @@ -1699,10 +1725,12 @@ static void qlcnic_83xx_poll_list(struct qlcnic_adapter *p_dev, arg1, delay, poll->mask, poll->status)){ - qlcnic_83xx_rd_reg_indirect(p_dev, - arg1); - qlcnic_83xx_rd_reg_indirect(p_dev, - arg2); + QLCRD32(p_dev, arg1, &err); + if (err == -EIO) + return; + QLCRD32(p_dev, arg2, &err); + if (err == -EIO) + return; } } } @@ -1768,7 +1796,7 @@ static void qlcnic_83xx_poll_read_list(struct qlcnic_adapter *p_dev, struct qlc_83xx_entry_hdr *p_hdr) { long delay; - int index, i, j; + int index, i, j, err; struct qlc_83xx_quad_entry *entry; struct qlc_83xx_poll *poll; unsigned long addr; @@ -1788,7 +1816,10 @@ static void qlcnic_83xx_poll_read_list(struct qlcnic_adapter *p_dev, poll->mask, poll->status)){ index = p_dev->ahw->reset.array_index; addr = entry->dr_addr; - j = qlcnic_83xx_rd_reg_indirect(p_dev, addr); + j = QLCRD32(p_dev, addr, &err); + if (err == -EIO) + return; + p_dev->ahw->reset.array[index++] = j; if (index == QLC_83XX_MAX_RESET_SEQ_ENTRIES) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index 8d401babd491..d09389b33474 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -104,7 +104,7 @@ static u32 qlcnic_poll_rsp(struct qlcnic_adapter *adapter) { u32 rsp; - int timeout = 0; + int timeout = 0, err = 0; do { /* give atleast 1ms for firmware to respond */ @@ -113,7 +113,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) return QLCNIC_CDRP_RSP_TIMEOUT; - rsp = QLCRD32(adapter, QLCNIC_CDRP_CRB_OFFSET); + rsp = QLCRD32(adapter, QLCNIC_CDRP_CRB_OFFSET, &err); } while (!QLCNIC_CDRP_IS_RSP(rsp)); return rsp; @@ -122,7 +122,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, struct qlcnic_cmd_args *cmd) { - int i; + int i, err = 0; u32 rsp; u32 signature; struct pci_dev *pdev = adapter->pdev; @@ -148,7 +148,7 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, dev_err(&pdev->dev, "card response timeout.\n"); cmd->rsp.arg[0] = QLCNIC_RCODE_TIMEOUT; } else if (rsp == QLCNIC_CDRP_RSP_FAIL) { - cmd->rsp.arg[0] = QLCRD32(adapter, QLCNIC_CDRP_ARG(1)); + cmd->rsp.arg[0] = QLCRD32(adapter, QLCNIC_CDRP_ARG(1), &err); switch (cmd->rsp.arg[0]) { case QLCNIC_RCODE_INVALID_ARGS: fmt = "CDRP invalid args: [%d]\n"; @@ -175,7 +175,7 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter, cmd->rsp.arg[0] = QLCNIC_RCODE_SUCCESS; for (i = 1; i < cmd->rsp.num; i++) - cmd->rsp.arg[i] = QLCRD32(adapter, QLCNIC_CDRP_ARG(i)); + cmd->rsp.arg[i] = QLCRD32(adapter, QLCNIC_CDRP_ARG(i), &err); /* Release semaphore */ qlcnic_api_unlock(adapter); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index ac42cde47888..7aac23ab31d1 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -267,7 +267,7 @@ int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, { struct qlcnic_hardware_context *ahw = adapter->ahw; u32 speed, reg; - int check_sfp_module = 0; + int check_sfp_module = 0, err = 0; u16 pcifn = ahw->pci_func; /* read which mode */ @@ -290,7 +290,7 @@ int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, } else if (adapter->ahw->port_type == QLCNIC_XGBE) { u32 val = 0; - val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR); + val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR, &err); if (val == QLCNIC_PORT_MODE_802_3_AP) { ecmd->supported = SUPPORTED_1000baseT_Full; @@ -303,7 +303,7 @@ int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter, if (netif_running(adapter->netdev) && ahw->has_link_events) { if (ahw->linkup) { reg = QLCRD32(adapter, - P3P_LINK_SPEED_REG(pcifn)); + P3P_LINK_SPEED_REG(pcifn), &err); speed = P3P_LINK_SPEED_VAL(pcifn, reg); ahw->link_speed = speed * P3P_LINK_SPEED_MHZ; } @@ -468,13 +468,14 @@ static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) static int qlcnic_82xx_get_registers(struct qlcnic_adapter *adapter, u32 *regs_buff) { - int i, j = 0; + int i, j = 0, err = 0; for (i = QLCNIC_DEV_INFO_SIZE + 1; diag_registers[j] != -1; j++, i++) regs_buff[i] = QLC_SHARED_REG_RD32(adapter, diag_registers[j]); j = 0; while (ext_diag_registers[j] != -1) - regs_buff[i++] = QLCRD32(adapter, ext_diag_registers[j++]); + regs_buff[i++] = QLCRD32(adapter, ext_diag_registers[j++], + &err); return i; } @@ -524,13 +525,16 @@ qlcnic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) static u32 qlcnic_test_link(struct net_device *dev) { struct qlcnic_adapter *adapter = netdev_priv(dev); + int err = 0; u32 val; if (qlcnic_83xx_check(adapter)) { val = qlcnic_83xx_test_link(adapter); return (val & 1) ? 0 : 1; } - val = QLCRD32(adapter, CRB_XG_STATE_P3P); + val = QLCRD32(adapter, CRB_XG_STATE_P3P, &err); + if (err == -EIO) + return err; val = XG_LINK_STATE_P3P(adapter->ahw->pci_func, val); return (val == XG_LINK_UP_P3P) ? 0 : 1; } @@ -663,6 +667,7 @@ qlcnic_get_pauseparam(struct net_device *netdev, { struct qlcnic_adapter *adapter = netdev_priv(netdev); int port = adapter->ahw->physical_port; + int err = 0; __u32 val; if (qlcnic_83xx_check(adapter)) { @@ -673,9 +678,13 @@ qlcnic_get_pauseparam(struct net_device *netdev, if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) return; /* get flow control settings */ - val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port)); + val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), &err); + if (err == -EIO) + return; pause->rx_pause = qlcnic_gb_get_rx_flowctl(val); - val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL); + val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, &err); + if (err == -EIO) + return; switch (port) { case 0: pause->tx_pause = !(qlcnic_gb_get_gb0_mask(val)); @@ -695,7 +704,9 @@ qlcnic_get_pauseparam(struct net_device *netdev, if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS)) return; pause->rx_pause = 1; - val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL); + val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, &err); + if (err == -EIO) + return; if (port == 0) pause->tx_pause = !(qlcnic_xg_get_xg0_mask(val)); else @@ -712,6 +723,7 @@ qlcnic_set_pauseparam(struct net_device *netdev, { struct qlcnic_adapter *adapter = netdev_priv(netdev); int port = adapter->ahw->physical_port; + int err = 0; __u32 val; if (qlcnic_83xx_check(adapter)) @@ -722,7 +734,9 @@ qlcnic_set_pauseparam(struct net_device *netdev, if ((port < 0) || (port > QLCNIC_NIU_MAX_GBE_PORTS)) return -EIO; /* set flow control */ - val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port)); + val = QLCRD32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), &err); + if (err == -EIO) + return err; if (pause->rx_pause) qlcnic_gb_rx_flowctl(val); @@ -733,7 +747,9 @@ qlcnic_set_pauseparam(struct net_device *netdev, val); QLCWR32(adapter, QLCNIC_NIU_GB_MAC_CONFIG_0(port), val); /* set autoneg */ - val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL); + val = QLCRD32(adapter, QLCNIC_NIU_GB_PAUSE_CTL, &err); + if (err == -EIO) + return err; switch (port) { case 0: if (pause->tx_pause) @@ -769,7 +785,9 @@ qlcnic_set_pauseparam(struct net_device *netdev, if ((port < 0) || (port > QLCNIC_NIU_MAX_XG_PORTS)) return -EIO; - val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL); + val = QLCRD32(adapter, QLCNIC_NIU_XG_PAUSE_CTL, &err); + if (err == -EIO) + return err; if (port == 0) { if (pause->tx_pause) qlcnic_xg_unset_xg0_mask(val); @@ -793,11 +811,14 @@ static int qlcnic_reg_test(struct net_device *dev) { struct qlcnic_adapter *adapter = netdev_priv(dev); u32 data_read; + int err = 0; if (qlcnic_83xx_check(adapter)) return qlcnic_83xx_reg_test(adapter); - data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0)); + data_read = QLCRD32(adapter, QLCNIC_PCIX_PH_REG(0), &err); + if (err == -EIO) + return err; if ((data_read & 0xffff) != adapter->pdev->vendor) return 1; @@ -1269,17 +1290,20 @@ qlcnic_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct qlcnic_adapter *adapter = netdev_priv(dev); u32 wol_cfg; + int err = 0; if (qlcnic_83xx_check(adapter)) return; wol->supported = 0; wol->wolopts = 0; - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV, &err); + if (err == -EIO) + return; if (wol_cfg & (1UL << adapter->portnum)) wol->supported |= WAKE_MAGIC; - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG, &err); if (wol_cfg & (1UL << adapter->portnum)) wol->wolopts |= WAKE_MAGIC; } @@ -1289,17 +1313,22 @@ qlcnic_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct qlcnic_adapter *adapter = netdev_priv(dev); u32 wol_cfg; + int err = 0; if (qlcnic_83xx_check(adapter)) return -EOPNOTSUPP; if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV, &err); + if (err == -EIO) + return err; if (!(wol_cfg & (1 << adapter->portnum))) return -EOPNOTSUPP; - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG, &err); + if (err == -EIO) + return err; if (wol->wolopts & WAKE_MAGIC) wol_cfg |= 1UL << adapter->portnum; else diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c index 4ed7e73d88d3..4d5f59b2d153 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c @@ -317,16 +317,20 @@ static void qlcnic_write_window_reg(u32 addr, void __iomem *bar0, u32 data) int qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg) { - int done = 0, timeout = 0; + int timeout = 0; + int err = 0; + u32 done = 0; while (!done) { - done = QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_LOCK(sem))); + done = QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_LOCK(sem)), + &err); if (done == 1) break; if (++timeout >= QLCNIC_PCIE_SEM_TIMEOUT) { dev_err(&adapter->pdev->dev, "Failed to acquire sem=%d lock; holdby=%d\n", - sem, id_reg ? QLCRD32(adapter, id_reg) : -1); + sem, + id_reg ? QLCRD32(adapter, id_reg, &err) : -1); return -EIO; } msleep(1); @@ -341,19 +345,22 @@ qlcnic_pcie_sem_lock(struct qlcnic_adapter *adapter, int sem, u32 id_reg) void qlcnic_pcie_sem_unlock(struct qlcnic_adapter *adapter, int sem) { - QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_UNLOCK(sem))); + int err = 0; + + QLCRD32(adapter, QLCNIC_PCIE_REG(PCIE_SEM_UNLOCK(sem)), &err); } int qlcnic_ind_rd(struct qlcnic_adapter *adapter, u32 addr) { + int err = 0; u32 data; if (qlcnic_82xx_check(adapter)) qlcnic_read_window_reg(addr, adapter->ahw->pci_base0, &data); else { - data = qlcnic_83xx_rd_reg_indirect(adapter, addr); - if (data == -EIO) - return -EIO; + data = QLCRD32(adapter, addr, &err); + if (err == -EIO) + return err; } return data; } @@ -1159,7 +1166,8 @@ int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *adapter, ulong off, return -EIO; } -int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off) +int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off, + int *err) { unsigned long flags; int rv; @@ -1415,7 +1423,7 @@ int qlcnic_pci_mem_read_2M(struct qlcnic_adapter *adapter, u64 off, u64 *data) int qlcnic_82xx_get_board_info(struct qlcnic_adapter *adapter) { - int offset, board_type, magic; + int offset, board_type, magic, err = 0; struct pci_dev *pdev = adapter->pdev; offset = QLCNIC_FW_MAGIC_OFFSET; @@ -1435,7 +1443,9 @@ int qlcnic_82xx_get_board_info(struct qlcnic_adapter *adapter) adapter->ahw->board_type = board_type; if (board_type == QLCNIC_BRDTYPE_P3P_4_GB_MM) { - u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I); + u32 gpio = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_PAD_GPIO_I, &err); + if (err == -EIO) + return err; if ((gpio & 0x8000) == 0) board_type = QLCNIC_BRDTYPE_P3P_10G_TP; } @@ -1475,10 +1485,13 @@ int qlcnic_wol_supported(struct qlcnic_adapter *adapter) { u32 wol_cfg; + int err = 0; - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG_NV, &err); if (wol_cfg & (1UL << adapter->portnum)) { - wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG); + wol_cfg = QLCRD32(adapter, QLCNIC_WOL_CONFIG, &err); + if (err == -EIO) + return err; if (wol_cfg & (1 << adapter->portnum)) return 1; } @@ -1539,6 +1552,7 @@ void qlcnic_82xx_get_func_no(struct qlcnic_adapter *adapter) void qlcnic_82xx_read_crb(struct qlcnic_adapter *adapter, char *buf, loff_t offset, size_t size) { + int err = 0; u32 data; u64 qmdata; @@ -1546,7 +1560,7 @@ void qlcnic_82xx_read_crb(struct qlcnic_adapter *adapter, char *buf, qlcnic_pci_camqm_read_2M(adapter, offset, &qmdata); memcpy(buf, &qmdata, size); } else { - data = QLCRD32(adapter, offset); + data = QLCRD32(adapter, offset, &err); memcpy(buf, &data, size); } } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h index 2c22504f57aa..4a71b28effcb 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h @@ -154,7 +154,7 @@ struct qlcnic_hardware_context; struct qlcnic_adapter; int qlcnic_82xx_start_firmware(struct qlcnic_adapter *); -int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong); +int qlcnic_82xx_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong, int *); int qlcnic_82xx_hw_write_wx_2M(struct qlcnic_adapter *, ulong, u32); int qlcnic_82xx_config_hw_lro(struct qlcnic_adapter *adapter, int); int qlcnic_82xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32); diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index a2023090e866..974d62607e13 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -286,10 +286,11 @@ static int qlcnic_wait_rom_done(struct qlcnic_adapter *adapter) { long timeout = 0; long done = 0; + int err = 0; cond_resched(); while (done == 0) { - done = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_STATUS); + done = QLCRD32(adapter, QLCNIC_ROMUSB_GLB_STATUS, &err); done &= 2; if (++timeout >= QLCNIC_MAX_ROM_WAIT_USEC) { dev_err(&adapter->pdev->dev, @@ -304,6 +305,8 @@ static int qlcnic_wait_rom_done(struct qlcnic_adapter *adapter) static int do_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp) { + int err = 0; + QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ADDRESS, addr); QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); QLCWR32(adapter, QLCNIC_ROMUSB_ROM_ABYTE_CNT, 3); @@ -317,7 +320,9 @@ static int do_rom_fast_read(struct qlcnic_adapter *adapter, udelay(10); QLCWR32(adapter, QLCNIC_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); - *valp = QLCRD32(adapter, QLCNIC_ROMUSB_ROM_RDATA); + *valp = QLCRD32(adapter, QLCNIC_ROMUSB_ROM_RDATA, &err); + if (err == -EIO) + return err; return 0; } @@ -369,11 +374,11 @@ int qlcnic_rom_fast_read(struct qlcnic_adapter *adapter, u32 addr, u32 *valp) int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter) { - int addr, val; + int addr, err = 0; int i, n, init_delay; struct crb_addr_pair *buf; unsigned offset; - u32 off; + u32 off, val; struct pci_dev *pdev = adapter->pdev; QLC_SHARED_REG_WR32(adapter, QLCNIC_CMDPEG_STATE, 0); @@ -402,7 +407,9 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter) QLCWR32(adapter, QLCNIC_CRB_NIU + 0xb0000, 0x00); /* halt sre */ - val = QLCRD32(adapter, QLCNIC_CRB_SRE + 0x1000); + val = QLCRD32(adapter, QLCNIC_CRB_SRE + 0x1000, &err); + if (err == -EIO) + return err; QLCWR32(adapter, QLCNIC_CRB_SRE + 0x1000, val & (~(0x1))); /* halt epg */ @@ -719,10 +726,12 @@ qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter) static int qlcnic_has_mn(struct qlcnic_adapter *adapter) { - u32 capability; - capability = 0; + u32 capability = 0; + int err = 0; - capability = QLCRD32(adapter, QLCNIC_PEG_TUNE_CAPABILITY); + capability = QLCRD32(adapter, QLCNIC_PEG_TUNE_CAPABILITY, &err); + if (err == -EIO) + return err; if (capability & QLCNIC_PEG_TUNE_MN_PRESENT) return 1; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index a849446da7c9..ee013fcc3322 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -977,8 +977,8 @@ qlcnic_check_options(struct qlcnic_adapter *adapter) static int qlcnic_initialize_nic(struct qlcnic_adapter *adapter) { - int err; struct qlcnic_info nic_info; + int err = 0; memset(&nic_info, 0, sizeof(struct qlcnic_info)); err = qlcnic_get_nic_info(adapter, &nic_info, adapter->ahw->pci_func); @@ -993,7 +993,9 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) if (adapter->ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) { u32 temp; - temp = QLCRD32(adapter, CRB_FW_CAPABILITIES_2); + temp = QLCRD32(adapter, CRB_FW_CAPABILITIES_2, &err); + if (err == -EIO) + return err; adapter->ahw->extra_capability[0] = temp; } adapter->ahw->max_mac_filters = nic_info.max_mac_filters; @@ -3095,6 +3097,7 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) { u32 state = 0, heartbeat; u32 peg_status; + int err = 0; if (qlcnic_check_temp(adapter)) goto detach; @@ -3141,11 +3144,11 @@ qlcnic_check_health(struct qlcnic_adapter *adapter) "PEG_NET_4_PC: 0x%x\n", peg_status, QLC_SHARED_REG_RD32(adapter, QLCNIC_PEG_HALT_STATUS2), - QLCRD32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x3c), - QLCRD32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x3c), - QLCRD32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x3c), - QLCRD32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c), - QLCRD32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c)); + QLCRD32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x3c, &err), + QLCRD32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x3c, &err), + QLCRD32(adapter, QLCNIC_CRB_PEG_NET_2 + 0x3c, &err), + QLCRD32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x3c, &err), + QLCRD32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c, &err)); if (QLCNIC_FWERROR_CODE(peg_status) == 0x67) dev_err(&adapter->pdev->dev, "Firmware aborted with error code 0x00006700. " -- cgit v1.2.3 From 136d8f377e1575463b47840bc5f1b22d94bf8f63 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sun, 4 Aug 2013 17:22:34 -0700 Subject: skge: add dma_mapping check This old driver never checked for DMA mapping errors. Causing splats with the new DMA mapping checks: WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x930() skge 0000:01:09.0: DMA-API: device driver failed to check map Add checks and unwind code. Reported-by: poma Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 48 ++++++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index c896079728e1..008cfa3173e6 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -931,15 +931,18 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u32 base) } /* Allocate and setup a new buffer for receiving */ -static void skge_rx_setup(struct skge_port *skge, struct skge_element *e, - struct sk_buff *skb, unsigned int bufsize) +static int skge_rx_setup(struct skge_port *skge, struct skge_element *e, + struct sk_buff *skb, unsigned int bufsize) { struct skge_rx_desc *rd = e->desc; - u64 map; + dma_addr_t map; map = pci_map_single(skge->hw->pdev, skb->data, bufsize, PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(skge->hw->pdev, map)) + return -1; + rd->dma_lo = map; rd->dma_hi = map >> 32; e->skb = skb; @@ -953,6 +956,7 @@ static void skge_rx_setup(struct skge_port *skge, struct skge_element *e, rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, bufsize); + return 0; } /* Resume receiving using existing skb, @@ -1014,7 +1018,10 @@ static int skge_rx_fill(struct net_device *dev) return -ENOMEM; skb_reserve(skb, NET_IP_ALIGN); - skge_rx_setup(skge, e, skb, skge->rx_buf_size); + if (skge_rx_setup(skge, e, skb, skge->rx_buf_size) < 0) { + dev_kfree_skb(skb); + return -EIO; + } } while ((e = e->next) != ring->start); ring->to_clean = ring->start; @@ -2729,7 +2736,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, struct skge_tx_desc *td; int i; u32 control, len; - u64 map; + dma_addr_t map; if (skb_padto(skb, ETH_ZLEN)) return NETDEV_TX_OK; @@ -2743,6 +2750,9 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, e->skb = skb; len = skb_headlen(skb); map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(hw->pdev, map)) + goto mapping_error; + dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, len); @@ -2778,6 +2788,8 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, map = skb_frag_dma_map(&hw->pdev->dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE); + if (dma_mapping_error(&hw->pdev->dev, map)) + goto mapping_unwind; e = e->next; e->skb = skb; @@ -2815,6 +2827,26 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, } return NETDEV_TX_OK; + +mapping_unwind: + e = skge->tx_ring.to_use; + pci_unmap_single(hw->pdev, + dma_unmap_addr(e, mapaddr), + dma_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + while (i-- > 0) { + e = e->next; + pci_unmap_page(hw->pdev, + dma_unmap_addr(e, mapaddr), + dma_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + } + +mapping_error: + if (net_ratelimit()) + dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name); + dev_kfree_skb(skb); + return NETDEV_TX_OK; } @@ -3058,13 +3090,17 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, if (!nskb) goto resubmit; + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); } skb_put(skb, len); -- cgit v1.2.3 From f7b7a365331deb4553944a0b695dd6371614053a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 4 Aug 2013 20:40:34 -0700 Subject: skge: fix build on 32 bit The following is needed as well to fix warning/error about shifting a 32 bit value 32 bits which occurs if building on 32 bit platform caused by conversion to using dma_addr_t Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 008cfa3173e6..3f78336bab2c 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -943,8 +943,8 @@ static int skge_rx_setup(struct skge_port *skge, struct skge_element *e, if (pci_dma_mapping_error(skge->hw->pdev, map)) return -1; - rd->dma_lo = map; - rd->dma_hi = map >> 32; + rd->dma_lo = lower_32_bits(map); + rd->dma_hi = upper_32_bits(map); e->skb = skb; rd->csum1_start = ETH_HLEN; rd->csum2_start = ETH_HLEN; @@ -2551,7 +2551,7 @@ static int skge_up(struct net_device *dev) BUG_ON(skge->dma & 7); - if ((u64)skge->dma >> 32 != ((u64) skge->dma + skge->mem_size) >> 32) { + if (upper_32_bits(skge->dma) != upper_32_bits(skge->dma + skge->mem_size)) { dev_err(&hw->pdev->dev, "pci_alloc_consistent region crosses 4G boundary\n"); err = -EINVAL; goto free_pci_mem; @@ -2756,8 +2756,8 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, len); - td->dma_lo = map; - td->dma_hi = map >> 32; + td->dma_lo = lower_32_bits(map); + td->dma_hi = upper_32_bits(map); if (skb->ip_summed == CHECKSUM_PARTIAL) { const int offset = skb_checksum_start_offset(skb); @@ -2796,8 +2796,8 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb, tf = e->desc; BUG_ON(tf->control & BMU_OWN); - tf->dma_lo = map; - tf->dma_hi = (u64) map >> 32; + tf->dma_lo = lower_32_bits(map); + tf->dma_hi = upper_32_bits(map); dma_unmap_addr_set(e, mapaddr, map); dma_unmap_len_set(e, maplen, skb_frag_size(frag)); -- cgit v1.2.3 From 1512747820367c8b3b8b72035f0f78c62f2bf1e9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 5 Aug 2013 18:25:54 +0300 Subject: macvlan: validate flags commit df8ef8f3aaa6692970a436204c4429210addb23a macvlan: add FDB bridge ops and macvlan flags added a flags field to macvlan, which can be controlled from userspace. The idea is to make the interface future-proof so we can add flags and not new fields. However, flags value isn't validated, as a result, userspace can't detect which flags are supported. Cc: "David S. Miller" Cc: John Fastabend Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index d0f9c2fd1d4f..16b43bf544b7 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -739,6 +739,10 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[]) return -EADDRNOTAVAIL; } + if (data && data[IFLA_MACVLAN_FLAGS] && + nla_get_u16(data[IFLA_MACVLAN_FLAGS]) & ~MACVLAN_FLAG_NOPROMISC) + return -EINVAL; + if (data && data[IFLA_MACVLAN_MODE]) { switch (nla_get_u32(data[IFLA_MACVLAN_MODE])) { case MACVLAN_MODE_PRIVATE: -- cgit v1.2.3 From 7d46daba8dd5df1aa45724518a041ef7163d3ad5 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 5 Aug 2013 16:05:32 +0300 Subject: mlx5: remove health handler plugin Remove this code, per Dave Miller's request, since it is not being used anywhere in the kernel. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/health.c | 29 +----------------------- include/linux/mlx5/driver.h | 3 --- 2 files changed, 1 insertion(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c index 748f10a155c4..3e6670c4a7cd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/health.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c @@ -55,33 +55,9 @@ enum { }; static DEFINE_SPINLOCK(health_lock); - static LIST_HEAD(health_list); static struct work_struct health_work; -static health_handler_t reg_handler; -int mlx5_register_health_report_handler(health_handler_t handler) -{ - spin_lock_irq(&health_lock); - if (reg_handler) { - spin_unlock_irq(&health_lock); - return -EEXIST; - } - reg_handler = handler; - spin_unlock_irq(&health_lock); - - return 0; -} -EXPORT_SYMBOL(mlx5_register_health_report_handler); - -void mlx5_unregister_health_report_handler(void) -{ - spin_lock_irq(&health_lock); - reg_handler = NULL; - spin_unlock_irq(&health_lock); -} -EXPORT_SYMBOL(mlx5_unregister_health_report_handler); - static void health_care(struct work_struct *work) { struct mlx5_core_health *health, *n; @@ -98,11 +74,8 @@ static void health_care(struct work_struct *work) priv = container_of(health, struct mlx5_priv, health); dev = container_of(priv, struct mlx5_core_dev, priv); mlx5_core_warn(dev, "handling bad device here\n"); + /* nothing yet */ spin_lock_irq(&health_lock); - if (reg_handler) - reg_handler(dev->pdev, health->health, - sizeof(health->health)); - list_del_init(&health->list); spin_unlock_irq(&health_lock); } diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 2aa258b0ced1..611e65e76b00 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -731,9 +731,6 @@ void mlx5_cq_debugfs_cleanup(struct mlx5_core_dev *dev); int mlx5_db_alloc(struct mlx5_core_dev *dev, struct mlx5_db *db); void mlx5_db_free(struct mlx5_core_dev *dev, struct mlx5_db *db); -typedef void (*health_handler_t)(struct pci_dev *pdev, struct health_buffer __iomem *buf, int size); -int mlx5_register_health_report_handler(health_handler_t handler); -void mlx5_unregister_health_report_handler(void); const char *mlx5_command_str(int command); int mlx5_cmdif_debugfs_init(struct mlx5_core_dev *dev); void mlx5_cmdif_debugfs_cleanup(struct mlx5_core_dev *dev); -- cgit v1.2.3 From 5a6e0cf70743f30c17ccb5f228db9a124b0e7477 Mon Sep 17 00:00:00 2001 From: Solomon Peachy Date: Fri, 2 Aug 2013 19:57:40 -0400 Subject: cw1200: Fix spurious BUG_ON() trigger when starting AP mode. There's an underlying race condition with the unjoin_work() call that is sometimes triggered depending on scheduling order and the phase of the moon. This doesn't fix the race condition, but it does remove the ill-advised BUG_ON() call in an easily-recoverable situation. Signed-off-by: Solomon Peachy Signed-off-by: John W. Linville --- drivers/net/wireless/cw1200/sta.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c index 7365674366f4..010b252be584 100644 --- a/drivers/net/wireless/cw1200/sta.c +++ b/drivers/net/wireless/cw1200/sta.c @@ -1406,11 +1406,8 @@ static void cw1200_do_unjoin(struct cw1200_common *priv) if (!priv->join_status) goto done; - if (priv->join_status > CW1200_JOIN_STATUS_IBSS) { - wiphy_err(priv->hw->wiphy, "Unexpected: join status: %d\n", - priv->join_status); - BUG_ON(1); - } + if (priv->join_status == CW1200_JOIN_STATUS_AP) + goto done; cancel_work_sync(&priv->update_filtering_work); cancel_work_sync(&priv->set_beacon_wakeup_period_work); -- cgit v1.2.3 From 3b380877d58604686c2526c19154d656c25d2953 Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Fri, 2 Aug 2013 19:07:39 +0200 Subject: bonding: modify only neigh_parms owned by us Otherwise, on neighbour creation, bond_neigh_init() will be called with a foreign netdev. Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 07f257d44a1e..e48cb339c0c6 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3714,11 +3714,17 @@ static int bond_neigh_init(struct neighbour *n) * The bonding ndo_neigh_setup is called at init time beofre any * slave exists. So we must declare proxy setup function which will * be used at run time to resolve the actual slave neigh param setup. + * + * It's also called by master devices (such as vlans) to setup their + * underlying devices. In that case - do nothing, we're already set up from + * our init. */ static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms) { - parms->neigh_setup = bond_neigh_init; + /* modify only our neigh_parms */ + if (parms->dev == dev) + parms->neigh_setup = bond_neigh_init; return 0; } -- cgit v1.2.3 From d06f5187469eee1b2932c02fd093d113cfc60d5e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 9 Aug 2013 11:16:34 -0700 Subject: 8139cp: Fix skb leak in rx_status_loop failure path. Introduced in cf3c4c03060b688cbc389ebc5065ebcce5653e96 ("8139cp: Add dma_mapping_error checking") Signed-off-by: Dave Jones Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index 6f35f8404d68..d2e591955bdd 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -524,6 +524,7 @@ rx_status_loop: PCI_DMA_FROMDEVICE); if (dma_mapping_error(&cp->pdev->dev, new_mapping)) { dev->stats.rx_dropped++; + kfree_skb(new_skb); goto rx_next; } -- cgit v1.2.3 From 614334df2d6dcc5e15eaa8066a649535d50f329b Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 7 Aug 2013 16:35:45 +0800 Subject: vxlan: fix a regression of igmp join This is a regression introduced by: commit 3fc2de2faba387218bdf9dbc6b13f513ac3b060a Author: stephen hemminger Date: Thu Jul 18 08:40:15 2013 -0700 vxlan: fix igmp races Before this commit, the old code was: if (vxlan_group_used(vn, vxlan->default_dst.remote_ip)) ip_mc_join_group(sk, &mreq); else ip_mc_leave_group(sk, &mreq); therefore we shoud check vxlan_group_used(), not its opposite, for igmp_join. Cc: Stephen Hemminger Cc: David S. Miller Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f4c6db419ddb..11a6c03d202a 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1386,7 +1386,7 @@ static int vxlan_open(struct net_device *dev) return -ENOTCONN; if (IN_MULTICAST(ntohl(vxlan->default_dst.remote_ip)) && - ! vxlan_group_used(vn, vxlan->default_dst.remote_ip)) { + vxlan_group_used(vn, vxlan->default_dst.remote_ip)) { vxlan_sock_hold(vs); dev_hold(dev); queue_work(vxlan_wq, &vxlan->igmp_join); -- cgit v1.2.3 From ffbe4a539f69fa3e2f3be74627ca2c830f9d923b Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 7 Aug 2013 16:43:22 +0800 Subject: vxlan: fix a soft lockup in vxlan module removal This is a regression introduced by: commit fe5c3561e6f0ac7c9546209f01351113c1b77ec8 Author: stephen hemminger Date: Sat Jul 13 10:18:18 2013 -0700 vxlan: add necessary locking on device removal The problem is that vxlan_dellink(), which is called with RTNL lock held, tries to flush the workqueue synchronously, but apparently igmp_join and igmp_leave work need to hold RTNL lock too, therefore we have a soft lockup! As suggested by Stephen, probably the flush_workqueue can just be removed and let the normal refcounting work. The workqueue has a reference to device and socket, therefore the cleanups should work correctly. Suggested-by: Stephen Hemminger Cc: Stephen Hemminger Cc: David S. Miller Tested-by: Cong Wang Signed-off-by: Cong Wang Acked-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 11a6c03d202a..767f7af3bd40 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -1793,8 +1793,6 @@ static void vxlan_dellink(struct net_device *dev, struct list_head *head) struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); - flush_workqueue(vxlan_wq); - spin_lock(&vn->sock_lock); hlist_del_rcu(&vxlan->hlist); spin_unlock(&vn->sock_lock); -- cgit v1.2.3 From 21ff01931e47f247bfb235ca36565734daca1de8 Mon Sep 17 00:00:00 2001 From: Byungho An Date: Thu, 8 Aug 2013 15:30:26 +0900 Subject: net: stmmac: Fixed the condition of extend_desc for jumbo frame This patch fixed the condition of extend_desc for jumbo frame. There is no check routine for extend_desc in the stmmac_jumbo_frm function. Even though extend_desc is set if dma_tx is used instead of dma_etx. It causes kernel panic. Signed-off-by: Byungho An Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c index c9d942a5c335..1ef9d8a555aa 100644 --- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c +++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c @@ -33,10 +33,15 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) struct stmmac_priv *priv = (struct stmmac_priv *)p; unsigned int txsize = priv->dma_tx_size; unsigned int entry = priv->cur_tx % txsize; - struct dma_desc *desc = priv->dma_tx + entry; + struct dma_desc *desc; unsigned int nopaged_len = skb_headlen(skb); unsigned int bmax, len; + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; + if (priv->plat->enh_desc) bmax = BUF_SIZE_8KiB; else @@ -54,7 +59,11 @@ static unsigned int stmmac_jumbo_frm(void *p, struct sk_buff *skb, int csum) STMMAC_RING_MODE); wmb(); entry = (++priv->cur_tx) % txsize; - desc = priv->dma_tx + entry; + + if (priv->extend_desc) + desc = (struct dma_desc *)(priv->dma_etx + entry); + else + desc = priv->dma_tx + entry; desc->des2 = dma_map_single(priv->device, skb->data + bmax, len, DMA_TO_DEVICE); -- cgit v1.2.3 From 29d7919692e591c2f0e1f743a7f6c613c1266ece Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 8 Aug 2013 08:06:14 -0700 Subject: macvtap: fix two races Since commit ac4e4af1e59e1 ("macvtap: Consistently use rcu functions"), Thomas gets two different warnings : BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45891/45892 caller is macvtap_do_read+0x45c/0x600 [macvtap] CPU: 1 PID: 45892 Comm: vhost-45891 Not tainted 3.11.0-bisecttest #13 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bcec>] dump_stack+0x74/0xd8 [<0000000000481066>] debug_smp_processor_id+0xf6/0x114 [<000003ff802e9a18>] macvtap_do_read+0x45c/0x600 [macvtap] [<000003ff802e9c1c>] macvtap_recvmsg+0x60/0x88 [macvtap] [<000003ff80318c5e>] handle_rx+0x5b2/0x800 [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<00000000006934a6>] kernel_thread_starter+0x6/0xc [<00000000006934a0>] kernel_thread_starter+0x0/0xc And BUG: using smp_processor_id() in preemptible [00000000] code: vhost-45897/45898 caller is macvlan_start_xmit+0x10a/0x1b4 [macvlan] CPU: 1 PID: 45898 Comm: vhost-45897 Not tainted 3.11.0-bisecttest #16 Call Trace: ([<00000000001126ee>] show_trace+0x126/0x144) [<00000000001127d2>] show_stack+0xc6/0xd4 [<000000000068bdb8>] dump_stack+0x74/0xd4 [<0000000000481132>] debug_smp_processor_id+0xf6/0x114 [<000003ff802b72ca>] macvlan_start_xmit+0x10a/0x1b4 [macvlan] [<000003ff802ea69a>] macvtap_get_user+0x982/0xbc4 [macvtap] [<000003ff802ea92a>] macvtap_sendmsg+0x4e/0x60 [macvtap] [<000003ff8031947c>] handle_tx+0x494/0x5ec [vhost_net] [<000003ff8028f77c>] vhost_worker+0x15c/0x1c4 [vhost] [<000000000015f3ac>] kthread+0xd8/0xe4 [<000000000069356e>] kernel_thread_starter+0x6/0xc [<0000000000693568>] kernel_thread_starter+0x0/0xc 2 locks held by vhost-45897/45898: #0: (&vq->mutex){+.+.+.}, at: [<000003ff8031903c>] handle_tx+0x54/0x5ec [vhost_net] #1: (rcu_read_lock){.+.+..}, at: [<000003ff802ea53c>] macvtap_get_user+0x824/0xbc4 [macvtap] In the first case, macvtap_put_user() calls macvlan_count_rx() in a preempt-able context, and this is not allowed. In the second case, macvtap_get_user() calls macvlan_start_xmit() with BH enabled, and this is not allowed. Reported-by: Thomas Huth Bisected-by: Thomas Huth Signed-off-by: Eric Dumazet Tested-by: Thomas Huth Cc: Vlad Yasevich Signed-off-by: David S. Miller --- drivers/net/macvtap.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c index a98fb0ed6aef..b51db2abfe44 100644 --- a/drivers/net/macvtap.c +++ b/drivers/net/macvtap.c @@ -818,10 +818,13 @@ static ssize_t macvtap_get_user(struct macvtap_queue *q, struct msghdr *m, skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY; skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; } - if (vlan) + if (vlan) { + local_bh_disable(); macvlan_start_xmit(skb, vlan->dev); - else + local_bh_enable(); + } else { kfree_skb(skb); + } rcu_read_unlock(); return total_len; @@ -912,8 +915,11 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q, done: rcu_read_lock(); vlan = rcu_dereference(q->vlan); - if (vlan) + if (vlan) { + preempt_disable(); macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0); + preempt_enable(); + } rcu_read_unlock(); return ret ? ret : copied; -- cgit v1.2.3 From 3c322a56b01695df15c70bfdc2d02e0ccd80654e Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Fri, 9 Aug 2013 11:44:06 +0200 Subject: can: pcan_usb: fix wrong memcpy() bytes length Fix possibly wrong memcpy() bytes length since some CAN records received from PCAN-USB could define a DLC field in range [9..15]. In that case, the real DLC value MUST be used to move forward the record pointer but, only 8 bytes max. MUST be copied into the data field of the struct can_frame object of the skb given to the network core. Cc: linux-stable Signed-off-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller --- drivers/net/can/usb/peak_usb/pcan_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index 25723d8ee201..925ab8ec9329 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -649,7 +649,7 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) if ((mc->ptr + rec_len) > mc->end) goto decode_failed; - memcpy(cf->data, mc->ptr, rec_len); + memcpy(cf->data, mc->ptr, cf->can_dlc); mc->ptr += rec_len; } -- cgit v1.2.3 From 56329137211639528ddf05c59a9d7cbde6879d1f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 9 Aug 2013 14:02:08 +0200 Subject: stmmac: fix init_dma_desc_rings() to handle errors In stmmac_init_rx_buffers(): * add missing handling of dma_map_single() error * remove superfluous unlikely() optimization while at it Add stmmac_free_rx_buffers() helper and use it in dma_free_rx_skbufs(). In init_dma_desc_rings(): * add missing handling of kmalloc_array() errors * fix handling of dma_alloc_coherent() and stmmac_init_rx_buffers() errors * make function return an error value on error and 0 on success In stmmac_open(): * add handling of init_dma_desc_rings() return value Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 111 ++++++++++++++++++---- 1 file changed, 92 insertions(+), 19 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f2ccb36e8685..0a9bb9d30c3f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -939,15 +939,20 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN, GFP_KERNEL); - if (unlikely(skb == NULL)) { + if (!skb) { pr_err("%s: Rx init fails; skb is NULL\n", __func__); - return 1; + return -ENOMEM; } skb_reserve(skb, NET_IP_ALIGN); priv->rx_skbuff[i] = skb; priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, priv->dma_buf_sz, DMA_FROM_DEVICE); + if (dma_mapping_error(priv->device, priv->rx_skbuff_dma[i])) { + pr_err("%s: DMA mapping error\n", __func__); + dev_kfree_skb_any(skb); + return -EINVAL; + } p->des2 = priv->rx_skbuff_dma[i]; @@ -958,6 +963,16 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, return 0; } +static void stmmac_free_rx_buffers(struct stmmac_priv *priv, int i) +{ + if (priv->rx_skbuff[i]) { + dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], + priv->dma_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb_any(priv->rx_skbuff[i]); + } + priv->rx_skbuff[i] = NULL; +} + /** * init_dma_desc_rings - init the RX/TX descriptor rings * @dev: net device structure @@ -965,13 +980,14 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p, * and allocates the socket buffers. It suppors the chained and ring * modes. */ -static void init_dma_desc_rings(struct net_device *dev) +static int init_dma_desc_rings(struct net_device *dev) { int i; struct stmmac_priv *priv = netdev_priv(dev); unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; unsigned int bfsize = 0; + int ret = -ENOMEM; /* Set the max buffer size according to the DESC mode * and the MTU. Note that RING mode allows 16KiB bsize. @@ -992,34 +1008,60 @@ static void init_dma_desc_rings(struct net_device *dev) dma_extended_desc), &priv->dma_rx_phy, GFP_KERNEL); + if (!priv->dma_erx) + goto err_dma; + priv->dma_etx = dma_alloc_coherent(priv->device, txsize * sizeof(struct dma_extended_desc), &priv->dma_tx_phy, GFP_KERNEL); - if ((!priv->dma_erx) || (!priv->dma_etx)) - return; + if (!priv->dma_etx) { + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_extended_desc), + priv->dma_erx, priv->dma_rx_phy); + goto err_dma; + } } else { priv->dma_rx = dma_alloc_coherent(priv->device, rxsize * sizeof(struct dma_desc), &priv->dma_rx_phy, GFP_KERNEL); + if (!priv->dma_rx) + goto err_dma; + priv->dma_tx = dma_alloc_coherent(priv->device, txsize * sizeof(struct dma_desc), &priv->dma_tx_phy, GFP_KERNEL); - if ((!priv->dma_rx) || (!priv->dma_tx)) - return; + if (!priv->dma_tx) { + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + goto err_dma; + } } priv->rx_skbuff_dma = kmalloc_array(rxsize, sizeof(dma_addr_t), GFP_KERNEL); + if (!priv->rx_skbuff_dma) + goto err_rx_skbuff_dma; + priv->rx_skbuff = kmalloc_array(rxsize, sizeof(struct sk_buff *), GFP_KERNEL); + if (!priv->rx_skbuff) + goto err_rx_skbuff; + priv->tx_skbuff_dma = kmalloc_array(txsize, sizeof(dma_addr_t), GFP_KERNEL); + if (!priv->tx_skbuff_dma) + goto err_tx_skbuff_dma; + priv->tx_skbuff = kmalloc_array(txsize, sizeof(struct sk_buff *), GFP_KERNEL); + if (!priv->tx_skbuff) + goto err_tx_skbuff; + if (netif_msg_probe(priv)) { pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__, (u32) priv->dma_rx_phy, (u32) priv->dma_tx_phy); @@ -1034,8 +1076,9 @@ static void init_dma_desc_rings(struct net_device *dev) else p = priv->dma_rx + i; - if (stmmac_init_rx_buffers(priv, p, i)) - break; + ret = stmmac_init_rx_buffers(priv, p, i); + if (ret) + goto err_init_rx_buffers; if (netif_msg_probe(priv)) pr_debug("[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i], @@ -1081,20 +1124,44 @@ static void init_dma_desc_rings(struct net_device *dev) if (netif_msg_hw(priv)) stmmac_display_rings(priv); + + return 0; +err_init_rx_buffers: + while (--i >= 0) + stmmac_free_rx_buffers(priv, i); + kfree(priv->tx_skbuff); +err_tx_skbuff: + kfree(priv->tx_skbuff_dma); +err_tx_skbuff_dma: + kfree(priv->rx_skbuff); +err_rx_skbuff: + kfree(priv->rx_skbuff_dma); +err_rx_skbuff_dma: + if (priv->extend_desc) { + dma_free_coherent(priv->device, priv->dma_tx_size * + sizeof(struct dma_extended_desc), + priv->dma_etx, priv->dma_tx_phy); + dma_free_coherent(priv->device, priv->dma_rx_size * + sizeof(struct dma_extended_desc), + priv->dma_erx, priv->dma_rx_phy); + } else { + dma_free_coherent(priv->device, + priv->dma_tx_size * sizeof(struct dma_desc), + priv->dma_tx, priv->dma_tx_phy); + dma_free_coherent(priv->device, + priv->dma_rx_size * sizeof(struct dma_desc), + priv->dma_rx, priv->dma_rx_phy); + } +err_dma: + return ret; } static void dma_free_rx_skbufs(struct stmmac_priv *priv) { int i; - for (i = 0; i < priv->dma_rx_size; i++) { - if (priv->rx_skbuff[i]) { - dma_unmap_single(priv->device, priv->rx_skbuff_dma[i], - priv->dma_buf_sz, DMA_FROM_DEVICE); - dev_kfree_skb_any(priv->rx_skbuff[i]); - } - priv->rx_skbuff[i] = NULL; - } + for (i = 0; i < priv->dma_rx_size; i++) + stmmac_free_rx_buffers(priv, i); } static void dma_free_tx_skbufs(struct stmmac_priv *priv) @@ -1560,12 +1627,17 @@ static int stmmac_open(struct net_device *dev) priv->dma_tx_size = STMMAC_ALIGN(dma_txsize); priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize); priv->dma_buf_sz = STMMAC_ALIGN(buf_sz); - init_dma_desc_rings(dev); + + ret = init_dma_desc_rings(dev); + if (ret < 0) { + pr_err("%s: DMA descriptors initialization failed\n", __func__); + goto dma_desc_error; + } /* DMA initialization and SW reset */ ret = stmmac_init_dma_engine(priv); if (ret < 0) { - pr_err("%s: DMA initialization failed\n", __func__); + pr_err("%s: DMA engine initialization failed\n", __func__); goto init_error; } @@ -1672,6 +1744,7 @@ wolirq_error: init_error: free_dma_desc_resources(priv); +dma_desc_error: if (priv->phydev) phy_disconnect(priv->phydev); phy_error: -- cgit v1.2.3 From e47851f13d3300f67ca8c7c73780d029ccaa5d74 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Sat, 10 Aug 2013 15:02:07 -0700 Subject: skge: dma_sync the whole receive buffer The DMA sync should sync the whole receive buffer, not just part of it. Fixes log messages dma_sync_check. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/skge.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c index 3f78336bab2c..ef94a591f9e5 100644 --- a/drivers/net/ethernet/marvell/skge.c +++ b/drivers/net/ethernet/marvell/skge.c @@ -3077,11 +3077,13 @@ static struct sk_buff *skge_rx_get(struct net_device *dev, pci_dma_sync_single_for_cpu(skge->hw->pdev, dma_unmap_addr(e, mapaddr), - len, PCI_DMA_FROMDEVICE); + dma_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); skb_copy_from_linear_data(e->skb, skb->data, len); pci_dma_sync_single_for_device(skge->hw->pdev, dma_unmap_addr(e, mapaddr), - len, PCI_DMA_FROMDEVICE); + dma_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); skge_rx_reuse(e, skge->rx_buf_size); } else { struct sk_buff *nskb; -- cgit v1.2.3 From 507393eb2909ddf39edf3f8f4cd0fd914b720006 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 13 Aug 2013 02:24:59 +0300 Subject: bnx2x: protect different statistics flows Add locking to protect different statistics flows from running simultaneously. This in order to serialize statistics requests sent to FW, otherwise two outstanding queries may cause FW assert. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 66 ++++++++++++++++++----- 3 files changed, 57 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index d80e34b8285f..98be67f660f2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1830,6 +1830,8 @@ struct bnx2x { int fp_array_size; u32 dump_preset_idx; + bool stats_started; + struct semaphore stats_sema; }; /* Tx queues may be less or equal to Rx queues */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e06186c305d8..6e1e9e7d8201 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11524,6 +11524,7 @@ static int bnx2x_init_bp(struct bnx2x *bp) mutex_init(&bp->port.phy_mutex); mutex_init(&bp->fw_mb_mutex); spin_lock_init(&bp->stats_lock); + sema_init(&bp->stats_sema, 1); INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task); INIT_DELAYED_WORK(&bp->sp_rtnl_task, bnx2x_sp_rtnl_task); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 98366abd02bd..d63d1327b051 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -221,7 +221,8 @@ static int bnx2x_stats_comp(struct bnx2x *bp) * Statistics service functions */ -static void bnx2x_stats_pmf_update(struct bnx2x *bp) +/* should be called under stats_sema */ +static void __bnx2x_stats_pmf_update(struct bnx2x *bp) { struct dmae_command *dmae; u32 opcode; @@ -518,7 +519,8 @@ static void bnx2x_func_stats_init(struct bnx2x *bp) *stats_comp = 0; } -static void bnx2x_stats_start(struct bnx2x *bp) +/* should be called under stats_sema */ +static void __bnx2x_stats_start(struct bnx2x *bp) { /* vfs travel through here as part of the statistics FSM, but no action * is required @@ -534,13 +536,34 @@ static void bnx2x_stats_start(struct bnx2x *bp) bnx2x_hw_stats_post(bp); bnx2x_storm_stats_post(bp); + + bp->stats_started = true; +} + +static void bnx2x_stats_start(struct bnx2x *bp) +{ + if (down_timeout(&bp->stats_sema, HZ/10)) + BNX2X_ERR("Unable to acquire stats lock\n"); + __bnx2x_stats_start(bp); + up(&bp->stats_sema); } static void bnx2x_stats_pmf_start(struct bnx2x *bp) { + if (down_timeout(&bp->stats_sema, HZ/10)) + BNX2X_ERR("Unable to acquire stats lock\n"); bnx2x_stats_comp(bp); - bnx2x_stats_pmf_update(bp); - bnx2x_stats_start(bp); + __bnx2x_stats_pmf_update(bp); + __bnx2x_stats_start(bp); + up(&bp->stats_sema); +} + +static void bnx2x_stats_pmf_update(struct bnx2x *bp) +{ + if (down_timeout(&bp->stats_sema, HZ/10)) + BNX2X_ERR("Unable to acquire stats lock\n"); + __bnx2x_stats_pmf_update(bp); + up(&bp->stats_sema); } static void bnx2x_stats_restart(struct bnx2x *bp) @@ -550,8 +573,11 @@ static void bnx2x_stats_restart(struct bnx2x *bp) */ if (IS_VF(bp)) return; + if (down_timeout(&bp->stats_sema, HZ/10)) + BNX2X_ERR("Unable to acquire stats lock\n"); bnx2x_stats_comp(bp); - bnx2x_stats_start(bp); + __bnx2x_stats_start(bp); + up(&bp->stats_sema); } static void bnx2x_bmac_stats_update(struct bnx2x *bp) @@ -888,9 +914,7 @@ static int bnx2x_storm_stats_validate_counters(struct bnx2x *bp) /* Make sure we use the value of the counter * used for sending the last stats ramrod. */ - spin_lock_bh(&bp->stats_lock); cur_stats_counter = bp->stats_counter - 1; - spin_unlock_bh(&bp->stats_lock); /* are storm stats valid? */ if (le16_to_cpu(counters->xstats_counter) != cur_stats_counter) { @@ -1227,12 +1251,18 @@ static void bnx2x_stats_update(struct bnx2x *bp) { u32 *stats_comp = bnx2x_sp(bp, stats_comp); - if (bnx2x_edebug_stats_stopped(bp)) + /* we run update from timer context, so give up + * if somebody is in the middle of transition + */ + if (down_trylock(&bp->stats_sema)) return; + if (bnx2x_edebug_stats_stopped(bp) || !bp->stats_started) + goto out; + if (IS_PF(bp)) { if (*stats_comp != DMAE_COMP_VAL) - return; + goto out; if (bp->port.pmf) bnx2x_hw_stats_update(bp); @@ -1242,7 +1272,7 @@ static void bnx2x_stats_update(struct bnx2x *bp) BNX2X_ERR("storm stats were not updated for 3 times\n"); bnx2x_panic(); } - return; + goto out; } } else { /* vf doesn't collect HW statistics, and doesn't get completions @@ -1256,7 +1286,7 @@ static void bnx2x_stats_update(struct bnx2x *bp) /* vf is done */ if (IS_VF(bp)) - return; + goto out; if (netif_msg_timer(bp)) { struct bnx2x_eth_stats *estats = &bp->eth_stats; @@ -1267,6 +1297,9 @@ static void bnx2x_stats_update(struct bnx2x *bp) bnx2x_hw_stats_post(bp); bnx2x_storm_stats_post(bp); + +out: + up(&bp->stats_sema); } static void bnx2x_port_stats_stop(struct bnx2x *bp) @@ -1332,6 +1365,11 @@ static void bnx2x_stats_stop(struct bnx2x *bp) { int update = 0; + if (down_timeout(&bp->stats_sema, HZ/10)) + BNX2X_ERR("Unable to acquire stats lock\n"); + + bp->stats_started = false; + bnx2x_stats_comp(bp); if (bp->port.pmf) @@ -1348,6 +1386,8 @@ static void bnx2x_stats_stop(struct bnx2x *bp) bnx2x_hw_stats_post(bp); bnx2x_stats_comp(bp); } + + up(&bp->stats_sema); } static void bnx2x_stats_do_nothing(struct bnx2x *bp) @@ -1376,15 +1416,17 @@ static const struct { void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event) { enum bnx2x_stats_state state; + void (*action)(struct bnx2x *bp); if (unlikely(bp->panic)) return; spin_lock_bh(&bp->stats_lock); state = bp->stats_state; bp->stats_state = bnx2x_stats_stm[state][event].next_state; + action = bnx2x_stats_stm[state][event].action; spin_unlock_bh(&bp->stats_lock); - bnx2x_stats_stm[state][event].action(bp); + action(bp); if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp)) DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n", -- cgit v1.2.3 From 568e24260fdc33d8a172a4d8da799cace4111b6e Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 13 Aug 2013 02:25:00 +0300 Subject: bnx2x: update fairness parameters following DCB negotiation ETS can be enabled as a result of DCB negotiation, then fairness must be recalculated after each negotiation. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 4 ++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 30 ++++++++++++++---------- 3 files changed, 24 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 98be67f660f2..f07a7ffd7773 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2453,4 +2453,6 @@ enum bnx2x_pci_bus_speed { BNX2X_PCI_LINK_SPEED_5000 = 5000, BNX2X_PCI_LINK_SPEED_8000 = 8000 }; + +void bnx2x_set_local_cmng(struct bnx2x *bp); #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 0c94df47e0e8..f9122f2d6b65 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -753,6 +753,10 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state) bnx2x_pfc_set_pfc(bp); bnx2x_dcbx_update_ets_params(bp); + + /* ets may affect cmng configuration: reinit it in hw */ + bnx2x_set_local_cmng(bp); + bnx2x_dcbx_resume_hw_tx(bp); return; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 6e1e9e7d8201..78b719568145 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -2476,7 +2476,7 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) input.port_rate = bp->link_vars.line_speed; - if (cmng_type == CMNG_FNS_MINMAX) { + if (cmng_type == CMNG_FNS_MINMAX && input.port_rate) { int vn; /* read mf conf from shmem */ @@ -2533,6 +2533,21 @@ static void storm_memset_cmng(struct bnx2x *bp, } } +/* init cmng mode in HW according to local configuration */ +void bnx2x_set_local_cmng(struct bnx2x *bp) +{ + int cmng_fns = bnx2x_get_cmng_fns_mode(bp); + + if (cmng_fns != CMNG_FNS_NONE) { + bnx2x_cmng_fns_init(bp, false, cmng_fns); + storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); + } else { + /* rate shaping and fairness are disabled */ + DP(NETIF_MSG_IFUP, + "single function mode without fairness\n"); + } +} + /* This function is called upon link interrupt */ static void bnx2x_link_attn(struct bnx2x *bp) { @@ -2568,17 +2583,8 @@ static void bnx2x_link_attn(struct bnx2x *bp) bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP); } - if (bp->link_vars.link_up && bp->link_vars.line_speed) { - int cmng_fns = bnx2x_get_cmng_fns_mode(bp); - - if (cmng_fns != CMNG_FNS_NONE) { - bnx2x_cmng_fns_init(bp, false, cmng_fns); - storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp)); - } else - /* rate shaping and fairness are disabled */ - DP(NETIF_MSG_IFUP, - "single function mode without fairness\n"); - } + if (bp->link_vars.link_up && bp->link_vars.line_speed) + bnx2x_set_local_cmng(bp); __bnx2x_link_report(bp); -- cgit v1.2.3 From 8ece51651883f99efdcadda4c17df53c4333bea8 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Tue, 13 Aug 2013 02:25:01 +0300 Subject: bnx2x: fix memory leak in VF Signed-off-by: Ariel Elior Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 95861efb5051..44104fb27947 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3463,7 +3463,7 @@ int bnx2x_vf_pci_alloc(struct bnx2x *bp) alloc_mem_err: BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, sizeof(struct bnx2x_vf_mbx_msg)); - BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->vf2pf_mbox_mapping, + BNX2X_PCI_FREE(bp->vf2pf_mbox, bp->pf2vf_bulletin_mapping, sizeof(union pf_vf_bulletin)); return -ENOMEM; } -- cgit v1.2.3 From a6d3a5ba3e0c4ed127976c52229d7a277da4d82c Mon Sep 17 00:00:00 2001 From: Barak Witkowsky Date: Tue, 13 Aug 2013 02:25:02 +0300 Subject: bnx2x: fix PTE write access error PTE write access error might occur in MF_ALLOWED mode when IOMMU is active. The patch adds rmmod HSI indicating to MFW to stop running queries which might trigger this failure. Signed-off-by: Barak Witkowsky Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 5 +++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++++ 3 files changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index f07a7ffd7773..ce9b387b5a19 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1502,6 +1502,7 @@ struct bnx2x { #define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21) #define IS_VF_FLAG (1 << 22) #define INTERRUPTS_ENABLED_FLAG (1 << 23) +#define BC_SUPPORTS_RMMOD_CMD (1 << 24) #define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 5018e52ae2ad..32767f6aa33f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1300,6 +1300,9 @@ struct drv_func_mb { #define DRV_MSG_CODE_EEE_RESULTS_ACK 0xda000000 + #define DRV_MSG_CODE_RMMOD 0xdb000000 + #define REQ_BC_VER_4_RMMOD_CMD 0x0007080f + #define DRV_MSG_CODE_SET_MF_BW 0xe0000000 #define REQ_BC_VER_4_SET_MF_BW 0x00060202 #define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000 @@ -1372,6 +1375,8 @@ struct drv_func_mb { #define FW_MSG_CODE_EEE_RESULS_ACK 0xda100000 + #define FW_MSG_CODE_RMMOD_ACK 0xdb100000 + #define FW_MSG_CODE_SET_MF_BW_SENT 0xe0000000 #define FW_MSG_CODE_SET_MF_BW_DONE 0xe1000000 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 78b719568145..339c388e4a18 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10368,6 +10368,10 @@ static void bnx2x_get_common_hwinfo(struct bnx2x *bp) bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ? BC_SUPPORTS_DCBX_MSG_NON_PMF : 0; + + bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ? + BC_SUPPORTS_RMMOD_CMD : 0; + boot_mode = SHMEM_RD(bp, dev_info.port_feature_config[BP_PORT(bp)].mba_config) & PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK; @@ -12824,6 +12828,11 @@ static void __bnx2x_remove(struct pci_dev *pdev, bnx2x_dcbnl_update_applist(bp, true); #endif + if (IS_PF(bp) && + !BP_NOMCP(bp) && + (bp->flags & BC_SUPPORTS_RMMOD_CMD)) + bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0); + /* Close the interface - either directly or implicitly */ if (remove_netdev) { unregister_netdev(dev); -- cgit v1.2.3 From 6ef5a92cdf5ee65578a287b9a030964b03a538ed Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Tue, 13 Aug 2013 02:25:03 +0300 Subject: bnx2x: prevent crash in shutdown flow with CNIC There might be a crash as during shutdown flow CNIC might try to access resources already freed by bnx2x. Change bnx2x_close() into dev_close() in __bnx2x_remove (shutdown flow) to guarantee CNIC is notified of the device's change of status. Signed-off-by: Yuval Mintz Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 339c388e4a18..955d6cfd9cb7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12838,8 +12838,7 @@ static void __bnx2x_remove(struct pci_dev *pdev, unregister_netdev(dev); } else { rtnl_lock(); - if (netif_running(dev)) - bnx2x_close(dev); + dev_close(dev); rtnl_unlock(); } -- cgit v1.2.3 From 9cff866e37eb47780bf34842fcf371e41c5a0639 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Tue, 13 Aug 2013 17:04:36 +0400 Subject: ethernet/arc/arc_emac - fix NAPI "work > weight" warning Initially I improperly set a boundary for maximum number of input packets to process on NAPI poll ("work") so it might be more than expected amount ("weight"). This was really harmless but seeing WARN_ON_ONCE on every device boot is not nice. So trivial fix ("<" instead of "<=") is here. Signed-off-by: Alexey Brodkin Cc: Vineet Gupta Cc: Mischa Jonker Cc: Arnd Bergmann Cc: Grant Likely Cc: Rob Herring Cc: Paul Gortmaker Cc: "David S. Miller" Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index f1b121ee5525..55d79cb53a79 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -199,7 +199,7 @@ static int arc_emac_rx(struct net_device *ndev, int budget) struct arc_emac_priv *priv = netdev_priv(ndev); unsigned int work_done; - for (work_done = 0; work_done <= budget; work_done++) { + for (work_done = 0; work_done < budget; work_done++) { unsigned int *last_rx_bd = &priv->last_rx_bd; struct net_device_stats *stats = &priv->stats; struct buffer_state *rx_buff = &priv->rx_buff[*last_rx_bd]; -- cgit v1.2.3 From d9bf5f130946695063469749bfd190087b7fad39 Mon Sep 17 00:00:00 2001 From: Weiping Pan Date: Tue, 13 Aug 2013 21:46:56 +0800 Subject: tun: compare with 0 instead of total_len Since we set "len = total_len" in the beginning of tun_get_user(), so we should compare the new len with 0, instead of total_len, or the if statement always returns false. Signed-off-by: Weiping Pan Signed-off-by: David S. Miller --- drivers/net/tun.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index db690a372260..5a8ee1cf090a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1074,7 +1074,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, u32 rxhash; if (!(tun->flags & TUN_NO_PI)) { - if ((len -= sizeof(pi)) > total_len) + if ((len -= sizeof(pi)) < 0) return -EINVAL; if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi))) @@ -1083,7 +1083,7 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (tun->flags & TUN_VNET_HDR) { - if ((len -= tun->vnet_hdr_sz) > total_len) + if ((len -= tun->vnet_hdr_sz) < 0) return -EINVAL; if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso))) -- cgit v1.2.3 From 3da988c91d9c167994703a9d6f9e645df22c3c95 Mon Sep 17 00:00:00 2001 From: Sarveshwar Bandi Date: Wed, 14 Aug 2013 13:21:47 +0530 Subject: be2net: Clear any capability flags that driver is not interested in. It is possible for some versions of firmware to advertise capabilities that driver is not ready to handle. This may lead to controller stall. Since the driver is interested only in subset of flags, clearing the rest. Signed-off-by: Sarveshwar Bandi Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 3 +++ drivers/net/ethernet/emulex/benet/be_cmds.h | 6 ++++++ 2 files changed, 9 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 6e6e0a117ee2..8ec5d74ad44d 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -3048,6 +3048,9 @@ int be_cmd_get_func_config(struct be_adapter *adapter) adapter->max_event_queues = le16_to_cpu(desc->eq_count); adapter->if_cap_flags = le32_to_cpu(desc->cap_flags); + + /* Clear flags that driver is not interested in */ + adapter->if_cap_flags &= BE_IF_CAP_FLAGS_WANT; } err: mutex_unlock(&adapter->mbox_lock); diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index 5228d88c5a02..1b3b9e886412 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -563,6 +563,12 @@ enum be_if_flags { BE_IF_FLAGS_MULTICAST = 0x1000 }; +#define BE_IF_CAP_FLAGS_WANT (BE_IF_FLAGS_RSS | BE_IF_FLAGS_PROMISCUOUS |\ + BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_VLAN_PROMISCUOUS |\ + BE_IF_FLAGS_VLAN | BE_IF_FLAGS_MCAST_PROMISCUOUS |\ + BE_IF_FLAGS_PASS_L3L4_ERRORS | BE_IF_FLAGS_MULTICAST |\ + BE_IF_FLAGS_UNTAGGED) + /* An RX interface is an object with one or more MAC addresses and * filtering capabilities. */ struct be_cmd_req_if_create { -- cgit v1.2.3 From 728e2ccaa3c4d20cf4d54b73a47956bf4d334a9f Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 14 Aug 2013 19:19:01 +1000 Subject: Revert "cxgb3: Check and handle the dma mapping errors" This reverts commit f83331bab149e29fa2c49cf102c0cd8c3f1ce9f9. As the tests PPC64 (powernv platform) show, IOMMU pages are leaking when transferring big amount of small packets (<=64 bytes), "ping -f" and waiting for 15 seconds is the simplest way to confirm the bug. Cc: Linus Torvalds Cc: Santosh Rastapur Cc: Jay Fenlason Cc: David S. Miller Cc: Divy Le ray Signed-off-by: Alexey Kardashevskiy Acked-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/sge.c | 107 +++++++------------------------ 1 file changed, 24 insertions(+), 83 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index 687ec4a8bb48..9c89dc8fe105 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -455,11 +455,6 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, q->pg_chunk.offset = 0; mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, 0, q->alloc_size, PCI_DMA_FROMDEVICE); - if (unlikely(pci_dma_mapping_error(adapter->pdev, mapping))) { - __free_pages(q->pg_chunk.page, order); - q->pg_chunk.page = NULL; - return -EIO; - } q->pg_chunk.mapping = mapping; } sd->pg_chunk = q->pg_chunk; @@ -954,75 +949,40 @@ static inline unsigned int calc_tx_descs(const struct sk_buff *skb) return flits_to_desc(flits); } - -/* map_skb - map a packet main body and its page fragments - * @pdev: the PCI device - * @skb: the packet - * @addr: placeholder to save the mapped addresses - * - * map the main body of an sk_buff and its page fragments, if any. - */ -static int map_skb(struct pci_dev *pdev, const struct sk_buff *skb, - dma_addr_t *addr) -{ - const skb_frag_t *fp, *end; - const struct skb_shared_info *si; - - *addr = pci_map_single(pdev, skb->data, skb_headlen(skb), - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(pdev, *addr)) - goto out_err; - - si = skb_shinfo(skb); - end = &si->frags[si->nr_frags]; - - for (fp = si->frags; fp < end; fp++) { - *++addr = skb_frag_dma_map(&pdev->dev, fp, 0, skb_frag_size(fp), - DMA_TO_DEVICE); - if (pci_dma_mapping_error(pdev, *addr)) - goto unwind; - } - return 0; - -unwind: - while (fp-- > si->frags) - dma_unmap_page(&pdev->dev, *--addr, skb_frag_size(fp), - DMA_TO_DEVICE); - - pci_unmap_single(pdev, addr[-1], skb_headlen(skb), PCI_DMA_TODEVICE); -out_err: - return -ENOMEM; -} - /** - * write_sgl - populate a scatter/gather list for a packet + * make_sgl - populate a scatter/gather list for a packet * @skb: the packet * @sgp: the SGL to populate * @start: start address of skb main body data to include in the SGL * @len: length of skb main body data to include in the SGL - * @addr: the list of the mapped addresses + * @pdev: the PCI device * - * Copies the scatter/gather list for the buffers that make up a packet + * Generates a scatter/gather list for the buffers that make up a packet * and returns the SGL size in 8-byte words. The caller must size the SGL * appropriately. */ -static inline unsigned int write_sgl(const struct sk_buff *skb, +static inline unsigned int make_sgl(const struct sk_buff *skb, struct sg_ent *sgp, unsigned char *start, - unsigned int len, const dma_addr_t *addr) + unsigned int len, struct pci_dev *pdev) { - unsigned int i, j = 0, k = 0, nfrags; + dma_addr_t mapping; + unsigned int i, j = 0, nfrags; if (len) { + mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE); sgp->len[0] = cpu_to_be32(len); - sgp->addr[j++] = cpu_to_be64(addr[k++]); + sgp->addr[0] = cpu_to_be64(mapping); + j = 1; } nfrags = skb_shinfo(skb)->nr_frags; for (i = 0; i < nfrags; i++) { const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + mapping = skb_frag_dma_map(&pdev->dev, frag, 0, skb_frag_size(frag), + DMA_TO_DEVICE); sgp->len[j] = cpu_to_be32(skb_frag_size(frag)); - sgp->addr[j] = cpu_to_be64(addr[k++]); + sgp->addr[j] = cpu_to_be64(mapping); j ^= 1; if (j == 0) ++sgp; @@ -1178,7 +1138,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb, const struct port_info *pi, unsigned int pidx, unsigned int gen, struct sge_txq *q, unsigned int ndesc, - unsigned int compl, const dma_addr_t *addr) + unsigned int compl) { unsigned int flits, sgl_flits, cntrl, tso_info; struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1]; @@ -1236,7 +1196,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb, } sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl; - sgl_flits = write_sgl(skb, sgp, skb->data, skb_headlen(skb), addr); + sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev); write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen, htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl), @@ -1267,7 +1227,6 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) struct netdev_queue *txq; struct sge_qset *qs; struct sge_txq *q; - dma_addr_t addr[MAX_SKB_FRAGS + 1]; /* * The chip min packet length is 9 octets but play safe and reject @@ -1296,11 +1255,6 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } - if (unlikely(map_skb(adap->pdev, skb, addr) < 0)) { - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - q->in_use += ndesc; if (unlikely(credits - ndesc < q->stop_thres)) { t3_stop_tx_queue(txq, qs, q); @@ -1358,7 +1312,7 @@ netdev_tx_t t3_eth_xmit(struct sk_buff *skb, struct net_device *dev) if (likely(!skb_shared(skb))) skb_orphan(skb); - write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl, addr); + write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl); check_ring_tx_db(adap, q); return NETDEV_TX_OK; } @@ -1623,8 +1577,7 @@ static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev, */ static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb, struct sge_txq *q, unsigned int pidx, - unsigned int gen, unsigned int ndesc, - const dma_addr_t *addr) + unsigned int gen, unsigned int ndesc) { unsigned int sgl_flits, flits; struct work_request_hdr *from; @@ -1645,9 +1598,9 @@ static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb, flits = skb_transport_offset(skb) / 8; sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl; - sgl_flits = write_sgl(skb, sgp, skb_transport_header(skb), - skb_tail_pointer(skb) - - skb_transport_header(skb), addr); + sgl_flits = make_sgl(skb, sgp, skb_transport_header(skb), + skb->tail - skb->transport_header, + adap->pdev); if (need_skb_unmap()) { setup_deferred_unmapping(skb, adap->pdev, sgp, sgl_flits); skb->destructor = deferred_unmap_destructor; @@ -1705,11 +1658,6 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); goto again; } - if (map_skb(adap->pdev, skb, (dma_addr_t *)skb->head)) { - spin_unlock(&q->lock); - return NET_XMIT_SUCCESS; - } - gen = q->gen; q->in_use += ndesc; pidx = q->pidx; @@ -1720,7 +1668,7 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); } spin_unlock(&q->lock); - write_ofld_wr(adap, skb, q, pidx, gen, ndesc, (dma_addr_t *)skb->head); + write_ofld_wr(adap, skb, q, pidx, gen, ndesc); check_ring_tx_db(adap, q); return NET_XMIT_SUCCESS; } @@ -1738,7 +1686,6 @@ static void restart_offloadq(unsigned long data) struct sge_txq *q = &qs->txq[TXQ_OFLD]; const struct port_info *pi = netdev_priv(qs->netdev); struct adapter *adap = pi->adapter; - unsigned int written = 0; spin_lock(&q->lock); again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); @@ -1758,14 +1705,10 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); break; } - if (map_skb(adap->pdev, skb, (dma_addr_t *)skb->head)) - break; - gen = q->gen; q->in_use += ndesc; pidx = q->pidx; q->pidx += ndesc; - written += ndesc; if (q->pidx >= q->size) { q->pidx -= q->size; q->gen ^= 1; @@ -1773,8 +1716,7 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); __skb_unlink(skb, &q->sendq); spin_unlock(&q->lock); - write_ofld_wr(adap, skb, q, pidx, gen, ndesc, - (dma_addr_t *)skb->head); + write_ofld_wr(adap, skb, q, pidx, gen, ndesc); spin_lock(&q->lock); } spin_unlock(&q->lock); @@ -1784,9 +1726,8 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK); set_bit(TXQ_LAST_PKT_DB, &q->flags); #endif wmb(); - if (likely(written)) - t3_write_reg(adap, A_SG_KDOORBELL, - F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); + t3_write_reg(adap, A_SG_KDOORBELL, + F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id)); } /** -- cgit v1.2.3 From 2fdac010bdcf10a30711b6924612dfc40daf19b8 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 14 Aug 2013 16:26:53 +0200 Subject: drivers/net/ethernet/via/via-velocity.c: update napi implementation Drivers supporting NAPI should use a NAPI-specific function for receiving packets. Hence netif_rx is changed to netif_receive_skb. Furthermore netif_napi_del should be used in the probe and remove function to clean up the NAPI resource information. Thanks to Francois Romieu, David Shwatrz and Rami Rosen for their help on this patch. Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/ethernet/via/via-velocity.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c index 1d6dc41f755d..d01cacf8a7c2 100644 --- a/drivers/net/ethernet/via/via-velocity.c +++ b/drivers/net/ethernet/via/via-velocity.c @@ -2100,7 +2100,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); } - netif_rx(skb); + netif_receive_skb(skb); stats->rx_bytes += pkt_len; stats->rx_packets++; @@ -2884,6 +2884,7 @@ out: return ret; err_iounmap: + netif_napi_del(&vptr->napi); iounmap(regs); err_free_dev: free_netdev(netdev); @@ -2904,6 +2905,7 @@ static int velocity_remove(struct device *dev) struct velocity_info *vptr = netdev_priv(netdev); unregister_netdev(netdev); + netif_napi_del(&vptr->napi); iounmap(vptr->mac_regs); free_netdev(netdev); velocity_nics--; -- cgit v1.2.3 From 6829309926b90c4c32d1f4cafeb600cd34a721e3 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 13 Aug 2013 11:45:13 -0700 Subject: net: tg3: fix NULL pointer dereference in tg3_io_error_detected and tg3_io_slot_reset Commit d8af4dfd8 ("net/tg3: Fix kernel crash") introduced a possible NULL pointer dereference in tg3 driver when !netdev || !netif_running(netdev) condition is met and netdev is NULL. Then, the jump to the 'done' label calls dev_close() with a netdevice that is NULL. Therefore, only call dev_close() when we have a netdevice, but one that is not running. [ Add the same checks in tg3_io_slot_reset() per Gavin Shan - by Nithin Nayak Sujir ] Reported-by: Dave Jones Signed-off-by: Daniel Borkmann Cc: Gavin Shan Cc: Michael Chan Signed-off-by: Nithin Nayak Sujir Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index ddebc7a5dda0..0da2214ef1b9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -17796,8 +17796,10 @@ static pci_ers_result_t tg3_io_error_detected(struct pci_dev *pdev, done: if (state == pci_channel_io_perm_failure) { - tg3_napi_enable(tp); - dev_close(netdev); + if (netdev) { + tg3_napi_enable(tp); + dev_close(netdev); + } err = PCI_ERS_RESULT_DISCONNECT; } else { pci_disable_device(pdev); @@ -17827,7 +17829,8 @@ static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev) rtnl_lock(); if (pci_enable_device(pdev)) { - netdev_err(netdev, "Cannot re-enable PCI device after reset.\n"); + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); goto done; } @@ -17835,7 +17838,7 @@ static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev) pci_restore_state(pdev); pci_save_state(pdev); - if (!netif_running(netdev)) { + if (!netdev || !netif_running(netdev)) { rc = PCI_ERS_RESULT_RECOVERED; goto done; } @@ -17847,7 +17850,7 @@ static pci_ers_result_t tg3_io_slot_reset(struct pci_dev *pdev) rc = PCI_ERS_RESULT_RECOVERED; done: - if (rc != PCI_ERS_RESULT_RECOVERED && netif_running(netdev)) { + if (rc != PCI_ERS_RESULT_RECOVERED && netdev && netif_running(netdev)) { tg3_napi_enable(tp); dev_close(netdev); } -- cgit v1.2.3 From 24866d15fa07cc8f0a1a8c48846f64af4af5d72a Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Thu, 15 Aug 2013 08:29:27 -0400 Subject: qlcnic: Fix set driver version command Driver was issuing set driver version command through all functions in the adapter. Fix the driver to issue set driver version once per adapter, through function 0. Signed-off-by: Himanshu Madhani Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 3 ++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 6 ++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 9f4b8d5f0865..345d987aede4 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -629,7 +629,8 @@ int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter) return -EIO; } - qlcnic_set_drv_version(adapter); + if (adapter->portnum == 0) + qlcnic_set_drv_version(adapter); qlcnic_83xx_idc_attach_driver(adapter); return 0; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index ee013fcc3322..bc05d016c859 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -2165,7 +2165,8 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (err) goto err_out_disable_mbx_intr; - qlcnic_set_drv_version(adapter); + if (adapter->portnum == 0) + qlcnic_set_drv_version(adapter); pci_set_drvdata(pdev, adapter); @@ -3085,7 +3086,8 @@ done: adapter->fw_fail_cnt = 0; adapter->flags &= ~QLCNIC_FW_HANG; clear_bit(__QLCNIC_RESETTING, &adapter->state); - qlcnic_set_drv_version(adapter); + if (adapter->portnum == 0) + qlcnic_set_drv_version(adapter); if (!qlcnic_clr_drv_state(adapter)) qlcnic_schedule_work(adapter, qlcnic_fw_poll_work, -- cgit v1.2.3 From 482b3c3634f73f32bf1059b4470e1c5709c05ddf Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Thu, 15 Aug 2013 08:29:28 -0400 Subject: qlcnic: Fix beacon state return status handling o Driver was misinterpreting the return status for beacon state query leading to incorrect interpretation of beacon state and logging an error message for successful status. Fixed the driver to properly interpret the return status. Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 10ed82b3baca..660c3f5b2237 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -170,9 +170,9 @@ static int qlcnic_82xx_store_beacon(struct qlcnic_adapter *adapter, if (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_2_BEACON) { err = qlcnic_get_beacon_state(adapter, &h_beacon_state); - if (!err) { - dev_info(&adapter->pdev->dev, - "Failed to get current beacon state\n"); + if (err) { + netdev_err(adapter->netdev, + "Failed to get current beacon state\n"); } else { if (h_beacon_state == QLCNIC_BEACON_DISABLE) ahw->beacon_state = 0; -- cgit v1.2.3 From d1fcc172570fa4de69c60bdabe1e1ccfcfe80c26 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 15 Aug 2013 08:29:29 -0400 Subject: qlcnic: Fix diagnostic interrupt test for 83xx adapters o Do not allow interrupt test when adapter is resetting. Signed-off-by: Manish Chopra Signed-off-by: Sucheta Chakraborty Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 92da9980a0a0..9d4bb7f83904 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3266,6 +3266,11 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev) u8 val; int ret, max_sds_rings = adapter->max_sds_rings; + if (test_bit(__QLCNIC_RESETTING, &adapter->state)) { + netdev_info(netdev, "Device is resetting\n"); + return -EBUSY; + } + if (qlcnic_get_diag_lock(adapter)) { netdev_info(netdev, "Device in diagnostics mode\n"); return -EBUSY; -- cgit v1.2.3 From 15718ea0d844e4816dbd95d57a8a0e3e264ba90e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 15 Aug 2013 15:52:57 +0300 Subject: tun: signedness bug in tun_get_user() The recent fix d9bf5f1309 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by: Dan Carpenter Acked-by: Michael S. Tsirkin Acked-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/tun.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 5a8ee1cf090a..71af122edf2d 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1074,8 +1074,9 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, u32 rxhash; if (!(tun->flags & TUN_NO_PI)) { - if ((len -= sizeof(pi)) < 0) + if (len < sizeof(pi)) return -EINVAL; + len -= sizeof(pi); if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi))) return -EFAULT; @@ -1083,8 +1084,9 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, } if (tun->flags & TUN_VNET_HDR) { - if ((len -= tun->vnet_hdr_sz) < 0) + if (len < tun->vnet_hdr_sz) return -EINVAL; + len -= tun->vnet_hdr_sz; if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso))) return -EFAULT; -- cgit v1.2.3 From 0a324f3189ed9c78b1aaf48d88e93cb18643c655 Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Wed, 14 Aug 2013 17:46:48 +0300 Subject: net/mlx5_core: Support MANAGE_PAGES and QUERY_PAGES firmware command changes In the previous QUERY_PAGES command version we used one command to get the required amount of boot, init and post init pages. The new version uses the op_mod field to specify whether the query is for the required amount of boot, init or post init pages. In addition the output field size for the required amount of pages increased from 16 to 32 bits. In MANAGE_PAGES command the input_num_entries and output_num_entries fields sizes changed from 16 to 32 bits and the PAS tables offset changed to 0x10. In the pages request event the num_pages field also changed to 32 bits. In the HCA-capabilities-layout the size and location of max_qp_mcg field has been changed to support 24 bits. This patch isn't compatible with firmware versions < 5; however, it turns out that the first GA firmware we will publish will not support previous versions so this should be OK. Signed-off-by: Moshe Lazer Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/eq.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/fw.c | 2 +- .../net/ethernet/mellanox/mlx5/core/pagealloc.c | 58 ++++++++++------------ include/linux/mlx5/device.h | 22 ++++---- include/linux/mlx5/driver.h | 4 +- 6 files changed, 41 insertions(+), 49 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index c571de85d0f9..5472cbd34028 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -46,7 +46,7 @@ #include "mlx5_core.h" enum { - CMD_IF_REV = 4, + CMD_IF_REV = 5, }; enum { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c index c02cbcfd0fb8..443cc4d7b024 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c @@ -268,7 +268,7 @@ static int mlx5_eq_int(struct mlx5_core_dev *dev, struct mlx5_eq *eq) case MLX5_EVENT_TYPE_PAGE_REQUEST: { u16 func_id = be16_to_cpu(eqe->data.req_pages.func_id); - s16 npages = be16_to_cpu(eqe->data.req_pages.num_pages); + s32 npages = be32_to_cpu(eqe->data.req_pages.num_pages); mlx5_core_dbg(dev, "page request for func 0x%x, napges %d\n", func_id, npages); mlx5_core_req_pages_handler(dev, func_id, npages); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw.c b/drivers/net/ethernet/mellanox/mlx5/core/fw.c index 72a5222447f5..f012658b6a92 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fw.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw.c @@ -113,7 +113,7 @@ int mlx5_cmd_query_hca_cap(struct mlx5_core_dev *dev, caps->log_max_srq = out->hca_cap.log_max_srqs & 0x1f; caps->local_ca_ack_delay = out->hca_cap.local_ca_ack_delay & 0x1f; caps->log_max_mcg = out->hca_cap.log_max_mcg; - caps->max_qp_mcg = be16_to_cpu(out->hca_cap.max_qp_mcg); + caps->max_qp_mcg = be32_to_cpu(out->hca_cap.max_qp_mcg) & 0xffffff; caps->max_ra_res_qp = 1 << (out->hca_cap.log_max_ra_res_qp & 0x3f); caps->max_ra_req_qp = 1 << (out->hca_cap.log_max_ra_req_qp & 0x3f); caps->max_srq_wqes = 1 << out->hca_cap.log_max_srq_sz; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c index 4a3e137931a3..3a2408d44820 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c @@ -43,10 +43,16 @@ enum { MLX5_PAGES_TAKE = 2 }; +enum { + MLX5_BOOT_PAGES = 1, + MLX5_INIT_PAGES = 2, + MLX5_POST_INIT_PAGES = 3 +}; + struct mlx5_pages_req { struct mlx5_core_dev *dev; u32 func_id; - s16 npages; + s32 npages; struct work_struct work; }; @@ -64,27 +70,23 @@ struct mlx5_query_pages_inbox { struct mlx5_query_pages_outbox { struct mlx5_outbox_hdr hdr; - __be16 num_boot_pages; + __be16 rsvd; __be16 func_id; - __be16 init_pages; - __be16 num_pages; + __be32 num_pages; }; struct mlx5_manage_pages_inbox { struct mlx5_inbox_hdr hdr; - __be16 rsvd0; + __be16 rsvd; __be16 func_id; - __be16 rsvd1; - __be16 num_entries; - u8 rsvd2[16]; + __be32 num_entries; __be64 pas[0]; }; struct mlx5_manage_pages_outbox { struct mlx5_outbox_hdr hdr; - u8 rsvd0[2]; - __be16 num_entries; - u8 rsvd1[20]; + __be32 num_entries; + u8 rsvd[4]; __be64 pas[0]; }; @@ -146,7 +148,7 @@ static struct page *remove_page(struct mlx5_core_dev *dev, u64 addr) } static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id, - s16 *pages, s16 *init_pages, u16 *boot_pages) + s32 *npages, int boot) { struct mlx5_query_pages_inbox in; struct mlx5_query_pages_outbox out; @@ -155,6 +157,8 @@ static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id, memset(&in, 0, sizeof(in)); memset(&out, 0, sizeof(out)); in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_QUERY_PAGES); + in.hdr.opmod = boot ? cpu_to_be16(MLX5_BOOT_PAGES) : cpu_to_be16(MLX5_INIT_PAGES); + err = mlx5_cmd_exec(dev, &in, sizeof(in), &out, sizeof(out)); if (err) return err; @@ -162,15 +166,7 @@ static int mlx5_cmd_query_pages(struct mlx5_core_dev *dev, u16 *func_id, if (out.hdr.status) return mlx5_cmd_status_to_err(&out.hdr); - if (pages) - *pages = be16_to_cpu(out.num_pages); - - if (init_pages) - *init_pages = be16_to_cpu(out.init_pages); - - if (boot_pages) - *boot_pages = be16_to_cpu(out.num_boot_pages); - + *npages = be32_to_cpu(out.num_pages); *func_id = be16_to_cpu(out.func_id); return err; @@ -224,7 +220,7 @@ static int give_pages(struct mlx5_core_dev *dev, u16 func_id, int npages, in->hdr.opcode = cpu_to_be16(MLX5_CMD_OP_MANAGE_PAGES); in->hdr.opmod = cpu_to_be16(MLX5_PAGES_GIVE); in->func_id = cpu_to_be16(func_id); - in->num_entries = cpu_to_be16(npages); + in->num_entries = cpu_to_be32(npages); err = mlx5_cmd_exec(dev, in, inlen, &out, sizeof(out)); mlx5_core_dbg(dev, "err %d\n", err); if (err) { @@ -292,7 +288,7 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, in.hdr.opcode = cpu_to_be16(MLX5_CMD_OP_MANAGE_PAGES); in.hdr.opmod = cpu_to_be16(MLX5_PAGES_TAKE); in.func_id = cpu_to_be16(func_id); - in.num_entries = cpu_to_be16(npages); + in.num_entries = cpu_to_be32(npages); mlx5_core_dbg(dev, "npages %d, outlen %d\n", npages, outlen); err = mlx5_cmd_exec(dev, &in, sizeof(in), out, outlen); if (err) { @@ -306,7 +302,7 @@ static int reclaim_pages(struct mlx5_core_dev *dev, u32 func_id, int npages, goto out_free; } - num_claimed = be16_to_cpu(out->num_entries); + num_claimed = be32_to_cpu(out->num_entries); if (nclaimed) *nclaimed = num_claimed; @@ -345,7 +341,7 @@ static void pages_work_handler(struct work_struct *work) } void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, - s16 npages) + s32 npages) { struct mlx5_pages_req *req; @@ -364,20 +360,18 @@ void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev, int boot) { - u16 uninitialized_var(boot_pages); - s16 uninitialized_var(init_pages); u16 uninitialized_var(func_id); + s32 uninitialized_var(npages); int err; - err = mlx5_cmd_query_pages(dev, &func_id, NULL, &init_pages, - &boot_pages); + err = mlx5_cmd_query_pages(dev, &func_id, &npages, boot); if (err) return err; + mlx5_core_dbg(dev, "requested %d %s pages for func_id 0x%x\n", + npages, boot ? "boot" : "init", func_id); - mlx5_core_dbg(dev, "requested %d init pages and %d boot pages for func_id 0x%x\n", - init_pages, boot_pages, func_id); - return give_pages(dev, func_id, boot ? boot_pages : init_pages, 0); + return give_pages(dev, func_id, npages, 0); } static int optimal_reclaimed_pages(void) diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h index 737685e9e852..68029b30c3dc 100644 --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -309,21 +309,20 @@ struct mlx5_hca_cap { __be16 max_desc_sz_rq; u8 rsvd21[2]; __be16 max_desc_sz_sq_dc; - u8 rsvd22[4]; - __be16 max_qp_mcg; - u8 rsvd23; + __be32 max_qp_mcg; + u8 rsvd22[3]; u8 log_max_mcg; - u8 rsvd24; + u8 rsvd23; u8 log_max_pd; - u8 rsvd25; + u8 rsvd24; u8 log_max_xrcd; - u8 rsvd26[42]; + u8 rsvd25[42]; __be16 log_uar_page_sz; - u8 rsvd27[28]; + u8 rsvd26[28]; u8 log_msx_atomic_size_qp; - u8 rsvd28[2]; + u8 rsvd27[2]; u8 log_msx_atomic_size_dc; - u8 rsvd29[76]; + u8 rsvd28[76]; }; @@ -472,9 +471,8 @@ struct mlx5_eqe_cmd { struct mlx5_eqe_page_req { u8 rsvd0[2]; __be16 func_id; - u8 rsvd1[2]; - __be16 num_pages; - __be32 rsvd2[5]; + __be32 num_pages; + __be32 rsvd1[5]; }; union ev_data { diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 611e65e76b00..8888381fc150 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -358,7 +358,7 @@ struct mlx5_caps { u32 reserved_lkey; u8 local_ca_ack_delay; u8 log_max_mcg; - u16 max_qp_mcg; + u32 max_qp_mcg; int min_page_sz; }; @@ -691,7 +691,7 @@ void mlx5_pagealloc_cleanup(struct mlx5_core_dev *dev); int mlx5_pagealloc_start(struct mlx5_core_dev *dev); void mlx5_pagealloc_stop(struct mlx5_core_dev *dev); void mlx5_core_req_pages_handler(struct mlx5_core_dev *dev, u16 func_id, - s16 npages); + s32 npages); int mlx5_satisfy_startup_pages(struct mlx5_core_dev *dev, int boot); int mlx5_reclaim_startup_pages(struct mlx5_core_dev *dev); void mlx5_register_debugfs(void); -- cgit v1.2.3