From 21bc7af6e5e684b44725b20f679e701e38ceef15 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Wed, 18 May 2011 12:02:03 -0700 Subject: mwifiex: correct event header length While decoding received event packet from firmware, 4 bytes of interface header are already removed unconditionally. So for handling event only 4 more bytes needs to be pulled. This is achieved by changing event header length to 4. Almost all the events, except BA stream related and AMSDU aggregation control events, do not have the payload in their event skb. Such events handling depends only on the event ID. This event ID is the first four bytes of the event skb, which is copied to a separate variable before pulling the skb header. Hence event handling worked only for those events that didn't have payload in event skb. This patch fixes the broken event path of the events with payload in their event skb without harming existing working event path for the events without payload. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index a0e9bc5253e0..4e97e90aa399 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -167,8 +167,8 @@ /* Rx unit register */ #define CARD_RX_UNIT_REG 0x63 -/* Event header Len*/ -#define MWIFIEX_EVENT_HEADER_LEN 8 +/* Event header len w/o 4 bytes of interface header */ +#define MWIFIEX_EVENT_HEADER_LEN 4 /* Max retry number of CMD53 write */ #define MAX_WRITE_IOMEM_RETRY 2 -- cgit v1.2.3 From a9e12869758430424804dd4332e0d2afdfdf00b0 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 May 2011 10:17:04 -0500 Subject: rtlwifi: Fix kernel panic resulting from RX buffer allocation failure To handle amsdu_8k capability, the PCI routine of this driver must allocate receive buffers of order 2. Under heavy load, this causes fragmentation of memory. The present code releases the current buffer before checking to see if a new one is availble. Recovery from allocation failures is not possible, which results in kernel panics. The fix is to reorder the code to check that a new buffer can be allocated before the old one is released. If not possible, the received frame is dropped and the old one is reused. Without this change, it is impossible to transfer a 2 GB file without a kernel panic. Signed-off-by: Larry Finger Cc: Stable [2.6.{37,38,39}] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index a40952845436..c2b83a57c581 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -669,11 +669,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) &rx_status, (u8 *) pdesc, skb); - pci_unmap_single(rtlpci->pdev, - *((dma_addr_t *) skb->cb), - rtlpci->rxbuffersize, - PCI_DMA_FROMDEVICE); - skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc, false, HW_DESC_RXPKT_LEN)); @@ -690,6 +685,21 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) hdr = rtl_get_hdr(skb); fc = rtl_get_fc(skb); + /* try for new buffer - if allocation fails, drop + * frame and reuse old buffer + */ + new_skb = dev_alloc_skb(rtlpci->rxbuffersize); + if (unlikely(!new_skb)) { + RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), + DBG_DMESG, + ("can't alloc skb for rx\n")); + goto done; + } + pci_unmap_single(rtlpci->pdev, + *((dma_addr_t *) skb->cb), + rtlpci->rxbuffersize, + PCI_DMA_FROMDEVICE); + if (!stats.crc || !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); @@ -758,15 +768,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) rtl_lps_leave(hw); } - new_skb = dev_alloc_skb(rtlpci->rxbuffersize); - if (unlikely(!new_skb)) { - RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, - ("can't alloc skb for rx\n")); - goto done; - } skb = new_skb; - /*skb->dev = dev; */ rtlpci->rx_ring[rx_queue_idx].rx_buf[rtlpci-> rx_ring -- cgit v1.2.3 From 0019a2c9277bf6d083032a5a9857249e75407a8c Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 May 2011 11:48:45 -0500 Subject: rtlwifi: Use order 2 RX buffer allocation only if necessary Although a previous fix handles the kernel panics that result from failure to allocate a new RX buffer, memory fragmentation can be reduced if the amsdu_8k capability is disabled as new buffers need only be of O(0), not O(2). Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index c2b83a57c581..89100e7c553b 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1115,6 +1115,13 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) rtlpci->rx_ring[rx_queue_idx].idx = 0; + /* If amsdu_8k is disabled, set buffersize to 4096. This + * change will reduce memory fragmentation. + */ + if (rtlpci->rxbuffersize > 4096 && + rtlpriv->rtlhal.disable_amsdu_8k) + rtlpci->rxbuffersize = 4096; + for (i = 0; i < rtlpci->rxringcount; i++) { struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); -- cgit v1.2.3 From fb23d86382a088d50020fd05024d40af5b00f885 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 20 May 2011 01:04:46 +0200 Subject: b43: N-PHY: initialize last var in calibration function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Larry Finger Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 9ed65157bef5..05960ddde24e 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -3093,7 +3093,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev, int freq; bool avoid = false; u8 length; - u16 tmp, core, type, count, max, numb, last, cmd; + u16 tmp, core, type, count, max, numb, last = 0, cmd; const u16 *table; bool phy6or5x; -- cgit v1.2.3 From a4d86d953b8593791cb29cf2acffd48f9ee6c4f9 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:10 +0530 Subject: ath9k: Reset chip on baseband hang Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index bd18b1d01be7..409ef5885a11 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -670,7 +670,8 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - if (status & ATH9K_INT_FATAL) { + if ((status & ATH9K_INT_FATAL) || + (status & ATH9K_INT_BB_WATCHDOG)) { ath_reset(sc, true); return; } @@ -737,6 +738,7 @@ irqreturn_t ath_isr(int irq, void *dev) { #define SCHED_INTR ( \ ATH9K_INT_FATAL | \ + ATH9K_INT_BB_WATCHDOG | \ ATH9K_INT_RXORN | \ ATH9K_INT_RXEOL | \ ATH9K_INT_RX | \ -- cgit v1.2.3 From 51ac8cbb2176dc159ee910d7074c6796079c3068 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:13 +0530 Subject: ath9k_hw: disable phy restart on baseband panic caused by RXSM While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 22 ++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.c | 5 ++++- drivers/net/wireless/ath/ath9k/hw.h | 2 ++ 3 files changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index eee23ecd118a..892c48b15434 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1381,3 +1381,25 @@ void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah) "==== BB update: done ====\n\n"); } EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info); + +void ar9003_hw_disable_phy_restart(struct ath_hw *ah) +{ + u32 val; + + /* While receiving unsupported rate frame rx state machine + * gets into a state 0xb and if phy_restart happens in that + * state, BB would go hang. If RXSM is in 0xb state after + * first bb panic, ensure to disable the phy_restart. + */ + if (!((MS(ah->bb_watchdog_last_status, + AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) || + ah->bb_hang_rx_ofdm)) + return; + + ah->bb_hang_rx_ofdm = true; + val = REG_READ(ah, AR_PHY_RESTART); + val &= ~AR_PHY_RESTART_ENA; + + REG_WRITE(ah, AR_PHY_RESTART, val); +} +EXPORT_SYMBOL(ar9003_hw_disable_phy_restart); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 72543ce8f616..1be7c8bbef84 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1555,9 +1555,12 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ah->btcoex_hw.enabled) ath9k_hw_btcoex_enable(ah); - if (AR_SREV_9300_20_OR_LATER(ah)) + if (AR_SREV_9300_20_OR_LATER(ah)) { ar9003_hw_bb_watchdog_config(ah); + ar9003_hw_disable_phy_restart(ah); + } + ath9k_hw_apply_gpio_override(ah); return 0; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 57435ce62792..4b157c53d1a8 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -842,6 +842,7 @@ struct ath_hw { u32 bb_watchdog_last_status; u32 bb_watchdog_timeout_ms; /* in ms, 0 to disable */ + u8 bb_hang_rx_ofdm; /* true if bb hang due to rx_ofdm */ unsigned int paprd_target_power; unsigned int paprd_training_power; @@ -990,6 +991,7 @@ void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah); void ar9003_hw_bb_watchdog_config(struct ath_hw *ah); void ar9003_hw_bb_watchdog_read(struct ath_hw *ah); void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah); +void ar9003_hw_disable_phy_restart(struct ath_hw *ah); void ar9003_paprd_enable(struct ath_hw *ah, bool val); void ar9003_paprd_populate_single_table(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata, -- cgit v1.2.3 From 41e2b05b9598d6bdf91fc20280bfc538d853f769 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:14 +0530 Subject: ath9k: set 40 Mhz rate only if hw is configured in ht40 Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 133502b9c832..c0d0773baa22 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -689,7 +689,8 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table, if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) { rate->flags |= IEEE80211_TX_RC_MCS; - if (WLAN_RC_PHY_40(rate_table->info[rix].phy)) + if (WLAN_RC_PHY_40(rate_table->info[rix].phy) && + conf_is_ht40(&txrc->hw->conf)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) rate->flags |= IEEE80211_TX_RC_SHORT_GI; -- cgit v1.2.3 From aac11c1b351413aa3412e258e2b2dcba31777209 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 24 May 2011 16:28:55 +0200 Subject: iwl4965: fix 5GHz operation rx_status.band is used uninitialized, what disallow to work on 5GHz . Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c index 7e5e85a017b5..a7a4739880dc 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c @@ -628,11 +628,11 @@ void iwl4965_rx_reply_rx(struct iwl_priv *priv, /* rx_status carries information about the packet to mac80211 */ rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.freq = ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), rx_status.band); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.rate_idx = iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); rx_status.flag = 0; -- cgit v1.2.3 From 64bd0821a3b66c3307d7a4ee5523e3e35ec2df0e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 25 May 2011 09:44:05 +0800 Subject: wireless: Default to 'n' for 2 new added devices in Kconfig. We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" Cc: Johannes Berg Signed-off-by: Tao Ma Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 1 - drivers/net/wireless/rt2x00/Kconfig | 1 - 2 files changed, 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index d9ff8413ab9a..d9c08c619a3a 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -26,7 +26,6 @@ config ATH9K config ATH9K_PCI bool "Atheros ath9k PCI/PCIe bus support" depends on ATH9K && PCI - default PCI ---help--- This option enables the PCI bus support in ath9k. diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 9def1e5369a1..b2f8b8fd4d2d 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -166,7 +166,6 @@ config RT2800USB_RT35XX config RT2800USB_RT53XX bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" depends on EXPERIMENTAL - default y ---help--- This adds support for rt53xx wireless chipset family to the rt2800pci driver. -- cgit v1.2.3 From 1df85ecec36ad5da3f0165760704310d6c03f65f Mon Sep 17 00:00:00 2001 From: Adrian Chadd Date: Fri, 27 May 2011 01:08:04 +0800 Subject: ath9k: Fix AR9287 calibration The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 015d97439935..2d4c0910295b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -829,7 +829,7 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) if (AR_SREV_9271(ah)) { if (!ar9285_hw_cl_cal(ah, chan)) return false; - } else if (AR_SREV_9285_12_OR_LATER(ah)) { + } else if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) { if (!ar9285_hw_clc(ah, chan)) return false; } else { -- cgit v1.2.3 From 71005be40a7fc95edda3cc462361ce0243e4f5fa Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Thu, 26 May 2011 21:31:08 +0100 Subject: libertas: Set command sequence number later to ensure consistency Before this patch, the command sequence number is being set before lbs_queue_cmd() adds the command to the queue. However, lbs_queue_cmd() sometimes forces commands to queue-jump (e.g. CMD_802_11_WAKEUP_CONFIRM). It currently does this without considering that sequence numbers might need adjusting to keep things running in order. Fix this by setting the sequence number at a later stage, just before we're actually submitting the command to the hardware. Also fixes a possible race where seqnum was being modified outside of the driver lock. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 84566db486d2..71c8f3fccfa1 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv, cmd = cmdnode->cmdbuf; spin_lock_irqsave(&priv->driver_lock, flags); + priv->seqnum++; + cmd->seqnum = cpu_to_le16(priv->seqnum); priv->cur_cmd = cmdnode; spin_unlock_irqrestore(&priv->driver_lock, flags); @@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv, /* Copy the incoming command to the buffer */ memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size); - /* Set sequence number, clean result, move to buffer */ - priv->seqnum++; + /* Set command, clean result, move to buffer */ cmdnode->cmdbuf->command = cpu_to_le16(command); cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); - cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); cmdnode->cmdbuf->result = 0; lbs_deb_host("PREP_CMD: command 0x%04x\n", command); -- cgit v1.2.3 From dd08682150e1815fe5cdd0673a2f2e9cd2d55a7a Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:45 +0300 Subject: wl12xx: fix passive and radar channel generation for scheduled scan We were comparing bitwise AND results with a boolean, so when the boolean was set to true, it was not matching as it should. Fix this by booleanizing the bitwise AND results with !!. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f37e5a391976..f223e0ed0c41 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -338,8 +338,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, flags = req->channels[i]->flags; if (!(flags & IEEE80211_CHAN_DISABLED) && - ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && - ((flags & IEEE80211_CHAN_RADAR) == radar) && + (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + (!!(flags & IEEE80211_CHAN_RADAR) == radar) && (req->channels[i]->band == band)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, -- cgit v1.2.3 From 2497a246e880d1fb537f754f551177c01fa39242 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:46 +0300 Subject: wl12xx: fix DFS channels handling in scheduled scan DFS channels were never getting included in the scheduled scans, because they always contain the passive flag as well and the call was asking for DFS and active channels. Fix this by ignoring the passive flag when collecting DFS channels. Also, move the DFS channels in the channel list before the 5GHz active channels (this was implemented in the FW differently than specified). Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 31 ++++++++++++++++++++----------- drivers/net/wireless/wl12xx/scan.h | 3 +++ 2 files changed, 23 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index f223e0ed0c41..8ccbb911776a 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -337,10 +337,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, i++) { flags = req->channels[i]->flags; - if (!(flags & IEEE80211_CHAN_DISABLED) && - (!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) && + if ((req->channels[i]->band == band) && + !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && - (req->channels[i]->band == band)) { + /* if radar is set, we ignore the passive flag */ + (radar || + !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", req->channels[i]->band, req->channels[i]->center_freq); @@ -350,6 +352,8 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); + if (flags & IEEE80211_CHAN_RADAR) + channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); @@ -359,7 +363,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, channels[j].max_duration = cpu_to_le16(c->max_dwell_time_active); } - channels[j].tx_power_att = req->channels[j]->max_power; + channels[j].tx_power_att = req->channels[i]->max_power; channels[j].channel = req->channels[i]->hw_value; j++; @@ -386,7 +390,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_2GHZ, false, false, idx); - idx += cfg->active[0]; + /* + * 5GHz channels always start at position 14, not immediately + * after the last 2.4GHz channel + */ + idx = 14; cfg->passive[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, @@ -394,22 +402,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl, false, true, idx); idx += cfg->passive[1]; - cfg->active[1] = + cfg->dfs = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - false, false, 14); - idx += cfg->active[1]; + true, true, idx); + idx += cfg->dfs; - cfg->dfs = + cfg->active[1] = wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels, IEEE80211_BAND_5GHZ, - true, false, idx); - idx += cfg->dfs; + false, false, idx); + idx += cfg->active[1]; wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", cfg->active[0], cfg->passive[0]); wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", cfg->active[1], cfg->passive[1]); + wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs); return idx; } diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h index c83319579ca3..a0b6c5d67b07 100644 --- a/drivers/net/wireless/wl12xx/scan.h +++ b/drivers/net/wireless/wl12xx/scan.h @@ -137,6 +137,9 @@ enum { SCAN_BSS_TYPE_ANY, }; +#define SCAN_CHANNEL_FLAGS_DFS BIT(0) +#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1) + struct conn_scan_ch_params { __le16 min_duration; __le16 max_duration; -- cgit v1.2.3 From 50a66d7f04adbfab9db55144c58dc693358cb635 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:47 +0300 Subject: wl12xx: add separate config value for DFS dwell time on sched scan Use a different value for DFS dwell time when performing a scheduled scan. Previously we were using the same value as for normal passive scans. This adds some flexibility between these two different types of passive scan. For now we use 150 TUs for DFS channel dwell time. This may need to be fine-tuned in the future. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/conf.h | 3 +++ drivers/net/wireless/wl12xx/main.c | 1 + drivers/net/wireless/wl12xx/scan.c | 7 +++++-- 3 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h index 1ab6c86aac40..c83fefb6662f 100644 --- a/drivers/net/wireless/wl12xx/conf.h +++ b/drivers/net/wireless/wl12xx/conf.h @@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings { /* time to wait on the channel for passive scans (in TUs) */ u32 dwell_time_passive; + /* time to wait on the channel for DFS scans (in TUs) */ + u32 dwell_time_dfs; + /* number of probe requests to send on each channel in active scans */ u8 num_probe_reqs; diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index bc00e52f6445..e6497dc669df 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = { .min_dwell_time_active = 8, .max_dwell_time_active = 30, .dwell_time_passive = 100, + .dwell_time_dfs = 150, .num_probe_reqs = 2, .rssi_threshold = -90, .snr_threshold = 0, diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 8ccbb911776a..28ec0addc657 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -352,9 +352,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, wl1271_debug(DEBUG_SCAN, "max_power %d", req->channels[i]->max_power); - if (flags & IEEE80211_CHAN_RADAR) + if (flags & IEEE80211_CHAN_RADAR) { channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; - if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { + channels[j].passive_duration = + cpu_to_le16(c->dwell_time_dfs); + } + else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { channels[j].passive_duration = cpu_to_le16(c->dwell_time_passive); } else { -- cgit v1.2.3 From 66870b1ccd5c1460e437c18b0026e2dcaab1ece9 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Fri, 27 May 2011 15:34:48 +0300 Subject: wl12xx: fix oops in sched_scan when forcing a passive scan Fix kernel oops when trying to use passive scheduled scans. The reason was that in passive scans there are no SSIDs, so there was a NULL pointer dereference. To solve the problem, we now check the number of SSIDs provided in the sched_scan request and only access the list if there's one or more (ie. passive scan is not forced). We also force all the channels to be passive by adding the IEEE80211_CHAN_PASSIVE_SCAN flag locally before the checks in the wl1271_scan_get_sched_scan_channels() function. Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/scan.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c index 28ec0addc657..56f76abc754d 100644 --- a/drivers/net/wireless/wl12xx/scan.c +++ b/drivers/net/wireless/wl12xx/scan.c @@ -331,12 +331,16 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, j; u32 flags; + bool force_passive = !req->n_ssids; for (i = 0, j = start; i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS; i++) { flags = req->channels[i]->flags; + if (force_passive) + flags |= IEEE80211_CHAN_PASSIVE_SCAN; + if ((req->channels[i]->band == band) && !(flags & IEEE80211_CHAN_DISABLED) && (!!(flags & IEEE80211_CHAN_RADAR) == radar) && @@ -433,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, struct wl1271_cmd_sched_scan_config *cfg = NULL; struct conf_sched_scan_settings *c = &wl->conf.sched_scan; int i, total_channels, ret; + bool force_passive = !req->n_ssids; wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); @@ -456,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) cfg->intervals[i] = cpu_to_le32(req->interval); - if (req->ssids[0].ssid_len && req->ssids[0].ssid) { + if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) { cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC; cfg->ssid_len = req->ssids[0].ssid_len; memcpy(cfg->ssid, req->ssids[0].ssid, @@ -473,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, goto out; } - if (cfg->active[0]) { + if (!force_passive && cfg->active[0]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_2GHZ], @@ -485,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl, } } - if (cfg->active[1]) { + if (!force_passive && cfg->active[1]) { ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid, req->ssids[0].ssid_len, ies->ie[IEEE80211_BAND_5GHZ], -- cgit v1.2.3 From 59342f6a6bc35df623fb44784daa5e1077063b8f Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Mon, 30 May 2011 10:15:47 +0300 Subject: zd1211rw: fix to work on OHCI zd1211 devices register 'EP 4 OUT' endpoint as Interrupt type on USB 2.0: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 However on USB 1.1 endpoint becomes Bulk: Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Commit 37939810b937aba830dd751291fcdc51cae1a6cb assumed that endpoint is always interrupt type and changed usb_bulk_msg() calls to usb_interrupt_msg(). Problem here is that usb_bulk_msg() on interrupt endpoint selfcorrects the call and changes requested pipe to interrupt type (see usb_bulk_msg). However with usb_interrupt_msg() on bulk endpoint does not correct the pipe type to bulk, but instead URB is submitted with interrupt type pipe. So pre-2.6.39 used usb_bulk_msg() and therefore worked with both endpoint types, however in 2.6.39 usb_interrupt_msg() with bulk endpoint causes ohci_hcd to fail submitted URB instantly with -ENOSPC and preventing zd1211rw from working with OHCI. Fix this by detecting endpoint type and using correct endpoint/pipe types for URB. Also fix asynchronous zd_usb_iowrite16v_async() to use right URB type on 'EP 4 OUT'. Cc: stable@kernel.org Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 53 +++++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 0e819943b9e4..631194d49828 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1533,6 +1533,31 @@ static void __exit usb_exit(void) module_init(usb_init); module_exit(usb_exit); +static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len, + int *actual_length, int timeout) +{ + /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in + * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint + * descriptor. + */ + struct usb_host_endpoint *ep; + unsigned int pipe; + + pipe = usb_sndintpipe(udev, EP_REGS_OUT); + ep = usb_pipe_endpoint(udev, pipe); + if (!ep) + return -EINVAL; + + if (usb_endpoint_xfer_int(&ep->desc)) { + return usb_interrupt_msg(udev, pipe, data, len, + actual_length, timeout); + } else { + pipe = usb_sndbulkpipe(udev, EP_REGS_OUT); + return usb_bulk_msg(udev, pipe, data, len, actual_length, + timeout); + } +} + static int usb_int_regs_length(unsigned int count) { return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); @@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, udev = zd_usb_to_usbdev(usb); prepare_read_regs_int(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto error; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; @@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, rw->value = cpu_to_le16(ioreqs[i].value); } - usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, iowrite16v_urb_complete, usb, - ep->desc.bInterval); + /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode + * endpoint is bulk. Select correct type URB by endpoint descriptor. + */ + if (usb_endpoint_xfer_int(&ep->desc)) + usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb, + ep->desc.bInterval); + else + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, iowrite16v_urb_complete, usb); + urb->transfer_flags |= URB_FREE_BUFFER; /* Submit previous URB */ @@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) } udev = zd_usb_to_usbdev(usb); - r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT), - req, req_len, &actual_req_len, 50 /* ms */); + r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/); if (r) { dev_dbg_f(zd_usb_dev(usb), - "error in usb_interrupt_msg(). Error number %d\n", r); + "error in zd_ep_regs_out_msg(). Error number %d\n", r); goto out; } if (req_len != actual_req_len) { - dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()" + dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()" " req_len %d != actual_req_len %d\n", req_len, actual_req_len); r = -EIO; -- cgit v1.2.3 From 1144181c1bc054dc5e001a6f10b4820167e6c883 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 30 May 2011 09:32:52 -0700 Subject: iwlagn: fix incorrect PCI subsystem id for 6150 devices For 6150 devices, modify the supported PCI subsystem ID. Cc: stable@kernel.org Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 28 ++++++++++++++++++---------- drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-agn.h | 1 + 3 files changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index f8c710db6e6f..fda6fe08cf91 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = { IWL_DEVICE_6050, }; +#define IWL_DEVICE_6150 \ + .fw_name_pre = IWL6050_FW_PRE, \ + .ucode_api_max = IWL6050_UCODE_API_MAX, \ + .ucode_api_min = IWL6050_UCODE_API_MIN, \ + .ops = &iwl6150_ops, \ + .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \ + .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \ + .base_params = &iwl6050_base_params, \ + .need_dc_calib = true, \ + .led_mode = IWL_LED_BLINK, \ + .internal_wimax_coex = true + struct iwl_cfg iwl6150_bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN", - .fw_name_pre = IWL6050_FW_PRE, - .ucode_api_max = IWL6050_UCODE_API_MAX, - .ucode_api_min = IWL6050_UCODE_API_MIN, - .eeprom_ver = EEPROM_6150_EEPROM_VERSION, - .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, - .ops = &iwl6150_ops, - .base_params = &iwl6050_base_params, + IWL_DEVICE_6150, .ht_params = &iwl6000_ht_params, - .need_dc_calib = true, - .led_mode = IWL_LED_RF_STATE, - .internal_wimax_coex = true, +}; + +struct iwl_cfg iwl6150_bg_cfg = { + .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG", + IWL_DEVICE_6150, }; struct iwl_cfg iwl6000_3agn_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 11c6c1169e78..a662adcb2adb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 6150 WiFi/WiMax Series */ {IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)}, {IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)}, - {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)}, + {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)}, /* 1000 Series WiFi */ {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h index 2495fe7a58cb..d1716844002e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn.h @@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg; extern struct iwl_cfg iwl6050_2agn_cfg; extern struct iwl_cfg iwl6050_2abg_cfg; extern struct iwl_cfg iwl6150_bgn_cfg; +extern struct iwl_cfg iwl6150_bg_cfg; extern struct iwl_cfg iwl1000_bgn_cfg; extern struct iwl_cfg iwl1000_bg_cfg; extern struct iwl_cfg iwl100_bgn_cfg; -- cgit v1.2.3 From b10cec8a4e8167075b9e1ff3f05419769e7f381a Mon Sep 17 00:00:00 2001 From: Dennis Aberilla Date: Sun, 29 May 2011 11:46:54 +0000 Subject: drivers/net: ks8842 Fix crash on received packet when in PIO mode. This patch fixes a driver crash during packet reception due to not enough bytes allocated in the skb. Since the loop reads out 4 bytes at a time, we need to allow for up to 3 bytes of slack space. Signed-off-by: Dennis Aberilla Signed-off-by: David S. Miller --- drivers/net/ks8842.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c index f0d8346d0fa5..9bd0f551a383 100644 --- a/drivers/net/ks8842.c +++ b/drivers/net/ks8842.c @@ -662,7 +662,7 @@ static void ks8842_rx_frame(struct net_device *netdev, /* check the status */ if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) { - struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len); + struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len + 3); if (skb) { -- cgit v1.2.3 From 930a6eac9f40e692bd9670d89bcd9ac0f4019356 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Mon, 30 May 2011 07:06:24 +0000 Subject: drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() catc_ctrl_run() calls usb_submit_urb() with GFP_KERNEL, while it is called from catc_ctrl_async() and catc_ctrl_done() with catc->ctrl_lock spinlock held. The patch replaces GFP_KERNEL with GFP_ATOMIC. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/usb/catc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index d7221c4a5dcf..8056f8a27c6a 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -495,7 +495,7 @@ static void catc_ctrl_run(struct catc *catc) if (!q->dir && q->buf && q->len) memcpy(catc->ctrl_buf, q->buf, q->len); - if ((status = usb_submit_urb(catc->ctrl_urb, GFP_KERNEL))) + if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC))) err("submit(ctrl_urb) status %d", status); } -- cgit v1.2.3 From 948252cb9e01d65a89ecadf67be5018351eee15e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 31 May 2011 19:27:48 -0700 Subject: Revert "net: fix section mismatches" This reverts commit e5cb966c0838e4da43a3b0751bdcac7fe719f7b4. It causes new build regressions with gcc-4.2 which is pretty common on non-x86 platforms. Reported-by: James Bottomley Signed-off-by: David S. Miller --- drivers/net/3c509.c | 14 ++++++------- drivers/net/3c59x.c | 4 ++-- drivers/net/depca.c | 35 ++++++++++++++++---------------- drivers/net/hp100.c | 12 +++++------ drivers/net/ibmlana.c | 4 ++-- drivers/net/irda/smsc-ircc2.c | 44 ++++++++++++++++++++--------------------- drivers/net/ne3210.c | 15 ++++++-------- drivers/net/smc-mca.c | 6 +++--- drivers/net/tokenring/madgemc.c | 2 +- drivers/net/tulip/de4x5.c | 4 ++-- 10 files changed, 68 insertions(+), 72 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 5f25889e27ef..44b28b2d7003 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -185,7 +185,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -395,7 +395,7 @@ static struct isa_driver el3_isa_driver = { static int isa_registered; #ifdef CONFIG_PNP -static const struct pnp_device_id el3_pnp_ids[] __devinitconst = { +static struct pnp_device_id el3_pnp_ids[] = { { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */ { .id = "TCM5091" }, /* 3Com Etherlink III */ { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */ @@ -478,7 +478,7 @@ static int pnp_registered; #endif /* CONFIG_PNP */ #ifdef CONFIG_EISA -static const struct eisa_device_id el3_eisa_ids[] __devinitconst = { +static struct eisa_device_id el3_eisa_ids[] = { { "TCM5090" }, { "TCM5091" }, { "TCM5092" }, @@ -508,7 +508,7 @@ static int eisa_registered; #ifdef CONFIG_MCA static int el3_mca_probe(struct device *dev); -static const short el3_mca_adapter_ids[] __devinitconst = { +static short el3_mca_adapter_ids[] __initdata = { 0x627c, 0x627d, 0x62db, @@ -517,7 +517,7 @@ static const short el3_mca_adapter_ids[] __devinitconst = { 0x0000 }; -static const char *const el3_mca_adapter_names[] __devinitconst = { +static char *el3_mca_adapter_names[] __initdata = { "3Com 3c529 EtherLink III (10base2)", "3Com 3c529 EtherLink III (10baseT)", "3Com 3c529 EtherLink III (test mode)", @@ -601,7 +601,7 @@ static void el3_common_remove (struct net_device *dev) } #ifdef CONFIG_MCA -static int __devinit el3_mca_probe(struct device *device) +static int __init el3_mca_probe(struct device *device) { /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, * heavily modified by Chris Beauregard @@ -671,7 +671,7 @@ static int __devinit el3_mca_probe(struct device *device) #endif /* CONFIG_MCA */ #ifdef CONFIG_EISA -static int __devinit el3_eisa_probe (struct device *device) +static int __init el3_eisa_probe (struct device *device) { short i; int ioaddr, irq, if_port; diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 99f43d275442..8cc22568ebd3 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -901,14 +901,14 @@ static const struct dev_pm_ops vortex_pm_ops = { #endif /* !CONFIG_PM */ #ifdef CONFIG_EISA -static const struct eisa_device_id vortex_eisa_ids[] __devinitconst = { +static struct eisa_device_id vortex_eisa_ids[] = { { "TCM5920", CH_3C592 }, { "TCM5970", CH_3C597 }, { "" } }; MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); -static int __devinit vortex_eisa_probe(struct device *device) +static int __init vortex_eisa_probe(struct device *device) { void __iomem *ioaddr; struct eisa_device *edev; diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 17654059922d..8b0084d17c8c 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -331,18 +331,18 @@ static struct { "DE422",\ ""} -static const char* const depca_signature[] __devinitconst = DEPCA_SIGNATURE; +static char* __initdata depca_signature[] = DEPCA_SIGNATURE; enum depca_type { DEPCA, de100, de101, de200, de201, de202, de210, de212, de422, unknown }; -static const char depca_string[] = "depca"; +static char depca_string[] = "depca"; static int depca_device_remove (struct device *device); #ifdef CONFIG_EISA -static const struct eisa_device_id depca_eisa_ids[] __devinitconst = { +static struct eisa_device_id depca_eisa_ids[] = { { "DEC4220", de422 }, { "" } }; @@ -367,19 +367,19 @@ static struct eisa_driver depca_eisa_driver = { #define DE210_ID 0x628d #define DE212_ID 0x6def -static const short depca_mca_adapter_ids[] __devinitconst = { +static short depca_mca_adapter_ids[] = { DE210_ID, DE212_ID, 0x0000 }; -static const char *depca_mca_adapter_name[] = { +static char *depca_mca_adapter_name[] = { "DEC EtherWORKS MC Adapter (DE210)", "DEC EtherWORKS MC Adapter (DE212)", NULL }; -static const enum depca_type depca_mca_adapter_type[] = { +static enum depca_type depca_mca_adapter_type[] = { de210, de212, 0 @@ -541,9 +541,10 @@ static void SetMulticastFilter(struct net_device *dev); static int load_packet(struct net_device *dev, struct sk_buff *skb); static void depca_dbg_open(struct net_device *dev); -static const u_char de1xx_irq[] __devinitconst = { 2, 3, 4, 5, 7, 9, 0 }; -static const u_char de2xx_irq[] __devinitconst = { 5, 9, 10, 11, 15, 0 }; -static const u_char de422_irq[] __devinitconst = { 5, 9, 10, 11, 0 }; +static u_char de1xx_irq[] __initdata = { 2, 3, 4, 5, 7, 9, 0 }; +static u_char de2xx_irq[] __initdata = { 5, 9, 10, 11, 15, 0 }; +static u_char de422_irq[] __initdata = { 5, 9, 10, 11, 0 }; +static u_char *depca_irq; static int irq; static int io; @@ -579,7 +580,7 @@ static const struct net_device_ops depca_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -static int __devinit depca_hw_init (struct net_device *dev, struct device *device) +static int __init depca_hw_init (struct net_device *dev, struct device *device) { struct depca_private *lp; int i, j, offset, netRAM, mem_len, status = 0; @@ -747,7 +748,6 @@ static int __devinit depca_hw_init (struct net_device *dev, struct device *devic if (dev->irq < 2) { unsigned char irqnum; unsigned long irq_mask, delay; - const u_char *depca_irq; irq_mask = probe_irq_on(); @@ -770,7 +770,6 @@ static int __devinit depca_hw_init (struct net_device *dev, struct device *devic break; default: - depca_irq = NULL; break; /* Not reached */ } @@ -1303,7 +1302,7 @@ static void SetMulticastFilter(struct net_device *dev) } } -static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp) +static int __init depca_common_init (u_long ioaddr, struct net_device **devp) { int status = 0; @@ -1334,7 +1333,7 @@ static int __devinit depca_common_init (u_long ioaddr, struct net_device **devp) /* ** Microchannel bus I/O device probe */ -static int __devinit depca_mca_probe(struct device *device) +static int __init depca_mca_probe(struct device *device) { unsigned char pos[2]; unsigned char where; @@ -1458,7 +1457,7 @@ static int __devinit depca_mca_probe(struct device *device) ** ISA bus I/O device probe */ -static void __devinit depca_platform_probe (void) +static void __init depca_platform_probe (void) { int i; struct platform_device *pldev; @@ -1498,7 +1497,7 @@ static void __devinit depca_platform_probe (void) } } -static enum depca_type __devinit depca_shmem_probe (ulong *mem_start) +static enum depca_type __init depca_shmem_probe (ulong *mem_start) { u_long mem_base[] = DEPCA_RAM_BASE_ADDRESSES; enum depca_type adapter = unknown; @@ -1559,7 +1558,7 @@ static int __devinit depca_isa_probe (struct platform_device *device) */ #ifdef CONFIG_EISA -static int __devinit depca_eisa_probe (struct device *device) +static int __init depca_eisa_probe (struct device *device) { enum depca_type adapter = unknown; struct eisa_device *edev; @@ -1630,7 +1629,7 @@ static int __devexit depca_device_remove (struct device *device) ** and Boot (readb) ROM. This will also give us a clue to the network RAM ** base address. */ -static int __devinit DepcaSignature(char *name, u_long base_addr) +static int __init DepcaSignature(char *name, u_long base_addr) { u_int i, j, k; void __iomem *ptr; diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index c52a1df5d922..8e10d2f6a5ad 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -188,14 +188,14 @@ struct hp100_private { * variables */ #ifdef CONFIG_ISA -static const char *const hp100_isa_tbl[] __devinitconst = { +static const char *hp100_isa_tbl[] = { "HWPF150", /* HP J2573 rev A */ "HWP1950", /* HP J2573 */ }; #endif #ifdef CONFIG_EISA -static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = { +static struct eisa_device_id hp100_eisa_tbl[] = { { "HWPF180" }, /* HP J2577 rev A */ { "HWP1920" }, /* HP 27248B */ { "HWP1940" }, /* HP J2577 */ @@ -336,7 +336,7 @@ static __devinit const char *hp100_read_id(int ioaddr) } #ifdef CONFIG_ISA -static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr) +static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) { const char *sig; int i; @@ -372,7 +372,7 @@ static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr) * EISA and PCI are handled by device infrastructure. */ -static int __devinit hp100_isa_probe(struct net_device *dev, int addr) +static int __init hp100_isa_probe(struct net_device *dev, int addr) { int err = -ENODEV; @@ -396,7 +396,7 @@ static int __devinit hp100_isa_probe(struct net_device *dev, int addr) #endif /* CONFIG_ISA */ #if !defined(MODULE) && defined(CONFIG_ISA) -struct net_device * __devinit hp100_probe(int unit) +struct net_device * __init hp100_probe(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); int err; @@ -2843,7 +2843,7 @@ static void cleanup_dev(struct net_device *d) } #ifdef CONFIG_EISA -static int __devinit hp100_eisa_probe (struct device *gendev) +static int __init hp100_eisa_probe (struct device *gendev) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); struct eisa_device *edev = to_eisa_device(gendev); diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 136d7544cc33..a7d6cad32953 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -895,12 +895,12 @@ static int ibmlana_irq; static int ibmlana_io; static int startslot; /* counts through slots when probing multiple devices */ -static const short ibmlana_adapter_ids[] __devinitconst = { +static short ibmlana_adapter_ids[] __initdata = { IBM_LANA_ID, 0x0000 }; -static const char *const ibmlana_adapter_names[] __devinitconst = { +static char *ibmlana_adapter_names[] __devinitdata = { "IBM LAN Adapter/A", NULL }; diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 69b5707db369..8800e1fe4129 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -222,19 +222,19 @@ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 s static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); /* Probing */ -static int smsc_ircc_look_for_chips(void); -static const struct smsc_chip * smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); -static int smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); -static int smsc_superio_fdc(unsigned short cfg_base); -static int smsc_superio_lpc(unsigned short cfg_base); +static int __init smsc_ircc_look_for_chips(void); +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); +static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); +static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); +static int __init smsc_superio_fdc(unsigned short cfg_base); +static int __init smsc_superio_lpc(unsigned short cfg_base); #ifdef CONFIG_PCI -static int preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); -static int preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static void preconfigure_ali_port(struct pci_dev *dev, +static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf); +static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); +static void __init preconfigure_ali_port(struct pci_dev *dev, unsigned short port); -static int preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); -static int smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, +static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf); +static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, unsigned short ircc_fir, unsigned short ircc_sir, unsigned char ircc_dma, @@ -366,7 +366,7 @@ static inline void register_bank(int iobase, int bank) } /* PNP hotplug support */ -static const struct pnp_device_id smsc_ircc_pnp_table[] __devinitconst = { +static const struct pnp_device_id smsc_ircc_pnp_table[] = { { .id = "SMCf010", .driver_data = 0 }, /* and presumably others */ { } @@ -515,7 +515,7 @@ static const struct net_device_ops smsc_ircc_netdev_ops = { * Try to open driver instance * */ -static int __devinit smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) +static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) { struct smsc_ircc_cb *self; struct net_device *dev; @@ -2273,7 +2273,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho } -static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg) +static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { IRDA_DEBUG(1, "%s\n", __func__); @@ -2281,7 +2281,7 @@ static int __devinit smsc_access(unsigned short cfg_base, unsigned char reg) return inb(cfg_base) != reg ? -1 : 0; } -static const struct smsc_chip * __devinit smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) +static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) { u8 devid, xdevid, rev; @@ -2406,7 +2406,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) #ifdef CONFIG_PCI #define PCIID_VENDOR_INTEL 0x8086 #define PCIID_VENDOR_ALI 0x10b9 -static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] __devinitconst = { +static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { /* * Subsystems needing entries: * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family @@ -2532,7 +2532,7 @@ static const struct smsc_ircc_subsystem_configuration subsystem_configurations[] * (FIR port, SIR port, FIR DMA, FIR IRQ) * through the chip configuration port. */ -static int __devinit preconfigure_smsc_chip(struct +static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf) { @@ -2633,7 +2633,7 @@ static int __devinit preconfigure_smsc_chip(struct * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. * They all work the same way! */ -static int __devinit preconfigure_through_82801(struct pci_dev *dev, +static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf) @@ -2786,7 +2786,7 @@ static int __devinit preconfigure_through_82801(struct pci_dev *dev, * This is based on reverse-engineering since ALi does not * provide any data sheet for the 1533 chip. */ -static void __devinit preconfigure_ali_port(struct pci_dev *dev, +static void __init preconfigure_ali_port(struct pci_dev *dev, unsigned short port) { unsigned char reg; @@ -2824,7 +2824,7 @@ static void __devinit preconfigure_ali_port(struct pci_dev *dev, IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port); } -static int __devinit preconfigure_through_ali(struct pci_dev *dev, +static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf) @@ -2837,7 +2837,7 @@ static int __devinit preconfigure_through_ali(struct pci_dev *dev, return preconfigure_smsc_chip(conf); } -static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, +static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, unsigned short ircc_fir, unsigned short ircc_sir, unsigned char ircc_dma, @@ -2849,7 +2849,7 @@ static int __devinit smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, int ret = 0; for_each_pci_dev(dev) { - const struct smsc_ircc_subsystem_configuration *conf; + struct smsc_ircc_subsystem_configuration *conf; /* * Cache the subsystem vendor/device: diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c index e8984b0ca521..243ed2aee88e 100644 --- a/drivers/net/ne3210.c +++ b/drivers/net/ne3210.c @@ -80,20 +80,17 @@ static void ne3210_block_output(struct net_device *dev, int count, const unsigne #define NE3210_DEBUG 0x0 -static const unsigned char irq_map[] __devinitconst = - { 15, 12, 11, 10, 9, 7, 5, 3 }; -static const unsigned int shmem_map[] __devinitconst = - { 0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0 }; -static const char *const ifmap[] __devinitconst = - { "UTP", "?", "BNC", "AUI" }; -static const int ifmap_val[] __devinitconst = { +static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3}; +static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0}; +static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"}; +static int ifmap_val[] __initdata = { IF_PORT_10BASET, IF_PORT_UNKNOWN, IF_PORT_10BASE2, IF_PORT_AUI, }; -static int __devinit ne3210_eisa_probe (struct device *device) +static int __init ne3210_eisa_probe (struct device *device) { unsigned long ioaddr, phys_mem; int i, retval, port_index; @@ -316,7 +313,7 @@ static void ne3210_block_output(struct net_device *dev, int count, memcpy_toio(shmem, buf, count); } -static const struct eisa_device_id ne3210_ids[] __devinitconst = { +static struct eisa_device_id ne3210_ids[] = { { "EGL0101" }, { "NVL1801" }, { "" }, diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c index 0f29f261fcfe..d07c39cb4daf 100644 --- a/drivers/net/smc-mca.c +++ b/drivers/net/smc-mca.c @@ -156,7 +156,7 @@ static const struct { { 14, 15 } }; -static const short smc_mca_adapter_ids[] __devinitconst = { +static short smc_mca_adapter_ids[] __initdata = { 0x61c8, 0x61c9, 0x6fc0, @@ -168,7 +168,7 @@ static const short smc_mca_adapter_ids[] __devinitconst = { 0x0000 }; -static const char *const smc_mca_adapter_names[] __devinitconst = { +static char *smc_mca_adapter_names[] __initdata = { "SMC Ethercard PLUS Elite/A BNC/AUI (WD8013EP/A)", "SMC Ethercard PLUS Elite/A UTP/AUI (WD8013WP/A)", "WD Ethercard PLUS/A (WD8003E/A or WD8003ET/A)", @@ -199,7 +199,7 @@ static const struct net_device_ops ultramca_netdev_ops = { #endif }; -static int __devinit ultramca_probe(struct device *gen_dev) +static int __init ultramca_probe(struct device *gen_dev) { unsigned short ioaddr; struct net_device *dev; diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 1313aa1315f0..2bedc0ace812 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -727,7 +727,7 @@ static int __devexit madgemc_remove(struct device *device) return 0; } -static const short madgemc_adapter_ids[] __devinitconst = { +static short madgemc_adapter_ids[] __initdata = { 0x002d, 0x0000 }; diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index 45144d5bd11b..efaa1d69b720 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -1995,7 +1995,7 @@ SetMulticastFilter(struct net_device *dev) static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; -static int __devinit de4x5_eisa_probe (struct device *gendev) +static int __init de4x5_eisa_probe (struct device *gendev) { struct eisa_device *edev; u_long iobase; @@ -2097,7 +2097,7 @@ static int __devexit de4x5_eisa_remove (struct device *device) return 0; } -static const struct eisa_device_id de4x5_eisa_ids[] __devinitconst = { +static struct eisa_device_id de4x5_eisa_ids[] = { { "DEC4250", 0 }, /* 0 is the board name index... */ { "" } }; -- cgit v1.2.3 From 21fdc87248d1d28492c775e05fa92b3c8c7bc8db Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Tue, 31 May 2011 11:59:30 -0700 Subject: ath9k: fix two more bugs in tx power This is the same fix as commit 841051602e3fa18ea468fe5a177aa92b6eb44b56 Author: Matteo Croce Date: Fri Dec 3 02:25:08 2010 +0100 The ath9k driver subtracts 3 dBm to the txpower as with two radios the signal power is doubled. The resulting value is assigned in an u16 which overflows and makes the card work at full power. in two more places. I grepped the ath tree and didn't find any others. Cc: stable@kernel.org Signed-off-by: Daniel Halperin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++++++-- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 10 ++++++++-- 2 files changed, 16 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 0ca7635d0669..ff8150e46f0e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 7856f0d4512d..343fc9f946db 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah, case 1: break; case 2: - scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + else + scaledPower = 0; break; case 3: - scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + else + scaledPower = 0; break; } scaledPower = max((u16)0, scaledPower); -- cgit v1.2.3 From dfe21582ac5ebc460dda98c67e8589dd506d02cd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 1 Jun 2011 17:17:57 +0200 Subject: iwl4965: correctly validate temperature value In some cases we can read wrong temperature value. If after that temperature value will not be updated to good one, we badly configure tx power parameters and device is unable to send a data. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=35932 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index f5433c74b845..f9db25bb35c3 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv) s32 temp; temp = iwl4965_hw_get_temperature(priv); - if (temp < 0) + if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp)) return; if (priv->temperature != temp) { -- cgit v1.2.3 From 85e3c65fa3a1d0542c181510a950a2be7733ff29 Mon Sep 17 00:00:00 2001 From: Stefan Metzmacher Date: Wed, 1 Jun 2011 02:01:41 +0000 Subject: usbnet/cdc_ncm: add missing .reset_resume hook This avoids messages like this after suspend: cdc_ncm 2-1.4:1.6: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.7: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM This is important for the Ericsson F5521gw GSM/UMTS modem. Otherwise modemmanager looses the fact that the cdc_ncm and cdc_acm devices belong together. The cdc_ether module does the same. Signed-off-by: Stefan Metzmacher Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index cdd3ae486109..f33ca6aa29e9 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -54,7 +54,7 @@ #include #include -#define DRIVER_VERSION "24-May-2011" +#define DRIVER_VERSION "01-June-2011" /* CDC NCM subclass 3.2.1 */ #define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 @@ -1234,6 +1234,7 @@ static struct usb_driver cdc_ncm_driver = { .disconnect = cdc_ncm_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, + .reset_resume = usbnet_resume, .supports_autosuspend = 1, }; -- cgit v1.2.3 From b722dbf176b67c75fe0f5a6b1b31f5ea8aa6117d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 1 Jun 2011 07:10:10 +0000 Subject: drivers/net/davinci_emac.c: add missing clk_put Go to existing error handling code at the end of the function that calls clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // Signed-off-by: Julia Lawall Acked-by: Kevin Hilman Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 29a4f06fbfcf..dcc4a170b0f3 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -1781,8 +1781,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) ndev = alloc_etherdev(sizeof(struct emac_priv)); if (!ndev) { dev_err(&pdev->dev, "error allocating net_device\n"); - clk_put(emac_clk); - return -ENOMEM; + rc = -ENOMEM; + goto free_clk; } platform_set_drvdata(pdev, ndev); @@ -1796,7 +1796,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data\n"); - return -ENODEV; + rc = -ENODEV; + goto probe_quit; } /* MAC addr and PHY mask , RMII enable info from platform_data */ @@ -1929,8 +1930,9 @@ no_dma: iounmap(priv->remap_addr); probe_quit: - clk_put(emac_clk); free_netdev(ndev); +free_clk: + clk_put(emac_clk); return rc; } -- cgit v1.2.3 From 6979d5dd96a4a4975ce240982436e92a3da23315 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Jun 2011 10:18:09 +0000 Subject: net: dm9000: Get the chip in a known good state before enabling interrupts Currently the DM9000 driver requests the primary interrupt before it resets the chip and puts it into a known good state. This means that if the chip is asserting interrupt for some reason we can end up with a screaming IRQ that the interrupt handler is unable to deal with. Avoid this by only requesting the interrupt after we've reset the chip so we know what state it's in. This started manifesting itself on one of my boards in the past month or so, I suspect as a result of some core infrastructure changes removing some form of mitigation against bad behaviour here, even when things boot it seems that the new code brings the interface up more quickly. Signed-off-by: Mark Brown Signed-off-by: David S. Miller --- drivers/net/dm9000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index fbaff3584bd4..ee597e676ee5 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1157,9 +1157,6 @@ dm9000_open(struct net_device *dev) irqflags |= IRQF_SHARED; - if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) - return -EAGAIN; - /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ mdelay(1); /* delay needs by DM9000B */ @@ -1168,6 +1165,9 @@ dm9000_open(struct net_device *dev) dm9000_reset(db); dm9000_init_dm9000(dev); + if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev)) + return -EAGAIN; + /* Init driver variable */ db->dbug_cnt = 0; -- cgit v1.2.3 From 2e4ceec4edaef6e903422792de4f7f37de98cec6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 1 Jun 2011 19:48:50 +0000 Subject: drivers/net/can/flexcan.c: add missing clk_put The failed_get label is used after the call to clk_get has succeeded, so it should be moved up above the call to clk_put. The failed_req labels doesn't do anything different than failed_get, so delete it. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/can/flexcan.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index d4990568baee..17678117ed69 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -923,7 +923,7 @@ static int __devinit flexcan_probe(struct platform_device *pdev) mem_size = resource_size(mem); if (!request_mem_region(mem->start, mem_size, pdev->name)) { err = -EBUSY; - goto failed_req; + goto failed_get; } base = ioremap(mem->start, mem_size); @@ -977,9 +977,8 @@ static int __devinit flexcan_probe(struct platform_device *pdev) iounmap(base); failed_map: release_mem_region(mem->start, mem_size); - failed_req: - clk_put(clk); failed_get: + clk_put(clk); failed_clock: return err; } -- cgit v1.2.3 From 9a2e0fb0893ddf595d0a372e681f5b98017c6d90 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Thu, 2 Jun 2011 13:01:39 +0000 Subject: tg3: Fix tg3_skb_error_unmap() This function attempts to free one fragment beyond the number of fragments that were actually mapped. This patch brings back the limit to the correct spot. Signed-off-by: Matt Carlson Tested-by: Alex Williamson Signed-off-by: David S. Miller --- drivers/net/tg3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f4b01c638a33..a1f9f9eef37d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -5774,7 +5774,7 @@ static void tg3_skb_error_unmap(struct tg3_napi *tnapi, dma_unmap_addr(txb, mapping), skb_headlen(skb), PCI_DMA_TODEVICE); - for (i = 0; i <= last; i++) { + for (i = 0; i < last; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; entry = NEXT_TX(entry); -- cgit v1.2.3 From a99168eece601d2a79ecfcb968ce226f2f30cf98 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Thu, 2 Jun 2011 03:09:48 +0300 Subject: ath5k: Disable fast channel switching by default Disable fast channel change by default on AR2413/AR5413 due to some bug reports (it still works for me but it's better to be safe). Add a module parameter "fastchanswitch" in case anyone wants to enable it and play with it. Signed-off-by: Nick Kossifidis Tested-by: Sedat Dilek Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 11 ++++++++++- drivers/net/wireless/ath/ath5k/reset.c | 5 ++++- 2 files changed, 14 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 22047628ccfa..b6c5d3715b96 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -72,6 +72,11 @@ static int modparam_all_channels; module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO); MODULE_PARM_DESC(all_channels, "Expose all channels the device can use."); +static int modparam_fastchanswitch; +module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO); +MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios."); + + /* Module info */ MODULE_AUTHOR("Jiri Slaby"); MODULE_AUTHOR("Nick Kossifidis"); @@ -2686,6 +2691,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, struct ath5k_hw *ah = sc->ah; struct ath_common *common = ath5k_hw_common(ah); int ret, ani_mode; + bool fast; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); @@ -2705,7 +2711,10 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan, ath5k_drain_tx_buffs(sc); if (chan) sc->curchan = chan; - ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL, + + fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0; + + ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast, skip_pcu); if (ret) { ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret); diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 3510de2cf622..126a4eab35f3 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -1124,8 +1124,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* Non fatal, can happen eg. * on mode change */ ret = 0; - } else + } else { + ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET, + "fast chan change successful\n"); return 0; + } } /* -- cgit v1.2.3 From 6f213ff1919fab6f8244ceae55631b5d6ef750a7 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 2 Jun 2011 18:17:15 +0200 Subject: iwlagn: fix channel switch locking We use priv->mutex to avoid race conditions between iwl_chswitch_done() and iwlagn_mac_channel_switch(), when marking channel switch in progress. But iwl_chswitch_done() can be called in atomic context from iwl_rx_csa() or with mutex already taken from iwlagn_commit_rxon(). These bugs were introduced by: commit 79d07325502e73508f917475bc1617b60979dd94 Author: Wey-Yi Guy Date: Thu May 6 08:54:11 2010 -0700 iwlwifi: support channel switch offload in driver To fix remove mutex from iwl_chswitch_done() and use atomic bitops for marking channel switch pending. Also remove iwl2030_hw_channel_switch() since 2000 series adapters are 2.4GHz only devices. Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-2000.c | 74 ----------------------------- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 - drivers/net/wireless/iwlwifi/iwl-6000.c | 2 - drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 6 +-- drivers/net/wireless/iwlwifi/iwl-agn.c | 19 ++++---- drivers/net/wireless/iwlwifi/iwl-core.c | 6 +-- drivers/net/wireless/iwlwifi/iwl-core.h | 1 + drivers/net/wireless/iwlwifi/iwl-dev.h | 13 +---- drivers/net/wireless/iwlwifi/iwl-rx.c | 24 +++++----- 9 files changed, 28 insertions(+), 119 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 86feec86d130..2282279cffc4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -177,79 +177,6 @@ static int iwl2000_hw_set_hw_params(struct iwl_priv *priv) return 0; } -static int iwl2030_hw_channel_switch(struct iwl_priv *priv, - struct ieee80211_channel_switch *ch_switch) -{ - /* - * MULTI-FIXME - * See iwl_mac_channel_switch. - */ - struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; - struct iwl6000_channel_switch_cmd cmd; - const struct iwl_channel_info *ch_info; - u32 switch_time_in_usec, ucode_switch_time; - u16 ch; - u32 tsf_low; - u8 switch_count; - u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval); - struct ieee80211_vif *vif = ctx->vif; - struct iwl_host_cmd hcmd = { - .id = REPLY_CHANNEL_SWITCH, - .len = { sizeof(cmd), }, - .flags = CMD_SYNC, - .data = { &cmd, }, - }; - - cmd.band = priv->band == IEEE80211_BAND_2GHZ; - ch = ch_switch->channel->hw_value; - IWL_DEBUG_11H(priv, "channel switch from %u to %u\n", - ctx->active.channel, ch); - cmd.channel = cpu_to_le16(ch); - cmd.rxon_flags = ctx->staging.flags; - cmd.rxon_filter_flags = ctx->staging.filter_flags; - switch_count = ch_switch->count; - tsf_low = ch_switch->timestamp & 0x0ffffffff; - /* - * calculate the ucode channel switch time - * adding TSF as one of the factor for when to switch - */ - if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) { - if (switch_count > ((priv->ucode_beacon_time - tsf_low) / - beacon_interval)) { - switch_count -= (priv->ucode_beacon_time - - tsf_low) / beacon_interval; - } else - switch_count = 0; - } - if (switch_count <= 1) - cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time); - else { - switch_time_in_usec = - vif->bss_conf.beacon_int * switch_count * TIME_UNIT; - ucode_switch_time = iwl_usecs_to_beacons(priv, - switch_time_in_usec, - beacon_interval); - cmd.switch_time = iwl_add_beacon_time(priv, - priv->ucode_beacon_time, - ucode_switch_time, - beacon_interval); - } - IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n", - cmd.switch_time); - ch_info = iwl_get_channel_info(priv, priv->band, ch); - if (ch_info) - cmd.expect_beacon = is_channel_radar(ch_info); - else { - IWL_ERR(priv, "invalid channel switch from %u to %u\n", - ctx->active.channel, ch); - return -EFAULT; - } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - - return iwl_send_cmd_sync(priv, &hcmd); -} - static struct iwl_lib_ops iwl2000_lib = { .set_hw_params = iwl2000_hw_set_hw_params, .rx_handler_setup = iwlagn_rx_handler_setup, @@ -258,7 +185,6 @@ static struct iwl_lib_ops iwl2000_lib = { .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr, .send_tx_power = iwlagn_send_tx_power, .update_chain_flags = iwl_update_chain_flags, - .set_channel_switch = iwl2030_hw_channel_switch, .apm_ops = { .init = iwl_apm_init, .config = iwl2000_nic_config, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a70b8cfafda1..5b721c56aee9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -331,8 +331,6 @@ static int iwl5000_hw_channel_switch(struct iwl_priv *priv, ctx->active.channel, ch); return -EFAULT; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index fda6fe08cf91..fbe565c816e3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -270,8 +270,6 @@ static int iwl6000_hw_channel_switch(struct iwl_priv *priv, ctx->active.channel, ch); return -EFAULT; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; return iwl_send_cmd_sync(priv, &hcmd); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index a95ad84c5377..2532c7db3aff 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -342,10 +342,10 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) * receive commit_rxon request * abort any previous channel switch if still in process */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); + le16_to_cpu(priv->switch_channel)); iwl_chswitch_done(priv, false); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index a662adcb2adb..8e1942ebd9a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2843,16 +2843,13 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, goto out; if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) goto out; if (!iwl_is_associated_ctx(ctx)) goto out; - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out; - if (priv->cfg->ops->lib->set_channel_switch) { ch = channel->hw_value; @@ -2901,15 +2898,19 @@ static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; + ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, + &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } } } out: mutex_unlock(&priv->mutex); - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); IWL_DEBUG_MAC80211(priv, "leave\n"); } diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4653deada05b..213c80c6a668 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -843,12 +843,8 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } #ifdef CONFIG_IWLWIFI_DEBUG diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 3bb76f6ea410..a54d416ec345 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -560,6 +560,7 @@ void iwlcore_free_geos(struct iwl_priv *priv); #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 #define STATUS_DEVICE_ENABLED 18 +#define STATUS_CHANNEL_SWITCH_PENDING 19 static inline int iwl_is_ready(struct iwl_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 22a6e3ec7094..c8de236c141b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -981,17 +981,6 @@ struct traffic_stats { #endif }; -/* - * iwl_switch_rxon: "channel switch" structure - * - * @ switch_in_progress: channel switch in progress - * @ channel: new channel - */ -struct iwl_switch_rxon { - bool switch_in_progress; - __le16 channel; -}; - /* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled @@ -1287,7 +1276,7 @@ struct iwl_priv { struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - struct iwl_switch_rxon switch_rxon; + __le16 switch_channel; struct { u32 error_event_table; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index 0053e9ea9021..b774517aa9fa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -250,19 +250,19 @@ static void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_cmd *rxon = (void *)&ctx->active; - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", le16_to_cpu(csa->channel)); - iwl_chswitch_done(priv, false); - } + iwl_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_chswitch_done(priv, false); } } -- cgit v1.2.3 From d2ac49fe3c7c4730323c1042fb53a2e008643b6a Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Fri, 3 Jun 2011 00:13:26 +0100 Subject: libertas_sdio: handle spurious interrupts Commit 06e8935febe687e2a561707d4c7ca4245d261dbe adds an IRQ handling optimization for single-function SDIO cards like this one, but at the same time exposes a small hardware bug. During hardware init, an interrupt is generated with (apparently) no source. Previously, mmc threw this interrupt away, but now (due to the optimization), the mmc layer passes this onto libertas, before it is ready (and before it has enabled interrupts), causing a crash. Work around this hardware bug by registering the IRQ handler later and making it capable of handling interrupts with no cause. The change that makes the IRQ handler registration happen later actually eliminates the spurious interrupt as well. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index a7b5cb0c2753..224e9853c480 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -907,7 +907,7 @@ static void if_sdio_interrupt(struct sdio_func *func) card = sdio_get_drvdata(func); cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret); - if (ret) + if (ret || !cause) goto out; lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause); @@ -1008,10 +1008,6 @@ static int if_sdio_probe(struct sdio_func *func, if (ret) goto release; - ret = sdio_claim_irq(func, if_sdio_interrupt); - if (ret) - goto disable; - /* For 1-bit transfers to the 8686 model, we need to enable the * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0 * bit to allow access to non-vendor registers. */ @@ -1082,6 +1078,21 @@ static int if_sdio_probe(struct sdio_func *func, else card->rx_unit = 0; + /* + * Set up the interrupt handler late. + * + * If we set it up earlier, the (buggy) hardware generates a spurious + * interrupt, even before the interrupt has been enabled, with + * CCCR_INTx = 0. + * + * We register the interrupt handler late so that we can handle any + * spurious interrupts, and also to avoid generation of that known + * spurious interrupt in the first place. + */ + ret = sdio_claim_irq(func, if_sdio_interrupt); + if (ret) + goto disable; + /* * Enable interrupts now that everything is set up */ -- cgit v1.2.3 From 55db4c64eddf37e31279ec15fe90314713bc9cfa Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 4 Jun 2011 06:33:24 +0900 Subject: Revert "tty: make receive_buf() return the amout of bytes received" This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt Reported-by: Milton Miller Cc: Stefan Bigler Cc: Toby Gray Cc: Felipe Balbi Cc: Greg Kroah-Hartman Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ldisc.c | 17 ++++------- drivers/input/serio/serport.c | 10 ++----- drivers/isdn/gigaset/ser-gigaset.c | 8 ++--- drivers/misc/ti-st/st_core.c | 6 ++-- drivers/net/caif/caif_serial.c | 6 ++-- drivers/net/can/slcan.c | 9 ++---- drivers/net/hamradio/6pack.c | 8 ++--- drivers/net/hamradio/mkiss.c | 11 +++---- drivers/net/irda/irtty-sir.c | 16 +++++----- drivers/net/ppp_async.c | 6 ++-- drivers/net/ppp_synctty.c | 6 ++-- drivers/net/slip.c | 11 +++---- drivers/net/wan/x25_asy.c | 7 ++--- drivers/tty/n_gsm.c | 6 ++-- drivers/tty/n_hdlc.c | 18 +++++------ drivers/tty/n_r3964.c | 10 +++---- drivers/tty/n_tty.c | 61 +++++++++++++++++++++++++++++--------- drivers/tty/tty_buffer.c | 15 ++++------ drivers/tty/vt/selection.c | 3 +- include/linux/tty_ldisc.h | 9 +++--- 20 files changed, 115 insertions(+), 128 deletions(-) (limited to 'drivers/net') diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index b3f01996318f..48ad2a7ab080 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -355,29 +355,24 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty) * flags pointer to flags for data * count count of received data in bytes * - * Return Value: Number of bytes received + * Return Value: None */ -static unsigned int hci_uart_tty_receive(struct tty_struct *tty, - const u8 *data, char *flags, int count) +static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count) { struct hci_uart *hu = (void *)tty->disc_data; - int received; if (!hu || tty != hu->tty) - return -ENODEV; + return; if (!test_bit(HCI_UART_PROTO_SET, &hu->flags)) - return -EINVAL; + return; spin_lock(&hu->rx_lock); - received = hu->proto->recv(hu, (void *) data, count); - if (received > 0) - hu->hdev->stat.byte_rx += received; + hu->proto->recv(hu, (void *) data, count); + hu->hdev->stat.byte_rx += count; spin_unlock(&hu->rx_lock); tty_unthrottle(tty); - - return received; } static int hci_uart_register_dev(struct hci_uart *hu) diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index f3698967edf6..8755f5f3ad37 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -120,21 +120,17 @@ static void serport_ldisc_close(struct tty_struct *tty) * 'interrupt' routine. */ -static unsigned int serport_ldisc_receive(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; unsigned long flags; unsigned int ch_flags; - int ret = 0; int i; spin_lock_irqsave(&serport->lock, flags); - if (!test_bit(SERPORT_ACTIVE, &serport->flags)) { - ret = -EINVAL; + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) goto out; - } for (i = 0; i < count; i++) { switch (fp[i]) { @@ -156,8 +152,6 @@ static unsigned int serport_ldisc_receive(struct tty_struct *tty, out: spin_unlock_irqrestore(&serport->lock, flags); - - return ret == 0 ? count : ret; } /* diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c index 1d44d470897c..86a5c4f7775e 100644 --- a/drivers/isdn/gigaset/ser-gigaset.c +++ b/drivers/isdn/gigaset/ser-gigaset.c @@ -674,7 +674,7 @@ gigaset_tty_ioctl(struct tty_struct *tty, struct file *file, * cflags buffer containing error flags for received characters (ignored) * count number of received characters */ -static unsigned int +static void gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -683,12 +683,12 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, struct inbuf_t *inbuf; if (!cs) - return -ENODEV; + return; inbuf = cs->inbuf; if (!inbuf) { dev_err(cs->dev, "%s: no inbuf\n", __func__); cs_put(cs); - return -EINVAL; + return; } tail = inbuf->tail; @@ -725,8 +725,6 @@ gigaset_tty_receive(struct tty_struct *tty, const unsigned char *buf, gig_dbg(DEBUG_INTR, "%s-->BH", __func__); gigaset_schedule_event(cs); cs_put(cs); - - return count; } /* diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 1a05fe08e2cb..f91f82eabda7 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -747,8 +747,8 @@ static void st_tty_close(struct tty_struct *tty) pr_debug("%s: done ", __func__); } -static unsigned int st_tty_receive(struct tty_struct *tty, - const unsigned char *data, char *tty_flags, int count) +static void st_tty_receive(struct tty_struct *tty, const unsigned char *data, + char *tty_flags, int count) { #ifdef VERBOSE print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE, @@ -761,8 +761,6 @@ static unsigned int st_tty_receive(struct tty_struct *tty, */ st_recv(tty->disc_data, data, count); pr_debug("done %s", __func__); - - return count; } /* wake-up function called in from the TTY layer diff --git a/drivers/net/caif/caif_serial.c b/drivers/net/caif/caif_serial.c index 73c7e03617ec..3df0c0f8b8bf 100644 --- a/drivers/net/caif/caif_serial.c +++ b/drivers/net/caif/caif_serial.c @@ -167,8 +167,8 @@ static inline void debugfs_tx(struct ser_device *ser, const u8 *data, int size) #endif -static unsigned int ldisc_receive(struct tty_struct *tty, - const u8 *data, char *flags, int count) +static void ldisc_receive(struct tty_struct *tty, const u8 *data, + char *flags, int count) { struct sk_buff *skb = NULL; struct ser_device *ser; @@ -215,8 +215,6 @@ static unsigned int ldisc_receive(struct tty_struct *tty, } else ++ser->dev->stats.rx_dropped; update_tty_status(ser); - - return count; } static int handle_tx(struct ser_device *ser) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index 75622d54581f..1b49df6b2470 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -425,17 +425,16 @@ static void slc_setup(struct net_device *dev) * in parallel */ -static unsigned int slcan_receive_buf(struct tty_struct *tty, +static void slcan_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct slcan *sl = (struct slcan *) tty->disc_data; - int bytes = count; if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) - return -ENODEV; + return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -444,8 +443,6 @@ static unsigned int slcan_receive_buf(struct tty_struct *tty, } slcan_unesc(sl, *cp++); } - - return count; } /************************************ diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 992089639ea4..3e5d0b6b6516 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -456,7 +456,7 @@ out: * a block of 6pack data has been received, which can now be decapsulated * and sent on to some IP layer for further processing. */ -static unsigned int sixpack_receive_buf(struct tty_struct *tty, +static void sixpack_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct sixpack *sp; @@ -464,11 +464,11 @@ static unsigned int sixpack_receive_buf(struct tty_struct *tty, int count1; if (!count) - return 0; + return; sp = sp_get(tty); if (!sp) - return -ENODEV; + return; memcpy(buf, cp, count < sizeof(buf) ? count : sizeof(buf)); @@ -487,8 +487,6 @@ static unsigned int sixpack_receive_buf(struct tty_struct *tty, sp_put(sp); tty_unthrottle(tty); - - return count1; } /* diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 0e4f23531140..4c628393c8b1 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -923,14 +923,13 @@ static long mkiss_compat_ioctl(struct tty_struct *tty, struct file *file, * a block of data has been received, which can now be decapsulated * and sent on to the AX.25 layer for further processing. */ -static unsigned int mkiss_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct mkiss *ax = mkiss_get(tty); - int bytes = count; if (!ax) - return -ENODEV; + return; /* * Argh! mtu change time! - costs us the packet part received @@ -940,7 +939,7 @@ static unsigned int mkiss_receive_buf(struct tty_struct *tty, ax_changedmtu(ax); /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp != NULL && *fp++) { if (!test_and_set_bit(AXF_ERROR, &ax->flags)) ax->dev->stats.rx_errors++; @@ -953,8 +952,6 @@ static unsigned int mkiss_receive_buf(struct tty_struct *tty, mkiss_put(ax); tty_unthrottle(tty); - - return count; } /* diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 035861d8acb1..3352b2443e58 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -216,23 +216,23 @@ static int irtty_do_write(struct sir_dev *dev, const unsigned char *ptr, size_t * usbserial: urb-complete-interrupt / softint */ -static unsigned int irtty_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct sir_dev *dev; struct sirtty_cb *priv = tty->disc_data; int i; - IRDA_ASSERT(priv != NULL, return -ENODEV;); - IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EINVAL;); + IRDA_ASSERT(priv != NULL, return;); + IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return;); if (unlikely(count==0)) /* yes, this happens */ - return 0; + return; dev = priv->dev; if (!dev) { IRDA_WARNING("%s(), not ready yet!\n", __func__); - return -ENODEV; + return; } for (i = 0; i < count; i++) { @@ -242,13 +242,11 @@ static unsigned int irtty_receive_buf(struct tty_struct *tty, if (fp && *fp++) { IRDA_DEBUG(0, "Framing or parity error!\n"); sirdev_receive(dev, NULL, 0); /* notify sir_dev (updating stats) */ - return -EINVAL; + return; } } sirdev_receive(dev, cp, count); - - return count; } /* diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 53872d7d7382..a1b82c9c67d2 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -340,7 +340,7 @@ ppp_asynctty_poll(struct tty_struct *tty, struct file *file, poll_table *wait) } /* May sleep, don't call from interrupt level or with interrupts disabled */ -static unsigned int +static void ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -348,7 +348,7 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, unsigned long flags; if (!ap) - return -ENODEV; + return; spin_lock_irqsave(&ap->recv_lock, flags); ppp_async_input(ap, buf, cflags, count); spin_unlock_irqrestore(&ap->recv_lock, flags); @@ -356,8 +356,6 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf, tasklet_schedule(&ap->tsk); ap_put(ap); tty_unthrottle(tty); - - return count; } static void diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 0815790a5cf9..2573f525f11c 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -381,7 +381,7 @@ ppp_sync_poll(struct tty_struct *tty, struct file *file, poll_table *wait) } /* May sleep, don't call from interrupt level or with interrupts disabled */ -static unsigned int +static void ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, char *cflags, int count) { @@ -389,7 +389,7 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, unsigned long flags; if (!ap) - return -ENODEV; + return; spin_lock_irqsave(&ap->recv_lock, flags); ppp_sync_input(ap, buf, cflags, count); spin_unlock_irqrestore(&ap->recv_lock, flags); @@ -397,8 +397,6 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf, tasklet_schedule(&ap->tsk); sp_put(ap); tty_unthrottle(tty); - - return count; } static void diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 584809c656d5..8ec1a9a0bb9a 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -670,17 +670,16 @@ static void sl_setup(struct net_device *dev) * in parallel */ -static unsigned int slip_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void slip_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct slip *sl = tty->disc_data; - int bytes = count; if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) - return -ENODEV; + return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -694,8 +693,6 @@ static unsigned int slip_receive_buf(struct tty_struct *tty, #endif slip_unesc(sl, *cp++); } - - return count; } /************************************ diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 40398bf7d036..24297b274cd4 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -517,18 +517,17 @@ static int x25_asy_close(struct net_device *dev) * and sent on to some IP layer for further processing. */ -static unsigned int x25_asy_receive_buf(struct tty_struct *tty, +static void x25_asy_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct x25_asy *sl = tty->disc_data; - int bytes = count; if (!sl || sl->magic != X25_ASY_MAGIC || !netif_running(sl->dev)) return; /* Read the characters out of the buffer */ - while (bytes--) { + while (count--) { if (fp && *fp++) { if (!test_and_set_bit(SLF_ERROR, &sl->flags)) sl->dev->stats.rx_errors++; @@ -537,8 +536,6 @@ static unsigned int x25_asy_receive_buf(struct tty_struct *tty, } x25_asy_unesc(sl, *cp++); } - - return count; } /* diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index a4c42a75a3bf..09e8c7d53af3 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -2128,8 +2128,8 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm) gsm->tty = NULL; } -static unsigned int gsmld_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct gsm_mux *gsm = tty->disc_data; const unsigned char *dp; @@ -2162,8 +2162,6 @@ static unsigned int gsmld_receive_buf(struct tty_struct *tty, } /* FASYNC if needed ? */ /* If clogged call tty_throttle(tty); */ - - return count; } /** diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index cac666314aef..cea56033b34c 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -188,8 +188,8 @@ static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp, poll_table *wait); static int n_hdlc_tty_open(struct tty_struct *tty); static void n_hdlc_tty_close(struct tty_struct *tty); -static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, - const __u8 *cp, char *fp, int count); +static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp, + char *fp, int count); static void n_hdlc_tty_wakeup(struct tty_struct *tty); #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f))) @@ -509,8 +509,8 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty) * Called by tty low level driver when receive data is available. Data is * interpreted as one HDLC frame. */ -static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, - const __u8 *data, char *flags, int count) +static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data, + char *flags, int count) { register struct n_hdlc *n_hdlc = tty2n_hdlc (tty); register struct n_hdlc_buf *buf; @@ -521,20 +521,20 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, /* This can happen if stuff comes in on the backup tty */ if (!n_hdlc || tty != n_hdlc->tty) - return -ENODEV; + return; /* verify line is using HDLC discipline */ if (n_hdlc->magic != HDLC_MAGIC) { printk("%s(%d) line not using HDLC discipline\n", __FILE__,__LINE__); - return -EINVAL; + return; } if ( count>maxframe ) { if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) rx count>maxframesize, data discarded\n", __FILE__,__LINE__); - return -EINVAL; + return; } /* get a free HDLC buffer */ @@ -550,7 +550,7 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, if (debuglevel >= DEBUG_LEVEL_INFO) printk("%s(%d) no more rx buffers, data discarded\n", __FILE__,__LINE__); - return -EINVAL; + return; } /* copy received data to HDLC buffer */ @@ -565,8 +565,6 @@ static unsigned int n_hdlc_tty_receive(struct tty_struct *tty, if (n_hdlc->tty->fasync != NULL) kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN); - return count; - } /* end of n_hdlc_tty_receive() */ /** diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index a4bc39c21a43..5c6c31459a2f 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -139,8 +139,8 @@ static int r3964_ioctl(struct tty_struct *tty, struct file *file, static void r3964_set_termios(struct tty_struct *tty, struct ktermios *old); static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, struct poll_table_struct *wait); -static unsigned int r3964_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count); +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count); static struct tty_ldisc_ops tty_ldisc_N_R3964 = { .owner = THIS_MODULE, @@ -1239,8 +1239,8 @@ static unsigned int r3964_poll(struct tty_struct *tty, struct file *file, return result; } -static unsigned int r3964_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void r3964_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { struct r3964_info *pInfo = tty->disc_data; const unsigned char *p; @@ -1257,8 +1257,6 @@ static unsigned int r3964_receive_buf(struct tty_struct *tty, } } - - return count; } MODULE_LICENSE("GPL"); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 95d0a9c2dd13..0ad32888091c 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -81,6 +81,38 @@ static inline int tty_put_user(struct tty_struct *tty, unsigned char x, return put_user(x, ptr); } +/** + * n_tty_set__room - receive space + * @tty: terminal + * + * Called by the driver to find out how much data it is + * permitted to feed to the line discipline without any being lost + * and thus to manage flow control. Not serialized. Answers for the + * "instant". + */ + +static void n_tty_set_room(struct tty_struct *tty) +{ + /* tty->read_cnt is not read locked ? */ + int left = N_TTY_BUF_SIZE - tty->read_cnt - 1; + int old_left; + + /* + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + */ + if (left <= 0) + left = tty->icanon && !tty->canon_data; + old_left = tty->receive_room; + tty->receive_room = left; + + /* Did this open up the receive buffer? We may need to flip */ + if (left && !old_left) + schedule_work(&tty->buf.work); +} + static void put_tty_queue_nolock(unsigned char c, struct tty_struct *tty) { if (tty->read_cnt < N_TTY_BUF_SIZE) { @@ -152,6 +184,7 @@ static void reset_buffer_flags(struct tty_struct *tty) tty->canon_head = tty->canon_data = tty->erasing = 0; memset(&tty->read_flags, 0, sizeof tty->read_flags); + n_tty_set_room(tty); check_unthrottle(tty); } @@ -1327,19 +1360,17 @@ static void n_tty_write_wakeup(struct tty_struct *tty) * calls one at a time and in order (or using flush_to_ldisc) */ -static unsigned int n_tty_receive_buf(struct tty_struct *tty, - const unsigned char *cp, char *fp, int count) +static void n_tty_receive_buf(struct tty_struct *tty, const unsigned char *cp, + char *fp, int count) { const unsigned char *p; char *f, flags = TTY_NORMAL; int i; char buf[64]; unsigned long cpuflags; - int left; - int ret = 0; if (!tty->read_buf) - return 0; + return; if (tty->real_raw) { spin_lock_irqsave(&tty->read_lock, cpuflags); @@ -1349,7 +1380,6 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, memcpy(tty->read_buf + tty->read_head, cp, i); tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); tty->read_cnt += i; - ret += i; cp += i; count -= i; @@ -1359,10 +1389,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, memcpy(tty->read_buf + tty->read_head, cp, i); tty->read_head = (tty->read_head + i) & (N_TTY_BUF_SIZE-1); tty->read_cnt += i; - ret += i; spin_unlock_irqrestore(&tty->read_lock, cpuflags); } else { - ret = count; for (i = count, p = cp, f = fp; i; i--, p++) { if (f) flags = *f++; @@ -1390,6 +1418,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, tty->ops->flush_chars(tty); } + n_tty_set_room(tty); + if ((!tty->icanon && (tty->read_cnt >= tty->minimum_to_wake)) || L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); @@ -1402,12 +1432,8 @@ static unsigned int n_tty_receive_buf(struct tty_struct *tty, * mode. We don't want to throttle the driver if we're in * canonical mode and don't have a newline yet! */ - left = N_TTY_BUF_SIZE - tty->read_cnt - 1; - - if (left < TTY_THRESHOLD_THROTTLE) + if (tty->receive_room < TTY_THRESHOLD_THROTTLE) tty_throttle(tty); - - return ret; } int is_ignored(int sig) @@ -1451,6 +1477,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) if (test_bit(TTY_HW_COOK_IN, &tty->flags)) { tty->raw = 1; tty->real_raw = 1; + n_tty_set_room(tty); return; } if (I_ISTRIP(tty) || I_IUCLC(tty) || I_IGNCR(tty) || @@ -1503,6 +1530,7 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) else tty->real_raw = 0; } + n_tty_set_room(tty); /* The termios change make the tty ready for I/O */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); @@ -1784,6 +1812,8 @@ do_it_again: retval = -ERESTARTSYS; break; } + /* FIXME: does n_tty_set_room need locking ? */ + n_tty_set_room(tty); timeout = schedule_timeout(timeout); continue; } @@ -1855,8 +1885,10 @@ do_it_again: * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode, * we won't get any more characters. */ - if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) + if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) { + n_tty_set_room(tty); check_unthrottle(tty); + } if (b - buf >= minimum) break; @@ -1878,6 +1910,7 @@ do_it_again: } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) goto do_it_again; + n_tty_set_room(tty); return retval; } diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 46de2e075dac..f1a7918d71aa 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -416,7 +416,6 @@ static void flush_to_ldisc(struct work_struct *work) struct tty_buffer *head, *tail = tty->buf.tail; int seen_tail = 0; while ((head = tty->buf.head) != NULL) { - int copied; int count; char *char_buf; unsigned char *flag_buf; @@ -443,19 +442,17 @@ static void flush_to_ldisc(struct work_struct *work) line discipline as we want to empty the queue */ if (test_bit(TTY_FLUSHPENDING, &tty->flags)) break; + if (!tty->receive_room || seen_tail) + break; + if (count > tty->receive_room) + count = tty->receive_room; char_buf = head->char_buf_ptr + head->read; flag_buf = head->flag_buf_ptr + head->read; + head->read += count; spin_unlock_irqrestore(&tty->buf.lock, flags); - copied = disc->ops->receive_buf(tty, char_buf, + disc->ops->receive_buf(tty, char_buf, flag_buf, count); spin_lock_irqsave(&tty->buf.lock, flags); - - head->read += copied; - - if (copied == 0 || seen_tail) { - schedule_work(&tty->buf.work); - break; - } } clear_bit(TTY_FLUSHING, &tty->flags); } diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c index 67b1d0d7c8ac..fb864e7fcd13 100644 --- a/drivers/tty/vt/selection.c +++ b/drivers/tty/vt/selection.c @@ -332,7 +332,8 @@ int paste_selection(struct tty_struct *tty) continue; } count = sel_buffer_lth - pasted; - count = tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, + count = min(count, tty->receive_room); + tty->ldisc->ops->receive_buf(tty, sel_buffer + pasted, NULL, count); pasted += count; } diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index 5b07792ccb46..ff7dc08696a8 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -76,7 +76,7 @@ * tty device. It is solely the responsibility of the line * discipline to handle poll requests. * - * unsigned int (*receive_buf)(struct tty_struct *, const unsigned char *cp, + * void (*receive_buf)(struct tty_struct *, const unsigned char *cp, * char *fp, int count); * * This function is called by the low-level tty driver to send @@ -84,8 +84,7 @@ * processing. is a pointer to the buffer of input * character received by the device. is a pointer to a * pointer of flag bytes which indicate whether a character was - * received with a parity error, etc. Returns the amount of bytes - * received. + * received with a parity error, etc. * * void (*write_wakeup)(struct tty_struct *); * @@ -141,8 +140,8 @@ struct tty_ldisc_ops { /* * The following routines are called from below. */ - unsigned int (*receive_buf)(struct tty_struct *, - const unsigned char *cp, char *fp, int count); + void (*receive_buf)(struct tty_struct *, const unsigned char *cp, + char *fp, int count); void (*write_wakeup)(struct tty_struct *); void (*dcd_change)(struct tty_struct *, unsigned int, struct pps_event_time *); -- cgit v1.2.3 From 54ff502c283b6cf77c95c05c99dbca40d910b17d Mon Sep 17 00:00:00 2001 From: Anirban Chakraborty Date: Thu, 2 Jun 2011 12:42:21 +0000 Subject: qlcnic: Fix bug in FW queue dump Due to a change in FW template, a bug was introduced in dump queue entries. This is fixed by reinitializing queue address before looping for each que dump operation. Signed-off-by: Anirban Chakraborty Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_hw.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c index e9656616f2a2..a5d9fbf9d816 100644 --- a/drivers/net/qlcnic/qlcnic_hw.c +++ b/drivers/net/qlcnic/qlcnic_hw.c @@ -1406,6 +1406,7 @@ qlcnic_dump_que(struct qlcnic_adapter *adapter, struct qlcnic_dump_entry *entry, for (loop = 0; loop < que->no_ops; loop++) { QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id); + addr = que->read_addr; for (i = 0; i < cnt; i++) { QLCNIC_RD_DUMP_REG(addr, base, &data); *buffer++ = cpu_to_le32(data); -- cgit v1.2.3 From 5b446c6a7179513edcb34706088c4ce901b9a039 Mon Sep 17 00:00:00 2001 From: Sucheta Chakraborty Date: Fri, 3 Jun 2011 05:52:18 +0000 Subject: qlcnic: Avoid double free of skb in tx path buffer->skb should be marked NULL to avoid double free of the skb. Signed-off-by: Sucheta Chakraborty Signed-off-by: Anirban Chakraborty Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c index 3ab7d2c7baf2..0f6af5c61a7c 100644 --- a/drivers/net/qlcnic/qlcnic_main.c +++ b/drivers/net/qlcnic/qlcnic_main.c @@ -2159,6 +2159,7 @@ qlcnic_unmap_buffers(struct pci_dev *pdev, struct sk_buff *skb, nf = &pbuf->frag_array[0]; pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE); + pbuf->skb = NULL; } static inline void -- cgit v1.2.3 From 374eeb5a9d77ea719c5c46f4d70226623f4528ce Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 3 Jun 2011 10:35:52 +0000 Subject: bonding: reset queue mapping prior to transmission to physical device (v5) The bonding driver is multiqueue enabled, in which each queue represents a slave to enable optional steering of output frames to given slaves against the default output policy. However, it needs to reset the skb->queue_mapping prior to queuing to the physical device or the physical slave (if it is multiqueue) could wind up transmitting on an unintended tx queue Change Notes: v2) Based on first pass review, updated the patch to restore the origional queue mapping that was found in bond_select_queue, rather than simply resetting to zero. This preserves the value of queue_mapping when it was set on receive in the forwarding case which is desireable. v3) Fixed spelling an casting error in skb->cb v4) fixed to store raw queue_mapping to avoid double decrement v5) Eric D requested that ->cb access be wrapped in a macro. Signed-off-by: Neil Horman CC: Jay Vosburgh CC: Andy Gospodarek CC: "David S. Miller" Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 17b4dd94da90..652b30e525d0 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -388,6 +388,8 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr) return next; } +#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb)) + /** * bond_dev_queue_xmit - Prepare skb for xmit. * @@ -400,6 +402,9 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, { skb->dev = slave_dev; skb->priority = 1; + + skb->queue_mapping = bond_queue_mapping(skb); + if (unlikely(netpoll_tx_running(slave_dev))) bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); else @@ -4206,6 +4211,7 @@ static inline int bond_slave_override(struct bonding *bond, return res; } + static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) { /* @@ -4216,6 +4222,11 @@ static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) */ u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; + /* + * Save the original txq to restore before passing to the driver + */ + bond_queue_mapping(skb) = skb->queue_mapping; + if (unlikely(txq >= dev->real_num_tx_queues)) { do { txq -= dev->real_num_tx_queues; -- cgit v1.2.3 From 5fb9fb132c5a83010cd8d4bf6d0ee34fb3b9d488 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 3 Jun 2011 21:31:27 +0000 Subject: net: fix smc91x.c device tree support Fix missing semicolon at end of smc91x.c match tabledevice driver. Also remove unnecessary #ifdef around of_match_table pointer. Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index dc4805f473e3..f6285748bd3c 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2400,8 +2400,10 @@ static const struct of_device_id smc91x_match[] = { { .compatible = "smsc,lan91c94", }, { .compatible = "smsc,lan91c111", }, {}, -} +}; MODULE_DEVICE_TABLE(of, smc91x_match); +#else +#define smc91x_match NULL #endif static struct dev_pm_ops smc_drv_pm_ops = { @@ -2416,9 +2418,7 @@ static struct platform_driver smc_driver = { .name = CARDNAME, .owner = THIS_MODULE, .pm = &smc_drv_pm_ops, -#ifdef CONFIG_OF .of_match_table = smc91x_match, -#endif }, }; -- cgit v1.2.3 From 42b70a5f6d18165a075d189d1bee82fad7cdbf29 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 26 May 2011 17:14:22 +0200 Subject: iwlagn: use cts-to-self protection on 5000 adapters series This patch fixes 802.11n stability and performance regression we have since 2.6.35. It boost performance on my 5GHz N-only network from about 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz. These are test results of 5x downloading of approximately 700MB iso image: vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110 patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946 This was achieved with NetworkManager configured to do not perform periodical scans, by configuring constant BSSID. With periodical scans, after some time, performance downgrade to unpatched driver level, like in example below: patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683 However patch still make better here, since similar test on unpatched driver make link disconnects with below messages after some time: wlan1: authenticate with 00:23:69:35:d1:3f (try 1) wlan1: authenticate with 00:23:69:35:d1:3f (try 2) wlan1: authenticate with 00:23:69:35:d1:3f (try 3) wlan1: authentication with 00:23:69:35:d1:3f timed out On 2.6.35 kernel patch helps against connection hangs with messages: iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload. iwlagn 0000:20:00.0: On demand firmware reload iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka Acked-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 1 - drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c | 12 ++---------- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 8 ++++++++ 3 files changed, 10 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 5b721c56aee9..f99f9c193352 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -423,7 +423,6 @@ static struct iwl_base_params iwl5000_base_params = { }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, - .use_rts_for_aggregation = true, /* use rts/cts protection */ }; #define IWL_DEVICE_5000 \ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c index b12c72d63ccb..23fa93deae96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c @@ -163,17 +163,9 @@ static void iwlagn_tx_cmd_protection(struct iwl_priv *priv, __le16 fc, __le32 *tx_flags) { if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS || - info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) { + info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT || + info->flags & IEEE80211_TX_CTL_AMPDU) *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } - - if (priv->cfg->ht_params && - priv->cfg->ht_params->use_rts_for_aggregation && - info->flags & IEEE80211_TX_CTL_AMPDU) { - *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK; - return; - } } /* Calc max signal level (dBm) among 3 possible receivers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 2532c7db3aff..018874964602 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -325,6 +325,14 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) return 0; } + /* + * force CTS-to-self frames protection if RTS-CTS is not preferred + * one aggregation protection method + */ + if (!(priv->cfg->ht_params && + priv->cfg->ht_params->use_rts_for_aggregation)) + ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; + if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; -- cgit v1.2.3 From 3bb42a64960253353278876ca8da6b0a7d3bea87 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 4 Jun 2011 16:48:54 +0200 Subject: rt2x00: fix rmmod crash Avoid queue and run autowakeup_work when device is not present anymore. That prevent rmmod and device remove crash introduced by: commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde Author: Ivo van Doorn Date: Sat Apr 30 17:18:18 2011 +0200 rt2x00: Add autowake support for USB hardware Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 3 ++- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 555180d8f4aa..b704e5b183d0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -250,7 +250,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL) rt2x00link_reset_tuner(rt2x00dev, false); - if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) && (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) && (conf->flags & IEEE80211_CONF_PS)) { beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c018d67aab8e..939821b4af2f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -146,6 +146,9 @@ static void rt2x00lib_autowakeup(struct work_struct *work) struct rt2x00_dev *rt2x00dev = container_of(work, struct rt2x00_dev, autowakeup_work.work); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) ERROR(rt2x00dev, "Device failed to wakeup.\n"); clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); @@ -1160,6 +1163,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) * Stop all work. */ cancel_work_sync(&rt2x00dev->intf_work); + cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); if (rt2x00_is_usb(rt2x00dev)) { del_timer_sync(&rt2x00dev->txstatus_timer); cancel_work_sync(&rt2x00dev->rxdone_work); -- cgit v1.2.3 From 51892dbbd511911c0f965a36b431fc3e8f1e4f8a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 6 Jun 2011 15:11:30 +0200 Subject: iwl4965: set tx power after rxon_assoc Setting tx power can be deferred during scan or changing channel. If after that correct tx power settings will not be sent to device, we can observe transmission problems and timeouts. Force to send tx power settings also after partial rxon change, to assure device always be configured with up-to-date settings. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=36492 Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index f9db25bb35c3..e1b89220c186 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1237,7 +1237,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); iwl_legacy_print_rx_config_cmd(priv, ctx); - return 0; + goto set_tx_power; } /* If we are currently associated and the new config requires @@ -1317,6 +1317,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c iwl4965_init_sensitivity(priv); +set_tx_power: /* If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames */ ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); -- cgit v1.2.3 From 4fea2e0e59dab863a63fa1638b86d850896cd861 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Tue, 31 May 2011 08:50:24 +0900 Subject: rtlwifi: Fix logic in rx_interrupt Should pass along packet if there's no CRC and no hardware error. Signed-off-by: Mike McCormack Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 89100e7c553b..3e055c6bad36 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -700,7 +700,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) rtlpci->rxbuffersize, PCI_DMA_FROMDEVICE); - if (!stats.crc || !stats.hwerror) { + if (!stats.crc && !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); -- cgit v1.2.3 From 6633d649788e72400b02098bd389585e2c56a557 Mon Sep 17 00:00:00 2001 From: Mike McCormack Date: Tue, 7 Jun 2011 08:58:31 +0900 Subject: rtlwifi: Avoid modifying skbs that are resubmitted In the case we fail to allocate a new skb, the old skb should be resubmitted unmodified. Fixes bug introduced in a9e12869758430424804. Signed-off-by: Mike McCormack Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 3e055c6bad36..9f8ccae93317 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -669,6 +669,19 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) &rx_status, (u8 *) pdesc, skb); + new_skb = dev_alloc_skb(rtlpci->rxbuffersize); + if (unlikely(!new_skb)) { + RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), + DBG_DMESG, + ("can't alloc skb for rx\n")); + goto done; + } + + pci_unmap_single(rtlpci->pdev, + *((dma_addr_t *) skb->cb), + rtlpci->rxbuffersize, + PCI_DMA_FROMDEVICE); + skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc, false, HW_DESC_RXPKT_LEN)); @@ -685,21 +698,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) hdr = rtl_get_hdr(skb); fc = rtl_get_fc(skb); - /* try for new buffer - if allocation fails, drop - * frame and reuse old buffer - */ - new_skb = dev_alloc_skb(rtlpci->rxbuffersize); - if (unlikely(!new_skb)) { - RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, - ("can't alloc skb for rx\n")); - goto done; - } - pci_unmap_single(rtlpci->pdev, - *((dma_addr_t *) skb->cb), - rtlpci->rxbuffersize, - PCI_DMA_FROMDEVICE); - if (!stats.crc && !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); -- cgit v1.2.3 From 665c8c8ee405738375b679246b49342ce38ba056 Mon Sep 17 00:00:00 2001 From: "Williams, Mitch A" Date: Tue, 7 Jun 2011 14:22:57 -0700 Subject: igb: fix i350 SR-IOV failture When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to the driver attempting to enable RSS on the PF device, which is not supported by the i350. When max_vfs is specified on an i350 adapter, set the number of RSS queues to 1. This issue affects 2.6.39 as well. CC: stable@kernel.org Signed-off-by: Mitch Williams Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 18fccf913635..2c28621eb30b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2373,6 +2373,9 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) } #endif /* CONFIG_PCI_IOV */ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus()); + /* i350 cannot do RSS and SR-IOV at the same time */ + if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count) + adapter->rss_queues = 1; /* * if rss_queues > 4 or vfs are going to be allocated with rss_queues -- cgit v1.2.3 From 43e4e0b94984b45d52048e3ac027cac15c718b65 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 27 May 2011 08:40:24 -0700 Subject: iwlagn: send tx power command if defer cause by RXON not match During channge channel, tx power will not send to uCode, the tx power command should send after scan complete. but should also can send after RXON command. Stable fix identified by Stanislaw Gruszka . Signed-off-by: Wey-Yi Guy Cc: stable@kernel.org [2.6.38+] Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c index 018874964602..09f679d6046f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c @@ -370,6 +370,11 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } memcpy(active, &ctx->staging, sizeof(*active)); + /* + * We do not commit tx power settings while channel changing, + * do it now if after settings changed. + */ + iwl_set_tx_power(priv, priv->tx_power_next, false); return 0; } -- cgit v1.2.3 From 51e65257142a87fe46a1ce5c35c86c5baf012614 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 8 Jun 2011 15:26:31 +0200 Subject: iwlegacy: fix channel switch locking We use priv->mutex to avoid race conditions between chswitch_done() and mac_channel_switch(), when marking channel switch in progress. But chswitch_done() can be called in atomic context from rx_csa() or with mutex already taken from commit_rxon(). To fix remove mutex from chswitch_done() and use atomic bitops for marking channel switch pending. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965.c | 9 +++------ drivers/net/wireless/iwlegacy/iwl-core.c | 30 ++++++++++++---------------- drivers/net/wireless/iwlegacy/iwl-core.h | 2 +- drivers/net/wireless/iwlegacy/iwl-dev.h | 13 +----------- drivers/net/wireless/iwlegacy/iwl4965-base.c | 20 +++++++++---------- 5 files changed, 28 insertions(+), 46 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index e1b89220c186..facc94e74b07 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1218,10 +1218,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c * receive commit_rxon request * abort any previous channel switch if still in process */ - if (priv->switch_rxon.switch_in_progress && - (priv->switch_rxon.channel != ctx->staging.channel)) { + if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && + (priv->switch_channel != ctx->staging.channel)) { IWL_DEBUG_11H(priv, "abort channel switch on %d\n", - le16_to_cpu(priv->switch_rxon.channel)); + le16_to_cpu(priv->switch_channel)); iwl_legacy_chswitch_done(priv, false); } @@ -1404,9 +1404,6 @@ static int iwl4965_hw_channel_switch(struct iwl_priv *priv, return rc; } - priv->switch_rxon.channel = cmd.channel; - priv->switch_rxon.switch_in_progress = true; - return iwl_legacy_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd); } diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c index 42df8321dae8..3be76bd5499a 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.c +++ b/drivers/net/wireless/iwlegacy/iwl-core.c @@ -859,12 +859,8 @@ void iwl_legacy_chswitch_done(struct iwl_priv *priv, bool is_success) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - if (priv->switch_rxon.switch_in_progress) { + if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) ieee80211_chswitch_done(ctx->vif, is_success); - mutex_lock(&priv->mutex); - priv->switch_rxon.switch_in_progress = false; - mutex_unlock(&priv->mutex); - } } EXPORT_SYMBOL(iwl_legacy_chswitch_done); @@ -876,19 +872,19 @@ void iwl_legacy_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active; - if (priv->switch_rxon.switch_in_progress) { - if (!le32_to_cpu(csa->status) && - (csa->channel == priv->switch_rxon.channel)) { - rxon->channel = csa->channel; - ctx->staging.channel = csa->channel; - IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", - le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, true); - } else { - IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) + return; + + if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) { + rxon->channel = csa->channel; + ctx->staging.channel = csa->channel; + IWL_DEBUG_11H(priv, "CSA notif: channel %d\n", le16_to_cpu(csa->channel)); - iwl_legacy_chswitch_done(priv, false); - } + iwl_legacy_chswitch_done(priv, true); + } else { + IWL_ERR(priv, "CSA notif (fail) : channel %d\n", + le16_to_cpu(csa->channel)); + iwl_legacy_chswitch_done(priv, false); } } EXPORT_SYMBOL(iwl_legacy_rx_csa); diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h index bc66c604106c..c5fbda0760de 100644 --- a/drivers/net/wireless/iwlegacy/iwl-core.h +++ b/drivers/net/wireless/iwlegacy/iwl-core.h @@ -560,7 +560,7 @@ void iwl_legacy_free_geos(struct iwl_priv *priv); #define STATUS_SCAN_HW 15 #define STATUS_POWER_PMI 16 #define STATUS_FW_ERROR 17 - +#define STATUS_CHANNEL_SWITCH_PENDING 18 static inline int iwl_legacy_is_ready(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h index be0106c6a2da..ea30122669ee 100644 --- a/drivers/net/wireless/iwlegacy/iwl-dev.h +++ b/drivers/net/wireless/iwlegacy/iwl-dev.h @@ -854,17 +854,6 @@ struct traffic_stats { #endif }; -/* - * iwl_switch_rxon: "channel switch" structure - * - * @ switch_in_progress: channel switch in progress - * @ channel: new channel - */ -struct iwl_switch_rxon { - bool switch_in_progress; - __le16 channel; -}; - /* * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds * to perform continuous uCode event logging operation if enabled @@ -1115,7 +1104,7 @@ struct iwl_priv { struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX]; - struct iwl_switch_rxon switch_rxon; + __le16 switch_channel; /* 1st responses from initialize and runtime uCode images. * _4965's initialize alive response contains some calibration data. */ diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c index af2ae22fcfd3..7157ba529680 100644 --- a/drivers/net/wireless/iwlegacy/iwl4965-base.c +++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c @@ -2861,16 +2861,13 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, goto out; if (test_bit(STATUS_EXIT_PENDING, &priv->status) || - test_bit(STATUS_SCANNING, &priv->status)) + test_bit(STATUS_SCANNING, &priv->status) || + test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status)) goto out; if (!iwl_legacy_is_associated_ctx(ctx)) goto out; - /* channel switch in progress */ - if (priv->switch_rxon.switch_in_progress == true) - goto out; - if (priv->cfg->ops->lib->set_channel_switch) { ch = channel->hw_value; @@ -2919,15 +2916,18 @@ void iwl4965_mac_channel_switch(struct ieee80211_hw *hw, * at this point, staging_rxon has the * configuration for channel switch */ - if (priv->cfg->ops->lib->set_channel_switch(priv, - ch_switch)) - priv->switch_rxon.switch_in_progress = false; + set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status); + priv->switch_channel = cpu_to_le16(ch); + if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) { + clear_bit(STATUS_CHANNEL_SWITCH_PENDING, + &priv->status); + priv->switch_channel = 0; + ieee80211_chswitch_done(ctx->vif, false); + } } } out: mutex_unlock(&priv->mutex); - if (!priv->switch_rxon.switch_in_progress) - ieee80211_chswitch_done(ctx->vif, false); IWL_DEBUG_MAC80211(priv, "leave\n"); } -- cgit v1.2.3 From 6c43e0465f56248d9da56f2c4665ce1696766814 Mon Sep 17 00:00:00 2001 From: Wu Jiajun-B06378 Date: Tue, 7 Jun 2011 21:46:51 +0000 Subject: gianfar:localized filer table Each eTSEC device should own localized filer table. Signed-off-by: Jiajun Wu Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 29 +++++++++----------- drivers/net/gianfar.h | 8 ++++-- drivers/net/gianfar_ethtool.c | 64 ++++++++++++++++++++++--------------------- 3 files changed, 51 insertions(+), 50 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index ff60b23a5b74..2dfcc8047847 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -10,7 +10,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet * - * Copyright 2002-2009 Freescale Semiconductor, Inc. + * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc. * Copyright 2007 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify it @@ -476,9 +476,6 @@ static const struct net_device_ops gfar_netdev_ops = { #endif }; -unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; -unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; - void lock_rx_qs(struct gfar_private *priv) { int i = 0x0; @@ -868,28 +865,28 @@ static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar, rqfar--; rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT; - ftp_rqfpr[rqfar] = rqfpr; - ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_NOMATCH; - ftp_rqfpr[rqfar] = rqfpr; - ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND; rqfpr = class; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar--; rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND; rqfpr = class; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); return rqfar; @@ -904,8 +901,8 @@ static void gfar_init_filer_table(struct gfar_private *priv) /* Default rule */ rqfcr = RQFCR_CMP_MATCH; - ftp_rqfcr[rqfar] = rqfcr; - ftp_rqfpr[rqfar] = rqfpr; + priv->ftp_rqfcr[rqfar] = rqfcr; + priv->ftp_rqfpr[rqfar] = rqfpr; gfar_write_filer(priv, rqfar, rqfcr, rqfpr); rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6); @@ -921,8 +918,8 @@ static void gfar_init_filer_table(struct gfar_private *priv) /* Rest are masked rules */ rqfcr = RQFCR_CMP_NOMATCH; for (i = 0; i < rqfar; i++) { - ftp_rqfcr[i] = rqfcr; - ftp_rqfpr[i] = rqfpr; + priv->ftp_rqfcr[i] = rqfcr; + priv->ftp_rqfpr[i] = rqfpr; gfar_write_filer(priv, i, rqfcr, rqfpr); } } diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index fc86f5195445..ba36dc7a3435 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -9,7 +9,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet * - * Copyright 2002-2009 Freescale Semiconductor, Inc. + * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -1107,10 +1107,12 @@ struct gfar_private { /* HW time stamping enabled flag */ int hwts_rx_en; int hwts_tx_en; + + /*Filer table*/ + unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; + unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; }; -extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1]; -extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1]; static inline int gfar_has_errata(struct gfar_private *priv, enum gfar_errata err) diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 493d743839d9..239e3330495f 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -9,7 +9,7 @@ * Maintainer: Kumar Gala * Modifier: Sandeep Gopalpet * - * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2003-2006, 2008-2009, 2011 Freescale Semiconductor, Inc. * * This software may be used and distributed according to * the terms of the GNU Public License, Version 2, incorporated herein @@ -609,15 +609,15 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L2DA) { fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -626,16 +626,16 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; priv->cur_filer_idx = priv->cur_filer_idx - 1; } if (ethflow & RXH_IP_SRC) { fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -643,8 +643,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & (RXH_IP_DST)) { fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -652,8 +652,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L3_PROTO) { fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -661,8 +661,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L4_B_0_1) { fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -670,8 +670,8 @@ static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) if (ethflow & RXH_L4_B_2_3) { fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; - ftp_rqfpr[priv->cur_filer_idx] = fpr; - ftp_rqfcr[priv->cur_filer_idx] = fcr; + priv->ftp_rqfpr[priv->cur_filer_idx] = fpr; + priv->ftp_rqfcr[priv->cur_filer_idx] = fcr; gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); priv->cur_filer_idx = priv->cur_filer_idx - 1; } @@ -705,12 +705,12 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u } for (i = 0; i < MAX_FILER_IDX + 1; i++) { - local_rqfpr[j] = ftp_rqfpr[i]; - local_rqfcr[j] = ftp_rqfcr[i]; + local_rqfpr[j] = priv->ftp_rqfpr[i]; + local_rqfcr[j] = priv->ftp_rqfcr[i]; j--; - if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE | + if ((priv->ftp_rqfcr[i] == (RQFCR_PID_PARSE | RQFCR_CLE |RQFCR_AND)) && - (ftp_rqfpr[i] == cmp_rqfpr)) + (priv->ftp_rqfpr[i] == cmp_rqfpr)) break; } @@ -724,20 +724,22 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u * if it was already programmed, we need to overwrite these rules */ for (l = i+1; l < MAX_FILER_IDX; l++) { - if ((ftp_rqfcr[l] & RQFCR_CLE) && - !(ftp_rqfcr[l] & RQFCR_AND)) { - ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT | + if ((priv->ftp_rqfcr[l] & RQFCR_CLE) && + !(priv->ftp_rqfcr[l] & RQFCR_AND)) { + priv->ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT | RQFCR_HASHTBL_0 | RQFCR_PID_MASK; - ftp_rqfpr[l] = FPR_FILER_MASK; - gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]); + priv->ftp_rqfpr[l] = FPR_FILER_MASK; + gfar_write_filer(priv, l, priv->ftp_rqfcr[l], + priv->ftp_rqfpr[l]); break; } - if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND)) + if (!(priv->ftp_rqfcr[l] & RQFCR_CLE) && + (priv->ftp_rqfcr[l] & RQFCR_AND)) continue; else { - local_rqfpr[j] = ftp_rqfpr[l]; - local_rqfcr[j] = ftp_rqfcr[l]; + local_rqfpr[j] = priv->ftp_rqfpr[l]; + local_rqfcr[j] = priv->ftp_rqfcr[l]; j--; } } @@ -750,8 +752,8 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u /* Write back the popped out rules again */ for (k = j+1; k < MAX_FILER_IDX; k++) { - ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k]; - ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k]; + priv->ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k]; + priv->ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k]; gfar_write_filer(priv, priv->cur_filer_idx, local_rqfcr[k], local_rqfpr[k]); if (!priv->cur_filer_idx) -- cgit v1.2.3 From d814dee0e1a5d9b2f858b91551a0dd0608f777a1 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Fri, 10 Jun 2011 00:51:54 +0000 Subject: NET: am79c961: ensure asm() statements are marked volatile Without this the compiler can (and does) optimize register reads away from within loops, and other such optimizations. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/arm/am79c961a.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 0c9217f48b72..084b67fbe7aa 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -50,7 +50,7 @@ static const char version[] = #ifdef __arm__ static void write_rreg(u_long base, u_int reg, u_int val) { - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "str%?h %0, [%2, #-4] @ NET_RDP" : @@ -60,7 +60,7 @@ static void write_rreg(u_long base, u_int reg, u_int val) static inline unsigned short read_rreg(u_long base_addr, u_int reg) { unsigned short v; - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "ldr%?h %0, [%2, #-4] @ NET_RDP" : "=r" (v) @@ -70,7 +70,7 @@ static inline unsigned short read_rreg(u_long base_addr, u_int reg) static inline void write_ireg(u_long base, u_int reg, u_int val) { - __asm__( + asm volatile( "str%?h %1, [%2] @ NET_RAP\n\t" "str%?h %0, [%2, #8] @ NET_IDP" : @@ -80,7 +80,7 @@ static inline void write_ireg(u_long base, u_int reg, u_int val) static inline unsigned short read_ireg(u_long base_addr, u_int reg) { u_short v; - __asm__( + asm volatile( "str%?h %1, [%2] @ NAT_RAP\n\t" "ldr%?h %0, [%2, #8] @ NET_IDP\n\t" : "=r" (v) @@ -131,7 +131,7 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned length = (length + 1) & ~1; if ((int)buf & 2) { unsigned int tmp; - __asm__ __volatile__( + asm volatile( "ldr%?h %2, [%0], #4\n\t" "str%?b %2, [%1], #1\n\t" "mov%? %2, %2, lsr #8\n\t" @@ -141,7 +141,7 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned } while (length > 8) { unsigned int tmp, tmp2, tmp3; - __asm__ __volatile__( + asm volatile( "ldr%?h %2, [%0], #4\n\t" "ldr%?h %3, [%0], #4\n\t" "orr%? %2, %2, %3, lsl #16\n\t" @@ -155,7 +155,7 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned } while (length > 0) { unsigned int tmp; - __asm__ __volatile__( + asm volatile( "ldr%?h %2, [%0], #4\n\t" "str%?b %2, [%1], #1\n\t" "mov%? %2, %2, lsr #8\n\t" -- cgit v1.2.3 From bfc6501324427a97814de1587f89d73bf8677057 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Fri, 10 Jun 2011 00:52:14 +0000 Subject: NET: am79c961: ensure multicast filter is correctly set at open We were clearing out the multicast filter whenever the interface was upped, and not setting the mode bits correctly. This can cause problems if there are any multicast addresses already set at this point, or if ALLMULTI was set. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/arm/am79c961a.c | 77 +++++++++++++++++++++++---------------------- 1 file changed, 40 insertions(+), 37 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 084b67fbe7aa..79d88a0b00a3 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -196,6 +196,42 @@ am79c961_ramtest(struct net_device *dev, unsigned int val) return errorcount; } +static void am79c961_mc_hash(char *addr, u16 *hash) +{ + if (addr[0] & 0x01) { + int idx, bit; + u32 crc; + + crc = ether_crc_le(ETH_ALEN, addr); + + idx = crc >> 30; + bit = (crc >> 26) & 15; + + hash[idx] |= 1 << bit; + } +} + +static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash) +{ + unsigned int mode = MODE_PORT_10BT; + + if (dev->flags & IFF_PROMISC) { + mode |= MODE_PROMISC; + memset(hash, 0xff, 4 * sizeof(*hash)); + } else if (dev->flags & IFF_ALLMULTI) { + memset(hash, 0xff, 4 * sizeof(*hash)); + } else { + struct netdev_hw_addr *ha; + + memset(hash, 0, 4 * sizeof(*hash)); + + netdev_for_each_mc_addr(ha, dev) + am79c961_mc_hash(ha->addr, hash); + } + + return mode; +} + static void am79c961_init_for_open(struct net_device *dev) { @@ -203,6 +239,7 @@ am79c961_init_for_open(struct net_device *dev) unsigned long flags; unsigned char *p; u_int hdr_addr, first_free_addr; + u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); int i; /* @@ -218,16 +255,12 @@ am79c961_init_for_open(struct net_device *dev) write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */ for (i = LADRL; i <= LADRH; i++) - write_rreg (dev->base_addr, i, 0); + write_rreg (dev->base_addr, i, multi_hash[i - LADRL]); for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2) write_rreg (dev->base_addr, i, p[0] | (p[1] << 8)); - i = MODE_PORT_10BT; - if (dev->flags & IFF_PROMISC) - i |= MODE_PROMISC; - - write_rreg (dev->base_addr, MODE, i); + write_rreg (dev->base_addr, MODE, mode); write_rreg (dev->base_addr, POLLINT, 0); write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS); write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS); @@ -340,21 +373,6 @@ am79c961_close(struct net_device *dev) return 0; } -static void am79c961_mc_hash(char *addr, unsigned short *hash) -{ - if (addr[0] & 0x01) { - int idx, bit; - u32 crc; - - crc = ether_crc_le(ETH_ALEN, addr); - - idx = crc >> 30; - bit = (crc >> 26) & 15; - - hash[idx] |= 1 << bit; - } -} - /* * Set or clear promiscuous/multicast mode filter for this adapter. */ @@ -362,24 +380,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) { struct dev_priv *priv = netdev_priv(dev); unsigned long flags; - unsigned short multi_hash[4], mode; + u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash); int i, stopped; - mode = MODE_PORT_10BT; - - if (dev->flags & IFF_PROMISC) { - mode |= MODE_PROMISC; - } else if (dev->flags & IFF_ALLMULTI) { - memset(multi_hash, 0xff, sizeof(multi_hash)); - } else { - struct netdev_hw_addr *ha; - - memset(multi_hash, 0x00, sizeof(multi_hash)); - - netdev_for_each_mc_addr(ha, dev) - am79c961_mc_hash(ha->addr, multi_hash); - } - spin_lock_irqsave(&priv->chip_lock, flags); stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; -- cgit v1.2.3 From f777737885a69d37132c956f1e8deab676693157 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Fri, 10 Jun 2011 00:52:35 +0000 Subject: NET: am79c961: fix assembler warnings Fix: /tmp/ccvoZ6h8.s: Assembler messages: /tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order /tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order /tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order by ensuring that we have temporary variables placed into specific registers. Reorder the code a bit to allow the resulting assembly to be slightly more optimal. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/arm/am79c961a.c | 35 ++++++++++++++++++----------------- 1 file changed, 18 insertions(+), 17 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 79d88a0b00a3..7b3e23f38913 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -91,40 +91,41 @@ static inline unsigned short read_ireg(u_long base_addr, u_int reg) #define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1)) #define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1)) -static inline void +static void am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) { offset = ISAMEM_BASE + (offset << 1); length = (length + 1) & ~1; if ((int)buf & 2) { - __asm__ __volatile__("str%?h %2, [%0], #4" + asm volatile("str%?h %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; } while (length > 8) { - unsigned int tmp, tmp2; - __asm__ __volatile__( - "ldm%?ia %1!, {%2, %3}\n\t" + register unsigned int tmp asm("r2"), tmp2 asm("r3"); + asm volatile( + "ldm%?ia %0!, {%1, %2}" + : "+r" (buf), "=&r" (tmp), "=&r" (tmp2)); + length -= 8; + asm volatile( + "str%?h %1, [%0], #4\n\t" + "mov%? %1, %1, lsr #16\n\t" + "str%?h %1, [%0], #4\n\t" "str%?h %2, [%0], #4\n\t" "mov%? %2, %2, lsr #16\n\t" - "str%?h %2, [%0], #4\n\t" - "str%?h %3, [%0], #4\n\t" - "mov%? %3, %3, lsr #16\n\t" - "str%?h %3, [%0], #4" - : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2) - : "0" (offset), "1" (buf)); - length -= 8; + "str%?h %2, [%0], #4" + : "+r" (offset), "=&r" (tmp), "=&r" (tmp2)); } while (length > 0) { - __asm__ __volatile__("str%?h %2, [%0], #4" + asm volatile("str%?h %2, [%0], #4" : "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8))); buf += 2; length -= 2; } } -static inline void +static void am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length) { offset = ISAMEM_BASE + (offset << 1); @@ -140,12 +141,12 @@ am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned length -= 2; } while (length > 8) { - unsigned int tmp, tmp2, tmp3; + register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3; asm volatile( "ldr%?h %2, [%0], #4\n\t" + "ldr%?h %4, [%0], #4\n\t" "ldr%?h %3, [%0], #4\n\t" - "orr%? %2, %2, %3, lsl #16\n\t" - "ldr%?h %3, [%0], #4\n\t" + "orr%? %2, %2, %4, lsl #16\n\t" "ldr%?h %4, [%0], #4\n\t" "orr%? %3, %3, %4, lsl #16\n\t" "stm%?ia %1!, {%2, %3}" -- cgit v1.2.3 From 06866bf5c5ad8989119a145fdb54a9fbcafa702d Mon Sep 17 00:00:00 2001 From: Daniel Hellstrom Date: Fri, 10 Jun 2011 04:55:16 +0000 Subject: dl2k: EEPROM CRC calculation wrong endianess on bigendian machine Signed-off-by: Daniel Hellstrom Signed-off-by: David S. Miller --- drivers/net/dl2k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index c445457b66d5..23179dbcedd2 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -346,7 +346,7 @@ parse_eeprom (struct net_device *dev) if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */ /* Check CRC */ crc = ~ether_crc_le (256 - 4, sromdata); - if (psrom->crc != crc) { + if (psrom->crc != cpu_to_le32(crc)) { printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name); return -1; -- cgit v1.2.3 From fc9b4910b00039da054f221e2821be0519261101 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 11 Jun 2011 08:39:55 +0000 Subject: net: ep93xx_eth: pass struct device to DMA API functions We shouldn't use NULL for any DMA API functions, unless we are dealing with ISA or EISA device. So pass correct struct dev pointer to these functions. Signed-off-by: Mika Westerberg Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 5a77001b6d10..f65dfb6e5705 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -284,7 +284,7 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget) skb = dev_alloc_skb(length + 2); if (likely(skb != NULL)) { skb_reserve(skb, 2); - dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr, + dma_sync_single_for_cpu(dev->dev.parent, ep->descs->rdesc[entry].buf_addr, length, DMA_FROM_DEVICE); skb_copy_to_linear_data(skb, ep->rx_buf[entry], length); skb_put(skb, length); @@ -362,7 +362,7 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) ep->descs->tdesc[entry].tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff); skb_copy_and_csum_dev(skb, ep->tx_buf[entry]); - dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr, + dma_sync_single_for_cpu(dev->dev.parent, ep->descs->tdesc[entry].buf_addr, skb->len, DMA_TO_DEVICE); dev_kfree_skb(skb); @@ -457,6 +457,7 @@ static irqreturn_t ep93xx_irq(int irq, void *dev_id) static void ep93xx_free_buffers(struct ep93xx_priv *ep) { + struct device *dev = ep->dev->dev.parent; int i; for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) { @@ -464,7 +465,7 @@ static void ep93xx_free_buffers(struct ep93xx_priv *ep) d = ep->descs->rdesc[i].buf_addr; if (d) - dma_unmap_single(NULL, d, PAGE_SIZE, DMA_FROM_DEVICE); + dma_unmap_single(dev, d, PAGE_SIZE, DMA_FROM_DEVICE); if (ep->rx_buf[i] != NULL) free_page((unsigned long)ep->rx_buf[i]); @@ -475,13 +476,13 @@ static void ep93xx_free_buffers(struct ep93xx_priv *ep) d = ep->descs->tdesc[i].buf_addr; if (d) - dma_unmap_single(NULL, d, PAGE_SIZE, DMA_TO_DEVICE); + dma_unmap_single(dev, d, PAGE_SIZE, DMA_TO_DEVICE); if (ep->tx_buf[i] != NULL) free_page((unsigned long)ep->tx_buf[i]); } - dma_free_coherent(NULL, sizeof(struct ep93xx_descs), ep->descs, + dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs, ep->descs_dma_addr); } @@ -491,9 +492,10 @@ static void ep93xx_free_buffers(struct ep93xx_priv *ep) */ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) { + struct device *dev = ep->dev->dev.parent; int i; - ep->descs = dma_alloc_coherent(NULL, sizeof(struct ep93xx_descs), + ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs), &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA); if (ep->descs == NULL) return 1; @@ -506,8 +508,8 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) if (page == NULL) goto err; - d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(NULL, d)) { + d = dma_map_single(dev, page, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, d)) { free_page((unsigned long)page); goto err; } @@ -529,8 +531,8 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) if (page == NULL) goto err; - d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE); - if (dma_mapping_error(NULL, d)) { + d = dma_map_single(dev, page, PAGE_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(dev, d)) { free_page((unsigned long)page); goto err; } @@ -829,6 +831,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev) } ep = netdev_priv(dev); ep->dev = dev; + SET_NETDEV_DEV(dev, &pdev->dev); netif_napi_add(dev, &ep->napi, ep93xx_poll, 64); platform_set_drvdata(pdev, dev); -- cgit v1.2.3 From 3247a1fcee49b571b40c4bd723439ce5c64f56ad Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 11 Jun 2011 08:39:56 +0000 Subject: net: ep93xx_eth: allocate buffers using kmalloc() We can use simply kmalloc() to allocate the buffers. This also simplifies the code and allows us to perform DMA sync operations more easily. Memory is allocated with only GFP_KERNEL since there are no DMA allocation restrictions on this platform. Signed-off-by: Mika Westerberg Acked-by: Russell King Acked-by: H Hartley Sweeten Tested-by: Petr Stetiar Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 51 +++++++++++++++++--------------------------- 1 file changed, 20 insertions(+), 31 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index f65dfb6e5705..97bf6b10ce61 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -460,36 +460,32 @@ static void ep93xx_free_buffers(struct ep93xx_priv *ep) struct device *dev = ep->dev->dev.parent; int i; - for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) { + for (i = 0; i < RX_QUEUE_ENTRIES; i++) { dma_addr_t d; d = ep->descs->rdesc[i].buf_addr; if (d) - dma_unmap_single(dev, d, PAGE_SIZE, DMA_FROM_DEVICE); + dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_FROM_DEVICE); if (ep->rx_buf[i] != NULL) - free_page((unsigned long)ep->rx_buf[i]); + kfree(ep->rx_buf[i]); } - for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) { + for (i = 0; i < TX_QUEUE_ENTRIES; i++) { dma_addr_t d; d = ep->descs->tdesc[i].buf_addr; if (d) - dma_unmap_single(dev, d, PAGE_SIZE, DMA_TO_DEVICE); + dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_TO_DEVICE); if (ep->tx_buf[i] != NULL) - free_page((unsigned long)ep->tx_buf[i]); + kfree(ep->tx_buf[i]); } dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs, ep->descs_dma_addr); } -/* - * The hardware enforces a sub-2K maximum packet size, so we put - * two buffers on every hardware page. - */ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) { struct device *dev = ep->dev->dev.parent; @@ -500,48 +496,41 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) if (ep->descs == NULL) return 1; - for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) { - void *page; + for (i = 0; i < RX_QUEUE_ENTRIES; i++) { + void *buf; dma_addr_t d; - page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); - if (page == NULL) + buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL); + if (buf == NULL) goto err; - d = dma_map_single(dev, page, PAGE_SIZE, DMA_FROM_DEVICE); + d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_FROM_DEVICE); if (dma_mapping_error(dev, d)) { - free_page((unsigned long)page); + kfree(buf); goto err; } - ep->rx_buf[i] = page; + ep->rx_buf[i] = buf; ep->descs->rdesc[i].buf_addr = d; ep->descs->rdesc[i].rdesc1 = (i << 16) | PKT_BUF_SIZE; - - ep->rx_buf[i + 1] = page + PKT_BUF_SIZE; - ep->descs->rdesc[i + 1].buf_addr = d + PKT_BUF_SIZE; - ep->descs->rdesc[i + 1].rdesc1 = ((i + 1) << 16) | PKT_BUF_SIZE; } - for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) { - void *page; + for (i = 0; i < TX_QUEUE_ENTRIES; i++) { + void *buf; dma_addr_t d; - page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); - if (page == NULL) + buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL); + if (buf == NULL) goto err; - d = dma_map_single(dev, page, PAGE_SIZE, DMA_TO_DEVICE); + d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_TO_DEVICE); if (dma_mapping_error(dev, d)) { - free_page((unsigned long)page); + kfree(buf); goto err; } - ep->tx_buf[i] = page; + ep->tx_buf[i] = buf; ep->descs->tdesc[i].buf_addr = d; - - ep->tx_buf[i + 1] = page + PKT_BUF_SIZE; - ep->descs->tdesc[i + 1].buf_addr = d + PKT_BUF_SIZE; } return 0; -- cgit v1.2.3 From 1f758a4341ac83289a549e6ba2d29a08cf639717 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 11 Jun 2011 08:39:57 +0000 Subject: net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent() Commit a197b59ae6e8 (mm: fail GFP_DMA allocations when ZONE_DMA is not configured) made page allocator to return NULL if GFP_DMA is set but CONFIG_ZONE_DMA is disabled. This causes ep93xx_eth to fail: WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638() Modules linked in: [] (unwind_backtrace+0x0/0xf4) from [] (warn_slowpath_common+0x48/0x60) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (__alloc_pages_nodemask+0x11c/0x638) [] (__alloc_pages_nodemask+0x11c/0x638) from [] (__dma_alloc+0x8c/0x3ec) [] (__dma_alloc+0x8c/0x3ec) from [] (dma_alloc_coherent+0x54/0x60) [] (dma_alloc_coherent+0x54/0x60) from [] (ep93xx_open+0x20/0x864) [] (ep93xx_open+0x20/0x864) from [] (__dev_open+0xb8/0x108) [] (__dev_open+0xb8/0x108) from [] (__dev_change_flags+0x70/0x128) [] (__dev_change_flags+0x70/0x128) from [] (dev_change_flags+0x10/0x48) [] (dev_change_flags+0x10/0x48) from [] (ip_auto_config+0x190/0xf68) [] (ip_auto_config+0x190/0xf68) from [] (do_one_initcall+0x34/0x18c) [] (do_one_initcall+0x34/0x18c) from [] (kernel_init+0x94/0x134) [] (kernel_init+0x94/0x134) from [] (kernel_thread_exit+0x0/0x8) Since there is no restrictions for DMA on ep93xx, we can fix this by just removing the GFP_DMA flag from the call. Signed-off-by: Mika Westerberg Acked-by: Russell King Acked-by: H Hartley Sweeten Tested-by: Petr Stetiar Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 97bf6b10ce61..bef38116abaf 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -492,7 +492,7 @@ static int ep93xx_alloc_buffers(struct ep93xx_priv *ep) int i; ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs), - &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA); + &ep->descs_dma_addr, GFP_KERNEL); if (ep->descs == NULL) return 1; -- cgit v1.2.3 From f1c089e3192f1afdfa76226dc38ef81b08ac810d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Sat, 11 Jun 2011 08:39:58 +0000 Subject: net: ep93xx_eth: fix DMA API violations Russell King said: > > So, to summarize what its doing: > > 1. It allocates buffers for rx and tx. > 2. It maps them with dma_map_single(). > This transfers ownership of the buffer to the DMA device. > 3. In ep93xx_xmit, > 3a. It copies the data into the buffer with skb_copy_and_csum_dev() > This violates the DMA buffer ownership rules - the CPU should > not be writing to this buffer while it is (in principle) owned > by the DMA device. > 3b. It then calls dma_sync_single_for_cpu() for the buffer. > This transfers ownership of the buffer to the CPU, which surely > is the wrong direction. > 4. In ep93xx_rx, > 4a. It calls dma_sync_single_for_cpu() for the buffer. > This at least transfers the DMA buffer ownership to the CPU > before the CPU reads the buffer > 4b. It then uses skb_copy_to_linear_data() to copy the data out. > At no point does it transfer ownership back to the DMA device. > 5. When the driver is removed, it dma_unmap_single()'s the buffer. > This transfers ownership of the buffer to the CPU. > 6. It frees the buffer. > > While it may work on ep93xx, it's not respecting the DMA API rules, > and with DMA debugging enabled it will probably encounter quite a few > warnings. This patch fixes these violations. Signed-off-by: Mika Westerberg Acked-by: Russell King Acked-by: H Hartley Sweeten Tested-by: Petr Stetiar Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index bef38116abaf..0b46b8ea0e80 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -283,10 +283,14 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget) skb = dev_alloc_skb(length + 2); if (likely(skb != NULL)) { + struct ep93xx_rdesc *rxd = &ep->descs->rdesc[entry]; skb_reserve(skb, 2); - dma_sync_single_for_cpu(dev->dev.parent, ep->descs->rdesc[entry].buf_addr, + dma_sync_single_for_cpu(dev->dev.parent, rxd->buf_addr, length, DMA_FROM_DEVICE); skb_copy_to_linear_data(skb, ep->rx_buf[entry], length); + dma_sync_single_for_device(dev->dev.parent, + rxd->buf_addr, length, + DMA_FROM_DEVICE); skb_put(skb, length); skb->protocol = eth_type_trans(skb, dev); @@ -348,6 +352,7 @@ poll_some_more: static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) { struct ep93xx_priv *ep = netdev_priv(dev); + struct ep93xx_tdesc *txd; int entry; if (unlikely(skb->len > MAX_PKT_SIZE)) { @@ -359,11 +364,14 @@ static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev) entry = ep->tx_pointer; ep->tx_pointer = (ep->tx_pointer + 1) & (TX_QUEUE_ENTRIES - 1); - ep->descs->tdesc[entry].tdesc1 = - TDESC1_EOF | (entry << 16) | (skb->len & 0xfff); + txd = &ep->descs->tdesc[entry]; + + txd->tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff); + dma_sync_single_for_cpu(dev->dev.parent, txd->buf_addr, skb->len, + DMA_TO_DEVICE); skb_copy_and_csum_dev(skb, ep->tx_buf[entry]); - dma_sync_single_for_cpu(dev->dev.parent, ep->descs->tdesc[entry].buf_addr, - skb->len, DMA_TO_DEVICE); + dma_sync_single_for_device(dev->dev.parent, txd->buf_addr, skb->len, + DMA_TO_DEVICE); dev_kfree_skb(skb); spin_lock_irq(&ep->tx_pending_lock); -- cgit v1.2.3 From 1ffde03d2aa112750468cff07efc9e0a504517dd Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sun, 12 Jun 2011 09:40:49 +0000 Subject: 3c503: fix broken IRQ autoprobing Fix broken IRQ autoprobing in 3c503 driver: - improper IRQ freeing (does not free IRQs causes WARN) - missing break when an working IRQ is found The driver works with this patch. Signed-off-by: Ondrej Zary Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/3c503.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index d84f6e8903a5..5b732988d493 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -412,7 +412,7 @@ el2_open(struct net_device *dev) outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); outb_p(0x00, E33G_IDCFR); msleep(1); - free_irq(*irqp, el2_probe_interrupt); + free_irq(*irqp, &seen); if (!seen) continue; @@ -422,6 +422,7 @@ el2_open(struct net_device *dev) continue; if (retval < 0) goto err_disable; + break; } while (*++irqp); if (*irqp == 0) { -- cgit v1.2.3 From 9281b2a2e2e02ad4bcc2fdd11797709b815d5f8e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 13 Jun 2011 08:17:36 +0000 Subject: net/hplance: hplance_init() should be __devinit WARNING: vmlinux.o(.devinit.text+0x253e): Section mismatch in reference from the function hplance_init_one() to the function .init.text:hplance_init() The forward declaration had the correct attribute, but the actual function definition hadn't. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/hplance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c index b6060f7538df..a900d5bf2948 100644 --- a/drivers/net/hplance.c +++ b/drivers/net/hplance.c @@ -135,7 +135,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d) } /* Initialise a single lance board at the given DIO device */ -static void __init hplance_init(struct net_device *dev, struct dio_dev *d) +static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d) { unsigned long va = (d->resource.start + DIO_VIRADDRBASE); struct hplance_private *lp; -- cgit v1.2.3 From a7b21165c06f28230768d203285d06cac4f18f0b Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Mon, 13 Jun 2011 09:49:27 +0530 Subject: mwifiex: Fixing NULL pointer dereference Following OOPS was seen when booting with card inserted BUG: unable to handle kernel NULL pointer dereference at 0000004c IP: [] cfg80211_get_drvinfo+0x21/0x115 [cfg80211] *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: iwl3945 iwl_legacy mwifiex_sdio mac80211 11 sdhci_pci sdhci pl2303 'ethtool' on the mwifiex device returned this OOPS as wiphy_dev() returned NULL. Adding missing set_wiphy_dev() call to fix the problem. Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 660831ce293c..687c1f223497 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1288,6 +1288,8 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac, *(unsigned long *) wdev_priv = (unsigned long) priv; + set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev); + ret = wiphy_register(wdev->wiphy); if (ret < 0) { dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n", -- cgit v1.2.3 From 3373b28e5af4a0b3c6cb39372581dcc1e41322ff Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Mon, 13 Jun 2011 16:26:15 +0530 Subject: mwl8k: Tell firmware to generate CCMP header Post commit e4eefec73ea0a740bfe8736e3ac30dfe92fe392b, the stack is not generating the CCMP header for us anymore. This broke the CCMP functionality since firmware was not doing this either. Set a flag to tell the firmware to generate the CCMP header Signed-off-by: Nishant Sarmukadam Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 32261189bcef..aeac3cc4dbe4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2474,6 +2474,7 @@ struct mwl8k_cmd_set_hw_spec { * faster client. */ #define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400 +#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200 #define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010 @@ -2510,7 +2511,8 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw) cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON | - MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY); + MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY | + MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR); cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); -- cgit v1.2.3 From d40261236e8e278cb1936cb5e934262971692b10 Mon Sep 17 00:00:00 2001 From: "Marius B. Kotsbak" Date: Sun, 12 Jun 2011 02:35:02 +0000 Subject: net/usb: Add Samsung Kalmia driver for Samsung GT-B3730 Introducing driver for the network port of Samsung Kalmia based USB LTE modems. It has also an ACM interface that previous patches associates with the "option" module. To access those interfaces, the modem must first be switched from modem mode using a tool like usb_modeswitch. As the proprietary protocol has been discovered by watching the MS Windows driver behavior, there might be errors in the protocol handling, but stable and fast connection has been established for hours with Norwegian operator NetCom that distributes this modem with their LTE/4G subscription. More and updated information about how to use this driver is available here: http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver Signed-off-by: Marius B. Kotsbak Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 10 ++ drivers/net/usb/Makefile | 1 + drivers/net/usb/kalmia.c | 384 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 395 insertions(+) create mode 100644 drivers/net/usb/kalmia.c (limited to 'drivers/net') diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 9d4f9117260f..84d4608153c9 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -385,6 +385,16 @@ config USB_NET_CX82310_ETH router with USB ethernet port. This driver is for routers only, it will not work with ADSL modems (use cxacru driver instead). +config USB_NET_KALMIA + tristate "Samsung Kalmia based LTE USB modem" + depends on USB_USBNET + help + Choose this option if you have a Samsung Kalmia based USB modem + as Samsung GT-B3730. + + To compile this driver as a module, choose M here: the + module will be called kalmia. + config USB_HSO tristate "Option USB High Speed Mobile Devices" depends on USB && RFKILL diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index c7ec8a5f0a90..c203fa21f6b1 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o +obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o obj-$(CONFIG_USB_IPHETH) += ipheth.o obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c new file mode 100644 index 000000000000..d965fb1e013e --- /dev/null +++ b/drivers/net/usb/kalmia.c @@ -0,0 +1,384 @@ +/* + * USB network interface driver for Samsung Kalmia based LTE USB modem like the + * Samsung GT-B3730 and GT-B3710. + * + * Copyright (C) 2011 Marius Bjoernstad Kotsbak + * + * Sponsored by Quicklink Video Distribution Services Ltd. + * + * Based on the cdc_eem module. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control + * handled by the "option" module and an ethernet data port handled by this + * module. + * + * The stick must first be switched into modem mode by usb_modeswitch + * or similar tool. Then the modem gets sent two initialization packets by + * this module, which gives the MAC address of the device. User space can then + * connect the modem using AT commands through the ACM port and then use + * DHCP on the network interface exposed by this module. Network packets are + * sent to and from the modem in a proprietary format discovered after watching + * the behavior of the windows driver for the modem. + * + * More information about the use of the modem is available in usb_modeswitch + * forum and the project page: + * + * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 + * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver + */ + +/* #define DEBUG */ +/* #define VERBOSE */ + +#define KALMIA_HEADER_LENGTH 6 +#define KALMIA_ALIGN_SIZE 4 +#define KALMIA_USB_TIMEOUT 10000 + +/*-------------------------------------------------------------------------*/ + +static int +kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len, + u8 *buffer, u8 expected_len) +{ + int act_len; + int status; + + netdev_dbg(dev->net, "Sending init packet"); + + status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02), + init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT); + if (status != 0) { + netdev_err(dev->net, + "Error sending init packet. Status %i, length %i\n", + status, act_len); + return status; + } + else if (act_len != init_msg_len) { + netdev_err(dev->net, + "Did not send all of init packet. Bytes sent: %i", + act_len); + } + else { + netdev_dbg(dev->net, "Successfully sent init packet."); + } + + status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81), + buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT); + + if (status != 0) + netdev_err(dev->net, + "Error receiving init result. Status %i, length %i\n", + status, act_len); + else if (act_len != expected_len) + netdev_err(dev->net, "Unexpected init result length: %i\n", + act_len); + + return status; +} + +static int +kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) +{ + char init_msg_1[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00 }; + char init_msg_2[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4, + 0x00, 0x00 }; + char receive_buf[28]; + int status; + + status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1) + / sizeof(init_msg_1[0]), receive_buf, 24); + if (status != 0) + return status; + + status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2) + / sizeof(init_msg_2[0]), receive_buf, 28); + if (status != 0) + return status; + + memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN); + + return status; +} + +static int +kalmia_bind(struct usbnet *dev, struct usb_interface *intf) +{ + u8 status; + u8 ethernet_addr[ETH_ALEN]; + + /* Don't bind to AT command interface */ + if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + return -EINVAL; + + dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK); + dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK); + dev->status = NULL; + + dev->net->hard_header_len += KALMIA_HEADER_LENGTH; + dev->hard_mtu = 1400; + dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing + + status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr); + + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN); + memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN); + + return status; +} + +static struct sk_buff * +kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 content_len; + unsigned char *header_start; + unsigned char ether_type_1, ether_type_2; + u8 remainder, padlen = 0; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom + >= KALMIA_HEADER_LENGTH)) + goto done; + + if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH + + KALMIA_ALIGN_SIZE)) { + skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH, + skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH, + KALMIA_ALIGN_SIZE, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + + done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH); + ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12]; + ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13]; + + netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1, + ether_type_2); + + /* According to empiric data for data packages */ + header_start[0] = 0x57; + header_start[1] = 0x44; + content_len = skb->len - KALMIA_HEADER_LENGTH; + header_start[2] = (content_len & 0xff); /* low byte */ + header_start[3] = (content_len >> 8); /* high byte */ + + header_start[4] = ether_type_1; + header_start[5] = ether_type_2; + + /* Align to 4 bytes by padding with zeros */ + remainder = skb->len % KALMIA_ALIGN_SIZE; + if (remainder > 0) { + padlen = KALMIA_ALIGN_SIZE - remainder; + memset(skb_put(skb, padlen), 0, padlen); + } + + netdev_dbg( + dev->net, + "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.", + content_len, padlen, header_start[0], header_start[1], + header_start[2], header_start[3], header_start[4], + header_start[5]); + + return skb; +} + +static int +kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. + */ + const u8 HEADER_END_OF_USB_PACKET[] = + { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 }; + const u8 EXPECTED_UNKNOWN_HEADER_1[] = + { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 }; + const u8 EXPECTED_UNKNOWN_HEADER_2[] = + { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 }; + u8 i = 0; + + /* incomplete header? */ + if (skb->len < KALMIA_HEADER_LENGTH) + return 0; + + do { + struct sk_buff *skb2 = NULL; + u8 *header_start; + u16 usb_packet_length, ether_packet_length; + int is_last; + + header_start = skb->data; + + if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) { + if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1, + sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp( + header_start, EXPECTED_UNKNOWN_HEADER_2, + sizeof(EXPECTED_UNKNOWN_HEADER_2))) { + netdev_dbg( + dev->net, + "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + else { + netdev_err( + dev->net, + "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + return 0; + } + } + else + netdev_dbg( + dev->net, + "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], header_start[2], + header_start[3], header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + + /* subtract start header and end header */ + usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH); + ether_packet_length = header_start[2] + (header_start[3] << 8); + skb_pull(skb, KALMIA_HEADER_LENGTH); + + /* Some small packets misses end marker */ + if (usb_packet_length < ether_packet_length) { + ether_packet_length = usb_packet_length + + KALMIA_HEADER_LENGTH; + is_last = true; + } + else { + netdev_dbg(dev->net, "Correct package length #%i", i + + 1); + + is_last = (memcmp(skb->data + ether_packet_length, + HEADER_END_OF_USB_PACKET, + sizeof(HEADER_END_OF_USB_PACKET)) == 0); + if (!is_last) { + header_start = skb->data + ether_packet_length; + netdev_dbg( + dev->net, + "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + } + + if (is_last) { + skb2 = skb; + } + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + skb_trim(skb2, ether_packet_length); + + if (is_last) { + return 1; + } + else { + usbnet_skb_return(dev, skb2); + skb_pull(skb, ether_packet_length); + } + + i++; + } + while (skb->len); + + return 1; +} + +static const struct driver_info kalmia_info = { + .description = "Samsung Kalmia LTE USB dongle", + .flags = FLAG_WWAN, + .bind = kalmia_bind, + .rx_fixup = kalmia_rx_fixup, + .tx_fixup = kalmia_tx_fixup +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { + /* The unswitched USB ID, to get the module auto loaded: */ + { USB_DEVICE(0x04e8, 0x689a) }, + /* The stick swithed into modem (by e.g. usb_modeswitch): */ + { USB_DEVICE(0x04e8, 0x6889), + .driver_info = (unsigned long) &kalmia_info, }, + { /* EMPTY == end of list */} }; +MODULE_DEVICE_TABLE( usb, products); + +static struct usb_driver kalmia_driver = { + .name = "kalmia", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume +}; + +static int __init kalmia_init(void) +{ + return usb_register(&kalmia_driver); +} +module_init( kalmia_init); + +static void __exit kalmia_exit(void) +{ + usb_deregister(&kalmia_driver); +} +module_exit( kalmia_exit); + +MODULE_AUTHOR("Marius Bjoernstad Kotsbak "); +MODULE_DESCRIPTION("Samsung Kalmia USB network driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From e6539e2b7aee117619153daaf61566dba1e04205 Mon Sep 17 00:00:00 2001 From: Changli Gao Date: Tue, 14 Jun 2011 21:58:13 +0000 Subject: ppp: use PPP_TRANS instead of the magic number 0x20 Signed-off-by: Changli Gao Signed-off-by: David S. Miller --- drivers/net/ppp_async.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index a1b82c9c67d2..c554a397e558 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -523,7 +523,7 @@ static void ppp_async_process(unsigned long arg) #define PUT_BYTE(ap, buf, c, islcp) do { \ if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\ *buf++ = PPP_ESCAPE; \ - *buf++ = c ^ 0x20; \ + *buf++ = c ^ PPP_TRANS; \ } else \ *buf++ = c; \ } while (0) @@ -896,7 +896,7 @@ ppp_async_input(struct asyncppp *ap, const unsigned char *buf, sp = skb_put(skb, n); memcpy(sp, buf, n); if (ap->state & SC_ESCAPE) { - sp[0] ^= 0x20; + sp[0] ^= PPP_TRANS; ap->state &= ~SC_ESCAPE; } } -- cgit v1.2.3 From f1dc045e685ea5424b3445c1ccaa0a25b3d661ec Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 14 Jun 2011 22:07:58 +0000 Subject: phylib: Allow BCM63XX PHY to be selected only on BCM63XX. This PHY is available integrated into BCM63xx series SOCs only. Signed-off-by: Ralf Baechle drivers/net/phy/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 392a6c4b72e5..a70244306c94 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -58,6 +58,7 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX ---help--- Currently supports the 6348 and 6358 PHYs. -- cgit v1.2.3 From 2331038a96ecdad76c50ab223fd48d656d8a1184 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Tue, 14 Jun 2011 23:55:19 +0000 Subject: dp83640: fix phy status frame event parsing If two eternal time stamp events occur at nearly the same time, the phyter will add an extra word into the status frame. This commit fixes the parsing code to recognize and skip over the extra word. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index b0c9522bb535..ead323e56739 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -543,11 +543,20 @@ static void recalibrate(struct dp83640_clock *clock) /* time stamping methods */ -static void decode_evnt(struct dp83640_private *dp83640, - struct phy_txts *phy_txts, u16 ests) +static int decode_evnt(struct dp83640_private *dp83640, + void *data, u16 ests) { + struct phy_txts *phy_txts; struct ptp_clock_event event; int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK; + u16 ext_status = 0; + + if (ests & MULT_EVNT) { + ext_status = *(u16 *) data; + data += sizeof(ext_status); + } + + phy_txts = data; switch (words) { /* fall through in every case */ case 3: @@ -565,6 +574,9 @@ static void decode_evnt(struct dp83640_private *dp83640, event.timestamp = phy2txts(&dp83640->edata); ptp_clock_event(dp83640->clock->ptp_clock, &event); + + words = ext_status ? words + 2 : words + 1; + return words * sizeof(u16); } static void decode_rxts(struct dp83640_private *dp83640, @@ -643,9 +655,7 @@ static void decode_status_frame(struct dp83640_private *dp83640, } else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) { - phy_txts = (struct phy_txts *) ptr; - decode_evnt(dp83640, phy_txts, ests); - size = sizeof(*phy_txts); + size = decode_evnt(dp83640, ptr, ests); } else { size = 0; -- cgit v1.2.3 From ae6e86b7fb15520ac64513ad643de63e0b077aa5 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Tue, 14 Jun 2011 23:55:20 +0000 Subject: dp83640: drop PHY status frames in the driver. The dp83640 PHY provides time stamp and other information via special PHY status frames. Previously, the driver decoded the frames and then let the network stack drop them. This works fine when the PTP messages come over UDP. However, when receiving PTP messages via L2 packets, this creates a problem. The status frames use the official PTP destination MAC address, and so they are delivered to user space along with the "real" frames, causing confusion for applications. This commit fixes the issue by simply dropping the PHY status frames in the driver. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/phy/dp83640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index ead323e56739..2cd8dc5847b4 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -1044,8 +1044,8 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); - /* Let the stack drop this frame. */ - return false; + kfree_skb(skb); + return true; } SKB_PTP_TYPE(skb) = type; -- cgit v1.2.3 From bebd097a0af8bd6c51f50a65f3a435019b0e906a Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 15 Jun 2011 05:25:01 +0000 Subject: tun: teach the tun/tap driver to support netpoll Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave devices in regards to netpoll. Specifically it created a mutually exclusive relationship between being a slave and a netpoll-capable device. This creates problems for KVM because guests relied on needing netconsole active on a slave device to a bridge. Ideally libvirtd could just attach netconsole to the bridge device instead, but thats currently infeasible, because while the bridge device supports netpoll, it requires that all slave interface also support it, but the tun/tap driver currently does not. The most direct solution is to teach tun/tap to support netpoll, which is implemented by the patch below. I've not tested this yet, but its pretty straightforward. Signed-off-by: Neil Horman Reported-by: Rik van Riel CC: Rik van Riel CC: Maxim Krasnyansky CC: Cong Wang CC: "David S. Miller" Reviewed-by: Rik van Riel Tested-by: Rik van Riel Reviewed-by: WANG Cong Signed-off-by: David S. Miller --- drivers/net/tun.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74e94054ab1a..5235f48be1be 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -460,7 +460,23 @@ static u32 tun_net_fix_features(struct net_device *dev, u32 features) return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); } - +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are syncronous operations, we are guaranteed + * never to have pending data when we poll for it + * so theres nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif static const struct net_device_ops tun_netdev_ops = { .ndo_uninit = tun_net_uninit, .ndo_open = tun_net_open, @@ -468,6 +484,9 @@ static const struct net_device_ops tun_netdev_ops = { .ndo_start_xmit = tun_net_xmit, .ndo_change_mtu = tun_net_change_mtu, .ndo_fix_features = tun_net_fix_features, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; static const struct net_device_ops tap_netdev_ops = { @@ -480,6 +499,9 @@ static const struct net_device_ops tap_netdev_ops = { .ndo_set_multicast_list = tun_net_mclist, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; /* Initialize net device. */ -- cgit v1.2.3 From 118133e6580a0c912cda86109b6468b5ffe73f1c Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 16 Jun 2011 12:31:58 +0000 Subject: netdev: bfin_mac: fix memory leak when freeing dma descriptors The size of the desc array is not the size of the desc structure, so when we try to free up things, we leak some parts. Reported-by: Regis Dargent Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 68d45ba2d9b9..6c019e148546 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -52,13 +52,13 @@ MODULE_DESCRIPTION(DRV_DESC); MODULE_ALIAS("platform:bfin_mac"); #if defined(CONFIG_BFIN_MAC_USE_L1) -# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size) -# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr) +# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) +# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) #else -# define bfin_mac_alloc(dma_handle, size) \ - dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL) -# define bfin_mac_free(dma_handle, ptr) \ - dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle) +# define bfin_mac_alloc(dma_handle, size, num) \ + dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) +# define bfin_mac_free(dma_handle, ptr, num) \ + dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) #endif #define PKT_BUF_SZ 1580 @@ -95,7 +95,7 @@ static void desc_list_free(void) t = t->next; } } - bfin_mac_free(dma_handle, tx_desc); + bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); } if (rx_desc) { @@ -109,7 +109,7 @@ static void desc_list_free(void) r = r->next; } } - bfin_mac_free(dma_handle, rx_desc); + bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); } } @@ -126,13 +126,13 @@ static int desc_list_init(void) #endif tx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_tx) * + sizeof(struct net_dma_desc_tx), CONFIG_BFIN_TX_DESC_NUM); if (tx_desc == NULL) goto init_error; rx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_rx) * + sizeof(struct net_dma_desc_rx), CONFIG_BFIN_RX_DESC_NUM); if (rx_desc == NULL) goto init_error; -- cgit v1.2.3 From cab758ef30e0e40f783627abc4b66d1b48fecd49 Mon Sep 17 00:00:00 2001 From: Clive Stubbings Date: Thu, 16 Jun 2011 22:30:39 +0000 Subject: fs_enet: fix freescale FCC ethernet dp buffer alignment The RIPTR and TIPTR (receive/transmit internal temporary data pointer), used by microcode as a temporary buffer for data, must be 32-byte aligned according to the RM for MPC8247. Tested on mgcoge. Signed-off-by: Clive Stubbings Signed-off-by: Holger Brunck cc: Pantelis Antoniou cc: Vitaly Bordug cc: netdev@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/fs_enet/mac-fcc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 7a84e45487e8..7583a9572bcc 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -105,7 +105,7 @@ static int do_pd_setup(struct fs_enet_private *fep) goto out_ep; fep->fcc.mem = (void __iomem *)cpm2_immr; - fpi->dpram_offset = cpm_dpalloc(128, 8); + fpi->dpram_offset = cpm_dpalloc(128, 32); if (IS_ERR_VALUE(fpi->dpram_offset)) { ret = fpi->dpram_offset; goto out_fcccp; -- cgit v1.2.3 From d0fd64c1de437bdf91c32d4f84a53fa4b2150348 Mon Sep 17 00:00:00 2001 From: Pavel Shved Date: Fri, 17 Jun 2011 06:25:10 +0000 Subject: farsync: add module_put to error path in fst_open() The fst_open() function, after a successful try_module_get() may return an error code if hdlc_open() returns it. However, it does not put the module on this error path. This patch adds the necessary module_put() call. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Pavel Shved Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index e050bd65e037..777d1a4e81b2 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2203,8 +2203,10 @@ fst_open(struct net_device *dev) if (port->mode != FST_RAW) { err = hdlc_open(dev); - if (err) + if (err) { + module_put(THIS_MODULE); return err; + } } fst_openport(port); -- cgit v1.2.3 From 3744100e05c4e403ed21c99cd389c7e784664e4b Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Fri, 17 Jun 2011 22:58:54 +0200 Subject: r8169: fix static initializers. Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ef1ce2ebeb4a..05d81780d1fd 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1621,7 +1621,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, * * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec */ - static const struct { + static const struct rtl_mac_info { u32 mask; u32 val; int mac_version; @@ -1689,7 +1689,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, /* Catch-all */ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE } - }, *p = mac_info; + }; + const struct rtl_mac_info *p = mac_info; u32 reg; reg = RTL_R32(TxConfig); @@ -3681,7 +3682,7 @@ static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { - static const struct { + static const struct rtl_cfg2_info { u32 mac_version; u32 clk; u32 val; @@ -3690,7 +3691,8 @@ static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff }, { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff } - }, *p = cfg2_info; + }; + const struct rtl_cfg2_info *p = cfg2_info; unsigned int i; u32 clk; -- cgit v1.2.3 From cefa9993f161c1c2b6b91b7ea2e84a9bfbd43d2e Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Sun, 19 Jun 2011 16:13:01 -0700 Subject: netpoll: copy dev name of slaves to struct netpoll Otherwise we will not see the name of the slave dev in error message: [ 388.469446] (null): doesn't support polling, aborting. Signed-off-by: WANG Cong Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 1 + net/bridge/br_device.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 652b30e525d0..eafe44a528ac 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1297,6 +1297,7 @@ static inline int slave_enable_netpoll(struct slave *slave) goto out; np->dev = slave->dev; + strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { kfree(np); diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index a6b2f86378c7..c188c803c09c 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -243,6 +243,7 @@ int br_netpoll_enable(struct net_bridge_port *p) goto out; np->dev = p->dev; + strlcpy(np->dev_name, p->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { -- cgit v1.2.3 From 658924dc9ae2ca8e3c46f36306f5dbd501cf4688 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 19 Jun 2011 12:43:33 +0000 Subject: hp100: fix an skb->len race As soon as skb is given to hardware and spinlock released, TX completion can free skb under us. Therefore, we should update netdev stats before spinlock release. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/hp100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8e10d2f6a5ad..c3ecb118c1df 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1580,12 +1580,12 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb, hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */ lp->txrcommit++; - spin_unlock_irqrestore(&lp->lock, flags); - /* Update statistics */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; + spin_unlock_irqrestore(&lp->lock, flags); + return NETDEV_TX_OK; drop: -- cgit v1.2.3 From c82b9d7fe7464aec78210544948564ffe3bb2d2b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 19 Jun 2011 20:26:15 +0000 Subject: netxen: fix race in skb->len access As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: Eric Dumazet CC: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b644383017f9..c0788a31ff0f 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1965,11 +1965,11 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netxen_tso_check(netdev, tx_ring, first_desc, skb); - netxen_nic_update_cmd_producer(adapter, tx_ring); - adapter->stats.txbytes += skb->len; adapter->stats.xmitcalled++; + netxen_nic_update_cmd_producer(adapter, tx_ring); + return NETDEV_TX_OK; drop_packet: -- cgit v1.2.3 From 384420409d9b5d4443940abace49363d26135412 Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Sun, 19 Jun 2011 21:48:06 +0000 Subject: pxa168_eth: fix race in transmit path. Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap Cc: Zhangfei Gao Cc: Philip Rakity Signed-off-by: Richard Cochran Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/pxa168_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 89f7540d90f9..5f597ca592bb 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -1273,7 +1273,7 @@ static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) wmb(); wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD); - stats->tx_bytes += skb->len; + stats->tx_bytes += length; stats->tx_packets++; dev->trans_start = jiffies; if (pep->tx_ring_size - pep->tx_desc_count <= 1) { -- cgit v1.2.3