From 13bb9483e190b95b04b22280ec9efa6b48469fd6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Aug 2010 10:46:33 +0200 Subject: iwlwifi: prepare for PAN queue/fifo assignment PAN ucode will require a different queue assignment, in particular queue 9 instead of 4 should be used for commands. This is required because the ucode will stop/start queues 4 and 8 depending on the PAN state, since queue 8 will be used for PAN multicast (after DTIM). Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-prph.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/net/wireless/iwlwifi/iwl-prph.h') diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index b1f101caf19d..5469655646ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -306,7 +306,7 @@ * at a time, until receiving ACK from receiving station, or reaching * retry limit and giving up. * - * The command queue (#4) must use this mode! + * The command queue (#4/#9) must use this mode! * This mode does not require use of the Byte Count table in host DRAM. * * Driver controls scheduler operation via 3 means: @@ -322,7 +322,7 @@ * (1024 bytes for each queue). * * After receiving "Alive" response from uCode, driver must initialize - * the scheduler (especially for queue #4, the command queue, otherwise + * the scheduler (especially for queue #4/#9, the command queue, otherwise * the driver can't issue commands!): */ @@ -555,8 +555,9 @@ #define IWLAGN_SCD_TRANSLATE_TBL_OFFSET_QUEUE(x) \ ((IWLAGN_SCD_TRANSLATE_TBL_OFFSET + ((x) * 2)) & 0xfffc) -#define IWLAGN_SCD_QUEUECHAIN_SEL_ALL(x) (((1<<(x)) - 1) &\ - (~(1<hw_params.max_txq_num) - 1) &\ + (~(1<<(priv)->cmd_queue))) #define IWLAGN_SCD_BASE (PRPH_BASE + 0xa02c00) -- cgit v1.2.3