From 9156b30b33acaef9ce602fb31230154f13af4881 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 19 Aug 2013 09:11:56 +0300 Subject: bnx2x: dropless flow control not always functional Since commit 3deb816 "bnx2x: Add a periodic task for link PHY events" link state changes can be detected not only via the attention flow but also from the periodic task. If the link state will change in such a manner (i.e., via the periodic task), dropless flow-control will not be configured. This patch remedies the issue, adding the missing configuration to all required flows. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 36 +++++++++++++++--------- 1 file changed, 23 insertions(+), 13 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 955d6cfd9cb7..c009f1951ec1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -2261,6 +2261,23 @@ static void bnx2x_set_requested_fc(struct bnx2x *bp) bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH; } +static void bnx2x_init_dropless_fc(struct bnx2x *bp) +{ + u32 pause_enabled = 0; + + if (!CHIP_IS_E1(bp) && bp->dropless_fc && bp->link_vars.link_up) { + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + pause_enabled = 1; + + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_ETH_PAUSE_ENABLED_OFFSET(BP_PORT(bp)), + pause_enabled); + } + + DP(NETIF_MSG_IFUP | NETIF_MSG_LINK, "dropless_fc is %s\n", + pause_enabled ? "enabled" : "disabled"); +} + int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) { int rc, cfx_idx = bnx2x_get_link_cfg_idx(bp); @@ -2294,6 +2311,8 @@ int bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode) bnx2x_release_phy_lock(bp); + bnx2x_init_dropless_fc(bp); + bnx2x_calc_fc_adv(bp); if (bp->link_vars.link_up) { @@ -2315,6 +2334,8 @@ void bnx2x_link_set(struct bnx2x *bp) bnx2x_phy_init(&bp->link_params, &bp->link_vars); bnx2x_release_phy_lock(bp); + bnx2x_init_dropless_fc(bp); + bnx2x_calc_fc_adv(bp); } else BNX2X_ERR("Bootcode is missing - can not set link\n"); @@ -2556,20 +2577,9 @@ static void bnx2x_link_attn(struct bnx2x *bp) bnx2x_link_update(&bp->link_params, &bp->link_vars); - if (bp->link_vars.link_up) { - - /* dropless flow control */ - if (!CHIP_IS_E1(bp) && bp->dropless_fc) { - int port = BP_PORT(bp); - u32 pause_enabled = 0; - - if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) - pause_enabled = 1; + bnx2x_init_dropless_fc(bp); - REG_WR(bp, BAR_USTRORM_INTMEM + - USTORM_ETH_PAUSE_ENABLED_OFFSET(port), - pause_enabled); - } + if (bp->link_vars.link_up) { if (bp->link_vars.mac_type != MAC_TYPE_EMAC) { struct host_port_stats *pstats; -- cgit v1.2.3 From 07b4eb3b53f692a75fc0bc35c43345f331b7cca4 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 19 Aug 2013 09:11:57 +0300 Subject: bnx2x: Change DCB context handling After notification that DCBX configuration has ended arrived to the driver, the driver configured the FW/HW in sleepless context. As a result, it was possible to reach a race (mostly with CNIC registration) in which the configuration will return a timeout, failing to set the DCBX results correctly. This patch moves the configuration following the DCBX end into the slowpath RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the configuration to cope with such races. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 40 +++++++++++++++++++----- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h | 3 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 ++++ 4 files changed, 43 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index ce9b387b5a19..00b88cbfde25 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1333,6 +1333,8 @@ enum { BNX2X_SP_RTNL_VFPF_CHANNEL_DOWN, BNX2X_SP_RTNL_VFPF_STORM_RX_MODE, BNX2X_SP_RTNL_HYPERVISOR_VLAN, + BNX2X_SP_RTNL_TX_STOP, + BNX2X_SP_RTNL_TX_RESUME, }; struct bnx2x_prev_path_list { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index f9122f2d6b65..d537d51a2d2b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -30,10 +30,8 @@ #include "bnx2x_dcb.h" /* forward declarations of dcbx related functions */ -static int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp); static void bnx2x_pfc_set_pfc(struct bnx2x *bp); static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp); -static int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp); static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp, u32 *set_configuration_ets_pg, u32 *pri_pg_tbl); @@ -425,30 +423,52 @@ static void bnx2x_pfc_set_pfc(struct bnx2x *bp) bnx2x_pfc_clear(bp); } -static int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp) +int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp) { struct bnx2x_func_state_params func_params = {NULL}; + int rc; func_params.f_obj = &bp->func_obj; func_params.cmd = BNX2X_F_CMD_TX_STOP; + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + DP(BNX2X_MSG_DCB, "STOP TRAFFIC\n"); - return bnx2x_func_state_change(bp, &func_params); + + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { + BNX2X_ERR("Unable to hold traffic for HW configuration\n"); + bnx2x_panic(); + } + + return rc; } -static int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp) +int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp) { struct bnx2x_func_state_params func_params = {NULL}; struct bnx2x_func_tx_start_params *tx_params = &func_params.params.tx_start; + int rc; func_params.f_obj = &bp->func_obj; func_params.cmd = BNX2X_F_CMD_TX_START; + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + __set_bit(RAMROD_RETRY, &func_params.ramrod_flags); + bnx2x_dcbx_fw_struct(bp, tx_params); DP(BNX2X_MSG_DCB, "START TRAFFIC\n"); - return bnx2x_func_state_change(bp, &func_params); + + rc = bnx2x_func_state_change(bp, &func_params); + if (rc) { + BNX2X_ERR("Unable to resume traffic after HW configuration\n"); + bnx2x_panic(); + } + + return rc; } static void bnx2x_dcbx_2cos_limit_update_ets_config(struct bnx2x *bp) @@ -744,7 +764,9 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state) if (IS_MF(bp)) bnx2x_link_sync_notify(bp); - bnx2x_dcbx_stop_hw_tx(bp); + set_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state); + + schedule_delayed_work(&bp->sp_rtnl_task, 0); return; } @@ -757,7 +779,9 @@ void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state) /* ets may affect cmng configuration: reinit it in hw */ bnx2x_set_local_cmng(bp); - bnx2x_dcbx_resume_hw_tx(bp); + set_bit(BNX2X_SP_RTNL_TX_RESUME, &bp->sp_rtnl_state); + + schedule_delayed_work(&bp->sp_rtnl_task, 0); return; case BNX2X_DCBX_STATE_TX_RELEASED: diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h index 125bd1b6586f..804b8f64463e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h @@ -199,4 +199,7 @@ extern const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops; int bnx2x_dcbnl_update_applist(struct bnx2x *bp, bool delall); #endif /* BCM_DCBNL */ +int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp); +int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp); + #endif /* BNX2X_DCB_H */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c009f1951ec1..b8d7c3ba685e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9655,6 +9655,12 @@ sp_rtnl_not_reset: &bp->sp_rtnl_state)) bnx2x_pf_set_vfs_vlan(bp); + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_STOP, &bp->sp_rtnl_state)) + bnx2x_dcbx_stop_hw_tx(bp); + + if (test_and_clear_bit(BNX2X_SP_RTNL_TX_RESUME, &bp->sp_rtnl_state)) + bnx2x_dcbx_resume_hw_tx(bp); + /* work which needs rtnl lock not-taken (as it takes the lock itself and * can be called from other contexts as well) */ -- cgit v1.2.3 From 79b17a9493a79923cc1af4da64e1c4931273f0f5 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Mon, 19 Aug 2013 09:11:58 +0300 Subject: bnx2x: Consider DCBX remote error When publishing information via getfeatcfg(), bnx2x driver didn't consider remote errors (e.g., switch that doesn't support DCBX) when setting the error flags. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index d537d51a2d2b..fcf2761d8828 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -2391,21 +2391,24 @@ static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid, case DCB_FEATCFG_ATTR_PG: if (bp->dcbx_local_feat.ets.enabled) *flags |= DCB_FEATCFG_ENABLE; - if (bp->dcbx_error & DCBX_LOCAL_ETS_ERROR) + if (bp->dcbx_error & (DCBX_LOCAL_ETS_ERROR | + DCBX_REMOTE_MIB_ERROR)) *flags |= DCB_FEATCFG_ERROR; break; case DCB_FEATCFG_ATTR_PFC: if (bp->dcbx_local_feat.pfc.enabled) *flags |= DCB_FEATCFG_ENABLE; if (bp->dcbx_error & (DCBX_LOCAL_PFC_ERROR | - DCBX_LOCAL_PFC_MISMATCH)) + DCBX_LOCAL_PFC_MISMATCH | + DCBX_REMOTE_MIB_ERROR)) *flags |= DCB_FEATCFG_ERROR; break; case DCB_FEATCFG_ATTR_APP: if (bp->dcbx_local_feat.app.enabled) *flags |= DCB_FEATCFG_ENABLE; if (bp->dcbx_error & (DCBX_LOCAL_APP_ERROR | - DCBX_LOCAL_APP_MISMATCH)) + DCBX_LOCAL_APP_MISMATCH | + DCBX_REMOTE_MIB_ERROR)) *flags |= DCB_FEATCFG_ERROR; break; default: -- cgit v1.2.3 From aeeddb8b9e76d1f250d58b40e8dba8614d61368b Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 19 Aug 2013 09:11:59 +0300 Subject: bnx2x: prevent VF benign attentions During probe, VFs might erroneously try to access the shared memory (which only PFs are capabale of accessing), causing benign attentions to appear. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index b8d7c3ba685e..8bdc8b973007 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11163,6 +11163,9 @@ static bool bnx2x_get_dropless_info(struct bnx2x *bp) int tmp; u32 cfg; + if (IS_VF(bp)) + return 0; + if (IS_MF(bp) && !CHIP_IS_E1x(bp)) { /* Take function: tmp = func */ tmp = BP_ABS_FUNC(bp); -- cgit v1.2.3 From 5ae30d78042ab7790c40b530153c8fdabe1c0ee1 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 19 Aug 2013 09:12:00 +0300 Subject: bnx2x: Protect against VFs' ndos when SR-IOV is disabled Since SR-IOV can be activated dynamically and iproute2 can be called asynchronously, the various callbacks need a robust sanity check before attempting to access the SR-IOV database and members since there are numerous states in which it can find the driver (e.g., PF is down, sriov was not enabled yet, VF is down, etc.). In many of the states the callback result will be null pointer dereference. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 49 ++++++++++++++--------- 1 file changed, 31 insertions(+), 18 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 44104fb27947..d414b493f80d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3084,8 +3084,9 @@ void bnx2x_disable_sriov(struct bnx2x *bp) pci_disable_sriov(bp->pdev); } -static int bnx2x_vf_ndo_sanity(struct bnx2x *bp, int vfidx, - struct bnx2x_virtf *vf) +static int bnx2x_vf_ndo_prep(struct bnx2x *bp, int vfidx, + struct bnx2x_virtf **vf, + struct pf_vf_bulletin_content **bulletin) { if (bp->state != BNX2X_STATE_OPEN) { BNX2X_ERR("vf ndo called though PF is down\n"); @@ -3103,12 +3104,22 @@ static int bnx2x_vf_ndo_sanity(struct bnx2x *bp, int vfidx, return -EINVAL; } - if (!vf) { + /* init members */ + *vf = BP_VF(bp, vfidx); + *bulletin = BP_VF_BULLETIN(bp, vfidx); + + if (!*vf) { BNX2X_ERR("vf ndo called but vf was null. vfidx was %d\n", vfidx); return -EINVAL; } + if (!*bulletin) { + BNX2X_ERR("vf ndo called but Bulletin Board struct is null. vfidx was %d\n", + vfidx); + return -EINVAL; + } + return 0; } @@ -3116,17 +3127,19 @@ int bnx2x_get_vf_config(struct net_device *dev, int vfidx, struct ifla_vf_info *ivi) { struct bnx2x *bp = netdev_priv(dev); - struct bnx2x_virtf *vf = BP_VF(bp, vfidx); - struct bnx2x_vlan_mac_obj *mac_obj = &bnx2x_vfq(vf, 0, mac_obj); - struct bnx2x_vlan_mac_obj *vlan_obj = &bnx2x_vfq(vf, 0, vlan_obj); - struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); + struct bnx2x_virtf *vf = NULL; + struct pf_vf_bulletin_content *bulletin = NULL; + struct bnx2x_vlan_mac_obj *mac_obj; + struct bnx2x_vlan_mac_obj *vlan_obj; int rc; - /* sanity */ - rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf); + /* sanity and init */ + rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin); if (rc) return rc; - if (!mac_obj || !vlan_obj || !bulletin) { + mac_obj = &bnx2x_vfq(vf, 0, mac_obj); + vlan_obj = &bnx2x_vfq(vf, 0, vlan_obj); + if (!mac_obj || !vlan_obj) { BNX2X_ERR("VF partially initialized\n"); return -EINVAL; } @@ -3183,11 +3196,11 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac) { struct bnx2x *bp = netdev_priv(dev); int rc, q_logical_state; - struct bnx2x_virtf *vf = BP_VF(bp, vfidx); - struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); + struct bnx2x_virtf *vf = NULL; + struct pf_vf_bulletin_content *bulletin = NULL; - /* sanity */ - rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf); + /* sanity and init */ + rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin); if (rc) return rc; if (!is_valid_ether_addr(mac)) { @@ -3249,11 +3262,11 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) { struct bnx2x *bp = netdev_priv(dev); int rc, q_logical_state; - struct bnx2x_virtf *vf = BP_VF(bp, vfidx); - struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx); + struct bnx2x_virtf *vf = NULL; + struct pf_vf_bulletin_content *bulletin = NULL; - /* sanity */ - rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf); + /* sanity and init */ + rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin); if (rc) return rc; -- cgit v1.2.3 From 49baea881689a5a0d597d5d636e13567a4c449a6 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Mon, 19 Aug 2013 09:12:01 +0300 Subject: bnx2x: set VF DMAE when first function has 0 supported VFs There are possible HW configurations in which PFs will have SR-IOV capability but will have Max VFs set to 0 - this happens when there are Multi-Function devices where the VFs are allocated to only some of the PFs. DMAE is configured to support VFs only if the configuring PF has supported VFs. In case the first PF to be loaded will be one without supported VFs, it will not configure DMAE to the VF-supporting mode. When VFs of other PFs will be loaded later on, they will not be able to communicate with their PF. This changes the requirement for configuring DMAE for VF-supporting mode; If the device has SR-IOV capabilities there must be some PF that has max supported VFs > 0, thus it will configure the DMAE for supporting VFs. Signed-off-by: Ariel Elior Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index d414b493f80d..ad83f4b48777 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1747,11 +1747,8 @@ void bnx2x_iov_init_dq(struct bnx2x *bp) void bnx2x_iov_init_dmae(struct bnx2x *bp) { - DP(BNX2X_MSG_IOV, "SRIOV is %s\n", IS_SRIOV(bp) ? "ON" : "OFF"); - if (!IS_SRIOV(bp)) - return; - - REG_WR(bp, DMAE_REG_BACKWARD_COMP_EN, 0); + if (pci_find_ext_capability(bp->pdev, PCI_EXT_CAP_ID_SRIOV)) + REG_WR(bp, DMAE_REG_BACKWARD_COMP_EN, 0); } static int bnx2x_vf_bus(struct bnx2x *bp, int vfid) -- cgit v1.2.3 From 8f9d5138035de0940358cfb36eed16ebdaf5a4e5 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Sat, 17 Aug 2013 11:00:02 +0200 Subject: r8169: remember WOL preferences on driver load Do not clear Broadcast/Multicast/Unicast Wake Flag or LanWake in Config5. This is necessary to preserve WOL state when the driver is loaded. Although the r8168 vendor driver does not write Config5 (it has been commented out), Hayes Wang from Realtek said that masking bits like this is more sensible. Signed-off-by: Peter Wu Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index b5eb4195fc99..85e5c97191dd 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7088,7 +7088,7 @@ rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) RTL_W8(Cfg9346, Cfg9346_Unlock); RTL_W8(Config1, RTL_R8(Config1) | PMEnable); - RTL_W8(Config5, RTL_R8(Config5) & PMEStatus); + RTL_W8(Config5, RTL_R8(Config5) & (BWF | MWF | UWF | LanWake | PMEStatus)); if ((RTL_R8(Config3) & (LinkUp | MagicPacket)) != 0) tp->features |= RTL_FEATURE_WOL; if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0) -- cgit v1.2.3 From 6e1f99757a2b24b7255263b2240a0eb04215174d Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Thu, 22 Aug 2013 12:23:41 +0530 Subject: be2net: fix disabling TX in be_close() commit fba875591 ("disable TX in be_close()") disabled TX in be_close() to protect be_xmit() from touching freed up queues in the AER recovery flow. But, TX must be disabled *before* cleaning up TX completions in the close() path, not after. This allows be_tx_compl_clean() to free up all TX-req skbs that were notified to the HW. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 181edb522450..4559c35eea13 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2563,8 +2563,8 @@ static int be_close(struct net_device *netdev) /* Wait for all pending tx completions to arrive so that * all tx skbs are freed. */ - be_tx_compl_clean(adapter); netif_tx_disable(netdev); + be_tx_compl_clean(adapter); be_rx_qs_destroy(adapter); -- cgit v1.2.3