From 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:10:59 +0000 Subject: tg3: Avoid null pointer dereference in tg3_interrupt in netconsole mode When netconsole is enabled, logging messages generated during tg3_open can result in a null pointer dereference for the uninitialized tg3 status block. Use the irq_sync flag to disable polling in the early stages. irq_sync is cleared when the driver is enabling interrupts after all initialization is completed. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 78ea90c40e19..d326d9219aa8 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6950,6 +6950,9 @@ static void tg3_poll_controller(struct net_device *dev) int i; struct tg3 *tp = netdev_priv(dev); + if (tg3_irq_sync(tp)) + return; + for (i = 0; i < tp->irq_cnt; i++) tg3_interrupt(tp->napi[i].irq_vec, &tp->napi[i]); } @@ -16367,6 +16370,7 @@ static int tg3_init_one(struct pci_dev *pdev, tp->pm_cap = pm_cap; tp->rx_mode = TG3_DEF_RX_MODE; tp->tx_mode = TG3_DEF_TX_MODE; + tp->irq_sync = 1; if (tg3_debug > 0) tp->msg_enable = tg3_debug; -- cgit v1.2.3 From daf3ec688e057f6060fb9bb0819feac7a8bbf45c Mon Sep 17 00:00:00 2001 From: Nithin Nayak Sujir Date: Mon, 14 Jan 2013 17:11:00 +0000 Subject: tg3: Fix crc errors on jumbo frame receive TG3_PHY_AUXCTL_SMDSP_ENABLE/DISABLE macros do a blind write to the phy auxiliary control register and overwrite the EXT_PKT_LEN (bit 14) resulting in intermittent crc errors on jumbo frames with some link partners. Change the code to do a read/modify/write. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 58 ++++++++++++++++++++++--------------- 1 file changed, 35 insertions(+), 23 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index d326d9219aa8..bdb086934cd9 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -1283,14 +1283,26 @@ static int tg3_phy_auxctl_write(struct tg3 *tp, int reg, u32 set) return tg3_writephy(tp, MII_TG3_AUX_CTRL, set | reg); } -#define TG3_PHY_AUXCTL_SMDSP_ENABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_SMDSP_ENA | \ - MII_TG3_AUXCTL_ACTL_TX_6DB) +static int tg3_phy_toggle_auxctl_smdsp(struct tg3 *tp, bool enable) +{ + u32 val; + int err; + + err = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val); -#define TG3_PHY_AUXCTL_SMDSP_DISABLE(tp) \ - tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, \ - MII_TG3_AUXCTL_ACTL_TX_6DB); + if (err) + return err; + if (enable) + + val |= MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + else + val &= ~MII_TG3_AUXCTL_ACTL_SMDSP_ENA; + + err = tg3_phy_auxctl_write((tp), MII_TG3_AUXCTL_SHDWSEL_AUXCTL, + val | MII_TG3_AUXCTL_ACTL_TX_6DB); + + return err; +} static int tg3_bmcr_reset(struct tg3 *tp) { @@ -2223,7 +2235,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) otp = tp->phy_otp; - if (TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) + if (tg3_phy_toggle_auxctl_smdsp(tp, true)) return; phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT); @@ -2248,7 +2260,7 @@ static void tg3_phy_apply_otp(struct tg3 *tp) ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT); tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) @@ -2284,9 +2296,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up) if (!tp->setlpicnt) { if (current_link_up == 1 && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2302,11 +2314,11 @@ static void tg3_phy_eee_enable(struct tg3 *tp) (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 || tg3_flag(tp, 57765_CLASS)) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { val = MII_TG3_DSP_TAP26_ALNOKO | MII_TG3_DSP_TAP26_RMRXSTO; tg3_phydsp_write(tp, MII_TG3_DSP_TAP26, val); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } val = tr32(TG3_CPMU_EEE_MODE); @@ -2450,7 +2462,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_CTRL1000, CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (err) return err; @@ -2471,7 +2483,7 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x8200); tg3_writephy(tp, MII_TG3_DSP_CONTROL, 0x0000); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); tg3_writephy(tp, MII_CTRL1000, phy9_orig); @@ -2572,10 +2584,10 @@ static int tg3_phy_reset(struct tg3 *tp) out: if ((tp->phy_flags & TG3_PHYFLG_ADC_BUG) && - !TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + !tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x201f, 0x2aaa); tg3_phydsp_write(tp, 0x000a, 0x0323); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } if (tp->phy_flags & TG3_PHYFLG_5704_A0_BUG) { @@ -2584,14 +2596,14 @@ out: } if (tp->phy_flags & TG3_PHYFLG_BER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_phydsp_write(tp, 0x000a, 0x310b); tg3_phydsp_write(tp, 0x201f, 0x9506); tg3_phydsp_write(tp, 0x401f, 0x14e2); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } else if (tp->phy_flags & TG3_PHYFLG_JITTER_BUG) { - if (!TG3_PHY_AUXCTL_SMDSP_ENABLE(tp)) { + if (!tg3_phy_toggle_auxctl_smdsp(tp, true)) { tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a); if (tp->phy_flags & TG3_PHYFLG_ADJUST_TRIM) { tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x110b); @@ -2600,7 +2612,7 @@ out: } else tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b); - TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + tg3_phy_toggle_auxctl_smdsp(tp, false); } } @@ -4009,7 +4021,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) tw32(TG3_CPMU_EEE_MODE, tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE); - err = TG3_PHY_AUXCTL_SMDSP_ENABLE(tp); + err = tg3_phy_toggle_auxctl_smdsp(tp, true); if (!err) { u32 err2; @@ -4042,7 +4054,7 @@ static int tg3_phy_autoneg_cfg(struct tg3 *tp, u32 advertise, u32 flowctrl) MII_TG3_DSP_CH34TP2_HIBW01); } - err2 = TG3_PHY_AUXCTL_SMDSP_DISABLE(tp); + err2 = tg3_phy_toggle_auxctl_smdsp(tp, false); if (!err) err = err2; } -- cgit v1.2.3 From 86833f0a57c3d5f3ed8bba465369c15c831d3909 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Sat, 8 Dec 2012 09:04:25 +0000 Subject: ixgbe: only compile ixgbe_debugfs.o when enabled This patch modifies ixgbe_debugfs.c and the Makefile for the ixgbe driver to only compile the file when the config is enabled. This means we can remove the #ifdef inside the ixgbe_debugfs.c file. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/Makefile | 3 ++- drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c | 5 ----- 2 files changed, 2 insertions(+), 6 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile index f3a632bf8d96..687c83d1bdab 100644 --- a/drivers/net/ethernet/intel/ixgbe/Makefile +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -32,7 +32,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o -ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o ixgbe_debugfs.o\ +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ ixgbe_mbx.o ixgbe_x540.o ixgbe_lib.o ixgbe_ptp.o @@ -40,4 +40,5 @@ ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o ixgbe-$(CONFIG_IXGBE_HWMON) += ixgbe_sysfs.o +ixgbe-$(CONFIG_DEBUG_FS) += ixgbe_debugfs.o ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c index 50aa546b8c7a..3504686d3af5 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c @@ -24,9 +24,6 @@ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ - -#ifdef CONFIG_DEBUG_FS - #include #include @@ -277,5 +274,3 @@ void ixgbe_dbg_exit(void) { debugfs_remove_recursive(ixgbe_dbg_root); } - -#endif /* CONFIG_DEBUG_FS */ -- cgit v1.2.3 From 20fc4c42b2bed2dffc8e51f24645603f05b2bcef Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Wed, 5 Dec 2012 07:53:38 +0000 Subject: ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl This patch corrects a bug introduced by commit f3444d8b. The rxmtrl value for the UDP port to timestamp on was moved above the switch statement, but was overwritten to 0 if the ioctl selected one of the V1 filters. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index 1a751c9d09c4..bb9256a1b0a9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -660,11 +660,11 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, break; case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_SYNC_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; break; case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; - tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; break; case HWTSTAMP_FILTER_PTP_V2_EVENT: case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: -- cgit v1.2.3 From d4fc9dc200acc339370e22a0578725e8fb45da0d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Tue, 15 Jan 2013 05:15:10 +0000 Subject: cxgb4: set coalesce parameters on all queues The coalesce parameters was set only on the first queue, which caused interrupt rates to be larger on all the other queues. This patch allows interrupt rates to be reduced for certain workloads and colaesce parameters by 41%. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: steved@us.ibm.com Cc: toml@us.ibm.com Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index f0718e1a8369..c306df7d4568 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -1994,9 +1994,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { const struct port_info *pi = netdev_priv(dev); struct adapter *adap = pi->adapter; - - return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq, - c->rx_coalesce_usecs, c->rx_max_coalesced_frames); + struct sge_rspq *q; + int i; + int r = 0; + + for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++) { + q = &adap->sge.ethrxq[i].rspq; + r = set_rxq_intr_params(adap, q, c->rx_coalesce_usecs, + c->rx_max_coalesced_frames); + if (r) { + dev_err(&dev->dev, "failed to set coalesce %d\n", r); + break; + } + } + return r; } static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) -- cgit v1.2.3 From 13b6d2e6c25dd33f94873b771ad7de3550da5125 Mon Sep 17 00:00:00 2001 From: Nickolai Zeldovich Date: Thu, 17 Jan 2013 07:18:29 +0000 Subject: 3c574_cs: fix operator precedence between << and & The code to print the FIFO size in tc574_config computes it as: 8 << config & Ram_size which evaluates the '<<' first, but the actual intent is to evaluate the '&' first. Add parentheses to enforce desired evaluation order. Signed-off-by: Nickolai Zeldovich Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/3c574_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c index 66df93638085..ffd8de28a76a 100644 --- a/drivers/net/ethernet/3com/3c574_cs.c +++ b/drivers/net/ethernet/3com/3c574_cs.c @@ -432,7 +432,7 @@ static int tc574_config(struct pcmcia_device *link) netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n", cardname, dev->base_addr, dev->irq, dev->dev_addr); netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n", - 8 << config & Ram_size, + 8 << (config & Ram_size), ram_split[(config & Ram_split) >> Ram_split_shift], config & Autoselect ? "autoselect " : ""); -- cgit v1.2.3 From d6fb3be544b46a7611a3373fcaa62b5b0be01888 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 16 Jan 2013 13:36:37 +0000 Subject: net: calxedaxgmac: throw away overrun frames The xgmac driver assumes 1 frame per descriptor. If a frame larger than the descriptor's buffer size is received, the frame will spill over into the next descriptor. So check for received frames that span more than one descriptor and discard them. This prevents a crash if we receive erroneous large packets. Signed-off-by: Rob Herring Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller --- drivers/net/ethernet/calxeda/xgmac.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index b407043ce9b0..f7f02900f650 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -548,6 +548,10 @@ static int desc_get_rx_status(struct xgmac_priv *priv, struct xgmac_dma_desc *p) return -1; } + /* All frames should fit into a single buffer */ + if (!(status & RXDESC_FIRST_SEG) || !(status & RXDESC_LAST_SEG)) + return -1; + /* Check if packet has checksum already */ if ((status & RXDESC_FRAME_TYPE) && (status & RXDESC_EXT_STATUS) && !(ext_status & RXDESC_IP_PAYLOAD_MASK)) -- cgit v1.2.3 From 213815a1e6ae70b9648483b110bc5081795f99e8 Mon Sep 17 00:00:00 2001 From: Yan Burman Date: Thu, 17 Jan 2013 05:30:42 +0000 Subject: net/mlx4_en: Fix bridged vSwitch configuration for non SRIOV mode Commit 5b4c4d36860e "mlx4_en: Allow communication between functions on same host" introduced a regression under which a bridge acting as vSwitch whose uplink is an mlx4 Ethernet device become non-operative in native (non sriov) mode. This happens since broadcast ARP requests sent by VMs were loopback-ed by the HW and hence the bridge learned VM source MACs on both the VM and the uplink ports. The fix is to place the DMAC in the send WQE only under SRIOV/eSwitch configuration or when the device is in selftest. Reviewed-by: Or Gerlitz Signed-off-by: Yan Burman Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_tx.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 2b799f4f1c37..6771b69f40d5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -630,10 +630,15 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) ring->tx_csum++; } - /* Copy dst mac address to wqe */ - ethh = (struct ethhdr *)skb->data; - tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); - tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + if (mlx4_is_mfunc(mdev->dev) || priv->validate_loopback) { + /* Copy dst mac address to wqe. This allows loopback in eSwitch, + * so that VFs and PF can communicate with each other + */ + ethh = (struct ethhdr *)skb->data; + tx_desc->ctrl.srcrb_flags16[0] = get_unaligned((__be16 *)ethh->h_dest); + tx_desc->ctrl.imm = get_unaligned((__be32 *)(ethh->h_dest + 2)); + } + /* Handle LSO (TSO) packets */ if (lso_header_size) { /* Mark opcode as LSO */ -- cgit v1.2.3 From ca4c7b35f75492de7fbf5ee95be07481c348caee Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 17 Jan 2013 05:30:43 +0000 Subject: net/mlx4_core: Set number of msix vectors under SRIOV mode to firmware defaults The lines if (mlx4_is_mfunc(dev)) { nreq = 2; } else { which hard code the number of requested msi-x vectors under multi-function mode to two can be removed completely, since the firmware sets num_eqs and reserved_eqs appropriately Thus, the code line: nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, nreq); is by itself sufficient and correct for all cases. Currently, for mfunc mode num_eqs = 32 and reserved_eqs = 28, hence four vectors will be enabled. This triples (one vector is used for the async events and commands EQ) the horse power provided for processing of incoming packets on netdev RSS scheme, IO initiators/targets commands processing flows, etc. Reviewed-by: Jack Morgenstein Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index e1bafffbc3b1..a6542d75374c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1790,15 +1790,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) int i; if (msi_x) { - /* In multifunction mode each function gets 2 msi-X vectors - * one for data path completions anf the other for asynch events - * or command completions */ - if (mlx4_is_mfunc(dev)) { - nreq = 2; - } else { - nreq = min_t(int, dev->caps.num_eqs - - dev->caps.reserved_eqs, nreq); - } + nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs, + nreq); entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL); if (!entries) -- cgit v1.2.3 From a05948f296ce103989b28a2606e47d2e287c3c89 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 22 Jan 2013 06:33:05 +0000 Subject: netxen: fix off by one bug in netxen_release_tx_buffer() Christoph Paasch found netxen could trigger a BUG in its dismantle phase, in netxen_release_tx_buffer(), using full size TSO packets. cmd_buf->frag_count includes the skb->data part, so the loop must start at index 1 instead of 0, or else we can make an out of bound access to cmd_buff->frag_array[MAX_SKB_FRAGS + 2] Christoph provided the fixes in netxen_map_tx_skb() function. In case of a dma mapping error, its better to clear the dma fields so that we don't try to unmap them again in netxen_release_tx_buffer() Reported-by: Christoph Paasch Signed-off-by: Eric Dumazet Tested-by: Christoph Paasch Cc: Sony Chacko Cc: Rajesh Borundia Signed-off-by: Christoph Paasch Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 2 +- drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index bc165f4d0f65..695667d471a1 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -144,7 +144,7 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter) buffrag->length, PCI_DMA_TODEVICE); buffrag->dma = 0ULL; } - for (j = 0; j < cmd_buf->frag_count; j++) { + for (j = 1; j < cmd_buf->frag_count; j++) { buffrag++; if (buffrag->dma) { pci_unmap_page(adapter->pdev, buffrag->dma, diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 6098fd4adfeb..69e321a65077 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1963,10 +1963,12 @@ unwind: while (--i >= 0) { nf = &pbuf->frag_array[i+1]; pci_unmap_page(pdev, nf->dma, nf->length, PCI_DMA_TODEVICE); + nf->dma = 0ULL; } nf = &pbuf->frag_array[0]; pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE); + nf->dma = 0ULL; out_err: return -ENOMEM; -- cgit v1.2.3 From 5d0feaff230c0abfe4a112e6f09f096ed99e0b2d Mon Sep 17 00:00:00 2001 From: Timo Teräs Date: Mon, 21 Jan 2013 22:30:35 +0000 Subject: r8169: remove the obsolete and incorrect AMD workaround MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was introduced in commit 6dccd16 "r8169: merge with version 6.001.00 of Realtek's r8169 driver". I did not find the version 6.001.00 online, but in 6.002.00 or any later r8169 from Realtek this hunk is no longer present. Also commit 05af214 "r8169: fix Ethernet Hangup for RTL8110SC rev d" claims to have fixed this issue otherwise. The magic compare mask of 0xfffe000 is dubious as it masks parts of the Reserved part, and parts of the VLAN tag. But this does not make much sense as the VLAN tag parts are perfectly valid there. In matter of fact this seems to be triggered with any VLAN tagged packet as RxVlanTag bit is matched. I would suspect 0xfffe0000 was intended to test reserved part only. Finally, this hunk is evil as it can cause more packets to be handled than what was NAPI quota causing net/core/dev.c: net_rx_action(): WARN_ON_ONCE(work > weight) to trigger, and mess up the NAPI state causing device to hang. As result, any system using VLANs and having high receive traffic (so that NAPI poll budget limits rtl_rx) would result in device hang. Signed-off-by: Timo Teräs Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index ed96f309bca8..c28bc318cec6 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6111,13 +6111,6 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } - - /* Work around for AMD plateform. */ - if ((desc->opts2 & cpu_to_le32(0xfffe000)) && - (tp->mac_version == RTL_GIGA_MAC_VER_05)) { - desc->opts2 = 0; - cur_rx++; - } } count = cur_rx - tp->cur_rx; -- cgit v1.2.3 From ce11ff5e5963e441feb591e76278528f876c332d Mon Sep 17 00:00:00 2001 From: françois romieu Date: Thu, 24 Jan 2013 13:30:06 +0000 Subject: r8169: fix vlan tag read ordering. Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: Francois Romieu Spotted-by: Timo Teras Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c28bc318cec6..11702324a071 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -1826,8 +1826,6 @@ static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb) if (opts2 & RxVlanTag) __vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff)); - - desc->opts2 = 0; } static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) @@ -6064,8 +6062,6 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget !(status & (RxRWT | RxFOVF)) && (dev->features & NETIF_F_RXALL)) goto process_pkt; - - rtl8169_mark_to_asic(desc, rx_buf_sz); } else { struct sk_buff *skb; dma_addr_t addr; @@ -6086,16 +6082,14 @@ process_pkt: if (unlikely(rtl8169_fragmented_frame(status))) { dev->stats.rx_dropped++; dev->stats.rx_length_errors++; - rtl8169_mark_to_asic(desc, rx_buf_sz); - continue; + goto release_descriptor; } skb = rtl8169_try_rx_copy(tp->Rx_databuff[entry], tp, pkt_size, addr); - rtl8169_mark_to_asic(desc, rx_buf_sz); if (!skb) { dev->stats.rx_dropped++; - continue; + goto release_descriptor; } rtl8169_rx_csum(skb, status); @@ -6111,6 +6105,10 @@ process_pkt: tp->rx_stats.bytes += pkt_size; u64_stats_update_end(&tp->rx_stats.syncp); } +release_descriptor: + desc->opts2 = 0; + wmb(); + rtl8169_mark_to_asic(desc, rx_buf_sz); } count = cur_rx - tp->cur_rx; -- cgit v1.2.3