From 243fedd5fa4a4a72caae7bde3f0bd0354a256b88 Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Sat, 7 Dec 2013 13:40:48 +0530 Subject: net: emaclite: Remove unnecessary code that enables/disables interrupts on PONG buffers There are no specific interrupts for the PONG buffer on both transmit and receive side, same interrupt is valid for both buffers. So, this patch removes this code. Signed-off-by: Srikanth Thokala Reviewed-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 38 --------------------------- 1 file changed, 38 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 74234a51c851..b2850fdb517e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -163,26 +163,9 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata) __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, drvdata->base_addr + XEL_TSR_OFFSET); - /* Enable the Tx interrupts for the second Buffer if - * configured in HW */ - if (drvdata->tx_ping_pong != 0) { - reg_data = __raw_readl(drvdata->base_addr + - XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); - __raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK, - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - } - /* Enable the Rx interrupts for the first buffer */ __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET); - /* Enable the Rx interrupts for the second Buffer if - * configured in HW */ - if (drvdata->rx_ping_pong != 0) { - __raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + - XEL_BUFFER_OFFSET + XEL_RSR_OFFSET); - } - /* Enable the Global Interrupt Enable */ __raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET); } @@ -206,31 +189,10 @@ static void xemaclite_disable_interrupts(struct net_local *drvdata) __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), drvdata->base_addr + XEL_TSR_OFFSET); - /* Disable the Tx interrupts for the second Buffer - * if configured in HW */ - if (drvdata->tx_ping_pong != 0) { - reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - __raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK), - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_TSR_OFFSET); - } - /* Disable the Rx interrupts for the first buffer */ reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET); __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), drvdata->base_addr + XEL_RSR_OFFSET); - - /* Disable the Rx interrupts for the second buffer - * if configured in HW */ - if (drvdata->rx_ping_pong != 0) { - - reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); - __raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK), - drvdata->base_addr + XEL_BUFFER_OFFSET + - XEL_RSR_OFFSET); - } } /** -- cgit v1.2.3 From ec21b6b404dd850a23952ee3b871ff676c0703fa Mon Sep 17 00:00:00 2001 From: Srikanth Thokala Date: Sat, 7 Dec 2013 13:40:49 +0530 Subject: net: emaclite: add barriers to support Xilinx Zynq platform This patch adds barriers at appropriate places to ensure the driver works on Xilinx Zynq ARM-based SoC platform. Signed-off-by: Srikanth Thokala Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index b2850fdb517e..fefb8cd5eb65 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -220,6 +220,13 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, *to_u16_ptr++ = *from_u16_ptr++; *to_u16_ptr++ = *from_u16_ptr++; + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); + /* Output a word */ *to_u32_ptr++ = align_buffer; } @@ -235,6 +242,12 @@ static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, for (; length > 0; length--) *to_u8_ptr++ = *from_u8_ptr++; + /* This barrier resolves occasional issues seen around + * cases where the data is not properly flushed out + * from the processor store buffers to the destination + * memory locations. + */ + wmb(); *to_u32_ptr = align_buffer; } } -- cgit v1.2.3 From e9c56f8d2f851fb6d6ce6794c0f5463b862a878e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 10 Dec 2013 19:40:43 +0100 Subject: net: allwinner: emac: Add missing free_irq The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by: Maxime Ripard Cc: stable@vger.kernel.org # 3.11+ Signed-off-by: David S. Miller --- drivers/net/ethernet/allwinner/sun4i-emac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 50b853a79d77..46dfb1378c17 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -717,8 +717,7 @@ static int emac_open(struct net_device *dev) if (netif_msg_ifup(db)) dev_dbg(db->dev, "enabling %s\n", dev->name); - if (devm_request_irq(db->dev, dev->irq, &emac_interrupt, - 0, dev->name, dev)) + if (request_irq(dev->irq, &emac_interrupt, 0, dev->name, dev)) return -EAGAIN; /* Initialize EMAC board */ @@ -774,6 +773,8 @@ static int emac_stop(struct net_device *ndev) emac_shutdown(ndev); + free_irq(ndev->irq, ndev); + return 0; } -- cgit v1.2.3 From 388d3335575f4c056dcf7138a30f1454e2145cd8 Mon Sep 17 00:00:00 2001 From: Nat Gurumoorthy Date: Mon, 9 Dec 2013 10:43:21 -0800 Subject: tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0 The new tg3 driver leaves REG_BASE_ADDR (PCI config offset 120) uninitialized. From power on reset this register may have garbage in it. The Register Base Address register defines the device local address of a register. The data pointed to by this location is read or written using the Register Data register (PCI config offset 128). When REG_BASE_ADDR has garbage any read or write of Register Data Register (PCI 128) will cause the PCI bus to lock up. The TCO watchdog will fire and bring down the system. Signed-off-by: Nat Gurumoorthy Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 472305cdff4f..f3dd93b4aeaa 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -16503,6 +16503,9 @@ static int tg3_get_invariants(struct tg3 *tp, const struct pci_device_id *ent) /* Clear this out for sanity. */ tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); + /* Clear TG3PCI_REG_BASE_ADDR to prevent hangs. */ + tw32(TG3PCI_REG_BASE_ADDR, 0); + pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE, &pci_state_reg); if ((pci_state_reg & PCISTATE_CONV_PCI_MODE) == 0 && -- cgit v1.2.3 From 3f823c15d53dc78b50d6f561caf36e8109df1193 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 11 Dec 2013 13:04:27 -0800 Subject: net: smc91x: Fix device tree based configuration so it's usable Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre Cc: Mark Rutland Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Nishanth Menon Signed-off-by: Tony Lindgren Signed-off-by: David S. Miller --- .../devicetree/bindings/net/smsc-lan91c111.txt | 4 ++ drivers/net/ethernet/smsc/smc91x.c | 45 +++++++++++++++++----- 2 files changed, 39 insertions(+), 10 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt index 953049b4248a..5a41a8658daa 100644 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 0c9b5d94154f..8bf29eb4a5a0 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -82,6 +82,7 @@ static const char version[] = #include #include #include +#include #include #include @@ -2184,6 +2185,15 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * } } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id smc91x_match[] = { + { .compatible = "smsc,lan91c94", }, + { .compatible = "smsc,lan91c111", }, + {}, +}; +MODULE_DEVICE_TABLE(of, smc91x_match); +#endif + /* * smc_init(void) * Input parameters: @@ -2198,6 +2208,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev); + const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; struct resource *res, *ires; @@ -2217,11 +2228,34 @@ static int smc_drv_probe(struct platform_device *pdev) */ lp = netdev_priv(ndev); + lp->cfg.flags = 0; if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); - } else { + } + +#if IS_BUILTIN(CONFIG_OF) + match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev); + if (match) { + struct device_node *np = pdev->dev.of_node; + u32 val; + + /* Combination of IO widths supported, default to 16-bit */ + if (!of_property_read_u32(np, "reg-io-width", &val)) { + if (val & 1) + lp->cfg.flags |= SMC91X_USE_8BIT; + if ((val == 0) || (val & 2)) + lp->cfg.flags |= SMC91X_USE_16BIT; + if (val & 4) + lp->cfg.flags |= SMC91X_USE_32BIT; + } else { + lp->cfg.flags |= SMC91X_USE_16BIT; + } + } +#endif + + if (!pd && !match) { lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0; @@ -2370,15 +2404,6 @@ static int smc_drv_resume(struct device *dev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id smc91x_match[] = { - { .compatible = "smsc,lan91c94", }, - { .compatible = "smsc,lan91c111", }, - {}, -}; -MODULE_DEVICE_TABLE(of, smc91x_match); -#endif - static struct dev_pm_ops smc_drv_pm_ops = { .suspend = smc_drv_suspend, .resume = smc_drv_resume, -- cgit v1.2.3 From 99023e90fe5c147ea0665bda86764ea44f08a622 Mon Sep 17 00:00:00 2001 From: Matthew Whitehead Date: Wed, 11 Dec 2013 17:00:59 -0500 Subject: 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature Removed the shared ei_debug variable. Replaced it by adding u32 msg_enable to the private struct ei_device. Now each 8390 ethernet instance has a per-device logging variable. Changed older style printk() calls to more canonical forms. Tested on: ne, ne2k-pci, smc-ultra, and wd hardware. V4.0 - Substituted pr_info() and pr_debug() for printk() KERN_INFO and KERN_DEBUG V3.0 - Checked for cases where pr_cont() was most appropriate choice. - Changed module parameter from 'debug' to 'msg_enable' because debug was no longer the best description. V2.0 - Changed netif_msg_(drv|probe|ifdown|rx_err|tx_err|tx_queued|intr|rx_status|hw) to netif_(dbg|info|warn|err) where possible. Signed-off-by: Matthew Whitehead Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/8390.h | 7 +- drivers/net/ethernet/8390/apne.c | 62 ++++++++++-------- drivers/net/ethernet/8390/ax88796.c | 22 ++++++- drivers/net/ethernet/8390/axnet_cs.c | 119 ++++++++++++++++------------------ drivers/net/ethernet/8390/etherh.c | 51 +++++++++------ drivers/net/ethernet/8390/hydra.c | 11 +++- drivers/net/ethernet/8390/lib8390.c | 77 ++++++++++++---------- drivers/net/ethernet/8390/mac8390.c | 19 ++++-- drivers/net/ethernet/8390/mcf8390.c | 8 ++- drivers/net/ethernet/8390/ne.c | 96 +++++++++++++++------------ drivers/net/ethernet/8390/ne2k-pci.c | 54 ++++++++++----- drivers/net/ethernet/8390/pcnet_cs.c | 62 ++++++++++-------- drivers/net/ethernet/8390/smc-ultra.c | 48 ++++++++------ drivers/net/ethernet/8390/stnic.c | 28 +++++--- drivers/net/ethernet/8390/wd.c | 42 +++++++----- drivers/net/ethernet/8390/zorro8390.c | 22 +++++-- 16 files changed, 426 insertions(+), 302 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/8390/8390.h b/drivers/net/ethernet/8390/8390.h index 2923c51bb351..3e2f2c2e7b58 100644 --- a/drivers/net/ethernet/8390/8390.h +++ b/drivers/net/ethernet/8390/8390.h @@ -21,12 +21,6 @@ struct e8390_pkt_hdr { unsigned short count; /* header + packet length in bytes */ }; -#ifdef notdef -extern int ei_debug; -#else -#define ei_debug 1 -#endif - #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev); void eip_poll(struct net_device *dev); @@ -99,6 +93,7 @@ struct ei_device { u32 *reg_offset; /* Register mapping table */ spinlock_t page_lock; /* Page register locks */ unsigned long priv; /* Private field to store bus IDs etc. */ + u32 msg_enable; /* debug message level */ #ifdef AX88796_PLATFORM unsigned char rxcr_base; /* default value for RXCR */ #endif diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 912ed7a5f33a..811fa5d5c697 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -116,9 +116,15 @@ static const char version[] = static int apne_owned; /* signal if card already owned */ +static u32 apne_msg_enable; +module_param_named(msg_enable, apne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + struct net_device * __init apne_probe(int unit) { struct net_device *dev; + struct ei_device *ei_local; + #ifndef MANUAL_CONFIG char tuple[8]; #endif @@ -133,11 +139,11 @@ struct net_device * __init apne_probe(int unit) if ( !(AMIGAHW_PRESENT(PCMCIA)) ) return ERR_PTR(-ENODEV); - printk("Looking for PCMCIA ethernet card : "); + pr_info("Looking for PCMCIA ethernet card : "); /* check if a card is inserted */ if (!(PCMCIA_INSERTED)) { - printk("NO PCMCIA card inserted\n"); + pr_cont("NO PCMCIA card inserted\n"); return ERR_PTR(-ENODEV); } @@ -148,6 +154,8 @@ struct net_device * __init apne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); } + ei_local = netdev_priv(dev); + ei_local->msg_enable = apne_msg_enable; /* disable pcmcia irq for readtuple */ pcmcia_disable_irq(); @@ -155,14 +163,14 @@ struct net_device * __init apne_probe(int unit) #ifndef MANUAL_CONFIG if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) || (tuple[2] != CISTPL_FUNCID_NETWORK)) { - printk("not an ethernet card\n"); + pr_cont("not an ethernet card\n"); /* XXX: shouldn't we re-enable irq here? */ free_netdev(dev); return ERR_PTR(-ENODEV); } #endif - printk("ethernet PCMCIA card inserted\n"); + pr_cont("ethernet PCMCIA card inserted\n"); if (!init_pcmcia()) { /* XXX: shouldn't we re-enable irq here? */ @@ -204,11 +212,12 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) int neX000, ctron; #endif static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug && version_printed++ == 0) - printk(version); + if ((apne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); - printk("PCMCIA NE*000 ethercard probe"); + netdev_info(dev, "PCMCIA NE*000 ethercard probe"); /* Reset card. Who knows what dain-bramaged state it was left in. */ { unsigned long reset_start_time = jiffies; @@ -217,7 +226,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(" not found (no reset ack).\n"); + pr_cont(" not found (no reset ack).\n"); return -ENODEV; } @@ -288,7 +297,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) start_page = 0x01; stop_page = (wordlength == 2) ? 0x40 : 0x20; } else { - printk(" not found.\n"); + pr_cont(" not found.\n"); return -ENXIO; } @@ -320,9 +329,9 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = SA_prom[i]; - printk(" %pM\n", dev->dev_addr); + pr_cont(" %pM\n", dev->dev_addr); - printk("%s: %s found.\n", dev->name, name); + netdev_info(dev, "%s found.\n", name); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -352,10 +361,11 @@ static void apne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); init_pcmcia(); - if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -365,8 +375,8 @@ apne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk("%s: ne_reset_8390() did not complete.\n", dev->name); - break; + netdev_err(dev, "ne_reset_8390() did not complete.\n"); + break; } outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */ } @@ -386,9 +396,9 @@ apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pa /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } @@ -433,9 +443,9 @@ apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int rin /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -481,9 +491,9 @@ apne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d][intr:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); + netdev_err(dev, "DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d][intr:%d]\n", + ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -513,7 +523,7 @@ apne_block_output(struct net_device *dev, int count, while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk("%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); apne_reset_8390(dev); NS8390_init(dev,1); break; @@ -536,8 +546,8 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) pcmcia_ack_int(pcmcia_intreq); return IRQ_NONE; } - if (ei_debug > 3) - printk("pcmcia intreq = %x\n", pcmcia_intreq); + if (apne_msg_enable & NETIF_MSG_INTR) + pr_debug("pcmcia intreq = %x\n", pcmcia_intreq); pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */ ei_interrupt(irq, dev_id); pcmcia_ack_int(pcmcia_get_intreq()); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 36fa577970bb..8ed5b34d7553 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -78,6 +78,8 @@ static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electron #define AX_GPOC_PPDSET BIT(6) +static u32 ax_msg_enable; + /* device private data */ struct ax_device { @@ -147,8 +149,7 @@ static void ax_reset_8390(struct net_device *dev) unsigned long reset_start_time = jiffies; void __iomem *addr = (void __iomem *)dev->base_addr; - if (ei_debug > 1) - netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -496,12 +497,28 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return phy_ethtool_sset(phy_dev, cmd); } +static u32 ax_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void ax_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops ax_ethtool_ops = { .get_drvinfo = ax_get_drvinfo, .get_settings = ax_get_settings, .set_settings = ax_set_settings, .get_link = ethtool_op_get_link, .get_ts_info = ethtool_op_get_ts_info, + .get_msglevel = ax_get_msglevel, + .set_msglevel = ax_set_msglevel, }; #ifdef CONFIG_AX88796_93CX6 @@ -763,6 +780,7 @@ static int ax_init_dev(struct net_device *dev) ei_local->block_output = &ax_block_output; ei_local->get_8390_hdr = &ax_get_8390_hdr; ei_local->priv = 0; + ei_local->msg_enable = ax_msg_enable; dev->netdev_ops = &ax_netdev_ops; dev->ethtool_ops = &ax_ethtool_ops; diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index d801c1410fb0..5698a4c85d8e 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -105,6 +105,7 @@ static void AX88190_init(struct net_device *dev, int startp); static int ax_open(struct net_device *dev); static int ax_close(struct net_device *dev); static irqreturn_t ax_interrupt(int irq, void *dev_id); +static u32 axnet_msg_enable; /*====================================================================*/ @@ -152,6 +153,7 @@ static int axnet_probe(struct pcmcia_device *link) return -ENOMEM; ei_local = netdev_priv(dev); + ei_local->msg_enable = axnet_msg_enable; spin_lock_init(&ei_local->page_lock); info = PRIV(dev); @@ -650,11 +652,12 @@ static void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { unsigned int nic_base = dev->base_addr; + struct ei_device *ei_local = netdev_priv(dev); int xfer_count = count; char *buf = skb->data; - if ((ei_debug > 4) && (count != 4)) - pr_debug("%s: [bi=%d]\n", dev->name, count+4); + if ((netif_msg_rx_status(ei_local)) && (count != 4)) + netdev_dbg(dev, "[bi=%d]\n", count+4); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); @@ -810,11 +813,6 @@ module_pcmcia_driver(axnet_cs_driver); #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -925,11 +923,10 @@ static void axnet_tx_timeout(struct net_device *dev) isr = inb(e8390_base+EN0_ISR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - netdev_printk(KERN_DEBUG, dev, - "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", - txsr, isr, tickssofar); + netdev_dbg(dev, "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", + txsr, isr, tickssofar); if (!isr && !dev->stats.tx_packets) { @@ -998,29 +995,30 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", - ei_local->tx2, ei_local->lasttx, - ei_local->txing); + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx2 > 0) + netdev_dbg(dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + ei_local->tx2, ei_local->lasttx, + ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - netdev_printk(KERN_DEBUG, dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", - ei_local->tx1, ei_local->lasttx, - ei_local->txing); + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx1 > 0) + netdev_dbg(dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + ei_local->tx1, ei_local->lasttx, + ei_local->txing); } else { /* We should never get here. */ - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, - ei_local->lasttx); + netif_dbg(ei_local, tx_err, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, + ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -1124,10 +1122,9 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } - - if (ei_debug > 3) - netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", - inb_p(e8390_base + EN0_ISR)); + + netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", + inb_p(e8390_base + EN0_ISR)); outb_p(0x00, e8390_base + EN0_ISR); ei_local->irqlock = 1; @@ -1137,9 +1134,8 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ++nr_serviced < MAX_SERVICE) { if (!netif_running(dev) || (interrupts == 0xff)) { - if (ei_debug > 1) - netdev_warn(dev, - "interrupt from stopped card\n"); + netif_warn(ei_local, intr, dev, + "interrupt from stopped card\n"); outb_p(interrupts, e8390_base + EN0_ISR); interrupts = 0; break; @@ -1175,14 +1171,15 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && ei_debug > 3) + if (interrupts && (netif_msg_intr(ei_local))) { handled = 1; if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ - if(interrupts!=0xFF) - netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", + if (interrupts != 0xFF) + netdev_warn(dev, + "Too much work at interrupt, status %#2.2x\n", interrupts); outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ } else { @@ -1221,8 +1218,7 @@ static void ei_tx_err(struct net_device *dev) unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); #ifdef VERBOSE_ERROR_DUMP - netdev_printk(KERN_DEBUG, dev, - "transmitter error (%#2x):", txsr); + netdev_dbg(dev, "transmitter error (%#2x):", txsr); if (txsr & ENTSR_ABT) pr_cont(" excess-collisions"); if (txsr & ENTSR_ND) @@ -1287,9 +1283,9 @@ static void ei_tx_intr(struct net_device *dev) else if (ei_local->tx2 < 0) { if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx2); + netdev_err(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx2); ei_local->tx2 = 0; if (ei_local->tx1 > 0) { @@ -1366,9 +1362,11 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", - this_frame, ei_local->current_page); + if ((netif_msg_rx_err(ei_local)) && + this_frame != ei_local->current_page && + (this_frame != 0x0 || rxing_page != 0xFF)) + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ break; /* Done for now */ @@ -1383,11 +1381,10 @@ static void ei_receive(struct net_device *dev) if (pkt_len < 60 || pkt_len > 1518) { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + netif_err(ei_local, rx_err, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } @@ -1398,10 +1395,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + netif_err(ei_local, rx_err, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } @@ -1420,11 +1416,10 @@ static void ei_receive(struct net_device *dev) } else { - if (ei_debug) - netdev_printk(KERN_DEBUG, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + netif_err(ei_local, rx_err, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -1461,6 +1456,7 @@ static void ei_rx_overrun(struct net_device *dev) axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; + struct ei_device *ei_local = netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -1468,9 +1464,8 @@ static void ei_rx_overrun(struct net_device *dev) */ was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - if (ei_debug > 1) - netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); + + netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index 78c6fb4b1143..b15e482a7c63 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -56,9 +56,6 @@ #define ei_inb_p(_p) readb((void __iomem *)_p) #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) -#define NET_DEBUG 0 -#define DEBUG_INIT 2 - #define DRV_NAME "etherh" #define DRV_VERSION "1.11" @@ -67,7 +64,7 @@ static char version[] __initdata = #include "lib8390.c" -static unsigned int net_debug = NET_DEBUG; +static u32 etherh_msg_enable; struct etherh_priv { void __iomem *ioc_fast; @@ -317,9 +314,9 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -361,8 +358,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_ERR "%s: timeout waiting for TX RDC\n", - dev->name); + netdev_warn(dev, "timeout waiting for TX RDC\n"); etherh_reset (dev); __NS8390_init (dev, 1); break; @@ -383,9 +379,9 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -423,9 +419,9 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p void __iomem *dma_base, *addr; if (ei_local->dmaing) { - printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " - " DMAstat %d irqlock %d\n", dev->name, - ei_local->dmaing, ei_local->irqlock); + netdev_err(dev, "DMAing conflict in etherh_get_header: " + " DMAstat %d irqlock %d\n", + ei_local->dmaing, ei_local->irqlock); return; } @@ -513,8 +509,8 @@ static void __init etherh_banner(void) { static int version_printed; - if (net_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version); + if ((etherh_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + pr_info("%s", version); } /* @@ -625,11 +621,27 @@ static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return 0; } +static u32 etherh_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void etherh_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops etherh_ethtool_ops = { .get_settings = etherh_get_settings, .set_settings = etherh_set_settings, .get_drvinfo = etherh_get_drvinfo, .get_ts_info = ethtool_op_get_ts_info, + .get_msglevel = etherh_get_msglevel, + .set_msglevel = etherh_set_msglevel, }; static const struct net_device_ops etherh_netdev_ops = { @@ -746,6 +758,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) ei_local->block_output = etherh_block_output; ei_local->get_8390_hdr = etherh_get_header; ei_local->interface_num = 0; + ei_local->msg_enable = etherh_msg_enable; etherh_reset(dev); __NS8390_init(dev, 0); @@ -754,8 +767,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) if (ret) goto free; - printk(KERN_INFO "%s: %s in slot %d, %pM\n", - dev->name, data->name, ec->slot_no, dev->dev_addr); + netdev_info(dev, "%s in slot %d, %pM\n", + data->name, ec->slot_no, dev->dev_addr); ecard_set_drvdata(ec, dev); diff --git a/drivers/net/ethernet/8390/hydra.c b/drivers/net/ethernet/8390/hydra.c index fb3dd4399cf3..d8b86c83dd15 100644 --- a/drivers/net/ethernet/8390/hydra.c +++ b/drivers/net/ethernet/8390/hydra.c @@ -66,6 +66,7 @@ static void hydra_block_input(struct net_device *dev, int count, static void hydra_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void hydra_remove_one(struct zorro_dev *z); +static u32 hydra_msg_enable; static struct zorro_device_id hydra_zorro_tbl[] = { { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, @@ -119,6 +120,7 @@ static int hydra_init(struct zorro_dev *z) int start_page, stop_page; int j; int err; + struct ei_device *ei_local; static u32 hydra_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, @@ -137,6 +139,8 @@ static int hydra_init(struct zorro_dev *z) start_page = NESM_START_PG; stop_page = NESM_STOP_PG; + ei_local = netdev_priv(dev); + ei_local->msg_enable = hydra_msg_enable; dev->base_addr = ioaddr; dev->irq = IRQ_AMIGA_PORTS; @@ -187,15 +191,16 @@ static int hydra_open(struct net_device *dev) static int hydra_close(struct net_device *dev) { - if (ei_debug > 1) - printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); __ei_close(dev); return 0; } static void hydra_reset_8390(struct net_device *dev) { - printk(KERN_INFO "Hydra hw reset not there\n"); + netdev_info(dev, "Hydra hw reset not there\n"); } static void hydra_get_8390_hdr(struct net_device *dev, diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index b329f5c0d62b..d2cd80444ade 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -99,11 +99,6 @@ #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef ei_debug -int ei_debug = 1; -#endif - /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -116,6 +111,11 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, static void do_set_multicast_list(struct net_device *dev); static void __NS8390_init(struct net_device *dev, int startp); +static unsigned version_printed; +static u32 msg_enable; +module_param(msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + /* * SMP and the 8390 setup. * @@ -345,19 +345,23 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, if (ei_local->tx1 == 0) { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if (ei_debug && ei_local->tx2 > 0) - netdev_dbg(dev, "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx2 > 0) + netdev_dbg(dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", ei_local->tx2, ei_local->lasttx, ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if (ei_debug && ei_local->tx1 > 0) - netdev_dbg(dev, "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + if ((netif_msg_tx_queued(ei_local)) && + ei_local->tx1 > 0) + netdev_dbg(dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", ei_local->tx1, ei_local->lasttx, ei_local->txing); } else { /* We should never get here. */ - if (ei_debug) - netdev_dbg(dev, "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, ei_local->lasttx); + netif_dbg(ei_local, tx_err, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -388,7 +392,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, } else ei_local->txqueue++; - if (ei_local->tx1 && ei_local->tx2) + if (ei_local->tx1 && ei_local->tx2) netif_stop_queue(dev); else netif_start_queue(dev); @@ -445,9 +449,8 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) /* Change to page 0 and read the intr status reg. */ ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - if (ei_debug > 3) - netdev_dbg(dev, "interrupt(isr=%#2.2x)\n", - ei_inb_p(e8390_base + EN0_ISR)); + netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", + ei_inb_p(e8390_base + EN0_ISR)); /* !!Assumption!! -- we stay in page 0. Don't break this. */ while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 && @@ -485,7 +488,7 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); } - if (interrupts && ei_debug) { + if (interrupts && (netif_msg_intr(ei_local))) { ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ @@ -676,10 +679,11 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if (ei_debug > 0 && + if ((netif_msg_rx_status(ei_local)) && this_frame != ei_local->current_page && (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + netdev_err(dev, + "mismatched read page pointers %2x vs %2x\n", this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ @@ -707,10 +711,10 @@ static void ei_receive(struct net_device *dev) } if (pkt_len < 60 || pkt_len > 1518) { - if (ei_debug) - netdev_dbg(dev, "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + netif_dbg(ei_local, rx_status, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -718,9 +722,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - if (ei_debug > 1) - netdev_dbg(dev, "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + netif_err(ei_local, rx_err, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } else { @@ -736,10 +740,10 @@ static void ei_receive(struct net_device *dev) dev->stats.multicast++; } } else { - if (ei_debug) - netdev_dbg(dev, "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + netif_err(ei_local, rx_err, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -789,8 +793,7 @@ static void ei_rx_overrun(struct net_device *dev) was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS; ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - if (ei_debug > 1) - netdev_dbg(dev, "Receiver overrun\n"); + netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* @@ -965,8 +968,9 @@ static void __ei_set_multicast_list(struct net_device *dev) static void ethdev_setup(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk(version); + + if ((msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + pr_info("%s", version); ether_setup(dev); @@ -1035,9 +1039,10 @@ static void __NS8390_init(struct net_device *dev, int startp) ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ for (i = 0; i < 6; i++) { ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if (ei_debug > 1 && + if ((netif_msg_probe(ei_local)) && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i)) != dev->dev_addr[i]) - netdev_err(dev, "Hw. address read/write mismap %d\n", i); + netdev_err(dev, + "Hw. address read/write mismap %d\n", i); } ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 88ccc8b14f0a..90e825e8abfe 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -167,6 +167,7 @@ static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); +static u32 mac8390_msg_enable; static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) { @@ -402,6 +403,7 @@ struct net_device * __init mac8390_probe(int unit) struct net_device *dev; struct nubus_dev *ndev = NULL; int err = -ENODEV; + struct ei_device *ei_local; static unsigned int slots; @@ -440,6 +442,10 @@ struct net_device * __init mac8390_probe(int unit) if (!ndev) goto out; + + ei_local = netdev_priv(dev); + ei_local->msg_enable = mac8390_msg_enable; + err = register_netdev(dev); if (err) goto out; @@ -660,19 +666,22 @@ static int mac8390_close(struct net_device *dev) static void mac8390_no_reset(struct net_device *dev) { + struct ei_device *ei_local = netdev_priv(dev); + ei_status.txing = 0; - if (ei_debug > 1) - pr_info("reset not supported\n"); + netif_info(ei_local, hw, dev, "reset not supported\n"); } static void interlan_reset(struct net_device *dev) { unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq)); - if (ei_debug > 1) - pr_info("Need to reset the NS8390 t=%lu...", jiffies); + struct ei_device *ei_local = netdev_priv(dev); + + netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...", + jiffies); ei_status.txing = 0; target[0xC0000] = 0; - if (ei_debug > 1) + if (netif_msg_hw(ei_local)) pr_cont("reset complete\n"); } diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index 230efd6fa5d5..df0ffca91c1c 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -39,6 +39,7 @@ static const char version[] = #define NESM_START_PG 0x40 /* First page of TX buffer */ #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ +static u32 mcf8390_msg_enable; #ifdef NE2000_ODDOFFSET /* @@ -153,9 +154,9 @@ static void mcf8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; u32 addr = dev->base_addr; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -288,7 +289,7 @@ static void mcf8390_block_output(struct net_device *dev, int count, dma_start = jiffies; while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_err(dev, "timeout waiting for Tx RDC\n"); + netdev_warn(dev, "timeout waiting for Tx RDC\n"); mcf8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -437,6 +438,7 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev); ei_local = netdev_priv(dev); + ei_local->msg_enable = mcf8390_msg_enable; dev->irq = irq->start; dev->base_addr = mem->start; diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index b2e840513735..58eaa8f34942 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -71,14 +71,17 @@ static struct platform_device *pdev_ne[MAX_NE_CARDS]; static int io[MAX_NE_CARDS]; static int irq[MAX_NE_CARDS]; static int bad[MAX_NE_CARDS]; +static u32 ne_msg_enable; #ifdef MODULE module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(bad, int, NULL, 0); +module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); MODULE_PARM_DESC(irq, "IRQ number(s)"); MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); #endif /* MODULE */ @@ -214,8 +217,8 @@ static int __init do_ne_probe(struct net_device *dev) if (base_addr > 0x1ff) { /* Check a single specified location. */ int ret = ne_probe1(dev, base_addr); if (ret) - printk(KERN_WARNING "ne.c: No NE*000 card found at " - "i/o = %#lx\n", base_addr); + netdev_warn(dev, "ne.c: No NE*000 card found at " + "i/o = %#lx\n", base_addr); return ret; } else if (base_addr != 0) /* Don't probe at all. */ @@ -264,11 +267,14 @@ static int __init ne_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) isapnp_clone_list[i].driver_data, - dev->base_addr, dev->irq); + netdev_info(dev, + "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) isapnp_clone_list[i].driver_data, + dev->base_addr, dev->irq); if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); + netdev_err(dev, + "ne.c: Probe of ISAPnP card at %#lx failed.\n", + dev->base_addr); pnp_device_detach(idev); return -ENXIO; } @@ -293,6 +299,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) int neX000, ctron, copam, bad_card; int reg0, ret; static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -319,10 +326,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } } - if (ei_debug && version_printed++ == 0) - printk(KERN_INFO "%s%s", version1, version2); + if ((ne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, "%s%s", version1, version2); - printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); + netdev_info(dev, "NE*000 ethercard probe at %#3lx:", ioaddr); /* A user with a poor card that fails to ack the reset, or that does not have a valid 0x57,0x57 signature can still use this @@ -343,10 +350,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { if (bad_card) { - printk(" (warning: no reset ack)"); + pr_cont(" (warning: no reset ack)"); break; } else { - printk(" not found (no reset ack).\n"); + pr_cont(" not found (no reset ack).\n"); ret = -ENODEV; goto err_out; } @@ -454,13 +461,13 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (bad_clone_list[i].name8 == NULL) { - printk(" not found (invalid signature %2.2x %2.2x).\n", + pr_cont(" not found (invalid signature %2.2x %2.2x).\n", SA_prom[14], SA_prom[15]); ret = -ENXIO; goto err_out; } #else - printk(" not found.\n"); + pr_cont(" not found.\n"); ret = -ENXIO; goto err_out; #endif @@ -476,15 +483,15 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) mdelay(10); /* wait 10ms for interrupt to propagate */ outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */ dev->irq = probe_irq_off(cookie); - if (ei_debug > 2) - printk(" autoirq is %d\n", dev->irq); + if (netif_msg_probe(ei_local)) + pr_cont(" autoirq is %d", dev->irq); } else if (dev->irq == 2) /* Fixup for users that don't know that IRQ 2 is really IRQ 9, or don't know which one to set. */ dev->irq = 9; if (! dev->irq) { - printk(" failed to detect IRQ line.\n"); + pr_cont(" failed to detect IRQ line.\n"); ret = -EAGAIN; goto err_out; } @@ -493,7 +500,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) share and the board will usually be enabled. */ ret = request_irq(dev->irq, eip_interrupt, 0, name, dev); if (ret) { - printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); + pr_cont(" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); goto err_out; } @@ -512,7 +519,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } #endif - printk("%pM\n", dev->dev_addr); + pr_cont("%pM\n", dev->dev_addr); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -536,11 +543,12 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) dev->netdev_ops = &eip_netdev_ops; NS8390p_init(dev, 0); + ei_local->msg_enable = ne_msg_enable; ret = register_netdev(dev); if (ret) goto out_irq; - printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n", - dev->name, name, ioaddr, dev->irq); + netdev_info(dev, "%s found at %#lx, using IRQ %d.\n", + name, ioaddr, dev->irq); return 0; out_irq: @@ -556,9 +564,9 @@ err_out: static void ne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -569,7 +577,7 @@ static void ne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name); + netdev_err(dev, "ne_reset_8390() did not complete.\n"); break; } outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -587,9 +595,9 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, i if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -621,6 +629,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk { #ifdef NE_SANITY_CHECK int xfer_count = count; + struct ei_device *ei_local = netdev_priv(dev); #endif int nic_base = dev->base_addr; char *buf = skb->data; @@ -628,9 +637,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d].\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -660,7 +669,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk this message you either 1) have a slightly incompatible clone or 2) have noise/speed problems with your bus. */ - if (ei_debug > 1) + if (netif_msg_rx_status(ei_local)) { /* DMA termination address check... */ int addr, tries = 20; @@ -674,9 +683,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk break; } while (--tries > 0); if (tries <= 0) - printk(KERN_WARNING "%s: RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, ring_offset + xfer_count, addr); + netdev_warn(dev, "RX transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -690,6 +699,7 @@ static void ne_block_output(struct net_device *dev, int count, unsigned long dma_start; #ifdef NE_SANITY_CHECK int retries = 0; + struct ei_device *ei_local = netdev_priv(dev); #endif /* Round the count up for word writes. Do we need to do this? @@ -702,9 +712,9 @@ static void ne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk(KERN_EMERG "%s: DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -751,7 +761,7 @@ retry: /* This was for the ALPHA version only, but enough people have been encountering problems so it is still here. */ - if (ei_debug > 1) + if (netif_msg_tx_queued(ei_local)) { /* DMA termination address check... */ int addr, tries = 20; @@ -765,9 +775,9 @@ retry: if (tries <= 0) { - printk(KERN_WARNING "%s: Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - dev->name, (start_page << 8) + count, addr); + netdev_warn(dev, "Tx packet transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -776,7 +786,7 @@ retry: while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); ne_reset_8390(dev); NS8390p_init(dev, 1); break; @@ -936,8 +946,8 @@ int __init init_module(void) retval = platform_driver_probe(&ne_driver, ne_drv_probe); if (retval) { if (io[0] == 0) - printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\"" - " value(s) for ISA cards.\n"); + pr_notice("ne.c: You must supply \"io=0xNNN\"" + " value(s) for ISA cards.\n"); ne_loop_rm_unreg(1); return retval; } diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index fc14a85e4d5f..f395c967262e 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -33,8 +33,6 @@ /* The user-configurable values. These may be modified when a driver module is loaded.*/ -static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ - #define MAX_UNITS 8 /* More are supported, limit only on options */ /* Used to pass the full-duplex flag, etc. */ static int full_duplex[MAX_UNITS]; @@ -60,6 +58,8 @@ static int options[MAX_UNITS]; #include "8390.h" +static u32 ne2k_msg_enable; + /* These identify the driver base version and may not be removed. */ static const char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE @@ -76,10 +76,10 @@ MODULE_AUTHOR("Donald Becker / Paul Gortmaker"); MODULE_DESCRIPTION("PCI NE2000 clone driver"); MODULE_LICENSE("GPL"); -module_param(debug, int, 0); +module_param_named(msg_enable, ne2k_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(debug, "debug level (1-2)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_PARM_DESC(options, "Bit 5: full duplex"); MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); @@ -226,6 +226,7 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, static unsigned int fnd_cnt; long ioaddr; int flags = pci_clone_list[chip_idx].flags; + struct ei_device *ei_local; /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -280,6 +281,8 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, goto err_out_free_res; } dev->netdev_ops = &ne2k_netdev_ops; + ei_local = netdev_priv(dev); + ei_local->msg_enable = ne2k_msg_enable; SET_NETDEV_DEV(dev, &pdev->dev); @@ -379,9 +382,9 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (i) goto err_out_free_netdev; - printk("%s: %s found at %#lx, IRQ %d, %pM.\n", - dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, - dev->dev_addr); + netdev_info(dev, "%s found at %#lx, IRQ %d, %pM.\n", + pci_clone_list[chip_idx].name, ioaddr, dev->irq, + dev->dev_addr); return 0; @@ -450,9 +453,10 @@ static int ne2k_pci_close(struct net_device *dev) static void ne2k_pci_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (debug > 1) printk("%s: Resetting the 8390 t=%ld...", - dev->name, jiffies); + netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", + jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -462,7 +466,7 @@ static void ne2k_pci_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (jiffies - reset_start_time > 2) { - printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name); + netdev_err(dev, "ne2k_pci_reset_8390() did not complete.\n"); break; } outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -479,9 +483,9 @@ static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr * /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr " + netdev_err(dev, "DMAing conflict in ne2k_pci_get_8390_hdr " "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } @@ -517,9 +521,9 @@ static void ne2k_pci_block_input(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_block_input " + netdev_err(dev, "DMAing conflict in ne2k_pci_block_input " "[DMAstat:%d][irqlock:%d].\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -572,9 +576,9 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - printk("%s: DMAing conflict in ne2k_pci_block_output." + netdev_err(dev, "DMAing conflict in ne2k_pci_block_output." "[DMAstat:%d][irqlock:%d]\n", - dev->name, ei_status.dmaing, ei_status.irqlock); + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -619,7 +623,7 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */ - printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); ne2k_pci_reset_8390(dev); NS8390_init(dev,1); break; @@ -640,8 +644,24 @@ static void ne2k_pci_get_drvinfo(struct net_device *dev, strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); } +static u32 ne2k_pci_get_msglevel(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + return ei_local->msg_enable; +} + +static void ne2k_pci_set_msglevel(struct net_device *dev, u32 v) +{ + struct ei_device *ei_local = netdev_priv(dev); + + ei_local->msg_enable = v; +} + static const struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, + .get_msglevel = ne2k_pci_get_msglevel, + .set_msglevel = ne2k_pci_set_msglevel, }; static void ne2k_pci_remove_one(struct pci_dev *pdev) diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index 46c5aadaca8e..eea33d667fb0 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -67,7 +67,7 @@ #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ static const char *if_names[] = { "auto", "10baseT", "10base2"}; - +static u32 pcnet_msg_enable; /*====================================================================*/ @@ -558,6 +558,7 @@ static int pcnet_config(struct pcmcia_device *link) int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; + struct ei_device *ei_local; dev_dbg(&link->dev, "pcnet_config\n"); @@ -607,6 +608,8 @@ static int pcnet_config(struct pcmcia_device *link) mii_phy_probe(dev); SET_NETDEV_DEV(dev, &link->dev); + ei_local = netdev_priv(dev); + ei_local->msg_enable = pcnet_msg_enable; if (register_netdev(dev) != 0) { pr_notice("register_netdev() failed\n"); @@ -616,7 +619,7 @@ static int pcnet_config(struct pcmcia_device *link) if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); netdev_info(dev, "NE2000 (DL100%d rev %02x): ", - (info->flags & IS_DL10022) ? 22 : 19, id); + (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) pr_cont("PNA, "); } else { @@ -1063,9 +1066,9 @@ static void ei_watchdog(u_long arg) if (info->phy_id == info->eth_phy) { if (p) netdev_info(dev, "autonegotiation complete: " - "%sbaseT-%cD selected\n", - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); + "%sbaseT-%cD selected\n", + ((p & 0x0180) ? "100" : "10"), + ((p & 0x0140) ? 'F' : 'H')); else netdev_info(dev, "link partner did not autonegotiate\n"); } @@ -1081,7 +1084,7 @@ static void ei_watchdog(u_long arg) mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; netdev_info(dev, "switched to %s transceiver\n", - (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); + (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); info->link_status = 0; @@ -1128,9 +1131,9 @@ static void dma_get_8390_hdr(struct net_device *dev, unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -1159,13 +1162,14 @@ static void dma_block_input(struct net_device *dev, int count, unsigned int nic_base = dev->base_addr; int xfer_count = count; char *buf = skb->data; + struct ei_device *ei_local = netdev_priv(dev); - if ((ei_debug > 4) && (count != 4)) + if ((netif_msg_rx_status(ei_local)) && (count != 4)) netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1183,7 +1187,8 @@ static void dma_block_input(struct net_device *dev, int count, /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ #ifdef PCMCIA_DEBUG - if (ei_debug > 4) { /* DMA termination address check... */ + /* DMA termination address check... */ + if (netif_msg_rx_status(ei_local)) { int addr, tries = 20; do { /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here @@ -1196,8 +1201,8 @@ static void dma_block_input(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) netdev_notice(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -1213,12 +1218,12 @@ static void dma_block_output(struct net_device *dev, int count, pcnet_dev_t *info = PRIV(dev); #ifdef PCMCIA_DEBUG int retries = 0; + struct ei_device *ei_local = netdev_priv(dev); #endif u_long dma_start; #ifdef PCMCIA_DEBUG - if (ei_debug > 4) - netdev_dbg(dev, "[bo=%d]\n", count); + netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? @@ -1227,9 +1232,9 @@ static void dma_block_output(struct net_device *dev, int count, if (count & 0x01) count++; if (ei_status.dmaing) { - netdev_notice(dev, "DMAing conflict in dma_block_output." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "DMAing conflict in dma_block_output." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1256,7 +1261,8 @@ static void dma_block_output(struct net_device *dev, int count, #ifdef PCMCIA_DEBUG /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ - if (ei_debug > 4) { /* DMA termination address check... */ + /* DMA termination address check... */ + if (netif_msg_tx_queued(ei_local)) { int addr, tries = 20; do { int high = inb_p(nic_base + EN0_RSARHI); @@ -1267,8 +1273,8 @@ static void dma_block_output(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) { netdev_notice(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -1277,10 +1283,10 @@ static void dma_block_output(struct net_device *dev, int count, while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - netdev_notice(dev, "timeout waiting for Tx RDC.\n"); - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - break; + netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + pcnet_reset_8390(dev); + NS8390_init(dev, 1); + break; } outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index b0fbce39661a..139385dcdaa7 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -111,6 +111,7 @@ static struct isapnp_device_id ultra_device_ids[] __initdata = { MODULE_DEVICE_TABLE(isapnp, ultra_device_ids); #endif +static u32 ultra_msg_enable; #define START_PG 0x00 /* First page of TX buffer */ @@ -211,6 +212,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) unsigned char num_pages, irqreg, addr, piomode; unsigned char idreg = inb(ioaddr + 7); unsigned char reg4 = inb(ioaddr + 4) & 0x7f; + struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -232,16 +234,16 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) goto out; } - if (ei_debug && version_printed++ == 0) - printk(version); + if ((ultra_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ"; for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - printk("%s: %s at %#3x, %pM", dev->name, model_name, - ioaddr, dev->dev_addr); + netdev_info(dev, "%s at %#3x, %pM", model_name, + ioaddr, dev->dev_addr); /* Switch from the station address to the alternate register set and read the useful registers there. */ @@ -265,7 +267,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)]; if (irq == 0) { - printk(", failed to detect IRQ line.\n"); + pr_cont(", failed to detect IRQ line.\n"); retval = -EAGAIN; goto out; } @@ -296,7 +298,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256); if (!ei_status.mem) { - printk(", failed to ioremap.\n"); + pr_cont(", failed to ioremap.\n"); retval = -ENOMEM; goto out; } @@ -304,14 +306,15 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256; if (piomode) { - printk(",%s IRQ %d programmed-I/O mode.\n", - eeprom_irq ? "EEPROM" : "assigned ", dev->irq); + pr_cont(", %s IRQ %d programmed-I/O mode.\n", + eeprom_irq ? "EEPROM" : "assigned ", dev->irq); ei_status.block_input = &ultra_pio_input; ei_status.block_output = &ultra_pio_output; ei_status.get_8390_hdr = &ultra_pio_get_hdr; } else { - printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ", - dev->irq, dev->mem_start, dev->mem_end-1); + pr_cont(", %s IRQ %d memory %#lx-%#lx.\n", + eeprom_irq ? "" : "assigned ", dev->irq, dev->mem_start, + dev->mem_end-1); ei_status.block_input = &ultra_block_input; ei_status.block_output = &ultra_block_output; ei_status.get_8390_hdr = &ultra_get_8390_hdr; @@ -320,6 +323,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &ultra_netdev_ops; NS8390_init(dev, 0); + ei_local->msg_enable = ultra_msg_enable; retval = register_netdev(dev); if (retval) @@ -356,12 +360,15 @@ static int __init ultra_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) ultra_device_ids[i].driver_data, - dev->base_addr, dev->irq); + netdev_info(dev, + "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) ultra_device_ids[i].driver_data, + dev->base_addr, dev->irq); if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); - pnp_device_detach(idev); + netdev_err(dev, + "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", + dev->base_addr); + pnp_device_detach(idev); return -ENXIO; } ei_status.priv = (unsigned long)idev; @@ -412,9 +419,10 @@ static void ultra_reset_8390(struct net_device *dev) { int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */ + struct ei_device *ei_local = netdev_priv(dev); outb(ULTRA_RESET, cmd_port); - if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting Ultra, t=%ld...\n", jiffies); ei_status.txing = 0; outb(0x00, cmd_port); /* Disable shared memory for safety. */ @@ -424,7 +432,7 @@ ultra_reset_8390(struct net_device *dev) else outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */ - if (ei_debug > 1) printk("reset done\n"); + netif_dbg(ei_local, hw, dev, "reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -530,11 +538,11 @@ static int ultra_close_card(struct net_device *dev) { int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); netif_stop_queue(dev); - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); outb(0x00, ioaddr + 6); /* Disable interrupts. */ free_irq(dev->irq, dev); @@ -556,8 +564,10 @@ static int irq[MAX_ULTRA_CARDS]; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); +module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index 8df4c4157230..aca957d4e121 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -69,6 +69,11 @@ static void stnic_block_output (struct net_device *dev, int count, static void stnic_init (struct net_device *dev); +static u32 stnic_msg_enable; + +module_param_named(msg_enable, stnic_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); + /* SH7750 specific read/write io. */ static inline void STNIC_DELAY (void) @@ -100,6 +105,7 @@ static int __init stnic_probe(void) { struct net_device *dev; int i, err; + struct ei_device *ei_local; /* If we are not running on a SolutionEngine, give up now */ if (! MACH_SE) @@ -125,10 +131,10 @@ static int __init stnic_probe(void) share and the board will usually be enabled. */ err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (err) { - printk (KERN_EMERG " unable to get IRQ %d.\n", dev->irq); - free_netdev(dev); - return err; - } + netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq); + free_netdev(dev); + return err; + } ei_status.name = dev->name; ei_status.word16 = 1; @@ -147,6 +153,8 @@ static int __init stnic_probe(void) ei_status.block_output = &stnic_block_output; stnic_init (dev); + ei_local = netdev_priv(dev); + ei_local->msg_enable = stnic_msg_enable; err = register_netdev(dev); if (err) { @@ -156,7 +164,7 @@ static int __init stnic_probe(void) } stnic_dev = dev; - printk (KERN_INFO "NS ST-NIC 83902A\n"); + netdev_info(dev, "NS ST-NIC 83902A\n"); return 0; } @@ -164,10 +172,11 @@ static int __init stnic_probe(void) static void stnic_reset (struct net_device *dev) { + struct ei_device *ei_local = netdev_priv(dev); + *(vhalf *) PA_83902_RST = 0; udelay (5); - if (ei_debug > 1) - printk (KERN_WARNING "8390 reset done (%ld).\n", jiffies); + netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies); *(vhalf *) PA_83902_RST = ~0; udelay (5); } @@ -176,6 +185,8 @@ static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { + struct ei_device *ei_local = netdev_priv(dev); + half buf[2]; STNIC_WRITE (PG0_RSAR0, 0); @@ -196,8 +207,7 @@ stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8); #endif - if (ei_debug > 1) - printk (KERN_DEBUG "ring %x status %02x next %02x count %04x.\n", + netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n", ring_page, hdr->status, hdr->next, hdr->count); STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index 03eb3eed49fa..dd7d816bde52 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -60,6 +60,7 @@ static void wd_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static int wd_close(struct net_device *dev); +static u32 wd_msg_enable; #define WD_START_PG 0x00 /* First page of TX buffer */ #define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */ @@ -170,6 +171,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */ const char *model_name; static unsigned version_printed; + struct ei_device *ei_local = netdev_priv(dev); for (i = 0; i < 8; i++) checksum += inb(ioaddr + 8 + i); @@ -180,19 +182,19 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) /* Check for semi-valid mem_start/end values if supplied. */ if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) { - printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); + netdev_warn(dev, + "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); dev->mem_start = 0; dev->mem_end = 0; } - if (ei_debug && version_printed++ == 0) - printk(version); + if ((wd_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) + netdev_info(dev, version); for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - printk("%s: WD80x3 at %#3x, %pM", - dev->name, ioaddr, dev->dev_addr); + netdev_info(dev, "WD80x3 at %#3x, %pM", ioaddr, dev->dev_addr); /* The following PureData probe code was contributed by Mike Jagdis . Puredata does software @@ -244,8 +246,9 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) } #ifndef final_version if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01)) - printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", - word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8); + pr_cont("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", + word16 ? 16 : 8, + (inb(ioaddr+1) & 0x01) ? 16 : 8); #endif } @@ -259,7 +262,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) if (reg0 == 0xff || reg0 == 0) { /* Future plan: this could check a few likely locations first. */ dev->mem_start = 0xd0000; - printk(" assigning address %#lx", dev->mem_start); + pr_cont(" assigning address %#lx", dev->mem_start); } else { int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f; /* Some boards don't have the register 5 -- it returns 0xff. */ @@ -297,8 +300,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */ - if (ei_debug > 2) - printk(" autoirq is %d", dev->irq); + if (netif_msg_drv(ei_local)) + pr_cont(" autoirq is %d", dev->irq); if (dev->irq < 2) dev->irq = word16 ? 10 : 5; } else @@ -310,7 +313,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) share and the board will usually be enabled. */ i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (i) { - printk (" unable to get IRQ %d.\n", dev->irq); + pr_cont(" unable to get IRQ %d.\n", dev->irq); return i; } @@ -338,8 +341,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) return -ENOMEM; } - printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", - model_name, dev->irq, dev->mem_start, dev->mem_end-1); + pr_cont(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", + model_name, dev->irq, dev->mem_start, dev->mem_end-1); ei_status.reset_8390 = wd_reset_8390; ei_status.block_input = wd_block_input; @@ -348,6 +351,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &wd_netdev_ops; NS8390_init(dev, 0); + ei_local->msg_enable = wd_msg_enable; #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ @@ -385,9 +389,11 @@ static void wd_reset_8390(struct net_device *dev) { int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); outb(WD_RESET, wd_cmd_port); - if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies); + netif_dbg(ei_local, hw, dev, "resetting the WD80x3 t=%lu...\n", + jiffies); ei_status.txing = 0; /* Set up the ASIC registers, just in case something changed them. */ @@ -395,7 +401,7 @@ wd_reset_8390(struct net_device *dev) if (ei_status.word16) outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); - if (ei_debug > 1) printk("reset done\n"); + netif_dbg(ei_local, hw, dev, "reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -474,9 +480,9 @@ static int wd_close(struct net_device *dev) { int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); ei_close(dev); /* Change from 16-bit to 8-bit shared memory so reboot works. */ @@ -502,10 +508,12 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param_array(mem_end, int, NULL, 0); +module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)"); MODULE_PARM_DESC(mem_end, "memory end address(es)"); +MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index 85ec4c2d2645..7b373e65f377 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -44,6 +44,8 @@ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; +static u32 zorro8390_msg_enable; + #include "lib8390.c" #define DRV_NAME "zorro8390" @@ -86,9 +88,9 @@ static struct card_info { static void zorro8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); - if (ei_debug > 1) - netdev_dbg(dev, "resetting - t=%ld...\n", jiffies); + netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -119,8 +121,9 @@ static void zorro8390_get_8390_hdr(struct net_device *dev, * If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", - __func__, ei_status.dmaing, ei_status.irqlock); + netdev_warn(dev, + "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); return; } @@ -230,7 +233,7 @@ static void zorro8390_block_output(struct net_device *dev, int count, while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_err(dev, "timeout waiting for Tx RDC\n"); + netdev_warn(dev, "timeout waiting for Tx RDC\n"); zorro8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -248,8 +251,9 @@ static int zorro8390_open(struct net_device *dev) static int zorro8390_close(struct net_device *dev) { - if (ei_debug > 1) - netdev_dbg(dev, "Shutting down ethercard\n"); + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); __ei_close(dev); return 0; } @@ -293,6 +297,7 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, int err; unsigned char SA_prom[32]; int start_page, stop_page; + struct ei_device *ei_local = netdev_priv(dev); static u32 zorro8390_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, @@ -383,6 +388,9 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, dev->netdev_ops = &zorro8390_netdev_ops; __NS8390_init(dev, 0); + + ei_local->msg_enable = zorro8390_msg_enable; + err = register_netdev(dev); if (err) { free_irq(IRQ_AMIGA_PORTS, dev); -- cgit v1.2.3 From 9508fdde4d53f0d9e583e841ed08796d2f310be1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 11 Dec 2013 17:20:31 -0500 Subject: Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" This reverts commit 99023e90fe5c147ea0665bda86764ea44f08a622. Accidently checked this into 'net' instead of 'net-next'. Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/8390.h | 7 +- drivers/net/ethernet/8390/apne.c | 62 ++++++++---------- drivers/net/ethernet/8390/ax88796.c | 22 +------ drivers/net/ethernet/8390/axnet_cs.c | 119 ++++++++++++++++++---------------- drivers/net/ethernet/8390/etherh.c | 51 ++++++--------- drivers/net/ethernet/8390/hydra.c | 11 +--- drivers/net/ethernet/8390/lib8390.c | 77 ++++++++++------------ drivers/net/ethernet/8390/mac8390.c | 19 ++---- drivers/net/ethernet/8390/mcf8390.c | 8 +-- drivers/net/ethernet/8390/ne.c | 96 ++++++++++++--------------- drivers/net/ethernet/8390/ne2k-pci.c | 54 +++++---------- drivers/net/ethernet/8390/pcnet_cs.c | 62 ++++++++---------- drivers/net/ethernet/8390/smc-ultra.c | 48 ++++++-------- drivers/net/ethernet/8390/stnic.c | 28 +++----- drivers/net/ethernet/8390/wd.c | 42 +++++------- drivers/net/ethernet/8390/zorro8390.c | 22 ++----- 16 files changed, 302 insertions(+), 426 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/8390/8390.h b/drivers/net/ethernet/8390/8390.h index 3e2f2c2e7b58..2923c51bb351 100644 --- a/drivers/net/ethernet/8390/8390.h +++ b/drivers/net/ethernet/8390/8390.h @@ -21,6 +21,12 @@ struct e8390_pkt_hdr { unsigned short count; /* header + packet length in bytes */ }; +#ifdef notdef +extern int ei_debug; +#else +#define ei_debug 1 +#endif + #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev); void eip_poll(struct net_device *dev); @@ -93,7 +99,6 @@ struct ei_device { u32 *reg_offset; /* Register mapping table */ spinlock_t page_lock; /* Page register locks */ unsigned long priv; /* Private field to store bus IDs etc. */ - u32 msg_enable; /* debug message level */ #ifdef AX88796_PLATFORM unsigned char rxcr_base; /* default value for RXCR */ #endif diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index 811fa5d5c697..912ed7a5f33a 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -116,15 +116,9 @@ static const char version[] = static int apne_owned; /* signal if card already owned */ -static u32 apne_msg_enable; -module_param_named(msg_enable, apne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - struct net_device * __init apne_probe(int unit) { struct net_device *dev; - struct ei_device *ei_local; - #ifndef MANUAL_CONFIG char tuple[8]; #endif @@ -139,11 +133,11 @@ struct net_device * __init apne_probe(int unit) if ( !(AMIGAHW_PRESENT(PCMCIA)) ) return ERR_PTR(-ENODEV); - pr_info("Looking for PCMCIA ethernet card : "); + printk("Looking for PCMCIA ethernet card : "); /* check if a card is inserted */ if (!(PCMCIA_INSERTED)) { - pr_cont("NO PCMCIA card inserted\n"); + printk("NO PCMCIA card inserted\n"); return ERR_PTR(-ENODEV); } @@ -154,8 +148,6 @@ struct net_device * __init apne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); } - ei_local = netdev_priv(dev); - ei_local->msg_enable = apne_msg_enable; /* disable pcmcia irq for readtuple */ pcmcia_disable_irq(); @@ -163,14 +155,14 @@ struct net_device * __init apne_probe(int unit) #ifndef MANUAL_CONFIG if ((pcmcia_copy_tuple(CISTPL_FUNCID, tuple, 8) < 3) || (tuple[2] != CISTPL_FUNCID_NETWORK)) { - pr_cont("not an ethernet card\n"); + printk("not an ethernet card\n"); /* XXX: shouldn't we re-enable irq here? */ free_netdev(dev); return ERR_PTR(-ENODEV); } #endif - pr_cont("ethernet PCMCIA card inserted\n"); + printk("ethernet PCMCIA card inserted\n"); if (!init_pcmcia()) { /* XXX: shouldn't we re-enable irq here? */ @@ -212,12 +204,11 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) int neX000, ctron; #endif static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); - if ((apne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); - netdev_info(dev, "PCMCIA NE*000 ethercard probe"); + printk("PCMCIA NE*000 ethercard probe"); /* Reset card. Who knows what dain-bramaged state it was left in. */ { unsigned long reset_start_time = jiffies; @@ -226,7 +217,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - pr_cont(" not found (no reset ack).\n"); + printk(" not found (no reset ack).\n"); return -ENODEV; } @@ -297,7 +288,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) start_page = 0x01; stop_page = (wordlength == 2) ? 0x40 : 0x20; } else { - pr_cont(" not found.\n"); + printk(" not found.\n"); return -ENXIO; } @@ -329,9 +320,9 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr) for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = SA_prom[i]; - pr_cont(" %pM\n", dev->dev_addr); + printk(" %pM\n", dev->dev_addr); - netdev_info(dev, "%s found.\n", name); + printk("%s: %s found.\n", dev->name, name); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -361,11 +352,10 @@ static void apne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); init_pcmcia(); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -375,8 +365,8 @@ apne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - netdev_err(dev, "ne_reset_8390() did not complete.\n"); - break; + printk("%s: ne_reset_8390() did not complete.\n", dev->name); + break; } outb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr. */ } @@ -396,9 +386,9 @@ apne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pa /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } @@ -443,9 +433,9 @@ apne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int rin /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d][intr:%d].\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d][intr:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -491,9 +481,9 @@ apne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d][intr:%d]\n", - ei_status.dmaing, ei_status.irqlock, dev->irq); + printk("%s: DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d][intr:%d]\n", + dev->name, ei_status.dmaing, ei_status.irqlock, dev->irq); return; } ei_status.dmaing |= 0x01; @@ -523,7 +513,7 @@ apne_block_output(struct net_device *dev, int count, while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk("%s: timeout waiting for Tx RDC.\n", dev->name); apne_reset_8390(dev); NS8390_init(dev,1); break; @@ -546,8 +536,8 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id) pcmcia_ack_int(pcmcia_intreq); return IRQ_NONE; } - if (apne_msg_enable & NETIF_MSG_INTR) - pr_debug("pcmcia intreq = %x\n", pcmcia_intreq); + if (ei_debug > 3) + printk("pcmcia intreq = %x\n", pcmcia_intreq); pcmcia_disable_irq(); /* to get rid of the sti() within ei_interrupt */ ei_interrupt(irq, dev_id); pcmcia_ack_int(pcmcia_get_intreq()); diff --git a/drivers/net/ethernet/8390/ax88796.c b/drivers/net/ethernet/8390/ax88796.c index 8ed5b34d7553..36fa577970bb 100644 --- a/drivers/net/ethernet/8390/ax88796.c +++ b/drivers/net/ethernet/8390/ax88796.c @@ -78,8 +78,6 @@ static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electron #define AX_GPOC_PPDSET BIT(6) -static u32 ax_msg_enable; - /* device private data */ struct ax_device { @@ -149,7 +147,8 @@ static void ax_reset_8390(struct net_device *dev) unsigned long reset_start_time = jiffies; void __iomem *addr = (void __iomem *)dev->base_addr; - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting the 8390 t=%ld\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -497,28 +496,12 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return phy_ethtool_sset(phy_dev, cmd); } -static u32 ax_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void ax_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops ax_ethtool_ops = { .get_drvinfo = ax_get_drvinfo, .get_settings = ax_get_settings, .set_settings = ax_set_settings, .get_link = ethtool_op_get_link, .get_ts_info = ethtool_op_get_ts_info, - .get_msglevel = ax_get_msglevel, - .set_msglevel = ax_set_msglevel, }; #ifdef CONFIG_AX88796_93CX6 @@ -780,7 +763,6 @@ static int ax_init_dev(struct net_device *dev) ei_local->block_output = &ax_block_output; ei_local->get_8390_hdr = &ax_get_8390_hdr; ei_local->priv = 0; - ei_local->msg_enable = ax_msg_enable; dev->netdev_ops = &ax_netdev_ops; dev->ethtool_ops = &ax_ethtool_ops; diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c index 5698a4c85d8e..d801c1410fb0 100644 --- a/drivers/net/ethernet/8390/axnet_cs.c +++ b/drivers/net/ethernet/8390/axnet_cs.c @@ -105,7 +105,6 @@ static void AX88190_init(struct net_device *dev, int startp); static int ax_open(struct net_device *dev); static int ax_close(struct net_device *dev); static irqreturn_t ax_interrupt(int irq, void *dev_id); -static u32 axnet_msg_enable; /*====================================================================*/ @@ -153,7 +152,6 @@ static int axnet_probe(struct pcmcia_device *link) return -ENOMEM; ei_local = netdev_priv(dev); - ei_local->msg_enable = axnet_msg_enable; spin_lock_init(&ei_local->page_lock); info = PRIV(dev); @@ -652,12 +650,11 @@ static void block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { unsigned int nic_base = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); int xfer_count = count; char *buf = skb->data; - if ((netif_msg_rx_status(ei_local)) && (count != 4)) - netdev_dbg(dev, "[bi=%d]\n", count+4); + if ((ei_debug > 4) && (count != 4)) + pr_debug("%s: [bi=%d]\n", dev->name, count+4); outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO); outb_p(ring_offset >> 8, nic_base + EN0_RSARHI); outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD); @@ -813,6 +810,11 @@ module_pcmcia_driver(axnet_cs_driver); #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef ei_debug +int ei_debug = 1; +#endif + /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -923,10 +925,11 @@ static void axnet_tx_timeout(struct net_device *dev) isr = inb(e8390_base+EN0_ISR); spin_unlock_irqrestore(&ei_local->page_lock, flags); - netdev_dbg(dev, "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", - (txsr & ENTSR_ABT) ? "excess collisions." : - (isr) ? "lost interrupt?" : "cable problem?", - txsr, isr, tickssofar); + netdev_printk(KERN_DEBUG, dev, + "Tx timed out, %s TSR=%#2x, ISR=%#2x, t=%d.\n", + (txsr & ENTSR_ABT) ? "excess collisions." : + (isr) ? "lost interrupt?" : "cable problem?", + txsr, isr, tickssofar); if (!isr && !dev->stats.tx_packets) { @@ -995,30 +998,29 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb, { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx2 > 0) - netdev_dbg(dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", - ei_local->tx2, ei_local->lasttx, - ei_local->txing); + if (ei_debug && ei_local->tx2 > 0) + netdev_printk(KERN_DEBUG, dev, + "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + ei_local->tx2, ei_local->lasttx, + ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx1 > 0) - netdev_dbg(dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", - ei_local->tx1, ei_local->lasttx, - ei_local->txing); + if (ei_debug && ei_local->tx1 > 0) + netdev_printk(KERN_DEBUG, dev, + "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + ei_local->tx1, ei_local->lasttx, + ei_local->txing); } else { /* We should never get here. */ - netif_dbg(ei_local, tx_err, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, - ei_local->lasttx); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, + ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -1122,9 +1124,10 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) spin_unlock_irqrestore(&ei_local->page_lock, flags); return IRQ_NONE; } - - netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", - inb_p(e8390_base + EN0_ISR)); + + if (ei_debug > 3) + netdev_printk(KERN_DEBUG, dev, "interrupt(isr=%#2.2x)\n", + inb_p(e8390_base + EN0_ISR)); outb_p(0x00, e8390_base + EN0_ISR); ei_local->irqlock = 1; @@ -1134,8 +1137,9 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) ++nr_serviced < MAX_SERVICE) { if (!netif_running(dev) || (interrupts == 0xff)) { - netif_warn(ei_local, intr, dev, - "interrupt from stopped card\n"); + if (ei_debug > 1) + netdev_warn(dev, + "interrupt from stopped card\n"); outb_p(interrupts, e8390_base + EN0_ISR); interrupts = 0; break; @@ -1171,15 +1175,14 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id) } } - if (interrupts && (netif_msg_intr(ei_local))) + if (interrupts && ei_debug > 3) { handled = 1; if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ - if (interrupts != 0xFF) - netdev_warn(dev, - "Too much work at interrupt, status %#2.2x\n", + if(interrupts!=0xFF) + netdev_warn(dev, "Too much work at interrupt, status %#2.2x\n", interrupts); outb_p(ENISR_ALL, e8390_base + EN0_ISR); /* Ack. most intrs. */ } else { @@ -1218,7 +1221,8 @@ static void ei_tx_err(struct net_device *dev) unsigned char tx_was_aborted = txsr & (ENTSR_ABT+ENTSR_FU); #ifdef VERBOSE_ERROR_DUMP - netdev_dbg(dev, "transmitter error (%#2x):", txsr); + netdev_printk(KERN_DEBUG, dev, + "transmitter error (%#2x):", txsr); if (txsr & ENTSR_ABT) pr_cont(" excess-collisions"); if (txsr & ENTSR_ND) @@ -1283,9 +1287,9 @@ static void ei_tx_intr(struct net_device *dev) else if (ei_local->tx2 < 0) { if (ei_local->lasttx != 2 && ei_local->lasttx != -2) - netdev_err(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", - ei_local->name, ei_local->lasttx, - ei_local->tx2); + netdev_info(dev, "%s: bogus last_tx_buffer %d, tx2=%d\n", + ei_local->name, ei_local->lasttx, + ei_local->tx2); ei_local->tx2 = 0; if (ei_local->tx1 > 0) { @@ -1362,11 +1366,9 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if ((netif_msg_rx_err(ei_local)) && - this_frame != ei_local->current_page && - (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", - this_frame, ei_local->current_page); + if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame!=0x0 || rxing_page!=0xFF)) + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", + this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ break; /* Done for now */ @@ -1381,10 +1383,11 @@ static void ei_receive(struct net_device *dev) if (pkt_len < 60 || pkt_len > 1518) { - netif_err(ei_local, rx_err, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } @@ -1395,9 +1398,10 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - netif_err(ei_local, rx_err, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + if (ei_debug > 1) + netdev_printk(KERN_DEBUG, dev, + "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } @@ -1416,10 +1420,11 @@ static void ei_receive(struct net_device *dev) } else { - netif_err(ei_local, rx_err, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + if (ei_debug) + netdev_printk(KERN_DEBUG, dev, + "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -1456,7 +1461,6 @@ static void ei_rx_overrun(struct net_device *dev) axnet_dev_t *info = PRIV(dev); long e8390_base = dev->base_addr; unsigned char was_txing, must_resend = 0; - struct ei_device *ei_local = netdev_priv(dev); /* * Record whether a Tx was in progress and then issue the @@ -1464,8 +1468,9 @@ static void ei_rx_overrun(struct net_device *dev) */ was_txing = inb_p(e8390_base+E8390_CMD) & E8390_TRANS; outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - - netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); + + if (ei_debug > 1) + netdev_printk(KERN_DEBUG, dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* diff --git a/drivers/net/ethernet/8390/etherh.c b/drivers/net/ethernet/8390/etherh.c index b15e482a7c63..78c6fb4b1143 100644 --- a/drivers/net/ethernet/8390/etherh.c +++ b/drivers/net/ethernet/8390/etherh.c @@ -56,6 +56,9 @@ #define ei_inb_p(_p) readb((void __iomem *)_p) #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p) +#define NET_DEBUG 0 +#define DEBUG_INIT 2 + #define DRV_NAME "etherh" #define DRV_VERSION "1.11" @@ -64,7 +67,7 @@ static char version[] __initdata = #include "lib8390.c" -static u32 etherh_msg_enable; +static unsigned int net_debug = NET_DEBUG; struct etherh_priv { void __iomem *ioc_fast; @@ -314,9 +317,9 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -358,7 +361,8 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for TX RDC\n"); + printk(KERN_ERR "%s: timeout waiting for TX RDC\n", + dev->name); etherh_reset (dev); __NS8390_init (dev, 1); break; @@ -379,9 +383,9 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_block_input: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_block_input: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -419,9 +423,9 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p void __iomem *dma_base, *addr; if (ei_local->dmaing) { - netdev_err(dev, "DMAing conflict in etherh_get_header: " - " DMAstat %d irqlock %d\n", - ei_local->dmaing, ei_local->irqlock); + printk(KERN_ERR "%s: DMAing conflict in etherh_get_header: " + " DMAstat %d irqlock %d\n", dev->name, + ei_local->dmaing, ei_local->irqlock); return; } @@ -509,8 +513,8 @@ static void __init etherh_banner(void) { static int version_printed; - if ((etherh_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - pr_info("%s", version); + if (net_debug && version_printed++ == 0) + printk(KERN_INFO "%s", version); } /* @@ -621,27 +625,11 @@ static int etherh_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return 0; } -static u32 etherh_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void etherh_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops etherh_ethtool_ops = { .get_settings = etherh_get_settings, .set_settings = etherh_set_settings, .get_drvinfo = etherh_get_drvinfo, .get_ts_info = ethtool_op_get_ts_info, - .get_msglevel = etherh_get_msglevel, - .set_msglevel = etherh_set_msglevel, }; static const struct net_device_ops etherh_netdev_ops = { @@ -758,7 +746,6 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) ei_local->block_output = etherh_block_output; ei_local->get_8390_hdr = etherh_get_header; ei_local->interface_num = 0; - ei_local->msg_enable = etherh_msg_enable; etherh_reset(dev); __NS8390_init(dev, 0); @@ -767,8 +754,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) if (ret) goto free; - netdev_info(dev, "%s in slot %d, %pM\n", - data->name, ec->slot_no, dev->dev_addr); + printk(KERN_INFO "%s: %s in slot %d, %pM\n", + dev->name, data->name, ec->slot_no, dev->dev_addr); ecard_set_drvdata(ec, dev); diff --git a/drivers/net/ethernet/8390/hydra.c b/drivers/net/ethernet/8390/hydra.c index d8b86c83dd15..fb3dd4399cf3 100644 --- a/drivers/net/ethernet/8390/hydra.c +++ b/drivers/net/ethernet/8390/hydra.c @@ -66,7 +66,6 @@ static void hydra_block_input(struct net_device *dev, int count, static void hydra_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void hydra_remove_one(struct zorro_dev *z); -static u32 hydra_msg_enable; static struct zorro_device_id hydra_zorro_tbl[] = { { ZORRO_PROD_HYDRA_SYSTEMS_AMIGANET }, @@ -120,7 +119,6 @@ static int hydra_init(struct zorro_dev *z) int start_page, stop_page; int j; int err; - struct ei_device *ei_local; static u32 hydra_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, @@ -139,8 +137,6 @@ static int hydra_init(struct zorro_dev *z) start_page = NESM_START_PG; stop_page = NESM_STOP_PG; - ei_local = netdev_priv(dev); - ei_local->msg_enable = hydra_msg_enable; dev->base_addr = ioaddr; dev->irq = IRQ_AMIGA_PORTS; @@ -191,16 +187,15 @@ static int hydra_open(struct net_device *dev) static int hydra_close(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name); __ei_close(dev); return 0; } static void hydra_reset_8390(struct net_device *dev) { - netdev_info(dev, "Hydra hw reset not there\n"); + printk(KERN_INFO "Hydra hw reset not there\n"); } static void hydra_get_8390_hdr(struct net_device *dev, diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c index d2cd80444ade..b329f5c0d62b 100644 --- a/drivers/net/ethernet/8390/lib8390.c +++ b/drivers/net/ethernet/8390/lib8390.c @@ -99,6 +99,11 @@ #define ei_block_input (ei_local->block_input) #define ei_get_8390_hdr (ei_local->get_8390_hdr) +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef ei_debug +int ei_debug = 1; +#endif + /* Index to functions. */ static void ei_tx_intr(struct net_device *dev); static void ei_tx_err(struct net_device *dev); @@ -111,11 +116,6 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length, static void do_set_multicast_list(struct net_device *dev); static void __NS8390_init(struct net_device *dev, int startp); -static unsigned version_printed; -static u32 msg_enable; -module_param(msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - /* * SMP and the 8390 setup. * @@ -345,23 +345,19 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, if (ei_local->tx1 == 0) { output_page = ei_local->tx_start_page; ei_local->tx1 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx2 > 0) - netdev_dbg(dev, - "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", + if (ei_debug && ei_local->tx2 > 0) + netdev_dbg(dev, "idle transmitter tx2=%d, lasttx=%d, txing=%d\n", ei_local->tx2, ei_local->lasttx, ei_local->txing); } else if (ei_local->tx2 == 0) { output_page = ei_local->tx_start_page + TX_PAGES/2; ei_local->tx2 = send_length; - if ((netif_msg_tx_queued(ei_local)) && - ei_local->tx1 > 0) - netdev_dbg(dev, - "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", + if (ei_debug && ei_local->tx1 > 0) + netdev_dbg(dev, "idle transmitter, tx1=%d, lasttx=%d, txing=%d\n", ei_local->tx1, ei_local->lasttx, ei_local->txing); } else { /* We should never get here. */ - netif_dbg(ei_local, tx_err, dev, - "No Tx buffers free! tx1=%d tx2=%d last=%d\n", - ei_local->tx1, ei_local->tx2, ei_local->lasttx); + if (ei_debug) + netdev_dbg(dev, "No Tx buffers free! tx1=%d tx2=%d last=%d\n", + ei_local->tx1, ei_local->tx2, ei_local->lasttx); ei_local->irqlock = 0; netif_stop_queue(dev); ei_outb_p(ENISR_ALL, e8390_base + EN0_IMR); @@ -392,7 +388,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb, } else ei_local->txqueue++; - if (ei_local->tx1 && ei_local->tx2) + if (ei_local->tx1 && ei_local->tx2) netif_stop_queue(dev); else netif_start_queue(dev); @@ -449,8 +445,9 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) /* Change to page 0 and read the intr status reg. */ ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base + E8390_CMD); - netif_dbg(ei_local, intr, dev, "interrupt(isr=%#2.2x)\n", - ei_inb_p(e8390_base + EN0_ISR)); + if (ei_debug > 3) + netdev_dbg(dev, "interrupt(isr=%#2.2x)\n", + ei_inb_p(e8390_base + EN0_ISR)); /* !!Assumption!! -- we stay in page 0. Don't break this. */ while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 && @@ -488,7 +485,7 @@ static irqreturn_t __ei_interrupt(int irq, void *dev_id) ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); } - if (interrupts && (netif_msg_intr(ei_local))) { + if (interrupts && ei_debug) { ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base + E8390_CMD); if (nr_serviced >= MAX_SERVICE) { /* 0xFF is valid for a card removal */ @@ -679,11 +676,10 @@ static void ei_receive(struct net_device *dev) Keep quiet if it looks like a card removal. One problem here is that some clones crash in roughly the same way. */ - if ((netif_msg_rx_status(ei_local)) && + if (ei_debug > 0 && this_frame != ei_local->current_page && (this_frame != 0x0 || rxing_page != 0xFF)) - netdev_err(dev, - "mismatched read page pointers %2x vs %2x\n", + netdev_err(dev, "mismatched read page pointers %2x vs %2x\n", this_frame, ei_local->current_page); if (this_frame == rxing_page) /* Read all the frames? */ @@ -711,10 +707,10 @@ static void ei_receive(struct net_device *dev) } if (pkt_len < 60 || pkt_len > 1518) { - netif_dbg(ei_local, rx_status, dev, - "bogus packet size: %d, status=%#2x nxpg=%#2x\n", - rx_frame.count, rx_frame.status, - rx_frame.next); + if (ei_debug) + netdev_dbg(dev, "bogus packet size: %d, status=%#2x nxpg=%#2x\n", + rx_frame.count, rx_frame.status, + rx_frame.next); dev->stats.rx_errors++; dev->stats.rx_length_errors++; } else if ((pkt_stat & 0x0F) == ENRSR_RXOK) { @@ -722,9 +718,9 @@ static void ei_receive(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 2); if (skb == NULL) { - netif_err(ei_local, rx_err, dev, - "Couldn't allocate a sk_buff of size %d\n", - pkt_len); + if (ei_debug > 1) + netdev_dbg(dev, "Couldn't allocate a sk_buff of size %d\n", + pkt_len); dev->stats.rx_dropped++; break; } else { @@ -740,10 +736,10 @@ static void ei_receive(struct net_device *dev) dev->stats.multicast++; } } else { - netif_err(ei_local, rx_err, dev, - "bogus packet: status=%#2x nxpg=%#2x size=%d\n", - rx_frame.status, rx_frame.next, - rx_frame.count); + if (ei_debug) + netdev_dbg(dev, "bogus packet: status=%#2x nxpg=%#2x size=%d\n", + rx_frame.status, rx_frame.next, + rx_frame.count); dev->stats.rx_errors++; /* NB: The NIC counts CRC, frame and missed errors. */ if (pkt_stat & ENRSR_FO) @@ -793,7 +789,8 @@ static void ei_rx_overrun(struct net_device *dev) was_txing = ei_inb_p(e8390_base+E8390_CMD) & E8390_TRANS; ei_outb_p(E8390_NODMA+E8390_PAGE0+E8390_STOP, e8390_base+E8390_CMD); - netif_dbg(ei_local, rx_err, dev, "Receiver overrun\n"); + if (ei_debug > 1) + netdev_dbg(dev, "Receiver overrun\n"); dev->stats.rx_over_errors++; /* @@ -968,9 +965,8 @@ static void __ei_set_multicast_list(struct net_device *dev) static void ethdev_setup(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - - if ((msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - pr_info("%s", version); + if (ei_debug > 1) + printk(version); ether_setup(dev); @@ -1039,10 +1035,9 @@ static void __NS8390_init(struct net_device *dev, int startp) ei_outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP, e8390_base+E8390_CMD); /* 0x61 */ for (i = 0; i < 6; i++) { ei_outb_p(dev->dev_addr[i], e8390_base + EN1_PHYS_SHIFT(i)); - if ((netif_msg_probe(ei_local)) && + if (ei_debug > 1 && ei_inb_p(e8390_base + EN1_PHYS_SHIFT(i)) != dev->dev_addr[i]) - netdev_err(dev, - "Hw. address read/write mismap %d\n", i); + netdev_err(dev, "Hw. address read/write mismap %d\n", i); } ei_outb_p(ei_local->rx_start_page, e8390_base + EN1_CURPAG); diff --git a/drivers/net/ethernet/8390/mac8390.c b/drivers/net/ethernet/8390/mac8390.c index 90e825e8abfe..88ccc8b14f0a 100644 --- a/drivers/net/ethernet/8390/mac8390.c +++ b/drivers/net/ethernet/8390/mac8390.c @@ -167,7 +167,6 @@ static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static void word_memcpy_tocard(unsigned long tp, const void *fp, int count); static void word_memcpy_fromcard(void *tp, unsigned long fp, int count); -static u32 mac8390_msg_enable; static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev) { @@ -403,7 +402,6 @@ struct net_device * __init mac8390_probe(int unit) struct net_device *dev; struct nubus_dev *ndev = NULL; int err = -ENODEV; - struct ei_device *ei_local; static unsigned int slots; @@ -442,10 +440,6 @@ struct net_device * __init mac8390_probe(int unit) if (!ndev) goto out; - - ei_local = netdev_priv(dev); - ei_local->msg_enable = mac8390_msg_enable; - err = register_netdev(dev); if (err) goto out; @@ -666,22 +660,19 @@ static int mac8390_close(struct net_device *dev) static void mac8390_no_reset(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - ei_status.txing = 0; - netif_info(ei_local, hw, dev, "reset not supported\n"); + if (ei_debug > 1) + pr_info("reset not supported\n"); } static void interlan_reset(struct net_device *dev) { unsigned char *target = nubus_slot_addr(IRQ2SLOT(dev->irq)); - struct ei_device *ei_local = netdev_priv(dev); - - netif_info(ei_local, hw, dev, "Need to reset the NS8390 t=%lu...", - jiffies); + if (ei_debug > 1) + pr_info("Need to reset the NS8390 t=%lu...", jiffies); ei_status.txing = 0; target[0xC0000] = 0; - if (netif_msg_hw(ei_local)) + if (ei_debug > 1) pr_cont("reset complete\n"); } diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index df0ffca91c1c..230efd6fa5d5 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -39,7 +39,6 @@ static const char version[] = #define NESM_START_PG 0x40 /* First page of TX buffer */ #define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ -static u32 mcf8390_msg_enable; #ifdef NE2000_ODDOFFSET /* @@ -154,9 +153,9 @@ static void mcf8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; u32 addr = dev->base_addr; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies); ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET); @@ -289,7 +288,7 @@ static void mcf8390_block_output(struct net_device *dev, int count, dma_start = jiffies; while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) { if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC\n"); + netdev_err(dev, "timeout waiting for Tx RDC\n"); mcf8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -438,7 +437,6 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev); ei_local = netdev_priv(dev); - ei_local->msg_enable = mcf8390_msg_enable; dev->irq = irq->start; dev->base_addr = mem->start; diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c index 58eaa8f34942..b2e840513735 100644 --- a/drivers/net/ethernet/8390/ne.c +++ b/drivers/net/ethernet/8390/ne.c @@ -71,17 +71,14 @@ static struct platform_device *pdev_ne[MAX_NE_CARDS]; static int io[MAX_NE_CARDS]; static int irq[MAX_NE_CARDS]; static int bad[MAX_NE_CARDS]; -static u32 ne_msg_enable; #ifdef MODULE module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(bad, int, NULL, 0); -module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es),required"); MODULE_PARM_DESC(irq, "IRQ number(s)"); MODULE_PARM_DESC(bad, "Accept card(s) with bad signatures"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("NE1000/NE2000 ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); #endif /* MODULE */ @@ -217,8 +214,8 @@ static int __init do_ne_probe(struct net_device *dev) if (base_addr > 0x1ff) { /* Check a single specified location. */ int ret = ne_probe1(dev, base_addr); if (ret) - netdev_warn(dev, "ne.c: No NE*000 card found at " - "i/o = %#lx\n", base_addr); + printk(KERN_WARNING "ne.c: No NE*000 card found at " + "i/o = %#lx\n", base_addr); return ret; } else if (base_addr != 0) /* Don't probe at all. */ @@ -267,14 +264,11 @@ static int __init ne_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - netdev_info(dev, - "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) isapnp_clone_list[i].driver_data, - dev->base_addr, dev->irq); + printk(KERN_INFO "ne.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) isapnp_clone_list[i].driver_data, + dev->base_addr, dev->irq); if (ne_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - netdev_err(dev, - "ne.c: Probe of ISAPnP card at %#lx failed.\n", - dev->base_addr); + printk(KERN_ERR "ne.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); pnp_device_detach(idev); return -ENXIO; } @@ -299,7 +293,6 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) int neX000, ctron, copam, bad_card; int reg0, ret; static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -326,10 +319,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } } - if ((ne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, "%s%s", version1, version2); + if (ei_debug && version_printed++ == 0) + printk(KERN_INFO "%s%s", version1, version2); - netdev_info(dev, "NE*000 ethercard probe at %#3lx:", ioaddr); + printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); /* A user with a poor card that fails to ack the reset, or that does not have a valid 0x57,0x57 signature can still use this @@ -350,10 +343,10 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { if (bad_card) { - pr_cont(" (warning: no reset ack)"); + printk(" (warning: no reset ack)"); break; } else { - pr_cont(" not found (no reset ack).\n"); + printk(" not found (no reset ack).\n"); ret = -ENODEV; goto err_out; } @@ -461,13 +454,13 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } if (bad_clone_list[i].name8 == NULL) { - pr_cont(" not found (invalid signature %2.2x %2.2x).\n", + printk(" not found (invalid signature %2.2x %2.2x).\n", SA_prom[14], SA_prom[15]); ret = -ENXIO; goto err_out; } #else - pr_cont(" not found.\n"); + printk(" not found.\n"); ret = -ENXIO; goto err_out; #endif @@ -483,15 +476,15 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) mdelay(10); /* wait 10ms for interrupt to propagate */ outb_p(0x00, ioaddr + EN0_IMR); /* Mask it again. */ dev->irq = probe_irq_off(cookie); - if (netif_msg_probe(ei_local)) - pr_cont(" autoirq is %d", dev->irq); + if (ei_debug > 2) + printk(" autoirq is %d\n", dev->irq); } else if (dev->irq == 2) /* Fixup for users that don't know that IRQ 2 is really IRQ 9, or don't know which one to set. */ dev->irq = 9; if (! dev->irq) { - pr_cont(" failed to detect IRQ line.\n"); + printk(" failed to detect IRQ line.\n"); ret = -EAGAIN; goto err_out; } @@ -500,7 +493,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) share and the board will usually be enabled. */ ret = request_irq(dev->irq, eip_interrupt, 0, name, dev); if (ret) { - pr_cont(" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); + printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret); goto err_out; } @@ -519,7 +512,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) } #endif - pr_cont("%pM\n", dev->dev_addr); + printk("%pM\n", dev->dev_addr); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -543,12 +536,11 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) dev->netdev_ops = &eip_netdev_ops; NS8390p_init(dev, 0); - ei_local->msg_enable = ne_msg_enable; ret = register_netdev(dev); if (ret) goto out_irq; - netdev_info(dev, "%s found at %#lx, using IRQ %d.\n", - name, ioaddr, dev->irq); + printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n", + dev->name, name, ioaddr, dev->irq); return 0; out_irq: @@ -564,9 +556,9 @@ err_out: static void ne_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", jiffies); + if (ei_debug > 1) + printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies); /* DON'T change these to inb_p/outb_p or reset will fail on clones. */ outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -577,7 +569,7 @@ static void ne_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (time_after(jiffies, reset_start_time + 2*HZ/100)) { - netdev_err(dev, "ne_reset_8390() did not complete.\n"); + printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name); break; } outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -595,9 +587,9 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, i if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_get_8390_hdr " - "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr " + "[DMAstat:%d][irqlock:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } @@ -629,7 +621,6 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk { #ifdef NE_SANITY_CHECK int xfer_count = count; - struct ei_device *ei_local = netdev_priv(dev); #endif int nic_base = dev->base_addr; char *buf = skb->data; @@ -637,9 +628,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_input " - "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_block_input " + "[DMAstat:%d][irqlock:%d].\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -669,7 +660,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk this message you either 1) have a slightly incompatible clone or 2) have noise/speed problems with your bus. */ - if (netif_msg_rx_status(ei_local)) + if (ei_debug > 1) { /* DMA termination address check... */ int addr, tries = 20; @@ -683,9 +674,9 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk break; } while (--tries > 0); if (tries <= 0) - netdev_warn(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + printk(KERN_WARNING "%s: RX transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + dev->name, ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -699,7 +690,6 @@ static void ne_block_output(struct net_device *dev, int count, unsigned long dma_start; #ifdef NE_SANITY_CHECK int retries = 0; - struct ei_device *ei_local = netdev_priv(dev); #endif /* Round the count up for word writes. Do we need to do this? @@ -712,9 +702,9 @@ static void ne_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne_block_output." - "[DMAstat:%d][irqlock:%d]\n", - ei_status.dmaing, ei_status.irqlock); + printk(KERN_EMERG "%s: DMAing conflict in ne_block_output." + "[DMAstat:%d][irqlock:%d]\n", + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -761,7 +751,7 @@ retry: /* This was for the ALPHA version only, but enough people have been encountering problems so it is still here. */ - if (netif_msg_tx_queued(ei_local)) + if (ei_debug > 1) { /* DMA termination address check... */ int addr, tries = 20; @@ -775,9 +765,9 @@ retry: if (tries <= 0) { - netdev_warn(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + printk(KERN_WARNING "%s: Tx packet transfer address mismatch," + "%#4.4x (expected) vs. %#4.4x (actual).\n", + dev->name, (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -786,7 +776,7 @@ retry: while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); NS8390p_init(dev, 1); break; @@ -946,8 +936,8 @@ int __init init_module(void) retval = platform_driver_probe(&ne_driver, ne_drv_probe); if (retval) { if (io[0] == 0) - pr_notice("ne.c: You must supply \"io=0xNNN\"" - " value(s) for ISA cards.\n"); + printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\"" + " value(s) for ISA cards.\n"); ne_loop_rm_unreg(1); return retval; } diff --git a/drivers/net/ethernet/8390/ne2k-pci.c b/drivers/net/ethernet/8390/ne2k-pci.c index f395c967262e..fc14a85e4d5f 100644 --- a/drivers/net/ethernet/8390/ne2k-pci.c +++ b/drivers/net/ethernet/8390/ne2k-pci.c @@ -33,6 +33,8 @@ /* The user-configurable values. These may be modified when a driver module is loaded.*/ +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ + #define MAX_UNITS 8 /* More are supported, limit only on options */ /* Used to pass the full-duplex flag, etc. */ static int full_duplex[MAX_UNITS]; @@ -58,8 +60,6 @@ static int options[MAX_UNITS]; #include "8390.h" -static u32 ne2k_msg_enable; - /* These identify the driver base version and may not be removed. */ static const char version[] = KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE @@ -76,10 +76,10 @@ MODULE_AUTHOR("Donald Becker / Paul Gortmaker"); MODULE_DESCRIPTION("PCI NE2000 clone driver"); MODULE_LICENSE("GPL"); -module_param_named(msg_enable, ne2k_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); +module_param(debug, int, 0); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); +MODULE_PARM_DESC(debug, "debug level (1-2)"); MODULE_PARM_DESC(options, "Bit 5: full duplex"); MODULE_PARM_DESC(full_duplex, "full duplex setting(s) (1)"); @@ -226,7 +226,6 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, static unsigned int fnd_cnt; long ioaddr; int flags = pci_clone_list[chip_idx].flags; - struct ei_device *ei_local; /* when built into the kernel, we only print version if device is found */ #ifndef MODULE @@ -281,8 +280,6 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, goto err_out_free_res; } dev->netdev_ops = &ne2k_netdev_ops; - ei_local = netdev_priv(dev); - ei_local->msg_enable = ne2k_msg_enable; SET_NETDEV_DEV(dev, &pdev->dev); @@ -382,9 +379,9 @@ static int ne2k_pci_init_one(struct pci_dev *pdev, if (i) goto err_out_free_netdev; - netdev_info(dev, "%s found at %#lx, IRQ %d, %pM.\n", - pci_clone_list[chip_idx].name, ioaddr, dev->irq, - dev->dev_addr); + printk("%s: %s found at %#lx, IRQ %d, %pM.\n", + dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, + dev->dev_addr); return 0; @@ -453,10 +450,9 @@ static int ne2k_pci_close(struct net_device *dev) static void ne2k_pci_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting the 8390 t=%ld...\n", - jiffies); + if (debug > 1) printk("%s: Resetting the 8390 t=%ld...", + dev->name, jiffies); outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -466,7 +462,7 @@ static void ne2k_pci_reset_8390(struct net_device *dev) /* This check _should_not_ be necessary, omit eventually. */ while ((inb(NE_BASE+EN0_ISR) & ENISR_RESET) == 0) if (jiffies - reset_start_time > 2) { - netdev_err(dev, "ne2k_pci_reset_8390() did not complete.\n"); + printk("%s: ne2k_pci_reset_8390() did not complete.\n", dev->name); break; } outb(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */ @@ -483,9 +479,9 @@ static void ne2k_pci_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr * /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_get_8390_hdr " + printk("%s: DMAing conflict in ne2k_pci_get_8390_hdr " "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } @@ -521,9 +517,9 @@ static void ne2k_pci_block_input(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_block_input " + printk("%s: DMAing conflict in ne2k_pci_block_input " "[DMAstat:%d][irqlock:%d].\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -576,9 +572,9 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, /* This *shouldn't* happen. If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in ne2k_pci_block_output." + printk("%s: DMAing conflict in ne2k_pci_block_output." "[DMAstat:%d][irqlock:%d]\n", - ei_status.dmaing, ei_status.irqlock); + dev->name, ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -623,7 +619,7 @@ static void ne2k_pci_block_output(struct net_device *dev, int count, while ((inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (jiffies - dma_start > 2) { /* Avoid clock roll-over. */ - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); + printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne2k_pci_reset_8390(dev); NS8390_init(dev,1); break; @@ -644,24 +640,8 @@ static void ne2k_pci_get_drvinfo(struct net_device *dev, strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); } -static u32 ne2k_pci_get_msglevel(struct net_device *dev) -{ - struct ei_device *ei_local = netdev_priv(dev); - - return ei_local->msg_enable; -} - -static void ne2k_pci_set_msglevel(struct net_device *dev, u32 v) -{ - struct ei_device *ei_local = netdev_priv(dev); - - ei_local->msg_enable = v; -} - static const struct ethtool_ops ne2k_pci_ethtool_ops = { .get_drvinfo = ne2k_pci_get_drvinfo, - .get_msglevel = ne2k_pci_get_msglevel, - .set_msglevel = ne2k_pci_set_msglevel, }; static void ne2k_pci_remove_one(struct pci_dev *pdev) diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c index eea33d667fb0..46c5aadaca8e 100644 --- a/drivers/net/ethernet/8390/pcnet_cs.c +++ b/drivers/net/ethernet/8390/pcnet_cs.c @@ -67,7 +67,7 @@ #define PCNET_RDC_TIMEOUT (2*HZ/100) /* Max wait in jiffies for Tx RDC */ static const char *if_names[] = { "auto", "10baseT", "10base2"}; -static u32 pcnet_msg_enable; + /*====================================================================*/ @@ -558,7 +558,6 @@ static int pcnet_config(struct pcmcia_device *link) int start_pg, stop_pg, cm_offset; int has_shmem = 0; hw_info_t *local_hw_info; - struct ei_device *ei_local; dev_dbg(&link->dev, "pcnet_config\n"); @@ -608,8 +607,6 @@ static int pcnet_config(struct pcmcia_device *link) mii_phy_probe(dev); SET_NETDEV_DEV(dev, &link->dev); - ei_local = netdev_priv(dev); - ei_local->msg_enable = pcnet_msg_enable; if (register_netdev(dev) != 0) { pr_notice("register_netdev() failed\n"); @@ -619,7 +616,7 @@ static int pcnet_config(struct pcmcia_device *link) if (info->flags & (IS_DL10019|IS_DL10022)) { u_char id = inb(dev->base_addr + 0x1a); netdev_info(dev, "NE2000 (DL100%d rev %02x): ", - (info->flags & IS_DL10022) ? 22 : 19, id); + (info->flags & IS_DL10022) ? 22 : 19, id); if (info->pna_phy) pr_cont("PNA, "); } else { @@ -1066,9 +1063,9 @@ static void ei_watchdog(u_long arg) if (info->phy_id == info->eth_phy) { if (p) netdev_info(dev, "autonegotiation complete: " - "%sbaseT-%cD selected\n", - ((p & 0x0180) ? "100" : "10"), - ((p & 0x0140) ? 'F' : 'H')); + "%sbaseT-%cD selected\n", + ((p & 0x0180) ? "100" : "10"), + ((p & 0x0140) ? 'F' : 'H')); else netdev_info(dev, "link partner did not autonegotiate\n"); } @@ -1084,7 +1081,7 @@ static void ei_watchdog(u_long arg) mdio_write(mii_addr, info->phy_id, 0, 0x0400); info->phy_id ^= info->pna_phy ^ info->eth_phy; netdev_info(dev, "switched to %s transceiver\n", - (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); + (info->phy_id == info->eth_phy) ? "ethernet" : "PNA"); mdio_write(mii_addr, info->phy_id, 0, (info->phy_id == info->eth_phy) ? 0x1000 : 0); info->link_status = 0; @@ -1131,9 +1128,9 @@ static void dma_get_8390_hdr(struct net_device *dev, unsigned int nic_base = dev->base_addr; if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } @@ -1162,14 +1159,13 @@ static void dma_block_input(struct net_device *dev, int count, unsigned int nic_base = dev->base_addr; int xfer_count = count; char *buf = skb->data; - struct ei_device *ei_local = netdev_priv(dev); - if ((netif_msg_rx_status(ei_local)) && (count != 4)) + if ((ei_debug > 4) && (count != 4)) netdev_dbg(dev, "[bi=%d]\n", count+4); if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_input." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_input." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1187,8 +1183,7 @@ static void dma_block_input(struct net_device *dev, int count, /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ #ifdef PCMCIA_DEBUG - /* DMA termination address check... */ - if (netif_msg_rx_status(ei_local)) { + if (ei_debug > 4) { /* DMA termination address check... */ int addr, tries = 20; do { /* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here @@ -1201,8 +1196,8 @@ static void dma_block_input(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) netdev_notice(dev, "RX transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - ring_offset + xfer_count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + ring_offset + xfer_count, addr); } #endif outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ @@ -1218,12 +1213,12 @@ static void dma_block_output(struct net_device *dev, int count, pcnet_dev_t *info = PRIV(dev); #ifdef PCMCIA_DEBUG int retries = 0; - struct ei_device *ei_local = netdev_priv(dev); #endif u_long dma_start; #ifdef PCMCIA_DEBUG - netif_dbg(ei_local, tx_queued, dev, "[bo=%d]\n", count); + if (ei_debug > 4) + netdev_dbg(dev, "[bo=%d]\n", count); #endif /* Round the count up for word writes. Do we need to do this? @@ -1232,9 +1227,9 @@ static void dma_block_output(struct net_device *dev, int count, if (count & 0x01) count++; if (ei_status.dmaing) { - netdev_err(dev, "DMAing conflict in dma_block_output." - "[DMAstat:%1x][irqlock:%1x]\n", - ei_status.dmaing, ei_status.irqlock); + netdev_notice(dev, "DMAing conflict in dma_block_output." + "[DMAstat:%1x][irqlock:%1x]\n", + ei_status.dmaing, ei_status.irqlock); return; } ei_status.dmaing |= 0x01; @@ -1261,8 +1256,7 @@ static void dma_block_output(struct net_device *dev, int count, #ifdef PCMCIA_DEBUG /* This was for the ALPHA version only, but enough people have been encountering problems that it is still here. */ - /* DMA termination address check... */ - if (netif_msg_tx_queued(ei_local)) { + if (ei_debug > 4) { /* DMA termination address check... */ int addr, tries = 20; do { int high = inb_p(nic_base + EN0_RSARHI); @@ -1273,8 +1267,8 @@ static void dma_block_output(struct net_device *dev, int count, } while (--tries > 0); if (tries <= 0) { netdev_notice(dev, "Tx packet transfer address mismatch," - "%#4.4x (expected) vs. %#4.4x (actual).\n", - (start_page << 8) + count, addr); + "%#4.4x (expected) vs. %#4.4x (actual).\n", + (start_page << 8) + count, addr); if (retries++ == 0) goto retry; } @@ -1283,10 +1277,10 @@ static void dma_block_output(struct net_device *dev, int count, while ((inb_p(nic_base + EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + PCNET_RDC_TIMEOUT)) { - netdev_warn(dev, "timeout waiting for Tx RDC.\n"); - pcnet_reset_8390(dev); - NS8390_init(dev, 1); - break; + netdev_notice(dev, "timeout waiting for Tx RDC.\n"); + pcnet_reset_8390(dev); + NS8390_init(dev, 1); + break; } outb_p(ENISR_RDC, nic_base + EN0_ISR); /* Ack intr. */ diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c index 139385dcdaa7..b0fbce39661a 100644 --- a/drivers/net/ethernet/8390/smc-ultra.c +++ b/drivers/net/ethernet/8390/smc-ultra.c @@ -111,7 +111,6 @@ static struct isapnp_device_id ultra_device_ids[] __initdata = { MODULE_DEVICE_TABLE(isapnp, ultra_device_ids); #endif -static u32 ultra_msg_enable; #define START_PG 0x00 /* First page of TX buffer */ @@ -212,7 +211,6 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) unsigned char num_pages, irqreg, addr, piomode; unsigned char idreg = inb(ioaddr + 7); unsigned char reg4 = inb(ioaddr + 4) & 0x7f; - struct ei_device *ei_local = netdev_priv(dev); if (!request_region(ioaddr, ULTRA_IO_EXTENT, DRV_NAME)) return -EBUSY; @@ -234,16 +232,16 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) goto out; } - if ((ultra_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ"; for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - netdev_info(dev, "%s at %#3x, %pM", model_name, - ioaddr, dev->dev_addr); + printk("%s: %s at %#3x, %pM", dev->name, model_name, + ioaddr, dev->dev_addr); /* Switch from the station address to the alternate register set and read the useful registers there. */ @@ -267,7 +265,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)]; if (irq == 0) { - pr_cont(", failed to detect IRQ line.\n"); + printk(", failed to detect IRQ line.\n"); retval = -EAGAIN; goto out; } @@ -298,7 +296,7 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) ei_status.mem = ioremap(dev->mem_start, (ei_status.stop_page - START_PG)*256); if (!ei_status.mem) { - pr_cont(", failed to ioremap.\n"); + printk(", failed to ioremap.\n"); retval = -ENOMEM; goto out; } @@ -306,15 +304,14 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->mem_end = dev->mem_start + (ei_status.stop_page - START_PG)*256; if (piomode) { - pr_cont(", %s IRQ %d programmed-I/O mode.\n", - eeprom_irq ? "EEPROM" : "assigned ", dev->irq); + printk(",%s IRQ %d programmed-I/O mode.\n", + eeprom_irq ? "EEPROM" : "assigned ", dev->irq); ei_status.block_input = &ultra_pio_input; ei_status.block_output = &ultra_pio_output; ei_status.get_8390_hdr = &ultra_pio_get_hdr; } else { - pr_cont(", %s IRQ %d memory %#lx-%#lx.\n", - eeprom_irq ? "" : "assigned ", dev->irq, dev->mem_start, - dev->mem_end-1); + printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ", + dev->irq, dev->mem_start, dev->mem_end-1); ei_status.block_input = &ultra_block_input; ei_status.block_output = &ultra_block_output; ei_status.get_8390_hdr = &ultra_get_8390_hdr; @@ -323,7 +320,6 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &ultra_netdev_ops; NS8390_init(dev, 0); - ei_local->msg_enable = ultra_msg_enable; retval = register_netdev(dev); if (retval) @@ -360,15 +356,12 @@ static int __init ultra_probe_isapnp(struct net_device *dev) /* found it */ dev->base_addr = pnp_port_start(idev, 0); dev->irq = pnp_irq(idev, 0); - netdev_info(dev, - "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", - (char *) ultra_device_ids[i].driver_data, - dev->base_addr, dev->irq); + printk(KERN_INFO "smc-ultra.c: ISAPnP reports %s at i/o %#lx, irq %d.\n", + (char *) ultra_device_ids[i].driver_data, + dev->base_addr, dev->irq); if (ultra_probe1(dev, dev->base_addr) != 0) { /* Shouldn't happen. */ - netdev_err(dev, - "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", - dev->base_addr); - pnp_device_detach(idev); + printk(KERN_ERR "smc-ultra.c: Probe of ISAPnP card at %#lx failed.\n", dev->base_addr); + pnp_device_detach(idev); return -ENXIO; } ei_status.priv = (unsigned long)idev; @@ -419,10 +412,9 @@ static void ultra_reset_8390(struct net_device *dev) { int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */ - struct ei_device *ei_local = netdev_priv(dev); outb(ULTRA_RESET, cmd_port); - netif_dbg(ei_local, hw, dev, "resetting Ultra, t=%ld...\n", jiffies); + if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies); ei_status.txing = 0; outb(0x00, cmd_port); /* Disable shared memory for safety. */ @@ -432,7 +424,7 @@ ultra_reset_8390(struct net_device *dev) else outb(0x01, cmd_port + 6); /* Enable interrupts and memory. */ - netif_dbg(ei_local, hw, dev, "reset done\n"); + if (ei_debug > 1) printk("reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -538,11 +530,11 @@ static int ultra_close_card(struct net_device *dev) { int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); netif_stop_queue(dev); - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk("%s: Shutting down ethercard.\n", dev->name); outb(0x00, ioaddr + 6); /* Disable interrupts. */ free_irq(dev->irq, dev); @@ -564,10 +556,8 @@ static int irq[MAX_ULTRA_CARDS]; module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); -module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("SMC Ultra/EtherEZ ISA/PnP Ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/stnic.c b/drivers/net/ethernet/8390/stnic.c index aca957d4e121..8df4c4157230 100644 --- a/drivers/net/ethernet/8390/stnic.c +++ b/drivers/net/ethernet/8390/stnic.c @@ -69,11 +69,6 @@ static void stnic_block_output (struct net_device *dev, int count, static void stnic_init (struct net_device *dev); -static u32 stnic_msg_enable; - -module_param_named(msg_enable, stnic_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); - /* SH7750 specific read/write io. */ static inline void STNIC_DELAY (void) @@ -105,7 +100,6 @@ static int __init stnic_probe(void) { struct net_device *dev; int i, err; - struct ei_device *ei_local; /* If we are not running on a SolutionEngine, give up now */ if (! MACH_SE) @@ -131,10 +125,10 @@ static int __init stnic_probe(void) share and the board will usually be enabled. */ err = request_irq (dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (err) { - netdev_emerg(dev, " unable to get IRQ %d.\n", dev->irq); - free_netdev(dev); - return err; - } + printk (KERN_EMERG " unable to get IRQ %d.\n", dev->irq); + free_netdev(dev); + return err; + } ei_status.name = dev->name; ei_status.word16 = 1; @@ -153,8 +147,6 @@ static int __init stnic_probe(void) ei_status.block_output = &stnic_block_output; stnic_init (dev); - ei_local = netdev_priv(dev); - ei_local->msg_enable = stnic_msg_enable; err = register_netdev(dev); if (err) { @@ -164,7 +156,7 @@ static int __init stnic_probe(void) } stnic_dev = dev; - netdev_info(dev, "NS ST-NIC 83902A\n"); + printk (KERN_INFO "NS ST-NIC 83902A\n"); return 0; } @@ -172,11 +164,10 @@ static int __init stnic_probe(void) static void stnic_reset (struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - *(vhalf *) PA_83902_RST = 0; udelay (5); - netif_warn(ei_local, hw, dev, "8390 reset done (%ld).\n", jiffies); + if (ei_debug > 1) + printk (KERN_WARNING "8390 reset done (%ld).\n", jiffies); *(vhalf *) PA_83902_RST = ~0; udelay (5); } @@ -185,8 +176,6 @@ static void stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) { - struct ei_device *ei_local = netdev_priv(dev); - half buf[2]; STNIC_WRITE (PG0_RSAR0, 0); @@ -207,7 +196,8 @@ stnic_get_hdr (struct net_device *dev, struct e8390_pkt_hdr *hdr, hdr->count = ((buf[1] >> 8) & 0xff) | (buf[1] << 8); #endif - netif_dbg(ei_local, probe, dev, "ring %x status %02x next %02x count %04x.\n", + if (ei_debug > 1) + printk (KERN_DEBUG "ring %x status %02x next %02x count %04x.\n", ring_page, hdr->status, hdr->next, hdr->count); STNIC_WRITE (STNIC_CR, CR_RDMA | CR_PG0 | CR_STA); diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c index dd7d816bde52..03eb3eed49fa 100644 --- a/drivers/net/ethernet/8390/wd.c +++ b/drivers/net/ethernet/8390/wd.c @@ -60,7 +60,6 @@ static void wd_block_output(struct net_device *dev, int count, const unsigned char *buf, int start_page); static int wd_close(struct net_device *dev); -static u32 wd_msg_enable; #define WD_START_PG 0x00 /* First page of TX buffer */ #define WD03_STOP_PG 0x20 /* Last page +1 of RX ring */ @@ -171,7 +170,6 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) int word16 = 0; /* 0 = 8 bit, 1 = 16 bit */ const char *model_name; static unsigned version_printed; - struct ei_device *ei_local = netdev_priv(dev); for (i = 0; i < 8; i++) checksum += inb(ioaddr + 8 + i); @@ -182,19 +180,19 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) /* Check for semi-valid mem_start/end values if supplied. */ if ((dev->mem_start % 0x2000) || (dev->mem_end % 0x2000)) { - netdev_warn(dev, - "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); + printk(KERN_WARNING "wd.c: user supplied mem_start or mem_end not on 8kB boundary - ignored.\n"); dev->mem_start = 0; dev->mem_end = 0; } - if ((wd_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0)) - netdev_info(dev, version); + if (ei_debug && version_printed++ == 0) + printk(version); for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(ioaddr + 8 + i); - netdev_info(dev, "WD80x3 at %#3x, %pM", ioaddr, dev->dev_addr); + printk("%s: WD80x3 at %#3x, %pM", + dev->name, ioaddr, dev->dev_addr); /* The following PureData probe code was contributed by Mike Jagdis . Puredata does software @@ -246,9 +244,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) } #ifndef final_version if ( !ancient && (inb(ioaddr+1) & 0x01) != (word16 & 0x01)) - pr_cont("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", - word16 ? 16 : 8, - (inb(ioaddr+1) & 0x01) ? 16 : 8); + printk("\nWD80?3: Bus width conflict, %d (probe) != %d (reg report).", + word16 ? 16 : 8, (inb(ioaddr+1) & 0x01) ? 16 : 8); #endif } @@ -262,7 +259,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) if (reg0 == 0xff || reg0 == 0) { /* Future plan: this could check a few likely locations first. */ dev->mem_start = 0xd0000; - pr_cont(" assigning address %#lx", dev->mem_start); + printk(" assigning address %#lx", dev->mem_start); } else { int high_addr_bits = inb(ioaddr+WD_CMDREG5) & 0x1f; /* Some boards don't have the register 5 -- it returns 0xff. */ @@ -300,8 +297,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) outb_p(0x00, nic_addr+EN0_IMR); /* Mask all intrs. again. */ - if (netif_msg_drv(ei_local)) - pr_cont(" autoirq is %d", dev->irq); + if (ei_debug > 2) + printk(" autoirq is %d", dev->irq); if (dev->irq < 2) dev->irq = word16 ? 10 : 5; } else @@ -313,7 +310,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) share and the board will usually be enabled. */ i = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev); if (i) { - pr_cont(" unable to get IRQ %d.\n", dev->irq); + printk (" unable to get IRQ %d.\n", dev->irq); return i; } @@ -341,8 +338,8 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) return -ENOMEM; } - pr_cont(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", - model_name, dev->irq, dev->mem_start, dev->mem_end-1); + printk(" %s, IRQ %d, shared memory at %#lx-%#lx.\n", + model_name, dev->irq, dev->mem_start, dev->mem_end-1); ei_status.reset_8390 = wd_reset_8390; ei_status.block_input = wd_block_input; @@ -351,7 +348,6 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &wd_netdev_ops; NS8390_init(dev, 0); - ei_local->msg_enable = wd_msg_enable; #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ @@ -389,11 +385,9 @@ static void wd_reset_8390(struct net_device *dev) { int wd_cmd_port = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); outb(WD_RESET, wd_cmd_port); - netif_dbg(ei_local, hw, dev, "resetting the WD80x3 t=%lu...\n", - jiffies); + if (ei_debug > 1) printk("resetting the WD80x3 t=%lu...", jiffies); ei_status.txing = 0; /* Set up the ASIC registers, just in case something changed them. */ @@ -401,7 +395,7 @@ wd_reset_8390(struct net_device *dev) if (ei_status.word16) outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); - netif_dbg(ei_local, hw, dev, "reset done\n"); + if (ei_debug > 1) printk("reset done\n"); } /* Grab the 8390 specific header. Similar to the block_input routine, but @@ -480,9 +474,9 @@ static int wd_close(struct net_device *dev) { int wd_cmdreg = dev->base_addr - WD_NIC_OFFSET; /* WD_CMDREG */ - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard.\n"); + if (ei_debug > 1) + printk("%s: Shutting down ethercard.\n", dev->name); ei_close(dev); /* Change from 16-bit to 8-bit shared memory so reboot works. */ @@ -508,12 +502,10 @@ module_param_array(io, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param_array(mem, int, NULL, 0); module_param_array(mem_end, int, NULL, 0); -module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH)); MODULE_PARM_DESC(io, "I/O base address(es)"); MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)"); MODULE_PARM_DESC(mem, "memory base address(es)(ignored for PureData boards)"); MODULE_PARM_DESC(mem_end, "memory end address(es)"); -MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); MODULE_DESCRIPTION("ISA Western Digital wd8003/wd8013 ; SMC Elite, Elite16 ethernet driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c index 7b373e65f377..85ec4c2d2645 100644 --- a/drivers/net/ethernet/8390/zorro8390.c +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -44,8 +44,6 @@ static const char version[] = "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; -static u32 zorro8390_msg_enable; - #include "lib8390.c" #define DRV_NAME "zorro8390" @@ -88,9 +86,9 @@ static struct card_info { static void zorro8390_reset_8390(struct net_device *dev) { unsigned long reset_start_time = jiffies; - struct ei_device *ei_local = netdev_priv(dev); - netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); + if (ei_debug > 1) + netdev_dbg(dev, "resetting - t=%ld...\n", jiffies); z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); @@ -121,9 +119,8 @@ static void zorro8390_get_8390_hdr(struct net_device *dev, * If it does, it's the last thing you'll see */ if (ei_status.dmaing) { - netdev_warn(dev, - "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", - __func__, ei_status.dmaing, ei_status.irqlock); + netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); return; } @@ -233,7 +230,7 @@ static void zorro8390_block_output(struct net_device *dev, int count, while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */ - netdev_warn(dev, "timeout waiting for Tx RDC\n"); + netdev_err(dev, "timeout waiting for Tx RDC\n"); zorro8390_reset_8390(dev); __NS8390_init(dev, 1); break; @@ -251,9 +248,8 @@ static int zorro8390_open(struct net_device *dev) static int zorro8390_close(struct net_device *dev) { - struct ei_device *ei_local = netdev_priv(dev); - - netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); + if (ei_debug > 1) + netdev_dbg(dev, "Shutting down ethercard\n"); __ei_close(dev); return 0; } @@ -297,7 +293,6 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, int err; unsigned char SA_prom[32]; int start_page, stop_page; - struct ei_device *ei_local = netdev_priv(dev); static u32 zorro8390_offsets[16] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, @@ -388,9 +383,6 @@ static int zorro8390_init(struct net_device *dev, unsigned long board, dev->netdev_ops = &zorro8390_netdev_ops; __NS8390_init(dev, 0); - - ei_local->msg_enable = zorro8390_msg_enable; - err = register_netdev(dev); if (err) { free_irq(IRQ_AMIGA_PORTS, dev); -- cgit v1.2.3 From a1bf1750871a6f242b0fdb174cc55d2c57e7ed66 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Wed, 11 Dec 2013 23:50:52 +0100 Subject: net:fec: remove duplicate lines in comment about errata ERR006358 commit 031916568a1aa2ef1809f86d26f0bcfa215ff5c0 worked around errata ERR006358, but comment contains duplicated lines, impairing the readability. Remove them. Signed-off-by: Philippe De Muyter Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 73b000df8a08..e7c8b749c5a5 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -98,10 +98,6 @@ static void set_multicast_list(struct net_device *ndev); * detected as not set during a prior frame transmission, then the * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in - * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously - * detected as not set during a prior frame transmission, then the - * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs - * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in * frames not being transmitted until there is a 0-to-1 transition on * ENET_TDAR[TDAR]. */ -- cgit v1.2.3 From f280e89ad6a29d9969cb6b216123c798e1689bc4 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Wed, 11 Dec 2013 22:09:05 -0600 Subject: drivers: net: cpsw: fix for cpsw crash when build as modules When CPSW and Davinci MDIO are build as modules, CPSW crashes when accessing CPSW registers in CPSW probe. The same is working in built-in as the CPSW clocks are enabled in Davindi MDIO probe, SO Enabling the clocks before accessing the version register and moving out the other register access to cpsw device open. Signed-off-by: Mugunthan V N Signed-off-by: Felipe Balbi Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index a91f0c9d4511..5120d9ce1dd4 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1151,6 +1151,12 @@ static int cpsw_ndo_open(struct net_device *ndev) * receive descs */ cpsw_info(priv, ifup, "submitted %d rx descriptors\n", i); + + if (cpts_register(&priv->pdev->dev, priv->cpts, + priv->data.cpts_clock_mult, + priv->data.cpts_clock_shift)) + dev_err(priv->dev, "error registering cpts device\n"); + } /* Enable Interrupt pacing if configured */ @@ -1197,6 +1203,7 @@ static int cpsw_ndo_stop(struct net_device *ndev) netif_carrier_off(priv->ndev); if (cpsw_common_res_usage_state(priv) <= 1) { + cpts_unregister(priv->cpts); cpsw_intr_disable(priv); cpdma_ctlr_int_ctrl(priv->dma, false); cpdma_ctlr_stop(priv->dma); @@ -1985,9 +1992,15 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_runtime_disable_ret; } priv->regs = ss_regs; - priv->version = __raw_readl(&priv->regs->id_ver); priv->host_port = HOST_PORT_NUM; + /* Need to enable clocks with runtime PM api to access module + * registers + */ + pm_runtime_get_sync(&pdev->dev); + priv->version = readl(&priv->regs->id_ver); + pm_runtime_put_sync(&pdev->dev); + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); priv->wr_regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(priv->wr_regs)) { @@ -2157,8 +2170,6 @@ static int cpsw_remove(struct platform_device *pdev) unregister_netdev(cpsw_get_slave_ndev(priv, 1)); unregister_netdev(ndev); - cpts_unregister(priv->cpts); - cpsw_ale_destroy(priv->ale); cpdma_chan_destroy(priv->txch); cpdma_chan_destroy(priv->rxch); -- cgit v1.2.3 From 3c325ced6aefa72d43a54e324df7562564c26f91 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Sat, 14 Dec 2013 03:26:45 -0800 Subject: i40e: fix null dereference If the vsi->tx_rings structure is NULL we don't want to panic. Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10 Signed-off-by: Jesse Brandeburg Tested-by: Kavindya Deegala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/i40e/i40e_main.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index be15938ba213..12b0932204ba 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -354,6 +354,9 @@ static struct rtnl_link_stats64 *i40e_get_netdev_stats_struct( struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi); int i; + if (!vsi->tx_rings) + return stats; + rcu_read_lock(); for (i = 0; i < vsi->num_queue_pairs; i++) { struct i40e_ring *tx_ring, *rx_ring; -- cgit v1.2.3 From df29df92adda751ac04ca5149d30014b5199db81 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Sat, 14 Dec 2013 03:26:46 -0800 Subject: igb: Fix for issue where values could be too high for udelay function. This patch changes the igb_phy_has_link function to check the value of the parameter before deciding to use udelay or mdelay in order to be sure that the value is not too high for udelay function. CC: stable kernel # 3.9+ Signed-off-by: Sunil K Pandey Signed-off-by: Kevin B Smith Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/e1000_phy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c index c4c4fe332c7e..ad2b74d95138 100644 --- a/drivers/net/ethernet/intel/igb/e1000_phy.c +++ b/drivers/net/ethernet/intel/igb/e1000_phy.c @@ -1728,7 +1728,10 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ - udelay(usec_interval); + if (usec_interval >= 1000) + mdelay(usec_interval/1000); + else + udelay(usec_interval); } ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); if (ret_val) -- cgit v1.2.3 From b84caae486135d588fb200973b0be8cb8a511edf Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:56 -0500 Subject: qlcnic: Fix usage of netif_tx_{wake, stop} api during link change. o Driver was using netif_tx_{stop,wake}_all_queues() api during link change event. Remove these api calls to manage queue start/stop event, as core networking stack will manage this based on netif_carrier_{on,off} call. These API's were modified as part of commit id 012ec81223aa45d2b80aeafb77392fd1a19c7b10 ("qlcnic: Multi Tx queue support for 82xx Series adapter.") Signed-off-by: Shahed Shaikh Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 0149c9495347..eda6c691d897 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -687,17 +687,11 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup) if (adapter->ahw->linkup && !linkup) { netdev_info(netdev, "NIC Link is down\n"); adapter->ahw->linkup = 0; - if (netif_running(netdev)) { - netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); - } + netif_carrier_off(netdev); } else if (!adapter->ahw->linkup && linkup) { netdev_info(netdev, "NIC Link is up\n"); adapter->ahw->linkup = 1; - if (netif_running(netdev)) { - netif_carrier_on(netdev); - netif_wake_queue(netdev); - } + netif_carrier_on(netdev); } } -- cgit v1.2.3 From 3bf517df0d99f1cf5d369c73ab68e0afe6a3c2f9 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:57 -0500 Subject: qlcnic: Fix diagnostic test for all adapters. o Driver should re-allocate all Tx queues after completing diagnostic tests. This regression was added by commit id c2c5e3a0681bb1945c0cb211a5f4baa22cb2cbb3 ("qlcnic: Enable diagnostic test for multiple Tx queues.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 ++ drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 - 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index b36c02fafcfd..6d3edf6b6a96 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -948,6 +948,7 @@ static int qlcnic_irq_test(struct net_device *netdev) struct qlcnic_hardware_context *ahw = adapter->ahw; struct qlcnic_cmd_args cmd; int ret, drv_sds_rings = adapter->drv_sds_rings; + int drv_tx_rings = adapter->drv_tx_rings; if (qlcnic_83xx_check(adapter)) return qlcnic_83xx_interrupt_test(netdev); @@ -980,6 +981,7 @@ free_diag_res: clear_diag_irq: adapter->drv_sds_rings = drv_sds_rings; + adapter->drv_tx_rings = drv_tx_rings; clear_bit(__QLCNIC_RESETTING, &adapter->state); return ret; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 05c1eef8df13..aa019c398e9b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1940,7 +1940,6 @@ int qlcnic_diag_alloc_res(struct net_device *netdev, int test) qlcnic_detach(adapter); adapter->drv_sds_rings = QLCNIC_SINGLE_RING; - adapter->drv_tx_rings = QLCNIC_SINGLE_RING; adapter->ahw->diag_test = test; adapter->ahw->linkup = 0; -- cgit v1.2.3 From f9566265d7b44fea789072dcfa9a454e7e433af6 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:58 -0500 Subject: qlcnic: Fix TSS/RSS ring validation logic. o TSS/RSS ring validation does not take into account that either of these ring values can be 0. This patch fixes this validation and would fail set_channel operation if any of these ring value is 0. This regression was added as part of commit id 34e8c406fda5b5a9d2e126a92bab84cd28e3b5fa ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 4 ++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 6 +++++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 + 3 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 89208e5b25d6..fae1b7171576 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -2073,8 +2073,8 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter) ahw->nic_mode = QLCNIC_DEFAULT_MODE; adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver; ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry; - adapter->max_sds_rings = ahw->max_rx_ques; - adapter->max_tx_rings = ahw->max_tx_ques; + adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; + adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS; } else { return -EIO; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 6d3edf6b6a96..78f5e815139e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -667,9 +667,13 @@ qlcnic_set_ringparam(struct net_device *dev, static int qlcnic_validate_ring_count(struct qlcnic_adapter *adapter, u8 rx_ring, u8 tx_ring) { + if (rx_ring == 0 || tx_ring == 0) + return -EINVAL; + if (rx_ring != 0) { if (rx_ring > adapter->max_sds_rings) { - netdev_err(adapter->netdev, "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n", + netdev_err(adapter->netdev, + "Invalid ring count, SDS ring count %d should not be greater than max %d driver sds rings.\n", rx_ring, adapter->max_sds_rings); return -EINVAL; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index aa019c398e9b..2c8cac0c6a55 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1178,6 +1178,7 @@ qlcnic_initialize_nic(struct qlcnic_adapter *adapter) } else { adapter->ahw->nic_mode = QLCNIC_DEFAULT_MODE; adapter->max_tx_rings = QLCNIC_MAX_HW_TX_RINGS; + adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS; adapter->flags &= ~QLCNIC_ESWITCH_ENABLED; } -- cgit v1.2.3 From b17a44d8b86f48e34011b884a934231ae2928d66 Mon Sep 17 00:00:00 2001 From: Himanshu Madhani Date: Mon, 16 Dec 2013 15:36:59 -0500 Subject: qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter. o Current code was not allowing the user to configure more than one Tx ring using ethtool for 83xx/84xx adapter. This regression was introduced by commit id 18afc102fdcb95d6c7d57f2967a06f2f8fe3ba4c ("qlcnic: Enable multiple Tx queue support for 83xx/84xx Series adapter.") Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c index 78f5e815139e..e3be2760665c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c @@ -680,21 +680,12 @@ static int qlcnic_validate_ring_count(struct qlcnic_adapter *adapter, } if (tx_ring != 0) { - if (qlcnic_82xx_check(adapter) && - (tx_ring > adapter->max_tx_rings)) { + if (tx_ring > adapter->max_tx_rings) { netdev_err(adapter->netdev, "Invalid ring count, Tx ring count %d should not be greater than max %d driver Tx rings.\n", tx_ring, adapter->max_tx_rings); return -EINVAL; } - - if (qlcnic_83xx_check(adapter) && - (tx_ring > QLCNIC_SINGLE_RING)) { - netdev_err(adapter->netdev, - "Invalid ring count, Tx ring count %d should not be greater than %d driver Tx rings.\n", - tx_ring, QLCNIC_SINGLE_RING); - return -EINVAL; - } } return 0; -- cgit v1.2.3 From 3fc38e267bfbea5e33e2222d6babc3b06c2bb642 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 16 Dec 2013 15:37:00 -0500 Subject: qlcnic: Fix memory allocation o Use vzalloc() instead of kzalloc() for allocation of bootloader size memory. kzalloc() may fail to allocate the size of bootloader Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index fae1b7171576..cac0503bda31 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1254,24 +1254,24 @@ static int qlcnic_83xx_copy_bootloader(struct qlcnic_adapter *adapter) if (size & 0xF) size = (size + 16) & ~0xF; - p_cache = kzalloc(size, GFP_KERNEL); + p_cache = vzalloc(size); if (p_cache == NULL) return -ENOMEM; ret = qlcnic_83xx_lockless_flash_read32(adapter, src, p_cache, size / sizeof(u32)); if (ret) { - kfree(p_cache); + vfree(p_cache); return ret; } /* 16 byte write to MS memory */ ret = qlcnic_83xx_ms_mem_write128(adapter, dest, (u32 *)p_cache, size / 16); if (ret) { - kfree(p_cache); + vfree(p_cache); return ret; } - kfree(p_cache); + vfree(p_cache); return ret; } -- cgit v1.2.3 From 30fa15f64e40c4cf037e3379e55c2323b5d992e2 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Mon, 16 Dec 2013 15:37:01 -0500 Subject: qlcnic: Allow firmware dump collection when auto firmware recovery is disabled o Allow driver to collect firmware dump, during a forced firmware dump operation, when auto firmware recovery is disabled. Also, during this operation, driver should not allow reset recovery to be performed. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 1 + .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 53 ++++++++++++++-------- 2 files changed, 35 insertions(+), 19 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h index 4cae6caa6bfa..a6a33508e401 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h @@ -662,4 +662,5 @@ pci_ers_result_t qlcnic_83xx_io_error_detected(struct pci_dev *, pci_channel_state_t); pci_ers_result_t qlcnic_83xx_io_slot_reset(struct pci_dev *); void qlcnic_83xx_io_resume(struct pci_dev *); +void qlcnic_83xx_stop_hw(struct qlcnic_adapter *); #endif diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index cac0503bda31..918e18ddf038 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -740,6 +740,7 @@ static int qlcnic_83xx_idc_unknown_state(struct qlcnic_adapter *adapter) adapter->ahw->idc.err_code = -EIO; dev_err(&adapter->pdev->dev, "%s: Device in unknown state\n", __func__); + clear_bit(__QLCNIC_RESETTING, &adapter->state); return 0; } @@ -818,7 +819,6 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) struct qlcnic_hardware_context *ahw = adapter->ahw; struct qlcnic_mailbox *mbx = ahw->mailbox; int ret = 0; - u32 owner; u32 val; /* Perform NIC configuration based ready state entry actions */ @@ -848,9 +848,9 @@ static int qlcnic_83xx_idc_ready_state(struct qlcnic_adapter *adapter) set_bit(__QLCNIC_RESETTING, &adapter->state); qlcnic_83xx_idc_enter_need_reset_state(adapter, 1); } else { - owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); - if (ahw->pci_func == owner) - qlcnic_dump_fw(adapter); + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 1); } return -EIO; } @@ -948,13 +948,26 @@ static int qlcnic_83xx_idc_need_quiesce_state(struct qlcnic_adapter *adapter) return 0; } -static int qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) +static void qlcnic_83xx_idc_failed_state(struct qlcnic_adapter *adapter) { - dev_err(&adapter->pdev->dev, "%s: please restart!!\n", __func__); + struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 val, owner; + + val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + owner = qlcnic_83xx_idc_find_reset_owner_id(adapter); + if (ahw->pci_func == owner) { + qlcnic_83xx_stop_hw(adapter); + qlcnic_dump_fw(adapter); + } + } + + netdev_warn(adapter->netdev, "%s: Reboot will be required to recover the adapter!!\n", + __func__); clear_bit(__QLCNIC_RESETTING, &adapter->state); - adapter->ahw->idc.err_code = -EIO; + ahw->idc.err_code = -EIO; - return 0; + return; } static int qlcnic_83xx_idc_quiesce_state(struct qlcnic_adapter *adapter) @@ -1063,12 +1076,6 @@ void qlcnic_83xx_idc_poll_dev_state(struct work_struct *work) adapter->ahw->idc.prev_state = adapter->ahw->idc.curr_state; qlcnic_83xx_periodic_tasks(adapter); - /* Do not reschedule if firmaware is in hanged state and auto - * recovery is disabled - */ - if ((adapter->flags & QLCNIC_FW_HANG) && !qlcnic_auto_fw_reset) - return; - /* Re-schedule the function */ if (test_bit(QLC_83XX_MODULE_LOADED, &adapter->ahw->idc.status)) qlcnic_schedule_work(adapter, qlcnic_83xx_idc_poll_dev_state, @@ -1219,10 +1226,10 @@ void qlcnic_83xx_idc_request_reset(struct qlcnic_adapter *adapter, u32 key) } val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); - if ((val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) || - !qlcnic_auto_fw_reset) { - dev_err(&adapter->pdev->dev, - "%s:failed, device in non reset mode\n", __func__); + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 0); qlcnic_83xx_unlock_driver(adapter); return; } @@ -1939,7 +1946,7 @@ static void qlcnic_83xx_exec_template_cmd(struct qlcnic_adapter *p_dev, p_dev->ahw->reset.seq_index = index; } -static void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) +void qlcnic_83xx_stop_hw(struct qlcnic_adapter *p_dev) { p_dev->ahw->reset.seq_index = 0; @@ -1994,6 +2001,14 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter) val = QLCRDX(adapter->ahw, QLC_83XX_IDC_CTRL); if (!(val & QLC_83XX_IDC_GRACEFULL_RESET)) qlcnic_dump_fw(adapter); + + if (val & QLC_83XX_IDC_DISABLE_FW_RESET_RECOVERY) { + netdev_info(adapter->netdev, "%s: Auto firmware recovery is disabled\n", + __func__); + qlcnic_83xx_idc_enter_failed_state(adapter, 1); + return err; + } + qlcnic_83xx_init_hw(adapter); if (qlcnic_83xx_copy_bootloader(adapter)) -- cgit v1.2.3 From e49df7947a48b04ee57ee0fa0c4110ef05024c4f Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Mon, 16 Dec 2013 15:37:02 -0500 Subject: qlcnic: Fix mailbox processing during diagnostic test o Do not enable mailbox polling in case of legacy interrupt. Process mailbox AEN/response from the interrupt. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 32 ++++------------------ 1 file changed, 6 insertions(+), 26 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index b1cb0ffb15c7..ab66e7f3e01e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -447,8 +447,9 @@ irqreturn_t qlcnic_83xx_intr(int irq, void *data) qlcnic_83xx_poll_process_aen(adapter); - if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) { - ahw->diag_cnt++; + if (ahw->diag_test) { + if (ahw->diag_test == QLCNIC_INTERRUPT_TEST) + ahw->diag_cnt++; qlcnic_83xx_enable_legacy_msix_mbx_intr(adapter); return IRQ_HANDLED; } @@ -1345,11 +1346,6 @@ static int qlcnic_83xx_diag_alloc_res(struct net_device *netdev, int test, } if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { - /* disable and free mailbox interrupt */ - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { - qlcnic_83xx_enable_mbx_poll(adapter); - qlcnic_83xx_free_mbx_intr(adapter); - } adapter->ahw->loopback_state = 0; adapter->ahw->hw_ops->setup_link_event(adapter, 1); } @@ -1363,33 +1359,20 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev, { struct qlcnic_adapter *adapter = netdev_priv(netdev); struct qlcnic_host_sds_ring *sds_ring; - int ring, err; + int ring; clear_bit(__QLCNIC_DEV_UP, &adapter->state); if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST) { for (ring = 0; ring < adapter->drv_sds_rings; ring++) { sds_ring = &adapter->recv_ctx->sds_rings[ring]; - qlcnic_83xx_disable_intr(adapter, sds_ring); - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_enable_mbx_poll(adapter); + if (adapter->flags & QLCNIC_MSIX_ENABLED) + qlcnic_83xx_disable_intr(adapter, sds_ring); } } qlcnic_fw_destroy_ctx(adapter); qlcnic_detach(adapter); - if (adapter->ahw->diag_test == QLCNIC_LOOPBACK_TEST) { - if (!(adapter->flags & QLCNIC_MSIX_ENABLED)) { - err = qlcnic_83xx_setup_mbx_intr(adapter); - qlcnic_83xx_disable_mbx_poll(adapter); - if (err) { - dev_err(&adapter->pdev->dev, - "%s: failed to setup mbx interrupt\n", - __func__); - goto out; - } - } - } adapter->ahw->diag_test = 0; adapter->drv_sds_rings = drv_sds_rings; @@ -1399,9 +1382,6 @@ static void qlcnic_83xx_diag_free_res(struct net_device *netdev, if (netif_running(netdev)) __qlcnic_up(adapter, netdev); - if (adapter->ahw->diag_test == QLCNIC_INTERRUPT_TEST && - !(adapter->flags & QLCNIC_MSIX_ENABLED)) - qlcnic_83xx_disable_mbx_poll(adapter); out: netif_device_attach(netdev); } -- cgit v1.2.3 From 0951c5c214e525185572204b587e3b6762d121f4 Mon Sep 17 00:00:00 2001 From: Manish chopra Date: Mon, 16 Dec 2013 15:37:03 -0500 Subject: qlcnic: Dump mailbox registers when mailbox command times out. Signed-off-by: Manish Chopra Signed-off-by: Himanshu Madhani Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index ab66e7f3e01e..6055d397a29e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3734,6 +3734,19 @@ static void qlcnic_83xx_decode_mbx_rsp(struct qlcnic_adapter *adapter, return; } +static inline void qlcnic_dump_mailbox_registers(struct qlcnic_adapter *adapter) +{ + struct qlcnic_hardware_context *ahw = adapter->ahw; + u32 offset; + + offset = QLCRDX(ahw, QLCNIC_DEF_INT_MASK); + dev_info(&adapter->pdev->dev, "Mbx interrupt mask=0x%x, Mbx interrupt enable=0x%x, Host mbx control=0x%x, Fw mbx control=0x%x", + readl(ahw->pci_base0 + offset), + QLCRDX(ahw, QLCNIC_MBX_INTR_ENBL), + QLCRDX(ahw, QLCNIC_HOST_MBX_CTRL), + QLCRDX(ahw, QLCNIC_FW_MBX_CTRL)); +} + static void qlcnic_83xx_mailbox_worker(struct work_struct *work) { struct qlcnic_mailbox *mbx = container_of(work, struct qlcnic_mailbox, @@ -3778,6 +3791,8 @@ static void qlcnic_83xx_mailbox_worker(struct work_struct *work) __func__, cmd->cmd_op, cmd->type, ahw->pci_func, ahw->op_mode); clear_bit(QLC_83XX_MBX_READY, &mbx->status); + qlcnic_dump_mailbox_registers(adapter); + qlcnic_83xx_get_mbx_data(adapter, cmd); qlcnic_dump_mbx(adapter, cmd); qlcnic_83xx_idc_request_reset(adapter, QLCNIC_FORCE_FW_DUMP_KEY); -- cgit v1.2.3