From 0fec65130b9f11a73d74f47025491f97f82ba070 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 5 May 2015 10:06:06 -0700 Subject: arcnet: com20020: Use arcnet_ routines Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_ equivalents. o Add new #defines for register offsets There is an register offset, 8, that is unnamed and used as-is. o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate o Create static inline com20020_set_subaddress for the SET_SUBADR macro There is an unused arcnet config entry CONFIGSA100_CT6001 which added a special #define BUS_ALIGN which was introduced but never used in fullhist git tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10. This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit bus by aligning addresses to 16 bit boundaries. Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from com20020.h to arcdevice.h. Signed-off-by: Joe Perches Signed-off-by: Michael Grzeschik --- drivers/net/arcnet/arcdevice.h | 22 +++++--- drivers/net/arcnet/com20020-isa.c | 14 +++--- drivers/net/arcnet/com20020-pci.c | 6 +-- drivers/net/arcnet/com20020.c | 103 +++++++++++++++++++++----------------- drivers/net/arcnet/com20020.h | 74 +++++++++------------------ drivers/net/arcnet/com20020_cs.c | 17 ++++--- 6 files changed, 114 insertions(+), 122 deletions(-) (limited to 'drivers/net/arcnet') diff --git a/drivers/net/arcnet/arcdevice.h b/drivers/net/arcnet/arcdevice.h index 95e7ed6781c3..4afa32b5e9f1 100644 --- a/drivers/net/arcnet/arcdevice.h +++ b/drivers/net/arcnet/arcdevice.h @@ -344,28 +344,34 @@ void arcnet_timeout(struct net_device *dev); /* I/O equivalents */ +#ifdef CONFIG_SA1100_CT6001 +#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ +#else +#define BUS_ALIGN 1 +#endif + /* addr and offset allow register like names to define the actual IO address. * A configuration option multiplies the offset for alignment. */ #define arcnet_inb(addr, offset) \ - inb((addr) + (offset)) + inb((addr) + BUS_ALIGN * (offset)) #define arcnet_outb(value, addr, offset) \ - outb(value, (addr) + (offset)) + outb(value, (addr) + BUS_ALIGN * (offset)) #define arcnet_insb(addr, offset, buffer, count) \ - insb((addr) + (offset), buffer, count) + insb((addr) + BUS_ALIGN * (offset), buffer, count) #define arcnet_outsb(addr, offset, buffer, count) \ - outsb((addr) + (offset), buffer, count) + outsb((addr) + BUS_ALIGN * (offset), buffer, count) #define arcnet_inw(addr, offset) \ - inw((addr) + (offset)) + inw((addr) + BUS_ALIGN * (offset)) #define arcnet_outw(value, addr, offset) \ - outw(value, (addr) + (offset)) + outw(value, (addr) + BUS_ALIGN * (offset)) #define arcnet_insw(addr, offset, buffer, count) \ - insw((addr) + (offset), buffer, count) + insw((addr) + BUS_ALIGN * (offset), buffer, count) #define arcnet_outsw(addr, offset, buffer, count) \ - outsw((addr) + (offset), buffer, count) + outsw((addr) + BUS_ALIGN * (offset), buffer, count) #endif /* __KERNEL__ */ #endif /* _LINUX_ARCDEVICE_H */ diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index ab5202b506a6..b9e9931353b2 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -67,7 +67,7 @@ static int __init com20020isa_probe(struct net_device *dev) ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1); return -ENXIO; } - if (ASTATUS() == 0xFF) { + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { arc_printk(D_NORMAL, dev, "IO address %x empty\n", ioaddr); err = -ENODEV; goto out; @@ -83,20 +83,20 @@ static int __init com20020isa_probe(struct net_device *dev) * we tell it to start receiving. */ arc_printk(D_INIT_REASONS, dev, "intmask was %02Xh\n", - inb(_INTMASK)); - outb(0, _INTMASK); + arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); udelay(1); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { arc_printk(D_INIT_REASONS, dev, "Autoprobe IRQ failed first time\n"); airqmask = probe_irq_on(); - outb(NORXflag, _INTMASK); + arcnet_outb(NORXflag, ioaddr, COM20020_REG_W_INTMASK); udelay(5); - outb(0, _INTMASK); + arcnet_outb(0, ioaddr, COM20020_REG_W_INTMASK); dev->irq = probe_irq_off(airqmask); if ((int)dev->irq <= 0) { arc_printk(D_NORMAL, dev, "Autoprobe IRQ failed.\n"); diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c index 1a75a6982031..9b8212663320 100644 --- a/drivers/net/arcnet/com20020-pci.c +++ b/drivers/net/arcnet/com20020-pci.c @@ -117,8 +117,8 @@ static int com20020pci_probe(struct pci_dev *pdev, * ARCNET controller needs * this access to detect bustype */ - outb(0x00, ioaddr + 1); - inb(ioaddr + 1); + arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND); + arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT); dev->base_addr = ioaddr; dev->dev_addr[0] = node; @@ -131,7 +131,7 @@ static int com20020pci_probe(struct pci_dev *pdev, lp->timeout = timeout; lp->hw.owner = THIS_MODULE; - if (ASTATUS() == 0xFF) { + if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) { pr_err("IO address %Xh is empty!\n", ioaddr); ret = -EIO; goto out_port; diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index ddd64bb87b58..d4162750a354 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -65,11 +65,13 @@ static void com20020_copy_from_card(struct net_device *dev, int bufnum, int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME(dev, "insb", count, insb(_MEMDATA, buf, count)); + TIME(dev, "insb", count, + arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } static void com20020_copy_to_card(struct net_device *dev, int bufnum, @@ -78,11 +80,12 @@ static void com20020_copy_to_card(struct net_device *dev, int bufnum, int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset; /* set up the address register */ - outb((ofs >> 8) | AUTOINCflag, _ADDR_HI); - outb(ofs & 0xff, _ADDR_LO); + arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); /* copy the data */ - TIME(dev, "outsb", count, outsb(_MEMDATA, buf, count)); + TIME(dev, "outsb", count, + arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count)); } /* Reset the card and check some basic stuff during the detection stage. */ @@ -91,7 +94,9 @@ int com20020_check(struct net_device *dev) int ioaddr = dev->base_addr, status; struct arcnet_local *lp = netdev_priv(dev); - ARCRESET0; + arcnet_outb(0x18 | 0x80, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(0x18 , ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime); lp->setup = lp->clockm ? 0 : (lp->clockp << 1); @@ -101,24 +106,24 @@ int com20020_check(struct net_device *dev) /* Enable P1Mode for backplane mode */ lp->setup = lp->setup | P1MODE; - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); if (lp->clockm != 0) { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(0x18, ioaddr, COM20020_REG_W_COMMAND); } lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2); /* set node ID to 0x42 (but transmitter is disabled, so it's okay) */ - SETCONF; - outb(0x42, ioaddr + BUS_ALIGN * 7); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG); - status = ASTATUS(); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) { arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status); @@ -127,20 +132,21 @@ int com20020_check(struct net_device *dev) arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status); /* Enable TX */ - outb(0x39, _CONFIG); - outb(inb(ioaddr + BUS_ALIGN * 8), ioaddr + BUS_ALIGN * 7); + arcnet_outb(0x39, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(arcnet_inb(ioaddr, 8), ioaddr, COM20020_REG_W_XREG); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); - - status = ASTATUS(); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); + status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS); arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n", status); /* Read first location of memory */ - outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(0, _ADDR_LO); + arcnet_outb(0 | RDDATAflag | AUTOINCflag, + ioaddr, COM20020_REG_W_ADDR_HI); + arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO); - status = inb(_MEMDATA); + status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA); if (status != TESTvalue) { arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n", status); @@ -156,8 +162,8 @@ static int com20020_set_hwaddr(struct net_device *dev, void *addr) struct sockaddr *hwaddr = addr; memcpy(dev->dev_addr, hwaddr->sa_data, 1); - SET_SUBADR(SUB_NODE); - outb(dev->dev_addr[0], _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_NODE); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); return 0; } @@ -194,24 +200,24 @@ int com20020_found(struct net_device *dev, int shared) /* FIXME: do this some other way! */ if (!dev->dev_addr[0]) - dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN * 8); + dev->dev_addr[0] = arcnet_inb(ioaddr, 8); - SET_SUBADR(SUB_SETUP1); - outb(lp->setup, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); if (lp->card_flags & ARC_CAN_10MBIT) { - SET_SUBADR(SUB_SETUP2); - outb(lp->setup2, _XREG); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP2); + arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG); /* must now write the magic "restart operation" command */ mdelay(1); - outb(0x18, _COMMAND); + arcnet_outb(0x18, ioaddr, COM20020_REG_W_COMMAND); } lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1; /* Default 0x38 + register: Node ID */ - SETCONF; - outb(dev->dev_addr[0], _XREG); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG); /* reserve the irq */ if (request_irq(dev->irq, arcnet_interrupt, shared, @@ -264,23 +270,26 @@ static int com20020_reset(struct net_device *dev, int really_reset) arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n", __FILE__, __LINE__, __func__, dev, lp, dev->name); arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", - dev->name, ASTATUS()); + dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS)); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2); /* power-up defaults */ - SETCONF; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); if (really_reset) { /* reset the card */ - ARCRESET; + arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */ } /* clear flags & end reset */ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); - ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear, + ioaddr, COM20020_REG_W_COMMAND); /* verify that the ARCnet signature byte is present */ arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); @@ -294,7 +303,8 @@ static int com20020_reset(struct net_device *dev, int really_reset) return 1; } /* enable extended (512-byte) packets */ - ACOMMAND(CONFIGcmd | EXTconf); + arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND); + arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__); /* done! return success. */ @@ -306,21 +316,22 @@ static void com20020_setmask(struct net_device *dev, int mask) u_int ioaddr = dev->base_addr; arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr); - AINTMASK(mask); + arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK); } static void com20020_command(struct net_device *dev, int cmd) { u_int ioaddr = dev->base_addr; - ACOMMAND(cmd); + arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND); } static int com20020_status(struct net_device *dev) { u_int ioaddr = dev->base_addr; - return ASTATUS() + (ADIAGSTATUS() << 8); + return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) + + (arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8); } static void com20020_close(struct net_device *dev) @@ -330,7 +341,7 @@ static void com20020_close(struct net_device *dev) /* disable transmitter */ lp->config &= ~TXENcfg; - SETCONF; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } /* Set or clear the multicast filter for this adaptor. @@ -349,16 +360,16 @@ static void com20020_set_mc_list(struct net_device *dev) /* Enable promiscuous mode */ if (!(lp->setup & PROMISCset)) arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup |= PROMISCset; - outb(lp->setup, _XREG); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } else { /* Disable promiscuous mode, use normal mode */ if ((lp->setup & PROMISCset)) arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n"); - SET_SUBADR(SUB_SETUP1); + com20020_set_subaddress(lp, ioaddr, SUB_SETUP1); lp->setup &= ~PROMISCset; - outb(lp->setup, _XREG); + arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG); } } diff --git a/drivers/net/arcnet/com20020.h b/drivers/net/arcnet/com20020.h index 85898995b234..ffb19464b607 100644 --- a/drivers/net/arcnet/com20020.h +++ b/drivers/net/arcnet/com20020.h @@ -1,6 +1,6 @@ /* * Linux ARCnet driver - COM20020 chipset support - function declarations - * + * * Written 1997 by David Woodhouse. * Written 1994-1999 by Avery Pennarun. * Derived from skeleton.c by Donald Becker. @@ -34,13 +34,6 @@ extern const struct net_device_ops com20020_netdev_ops; /* The number of low I/O ports used by the card. */ #define ARCNET_TOTAL_SIZE 8 -/* various register addresses */ -#ifdef CONFIG_SA1100_CT6001 -#define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */ -#else -#define BUS_ALIGN 1 -#endif - #define PLX_PCI_MAX_CARDS 2 struct com20020_pci_channel_map { @@ -71,17 +64,18 @@ struct com20020_dev { int index; }; -#define _INTMASK (ioaddr+BUS_ALIGN*0) /* writable */ -#define _STATUS (ioaddr+BUS_ALIGN*0) /* readable */ -#define _COMMAND (ioaddr+BUS_ALIGN*1) /* standard arcnet commands */ -#define _DIAGSTAT (ioaddr+BUS_ALIGN*1) /* diagnostic status register */ -#define _ADDR_HI (ioaddr+BUS_ALIGN*2) /* control registers for IO-mapped memory */ -#define _ADDR_LO (ioaddr+BUS_ALIGN*3) -#define _MEMDATA (ioaddr+BUS_ALIGN*4) /* data port for IO-mapped memory */ -#define _SUBADR (ioaddr+BUS_ALIGN*5) /* the extended port _XREG refers to */ -#define _CONFIG (ioaddr+BUS_ALIGN*6) /* configuration register */ -#define _XREG (ioaddr+BUS_ALIGN*7) /* extra registers (indexed by _CONFIG - or _SUBADR) */ +#define COM20020_REG_W_INTMASK 0 /* writable */ +#define COM20020_REG_R_STATUS 0 /* readable */ +#define COM20020_REG_W_COMMAND 1 /* standard arcnet commands */ +#define COM20020_REG_R_DIAGSTAT 1 /* diagnostic status */ +#define COM20020_REG_W_ADDR_HI 2 /* control for IO-mapped memory */ +#define COM20020_REG_W_ADDR_LO 3 +#define COM20020_REG_RW_MEMDATA 4 /* data port for IO-mapped memory */ +#define COM20020_REG_W_SUBADR 5 /* the extended port _XREG refers to */ +#define COM20020_REG_W_CONFIG 6 /* configuration */ +#define COM20020_REG_W_XREG 7 /* extra + * (indexed by _CONFIG or _SUBADDR) + */ /* in the ADDR_HI register */ #define RDDATAflag 0x80 /* next access is a read (not a write) */ @@ -109,37 +103,15 @@ struct com20020_dev { #define SUB_BUSCTL 5 /* bus control options */ #define SUB_DMACOUNT 6 /* DMA count options */ -#define SET_SUBADR(x) do { \ - if ((x) < 4) \ - { \ - lp->config = (lp->config & ~0x03) | (x); \ - SETCONF; \ - } \ - else \ - { \ - outb(x, _SUBADR); \ - } \ -} while (0) - -#undef ARCRESET -#undef ASTATUS -#undef ACOMMAND -#undef AINTMASK - -#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \ - udelay(5); \ - outb(lp->config , _CONFIG); \ - } -#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \ - udelay(5); \ - outb(0x18 , _CONFIG); \ - } - -#define ASTATUS() inb(_STATUS) -#define ADIAGSTATUS() inb(_DIAGSTAT) -#define ACOMMAND(cmd) outb((cmd),_COMMAND) -#define AINTMASK(msk) outb((msk),_INTMASK) - -#define SETCONF outb(lp->config, _CONFIG) +static inline void com20020_set_subaddress(struct arcnet_local *lp, + int ioaddr, int val) +{ + if (val < 4) { + lp->config = (lp->config & ~0x03) | val; + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); + } else { + arcnet_outb(val, ioaddr, COM20020_REG_W_SUBADR); + } +} #endif /* __COM20020_H */ diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c index 5fdde6946427..cf607ffcf358 100644 --- a/drivers/net/arcnet/com20020_cs.c +++ b/drivers/net/arcnet/com20020_cs.c @@ -56,25 +56,26 @@ static void regdump(struct net_device *dev) int count; netdev_dbg(dev, "register dump:\n"); - for (count = ioaddr; count < ioaddr + 16; count++) { + for (count = 0; count < 16; count++) { if (!(count % 16)) - pr_cont("%04X:", count); - pr_cont(" %02X", inb(count)); + pr_cont("%04X:", ioaddr + count); + pr_cont(" %02X", arcnet_inb(ioaddr, count)); } pr_cont("\n"); netdev_dbg(dev, "buffer0 dump:\n"); /* set up the address register */ count = 0; - outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI); - outb(count & 0xff, _ADDR_LO); + arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag, + ioaddr, com20020_REG_W_ADDR_HI); + arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO); for (count = 0; count < 256 + 32; count++) { if (!(count % 16)) pr_cont("%04X:", count); /* copy the data */ - pr_cont(" %02X", inb(_MEMDATA)); + pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA)); } pr_cont("\n"); #endif @@ -292,7 +293,9 @@ static int com20020_resume(struct pcmcia_device *link) int ioaddr = dev->base_addr; struct arcnet_local *lp = netdev_priv(dev); - ARCRESET; + arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG); + udelay(5); + arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG); } return 0; -- cgit v1.2.3