From bc86cf7af2ebda88056538e8edff852ee627f76a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 9 Oct 2012 23:26:06 -0700 Subject: mtd: nand: fix Samsung SLC NAND identification regression A combination of the following two commits caused a regression in 3.7-rc1 when identifying some Samsung NAND, so that some previously working NAND were no longer detected properly: commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID Particularly, a regression was seen on Samsung K9F2G08U0B, with the following full 8-byte READ ID string: ec da 10 95 44 00 ec da The basic problem is that Samsung manufactures both SLC and MLC NAND that use a non-standard decoding table for deriving information from their IDs. I have heuristically determined that all the chips that use the new table have ID strings which wrap around after the 6th byte. Unfortunately, I overlooked the fact that some older Samsung SLC (which use a different decoding table) have "5 byte ID strings" which also wrap around after the 6th byte. This patch re-introduces a distinction between these old and new Samsung NAND by checking that the 6th byte is non-zero, allowing both old and new Samsung NAND to be detected properly. Signed-off-by: Brian Norris Tested-by: Brian Norris Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d8e956..d5ece6ea6f98 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; -- cgit v1.2.3 From 5a6ea4af0907f995dc06df21a9c9ef764c7cd3bc Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 25 Sep 2012 15:27:13 +0530 Subject: mtd: ofpart: Fix incorrect NULL check in parse_ofoldpart_partitions() The pointer returned by kzalloc should be tested for NULL to avoid potential NULL pointer dereference later. Incorrect pointer was being tested for NULL. Bug introduced by commit fbcf62a3 (mtd: physmap_of: move parse_obsolete_partitions to become separate parser). This patch fixes this bug. Cc: Dmitry Eremin-Solenikov Cc: Artem Bityutskiy Cc: stable@kernel.org Signed-off-by: Sachin Kamat Signed-off-by: David Woodhouse --- drivers/mtd/ofpart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/ofpart.c index 64be8f0848b0..d9127e2ed808 100644 --- a/drivers/mtd/ofpart.c +++ b/drivers/mtd/ofpart.c @@ -121,7 +121,7 @@ static int parse_ofoldpart_partitions(struct mtd_info *master, nr_parts = plen / sizeof(part[0]); *pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL); - if (!pparts) + if (!*pparts) return -ENOMEM; names = of_get_property(dp, "partition-names", &plen); -- cgit v1.2.3 From 4d62435f0601ecec379fdc48749a10353fee8217 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 15 Sep 2012 13:34:09 +0800 Subject: mtd: mxc_nand: remove cpu_is_xxx by using platform_device_id It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo Acked-by: Sascha Hauer Acked-by: Arnd Bergmann Cc: Artem Bityutskiy Cc: linux-mtd@lists.infradead.org --- arch/arm/mach-imx/clk-imx21.c | 2 +- arch/arm/mach-imx/clk-imx25.c | 2 +- arch/arm/mach-imx/clk-imx27.c | 2 +- arch/arm/mach-imx/clk-imx31.c | 2 +- arch/arm/mach-imx/clk-imx35.c | 2 +- arch/arm/mach-imx/clk-imx51-imx53.c | 2 +- arch/arm/mach-imx/devices/devices-common.h | 1 + arch/arm/mach-imx/devices/platform-mxc_nand.c | 20 +++--- arch/arm/mach-imx/imx27-dt.c | 2 +- drivers/mtd/nand/mxc_nand.c | 96 +++++++++++++++++---------- 10 files changed, 79 insertions(+), 52 deletions(-) (limited to 'drivers/mtd') diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 09fc31c58474..96a4788032d1 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -162,7 +162,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0"); clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0"); clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx21-nand.0"); clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma"); clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index f1d75e72e002..f0f82f204de7 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -198,7 +198,7 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0"); /* i.mx25 has the i.mx35 type cspi */ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0"); clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1"); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index c2f111f42ddb..100e38c48f9f 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -239,7 +239,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_baud_gate], NULL, "imx27-nand.0"); clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index 76e6462cf9ae..729d1a9dbf6a 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -127,7 +127,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc"); clk_register_clkdev(clk[epit1_gate], "epit", NULL); clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index ee2581254fbc..fec48e656efa 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -256,7 +256,7 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_prepare_enable(clk[spba_gate]); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 2449d8ff4a18..4836b4d39a07 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -272,7 +272,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc"); clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc"); - clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand"); + clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand"); clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 86bf34cd4865..30a842ffc553 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -257,6 +257,7 @@ struct platform_device *__init imx_add_mxc_mmc( #include struct imx_mxc_nand_data { + const char *devid; /* * id is traditionally 0, but -1 is more appropriate. We use -1 for new * machines but don't change existing devices as the nand device usually diff --git a/arch/arm/mach-imx/devices/platform-mxc_nand.c b/arch/arm/mach-imx/devices/platform-mxc_nand.c index 54b1d02cc27b..24aaad1a58c9 100644 --- a/arch/arm/mach-imx/devices/platform-mxc_nand.c +++ b/arch/arm/mach-imx/devices/platform-mxc_nand.c @@ -10,15 +10,17 @@ #include #include "devices-common.h" -#define imx_mxc_nand_data_entry_single(soc, _size) \ +#define imx_mxc_nand_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ .irq = soc ## _INT_NFC \ } -#define imx_mxc_nandv3_data_entry_single(soc, _size) \ +#define imx_mxc_nandv3_data_entry_single(soc, _devid, _size) \ { \ + .devid = _devid, \ .id = -1, \ .iobase = soc ## _NFC_BASE_ADDR, \ .iosize = _size, \ @@ -28,32 +30,32 @@ #ifdef CONFIG_SOC_IMX21 const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX21, SZ_4K); + imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX21 */ #ifdef CONFIG_SOC_IMX25 const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX25, SZ_8K); + imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX27, SZ_4K); + imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX31 const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX31, SZ_4K); + imx_mxc_nand_data_entry_single(MX31, "imx27-nand", SZ_4K); #endif #ifdef CONFIG_SOC_IMX35 const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = - imx_mxc_nand_data_entry_single(MX35, SZ_8K); + imx_mxc_nand_data_entry_single(MX35, "imx25-nand", SZ_8K); #endif #ifdef CONFIG_SOC_IMX51 const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = - imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); + imx_mxc_nandv3_data_entry_single(MX51, "imx51-nand", SZ_16K); #endif struct platform_device *__init imx_add_mxc_nand( @@ -76,7 +78,7 @@ struct platform_device *__init imx_add_mxc_nand( .flags = IORESOURCE_MEM, }, }; - return imx_add_platform_device("mxc_nand", data->id, + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 43fbf8640109..a6c288e180ce 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -29,7 +29,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL), OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL), OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL), - OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL), + OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "imx27-nand.0", NULL), { /* sentinel */ } }; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 72e31d86030d..022dcdc256fb 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -37,15 +37,9 @@ #include #include -#include #define DRIVER_NAME "mxc_nand" -#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) -#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21()) -#define nfc_is_v3_2a() cpu_is_mx51() -#define nfc_is_v3_2b() cpu_is_mx53() - /* Addresses for NFC registers */ #define NFC_V1_V2_BUF_SIZE (host->regs + 0x00) #define NFC_V1_V2_BUF_ADDR (host->regs + 0x04) @@ -1283,6 +1277,53 @@ static const struct mxc_nand_devtype_data imx53_nand_devtype_data = { .ppb_shift = 8, }; +static inline int is_imx21_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx21_nand_devtype_data; +} + +static inline int is_imx27_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx27_nand_devtype_data; +} + +static inline int is_imx25_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx25_nand_devtype_data; +} + +static inline int is_imx51_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx51_nand_devtype_data; +} + +static inline int is_imx53_nfc(struct mxc_nand_host *host) +{ + return host->devtype_data == &imx53_nand_devtype_data; +} + +static struct platform_device_id mxcnd_devtype[] = { + { + .name = "imx21-nand", + .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data, + }, { + .name = "imx27-nand", + .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data, + }, { + .name = "imx25-nand", + .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data, + }, { + .name = "imx51-nand", + .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data, + }, { + .name = "imx53-nand", + .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxcnd_devtype); + #ifdef CONFIG_OF_MTD static const struct of_device_id mxcnd_dt_ids[] = { { @@ -1337,32 +1378,6 @@ static int __init mxcnd_probe_dt(struct mxc_nand_host *host) } #endif -static int __init mxcnd_probe_pdata(struct mxc_nand_host *host) -{ - struct mxc_nand_platform_data *pdata = host->dev->platform_data; - - if (!pdata) - return -ENODEV; - - host->pdata = *pdata; - - if (nfc_is_v1()) { - if (cpu_is_mx21()) - host->devtype_data = &imx21_nand_devtype_data; - else - host->devtype_data = &imx27_nand_devtype_data; - } else if (nfc_is_v21()) { - host->devtype_data = &imx25_nand_devtype_data; - } else if (nfc_is_v3_2a()) { - host->devtype_data = &imx51_nand_devtype_data; - } else if (nfc_is_v3_2b()) { - host->devtype_data = &imx53_nand_devtype_data; - } else - BUG(); - - return 0; -} - static int __devinit mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; @@ -1404,8 +1419,16 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) return PTR_ERR(host->clk); err = mxcnd_probe_dt(host); - if (err > 0) - err = mxcnd_probe_pdata(host); + if (err > 0) { + struct mxc_nand_platform_data *pdata = pdev->dev.platform_data; + if (pdata) { + host->pdata = *pdata; + host->devtype_data = (struct mxc_nand_devtype_data *) + pdev->id_entry->driver_data; + } else { + err = -ENODEV; + } + } if (err < 0) return err; @@ -1494,7 +1517,7 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) } /* first scan to find the device and get the page size */ - if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) { + if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) { err = -ENXIO; goto escan; } @@ -1508,7 +1531,7 @@ static int __devinit mxcnd_probe(struct platform_device *pdev) this->ecc.layout = host->devtype_data->ecclayout_4k; if (this->ecc.mode == NAND_ECC_HW) { - if (nfc_is_v1()) + if (is_imx21_nfc(host) || is_imx27_nfc(host)) this->ecc.strength = 1; else this->ecc.strength = (host->eccsize == 4) ? 4 : 8; @@ -1555,6 +1578,7 @@ static struct platform_driver mxcnd_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(mxcnd_dt_ids), }, + .id_table = mxcnd_devtype, .probe = mxcnd_probe, .remove = __devexit_p(mxcnd_remove), }; -- cgit v1.2.3 From c36a7ff4578ab6294885aef5ef241aeec4cdb1f0 Mon Sep 17 00:00:00 2001 From: Jiri Engelthaler Date: Thu, 20 Sep 2012 16:49:50 +0200 Subject: mtd: slram: invalid checking of absolute end address Fixed parsing end absolute address. Signed-off-by: Jiri Engelthaler Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy --- drivers/mtd/devices/slram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 8f52fc858e48..5a5cd2ace4a6 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -240,7 +240,7 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); - devlength = handle_unit(devlength, buffer) - devstart; + devlength = handle_unit(devlength, buffer); if (devlength < devstart) goto err_out; -- cgit v1.2.3 From 0131950ebd146b5e31508233352d6f4625af25b1 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 22 Sep 2012 11:42:31 +0530 Subject: mtd: onenand: Make flexonenand_set_boundary static Fixes the following sparse warning: drivers/mtd/onenand/onenand_base.c:3697:5: warning: symbol 'flexonenand_set_boundary' was not declared. Should it be static? Signed-off-by: Sachin Kamat Acked-by: Kyungmin Park Signed-off-by: Artem Bityutskiy --- drivers/mtd/onenand/onenand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 7153e0d27101..b3f41f200622 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -3694,7 +3694,7 @@ static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int * flexonenand_set_boundary - Writes the SLC boundary * @param mtd - mtd info structure */ -int flexonenand_set_boundary(struct mtd_info *mtd, int die, +static int flexonenand_set_boundary(struct mtd_info *mtd, int die, int boundary, int lock) { struct onenand_chip *this = mtd->priv; -- cgit v1.2.3 From af451af4e0a3a4cd7536843f585c96a9b095a4e8 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 9 Oct 2012 23:26:06 -0700 Subject: mtd: nand: fix Samsung SLC NAND identification regression A combination of the following two commits caused a regression in 3.7-rc1 when identifying some Samsung NAND, so that some previously working NAND were no longer detected properly: commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID Particularly, a regression was seen on Samsung K9F2G08U0B, with the following full 8-byte READ ID string: ec da 10 95 44 00 ec da The basic problem is that Samsung manufactures both SLC and MLC NAND that use a non-standard decoding table for deriving information from their IDs. I have heuristically determined that all the chips that use the new table have ID strings which wrap around after the 6th byte. Unfortunately, I overlooked the fact that some older Samsung SLC (which use a different decoding table) have "5 byte ID strings" which also wrap around after the 6th byte. This patch re-introduces a distinction between these old and new Samsung NAND by checking that the 6th byte is non-zero, allowing both old and new Samsung NAND to be detected properly. Signed-off-by: Brian Norris Tested-by: Brian Norris Reported-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/nand_base.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d8e956..d5ece6ea6f98 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2983,13 +2983,14 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * - * Check for ID length, cell type, and Hynix/Samsung ID to decide what - * to do. + * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung + * ID to decide what to do. */ - if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); extid >>= 2; -- cgit v1.2.3 From 6924d99fcdf1a688538a3cdebd1f135c22eec191 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 14 Nov 2012 21:46:30 -0800 Subject: mtd: nand: fix Samsung SLC detection regression This patch fixes errors seen in identifying old Samsung SLC, due to the following commits: commit e2d3a35ee427aaba99b6c68a56609ce276c51270 mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID commit e3b88bd604283ef83ae6e8f53622d5b1ffe9d43a mtd: nand: add generic READ ID length calculation functions Some Samsung NAND with "5-byte" ID really appear to have 6-byte IDs, with wraparound like: Samsung K9K8G08U0D ec d3 51 95 58 ec ec d3 Samsung K9F1G08U0C ec f1 00 95 40 ec ec f1 Samsung K9F2G08U0B ec da 10 95 44 00 ec da This bad wraparound makes it hard to reliably detect the difference between Samsung SLC with 5-byte ID and Samsung SLC with 6-byte ID. The fix is to, for now, only use the new Samsung table for MLC. We cannot support the new SLC (K9FAG08U0M) until Samsung gives better ID decode information. Note that this applies in addition to the previous regression fix: commit bc86cf7af2ebda88056538e8edff852ee627f76a mtd: nand: fix Samsung SLC NAND identification regression Together, these patches completely restore the previous detection behavior so that we cannot see any more regressions in Samsung SLC NAND (finger crossed). With luck, I can get a hold of a Samsung representative and stop having to cross my fingers eventually. Reported-by: Sylwester Nawrocki Tested-by: Sylwester Nawrocki Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/nand_base.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d5ece6ea6f98..1a03b7f673ce 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2990,6 +2990,7 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, * ID to decide what to do. */ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG && + (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && id_data[5] != 0x00) { /* Calc pagesize */ mtd->writesize = 2048 << (extid & 0x03); -- cgit v1.2.3 From 45c3eb7d3a07eb08d1b5b0f5983a996d41610b84 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 30 Nov 2012 08:41:50 -0800 Subject: ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King cc: Kevin Hilman cc: "Benoît Cousson" cc: Herbert Xu cc: "David S. Miller" cc: Vinod Koul cc: Dan Williams cc: Mauro Carvalho Chehab cc: Laurent Pinchart cc: Guennadi Liakhovetski cc: David Woodhouse cc: Kyungmin Park cc: Greg Kroah-Hartman cc: Tomi Valkeinen cc: Florian Tobias Schandinat cc: Hans Verkuil cc: Vaibhav Hiremath cc: Lokesh Vutla cc: Rusty Russell cc: Artem Bityutskiy cc: Afzal Mohammed cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/dma.c | 2 +- arch/arm/mach-omap1/io.c | 2 +- arch/arm/mach-omap1/lcd_dma.c | 2 +- arch/arm/mach-omap1/mcbsp.c | 2 +- arch/arm/mach-omap1/pm.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/dma.c | 2 +- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/mcbsp.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 2 +- .../mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c | 3 +- arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 3 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/include/plat-omap/dma-omap.h | 377 --------------------- drivers/crypto/omap-aes.c | 2 +- drivers/crypto/omap-sham.c | 2 +- drivers/dma/omap-dma.c | 2 - drivers/media/platform/omap/omap_vout.c | 2 +- drivers/media/platform/omap/omap_vout_vrfb.c | 2 +- drivers/media/platform/omap3isp/ispstat.h | 2 +- drivers/media/platform/soc_camera/omap1_camera.c | 2 +- drivers/mtd/nand/omap2.c | 1 - drivers/mtd/onenand/omap2.c | 2 +- drivers/usb/gadget/omap_udc.c | 2 +- drivers/usb/musb/tusb6010_omap.c | 2 +- drivers/video/omap/lcdc.c | 2 +- drivers/video/omap/omapfb_main.c | 2 +- drivers/video/omap/sossi.c | 2 +- include/linux/omap-dma.h | 366 ++++++++++++++++++++ 45 files changed, 408 insertions(+), 422 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat-omap/dma-omap.h (limited to 'drivers/mtd') diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 9134b646f01b..dcf364d1a8b1 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,7 +39,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index bf213d1d8075..b3fcdedb44ca 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 584b6fab894b..c33dceb46607 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index fbc986bfe69e..2948b0ee4be8 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 60d917a93763..7a05895c0be3 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,7 +38,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 1ebc7e08d6e5..20ed52ae1714 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,7 +36,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 978aed85d328..e190611e4b46 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 5a3b80617a11..499b8accb83d 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 7ed8c1857d56..77924be37d41 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,7 +27,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index c6d8fdf92e9c..b0d4723c9a90 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #include "soc.h" #include diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 66d663a6ef3a..7a7690ab6cb8 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -52,7 +52,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 6601754f9512..7b201546834d 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,7 @@ #include #include "common.h" -#include +#include #include