From 5bd34c091a044d130601370c370f84b1c59f1627 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 27 May 2006 22:16:10 +0200 Subject: [MTD] NAND Replace oobinfo by ecclayout The nand_oobinfo structure is not fitting the newer error correction demands anymore. Replace it by struct nand_ecclayout and fixup the users all over the place. Keep the nand_oobinfo based ioctl for user space compability reasons. Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/rtc_from4.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/mtd/nand/rtc_from4.c') diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index de6de91fbad9..f8c49645324d 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -142,8 +142,7 @@ static struct rs_control *rs_decoder; /* * hardware specific Out Of Band information */ -static struct nand_oobinfo rtc_from4_nand_oobinfo = { - .useecc = MTD_NANDECC_AUTOPLACE, +static struct nand_ecclayout rtc_from4_nand_oobinfo = { .eccbytes = 32, .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, @@ -574,7 +573,7 @@ static int __init rtc_from4_init(void) /* return the status of extra status and ECC checks */ this->errstat = rtc_from4_errstat; /* set the nand_oobinfo to support FPGA H/W error detection */ - this->autooob = &rtc_from4_nand_oobinfo; + this->ecc.layout = &rtc_from4_nand_oobinfo; this->ecc.hwctl = rtc_from4_enable_hwecc; this->ecc.calculate = rtc_from4_calculate_ecc; this->ecc.correct = rtc_from4_correct_data; -- cgit v1.2.3