From e27a9960af0506d84b9ca9dd3874b7d88901f230 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 16 Jun 2005 09:49:33 +0100 Subject: [MTD] Add Resident Flash Disk (RFD) support This type of flash translation layer (FTL) is used by the Embedded BIOS by General Software. It is known as the Resident Flash Disk (RFD), see: http://www.gensw.com/pages/prod/bios/rfd.htm Signed-off-by: Sean Young Signed-off-by: Thomas Gleixner --- drivers/mtd/Kconfig | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/mtd/Kconfig') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 027054dea032..843a1cbe0866 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,4 +1,4 @@ -# $Id: Kconfig,v 1.7 2004/11/22 11:33:56 ijc Exp $ +# $Id: Kconfig,v 1.9 2005/06/16 08:49:29 sean Exp $ menu "Memory Technology Devices (MTD)" @@ -253,6 +253,16 @@ config INFTL permitted to copy, modify and distribute the code as you wish. Just not use it. +config RFD_FTL + tristate "Resident Flash Disk (Flash Translation Layer) support" + depends on MTD + ---help--- + This provides support for the flash translation layer known + as the Resident Flash Disk (RFD), as used by the Embedded BIOS + of General Software. + See http://www.gensw.com/pages/prod/bios/rfd.htm for further + information. + source "drivers/mtd/chips/Kconfig" source "drivers/mtd/maps/Kconfig" -- cgit v1.2.3 From cd5f6346bc28a41375412b49b290d22ee4e4bbe8 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 11 Jul 2005 11:41:53 +0100 Subject: [MTD] Add initial support for OneNAND flash chips OneNAND is a new flash technology from Samsung with integrated SRAM buffers and logic interface. Signed-off-by: Kyungmin Park Signed-off-by: Thomas Gleixner --- drivers/mtd/Kconfig | 10 +- drivers/mtd/Makefile | 4 +- drivers/mtd/onenand/Kconfig | 32 + drivers/mtd/onenand/Makefile | 9 + drivers/mtd/onenand/omap-onenand.c | 178 +++++ drivers/mtd/onenand/onenand_base.c | 1462 ++++++++++++++++++++++++++++++++++++ include/linux/mtd/onenand.h | 134 ++++ include/linux/mtd/onenand_regs.h | 167 ++++ 8 files changed, 1990 insertions(+), 6 deletions(-) create mode 100644 drivers/mtd/onenand/Kconfig create mode 100644 drivers/mtd/onenand/Makefile create mode 100644 drivers/mtd/onenand/omap-onenand.c create mode 100644 drivers/mtd/onenand/onenand_base.c create mode 100644 include/linux/mtd/onenand.h create mode 100644 include/linux/mtd/onenand_regs.h (limited to 'drivers/mtd/Kconfig') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 843a1cbe0866..3dbfbafb3481 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,4 +1,4 @@ -# $Id: Kconfig,v 1.9 2005/06/16 08:49:29 sean Exp $ +# $Id: Kconfig,v 1.10 2005/07/11 10:39:27 gleixner Exp $ menu "Memory Technology Devices (MTD)" @@ -259,9 +259,9 @@ config RFD_FTL ---help--- This provides support for the flash translation layer known as the Resident Flash Disk (RFD), as used by the Embedded BIOS - of General Software. - See http://www.gensw.com/pages/prod/bios/rfd.htm for further - information. + of General Software. There is a blurb at: + + http://www.gensw.com/pages/prod/bios/rfd.htm source "drivers/mtd/chips/Kconfig" @@ -271,5 +271,7 @@ source "drivers/mtd/devices/Kconfig" source "drivers/mtd/nand/Kconfig" +source "drivers/mtd/onenand/Kconfig" + endmenu diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index cb16b7d478ce..fc9374407c2b 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -1,7 +1,7 @@ # # Makefile for the memory technology device drivers. # -# $Id: Makefile.common,v 1.6 2005/06/16 08:49:29 sean Exp $ +# $Id: Makefile.common,v 1.7 2005/07/11 10:39:27 gleixner Exp $ # Core functionality. mtd-y := mtdcore.o @@ -25,4 +25,4 @@ obj-$(CONFIG_RFD_FTL) += rfd_ftl.o mtd_blkdevs.o nftl-objs := nftlcore.o nftlmount.o inftl-objs := inftlcore.o inftlmount.o -obj-y += chips/ maps/ devices/ nand/ +obj-y += chips/ maps/ devices/ nand/ onenand/ diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig new file mode 100644 index 000000000000..7d76ede984d8 --- /dev/null +++ b/drivers/mtd/onenand/Kconfig @@ -0,0 +1,32 @@ +# +# linux/drivers/mtd/onenand/Kconfig +# + +menu "OneNAND Flash Device Drivers (EXPERIMENTAL)" + depends on MTD != n && EXPERIMENTAL + +config MTD_ONENAND + tristate "OneNAND Device Support" + depends on MTD + help + This enables support for accessing all type of OneNAND flash + devices. For further information see + . + +config MTD_ONENAND_VERIFY_WRITE + bool "Verify OneNAND page writes" + depends on MTD_ONENAND + help + This adds an extra check when data is written to the flash. The + OneNAND flash device internally checks only bits transitioning + from 1 to 0. There is a rare possibility that even though the + device thinks the write was successful, a bit could have been + flipped accidentaly due to device wear or something else. + +config MTD_ONENAND_OMAP + tristate "OneNAND Flash device on OMAP board" + depends on ARCH_OMAP && MTD_ONENAND + help + Support for OneNAND flash on TI OMAP board. + +endmenu diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile new file mode 100644 index 000000000000..f4e75864d8b5 --- /dev/null +++ b/drivers/mtd/onenand/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the OneNAND MTD +# + +# Core functionality. +obj-$(CONFIG_MTD_ONENAND) += onenand_base.o + +# Board specific. +obj-$(CONFIG_MTD_ONENAND_OMAP) += omap-onenand.o diff --git a/drivers/mtd/onenand/omap-onenand.c b/drivers/mtd/onenand/omap-onenand.c new file mode 100644 index 000000000000..56e1aec6b835 --- /dev/null +++ b/drivers/mtd/onenand/omap-onenand.c @@ -0,0 +1,178 @@ +/* + * linux/drivers/mtd/onenand/omap-onenand.c + * + * Copyright (c) 2005 Samsung Electronics + * Kyungmin Park + * + * Derived from linux/drivers/mtd/nand/omap-nand-flash.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Overview: + * This is a device driver for the OneNAND flash device for TI OMAP boards. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define OMAP_ONENAND_FLASH_START1 OMAP_CS2A_PHYS +#define OMAP_ONENAND_FLASH_START2 OMAP_CS0_PHYS +/* + * MTD structure for OMAP board + */ +static struct mtd_info *omap_onenand_mtd = NULL; + +/* + * Define partitions for flash devices + */ + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition static_partition[] = { + { + .name = "X-Loader + U-Boot", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "U-Boot Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 2 * SZ_1M + }, + { + .name = "filesystem0", + .offset = MTDPART_OFS_APPEND, + .size = SZ_16M, + }, + { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +const char *part_probes[] = { "cmdlinepart", NULL, }; + +#endif + +/* Scan to find existance of the device at base. + This also allocates oob and data internal buffers */ +static char onenand_name[] = "onenand"; + +/* + * Main initialization routine + */ +static int __init omap_onenand_init (void) +{ + struct onenand_chip *this; + struct mtd_partition *dynamic_partition = 0; + int err = 0; + + /* Allocate memory for MTD device structure and private data */ + omap_onenand_mtd = kmalloc (sizeof(struct mtd_info) + sizeof (struct onenand_chip), + GFP_KERNEL); + if (!omap_onenand_mtd) { + printk (KERN_WARNING "Unable to allocate OneNAND MTD device structure.\n"); + err = -ENOMEM; + goto out; + } + + /* Get pointer to private data */ + this = (struct onenand_chip *) (&omap_onenand_mtd[1]); + + /* Initialize structures */ + memset((char *) omap_onenand_mtd, 0, sizeof(struct mtd_info) + sizeof(struct onenand_chip)); + + /* Link the private data with the MTD structure */ + omap_onenand_mtd->priv = this; + + /* try the first address */ + this->base = ioremap(OMAP_ONENAND_FLASH_START1, SZ_128K); + omap_onenand_mtd->name = onenand_name; + if (onenand_scan(omap_onenand_mtd, 1)){ + /* try the second address */ + iounmap(this->base); + this->base = ioremap(OMAP_ONENAND_FLASH_START2, SZ_128K); + if (onenand_scan(omap_onenand_mtd, 1)) { + iounmap(this->base); + err = -ENXIO; + goto out_mtd; + } + } + + /* Register the partitions */ + switch (omap_onenand_mtd->size) { + case SZ_128M: + case SZ_64M: + case SZ_32M: +#ifdef CONFIG_MTD_PARTITIONS + err = parse_mtd_partitions(omap_onenand_mtd, part_probes, + &dynamic_partition, 0); + if (err > 0) + err = add_mtd_partitions(omap_onenand_mtd, + dynamic_partition, err); + else if (1) + err = add_mtd_partitions(omap_onenand_mtd, + static_partition, + ARRAY_SIZE(static_partition)); + else +#endif + err = add_mtd_device(omap_onenand_mtd); + if (err) + goto out_buf; + break; + + default: + printk(KERN_WARNING "Unsupported OneNAND device\n"); + err = -ENXIO; + goto out_buf; + } + + return 0; + +out_buf: + onenand_release(omap_onenand_mtd); + iounmap(this->base); +out_mtd: + kfree(omap_onenand_mtd); +out: + return err; +} + +/* + * Clean up routine + */ +static void __exit omap_onenand_cleanup (void) +{ + struct onenand_chip *this = omap_onenand_mtd->priv; + + /* onenand_release frees MTD partitions, MTD structure + and onenand internal buffers */ + onenand_release(omap_onenand_mtd); + iounmap(this->base); + kfree(omap_onenand_mtd); +} + +module_init(omap_onenand_init); +module_exit(omap_onenand_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kyungmin Park "); +MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP boards"); diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c new file mode 100644 index 000000000000..bcce22ae3cb1 --- /dev/null +++ b/drivers/mtd/onenand/onenand_base.c @@ -0,0 +1,1462 @@ +/* + * linux/drivers/mtd/onenand/onenand_base.c + * + * Copyright (C) 2005 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include + +/** + * onenand_oob_64 - oob info for large (2KB) page + */ +static struct nand_oobinfo onenand_oob_64 = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 20, + .eccpos = { + 8, 9, 10, 11, 12, + 24, 25, 26, 27, 28, + 40, 41, 42, 43, 44, + 56, 57, 58, 59, 60, + }, + .oobfree = { + {2, 3}, {14, 2}, {18, 3}, {30, 2}, + {24, 3}, {46, 2}, {40, 3}, {62, 2} } +}; + +/** + * onenand_oob_32 - oob info for middle (1KB) page + */ +static struct nand_oobinfo onenand_oob_32 = { + .useecc = MTD_NANDECC_AUTOPLACE, + .eccbytes = 10, + .eccpos = { + 8, 9, 10, 11, 12, + 24, 25, 26, 27, 28, + }, + .oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} } +}; + +static const unsigned char ffchars[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ +}; + +/** + * onenand_readw - [OneNAND Interface] Read OneNAND register + * @param addr address to read + * + * Read OneNAND register + */ +static unsigned short onenand_readw(void __iomem *addr) +{ + return readw(addr); +} + +/** + * onenand_writew - [OneNAND Interface] Write OneNAND register with value + * @param value value to write + * @param addr address to write + * + * Write OneNAND register with value + */ +static void onenand_writew(unsigned short value, void __iomem *addr) +{ + writew(value, addr); +} + +/** + * onenand_block_address - [DEFAULT] Get block address + * @param device the device id + * @param block the block + * @return translated block address if DDP, otherwise same + * + * Setup Start Address 1 Register (F100h) + */ +static int onenand_block_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device Flash Core select, NAND Flash Block Address */ + int dfs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dfs = 1; + + return (dfs << ONENAND_DDP_SHIFT) | (block & (mask - 1)); + } + + return block; +} + +/** + * onenand_bufferram_address - [DEFAULT] Get bufferram address + * @param device the device id + * @param block the block + * @return set DBS value if DDP, otherwise 0 + * + * Setup Start Address 2 Register (F101h) for DDP + */ +static int onenand_bufferram_address(int device, int block) +{ + if (device & ONENAND_DEVICE_IS_DDP) { + /* Device BufferRAM Select */ + int dbs = 0, density, mask; + + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + mask = (1 << (density + 6)); + + if (block & mask) + dbs = 1; + + return (dbs << ONENAND_DDP_SHIFT); + } + + return 0; +} + +/** + * onenand_page_address - [DEFAULT] Get page address + * @param page the page address + * @param sector the sector address + * @return combined page and sector address + * + * Setup Start Address 8 Register (F107h) + */ +static int onenand_page_address(int page, int sector) +{ + /* Flash Page Address, Flash Sector Address */ + int fpa, fsa; + + fpa = page & ONENAND_FPA_MASK; + fsa = sector & ONENAND_FSA_MASK; + + return ((fpa << ONENAND_FPA_SHIFT) | fsa); +} + +/** + * onenand_buffer_address - [DEFAULT] Get buffer address + * @param dataram1 DataRAM index + * @param sectors the sector address + * @param count the number of sectors + * @return the start buffer value + * + * Setup Start Buffer Register (F200h) + */ +static int onenand_buffer_address(int dataram1, int sectors, int count) +{ + int bsa, bsc; + + /* BufferRAM Sector Address */ + bsa = sectors & ONENAND_BSA_MASK; + + if (dataram1) + bsa |= ONENAND_BSA_DATARAM1; /* DataRAM1 */ + else + bsa |= ONENAND_BSA_DATARAM0; /* DataRAM0 */ + + /* BufferRAM Sector Count */ + bsc = count & ONENAND_BSC_MASK; + + return ((bsa << ONENAND_BSA_SHIFT) | bsc); +} + +/** + * onenand_command - [DEFAULT] Send command to OneNAND device + * @param mtd MTD device structure + * @param cmd the command to be sent + * @param addr offset to read from or write to + * @param len number of bytes to read or write + * + * Send command to OneNAND device. This function is used for middle/large page + * devices (1KB/2KB Bytes per page) + */ +static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int value, readcmd = 0; + int block, page; + /* Now we use page size operation */ + int sectors = 4, count = 4; + + /* Address translation */ + switch (cmd) { + case ONENAND_CMD_UNLOCK: + case ONENAND_CMD_LOCK: + case ONENAND_CMD_LOCK_TIGHT: + block = -1; + page = -1; + break; + + case ONENAND_CMD_ERASE: + case ONENAND_CMD_BUFFERRAM: + block = (int) (addr >> this->erase_shift); + page = -1; + break; + + default: + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); + page &= this->page_mask; + break; + } + + /* NOTE: The setting order of the registers is very important! */ + if (cmd == ONENAND_CMD_BUFFERRAM) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this->device_id, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + + /* Switch to the next data buffer */ + ONENAND_SET_NEXT_BUFFERRAM(this); + + return 0; + } + + if (block != -1) { + /* Write 'DFS, FBA' of Flash */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + } + + if (page != -1) { + int dataram; + + switch (cmd) { + case ONENAND_CMD_READ: + case ONENAND_CMD_READOOB: + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + readcmd = 1; + break; + + default: + dataram = ONENAND_CURRENT_BUFFERRAM(this); + break; + } + + /* Write 'FPA, FSA' of Flash */ + value = onenand_page_address(page, sectors); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS8); + + /* Write 'BSA, BSC' of DataRAM */ + value = onenand_buffer_address(dataram, sectors, count); + this->write_word(value, this->base + ONENAND_REG_START_BUFFER); + + if (readcmd) { + /* Select DataRAM for DDP */ + value = onenand_bufferram_address(this->device_id, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); + } + } + + /* Interrupt clear */ + this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT); + + /* Write command */ + this->write_word(cmd, this->base + ONENAND_REG_COMMAND); + + return 0; +} + +/** + * onenand_wait - [DEFAULT] wait until the command is done + * @param mtd MTD device structure + * @param state state to select the max. timeout value + * + * Wait for command done. This applies to all OneNAND command + * Read can take up to 30us, erase up to 2ms and program up to 350us + * according to general OneNAND specs + */ +static int onenand_wait(struct mtd_info *mtd, int state) +{ + struct onenand_chip * this = mtd->priv; + unsigned long timeout; + unsigned int flags = ONENAND_INT_MASTER; + unsigned int interrupt = 0; + unsigned int ctrl, ecc; + + /* The 20 msec is enough */ + timeout = jiffies + msecs_to_jiffies(20); + while (time_before(jiffies, timeout)) { + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + + if (interrupt & flags) + break; + + if (state != FL_READING) + cond_resched(); + } + /* To get correct interrupt status in timeout case */ + interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); + + ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + + if (ctrl & ONENAND_CTRL_ERROR) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x", ctrl); + return -EIO; + } + + if (ctrl & ONENAND_CTRL_LOCK) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error = 0x%04x", ctrl); + return -EIO; + } + + if (interrupt & ONENAND_INT_READ) { + ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); + if (ecc & ONENAND_ECC_2BIT_ALL) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x", ecc); + return -EBADMSG; + } + } + + return 0; +} + +/** + * onenand_bufferram_offset - [DEFAULT] BufferRAM offset + * @param mtd MTD data structure + * @param area BufferRAM area + * @return offset given area + * + * Return BufferRAM offset given area + */ +static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area) +{ + struct onenand_chip *this = mtd->priv; + + if (ONENAND_CURRENT_BUFFERRAM(this)) { + if (area == ONENAND_DATARAM) + return mtd->oobblock; + if (area == ONENAND_SPARERAM) + return mtd->oobsize; + } + + return 0; +} + +/** + * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Read the BufferRAM area + */ +static int onenand_read_bufferram(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(buffer, bufferram + offset, count); + + return 0; +} + +/** + * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area + * @param mtd MTD data structure + * @param area BufferRAM area + * @param buffer the databuffer to put/get data + * @param offset offset to read from or write to + * @param count number of bytes to read/write + * + * Write the BufferRAM area + */ +static int onenand_write_bufferram(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, size_t count) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *bufferram; + + bufferram = this->base + area; + + bufferram += onenand_bufferram_offset(mtd, area); + + memcpy(bufferram + offset, buffer, count); + + return 0; +} + +/** + * onenand_check_bufferram - [GENERIC] Check BufferRAM information + * @param mtd MTD data structure + * @param addr address to check + * @return 1 if there are valid data, otherwise 0 + * + * Check bufferram if there is data we required + */ +static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); + page &= this->page_mask; + + i = ONENAND_CURRENT_BUFFERRAM(this); + + /* Is there valid data? */ + if (this->bufferram[i].block == block && + this->bufferram[i].page == page && + this->bufferram[i].valid) + return 1; + + return 0; +} + +/** + * onenand_update_bufferram - [GENERIC] Update BufferRAM information + * @param mtd MTD data structure + * @param addr address to update + * @param valid valid flag + * + * Update BufferRAM information + */ +static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr, + int valid) +{ + struct onenand_chip *this = mtd->priv; + int block, page; + int i; + + block = (int) (addr >> this->erase_shift); + page = (int) (addr >> this->page_shift); + page &= this->page_mask; + + /* Invalidate BufferRAM */ + for (i = 0; i < MAX_BUFFERRAM; i++) { + if (this->bufferram[i].block == block && + this->bufferram[i].page == page) + this->bufferram[i].valid = 0; + } + + /* Update BufferRAM */ + i = ONENAND_CURRENT_BUFFERRAM(this); + this->bufferram[i].block = block; + this->bufferram[i].page = page; + this->bufferram[i].valid = valid; + + return 0; +} + +/** + * onenand_get_device - [GENERIC] Get chip for selected access + * @param mtd MTD device structure + * @param new_state the state which is requested + * + * Get the device and lock it for exclusive access + */ +static void onenand_get_device(struct mtd_info *mtd, int new_state) +{ + struct onenand_chip *this = mtd->priv; + DECLARE_WAITQUEUE(wait, current); + + /* + * Grab the lock and see if the device is available + */ + while (1) { + spin_lock(&this->chip_lock); + if (this->state == FL_READY) { + this->state = new_state; + spin_unlock(&this->chip_lock); + break; + } + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&this->wq, &wait); + spin_unlock(&this->chip_lock); + schedule(); + remove_wait_queue(&this->wq, &wait); + } +} + +/** + * onenand_release_device - [GENERIC] release chip + * @param mtd MTD device structure + * + * Deselect, release chip lock and wake up anyone waiting on the device + */ +static void onenand_release_device(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + + /* Release the chip */ + spin_lock(&this->chip_lock); + this->state = FL_READY; + wake_up(&this->wq); + spin_unlock(&this->chip_lock); +} + +/** + * onenand_read_ecc - [MTD Interface] Read data with ECC + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * @param oob_buf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND read with ECC + */ +static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf, + u_char *oob_buf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, column; + int thislen; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + + /* Do not allow reads past end of device */ + if ((from + len) > mtd->size) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: Attempt read beyond end of device\n"); + *retlen = 0; + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + /* TODO handling oob */ + + while (read < len) { + thislen = min_t(int, mtd->oobblock, len - read); + + column = from & (mtd->oobblock - 1); + if (column + thislen > mtd->oobblock) + thislen = mtd->oobblock - column; + + if (!onenand_check_bufferram(mtd, from)) { + this->command(mtd, ONENAND_CMD_READ, from, mtd->oobblock); + + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + onenand_update_bufferram(mtd, from, 1); + } + + this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen); + + read += thislen; + + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_ecc: read failed = %d\n", ret); + goto out; + } + + from += thislen; + buf += thislen; + } + +out: + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + /* + * Return success, if no ECC failures, else -EBADMSG + * fs driver will take care of that, because + * retlen == desired len and result == -EBADMSG + */ + *retlen = read; + return ret; +} + +/** + * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL +*/ +static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + return onenand_read_ecc(mtd, from, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_read_oob - [MTD Interface] OneNAND read out-of-band + * @param mtd MTD device structure + * @param from offset to read from + * @param len number of bytes to read + * @param retlen pointer to variable to store the number of read bytes + * @param buf the databuffer to put data + * + * OneNAND read out-of-band data from the spare area + */ +static int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int read = 0, thislen, column; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); + + /* Initialize return length value */ + *retlen = 0; + + /* Do not allow reads past end of device */ + if (unlikely((from + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_READING); + + column = from & (mtd->oobsize - 1); + + while (read < len) { + thislen = mtd->oobsize - column; + thislen = min_t(int, thislen, len); + + this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + + onenand_update_bufferram(mtd, from, 0); + + ret = this->wait(mtd, FL_READING); + /* First copy data and check return value for ECC handling */ + + this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + + read += thislen; + + if (read == len) + break; + + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = %d\n", ret); + goto out; + } + + buf += thislen; + + /* Read more? */ + if (read < len) { + /* Page size */ + from += mtd->oobblock; + column = 0; + } + } + +out: + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = read; + return ret; +} + +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE +/** + * onenand_verify_page - [GENERIC] verify the chip contents after a write + * @param mtd MTD device structure + * @param buf the databuffer to verify + * @param block block address + * @param page page address + * + * Check DataRAM area directly + */ +static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, + loff_t addr, int block, int page) +{ + struct onenand_chip *this = mtd->priv; + void __iomem *dataram0, *dataram1; + int ret = 0; + + this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock); + + ret = this->wait(mtd, FL_READING); + if (ret) + return ret; + + onenand_update_bufferram(mtd, addr, 1); + + /* Check, if the two dataram areas are same */ + dataram0 = this->base + ONENAND_DATARAM; + dataram1 = dataram0 + mtd->oobblock; + + if (memcmp(dataram0, dataram1, mtd->oobblock)) + return -EBADMSG; + + return 0; +} +#else +#define onenand_verify_page(...) (0) +#endif + +#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0) + +/** + * onenand_write_ecc - [MTD Interface] OneNAND write with ECC + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * @param eccbuf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND write with ECC + */ +static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf, + u_char *eccbuf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + int written = 0; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobblock, len - written); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + + this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen); + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + + onenand_update_bufferram(mtd, to, 1); + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: write filaed %d\n", ret); + goto out; + } + + written += thislen; + + /* Only check verify write turn on */ + ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_ecc: verify failed %d\n", ret); + goto out; + } + + if (written == len) + break; + + to += thislen; + buf += thislen; + } + +out: + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return ret; +} + +/** + * onenand_write - [MTD Interface] compability function for onenand_write_ecc + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * This function simply calls onenand_write_ecc + * with oob buffer and oobsel = NULL + */ +static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + return onenand_write_ecc(mtd, to, len, retlen, buf, NULL, NULL); +} + +/** + * onenand_write_oob - [MTD Interface] OneNAND write out-of-band + * @param mtd MTD device structure + * @param to offset to write to + * @param len number of bytes to write + * @param retlen pointer to variable to store the number of written bytes + * @param buf the data to write + * + * OneNAND write out-of-band + */ +static int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct onenand_chip *this = mtd->priv; + int column, status; + int written = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); + + /* Initialize retlen, in case of early exit */ + *retlen = 0; + + /* Do not allow writes past end of device */ + if (unlikely((to + len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* Loop until all data write */ + while (written < len) { + int thislen = min_t(int, mtd->oobsize, len - written); + + column = to & (mtd->oobsize - 1); + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize); + + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); + this->write_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen); + + this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + + onenand_update_bufferram(mtd, to, 0); + + status = this->wait(mtd, FL_WRITING); + if (status) + goto out; + + written += thislen; + + if (written == len) + break; + + to += thislen; + buf += thislen; + } + +out: + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return 0; +} + +/** + * onenand_writev_ecc - [MTD Interface] write with iovec with ecc + * @param mtd MTD device structure + * @param vecs the iovectors to write + * @param count number of vectors + * @param to offset to write to + * @param retlen pointer to variable to store the number of written bytes + * @param eccbuf filesystem supplied oob data buffer + * @param oobsel oob selection structure + * + * OneNAND write with iovec with ecc + */ +static int onenand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen, + u_char *eccbuf, struct nand_oobinfo *oobsel) +{ + struct onenand_chip *this = mtd->priv; + unsigned char buffer[mtd->oobblock], *pbuf; + size_t total_len, len; + int i, written = 0; + int ret = 0; + + /* Preset written len for early exit */ + *retlen = 0; + + /* Calculate total length of data */ + total_len = 0; + for (i = 0; i < count; i++) + total_len += vecs[i].iov_len; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_writev_ecc: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); + + /* Do not allow write past end of the device */ + if (unlikely((to + total_len) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempted write past end of device\n"); + return -EINVAL; + } + + /* Reject writes, which are not page aligned */ + if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(total_len))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: Attempt to write not page aligned data\n"); + return -EINVAL; + } + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_WRITING); + + /* TODO handling oob */ + + /* Loop until all keve's data has been written */ + len = 0; + while (count) { + pbuf = buffer; + /* + * If the given tuple is >= pagesize then + * write it out from the iov + */ + if ((vecs->iov_len - len) >= mtd->oobblock) { + pbuf = vecs->iov_base + len; + + len += mtd->oobblock; + + /* Check, if we have to switch to the next tuple */ + if (len >= (int) vecs->iov_len) { + vecs++; + len = 0; + count--; + } + } else { + int cnt = 0, thislen; + while (cnt < mtd->oobblock) { + thislen = min_t(int, mtd->oobblock - cnt, vecs->iov_len - len); + memcpy(buffer + cnt, vecs->iov_base + len, thislen); + cnt += thislen; + len += thislen; + + /* Check, if we have to switch to the next tuple */ + if (len >= (int) vecs->iov_len) { + vecs++; + len = 0; + count--; + } + } + } + + this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock); + + this->write_bufferram(mtd, ONENAND_DATARAM, pbuf, 0, mtd->oobblock); + this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize); + + this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock); + + onenand_update_bufferram(mtd, to, 1); + + ret = this->wait(mtd, FL_WRITING); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: write failed %d\n", ret); + goto out; + } + + + /* Only check verify write turn on */ + ret = onenand_verify_page(mtd, (u_char *) pbuf, to, block, page); + if (ret) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_writev_ecc: verify failed %d\n", ret); + goto out; + } + + written += mtd->oobblock; + + to += mtd->oobblock; + } + +out: + /* Deselect and wakt up anyone waiting on the device */ + onenand_release_device(mtd); + + *retlen = written; + + return 0; +} + +/** + * onenand_writev - [MTD Interface] compabilty function for onenand_writev_ecc + * @param mtd MTD device structure + * @param vecs the iovectors to write + * @param count number of vectors + * @param to offset to write to + * @param retlen pointer to variable to store the number of written bytes + * + * OneNAND write with kvec. This just calls the ecc function + */ +static int onenand_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen) +{ + return onenand_writev_ecc(mtd, vecs, count, to, retlen, NULL, NULL); +} + +/** + * onenand_erase - [MTD Interface] erase block(s) + * @param mtd MTD device structure + * @param instr erase instruction + * + * Erase one ore more blocks + */ +static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) +{ + struct onenand_chip *this = mtd->priv; + unsigned int block_size; + loff_t addr; + int len; + int ret = 0; + + DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); + + block_size = (1 << this->erase_shift); + + /* Start address must align on block boundary */ + if (unlikely(instr->addr & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n"); + return -EINVAL; + } + + /* Length must align on block boundary */ + if (unlikely(instr->len & (block_size - 1))) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n"); + return -EINVAL; + } + + /* Do not allow erase past end of device */ + if (unlikely((instr->len + instr->addr) > mtd->size)) { + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n"); + return -EINVAL; + } + + instr->fail_addr = 0xffffffff; + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_ERASING); + + /* Loop throught the pages */ + len = instr->len; + addr = instr->addr; + + instr->state = MTD_ERASING; + + while (len) { + + /* TODO Check badblock */ + + this->command(mtd, ONENAND_CMD_ERASE, addr, block_size); + + ret = this->wait(mtd, FL_ERASING); + /* Check, if it is write protected */ + if (ret) { + if (ret == -EPERM) + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Device is write protected!!!\n"); + else + DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift)); + instr->state = MTD_ERASE_FAILED; + instr->fail_addr = addr; + goto erase_exit; + } + + len -= block_size; + addr += block_size; + } + + instr->state = MTD_ERASE_DONE; + +erase_exit: + + ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + + /* Deselect and wake up anyone waiting on the device */ + onenand_release_device(mtd); + + return ret; +} + +/** + * onenand_sync - [MTD Interface] sync + * @param mtd MTD device structure + * + * Sync is actually a wait for chip ready function + */ +static void onenand_sync(struct mtd_info *mtd) +{ + DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n"); + + /* Grab the lock and see if the device is available */ + onenand_get_device(mtd, FL_SYNCING); + + /* Release it and go back */ + onenand_release_device(mtd); +} + +/** + * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * TODO + * 1. Bad block table (BBT) + * -> using NAND BBT to support JFFS2 + * 2. Bad block management (BBM) + * -> bad block replace scheme + * + * Currently we do nothing + */ + return 0; +} + +/** + * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + */ +static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* see above */ + return 0; +} + +/** + * onenand_unlock - [MTD Interface] Unlock block(s) + * @param mtd MTD device structure + * @param ofs offset relative to mtd start + * @param len number of bytes to unlock + * + * Unlock one or more blocks + */ +static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len) +{ + struct onenand_chip *this = mtd->priv; + int start, end, block, value, status; + + start = ofs >> this->erase_shift; + end = len >> this->erase_shift; + + /* Continuous lock scheme */ + if (this->options & ONENAND_CONT_LOCK) { + /* Set start block address */ + this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Set end block address */ + this->write_word(end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "wp status = 0x%x\n", status); + + return 0; + } + + /* Block lock scheme */ + for (block = start; block < end; block++) { + /* Set start block address */ + this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS); + /* Write unlock command */ + this->command(mtd, ONENAND_CMD_UNLOCK, 0, 0); + + /* There's no return value */ + this->wait(mtd, FL_UNLOCKING); + + /* Sanity check */ + while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS) + & ONENAND_CTRL_ONGO) + continue; + + /* Set block address for read block status */ + value = onenand_block_address(this->device_id, block); + this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); + + /* Check lock status */ + status = this->read_word(this->base + ONENAND_REG_WP_STATUS); + if (!(status & ONENAND_WP_US)) + printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status); + } + + return 0; +} + +/** + * onenand_print_device_info - Print device ID + * @param device device ID + * + * Print device ID + */ +static void onenand_print_device_info(int device) +{ + int vcc, demuxed, ddp, density; + + vcc = device & ONENAND_DEVICE_VCC_MASK; + demuxed = device & ONENAND_DEVICE_IS_DEMUX; + ddp = device & ONENAND_DEVICE_IS_DDP; + density = device >> ONENAND_DEVICE_DENSITY_SHIFT; + printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n", + demuxed ? "" : "Muxed ", + ddp ? "(DDP)" : "", + (16 << density), + vcc ? "2.65/3.3" : "1.8", + device); +} + +static const struct onenand_manufacturers onenand_manuf_ids[] = { + {ONENAND_MFR_SAMSUNG, "Samsung"}, + {ONENAND_MFR_UNKNOWN, "Unknown"} +}; + +/** + * onenand_check_maf - Check manufacturer ID + * @param manuf manufacturer ID + * + * Check manufacturer ID + */ +static int onenand_check_maf(int manuf) +{ + int i; + + for (i = 0; onenand_manuf_ids[i].id; i++) { + if (manuf == onenand_manuf_ids[i].id) + break; + } + + printk(KERN_DEBUG "OneNAND Manufacturer: %s\n", + onenand_manuf_ids[i].name); + + return (i != ONENAND_MFR_UNKNOWN); +} + +/** + * onenand_probe - [OneNAND Interface] Probe the OneNAND device + * @param mtd MTD device structure + * + * OneNAND detection method: + * Compare the the values from command with ones from register + */ +static int onenand_probe(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int bram_maf_id, bram_dev_id, maf_id, dev_id; + int version_id; + int density; + + /* Send the command for reading device ID from BootRAM */ + this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM); + + /* Read manufacturer and device IDs from BootRAM */ + bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0); + bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2); + + /* Check manufacturer ID */ + if (onenand_check_maf(bram_maf_id)) + return -ENXIO; + + /* Reset OneNAND to read default register values */ + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM); + + /* Read manufacturer and device IDs from Register */ + maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); + dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); + + /* Check OneNAND device */ + if (maf_id != bram_maf_id || dev_id != bram_dev_id) + return -ENXIO; + + /* Flash device information */ + onenand_print_device_info(dev_id); + this->device_id = dev_id; + + density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT; + this->chipsize = (16 << density) << 20; + + /* OneNAND page size & block size */ + /* The data buffer size is equal to page size */ + mtd->oobblock = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + mtd->oobsize = mtd->oobblock >> 5; + /* Pagers per block is always 64 in OneNAND */ + mtd->erasesize = mtd->oobblock << 6; + + this->erase_shift = ffs(mtd->erasesize) - 1; + this->page_shift = ffs(mtd->oobblock) - 1; + this->ppb_shift = (this->erase_shift - this->page_shift); + this->page_mask = (mtd->erasesize / mtd->oobblock) - 1; + + /* REVIST: Multichip handling */ + + mtd->size = this->chipsize; + + /* Version ID */ + version_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); + printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version_id); + + /* Lock scheme */ + if (density <= ONENAND_DEVICE_DENSITY_512Mb && + !(version_id >> ONENAND_VERSION_PROCESS_SHIFT)) { + printk(KERN_INFO "Lock scheme is Continues Lock\n"); + this->options |= ONENAND_CONT_LOCK; + } + + return 0; +} + + +/** + * onenand_scan - [OneNAND Interface] Scan for the OneNAND device + * @param mtd MTD device structure + * @param maxchips Number of chips to scan for + * + * This fills out all the not initialized function pointers + * with the defaults. + * The flash ID is read and the mtd/chip structures are + * filled with the appropriate values. + */ +int onenand_scan(struct mtd_info *mtd, int maxchips) +{ + struct onenand_chip *this = mtd->priv; + + if (!this->read_word) + this->read_word = onenand_readw; + if (!this->write_word) + this->write_word = onenand_writew; + + if (!this->command) + this->command = onenand_command; + if (!this->wait) + this->wait = onenand_wait; + + if (!this->read_bufferram) + this->read_bufferram = onenand_read_bufferram; + if (!this->write_bufferram) + this->write_bufferram = onenand_write_bufferram; + + if (onenand_probe(mtd)) + return -ENXIO; + + this->state = FL_READY; + init_waitqueue_head(&this->wq); + spin_lock_init(&this->chip_lock); + + switch (mtd->oobsize) { + case 64: + this->autooob = &onenand_oob_64; + break; + + case 32: + this->autooob = &onenand_oob_32; + break; + + default: + printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n", + mtd->oobsize); + /* To prevent kernel oops */ + this->autooob = &onenand_oob_32; + break; + } + + memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); + + /* Fill in remaining MTD driver data */ + mtd->type = MTD_NANDFLASH; + mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; + mtd->ecctype = MTD_ECC_SW; + mtd->erase = onenand_erase; + mtd->point = NULL; + mtd->unpoint = NULL; + mtd->read = onenand_read; + mtd->write = onenand_write; + mtd->read_ecc = onenand_read_ecc; + mtd->write_ecc = onenand_write_ecc; + mtd->read_oob = onenand_read_oob; + mtd->write_oob = onenand_write_oob; + mtd->readv = NULL; + mtd->readv_ecc = NULL; + mtd->writev = onenand_writev; + mtd->writev_ecc = onenand_writev_ecc; + mtd->sync = onenand_sync; + mtd->lock = NULL; + mtd->unlock = onenand_unlock; + mtd->suspend = NULL; + mtd->resume = NULL; + mtd->block_isbad = onenand_block_isbad; + mtd->block_markbad = onenand_block_markbad; + mtd->owner = THIS_MODULE; + + /* Unlock whole block */ + mtd->unlock(mtd, 0x0, this->chipsize); + + return 0; +} + +/** + * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device + * @param mtd MTD device structure + */ +void onenand_release(struct mtd_info *mtd) +{ +#ifdef CONFIG_MTD_PARTITIONS + /* Deregister partitions */ + del_mtd_partitions (mtd); +#endif + /* Deregister the device */ + del_mtd_device (mtd); +} + +EXPORT_SYMBOL_GPL(onenand_scan); +EXPORT_SYMBOL_GPL(onenand_release); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kyungmin Park "); +MODULE_DESCRIPTION("Generic OneNAND flash driver code"); diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h new file mode 100644 index 000000000000..b9a64117d646 --- /dev/null +++ b/include/linux/mtd/onenand.h @@ -0,0 +1,134 @@ +/* + * linux/include/linux/mtd/onenand.h + * + * Copyright (C) 2005 Samsung Electronics + * Kyungmin Park + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_ONENAND_H +#define __LINUX_MTD_ONENAND_H + +#include +#include + +#define MAX_BUFFERRAM 2 + +/* Scan and identify a OneNAND device */ +extern int onenand_scan(struct mtd_info *mtd, int max_chips); +/* Free resources held by the OneNAND device */ +extern void onenand_release(struct mtd_info *mtd); + +/** + * onenand_state_t - chip states + * Enumeration for OneNAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING, + FL_UNLOCKING, + FL_LOCKING, +} onenand_state_t; + +/** + * struct onenand_bufferram - OneNAND BufferRAM Data + * @param block block address in BufferRAM + * @param page page address in BufferRAM + * @param valid valid flag + */ +struct onenand_bufferram { + int block; + int page; + int valid; +}; + +/** + * struct onenand_chip - OneNAND Private Flash Chip Data + * @param base [BOARDSPECIFIC] address to access OneNAND + * @param chipsize [INTERN] the size of one chip for multichip arrays + * @param device_id [INTERN] device ID + * @param verstion_id [INTERN] version ID + * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about + * @param erase_shift [INTERN] number of address bits in a block + * @param page_shift [INTERN] number of address bits in a page + * @param ppb_shift [INTERN] number of address bits in a pages per block + * @param page_mask [INTERN] a page per block mask + * @param bufferam_index [INTERN] BufferRAM index + * @param bufferam [INTERN] BufferRAM info + * @param readw [REPLACEABLE] hardware specific function for read short + * @param writew [REPLACEABLE] hardware specific function for write short + * @param command [REPLACEABLE] hardware specific function for writing commands to the chip + * @param wait [REPLACEABLE] hardware specific function for wait on ready + * @param read_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param write_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip + * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress + * @param state [INTERN] the current state of the OneNAND device + * @param autooob [REPLACEABLE] the default (auto)placement scheme + * @param priv [OPTIONAL] pointer to private chip date + */ +struct onenand_chip { + void __iomem *base; + unsigned int chipsize; + unsigned int device_id; + unsigned int options; + + unsigned int erase_shift; + unsigned int page_shift; + unsigned int ppb_shift; /* Pages per block shift */ + unsigned int page_mask; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; + + int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len); + int (*wait)(struct mtd_info *mtd, int state); + int (*read_bufferram)(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count); + int (*write_bufferram)(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, size_t count); + unsigned short (*read_word)(void __iomem *addr); + void (*write_word)(unsigned short value, void __iomem *addr); + + spinlock_t chip_lock; + wait_queue_head_t wq; + onenand_state_t state; + + struct nand_oobinfo *autooob; + + void *priv; +}; + +#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) +#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) +#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) + +/* + * Options bits + */ +#define ONENAND_CONT_LOCK (0x0001) + + +/* + * OneNAND Flash Manufacturer ID Codes + */ +#define ONENAND_MFR_SAMSUNG 0xec +#define ONENAND_MFR_UNKNOWN 0x00 + +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @param name: Manufacturer name + * @param id: manufacturer ID code of device. +*/ +struct onenand_manufacturers { + int id; + char *name; +}; + +#endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h new file mode 100644 index 000000000000..4a2daad7d738 --- /dev/null +++ b/include/linux/mtd/onenand_regs.h @@ -0,0 +1,167 @@ +/* + * linux/include/linux/mtd/onenand_regs.h + * + * OneNAND Register header file + * + * Copyright (C) 2005 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ONENAND_REG_H +#define __ONENAND_REG_H + +/* Memory Address Map Translation (Word order) */ +#define ONENAND_MEMORY_MAP(x) ((x) << 1) + +/* + * External BufferRAM area + */ +#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) +#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) +#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) + +/* + * OneNAND Registers + */ +#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) +#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) +#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) +#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) +#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) +#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) +#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) + +#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) +#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) +#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) +#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) +#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) +#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) +#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) +#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) + +#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) +#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) +#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) +#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) +#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) +#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) +#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) +#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) +#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) + +#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) +#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) +#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) +#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) +#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) +#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) +#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) +#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) +#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) + +/* + * Device ID Register F001h (R) + */ +#define ONENAND_DEVICE_DENSITY_SHIFT (4) +#define ONENAND_DEVICE_IS_DDP (1 << 3) +#define ONENAND_DEVICE_IS_DEMUX (1 << 2) +#define ONENAND_DEVICE_VCC_MASK (0x3) + +#define ONENAND_DEVICE_DENSITY_512Mb (0x002) + +/* + * Version ID Register F002h (R) + */ +#define ONENAND_VERSION_PROCESS_SHIFT (8) + +/* + * Start Address 1 F100h (R/W) + */ +#define ONENAND_DDP_SHIFT (15) + +/* + * Start Address 8 F107h (R/W) + */ +#define ONENAND_FPA_MASK (0x3f) +#define ONENAND_FPA_SHIFT (2) +#define ONENAND_FSA_MASK (0x03) + +/* + * Start Buffer Register F200h (R/W) + */ +#define ONENAND_BSA_MASK (0x03) +#define ONENAND_BSA_SHIFT (8) +#define ONENAND_BSA_BOOTRAM (0 << 2) +#define ONENAND_BSA_DATARAM0 (2 << 2) +#define ONENAND_BSA_DATARAM1 (3 << 2) +#define ONENAND_BSC_MASK (0x03) + +/* + * Command Register F220h (R/W) + */ +#define ONENAND_CMD_READ (0x00) +#define ONENAND_CMD_READOOB (0x13) +#define ONENAND_CMD_PROG (0x80) +#define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_UNLOCK (0x23) +#define ONENAND_CMD_LOCK (0x2A) +#define ONENAND_CMD_LOCK_TIGHT (0x2C) +#define ONENAND_CMD_ERASE (0x94) +#define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_READID (0x90) + +/* NOTE: Those are not *REAL* commands */ +#define ONENAND_CMD_BUFFERRAM (0x1978) + +/* + * System Configuration 1 Register F221h (R, R/W) + */ +#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) +#define ONENAND_SYS_CFG1_BRL (1 << 12) +#define ONENAND_SYS_CFG1_BL (1 << 9) +#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) +#define ONENAND_SYS_CFG1_RDY (1 << 7) +#define ONENAND_SYS_CFG1_INT (1 << 6) +#define ONENAND_SYS_CFG1_IOBE (1 << 5) +#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) + +/* + * Controller Status Register F240h (R) + */ +#define ONENAND_CTRL_ONGO (1 << 15) +#define ONENAND_CTRL_LOCK (1 << 14) +#define ONENAND_CTRL_LOAD (1 << 13) +#define ONENAND_CTRL_PROGRAM (1 << 12) +#define ONENAND_CTRL_ERASE (1 << 11) +#define ONENAND_CTRL_ERROR (1 << 10) +#define ONENAND_CTRL_RSTB (1 << 7) + +/* + * Interrupt Status Register F241h (R) + */ +#define ONENAND_INT_MASTER (1 << 15) +#define ONENAND_INT_READ (1 << 7) +#define ONENAND_INT_WRITE (1 << 6) +#define ONENAND_INT_ERASE (1 << 5) +#define ONENAND_INT_RESET (1 << 4) +#define ONENAND_INT_CLEAR (0 << 0) + +/* + * NAND Flash Write Protection Status Register F24Eh (R) + */ +#define ONENAND_WP_US (1 << 2) +#define ONENAND_WP_LS (1 << 1) +#define ONENAND_WP_LTS (1 << 0) + +/* + * ECC Status Reigser FF00h (R) + */ +#define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_2BIT (1 << 1) +#define ONENAND_ECC_2BIT_ALL (0xAAAA) + +#endif /* __ONENAND_REG_H */ -- cgit v1.2.3 From 97894cda5773e59bd13e87b72077751099419a9f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Nov 2005 11:15:26 +0000 Subject: [MTD] core: Clean up trailing white spaces Signed-off-by: Thomas Gleixner --- drivers/mtd/Kconfig | 32 ++++++------ drivers/mtd/afs.c | 16 +++--- drivers/mtd/cmdlinepart.c | 56 ++++++++++---------- drivers/mtd/ftl.c | 128 +++++++++++++++++++++++----------------------- drivers/mtd/inftlcore.c | 48 ++++++++--------- drivers/mtd/inftlmount.c | 20 ++++---- drivers/mtd/mtd_blkdevs.c | 24 ++++----- drivers/mtd/mtdblock.c | 44 ++++++++-------- drivers/mtd/mtdchar.c | 60 +++++++++++----------- drivers/mtd/mtdconcat.c | 6 +-- drivers/mtd/mtdcore.c | 18 +++---- drivers/mtd/mtdpart.c | 92 ++++++++++++++++----------------- drivers/mtd/nftlcore.c | 80 ++++++++++++++--------------- drivers/mtd/nftlmount.c | 56 ++++++++++---------- drivers/mtd/redboot.c | 4 +- drivers/mtd/rfd_ftl.c | 114 ++++++++++++++++++++--------------------- 16 files changed, 399 insertions(+), 399 deletions(-) (limited to 'drivers/mtd/Kconfig') diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 3dbfbafb3481..f6b775e63ac8 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,4 +1,4 @@ -# $Id: Kconfig,v 1.10 2005/07/11 10:39:27 gleixner Exp $ +# $Id: Kconfig,v 1.11 2005/11/07 11:14:19 gleixner Exp $ menu "Memory Technology Devices (MTD)" @@ -10,7 +10,7 @@ config MTD will provide the generic support for MTD drivers to register themselves with the kernel and for potential users of MTD devices to enumerate the devices which are present and obtain a handle on - them. It will also allow you to select individual drivers for + them. It will also allow you to select individual drivers for particular hardware and users of MTD devices. If unsure, say N. config MTD_DEBUG @@ -61,11 +61,11 @@ config MTD_REDBOOT_PARTS If you need code which can detect and parse this table, and register MTD 'partitions' corresponding to each image in the table, enable - this option. + this option. You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. The - SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for + for your particular device. It won't happen automatically. The + SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for example. config MTD_REDBOOT_DIRECTORY_BLOCK @@ -81,10 +81,10 @@ config MTD_REDBOOT_DIRECTORY_BLOCK partition table. A zero or positive value gives an absolete erase block number. A negative value specifies a number of sectors before the end of the device. - + For example "2" means block number 2, "-1" means the last block and "-2" means the penultimate block. - + config MTD_REDBOOT_PARTS_UNALLOCATED bool " Include unallocated flash regions" depends on MTD_REDBOOT_PARTS @@ -105,11 +105,11 @@ config MTD_CMDLINE_PARTS ---help--- Allow generic configuration of the MTD paritition tables via the kernel command line. Multiple flash resources are supported for hardware where - different kinds of flash memory are available. + different kinds of flash memory are available. You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. The - SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for + for your particular device. It won't happen automatically. The + SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for example. The format for the command line is as follows: @@ -118,12 +118,12 @@ config MTD_CMDLINE_PARTS := :[,] := [@offset][][ro] := unique id used in mapping driver/device - := standard linux memsize OR "-" to denote all + := standard linux memsize OR "-" to denote all remaining space := (NAME) - Due to the way Linux handles the command line, no spaces are - allowed in the partition definition, including mtd id's and partition + Due to the way Linux handles the command line, no spaces are + allowed in the partition definition, including mtd id's and partition names. Examples: @@ -240,7 +240,7 @@ config INFTL tristate "INFTL (Inverse NAND Flash Translation Layer) support" depends on MTD ---help--- - This provides support for the Inverse NAND Flash Translation + This provides support for the Inverse NAND Flash Translation Layer which is used on M-Systems' newer DiskOnChip devices. It uses a kind of pseudo-file system on a flash device to emulate a block device with 512-byte sectors, on top of which you put @@ -257,8 +257,8 @@ config RFD_FTL tristate "Resident Flash Disk (Flash Translation Layer) support" depends on MTD ---help--- - This provides support for the flash translation layer known - as the Resident Flash Disk (RFD), as used by the Embedded BIOS + This provides support for the flash translation layer known + as the Resident Flash Disk (RFD), as used by the Embedded BIOS of General Software. There is a blurb at: http://www.gensw.com/pages/prod/bios/rfd.htm diff --git a/drivers/mtd/afs.c b/drivers/mtd/afs.c index 7363e101eb0f..6a45be04564b 100644 --- a/drivers/mtd/afs.c +++ b/drivers/mtd/afs.c @@ -1,27 +1,27 @@ /*====================================================================== drivers/mtd/afs.c: ARM Flash Layout/Partitioning - + Copyright (C) 2000 ARM Limited - + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - - This is access code for flashes using ARM's flash partitioning + + This is access code for flashes using ARM's flash partitioning standards. - $Id: afs.c,v 1.13 2004/02/27 22:09:59 rmk Exp $ + $Id: afs.c,v 1.15 2005/11/07 11:14:19 gleixner Exp $ ======================================================================*/ @@ -163,7 +163,7 @@ afs_read_iis(struct mtd_info *mtd, struct image_info_struct *iis, u_int ptr) return ret; } -static int parse_afs_partitions(struct mtd_info *mtd, +static int parse_afs_partitions(struct mtd_info *mtd, struct mtd_partition **pparts, unsigned long origin) { diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index ef24837019d3..6b8bb2e4dcfd 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -1,24 +1,24 @@ /* - * $Id: cmdlinepart.c,v 1.18 2005/06/07 15:04:26 joern Exp $ + * $Id: cmdlinepart.c,v 1.19 2005/11/07 11:14:19 gleixner Exp $ * * Read flash partition table from command line * * Copyright 2002 SYSGO Real-Time Solutions GmbH * * The format for the command line is as follows: - * + * * mtdparts=[; := :[,] * := [@offset][][ro] * := unique name used in mapping driver/device (mtd->name) * := standard linux memsize OR "-" to denote all remaining space * := '(' NAME ')' - * + * * Examples: - * + * * 1 NOR Flash, with 1 single writable partition: * edb7312-nor:- - * + * * 1 NOR Flash with 2 partitions, 1 NAND with one * edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home) */ @@ -60,17 +60,17 @@ static int cmdline_parsed = 0; /* * Parse one partition definition for an MTD. Since there can be many - * comma separated partition definitions, this function calls itself + * comma separated partition definitions, this function calls itself * recursively until no more partition definitions are found. Nice side * effect: the memory to keep the mtd_partition structs and the names * is allocated upon the last definition being found. At that point the * syntax has been verified ok. */ -static struct mtd_partition * newpart(char *s, +static struct mtd_partition * newpart(char *s, char **retptr, int *num_parts, - int this_part, - unsigned char **extra_mem_ptr, + int this_part, + unsigned char **extra_mem_ptr, int extra_mem_size) { struct mtd_partition *parts; @@ -102,7 +102,7 @@ static struct mtd_partition * newpart(char *s, mask_flags = 0; /* this is going to be a regular partition */ delim = 0; /* check for offset */ - if (*s == '@') + if (*s == '@') { s++; offset = memparse(s, &s); @@ -112,7 +112,7 @@ static struct mtd_partition * newpart(char *s, { delim = ')'; } - + if (delim) { char *p; @@ -131,12 +131,12 @@ static struct mtd_partition * newpart(char *s, name = NULL; name_len = 13; /* Partition_000 */ } - + /* record name length for memory allocation later */ extra_mem_size += name_len + 1; /* test for options */ - if (strncmp(s, "ro", 2) == 0) + if (strncmp(s, "ro", 2) == 0) { mask_flags |= MTD_WRITEABLE; s += 2; @@ -151,7 +151,7 @@ static struct mtd_partition * newpart(char *s, return NULL; } /* more partitions follow, parse them */ - if ((parts = newpart(s + 1, &s, num_parts, + if ((parts = newpart(s + 1, &s, num_parts, this_part + 1, &extra_mem, extra_mem_size)) == 0) return NULL; } @@ -187,7 +187,7 @@ static struct mtd_partition * newpart(char *s, extra_mem += name_len + 1; dbg(("partition %d: name <%s>, offset %x, size %x, mask flags %x\n", - this_part, + this_part, parts[this_part].name, parts[this_part].offset, parts[this_part].size, @@ -204,8 +204,8 @@ static struct mtd_partition * newpart(char *s, return parts; } -/* - * Parse the command line. +/* + * Parse the command line. */ static int mtdpart_setup_real(char *s) { @@ -230,7 +230,7 @@ static int mtdpart_setup_real(char *s) dbg(("parsing <%s>\n", p+1)); - /* + /* * parse one mtd. have it reserve memory for the * struct cmdline_mtd_partition and the mtd-id string. */ @@ -239,7 +239,7 @@ static int mtdpart_setup_real(char *s) &num_parts, /* out: number of parts */ 0, /* first partition */ (unsigned char**)&this_mtd, /* out: extra mem */ - mtd_id_len + 1 + sizeof(*this_mtd) + + mtd_id_len + 1 + sizeof(*this_mtd) + sizeof(void*)-1 /*alignment*/); if(!parts) { @@ -254,21 +254,21 @@ static int mtdpart_setup_real(char *s) } /* align this_mtd */ - this_mtd = (struct cmdline_mtd_partition *) + this_mtd = (struct cmdline_mtd_partition *) ALIGN((unsigned long)this_mtd, sizeof(void*)); - /* enter results */ + /* enter results */ this_mtd->parts = parts; this_mtd->num_parts = num_parts; this_mtd->mtd_id = (char*)(this_mtd + 1); strlcpy(this_mtd->mtd_id, mtd_id, mtd_id_len + 1); /* link into chain */ - this_mtd->next = partitions; + this_mtd->next = partitions; partitions = this_mtd; - dbg(("mtdid=<%s> num_parts=<%d>\n", + dbg(("mtdid=<%s> num_parts=<%d>\n", this_mtd->mtd_id, this_mtd->num_parts)); - + /* EOS - we're done */ if (*s == 0) @@ -292,7 +292,7 @@ static int mtdpart_setup_real(char *s) * information. It returns partitions for the requested mtd device, or * the first one in the chain if a NULL mtd_id is passed in. */ -static int parse_cmdline_partitions(struct mtd_info *master, +static int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long origin) { @@ -322,7 +322,7 @@ static int parse_cmdline_partitions(struct mtd_info *master, part->parts[i].size = master->size - offset; if (offset + part->parts[i].size > master->size) { - printk(KERN_WARNING ERRP + printk(KERN_WARNING ERRP "%s: partitioning exceeds flash size, truncating\n", part->mtd_id); part->parts[i].size = master->size - offset; @@ -338,8 +338,8 @@ static int parse_cmdline_partitions(struct mtd_info *master, } -/* - * This is the handler for our kernel parameter, called from +/* + * This is the handler for our kernel parameter, called from * main.c::checksetup(). Note that we can not yet kmalloc() anything, * so we only save the commandline for later processing. * diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index d32c1b3a8ce3..de7e231d6d18 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -1,5 +1,5 @@ /* This version ported to the Linux-MTD system by dwmw2@infradead.org - * $Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $ + * $Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $ * * Fixes: Arnaldo Carvalho de Melo * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups @@ -53,7 +53,7 @@ Use of the FTL format for non-PCMCIA applications may be an infringement of these patents. For additional information, contact M-Systems (http://www.m-sys.com) directly. - + ======================================================================*/ #include #include @@ -160,7 +160,7 @@ static void ftl_erase_callback(struct erase_info *done); Scan_header() checks to see if a memory region contains an FTL partition. build_maps() reads all the erase unit headers, builds the erase unit map, and then builds the virtual page map. - + ======================================================================*/ static int scan_header(partition_t *part) @@ -176,10 +176,10 @@ static int scan_header(partition_t *part) (offset + sizeof(header)) < max_offset; offset += part->mbd.mtd->erasesize ? : 0x2000) { - err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, + err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret, (unsigned char *)&header); - - if (err) + + if (err) return err; if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break; @@ -232,10 +232,10 @@ static int build_maps(partition_t *part) for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) { offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN)) << part->header.EraseUnitSize); - ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, + ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval, (unsigned char *)&header); - - if (ret) + + if (ret) goto out_XferInfo; ret = -1; @@ -274,7 +274,7 @@ static int build_maps(partition_t *part) "don't add up!\n"); goto out_XferInfo; } - + /* Set up virtual page map */ blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize; part->VirtualBlockMap = vmalloc(blocks * sizeof(u_int32_t)); @@ -296,12 +296,12 @@ static int build_maps(partition_t *part) part->EUNInfo[i].Free = 0; part->EUNInfo[i].Deleted = 0; offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset); - - ret = part->mbd.mtd->read(part->mbd.mtd, offset, - part->BlocksPerUnit * sizeof(u_int32_t), &retval, + + ret = part->mbd.mtd->read(part->mbd.mtd, offset, + part->BlocksPerUnit * sizeof(u_int32_t), &retval, (unsigned char *)part->bam_cache); - - if (ret) + + if (ret) goto out_bam_cache; for (j = 0; j < part->BlocksPerUnit; j++) { @@ -316,7 +316,7 @@ static int build_maps(partition_t *part) part->EUNInfo[i].Deleted++; } } - + ret = 0; goto out; @@ -336,7 +336,7 @@ out: Erase_xfer() schedules an asynchronous erase operation for a transfer unit. - + ======================================================================*/ static int erase_xfer(partition_t *part, @@ -351,10 +351,10 @@ static int erase_xfer(partition_t *part, xfer->state = XFER_ERASING; /* Is there a free erase slot? Always in MTD. */ - - + + erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL); - if (!erase) + if (!erase) return -ENOMEM; erase->mtd = part->mbd.mtd; @@ -362,7 +362,7 @@ static int erase_xfer(partition_t *part, erase->addr = xfer->Offset; erase->len = 1 << part->header.EraseUnitSize; erase->priv = (u_long)part; - + ret = part->mbd.mtd->erase(part->mbd.mtd, erase); if (!ret) @@ -377,7 +377,7 @@ static int erase_xfer(partition_t *part, Prepare_xfer() takes a freshly erased transfer unit and gives it an appropriate header. - + ======================================================================*/ static void ftl_erase_callback(struct erase_info *erase) @@ -385,7 +385,7 @@ static void ftl_erase_callback(struct erase_info *erase) partition_t *part; struct xfer_info_t *xfer; int i; - + /* Look up the transfer unit */ part = (partition_t *)(erase->priv); @@ -422,7 +422,7 @@ static int prepare_xfer(partition_t *part, int i) xfer = &part->XferInfo[i]; xfer->state = XFER_FAILED; - + DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset); /* Write the transfer unit header */ @@ -446,7 +446,7 @@ static int prepare_xfer(partition_t *part, int i) for (i = 0; i < nbam; i++, offset += sizeof(u_int32_t)) { - ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), + ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int32_t), &retlen, (u_char *)&ctl); if (ret) @@ -454,7 +454,7 @@ static int prepare_xfer(partition_t *part, int i) } xfer->state = XFER_PREPARED; return 0; - + } /* prepare_xfer */ /*====================================================================== @@ -466,7 +466,7 @@ static int prepare_xfer(partition_t *part, int i) All data blocks are copied to the corresponding blocks in the target unit, so the virtual block map does not need to be updated. - + ======================================================================*/ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, @@ -486,14 +486,14 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, xfer = &part->XferInfo[xferunit]; DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n", eun->Offset, xfer->Offset); - - + + /* Read current BAM */ if (part->bam_index != srcunit) { offset = eun->Offset + le32_to_cpu(part->header.BAMOffset); - ret = part->mbd.mtd->read(part->mbd.mtd, offset, + ret = part->mbd.mtd->read(part->mbd.mtd, offset, part->BlocksPerUnit * sizeof(u_int32_t), &retlen, (u_char *) (part->bam_cache)); @@ -501,11 +501,11 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, part->bam_index = 0xffff; if (ret) { - printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); + printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n"); return ret; } } - + /* Write the LogicalEUN for the transfer unit */ xfer->state = XFER_UNKNOWN; offset = xfer->Offset + 20; /* Bad! */ @@ -513,12 +513,12 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(u_int16_t), &retlen, (u_char *) &unit); - + if (ret) { printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n"); return ret; } - + /* Copy all data blocks from source unit to transfer unit */ src = eun->Offset; dest = xfer->Offset; @@ -558,15 +558,15 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, } /* Write the BAM to the transfer unit */ - ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), - part->BlocksPerUnit * sizeof(int32_t), &retlen, + ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset), + part->BlocksPerUnit * sizeof(int32_t), &retlen, (u_char *)part->bam_cache); if (ret) { printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n"); return ret; } - + /* All clear? Then update the LogicalEUN again */ ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(u_int16_t), &retlen, (u_char *)&srcunitswap); @@ -574,9 +574,9 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, if (ret) { printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n"); return ret; - } - - + } + + /* Update the maps and usage stats*/ i = xfer->EraseCount; xfer->EraseCount = eun->EraseCount; @@ -588,10 +588,10 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, part->FreeTotal += free; eun->Free = free; eun->Deleted = 0; - + /* Now, the cache should be valid for the new block */ part->bam_index = srcunit; - + return 0; } /* copy_erase_unit */ @@ -608,7 +608,7 @@ static int copy_erase_unit(partition_t *part, u_int16_t srcunit, oldest data unit instead. This means that we generally postpone the next reclaimation as long as possible, but shuffle static stuff around a bit for wear leveling. - + ======================================================================*/ static int reclaim_block(partition_t *part) @@ -666,7 +666,7 @@ static int reclaim_block(partition_t *part) else DEBUG(1, "ftl_cs: reclaim failed: no " "suitable transfer units!\n"); - + return -EIO; } } @@ -715,7 +715,7 @@ static int reclaim_block(partition_t *part) returns the block index -- the erase unit is just the currently cached unit. If there are no free blocks, it returns 0 -- this is never a valid data block because it contains the header. - + ======================================================================*/ #ifdef PSYCHO_DEBUG @@ -737,7 +737,7 @@ static u_int32_t find_free(partition_t *part) u_int32_t blk; size_t retlen; int ret; - + /* Find an erase unit with some free space */ stop = (part->bam_index == 0xffff) ? 0 : part->bam_index; eun = stop; @@ -749,17 +749,17 @@ static u_int32_t find_free(partition_t *part) if (part->EUNInfo[eun].Free == 0) return 0; - + /* Is this unit's BAM cached? */ if (eun != part->bam_index) { /* Invalidate cache */ part->bam_index = 0xffff; - ret = part->mbd.mtd->read(part->mbd.mtd, + ret = part->mbd.mtd->read(part->mbd.mtd, part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset), part->BlocksPerUnit * sizeof(u_int32_t), &retlen, (u_char *) (part->bam_cache)); - + if (ret) { printk(KERN_WARNING"ftl: Error reading BAM in find_free\n"); return 0; @@ -781,14 +781,14 @@ static u_int32_t find_free(partition_t *part) } DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun); return blk; - + } /* find_free */ /*====================================================================== Read a series of sectors from an FTL partition. - + ======================================================================*/ static int ftl_read(partition_t *part, caddr_t buffer, @@ -798,7 +798,7 @@ static int ftl_read(partition_t *part, caddr_t buffer, u_long i; int ret; size_t offset, retlen; - + DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n", part, sector, nblocks); if (!(part->state & FTL_FORMATTED)) { @@ -834,7 +834,7 @@ static int ftl_read(partition_t *part, caddr_t buffer, /*====================================================================== Write a series of sectors to an FTL partition - + ======================================================================*/ static int set_bam_entry(partition_t *part, u_int32_t log_addr, @@ -855,7 +855,7 @@ static int set_bam_entry(partition_t *part, u_int32_t log_addr, blk = (log_addr % bsize) / SECTOR_SIZE; offset = (part->EUNInfo[eun].Offset + blk * sizeof(u_int32_t) + le32_to_cpu(part->header.BAMOffset)); - + #ifdef PSYCHO_DEBUG ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(u_int32_t), &retlen, (u_char *)&old_addr); @@ -925,7 +925,7 @@ static int ftl_write(partition_t *part, caddr_t buffer, if (ret) return ret; } - + bsize = 1 << part->header.EraseUnitSize; virt_addr = sector * SECTOR_SIZE | BLOCK_DATA; @@ -949,12 +949,12 @@ static int ftl_write(partition_t *part, caddr_t buffer, log_addr = part->bam_index * bsize + blk * SECTOR_SIZE; part->EUNInfo[part->bam_index].Free--; part->FreeTotal--; - if (set_bam_entry(part, log_addr, 0xfffffffe)) + if (set_bam_entry(part, log_addr, 0xfffffffe)) return -EIO; part->EUNInfo[part->bam_index].Deleted++; offset = (part->EUNInfo[part->bam_index].Offset + blk * SECTOR_SIZE); - ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, + ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen, buffer); if (ret) { @@ -964,7 +964,7 @@ static int ftl_write(partition_t *part, caddr_t buffer, offset); return -EIO; } - + /* Only delete the old entry when the new entry is ready */ old_addr = part->VirtualBlockMap[sector+i]; if (old_addr != 0xffffffff) { @@ -979,7 +979,7 @@ static int ftl_write(partition_t *part, caddr_t buffer, return -EIO; part->VirtualBlockMap[sector+i] = log_addr; part->EUNInfo[part->bam_index].Deleted--; - + buffer += SECTOR_SIZE; virt_addr += SECTOR_SIZE; } @@ -1034,20 +1034,20 @@ static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) partition_t *partition; partition = kmalloc(sizeof(partition_t), GFP_KERNEL); - + if (!partition) { printk(KERN_WARNING "No memory to scan for FTL on %s\n", mtd->name); return; - } + } memset(partition, 0, sizeof(partition_t)); partition->mbd.mtd = mtd; - if ((scan_header(partition) == 0) && + if ((scan_header(partition) == 0) && (build_maps(partition) == 0)) { - + partition->state = FTL_FORMATTED; #ifdef PCMCIA_DEBUG printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n", @@ -1086,7 +1086,7 @@ struct mtd_blktrans_ops ftl_tr = { int init_ftl(void) { - DEBUG(0, "$Id: ftl.c,v 1.55 2005/01/17 13:47:21 hvr Exp $\n"); + DEBUG(0, "$Id: ftl.c,v 1.58 2005/11/07 11:14:19 gleixner Exp $\n"); return register_mtd_blktrans(&ftl_tr); } diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 39eb53f6551f..8db8618c18d2 100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c @@ -1,4 +1,4 @@ -/* +/* * inftlcore.c -- Linux driver for Inverse Flash Translation Layer (INFTL) * * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) @@ -7,7 +7,7 @@ * (c) 1999 Machine Vision Holdings, Inc. * Author: David Woodhouse * - * $Id: inftlcore.c,v 1.18 2004/11/16 18:28:59 dwmw2 Exp $ + * $Id: inftlcore.c,v 1.19 2005/11/07 11:14:20 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -113,14 +113,14 @@ static void inftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (inftl->mbd.size != inftl->heads * inftl->cylinders * inftl->sectors) { /* - Oh no we don't have + Oh no we don't have mbd.size == heads * cylinders * sectors */ printk(KERN_WARNING "INFTL: cannot calculate a geometry to " "match size of 0x%lx.\n", inftl->mbd.size); printk(KERN_WARNING "INFTL: using C:%d H:%d S:%d " "(== 0x%lx sects)\n", - inftl->cylinders, inftl->heads , inftl->sectors, + inftl->cylinders, inftl->heads , inftl->sectors, (long)inftl->cylinders * (long)inftl->heads * (long)inftl->sectors ); } @@ -223,7 +223,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned "Virtual Unit Chain %d!\n", thisVUC); return BLOCK_NIL; } - + /* * Scan to find the Erase Unit which holds the actual data for each * 512-byte block within the Chain. @@ -264,7 +264,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned "Unit Chain 0x%x\n", thisVUC); return BLOCK_NIL; } - + thisEUN = inftl->PUtable[thisEUN]; } @@ -295,15 +295,15 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned */ if (BlockMap[block] == BLOCK_NIL) continue; - + ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize * BlockMap[block]) + (block * SECTORSIZE), SECTORSIZE, - &retlen, movebuf); + &retlen, movebuf); if (ret < 0) { ret = MTD_READ(inftl->mbd.mtd, (inftl->EraseSize * BlockMap[block]) + (block * SECTORSIZE), SECTORSIZE, &retlen, movebuf); - if (ret != -EIO) + if (ret != -EIO) DEBUG(MTD_DEBUG_LEVEL1, "INFTL: error went " "away on retry?\n"); } @@ -355,7 +355,7 @@ static u16 INFTL_foldchain(struct INFTLrecord *inftl, unsigned thisVUC, unsigned static u16 INFTL_makefreeblock(struct INFTLrecord *inftl, unsigned pendingblock) { /* - * This is the part that needs some cleverness applied. + * This is the part that needs some cleverness applied. * For now, I'm doing the minimum applicable to actually * get the thing to work. * Wear-levelling and other clever stuff needs to be implemented @@ -414,7 +414,7 @@ static int nrbits(unsigned int val, int bitcount) } /* - * INFTL_findwriteunit: Return the unit number into which we can write + * INFTL_findwriteunit: Return the unit number into which we can write * for this block. Make it available if it isn't already. */ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) @@ -463,10 +463,10 @@ static inline u16 INFTL_findwriteunit(struct INFTLrecord *inftl, unsigned block) * Invalid block. Don't use it any more. * Must implement. */ - break; + break; } - - if (!silly--) { + + if (!silly--) { printk(KERN_WARNING "INFTL: infinite loop in " "Virtual Unit Chain 0x%x\n", thisVUC); return 0xffff; @@ -482,7 +482,7 @@ hitused: /* - * OK. We didn't find one in the existing chain, or there + * OK. We didn't find one in the existing chain, or there * is no existing chain. Allocate a new one. */ writeEUN = INFTL_findfreeblock(inftl, 0); @@ -506,8 +506,8 @@ hitused: if (writeEUN == BLOCK_NIL) { /* * Ouch. This should never happen - we should - * always be able to make some room somehow. - * If we get here, we've allocated more storage + * always be able to make some room somehow. + * If we get here, we've allocated more storage * space than actual media, or our makefreeblock * routine is missing something. */ @@ -518,7 +518,7 @@ hitused: INFTL_dumpVUchains(inftl); #endif return BLOCK_NIL; - } + } } /* @@ -543,7 +543,7 @@ hitused: parity |= (nrbits(prev_block, 16) & 0x1) ? 0x2 : 0; parity |= (nrbits(anac, 8) & 0x1) ? 0x4 : 0; parity |= (nrbits(nacs, 8) & 0x1) ? 0x8 : 0; - + oob.u.a.virtualUnitNo = cpu_to_le16(thisVUC); oob.u.a.prevUnitNo = cpu_to_le16(prev_block); oob.u.a.ANAC = anac; @@ -562,7 +562,7 @@ hitused: oob.u.b.parityPerField = parity; oob.u.b.discarded = 0xaa; - MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + + MTD_WRITEOOB(inftl->mbd.mtd, writeEUN * inftl->EraseSize + SECTORSIZE * 4 + 8, 8, &retlen, (char *)&oob.u); inftl->PUtable[writeEUN] = inftl->VUtable[thisVUC]; @@ -602,7 +602,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC) "Virtual Unit Chain %d!\n", thisVUC); return; } - + /* * Scan through the Erase Units to determine whether any data is in * each of the 512-byte blocks within the Chain. @@ -642,7 +642,7 @@ static void INFTL_trydeletechain(struct INFTLrecord *inftl, unsigned thisVUC) "Unit Chain 0x%x\n", thisVUC); return; } - + thisEUN = inftl->PUtable[thisEUN]; } @@ -758,7 +758,7 @@ foundit: return 0; } -static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, +static int inftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, char *buffer) { struct INFTLrecord *inftl = (void *)mbd; @@ -893,7 +893,7 @@ extern char inftlmountrev[]; static int __init init_inftl(void) { - printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.18 $, " + printk(KERN_INFO "INFTL: inftlcore.c $Revision: 1.19 $, " "inftlmount.c %s\n", inftlmountrev); return register_mtd_blktrans(&inftl_tr); diff --git a/drivers/mtd/inftlmount.c b/drivers/mtd/inftlmount.c index e066445320a3..b26aea1f640a 100644 --- a/drivers/mtd/inftlmount.c +++ b/drivers/mtd/inftlmount.c @@ -1,14 +1,14 @@ -/* +/* * inftlmount.c -- INFTL mount code with extensive checks. * * Author: Greg Ungerer (gerg@snapgear.com) * (C) Copyright 2002-2003, Greg Ungerer (gerg@snapgear.com) * * Based heavily on the nftlmount.c code which is: - * Author: Fabrice Bellard (fabrice.bellard@netgem.com) + * Author: Fabrice Bellard (fabrice.bellard@netgem.com) * Copyright (C) 2000 Netgem S.A. * - * $Id: inftlmount.c,v 1.17 2005/08/08 08:56:19 dwmw2 Exp $ + * $Id: inftlmount.c,v 1.18 2005/11/07 11:14:20 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -41,7 +41,7 @@ #include #include -char inftlmountrev[]="$Revision: 1.17 $"; +char inftlmountrev[]="$Revision: 1.18 $"; /* * find_boot_record: Find the INFTL Media Header and its Spare copy which @@ -273,7 +273,7 @@ static int find_boot_record(struct INFTLrecord *inftl) inftl->nb_boot_blocks); return -1; } - + inftl->mbd.size = inftl->numvunits * (inftl->EraseSize / SECTORSIZE); @@ -302,7 +302,7 @@ static int find_boot_record(struct INFTLrecord *inftl) inftl->nb_blocks * sizeof(u16)); return -ENOMEM; } - + /* Mark the blocks before INFTL MediaHeader as reserved */ for (i = 0; i < inftl->nb_boot_blocks; i++) inftl->PUtable[i] = BLOCK_RESERVED; @@ -380,7 +380,7 @@ static int check_free_sectors(struct INFTLrecord *inftl, unsigned int address, * * Return: 0 when succeed, -1 on error. * - * ToDo: 1. Is it neceressary to check_free_sector after erasing ?? + * ToDo: 1. Is it neceressary to check_free_sector after erasing ?? */ int INFTL_formatblock(struct INFTLrecord *inftl, int block) { @@ -578,7 +578,7 @@ int INFTL_mount(struct INFTLrecord *s) printk(KERN_ERR "INFTL: Out of memory.\n"); return -ENOMEM; } - + memset(ANACtable, 0, s->nb_blocks); /* @@ -600,7 +600,7 @@ int INFTL_mount(struct INFTLrecord *s) for (chain_length = 0; ; chain_length++) { - if ((chain_length == 0) && + if ((chain_length == 0) && (s->PUtable[block] != BLOCK_NOTEXPLORED)) { /* Nothing to do here, onto next block */ break; @@ -747,7 +747,7 @@ int INFTL_mount(struct INFTLrecord *s) "in virtual chain %d\n", s->PUtable[block], logical_block); s->PUtable[block] = BLOCK_NIL; - + } if (ANACtable[block] != ANAC) { /* diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index d6cb3d194efb..339cb1218eaa 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -1,5 +1,5 @@ /* - * $Id: mtd_blkdevs.c,v 1.26 2005/07/29 19:42:04 tpoynor Exp $ + * $Id: mtd_blkdevs.c,v 1.27 2005/11/07 11:14:20 gleixner Exp $ * * (C) 2003 David Woodhouse * @@ -85,7 +85,7 @@ static int mtd_blktrans_thread(void *arg) daemonize("%sd", tr->name); /* daemonize() doesn't do this for us since some kernel threads - actually want to deal with signals. We can't just call + actually want to deal with signals. We can't just call exit_sighand() since that'll cause an oops when we finally do exit. */ spin_lock_irq(¤t->sighand->siglock); @@ -94,7 +94,7 @@ static int mtd_blktrans_thread(void *arg) spin_unlock_irq(¤t->sighand->siglock); spin_lock_irq(rq->queue_lock); - + while (!tr->blkcore_priv->exiting) { struct request *req; struct mtd_blktrans_dev *dev; @@ -157,7 +157,7 @@ static int blktrans_open(struct inode *i, struct file *f) if (!try_module_get(tr->owner)) goto out_tr; - /* FIXME: Locking. A hot pluggable device can go away + /* FIXME: Locking. A hot pluggable device can go away (del_mtd_device can be called for it) without its module being unloaded. */ dev->mtd->usecount++; @@ -195,7 +195,7 @@ static int blktrans_release(struct inode *i, struct file *f) } -static int blktrans_ioctl(struct inode *inode, struct file *file, +static int blktrans_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct mtd_blktrans_dev *dev = inode->i_bdev->bd_disk->private_data; @@ -264,7 +264,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) /* Required number was free */ list_add_tail(&new->list, &d->list); goto added; - } + } last_devnum = d->devnum; } if (new->devnum == -1) @@ -288,7 +288,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) gd->major = tr->major; gd->first_minor = (new->devnum) << tr->part_bits; gd->fops = &mtd_blktrans_ops; - + if (tr->part_bits) if (new->devnum < 26) snprintf(gd->disk_name, sizeof(gd->disk_name), @@ -314,7 +314,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) set_disk_ro(gd, 1); add_disk(gd); - + return 0; } @@ -329,7 +329,7 @@ int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old) del_gendisk(old->blkcore_priv); put_disk(old->blkcore_priv); - + return 0; } @@ -368,12 +368,12 @@ static struct mtd_notifier blktrans_notifier = { .add = blktrans_notify_add, .remove = blktrans_notify_remove, }; - + int register_mtd_blktrans(struct mtd_blktrans_ops *tr) { int ret, i; - /* Register the notifier if/when the first device type is + /* Register the notifier if/when the first device type is registered, to prevent the link/init ordering from fucking us over. */ if (!blktrans_notifier.list.next) @@ -416,7 +416,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr) kfree(tr->blkcore_priv); up(&mtd_table_mutex); return ret; - } + } INIT_LIST_HEAD(&tr->devs); list_add(&tr->list, &blktrans_majors); diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c index bee8aba9e5bb..e84756644fd1 100644 --- a/drivers/mtd/mtdblock.c +++ b/drivers/mtd/mtdblock.c @@ -1,7 +1,7 @@ -/* +/* * Direct MTD block device access * - * $Id: mtdblock.c,v 1.67 2005/11/06 10:04:37 gleixner Exp $ + * $Id: mtdblock.c,v 1.68 2005/11/07 11:14:20 gleixner Exp $ * * (C) 2000-2003 Nicolas Pitre * (C) 1999-2003 David Woodhouse @@ -32,7 +32,7 @@ static struct mtdblk_dev { /* * Cache stuff... - * + * * Since typical flash erasable sectors are much larger than what Linux's * buffer cache can handle, we must implement read-modify-write on flash * sectors for each block write requests. To avoid over-erasing flash sectors @@ -46,7 +46,7 @@ static void erase_callback(struct erase_info *done) wake_up(wait_q); } -static int erase_write (struct mtd_info *mtd, unsigned long pos, +static int erase_write (struct mtd_info *mtd, unsigned long pos, int len, const char *buf) { struct erase_info erase; @@ -104,18 +104,18 @@ static int write_cached_data (struct mtdblk_dev *mtdblk) return 0; DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: writing cached data for \"%s\" " - "at 0x%lx, size 0x%x\n", mtd->name, + "at 0x%lx, size 0x%x\n", mtd->name, mtdblk->cache_offset, mtdblk->cache_size); - - ret = erase_write (mtd, mtdblk->cache_offset, + + ret = erase_write (mtd, mtdblk->cache_offset, mtdblk->cache_size, mtdblk->cache_data); if (ret) return ret; /* * Here we could argubly set the cache state to STATE_CLEAN. - * However this could lead to inconsistency since we will not - * be notified if this content is altered on the flash by other + * However this could lead to inconsistency since we will not + * be notified if this content is altered on the flash by other * means. Let's declare it empty and leave buffering tasks to * the buffer cache instead. */ @@ -124,7 +124,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk) } -static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, +static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, int len, const char *buf) { struct mtd_info *mtd = mtdblk->mtd; @@ -134,7 +134,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: write on \"%s\" at 0x%lx, size 0x%x\n", mtd->name, pos, len); - + if (!sect_size) return MTD_WRITE (mtd, pos, len, &retlen, buf); @@ -142,11 +142,11 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, unsigned long sect_start = (pos/sect_size)*sect_size; unsigned int offset = pos - sect_start; unsigned int size = sect_size - offset; - if( size > len ) + if( size > len ) size = len; if (size == sect_size) { - /* + /* * We are covering a whole sector. Thus there is no * need to bother with the cache while it may still be * useful for other partial writes. @@ -160,7 +160,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, if (mtdblk->cache_state == STATE_DIRTY && mtdblk->cache_offset != sect_start) { ret = write_cached_data(mtdblk); - if (ret) + if (ret) return ret; } @@ -193,7 +193,7 @@ static int do_cached_write (struct mtdblk_dev *mtdblk, unsigned long pos, } -static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos, +static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos, int len, char *buf) { struct mtd_info *mtd = mtdblk->mtd; @@ -201,9 +201,9 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos, size_t retlen; int ret; - DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n", + DEBUG(MTD_DEBUG_LEVEL2, "mtdblock: read on \"%s\" at 0x%lx, size 0x%x\n", mtd->name, pos, len); - + if (!sect_size) return MTD_READ (mtd, pos, len, &retlen, buf); @@ -211,7 +211,7 @@ static int do_cached_read (struct mtdblk_dev *mtdblk, unsigned long pos, unsigned long sect_start = (pos/sect_size)*sect_size; unsigned int offset = pos - sect_start; unsigned int size = sect_size - offset; - if (size > len) + if (size > len) size = len; /* @@ -269,12 +269,12 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) int dev = mbd->devnum; DEBUG(MTD_DEBUG_LEVEL1,"mtdblock_open\n"); - + if (mtdblks[dev]) { mtdblks[dev]->count++; return 0; } - + /* OK, it's not open. Create cache info for it */ mtdblk = kmalloc(sizeof(struct mtdblk_dev), GFP_KERNEL); if (!mtdblk) @@ -293,7 +293,7 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd) } mtdblks[dev] = mtdblk; - + DEBUG(MTD_DEBUG_LEVEL1, "ok\n"); return 0; @@ -321,7 +321,7 @@ static int mtdblock_release(struct mtd_blktrans_dev *mbd) DEBUG(MTD_DEBUG_LEVEL1, "ok\n"); return 0; -} +} static int mtdblock_flush(struct mtd_blktrans_dev *dev) { diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index d1ffd246ad55..6f044584bdc6 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1,5 +1,5 @@ /* - * $Id: mtdchar.c,v 1.75 2005/11/06 10:04:37 gleixner Exp $ + * $Id: mtdchar.c,v 1.76 2005/11/07 11:14:20 gleixner Exp $ * * Character-device access to raw MTD devices. * @@ -28,7 +28,7 @@ static void mtd_notify_add(struct mtd_info* mtd) class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2), NULL, "mtd%d", mtd->index); - + class_device_create(mtd_class, NULL, MKDEV(MTD_CHAR_MAJOR, mtd->index*2+1), NULL, "mtd%dro", mtd->index); @@ -108,23 +108,23 @@ static int mtd_open(struct inode *inode, struct file *file) return -EACCES; mtd = get_mtd_device(NULL, devnum); - + if (!mtd) return -ENODEV; - + if (MTD_ABSENT == mtd->type) { put_mtd_device(mtd); return -ENODEV; } file->private_data = mtd; - + /* You can't open it RW if it's not a writeable device */ if ((file->f_mode & 2) && !(mtd->flags & MTD_WRITEABLE)) { put_mtd_device(mtd); return -EACCES; } - + return 0; } /* mtd_open */ @@ -137,10 +137,10 @@ static int mtd_close(struct inode *inode, struct file *file) DEBUG(MTD_DEBUG_LEVEL0, "MTD_close\n"); mtd = TO_MTD(file); - + if (mtd->sync) mtd->sync(mtd); - + put_mtd_device(mtd); return 0; @@ -159,7 +159,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t int ret=0; int len; char *kbuf; - + DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n"); if (*ppos + count > mtd->size) @@ -167,11 +167,11 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t if (!count) return 0; - + /* FIXME: Use kiovec in 2.5 to lock down the user's buffers and pass them directly to the MTD functions */ while (count) { - if (count > MAX_KMALLOC_SIZE) + if (count > MAX_KMALLOC_SIZE) len = MAX_KMALLOC_SIZE; else len = count; @@ -179,7 +179,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t kbuf=kmalloc(len,GFP_KERNEL); if (!kbuf) return -ENOMEM; - + switch (MTD_MODE(file)) { case MTD_MODE_OTP_FACT: ret = mtd->read_fact_prot_reg(mtd, *ppos, len, &retlen, kbuf); @@ -192,7 +192,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t } /* Nand returns -EBADMSG on ecc errors, but it returns * the data. For our userspace tools it is important - * to dump areas with ecc errors ! + * to dump areas with ecc errors ! * Userspace software which accesses NAND this way * must be aware of the fact that it deals with NAND */ @@ -214,7 +214,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t kfree(kbuf); return ret; } - + kfree(kbuf); } @@ -231,10 +231,10 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count int len; DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n"); - + if (*ppos == mtd->size) return -ENOSPC; - + if (*ppos + count > mtd->size) count = mtd->size - *ppos; @@ -242,7 +242,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count return 0; while (count) { - if (count > MAX_KMALLOC_SIZE) + if (count > MAX_KMALLOC_SIZE) len = MAX_KMALLOC_SIZE; else len = count; @@ -257,7 +257,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count kfree(kbuf); return -EFAULT; } - + switch (MTD_MODE(file)) { case MTD_MODE_OTP_FACT: ret = -EROFS; @@ -282,7 +282,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count kfree(kbuf); return ret; } - + kfree(kbuf); } @@ -306,7 +306,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, void __user *argp = (void __user *)arg; int ret = 0; u_long size; - + DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n"); size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT; @@ -318,7 +318,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, if (!access_ok(VERIFY_WRITE, argp, size)) return -EFAULT; } - + switch (cmd) { case MEMGETREGIONCOUNT: if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int))) @@ -370,11 +370,11 @@ static int mtd_ioctl(struct inode *inode, struct file *file, erase->mtd = mtd; erase->callback = mtdchar_erase_callback; erase->priv = (unsigned long)&waitq; - + /* FIXME: Allow INTERRUPTIBLE. Which means not having the wait_queue head on the stack. - + If the wq_head is on the stack, and we leave because we got interrupted, then the wq_head is no longer there when the @@ -402,13 +402,13 @@ static int mtd_ioctl(struct inode *inode, struct file *file, struct mtd_oob_buf buf; void *databuf; ssize_t retlen; - + if(!(file->f_mode & 2)) return -EPERM; if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) return -EFAULT; - + if (buf.length > 0x4096) return -EINVAL; @@ -424,7 +424,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, databuf = kmalloc(buf.length, GFP_KERNEL); if (!databuf) return -ENOMEM; - + if (copy_from_user(databuf, buf.ptr, buf.length)) { kfree(databuf); return -EFAULT; @@ -448,7 +448,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) return -EFAULT; - + if (buf.length > 0x4096) return -EINVAL; @@ -464,14 +464,14 @@ static int mtd_ioctl(struct inode *inode, struct file *file, databuf = kmalloc(buf.length, GFP_KERNEL); if (!databuf) return -ENOMEM; - + ret = (mtd->read_oob)(mtd, buf.start, buf.length, &retlen, databuf); if (put_user(retlen, (uint32_t __user *)argp)) ret = -EFAULT; else if (retlen && copy_to_user(buf.ptr, databuf, retlen)) ret = -EFAULT; - + kfree(databuf); break; } @@ -521,7 +521,7 @@ static int mtd_ioctl(struct inode *inode, struct file *file, case MEMGETBADBLOCK: { loff_t offs; - + if (copy_from_user(&offs, argp, sizeof(loff_t))) return -EFAULT; if (!mtd->block_isbad) diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index eaaafb1de625..b1bf8c411de7 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -7,7 +7,7 @@ * * This code is GPL * - * $Id: mtdconcat.c,v 1.10 2005/11/06 10:04:37 gleixner Exp $ + * $Id: mtdconcat.c,v 1.11 2005/11/07 11:14:20 gleixner Exp $ */ #include @@ -44,7 +44,7 @@ struct mtd_concat { */ #define CONCAT(x) ((struct mtd_concat *)(x)) -/* +/* * MTD methods which look up the relevant subdevice, translate the * effective address and pass through to the subdevice. */ @@ -878,7 +878,7 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[], /* subdevices to c return &concat->mtd; } -/* +/* * This function destroys an MTD object obtained from concat_mtd_devs() */ diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 2c16e051c61a..dade02ab0687 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1,5 +1,5 @@ /* - * $Id: mtdcore.c,v 1.46 2005/08/11 17:13:43 gleixner Exp $ + * $Id: mtdcore.c,v 1.47 2005/11/07 11:14:20 gleixner Exp $ * * Core registration and callback routines for MTD * drivers and users. @@ -25,7 +25,7 @@ #include -/* These are exported solely for the purpose of mtd_blkdevs.c. You +/* These are exported solely for the purpose of mtd_blkdevs.c. You should not use them for _anything_ else */ DECLARE_MUTEX(mtd_table_mutex); struct mtd_info *mtd_table[MAX_MTD_DEVICES]; @@ -66,7 +66,7 @@ int add_mtd_device(struct mtd_info *mtd) struct mtd_notifier *not = list_entry(this, struct mtd_notifier, list); not->add(mtd); } - + up(&mtd_table_mutex); /* We _know_ we aren't being removed, because our caller is still holding us here. So none @@ -75,7 +75,7 @@ int add_mtd_device(struct mtd_info *mtd) __module_get(THIS_MODULE); return 0; } - + up(&mtd_table_mutex); return 1; } @@ -93,13 +93,13 @@ int add_mtd_device(struct mtd_info *mtd) int del_mtd_device (struct mtd_info *mtd) { int ret; - + down(&mtd_table_mutex); if (mtd_table[mtd->index] != mtd) { ret = -ENODEV; } else if (mtd->usecount) { - printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n", + printk(KERN_NOTICE "Removing MTD device #%d (%s) with use count %d\n", mtd->index, mtd->name, mtd->usecount); ret = -EBUSY; } else { @@ -140,7 +140,7 @@ void register_mtd_user (struct mtd_notifier *new) list_add(&new->list, &mtd_notifiers); __module_get(THIS_MODULE); - + for (i=0; i< MAX_MTD_DEVICES; i++) if (mtd_table[i]) new->add(mtd_table[i]); @@ -169,7 +169,7 @@ int unregister_mtd_user (struct mtd_notifier *old) for (i=0; i< MAX_MTD_DEVICES; i++) if (mtd_table[i]) old->remove(mtd_table[i]); - + list_del(&old->list); up(&mtd_table_mutex); return 0; @@ -187,7 +187,7 @@ int unregister_mtd_user (struct mtd_notifier *old) * both, return the num'th driver only if its address matches. Return NULL * if not. */ - + struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num) { struct mtd_info *ret = NULL; diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index e9168b5cd518..99395911d26f 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -5,11 +5,11 @@ * * This code is GPL * - * $Id: mtdpart.c,v 1.54 2005/09/30 14:49:08 dedekind Exp $ + * $Id: mtdpart.c,v 1.55 2005/11/07 11:14:20 gleixner Exp $ * * 02-21-2002 Thomas Gleixner * added support for read_oob, write_oob - */ + */ #include #include @@ -41,13 +41,13 @@ struct mtd_part { */ #define PART(x) ((struct mtd_part *)(x)) - -/* + +/* * MTD methods which simply translate the effective address and pass through * to the _real_ device. */ -static int part_read (struct mtd_info *mtd, loff_t from, size_t len, +static int part_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); @@ -55,15 +55,15 @@ static int part_read (struct mtd_info *mtd, loff_t from, size_t len, len = 0; else if (from + len > mtd->size) len = mtd->size - from; - if (part->master->read_ecc == NULL) - return part->master->read (part->master, from + part->offset, + if (part->master->read_ecc == NULL) + return part->master->read (part->master, from + part->offset, len, retlen, buf); else - return part->master->read_ecc (part->master, from + part->offset, + return part->master->read_ecc (part->master, from + part->offset, len, retlen, buf, NULL, &mtd->oobinfo); } -static int part_point (struct mtd_info *mtd, loff_t from, size_t len, +static int part_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **buf) { struct mtd_part *part = PART(mtd); @@ -71,7 +71,7 @@ static int part_point (struct mtd_info *mtd, loff_t from, size_t len, len = 0; else if (from + len > mtd->size) len = mtd->size - from; - return part->master->point (part->master, from + part->offset, + return part->master->point (part->master, from + part->offset, len, retlen, buf); } static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_t len) @@ -82,7 +82,7 @@ static void part_unpoint (struct mtd_info *mtd, u_char *addr, loff_t from, size_ } -static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, +static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel) { struct mtd_part *part = PART(mtd); @@ -92,11 +92,11 @@ static int part_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, len = 0; else if (from + len > mtd->size) len = mtd->size - from; - return part->master->read_ecc (part->master, from + part->offset, + return part->master->read_ecc (part->master, from + part->offset, len, retlen, buf, eccbuf, oobsel); } -static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len, +static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); @@ -104,15 +104,15 @@ static int part_read_oob (struct mtd_info *mtd, loff_t from, size_t len, len = 0; else if (from + len > mtd->size) len = mtd->size - from; - return part->master->read_oob (part->master, from + part->offset, + return part->master->read_oob (part->master, from + part->offset, len, retlen, buf); } -static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, +static int part_read_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return part->master->read_user_prot_reg (part->master, from, + return part->master->read_user_prot_reg (part->master, from, len, retlen, buf); } @@ -123,11 +123,11 @@ static int part_get_user_prot_info (struct mtd_info *mtd, return part->master->get_user_prot_info (part->master, buf, len); } -static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, +static int part_read_fact_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return part->master->read_fact_prot_reg (part->master, from, + return part->master->read_fact_prot_reg (part->master, from, len, retlen, buf); } @@ -148,13 +148,13 @@ static int part_write (struct mtd_info *mtd, loff_t to, size_t len, len = 0; else if (to + len > mtd->size) len = mtd->size - to; - if (part->master->write_ecc == NULL) - return part->master->write (part->master, to + part->offset, + if (part->master->write_ecc == NULL) + return part->master->write (part->master, to + part->offset, len, retlen, buf); else - return part->master->write_ecc (part->master, to + part->offset, + return part->master->write_ecc (part->master, to + part->offset, len, retlen, buf, NULL, &mtd->oobinfo); - + } static int part_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, @@ -170,7 +170,7 @@ static int part_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, len = 0; else if (to + len > mtd->size) len = mtd->size - to; - return part->master->write_ecc (part->master, to + part->offset, + return part->master->write_ecc (part->master, to + part->offset, len, retlen, buf, eccbuf, oobsel); } @@ -184,19 +184,19 @@ static int part_write_oob (struct mtd_info *mtd, loff_t to, size_t len, len = 0; else if (to + len > mtd->size) len = mtd->size - to; - return part->master->write_oob (part->master, to + part->offset, + return part->master->write_oob (part->master, to + part->offset, len, retlen, buf); } -static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, +static int part_write_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) { struct mtd_part *part = PART(mtd); - return part->master->write_user_prot_reg (part->master, from, + return part->master->write_user_prot_reg (part->master, from, len, retlen, buf); } -static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len) +static int part_lock_user_prot_reg (struct mtd_info *mtd, loff_t from, size_t len) { struct mtd_part *part = PART(mtd); return part->master->lock_user_prot_reg (part->master, from, len); @@ -208,7 +208,7 @@ static int part_writev (struct mtd_info *mtd, const struct kvec *vecs, struct mtd_part *part = PART(mtd); if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; - if (part->master->writev_ecc == NULL) + if (part->master->writev_ecc == NULL) return part->master->writev (part->master, vecs, count, to + part->offset, retlen); else @@ -221,12 +221,12 @@ static int part_readv (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen) { struct mtd_part *part = PART(mtd); - if (part->master->readv_ecc == NULL) + if (part->master->readv_ecc == NULL) return part->master->readv (part->master, vecs, count, from + part->offset, retlen); else return part->master->readv_ecc (part->master, vecs, count, - from + part->offset, retlen, + from + part->offset, retlen, NULL, &mtd->oobinfo); } @@ -252,7 +252,7 @@ static int part_readv_ecc (struct mtd_info *mtd, struct kvec *vecs, if (oobsel == NULL) oobsel = &mtd->oobinfo; return part->master->readv_ecc (part->master, vecs, count, - from + part->offset, retlen, + from + part->offset, retlen, eccbuf, oobsel); } @@ -286,7 +286,7 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback); static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) + if ((len + ofs) > mtd->size) return -EINVAL; return part->master->lock(part->master, ofs + part->offset, len); } @@ -294,7 +294,7 @@ static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len) static int part_unlock (struct mtd_info *mtd, loff_t ofs, size_t len) { struct mtd_part *part = PART(mtd); - if ((len + ofs) > mtd->size) + if ((len + ofs) > mtd->size) return -EINVAL; return part->master->unlock(part->master, ofs + part->offset, len); } @@ -337,8 +337,8 @@ static int part_block_markbad (struct mtd_info *mtd, loff_t ofs) return part->master->block_markbad(part->master, ofs); } -/* - * This function unregisters and destroy all slave MTD objects which are +/* + * This function unregisters and destroy all slave MTD objects which are * attached to the given master MTD object. */ @@ -371,7 +371,7 @@ int del_mtd_partitions(struct mtd_info *master) * (Q: should we register the master MTD object as well?) */ -int add_mtd_partitions(struct mtd_info *master, +int add_mtd_partitions(struct mtd_info *master, const struct mtd_partition *parts, int nbparts) { @@ -414,7 +414,7 @@ int add_mtd_partitions(struct mtd_info *master, slave->mtd.point = part_point; slave->mtd.unpoint = part_unpoint; } - + if (master->read_ecc) slave->mtd.read_ecc = part_read_ecc; if (master->write_ecc) @@ -477,8 +477,8 @@ int add_mtd_partitions(struct mtd_info *master, if (slave->mtd.size == MTDPART_SIZ_FULL) slave->mtd.size = master->size - slave->offset; cur_offset = slave->offset + slave->mtd.size; - - printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset, + + printk (KERN_NOTICE "0x%08x-0x%08x : \"%s\"\n", slave->offset, slave->offset + slave->mtd.size, slave->mtd.name); /* let's do some sanity checks */ @@ -498,7 +498,7 @@ int add_mtd_partitions(struct mtd_info *master, /* Deal with variable erase size stuff */ int i; struct mtd_erase_region_info *regions = master->eraseregions; - + /* Find the first erase regions which is part of this partition. */ for (i=0; i < master->numeraseregions && slave->offset >= regions[i].offset; i++) ; @@ -513,7 +513,7 @@ int add_mtd_partitions(struct mtd_info *master, slave->mtd.erasesize = master->erasesize; } - if ((slave->mtd.flags & MTD_WRITEABLE) && + if ((slave->mtd.flags & MTD_WRITEABLE) && (slave->offset % slave->mtd.erasesize)) { /* Doesn't start on a boundary of major erase size */ /* FIXME: Let it be writable if it is on a boundary of _minor_ erase size though */ @@ -521,14 +521,14 @@ int add_mtd_partitions(struct mtd_info *master, printk ("mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n", parts[i].name); } - if ((slave->mtd.flags & MTD_WRITEABLE) && + if ((slave->mtd.flags & MTD_WRITEABLE) && (slave->mtd.size % slave->mtd.erasesize)) { slave->mtd.flags &= ~MTD_WRITEABLE; printk ("mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n", parts[i].name); } - /* copy oobinfo from master */ + /* copy oobinfo from master */ memcpy(&slave->mtd.oobinfo, &master->oobinfo, sizeof(slave->mtd.oobinfo)); if(parts[i].mtdp) @@ -589,12 +589,12 @@ int deregister_mtd_parser(struct mtd_part_parser *p) return 0; } -int parse_mtd_partitions(struct mtd_info *master, const char **types, +int parse_mtd_partitions(struct mtd_info *master, const char **types, struct mtd_partition **pparts, unsigned long origin) { struct mtd_part_parser *parser; int ret = 0; - + for ( ; ret <= 0 && *types; types++) { parser = get_partition_parser(*types); #ifdef CONFIG_KMOD @@ -608,7 +608,7 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, } ret = (*parser->parse_fn)(master, pparts, origin); if (ret > 0) { - printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", + printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", ret, parser->name, master->name); } put_partition_parser(parser); diff --git a/drivers/mtd/nftlcore.c b/drivers/mtd/nftlcore.c index b2014043634f..89d662999e7b 100644 --- a/drivers/mtd/nftlcore.c +++ b/drivers/mtd/nftlcore.c @@ -1,7 +1,7 @@ /* Linux driver for NAND Flash Translation Layer */ /* (c) 1999 Machine Vision Holdings, Inc. */ /* Author: David Woodhouse */ -/* $Id: nftlcore.c,v 1.97 2004/11/16 18:28:59 dwmw2 Exp $ */ +/* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */ /* The contents of this file are distributed under the GNU General @@ -101,14 +101,14 @@ static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (nftl->mbd.size != nftl->heads * nftl->cylinders * nftl->sectors) { /* - Oh no we don't have + Oh no we don't have mbd.size == heads * cylinders * sectors */ printk(KERN_WARNING "NFTL: cannot calculate a geometry to " "match size of 0x%lx.\n", nftl->mbd.size); printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d " "(== 0x%lx sects)\n", - nftl->cylinders, nftl->heads , nftl->sectors, + nftl->cylinders, nftl->heads , nftl->sectors, (long)nftl->cylinders * (long)nftl->heads * (long)nftl->sectors ); } @@ -178,7 +178,7 @@ static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) if (!silly--) { printk("Argh! No free blocks found! LastFreeEUN = %d, " - "FirstEUN = %d\n", nftl->LastFreeEUN, + "FirstEUN = %d\n", nftl->LastFreeEUN, le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); return 0xffff; } @@ -210,7 +210,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p "Virtual Unit Chain %d!\n", thisVUC); return BLOCK_NIL; } - + /* Scan to find the Erase Unit which holds the actual data for each 512-byte block within the Chain. */ @@ -227,7 +227,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p if (block == 2) { foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1; if (foldmark == FOLD_MARK_IN_PROGRESS) { - DEBUG(MTD_DEBUG_LEVEL1, + DEBUG(MTD_DEBUG_LEVEL1, "Write Inhibited on EUN %d\n", thisEUN); inplace = 0; } else { @@ -249,7 +249,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p if (!BlockFreeFound[block]) BlockMap[block] = thisEUN; else - printk(KERN_WARNING + printk(KERN_WARNING "SECTOR_USED found after SECTOR_FREE " "in Virtual Unit Chain %d for block %d\n", thisVUC, block); @@ -258,7 +258,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p if (!BlockFreeFound[block]) BlockMap[block] = BLOCK_NIL; else - printk(KERN_WARNING + printk(KERN_WARNING "SECTOR_DELETED found after SECTOR_FREE " "in Virtual Unit Chain %d for block %d\n", thisVUC, block); @@ -277,14 +277,14 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p thisVUC); return BLOCK_NIL; } - + thisEUN = nftl->ReplUnitTable[thisEUN]; } if (inplace) { /* We're being asked to be a fold-in-place. Check that all blocks which actually have data associated - with them (i.e. BlockMap[block] != BLOCK_NIL) are + with them (i.e. BlockMap[block] != BLOCK_NIL) are either already present or SECTOR_FREE in the target block. If not, we're going to have to fold out-of-place anyway. @@ -297,7 +297,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p "block %d was %x lastEUN, " "and is in EUN %d (%s) %d\n", thisVUC, block, BlockLastState[block], - BlockMap[block], + BlockMap[block], BlockMap[block]== targetEUN ? "==" : "!=", targetEUN); inplace = 0; @@ -314,17 +314,17 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p inplace = 0; } } - + if (!inplace) { DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. " "Trying out-of-place\n", thisVUC); /* We need to find a targetEUN to fold into. */ targetEUN = NFTL_findfreeblock(nftl, 1); if (targetEUN == BLOCK_NIL) { - /* Ouch. Now we're screwed. We need to do a + /* Ouch. Now we're screwed. We need to do a fold-in-place of another chain to make room for this one. We need a better way of selecting - which chain to fold, because makefreeblock will + which chain to fold, because makefreeblock will only ask us to fold the same one again. */ printk(KERN_WARNING @@ -338,7 +338,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p chain by selecting the longer one */ oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS); oob.u.c.unused = 0xffffffff; - MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, + MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, 8, &retlen, (char *)&oob.u); } @@ -361,14 +361,14 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p happen in case of media errors or deleted blocks) */ if (BlockMap[block] == BLOCK_NIL) continue; - + ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), - 512, &retlen, movebuf); + 512, &retlen, movebuf); if (ret < 0) { ret = MTD_READ(nftl->mbd.mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), 512, &retlen, - movebuf); - if (ret != -EIO) + movebuf); + if (ret != -EIO) printk("Error went away on retry.\n"); } memset(&oob, 0xff, sizeof(struct nftl_oob)); @@ -376,18 +376,18 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p MTD_WRITEECC(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + (block * 512), 512, &retlen, movebuf, (char *)&oob, &nftl->oobinfo); } - + /* add the header so that it is now a valid chain */ oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; - - MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 8, + + MTD_WRITEOOB(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + 8, 8, &retlen, (char *)&oob.u); /* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */ - /* At this point, we have two different chains for this Virtual Unit, and no way to tell + /* At this point, we have two different chains for this Virtual Unit, and no way to tell them apart. If we crash now, we get confused. However, both contain the same data, so we shouldn't actually lose data in this case. It's just that when we load up on a medium which has duplicate chains, we need to free one of the chains because it's not necessary any more. @@ -395,7 +395,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p thisEUN = nftl->EUNtable[thisVUC]; DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n"); - /* For each block in the old chain (except the targetEUN of course), + /* For each block in the old chain (except the targetEUN of course), free it and make it available for future use */ while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) { unsigned int EUNtmp; @@ -413,7 +413,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p } thisEUN = EUNtmp; } - + /* Make this the new start of chain for thisVUC */ nftl->ReplUnitTable[targetEUN] = BLOCK_NIL; nftl->EUNtable[thisVUC] = targetEUN; @@ -423,7 +423,7 @@ static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned p static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) { - /* This is the part that needs some cleverness applied. + /* This is the part that needs some cleverness applied. For now, I'm doing the minimum applicable to actually get the thing to work. Wear-levelling and other clever stuff needs to be implemented @@ -470,7 +470,7 @@ static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) return NFTL_foldchain (nftl, LongestChain, pendingblock); } -/* NFTL_findwriteunit: Return the unit number into which we can write +/* NFTL_findwriteunit: Return the unit number into which we can write for this block. Make it available if it isn't already */ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) @@ -488,7 +488,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) a free space for the block in question. */ - /* This condition catches the 0x[7f]fff cases, as well as + /* This condition catches the 0x[7f]fff cases, as well as being a sanity check for past-end-of-media access */ lastEUN = BLOCK_NIL; @@ -503,7 +503,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) MTD_READOOB(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, 8, &retlen, (char *)&bci); - + DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n", block , writeEUN, le16_to_cpu(bci.Status)); @@ -518,10 +518,10 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) break; default: // Invalid block. Don't use it any more. Must implement. - break; + break; } - - if (!silly--) { + + if (!silly--) { printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", thisVUC); @@ -532,7 +532,7 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) writeEUN = nftl->ReplUnitTable[writeEUN]; } - /* OK. We didn't find one in the existing chain, or there + /* OK. We didn't find one in the existing chain, or there is no existing chain. */ /* Try to find an already-free block */ @@ -546,12 +546,12 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) /* First remember the start of this chain */ //u16 startEUN = nftl->EUNtable[thisVUC]; - + //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); writeEUN = NFTL_makefreeblock(nftl, 0xffff); if (writeEUN == BLOCK_NIL) { - /* OK, we accept that the above comment is + /* OK, we accept that the above comment is lying - there may have been free blocks last time we called NFTL_findfreeblock(), but they are reserved for when we're @@ -562,21 +562,21 @@ static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) } if (writeEUN == BLOCK_NIL) { /* Ouch. This should never happen - we should - always be able to make some room somehow. - If we get here, we've allocated more storage + always be able to make some room somehow. + If we get here, we've allocated more storage space than actual media, or our makefreeblock routine is missing something. */ printk(KERN_WARNING "Cannot make free space.\n"); return BLOCK_NIL; - } + } //printk("Restarting scan\n"); lastEUN = BLOCK_NIL; continue; } /* We've found a free block. Insert it into the chain. */ - + if (lastEUN != BLOCK_NIL) { thisVUC |= 0x8000; /* It's a replacement block */ } else { @@ -749,7 +749,7 @@ extern char nftlmountrev[]; static int __init init_nftl(void) { - printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.97 $, nftlmount.c %s\n", nftlmountrev); + printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev); return register_mtd_blktrans(&nftl_tr); } diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c index 84afd9029f53..3b104ebb219a 100644 --- a/drivers/mtd/nftlmount.c +++ b/drivers/mtd/nftlmount.c @@ -1,10 +1,10 @@ -/* +/* * NFTL mount code with extensive checks * - * Author: Fabrice Bellard (fabrice.bellard@netgem.com) + * Author: Fabrice Bellard (fabrice.bellard@netgem.com) * Copyright (C) 2000 Netgem S.A. * - * $Id: nftlmount.c,v 1.40 2004/11/22 14:38:29 kalev Exp $ + * $Id: nftlmount.c,v 1.41 2005/11/07 11:14:21 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,7 +31,7 @@ #define SECTORSIZE 512 -char nftlmountrev[]="$Revision: 1.40 $"; +char nftlmountrev[]="$Revision: 1.41 $"; /* find_boot_record: Find the NFTL Media Header and its Spare copy which contains the * various device information of the NFTL partition and Bad Unit Table. Update @@ -47,7 +47,7 @@ static int find_boot_record(struct NFTLrecord *nftl) struct NFTLMediaHeader *mh = &nftl->MediaHdr; unsigned int i; - /* Assume logical EraseSize == physical erasesize for starting the scan. + /* Assume logical EraseSize == physical erasesize for starting the scan. We'll sort it out later if we find a MediaHeader which says otherwise */ /* Actually, we won't. The new DiskOnChip driver has already scanned the MediaHeader and adjusted the virtual erasesize it presents in @@ -83,9 +83,9 @@ static int find_boot_record(struct NFTLrecord *nftl) if (retlen < 6 || memcmp(buf, "ANAND", 6)) { /* ANAND\0 not found. Continue */ #if 0 - printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n", + printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n", block * nftl->EraseSize, nftl->mbd.mtd->index); -#endif +#endif continue; } @@ -103,7 +103,7 @@ static int find_boot_record(struct NFTLrecord *nftl) */ if (le16_to_cpu(h1.EraseMark | h1.EraseMark1) != ERASE_MARK) { printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n", - block * nftl->EraseSize, nftl->mbd.mtd->index, + block * nftl->EraseSize, nftl->mbd.mtd->index, le16_to_cpu(h1.EraseMark), le16_to_cpu(h1.EraseMark1)); continue; } @@ -175,7 +175,7 @@ device is already correct. nftl->nb_boot_blocks = le16_to_cpu(mh->FirstPhysicalEUN); if ((nftl->nb_boot_blocks + 2) >= nftl->nb_blocks) { printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n"); - printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n", + printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n", nftl->nb_boot_blocks, nftl->nb_blocks); return -1; } @@ -187,7 +187,7 @@ device is already correct. nftl->numvunits, nftl->nb_blocks, nftl->nb_boot_blocks); return -1; } - + nftl->mbd.size = nftl->numvunits * (nftl->EraseSize / SECTORSIZE); /* If we're not using the last sectors in the device for some reason, @@ -210,12 +210,12 @@ device is already correct. printk(KERN_NOTICE "NFTL: allocation of ReplUnitTable failed\n"); return -ENOMEM; } - + /* mark the bios blocks (blocks before NFTL MediaHeader) as reserved */ for (i = 0; i < nftl->nb_boot_blocks; i++) nftl->ReplUnitTable[i] = BLOCK_RESERVED; /* mark all remaining blocks as potentially containing data */ - for (; i < nftl->nb_blocks; i++) { + for (; i < nftl->nb_blocks; i++) { nftl->ReplUnitTable[i] = BLOCK_NOTEXPLORED; } @@ -245,12 +245,12 @@ The new DiskOnChip driver already scanned the bad block table. Just query it. if (nftl->mbd.mtd->block_isbad(nftl->mbd.mtd, i * nftl->EraseSize)) nftl->ReplUnitTable[i] = BLOCK_RESERVED; } - + nftl->MediaUnit = block; boot_record_count++; - + } /* foreach (block) */ - + return boot_record_count?0:-1; } @@ -265,7 +265,7 @@ static int memcmpb(void *a, int c, int n) } /* check_free_sector: check if a free sector is actually FREE, i.e. All 0xff in data and oob area */ -static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, +static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int len, int check_oob) { int i; @@ -293,7 +293,7 @@ static int check_free_sectors(struct NFTLrecord *nftl, unsigned int address, int * * Return: 0 when succeed, -1 on error. * - * ToDo: 1. Is it neceressary to check_free_sector after erasing ?? + * ToDo: 1. Is it neceressary to check_free_sector after erasing ?? */ int NFTL_formatblock(struct NFTLrecord *nftl, int block) { @@ -385,7 +385,7 @@ static void check_sectors_in_chain(struct NFTLrecord *nftl, unsigned int first_b /* verify that the sector is really free. If not, mark as ignore */ if (memcmpb(&bci, 0xff, 8) != 0 || - check_free_sectors(nftl, block * nftl->EraseSize + i * SECTORSIZE, + check_free_sectors(nftl, block * nftl->EraseSize + i * SECTORSIZE, SECTORSIZE, 0) != 0) { printk("Incorrect free sector %d in block %d: " "marking it as ignored\n", @@ -486,7 +486,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block) size_t retlen; /* check erase mark. */ - if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, + if (MTD_READOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) return -1; @@ -501,7 +501,7 @@ static int check_and_mark_free_block(struct NFTLrecord *nftl, int block) h1.EraseMark = cpu_to_le16(ERASE_MARK); h1.EraseMark1 = cpu_to_le16(ERASE_MARK); h1.WearInfo = cpu_to_le32(0); - if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, + if (MTD_WRITEOOB(nftl->mbd.mtd, block * nftl->EraseSize + SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) return -1; } else { @@ -582,9 +582,9 @@ int NFTL_mount(struct NFTLrecord *s) for (;;) { /* read the block header. If error, we format the chain */ - if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, 8, + if (MTD_READOOB(s->mbd.mtd, block * s->EraseSize + 8, 8, &retlen, (char *)&h0) < 0 || - MTD_READOOB(s->mbd.mtd, block * s->EraseSize + SECTORSIZE + 8, 8, + MTD_READOOB(s->mbd.mtd, block * s->EraseSize + SECTORSIZE + 8, 8, &retlen, (char *)&h1) < 0) { s->ReplUnitTable[block] = BLOCK_NIL; do_format_chain = 1; @@ -639,7 +639,7 @@ int NFTL_mount(struct NFTLrecord *s) first_logical_block = logical_block; } else { if (logical_block != first_logical_block) { - printk("Block %d: incorrect logical block: %d expected: %d\n", + printk("Block %d: incorrect logical block: %d expected: %d\n", block, logical_block, first_logical_block); /* the chain is incorrect : we must format it, but we need to read it completly */ @@ -668,7 +668,7 @@ int NFTL_mount(struct NFTLrecord *s) s->ReplUnitTable[block] = BLOCK_NIL; break; } else if (rep_block >= s->nb_blocks) { - printk("Block %d: referencing invalid block %d\n", + printk("Block %d: referencing invalid block %d\n", block, rep_block); do_format_chain = 1; s->ReplUnitTable[block] = BLOCK_NIL; @@ -688,7 +688,7 @@ int NFTL_mount(struct NFTLrecord *s) s->ReplUnitTable[block] = rep_block; s->EUNtable[first_logical_block] = BLOCK_NIL; } else { - printk("Block %d: referencing block %d already in another chain\n", + printk("Block %d: referencing block %d already in another chain\n", block, rep_block); /* XXX: should handle correctly fold in progress chains */ do_format_chain = 1; @@ -710,7 +710,7 @@ int NFTL_mount(struct NFTLrecord *s) } else { unsigned int first_block1, chain_to_format, chain_length1; int fold_mark; - + /* valid chain : get foldmark */ fold_mark = get_fold_mark(s, first_block); if (fold_mark == 0) { @@ -729,9 +729,9 @@ int NFTL_mount(struct NFTLrecord *s) if (first_block1 != BLOCK_NIL) { /* XXX: what to do if same length ? */ chain_length1 = calc_chain_length(s, first_block1); - printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n", + printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n", first_block1, chain_length1, first_block, chain_length); - + if (chain_length >= chain_length1) { chain_to_format = first_block1; s->EUNtable[first_logical_block] = first_block; diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 13f9e992bef8..7b7ca5ab5ae4 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -1,5 +1,5 @@ /* - * $Id: redboot.c,v 1.17 2004/11/22 11:33:56 ijc Exp $ + * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $ * * Parse RedBoot-style Flash Image System (FIS) tables and * produce a Linux partition array to match. @@ -39,7 +39,7 @@ static inline int redboot_checksum(struct fis_image_desc *img) return 1; } -static int parse_redboot_partitions(struct mtd_info *master, +static int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin) { diff --git a/drivers/mtd/rfd_ftl.c b/drivers/mtd/rfd_ftl.c index 7b9f359f04b7..041ee59ea77d 100644 --- a/drivers/mtd/rfd_ftl.c +++ b/drivers/mtd/rfd_ftl.c @@ -3,7 +3,7 @@ * * Copyright (C) 2005 Sean Young * - * $Id: rfd_ftl.c,v 1.4 2005/07/31 22:49:14 sean Exp $ + * $Id: rfd_ftl.c,v 1.5 2005/11/07 11:14:21 gleixner Exp $ * * This type of flash translation layer (FTL) is used by the Embedded BIOS * by General Software. It is known as the Resident Flash Disk (RFD), see: @@ -95,7 +95,7 @@ static int build_block_map(struct partition *part, int block_no) { struct block *block = &part->blocks[block_no]; int i; - + block->offset = part->block_size * block_no; if (le16_to_cpu(part->header_cache[0]) != RFD_MAGIC) { @@ -109,12 +109,12 @@ static int build_block_map(struct partition *part, int block_no) for (i=0; idata_sectors_per_block; i++) { u16 entry; - + entry = le16_to_cpu(part->header_cache[HEADER_MAP_OFFSET + i]); if (entry == SECTOR_DELETED) continue; - + if (entry == SECTOR_FREE) { block->free_sectors++; continue; @@ -122,9 +122,9 @@ static int build_block_map(struct partition *part, int block_no) if (entry == SECTOR_ZERO) entry = 0; - + if (entry >= part->sector_count) { - printk(KERN_NOTICE PREFIX + printk(KERN_NOTICE PREFIX "'%s': unit #%d: entry %d corrupt, " "sector %d out of range\n", part->mbd.mtd->name, block_no, i, entry); @@ -132,14 +132,14 @@ static int build_block_map(struct partition *part, int block_no) } if (part->sector_map[entry] != -1) { - printk(KERN_NOTICE PREFIX + printk(KERN_NOTICE PREFIX "'%s': more than one entry for sector %d\n", part->mbd.mtd->name, entry); part->errors = 1; continue; } - part->sector_map[entry] = block->offset + + part->sector_map[entry] = block->offset + (i + part->header_sectors_per_block) * SECTOR_SIZE; block->used_sectors++; @@ -165,14 +165,14 @@ static int scan_header(struct partition *part) return -ENOENT; /* each erase block has three bytes header, followed by the map */ - part->header_sectors_per_block = - ((HEADER_MAP_OFFSET + sectors_per_block) * + part->header_sectors_per_block = + ((HEADER_MAP_OFFSET + sectors_per_block) * sizeof(u16) + SECTOR_SIZE - 1) / SECTOR_SIZE; - part->data_sectors_per_block = sectors_per_block - + part->data_sectors_per_block = sectors_per_block - part->header_sectors_per_block; - part->header_size = (HEADER_MAP_OFFSET + + part->header_size = (HEADER_MAP_OFFSET + part->data_sectors_per_block) * sizeof(u16); part->cylinders = (part->data_sectors_per_block * @@ -188,7 +188,7 @@ static int scan_header(struct partition *part) if (!part->header_cache) goto err; - part->blocks = kcalloc(part->total_blocks, sizeof(struct block), + part->blocks = kcalloc(part->total_blocks, sizeof(struct block), GFP_KERNEL); if (!part->blocks) goto err; @@ -200,18 +200,18 @@ static int scan_header(struct partition *part) goto err; } - for (i=0; isector_count; i++) + for (i=0; isector_count; i++) part->sector_map[i] = -1; for (i=0, blocks_found=0; itotal_blocks; i++) { - rc = part->mbd.mtd->read(part->mbd.mtd, + rc = part->mbd.mtd->read(part->mbd.mtd, i * part->block_size, part->header_size, &retlen, (u_char*)part->header_cache); if (!rc && retlen != part->header_size) rc = -EIO; - if (rc) + if (rc) goto err; if (!build_block_map(part, i)) @@ -226,7 +226,7 @@ static int scan_header(struct partition *part) } if (part->reserved_block == -1) { - printk(KERN_NOTICE PREFIX "'%s': no empty erase unit found\n", + printk(KERN_NOTICE PREFIX "'%s': no empty erase unit found\n", part->mbd.mtd->name); part->errors = 1; @@ -248,7 +248,7 @@ static int rfd_ftl_readsect(struct mtd_blktrans_dev *dev, u_long sector, char *b u_long addr; size_t retlen; int rc; - + if (sector >= part->sector_count) return -EIO; @@ -266,9 +266,9 @@ static int rfd_ftl_readsect(struct mtd_blktrans_dev *dev, u_long sector, char *b } } else memset(buf, 0, SECTOR_SIZE); - + return 0; -} +} static void erase_callback(struct erase_info *erase) { @@ -288,7 +288,7 @@ static void erase_callback(struct erase_info *erase) if (erase->state != MTD_ERASE_DONE) { printk(KERN_WARNING PREFIX "erase failed at 0x%x on '%s', " - "state %d\n", erase->addr, + "state %d\n", erase->addr, part->mbd.mtd->name, erase->state); part->blocks[i].state = BLOCK_FAILED; @@ -307,17 +307,17 @@ static void erase_callback(struct erase_info *erase) part->blocks[i].used_sectors = 0; part->blocks[i].erases++; - rc = part->mbd.mtd->write(part->mbd.mtd, - part->blocks[i].offset, sizeof(magic), &retlen, + rc = part->mbd.mtd->write(part->mbd.mtd, + part->blocks[i].offset, sizeof(magic), &retlen, (u_char*)&magic); - + if (!rc && retlen != sizeof(magic)) rc = -EIO; if (rc) { printk(KERN_NOTICE PREFIX "'%s': unable to write RFD " "header at 0x%lx\n", - part->mbd.mtd->name, + part->mbd.mtd->name, part->blocks[i].offset); part->blocks[i].state = BLOCK_FAILED; } @@ -374,17 +374,17 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old map = kmalloc(part->header_size, GFP_KERNEL); if (!map) goto err2; - - rc = part->mbd.mtd->read(part->mbd.mtd, - part->blocks[block_no].offset, part->header_size, + + rc = part->mbd.mtd->read(part->mbd.mtd, + part->blocks[block_no].offset, part->header_size, &retlen, (u_char*)map); - + if (!rc && retlen != part->header_size) rc = -EIO; if (rc) { printk(KERN_NOTICE PREFIX "error reading '%s' at " - "0x%lx\n", part->mbd.mtd->name, + "0x%lx\n", part->mbd.mtd->name, part->blocks[block_no].offset); goto err; @@ -398,11 +398,11 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old if (entry == SECTOR_FREE || entry == SECTOR_DELETED) continue; - if (entry == SECTOR_ZERO) + if (entry == SECTOR_ZERO) entry = 0; /* already warned about and ignored in build_block_map() */ - if (entry >= part->sector_count) + if (entry >= part->sector_count) continue; addr = part->blocks[block_no].offset + @@ -418,7 +418,7 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old } rc = part->mbd.mtd->read(part->mbd.mtd, addr, SECTOR_SIZE, &retlen, sector_data); - + if (!rc && retlen != SECTOR_SIZE) rc = -EIO; @@ -429,11 +429,11 @@ static int move_block_contents(struct partition *part, int block_no, u_long *old goto err; } - + rc = rfd_ftl_writesect((struct mtd_blktrans_dev*)part, entry, sector_data); - - if (rc) + + if (rc) goto err; } @@ -447,11 +447,11 @@ err3: return rc; } -static int reclaim_block(struct partition *part, u_long *old_sector) +static int reclaim_block(struct partition *part, u_long *old_sector) { int block, best_block, score, old_sector_block; int rc; - + /* we have a race if sync doesn't exist */ if (part->mbd.mtd->sync) part->mbd.mtd->sync(part->mbd.mtd); @@ -474,16 +474,16 @@ static int reclaim_block(struct partition *part, u_long *old_sector) * more removed sectors is more efficient (have to move * less). */ - if (part->blocks[block].free_sectors) + if (part->blocks[block].free_sectors) return 0; this_score = part->blocks[block].used_sectors; - if (block == old_sector_block) + if (block == old_sector_block) this_score--; else { /* no point in moving a full block */ - if (part->blocks[block].used_sectors == + if (part->blocks[block].used_sectors == part->data_sectors_per_block) continue; } @@ -529,7 +529,7 @@ static int find_free_block(const struct partition *part) stop = block; do { - if (part->blocks[block].free_sectors && + if (part->blocks[block].free_sectors && block != part->reserved_block) return block; @@ -563,7 +563,7 @@ static int find_writeable_block(struct partition *part, u_long *old_sector) } } - rc = part->mbd.mtd->read(part->mbd.mtd, part->blocks[block].offset, + rc = part->mbd.mtd->read(part->mbd.mtd, part->blocks[block].offset, part->header_size, &retlen, (u_char*)part->header_cache); if (!rc && retlen != part->header_size) @@ -571,7 +571,7 @@ static int find_writeable_block(struct partition *part, u_long *old_sector) if (rc) { printk(KERN_NOTICE PREFIX "'%s': unable to read header at " - "0x%lx\n", part->mbd.mtd->name, + "0x%lx\n", part->mbd.mtd->name, part->blocks[block].offset); goto err; } @@ -580,7 +580,7 @@ static int find_writeable_block(struct partition *part, u_long *old_sector) err: return rc; -} +} static int mark_sector_deleted(struct partition *part, u_long old_addr) { @@ -590,7 +590,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr) u16 del = const_cpu_to_le16(SECTOR_DELETED); block = old_addr / part->block_size; - offset = (old_addr % part->block_size) / SECTOR_SIZE - + offset = (old_addr % part->block_size) / SECTOR_SIZE - part->header_sectors_per_block; addr = part->blocks[block].offset + @@ -604,7 +604,7 @@ static int mark_sector_deleted(struct partition *part, u_long old_addr) if (rc) { printk(KERN_WARNING PREFIX "error writing '%s' at " "0x%lx\n", part->mbd.mtd->name, addr); - if (rc) + if (rc) goto err; } if (block == part->current_block) @@ -627,7 +627,7 @@ static int find_free_sector(const struct partition *part, const struct block *bl i = stop = part->data_sectors_per_block - block->free_sectors; do { - if (le16_to_cpu(part->header_cache[HEADER_MAP_OFFSET + i]) + if (le16_to_cpu(part->header_cache[HEADER_MAP_OFFSET + i]) == SECTOR_FREE) return i; @@ -653,7 +653,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, !part->blocks[part->current_block].free_sectors) { rc = find_writeable_block(part, old_addr); - if (rc) + if (rc) goto err; } @@ -665,10 +665,10 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, rc = -ENOSPC; goto err; } - - addr = (i + part->header_sectors_per_block) * SECTOR_SIZE + + + addr = (i + part->header_sectors_per_block) * SECTOR_SIZE + block->offset; - rc = part->mbd.mtd->write(part->mbd.mtd, + rc = part->mbd.mtd->write(part->mbd.mtd, addr, SECTOR_SIZE, &retlen, (u_char*)buf); if (!rc && retlen != SECTOR_SIZE) @@ -677,7 +677,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, if (rc) { printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); - if (rc) + if (rc) goto err; } @@ -697,7 +697,7 @@ static int do_writesect(struct mtd_blktrans_dev *dev, u_long sector, char *buf, if (rc) { printk(KERN_WARNING PREFIX "error writing '%s' at 0x%lx\n", part->mbd.mtd->name, addr); - if (rc) + if (rc) goto err; } block->used_sectors++; @@ -738,7 +738,7 @@ static int rfd_ftl_writesect(struct mtd_blktrans_dev *dev, u_long sector, char * break; } - if (i == SECTOR_SIZE) + if (i == SECTOR_SIZE) part->sector_map[sector] = -1; if (old_addr != -1) @@ -801,7 +801,7 @@ static void rfd_ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) if (!add_mtd_blktrans_dev((void*)part)) return; - } + } kfree(part); } @@ -828,7 +828,7 @@ struct mtd_blktrans_ops rfd_ftl_tr = { .major = RFD_FTL_MAJOR, .part_bits = PART_BITS, .readsect = rfd_ftl_readsect, - .writesect = rfd_ftl_writesect, + .writesect = rfd_ftl_writesect, .getgeo = rfd_ftl_getgeo, .add_mtd = rfd_ftl_add_mtd, .remove_dev = rfd_ftl_remove_dev, -- cgit v1.2.3