From f04a9d8adf766c480353c0f2427e641251c9b059 Mon Sep 17 00:00:00 2001 From: Rajkumar Kasirajan Date: Wed, 30 May 2012 16:32:37 +0530 Subject: mfd: ab8500-sysctrl: Update correct turn on status In L9540, turn_on_status register is not updated correctly if the device is rebooted with AC/USB charger connected. Due to this, the device boots android instead of entering into charge only mode. Read the AC/USB status register to detect the charger presence and update the turn on status manually. Signed-off-by: Rajkumar Kasirajan Signed-off-by: Per Forlin Signed-off-by: Lee Jones Reviewed-by: Rupesh KUMAR Reviewed-by: Philippe LANGLAIS Tested-by: Rupesh KUMAR Tested-by: Philippe LANGLAIS Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 39 +++++++++++++++++++++++++++++++++++++++ drivers/mfd/ab8500-sysctrl.c | 2 +- 2 files changed, 40 insertions(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 7c84ced2e01b..50e6f1e29727 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -111,6 +111,13 @@ #define AB8500_TURN_ON_STATUS 0x00 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define VBUS_DET_DBNC100 0x02 +#define VBUS_DET_DBNC1 0x01 + +static DEFINE_SPINLOCK(on_stat_lock); +static u8 turn_on_stat_mask = 0xFF; +static u8 turn_on_stat_set; static bool no_bm; /* No battery management */ module_param(no_bm, bool, S_IRUGO); @@ -1171,6 +1178,15 @@ static ssize_t show_switch_off_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +/* use mask and set to override the register turn_on_stat value */ +void ab8500_override_turn_on_stat(u8 mask, u8 set) +{ + spin_lock(&on_stat_lock); + turn_on_stat_mask = mask; + turn_on_stat_set = set; + spin_unlock(&on_stat_lock); +} + /* * ab8500 has turned on due to (TURN_ON_STATUS): * 0x01 PORnVbat @@ -1194,6 +1210,20 @@ static ssize_t show_turn_on_status(struct device *dev, AB8500_TURN_ON_STATUS, &value); if (ret < 0) return ret; + + /* + * In L9540, turn_on_status register is not updated correctly if + * the device is rebooted with AC/USB charger connected. Due to + * this, the device boots android instead of entering into charge + * only mode. Read the AC/USB status register to detect the charger + * presence and update the turn on status manually. + */ + if (is_ab9540(ab8500)) { + spin_lock(&on_stat_lock); + value = (value & turn_on_stat_mask) | turn_on_stat_set; + spin_unlock(&on_stat_lock); + } + return sprintf(buf, "%#x\n", value); } @@ -1399,6 +1429,15 @@ static int ab8500_probe(struct platform_device *pdev) if (plat && plat->init) plat->init(ab8500); + if (is_ab9540(ab8500)) { + ret = get_register_interruptible(ab8500, AB8500_CHARGER, + AB8500_CH_USBCH_STAT1_REG, &value); + if (ret < 0) + return ret; + if ((value & VBUS_DET_DBNC1) && (value & VBUS_DET_DBNC100)) + ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON, + AB8500_VBUS_DET); + } /* Clear and mask all interrupts */ for (i = 0; i < ab8500->mask_size; i++) { diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 108fd86552f0..7c773797d267 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -21,7 +21,7 @@ void ab8500_power_off(void) { sigset_t old; sigset_t all; - static char *pss[] = {"ab8500_ac", "ab8500_usb"}; + static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; int i; bool charger_present = false; union power_supply_propval val; -- cgit v1.2.3 From 774c50abae2456af492728aee8d282ba5079b744 Mon Sep 17 00:00:00 2001 From: Daniel WILLERUD Date: Thu, 12 Apr 2012 08:15:05 +0200 Subject: mfd: ab8500-gpadc: Implemented suspend/resume suspend/resume methods implemented to prevent suspend while the gpadc driver is busy. Signed-off-by: Daniel WILLERUD Signed-off-by: Lee Jones Reviewed-by: Jonas ABERG Reviewed-by: Ulf HANSSON Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-gpadc.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index b1f3561b023f..9ed3afc31d11 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -605,6 +605,31 @@ static int ab8500_gpadc_runtime_idle(struct device *dev) return 0; } +static int ab8500_gpadc_suspend(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + mutex_lock(&gpadc->ab8500_gpadc_lock); + + pm_runtime_get_sync(dev); + + regulator_disable(gpadc->regu); + return 0; +} + +static int ab8500_gpadc_resume(struct device *dev) +{ + struct ab8500_gpadc *gpadc = dev_get_drvdata(dev); + + regulator_enable(gpadc->regu); + + pm_runtime_mark_last_busy(gpadc->dev); + pm_runtime_put_autosuspend(gpadc->dev); + + mutex_unlock(&gpadc->ab8500_gpadc_lock); + return 0; +} + static int ab8500_gpadc_probe(struct platform_device *pdev) { int ret = 0; @@ -698,6 +723,9 @@ static const struct dev_pm_ops ab8500_gpadc_pm_ops = { SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend, ab8500_gpadc_runtime_resume, ab8500_gpadc_runtime_idle) + SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend, + ab8500_gpadc_resume) + }; static struct platform_driver ab8500_gpadc_driver = { -- cgit v1.2.3 From d89cc5aad109d20d10d228ba52d86e0adca62461 Mon Sep 17 00:00:00 2001 From: Jonas Aaberg Date: Tue, 17 Apr 2012 16:10:46 +0200 Subject: mfd: ab8500-gpadc: Reread on failure Reread the gpadc once upon failure. Signed-off-by: Jonas Aaberg Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-gpadc.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 9ed3afc31d11..7f39479c1afc 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -256,6 +256,11 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) int voltage; ad_value = ab8500_gpadc_read_raw(gpadc, channel); + + /* On failure retry a second time */ + if (ad_value < 0) + ad_value = ab8500_gpadc_read_raw(gpadc, channel); + if (ad_value < 0) { dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel); return ad_value; -- cgit v1.2.3 From 734823462590335cbf5c6a1fa5cae84a881dcb43 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 10:06:55 +0000 Subject: mfd: ab8500-gpadc: Add gpadc hw conversion Add the support of gpacd hw conversion and make the number of sample configurable. Signed-off-by: M'boumba Cedric Madianga Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Tested-by: Michel JAOUEN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 292 +++++++++++++++++++++++++++++--- drivers/mfd/ab8500-gpadc.c | 282 ++++++++++++++++++++++-------- include/linux/mfd/abx500/ab8500-gpadc.h | 30 +++- 3 files changed, 499 insertions(+), 105 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 45fe3c50eb03..59ecd8c680ed 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -101,6 +101,11 @@ static int num_irqs; static struct device_attribute **dev_attr; static char **event_name; +static u8 avg_sample = SAMPLE_16; +static u8 trig_edge = RISING_EDGE; +static u8 conv_type = ADC_SW; +static u8 trig_timer; + /** * struct ab8500_reg_range * @first: the first address of the range @@ -808,9 +813,10 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL); + bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL, + avg_sample, trig_edge, trig_timer, conv_type); bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, - BAT_CTRL, bat_ctrl_raw); + BAT_CTRL, bat_ctrl_raw); return seq_printf(s, "%d,0x%X\n", bat_ctrl_convert, bat_ctrl_raw); @@ -836,9 +842,10 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL); + btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL, + avg_sample, trig_edge, trig_timer, conv_type); btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, - btemp_ball_raw); + btemp_ball_raw); return seq_printf(s, "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); @@ -865,9 +872,10 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V); + main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V, + avg_sample, trig_edge, trig_timer, conv_type); main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, - MAIN_CHARGER_V, main_charger_v_raw); + MAIN_CHARGER_V, main_charger_v_raw); return seq_printf(s, "%d,0x%X\n", main_charger_v_convert, main_charger_v_raw); @@ -895,9 +903,10 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1); + acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1, + avg_sample, trig_edge, trig_timer, conv_type); acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1, - acc_detect1_raw); + acc_detect1_raw); return seq_printf(s, "%d,0x%X\n", acc_detect1_convert, acc_detect1_raw); @@ -925,9 +934,10 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2); + acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2, + avg_sample, trig_edge, trig_timer, conv_type); acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc, - ACC_DETECT2, acc_detect2_raw); + ACC_DETECT2, acc_detect2_raw); return seq_printf(s, "%d,0x%X\n", acc_detect2_convert, acc_detect2_raw); @@ -955,9 +965,10 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1); + aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1, + avg_sample, trig_edge, trig_timer, conv_type); aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1, - aux1_raw); + aux1_raw); return seq_printf(s, "%d,0x%X\n", aux1_convert, aux1_raw); @@ -983,9 +994,10 @@ static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2); + aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2, + avg_sample, trig_edge, trig_timer, conv_type); aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2, - aux2_raw); + aux2_raw); return seq_printf(s, "%d,0x%X\n", aux2_convert, aux2_raw); @@ -1011,9 +1023,10 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V); + main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V, + avg_sample, trig_edge, trig_timer, conv_type); main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, - main_bat_v_raw); + main_bat_v_raw); return seq_printf(s, "%d,0x%X\n", main_bat_v_convert, main_bat_v_raw); @@ -1040,9 +1053,10 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V); + vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V, + avg_sample, trig_edge, trig_timer, conv_type); vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V, - vbus_v_raw); + vbus_v_raw); return seq_printf(s, "%d,0x%X\n", vbus_v_convert, vbus_v_raw); @@ -1068,9 +1082,10 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C); + main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C, + avg_sample, trig_edge, trig_timer, conv_type); main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, - MAIN_CHARGER_C, main_charger_c_raw); + MAIN_CHARGER_C, main_charger_c_raw); return seq_printf(s, "%d,0x%X\n", main_charger_c_convert, main_charger_c_raw); @@ -1098,9 +1113,10 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C); + usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C, + avg_sample, trig_edge, trig_timer, conv_type); usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc, - USB_CHARGER_C, usb_charger_c_raw); + USB_CHARGER_C, usb_charger_c_raw); return seq_printf(s, "%d,0x%X\n", usb_charger_c_convert, usb_charger_c_raw); @@ -1128,9 +1144,10 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V); + bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V, + avg_sample, trig_edge, trig_timer, conv_type); bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, - BK_BAT_V, bk_bat_v_raw); + BK_BAT_V, bk_bat_v_raw); return seq_printf(s, "%d,0x%X\n", bk_bat_v_convert, bk_bat_v_raw); @@ -1156,9 +1173,10 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p) struct ab8500_gpadc *gpadc; gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); - die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP); + die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP, + avg_sample, trig_edge, trig_timer, conv_type); die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP, - die_temp_raw); + die_temp_raw); return seq_printf(s, "%d,0x%X\n", die_temp_convert, die_temp_raw); @@ -1177,6 +1195,208 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = { .owner = THIS_MODULE, }; +static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", avg_sample); +} + +static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_avg_sample_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_avg_sample; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_avg_sample); + if (err) + return -EINVAL; + if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4) + || (user_avg_sample == SAMPLE_8) + || (user_avg_sample == SAMPLE_16)) { + avg_sample = (u8) user_avg_sample; + } else { + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); + return -EINVAL; + } + return buf_size; +} + +static const struct file_operations ab8500_gpadc_avg_sample_fops = { + .open = ab8500_gpadc_avg_sample_open, + .read = seq_read, + .write = ab8500_gpadc_avg_sample_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", trig_edge); +} + +static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_trig_edge_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_trig_edge; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_trig_edge); + if (err) + return -EINVAL; + if ((user_trig_edge == RISING_EDGE) + || (user_trig_edge == FALLING_EDGE)) { + trig_edge = (u8) user_trig_edge; + } else { + dev_err(dev, "Wrong input:\n" + "Enter 0. Rising edge\n" + "Enter 1. Falling edge\n"); + return -EINVAL; + } + return buf_size; +} + +static const struct file_operations ab8500_gpadc_trig_edge_fops = { + .open = ab8500_gpadc_trig_edge_open, + .read = seq_read, + .write = ab8500_gpadc_trig_edge_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", trig_timer); +} + +static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_trig_timer_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_trig_timer; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_trig_timer); + if (err) + return -EINVAL; + if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) { + trig_timer = (u8) user_trig_timer; + } else { + dev_err(dev, "debugfs error input: " + "should be beetween 0 to 255\n"); + return -EINVAL; + } + return buf_size; +} + +static const struct file_operations ab8500_gpadc_trig_timer_fops = { + .open = ab8500_gpadc_trig_timer_open, + .read = seq_read, + .write = ab8500_gpadc_trig_timer_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p) +{ + return seq_printf(s, "%d\n", conv_type); +} + +static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_conv_type_print, + inode->i_private); +} + +static ssize_t ab8500_gpadc_conv_type_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct device *dev = ((struct seq_file *)(file->private_data))->private; + char buf[32]; + int buf_size; + unsigned long user_conv_type; + int err; + + /* Get userspace string and assure termination */ + buf_size = min(count, (sizeof(buf) - 1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + err = strict_strtoul(buf, 0, &user_conv_type); + if (err) + return -EINVAL; + if ((user_conv_type == ADC_SW) + || (user_conv_type == ADC_HW)) { + conv_type = (u8) user_conv_type; + } else { + dev_err(dev, "Wrong input:\n" + "Enter 0. ADC SW conversion\n" + "Enter 1. ADC HW conversion\n"); + return -EINVAL; + } + return buf_size; +} + +static const struct file_operations ab8500_gpadc_conv_type_fops = { + .open = ab8500_gpadc_conv_type_open, + .read = seq_read, + .write = ab8500_gpadc_conv_type_write, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + /* * return length of an ASCII numerical value, 0 is string is not a * numerical value. @@ -1722,6 +1942,26 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; + file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops); + if (!file) + goto err; + + file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops); + if (!file) + goto err; + + file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops); + if (!file) + goto err; + + file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops); + if (!file) + goto err; + return 0; err: diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 7f39479c1afc..8673bf66f7d7 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -55,13 +55,18 @@ #define EN_VTVOUT 0x02 #define EN_GPADC 0x01 #define DIS_GPADC 0x00 -#define SW_AVG_16 0x60 +#define AVG_1 0x00 +#define AVG_4 0x20 +#define AVG_8 0x40 +#define AVG_16 0x60 #define ADC_SW_CONV 0x04 #define EN_ICHAR 0x80 #define BTEMP_PULL_UP 0x08 #define EN_BUF 0x40 #define DIS_ZERO 0x00 #define GPADC_BUSY 0x01 +#define EN_FALLING 0x10 +#define EN_TRIG_EDGE 0x02 /* GPADC constants from AB8500 spec, UM0836 */ #define ADC_RESOLUTION 1024 @@ -116,7 +121,10 @@ struct adc_cal_data { * the completion of gpadc conversion * @ab8500_gpadc_lock: structure of type mutex * @regu: pointer to the struct regulator - * @irq: interrupt number that is used by gpadc + * @irq_sw: interrupt number that is used by gpadc for Sw + * conversion + * @irq_hw: interrupt number that is used by gpadc for Hw + * conversion * @cal_data array of ADC calibration data structs */ struct ab8500_gpadc { @@ -126,7 +134,8 @@ struct ab8500_gpadc { struct completion ab8500_gpadc_complete; struct mutex ab8500_gpadc_lock; struct regulator *regu; - int irq; + int irq_sw; + int irq_hw; struct adc_cal_data cal_data[NBR_CAL_INPUTS]; }; @@ -244,30 +253,35 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage); /** - * ab8500_gpadc_convert() - gpadc conversion + * ab8500_gpadc_sw_hw_convert() - gpadc conversion * @channel: analog channel to be converted to digital data + * @avg_sample: number of ADC sample to average + * @trig_egde: selected ADC trig edge + * @trig_timer: selected ADC trigger delay timer + * @conv_type: selected conversion type (HW or SW conversion) * * This function converts the selected analog i/p to digital * data. */ -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) +int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) { int ad_value; int voltage; - ad_value = ab8500_gpadc_read_raw(gpadc, channel); - - /* On failure retry a second time */ + ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, + trig_edge, trig_timer, conv_type); +/* On failure retry a second time */ if (ad_value < 0) - ad_value = ab8500_gpadc_read_raw(gpadc, channel); - - if (ad_value < 0) { - dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel); + ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample, + trig_edge, trig_timer, conv_type); +if (ad_value < 0) { + dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", + channel); return ad_value; } voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value); - if (voltage < 0) dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" " %d AD: 0x%x\n", channel, ad_value); @@ -279,11 +293,16 @@ EXPORT_SYMBOL(ab8500_gpadc_convert); /** * ab8500_gpadc_read_raw() - gpadc read * @channel: analog channel to be read + * @avg_sample: number of ADC sample to average + * @trig_edge: selected trig edge + * @trig_timer: selected ADC trigger delay timer + * @conv_type: selected conversion type (HW or SW conversion) * - * This function obtains the raw ADC value, this then needs - * to be converted by calling ab8500_gpadc_ad_to_voltage() + * This function obtains the raw ADC value for an hardware conversion, + * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage() */ -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) { int ret; int looplimit = 0; @@ -293,7 +312,6 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) return -ENODEV; mutex_lock(&gpadc->ab8500_gpadc_lock); - /* Enable VTVout LDO this is required for GPADC */ pm_runtime_get_sync(gpadc->dev); @@ -321,9 +339,29 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) goto out; } - /* Select the channel source and set average samples to 16 */ - ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16)); + /* Select the channel source and set average samples */ + switch (avg_sample) { + case SAMPLE_1: + val = channel | AVG_1; + break; + case SAMPLE_4: + val = channel | AVG_4; + break; + case SAMPLE_8: + val = channel | AVG_8; + break; + default: + val = channel | AVG_16; + break; + + } + + if (conv_type == ADC_HW) + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val); + else + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val); if (ret < 0) { dev_err(gpadc->dev, "gpadc_conversion: set avg samples failed\n"); @@ -335,22 +373,43 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) * charging current sense if it needed, ABB 3.0 needs some special * treatment too. */ + if ((conv_type == ADC_HW) && (trig_edge)) { + ret = abx500_mask_and_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_FALLING, EN_FALLING); + + } switch (channel) { case MAIN_CHARGER_C: case USB_CHARGER_C: - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_ICHAR, - EN_BUF | EN_ICHAR); - break; - case BTEMP_BALL: - if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { - /* Turn on btemp pull-up on ABB 3.0 */ + if (conv_type == ADC_HW) ret = abx500_mask_and_set_register_interruptible( gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | BTEMP_PULL_UP, - EN_BUF | BTEMP_PULL_UP); + EN_BUF | EN_ICHAR | EN_TRIG_EDGE, + EN_BUF | EN_ICHAR | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_ICHAR, + EN_BUF | EN_ICHAR); + break; + case BTEMP_BALL: + if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { + if (conv_type == ADC_HW) + /* Turn on btemp pull-up on ABB 3.0 */ + ret = abx500_mask_and_set_register_interruptible + (gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE, + EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible + (gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | BTEMP_PULL_UP, + EN_BUF | BTEMP_PULL_UP); /* * Delay might be needed for ABB8500 cut 3.0, if not, remove @@ -361,8 +420,17 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) } /* Intentional fallthrough */ default: - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF); + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_TRIG_EDGE, + EN_BUF | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, + AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF); break; } if (ret < 0) { @@ -371,36 +439,83 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) goto out; } - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: start s/w conversion failed\n"); - goto out; + /* Set trigger delay timer */ + if (conv_type == ADC_HW) { + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: trig timer failed\n"); + goto out; + } + } + + /* Start SW conversion */ + if (conv_type == ADC_SW) { + ret = abx500_mask_and_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + ADC_SW_CONV, ADC_SW_CONV); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: start s/w conv failed\n"); + goto out; + } } + /* wait for completion of conversion */ - if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - msecs_to_jiffies(CONVERSION_TIME))) { - dev_err(gpadc->dev, - "timeout: didn't receive GPADC conversion interrupt\n"); - ret = -EINVAL; - goto out; + if (conv_type == ADC_HW) { + if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, + 2*HZ)) { + dev_err(gpadc->dev, + "timeout didn't receive" + " hw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; + } + } else { + if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, + msecs_to_jiffies(CONVERSION_TIME))) { + dev_err(gpadc->dev, + "timeout didn't receive" + " sw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; + } } /* Read the converted RAW data */ - ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_MANDATAL_REG, &low_data); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n"); - goto out; - } + if (conv_type == ADC_HW) { + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_AUTODATAL_REG, &low_data); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read hw low data failed\n"); + goto out; + } - ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC, - AB8500_GPADC_MANDATAH_REG, &high_data); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read high data failed\n"); - goto out; + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_AUTODATAH_REG, &high_data); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read hw high data failed\n"); + goto out; + } + } else { + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_MANDATAL_REG, &low_data); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw low data failed\n"); + goto out; + } + + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_MANDATAH_REG, &high_data); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw high data failed\n"); + goto out; + } } /* Disable GPADC */ @@ -411,6 +526,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel) goto out; } + /* Disable VTVout LDO this is required for GPADC */ pm_runtime_mark_last_busy(gpadc->dev); pm_runtime_put_autosuspend(gpadc->dev); @@ -427,9 +543,7 @@ out: */ (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, DIS_GPADC); - pm_runtime_put(gpadc->dev); - mutex_unlock(&gpadc->ab8500_gpadc_lock); dev_err(gpadc->dev, "gpadc_conversion: Failed to AD convert channel %d\n", channel); @@ -438,16 +552,16 @@ out: EXPORT_SYMBOL(ab8500_gpadc_read_raw); /** - * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion + * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion * @irq: irq number * @data: pointer to the data passed during request irq * - * This is a interrupt service routine for s/w gpadc conversion completion. + * This is a interrupt service routine for gpadc conversion completion. * Notifies the gpadc completion is completed and the converted raw value * can be read from the registers. * Returns IRQ status(IRQ_HANDLED) */ -static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc) +static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc) { struct ab8500_gpadc *gpadc = _gpadc; @@ -646,11 +760,19 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) return -ENOMEM; } - gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END"); - if (gpadc->irq < 0) { - dev_err(&pdev->dev, "failed to get platform irq-%d\n", - gpadc->irq); - ret = gpadc->irq; + gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END"); + if (gpadc->irq_sw < 0) { + dev_err(gpadc->dev, "failed to get platform irq-%d\n", + gpadc->irq_sw); + ret = gpadc->irq_sw; + goto fail; + } + + gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END"); + if (gpadc->irq_hw < 0) { + dev_err(gpadc->dev, "failed to get platform irq-%d\n", + gpadc->irq_hw); + ret = gpadc->irq_hw; goto fail; } @@ -661,14 +783,21 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) /* Initialize completion used to notify completion of conversion */ init_completion(&gpadc->ab8500_gpadc_complete); - /* Register interrupt - SwAdcComplete */ - ret = request_threaded_irq(gpadc->irq, NULL, - ab8500_bm_gpswadcconvend_handler, - IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED, - "ab8500-gpadc", gpadc); + /* Register interrupts */ + ret = request_threaded_irq(gpadc->irq_sw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw", gpadc); + if (ret < 0) { + dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n", + gpadc->irq_sw); + goto fail; + } + ret = request_threaded_irq(gpadc->irq_hw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw", gpadc); if (ret < 0) { dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n", - gpadc->irq); + gpadc->irq_hw); goto fail; } @@ -694,7 +823,8 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) dev_dbg(gpadc->dev, "probe success\n"); return 0; fail_irq: - free_irq(gpadc->irq, gpadc); + free_irq(gpadc->irq_sw, gpadc); + free_irq(gpadc->irq_hw, gpadc); fail: kfree(gpadc); gpadc = NULL; @@ -708,7 +838,8 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) /* remove this gpadc entry from the list */ list_del(&gpadc->node); /* remove interrupt - completion of Sw ADC conversion */ - free_irq(gpadc->irq, gpadc); + free_irq(gpadc->irq_sw, gpadc); + free_irq(gpadc->irq_hw, gpadc); pm_runtime_get_sync(gpadc->dev); pm_runtime_disable(gpadc->dev); @@ -757,6 +888,7 @@ subsys_initcall_sync(ab8500_gpadc_init); module_exit(ab8500_gpadc_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson"); +MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," + "M'boumba Cedric Madianga"); MODULE_ALIAS("platform:ab8500_gpadc"); MODULE_DESCRIPTION("AB8500 GPADC driver"); diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h index 252966769d93..7694e7ab1880 100644 --- a/include/linux/mfd/abx500/ab8500-gpadc.h +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -4,12 +4,14 @@ * * Author: Arun R Murthy * Author: Daniel Willerud + * Author: M'boumba Cedric Madianga */ #ifndef _AB8500_GPADC_H #define _AB8500_GPADC_H -/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2) */ +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2 + * and ADCHwSel[4:0] in GPADCCtrl3 ) */ #define BAT_CTRL 0x01 #define BTEMP_BALL 0x02 #define MAIN_CHARGER_V 0x03 @@ -24,12 +26,32 @@ #define BK_BAT_V 0x0C #define DIE_TEMP 0x0D +#define SAMPLE_1 1 +#define SAMPLE_4 4 +#define SAMPLE_8 8 +#define SAMPLE_16 16 +#define RISING_EDGE 0 +#define FALLING_EDGE 1 + +/* Arbitrary ADC conversion type constants */ +#define ADC_SW 0 +#define ADC_HW 1 + + struct ab8500_gpadc; struct ab8500_gpadc *ab8500_gpadc_get(char *name); -int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel); -int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel); +int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) +{ + return ab8500_gpadc_sw_hw_convert(gpadc, channel, + SAMPLE_16, 0, 0, ADC_SW); +} + +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, - u8 channel, int ad_value); + u8 channel, int ad_value); #endif /* _AB8500_GPADC_H */ -- cgit v1.2.3 From a29264b68a93556a09005b9f18cbd3f61f6fd355 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 25 Feb 2013 14:34:26 +0000 Subject: mfd: ab8500-core: APE Interrupts are not cleared There are missing register descriptions from the AB8505 user manual and these need to be masked so that the APEINT line can toggle. This patch also affects the behaviour of AB9540. Signed-off-by: Marcus Cooper Signed-off-by: Lee Jones Reviewed-by: Maxime COQUELIN Reviewed-by: Alexandre TORGUE Reviewed-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 50e6f1e29727..baaf2ed8095b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -95,6 +95,7 @@ #define AB8500_IT_MASK22_REG 0x55 #define AB8500_IT_MASK23_REG 0x56 #define AB8500_IT_MASK24_REG 0x57 +#define AB8500_IT_MASK25_REG 0x58 /* * latch hierarchy registers @@ -137,9 +138,9 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, }; -/* AB9540 support */ +/* AB9540 / AB8505 support */ static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { - 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, + 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23 }; static const char ab8500_version_str[][7] = { -- cgit v1.2.3 From cfc0849c66099dc62ed6d879d8128977bd087aa7 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Mon, 28 May 2012 15:53:58 +0200 Subject: mfd: ab8500-debug: Print banks in hex This patch changes bank prints to use hex value. Signed-off-by: Mattias Wallin Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Daniel WILLERUD Tested-by: Jonas ABERG Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 59ecd8c680ed..75366b55f16c 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -525,19 +525,19 @@ static int ab8500_registers_print(struct device *dev, u32 bank, } if (s) { - err = seq_printf(s, " [%u/0x%02X]: 0x%02X\n", + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", bank, reg, value); if (err < 0) { dev_err(dev, - "seq_printf overflow bank=%d reg=%d\n", + "seq_printf overflow bank=0x%02X reg=0x%02X\n", bank, reg); /* Error is not returned here since * the output is wanted in any case */ return 0; } } else { - printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank, - reg, value); + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", + bank, reg, value); } } } @@ -551,7 +551,7 @@ static int ab8500_print_bank_registers(struct seq_file *s, void *p) seq_printf(s, AB8500_NAME_STRING " register values:\n"); - seq_printf(s, " bank %u:\n", bank); + seq_printf(s, " bank 0x%02X:\n", bank); ab8500_registers_print(dev, bank, s); return 0; @@ -579,9 +579,9 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p) seq_printf(s, AB8500_NAME_STRING " register values:\n"); for (i = 1; i < AB8500_NUM_BANKS; i++) { - err = seq_printf(s, " bank %u:\n", i); + err = seq_printf(s, " bank 0x%02X:\n", i); if (err < 0) - dev_err(dev, "seq_printf overflow, bank=%d\n", i); + dev_err(dev, "seq_printf overflow, bank=0x%02X\n", i); ab8500_registers_print(dev, i, s); } @@ -596,7 +596,7 @@ void ab8500_dump_all_banks(struct device *dev) printk(KERN_INFO"ab8500 register values:\n"); for (i = 1; i < AB8500_NUM_BANKS; i++) { - printk(KERN_INFO" bank %u:\n", i); + printk(KERN_INFO" bank 0x%02X:\n", i); ab8500_registers_print(dev, i, NULL); } } @@ -630,7 +630,7 @@ static const struct file_operations ab8500_all_banks_fops = { static int ab8500_bank_print(struct seq_file *s, void *p) { - return seq_printf(s, "%d\n", debug_bank); + return seq_printf(s, "0x%02X\n", debug_bank); } static int ab8500_bank_open(struct inode *inode, struct file *file) -- cgit v1.2.3 From 5ff9090f3de360578a2a4f53812fcfce761bfaaa Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 12 Feb 2013 14:35:28 +0000 Subject: mfd: ab8500-debug: Function to save all ABB registers to mem Dump function that stores all readable ABB registers to a memory areas where they can be accessed from dump file. Signed-off-by: Jonas Aaberg Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 50 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 75366b55f16c..7febf171e755 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -601,6 +601,56 @@ void ab8500_dump_all_banks(struct device *dev) } } +/* Space for 500 registers. */ +#define DUMP_MAX_REGS 700 +struct ab8500_register_dump +{ + u8 bank; + u8 reg; + u8 value; + int ret; +} ab8500_complete_register_dump[DUMP_MAX_REGS]; + +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); + +/* This shall only be called upon kernel panic! */ +void ab8500_dump_all_banks_to_mem(void) +{ + int i, r = 0; + u8 bank; + + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); + + for (bank = 1; bank < AB8500_NUM_BANKS; bank++) { + for (i = 0; i < debug_ranges[bank].num_ranges; i++) { + u8 reg; + + for (reg = debug_ranges[bank].range[i].first; + reg <= debug_ranges[bank].range[i].last; + reg++) { + u8 value; + int err; + + err = prcmu_abb_read(bank, reg, &value, 1); + + ab8500_complete_register_dump[r].ret = err; + ab8500_complete_register_dump[r].bank = bank; + ab8500_complete_register_dump[r].reg = reg; + ab8500_complete_register_dump[r].value = value; + + r++; + + if (r >= DUMP_MAX_REGS) { + pr_err("%s: too many register to dump!\n", + __func__); + return; + } + } + } + } +} + static int ab8500_all_banks_open(struct inode *inode, struct file *file) { struct seq_file *s; -- cgit v1.2.3 From c0eda9aef1c0ef7bb2812b739ddf400405568bef Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 12 Feb 2013 15:04:09 +0000 Subject: mfd: ab8500-core: Add ADC support for ab8540 Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 74 ++++++++++++++++++++++++++++++++++++---------- drivers/mfd/ab8500-gpadc.c | 67 +++++++++++++++++++++++------------------ 2 files changed, 98 insertions(+), 43 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index baaf2ed8095b..cdf6c1e59bc3 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -658,6 +658,15 @@ static struct resource ab8500_gpadc_resources[] = { }, }; +static struct resource ab8540_gpadc_resources[] = { + { + .name = "SW_CONV_END", + .start = AB8500_INT_GP_SW_ADC_CONV_END, + .end = AB8500_INT_GP_SW_ADC_CONV_END, + .flags = IORESOURCE_IRQ, + }, +}; + static struct resource ab8500_rtc_resources[] = { { .name = "60S", @@ -1013,12 +1022,6 @@ static struct mfd_cell abx500_common_devs[] = { .name = "abx500-clk", .of_compatible = "stericsson,abx500-clk", }, - { - .name = "ab8500-gpadc", - .of_compatible = "stericsson,ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), - .resources = ab8500_gpadc_resources, - }, { .name = "ab8500-rtc", .of_compatible = "stericsson,ab8500-rtc", @@ -1118,6 +1121,12 @@ static struct mfd_cell ab8500_devs[] = { .name = "ab8500-codec", .of_compatible = "stericsson,ab8500-codec", }, + { + .name = "ab8500-gpadc", + .of_compatible = "stericsson,ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), + .resources = ab8500_gpadc_resources, + }, }; static struct mfd_cell ab9540_devs[] = { @@ -1133,10 +1142,44 @@ static struct mfd_cell ab9540_devs[] = { { .name = "ab9540-codec", }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), + .resources = ab8500_gpadc_resources, + }, + { + .name = "ab-iddet", + .num_resources = ARRAY_SIZE(ab8505_iddet_resources), + .resources = ab8505_iddet_resources, + }, }; -/* Device list common to ab9540 and ab8505 */ -static struct mfd_cell ab9540_ab8505_devs[] = { +/* Device list for ab8505 */ +static struct mfd_cell ab8505_devs[] = { + { + .name = "ab-iddet", + .num_resources = ARRAY_SIZE(ab8505_iddet_resources), + .resources = ab8505_iddet_resources, + }, +}; + +static struct mfd_cell ab8540_devs[] = { + { + .name = "ab8500-gpio", + }, + { + .name = "ab8540-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, + { + .name = "ab8540-codec", + }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8540_gpadc_resources), + .resources = ab8540_gpadc_resources, + }, { .name = "ab-iddet", .num_resources = ARRAY_SIZE(ab8505_iddet_resources), @@ -1495,6 +1538,14 @@ static int ab8500_probe(struct platform_device *pdev) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, ab8500->irq_base, ab8500->domain); + else if (is_ab8540(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs, + ARRAY_SIZE(ab8540_devs), NULL, + ab8500->irq_base, ab8500->domain); + else if (is_ab8505(ab8500)) + ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs, + ARRAY_SIZE(ab8505_devs), NULL, + ab8500->irq_base, ab8500->domain); else ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, ARRAY_SIZE(ab8500_devs), NULL, @@ -1502,13 +1553,6 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; - if (is_ab9540(ab8500) || is_ab8505(ab8500)) - ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs, - ARRAY_SIZE(ab9540_ab8505_devs), NULL, - ab8500->irq_base, ab8500->domain); - if (ret) - return ret; - if (!no_bm) { /* Add battery management devices */ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index 8673bf66f7d7..fc8da4496e84 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -311,6 +311,12 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, if (!gpadc) return -ENODEV; + /* check if convertion is supported */ + if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW)) + return -ENOTSUPP; + if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW)) + return -ENOTSUPP; + mutex_lock(&gpadc->ab8500_gpadc_lock); /* Enable VTVout LDO this is required for GPADC */ pm_runtime_get_sync(gpadc->dev); @@ -761,20 +767,12 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) } gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END"); - if (gpadc->irq_sw < 0) { - dev_err(gpadc->dev, "failed to get platform irq-%d\n", - gpadc->irq_sw); - ret = gpadc->irq_sw; - goto fail; - } + if (gpadc->irq_sw < 0) + dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n"); gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END"); - if (gpadc->irq_hw < 0) { - dev_err(gpadc->dev, "failed to get platform irq-%d\n", - gpadc->irq_hw); - ret = gpadc->irq_hw; - goto fail; - } + if (gpadc->irq_hw < 0) + dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n"); gpadc->dev = &pdev->dev; gpadc->parent = dev_get_drvdata(pdev->dev.parent); @@ -784,21 +782,30 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) init_completion(&gpadc->ab8500_gpadc_complete); /* Register interrupts */ - ret = request_threaded_irq(gpadc->irq_sw, NULL, - ab8500_bm_gpadcconvend_handler, - IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw", gpadc); - if (ret < 0) { - dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n", - gpadc->irq_sw); - goto fail; + if (gpadc->irq_sw >= 0) { + ret = request_threaded_irq(gpadc->irq_sw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw", + gpadc); + if (ret < 0) { + dev_err(gpadc->dev, + "Failed to register interrupt irq: %d\n", + gpadc->irq_sw); + goto fail; + } } - ret = request_threaded_irq(gpadc->irq_hw, NULL, - ab8500_bm_gpadcconvend_handler, - IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw", gpadc); - if (ret < 0) { - dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n", - gpadc->irq_hw); - goto fail; + + if (gpadc->irq_hw >= 0) { + ret = request_threaded_irq(gpadc->irq_hw, NULL, + ab8500_bm_gpadcconvend_handler, + IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw", + gpadc); + if (ret < 0) { + dev_err(gpadc->dev, + "Failed to register interrupt irq: %d\n", + gpadc->irq_hw); + goto fail_irq; + } } /* VTVout LDO used to power up ab8500-GPADC */ @@ -821,7 +828,9 @@ static int ab8500_gpadc_probe(struct platform_device *pdev) ab8500_gpadc_read_calibration_data(gpadc); list_add_tail(&gpadc->node, &ab8500_gpadc_list); dev_dbg(gpadc->dev, "probe success\n"); + return 0; + fail_irq: free_irq(gpadc->irq_sw, gpadc); free_irq(gpadc->irq_hw, gpadc); @@ -838,8 +847,10 @@ static int ab8500_gpadc_remove(struct platform_device *pdev) /* remove this gpadc entry from the list */ list_del(&gpadc->node); /* remove interrupt - completion of Sw ADC conversion */ - free_irq(gpadc->irq_sw, gpadc); - free_irq(gpadc->irq_hw, gpadc); + if (gpadc->irq_sw >= 0) + free_irq(gpadc->irq_sw, gpadc); + if (gpadc->irq_hw >= 0) + free_irq(gpadc->irq_hw, gpadc); pm_runtime_get_sync(gpadc->dev); pm_runtime_disable(gpadc->dev); -- cgit v1.2.3 From 4b106fb9895c7edba2acd41c152e8f6edf724651 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 25 Feb 2013 14:42:00 +0000 Subject: mfd: ab8500-core: Rework MFD sub-device initialisation structures Here we're separating Battery Management devices into their own structure, removing the common device structure & redistribute them amongst the individual platform structs and completing the population of them. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 243 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 182 insertions(+), 61 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index cdf6c1e59bc3..23db4fcea496 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -658,7 +658,7 @@ static struct resource ab8500_gpadc_resources[] = { }, }; -static struct resource ab8540_gpadc_resources[] = { +static struct resource ab8505_gpadc_resources[] = { { .name = "SW_CONV_END", .start = AB8500_INT_GP_SW_ADC_CONV_END, @@ -1001,7 +1001,42 @@ static struct resource ab8500_temp_resources[] = { }, }; -static struct mfd_cell abx500_common_devs[] = { +static struct mfd_cell ab8500_bm_devs[] = { + { + .name = "ab8500-charger", + .of_compatible = "stericsson,ab8500-charger", + .num_resources = ARRAY_SIZE(ab8500_charger_resources), + .resources = ab8500_charger_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-btemp", + .of_compatible = "stericsson,ab8500-btemp", + .num_resources = ARRAY_SIZE(ab8500_btemp_resources), + .resources = ab8500_btemp_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-fg", + .of_compatible = "stericsson,ab8500-fg", + .num_resources = ARRAY_SIZE(ab8500_fg_resources), + .resources = ab8500_fg_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, + { + .name = "ab8500-chargalg", + .of_compatible = "stericsson,ab8500-chargalg", + .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), + .resources = ab8500_chargalg_resources, + .platform_data = &ab8500_bm_data, + .pdata_size = sizeof(ab8500_bm_data), + }, +}; + +static struct mfd_cell ab8500_devs[] = { #ifdef CONFIG_DEBUG_FS { .name = "ab8500-debug", @@ -1022,6 +1057,11 @@ static struct mfd_cell abx500_common_devs[] = { .name = "abx500-clk", .of_compatible = "stericsson,abx500-clk", }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), + .resources = ab8500_gpadc_resources, + }, { .name = "ab8500-rtc", .of_compatible = "stericsson,ab8500-rtc", @@ -1035,6 +1075,7 @@ static struct mfd_cell abx500_common_devs[] = { .resources = ab8500_av_acc_detect_resources, }, { + .name = "ab8500-poweron-key", .of_compatible = "stericsson,ab8500-poweron-key", .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), @@ -1063,63 +1104,39 @@ static struct mfd_cell abx500_common_devs[] = { .name = "ab8500-denc", .of_compatible = "stericsson,ab8500-denc", }, + { + .name = "ab8500-gpio", + .of_compatible = "stericsson,ab8500-gpio", + }, { .name = "abx500-temp", .of_compatible = "stericsson,abx500-temp", .num_resources = ARRAY_SIZE(ab8500_temp_resources), .resources = ab8500_temp_resources, }, -}; - -static struct mfd_cell ab8500_bm_devs[] = { - { - .name = "ab8500-charger", - .of_compatible = "stericsson,ab8500-charger", - .num_resources = ARRAY_SIZE(ab8500_charger_resources), - .resources = ab8500_charger_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), - }, { - .name = "ab8500-btemp", - .of_compatible = "stericsson,ab8500-btemp", - .num_resources = ARRAY_SIZE(ab8500_btemp_resources), - .resources = ab8500_btemp_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), - }, - { - .name = "ab8500-fg", - .of_compatible = "stericsson,ab8500-fg", - .num_resources = ARRAY_SIZE(ab8500_fg_resources), - .resources = ab8500_fg_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, }, { - .name = "ab8500-chargalg", - .of_compatible = "stericsson,ab8500-chargalg", - .num_resources = ARRAY_SIZE(ab8500_chargalg_resources), - .resources = ab8500_chargalg_resources, - .platform_data = &ab8500_bm_data, - .pdata_size = sizeof(ab8500_bm_data), + .name = "ab8500-codec", }, }; -static struct mfd_cell ab8500_devs[] = { +static struct mfd_cell ab9540_devs[] = { +#ifdef CONFIG_DEBUG_FS { - .name = "pinctrl-ab8500", - .of_compatible = "stericsson,ab8500-gpio", + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, }, +#endif { - .name = "ab8500-usb", - .of_compatible = "stericsson,ab8500-usb", - .num_resources = ARRAY_SIZE(ab8500_usb_resources), - .resources = ab8500_usb_resources, + .name = "ab8500-sysctrl", }, { - .name = "ab8500-codec", - .of_compatible = "stericsson,ab8500-codec", + .name = "ab8500-regulator", }, { .name = "ab8500-gpadc", @@ -1127,9 +1144,33 @@ static struct mfd_cell ab8500_devs[] = { .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), .resources = ab8500_gpadc_resources, }, -}; - -static struct mfd_cell ab9540_devs[] = { + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "abx500-temp", + .num_resources = ARRAY_SIZE(ab8500_temp_resources), + .resources = ab8500_temp_resources, + }, { .name = "pinctrl-ab9540", .of_compatible = "stericsson,ab9540-gpio", @@ -1142,11 +1183,6 @@ static struct mfd_cell ab9540_devs[] = { { .name = "ab9540-codec", }, - { - .name = "ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8500_gpadc_resources), - .resources = ab8500_gpadc_resources, - }, { .name = "ab-iddet", .num_resources = ARRAY_SIZE(ab8505_iddet_resources), @@ -1156,6 +1192,57 @@ static struct mfd_cell ab9540_devs[] = { /* Device list for ab8505 */ static struct mfd_cell ab8505_devs[] = { +#ifdef CONFIG_DEBUG_FS + { + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, + }, +#endif + { + .name = "ab8500-sysctrl", + }, + { + .name = "ab8500-regulator", + }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), + .resources = ab8505_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "ab8500-gpio", + }, + { + .name = "ab8500-usb", + .num_resources = ARRAY_SIZE(ab8500_usb_resources), + .resources = ab8500_usb_resources, + }, + { + .name = "ab8500-codec", + }, { .name = "ab-iddet", .num_resources = ARRAY_SIZE(ab8505_iddet_resources), @@ -1164,6 +1251,51 @@ static struct mfd_cell ab8505_devs[] = { }; static struct mfd_cell ab8540_devs[] = { +#ifdef CONFIG_DEBUG_FS + { + .name = "ab8500-debug", + .num_resources = ARRAY_SIZE(ab8500_debug_resources), + .resources = ab8500_debug_resources, + }, +#endif + { + .name = "ab8500-sysctrl", + }, + { + .name = "ab8500-regulator", + }, + { + .name = "ab8500-gpadc", + .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), + .resources = ab8505_gpadc_resources, + }, + { + .name = "ab8500-rtc", + .num_resources = ARRAY_SIZE(ab8500_rtc_resources), + .resources = ab8500_rtc_resources, + }, + { + .name = "ab8500-acc-det", + .num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources), + .resources = ab8500_av_acc_detect_resources, + }, + { + .name = "ab8500-poweron-key", + .num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources), + .resources = ab8500_poweronkey_db_resources, + }, + { + .name = "ab8500-pwm", + .id = 1, + }, + { + .name = "ab8500-leds", + }, + { + .name = "abx500-temp", + .num_resources = ARRAY_SIZE(ab8500_temp_resources), + .resources = ab8500_temp_resources, + }, { .name = "ab8500-gpio", }, @@ -1175,11 +1307,6 @@ static struct mfd_cell ab8540_devs[] = { { .name = "ab8540-codec", }, - { - .name = "ab8500-gpadc", - .num_resources = ARRAY_SIZE(ab8540_gpadc_resources), - .resources = ab8540_gpadc_resources, - }, { .name = "ab-iddet", .num_resources = ARRAY_SIZE(ab8505_iddet_resources), @@ -1528,12 +1655,6 @@ static int ab8500_probe(struct platform_device *pdev) return ret; } - ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, - ARRAY_SIZE(abx500_common_devs), NULL, - ab8500->irq_base, ab8500->domain); - if (ret) - return ret; - if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, -- cgit v1.2.3 From 3e1a498f2728476535571d270081a17fdfceaf26 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 25 Feb 2013 14:57:35 +0000 Subject: mfd: ab8500-core: Add Interrupt support for ab8540 ITSource/ITLatch 7, 8, 9 and 10 don't exist on AB8540. This patch replaces them with '-1' in the interrupt list, and handles the '-1' in the code accordingly. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 50 +++++++++++++++++++++++++++++++++------ include/linux/mfd/abx500/ab8500.h | 1 + 2 files changed, 44 insertions(+), 7 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 23db4fcea496..0ba08a26cf73 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -103,8 +103,10 @@ #define AB8500_IT_LATCHHIER1_REG 0x60 #define AB8500_IT_LATCHHIER2_REG 0x61 #define AB8500_IT_LATCHHIER3_REG 0x62 +#define AB8540_IT_LATCHHIER4_REG 0x63 #define AB8500_IT_LATCHHIER_NUM 3 +#define AB8540_IT_LATCHHIER_NUM 4 #define AB8500_REV_REG 0x80 #define AB8500_IC_NAME_REG 0x82 @@ -143,6 +145,12 @@ static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = { 0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23 }; +/* AB8540 support */ +static const int ab8540_irq_regoffset[AB8540_NUM_IRQ_REGS] = { + 0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23, + 25, 26, 27, 28, 29, 30, 31, +}; + static const char ab8500_version_str[][7] = { [AB8500_VERSION_AB8500] = "AB8500", [AB8500_VERSION_AB8505] = "AB8505", @@ -360,6 +368,9 @@ static void ab8500_irq_sync_unlock(struct irq_data *data) is_ab8500_1p1_or_earlier(ab8500)) continue; + if (ab8500->irq_reg_offset[i] < 0) + continue; + ab8500->oldmask[i] = new; reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i]; @@ -431,6 +442,18 @@ static struct irq_chip ab8500_irq_chip = { .irq_set_type = ab8500_irq_set_type, }; +static void update_latch_offset(u8 *offset, int i) +{ + /* Fix inconsistent ITFromLatch25 bit mapping... */ + if (unlikely(*offset == 17)) + *offset = 24; + /* Fix inconsistent ab8540 bit mapping... */ + if (unlikely(*offset == 16)) + *offset = 25; + if ((i==3) && (*offset >= 24)) + *offset += 2; +} + static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500, int latch_offset, u8 latch_val) { @@ -482,9 +505,7 @@ static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500, latch_bit = __ffs(hier_val); latch_offset = (hier_offset << 3) + latch_bit; - /* Fix inconsistent ITFromLatch25 bit mapping... */ - if (unlikely(latch_offset == 17)) - latch_offset = 24; + update_latch_offset(&latch_offset, hier_offset); status = get_register_interruptible(ab8500, AB8500_INTERRUPT, @@ -512,7 +533,7 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev) dev_vdbg(ab8500->dev, "interrupt\n"); /* Hierarchical interrupt version */ - for (i = 0; i < AB8500_IT_LATCHHIER_NUM; i++) { + for (i = 0; i < (ab8500->it_latchhier_num); i++) { int status; u8 hier_val; @@ -565,6 +586,9 @@ static irqreturn_t ab8500_irq(int irq, void *dev) if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) continue; + if (regoffset < 0) + continue; + status = get_register_interruptible(ab8500, AB8500_INTERRUPT, AB8500_IT_LATCH1_REG + regoffset, &value); if (status < 0 || value == 0) @@ -615,7 +639,9 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np) { int num_irqs; - if (is_ab9540(ab8500)) + if (is_ab8540(ab8500)) + num_irqs = AB8540_NR_IRQS; + else if (is_ab9540(ab8500)) num_irqs = AB9540_NR_IRQS; else if (is_ab8505(ab8500)) num_irqs = AB8505_NR_IRQS; @@ -1552,13 +1578,20 @@ static int ab8500_probe(struct platform_device *pdev) ab8500->chip_id >> 4, ab8500->chip_id & 0x0F); - /* Configure AB8500 or AB9540 IRQ */ - if (is_ab9540(ab8500) || is_ab8505(ab8500)) { + /* Configure AB8540 */ + if (is_ab8540(ab8500)) { + ab8500->mask_size = AB8540_NUM_IRQ_REGS; + ab8500->irq_reg_offset = ab8540_irq_regoffset; + ab8500->it_latchhier_num = AB8540_IT_LATCHHIER_NUM; + }/* Configure AB8500 or AB9540 IRQ */ + else if (is_ab9540(ab8500) || is_ab8505(ab8500)) { ab8500->mask_size = AB9540_NUM_IRQ_REGS; ab8500->irq_reg_offset = ab9540_irq_regoffset; + ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM; } else { ab8500->mask_size = AB8500_NUM_IRQ_REGS; ab8500->irq_reg_offset = ab8500_irq_regoffset; + ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM; } ab8500->mask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL); if (!ab8500->mask) @@ -1620,6 +1653,9 @@ static int ab8500_probe(struct platform_device *pdev) is_ab8500_1p1_or_earlier(ab8500)) continue; + if (ab8500->irq_reg_offset[i] < 0) + continue; + get_register_interruptible(ab8500, AB8500_INTERRUPT, AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i], &value); diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index fdd8be64feeb..b5780fd40fe4 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -362,6 +362,7 @@ struct ab8500 { u8 *oldmask; int mask_size; const int *irq_reg_offset; + int it_latchhier_num; }; struct regulator_reg_init; -- cgit v1.2.3 From 222460cb4b2fe1c1e84f3302a8d8dbc4a94f6837 Mon Sep 17 00:00:00 2001 From: Jonas Aaberg Date: Mon, 18 Jun 2012 10:35:28 +0200 Subject: mfd: ab8500-debug: Better error handling on crash Stop trying to read i2c registers if one fail. Signed-off-by: Jonas Aaberg Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 7febf171e755..1e76a2f35066 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -608,7 +608,6 @@ struct ab8500_register_dump u8 bank; u8 reg; u8 value; - int ret; } ab8500_complete_register_dump[DUMP_MAX_REGS]; extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); @@ -618,6 +617,7 @@ void ab8500_dump_all_banks_to_mem(void) { int i, r = 0; u8 bank; + int err = 0; pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " "for crash analyze.\n"); @@ -630,11 +630,12 @@ void ab8500_dump_all_banks_to_mem(void) reg <= debug_ranges[bank].range[i].last; reg++) { u8 value; - int err; err = prcmu_abb_read(bank, reg, &value, 1); - ab8500_complete_register_dump[r].ret = err; + if (err < 0) + goto out; + ab8500_complete_register_dump[r].bank = bank; ab8500_complete_register_dump[r].reg = reg; ab8500_complete_register_dump[r].value = value; @@ -644,11 +645,17 @@ void ab8500_dump_all_banks_to_mem(void) if (r >= DUMP_MAX_REGS) { pr_err("%s: too many register to dump!\n", __func__); - return; + err = -EINVAL; + goto out; } } } } +out: + if (err >= 0) + pr_info("Saved all ABB registers.\n"); + else + pr_info("Failed to save all ABB registers.\n"); } static int ab8500_all_banks_open(struct inode *inode, struct file *file) -- cgit v1.2.3 From 2cf64e264828aa0be841751d41fcd7f13a98d778 Mon Sep 17 00:00:00 2001 From: Jonas Aaberg Date: Thu, 31 May 2012 07:57:07 +0200 Subject: mfd: ab8500-debug: Add wake-up info Add information regarding what ab interrupt that caused a wake-up from suspend in /ab8500/interrupts. Also print the name of the interrupts, not just the numbers. Signed-off-by: Jonas Aaberg Signed-off-by: Lee Jones Reviewed-by: Per FORLIN Tested-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 1e76a2f35066..55d0ff4f5b23 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -80,6 +80,7 @@ #include #include #include +#include #include #include @@ -803,22 +804,46 @@ static ssize_t ab8500_val_write(struct file *file, * Interrupt status */ static u32 num_interrupts[AB8500_MAX_NR_IRQS]; +static u32 num_wake_interrupts[AB8500_MAX_NR_IRQS]; static int num_interrupt_lines; +bool __attribute__((weak)) suspend_test_wake_cause_interrupt_is_mine(u32 my_int) +{ + return false; +} + void ab8500_debug_register_interrupt(int line) { - if (line < num_interrupt_lines) + if (line < num_interrupt_lines) { num_interrupts[line]++; + if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500)) + num_wake_interrupts[line]++; + } } static int ab8500_interrupts_print(struct seq_file *s, void *p) { int line; - seq_printf(s, "irq: number of\n"); + seq_printf(s, "name: number: number of: wake:\n"); + + for (line = 0; line < num_interrupt_lines; line++) { + struct irq_desc *desc = irq_to_desc(line + irq_first); + struct irqaction *action = desc->action; - for (line = 0; line < num_interrupt_lines; line++) - seq_printf(s, "%3i: %6i\n", line, num_interrupts[line]); + seq_printf(s, "%3i: %6i %4i", line, + num_interrupts[line], + num_wake_interrupts[line]); + + if (desc && desc->name) + seq_printf(s, "-%-8s", desc->name); + if (action) { + seq_printf(s, " %s", action->name); + while ((action = action->next) != NULL) + seq_printf(s, ", %s", action->name); + } + seq_putc(s, '\n'); + } return 0; } @@ -1870,7 +1895,7 @@ static int ab8500_debug_probe(struct platform_device *plf) dev_err(&plf->dev, "Last irq not found, err %d\n", irq_last); ret = irq_last; - goto out_freeevent_name; + goto out_freeevent_name; } ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL); -- cgit v1.2.3 From 2377e52f7ca8ebe6ba9ad0e6173915538ee4808b Mon Sep 17 00:00:00 2001 From: Marcus Danielsson Date: Mon, 18 Jun 2012 15:00:40 +0200 Subject: mfd: ab8500-sysctrl: Error check clean up Add error checks to see if sysctrl was probed as it should. If the sysctrl_dev is not set the return value is -EINVAL. Signed-off-by: Marcus Danielsson Signed-off-by: Lee Jones Reviewed-by: Mattias WALLIN Tested-by: Per FORLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 7c773797d267..6ac63a05893c 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -28,6 +28,11 @@ void ab8500_power_off(void) struct power_supply *psy; int ret; + if (sysctrl_dev == NULL) { + pr_err("%s: sysctrl not initialized\n", __func__); + return; + } + /* * If we have a charger connected and we're powering off, * reboot into charge-only mode. @@ -85,7 +90,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value) u8 bank; if (sysctrl_dev == NULL) - return -EAGAIN; + return -EINVAL; bank = (reg >> 8); if (!valid_bank(bank)) @@ -101,7 +106,7 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) u8 bank; if (sysctrl_dev == NULL) - return -EAGAIN; + return -EINVAL; bank = (reg >> 8); if (!valid_bank(bank)) @@ -116,31 +121,32 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) { struct ab8500_platform_data *plat; struct ab8500_sysctrl_platform_data *pdata; + int ret, i, j; - sysctrl_dev = &pdev->dev; plat = dev_get_platdata(pdev->dev.parent); + + if (!(plat && plat->sysctrl)) + return -EINVAL; + if (plat->pm_power_off) pm_power_off = ab8500_power_off; pdata = plat->sysctrl; - if (pdata) { - int ret, i, j; - for (i = AB8500_SYSCLKREQ1RFCLKBUF; - i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) { - j = i - AB8500_SYSCLKREQ1RFCLKBUF; - ret = ab8500_sysctrl_write(i, 0xff, - pdata->initial_req_buf_config[j]); - dev_dbg(&pdev->dev, + for (i = AB8500_SYSCLKREQ1RFCLKBUF; + i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) { + j = i - AB8500_SYSCLKREQ1RFCLKBUF; + ret = ab8500_sysctrl_write(i, 0xff, + pdata->initial_req_buf_config[j]); + dev_dbg(&pdev->dev, "Setting SysClkReq%dRfClkBuf 0x%X\n", j + 1, pdata->initial_req_buf_config[j]); - if (ret < 0) { - dev_err(&pdev->dev, - "unable to set sysClkReq%dRfClkBuf: " - "%d\n", j + 1, ret); - } + if (ret < 0) { + dev_err(&pdev->dev, + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); } } -- cgit v1.2.3 From e436ddff5748c459853bb3fb97550a9b8b647b8d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 10:09:41 +0000 Subject: mfd: ab8500-debugfs: Add tests for ab8540 based platform initialisations Signed-off-by: Alexandre Torgue Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Mattias WALLIN Tested-by: Maxime COQUELIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 9 ++++++--- drivers/mfd/ab8500-debugfs.c | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 0ba08a26cf73..0fc18e91310c 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1346,6 +1346,7 @@ static ssize_t show_chip_id(struct device *dev, struct ab8500 *ab8500; ab8500 = dev_get_drvdata(dev); + return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL); } @@ -1676,7 +1677,7 @@ static int ab8500_probe(struct platform_device *pdev) /* Activate this feature only in ab9540 */ /* till tests are done on ab8500 1p2 or later*/ - if (is_ab9540(ab8500)) { + if (is_ab9540(ab8500) || is_ab8540(ab8500)) ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, ab8500_hierarchical_irq, IRQF_ONESHOT | IRQF_NO_SUSPEND, @@ -1719,7 +1720,8 @@ static int ab8500_probe(struct platform_device *pdev) dev_err(ab8500->dev, "error adding bm devices\n"); } - if (is_ab9540(ab8500)) + if (((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500)) ret = sysfs_create_group(&ab8500->dev->kobj, &ab9540_attr_group); else @@ -1735,7 +1737,8 @@ static int ab8500_remove(struct platform_device *pdev) { struct ab8500 *ab8500 = platform_get_drvdata(pdev); - if (is_ab9540(ab8500)) + if (((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500)) sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group); else sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 55d0ff4f5b23..969e43db8485 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1943,6 +1943,8 @@ static int ab8500_debug_probe(struct platform_device *plf) num_interrupt_lines = AB8505_NR_IRQS; else if (is_ab9540(ab8500)) num_interrupt_lines = AB9540_NR_IRQS; + else if (is_ab8540(ab8500)) + num_interrupt_lines = AB8540_NR_IRQS; file = debugfs_create_file("interrupts", (S_IRUGO), ab8500_dir, &plf->dev, &ab8500_interrupts_fops); -- cgit v1.2.3 From 9581ae39de8833a7affaef24caadef2830603fef Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 6 Jul 2012 16:11:50 +0200 Subject: mfd: ab8500-debug: Add support for ab8505 and ab9540 Make it possible to dump all registers in ab8505 and ab9540. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 383 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 372 insertions(+), 11 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 969e43db8485..074eea9e4bfd 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -156,7 +156,9 @@ static struct hwreg_cfg hwreg_cfg = { #define AB8500_REV_REG 0x80 -static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { +static struct ab8500_prcmu_ranges *debug_ranges; + +struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = { [0x0] = { .num_ranges = 0, .range = NULL, @@ -360,7 +362,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, { .first = 0xf5, - .last = 0xf6, + .last = 0xf6, }, }, }, @@ -485,6 +487,365 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = { }, }; +struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = { + [0x0] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_SYS_CTRL1_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x52, + .last = 0x52, + }, + { + .first = 0x54, + .last = 0x57, + }, + { + .first = 0x80, + .last = 0x83, + }, + }, + }, + [AB8500_SYS_CTRL2_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0D, + }, + { + .first = 0x0F, + .last = 0x17, + }, + { + .first = 0x20, + .last = 0x20, + }, + { + .first = 0x30, + .last = 0x30, + }, + { + .first = 0x32, + .last = 0x3A, + }, + }, + }, + [AB8500_REGU_CTRL1] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x03, + .last = 0x11, + }, + { + .first = 0x80, + .last = 0x86, + }, + }, + }, + [AB8500_REGU_CTRL2] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x08, + .last = 0x15, + }, + { + .first = 0x17, + .last = 0x19, + }, + { + .first = 0x1B, + .last = 0x1D, + }, + { + .first = 0x1F, + .last = 0x30, + }, + { + .first = 0x40, + .last = 0x48, + }, + /* 0x80-0x8B is SIM registers and should + * not be accessed from here */ + }, + }, + [AB8500_USB] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x87, + .last = 0x8A, + }, + { + .first = 0x91, + .last = 0x94, + }, + }, + }, + [AB8500_TVOUT] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_DBI] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_ECI_AV_ACC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_RESERVED] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_GPADC] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x08, + }, + }, + }, + [AB8500_CHARGER] = { + .num_ranges = 9, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x02, + .last = 0x03, + }, + { + .first = 0x05, + .last = 0x05, + }, + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x50, + .last = 0x57, + }, + { + .first = 0x60, + .last = 0x60, + }, + { + .first = 0xA0, + .last = 0xA7, + }, + { + .first = 0xAF, + .last = 0xB2, + }, + { + .first = 0xC0, + .last = 0xC2, + }, + { + .first = 0xF5, + .last = 0xF5, + }, + }, + }, + [AB8500_GAS_GAUGE] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x07, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_AUDIO] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x83, + }, + }, + }, + [AB8500_INTERRUPT] = { + .num_ranges = 11, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x06, + .last = 0x07, + }, + { + .first = 0x09, + .last = 0x09, + }, + { + .first = 0x0B, + .last = 0x0C, + }, + { + .first = 0x12, + .last = 0x15, + }, + { + .first = 0x18, + .last = 0x18, + }, + /* Latch registers should not be read here */ + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x46, + .last = 0x49, + }, + { + .first = 0x4B, + .last = 0x4D, + }, + { + .first = 0x52, + .last = 0x55, + }, + { + .first = 0x58, + .last = 0x58, + }, + /* LatchHier registers should not be read here */ + }, + }, + [AB8500_RTC] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x14, + }, + { + .first = 0x16, + .last = 0x17, + }, + }, + }, + [AB8500_MISC] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x16, + }, + { + .first = 0x20, + .last = 0x26, + }, + { + .first = 0x30, + .last = 0x36, + }, + { + .first = 0x40, + .last = 0x46, + }, + { + .first = 0x50, + .last = 0x50, + }, + { + .first = 0x60, + .last = 0x6B, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_DEVELOPMENT] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x05, + .last = 0x05, + }, + }, + }, + [AB8500_DEBUG] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x05, + .last = 0x07, + }, + }, + }, + [AB8500_PROD_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_STE_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_OTP_EMUL] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x01, + .last = 0x15, + }, + }, + }, +}; + static irqreturn_t ab8500_debug_handler(int irq, void *data) { char buf[16]; @@ -529,9 +890,6 @@ static int ab8500_registers_print(struct device *dev, u32 bank, err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", bank, reg, value); if (err < 0) { - dev_err(dev, - "seq_printf overflow bank=0x%02X reg=0x%02X\n", - bank, reg); /* Error is not returned here since * the output is wanted in any case */ return 0; @@ -581,8 +939,6 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p) for (i = 1; i < AB8500_NUM_BANKS; i++) { err = seq_printf(s, " bank 0x%02X:\n", i); - if (err < 0) - dev_err(dev, "seq_printf overflow, bank=0x%02X\n", i); ab8500_registers_print(dev, i, s); } @@ -1937,14 +2293,19 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; - if (is_ab8500(ab8500)) + if (is_ab8500(ab8500)) { + debug_ranges = ab8500_debug_ranges; num_interrupt_lines = AB8500_NR_IRQS; - else if (is_ab8505(ab8500)) + } else if (is_ab8505(ab8500)) { + debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB8505_NR_IRQS; - else if (is_ab9540(ab8500)) + } else if (is_ab9540(ab8500)) { + debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB9540_NR_IRQS; - else if (is_ab8540(ab8500)) + } else if (is_ab8540(ab8500)) { + debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB8540_NR_IRQS; + } file = debugfs_create_file("interrupts", (S_IRUGO), ab8500_dir, &plf->dev, &ab8500_interrupts_fops); -- cgit v1.2.3 From 75932094601b404fc9ef28f7b6c0aa83dd619af0 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 12 Feb 2013 15:11:19 +0000 Subject: mfd: ab8500-sysctrl: Add new reset function Add a new reset function which uses the AB WD with 0 timeout. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 63 +++++++++++++++++++++++++++++++ include/linux/mfd/abx500/ab8500-sysctrl.h | 6 +++ 2 files changed, 69 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index 6ac63a05893c..f43c42b9f32c 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -15,6 +15,12 @@ #include #include +/* RtcCtrl bits */ +#define AB8500_ALARM_MIN_LOW 0x08 +#define AB8500_ALARM_MIN_MID 0x09 +#define RTC_CTRL 0x0B +#define RTC_ALARM_ENABLE 0x4 + static struct device *sysctrl_dev; void ab8500_power_off(void) @@ -79,6 +85,63 @@ shutdown: } } +/* + * Use the AB WD to reset the platform. It will perform a hard + * reset instead of a soft reset. Write the reset reason to + * the AB before reset, which can be read upon restart. + */ +void ab8500_restart(char mode, const char *cmd) +{ + struct ab8500_platform_data *plat; + struct ab8500_sysctrl_platform_data *pdata; + u16 reason = 0; + u8 val; + + if (sysctrl_dev == NULL) { + pr_err("%s: sysctrl not initialized\n", __func__); + return; + } + + plat = dev_get_platdata(sysctrl_dev->parent); + pdata = plat->sysctrl; + if (pdata->reboot_reason_code) + reason = pdata->reboot_reason_code(cmd); + else + pr_warn("[%s] No reboot reason set. Default reason %d\n", + __func__, reason); + + /* + * Disable RTC alarm, just a precaution so that no alarm + * is running when WD reset is executed. + */ + abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC, + RTC_CTRL , &val); + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + RTC_CTRL , (val & ~RTC_ALARM_ENABLE)); + + /* + * Android is not using the RTC alarm registers during reboot + * so we borrow them for writing the reason of reset + */ + + /* reason[8 LSB] */ + val = reason & 0xFF; + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + AB8500_ALARM_MIN_LOW , val); + + /* reason[8 MSB] */ + val = (reason>>8) & 0xFF; + abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC, + AB8500_ALARM_MIN_MID , val); + + /* Setting WD timeout to 0 */ + ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0); + + /* Setting the parameters to AB8500 WD*/ + ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD | + AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD)); +} + static inline bool valid_bank(u8 bank) { return ((bank == AB8500_SYS_CTRL1_BLOCK) || diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h index ebf12e793db9..990bc93f46e1 100644 --- a/include/linux/mfd/abx500/ab8500-sysctrl.h +++ b/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -12,6 +12,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value); int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); +void ab8500_restart(char mode, const char *cmd); #else @@ -40,6 +41,7 @@ static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) /* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ struct ab8500_sysctrl_platform_data { u8 initial_req_buf_config[8]; + u16 (*reboot_reason_code)(const char *cmd); }; /* Registers */ @@ -299,4 +301,8 @@ struct ab8500_sysctrl_platform_data { #define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF #define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 +#define AB8500_ENABLE_WD 0x1 +#define AB8500_KICK_WD 0x2 +#define AB8500_WD_RESTART_ON_EXPIRE 0x10 + #endif /* __AB8500_SYSCTRL_H */ -- cgit v1.2.3 From e4bffe8d8ad9856143b6e941a17870aee37413d7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 11 Feb 2013 10:38:00 +0000 Subject: mfd: ab8500-gpadc: Add support for the AB8540 This patch enables the GPADC to work on AB8540 based platforms. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-gpadc.c | 316 ++++++++++++++++++++++++++++---- include/linux/mfd/abx500/ab8500-gpadc.h | 43 +++-- 2 files changed, 305 insertions(+), 54 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index fc8da4496e84..c985b90577f6 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -37,6 +37,13 @@ #define AB8500_GPADC_AUTODATAL_REG 0x07 #define AB8500_GPADC_AUTODATAH_REG 0x08 #define AB8500_GPADC_MUX_CTRL_REG 0x09 +#define AB8540_GPADC_MANDATA2L_REG 0x09 +#define AB8540_GPADC_MANDATA2H_REG 0x0A +#define AB8540_GPADC_APEAAX_REG 0x10 +#define AB8540_GPADC_APEAAT_REG 0x11 +#define AB8540_GPADC_APEAAM_REG 0x12 +#define AB8540_GPADC_APEAAH_REG 0x13 +#define AB8540_GPADC_APEAAL_REG 0x14 /* * OTP register offsets @@ -49,6 +56,10 @@ #define AB8500_GPADC_CAL_5 0x13 #define AB8500_GPADC_CAL_6 0x14 #define AB8500_GPADC_CAL_7 0x15 +/* New calibration for 8540 */ +#define AB8540_GPADC_OTP4_REG_7 0x38 +#define AB8540_GPADC_OTP4_REG_6 0x39 +#define AB8540_GPADC_OTP4_REG_5 0x3A /* gpadc constants */ #define EN_VINTCORE12 0x04 @@ -67,6 +78,7 @@ #define GPADC_BUSY 0x01 #define EN_FALLING 0x10 #define EN_TRIG_EDGE 0x02 +#define EN_VBIAS_XTAL_TEMP 0x02 /* GPADC constants from AB8500 spec, UM0836 */ #define ADC_RESOLUTION 1024 @@ -85,8 +97,21 @@ #define ADC_CH_BKBAT_MIN 0 #define ADC_CH_BKBAT_MAX 3200 +/* GPADC constants from AB8540 spec */ +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX 6000 +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX_V 60 +#define IBAT_VDROP_L (-56) /* mV */ +#define IBAT_VDROP_H 56 + /* This is used to not lose precision when dividing to get gain and offset */ -#define CALIB_SCALE 1000 +#define CALIB_SCALE 1000 +/* + * Number of bits shift used to not lose precision + * when dividing to get ibat gain. + */ +#define CALIB_SHIFT_IBAT 20 /* Time in ms before disabling regulator */ #define GPADC_AUDOSUSPEND_DELAY 1 @@ -97,6 +122,7 @@ enum cal_channels { ADC_INPUT_VMAIN = 0, ADC_INPUT_BTEMP, ADC_INPUT_VBAT, + ADC_INPUT_IBAT, NBR_CAL_INPUTS, }; @@ -107,8 +133,8 @@ enum cal_channels { * @offset: Offset of the ADC channel */ struct adc_cal_data { - u64 gain; - u64 offset; + s64 gain; + s64 offset; }; /** @@ -180,6 +206,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE; break; + case XTAL_TEMP: case BAT_CTRL: case BTEMP_BALL: case ACC_DETECT1: @@ -198,6 +225,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, break; case MAIN_BAT_V: + case VBAT_TRUE_MEAS: /* For some reason we don't have calibrated data */ if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) { res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX - @@ -241,6 +269,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, ADC_RESOLUTION; break; + case IBAT_VIRTUAL_CHANNEL: + /* For some reason we don't have calibrated data */ + if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) { + res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX - + ADC_CH_IBAT_MIN) * ad_value / + ADC_RESOLUTION; + break; + } + /* Here we can use the calibrated data */ + res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain + + gpadc->cal_data[ADC_INPUT_IBAT].offset) + >> CALIB_SHIFT_IBAT; + break; + default: dev_err(gpadc->dev, "unknown channel, not possible to convert\n"); @@ -303,10 +345,20 @@ EXPORT_SYMBOL(ab8500_gpadc_convert); */ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) +{ + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, + avg_sample, trig_edge, trig_timer, conv_type, NULL); + return raw_data; +} + +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat) { int ret; int looplimit = 0; - u8 val, low_data, high_data; + u8 val, low_data, high_data, low_data2, high_data2; if (!gpadc) return -ENODEV; @@ -359,7 +411,6 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, default: val = channel | AVG_16; break; - } if (conv_type == ADC_HW) @@ -383,8 +434,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, ret = abx500_mask_and_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_FALLING, EN_FALLING); - } + switch (channel) { case MAIN_CHARGER_C: case USB_CHARGER_C: @@ -401,6 +452,55 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, EN_BUF | EN_ICHAR, EN_BUF | EN_ICHAR); break; + + case XTAL_TEMP: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_TRIG_EDGE, + EN_BUF | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF , + EN_BUF); + break; + + case VBAT_TRUE_MEAS: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_TRIG_EDGE, + EN_BUF | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF , + EN_BUF); + break; + + case BAT_CTRL_AND_IBAT: + case VBAT_MEAS_AND_IBAT: + case VBAT_TRUE_MEAS_AND_IBAT: + case BAT_TEMP_AND_IBAT: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_TRIG_EDGE, + EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF, + 0); + break; + case BTEMP_BALL: if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { if (conv_type == ADC_HW) @@ -471,21 +571,19 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, /* wait for completion of conversion */ if (conv_type == ADC_HW) { if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - 2*HZ)) { - dev_err(gpadc->dev, - "timeout didn't receive" - " hw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; + 2 * HZ)) { + dev_err(gpadc->dev, + "timeout didn't receive hw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; } } else { if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - msecs_to_jiffies(CONVERSION_TIME))) { - dev_err(gpadc->dev, - "timeout didn't receive" - " sw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; + msecs_to_jiffies(CONVERSION_TIME))) { + dev_err(gpadc->dev, + "timeout didn't receive sw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; } } @@ -523,6 +621,46 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, goto out; } } + /* Check if double convertion is required */ + if ((channel == BAT_CTRL_AND_IBAT) || + (channel == VBAT_MEAS_AND_IBAT) || + (channel == VBAT_TRUE_MEAS_AND_IBAT) || + (channel == BAT_TEMP_AND_IBAT)) { + + if (conv_type == ADC_HW) { + /* not supported */ + ret = -ENOTSUPP; + dev_err(gpadc->dev, + "gpadc_conversion: only SW double conversion supported\n"); + goto out; + } else { + /* Read the converted RAW data 2 */ + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG, + &low_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw low data 2 failed\n"); + goto out; + } + + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG, + &high_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw high data 2 failed\n"); + goto out; + } + if (ibat != NULL) { + *ibat = (high_data2 << 8) | low_data2; + } else { + dev_warn(gpadc->dev, + "gpadc_conversion: ibat not stored\n"); + } + + } + } /* Disable GPADC */ ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, @@ -586,15 +724,27 @@ static int otp_cal_regs[] = { AB8500_GPADC_CAL_7, }; +static int otp4_cal_regs[] = { + AB8540_GPADC_OTP4_REG_7, + AB8540_GPADC_OTP4_REG_6, + AB8540_GPADC_OTP4_REG_5, +}; + static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) { int i; int ret[ARRAY_SIZE(otp_cal_regs)]; u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)]; - + int ret_otp4[ARRAY_SIZE(otp4_cal_regs)]; + u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)]; int vmain_high, vmain_low; int btemp_high, btemp_low; int vbat_high, vbat_low; + int ibat_high, ibat_low; + s64 V_gain, V_offset, V2A_gain, V2A_offset; + struct ab8500 *ab8500; + + ab8500 = gpadc->parent; /* First we read all OTP registers and store the error code */ for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) { @@ -614,7 +764,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * bt_h/l = btemp_high/low * vb_h/l = vbat_high/low * - * Data bits: + * Data bits 8500/9540: * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 * |.......|.......|.......|.......|.......|.......|.......|....... * | | vm_h9 | vm_h8 @@ -632,6 +782,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | * |.......|.......|.......|.......|.......|.......|.......|....... * + * Data bits 8540: + * OTP2 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | + * |.......|.......|.......|.......|.......|.......|.......|....... + * + * Data bits 8540: + * OTP4 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | | ib_h9 | ib_h8 | ib_h7 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 | + * * * Ideal output ADC codes corresponding to injected input voltages * during manufacturing is: @@ -644,38 +823,96 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * vbat_low: Vin = 2380mV / ADC ideal code = 33 */ - /* Calculate gain and offset for VMAIN if all reads succeeded */ - if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { - vmain_high = (((gpadc_cal[0] & 0x03) << 8) | - ((gpadc_cal[1] & 0x3F) << 2) | - ((gpadc_cal[2] & 0xC0) >> 6)); + if (is_ab8540(ab8500)) { + /* Calculate gain and offset for VMAIN if all reads succeeded*/ + if (!(ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[1] & 0xFF) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } - vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + /* Read IBAT calibration Data */ + for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) { + ret_otp4[i] = abx500_get_register_interruptible( + gpadc->dev, AB8500_OTP_EMUL, + otp4_cal_regs[i], &gpadc_otp4[i]); + if (ret_otp4[i] < 0) + dev_err(gpadc->dev, + "%s: read otp4 reg 0x%02x failed\n", + __func__, otp4_cal_regs[i]); + } - gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * - (19500 - 315) / (vmain_high - vmain_low); + /* Calculate gain and offset for IBAT if all reads succeeded */ + if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) { + ibat_high = (((gpadc_otp4[0] & 0x07) << 7) | + ((gpadc_otp4[1] & 0xFE) >> 1)); + ibat_low = (((gpadc_otp4[1] & 0x01) << 5) | + ((gpadc_otp4[2] & 0xF8) >> 3)); + + V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L) + << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low); + + V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) - + (((IBAT_VDROP_H - IBAT_VDROP_L) << + CALIB_SHIFT_IBAT) / (ibat_high - ibat_low)) + * ibat_high; + /* + * Result obtained is in mV (at a scale factor), + * we need to calculate gain and offset to get mA + */ + V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/ + (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN - + ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V) + << CALIB_SHIFT_IBAT) + / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; + gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset * + V2A_gain + V2A_offset; + } else { + gpadc->cal_data[ADC_INPUT_IBAT].gain = 0; + } - gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 - - (CALIB_SCALE * (19500 - 315) / - (vmain_high - vmain_low)) * vmain_high; + dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n", + gpadc->cal_data[ADC_INPUT_IBAT].gain, + gpadc->cal_data[ADC_INPUT_IBAT].offset); } else { - gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + /* Calculate gain and offset for VMAIN if all reads succeeded */ + if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[0] & 0x03) << 8) | + ((gpadc_cal[1] & 0x3F) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } } - /* Calculate gain and offset for BTEMP if all reads succeeded */ if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) { btemp_high = (((gpadc_cal[2] & 0x01) << 9) | - (gpadc_cal[3] << 1) | - ((gpadc_cal[4] & 0x80) >> 7)); - + (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7)); btemp_low = ((gpadc_cal[4] & 0x7C) >> 2); gpadc->cal_data[ADC_INPUT_BTEMP].gain = CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low); - gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 - - (CALIB_SCALE * (1300 - 21) / - (btemp_high - btemp_low)) * btemp_high; + (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low)) + * btemp_high; } else { gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0; } @@ -687,7 +924,6 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low); - gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 - (CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low)) * vbat_high; diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h index 7694e7ab1880..4131437ace4b 100644 --- a/include/linux/mfd/abx500/ab8500-gpadc.h +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -12,19 +12,32 @@ /* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2 * and ADCHwSel[4:0] in GPADCCtrl3 ) */ -#define BAT_CTRL 0x01 -#define BTEMP_BALL 0x02 -#define MAIN_CHARGER_V 0x03 -#define ACC_DETECT1 0x04 -#define ACC_DETECT2 0x05 -#define ADC_AUX1 0x06 -#define ADC_AUX2 0x07 -#define MAIN_BAT_V 0x08 -#define VBUS_V 0x09 -#define MAIN_CHARGER_C 0x0A -#define USB_CHARGER_C 0x0B -#define BK_BAT_V 0x0C -#define DIE_TEMP 0x0D +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D +#define USB_ID 0x0E +#define XTAL_TEMP 0x12 +#define VBAT_TRUE_MEAS 0x13 +#define BAT_CTRL_AND_IBAT 0x1C +#define VBAT_MEAS_AND_IBAT 0x1D +#define VBAT_TRUE_MEAS_AND_IBAT 0x1E +#define BAT_TEMP_AND_IBAT 0x1F + +/* Virtual channel used only for ibat convertion to ampere + * Battery current conversion (ibat) cannot be requested as a single conversion + * but it is always in combination with other input requests + */ +#define IBAT_VIRTUAL_CHANNEL 0xFF #define SAMPLE_1 1 #define SAMPLE_4 4 @@ -37,7 +50,6 @@ #define ADC_SW 0 #define ADC_HW 1 - struct ab8500_gpadc; struct ab8500_gpadc *ab8500_gpadc_get(char *name); @@ -51,6 +63,9 @@ static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat); int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, int ad_value); -- cgit v1.2.3 From bc6b4132bcae4b8e59766ba2dae8f377009b26d0 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 14:02:31 +0000 Subject: mfd: ab8500-debug: Add support for the AB8540 Allow GPADC debug information to be shown when executing on an AB8540 based platform. Signed-off-by: Alexandre Bourdiol Reviewed-by: Marcus COOPER Reviewed-by: Philippe LANGLAIS Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 286 +++++++++++++++++++++++++++++++- drivers/mfd/ab8500-gpadc.c | 44 +++++ include/linux/mfd/abx500/ab8500-gpadc.h | 3 + 3 files changed, 332 insertions(+), 1 deletion(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 074eea9e4bfd..1e44d65e1771 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1633,6 +1633,254 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = { .owner = THIS_MODULE, }; +static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p) +{ + int xtal_temp_raw; + int xtal_temp_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP, + avg_sample, trig_edge, trig_timer, conv_type); + xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP, + xtal_temp_raw); + + return seq_printf(s, "%d,0x%X\n", + xtal_temp_convert, xtal_temp_raw); +} + +static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8540_gpadc_xtal_temp_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_xtal_temp_fops = { + .open = ab8540_gpadc_xtal_temp_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p) +{ + int vbat_true_meas_raw; + int vbat_true_meas_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS, + avg_sample, trig_edge, trig_timer, conv_type); + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, + vbat_true_meas_raw); + + return seq_printf(s, "%d,0x%X\n", + vbat_true_meas_convert, vbat_true_meas_raw); +} + +static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_true_meas_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = { + .open = ab8540_gpadc_vbat_true_meas_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p) +{ + int bat_ctrl_raw; + int bat_ctrl_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + + bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL, + bat_ctrl_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + bat_ctrl_convert, bat_ctrl_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = { + .open = ab8540_gpadc_bat_ctrl_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p) +{ + int vbat_meas_raw; + int vbat_meas_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V, + vbat_meas_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + vbat_meas_convert, vbat_meas_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = { + .open = ab8540_gpadc_vbat_meas_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) +{ + int vbat_true_meas_raw; + int vbat_true_meas_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc, + VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge, + trig_timer, conv_type, &ibat_raw); + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, + VBAT_TRUE_MEAS, vbat_true_meas_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + vbat_true_meas_convert, vbat_true_meas_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { + .open = ab8540_gpadc_vbat_true_meas_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p) +{ + int bat_temp_raw; + int bat_temp_convert; + int ibat_raw; + int ibat_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT, + avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw); + bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL, + bat_temp_raw); + ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL, + ibat_raw); + + return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", + bat_temp_convert, bat_temp_raw, + ibat_convert, ibat_raw); +} + +static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode, + struct file *file) +{ + return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print, + inode->i_private); +} + +static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = { + .open = ab8540_gpadc_bat_temp_and_ibat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p) +{ + struct ab8500_gpadc *gpadc; + u16 vmain_l, vmain_h, btemp_l, btemp_h; + u16 vbat_l, vbat_h, ibat_l, ibat_h; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h, + &vbat_l, &vbat_h, &ibat_l, &ibat_h); + return seq_printf(s, "VMAIN_L:0x%X\n" + "VMAIN_H:0x%X\n" + "BTEMP_L:0x%X\n" + "BTEMP_H:0x%X\n" + "VBAT_L:0x%X\n" + "VBAT_H:0x%X\n" + "IBAT_L:0x%X\n" + "IBAT_H:0x%X\n" + , + vmain_l, + vmain_h, + btemp_l, + btemp_h, + vbat_l, + vbat_h, + ibat_l, + ibat_h); +} + +static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8540_gpadc_otp_cal_print, inode->i_private); +} + +static const struct file_operations ab8540_gpadc_otp_calib_fops = { + .open = ab8540_gpadc_otp_cal_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p) { return seq_printf(s, "%d\n", avg_sample); @@ -2386,7 +2634,43 @@ static int ab8500_debug_probe(struct platform_device *plf) ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); if (!file) goto err; - + if (is_ab8540(ab8500)) { + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); + if (!file) + goto err; + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, + &ab8540_gpadc_vbat_true_meas_fops); + if (!file) + goto err; + file = debugfs_create_file("batctrl_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("vbatmeas_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_meas_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("vbattruemeas_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_true_meas_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("battemp_and_ibat", + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); + if (!file) + goto err; + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); + if (!file) + goto err; + } file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops); if (!file) diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index c985b90577f6..e3535c74d5fe 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -135,6 +135,8 @@ enum cal_channels { struct adc_cal_data { s64 gain; s64 offset; + u16 otp_calib_hi; + u16 otp_calib_lo; }; /** @@ -829,6 +831,12 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) vmain_high = (((gpadc_cal[1] & 0xFF) << 2) | ((gpadc_cal[2] & 0xC0) >> 6)); vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = + (u16)vmain_high; + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = + (u16)vmain_low; + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * (19500 - 315) / (vmain_high - vmain_low); gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * @@ -856,6 +864,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) ibat_low = (((gpadc_otp4[1] & 0x01) << 5) | ((gpadc_otp4[2] & 0xF8) >> 3)); + gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi = + (u16)ibat_high; + gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo = + (u16)ibat_low; + V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L) << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low); @@ -892,6 +905,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) ((gpadc_cal[2] & 0xC0) >> 6)); vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi = + (u16)vmain_high; + gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo = + (u16)vmain_low; + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * (19500 - 315) / (vmain_high - vmain_low); @@ -902,12 +920,16 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; } } + /* Calculate gain and offset for BTEMP if all reads succeeded */ if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) { btemp_high = (((gpadc_cal[2] & 0x01) << 9) | (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7)); btemp_low = ((gpadc_cal[4] & 0x7C) >> 2); + gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high; + gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low; + gpadc->cal_data[ADC_INPUT_BTEMP].gain = CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low); gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 - @@ -922,6 +944,9 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]); vbat_low = ((gpadc_cal[6] & 0xFC) >> 2); + gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high; + gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low; + gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low); gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 - @@ -1131,6 +1156,25 @@ static void __exit ab8500_gpadc_exit(void) platform_driver_unregister(&ab8500_gpadc_driver); } +/** + * ab8540_gpadc_get_otp() - returns OTP values + * + */ +void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, + u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, + u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h) +{ + *vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo; + *vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi; + *btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo; + *btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi; + *vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo; + *vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi; + *ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo; + *ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi; + return ; +} + subsys_initcall_sync(ab8500_gpadc_init); module_exit(ab8500_gpadc_exit); diff --git a/include/linux/mfd/abx500/ab8500-gpadc.h b/include/linux/mfd/abx500/ab8500-gpadc.h index 4131437ace4b..49ded001049b 100644 --- a/include/linux/mfd/abx500/ab8500-gpadc.h +++ b/include/linux/mfd/abx500/ab8500-gpadc.h @@ -68,5 +68,8 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, int *ibat); int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, int ad_value); +void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, + u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, + u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h); #endif /* _AB8500_GPADC_H */ -- cgit v1.2.3 From 7c8f023616f89c3796331cece68b7efdc5a0b1ca Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 11 Feb 2013 10:49:41 +0000 Subject: mfd: ab8500-gpadc: Optimise GPADC driver Optimise GPADC driver: * for code readability and maintenance by grouping similar cheking * for performance by grouping several writing to control register Signed-off-by: Alexandre Bourdiol Signed-off-by: Lee Jones Reviewed-by: Philippe LANGLAIS Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-gpadc.c | 212 ++++++++++++--------------------------------- 1 file changed, 55 insertions(+), 157 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index e3535c74d5fe..af1db2a45e86 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -360,7 +360,12 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, { int ret; int looplimit = 0; + unsigned long completion_timeout; u8 val, low_data, high_data, low_data2, high_data2; + u8 val_reg1 = 0; + unsigned int delay_min = 0; + unsigned int delay_max = 0; + u8 data_low_addr, data_high_addr; if (!gpadc) return -ENODEV; @@ -392,12 +397,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, } /* Enable GPADC */ - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC); - if (ret < 0) { - dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n"); - goto out; - } + val_reg1 |= EN_GPADC; /* Select the channel source and set average samples */ switch (avg_sample) { @@ -415,9 +415,13 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, break; } - if (conv_type == ADC_HW) + if (conv_type == ADC_HW) { ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val); + val_reg1 |= EN_TRIG_EDGE; + if (trig_edge) + val_reg1 |= EN_FALLING; + } else ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val); @@ -432,123 +436,42 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, * charging current sense if it needed, ABB 3.0 needs some special * treatment too. */ - if ((conv_type == ADC_HW) && (trig_edge)) { - ret = abx500_mask_and_set_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_FALLING, EN_FALLING); - } - switch (channel) { case MAIN_CHARGER_C: case USB_CHARGER_C: - if (conv_type == ADC_HW) - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_ICHAR | EN_TRIG_EDGE, - EN_BUF | EN_ICHAR | EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_ICHAR, - EN_BUF | EN_ICHAR); - break; - - case XTAL_TEMP: - if (conv_type == ADC_HW) - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_TRIG_EDGE, - EN_BUF | EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF , - EN_BUF); - break; - - case VBAT_TRUE_MEAS: - if (conv_type == ADC_HW) - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_TRIG_EDGE, - EN_BUF | EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF , - EN_BUF); - break; - - case BAT_CTRL_AND_IBAT: - case VBAT_MEAS_AND_IBAT: - case VBAT_TRUE_MEAS_AND_IBAT: - case BAT_TEMP_AND_IBAT: - if (conv_type == ADC_HW) - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_TRIG_EDGE, - EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF, - 0); + val_reg1 |= EN_BUF | EN_ICHAR; break; - case BTEMP_BALL: if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { - if (conv_type == ADC_HW) - /* Turn on btemp pull-up on ABB 3.0 */ - ret = abx500_mask_and_set_register_interruptible - (gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE, - EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible - (gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | BTEMP_PULL_UP, - EN_BUF | BTEMP_PULL_UP); - - /* - * Delay might be needed for ABB8500 cut 3.0, if not, remove - * when hardware will be available - */ - usleep_range(1000, 1000); + val_reg1 |= EN_BUF | BTEMP_PULL_UP; + /* + * Delay might be needed for ABB8500 cut 3.0, if not, + * remove when hardware will be availible + */ + delay_min = 1000; /* Delay in micro seconds */ + delay_max = 10000; /* large range to optimise sleep mode */ break; } /* Intentional fallthrough */ default: - if (conv_type == ADC_HW) - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, AB8500_GPADC_CTRL1_REG, - EN_BUF | EN_TRIG_EDGE, - EN_BUF | EN_TRIG_EDGE); - else - ret = abx500_mask_and_set_register_interruptible( - gpadc->dev, - AB8500_GPADC, - AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF); + val_reg1 |= EN_BUF; break; } + + /* Write configuration to register */ + ret = abx500_set_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1); if (ret < 0) { dev_err(gpadc->dev, - "gpadc_conversion: select falling edge failed\n"); + "gpadc_conversion: set Control register failed\n"); goto out; } - /* Set trigger delay timer */ + if (delay_min != 0) + usleep_range(delay_min, delay_max); + if (conv_type == ADC_HW) { + /* Set trigger delay timer */ ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer); if (ret < 0) { @@ -556,10 +479,11 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, "gpadc_conversion: trig timer failed\n"); goto out; } - } - - /* Start SW conversion */ - if (conv_type == ADC_SW) { + completion_timeout = 2 * HZ; + data_low_addr = AB8500_GPADC_AUTODATAL_REG; + data_high_addr = AB8500_GPADC_AUTODATAH_REG; + } else { + /* Start SW conversion */ ret = abx500_mask_and_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV); @@ -568,61 +492,35 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, "gpadc_conversion: start s/w conv failed\n"); goto out; } + completion_timeout = msecs_to_jiffies(CONVERSION_TIME); + data_low_addr = AB8500_GPADC_MANDATAL_REG; + data_high_addr = AB8500_GPADC_MANDATAH_REG; } /* wait for completion of conversion */ - if (conv_type == ADC_HW) { - if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - 2 * HZ)) { - dev_err(gpadc->dev, - "timeout didn't receive hw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; - } - } else { - if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - msecs_to_jiffies(CONVERSION_TIME))) { - dev_err(gpadc->dev, - "timeout didn't receive sw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; - } + if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, + completion_timeout)) { + dev_err(gpadc->dev, + "timeout didn't receive GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; } /* Read the converted RAW data */ - if (conv_type == ADC_HW) { - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_AUTODATAL_REG, &low_data); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read hw low data failed\n"); - goto out; - } - - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_AUTODATAH_REG, &high_data); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read hw high data failed\n"); - goto out; - } - } else { - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_MANDATAL_REG, &low_data); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read sw low data failed\n"); - goto out; - } + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, data_low_addr, &low_data); + if (ret < 0) { + dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n"); + goto out; + } - ret = abx500_get_register_interruptible(gpadc->dev, - AB8500_GPADC, AB8500_GPADC_MANDATAH_REG, &high_data); - if (ret < 0) { - dev_err(gpadc->dev, - "gpadc_conversion: read sw high data failed\n"); - goto out; - } + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, data_high_addr, &high_data); + if (ret < 0) { + dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n"); + goto out; } + /* Check if double convertion is required */ if ((channel == BAT_CTRL_AND_IBAT) || (channel == VBAT_MEAS_AND_IBAT) || -- cgit v1.2.3 From 492390c8fd4a90b1e4ca371c8f8a23c63b04d7f9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 25 Feb 2013 15:06:18 +0000 Subject: mfd: ab8500-core: Add additional resources to ab8505_iddet_resources Add VBUS_DET_R, VBUS_DET_F IRQ, ID_DET_PLUGR and ID_DET_PLUGF IRQ information to ab8505_iddet_resources. These are required to get interrupts for AB8505 cut-2. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 0fc18e91310c..141572c6c392 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1016,6 +1016,30 @@ static struct resource ab8505_iddet_resources[] = { .end = AB8505_INT_KEYSTUCK, .flags = IORESOURCE_IRQ, }, + { + .name = "VBUS_DET_R", + .start = AB8500_INT_VBUS_DET_R, + .end = AB8500_INT_VBUS_DET_R, + .flags = IORESOURCE_IRQ, + }, + { + .name = "VBUS_DET_F", + .start = AB8500_INT_VBUS_DET_F, + .end = AB8500_INT_VBUS_DET_F, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ID_DET_PLUGR", + .start = AB8500_INT_ID_DET_PLUGR, + .end = AB8500_INT_ID_DET_PLUGR, + .flags = IORESOURCE_IRQ, + }, + { + .name = "ID_DET_PLUGF", + .start = AB8500_INT_ID_DET_PLUGF, + .end = AB8500_INT_ID_DET_PLUGF, + .flags = IORESOURCE_IRQ, + }, }; static struct resource ab8500_temp_resources[] = { -- cgit v1.2.3 From c55355221e259bc4d6c1dc3ebe0852afce644a40 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 22 Aug 2012 13:08:11 +0200 Subject: mfd: ab8500-sysctrl: AB8505 doesn't have SYSCLKREQ5..8 So we're removing support for it. Signed-off-by: Rabin Vincent Signed-off-by: Lee Jones Tested-by: Marcus COOPER Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-sysctrl.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c index f43c42b9f32c..272479cdb107 100644 --- a/drivers/mfd/ab8500-sysctrl.c +++ b/drivers/mfd/ab8500-sysctrl.c @@ -182,9 +182,9 @@ EXPORT_SYMBOL(ab8500_sysctrl_write); static int ab8500_sysctrl_probe(struct platform_device *pdev) { + struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct ab8500_platform_data *plat; struct ab8500_sysctrl_platform_data *pdata; - int ret, i, j; plat = dev_get_platdata(pdev->dev.parent); @@ -196,20 +196,27 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev) pdata = plat->sysctrl; - - for (i = AB8500_SYSCLKREQ1RFCLKBUF; - i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) { - j = i - AB8500_SYSCLKREQ1RFCLKBUF; - ret = ab8500_sysctrl_write(i, 0xff, - pdata->initial_req_buf_config[j]); - dev_dbg(&pdev->dev, - "Setting SysClkReq%dRfClkBuf 0x%X\n", - j + 1, - pdata->initial_req_buf_config[j]); - if (ret < 0) { - dev_err(&pdev->dev, - "unable to set sysClkReq%dRfClkBuf: " - "%d\n", j + 1, ret); + if (pdata) { + int last, ret, i, j; + + if (is_ab8505(ab8500)) + last = AB8500_SYSCLKREQ4RFCLKBUF; + else + last = AB8500_SYSCLKREQ8RFCLKBUF; + + for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) { + j = i - AB8500_SYSCLKREQ1RFCLKBUF; + ret = ab8500_sysctrl_write(i, 0xff, + pdata->initial_req_buf_config[j]); + dev_dbg(&pdev->dev, + "Setting SysClkReq%dRfClkBuf 0x%X\n", + j + 1, + pdata->initial_req_buf_config[j]); + if (ret < 0) { + dev_err(&pdev->dev, + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); + } } } -- cgit v1.2.3 From c7ebaee292fb0f935752d50ef9bad1db74efde6e Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 14:03:33 +0000 Subject: mfd: ab8500-debugfs: Dump sim registers This patch allows to dump the SIM registers from debugfs. It will temporary change the config to allow APE side to read the SIM registers. Note that this read can cause problem on modem side since the modem can't read these registers while the operation is ongoing. Signed-off-by: Mattias Wallin Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Jonas ABERG Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 78 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 1e44d65e1771..a653a0747b31 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1244,6 +1244,79 @@ static int ab8500_hwreg_open(struct inode *inode, struct file *file) return single_open(file, ab8500_hwreg_print, inode->i_private); } +#define AB8500_SUPPLY_CONTROL_CONFIG_1 0x01 +#define AB8500_SUPPLY_CONTROL_REG 0x00 +#define AB8500_FIRST_SIM_REG 0x80 +#define AB8500_LAST_SIM_REG 0x8B +#define AB8505_LAST_SIM_REG 0x8C + +static int ab8500_print_modem_registers(struct seq_file *s, void *p) +{ + struct device *dev = s->private; + struct ab8500 *ab8500; + int err; + u8 value; + u8 orig_value; + u32 bank = AB8500_REGU_CTRL2; + u32 last_sim_reg = AB8500_LAST_SIM_REG; + u32 reg; + + ab8500 = dev_get_drvdata(dev->parent); + dev_warn(dev, "WARNING! This operation can interfer with modem side\n" + "and should only be done with care\n"); + + err = abx500_get_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, &orig_value); + if (err < 0) { + dev_err(dev, "ab->read fail %d\n", err); + return err; + } + /* Config 1 will allow APE side to read SIM registers */ + err = abx500_set_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, + AB8500_SUPPLY_CONTROL_CONFIG_1); + if (err < 0) { + dev_err(dev, "ab->write fail %d\n", err); + return err; + } + + seq_printf(s, " bank 0x%02X:\n", bank); + + if (is_ab9540(ab8500) || is_ab8505(ab8500)) + last_sim_reg = AB8505_LAST_SIM_REG; + + for (reg = AB8500_FIRST_SIM_REG; reg <= last_sim_reg; reg++) { + err = abx500_get_register_interruptible(dev, + bank, reg, &value); + if (err < 0) { + dev_err(dev, "ab->read fail %d\n", err); + return err; + } + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", + bank, reg, value); + } + err = abx500_set_register_interruptible(dev, + AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value); + if (err < 0) { + dev_err(dev, "ab->write fail %d\n", err); + return err; + } + return 0; +} + +static int ab8500_modem_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_print_modem_registers, inode->i_private); +} + +static const struct file_operations ab8500_modem_fops = { + .open = ab8500_modem_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) { int bat_ctrl_raw; @@ -2570,6 +2643,11 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUGO), + ab8500_dir, &plf->dev, &ab8500_modem_fops); + if (!file) + goto err; + file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); if (!file) -- cgit v1.2.3 From 127629d74efff202372fbd6097e607fcb2c8a7af Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 14:04:37 +0000 Subject: mfd: ab8500-debug: Add ADC input channel usb_id in debugfs Signed-off-by: Yang QU Signed-off-by: Lee Jones Reviewed-by: Alexandre BOURDIOL Reviewed-by: Philippe LANGLAIS Reviewed-by: Mattias WALLIN Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index a653a0747b31..44c9bc1f2544 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1706,6 +1706,35 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = { .owner = THIS_MODULE, }; +static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p) +{ + int usb_id_raw; + int usb_id_convert; + struct ab8500_gpadc *gpadc; + + gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID, + avg_sample, trig_edge, trig_timer, conv_type); + usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID, + usb_id_raw); + + return seq_printf(s, "%d,0x%X\n", + usb_id_convert, usb_id_raw); +} + +static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file) +{ + return single_open(file, ab8500_gpadc_usb_id_print, inode->i_private); +} + +static const struct file_operations ab8500_gpadc_usb_id_fops = { + .open = ab8500_gpadc_usb_id_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p) { int xtal_temp_raw; @@ -2712,6 +2741,12 @@ static int ab8500_debug_probe(struct platform_device *plf) ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); if (!file) goto err; + + file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUGO), + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops); + if (!file) + goto err; + if (is_ab8540(ab8500)) { file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); -- cgit v1.2.3 From abee26cdb685fa47d3d17ec9cf39f6149ce67083 Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Fri, 28 Sep 2012 09:34:24 +0200 Subject: mfd: ab8500-core: Show turn on status at boot Several states can be detected when a device is initially turned on. This patch displays these states in the log. If none of the states are true, then we report that too. Signed-off-by: Mattias Wallin Signed-off-by: Lee Jones Reviewed-by: Marcus COOPER Reviewed-by: Jonas ABERG Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 141572c6c392..a4120edbccf2 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1542,6 +1542,15 @@ static int ab8500_probe(struct platform_device *pdev) "Battery level lower than power on reset threshold", "Power on key 1 pressed longer than 10 seconds", "DB8500 thermal shutdown"}; + static char *turn_on_status[] = { + "Battery rising (Vbat)", + "Power On Key 1 dbF", + "Power On Key 2 dbF", + "RTC Alarm", + "Main Charger Detect", + "Vbus Detect (USB)", + "USB ID Detect", + "UART Factory Mode Detect"}; struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev); const struct platform_device_id *platid = platform_get_device_id(pdev); enum ab8500_version version = AB8500_VERSION_UNDEFINED; @@ -1655,9 +1664,26 @@ static int ab8500_probe(struct platform_device *pdev) } else { printk(KERN_CONT " None\n"); } + ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK, + AB8500_TURN_ON_STATUS, &value); + if (ret < 0) + return ret; + dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value); + + if (value) { + for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) { + if (value & 1) + printk("\"%s\" ", turn_on_status[i]); + value = value >> 1; + } + printk("\n"); + } else { + printk("None\n"); + } if (plat && plat->init) plat->init(ab8500); + if (is_ab9540(ab8500)) { ret = get_register_interruptible(ab8500, AB8500_CHARGER, AB8500_CH_USBCH_STAT1_REG, &value); -- cgit v1.2.3 From f38487f22dee6eaca8d06cac99377693803cda8f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 14:09:08 +0000 Subject: mfd: ab8500-debugfs: Change AB8500 debug permissions Enable group write permissions for ab8500 debug MFD driver. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 56 ++++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 44c9bc1f2544..4779e2f834b4 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -2623,22 +2623,22 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; - file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_bank_fops); if (!file) goto err; - file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_address_fops); if (!file) goto err; - file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_val_fops); if (!file) goto err; - file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_subscribe_fops); if (!file) goto err; @@ -2662,97 +2662,97 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; - file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); if (!file) goto err; - file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_hwreg_fops); if (!file) goto err; - file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_dir, &plf->dev, &ab8500_modem_fops); if (!file) goto err; - file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); if (!file) goto err; - file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); if (!file) goto err; - file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); if (!file) goto err; - file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); if (!file) goto err; - file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); if (!file) goto err; - file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); if (!file) goto err; - file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); if (!file) goto err; - file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); if (!file) goto err; - file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); if (!file) goto err; - file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); if (!file) goto err; - file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); if (!file) goto err; - file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); if (!file) goto err; - file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR), + file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); if (!file) goto err; - file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops); if (!file) goto err; if (is_ab8540(ab8500)) { - file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); if (!file) goto err; - file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_vbat_true_meas_fops); if (!file) @@ -2779,27 +2779,27 @@ static int ab8500_debug_probe(struct platform_device *plf) &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); if (!file) goto err; - file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); if (!file) goto err; } - file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops); if (!file) goto err; - file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops); if (!file) goto err; - file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops); if (!file) goto err; - file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUGO), + file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP), ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops); if (!file) goto err; -- cgit v1.2.3 From 971480f520a5ed9e54443a9b2b5711eedf51c77a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 19 Nov 2012 12:20:03 +0100 Subject: mfd: ab8500-debug: Add register map for ab8540. Required to read out correct debug information from the AB chip. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 422 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 419 insertions(+), 3 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 4779e2f834b4..862dbfeb619e 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -846,6 +846,422 @@ struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = { }, }; +struct ab8500_prcmu_ranges ab8540_debug_ranges[AB8500_NUM_BANKS] = { + [AB8500_M_FSM_RANK] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0B, + }, + }, + }, + [AB8500_SYS_CTRL1_BLOCK] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x04, + }, + { + .first = 0x42, + .last = 0x42, + }, + { + .first = 0x50, + .last = 0x54, + }, + { + .first = 0x57, + .last = 0x57, + }, + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x90, + .last = 0x90, + }, + }, + }, + [AB8500_SYS_CTRL2_BLOCK] = { + .num_ranges = 5, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x0D, + }, + { + .first = 0x0F, + .last = 0x10, + }, + { + .first = 0x20, + .last = 0x21, + }, + { + .first = 0x32, + .last = 0x3C, + }, + { + .first = 0x40, + .last = 0x42, + }, + }, + }, + [AB8500_REGU_CTRL1] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x03, + .last = 0x15, + }, + { + .first = 0x20, + .last = 0x20, + }, + { + .first = 0x80, + .last = 0x85, + }, + { + .first = 0x87, + .last = 0x88, + }, + }, + }, + [AB8500_REGU_CTRL2] = { + .num_ranges = 8, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x08, + .last = 0x15, + }, + { + .first = 0x17, + .last = 0x19, + }, + { + .first = 0x1B, + .last = 0x1D, + }, + { + .first = 0x1F, + .last = 0x2F, + }, + { + .first = 0x31, + .last = 0x3A, + }, + { + .first = 0x43, + .last = 0x44, + }, + { + .first = 0x48, + .last = 0x49, + }, + }, + }, + [AB8500_USB] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x80, + .last = 0x83, + }, + { + .first = 0x87, + .last = 0x8A, + }, + { + .first = 0x91, + .last = 0x94, + }, + }, + }, + [AB8500_TVOUT] = { + .num_ranges = 0, + .range = NULL + }, + [AB8500_DBI] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x07, + }, + { + .first = 0x10, + .last = 0x11, + }, + { + .first = 0x20, + .last = 0x21, + }, + { + .first = 0x30, + .last = 0x43, + }, + }, + }, + [AB8500_ECI_AV_ACC] = { + .num_ranges = 2, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x03, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_RESERVED] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_GPADC] = { + .num_ranges = 4, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x01, + }, + { + .first = 0x04, + .last = 0x06, + }, + { + .first = 0x09, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_CHARGER] = { + .num_ranges = 10, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x02, + .last = 0x05, + }, + { + .first = 0x40, + .last = 0x44, + }, + { + .first = 0x50, + .last = 0x57, + }, + { + .first = 0x60, + .last = 0x60, + }, + { + .first = 0x70, + .last = 0x70, + }, + { + .first = 0xA0, + .last = 0xA9, + }, + { + .first = 0xAF, + .last = 0xB2, + }, + { + .first = 0xC0, + .last = 0xC6, + }, + { + .first = 0xF5, + .last = 0xF5, + }, + }, + }, + [AB8500_GAS_GAUGE] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x00, + }, + { + .first = 0x07, + .last = 0x0A, + }, + { + .first = 0x10, + .last = 0x14, + }, + }, + }, + [AB8500_AUDIO] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x9f, + }, + }, + }, + [AB8500_INTERRUPT] = { + .num_ranges = 6, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x05, + }, + { + .first = 0x0B, + .last = 0x0D, + }, + { + .first = 0x12, + .last = 0x20, + }, + /* Latch registers should not be read here */ + { + .first = 0x40, + .last = 0x45, + }, + { + .first = 0x4B, + .last = 0x4D, + }, + { + .first = 0x52, + .last = 0x60, + }, + /* LatchHier registers should not be read here */ + }, + }, + [AB8500_RTC] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x07, + }, + { + .first = 0x0B, + .last = 0x18, + }, + { + .first = 0x20, + .last = 0x25, + }, + }, + }, + [AB8500_MISC] = { + .num_ranges = 9, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x16, + }, + { + .first = 0x20, + .last = 0x26, + }, + { + .first = 0x30, + .last = 0x36, + }, + { + .first = 0x40, + .last = 0x49, + }, + { + .first = 0x50, + .last = 0x50, + }, + { + .first = 0x60, + .last = 0x6B, + }, + { + .first = 0x70, + .last = 0x74, + }, + { + .first = 0x80, + .last = 0x82, + }, + }, + }, + [AB8500_DEVELOPMENT] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x01, + }, + { + .first = 0x06, + .last = 0x06, + }, + { + .first = 0x10, + .last = 0x21, + }, + }, + }, + [AB8500_DEBUG] = { + .num_ranges = 3, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x01, + .last = 0x0C, + }, + { + .first = 0x0E, + .last = 0x11, + }, + { + .first = 0x80, + .last = 0x81, + }, + }, + }, + [AB8500_PROD_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_STE_TEST] = { + .num_ranges = 0, + .range = NULL, + }, + [AB8500_OTP_EMUL] = { + .num_ranges = 1, + .range = (struct ab8500_reg_range[]) { + { + .first = 0x00, + .last = 0x3F, + }, + }, + }, +}; + + static irqreturn_t ab8500_debug_handler(int irq, void *data) { char buf[16]; @@ -937,7 +1353,7 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p) seq_printf(s, AB8500_NAME_STRING " register values:\n"); - for (i = 1; i < AB8500_NUM_BANKS; i++) { + for (i = 0; i < AB8500_NUM_BANKS; i++) { err = seq_printf(s, " bank 0x%02X:\n", i); ab8500_registers_print(dev, i, s); @@ -979,7 +1395,7 @@ void ab8500_dump_all_banks_to_mem(void) pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " "for crash analyze.\n"); - for (bank = 1; bank < AB8500_NUM_BANKS; bank++) { + for (bank = 0; bank < AB8500_NUM_BANKS; bank++) { for (i = 0; i < debug_ranges[bank].num_ranges; i++) { u8 reg; @@ -2653,7 +3069,7 @@ static int ab8500_debug_probe(struct platform_device *plf) debug_ranges = ab8505_debug_ranges; num_interrupt_lines = AB9540_NR_IRQS; } else if (is_ab8540(ab8500)) { - debug_ranges = ab8505_debug_ranges; + debug_ranges = ab8540_debug_ranges; num_interrupt_lines = AB8540_NR_IRQS; } -- cgit v1.2.3 From 9ee17676a5a36621db020c596e766fec24aae959 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Tue, 20 Nov 2012 14:57:25 +0100 Subject: mfd: ab8500-core: Add abx500-clk as an mfd child device Hierarchically, the abx500-clk shall be considered as a child of the ab8500 core. The abx500-clk is intiated at arch init and thus the clks will be available when clients needs them. Signed-off-by: Ulf Hansson Signed-off-by: Lee Jones Reviewed-by: Philippe LANGLAIS Reviewed-by: Patrice CHOTARD Reviewed-by: Gabriel FERNANDEZ Reviewed-by: Philippe BEGNIC Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index a4120edbccf2..caab1fd3a03f 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1188,6 +1188,10 @@ static struct mfd_cell ab9540_devs[] = { { .name = "ab8500-regulator", }, + { + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, { .name = "ab8500-gpadc", .of_compatible = "stericsson,ab8500-gpadc", @@ -1255,6 +1259,10 @@ static struct mfd_cell ab8505_devs[] = { { .name = "ab8500-regulator", }, + { + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), @@ -1314,6 +1322,10 @@ static struct mfd_cell ab8540_devs[] = { { .name = "ab8500-regulator", }, + { + .name = "abx500-clk", + .of_compatible = "stericsson,abx500-clk", + }, { .name = "ab8500-gpadc", .num_resources = ARRAY_SIZE(ab8505_gpadc_resources), -- cgit v1.2.3 From eb1f95872a053c5aed3e3d13234f8f68e3b2a55a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 22 Nov 2012 18:50:06 +0100 Subject: mfd: ab8500-debug: Add explicit dependencies As I am working on SPARSE_IRQ a number of implicit resource grabs in the kernel become evident. For example, some includes like would implicitly include and then from there . In many cases it is masking the fact that drivers do not properly use resources to pass their dependencies, base addresses etc. So write explicit #include statements with TODO items to have this fixed the proper way to all drivers doing this. Signed-off-by: Linus Walleij Signed-off-by: Lee Jones Reviewed-by: Philippe LANGLAIS Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 862dbfeb619e..810ac6faabba 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -91,6 +91,9 @@ #include #endif +/* TODO: this file should not reference IRQ_DB8500_AB8500! */ +#include + static u32 debug_bank; static u32 debug_address; -- cgit v1.2.3 From 7b830ae4e538cf04d3b57432bb08f58b828dbafa Mon Sep 17 00:00:00 2001 From: srinidhi kasagar Date: Fri, 23 Nov 2012 15:11:00 +0530 Subject: mfd: ab8500-debug: Convert to kstrtoul_from_user Use kstrtoul_from_user for getting an unsigned long from userspace which is less error prone. Signed-off-by: srinidhi kasagar Signed-off-by: Linus Walleij Signed-off-by: Lee Jones Reviewed-by: Jonas ABERG Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 100 +++++++++++++------------------------------ 1 file changed, 30 insertions(+), 70 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 810ac6faabba..e33c1628c65b 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1479,7 +1479,6 @@ static ssize_t ab8500_bank_write(struct file *file, unsigned long user_bank; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_bank); if (err) return err; @@ -1512,7 +1511,6 @@ static ssize_t ab8500_address_write(struct file *file, unsigned long user_address; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_address); if (err) return err; @@ -1522,6 +1520,7 @@ static ssize_t ab8500_address_write(struct file *file, return -EINVAL; } debug_address = user_address; + return count; } @@ -1556,7 +1555,6 @@ static ssize_t ab8500_val_write(struct file *file, unsigned long user_val; int err; - /* Get userspace string and assure termination */ err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) return err; @@ -2418,20 +2416,13 @@ static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_avg_sample; int err; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_avg_sample); + err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample); if (err) - return -EINVAL; + return err; + if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4) || (user_avg_sample == SAMPLE_8) || (user_avg_sample == SAMPLE_16)) { @@ -2441,7 +2432,8 @@ static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, "should be egal to 1, 4, 8 or 16\n"); return -EINVAL; } - return buf_size; + + return count; } static const struct file_operations ab8500_gpadc_avg_sample_fops = { @@ -2469,20 +2461,13 @@ static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_trig_edge; int err; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_trig_edge); + err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge); if (err) - return -EINVAL; + return err; + if ((user_trig_edge == RISING_EDGE) || (user_trig_edge == FALLING_EDGE)) { trig_edge = (u8) user_trig_edge; @@ -2492,7 +2477,8 @@ static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, "Enter 1. Falling edge\n"); return -EINVAL; } - return buf_size; + + return count; } static const struct file_operations ab8500_gpadc_trig_edge_fops = { @@ -2520,20 +2506,13 @@ static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_trig_timer; int err; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_trig_timer); + err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer); if (err) - return -EINVAL; + return err; + if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) { trig_timer = (u8) user_trig_timer; } else { @@ -2541,7 +2520,8 @@ static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, "should be beetween 0 to 255\n"); return -EINVAL; } - return buf_size; + + return count; } static const struct file_operations ab8500_gpadc_trig_timer_fops = { @@ -2569,20 +2549,13 @@ static ssize_t ab8500_gpadc_conv_type_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_conv_type; int err; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf) - 1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_conv_type); + err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type); if (err) - return -EINVAL; + return err; + if ((user_conv_type == ADC_SW) || (user_conv_type == ADC_HW)) { conv_type = (u8) user_conv_type; @@ -2592,7 +2565,8 @@ static ssize_t ab8500_gpadc_conv_type_write(struct file *file, "Enter 1. ADC HW conversion\n"); return -EINVAL; } - return buf_size; + + return count; } static const struct file_operations ab8500_gpadc_conv_type_fops = { @@ -2809,21 +2783,14 @@ static ssize_t ab8500_subscribe_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; unsigned int irq_index; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val < irq_first) { dev_err(dev, "debugfs error input < %d\n", irq_first); return -EINVAL; @@ -2843,7 +2810,7 @@ static ssize_t ab8500_subscribe_write(struct file *file, */ dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute), GFP_KERNEL); - event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL); + event_name[irq_index] = kmalloc(count, GFP_KERNEL); sprintf(event_name[irq_index], "%lu", user_val); dev_attr[irq_index]->show = show_irq; dev_attr[irq_index]->store = NULL; @@ -2865,7 +2832,7 @@ static ssize_t ab8500_subscribe_write(struct file *file, return err; } - return buf_size; + return count; } static ssize_t ab8500_unsubscribe_write(struct file *file, @@ -2873,21 +2840,14 @@ static ssize_t ab8500_unsubscribe_write(struct file *file, size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; - char buf[32]; - int buf_size; unsigned long user_val; int err; unsigned int irq_index; - /* Get userspace string and assure termination */ - buf_size = min(count, (sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - err = strict_strtoul(buf, 0, &user_val); + err = kstrtoul_from_user(user_buf, count, 0, &user_val); if (err) - return -EINVAL; + return err; + if (user_val < irq_first) { dev_err(dev, "debugfs error input < %d\n", irq_first); return -EINVAL; @@ -2912,7 +2872,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file, kfree(event_name[irq_index]); kfree(dev_attr[irq_index]); - return buf_size; + return count; } /* -- cgit v1.2.3 From f348fefd2a227122eb2d723e255c60cf491d0557 Mon Sep 17 00:00:00 2001 From: Dariusz Szymczak Date: Mon, 26 Nov 2012 13:31:26 +0100 Subject: mfd: ab8500-core: Hierarchical interrupt registers Make use of the hierarchical interrupt rergister called ITLatchHier1 - 3 also for the 8500 platform (currently the hierarchical interrupt registers are used only for the 8540 and 9540 platforms). This will make the interrupt routing go faster since fewer i2c reads need to made in the most common cases. Signed-off-by: Dariusz Szymczak Signed-off-by: Lee Jones Reviewed-by: Mian Yousaf KAUKAB Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 82 ++++------------------------------------------- 1 file changed, 6 insertions(+), 76 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index caab1fd3a03f..c7ff55753a8f 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -549,66 +549,6 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev) return IRQ_HANDLED; } -/** - * ab8500_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ - * - * @ab8500: ab8500_irq controller to operate on. - * @irq: index of the interrupt requested in the chip IRQs - * - * Useful for drivers to request their own IRQs. - */ -static int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq) -{ - if (!ab8500) - return -EINVAL; - - return irq_create_mapping(ab8500->domain, irq); -} - -static irqreturn_t ab8500_irq(int irq, void *dev) -{ - struct ab8500 *ab8500 = dev; - int i; - - dev_vdbg(ab8500->dev, "interrupt\n"); - - atomic_inc(&ab8500->transfer_ongoing); - - for (i = 0; i < ab8500->mask_size; i++) { - int regoffset = ab8500->irq_reg_offset[i]; - int status; - u8 value; - - /* - * Interrupt register 12 doesn't exist prior to AB8500 version - * 2.0 - */ - if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500)) - continue; - - if (regoffset < 0) - continue; - - status = get_register_interruptible(ab8500, AB8500_INTERRUPT, - AB8500_IT_LATCH1_REG + regoffset, &value); - if (status < 0 || value == 0) - continue; - - do { - int bit = __ffs(value); - int line = i * 8 + bit; - int virq = ab8500_irq_get_virq(ab8500, line); - - handle_nested_irq(virq); - ab8500_debug_register_interrupt(line); - value &= ~(1 << bit); - - } while (value); - } - atomic_dec(&ab8500->transfer_ongoing); - return IRQ_HANDLED; -} - static int ab8500_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) { @@ -1737,22 +1677,12 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; - /* Activate this feature only in ab9540 */ - /* till tests are done on ab8500 1p2 or later*/ - if (is_ab9540(ab8500) || is_ab8540(ab8500)) - ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, - ab8500_hierarchical_irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - "ab8500", ab8500); - } - else { - ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, - ab8500_irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - "ab8500", ab8500); - if (ret) - return ret; - } + ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL, + ab8500_hierarchical_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "ab8500", ab8500); + if (ret) + return ret; if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, -- cgit v1.2.3 From 9f9ba15f74cec390ad4a58f9e73fed591e46ddab Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Feb 2013 12:05:15 +0000 Subject: mfd: ab8500-debugfs: Trivially beautify the debugfs driver Just lots of white space corrections, changing some of the 4 space tabs to 8 and pulling back some of the double tabbing back into singles, such as the remaining of the driver. Signed-off-by: Lee Jones Acked-by: Samuel Ortiz --- drivers/mfd/ab8500-debugfs.c | 186 +++++++++++++++++++++---------------------- 1 file changed, 89 insertions(+), 97 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index e33c1628c65b..b88bbbc15f1e 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -1504,8 +1504,8 @@ static int ab8500_address_open(struct inode *inode, struct file *file) } static ssize_t ab8500_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; unsigned long user_address; @@ -1548,8 +1548,8 @@ static int ab8500_val_open(struct inode *inode, struct file *file) } static ssize_t ab8500_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) + const char __user *user_buf, + size_t count, loff_t *ppos) { struct device *dev = ((struct seq_file *)(file->private_data))->private; unsigned long user_val; @@ -1747,7 +1747,7 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p) BAT_CTRL, bat_ctrl_raw); return seq_printf(s, "%d,0x%X\n", - bat_ctrl_convert, bat_ctrl_raw); + bat_ctrl_convert, bat_ctrl_raw); } static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file) @@ -1776,11 +1776,11 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p) btemp_ball_raw); return seq_printf(s, - "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); + "%d,0x%X\n", btemp_ball_convert, btemp_ball_raw); } static int ab8500_gpadc_btemp_ball_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); } @@ -1810,10 +1810,10 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p) } static int ab8500_gpadc_main_charger_v_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_main_charger_v_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_main_charger_v_fops = { @@ -1837,14 +1837,14 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p) acc_detect1_raw); return seq_printf(s, "%d,0x%X\n", - acc_detect1_convert, acc_detect1_raw); + acc_detect1_convert, acc_detect1_raw); } static int ab8500_gpadc_acc_detect1_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_acc_detect1_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_acc_detect1_fops = { @@ -1868,14 +1868,14 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p) ACC_DETECT2, acc_detect2_raw); return seq_printf(s, "%d,0x%X\n", - acc_detect2_convert, acc_detect2_raw); + acc_detect2_convert, acc_detect2_raw); } static int ab8500_gpadc_acc_detect2_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_acc_detect2_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_acc_detect2_fops = { @@ -1899,7 +1899,7 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p) aux1_raw); return seq_printf(s, "%d,0x%X\n", - aux1_convert, aux1_raw); + aux1_convert, aux1_raw); } static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file) @@ -1957,11 +1957,11 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p) main_bat_v_raw); return seq_printf(s, "%d,0x%X\n", - main_bat_v_convert, main_bat_v_raw); + main_bat_v_convert, main_bat_v_raw); } static int ab8500_gpadc_main_bat_v_open(struct inode *inode, - struct file *file) + struct file *file) { return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); } @@ -1987,7 +1987,7 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p) vbus_v_raw); return seq_printf(s, "%d,0x%X\n", - vbus_v_convert, vbus_v_raw); + vbus_v_convert, vbus_v_raw); } static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file) @@ -2016,14 +2016,14 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p) MAIN_CHARGER_C, main_charger_c_raw); return seq_printf(s, "%d,0x%X\n", - main_charger_c_convert, main_charger_c_raw); + main_charger_c_convert, main_charger_c_raw); } static int ab8500_gpadc_main_charger_c_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_main_charger_c_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_main_charger_c_fops = { @@ -2047,14 +2047,14 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p) USB_CHARGER_C, usb_charger_c_raw); return seq_printf(s, "%d,0x%X\n", - usb_charger_c_convert, usb_charger_c_raw); + usb_charger_c_convert, usb_charger_c_raw); } static int ab8500_gpadc_usb_charger_c_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_usb_charger_c_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8500_gpadc_usb_charger_c_fops = { @@ -2078,7 +2078,7 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p) BK_BAT_V, bk_bat_v_raw); return seq_printf(s, "%d,0x%X\n", - bk_bat_v_convert, bk_bat_v_raw); + bk_bat_v_convert, bk_bat_v_raw); } static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file) @@ -2107,7 +2107,7 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p) die_temp_raw); return seq_printf(s, "%d,0x%X\n", - die_temp_convert, die_temp_raw); + die_temp_convert, die_temp_raw); } static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file) @@ -2136,7 +2136,7 @@ static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p) usb_id_raw); return seq_printf(s, "%d,0x%X\n", - usb_id_convert, usb_id_raw); + usb_id_convert, usb_id_raw); } static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file) @@ -2165,13 +2165,13 @@ static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p) xtal_temp_raw); return seq_printf(s, "%d,0x%X\n", - xtal_temp_convert, xtal_temp_raw); + xtal_temp_convert, xtal_temp_raw); } static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_xtal_temp_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_xtal_temp_fops = { @@ -2195,14 +2195,14 @@ static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p) vbat_true_meas_raw); return seq_printf(s, "%d,0x%X\n", - vbat_true_meas_convert, vbat_true_meas_raw); + vbat_true_meas_convert, vbat_true_meas_raw); } static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_vbat_true_meas_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = { @@ -2231,15 +2231,15 @@ static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p) ibat_raw); return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", - bat_ctrl_convert, bat_ctrl_raw, - ibat_convert, ibat_raw); + bat_ctrl_convert, bat_ctrl_raw, + ibat_convert, ibat_raw); } static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = { @@ -2267,15 +2267,15 @@ static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p) ibat_raw); return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", - vbat_meas_convert, vbat_meas_raw, - ibat_convert, ibat_raw); + vbat_meas_convert, vbat_meas_raw, + ibat_convert, ibat_raw); } static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = { @@ -2304,15 +2304,15 @@ static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void * ibat_raw); return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", - vbat_true_meas_convert, vbat_true_meas_raw, - ibat_convert, ibat_raw); + vbat_true_meas_convert, vbat_true_meas_raw, + ibat_convert, ibat_raw); } static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { @@ -2340,15 +2340,15 @@ static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p) ibat_raw); return seq_printf(s, "%d,0x%X\n" "%d,0x%X\n", - bat_temp_convert, bat_temp_raw, - ibat_convert, ibat_raw); + bat_temp_convert, bat_temp_raw, + ibat_convert, ibat_raw); } static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode, struct file *file) { return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print, - inode->i_private); + inode->i_private); } static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = { @@ -2369,22 +2369,14 @@ static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p) ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h, &vbat_l, &vbat_h, &ibat_l, &ibat_h); return seq_printf(s, "VMAIN_L:0x%X\n" - "VMAIN_H:0x%X\n" - "BTEMP_L:0x%X\n" - "BTEMP_H:0x%X\n" - "VBAT_L:0x%X\n" - "VBAT_H:0x%X\n" - "IBAT_L:0x%X\n" - "IBAT_H:0x%X\n" - , - vmain_l, - vmain_h, - btemp_l, - btemp_h, - vbat_l, - vbat_h, - ibat_l, - ibat_h); + "VMAIN_H:0x%X\n" + "BTEMP_L:0x%X\n" + "BTEMP_H:0x%X\n" + "VBAT_L:0x%X\n" + "VBAT_H:0x%X\n" + "IBAT_L:0x%X\n" + "IBAT_H:0x%X\n", + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); } static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file) @@ -2408,7 +2400,7 @@ static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p) static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_avg_sample_print, - inode->i_private); + inode->i_private); } static ssize_t ab8500_gpadc_avg_sample_write(struct file *file, @@ -2453,7 +2445,7 @@ static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p) static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_trig_edge_print, - inode->i_private); + inode->i_private); } static ssize_t ab8500_gpadc_trig_edge_write(struct file *file, @@ -2498,7 +2490,7 @@ static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p) static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_trig_timer_print, - inode->i_private); + inode->i_private); } static ssize_t ab8500_gpadc_trig_timer_write(struct file *file, @@ -2541,7 +2533,7 @@ static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p) static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_gpadc_conv_type_print, - inode->i_private); + inode->i_private); } static ssize_t ab8500_gpadc_conv_type_write(struct file *file, @@ -2753,7 +2745,7 @@ static int ab8500_subscribe_unsubscribe_open(struct inode *inode, struct file *file) { return single_open(file, ab8500_subscribe_unsubscribe_print, - inode->i_private); + inode->i_private); } /* @@ -2970,7 +2962,7 @@ static int ab8500_debug_probe(struct platform_device *plf) irq_first = platform_get_irq_byname(plf, "IRQ_FIRST"); if (irq_first < 0) { dev_err(&plf->dev, "First irq not found, err %d\n", - irq_first); + irq_first); ret = irq_first; goto out_freeevent_name; } @@ -2978,7 +2970,7 @@ static int ab8500_debug_probe(struct platform_device *plf) irq_last = platform_get_irq_byname(plf, "IRQ_LAST"); if (irq_last < 0) { dev_err(&plf->dev, "Last irq not found, err %d\n", - irq_last); + irq_last); ret = irq_last; goto out_freeevent_name; } @@ -2988,37 +2980,37 @@ static int ab8500_debug_probe(struct platform_device *plf) goto err; ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING, - ab8500_dir); + ab8500_dir); if (!ab8500_gpadc_dir) goto err; file = debugfs_create_file("all-bank-registers", S_IRUGO, - ab8500_dir, &plf->dev, &ab8500_registers_fops); + ab8500_dir, &plf->dev, &ab8500_registers_fops); if (!file) goto err; file = debugfs_create_file("all-banks", S_IRUGO, - ab8500_dir, &plf->dev, &ab8500_all_banks_fops); + ab8500_dir, &plf->dev, &ab8500_all_banks_fops); if (!file) goto err; file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_bank_fops); + ab8500_dir, &plf->dev, &ab8500_bank_fops); if (!file) goto err; file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_address_fops); + ab8500_dir, &plf->dev, &ab8500_address_fops); if (!file) goto err; file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_val_fops); + ab8500_dir, &plf->dev, &ab8500_val_fops); if (!file) goto err; file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_subscribe_fops); + ab8500_dir, &plf->dev, &ab8500_subscribe_fops); if (!file) goto err; @@ -3037,17 +3029,17 @@ static int ab8500_debug_probe(struct platform_device *plf) } file = debugfs_create_file("interrupts", (S_IRUGO), - ab8500_dir, &plf->dev, &ab8500_interrupts_fops); + ab8500_dir, &plf->dev, &ab8500_interrupts_fops); if (!file) goto err; file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); + ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops); if (!file) goto err; file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_dir, &plf->dev, &ab8500_hwreg_fops); + ab8500_dir, &plf->dev, &ab8500_hwreg_fops); if (!file) goto err; @@ -3057,67 +3049,67 @@ static int ab8500_debug_probe(struct platform_device *plf) goto err; file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops); if (!file) goto err; file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops); if (!file) goto err; file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops); if (!file) goto err; file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops); if (!file) goto err; file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops); if (!file) goto err; file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops); if (!file) goto err; file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops); if (!file) goto err; file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops); if (!file) goto err; file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops); if (!file) goto err; file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops); if (!file) goto err; file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops); if (!file) goto err; file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops); if (!file) goto err; file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP), - ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); + ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops); if (!file) goto err; @@ -3137,25 +3129,25 @@ static int ab8500_debug_probe(struct platform_device *plf) if (!file) goto err; file = debugfs_create_file("batctrl_and_ibat", - (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, - &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops); + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops); if (!file) goto err; file = debugfs_create_file("vbatmeas_and_ibat", - (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, - &plf->dev, - &ab8540_gpadc_vbat_meas_and_ibat_fops); + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_meas_and_ibat_fops); if (!file) goto err; file = debugfs_create_file("vbattruemeas_and_ibat", - (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, - &plf->dev, - &ab8540_gpadc_vbat_true_meas_and_ibat_fops); + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, + &ab8540_gpadc_vbat_true_meas_and_ibat_fops); if (!file) goto err; file = debugfs_create_file("battemp_and_ibat", - (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, - &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); + (S_IRUGO | S_IWUGO), ab8500_gpadc_dir, + &plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops); if (!file) goto err; file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), -- cgit v1.2.3 From 93ff722e88530b9719cbf53be4f3197722461394 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 31 May 2012 16:16:36 +0200 Subject: ab8500-fg: Add power cut feature for ab8505 and ab8540 Add support for a power cut feature which allows user to configure when ab8505 and ab8540 based platforms should shut down system due to low battery. Signed-off-by: Lee Jones --- drivers/mfd/ab8500-core.c | 36 +++ drivers/power/ab8500_bmdata.c | 5 + drivers/power/ab8500_fg.c | 474 +++++++++++++++++++++++++++++++++++ include/linux/mfd/abx500.h | 10 + include/linux/mfd/abx500/ab8500-bm.h | 18 ++ 5 files changed, 543 insertions(+) (limited to 'drivers/mfd') diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index c7ff55753a8f..f276352cc9ef 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -113,6 +113,7 @@ #define AB8500_SWITCH_OFF_STATUS 0x00 #define AB8500_TURN_ON_STATUS 0x00 +#define AB8505_TURN_ON_STATUS_2 0x04 #define AB8500_CH_USBCH_STAT1_REG 0x02 #define VBUS_DET_DBNC100 0x02 @@ -1401,6 +1402,21 @@ static ssize_t show_turn_on_status(struct device *dev, return sprintf(buf, "%#x\n", value); } +static ssize_t show_turn_on_status_2(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + u8 value; + struct ab8500 *ab8500; + + ab8500 = dev_get_drvdata(dev); + ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK, + AB8505_TURN_ON_STATUS_2, &value); + if (ret < 0) + return ret; + return sprintf(buf, "%#x\n", (value & 0x1)); +} + static ssize_t show_ab9540_dbbrstn(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1457,6 +1473,7 @@ exit: static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL); static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL); static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL); +static DEVICE_ATTR(turn_on_status_2, S_IRUGO, show_turn_on_status_2, NULL); static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR, show_ab9540_dbbrstn, store_ab9540_dbbrstn); @@ -1467,6 +1484,11 @@ static struct attribute *ab8500_sysfs_entries[] = { NULL, }; +static struct attribute *ab8505_sysfs_entries[] = { + &dev_attr_turn_on_status_2.attr, + NULL, +}; + static struct attribute *ab9540_sysfs_entries[] = { &dev_attr_chip_id.attr, &dev_attr_switch_off_status.attr, @@ -1479,6 +1501,10 @@ static struct attribute_group ab8500_attr_group = { .attrs = ab8500_sysfs_entries, }; +static struct attribute_group ab8505_attr_group = { + .attrs = ab8505_sysfs_entries, +}; + static struct attribute_group ab9540_attr_group = { .attrs = ab9540_sysfs_entries, }; @@ -1719,6 +1745,12 @@ static int ab8500_probe(struct platform_device *pdev) else ret = sysfs_create_group(&ab8500->dev->kobj, &ab8500_attr_group); + + if ((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) + ret = sysfs_create_group(&ab8500->dev->kobj, + &ab8505_attr_group); + if (ret) dev_err(ab8500->dev, "error creating sysfs entries\n"); @@ -1735,6 +1767,10 @@ static int ab8500_remove(struct platform_device *pdev) else sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group); + if ((is_ab8505(ab8500) || is_ab9540(ab8500)) && + ab8500->chip_id >= AB8500_CUT2P0) + sysfs_remove_group(&ab8500->dev->kobj, &ab8505_attr_group); + mfd_remove_devices(ab8500->dev); return 0; diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 7a96c0650fbb..e8759763fbe0 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -407,6 +407,11 @@ static const struct abx500_fg_parameters fg = { .battok_raising_th_sel1 = 2860, .maint_thres = 95, .user_cap_limit = 15, + .pcut_enable = 1, + .pcut_max_time = 127, + .pcut_flag_time = 112, + .pcut_max_restart = 15, + .pcut_debounce_time = 2, }; static const struct abx500_maxim_parameters maxi_params = { diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 25dae4c4b0ef..92f342bcf188 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -2344,6 +2344,50 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) dev_err(di->dev, "BattOk init write failed.\n"); goto out; } + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(di->dev) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__); + goto out; + }; + } out: return ret; } @@ -2546,6 +2590,428 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di) return ret; } + +static ssize_t ab8505_powercut_flagtime_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_flagtime_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + long unsigned reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + + if (reg_value > 0x7F) { + dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_maxtime_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; + +} + +static ssize_t ab8505_powercut_maxtime_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x7F) { + dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_restart_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_restart_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0xF) { + dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n"); + +fail: + return count; + +} + +static ssize_t ab8505_powercut_timer_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_restart_counter_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) + goto fail; + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x1) { + dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_flag_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_debounce_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_debounce_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x7) { + dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_enable_status_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5)); + +fail: + return ret; +} + +static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = { + __ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write), + __ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write), + __ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_restart_read, ab8505_powercut_restart_write), + __ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL), + __ATTR(powercut_restart_counter, S_IRUGO, + ab8505_powercut_restart_counter_read, NULL), + __ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_read, ab8505_powercut_write), + __ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL), + __ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_debounce_read, ab8505_powercut_debounce_write), + __ATTR(powercut_enable_status, S_IRUGO, + ab8505_powercut_enable_status_read, NULL), +}; + +static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev) +{ + unsigned int i, j; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + for (j = 0; j < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); j++) + if (device_create_file(dev, &ab8505_fg_sysfs_psy_attrs[j])) + goto sysfs_psy_create_attrs_failed_ab8505; + } + return 0; +sysfs_psy_create_attrs_failed_ab8505: + dev_err(dev, "Failed creating sysfs psy attrs for ab8505.\n"); + while (j--) + device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]); + + return -EIO; +} + +static void ab8500_fg_sysfs_psy_remove_attrs(struct device *dev) +{ + unsigned int i; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++) + (void)device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]); + } +} + /* Exposure to the sysfs interface <> */ #if defined(CONFIG_PM) @@ -2607,6 +3073,7 @@ static int ab8500_fg_remove(struct platform_device *pdev) ab8500_fg_sysfs_exit(di); flush_scheduled_work(); + ab8500_fg_sysfs_psy_remove_attrs(di->fg_psy.dev); power_supply_unregister(&di->fg_psy); platform_set_drvdata(pdev, NULL); return ret; @@ -2772,6 +3239,13 @@ static int ab8500_fg_probe(struct platform_device *pdev) goto free_irq; } + ret = ab8500_fg_sysfs_psy_create_attrs(di->fg_psy.dev); + if (ret) { + dev_err(di->dev, "failed to create FG psy\n"); + ab8500_fg_sysfs_exit(di); + goto free_irq; + } + /* Calibrate the fg first time */ di->flags.calibrate = true; di->calib_state = AB8500_FG_CALIB_INIT; diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 9ead60bc66b7..188aedc322c2 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -89,6 +89,11 @@ struct abx500_fg; * points. * @maint_thres This is the threshold where we stop reporting * battery full while in maintenance, in per cent + * @pcut_enable: Enable power cut feature in ab8505 + * @pcut_max_time: Max time threshold + * @pcut_flag_time: Flagtime threshold + * @pcut_max_restart: Max number of restarts + * @pcut_debounce_time: Sets battery debounce time */ struct abx500_fg_parameters { int recovery_sleep_timer; @@ -106,6 +111,11 @@ struct abx500_fg_parameters { int battok_raising_th_sel1; int user_cap_limit; int maint_thres; + bool pcut_enable; + u8 pcut_max_time; + u8 pcut_flag_time; + u8 pcut_max_restart; + u8 pcut_debounce_time; }; /** diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h index 8d35bfe164c8..0efbe0efee7f 100644 --- a/include/linux/mfd/abx500/ab8500-bm.h +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -235,6 +235,14 @@ /* Battery type */ #define BATTERY_UNKNOWN 00 +/* Registers for pcut feature in ab8505 and ab9540 */ +#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12 +#define AB8505_RTC_PCUT_TIME_REG 0x13 +#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14 +#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15 +#define AB8505_RTC_PCUT_RESTART_REG 0x16 +#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17 + /** * struct res_to_temp - defines one point in a temp to res curve. To * be used in battery packs that combines the identification resistor with a @@ -283,6 +291,11 @@ struct ab8500_fg; * points. * @maint_thres This is the threshold where we stop reporting * battery full while in maintenance, in per cent + * @pcut_enable: Enable power cut feature in ab8505 + * @pcut_max_time: Max time threshold + * @pcut_flag_time: Flagtime threshold + * @pcut_max_restart: Max number of restarts + * @pcut_debunce_time: Sets battery debounce time */ struct ab8500_fg_parameters { int recovery_sleep_timer; @@ -299,6 +312,11 @@ struct ab8500_fg_parameters { int battok_raising_th_sel1; int user_cap_limit; int maint_thres; + bool pcut_enable; + u8 pcut_max_time; + u8 pcut_flag_time; + u8 pcut_max_restart; + u8 pcut_debunce_time; }; /** -- cgit v1.2.3