From 54b2912040d15725004a598cf600f501ab6405f4 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 28 Feb 2014 20:28:55 -0300 Subject: [media] rc: img-ir: add to build Add ImgTec IR decoder driver to the build system. Signed-off-by: James Hogan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/img-ir/Kconfig | 26 ++++++++++++++++++++++++++ drivers/media/rc/img-ir/Makefile | 6 ++++++ 2 files changed, 32 insertions(+) create mode 100644 drivers/media/rc/img-ir/Kconfig create mode 100644 drivers/media/rc/img-ir/Makefile (limited to 'drivers/media/rc/img-ir') diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig new file mode 100644 index 000000000000..60eaba6a0843 --- /dev/null +++ b/drivers/media/rc/img-ir/Kconfig @@ -0,0 +1,26 @@ +config IR_IMG + tristate "ImgTec IR Decoder" + depends on RC_CORE + select IR_IMG_HW if !IR_IMG_RAW + help + Say Y or M here if you want to use the ImgTec infrared decoder + functionality found in SoCs such as TZ1090. + +config IR_IMG_RAW + bool "Raw decoder" + depends on IR_IMG + help + Say Y here to enable the raw mode driver which passes raw IR signal + changes to the IR raw decoders for software decoding. This is much + less reliable (due to lack of timestamps) and consumes more + processing power than using hardware decode, but can be useful for + testing, debug, and to make more protocols available. + +config IR_IMG_HW + bool "Hardware decoder" + depends on IR_IMG + help + Say Y here to enable the hardware decode driver which decodes the IR + signals in hardware. This is more reliable, consumes less processing + power since only a single interrupt is received for each scancode, + and allows an IR scancode to be used as a wake event. diff --git a/drivers/media/rc/img-ir/Makefile b/drivers/media/rc/img-ir/Makefile new file mode 100644 index 000000000000..4ef86edec873 --- /dev/null +++ b/drivers/media/rc/img-ir/Makefile @@ -0,0 +1,6 @@ +img-ir-y := img-ir-core.o +img-ir-$(CONFIG_IR_IMG_RAW) += img-ir-raw.o +img-ir-$(CONFIG_IR_IMG_HW) += img-ir-hw.o +img-ir-objs := $(img-ir-y) + +obj-$(CONFIG_IR_IMG) += img-ir.o -- cgit v1.2.3