From 5f7f0317ed28b86bdae9baf65bb72d405b6f79ee Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Thu, 25 Dec 2014 09:49:06 -0800 Subject: IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers This is the main peripheral IRQ controller on the BCM7xxx MIPS chips; it has the following characteristics: - 64 to 160+ level IRQs - Atomic set/clear registers - Reasonably predictable register layout (N status words, then N mask status words, then N mask set words, then N mask clear words) - SMP affinity supported on most systems - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3 This driver registers one IRQ domain and one IRQ chip to cover all instances of the block. Up to 4 instances of the block may appear, as it supports 4-way IRQ affinity on BCM7435. The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC is used instead. So this driver is primarily intended for MIPS STB chips. Signed-off-by: Kevin Cernekee Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8844/ Signed-off-by: Ralf Baechle --- drivers/irqchip/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/irqchip/Makefile') diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 42965d2476bb..89e45613de76 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o +obj-$(CONFIG_BCM7038_L1_IRQ) += irq-bcm7038-l1.o obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o -- cgit v1.2.3