From 1bc857f700fb14bbcb990a81b1255f39807ae59e Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 26 Jul 2011 10:54:55 +0100 Subject: ARM: gpio: omap: convert drivers to use asm/gpio.h rather than mach/gpio.h Signed-off-by: Russell King --- drivers/input/keyboard/omap-keypad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 33d0bdc837c0..323bcdfff248 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -35,7 +35,7 @@ #include #include #include -#include +#include #include #include #include -- cgit v1.2.3 From cfb7d557242783bc3bfe77683ced20b4909258ec Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Fri, 26 Aug 2011 23:10:02 -0700 Subject: Input: wacom - remove pressure for touch devices Touch devices do not report valid pressure or capacitance. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 14 -------------- drivers/input/tablet/wacom_wac.c | 6 +++--- 2 files changed, 3 insertions(+), 17 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index d27c9d91630b..958b4eb6369d 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -229,13 +229,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi get_unaligned_le16(&report[i + 3]); i += 4; } - } else if (usage == WCM_DIGITIZER) { - /* max pressure isn't reported - features->pressure_max = (unsigned short) - (report[i+4] << 8 | report[i + 3]); - */ - features->pressure_max = 255; - i += 4; } break; @@ -291,13 +284,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi pen = 1; i++; break; - - case HID_USAGE_UNDEFINED: - if (usage == WCM_DESKTOP && finger) /* capacity */ - features->pressure_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; } break; diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c1c2f7b28d89..3eccf212d5b2 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -818,7 +818,6 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) x <<= 5; y <<= 5; } - input_report_abs(input, ABS_MT_PRESSURE, p); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } @@ -1056,10 +1055,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, - features->pressure_fuzz, 0); if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, + features->pressure_fuzz, 0); + /* penabled devices have fixed resolution for each model */ input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); -- cgit v1.2.3 From 1fab84aa635572fbd74df8fd4fd25ea0a24c76e5 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Fri, 26 Aug 2011 23:18:22 -0700 Subject: Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner The Wacom PenPartner should advertise its stylus tip and button in addition to the eraser tool. These are both physically present on the hardware, and emitted from 'wacom_penpartner_irq'. Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 3eccf212d5b2..2d88316d0e54 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1191,13 +1191,13 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case PL: case PTU: case DTU: - __set_bit(BTN_TOOL_PEN, input_dev->keybit); - __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ case PENPARTNER: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); break; case BAMBOO_PT: -- cgit v1.2.3 From 7b727acc412c9320dc56a0fd7312febf8710ac0e Mon Sep 17 00:00:00 2001 From: axel lin Date: Thu, 25 Aug 2011 09:42:09 -0700 Subject: Input: cm109 - fix checking return value of usb_control_msg If successful, usb_control_msg returns the number of bytes transferred, otherwise a negative error number. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov --- drivers/input/misc/cm109.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index b09c7d127219..ab860511f016 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -475,7 +475,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) le16_to_cpu(dev->ctl_req->wIndex), dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); - if (error && error != EINTR) + if (error < 0 && error != -EINTR) err("%s: usb_control_msg() failed %d", __func__, error); } -- cgit v1.2.3 From 8c6756603976e9d21bba9913cd80c38ec529a1fb Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 26 Aug 2011 23:37:33 -0700 Subject: Input: adp5588-keys - remove incorrect modalias For i2c drivers, we should use "i2c:" prefix for modalias. MODULE_DEVICE_TABLE will setup the modulalias for us, thus adding a MODULE_ALIAS is redundant (in addition to being incorrect). Signed-off-by: Axel Lin Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/adp5588-keys.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 7b404e5443ed..e34eeb8ae371 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -668,4 +668,3 @@ module_exit(adp5588_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich "); MODULE_DESCRIPTION("ADP5588/87 Keypad driver"); -MODULE_ALIAS("platform:adp5588-keys"); -- cgit v1.2.3 From 3512069eefd3c3424b12f21a68fd473c3fd57220 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Thu, 8 Sep 2011 09:38:14 -0700 Subject: Input: wacom - add POINTER and DIRECT device properties Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the hardware supported by the Wacom driver. The DIRECT property is assigned to devices with an embedded screen (i.e. touchscreens and display tablets). The POINTER property is assigned to those without embedded screens. Signed-off-by: Jason Gerecke Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/hid/hid-wacom.c | 2 ++ drivers/input/tablet/wacom_wac.c | 25 ++++++++++++++++++++++++- drivers/input/touchscreen/wacom_w8001.c | 2 ++ 3 files changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 06888323828c..5b9267dd3d66 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -383,6 +383,8 @@ move_on: hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; + __set_bit(INPUT_PROP_POINTER, input->propbit); + /* Basics */ input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 2d88316d0e54..c31e4e9f2690 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1098,6 +1098,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case WACOM_21UX2: @@ -1126,6 +1128,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, } input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; @@ -1150,6 +1155,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, /* fall through */ case INTUOS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + wacom_setup_intuos(wacom_wac); break; @@ -1165,6 +1172,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case TABLETPC2FG: @@ -1183,14 +1192,24 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ /* fall through */ case PL: - case PTU: case DTU: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + break; + + case PTU: __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ @@ -1198,11 +1217,15 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case BAMBOO_PT: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + if (features->device_type == BTN_TOOL_DOUBLETAP) { __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index c14412ef4648..9941d39df43d 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -383,6 +383,8 @@ static int w8001_setup(struct w8001 *w8001) dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name)); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + /* penabled? */ error = w8001_command(w8001, W8001_CMD_QUERY, true); if (!error) { -- cgit v1.2.3 From 1c601beaf21671b5033169d04efeda462bf58f01 Mon Sep 17 00:00:00 2001 From: Pieter-Augustijn Van Malleghem Date: Fri, 9 Sep 2011 13:29:45 -0700 Subject: Input: bcm5974 - add MacBookAir4,1 trackpad support This patch adds trackpad support for the MacBookAir4,1, released in July 2011. It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and Chase Douglas. Signed-off-by: Pieter-Augustijn Van Malleghem Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/bcm5974.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index da280189ef07..5ec617e28f7e 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -67,6 +67,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +/* MacbookAir4,1 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b /* MacbookAir4,2 (unibody, July 2011) */ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d @@ -112,6 +116,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), + /* MacbookAir4,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS), /* MacbookAir4,2 */ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), @@ -334,6 +342,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + }, {} }; -- cgit v1.2.3 From 8f9068609e8a5b4cbac9e0cf8332b5dcabf05422 Mon Sep 17 00:00:00 2001 From: Chris Bagwell Date: Fri, 9 Sep 2011 13:38:10 -0700 Subject: Input: wacom - fix touch parsing on newer Bamboos Bamboos with Product ID's > 0xD4 return values unrelated to pressure in touch 1 pressure field. They also report 2nd touch X/Y values shifted down 1 byte (where pressure was). This results in jumpy 1 finger touch and totally invalid 2nd finger data. For touch detection, switch to a Touch Present single bit that all versions of Bamboo support. For touch 2 offset, calculate offset based on a bit that is set different between the two packet layouts. Since touch pressure reports were removed from driver, there was no need to be reading pressure any more. Signed-off-by: Chris Bagwell Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c31e4e9f2690..0dc97ec15c28 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -800,20 +800,22 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) int i; for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - bool touch = p && !wacom->shared->stylus_in_proximity; + int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); + bool touch = data[offset + 3] & 0x80; - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); /* * Touch events need to be disabled while stylus is * in proximity because user's hand is resting on touchpad * and sending unwanted events. User expects tablet buttons * to continue working though. */ + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; + int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { x <<= 5; y <<= 5; -- cgit v1.2.3 From 7e968985cb82c011403432c2f2dbd18660780679 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 15 Sep 2011 15:39:25 +0300 Subject: Input: twl6040-vibra: Use accessor to get revision information Signed-off-by: Peter Ujfalusi Acked-by: Dmitry Torokhov Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- drivers/input/misc/twl6040-vibra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index c43002e7ec72..154b7a324d67 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -97,7 +97,7 @@ static void twl6040_vibra_enable(struct vibra_info *info) } twl6040_power(info->twl6040, 1); - if (twl6040->rev <= TWL6040_REV_ES1_1) { + if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) { /* * ERRATA: Disable overcurrent protection for at least * 3ms when enabling vibrator drivers to avoid false -- cgit v1.2.3 From 9688efda3fb0abb487ae44ced1dd02d14a4312c4 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Sat, 6 Aug 2011 18:18:07 -0300 Subject: [media] move ati_remote driver from input/misc to media/rc The driver will be migrated to the RC driver API in a following commit. [mchehab@redhat.com: Fix some bad whitespacing] Signed-off-by: Anssi Hannula Signed-off-by: Mauro Carvalho Chehab --- drivers/input/misc/Kconfig | 16 - drivers/input/misc/Makefile | 1 - drivers/input/misc/ati_remote.c | 867 ---------------------------------------- drivers/media/rc/Kconfig | 20 +- drivers/media/rc/Makefile | 1 + drivers/media/rc/ati_remote.c | 867 ++++++++++++++++++++++++++++++++++++++++ 6 files changed, 886 insertions(+), 886 deletions(-) delete mode 100644 drivers/input/misc/ati_remote.c create mode 100644 drivers/media/rc/ati_remote.c (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index c9104bb4db06..05cbdabeb124 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -183,22 +183,6 @@ config INPUT_ATLAS_BTNS To compile this driver as a module, choose M here: the module will be called atlas_btns. -config INPUT_ATI_REMOTE - tristate "ATI / X10 USB RF remote control" - depends on USB_ARCH_HAS_HCD - select USB - help - Say Y here if you want to use an ATI or X10 "Lola" USB remote control. - These are RF remotes with USB receivers. - The ATI remote comes with many of ATI's All-In-Wonder video cards. - The X10 "Lola" remote is available at: - - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - config INPUT_ATI_REMOTE2 tristate "ATI / Philips USB RF remote control" depends on USB_ARCH_HAS_HCD diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 299ad5edba84..9032d34cfe0d 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o obj-$(CONFIG_INPUT_APANEL) += apanel.o -obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_BFIN_ROTARY) += bfin_rotary.o diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c deleted file mode 100644 index bce57129afba..000000000000 --- a/drivers/input/misc/ati_remote.c +++ /dev/null @@ -1,867 +0,0 @@ -/* - * USB ATI Remote support - * - * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman - * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev - * - * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including - * porting to the 2.6 kernel interfaces, along with other modification - * to better match the style of the existing usb/input drivers. However, the - * protocol and hardware handling is essentially unchanged from 2.1.1. - * - * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by - * Vojtech Pavlik. - * - * Changes: - * - * Feb 2004: Torrey Hoffman - * Version 2.2.0 - * Jun 2004: Torrey Hoffman - * Version 2.2.1 - * Added key repeat support contributed by: - * Vincent Vanackere - * Added support for the "Lola" remote contributed by: - * Seth Cohn - * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * - * Hardware & software notes - * - * These remote controls are distributed by ATI as part of their - * "All-In-Wonder" video card packages. The receiver self-identifies as a - * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". - * - * The "Lola" remote is available from X10. See: - * http://www.x10.com/products/lola_sg1.htm - * The Lola is similar to the ATI remote but has no mouse support, and slightly - * different keys. - * - * It is possible to use multiple receivers and remotes on multiple computers - * simultaneously by configuring them to use specific channels. - * - * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. - * Actually, it may even support more, at least in some revisions of the - * hardware. - * - * Each remote can be configured to transmit on one channel as follows: - * - Press and hold the "hand icon" button. - * - When the red LED starts to blink, let go of the "hand icon" button. - * - When it stops blinking, input the channel code as two digits, from 01 - * to 16, and press the hand icon again. - * - * The timing can be a little tricky. Try loading the module with debug=1 - * to have the kernel print out messages about the remote control number - * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. - * - * The driver has a "channel_mask" parameter. This bitmask specifies which - * channels will be ignored by the module. To mask out channels, just add - * all the 2^channel_number values together. - * - * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote - * ignore signals coming from remote controls transmitting on channel 4, but - * accept all other channels. - * - * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be - * ignored. - * - * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this - * parameter are unused. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Module and Version Information, Module Parameters - */ - -#define ATI_REMOTE_VENDOR_ID 0x0bc7 -#define LOLA_REMOTE_PRODUCT_ID 0x0002 -#define LOLA2_REMOTE_PRODUCT_ID 0x0003 -#define ATI_REMOTE_PRODUCT_ID 0x0004 -#define NVIDIA_REMOTE_PRODUCT_ID 0x0005 -#define MEDION_REMOTE_PRODUCT_ID 0x0006 - -#define DRIVER_VERSION "2.2.1" -#define DRIVER_AUTHOR "Torrey Hoffman " -#define DRIVER_DESC "ATI/X10 RF USB Remote Control" - -#define NAME_BUFSIZE 80 /* size of product name, path buffers */ -#define DATA_BUFSIZE 63 /* size of URB data buffers */ - -/* - * Duplicate event filtering time. - * Sequential, identical KIND_FILTERED inputs with less than - * FILTER_TIME milliseconds between them are considered as repeat - * events. The hardware generates 5 events for the first keypress - * and we have to take this into account for an accurate repeat - * behaviour. - */ -#define FILTER_TIME 60 /* msec */ -#define REPEAT_DELAY 500 /* msec */ - -static unsigned long channel_mask; -module_param(channel_mask, ulong, 0644); -MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); - -static int repeat_filter = FILTER_TIME; -module_param(repeat_filter, int, 0644); -MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); - -static int repeat_delay = REPEAT_DELAY; -module_param(repeat_delay, int, 0644); -MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); - -#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) -#undef err -#define err(format, arg...) printk(KERN_ERR format , ## arg) - -static struct usb_device_id ati_remote_table[] = { - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) }, - { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, - {} /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, ati_remote_table); - -/* Get hi and low bytes of a 16-bits int */ -#define HI(a) ((unsigned char)((a) >> 8)) -#define LO(a) ((unsigned char)((a) & 0xff)) - -#define SEND_FLAG_IN_PROGRESS 1 -#define SEND_FLAG_COMPLETE 2 - -/* Device initialization strings */ -static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; -static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; - -struct ati_remote { - struct input_dev *idev; - struct usb_device *udev; - struct usb_interface *interface; - - struct urb *irq_urb; - struct urb *out_urb; - struct usb_endpoint_descriptor *endpoint_in; - struct usb_endpoint_descriptor *endpoint_out; - unsigned char *inbuf; - unsigned char *outbuf; - dma_addr_t inbuf_dma; - dma_addr_t outbuf_dma; - - unsigned char old_data[2]; /* Detect duplicate events */ - unsigned long old_jiffies; - unsigned long acc_jiffies; /* handle acceleration */ - unsigned long first_jiffies; - - unsigned int repeat_count; - - char name[NAME_BUFSIZE]; - char phys[NAME_BUFSIZE]; - - wait_queue_head_t wait; - int send_flags; -}; - -/* "Kinds" of messages sent from the hardware to the driver. */ -#define KIND_END 0 -#define KIND_LITERAL 1 /* Simply pass to input system */ -#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ -#define KIND_LU 3 /* Directional keypad diagonals - left up, */ -#define KIND_RU 4 /* right up, */ -#define KIND_LD 5 /* left down, */ -#define KIND_RD 6 /* right down */ -#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ - -/* Translation table from hardware messages to input events. */ -static const struct { - short kind; - unsigned char data1, data2; - int type; - unsigned int code; - int value; -} ati_remote_tbl[] = { - /* Directional control pad axes */ - {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ - {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ - {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ - {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ - /* Directional control pad diagonals */ - {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ - {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ - {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ - {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ - - /* "Mouse button" buttons */ - {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ - {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ - {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ - {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ - - /* Artificial "doubleclick" events are generated by the hardware. - * They are mapped to the "side" and "extra" mouse buttons here. */ - {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ - {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ - - /* keyboard. */ - {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1}, - {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1}, - {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1}, - {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1}, - {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1}, - {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1}, - {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1}, - {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1}, - {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1}, - {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1}, - {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1}, - {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1}, - {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1}, - {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1}, - {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1}, - {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1}, - - /* "special" keys */ - {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */ - {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */ - {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */ - {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */ - {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */ - {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */ - {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */ - {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */ - {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */ - {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */ - {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */ - {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */ - {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */ - {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */ - {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */ - {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */ - {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */ - {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */ - {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */ - {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */ - {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */ - {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */ - {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */ - {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */ - {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ - {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */ - {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */ - {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */ - {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */ - {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */ - {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */ - {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ - - {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} -}; - -/* Local function prototypes */ -static int ati_remote_open (struct input_dev *inputdev); -static void ati_remote_close (struct input_dev *inputdev); -static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); -static void ati_remote_irq_out (struct urb *urb); -static void ati_remote_irq_in (struct urb *urb); -static void ati_remote_input_report (struct urb *urb); -static int ati_remote_initialize (struct ati_remote *ati_remote); -static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id); -static void ati_remote_disconnect (struct usb_interface *interface); - -/* usb specific object to register with the usb subsystem */ -static struct usb_driver ati_remote_driver = { - .name = "ati_remote", - .probe = ati_remote_probe, - .disconnect = ati_remote_disconnect, - .id_table = ati_remote_table, -}; - -/* - * ati_remote_dump_input - */ -static void ati_remote_dump(struct device *dev, unsigned char *data, - unsigned int len) -{ - if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00)) - dev_warn(dev, "Weird byte 0x%02x\n", data[0]); - else if (len == 4) - dev_warn(dev, "Weird key %02x %02x %02x %02x\n", - data[0], data[1], data[2], data[3]); - else - dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n", - len, data[0], data[1], data[2], data[3], data[4], data[5]); -} - -/* - * ati_remote_open - */ -static int ati_remote_open(struct input_dev *inputdev) -{ - struct ati_remote *ati_remote = input_get_drvdata(inputdev); - - /* On first open, submit the read urb which was set up previously. */ - ati_remote->irq_urb->dev = ati_remote->udev; - if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { - dev_err(&ati_remote->interface->dev, - "%s: usb_submit_urb failed!\n", __func__); - return -EIO; - } - - return 0; -} - -/* - * ati_remote_close - */ -static void ati_remote_close(struct input_dev *inputdev) -{ - struct ati_remote *ati_remote = input_get_drvdata(inputdev); - - usb_kill_urb(ati_remote->irq_urb); -} - -/* - * ati_remote_irq_out - */ -static void ati_remote_irq_out(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - - if (urb->status) { - dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", - __func__, urb->status); - return; - } - - ati_remote->send_flags |= SEND_FLAG_COMPLETE; - wmb(); - wake_up(&ati_remote->wait); -} - -/* - * ati_remote_sendpacket - * - * Used to send device initialization strings - */ -static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data) -{ - int retval = 0; - - /* Set up out_urb */ - memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); - ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); - - ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; - ati_remote->out_urb->dev = ati_remote->udev; - ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; - - retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); - if (retval) { - dev_dbg(&ati_remote->interface->dev, - "sendpacket: usb_submit_urb failed: %d\n", retval); - return retval; - } - - wait_event_timeout(ati_remote->wait, - ((ati_remote->out_urb->status != -EINPROGRESS) || - (ati_remote->send_flags & SEND_FLAG_COMPLETE)), - HZ); - usb_kill_urb(ati_remote->out_urb); - - return retval; -} - -/* - * ati_remote_event_lookup - */ -static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) -{ - int i; - - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { - /* - * Decide if the table entry matches the remote input. - */ - if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) && - ((((ati_remote_tbl[i].data1 >> 4) - - (d1 >> 4) + rem) & 0x0f) == 0x0f) && - (ati_remote_tbl[i].data2 == d2)) - return i; - - } - return -1; -} - -/* - * ati_remote_compute_accel - * - * Implements acceleration curve for directional control pad - * If elapsed time since last event is > 1/4 second, user "stopped", - * so reset acceleration. Otherwise, user is probably holding the control - * pad down, so we increase acceleration, ramping up over two seconds to - * a maximum speed. - */ -static int ati_remote_compute_accel(struct ati_remote *ati_remote) -{ - static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; - unsigned long now = jiffies; - int acc; - - if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { - acc = 1; - ati_remote->acc_jiffies = now; - } - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) - acc = accel[0]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) - acc = accel[1]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) - acc = accel[2]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) - acc = accel[3]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) - acc = accel[4]; - else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) - acc = accel[5]; - else - acc = accel[6]; - - return acc; -} - -/* - * ati_remote_report_input - */ -static void ati_remote_input_report(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - unsigned char *data= ati_remote->inbuf; - struct input_dev *dev = ati_remote->idev; - int index, acc; - int remote_num; - - /* Deal with strange looking inputs */ - if ( (urb->actual_length != 4) || (data[0] != 0x14) || - ((data[3] & 0x0f) != 0x00) ) { - ati_remote_dump(&urb->dev->dev, data, urb->actual_length); - return; - } - - /* Mask unwanted remote channels. */ - /* note: remote_num is 0-based, channel 1 on remote == 0 here */ - remote_num = (data[3] >> 4) & 0x0f; - if (channel_mask & (1 << (remote_num + 1))) { - dbginfo(&ati_remote->interface->dev, - "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n", - remote_num, data[1], data[2], channel_mask); - return; - } - - /* Look up event code index in translation table */ - index = ati_remote_event_lookup(remote_num, data[1], data[2]); - if (index < 0) { - dev_warn(&ati_remote->interface->dev, - "Unknown input from channel 0x%02x: data %02x,%02x\n", - remote_num, data[1], data[2]); - return; - } - dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n", - remote_num, data[1], data[2], index, ati_remote_tbl[index].code); - - if (ati_remote_tbl[index].kind == KIND_LITERAL) { - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value); - input_sync(dev); - - ati_remote->old_jiffies = jiffies; - return; - } - - if (ati_remote_tbl[index].kind == KIND_FILTERED) { - unsigned long now = jiffies; - - /* Filter duplicate events which happen "too close" together. */ - if (ati_remote->old_data[0] == data[1] && - ati_remote->old_data[1] == data[2] && - time_before(now, ati_remote->old_jiffies + - msecs_to_jiffies(repeat_filter))) { - ati_remote->repeat_count++; - } else { - ati_remote->repeat_count = 0; - ati_remote->first_jiffies = now; - } - - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; - ati_remote->old_jiffies = now; - - /* Ensure we skip at least the 4 first duplicate events (generated - * by a single keypress), and continue skipping until repeat_delay - * msecs have passed - */ - if (ati_remote->repeat_count > 0 && - (ati_remote->repeat_count < 5 || - time_before(now, ati_remote->first_jiffies + - msecs_to_jiffies(repeat_delay)))) - return; - - - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, 1); - input_sync(dev); - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, 0); - input_sync(dev); - - } else { - - /* - * Other event kinds are from the directional control pad, and have an - * acceleration factor applied to them. Without this acceleration, the - * control pad is mostly unusable. - */ - acc = ati_remote_compute_accel(ati_remote); - - switch (ati_remote_tbl[index].kind) { - case KIND_ACCEL: - input_event(dev, ati_remote_tbl[index].type, - ati_remote_tbl[index].code, - ati_remote_tbl[index].value * acc); - break; - case KIND_LU: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_RU: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, -acc); - break; - case KIND_LD: - input_report_rel(dev, REL_X, -acc); - input_report_rel(dev, REL_Y, acc); - break; - case KIND_RD: - input_report_rel(dev, REL_X, acc); - input_report_rel(dev, REL_Y, acc); - break; - default: - dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", - ati_remote_tbl[index].kind); - } - input_sync(dev); - - ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; - } -} - -/* - * ati_remote_irq_in - */ -static void ati_remote_irq_in(struct urb *urb) -{ - struct ati_remote *ati_remote = urb->context; - int retval; - - switch (urb->status) { - case 0: /* success */ - ati_remote_input_report(urb); - break; - case -ECONNRESET: /* unlink */ - case -ENOENT: - case -ESHUTDOWN: - dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n", - __func__); - return; - default: /* error */ - dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", - __func__, urb->status); - } - - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n", - __func__, retval); -} - -/* - * ati_remote_alloc_buffers - */ -static int ati_remote_alloc_buffers(struct usb_device *udev, - struct ati_remote *ati_remote) -{ - ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, - &ati_remote->inbuf_dma); - if (!ati_remote->inbuf) - return -1; - - ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, - &ati_remote->outbuf_dma); - if (!ati_remote->outbuf) - return -1; - - ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->irq_urb) - return -1; - - ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!ati_remote->out_urb) - return -1; - - return 0; -} - -/* - * ati_remote_free_buffers - */ -static void ati_remote_free_buffers(struct ati_remote *ati_remote) -{ - usb_free_urb(ati_remote->irq_urb); - usb_free_urb(ati_remote->out_urb); - - usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, - ati_remote->inbuf, ati_remote->inbuf_dma); - - usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, - ati_remote->outbuf, ati_remote->outbuf_dma); -} - -static void ati_remote_input_init(struct ati_remote *ati_remote) -{ - struct input_dev *idev = ati_remote->idev; - int i; - - idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); - idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | - BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); - idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) - if (ati_remote_tbl[i].type == EV_KEY) - set_bit(ati_remote_tbl[i].code, idev->keybit); - - input_set_drvdata(idev, ati_remote); - - idev->open = ati_remote_open; - idev->close = ati_remote_close; - - idev->name = ati_remote->name; - idev->phys = ati_remote->phys; - - usb_to_input_id(ati_remote->udev, &idev->id); - idev->dev.parent = &ati_remote->udev->dev; -} - -static int ati_remote_initialize(struct ati_remote *ati_remote) -{ - struct usb_device *udev = ati_remote->udev; - int pipe, maxp; - - init_waitqueue_head(&ati_remote->wait); - - /* Set up irq_urb */ - pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - - usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, - maxp, ati_remote_irq_in, ati_remote, - ati_remote->endpoint_in->bInterval); - ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; - ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* Set up out_urb */ - pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); - maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); - maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; - - usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, - maxp, ati_remote_irq_out, ati_remote, - ati_remote->endpoint_out->bInterval); - ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; - ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - /* send initialization strings */ - if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || - (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { - dev_err(&ati_remote->interface->dev, - "Initializing ati_remote hardware failed.\n"); - return -EIO; - } - - return 0; -} - -/* - * ati_remote_probe - */ -static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct usb_host_interface *iface_host = interface->cur_altsetting; - struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; - struct ati_remote *ati_remote; - struct input_dev *input_dev; - int err = -ENOMEM; - - if (iface_host->desc.bNumEndpoints != 2) { - err("%s: Unexpected desc.bNumEndpoints\n", __func__); - return -ENODEV; - } - - endpoint_in = &iface_host->endpoint[0].desc; - endpoint_out = &iface_host->endpoint[1].desc; - - if (!usb_endpoint_is_int_in(endpoint_in)) { - err("%s: Unexpected endpoint_in\n", __func__); - return -ENODEV; - } - if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { - err("%s: endpoint_in message size==0? \n", __func__); - return -ENODEV; - } - - ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!ati_remote || !input_dev) - goto fail1; - - /* Allocate URB buffers, URBs */ - if (ati_remote_alloc_buffers(udev, ati_remote)) - goto fail2; - - ati_remote->endpoint_in = endpoint_in; - ati_remote->endpoint_out = endpoint_out; - ati_remote->udev = udev; - ati_remote->idev = input_dev; - ati_remote->interface = interface; - - usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); - strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); - - if (udev->manufacturer) - strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); - - if (udev->product) - snprintf(ati_remote->name, sizeof(ati_remote->name), - "%s %s", ati_remote->name, udev->product); - - if (!strlen(ati_remote->name)) - snprintf(ati_remote->name, sizeof(ati_remote->name), - DRIVER_DESC "(%04x,%04x)", - le16_to_cpu(ati_remote->udev->descriptor.idVendor), - le16_to_cpu(ati_remote->udev->descriptor.idProduct)); - - ati_remote_input_init(ati_remote); - - /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ - err = ati_remote_initialize(ati_remote); - if (err) - goto fail3; - - /* Set up and register input device */ - err = input_register_device(ati_remote->idev); - if (err) - goto fail3; - - usb_set_intfdata(interface, ati_remote); - return 0; - - fail3: usb_kill_urb(ati_remote->irq_urb); - usb_kill_urb(ati_remote->out_urb); - fail2: ati_remote_free_buffers(ati_remote); - fail1: input_free_device(input_dev); - kfree(ati_remote); - return err; -} - -/* - * ati_remote_disconnect - */ -static void ati_remote_disconnect(struct usb_interface *interface) -{ - struct ati_remote *ati_remote; - - ati_remote = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - if (!ati_remote) { - dev_warn(&interface->dev, "%s - null device?\n", __func__); - return; - } - - usb_kill_urb(ati_remote->irq_urb); - usb_kill_urb(ati_remote->out_urb); - input_unregister_device(ati_remote->idev); - ati_remote_free_buffers(ati_remote); - kfree(ati_remote); -} - -/* - * ati_remote_init - */ -static int __init ati_remote_init(void) -{ - int result; - - result = usb_register(&ati_remote_driver); - if (result) - printk(KERN_ERR KBUILD_MODNAME - ": usb_register error #%d\n", result); - else - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - - return result; -} - -/* - * ati_remote_exit - */ -static void __exit ati_remote_exit(void) -{ - usb_deregister(&ati_remote_driver); -} - -/* - * module specification - */ - -module_init(ati_remote_init); -module_exit(ati_remote_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 899f783d92fb..756884e007e6 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -4,8 +4,8 @@ menuconfig RC_CORE default INPUT ---help--- Enable support for Remote Controllers on Linux. This is - needed in order to support several video capture adapters. - Currently, all supported devices use InfraRed. + needed in order to support several video capture adapters, + standalone IR receivers/transmitters, and RF receivers. Enable this option if you have a video capture board even if you don't need IR, as otherwise, you may not be able to @@ -108,6 +108,22 @@ config IR_LIRC_CODEC Enable this option to pass raw IR to and from userspace via the LIRC interface. +config RC_ATI_REMOTE + tristate "ATI / X10 USB RF remote control" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use an ATI or X10 "Lola" USB remote control. + These are RF remotes with USB receivers. + The ATI remote comes with many of ATI's All-In-Wonder video cards. + The X10 "Lola" remote is available at: + + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. + config IR_ENE tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" depends on PNP diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index f224db027c41..2156e786b557 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o # stand-alone IR receivers/transmitters +obj-$(CONFIG_RC_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_IR_IMON) += imon.o obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o obj-$(CONFIG_IR_MCEUSB) += mceusb.o diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c new file mode 100644 index 000000000000..53388a558a57 --- /dev/null +++ b/drivers/media/rc/ati_remote.c @@ -0,0 +1,867 @@ +/* + * USB ATI Remote support + * + * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman + * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev + * + * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including + * porting to the 2.6 kernel interfaces, along with other modification + * to better match the style of the existing usb/input drivers. However, the + * protocol and hardware handling is essentially unchanged from 2.1.1. + * + * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by + * Vojtech Pavlik. + * + * Changes: + * + * Feb 2004: Torrey Hoffman + * Version 2.2.0 + * Jun 2004: Torrey Hoffman + * Version 2.2.1 + * Added key repeat support contributed by: + * Vincent Vanackere + * Added support for the "Lola" remote contributed by: + * Seth Cohn + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * + * Hardware & software notes + * + * These remote controls are distributed by ATI as part of their + * "All-In-Wonder" video card packages. The receiver self-identifies as a + * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". + * + * The "Lola" remote is available from X10. See: + * http://www.x10.com/products/lola_sg1.htm + * The Lola is similar to the ATI remote but has no mouse support, and slightly + * different keys. + * + * It is possible to use multiple receivers and remotes on multiple computers + * simultaneously by configuring them to use specific channels. + * + * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. + * Actually, it may even support more, at least in some revisions of the + * hardware. + * + * Each remote can be configured to transmit on one channel as follows: + * - Press and hold the "hand icon" button. + * - When the red LED starts to blink, let go of the "hand icon" button. + * - When it stops blinking, input the channel code as two digits, from 01 + * to 16, and press the hand icon again. + * + * The timing can be a little tricky. Try loading the module with debug=1 + * to have the kernel print out messages about the remote control number + * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. + * + * The driver has a "channel_mask" parameter. This bitmask specifies which + * channels will be ignored by the module. To mask out channels, just add + * all the 2^channel_number values together. + * + * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote + * ignore signals coming from remote controls transmitting on channel 4, but + * accept all other channels. + * + * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be + * ignored. + * + * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this + * parameter are unused. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Module and Version Information, Module Parameters + */ + +#define ATI_REMOTE_VENDOR_ID 0x0bc7 +#define LOLA_REMOTE_PRODUCT_ID 0x0002 +#define LOLA2_REMOTE_PRODUCT_ID 0x0003 +#define ATI_REMOTE_PRODUCT_ID 0x0004 +#define NVIDIA_REMOTE_PRODUCT_ID 0x0005 +#define MEDION_REMOTE_PRODUCT_ID 0x0006 + +#define DRIVER_VERSION "2.2.1" +#define DRIVER_AUTHOR "Torrey Hoffman " +#define DRIVER_DESC "ATI/X10 RF USB Remote Control" + +#define NAME_BUFSIZE 80 /* size of product name, path buffers */ +#define DATA_BUFSIZE 63 /* size of URB data buffers */ + +/* + * Duplicate event filtering time. + * Sequential, identical KIND_FILTERED inputs with less than + * FILTER_TIME milliseconds between them are considered as repeat + * events. The hardware generates 5 events for the first keypress + * and we have to take this into account for an accurate repeat + * behaviour. + */ +#define FILTER_TIME 60 /* msec */ +#define REPEAT_DELAY 500 /* msec */ + +static unsigned long channel_mask; +module_param(channel_mask, ulong, 0644); +MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); + +static int repeat_filter = FILTER_TIME; +module_param(repeat_filter, int, 0644); +MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); + +static int repeat_delay = REPEAT_DELAY; +module_param(repeat_delay, int, 0644); +MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); + +#define dbginfo(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) +#undef err +#define err(format, arg...) printk(KERN_ERR format , ## arg) + +static struct usb_device_id ati_remote_table[] = { + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) }, + { USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ati_remote_table); + +/* Get hi and low bytes of a 16-bits int */ +#define HI(a) ((unsigned char)((a) >> 8)) +#define LO(a) ((unsigned char)((a) & 0xff)) + +#define SEND_FLAG_IN_PROGRESS 1 +#define SEND_FLAG_COMPLETE 2 + +/* Device initialization strings */ +static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; +static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; + +struct ati_remote { + struct input_dev *idev; + struct usb_device *udev; + struct usb_interface *interface; + + struct urb *irq_urb; + struct urb *out_urb; + struct usb_endpoint_descriptor *endpoint_in; + struct usb_endpoint_descriptor *endpoint_out; + unsigned char *inbuf; + unsigned char *outbuf; + dma_addr_t inbuf_dma; + dma_addr_t outbuf_dma; + + unsigned char old_data[2]; /* Detect duplicate events */ + unsigned long old_jiffies; + unsigned long acc_jiffies; /* handle acceleration */ + unsigned long first_jiffies; + + unsigned int repeat_count; + + char name[NAME_BUFSIZE]; + char phys[NAME_BUFSIZE]; + + wait_queue_head_t wait; + int send_flags; +}; + +/* "Kinds" of messages sent from the hardware to the driver. */ +#define KIND_END 0 +#define KIND_LITERAL 1 /* Simply pass to input system */ +#define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ +#define KIND_LU 3 /* Directional keypad diagonals - left up, */ +#define KIND_RU 4 /* right up, */ +#define KIND_LD 5 /* left down, */ +#define KIND_RD 6 /* right down */ +#define KIND_ACCEL 7 /* Directional keypad - left, right, up, down.*/ + +/* Translation table from hardware messages to input events. */ +static const struct { + short kind; + unsigned char data1, data2; + int type; + unsigned int code; + int value; +} ati_remote_tbl[] = { + /* Directional control pad axes */ + {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ + {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ + {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ + {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ + /* Directional control pad diagonals */ + {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ + {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ + {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ + {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ + + /* "Mouse button" buttons */ + {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ + {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ + {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ + {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ + + /* Artificial "doubleclick" events are generated by the hardware. + * They are mapped to the "side" and "extra" mouse buttons here. */ + {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ + {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ + + /* keyboard. */ + {KIND_FILTERED, 0xd2, 0x0d, EV_KEY, KEY_1, 1}, + {KIND_FILTERED, 0xd3, 0x0e, EV_KEY, KEY_2, 1}, + {KIND_FILTERED, 0xd4, 0x0f, EV_KEY, KEY_3, 1}, + {KIND_FILTERED, 0xd5, 0x10, EV_KEY, KEY_4, 1}, + {KIND_FILTERED, 0xd6, 0x11, EV_KEY, KEY_5, 1}, + {KIND_FILTERED, 0xd7, 0x12, EV_KEY, KEY_6, 1}, + {KIND_FILTERED, 0xd8, 0x13, EV_KEY, KEY_7, 1}, + {KIND_FILTERED, 0xd9, 0x14, EV_KEY, KEY_8, 1}, + {KIND_FILTERED, 0xda, 0x15, EV_KEY, KEY_9, 1}, + {KIND_FILTERED, 0xdc, 0x17, EV_KEY, KEY_0, 1}, + {KIND_FILTERED, 0xc5, 0x00, EV_KEY, KEY_A, 1}, + {KIND_FILTERED, 0xc6, 0x01, EV_KEY, KEY_B, 1}, + {KIND_FILTERED, 0xde, 0x19, EV_KEY, KEY_C, 1}, + {KIND_FILTERED, 0xe0, 0x1b, EV_KEY, KEY_D, 1}, + {KIND_FILTERED, 0xe6, 0x21, EV_KEY, KEY_E, 1}, + {KIND_FILTERED, 0xe8, 0x23, EV_KEY, KEY_F, 1}, + + /* "special" keys */ + {KIND_FILTERED, 0xdd, 0x18, EV_KEY, KEY_KPENTER, 1}, /* "check" */ + {KIND_FILTERED, 0xdb, 0x16, EV_KEY, KEY_MENU, 1}, /* "menu" */ + {KIND_FILTERED, 0xc7, 0x02, EV_KEY, KEY_POWER, 1}, /* Power */ + {KIND_FILTERED, 0xc8, 0x03, EV_KEY, KEY_TV, 1}, /* TV */ + {KIND_FILTERED, 0xc9, 0x04, EV_KEY, KEY_DVD, 1}, /* DVD */ + {KIND_FILTERED, 0xca, 0x05, EV_KEY, KEY_WWW, 1}, /* WEB */ + {KIND_FILTERED, 0xcb, 0x06, EV_KEY, KEY_BOOKMARKS, 1}, /* "book" */ + {KIND_FILTERED, 0xcc, 0x07, EV_KEY, KEY_EDIT, 1}, /* "hand" */ + {KIND_FILTERED, 0xe1, 0x1c, EV_KEY, KEY_COFFEE, 1}, /* "timer" */ + {KIND_FILTERED, 0xe5, 0x20, EV_KEY, KEY_FRONT, 1}, /* "max" */ + {KIND_FILTERED, 0xe2, 0x1d, EV_KEY, KEY_LEFT, 1}, /* left */ + {KIND_FILTERED, 0xe4, 0x1f, EV_KEY, KEY_RIGHT, 1}, /* right */ + {KIND_FILTERED, 0xe7, 0x22, EV_KEY, KEY_DOWN, 1}, /* down */ + {KIND_FILTERED, 0xdf, 0x1a, EV_KEY, KEY_UP, 1}, /* up */ + {KIND_FILTERED, 0xe3, 0x1e, EV_KEY, KEY_OK, 1}, /* "OK" */ + {KIND_FILTERED, 0xce, 0x09, EV_KEY, KEY_VOLUMEDOWN, 1}, /* VOL + */ + {KIND_FILTERED, 0xcd, 0x08, EV_KEY, KEY_VOLUMEUP, 1}, /* VOL - */ + {KIND_FILTERED, 0xcf, 0x0a, EV_KEY, KEY_MUTE, 1}, /* MUTE */ + {KIND_FILTERED, 0xd0, 0x0b, EV_KEY, KEY_CHANNELUP, 1}, /* CH + */ + {KIND_FILTERED, 0xd1, 0x0c, EV_KEY, KEY_CHANNELDOWN, 1},/* CH - */ + {KIND_FILTERED, 0xec, 0x27, EV_KEY, KEY_RECORD, 1}, /* ( o) red */ + {KIND_FILTERED, 0xea, 0x25, EV_KEY, KEY_PLAY, 1}, /* ( >) */ + {KIND_FILTERED, 0xe9, 0x24, EV_KEY, KEY_REWIND, 1}, /* (<<) */ + {KIND_FILTERED, 0xeb, 0x26, EV_KEY, KEY_FORWARD, 1}, /* (>>) */ + {KIND_FILTERED, 0xed, 0x28, EV_KEY, KEY_STOP, 1}, /* ([]) */ + {KIND_FILTERED, 0xee, 0x29, EV_KEY, KEY_PAUSE, 1}, /* ('') */ + {KIND_FILTERED, 0xf0, 0x2b, EV_KEY, KEY_PREVIOUS, 1}, /* (<-) */ + {KIND_FILTERED, 0xef, 0x2a, EV_KEY, KEY_NEXT, 1}, /* (>+) */ + {KIND_FILTERED, 0xf2, 0x2D, EV_KEY, KEY_INFO, 1}, /* PLAYING */ + {KIND_FILTERED, 0xf3, 0x2E, EV_KEY, KEY_HOME, 1}, /* TOP */ + {KIND_FILTERED, 0xf4, 0x2F, EV_KEY, KEY_END, 1}, /* END */ + {KIND_FILTERED, 0xf5, 0x30, EV_KEY, KEY_SELECT, 1}, /* SELECT */ + + {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} +}; + +/* Local function prototypes */ +static int ati_remote_open (struct input_dev *inputdev); +static void ati_remote_close (struct input_dev *inputdev); +static int ati_remote_sendpacket (struct ati_remote *ati_remote, u16 cmd, unsigned char *data); +static void ati_remote_irq_out (struct urb *urb); +static void ati_remote_irq_in (struct urb *urb); +static void ati_remote_input_report (struct urb *urb); +static int ati_remote_initialize (struct ati_remote *ati_remote); +static int ati_remote_probe (struct usb_interface *interface, const struct usb_device_id *id); +static void ati_remote_disconnect (struct usb_interface *interface); + +/* usb specific object to register with the usb subsystem */ +static struct usb_driver ati_remote_driver = { + .name = "ati_remote", + .probe = ati_remote_probe, + .disconnect = ati_remote_disconnect, + .id_table = ati_remote_table, +}; + +/* + * ati_remote_dump_input + */ +static void ati_remote_dump(struct device *dev, unsigned char *data, + unsigned int len) +{ + if ((len == 1) && (data[0] != (unsigned char)0xff) && (data[0] != 0x00)) + dev_warn(dev, "Weird byte 0x%02x\n", data[0]); + else if (len == 4) + dev_warn(dev, "Weird key %02x %02x %02x %02x\n", + data[0], data[1], data[2], data[3]); + else + dev_warn(dev, "Weird data, len=%d %02x %02x %02x %02x %02x %02x ...\n", + len, data[0], data[1], data[2], data[3], data[4], data[5]); +} + +/* + * ati_remote_open + */ +static int ati_remote_open(struct input_dev *inputdev) +{ + struct ati_remote *ati_remote = input_get_drvdata(inputdev); + + /* On first open, submit the read urb which was set up previously. */ + ati_remote->irq_urb->dev = ati_remote->udev; + if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { + dev_err(&ati_remote->interface->dev, + "%s: usb_submit_urb failed!\n", __func__); + return -EIO; + } + + return 0; +} + +/* + * ati_remote_close + */ +static void ati_remote_close(struct input_dev *inputdev) +{ + struct ati_remote *ati_remote = input_get_drvdata(inputdev); + + usb_kill_urb(ati_remote->irq_urb); +} + +/* + * ati_remote_irq_out + */ +static void ati_remote_irq_out(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + + if (urb->status) { + dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", + __func__, urb->status); + return; + } + + ati_remote->send_flags |= SEND_FLAG_COMPLETE; + wmb(); + wake_up(&ati_remote->wait); +} + +/* + * ati_remote_sendpacket + * + * Used to send device initialization strings + */ +static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigned char *data) +{ + int retval = 0; + + /* Set up out_urb */ + memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); + ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); + + ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; + ati_remote->out_urb->dev = ati_remote->udev; + ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; + + retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); + if (retval) { + dev_dbg(&ati_remote->interface->dev, + "sendpacket: usb_submit_urb failed: %d\n", retval); + return retval; + } + + wait_event_timeout(ati_remote->wait, + ((ati_remote->out_urb->status != -EINPROGRESS) || + (ati_remote->send_flags & SEND_FLAG_COMPLETE)), + HZ); + usb_kill_urb(ati_remote->out_urb); + + return retval; +} + +/* + * ati_remote_event_lookup + */ +static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) +{ + int i; + + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { + /* + * Decide if the table entry matches the remote input. + */ + if ((((ati_remote_tbl[i].data1 & 0x0f) == (d1 & 0x0f))) && + ((((ati_remote_tbl[i].data1 >> 4) - + (d1 >> 4) + rem) & 0x0f) == 0x0f) && + (ati_remote_tbl[i].data2 == d2)) + return i; + + } + return -1; +} + +/* + * ati_remote_compute_accel + * + * Implements acceleration curve for directional control pad + * If elapsed time since last event is > 1/4 second, user "stopped", + * so reset acceleration. Otherwise, user is probably holding the control + * pad down, so we increase acceleration, ramping up over two seconds to + * a maximum speed. + */ +static int ati_remote_compute_accel(struct ati_remote *ati_remote) +{ + static const char accel[] = { 1, 2, 4, 6, 9, 13, 20 }; + unsigned long now = jiffies; + int acc; + + if (time_after(now, ati_remote->old_jiffies + msecs_to_jiffies(250))) { + acc = 1; + ati_remote->acc_jiffies = now; + } + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(125))) + acc = accel[0]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(250))) + acc = accel[1]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(500))) + acc = accel[2]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1000))) + acc = accel[3]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(1500))) + acc = accel[4]; + else if (time_before(now, ati_remote->acc_jiffies + msecs_to_jiffies(2000))) + acc = accel[5]; + else + acc = accel[6]; + + return acc; +} + +/* + * ati_remote_report_input + */ +static void ati_remote_input_report(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + unsigned char *data= ati_remote->inbuf; + struct input_dev *dev = ati_remote->idev; + int index, acc; + int remote_num; + + /* Deal with strange looking inputs */ + if ( (urb->actual_length != 4) || (data[0] != 0x14) || + ((data[3] & 0x0f) != 0x00) ) { + ati_remote_dump(&urb->dev->dev, data, urb->actual_length); + return; + } + + /* Mask unwanted remote channels. */ + /* note: remote_num is 0-based, channel 1 on remote == 0 here */ + remote_num = (data[3] >> 4) & 0x0f; + if (channel_mask & (1 << (remote_num + 1))) { + dbginfo(&ati_remote->interface->dev, + "Masked input from channel 0x%02x: data %02x,%02x, mask= 0x%02lx\n", + remote_num, data[1], data[2], channel_mask); + return; + } + + /* Look up event code index in translation table */ + index = ati_remote_event_lookup(remote_num, data[1], data[2]); + if (index < 0) { + dev_warn(&ati_remote->interface->dev, + "Unknown input from channel 0x%02x: data %02x,%02x\n", + remote_num, data[1], data[2]); + return; + } + dbginfo(&ati_remote->interface->dev, + "channel 0x%02x; data %02x,%02x; index %d; keycode %d\n", + remote_num, data[1], data[2], index, ati_remote_tbl[index].code); + + if (ati_remote_tbl[index].kind == KIND_LITERAL) { + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value); + input_sync(dev); + + ati_remote->old_jiffies = jiffies; + return; + } + + if (ati_remote_tbl[index].kind == KIND_FILTERED) { + unsigned long now = jiffies; + + /* Filter duplicate events which happen "too close" together. */ + if (ati_remote->old_data[0] == data[1] && + ati_remote->old_data[1] == data[2] && + time_before(now, ati_remote->old_jiffies + + msecs_to_jiffies(repeat_filter))) { + ati_remote->repeat_count++; + } else { + ati_remote->repeat_count = 0; + ati_remote->first_jiffies = now; + } + + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + ati_remote->old_jiffies = now; + + /* Ensure we skip at least the 4 first duplicate events (generated + * by a single keypress), and continue skipping until repeat_delay + * msecs have passed + */ + if (ati_remote->repeat_count > 0 && + (ati_remote->repeat_count < 5 || + time_before(now, ati_remote->first_jiffies + + msecs_to_jiffies(repeat_delay)))) + return; + + + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, 1); + input_sync(dev); + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, 0); + input_sync(dev); + + } else { + + /* + * Other event kinds are from the directional control pad, and have an + * acceleration factor applied to them. Without this acceleration, the + * control pad is mostly unusable. + */ + acc = ati_remote_compute_accel(ati_remote); + + switch (ati_remote_tbl[index].kind) { + case KIND_ACCEL: + input_event(dev, ati_remote_tbl[index].type, + ati_remote_tbl[index].code, + ati_remote_tbl[index].value * acc); + break; + case KIND_LU: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_RU: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, -acc); + break; + case KIND_LD: + input_report_rel(dev, REL_X, -acc); + input_report_rel(dev, REL_Y, acc); + break; + case KIND_RD: + input_report_rel(dev, REL_X, acc); + input_report_rel(dev, REL_Y, acc); + break; + default: + dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", + ati_remote_tbl[index].kind); + } + input_sync(dev); + + ati_remote->old_jiffies = jiffies; + ati_remote->old_data[0] = data[1]; + ati_remote->old_data[1] = data[2]; + } +} + +/* + * ati_remote_irq_in + */ +static void ati_remote_irq_in(struct urb *urb) +{ + struct ati_remote *ati_remote = urb->context; + int retval; + + switch (urb->status) { + case 0: /* success */ + ati_remote_input_report(urb); + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n", + __func__); + return; + default: /* error */ + dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n", + __func__, urb->status); + } + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n", + __func__, retval); +} + +/* + * ati_remote_alloc_buffers + */ +static int ati_remote_alloc_buffers(struct usb_device *udev, + struct ati_remote *ati_remote) +{ + ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, + &ati_remote->inbuf_dma); + if (!ati_remote->inbuf) + return -1; + + ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, + &ati_remote->outbuf_dma); + if (!ati_remote->outbuf) + return -1; + + ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->irq_urb) + return -1; + + ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!ati_remote->out_urb) + return -1; + + return 0; +} + +/* + * ati_remote_free_buffers + */ +static void ati_remote_free_buffers(struct ati_remote *ati_remote) +{ + usb_free_urb(ati_remote->irq_urb); + usb_free_urb(ati_remote->out_urb); + + usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, + ati_remote->inbuf, ati_remote->inbuf_dma); + + usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, + ati_remote->outbuf, ati_remote->outbuf_dma); +} + +static void ati_remote_input_init(struct ati_remote *ati_remote) +{ + struct input_dev *idev = ati_remote->idev; + int i; + + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); + idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) + if (ati_remote_tbl[i].type == EV_KEY) + set_bit(ati_remote_tbl[i].code, idev->keybit); + + input_set_drvdata(idev, ati_remote); + + idev->open = ati_remote_open; + idev->close = ati_remote_close; + + idev->name = ati_remote->name; + idev->phys = ati_remote->phys; + + usb_to_input_id(ati_remote->udev, &idev->id); + idev->dev.parent = &ati_remote->udev->dev; +} + +static int ati_remote_initialize(struct ati_remote *ati_remote) +{ + struct usb_device *udev = ati_remote->udev; + int pipe, maxp; + + init_waitqueue_head(&ati_remote->wait); + + /* Set up irq_urb */ + pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; + + usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, + maxp, ati_remote_irq_in, ati_remote, + ati_remote->endpoint_in->bInterval); + ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; + ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* Set up out_urb */ + pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; + + usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, + maxp, ati_remote_irq_out, ati_remote, + ati_remote->endpoint_out->bInterval); + ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; + ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* send initialization strings */ + if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || + (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { + dev_err(&ati_remote->interface->dev, + "Initializing ati_remote hardware failed.\n"); + return -EIO; + } + + return 0; +} + +/* + * ati_remote_probe + */ +static int ati_remote_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct usb_host_interface *iface_host = interface->cur_altsetting; + struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; + struct ati_remote *ati_remote; + struct input_dev *input_dev; + int err = -ENOMEM; + + if (iface_host->desc.bNumEndpoints != 2) { + err("%s: Unexpected desc.bNumEndpoints\n", __func__); + return -ENODEV; + } + + endpoint_in = &iface_host->endpoint[0].desc; + endpoint_out = &iface_host->endpoint[1].desc; + + if (!usb_endpoint_is_int_in(endpoint_in)) { + err("%s: Unexpected endpoint_in\n", __func__); + return -ENODEV; + } + if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { + err("%s: endpoint_in message size==0? \n", __func__); + return -ENODEV; + } + + ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ati_remote || !input_dev) + goto fail1; + + /* Allocate URB buffers, URBs */ + if (ati_remote_alloc_buffers(udev, ati_remote)) + goto fail2; + + ati_remote->endpoint_in = endpoint_in; + ati_remote->endpoint_out = endpoint_out; + ati_remote->udev = udev; + ati_remote->idev = input_dev; + ati_remote->interface = interface; + + usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys)); + strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys)); + + if (udev->manufacturer) + strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name)); + + if (udev->product) + snprintf(ati_remote->name, sizeof(ati_remote->name), + "%s %s", ati_remote->name, udev->product); + + if (!strlen(ati_remote->name)) + snprintf(ati_remote->name, sizeof(ati_remote->name), + DRIVER_DESC "(%04x,%04x)", + le16_to_cpu(ati_remote->udev->descriptor.idVendor), + le16_to_cpu(ati_remote->udev->descriptor.idProduct)); + + ati_remote_input_init(ati_remote); + + /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ + err = ati_remote_initialize(ati_remote); + if (err) + goto fail3; + + /* Set up and register input device */ + err = input_register_device(ati_remote->idev); + if (err) + goto fail3; + + usb_set_intfdata(interface, ati_remote); + return 0; + + fail3: usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + fail2: ati_remote_free_buffers(ati_remote); + fail1: input_free_device(input_dev); + kfree(ati_remote); + return err; +} + +/* + * ati_remote_disconnect + */ +static void ati_remote_disconnect(struct usb_interface *interface) +{ + struct ati_remote *ati_remote; + + ati_remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + if (!ati_remote) { + dev_warn(&interface->dev, "%s - null device?\n", __func__); + return; + } + + usb_kill_urb(ati_remote->irq_urb); + usb_kill_urb(ati_remote->out_urb); + input_unregister_device(ati_remote->idev); + ati_remote_free_buffers(ati_remote); + kfree(ati_remote); +} + +/* + * ati_remote_init + */ +static int __init ati_remote_init(void) +{ + int result; + + result = usb_register(&ati_remote_driver); + if (result) + printk(KERN_ERR KBUILD_MODNAME + ": usb_register error #%d\n", result); + else + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + + return result; +} + +/* + * ati_remote_exit + */ +static void __exit ati_remote_exit(void) +{ + usb_deregister(&ati_remote_driver); +} + +/* + * module specification + */ + +module_init(ati_remote_init); +module_exit(ati_remote_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 395cf9691d72173d8cdaa613c5f0255f993af94b Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 15 Aug 2011 02:02:26 +0200 Subject: doc: fix broken references There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- Documentation/PCI/pci.txt | 2 +- Documentation/blackfin/bfin-gpio-notes.txt | 2 +- Documentation/block/biodoc.txt | 2 +- Documentation/bus-virt-phys-mapping.txt | 2 +- Documentation/cdrom/packet-writing.txt | 2 +- Documentation/development-process/4.Coding | 2 +- Documentation/devicetree/bindings/gpio/led.txt | 2 +- Documentation/filesystems/caching/object.txt | 6 +++--- Documentation/filesystems/locks.txt | 11 ++++++----- Documentation/filesystems/nfs/idmapper.txt | 2 +- Documentation/filesystems/pohmelfs/design_notes.txt | 5 +++-- Documentation/filesystems/proc.txt | 2 +- Documentation/filesystems/vfs.txt | 3 --- Documentation/frv/booting.txt | 6 ------ Documentation/input/input.txt | 2 +- Documentation/kernel-docs.txt | 4 ++-- Documentation/kernel-parameters.txt | 12 ++++++------ Documentation/laptops/thinkpad-acpi.txt | 4 ++-- Documentation/media-framework.txt | 4 ++-- Documentation/memory-barriers.txt | 2 +- Documentation/networking/scaling.txt | 2 +- Documentation/power/basic-pm-debugging.txt | 2 +- Documentation/power/userland-swsusp.txt | 3 ++- Documentation/rfkill.txt | 3 +-- Documentation/scsi/aic7xxx_old.txt | 2 +- Documentation/scsi/scsi_mid_low_api.txt | 5 ----- Documentation/security/keys-trusted-encrypted.txt | 3 ++- Documentation/sound/oss/PAS16 | 3 +-- Documentation/spi/pxa2xx | 4 ++-- Documentation/timers/highres.txt | 2 +- Documentation/usb/dma.txt | 6 +++--- Documentation/virtual/lguest/lguest.c | 2 +- Documentation/vm/numa | 4 ++-- Documentation/vm/slub.txt | 2 +- arch/alpha/kernel/srm_env.c | 5 ++--- arch/arm/Kconfig | 2 +- arch/arm/include/asm/io.h | 2 +- arch/arm/mach-pxa/xcep.c | 3 +-- arch/ia64/hp/common/sba_iommu.c | 12 ++++++------ arch/m68k/q40/README | 2 +- arch/microblaze/include/asm/dma-mapping.h | 2 +- arch/mips/include/asm/lasat/lasat.h | 6 ++---- arch/mn10300/Kconfig | 2 +- arch/mn10300/kernel/irq.c | 1 - arch/openrisc/Kconfig | 2 +- arch/openrisc/include/asm/dma-mapping.h | 2 +- arch/parisc/include/asm/dma-mapping.h | 2 +- arch/parisc/kernel/pci-dma.c | 2 +- arch/powerpc/include/asm/qe.h | 2 +- arch/powerpc/sysdev/qe_lib/qe.c | 2 +- arch/unicore32/include/asm/io.h | 2 +- arch/x86/Kconfig | 2 +- arch/x86/Kconfig.debug | 2 +- arch/x86/boot/header.S | 2 +- arch/x86/include/asm/dma-mapping.h | 2 +- arch/x86/kernel/amd_gart_64.c | 2 +- arch/x86/kernel/apm_32.c | 2 -- arch/x86/kernel/pci-dma.c | 4 ++-- drivers/char/apm-emulation.c | 5 +---- drivers/input/misc/rotary_encoder.c | 2 +- drivers/leds/Kconfig | 2 +- drivers/media/dvb/dvb-usb/af9005-remote.c | 2 +- drivers/media/dvb/dvb-usb/af9005.c | 2 +- drivers/media/dvb/frontends/dib3000.h | 2 +- drivers/media/dvb/frontends/dib3000mb.c | 2 +- drivers/mtd/Kconfig | 2 +- drivers/net/Kconfig | 3 +-- drivers/net/can/sja1000/sja1000_of_platform.c | 2 +- drivers/net/tulip/21142.c | 3 --- drivers/net/tulip/eeprom.c | 2 -- drivers/net/tulip/interrupt.c | 3 --- drivers/net/tulip/media.c | 3 --- drivers/net/tulip/pnic.c | 3 --- drivers/net/tulip/pnic2.c | 3 --- drivers/net/tulip/timer.c | 3 --- drivers/net/tulip/tulip.h | 3 --- drivers/net/tulip/tulip_core.c | 3 --- drivers/parisc/sba_iommu.c | 16 ++++++++-------- drivers/platform/x86/Kconfig | 5 +---- drivers/scsi/megaraid/megaraid_mbox.c | 2 +- drivers/staging/cxt1e1/Kconfig | 3 +-- drivers/usb/serial/digi_acceleport.c | 2 +- drivers/video/igafb.c | 2 +- drivers/watchdog/smsc37b787_wdt.c | 2 +- fs/configfs/inode.c | 3 ++- fs/configfs/item.c | 2 +- fs/locks.c | 2 +- fs/squashfs/Kconfig | 6 +++--- include/linux/io-mapping.h | 2 +- include/linux/isdn.h | 2 +- include/linux/platform_data/ntc_thermistor.h | 2 +- include/media/videobuf-dma-sg.h | 2 +- include/target/configfs_macros.h | 4 ++-- net/netfilter/Kconfig | 2 +- sound/oss/Kconfig | 4 +--- tools/perf/util/config.c | 4 ++-- 96 files changed, 125 insertions(+), 179 deletions(-) (limited to 'drivers/input') diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt index 6148d4080f88..aa09e5476bba 100644 --- a/Documentation/PCI/pci.txt +++ b/Documentation/PCI/pci.txt @@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure as the PCI "bus address" might have been remapped to a "host physical" address by the arch/chip-set specific kernel support. -See Documentation/IO-mapping.txt for how to access device registers +See Documentation/io-mapping.txt for how to access device registers or device memory. The device driver needs to call pci_request_region() to verify diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt index f731c1e56475..d36b01f778b9 100644 --- a/Documentation/blackfin/bfin-gpio-notes.txt +++ b/Documentation/blackfin/bfin-gpio-notes.txt @@ -1,5 +1,5 @@ /* - * File: Documentation/blackfin/bfin-gpio-note.txt + * File: Documentation/blackfin/bfin-gpio-notes.txt * Based on: * Author: * diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index c6d84cfd2f56..e418dc0a7086 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion +Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI. diff --git a/Documentation/bus-virt-phys-mapping.txt b/Documentation/bus-virt-phys-mapping.txt index 1b5aa10df845..2bc55ff3b4d1 100644 --- a/Documentation/bus-virt-phys-mapping.txt +++ b/Documentation/bus-virt-phys-mapping.txt @@ -1,6 +1,6 @@ [ NOTE: The virt_to_bus() and bus_to_virt() functions have been superseded by the functionality provided by the PCI DMA interface - (see Documentation/PCI/PCI-DMA-mapping.txt). They continue + (see Documentation/DMA-API-HOWTO.txt). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12 ] diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt index 13c251d5add6..2834170d821e 100644 --- a/Documentation/cdrom/packet-writing.txt +++ b/Documentation/cdrom/packet-writing.txt @@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd ) For a description of the sysfs interface look into the file: - Documentation/ABI/testing/sysfs-block-pktcdvd + Documentation/ABI/testing/sysfs-class-pktcdvd Using the pktcdvd debugfs interface diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding index 83f5f5b365a3..e3cb6a56653a 100644 --- a/Documentation/development-process/4.Coding +++ b/Documentation/development-process/4.Coding @@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to fail; these failures can be restricted to a specific range of code. Running with fault injection enabled allows the programmer to see how the code responds when things go badly. See -Documentation/fault-injection/fault-injection.text for more information on +Documentation/fault-injection/fault-injection.txt for more information on how to use this facility. Other kinds of errors can be found with the "sparse" static analysis tool. diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 064db928c3c1..141087cf3107 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "Specifying GPIO information - for devices" in Documentation/powerpc/booting-without-of.txt. Active + for devices" in Documentation/devicetree/booting-without-of.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). diff --git a/Documentation/filesystems/caching/object.txt b/Documentation/filesystems/caching/object.txt index e8b0a35d8fe5..58313348da87 100644 --- a/Documentation/filesystems/caching/object.txt +++ b/Documentation/filesystems/caching/object.txt @@ -127,9 +127,9 @@ fscache_enqueue_object()). PROVISION OF CPU TIME --------------------- -The work to be done by the various states is given CPU time by the threads of -the slow work facility (see Documentation/slow-work.txt). This is used in -preference to the workqueue facility because: +The work to be done by the various states was given CPU time by the threads of +the slow work facility. This was used in preference to the workqueue facility +because: (1) Threads may be completely occupied for very long periods of time by a particular work item. These state actions may be doing sequences of diff --git a/Documentation/filesystems/locks.txt b/Documentation/filesystems/locks.txt index fab857accbd6..2cf81082581d 100644 --- a/Documentation/filesystems/locks.txt +++ b/Documentation/filesystems/locks.txt @@ -53,11 +53,12 @@ fcntl(), with all the problems that implies. 1.3 Mandatory Locking As A Mount Option --------------------------------------- -Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt' -was prior to this release a general configuration option that was valid for -all mounted filesystems. This had a number of inherent dangers, not the -least of which was the ability to freeze an NFS server by asking it to read -a file for which a mandatory lock existed. +Mandatory locking, as described in +'Documentation/filesystems/mandatory-locking.txt' was prior to this release a +general configuration option that was valid for all mounted filesystems. This +had a number of inherent dangers, not the least of which was the ability to +freeze an NFS server by asking it to read a file for which a mandatory lock +existed. From this release of the kernel, mandatory locking can be turned on and off on a per-filesystem basis, using the mount options 'mand' and 'nomand'. diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt index 9c8fd6148656..120fd3cf7fd9 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/filesystems/nfs/idmapper.txt @@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program. In this case, /some/other/program will handle all uid lookups and /usr/sbin/nfs.idmap will handle gid, user, and group lookups. -See for more information +See for more information about the request-key function. diff --git a/Documentation/filesystems/pohmelfs/design_notes.txt b/Documentation/filesystems/pohmelfs/design_notes.txt index dcf833587162..8aef91335701 100644 --- a/Documentation/filesystems/pohmelfs/design_notes.txt +++ b/Documentation/filesystems/pohmelfs/design_notes.txt @@ -58,8 +58,9 @@ data transfers. POHMELFS clients operate with a working set of servers and are capable of balancing read-only operations (like lookups or directory listings) between them according to IO priorities. Administrators can add or remove servers from the set at run-time via special commands (described -in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected -with write permission turned on. IO priority and permissions can be changed in run-time. +in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which +are connected with write permission turned on. IO priority and permissions can be changed in +run-time. POHMELFS is capable of full data channel encryption and/or strong crypto hashing. One can select any kernel supported cipher, encryption mode, hash type and operation mode diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index db3b1aba32a3..0ec91f03422e 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation. This chapter is heavily based on the documentation included in the pre 2.2 kernels, and became part of it in version 2.2.1 of the Linux kernel. -Please see: Documentation/sysctls/ directory for descriptions of these +Please see: Documentation/sysctl/ directory for descriptions of these entries. ------------------------------------------------------------------------------ diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 52d8fb81cfff..43cbd0821721 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -1053,9 +1053,6 @@ manipulate dentries: and the dentry is returned. The caller must use dput() to free the dentry when it finishes using it. -For further information on dentry locking, please refer to the document -Documentation/filesystems/dentry-locking.txt. - Mount Options ============= diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt index 37c4d84a0e57..9bdf4b46e741 100644 --- a/Documentation/frv/booting.txt +++ b/Documentation/frv/booting.txt @@ -180,9 +180,3 @@ separated by spaces: This tells the kernel what program to run initially. By default this is /sbin/init, but /sbin/sash or /bin/sh are common alternatives. - - (*) vdc=... - - This option configures the MB93493 companion chip visual display - driver. Please see Documentation/frv/mb93493/vdc.txt for more - information. diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index b93c08442e3c..b3d6787b4fb1 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -111,7 +111,7 @@ LCDs and many other purposes. The monitor and speaker controls should be easy to add to the hid/input interface, but for the UPSs and LCDs it doesn't make much sense. For this, -the hiddev interface was designed. See Documentation/usb/hiddev.txt +the hiddev interface was designed. See Documentation/hid/hiddev.txt for more information about it. The usage of the usbhid module is very simple, it takes no parameters, diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 0e0734b509d8..eda1eb1451a0 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -300,7 +300,7 @@ * Title: "The Kernel Hacking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-hacking/ + Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: HOWTO, kernel contexts, deadlock, locking, modules, symbols, return conventions. @@ -351,7 +351,7 @@ * Title: "Linux Kernel Locking HOWTO" Author: Various Talented People, and Rusty. - Location: in kernel tree, Documentation/DocBook/kernel-locking/ + Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl (must be built as "make {htmldocs | psdocs | pdfdocs}) Keywords: locks, locking, spinlock, semaphore, atomic, race condition, bottom halves, tasklets, softirqs. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 854ed5ca7e3f..be9370c764c8 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -163,7 +163,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rsdt -- prefer RSDT over (default) XSDT copy_dsdt -- copy DSDT to memory - See also Documentation/power/pm.txt, pci=noacpi + See also Documentation/power/runtime_pm.txt, pci=noacpi acpi_rsdp= [ACPI,EFI,KEXEC] Pass the RSDP address to the kernel, mostly used @@ -319,7 +319,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: , - See also Documentation/kernel/input/joystick.txt + See also Documentation/input/joystick.txt analog.map= [HW,JOY] Analog joystick and gamepad support Specifies type or capabilities of an analog joystick @@ -408,7 +408,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. bttv.radio= Most important insmod options are available as kernel args too. bttv.pll= See Documentation/video4linux/bttv/Insmod-options - bttv.tuner= and Documentation/video4linux/bttv/CARDLIST + bttv.tuner= bulk_remove=off [PPC] This parameter disables the use of the pSeries firmware feature for flushing multiple hpte entries @@ -724,7 +724,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. elevator= [IOSCHED] Format: {"cfq" | "deadline" | "noop"} - See Documentation/block/as-iosched.txt and + See Documentation/block/cfq-iosched.txt and Documentation/block/deadline-iosched.txt for details. elfcorehdr= [IA-64,PPC,SH,X86] @@ -765,7 +765,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. fail_make_request=[KNL] General fault injection mechanism. Format: ,,, - See also /Documentation/fault-injection/. + See also Documentation/fault-injection/. floppy= [HW] See Documentation/blockdev/floppy.txt. @@ -2375,7 +2375,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Format: sonypi.*= [HW] Sony Programmable I/O Control Device driver - See Documentation/sonypi.txt + See Documentation/laptops/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter See Documentation/serial/specialix.txt. diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 61815483efa3..3ff0dad62d36 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -736,7 +736,7 @@ status as "unknown". The available commands are: sysfs notes: The ThinkLight sysfs interface is documented by the LED class -documentation, in Documentation/leds-class.txt. The ThinkLight LED name +documentation, in Documentation/leds/leds-class.txt. The ThinkLight LED name is "tpacpi::thinklight". Due to limitations in the sysfs LED class, if the status of the ThinkLight @@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink. sysfs notes: The ThinkPad LED sysfs interface is described in detail by the LED class -documentation, in Documentation/leds-class.txt. +documentation, in Documentation/leds/leds-class.txt. The LEDs are named (in LED ID order, from 0 to 12): "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", diff --git a/Documentation/media-framework.txt b/Documentation/media-framework.txt index 669b5fb03a86..3a0f879533ce 100644 --- a/Documentation/media-framework.txt +++ b/Documentation/media-framework.txt @@ -9,8 +9,8 @@ Introduction ------------ The media controller API is documented in DocBook format in -Documentation/DocBook/v4l/media-controller.xml. This document will focus on -the kernel-side implementation of the media framework. +Documentation/DocBook/media/v4l/media-controller.xml. This document will focus +on the kernel-side implementation of the media framework. Abstract media device model diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index f0d3a8026a56..2759f7c188f0 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee: [*] For information on bus mastering DMA and coherency please read: Documentation/PCI/pci.txt - Documentation/PCI/PCI-DMA-mapping.txt + Documentation/DMA-API-HOWTO.txt Documentation/DMA-API.txt diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt index 58fd7414e6c0..729985ed05bd 100644 --- a/Documentation/networking/scaling.txt +++ b/Documentation/networking/scaling.txt @@ -73,7 +73,7 @@ of queues to IRQs can be determined from /proc/interrupts. By default, an IRQ may be handled on any CPU. Because a non-negligible part of packet processing takes place in receive interrupt handling, it is advantageous to spread receive interrupts between CPUs. To manually adjust the IRQ -affinity of each interrupt see Documentation/IRQ-affinity. Some systems +affinity of each interrupt see Documentation/IRQ-affinity.txt. Some systems will be running irqbalance, a daemon that dynamically optimizes IRQ assignments and as a result may override any manual settings. diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index ddd78172ef73..05a7fe76232d 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -173,7 +173,7 @@ kernel messages using the serial console. This may provide you with some information about the reasons of the suspend (resume) failure. Alternatively, it may be possible to use a FireWire port for debugging with firescope (ftp://ftp.firstfloor.org/pub/ak/firescope/). On x86 it is also possible to -use the PM_TRACE mechanism documented in Documentation/s2ram.txt . +use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . 2. Testing suspend to RAM (STR) diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt index 1101bee4e822..0e870825c1b9 100644 --- a/Documentation/power/userland-swsusp.txt +++ b/Documentation/power/userland-swsusp.txt @@ -77,7 +77,8 @@ SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in resume_swap_area, as defined in kernel/power/suspend_ioctls.h, containing the resume device specification and the offset); for swap partitions the offset is always 0, but it is different from zero for - swap files (see Documentation/swsusp-and-swap-files.txt for details). + swap files (see Documentation/power/swsusp-and-swap-files.txt for + details). SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support, depending on the argument value (enable, if the argument is nonzero) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 83668e5dd17f..03c9d9299c6b 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -117,5 +117,4 @@ The contents of these variables corresponds to the "name", "state" and "type" sysfs files explained above. -For further details consult Documentation/ABI/stable/dev-rfkill and -Documentation/ABI/stable/sysfs-class-rfkill. +For further details consult Documentation/ABI/stable/sysfs-class-rfkill. diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt index 7bd210ab45a1..ecfc474f36a8 100644 --- a/Documentation/scsi/aic7xxx_old.txt +++ b/Documentation/scsi/aic7xxx_old.txt @@ -444,7 +444,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD Kernel Compile options ------------------------------ The various kernel compile time options for this driver are now fairly - well documented in the file Documentation/Configure.help. In order to + well documented in the file drivers/scsi/Kconfig. In order to see this documentation, you need to use one of the advanced configuration programs (menuconfig and xconfig). If you are using the "make menuconfig" method of configuring your kernel, then you would simply highlight the diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt index 5f17d29c59b5..a340b18cd4eb 100644 --- a/Documentation/scsi/scsi_mid_low_api.txt +++ b/Documentation/scsi/scsi_mid_low_api.txt @@ -55,11 +55,6 @@ or in the same directory as the C source code. For example to find a url about the USB mass storage driver see the /usr/src/linux/drivers/usb/storage directory. -The Linux kernel source Documentation/DocBook/scsidrivers.tmpl file -refers to this file. With the appropriate DocBook tool-set, this permits -users to generate html, ps and pdf renderings of information within this -file (e.g. the interface functions). - Driver structure ================ Traditionally an LLD for the SCSI subsystem has been at least two files in diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt index 5f50ccabfc8a..c9e4855ed3d7 100644 --- a/Documentation/security/keys-trusted-encrypted.txt +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -156,4 +156,5 @@ Load an encrypted key "evm" from saved blob: Other uses for trusted and encrypted keys, such as for disk and file encryption are anticipated. In particular the new format 'ecryptfs' has been defined in in order to use encrypted keys to mount an eCryptfs filesystem. More details -about the usage can be found in the file 'Documentation/keys-ecryptfs.txt'. +about the usage can be found in the file +'Documentation/security/keys-ecryptfs.txt'. diff --git a/Documentation/sound/oss/PAS16 b/Documentation/sound/oss/PAS16 index 951b3dce51b4..3dca4b75988e 100644 --- a/Documentation/sound/oss/PAS16 +++ b/Documentation/sound/oss/PAS16 @@ -60,8 +60,7 @@ With PAS16 you can use two audio device files at the same time. /dev/dsp (and The new stuff for 2.3.99 and later ============================================================================ -The following configuration options from Documentation/Configure.help -are relevant to configuring the PAS16: +The following configuration options are relevant to configuring the PAS16: Sound card support CONFIG_SOUND diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 00511e08db78..3352f97430e4 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -2,7 +2,7 @@ PXA2xx SPI on SSP driver HOWTO =================================================== This a mini howto on the pxa2xx_spi driver. The driver turns a PXA2xx synchronous serial port into a SPI master controller -(see Documentation/spi/spi_summary). The driver has the following features +(see Documentation/spi/spi-summary). The driver has the following features - Support for any PXA2xx SSP - SSP PIO and SSP DMA data transfers. @@ -85,7 +85,7 @@ Declaring Slave Devices ----------------------- Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c using the "spi_board_info" structure found in "linux/spi/spi.h". See -"Documentation/spi/spi_summary" for additional information. +"Documentation/spi/spi-summary" for additional information. Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index 21332233cef1..e8789976e77c 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -30,7 +30,7 @@ hrtimer base infrastructure --------------------------- The hrtimer base infrastructure was merged into the 2.6.16 kernel. Details of -the base implementation are covered in Documentation/hrtimers/hrtimer.txt. See +the base implementation are covered in Documentation/timers/hrtimers.txt. See also figure #2 (OLS slides p. 15) The main differences to the timer wheel, which holds the armed timer_list type diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index 84ef865237db..444651e70d95 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -7,7 +7,7 @@ API OVERVIEW The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -Documentation/PCI/PCI-DMA-mapping.txt). That's how they've worked through +Documentation/DMA-API-HOWTO.txt). That's how they've worked through the 2.4 (and earlier) kernels. OR: they can now be DMA-aware. @@ -57,7 +57,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - Documentation/PCI/PCI-DMA-mapping.txt for definitions of "coherent" and + Documentation/DMA-API-HOWTO.txt for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably @@ -88,7 +88,7 @@ WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?") +of Documentation/DMA-API-HOWTO.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index d928c134dee6..c095d79cae73 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -436,7 +436,7 @@ static unsigned long load_bzimage(int fd) /* * Go back to the start of the file and read the header. It should be - * a Linux boot header (see Documentation/x86/i386/boot.txt) + * a Linux boot header (see Documentation/x86/boot.txt) */ lseek(fd, 0, SEEK_SET); read(fd, &boot, sizeof(boot)); diff --git a/Documentation/vm/numa b/Documentation/vm/numa index a200a386429d..ade01274212d 100644 --- a/Documentation/vm/numa +++ b/Documentation/vm/numa @@ -109,11 +109,11 @@ to improve NUMA locality using various CPU affinity command line interfaces, such as taskset(1) and numactl(1), and program interfaces such as sched_setaffinity(2). Further, one can modify the kernel's default local allocation behavior using Linux NUMA memory policy. -[see Documentation/vm/numa_memory_policy.] +[see Documentation/vm/numa_memory_policy.txt.] System administrators can restrict the CPUs and nodes' memories that a non- privileged user can specify in the scheduling or NUMA commands and functions -using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt] +using control groups and CPUsets. [see Documentation/cgroups/cpusets.txt] On architectures that do not hide memoryless nodes, Linux will include only zones [nodes] with memory in the zonelists. This means that for a memoryless diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 07375e73981a..f464f47bc60d 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -17,7 +17,7 @@ data and perform operation on the slabs. By default slabinfo only lists slabs that have data in them. See "slabinfo -h" for more options when running the command. slabinfo can be compiled with -gcc -o slabinfo Documentation/vm/slabinfo.c +gcc -o slabinfo tools/slub/slabinfo.c Some of the modes of operation of slabinfo require that slub debugging be enabled on the command line. F.e. no tracking information will be diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c index f0df3fbd8402..b9fc6c309d2e 100644 --- a/arch/alpha/kernel/srm_env.c +++ b/arch/alpha/kernel/srm_env.c @@ -4,9 +4,8 @@ * * (C) 2001,2002,2006 by Jan-Benedict Glaw * - * This driver is at all a modified version of Erik Mouw's - * Documentation/DocBook/procfs_example.c, so: thank - * you, Erik! He can be reached via email at + * This driver is a modified version of Erik Mouw's example proc + * interface, so: thank you, Erik! He can be reached via email at * . It is based on an idea * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They * included a patch like this as well. Thanks for idea! diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3269576dbfa8..05b53941b819 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1374,7 +1374,7 @@ config SMP processor machines. On a single processor machine, the kernel will run faster if you say N here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index d66605dea55a..4bdb77bb5e62 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -238,7 +238,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #ifndef __arch_ioremap diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index acc600f5e72f..937c42845df9 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -142,8 +142,7 @@ static struct platform_device *devices[] __initdata = { /* We have to state that there are HWMON devices on the I2C bus on XCEP. * Drivers for HWMON verify capabilities of the adapter when loading and - * refuse to attach if the adapter doesn't support HWMON class of devices. - * See also Documentation/i2c/porting-clients. */ + * refuse to attach if the adapter doesn't support HWMON class of devices. */ static struct i2c_pxa_platform_data xcep_i2c_platform_data = { .class = I2C_CLASS_HWMON }; diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 80241fe03f50..f5f4ef149aac 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -915,7 +915,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static dma_addr_t sba_map_page(struct device *dev, struct page *page, unsigned long poff, size_t size, @@ -1044,7 +1044,7 @@ sba_mark_clean(struct ioc *ioc, dma_addr_t iova, size_t size) * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) @@ -1127,7 +1127,7 @@ void sba_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void * sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags) @@ -1190,7 +1190,7 @@ sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_free_coherent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) @@ -1453,7 +1453,7 @@ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, @@ -1549,7 +1549,7 @@ static int sba_map_sg_attrs(struct device *dev, struct scatterlist *sglist, * @dir: R/W or both. * @attrs: optional dma attributes * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction dir, diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index b26d5f55e91d..93f4c4cd3c45 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): char/joystick/* # most of this should work, not # in default config.in block/q40ide.c # startup for ide - ide* # see Documentation/ide.txt + ide* # see Documentation/ide/ide.txt floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h index 8fbb0ec10233..a569514cf19f 100644 --- a/arch/microblaze/include/asm/dma-mapping.h +++ b/arch/microblaze/include/asm/dma-mapping.h @@ -16,7 +16,7 @@ #define _ASM_MICROBLAZE_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/mips/include/asm/lasat/lasat.h b/arch/mips/include/asm/lasat/lasat.h index a1ada1c27c16..e8ff70f80e13 100644 --- a/arch/mips/include/asm/lasat/lasat.h +++ b/arch/mips/include/asm/lasat/lasat.h @@ -41,10 +41,8 @@ enum lasat_mtdparts { /* * The format of the data record in the EEPROM. - * See Documentation/LASAT/eeprom.txt for a detailed description - * of the fields in this struct, and the LASAT Hardware Configuration - * field specification for a detailed description of the config - * field. + * See the LASAT Hardware Configuration field specification for a detailed + * description of the config field. */ #include diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 1f870340ebdd..f093b3a8a4a1 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -195,7 +195,7 @@ config SMP singleprocessor machines. On a singleprocessor machine, the kernel will run faster if you say N here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2623d19f4f4c..2381df83bd00 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -260,7 +260,6 @@ void set_intr_level(int irq, u16 level) /* * mark an interrupt to be ACK'd after interrupt handlers have been run rather * than before - * - see Documentation/mn10300/features.txt */ void mn10300_set_lateack_irq_type(int irq) { diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 4558bafbd1a2..9460e1c266dd 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -1,6 +1,6 @@ # # For a description of the syntax of this configuration file, -# see Documentation/kbuild/config-language.txt. +# see Documentation/kbuild/kconfig-language.txt. # config OPENRISC diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h index 60b472233900..b206ba4608b2 100644 --- a/arch/openrisc/include/asm/dma-mapping.h +++ b/arch/openrisc/include/asm/dma-mapping.h @@ -18,7 +18,7 @@ #define __ASM_OPENRISC_DMA_MAPPING_H /* - * See Documentation/PCI/PCI-DMA-mapping.txt and + * See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. * * This file is written with the intention of eventually moving over diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h index 890531e32fe8..467bbd510eac 100644 --- a/arch/parisc/include/asm/dma-mapping.h +++ b/arch/parisc/include/asm/dma-mapping.h @@ -5,7 +5,7 @@ #include #include -/* See Documentation/PCI/PCI-DMA-mapping.txt */ +/* See Documentation/DMA-API-HOWTO.txt */ struct hppa_dma_ops { int (*dma_supported)(struct device *dev, u64 mask); void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag); diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c index a029f74a3c5c..d047edea2504 100644 --- a/arch/parisc/kernel/pci-dma.c +++ b/arch/parisc/kernel/pci-dma.c @@ -2,7 +2,7 @@ ** PARISC 1.1 Dynamic DMA mapping support. ** This implementation is for PA-RISC platforms that do not support ** I/O TLBs (aka DMA address translation hardware). -** See Documentation/PCI/PCI-DMA-mapping.txt for interface definitions. +** See Documentation/DMA-API-HOWTO.txt for interface definitions. ** ** (c) Copyright 1999,2000 Hewlett-Packard Company ** (c) Copyright 2000 Grant Grundler diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index 0947b36e534c..5e0b6d511e14 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -196,7 +196,7 @@ static inline int qe_alive_during_sleep(void) /* Structure that defines QE firmware binary files. * - * See Documentation/powerpc/qe-firmware.txt for a description of these + * See Documentation/powerpc/qe_firmware.txt for a description of these * fields. */ struct qe_firmware { diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 904c6cbaf45b..3363fbc964f8 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -382,7 +382,7 @@ static void qe_upload_microcode(const void *base, /* * Upload a microcode to the I-RAM at a specific address. * - * See Documentation/powerpc/qe-firmware.txt for information on QE microcode + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode * uploading. * * Currently, only version 1 is supported, so the 'version' field must be diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h index 4bd87f3d13d4..1a5c5a5eb39c 100644 --- a/arch/unicore32/include/asm/io.h +++ b/arch/unicore32/include/asm/io.h @@ -32,7 +32,7 @@ extern void __uc32_iounmap(volatile void __iomem *addr); * ioremap and friends. * * ioremap takes a PCI memory address, as specified in - * Documentation/IO-mapping.txt. + * Documentation/io-mapping.txt. * */ #define ioremap(cookie, size) __uc32_ioremap(cookie, size) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6a47bb22657f..9a4a267a8a55 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -279,7 +279,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also , + See also , and the SMP-HOWTO available at . diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index c0f8a5c88910..bf56e1793272 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -139,7 +139,7 @@ config IOMMU_DEBUG code. When you use it make sure you have a big enough IOMMU/AGP aperture. Most of the options enabled by this can be set more finegrained using the iommu= command line - options. See Documentation/x86_64/boot-options.txt for more + options. See Documentation/x86/x86_64/boot-options.txt for more details. config IOMMU_STRESS diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 93e689f4bd86..bdb4d458ec8c 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -129,7 +129,7 @@ start_sys_seg: .word SYSSEG # obsolete and meaningless, but just type_of_loader: .byte 0 # 0 means ancient bootloader, newer # bootloaders know to change this. - # See Documentation/i386/boot.txt for + # See Documentation/x86/boot.txt for # assigned ids # flags, unused bits must be zero (RFU) bit within loadflags diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index d4c419f883a0..ed3065fd6314 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -2,7 +2,7 @@ #define _ASM_X86_DMA_MAPPING_H /* - * IOMMU interface. See Documentation/PCI/PCI-DMA-mapping.txt and + * IOMMU interface. See Documentation/DMA-API-HOWTO.txt and * Documentation/DMA-API.txt for documentation. */ diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index 8a439d364b94..b1e7c7f7a0af 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -5,7 +5,7 @@ * This allows to use PCI devices that only support 32bit addresses on systems * with more than 4GB. * - * See Documentation/PCI/PCI-DMA-mapping.txt for the interface specification. + * See Documentation/DMA-API-HOWTO.txt for the interface specification. * * Copyright 2002 Andi Kleen, SuSE Labs. * Subject to the GNU General Public License v2 only. diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0371c484bb8a..a46bd383953c 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -249,8 +249,6 @@ extern int (*console_blank_hook)(int); #define APM_MINOR_DEV 134 /* - * See Documentation/Config.help for the configuration options. - * * Various options can be changed at boot time as follows: * (We allow underscores for compatibility with the modules code) * apm=on/off enable/disable APM diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b49d00da2aed..622872054fbe 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -117,8 +117,8 @@ again: } /* - * See for the iommu kernel parameter - * documentation. + * See for the iommu kernel + * parameter documentation. */ static __init int iommu_setup(char *p) { diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index a7346ab97a3c..ae6a93306325 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -40,10 +40,7 @@ #define APM_MINOR_DEV 134 /* - * See Documentation/Config.help for the configuration options. - * - * Various options can be changed at boot time as follows: - * (We allow underscores for compatibility with the modules code) + * One option can be changed at boot time as follows: * apm=on/off enable/disable APM */ diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 2c8b84dd9dac..2be21694fac1 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -7,7 +7,7 @@ * state machine code inspired by code from Tim Ruetz * * A generic driver for rotary encoders connected to GPIO lines. - * See file:Documentation/input/rotary_encoder.txt for more information + * See file:Documentation/input/rotary-encoder.txt for more information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index b591e726a6fa..807c875f1c2e 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -400,7 +400,7 @@ config LEDS_TRIGGER_TIMER This allows LEDs to be controlled by a programmable timer via sysfs. Some LED hardware can be programmed to start blinking the LED without any further software interaction. - For more details read Documentation/leds-class.txt. + For more details read Documentation/leds/leds-class.txt. If unsure, say Y. diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c index c3bc64ed405c..7e3961d0db6b 100644 --- a/drivers/media/dvb/dvb-usb/af9005-remote.c +++ b/drivers/media/dvb/dvb-usb/af9005-remote.c @@ -21,7 +21,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * see Documentation/dvb/REDME.dvb-usb for more information + * see Documentation/dvb/README.dvb-usb for more information */ #include "af9005.h" /* debug */ diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c index 51f6439dcfd5..0351c0e52dd2 100644 --- a/drivers/media/dvb/dvb-usb/af9005.c +++ b/drivers/media/dvb/dvb-usb/af9005.c @@ -19,7 +19,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * see Documentation/dvb/REDME.dvb-usb for more information + * see Documentation/dvb/README.dvb-usb for more information */ #include "af9005.h" diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h index ba917359fa65..404f63a6f26b 100644 --- a/drivers/media/dvb/frontends/dib3000.h +++ b/drivers/media/dvb/frontends/dib3000.h @@ -17,7 +17,7 @@ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dibusb for more information + * see Documentation/dvb/README.dvb-usb for more information * */ diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index e80c59796368..437904cbf3e6 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -17,7 +17,7 @@ * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dibusb for more information + * see Documentation/dvb/README.dvb-usb for more information * */ diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 4be8373d43e5..66b616ebe536 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -142,7 +142,7 @@ config MTD_OF_PARTS help This provides a partition parsing function which derives the partition map from the children of the flash node, - as described in Documentation/powerpc/booting-without-of.txt. + as described in Documentation/devicetree/booting-without-of.txt. config MTD_AR7_PARTS tristate "TI AR7 partitioning support" diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8d0314dbd946..8b8efe52b228 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1063,8 +1063,7 @@ config SMSC911X Say Y here if you want support for SMSC LAN911x and LAN921x families of ethernet controllers. - To compile this driver as a module, choose M here and read - . The module + To compile this driver as a module, choose M here. The module will be called smsc911x. config SMSC911X_ARCH_HOOKS diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c index cee6ba2b8b58..c3dd9d09be57 100644 --- a/drivers/net/can/sja1000/sja1000_of_platform.c +++ b/drivers/net/can/sja1000/sja1000_of_platform.c @@ -29,7 +29,7 @@ * nxp,external-clock-frequency = <16000000>; * }; * - * See "Documentation/powerpc/dts-bindings/can/sja1000.txt" for further + * See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further * information. */ diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 092c3faa882a..25b8deedbef8 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller Hardware Reference Manual" is currently available at : http://developer.intel.com/design/network/manuals/278074.htm diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c index fa5eee925f25..14d5b611783d 100644 --- a/drivers/net/tulip/eeprom.c +++ b/drivers/net/tulip/eeprom.c @@ -7,8 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. Please submit bug reports to http://bugzilla.kernel.org/. */ diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c index 5350d753e0ff..4fb8c8c0a420 100644 --- a/drivers/net/tulip/interrupt.c +++ b/drivers/net/tulip/interrupt.c @@ -7,10 +7,7 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. Please submit bugs to http://bugzilla.kernel.org/ . - */ #include diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index 4bd13922875d..beeb17b52ad4 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/pnic.c b/drivers/net/tulip/pnic.c index 52d898bdbeb4..9c16e4ad02a6 100644 --- a/drivers/net/tulip/pnic.c +++ b/drivers/net/tulip/pnic.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index 93358ee4d830..04a7e477eaff 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -8,9 +8,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c index 2017faf2d0e6..19078d28ffb9 100644 --- a/drivers/net/tulip/timer.c +++ b/drivers/net/tulip/timer.c @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h index 9db528967da9..fb3887c18dc6 100644 --- a/drivers/net/tulip/tulip.h +++ b/drivers/net/tulip/tulip.h @@ -7,9 +7,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 1246998a677c..b905c0dc5648 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -6,9 +6,6 @@ This software may be used and distributed according to the terms of the GNU General Public License, incorporated herein by reference. - Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} - for more information on this driver. - Please submit bugs to http://bugzilla.kernel.org/ . */ diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 57a6d19eba4c..a6f762188bc3 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,7 +680,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + /* Documentation/DMA-API-HOWTO.txt tells drivers to try 64-bit * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/PCI/PCI-DMA-mapping.txt + * See Documentation/DMA-API-HOWTO.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 1e88d4785321..10cf2500522b 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -31,9 +31,6 @@ config ACER_WMI wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. - For more information about this driver see - - If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. @@ -164,7 +161,7 @@ config HP_ACCEL Support for a led indicating disk protection will be provided as hp::hddprotect. For more information on the feature, refer to - Documentation/hwmon/lis3lv02d. + Documentation/misc-devices/lis3lv02d. To compile this driver as a module, choose M here: the module will be called hp_accel. diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index 2e6619eff3ea..8883ca36f932 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -67,7 +67,7 @@ * * NEC MegaRAID PCI Express ROMB 1000 0408 1033 8287 * - * For history of changes, see Documentation/ChangeLog.megaraid + * For history of changes, see Documentation/scsi/ChangeLog.megaraid */ #include diff --git a/drivers/staging/cxt1e1/Kconfig b/drivers/staging/cxt1e1/Kconfig index 73430ef6ae2b..947f42a65c59 100644 --- a/drivers/staging/cxt1e1/Kconfig +++ b/drivers/staging/cxt1e1/Kconfig @@ -6,8 +6,7 @@ config CXT1E1 channelized stream WAN adapter card which contains a HDLC/Transparent mode controller. - If you want to compile this driver as a module - say M here and read . + If you want to compile this driver as a module say M here. The module will be called 'cxt1e1'. If unsure, say N. diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index 86fbba6336c9..e92cbefc0f88 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -227,7 +227,7 @@ * - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to * recheck the condition they are sleeping on. This is defensive, * in case a wake up is lost. -* - Following Documentation/DocBook/kernel-locking.pdf no spin locks +* - Following Documentation/DocBook/kernel-locking.tmpl no spin locks * are held when calling copy_to/from_user or printk. */ diff --git a/drivers/video/igafb.c b/drivers/video/igafb.c index d885c770eb84..2d97752f79a5 100644 --- a/drivers/video/igafb.c +++ b/drivers/video/igafb.c @@ -428,7 +428,7 @@ static int __init igafb_init(void) * * IGS2000 has its I/O memory mapped and we want * to generate memory cycles on PCI, e.g. do ioremap(), - * then readb/writeb() as in Documentation/IO-mapping.txt. + * then readb/writeb() as in Documentation/io-mapping.txt. * * IGS1682 is more traditional, it responds to PCI I/O * cycles, so we want to access it with inb()/outb(). diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index e97b0499bd0d..97b8184614ae 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -40,7 +40,7 @@ * mknod /dev/watchdog c 10 130 * * For an example userspace keep-alive daemon, see: - * Documentation/watchdog/watchdog.txt + * Documentation/watchdog/wdt.txt */ #include diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index c83f4768eeaa..ca418aaf6352 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -23,7 +23,8 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please see Documentation/filesystems/configfs.txt for more information. + * Please see Documentation/filesystems/configfs/configfs.txt for more + * information. */ #undef DEBUG diff --git a/fs/configfs/item.c b/fs/configfs/item.c index 76dc4c3e5d51..50cee7f9110b 100644 --- a/fs/configfs/item.c +++ b/fs/configfs/item.c @@ -23,7 +23,7 @@ * * configfs Copyright (C) 2005 Oracle. All rights reserved. * - * Please see the file Documentation/filesystems/configfs.txt for + * Please see the file Documentation/filesystems/configfs/configfs.txt for * critical information about using the config_item interface. */ diff --git a/fs/locks.c b/fs/locks.c index 703f545097de..96b33989147d 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -60,7 +60,7 @@ * * Initial implementation of mandatory locks. SunOS turned out to be * a rotten model, so I implemented the "obvious" semantics. - * See 'Documentation/mandatory.txt' for details. + * See 'Documentation/filesystems/mandatory-locking.txt' for details. * Andy Walker (andy@lysaker.kvaerner.no), April 06, 1996. * * Don't allow mandatory locks on mmap()'ed files. Added simple functions to diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig index 1360d4f88f41..048b59d5b2f0 100644 --- a/fs/squashfs/Kconfig +++ b/fs/squashfs/Kconfig @@ -19,9 +19,9 @@ config SQUASHFS If you want to compile this as a module ( = code which can be inserted in and removed from the running kernel whenever you want), - say M here and read . The module - will be called squashfs. Note that the root file system (the one - containing the directory /) cannot be compiled as a module. + say M here. The module will be called squashfs. Note that the root + file system (the one containing the directory /) cannot be compiled + as a module. If unsure, say N. diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 8cdcc2a199ad..c81ed2ac16bd 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -27,7 +27,7 @@ * The io_mapping mechanism provides an abstraction for mapping * individual pages from an io device to the CPU in an efficient fashion. * - * See Documentation/io_mapping.txt + * See Documentation/io-mapping.txt */ #ifdef CONFIG_HAVE_ATOMIC_IOMAP diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 44cd663c53b6..4ccf95d681b4 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -68,7 +68,7 @@ #define ISDN_NET_ENCAP_SYNCPPP 4 #define ISDN_NET_ENCAP_UIHDLC 5 #define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/ +#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ #define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE /* Facility which currently uses an ISDN-channel */ diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index abd286215279..88734e871e3a 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc + * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 1c647e8148c4..d8fb6012c10d 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -34,7 +34,7 @@ * does memory allocation too using vmalloc_32(). * * videobuf_dma_*() - * see Documentation/PCI/PCI-DMA-mapping.txt, these functions to + * see Documentation/DMA-API-HOWTO.txt, these functions to * basically the same. The map function does also build a * scatterlist for the buffer (and unmap frees it ...) * diff --git a/include/target/configfs_macros.h b/include/target/configfs_macros.h index 7fe74608b437..a0fc85bbe2da 100644 --- a/include/target/configfs_macros.h +++ b/include/target/configfs_macros.h @@ -30,8 +30,8 @@ * Added CONFIGFS_EATTR() macros from original configfs.h macros * Copright (C) 2008-2009 Nicholas A. Bellinger * - * Please read Documentation/filesystems/configfs.txt before using the - * configfs interface, ESPECIALLY the parts about reference counts and + * Please read Documentation/filesystems/configfs/configfs.txt before using + * the configfs interface, ESPECIALLY the parts about reference counts and * item destructors. */ diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 32bff6d86cb2..8260b13d93c9 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -505,7 +505,7 @@ config NETFILTER_XT_TARGET_LED echo netfilter-ssh > /sys/class/leds//trigger For more information on the LEDs available on your system, see - Documentation/leds-class.txt + Documentation/leds/leds-class.txt config NETFILTER_XT_TARGET_MARK tristate '"MARK" target support' diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 6c93e051f9ae..6c9e8e8f45f8 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -432,9 +432,7 @@ config SOUND_SB ALS-007 and ALS-1X0 chips (read ) and for cards based on ESS chips (read and - ). If you have an SB AWE 32 or SB AWE - 64, say Y here and also to "AWE32 synth" below and read - . If you have an IBM Mwave + ). If you have an IBM Mwave card, say Y here and read . If you compile the driver into the kernel and don't want to use diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c index fe02903f7d0f..80d9598db31a 100644 --- a/tools/perf/util/config.c +++ b/tools/perf/util/config.c @@ -341,7 +341,7 @@ const char *perf_config_dirname(const char *name, const char *value) static int perf_default_core_config(const char *var __used, const char *value __used) { - /* Add other config variables here and to Documentation/config.txt. */ + /* Add other config variables here. */ return 0; } @@ -350,7 +350,7 @@ int perf_default_config(const char *var, const char *value, void *dummy __used) if (!prefixcmp(var, "core.")) return perf_default_core_config(var, value); - /* Add other config variables here and to Documentation/config.txt. */ + /* Add other config variables here. */ return 0; } -- cgit v1.2.3 From d6069dae4700cf5290a75002c46b9be8ea7eef3c Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 4 Oct 2011 22:50:45 -0700 Subject: Input: wacom - revert "Cintiq 21UX2 does not have menu strips" This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2. The 21UX2 does have touchstrips, but they are in a somewhat- hidden location. Signed-off-by: Jason Gerecke Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 0dc97ec15c28..9dea71849f40 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1124,11 +1124,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, for (i = 0; i < 8; i++) __set_bit(BTN_0 + i, input_dev->keybit); - if (wacom_wac->features.type != WACOM_21UX2) { - input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); - input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); - } - + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); -- cgit v1.2.3 From 1e036f65329901a2432c92132b785654944743d9 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 12 Oct 2011 11:57:53 +0300 Subject: Input: twl6040: Simplify vibra regsiter definitions The bits within the two control registers (for left and right channel) are identical. Use common names for the bits acros the two register. Also add the missing definition for the path selection bit. Signed-off-by: Peter Ujfalusi Acked-by: Dmitry Torokhov Signed-off-by: Mark Brown --- drivers/input/misc/twl6040-vibra.c | 12 ++++++------ include/linux/mfd/twl6040.h | 20 +++++++------------- 2 files changed, 13 insertions(+), 19 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 154b7a324d67..cb741858229a 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -74,12 +74,12 @@ static irqreturn_t twl6040_vib_irq_handler(int irq, void *data) if (status & TWL6040_VIBLOCDET) { dev_warn(info->dev, "Left Vibrator overcurrent detected\n"); twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL, - TWL6040_VIBENAL); + TWL6040_VIBENA); } if (status & TWL6040_VIBROCDET) { dev_warn(info->dev, "Right Vibrator overcurrent detected\n"); twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR, - TWL6040_VIBENAR); + TWL6040_VIBENA); } return IRQ_HANDLED; @@ -104,16 +104,16 @@ static void twl6040_vibra_enable(struct vibra_info *info) * overcurrent detection */ twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, - TWL6040_VIBENAL | TWL6040_VIBCTRLL); + TWL6040_VIBENA | TWL6040_VIBCTRL); twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, - TWL6040_VIBENAR | TWL6040_VIBCTRLR); + TWL6040_VIBENA | TWL6040_VIBCTRL); usleep_range(3000, 3500); } twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, - TWL6040_VIBENAL); + TWL6040_VIBENA); twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, - TWL6040_VIBENAR); + TWL6040_VIBENA); info->enabled = true; } diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index d9e05eabef33..e6c755db4560 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -125,24 +125,18 @@ #define TWL6040_HSDACMODE (1 << 1) #define TWL6040_HSDRVMODE (1 << 3) -/* VIBCTLL (0x18) fields */ +/* VIBCTLL/R (0x18/0x1A) fields */ -#define TWL6040_VIBENAL 0x01 -#define TWL6040_VIBCTRLL 0x04 -#define TWL6040_VIBCTRLLP 0x08 -#define TWL6040_VIBCTRLLN 0x10 +#define TWL6040_VIBENA (1 << 0) +#define TWL6040_VIBSEL (1 << 1) +#define TWL6040_VIBCTRL (1 << 2) +#define TWL6040_VIBCTRL_P (1 << 3) +#define TWL6040_VIBCTRL_N (1 << 4) -/* VIBDATL (0x19) fields */ +/* VIBDATL/R (0x19/0x1B) fields */ #define TWL6040_VIBDAT_MAX 0x64 -/* VIBCTLR (0x1A) fields */ - -#define TWL6040_VIBENAR 0x01 -#define TWL6040_VIBCTRLR 0x04 -#define TWL6040_VIBCTRLRP 0x08 -#define TWL6040_VIBCTRLRN 0x10 - /* GPOCTL (0x1E) fields */ #define TWL6040_GPO1 0x01 -- cgit v1.2.3 From 5f07c32e289d159be3fc1e4f257e8cad5336f83a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 12 Oct 2011 11:57:56 +0300 Subject: Input: twl6040-vibra: Check the selected path for vibra The VIBSELL/R bit in the VIBCTLL/R register tells the source of the data, which is going to be used to drive the attached motor(s). Do not allow effect execution if any of the channels are set to receive audio data. Signed-off-by: Peter Ujfalusi Acked-by: Dmitry Torokhov Signed-off-by: Mark Brown --- drivers/input/misc/twl6040-vibra.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index cb741858229a..2a828e53db58 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -201,6 +201,13 @@ static int vibra_play(struct input_dev *input, void *data, struct vibra_info *info = input_get_drvdata(input); int ret; + /* Do not allow effect, while the routing is set to use audio */ + ret = twl6040_get_vibralr_status(info->twl6040); + if (ret & TWL6040_VIBSEL) { + dev_info(&input->dev, "Vibra is configured for audio\n"); + return -EBUSY; + } + info->weak_speed = effect->u.rumble.weak_magnitude; info->strong_speed = effect->u.rumble.strong_magnitude; info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; -- cgit v1.2.3 From 8dd93eeee873d2383dbca4cca1983b6731efdb75 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 24 Aug 2011 15:28:22 +0200 Subject: input: Convert mc13783-ts to mc13xxx API MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is the first step to also support the touch interface of the mc13892 pmic chip. Signed-off-by: Uwe Kleine-König Signed-off-by: Samuel Ortiz --- drivers/input/touchscreen/mc13783_ts.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c index c5bc62d85bb6..ede02743eac1 100644 --- a/drivers/input/touchscreen/mc13783_ts.c +++ b/drivers/input/touchscreen/mc13783_ts.c @@ -35,7 +35,7 @@ MODULE_PARM_DESC(sample_tolerance, struct mc13783_ts_priv { struct input_dev *idev; - struct mc13783 *mc13783; + struct mc13xxx *mc13xxx; struct delayed_work work; struct workqueue_struct *workq; unsigned int sample[4]; @@ -45,7 +45,7 @@ static irqreturn_t mc13783_ts_handler(int irq, void *data) { struct mc13783_ts_priv *priv = data; - mc13783_irq_ack(priv->mc13783, irq); + mc13xxx_irq_ack(priv->mc13xxx, irq); /* * Kick off reading coordinates. Note that if work happens already @@ -121,10 +121,10 @@ static void mc13783_ts_work(struct work_struct *work) { struct mc13783_ts_priv *priv = container_of(work, struct mc13783_ts_priv, work.work); - unsigned int mode = MC13783_ADC_MODE_TS; + unsigned int mode = MC13XXX_ADC_MODE_TS; unsigned int channel = 12; - if (mc13783_adc_do_conversion(priv->mc13783, + if (mc13xxx_adc_do_conversion(priv->mc13xxx, mode, channel, priv->sample) == 0) mc13783_ts_report_sample(priv); } @@ -134,21 +134,21 @@ static int mc13783_ts_open(struct input_dev *dev) struct mc13783_ts_priv *priv = input_get_drvdata(dev); int ret; - mc13783_lock(priv->mc13783); + mc13xxx_lock(priv->mc13xxx); - mc13783_irq_ack(priv->mc13783, MC13783_IRQ_TS); + mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS); - ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS, + ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS, mc13783_ts_handler, MC13783_TS_NAME, priv); if (ret) goto out; - ret = mc13783_reg_rmw(priv->mc13783, MC13783_ADC0, - MC13783_ADC0_TSMOD_MASK, MC13783_ADC0_TSMOD0); + ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0, + MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0); if (ret) - mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv); + mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv); out: - mc13783_unlock(priv->mc13783); + mc13xxx_unlock(priv->mc13xxx); return ret; } @@ -156,11 +156,11 @@ static void mc13783_ts_close(struct input_dev *dev) { struct mc13783_ts_priv *priv = input_get_drvdata(dev); - mc13783_lock(priv->mc13783); - mc13783_reg_rmw(priv->mc13783, MC13783_ADC0, - MC13783_ADC0_TSMOD_MASK, 0); - mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv); - mc13783_unlock(priv->mc13783); + mc13xxx_lock(priv->mc13xxx); + mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0, + MC13XXX_ADC0_TSMOD_MASK, 0); + mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv); + mc13xxx_unlock(priv->mc13xxx); cancel_delayed_work_sync(&priv->work); } @@ -177,7 +177,7 @@ static int __init mc13783_ts_probe(struct platform_device *pdev) goto err_free_mem; INIT_DELAYED_WORK(&priv->work, mc13783_ts_work); - priv->mc13783 = dev_get_drvdata(pdev->dev.parent); + priv->mc13xxx = dev_get_drvdata(pdev->dev.parent); priv->idev = idev; /* -- cgit v1.2.3 From 30fc7ac3f62945a714d9842edae313a757efb49d Mon Sep 17 00:00:00 2001 From: Philippe Rétornaz Date: Sun, 18 Sep 2011 18:10:53 +0200 Subject: input: Add power button support for mc13783 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds support for the power-on buttons of MC13783 PMIC. Signed-off-by: Philippe Rétornaz Acked-by: Dmitry Torokhov Signed-off-by: Uwe Kleine-König Signed-off-by: Samuel Ortiz --- drivers/input/misc/Kconfig | 10 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/mc13783-pwrbutton.c | 282 +++++++++++++++++++++++++++++++++ drivers/mfd/mc13xxx-core.c | 9 ++ include/linux/mfd/mc13xxx.h | 17 ++ 5 files changed, 319 insertions(+) create mode 100644 drivers/input/misc/mc13783-pwrbutton.c (limited to 'drivers/input') diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index c9104bb4db06..7331229e2347 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -100,6 +100,16 @@ config INPUT_MAX8925_ONKEY To compile this driver as a module, choose M here: the module will be called max8925_onkey. +config INPUT_MC13783_PWRBUTTON + tristate "MC13783 ON buttons" + depends on MFD_MC13783 + help + Support the ON buttons of MC13783 PMIC as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called mc13783-pwrbutton. + config INPUT_MMA8450 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" depends on I2C diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 299ad5edba84..f54ccc2d9cb5 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o +obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o obj-$(CONFIG_INPUT_MMA8450) += mma8450.o obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c new file mode 100644 index 000000000000..09b052288657 --- /dev/null +++ b/drivers/input/misc/mc13783-pwrbutton.c @@ -0,0 +1,282 @@ +/** + * Copyright (C) 2011 Philippe Rétornaz + * + * Based on twl4030-pwrbutton driver by: + * Peter De Schrijver + * Felipe Balbi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mc13783_pwrb { + struct input_dev *pwr; + struct mc13xxx *mc13783; +#define MC13783_PWRB_B1_POL_INVERT (1 << 0) +#define MC13783_PWRB_B2_POL_INVERT (1 << 1) +#define MC13783_PWRB_B3_POL_INVERT (1 << 2) + int flags; + unsigned short keymap[3]; +}; + +#define MC13783_REG_INTERRUPT_SENSE_1 5 +#define MC13783_IRQSENSE1_ONOFD1S (1 << 3) +#define MC13783_IRQSENSE1_ONOFD2S (1 << 4) +#define MC13783_IRQSENSE1_ONOFD3S (1 << 5) + +#define MC13783_REG_POWER_CONTROL_2 15 +#define MC13783_POWER_CONTROL_2_ON1BDBNC 4 +#define MC13783_POWER_CONTROL_2_ON2BDBNC 6 +#define MC13783_POWER_CONTROL_2_ON3BDBNC 8 +#define MC13783_POWER_CONTROL_2_ON1BRSTEN (1 << 1) +#define MC13783_POWER_CONTROL_2_ON2BRSTEN (1 << 2) +#define MC13783_POWER_CONTROL_2_ON3BRSTEN (1 << 3) + +static irqreturn_t button_irq(int irq, void *_priv) +{ + struct mc13783_pwrb *priv = _priv; + int val; + + mc13xxx_irq_ack(priv->mc13783, irq); + mc13xxx_reg_read(priv->mc13783, MC13783_REG_INTERRUPT_SENSE_1, &val); + + switch (irq) { + case MC13783_IRQ_ONOFD1: + val = val & MC13783_IRQSENSE1_ONOFD1S ? 1 : 0; + if (priv->flags & MC13783_PWRB_B1_POL_INVERT) + val ^= 1; + input_report_key(priv->pwr, priv->keymap[0], val); + break; + + case MC13783_IRQ_ONOFD2: + val = val & MC13783_IRQSENSE1_ONOFD2S ? 1 : 0; + if (priv->flags & MC13783_PWRB_B2_POL_INVERT) + val ^= 1; + input_report_key(priv->pwr, priv->keymap[1], val); + break; + + case MC13783_IRQ_ONOFD3: + val = val & MC13783_IRQSENSE1_ONOFD3S ? 1 : 0; + if (priv->flags & MC13783_PWRB_B3_POL_INVERT) + val ^= 1; + input_report_key(priv->pwr, priv->keymap[2], val); + break; + } + + input_sync(priv->pwr); + + return IRQ_HANDLED; +} + +static int __devinit mc13783_pwrbutton_probe(struct platform_device *pdev) +{ + const struct mc13xxx_buttons_platform_data *pdata; + struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent); + struct input_dev *pwr; + struct mc13783_pwrb *priv; + int err = 0; + int reg = 0; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + pwr = input_allocate_device(); + if (!pwr) { + dev_dbg(&pdev->dev, "Can't allocate power button\n"); + return -ENOMEM; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + err = -ENOMEM; + dev_dbg(&pdev->dev, "Can't allocate power button\n"); + goto free_input_dev; + } + + reg |= (pdata->b1on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC; + reg |= (pdata->b2on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC; + reg |= (pdata->b3on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC; + + priv->pwr = pwr; + priv->mc13783 = mc13783; + + mc13xxx_lock(mc13783); + + if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) { + priv->keymap[0] = pdata->b1on_key; + if (pdata->b1on_key != KEY_RESERVED) + __set_bit(pdata->b1on_key, pwr->keybit); + + if (pdata->b1on_flags & MC13783_BUTTON_POL_INVERT) + priv->flags |= MC13783_PWRB_B1_POL_INVERT; + + if (pdata->b1on_flags & MC13783_BUTTON_RESET_EN) + reg |= MC13783_POWER_CONTROL_2_ON1BRSTEN; + + err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD1, + button_irq, "b1on", priv); + if (err) { + dev_dbg(&pdev->dev, "Can't request irq\n"); + goto free_priv; + } + } + + if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) { + priv->keymap[1] = pdata->b2on_key; + if (pdata->b2on_key != KEY_RESERVED) + __set_bit(pdata->b2on_key, pwr->keybit); + + if (pdata->b2on_flags & MC13783_BUTTON_POL_INVERT) + priv->flags |= MC13783_PWRB_B2_POL_INVERT; + + if (pdata->b2on_flags & MC13783_BUTTON_RESET_EN) + reg |= MC13783_POWER_CONTROL_2_ON2BRSTEN; + + err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD2, + button_irq, "b2on", priv); + if (err) { + dev_dbg(&pdev->dev, "Can't request irq\n"); + goto free_irq_b1; + } + } + + if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) { + priv->keymap[2] = pdata->b3on_key; + if (pdata->b3on_key != KEY_RESERVED) + __set_bit(pdata->b3on_key, pwr->keybit); + + if (pdata->b3on_flags & MC13783_BUTTON_POL_INVERT) + priv->flags |= MC13783_PWRB_B3_POL_INVERT; + + if (pdata->b3on_flags & MC13783_BUTTON_RESET_EN) + reg |= MC13783_POWER_CONTROL_2_ON3BRSTEN; + + err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD3, + button_irq, "b3on", priv); + if (err) { + dev_dbg(&pdev->dev, "Can't request irq: %d\n", err); + goto free_irq_b2; + } + } + + mc13xxx_reg_rmw(mc13783, MC13783_REG_POWER_CONTROL_2, 0x3FE, reg); + + mc13xxx_unlock(mc13783); + + pwr->name = "mc13783_pwrbutton"; + pwr->phys = "mc13783_pwrbutton/input0"; + pwr->dev.parent = &pdev->dev; + + pwr->keycode = priv->keymap; + pwr->keycodemax = ARRAY_SIZE(priv->keymap); + pwr->keycodesize = sizeof(priv->keymap[0]); + __set_bit(EV_KEY, pwr->evbit); + + err = input_register_device(pwr); + if (err) { + dev_dbg(&pdev->dev, "Can't register power button: %d\n", err); + goto free_irq; + } + + platform_set_drvdata(pdev, priv); + + return 0; + +free_irq: + mc13xxx_lock(mc13783); + + if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD3, priv); + +free_irq_b2: + if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD2, priv); + +free_irq_b1: + if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD1, priv); + +free_priv: + mc13xxx_unlock(mc13783); + kfree(priv); + +free_input_dev: + input_free_device(pwr); + + return err; +} + +static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev) +{ + struct mc13783_pwrb *priv = platform_get_drvdata(pdev); + const struct mc13xxx_buttons_platform_data *pdata; + + pdata = dev_get_platdata(&pdev->dev); + + mc13xxx_lock(priv->mc13783); + + if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD3, priv); + if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD2, priv); + if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) + mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD1, priv); + + mc13xxx_unlock(priv->mc13783); + + input_unregister_device(priv->pwr); + kfree(priv); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +struct platform_driver mc13783_pwrbutton_driver = { + .probe = mc13783_pwrbutton_probe, + .remove = __devexit_p(mc13783_pwrbutton_remove), + .driver = { + .name = "mc13783-pwrbutton", + .owner = THIS_MODULE, + }, +}; + +static int __init mc13783_pwrbutton_init(void) +{ + return platform_driver_register(&mc13783_pwrbutton_driver); +} +module_init(mc13783_pwrbutton_init); + +static void __exit mc13783_pwrbutton_exit(void) +{ + platform_driver_unregister(&mc13783_pwrbutton_driver); +} +module_exit(mc13783_pwrbutton_exit); + +MODULE_ALIAS("platform:mc13783-pwrbutton"); +MODULE_DESCRIPTION("MC13783 Power Button"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Philippe Retornaz"); diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index e55b22136234..edcd397cae11 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -703,6 +703,11 @@ static int mc13xxx_probe(struct spi_device *spi) enum mc13xxx_id id; int ret; + if (!pdata) { + dev_err(&spi->dev, "invalid platform data\n"); + return -EINVAL; + } + mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL); if (!mc13xxx) return -ENOMEM; @@ -763,6 +768,10 @@ err_revision: mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led", pdata->leds, sizeof(*pdata->leds)); + if (pdata->buttons) + mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton", + pdata->buttons, sizeof(*pdata->buttons)); + return 0; } diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index 1acf9cbf5f25..3816c2fac0ad 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -140,6 +140,22 @@ struct mc13xxx_leds_platform_data { char tc3_period; }; +struct mc13xxx_buttons_platform_data { +#define MC13783_BUTTON_DBNC_0MS 0 +#define MC13783_BUTTON_DBNC_30MS 1 +#define MC13783_BUTTON_DBNC_150MS 2 +#define MC13783_BUTTON_DBNC_750MS 3 +#define MC13783_BUTTON_ENABLE (1 << 2) +#define MC13783_BUTTON_POL_INVERT (1 << 3) +#define MC13783_BUTTON_RESET_EN (1 << 4) + int b1on_flags; + unsigned short b1on_key; + int b2on_flags; + unsigned short b2on_key; + int b3on_flags; + unsigned short b3on_key; +}; + struct mc13xxx_platform_data { #define MC13XXX_USE_TOUCHSCREEN (1 << 0) #define MC13XXX_USE_CODEC (1 << 1) @@ -149,6 +165,7 @@ struct mc13xxx_platform_data { struct mc13xxx_regulator_platform_data regulators; struct mc13xxx_leds_platform_data *leds; + struct mc13xxx_buttons_platform_data *buttons; }; #define MC13XXX_ADC_MODE_TS 1 -- cgit v1.2.3 From d2d8442d0094a7d4b585e2bbde31e3775dba7eb1 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 3 Jul 2011 13:53:48 -0400 Subject: drivers/input: Add module.h to modular drivers implicitly using it A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in input dir are actually calling out for explicitly in advance. Signed-off-by: Paul Gortmaker --- drivers/input/input-polldev.c | 1 + drivers/input/joystick/as5011.c | 1 + drivers/input/keyboard/nomadik-ske-keypad.c | 1 + drivers/input/keyboard/tnetv107x-keypad.c | 1 + drivers/input/misc/ad714x.c | 1 + drivers/input/misc/adxl34x.c | 1 + drivers/input/misc/ati_remote2.c | 1 + drivers/input/misc/cma3000_d0x.c | 1 + drivers/input/misc/dm355evm_keys.c | 1 + drivers/input/sparse-keymap.c | 1 + drivers/input/touchscreen/ad7877.c | 1 + drivers/input/touchscreen/ad7879-spi.c | 1 + drivers/input/touchscreen/ad7879.c | 1 + drivers/input/touchscreen/ads7846.c | 1 + drivers/input/touchscreen/bu21013_ts.c | 1 + 15 files changed, 15 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c index b253973881b8..7dfe1009fae0 100644 --- a/drivers/input/input-polldev.c +++ b/drivers/input/input-polldev.c @@ -14,6 +14,7 @@ #include #include #include +#include #include MODULE_AUTHOR("Dmitry Torokhov "); diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c index f6732b57ca07..6d6e7418dc21 100644 --- a/drivers/input/joystick/as5011.c +++ b/drivers/input/joystick/as5011.c @@ -30,6 +30,7 @@ #include #include #include +#include #define DRIVER_DESC "Driver for Austria Microsystems AS5011 joystick" #define MODULE_DEVICE_ALIAS "as5011" diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index 6e0f23091360..fcdec5e2b297 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -18,6 +18,7 @@ #include #include #include +#include #include diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c index 1c58681de81f..66e55e5cfdd6 100644 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ b/drivers/input/keyboard/tnetv107x-keypad.c @@ -24,6 +24,7 @@ #include #include #include +#include #define BITS(x) (BIT(x) - 1) diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index ca42c7d2a3c7..0ac75bbad4d6 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "ad714x.h" #define AD714X_PWR_CTRL 0x0 diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c index 144ddbdeb9b3..09244804fb97 100644 --- a/drivers/input/misc/adxl34x.c +++ b/drivers/input/misc/adxl34x.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "adxl34x.h" diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 1de58e8a1b71..8d345e87075e 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -11,6 +11,7 @@ #include #include +#include #define DRIVER_DESC "ATI/Philips USB RF remote driver" #define DRIVER_VERSION "0.3" diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c index 1633b6342267..80793f1608eb 100644 --- a/drivers/input/misc/cma3000_d0x.c +++ b/drivers/input/misc/cma3000_d0x.c @@ -23,6 +23,7 @@ #include #include #include +#include #include "cma3000_d0x.h" diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c index 19af682c24fb..7283dd2a1ad3 100644 --- a/drivers/input/misc/dm355evm_keys.c +++ b/drivers/input/misc/dm355evm_keys.c @@ -17,6 +17,7 @@ #include #include +#include /* diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c index fdb6a3976f94..75fb040a3435 100644 --- a/drivers/input/sparse-keymap.c +++ b/drivers/input/sparse-keymap.c @@ -15,6 +15,7 @@ #include #include +#include #include MODULE_AUTHOR("Dmitry Torokhov "); diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index 714d4e0f9f95..400131df677b 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #define TS_PEN_UP_TIMEOUT msecs_to_jiffies(100) diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index ddf732f3cafc..b1643c8fa7c9 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -9,6 +9,7 @@ #include /* BUS_SPI */ #include #include +#include #include "ad7879.h" diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c index 131f9d1c921b..3b2e9ed2aeec 100644 --- a/drivers/input/touchscreen/ad7879.c +++ b/drivers/input/touchscreen/ad7879.c @@ -33,6 +33,7 @@ #include #include +#include #include "ad7879.h" #define AD7879_REG_ZEROS 0 diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index d507b9b67806..de31ec6fe9e4 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -31,6 +31,7 @@ #include #include #include +#include #include /* diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 1507ce108d5b..902c7214e887 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -13,6 +13,7 @@ #include #include #include +#include #define PEN_DOWN_INTR 0 #define MAX_FINGERS 2 -- cgit v1.2.3 From 15d0580f20f5d3f997e3823bfe39daa3d521a99d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 25 Oct 2011 14:51:47 -0400 Subject: drivers/input: add export.h to symbol exporting files. These files are not modules but are exporting symbols and/or making use of THIS_MODULE macro. Signed-off-by: Paul Gortmaker --- drivers/input/input-compat.c | 1 + drivers/input/input-mt.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/input-compat.c b/drivers/input/input-compat.c index 1accb89ae66f..e46a86776a6b 100644 --- a/drivers/input/input-compat.c +++ b/drivers/input/input-compat.c @@ -8,6 +8,7 @@ * the Free Software Foundation. */ +#include #include #include "input-compat.h" diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index 9150ee78e00a..f658086fbbe0 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -9,6 +9,7 @@ */ #include +#include #include #define TRKID_SGN ((TRKID_MAX + 1) >> 1) -- cgit v1.2.3 From 3369465ed1a6a9aa9b885a6d7d8e074ecbd782da Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 18 Aug 2011 20:11:59 +0100 Subject: um: switch to use of drivers/Kconfig Signed-off-by: Al Viro Signed-off-by: Richard Weinberger --- arch/um/Kconfig.rest | 23 +---------------------- drivers/char/Kconfig | 6 +++--- drivers/char/ttyprintk.c | 2 +- drivers/input/Kconfig | 2 +- drivers/isdn/Kconfig | 2 +- drivers/power/Kconfig | 1 + drivers/rtc/Kconfig | 2 +- drivers/tty/Kconfig | 2 +- drivers/watchdog/Kconfig | 2 +- security/integrity/ima/Kconfig | 2 +- sound/Kconfig | 2 +- 11 files changed, 13 insertions(+), 33 deletions(-) (limited to 'drivers/input') diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest index 0ccad0ff6d6e..567eb5fc21df 100644 --- a/arch/um/Kconfig.rest +++ b/arch/um/Kconfig.rest @@ -2,20 +2,14 @@ source "init/Kconfig" source "kernel/Kconfig.freezer" -source "drivers/block/Kconfig" - source "arch/um/Kconfig.char" -source "drivers/base/Kconfig" +source "drivers/Kconfig" source "net/Kconfig" source "arch/um/Kconfig.net" -source "drivers/net/Kconfig" - -source "drivers/connector/Kconfig" - source "fs/Kconfig" source "security/Kconfig" @@ -24,19 +18,4 @@ source "crypto/Kconfig" source "lib/Kconfig" -source "drivers/scsi/Kconfig" - -source "drivers/md/Kconfig" - -if BROKEN - source "drivers/mtd/Kconfig" -endif - -source "drivers/leds/Kconfig" - -#This is just to shut up some Kconfig warnings, so no prompt. -config INPUT - tristate - default n - source "arch/um/Kconfig.debug" diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 423fd56bf612..43643033a3ae 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -298,7 +298,7 @@ if RTC_LIB=n config RTC tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ - && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN + && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -346,7 +346,7 @@ config JS_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN + depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you @@ -490,7 +490,7 @@ config SCx200_GPIO config PC8736x_GPIO tristate "NatSemi PC8736x GPIO Support" - depends on X86_32 + depends on X86_32 && !UML default SCx200_GPIO # mostly N select NSC_GPIO # needed for support routines help diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index a1f68af4ccf4..f22861511909 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -170,7 +170,7 @@ static const struct tty_operations ttyprintk_ops = { .ioctl = tpk_ioctl, }; -struct tty_port_operations null_ops = { }; +static struct tty_port_operations null_ops = { }; static struct tty_driver *ttyprintk_driver; diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 23e82e46656d..001b147c7f95 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -3,7 +3,7 @@ # menu "Input device support" - depends on !S390 + depends on !S390 && !UML config INPUT tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index 4fb601670de3..a233ed53913a 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -5,7 +5,7 @@ menuconfig ISDN bool "ISDN support" depends on NET - depends on !S390 + depends on !S390 && !UML ---help--- ISDN ("Integrated Services Digital Network", called RNIS in France) is a fully digital telephone service that can be used for voice and diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 57de051a74b3..9f88641e67f9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -70,6 +70,7 @@ config BATTERY_DS2760 config BATTERY_DS2780 tristate "DS2780 battery driver" + depends on HAS_IOMEM select W1 select W1_SLAVE_DS2780 help diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 5a538fc1cc85..53eb4e55b289 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -8,7 +8,7 @@ config RTC_LIB menuconfig RTC_CLASS bool "Real Time Clock" default n - depends on !S390 + depends on !S390 && !UML select RTC_LIB help Generic RTC class support. If you say yes here, you will diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index bd7cc0527999..aa07914a9cba 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -1,6 +1,6 @@ config VT bool "Virtual terminal" if EXPERT - depends on !S390 + depends on !S390 && !UML select INPUT default y ---help--- diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 340b2b3e15d6..64c6752ea2c6 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -726,7 +726,7 @@ config SBC8360_WDT config SBC7240_WDT tristate "SBC Nano 7240 Watchdog Timer" - depends on X86_32 + depends on X86_32 && !UML ---help--- This is the driver for the hardware watchdog found on the IEI single board computers EPIC Nano 7240 (and likely others). This diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig index b6ecfd4d8d78..5294d7384525 100644 --- a/security/integrity/ima/Kconfig +++ b/security/integrity/ima/Kconfig @@ -8,7 +8,7 @@ config IMA select CRYPTO_HMAC select CRYPTO_MD5 select CRYPTO_SHA1 - select TCG_TPM if !S390 + select TCG_TPM if !S390 && !UML select TCG_TIS if TCG_TPM help The Trusted Computing Group(TCG) runtime Integrity diff --git a/sound/Kconfig b/sound/Kconfig index 1fef141ef8e7..261a03c8a209 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -59,7 +59,7 @@ config SOUND_OSS_CORE_PRECLAIM source "sound/oss/dmasound/Kconfig" -if !M68K +if !M68K && !UML menuconfig SND tristate "Advanced Linux Sound Architecture" -- cgit v1.2.3 From b42c909743595208f7987e331f0921b73af2ce25 Mon Sep 17 00:00:00 2001 From: Tomas Miljenović Date: Fri, 4 Nov 2011 23:59:49 -0700 Subject: Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042 timeout data. Booting with i8042.notimeout and i8042.nomux successfully works around the problem. This patch adds the devices to the i8042 notimeout and nomux blacklists. Signed-off-by: Tomas Miljenovic Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/input') diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index bb9f5d31f0d0..b4cfc6c8be89 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -431,6 +431,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; @@ -560,6 +567,13 @@ static const struct dmi_system_id __initconst i8042_dmi_notimeout_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), }, }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + }, { } }; -- cgit v1.2.3 From 3940d6185a982a970ff562e085caccbdd62f40bb Mon Sep 17 00:00:00 2001 From: JJ Ding Date: Tue, 8 Nov 2011 22:13:14 -0800 Subject: Input: elantech - adjust hw_version detection logic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes some v3 hardware (fw_version: 0x150500) wrongly detected as v2 hardware. Reported-by: Marc Dietrich Signed-off-by: JJ Ding Tested-By: Marc Dietrich Acked-by: Éric Piel Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/input') diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 09b93b11a274..e2a9867c19d5 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1210,18 +1210,28 @@ static int elantech_reconnect(struct psmouse *psmouse) */ static int elantech_set_properties(struct elantech_data *etd) { + /* This represents the version of IC body. */ int ver = (etd->fw_version & 0x0f0000) >> 16; + /* Early version of Elan touchpads doesn't obey the rule. */ if (etd->fw_version < 0x020030 || etd->fw_version == 0x020600) etd->hw_version = 1; - else if (etd->fw_version < 0x150600) - etd->hw_version = 2; - else if (ver == 5) - etd->hw_version = 3; - else if (ver == 6) - etd->hw_version = 4; - else - return -1; + else { + switch (ver) { + case 2: + case 4: + etd->hw_version = 2; + break; + case 5: + etd->hw_version = 3; + break; + case 6: + etd->hw_version = 4; + break; + default: + return -1; + } + } /* * Turn on packet checking by default. -- cgit v1.2.3 From 77f6ca5a6283a5d34c4bd9dc809fec9e37fdd80d Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 9 Nov 2011 10:13:33 -0800 Subject: Input: ams_delta_serio - include linux/module.h Fix the following compilation failure with v3.2-rc1 by including module.h: CC drivers/input/serio/ams_delta_serio.o drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init': drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function) drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Aaro Koskinen Signed-off-by: Dmitry Torokhov --- drivers/input/serio/ams_delta_serio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/input') diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c index 4b2a42f9f0bb..d4d08bd9205b 100644 --- a/drivers/input/serio/ams_delta_serio.c +++ b/drivers/input/serio/ams_delta_serio.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3