From 839fcaba355abaffb7b44f0f4504093acb0b11cf Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 5 Feb 2007 22:12:23 +0200 Subject: IPoIB: Connected mode experimental support The following patch adds experimental support for IPoIB connected mode, as defined by the draft from the IETF ipoib working group. The idea is to increase performance by increasing the MTU from the maximum of 2K (theoretically 4K) supported by IPoIB on top of UD. With this code, I'm able to get 800MByte/sec or more with netperf without options on a Mellanox 4x back-to-back DDR system. Some notes on code: 1. SRQ is used for scalability to large cluster sizes 2. Only RC connections are used (UC does not support SRQ now) 3. Retry count is set to 0 since spec draft warns against retries 4. Each connection is used for data transfers in only 1 direction, so each connection is either active(TX) or passive (RX). 2 sides that want to communicate create 2 connections. 5. Each active (TX) connection has a separate CQ for send completions - this keeps the code simple without CQ resize and other tricks 6. To detect stale passive side connections (where the remote side is down), we keep an LRU list of passive connections (updated once per second per connection) and destroy a connection after it has been unused for several seconds. The LRU rule makes it possible to avoid scanning connections that have recently been active. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 40 ++++++++++++++++++------------ 1 file changed, 24 insertions(+), 16 deletions(-) (limited to 'drivers/infiniband/ulp/ipoib/ipoib_verbs.c') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 7b717c648f72..3cb551b88756 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -168,35 +168,41 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) .qp_type = IB_QPT_UD }; + int ret, size; + priv->pd = ib_alloc_pd(priv->ca); if (IS_ERR(priv->pd)) { printk(KERN_WARNING "%s: failed to allocate PD\n", ca->name); return -ENODEV; } - priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, - ipoib_sendq_size + ipoib_recvq_size + 1); + priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); + if (IS_ERR(priv->mr)) { + printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); + goto out_free_pd; + } + + size = ipoib_sendq_size + ipoib_recvq_size + 1; + ret = ipoib_cm_dev_init(dev); + if (!ret) + size += ipoib_recvq_size; + + priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size); if (IS_ERR(priv->cq)) { printk(KERN_WARNING "%s: failed to create CQ\n", ca->name); - goto out_free_pd; + goto out_free_mr; } if (ib_req_notify_cq(priv->cq, IB_CQ_NEXT_COMP)) goto out_free_cq; - priv->mr = ib_get_dma_mr(priv->pd, IB_ACCESS_LOCAL_WRITE); - if (IS_ERR(priv->mr)) { - printk(KERN_WARNING "%s: ib_get_dma_mr failed\n", ca->name); - goto out_free_cq; - } - init_attr.send_cq = priv->cq; init_attr.recv_cq = priv->cq, priv->qp = ib_create_qp(priv->pd, &init_attr); if (IS_ERR(priv->qp)) { printk(KERN_WARNING "%s: failed to create QP\n", ca->name); - goto out_free_mr; + goto out_free_cq; } priv->dev->dev_addr[1] = (priv->qp->qp_num >> 16) & 0xff; @@ -212,12 +218,12 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) return 0; -out_free_mr: - ib_dereg_mr(priv->mr); - out_free_cq: ib_destroy_cq(priv->cq); +out_free_mr: + ib_dereg_mr(priv->mr); + out_free_pd: ib_dealloc_pd(priv->pd); return -ENODEV; @@ -235,12 +241,14 @@ void ipoib_transport_dev_cleanup(struct net_device *dev) clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); } - if (ib_dereg_mr(priv->mr)) - ipoib_warn(priv, "ib_dereg_mr failed\n"); - if (ib_destroy_cq(priv->cq)) ipoib_warn(priv, "ib_cq_destroy failed\n"); + ipoib_cm_dev_cleanup(dev); + + if (ib_dereg_mr(priv->mr)) + ipoib_warn(priv, "ib_dereg_mr failed\n"); + if (ib_dealloc_pd(priv->pd)) ipoib_warn(priv, "ib_dealloc_pd failed\n"); } -- cgit v1.2.3