From f75d4a238770d83d3a0475ce7f34e3fa37de161e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 5 Jan 2010 07:07:27 +0000 Subject: icside: bring back ->maskproc method Bring back ->maskproc method since it is still needed for proper operation, as noticed by Russell King: > This change is bogus. > > writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); > readb(base + ICS_ARCIN_V6_INTROFFSET_2); > > writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); > readb(base + ICS_ARCIN_V6_INTROFFSET_1); > > This sequence of code does: > > 1. enable interrupt 1 > 2. disable interrupt 2 > 3. enable interrupt 2 > 4. disable interrupt 1 > > which results in the interrupt for the second channel being enabled - > leaving channel 1 blocked. > > Firstly, icside shares its two IDE channels with one DMA engine - so it's > a simplex interface. IDE supports those (or did when the code was written) > serializing requests between the two interfaces. libata does not. > > Secondly, the interrupt lines on icside float when there's no drive connected > or when the drive has its NIEN bit set, which means that you get spurious > screaming interrupts which can kill off all expansion card interrupts on > the machine unless you disable the channel interrupt on the card. > > Since libata can not serialize the operation of the two channels like IDE > can, the libata version of the icside driver does not contain the interrupt > stearing logic. Instead, it looks at the status after reset, and if > nothing was found on that channel, it masks the interrupt from that > channel. This patch reverts changes done in commit dff8817 (I became confused due to non-standard & undocumented ->maskproc method, anyway sorry about that). Noticed-by: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/icside.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 60 insertions(+), 4 deletions(-) (limited to 'drivers/ide/icside.c') diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 0f67f1abbbd3..d7e6f09aa86b 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = { }; struct icside_state { + unsigned int channel; + unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; unsigned int sel; @@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) struct icside_state *state = ec->irq_data; void __iomem *base = state->irq_port; - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); - readb(base + ICS_ARCIN_V6_INTROFFSET_2); + state->enabled = 1; - writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); - readb(base + ICS_ARCIN_V6_INTROFFSET_1); + switch (state->channel) { + case 0: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); + readb(base + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); + readb(base + ICS_ARCIN_V6_INTROFFSET_1); + break; + } } /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) @@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) { struct icside_state *state = ec->irq_data; + state->enabled = 0; + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); } @@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { .irqpending = icside_irqpending_arcin_v6, }; +/* + * Handle routing of interrupts. This is called before + * we write the command to the drive. + */ +static void icside_maskproc(ide_drive_t *drive, int mask) +{ + ide_hwif_t *hwif = drive->hwif; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); + unsigned long flags; + + local_irq_save(flags); + + state->channel = hwif->channel; + + if (state->enabled && !mask) { + switch (hwif->channel) { + case 0: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + break; + case 1: + writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + break; + } + } else { + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); + readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); + } + + local_irq_restore(flags); +} + +static const struct ide_port_ops icside_v6_no_dma_port_ops = { + .maskproc = icside_maskproc, +}; + #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. @@ -228,6 +277,7 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) static const struct ide_port_ops icside_v6_port_ops = { .set_dma_mode = icside_set_dma_mode, + .maskproc = icside_maskproc, }; static void icside_dma_host_set(ide_drive_t *drive, int on) @@ -271,6 +321,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) */ BUG_ON(dma_channel_active(ec->dma)); + /* + * Ensure that we have the right interrupt routed. + */ + icside_maskproc(drive, 0); + /* * Route the DMA signals to the correct interface. */ @@ -399,6 +454,7 @@ err_free: static const struct ide_port_info icside_v6_port_info __initdata = { .init_dma = icside_dma_off_init, + .port_ops = &icside_v6_no_dma_port_ops, .dma_ops = &icside_v6_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, .mwdma_mask = ATA_MWDMA2, -- cgit v1.2.3