From e693810ce8495ce3e227dacaa83f501b3b8ab204 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 13 Oct 2006 16:56:28 +0200 Subject: hwmon: Let w83781d and lm78 load again Let the w83781d and lm78 hardware monitoring drivers load even when no chip was detected at the ISA address. There can still be supported chips connected to an I2C bus or SMBus. This fixes bug #7293. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-isa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 4380653748a4..8ed59a2dff53 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -91,7 +91,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Now look for clients */ res = driver->attach_adapter(&isa_adapter); if (res) { - dev_err(&isa_adapter.dev, + dev_dbg(&isa_adapter.dev, "Driver %s failed to attach adapter, unregistering\n", driver->driver.name); driver_unregister(&driver->driver); -- cgit v1.2.3 From 84b5abe69ff600a559e1a1fa29f1edad707d4e2f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 28 Oct 2006 22:30:17 +0100 Subject: [ARM] Fix i2c-pxa slave mode support i2c-pxa times out when trying to enable slave mode due to an incorrect test. Also, check that i2c->slave is non-NULL before dereferencing it. Signed-off-by: Russell King --- drivers/i2c/busses/i2c-pxa.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 81050d3c9b21..c95a6c154165 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -272,7 +272,8 @@ static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, (long)jiffies, ISR, ICR, IBMR); - if ((ISR & (ISR_UB|ISR_IBB|ISR_SAD)) == ISR_SAD || + if ((ISR & (ISR_UB|ISR_IBB)) == 0 || + (ISR & ISR_SAD) != 0 || (ICR & ICR_SCLE) == 0) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); @@ -492,7 +493,10 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (isr & ISR_BED) { /* what should we do here? */ } else { - int ret = i2c->slave->read(i2c->slave->data); + int ret = 0; + + if (i2c->slave != NULL) + ret = i2c->slave->read(i2c->slave->data); IDBR = ret; ICR |= ICR_TB; /* allow next byte */ -- cgit v1.2.3 From a6cd2d94e1072a5756b5e5ab647d3223cba7e555 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 18 Nov 2006 22:19:36 -0800 Subject: [PATCH] i2c-ixp4xx: fix ") != 0))" typo i2c_bit_add_bus() returns -E; -E != 0 => err = 1 probe fails with positive error code Signed-off-by: Alexey Dobriyan Cc: Deepak Saxena Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/i2c/busses/i2c-ixp4xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 1ce01fb0ac09..05fffb9415a2 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -137,7 +137,8 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->scl_pin, 0); gpio_line_set(gpio->sda_pin, 0); - if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { + err = i2c_bit_add_bus(&drv_data->adapter); + if (err != 0) printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); kfree(drv_data); -- cgit v1.2.3 From ffb3d1348605816de10d4e57281e02f606508b6c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 18 Nov 2006 22:19:39 -0800 Subject: [PATCH] scx200_acb: handle PCI errors Signed-off-by: Jeff Garzik Signed-off-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/i2c/busses/scx200_acb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 32aab0d34ee9..714bae780953 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -494,11 +494,12 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, iface->pdev = pdev; iface->bar = bar; - pci_enable_device_bars(iface->pdev, 1 << iface->bar); + rc = pci_enable_device_bars(iface->pdev, 1 << iface->bar); + if (rc) + goto errout_free; rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name); - - if (rc != 0) { + if (rc) { printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n", iface->bar); goto errout_free; -- cgit v1.2.3 From 0b1082efb92eedb28e982cfae526267ebdcf5622 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 23 Nov 2006 13:28:50 +0100 Subject: [PATCH] Fix i2c-ixp4xx compile (missing brace) Fix recent i2c-ixp4xx compilation breakage. Sorry for overlooking it. Signed-off-by: Jean Delvare Signed-off-by: Linus Torvalds --- drivers/i2c/busses/i2c-ixp4xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 05fffb9415a2..68fe863f9d54 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -138,7 +138,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->sda_pin, 0); err = i2c_bit_add_bus(&drv_data->adapter); - if (err != 0) + if (err) { printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); kfree(drv_data); -- cgit v1.2.3 From adbc2a102252994c36102008293b52760613d6c3 Mon Sep 17 00:00:00 2001 From: Jason Gaston Date: Wed, 22 Nov 2006 15:19:12 -0800 Subject: i2c-i801: SMBus patch for Intel ICH9 This updated patch adds the Intel ICH9 LPC and SMBus Controller DID's. Thi= s patch relies on the irq ICH9 patch to pci_ids.h. Signed-off-by: Jason Gaston Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 2 ++ 2 files changed, 3 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 510816c16da3..04bee524e31a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -125,6 +125,7 @@ config I2C_I801 ICH7 ESB2 ICH8 + ICH9 This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index bbb2fbee836f..c7be2fdbd86b 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -33,6 +33,7 @@ ICH7 27DA ESB2 269B ICH8 283E + ICH9 2930 This driver supports several versions of Intel's I/O Controller Hubs (ICH). For SMBus support, they are similar to the PIIX4 and are part of Intel's '810' and other chipsets. @@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, { 0, } }; -- cgit v1.2.3 From ac11d0601bbe73c92e31b393eeb1225593788d4c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 3 Jul 2006 13:46:24 -0700 Subject: I2C: convert i2c-dev to use struct device instead of struct class_device As class_device is going away eventually... Cc: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-dev.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 3f869033ed70..94a4e9a3013c 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -42,7 +42,7 @@ static struct i2c_driver i2cdev_driver; struct i2c_dev { struct list_head list; struct i2c_adapter *adap; - struct class_device *class_dev; + struct device *dev; }; #define I2C_MINORS 256 @@ -92,15 +92,16 @@ static void return_i2c_dev(struct i2c_dev *i2c_dev) spin_unlock(&i2c_dev_list_lock); } -static ssize_t show_adapter_name(struct class_device *class_dev, char *buf) +static ssize_t show_adapter_name(struct device *dev, + struct device_attribute *attr, char *buf) { - struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(class_dev->devt)); + struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt)); if (!i2c_dev) return -ENODEV; return sprintf(buf, "%s\n", i2c_dev->adap->name); } -static CLASS_DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); +static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, loff_t *offset) @@ -413,15 +414,14 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) return PTR_ERR(i2c_dev); /* register this i2c device with the driver core */ - i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL, - MKDEV(I2C_MAJOR, adap->nr), - &adap->dev, "i2c-%d", - adap->nr); - if (!i2c_dev->class_dev) { + i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, + MKDEV(I2C_MAJOR, adap->nr), + "i2c-%d", adap->nr); + if (!i2c_dev->dev) { res = -ENODEV; goto error; } - res = class_device_create_file(i2c_dev->class_dev, &class_device_attr_name); + res = device_create_file(i2c_dev->dev, &dev_attr_name); if (res) goto error_destroy; @@ -429,7 +429,7 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) adap->name, adap->nr); return 0; error_destroy: - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); error: return_i2c_dev(i2c_dev); kfree(i2c_dev); @@ -444,9 +444,9 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) if (!i2c_dev) /* attach_adapter must have failed */ return 0; - class_device_remove_file(i2c_dev->class_dev, &class_device_attr_name); + device_remove_file(i2c_dev->dev, &dev_attr_name); return_i2c_dev(i2c_dev); - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); kfree(i2c_dev); pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); -- cgit v1.2.3