From 8e5f6b2a289c4374456fb785900b0b7445b719e6 Mon Sep 17 00:00:00 2001 From: Romain Baeriswyl Date: Wed, 20 Aug 2014 16:29:08 +0200 Subject: i2c: designware: add support of I2C standard mode Some legacy devices support ony I2C standard mode at 100kHz. This patch allows to select the standard mode through the DTS with the use of the existing clock-frequency parameter. When clock-frequency parameter is not set, the fast mode is selected. Only when the parameter is set at 100000, the standard mode is selected. Signed-off-by: Romain Baeriswyl Reviewed-by: Christian Ruppert Acked-by: Alan Tull Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index bc8773333155..8193e8eea764 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -123,6 +123,7 @@ static int dw_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *mem; int irq, r; + u32 clk_freq; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -152,6 +153,9 @@ static int dw_i2c_probe(struct platform_device *pdev) return PTR_ERR(dev->clk); clk_prepare_enable(dev->clk); + /* fast mode by default because of legacy reasons */ + clk_freq = 400000; + if (pdev->dev.of_node) { u32 ht = 0; u32 ic_clk = dev->get_clk_rate_khz(dev); @@ -167,6 +171,17 @@ static int dw_i2c_probe(struct platform_device *pdev) of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", &dev->scl_falling_time); + + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clk_freq); + + /* Only standard mode at 100kHz and fast mode at 400kHz + * are supported. + */ + if (clk_freq != 100000 && clk_freq != 400000) { + dev_err(&pdev->dev, "Only 100kHz and 400kHz supported"); + return -EINVAL; + } } dev->functionality = @@ -176,8 +191,12 @@ static int dw_i2c_probe(struct platform_device *pdev) I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; + if (clk_freq == 100000) + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD; + else + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; /* Try first if we can configure the device from ACPI */ r = dw_i2c_acpi_configure(pdev); -- cgit v1.2.3 From 4bcfda09936da647b0a3b49d5dcb3c6c6ebb0395 Mon Sep 17 00:00:00 2001 From: "Tan, Raymond" Date: Wed, 3 Sep 2014 10:41:38 +0800 Subject: i2c: designware: add support of platform data to set I2C mode Use the platform data to set the clk_freq when there is no DT configuration available. The clk_freq in turn will determine the I2C speed mode. In Quark, there is currently no other configuration mechanism other than board files. Signed-off-by: Raymond Tan Reviewed-by: Mika Westerberg Reviewed-by: Hock Leong Kweh Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 6 ++++++ include/linux/platform_data/i2c-designware.h | 21 +++++++++++++++++++++ 2 files changed, 27 insertions(+) create mode 100644 include/linux/platform_data/i2c-designware.h (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 8193e8eea764..4d6a6b94e2fa 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "i2c-designware-core.h" static struct i2c_algorithm i2c_dw_algo = { @@ -122,6 +123,7 @@ static int dw_i2c_probe(struct platform_device *pdev) struct dw_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem; + struct dw_i2c_platform_data *pdata; int irq, r; u32 clk_freq; @@ -182,6 +184,10 @@ static int dw_i2c_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Only 100kHz and 400kHz supported"); return -EINVAL; } + } else { + pdata = dev_get_platdata(&pdev->dev); + if (pdata) + clk_freq = pdata->i2c_scl_freq; } dev->functionality = diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h new file mode 100644 index 000000000000..7a61fb27c25b --- /dev/null +++ b/include/linux/platform_data/i2c-designware.h @@ -0,0 +1,21 @@ +/* + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef I2C_DESIGNWARE_H +#define I2C_DESIGNWARE_H + +struct dw_i2c_platform_data { + unsigned int i2c_scl_freq; +}; + +#endif -- cgit v1.2.3 From c30d7662d81062cbc25e5ff50be8dbaca3a1f20a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 15 Sep 2014 00:14:14 +0400 Subject: i2c: rcar: simplify check for last message rcar_i2c_master_xfer() needlessly compares the message pointers (using indirect addressing) in order to detect the last I2C message, while it's enough to only compare the message indexes. Signed-off-by: Sergei Shtylyov Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index e506fcd3ca04..98125fb0f3fe 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -453,7 +453,7 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, priv->msg = &msgs[i]; priv->pos = 0; priv->flags = 0; - if (priv->msg == &msgs[num - 1]) + if (i == num - 1) rcar_i2c_flags_set(priv, ID_LAST_MSG); ret = rcar_i2c_prepare_msg(priv); -- cgit v1.2.3 From 7c7117ffe08fd54d4129e378b46a812c717bae48 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 15 Sep 2014 00:15:46 +0400 Subject: i2c: rcar: make rcar_i2c_prepare_msg() *void* rcar_i2c_prepare_msg() always returns 0, so we can make this function return *void* and thus remove the result check in rcar_i2c_master_xfer(). Signed-off-by: Sergei Shtylyov Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 98125fb0f3fe..c49b33e99d68 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -245,7 +245,7 @@ scgd_find: return 0; } -static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) +static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) { int read = !!rcar_i2c_is_recv(priv); @@ -253,8 +253,6 @@ static int rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) rcar_i2c_write(priv, ICMSR, 0); rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START); rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND); - - return 0; } /* @@ -456,14 +454,11 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, if (i == num - 1) rcar_i2c_flags_set(priv, ID_LAST_MSG); - ret = rcar_i2c_prepare_msg(priv); + rcar_i2c_prepare_msg(priv); spin_unlock_irqrestore(&priv->lock, flags); /*-------------- spin unlock -----------------*/ - if (ret < 0) - break; - timeout = wait_event_timeout(priv->wait, rcar_i2c_flags_has(priv, ID_DONE), 5 * HZ); -- cgit v1.2.3 From aa5beaf62588d095398415af5d0e14c79e2478a3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 15 Sep 2014 00:20:19 +0400 Subject: i2c: rcar: check for no IRQ in rcar_i2c_irq() Check if the ICMSR register (masked with the ICMIER register) evaluates to 0 in the driver's interrupt handler and return IRQ_NONE in that case, like many other drivers do. Signed-off-by: Sergei Shtylyov Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index c49b33e99d68..b694cba63807 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -363,6 +363,7 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr) static irqreturn_t rcar_i2c_irq(int irq, void *ptr) { struct rcar_i2c_priv *priv = ptr; + irqreturn_t result = IRQ_HANDLED; u32 msr; /*-------------- spin lock -----------------*/ @@ -372,6 +373,10 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr) /* Only handle interrupts that are currently enabled */ msr &= rcar_i2c_read(priv, ICMIER); + if (!msr) { + result = IRQ_NONE; + goto exit; + } /* Arbitration lost */ if (msr & MAL) { @@ -406,10 +411,11 @@ out: wake_up(&priv->wait); } +exit: spin_unlock(&priv->lock); /*-------------- spin unlock -----------------*/ - return IRQ_HANDLED; + return result; } static int rcar_i2c_master_xfer(struct i2c_adapter *adap, -- cgit v1.2.3 From 29209338b22a61c9ba67badd5f36e96cda1892d8 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Fri, 22 Aug 2014 10:43:44 -0700 Subject: i2c: rk3x: Remove unlikely() annotations Having a transfer more than 32 bits is not all that unlikely. Remove the annotation. The unlikely in the IRQ handler can't gain us much. It's not in a loop, so at most it would save 1 instruction per IRQ, which isn't much. In fact on the compiler I tested it produced the exact same code. Remove it too. Suggested-by: Dmitry Torokhov Signed-off-by: Doug Anderson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rk3x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 93cfc837200b..b41d97965669 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -208,7 +208,7 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) * The hw can read up to 32 bytes at a time. If we need more than one * chunk, send an ACK after the last byte of the current chunk. */ - if (unlikely(len > 32)) { + if (len > 32) { len = 32; con &= ~REG_CON_LASTACK; } else { @@ -403,7 +403,7 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id) } /* is there anything left to handle? */ - if (unlikely((ipd & REG_INT_ALL) == 0)) + if ((ipd & REG_INT_ALL) == 0) goto out; switch (i2c->state) { -- cgit v1.2.3 From 639a26cf0771cb5a4d61a0f7777882cbda989753 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 3 Sep 2014 13:52:07 +0800 Subject: i2c: imx: Add arbitration lost check According to the i.mx spec, for multimaster mode, if I2C is enabled when the bus is busy and asserts start, hardware inhibits the transmission, clears MSTA without signaling a stop, generate an interrupt, and set I2C_I2SR[IAL] to indicate a failed attempt to engage the bus, which means arbitration lost. In this case, we should first test I2C_I2SR[IAL], and clear this bit if it is set, and then I2C controller default to slave receive mode. This patch check the IAL bit every time before an I2c transmission. if IAL is set, clear it and make I2C controller to default mode. Signed-off-by: Haibo Chen Acked-by: Fugang Duan Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 613069bc561a..ceff87cec18e 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -268,6 +268,14 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) while (1) { temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR); + + /* check for arbitration lost */ + if (temp & I2SR_IAL) { + temp &= ~I2SR_IAL; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + return -EAGAIN; + } + if (for_busy && (temp & I2SR_IBB)) break; if (!for_busy && !(temp & I2SR_IBB)) -- cgit v1.2.3 From 8b57cebedd3e8a384ab678a69e9b7128eb438a1f Mon Sep 17 00:00:00 2001 From: Fan Du Date: Tue, 16 Sep 2014 17:21:03 +0800 Subject: i2c: ismt: Use minimum descriptor size Software is allowed to allocate number of descriptor size from 2 to 256, this i2c controller could process more descriptor, but for i2c core soft ware layer, only one i2c transaction is allowed each time. So here switch to minimum 2 descriptor when initialization. Signed-off-by: Fan Du Acked-by: Neil Horman Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ismt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index d9ee43c80cde..3f6ecbfb9a56 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -81,7 +81,7 @@ #define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a #define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15 -#define ISMT_DESC_ENTRIES 32 /* number of descriptor entries */ +#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */ #define ISMT_MAX_RETRIES 3 /* number of SMBus retries to attempt */ /* Hardware Descriptor Constants - Control Field */ -- cgit v1.2.3 From 22762ccb0ef02a8fbdde09046d7095d46f3b7095 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 20 Sep 2014 12:07:37 +0200 Subject: i2c: rcar: remove sign-compare flaw gcc rightfully says: drivers/i2c/busses/i2c-rcar.c:198:10: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Wolfram Sang Acked-by: Laurent Pinchart Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-rcar.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index b694cba63807..d826e82dd997 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -195,7 +195,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, */ rate = clk_get_rate(priv->clk); cdf = rate / 20000000; - if (cdf >= 1 << cdf_width) { + if (cdf >= 1U << cdf_width) { dev_err(dev, "Input clock %lu too high\n", rate); return -EIO; } -- cgit v1.2.3 From 6c97c9c1acfce89cce2f239f0325786f95aea848 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Fri, 19 Sep 2014 10:08:12 +0200 Subject: i2c: cros-ec-tunnel: Add of match table To enable the cros-ec-tunnel driver to be auto-loaded when build as a module add an of match table (and export it) to match the modalias information passed on to userspace as the Cros EC MFD driver registers the MFD subdevices with an of_compatibility string. Signed-off-by: Sjoerd Simons Reviewed-by: Javier Martinez Canillas Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cros-ec-tunnel.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index 05e033c98115..0403ec1dc3b5 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -310,11 +310,20 @@ static int ec_i2c_remove(struct platform_device *dev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id cros_ec_i2c_of_match[] = { + { .compatible = "google,cros-ec-i2c-tunnel" }, + {}, +}; +MODULE_DEVICE_TABLE(of, cros_ec_i2c_of_match); +#endif + static struct platform_driver ec_i2c_tunnel_driver = { .probe = ec_i2c_probe, .remove = ec_i2c_remove, .driver = { .name = "cros-ec-i2c-tunnel", + .of_match_table = of_match_ptr(cros_ec_i2c_of_match), }, }; -- cgit v1.2.3 From d8e0a86f9713689e35dc14f7184e85a13a2a9f4e Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Mon, 23 Jun 2014 14:20:06 -0700 Subject: i2c: cros_ec: Remove EC_I2C_FLAG_10BIT In pointed out that the 10-bit flag in the cros_ec_tunnel was useless. It went into a 16-bit flags field but was defined at (1 << 16). Since we have no 10-bit i2c devices on the other side of the tunnel on any known devices this was never a problem. Until we do it makes sense to remove this code. On the EC side the code to handle this flag was removed in . Reported-by: Dave Jones Signed-off-by: Doug Anderson Reviewed-by: Simon Glass Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cros-ec-tunnel.c | 6 ++++-- include/linux/mfd/cros_ec_commands.h | 3 --- 2 files changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index 0403ec1dc3b5..fc89c13b1632 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -94,7 +94,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[], msg->addr_flags = i2c_msg->addr; if (i2c_msg->flags & I2C_M_TEN) - msg->addr_flags |= EC_I2C_FLAG_10BIT; + return -EINVAL; if (i2c_msg->flags & I2C_M_RD) { msg->addr_flags |= EC_I2C_FLAG_READ; @@ -218,7 +218,9 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], } } - ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + result = ec_i2c_construct_message(request, i2c_msgs, num, bus_num); + if (result) + goto exit; msg.version = 0; msg.command = EC_CMD_I2C_PASSTHRU; diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 7853a6410d14..a49cd41feea7 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -1928,9 +1928,6 @@ struct ec_response_power_info { #define EC_CMD_I2C_PASSTHRU 0x9e -/* Slave address is 10 (not 7) bit */ -#define EC_I2C_FLAG_10BIT (1 << 16) - /* Read data; if not present, message is a write */ #define EC_I2C_FLAG_READ (1 << 15) -- cgit v1.2.3 From 030f940a535433605e6b4ee43f36189e5cace022 Mon Sep 17 00:00:00 2001 From: Janusz Użycki Date: Tue, 23 Sep 2014 12:48:26 +0200 Subject: i2c: mxs: detect No Slave Ack on SELECT in PIO mode i2cdetect scanned i2c bus slow because the i2c-mxs driver ignored the NO_SLAVE_ACK bit during busy-waiting loop. Thanks to the patch, the speedup happens. Signed-off-by: Janusz Uzycki Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 65a21fed08b5..07e1be6f8992 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -307,6 +307,9 @@ static int mxs_i2c_pio_wait_xfer_end(struct mxs_i2c_dev *i2c) unsigned long timeout = jiffies + msecs_to_jiffies(1000); while (readl(i2c->regs + MXS_I2C_CTRL0) & MXS_I2C_CTRL0_RUN) { + if (readl(i2c->regs + MXS_I2C_CTRL1) & + MXS_I2C_CTRL1_NO_SLAVE_ACK_IRQ) + return -ENXIO; if (time_after(jiffies, timeout)) return -ETIMEDOUT; cond_resched(); -- cgit v1.2.3 From 2374a5399b7263eb1afc6b5522a56ebf9f0b8636 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Ch Date: Tue, 16 Sep 2014 15:03:17 +0530 Subject: i2c: exynos: add support for HSI2C module on Exynos7 The HSI2C module on Exynos7 differs in the transfer status bits. Transfer status bits were moved to INT_ENABLE and INT_STATUS registers This patch adds support for the HSI2C module on Exynos7. 1. Implementes a "hw" field in the variant struct to distinguish the hardware. 2. Updates the dt-new compatible in dt-binding documenation Signed-off-by: Naveen Krishna Chatradhi Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-exynos5.txt | 2 + drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-exynos5.c | 71 ++++++++++++++++++++-- 3 files changed, 68 insertions(+), 7 deletions(-) (limited to 'drivers/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt index d4745e31f5c6..2dbc0b62daa6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt @@ -12,6 +12,8 @@ Required properties: on Exynos5250 and Exynos5420 SoCs. -> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available on Exynos5260 SoCs. + -> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available + on Exynos7 SoCs. - reg: physical base address of the controller and length of memory mapped region. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2ac87fa3058d..1f3b9cb1faa7 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -465,7 +465,7 @@ config I2C_EG20T config I2C_EXYNOS5 tristate "Exynos5 high-speed I2C driver" - depends on ARCH_EXYNOS5 && OF + depends on ARCH_EXYNOS && OF default y help High-speed I2C controller on Exynos5 based Samsung SoCs. diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c index 28073f1d6d47..81e6263cd7da 100644 --- a/drivers/i2c/busses/i2c-exynos5.c +++ b/drivers/i2c/busses/i2c-exynos5.c @@ -83,7 +83,6 @@ #define HSI2C_INT_TX_ALMOSTEMPTY_EN (1u << 0) #define HSI2C_INT_RX_ALMOSTFULL_EN (1u << 1) #define HSI2C_INT_TRAILING_EN (1u << 6) -#define HSI2C_INT_I2C_EN (1u << 9) /* I2C_INT_STAT Register bits */ #define HSI2C_INT_TX_ALMOSTEMPTY (1u << 0) @@ -95,6 +94,17 @@ #define HSI2C_INT_TRAILING (1u << 6) #define HSI2C_INT_I2C (1u << 9) +#define HSI2C_INT_TRANS_DONE (1u << 7) +#define HSI2C_INT_TRANS_ABORT (1u << 8) +#define HSI2C_INT_NO_DEV_ACK (1u << 9) +#define HSI2C_INT_NO_DEV (1u << 10) +#define HSI2C_INT_TIMEOUT (1u << 11) +#define HSI2C_INT_I2C_TRANS (HSI2C_INT_TRANS_DONE | \ + HSI2C_INT_TRANS_ABORT | \ + HSI2C_INT_NO_DEV_ACK | \ + HSI2C_INT_NO_DEV | \ + HSI2C_INT_TIMEOUT) + /* I2C_FIFO_STAT Register bits */ #define HSI2C_RX_FIFO_EMPTY (1u << 24) #define HSI2C_RX_FIFO_FULL (1u << 23) @@ -143,6 +153,8 @@ #define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000)) +#define HSI2C_EXYNOS7 BIT(0) + struct exynos5_i2c { struct i2c_adapter adap; unsigned int suspended:1; @@ -192,6 +204,7 @@ struct exynos5_i2c { */ struct exynos_hsi2c_variant { unsigned int fifo_depth; + unsigned int hw; }; static const struct exynos_hsi2c_variant exynos5250_hsi2c_data = { @@ -202,6 +215,11 @@ static const struct exynos_hsi2c_variant exynos5260_hsi2c_data = { .fifo_depth = 16, }; +static const struct exynos_hsi2c_variant exynos7_hsi2c_data = { + .fifo_depth = 16, + .hw = HSI2C_EXYNOS7, +}; + static const struct of_device_id exynos5_i2c_match[] = { { .compatible = "samsung,exynos5-hsi2c", @@ -212,6 +230,9 @@ static const struct of_device_id exynos5_i2c_match[] = { }, { .compatible = "samsung,exynos5260-hsi2c", .data = &exynos5260_hsi2c_data + }, { + .compatible = "samsung,exynos7-hsi2c", + .data = &exynos7_hsi2c_data }, {}, }; MODULE_DEVICE_TABLE(of, exynos5_i2c_match); @@ -256,13 +277,24 @@ static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode) i2c->hs_clock : i2c->fs_clock; /* + * In case of HSI2C controller in Exynos5 series * FPCLK / FI2C = * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE + * + * In case of HSI2C controllers in Exynos7 series + * FPCLK / FI2C = + * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + FLT_CYCLE + * * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) * utemp1 = (TSCLK_L + TSCLK_H + 2) */ t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7; - utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle; + utemp0 = (clkin / op_clk) - 8; + + if (i2c->variant->hw == HSI2C_EXYNOS7) + utemp0 -= t_ftl_cycle; + else + utemp0 -= 2 * t_ftl_cycle; /* CLK_DIV max is 256 */ for (div = 0; div < 256; div++) { @@ -407,7 +439,28 @@ static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id) writel(int_status, i2c->regs + HSI2C_INT_STATUS); /* handle interrupt related to the transfer status */ - if (int_status & HSI2C_INT_I2C) { + if (i2c->variant->hw == HSI2C_EXYNOS7) { + if (int_status & HSI2C_INT_TRANS_DONE) { + i2c->trans_done = 1; + i2c->state = 0; + } else if (int_status & HSI2C_INT_TRANS_ABORT) { + dev_dbg(i2c->dev, "Deal with arbitration lose\n"); + i2c->state = -EAGAIN; + goto stop; + } else if (int_status & HSI2C_INT_NO_DEV_ACK) { + dev_dbg(i2c->dev, "No ACK from device\n"); + i2c->state = -ENXIO; + goto stop; + } else if (int_status & HSI2C_INT_NO_DEV) { + dev_dbg(i2c->dev, "No device\n"); + i2c->state = -ENXIO; + goto stop; + } else if (int_status & HSI2C_INT_TIMEOUT) { + dev_dbg(i2c->dev, "Accessing device timed out\n"); + i2c->state = -EAGAIN; + goto stop; + } + } else if (int_status & HSI2C_INT_I2C) { trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS); if (trans_status & HSI2C_NO_DEV_ACK) { dev_dbg(i2c->dev, "No ACK from device\n"); @@ -512,12 +565,17 @@ static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c) static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop) { u32 i2c_ctl; - u32 int_en = HSI2C_INT_I2C_EN; + u32 int_en = 0; u32 i2c_auto_conf = 0; u32 fifo_ctl; unsigned long flags; unsigned short trig_lvl; + if (i2c->variant->hw == HSI2C_EXYNOS7) + int_en |= HSI2C_INT_I2C_TRANS; + else + int_en |= HSI2C_INT_I2C; + i2c_ctl = readl(i2c->regs + HSI2C_CTL); i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON); fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN; @@ -724,12 +782,13 @@ static int exynos5_i2c_probe(struct platform_device *pdev) goto err_clk; } + /* Need to check the variant before setting up. */ + i2c->variant = exynos5_i2c_get_variant(pdev); + ret = exynos5_hsi2c_clock_setup(i2c); if (ret) goto err_clk; - i2c->variant = exynos5_i2c_get_variant(pdev); - exynos5_i2c_reset(i2c); ret = i2c_add_adapter(&i2c->adap); -- cgit v1.2.3 From 08678b850cd0c49cc49c7fed0c93f720f85368e8 Mon Sep 17 00:00:00 2001 From: Anders Berg Date: Fri, 3 Oct 2014 13:08:02 +0200 Subject: i2c: axxia: Add I2C driver for AXM55xx Add I2C bus driver for the controller found in the LSI Axxia family SoCs. The driver implements 10-bit addressing and SMBus transfer modes via emulation (including SMBus block data read). Signed-off-by: Anders Berg Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-axxia.txt | 30 ++ drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-axxia.c | 559 +++++++++++++++++++++ 4 files changed, 601 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-axxia.txt create mode 100644 drivers/i2c/busses/i2c-axxia.c (limited to 'drivers/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt new file mode 100644 index 000000000000..2296d782b4c2 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -0,0 +1,30 @@ +LSI Axxia I2C + +Required properties : +- compatible : Must be "lsi,api2c" +- reg : Offset and length of the register set for the device +- interrupts : the interrupt specifier +- #address-cells : Must be <1>; +- #size-cells : Must be <0>; +- clock-names : Must contain "i2c". +- clocks: Must contain an entry for each name in clock-names. See the common + clock bindings. + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. + +Example : + +i2c@02010084000 { + compatible = "lsi,api2c"; + device_type = "i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x20 0x10084000 0x00 0x1000>; + interrupts = <0 19 4>; + clocks = <&clk_per>; + clock-names = "i2c"; + clock-frequency = <400000>; +}; diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 1f3b9cb1faa7..e1d491b0b9c9 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -337,6 +337,17 @@ config I2C_AU1550 This driver can also be built as a module. If so, the module will be called i2c-au1550. +config I2C_AXXIA + tristate "Axxia I2C controller" + depends on ARCH_AXXIA || COMPILE_TEST + default ARCH_AXXIA + help + Say yes if you want to support the I2C bus on Axxia platforms. + + Please note that this controller is limited to transfers of maximum + 255 bytes in length. Any attempt to to a larger transfer will return + an error. + config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" depends on ARCH_BCM2835 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 49bf07e5ef4d..9fb33fab9bfd 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o # Embedded system I2C/SMBus host controller drivers obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o +obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c new file mode 100644 index 000000000000..768a598d8d03 --- /dev/null +++ b/drivers/i2c/busses/i2c-axxia.c @@ -0,0 +1,559 @@ +/* + * This driver implements I2C master functionality using the LSI API2C + * controller. + * + * NOTE: The controller has a limitation in that it can only do transfers of + * maximum 255 bytes at a time. If a larger transfer is attempted, error code + * (-EINVAL) is returned. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SCL_WAIT_TIMEOUT_NS 25000000 +#define I2C_XFER_TIMEOUT (msecs_to_jiffies(250)) +#define I2C_STOP_TIMEOUT (msecs_to_jiffies(100)) +#define FIFO_SIZE 8 + +#define GLOBAL_CONTROL 0x00 +#define GLOBAL_MST_EN BIT(0) +#define GLOBAL_SLV_EN BIT(1) +#define GLOBAL_IBML_EN BIT(2) +#define INTERRUPT_STATUS 0x04 +#define INTERRUPT_ENABLE 0x08 +#define INT_SLV BIT(1) +#define INT_MST BIT(0) +#define WAIT_TIMER_CONTROL 0x0c +#define WT_EN BIT(15) +#define WT_VALUE(_x) ((_x) & 0x7fff) +#define IBML_TIMEOUT 0x10 +#define IBML_LOW_MEXT 0x14 +#define IBML_LOW_SEXT 0x18 +#define TIMER_CLOCK_DIV 0x1c +#define I2C_BUS_MONITOR 0x20 +#define SOFT_RESET 0x24 +#define MST_COMMAND 0x28 +#define CMD_BUSY (1<<3) +#define CMD_MANUAL (0x00 | CMD_BUSY) +#define CMD_AUTO (0x01 | CMD_BUSY) +#define MST_RX_XFER 0x2c +#define MST_TX_XFER 0x30 +#define MST_ADDR_1 0x34 +#define MST_ADDR_2 0x38 +#define MST_DATA 0x3c +#define MST_TX_FIFO 0x40 +#define MST_RX_FIFO 0x44 +#define MST_INT_ENABLE 0x48 +#define MST_INT_STATUS 0x4c +#define MST_STATUS_RFL (1 << 13) /* RX FIFO serivce */ +#define MST_STATUS_TFL (1 << 12) /* TX FIFO service */ +#define MST_STATUS_SNS (1 << 11) /* Manual mode done */ +#define MST_STATUS_SS (1 << 10) /* Automatic mode done */ +#define MST_STATUS_SCC (1 << 9) /* Stop complete */ +#define MST_STATUS_IP (1 << 8) /* Invalid parameter */ +#define MST_STATUS_TSS (1 << 7) /* Timeout */ +#define MST_STATUS_AL (1 << 6) /* Arbitration lost */ +#define MST_STATUS_ND (1 << 5) /* NAK on data phase */ +#define MST_STATUS_NA (1 << 4) /* NAK on address phase */ +#define MST_STATUS_NAK (MST_STATUS_NA | \ + MST_STATUS_ND) +#define MST_STATUS_ERR (MST_STATUS_NAK | \ + MST_STATUS_AL | \ + MST_STATUS_IP | \ + MST_STATUS_TSS) +#define MST_TX_BYTES_XFRD 0x50 +#define MST_RX_BYTES_XFRD 0x54 +#define SCL_HIGH_PERIOD 0x80 +#define SCL_LOW_PERIOD 0x84 +#define SPIKE_FLTR_LEN 0x88 +#define SDA_SETUP_TIME 0x8c +#define SDA_HOLD_TIME 0x90 + +/** + * axxia_i2c_dev - I2C device context + * @base: pointer to register struct + * @msg: pointer to current message + * @msg_xfrd: number of bytes transferred in msg + * @msg_err: error code for completed message + * @msg_complete: xfer completion object + * @dev: device reference + * @adapter: core i2c abstraction + * @i2c_clk: clock reference for i2c input clock + * @bus_clk_rate: current i2c bus clock rate + */ +struct axxia_i2c_dev { + void __iomem *base; + struct i2c_msg *msg; + size_t msg_xfrd; + int msg_err; + struct completion msg_complete; + struct device *dev; + struct i2c_adapter adapter; + struct clk *i2c_clk; + u32 bus_clk_rate; +}; + +static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask) +{ + u32 int_en; + + int_en = readl(idev->base + MST_INT_ENABLE); + writel(int_en & ~mask, idev->base + MST_INT_ENABLE); +} + +static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask) +{ + u32 int_en; + + int_en = readl(idev->base + MST_INT_ENABLE); + writel(int_en | mask, idev->base + MST_INT_ENABLE); +} + +/** + * ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency. + */ +static u32 ns_to_clk(u64 ns, u32 clk_mhz) +{ + return div_u64(ns * clk_mhz, 1000); +} + +static int axxia_i2c_init(struct axxia_i2c_dev *idev) +{ + u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate; + u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000; + u32 t_setup; + u32 t_high, t_low; + u32 tmo_clk; + u32 prescale; + unsigned long timeout; + + dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n", + idev->bus_clk_rate, clk_mhz, divisor); + + /* Reset controller */ + writel(0x01, idev->base + SOFT_RESET); + timeout = jiffies + msecs_to_jiffies(100); + while (readl(idev->base + SOFT_RESET) & 1) { + if (time_after(jiffies, timeout)) { + dev_warn(idev->dev, "Soft reset failed\n"); + break; + } + } + + /* Enable Master Mode */ + writel(0x1, idev->base + GLOBAL_CONTROL); + + if (idev->bus_clk_rate <= 100000) { + /* Standard mode SCL 50/50, tSU:DAT = 250 ns */ + t_high = divisor * 1 / 2; + t_low = divisor * 1 / 2; + t_setup = ns_to_clk(250, clk_mhz); + } else { + /* Fast mode SCL 33/66, tSU:DAT = 100 ns */ + t_high = divisor * 1 / 3; + t_low = divisor * 2 / 3; + t_setup = ns_to_clk(100, clk_mhz); + } + + /* SCL High Time */ + writel(t_high, idev->base + SCL_HIGH_PERIOD); + /* SCL Low Time */ + writel(t_low, idev->base + SCL_LOW_PERIOD); + /* SDA Setup Time */ + writel(t_setup, idev->base + SDA_SETUP_TIME); + /* SDA Hold Time, 300ns */ + writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME); + /* Filter <50ns spikes */ + writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN); + + /* Configure Time-Out Registers */ + tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz); + + /* Find prescaler value that makes tmo_clk fit in 15-bits counter. */ + for (prescale = 0; prescale < 15; ++prescale) { + if (tmo_clk <= 0x7fff) + break; + tmo_clk >>= 1; + } + if (tmo_clk > 0x7fff) + tmo_clk = 0x7fff; + + /* Prescale divider (log2) */ + writel(prescale, idev->base + TIMER_CLOCK_DIV); + /* Timeout in divided clocks */ + writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL); + + /* Mask all master interrupt bits */ + i2c_int_disable(idev, ~0); + + /* Interrupt enable */ + writel(0x01, idev->base + INTERRUPT_ENABLE); + + return 0; +} + +static int i2c_m_rd(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_RD) != 0; +} + +static int i2c_m_ten(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_TEN) != 0; +} + +static int i2c_m_recv_len(const struct i2c_msg *msg) +{ + return (msg->flags & I2C_M_RECV_LEN) != 0; +} + +/** + * axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block + * transfer length if this is the first byte of such a transfer. + */ +static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev) +{ + struct i2c_msg *msg = idev->msg; + size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO); + int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd); + + while (bytes_to_transfer-- > 0) { + int c = readl(idev->base + MST_DATA); + + if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) { + /* + * Check length byte for SMBus block read + */ + if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) { + idev->msg_err = -EPROTO; + i2c_int_disable(idev, ~0); + complete(&idev->msg_complete); + break; + } + msg->len = 1 + c; + writel(msg->len, idev->base + MST_RX_XFER); + } + msg->buf[idev->msg_xfrd++] = c; + } + + return 0; +} + +/** + * axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer. + * @return: Number of bytes left to transfer. + */ +static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev) +{ + struct i2c_msg *msg = idev->msg; + size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO); + int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd); + int ret = msg->len - idev->msg_xfrd - bytes_to_transfer; + + while (bytes_to_transfer-- > 0) + writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA); + + return ret; +} + +static irqreturn_t axxia_i2c_isr(int irq, void *_dev) +{ + struct axxia_i2c_dev *idev = _dev; + u32 status; + + if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST)) + return IRQ_NONE; + + /* Read interrupt status bits */ + status = readl(idev->base + MST_INT_STATUS); + + if (!idev->msg) { + dev_warn(idev->dev, "unexpected interrupt\n"); + goto out; + } + + /* RX FIFO needs service? */ + if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL)) + axxia_i2c_empty_rx_fifo(idev); + + /* TX FIFO needs service? */ + if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) { + if (axxia_i2c_fill_tx_fifo(idev) == 0) + i2c_int_disable(idev, MST_STATUS_TFL); + } + + if (status & MST_STATUS_SCC) { + /* Stop completed */ + i2c_int_disable(idev, ~0); + complete(&idev->msg_complete); + } else if (status & MST_STATUS_SNS) { + /* Transfer done */ + i2c_int_disable(idev, ~0); + if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len) + axxia_i2c_empty_rx_fifo(idev); + complete(&idev->msg_complete); + } else if (unlikely(status & MST_STATUS_ERR)) { + /* Transfer error */ + i2c_int_disable(idev, ~0); + if (status & MST_STATUS_AL) + idev->msg_err = -EAGAIN; + else if (status & MST_STATUS_NAK) + idev->msg_err = -ENXIO; + else + idev->msg_err = -EIO; + dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n", + status, + idev->msg->addr, + readl(idev->base + MST_RX_BYTES_XFRD), + readl(idev->base + MST_RX_XFER), + readl(idev->base + MST_TX_BYTES_XFRD), + readl(idev->base + MST_TX_XFER)); + complete(&idev->msg_complete); + } + +out: + /* Clear interrupt */ + writel(INT_MST, idev->base + INTERRUPT_STATUS); + + return IRQ_HANDLED; +} + +static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS; + u32 rx_xfer, tx_xfer; + u32 addr_1, addr_2; + int ret; + + if (msg->len > 255) { + dev_warn(idev->dev, "unsupported length %u\n", msg->len); + return -EINVAL; + } + + idev->msg = msg; + idev->msg_xfrd = 0; + idev->msg_err = 0; + reinit_completion(&idev->msg_complete); + + if (i2c_m_ten(msg)) { + /* 10-bit address + * addr_1: 5'b11110 | addr[9:8] | (R/nW) + * addr_2: addr[7:0] + */ + addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06); + addr_2 = msg->addr & 0xFF; + } else { + /* 7-bit address + * addr_1: addr[6:0] | (R/nW) + * addr_2: dont care + */ + addr_1 = (msg->addr << 1) & 0xFF; + addr_2 = 0; + } + + if (i2c_m_rd(msg)) { + /* I2C read transfer */ + rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len; + tx_xfer = 0; + addr_1 |= 1; /* Set the R/nW bit of the address */ + } else { + /* I2C write transfer */ + rx_xfer = 0; + tx_xfer = msg->len; + } + + writel(rx_xfer, idev->base + MST_RX_XFER); + writel(tx_xfer, idev->base + MST_TX_XFER); + writel(addr_1, idev->base + MST_ADDR_1); + writel(addr_2, idev->base + MST_ADDR_2); + + if (i2c_m_rd(msg)) + int_mask |= MST_STATUS_RFL; + else if (axxia_i2c_fill_tx_fifo(idev) != 0) + int_mask |= MST_STATUS_TFL; + + /* Start manual mode */ + writel(CMD_MANUAL, idev->base + MST_COMMAND); + + i2c_int_enable(idev, int_mask); + + ret = wait_for_completion_timeout(&idev->msg_complete, + I2C_XFER_TIMEOUT); + + i2c_int_disable(idev, int_mask); + + if (readl(idev->base + MST_COMMAND) & CMD_BUSY) + dev_warn(idev->dev, "busy after xfer\n"); + + if (ret == 0) + idev->msg_err = -ETIMEDOUT; + + if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO) + axxia_i2c_init(idev); + + return idev->msg_err; +} + +static int axxia_i2c_stop(struct axxia_i2c_dev *idev) +{ + u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC; + int ret; + + reinit_completion(&idev->msg_complete); + + /* Issue stop */ + writel(0xb, idev->base + MST_COMMAND); + i2c_int_enable(idev, int_mask); + ret = wait_for_completion_timeout(&idev->msg_complete, + I2C_STOP_TIMEOUT); + i2c_int_disable(idev, int_mask); + if (ret == 0) + return -ETIMEDOUT; + + if (readl(idev->base + MST_COMMAND) & CMD_BUSY) + dev_warn(idev->dev, "busy after stop\n"); + + return 0; +} + +static int +axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct axxia_i2c_dev *idev = i2c_get_adapdata(adap); + int i; + int ret = 0; + + for (i = 0; ret == 0 && i < num; ++i) + ret = axxia_i2c_xfer_msg(idev, &msgs[i]); + + axxia_i2c_stop(idev); + + return ret ? : i; +} + +static u32 axxia_i2c_func(struct i2c_adapter *adap) +{ + u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | + I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA); + return caps; +} + +static const struct i2c_algorithm axxia_i2c_algo = { + .master_xfer = axxia_i2c_xfer, + .functionality = axxia_i2c_func, +}; + +static int axxia_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct axxia_i2c_dev *idev = NULL; + struct resource *res; + void __iomem *base; + int irq; + int ret = 0; + + idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL); + if (!idev) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "missing interrupt resource\n"); + return irq; + } + + idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c"); + if (IS_ERR(idev->i2c_clk)) { + dev_err(&pdev->dev, "missing clock\n"); + return PTR_ERR(idev->i2c_clk); + } + + idev->base = base; + idev->dev = &pdev->dev; + init_completion(&idev->msg_complete); + + of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate); + if (idev->bus_clk_rate == 0) + idev->bus_clk_rate = 100000; /* default clock rate */ + + ret = axxia_i2c_init(idev); + if (ret) { + dev_err(&pdev->dev, "failed to initialize\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0, + pdev->name, idev); + if (ret) { + dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq); + return ret; + } + + clk_prepare_enable(idev->i2c_clk); + + i2c_set_adapdata(&idev->adapter, idev); + strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name)); + idev->adapter.owner = THIS_MODULE; + idev->adapter.algo = &axxia_i2c_algo; + idev->adapter.dev.parent = &pdev->dev; + idev->adapter.dev.of_node = pdev->dev.of_node; + + platform_set_drvdata(pdev, idev); + + ret = i2c_add_adapter(&idev->adapter); + if (ret) { + dev_err(&pdev->dev, "failed to add adapter\n"); + return ret; + } + + return 0; +} + +static int axxia_i2c_remove(struct platform_device *pdev) +{ + struct axxia_i2c_dev *idev = platform_get_drvdata(pdev); + + clk_disable_unprepare(idev->i2c_clk); + i2c_del_adapter(&idev->adapter); + + return 0; +} + +/* Match table for of_platform binding */ +static const struct of_device_id axxia_i2c_of_match[] = { + { .compatible = "lsi,api2c", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, axxia_i2c_of_match); + +static struct platform_driver axxia_i2c_driver = { + .probe = axxia_i2c_probe, + .remove = axxia_i2c_remove, + .driver = { + .name = "axxia-i2c", + .of_match_table = axxia_i2c_of_match, + }, +}; + +module_platform_driver(axxia_i2c_driver); + +MODULE_DESCRIPTION("Axxia I2C Bus driver"); +MODULE_AUTHOR("Anders Berg "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 0b26c845dfd554dd9030efbf0249d3830251e58b Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 30 Sep 2014 13:04:53 +0300 Subject: i2c: designware: Default to fast mode in case of ACPI There is no way in ACPI to tell in which speed the host controller is supposed to run, so we default to fast mode (400KHz). Since this has been the default all the time there should be no functional changes with this change. This is the first step required to refactor the driver probe so that we can supply source clock from ACPI part of the driver to the core. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4d6a6b94e2fa..353adc4dc583 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -80,7 +80,6 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST; if (!ACPI_HANDLE(&pdev->dev)) return -ENODEV; @@ -93,10 +92,9 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) * Try to get SDA hold time and *CNT values from an ACPI method if * it exists for both supported speed modes. */ - dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, - fs_mode ? NULL : &dev->sda_hold_time); + dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt, NULL); dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, - fs_mode ? &dev->sda_hold_time : NULL); + &dev->sda_hold_time); return 0; } -- cgit v1.2.3 From 925ddb240d6c76e56dd3aa22493f5755c452ba61 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 30 Sep 2014 13:04:54 +0300 Subject: i2c: designware: Rework probe() to get clock a bit later In order to be able to create missing clock for AMD (and in future possibly others) we move getting clock for the device a bit later. Also make ACPI/DT configuration in the same place depending on from where the device was enumerated from. Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 38 ++++++++++++++--------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 353adc4dc583..e59c63ae4d41 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -81,9 +81,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - if (!ACPI_HANDLE(&pdev->dev)) - return -ENODEV; - dev->adapter.nr = -1; dev->tx_fifo_depth = 32; dev->rx_fifo_depth = 32; @@ -123,7 +120,7 @@ static int dw_i2c_probe(struct platform_device *pdev) struct resource *mem; struct dw_i2c_platform_data *pdata; int irq, r; - u32 clk_freq; + u32 clk_freq, ht = 0; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -146,24 +143,14 @@ static int dw_i2c_probe(struct platform_device *pdev) dev->irq = irq; platform_set_drvdata(pdev, dev); - dev->clk = devm_clk_get(&pdev->dev, NULL); - dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; - - if (IS_ERR(dev->clk)) - return PTR_ERR(dev->clk); - clk_prepare_enable(dev->clk); - /* fast mode by default because of legacy reasons */ clk_freq = 400000; - if (pdev->dev.of_node) { - u32 ht = 0; - u32 ic_clk = dev->get_clk_rate_khz(dev); - + if (ACPI_COMPANION(&pdev->dev)) { + dw_i2c_acpi_configure(pdev); + } else if (pdev->dev.of_node) { of_property_read_u32(pdev->dev.of_node, "i2c-sda-hold-time-ns", &ht); - dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, - 1000000); of_property_read_u32(pdev->dev.of_node, "i2c-sda-falling-time-ns", @@ -202,9 +189,20 @@ static int dw_i2c_probe(struct platform_device *pdev) dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; - /* Try first if we can configure the device from ACPI */ - r = dw_i2c_acpi_configure(pdev); - if (r) { + dev->clk = devm_clk_get(&pdev->dev, NULL); + dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; + if (IS_ERR(dev->clk)) + return PTR_ERR(dev->clk); + clk_prepare_enable(dev->clk); + + if (!dev->sda_hold_time && ht) { + u32 ic_clk = dev->get_clk_rate_khz(dev); + + dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000, + 1000000); + } + + if (!dev->tx_fifo_depth) { u32 param1 = i2c_dw_read_comp_param(dev); dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; -- cgit v1.2.3 From a445900c906092f3b49ee40a7365d0d54acc568e Mon Sep 17 00:00:00 2001 From: Carl Peng Date: Tue, 30 Sep 2014 13:04:55 +0300 Subject: i2c: designware: Add support for AMD I2C controller Add support for AMD version of the DW I2C host controller. The device is enumerated from ACPI namespace with ACPI ID AMD0010. Because the core driver needs an input source clock, and this is not an Intel LPSS device where clocks are provided through drivers/acpi/acpi_lpss.c, we register the clock ourselves if the clock rate is given in ->driver_data Signed-off-by: Carl Peng Signed-off-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-designware-platdrv.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index e1d491b0b9c9..242f491cf581 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -434,6 +434,7 @@ config I2C_DESIGNWARE_CORE config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" select I2C_DESIGNWARE_CORE + depends on (ACPI && COMMON_CLK) || !ACPI help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index e59c63ae4d41..a7431150acf7 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -80,6 +81,7 @@ static void dw_i2c_acpi_params(struct platform_device *pdev, char method[], static int dw_i2c_acpi_configure(struct platform_device *pdev) { struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + const struct acpi_device_id *id; dev->adapter.nr = -1; dev->tx_fifo_depth = 32; @@ -93,9 +95,29 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev) dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt, &dev->sda_hold_time); + /* + * Provide a way for Designware I2C host controllers that are not + * based on Intel LPSS to specify their input clock frequency via + * id->driver_data. + */ + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + clk_register_fixed_rate(&pdev->dev, dev_name(&pdev->dev), NULL, + CLK_IS_ROOT, id->driver_data); + return 0; } +static void dw_i2c_acpi_unconfigure(struct platform_device *pdev) +{ + struct dw_i2c_dev *dev = platform_get_drvdata(pdev); + const struct acpi_device_id *id; + + id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev); + if (id && id->driver_data) + clk_unregister(dev->clk); +} + static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT33C2", 0 }, { "INT33C3", 0 }, @@ -103,6 +125,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = { { "INT3433", 0 }, { "80860F41", 0 }, { "808622C1", 0 }, + { "AMD0010", 133 * 1000 * 1000 }, { } }; MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); @@ -111,6 +134,7 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev) { return -ENODEV; } +static inline void dw_i2c_acpi_unconfigure(struct platform_device *pdev) { } #endif static int dw_i2c_probe(struct platform_device *pdev) @@ -258,6 +282,9 @@ static int dw_i2c_remove(struct platform_device *pdev) pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); + if (ACPI_COMPANION(&pdev->dev)) + dw_i2c_acpi_unconfigure(pdev); + return 0; } -- cgit v1.2.3 From a4ce47f108a6df129c9f4345c6dda0473cb68da5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 4 Oct 2014 09:17:27 -0300 Subject: i2c-imx: Disable the clock on probe failure In the case of errors during probe, we should disable i2c_imx->clk. Signed-off-by: Fabio Estevam Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index ceff87cec18e..c48e46af670a 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -710,7 +710,7 @@ static int i2c_imx_probe(struct platform_device *pdev) pdev->name, i2c_imx); if (ret) { dev_err(&pdev->dev, "can't claim irq %d\n", irq); - return ret; + goto clk_disable; } /* Init queue */ @@ -735,7 +735,7 @@ static int i2c_imx_probe(struct platform_device *pdev) ret = i2c_add_numbered_adapter(&i2c_imx->adapter); if (ret < 0) { dev_err(&pdev->dev, "registration failed\n"); - return ret; + goto clk_disable; } /* Set up platform driver data */ @@ -749,6 +749,10 @@ static int i2c_imx_probe(struct platform_device *pdev) dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); return 0; /* Return OK */ + +clk_disable: + clk_disable_unprepare(i2c_imx->clk); + return ret; } static int i2c_imx_remove(struct platform_device *pdev) -- cgit v1.2.3 From 15ef27756b23a9fe5ec637a92c40dabd31aa38f6 Mon Sep 17 00:00:00 2001 From: Wei Yan Date: Tue, 7 Oct 2014 09:04:12 +0800 Subject: i2c: hix5hd2: add i2c controller driver I2C drivers for hix5hd2 soc series, including following chipset Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100. Signed-off-by: Wei Yan Signed-off-by: Zhangfei Gao [wsa: folded dt docs into this patch] Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-hix5hd2.txt | 24 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-hix5hd2.c | 557 +++++++++++++++++++++ 4 files changed, 592 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt create mode 100644 drivers/i2c/busses/i2c-hix5hd2.c (limited to 'drivers/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt new file mode 100644 index 000000000000..f98b37401e6e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt @@ -0,0 +1,24 @@ +I2C for Hisilicon hix5hd2 chipset platform + +Required properties: +- compatible: Must be "hisilicon,hix5hd2-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; +- clocks: phandles to input clocks. + +Optional properties: +- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 +- Child nodes conforming to i2c bus binding + +Examples: +I2C0@f8b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0xf8b10000 0x1000>; + interrupts = <0 38 4>; + clocks = <&clock HIX5HD2_I2C0_RST>; + #address-cells = <1>; + #size-cells = <0>; +} diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 242f491cf581..5366d37f04d3 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -77,6 +77,16 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. +config I2C_HIX5HD2 + tristate "Hix5hd2 high-speed I2C driver" + depends on ARCH_HIX5HD2 + help + Say Y here to include support for high-speed I2C controller in the + Hisilicon based hix5hd2 SoCs. + + This driver can also be built as a module. If so, the module + will be called i2c-hix5hd2. + config I2C_I801 tristate "Intel 82801 (ICH/PCH)" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 9fb33fab9bfd..78d56c54ba2b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o +obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c new file mode 100644 index 000000000000..9490d0f4255c --- /dev/null +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -0,0 +1,557 @@ +/* + * Copyright (c) 2014 Linaro Ltd. + * Copyright (c) 2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Now only support 7 bit address. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register Map */ +#define HIX5I2C_CTRL 0x00 +#define HIX5I2C_COM 0x04 +#define HIX5I2C_ICR 0x08 +#define HIX5I2C_SR 0x0c +#define HIX5I2C_SCL_H 0x10 +#define HIX5I2C_SCL_L 0x14 +#define HIX5I2C_TXR 0x18 +#define HIX5I2C_RXR 0x1c + +/* I2C_CTRL_REG */ +#define I2C_ENABLE BIT(8) +#define I2C_UNMASK_TOTAL BIT(7) +#define I2C_UNMASK_START BIT(6) +#define I2C_UNMASK_END BIT(5) +#define I2C_UNMASK_SEND BIT(4) +#define I2C_UNMASK_RECEIVE BIT(3) +#define I2C_UNMASK_ACK BIT(2) +#define I2C_UNMASK_ARBITRATE BIT(1) +#define I2C_UNMASK_OVER BIT(0) +#define I2C_UNMASK_ALL (I2C_UNMASK_ACK | I2C_UNMASK_OVER) + +/* I2C_COM_REG */ +#define I2C_NO_ACK BIT(4) +#define I2C_START BIT(3) +#define I2C_READ BIT(2) +#define I2C_WRITE BIT(1) +#define I2C_STOP BIT(0) + +/* I2C_ICR_REG */ +#define I2C_CLEAR_START BIT(6) +#define I2C_CLEAR_END BIT(5) +#define I2C_CLEAR_SEND BIT(4) +#define I2C_CLEAR_RECEIVE BIT(3) +#define I2C_CLEAR_ACK BIT(2) +#define I2C_CLEAR_ARBITRATE BIT(1) +#define I2C_CLEAR_OVER BIT(0) +#define I2C_CLEAR_ALL (I2C_CLEAR_START | I2C_CLEAR_END | \ + I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \ + I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \ + I2C_CLEAR_OVER) + +/* I2C_SR_REG */ +#define I2C_BUSY BIT(7) +#define I2C_START_INTR BIT(6) +#define I2C_END_INTR BIT(5) +#define I2C_SEND_INTR BIT(4) +#define I2C_RECEIVE_INTR BIT(3) +#define I2C_ACK_INTR BIT(2) +#define I2C_ARBITRATE_INTR BIT(1) +#define I2C_OVER_INTR BIT(0) + +#define HIX5I2C_MAX_FREQ 400000 /* 400k */ +#define HIX5I2C_READ_OPERATION 0x01 + +enum hix5hd2_i2c_state { + HIX5I2C_STAT_RW_ERR = -1, + HIX5I2C_STAT_INIT, + HIX5I2C_STAT_RW, + HIX5I2C_STAT_SND_STOP, + HIX5I2C_STAT_RW_SUCCESS, +}; + +struct hix5hd2_i2c_priv { + struct i2c_adapter adap; + struct i2c_msg *msg; + struct completion msg_complete; + unsigned int msg_idx; + unsigned int msg_len; + int stop; + void __iomem *regs; + struct clk *clk; + struct device *dev; + spinlock_t lock; /* IRQ synchronization */ + int err; + unsigned int freq; + enum hix5hd2_i2c_state state; +}; + +static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv) +{ + u32 val = readl_relaxed(priv->regs + HIX5I2C_SR); + + writel_relaxed(val, priv->regs + HIX5I2C_ICR); + + return val; +} + +static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv) +{ + writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR); +} + +static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv) +{ + writel_relaxed(0, priv->regs + HIX5I2C_CTRL); +} + +static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv) +{ + writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL, + priv->regs + HIX5I2C_CTRL); +} + +static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv) +{ + u32 rate, val; + u32 scl, sysclock; + + /* close all i2c interrupt */ + val = readl_relaxed(priv->regs + HIX5I2C_CTRL); + writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL); + + rate = priv->freq; + sysclock = clk_get_rate(priv->clk); + scl = (sysclock / (rate * 2)) / 2 - 1; + writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H); + writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L); + + /* restore original interrupt*/ + writel_relaxed(val, priv->regs + HIX5I2C_CTRL); + + dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n", + __func__, sysclock, rate, scl); +} + +static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv) +{ + hix5hd2_i2c_disable_irq(priv); + hix5hd2_i2c_drv_setrate(priv); + hix5hd2_i2c_clr_all_irq(priv); + hix5hd2_i2c_enable_irq(priv); +} + +static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv) +{ + clk_disable_unprepare(priv->clk); + msleep(20); + clk_prepare_enable(priv->clk); + hix5hd2_i2c_init(priv); +} + +static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv) +{ + unsigned long stop_time; + u32 int_status; + + /* wait for 100 milli seconds for the bus to be idle */ + stop_time = jiffies + msecs_to_jiffies(100); + do { + int_status = hix5hd2_i2c_clr_pend_irq(priv); + if (!(int_status & I2C_BUSY)) + return 0; + + usleep_range(50, 200); + } while (time_before(jiffies, stop_time)); + + return -EBUSY; +} + +static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv) +{ + if (priv->state == HIX5I2C_STAT_SND_STOP) + dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__); + else + dev_dbg(priv->dev, "%s: have not data to send\n", __func__); + + priv->state = HIX5I2C_STAT_RW_SUCCESS; + priv->err = 0; +} + +static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv) +{ + if (priv->stop) { + priv->state = HIX5I2C_STAT_SND_STOP; + writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM); + } else { + hix5hd2_rw_over(priv); + } +} + +static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv) +{ + if (priv->msg_len == 1) { + /* the last byte don't need send ACK */ + writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM); + } else if (priv->msg_len > 1) { + /* if i2c master receive data will send ACK */ + writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM); + } else { + hix5hd2_rw_handle_stop(priv); + } +} + +static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv) +{ + u8 data; + + if (priv->msg_len > 0) { + data = priv->msg->buf[priv->msg_idx++]; + writel_relaxed(data, priv->regs + HIX5I2C_TXR); + writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM); + } else { + hix5hd2_rw_handle_stop(priv); + } +} + +static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv) +{ + u8 data; + + if (priv->state == HIX5I2C_STAT_INIT) { + priv->state = HIX5I2C_STAT_RW; + } else if (priv->state == HIX5I2C_STAT_RW) { + if (priv->msg->flags & I2C_M_RD) { + data = readl_relaxed(priv->regs + HIX5I2C_RXR); + priv->msg->buf[priv->msg_idx++] = data; + } + priv->msg_len--; + } else { + dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n", + __func__, priv->state, priv->msg_len); + return -EAGAIN; + } + return 0; +} + +static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id) +{ + struct hix5hd2_i2c_priv *priv = dev_id; + u32 int_status; + int ret; + + spin_lock(&priv->lock); + + int_status = hix5hd2_i2c_clr_pend_irq(priv); + + /* handle error */ + if (int_status & I2C_ARBITRATE_INTR) { + /* bus error */ + dev_dbg(priv->dev, "ARB bus loss\n"); + priv->err = -EAGAIN; + priv->state = HIX5I2C_STAT_RW_ERR; + goto stop; + } else if (int_status & I2C_ACK_INTR) { + /* ack error */ + dev_dbg(priv->dev, "No ACK from device\n"); + priv->err = -ENXIO; + priv->state = HIX5I2C_STAT_RW_ERR; + goto stop; + } + + if (int_status & I2C_OVER_INTR) { + if (priv->msg_len > 0) { + ret = hix5hd2_rw_preprocess(priv); + if (ret) { + priv->err = ret; + priv->state = HIX5I2C_STAT_RW_ERR; + goto stop; + } + if (priv->msg->flags & I2C_M_RD) + hix5hd2_read_handle(priv); + else + hix5hd2_write_handle(priv); + } else { + hix5hd2_rw_over(priv); + } + } + +stop: + if ((priv->state == HIX5I2C_STAT_RW_SUCCESS && + priv->msg->len == priv->msg_idx) || + (priv->state == HIX5I2C_STAT_RW_ERR)) { + hix5hd2_i2c_disable_irq(priv); + hix5hd2_i2c_clr_pend_irq(priv); + complete(&priv->msg_complete); + } + + spin_unlock(&priv->lock); + + return IRQ_HANDLED; +} + +static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop) +{ + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + hix5hd2_i2c_clr_all_irq(priv); + hix5hd2_i2c_enable_irq(priv); + + if (priv->msg->flags & I2C_M_RD) + writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION, + priv->regs + HIX5I2C_TXR); + else + writel_relaxed(priv->msg->addr << 1, + priv->regs + HIX5I2C_TXR); + + writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv, + struct i2c_msg *msgs, int stop) +{ + unsigned long timeout; + int ret; + + priv->msg = msgs; + priv->msg_idx = 0; + priv->msg_len = priv->msg->len; + priv->stop = stop; + priv->err = 0; + priv->state = HIX5I2C_STAT_INIT; + + reinit_completion(&priv->msg_complete); + hix5hd2_i2c_message_start(priv, stop); + + timeout = wait_for_completion_timeout(&priv->msg_complete, + priv->adap.timeout); + if (timeout == 0) { + priv->state = HIX5I2C_STAT_RW_ERR; + priv->err = -ETIMEDOUT; + dev_warn(priv->dev, "%s timeout=%d\n", + msgs->flags & I2C_M_RD ? "rx" : "tx", + priv->adap.timeout); + } + ret = priv->state; + + /* + * If this is the last message to be transfered (stop == 1) + * Then check if the bus can be brought back to idle. + */ + if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop) + ret = hix5hd2_i2c_wait_bus_idle(priv); + + if (ret < 0) + hix5hd2_i2c_reset(priv); + + return priv->err; +} + +static int hix5hd2_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap); + int i, ret, stop; + + pm_runtime_get_sync(priv->dev); + + for (i = 0; i < num; i++, msgs++) { + stop = (i == num - 1); + ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop); + if (ret < 0) + goto out; + } + + if (i == num) { + ret = num; + } else { + /* Only one message, cannot access the device */ + if (i == 1) + ret = -EREMOTEIO; + else + ret = i; + + dev_warn(priv->dev, "xfer message failed\n"); + } + +out: + pm_runtime_mark_last_busy(priv->dev); + pm_runtime_put_autosuspend(priv->dev); + return ret; +} + +static u32 hix5hd2_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_algorithm hix5hd2_i2c_algorithm = { + .master_xfer = hix5hd2_i2c_xfer, + .functionality = hix5hd2_i2c_func, +}; + +static int hix5hd2_i2c_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct hix5hd2_i2c_priv *priv; + struct resource *mem; + unsigned int freq; + int irq, ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + if (of_property_read_u32(np, "clock-frequency", &freq)) { + /* use 100k as default value */ + priv->freq = 100000; + } else { + if (freq > HIX5I2C_MAX_FREQ) { + priv->freq = HIX5I2C_MAX_FREQ; + dev_warn(priv->dev, "use max freq %d instead\n", + HIX5I2C_MAX_FREQ); + } else { + priv->freq = freq; + } + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(&pdev->dev, mem); + if (IS_ERR(priv->regs)) + return PTR_ERR(priv->regs); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n"); + return irq; + } + + priv->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + return PTR_ERR(priv->clk); + } + clk_prepare_enable(priv->clk); + + strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name)); + priv->dev = &pdev->dev; + priv->adap.owner = THIS_MODULE; + priv->adap.algo = &hix5hd2_i2c_algorithm; + priv->adap.retries = 3; + priv->adap.dev.of_node = np; + priv->adap.algo_data = priv; + priv->adap.dev.parent = &pdev->dev; + i2c_set_adapdata(&priv->adap, priv); + platform_set_drvdata(pdev, priv); + spin_lock_init(&priv->lock); + init_completion(&priv->msg_complete); + + hix5hd2_i2c_init(priv); + + ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + dev_name(&pdev->dev), priv); + if (ret != 0) { + dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq); + goto err_clk; + } + + pm_suspend_ignore_children(&pdev->dev, true); + pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(priv->dev); + pm_runtime_set_active(priv->dev); + pm_runtime_enable(priv->dev); + + ret = i2c_add_adapter(&priv->adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + goto err_runtime; + } + + return ret; + +err_runtime: + pm_runtime_disable(priv->dev); + pm_runtime_set_suspended(priv->dev); +err_clk: + clk_disable_unprepare(priv->clk); + return ret; +} + +static int hix5hd2_i2c_remove(struct platform_device *pdev) +{ + struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); + + i2c_del_adapter(&priv->adap); + pm_runtime_disable(priv->dev); + pm_runtime_set_suspended(priv->dev); + + return 0; +} + +#ifdef CONFIG_PM +static int hix5hd2_i2c_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static int hix5hd2_i2c_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev); + + clk_prepare_enable(priv->clk); + hix5hd2_i2c_init(priv); + + return 0; +} +#endif + +static const struct dev_pm_ops hix5hd2_i2c_pm_ops = { + SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend, + hix5hd2_i2c_runtime_resume, + NULL) +}; + +static const struct of_device_id hix5hd2_i2c_match[] = { + { .compatible = "hisilicon,hix5hd2-i2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match); + +static struct platform_driver hix5hd2_i2c_driver = { + .probe = hix5hd2_i2c_probe, + .remove = hix5hd2_i2c_remove, + .driver = { + .name = "hix5hd2-i2c", + .pm = &hix5hd2_i2c_pm_ops, + .of_match_table = hix5hd2_i2c_match, + }, +}; + +module_platform_driver(hix5hd2_i2c_driver); + +MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver"); +MODULE_AUTHOR("Wei Yan "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:i2c-hix5hd2"); -- cgit v1.2.3 From 3e27a8445c21f8056517f188303827450590d868 Mon Sep 17 00:00:00 2001 From: "james.d.ralston@intel.com" Date: Mon, 13 Oct 2014 15:20:24 -0700 Subject: i2c: i801: Add Device IDs for Intel Sunrise Point PCH This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH. Signed-off-by: James Ralston Signed-off-by: Wolfram Sang --- Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 3 +++ 3 files changed, 5 insertions(+) (limited to 'drivers/i2c') diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index e9c803ea306d..793c83dac738 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -28,6 +28,7 @@ Supported adapters: * Intel Wildcat Point (PCH) * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) + * Intel Sunrise Point-H (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5366d37f04d3..fd5f10a86209 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -122,6 +122,7 @@ config I2C_I801 Wildcat Point (PCH) Wildcat Point-LP (PCH) BayTrail (SOC) + Sunrise Point-H (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 10467a327749..7cfc183b3d63 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -62,6 +62,7 @@ * Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes + * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -184,6 +185,7 @@ #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 struct i801_mux_config { char *gpio_chip; @@ -830,6 +832,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, { 0, } }; -- cgit v1.2.3