From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/i2c/busses/i2c-viapro.c | 458 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 drivers/i2c/busses/i2c-viapro.c (limited to 'drivers/i2c/busses/i2c-viapro.c') diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c new file mode 100644 index 000000000000..0bb60a636e16 --- /dev/null +++ b/drivers/i2c/busses/i2c-viapro.c @@ -0,0 +1,458 @@ +/* + i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2002 Frodo Looijaard , + Philip Edelbrock , Kyösti Mälkki , + Mark D. Studebaker + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports Via devices: + 82C596A/B (0x3050) + 82C596B (0x3051) + 82C686A/B + 8231 + 8233 + 8233A (0x3147 and 0x3177) + 8235 + 8237 + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct pci_dev *vt596_pdev; + +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 + +/* SMBus address offsets */ +static unsigned short vt596_smba; +#define SMBHSTSTS (vt596_smba + 0) +#define SMBHSLVSTS (vt596_smba + 1) +#define SMBHSTCNT (vt596_smba + 2) +#define SMBHSTCMD (vt596_smba + 3) +#define SMBHSTADD (vt596_smba + 4) +#define SMBHSTDAT0 (vt596_smba + 5) +#define SMBHSTDAT1 (vt596_smba + 6) +#define SMBBLKDAT (vt596_smba + 7) +#define SMBSLVCNT (vt596_smba + 8) +#define SMBSHDWCMD (vt596_smba + 9) +#define SMBSLVEVT (vt596_smba + 0xA) +#define SMBSLVDAT (vt596_smba + 0xC) + +/* PCI Address Constants */ + +/* SMBus data in configuration space can be found in two places, + We try to select the better one*/ + +static unsigned short smb_cf_hstcfg = 0xD2; + +#define SMBHSTCFG (smb_cf_hstcfg) +#define SMBSLVC (smb_cf_hstcfg + 1) +#define SMBSHDW1 (smb_cf_hstcfg + 2) +#define SMBSHDW2 (smb_cf_hstcfg + 3) +#define SMBREV (smb_cf_hstcfg + 4) + +/* Other settings */ +#define MAX_TIMEOUT 500 +#define ENABLE_INT9 0 + +/* VT82C596 constants */ +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 + + +/* If force is set to anything different from 0, we forcibly enable the + VT596. DANGEROUS! */ +static int force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); + +/* If force_addr is set to anything different from 0, we forcibly enable + the VT596 at the given address. VERY DANGEROUS! */ +static u16 force_addr; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the SMBus at the given address. " + "EXTREMELY DANGEROUS!"); + + +static struct i2c_adapter vt596_adapter; + +/* Another internally used function */ +static int vt596_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " + "Resetting...\n", temp); + + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); + + return -1; + } else { + dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + } + } + + /* start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + + /* We will always wait for a fraction of a second! + I don't know if VIA needs this, Intel did */ + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + result = -1; + dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + } + + if (temp & 0x10) { + result = -1; + dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -1; + dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " + "locked until next hard\nreset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -1; + dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + } + + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_warn(&vt596_adapter.dev, "Failed reset at end " + "of transaction (%02x)\n", temp); + } + } + + dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + return result; +} + +/* Return -1 on error. */ +static s32 vt596_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + int i, len; + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_info(&vt596_adapter.dev, + "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = VT596_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = VT596_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = VT596_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = VT596_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > I2C_SMBUS_BLOCK_MAX) + len = I2C_SMBUS_BLOCK_MAX; + outb_p(len, SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = VT596_BLOCK_DATA; + break; + } + + outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + + if (vt596_transaction()) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) + return 0; + + switch (size) { + case VT596_BYTE: + /* Where is the result put? I assume here it is in + * SMBHSTDAT0 but it might just as well be in the + * SMBHSTCMD. No clue in the docs + */ + data->byte = inb_p(SMBHSTDAT0); + break; + case VT596_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case VT596_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case VT596_BLOCK_DATA: + data->block[0] = inb_p(SMBHSTDAT0); + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMBBLKDAT); + break; + } + return 0; +} + +static u32 vt596_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = vt596_access, + .functionality = vt596_func, +}; + +static struct i2c_adapter vt596_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static int __devinit vt596_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned char temp; + int error = -ENODEV; + + /* Determine the address of the SMBus areas */ + if (force_addr) { + vt596_smba = force_addr & 0xfff0; + force = 0; + goto found; + } + + if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || + !(vt596_smba & 0x1)) { + /* try 2nd address and config reg. for 596 */ + if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && + !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && + (vt596_smba & 0x1)) { + smb_cf_hstcfg = 0x84; + } else { + /* no matches at all */ + dev_err(&pdev->dev, "Cannot configure " + "SMBus I/O Base address\n"); + return -ENODEV; + } + } + + vt596_smba &= 0xfff0; + if (vt596_smba == 0) { + dev_err(&pdev->dev, "SMBus base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); + return -ENODEV; + } + + found: + if (!request_region(vt596_smba, 8, "viapro-smbus")) { + dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", + vt596_smba); + return -ENODEV; + } + + pci_read_config_byte(pdev, SMBHSTCFG, &temp); + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the VT596 first. */ + if (force_addr) { + pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(pdev, id->driver_data, vt596_smba); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); + dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " + "address 0x%04x!\n", vt596_smba); + } else if ((temp & 1) == 0) { + if (force) { + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to + * this. + */ + pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + dev_info(&pdev->dev, "Enabling SMBus device\n"); + } else { + dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " + "controller not enabled! - upgrade BIOS or " + "use force=1\n"); + goto release_region; + } + } + + if ((temp & 0x0E) == 8) + dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); + else if ((temp & 0x0E) == 0) + dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); + else + dev_dbg(&pdev->dev, "Illegal Interrupt configuration " + "(or code out of date)!\n"); + + pci_read_config_byte(pdev, SMBREV, &temp); + dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + + vt596_adapter.dev.parent = &pdev->dev; + snprintf(vt596_adapter.name, I2C_NAME_SIZE, + "SMBus Via Pro adapter at %04x", vt596_smba); + + vt596_pdev = pci_dev_get(pdev); + if (i2c_add_adapter(&vt596_adapter)) { + pci_dev_put(vt596_pdev); + vt596_pdev = NULL; + } + + /* Always return failure here. This is to allow other drivers to bind + * to this pci device. We don't really want to have control over the + * pci device, we only wanted to read as few register values from it. + */ + return -ENODEV; + + release_region: + release_region(vt596_smba, 8); + return error; +} + +static struct pci_device_id vt596_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4), + .driver_data = SMBBA1 }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, vt596_ids); + +static struct pci_driver vt596_driver = { + .name = "vt596_smbus", + .id_table = vt596_ids, + .probe = vt596_probe, +}; + +static int __init i2c_vt596_init(void) +{ + return pci_register_driver(&vt596_driver); +} + + +static void __exit i2c_vt596_exit(void) +{ + pci_unregister_driver(&vt596_driver); + if (vt596_pdev != NULL) { + i2c_del_adapter(&vt596_adapter); + release_region(vt596_smba, 8); + pci_dev_put(vt596_pdev); + vt596_pdev = NULL; + } +} + +MODULE_AUTHOR( + "Frodo Looijaard and " + "Philip Edelbrock "); +MODULE_DESCRIPTION("vt82c596 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_vt596_init); +module_exit(i2c_vt596_exit); -- cgit v1.2.3