From 032f708bc4f6da868ec49dac48ddf3670d8035d3 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Wed, 22 Jan 2014 14:05:46 -0800 Subject: i2c: piix4: Add support for AMD ML and CZ SMBus changes The locations of SMBus register base address and enablement bit are changed from AMD ML, which need this patch to be supported. Signed-off-by: Shane Huang Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org --- drivers/i2c/busses/i2c-piix4.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) (limited to 'drivers/i2c/busses/i2c-piix4.c') diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index a028617b8f13..f71b4d381c00 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 - AMD Hudson-2, CZ + AMD Hudson-2, ML, CZ SMSC Victory66 Note: we assume there can only be one device, with one or more @@ -235,7 +235,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, { unsigned short piix4_smba; unsigned short smba_idx = 0xcd6; - u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en; + u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status; + u8 i2ccfg, i2ccfg_offset = 0x10; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { @@ -245,7 +246,15 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, } /* Determine the address of the SMBus areas */ - smb_en = (aux) ? 0x28 : 0x2c; + if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && + PIIX4_dev->revision >= 0x41) || + (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && + PIIX4_dev->device == 0x790b && + PIIX4_dev->revision >= 0x49)) + smb_en = 0x00; + else + smb_en = (aux) ? 0x28 : 0x2c; if (!request_region(smba_idx, 2, "smba_idx")) { dev_err(&PIIX4_dev->dev, "SMBus base address index region " @@ -258,13 +267,22 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, smba_en_hi = inb_p(smba_idx + 1); release_region(smba_idx, 2); - if ((smba_en_lo & 1) == 0) { + if (!smb_en) { + smb_en_status = smba_en_lo & 0x10; + piix4_smba = smba_en_hi << 8; + if (aux) + piix4_smba |= 0x20; + } else { + smb_en_status = smba_en_lo & 0x01; + piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; + } + + if (!smb_en_status) { dev_err(&PIIX4_dev->dev, "Host SMBus controller not enabled!\n"); return -ENODEV; } - piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; -- cgit v1.2.3